Hay Guys,
Anyone out there tell me how many yards of carbon fiber I will neen to do my
wings and tail section?
Robert Pesak
With the possible exception being the actual control surfaces themselves, if
things work out that you have to fabricate them separate. Otherwise, invest
in something else that yield actual improvements, i.e. better engine, wheel
pants, lighter high quality paint, Sensenich Prop, etc...
Colin Raine
Carbon fiber is my new favorite building material. ?I want to use carbon fiber
to build the belly board for my KR2. ?I used the material to extend my
horizontal stabilizer and I love the way it worked out.
So, do you believe that one eighth inch plywood sandwiched between carbon fiber
would be
>l. I want to use carbon fiber to build the belly board for my KR2.
++
I just finished my state and federal income taxes so this is an easy
question. I used 1/4 inch foam for a very similar sized board with
one layer of KR glass on each side
- Original message From:
bjoenunley via KRnet Date: 3/21/2016 9:31 PM
(GMT-06:00) To: KRnet Cc: bjoenunley Subject: KR> Carbon Fiber
???
Carbon fiber is my new favorite building material. ?I want to use carbon fiber
to build the belly board for my KR2. ?I used the material
I dont have a AS&S book or Wicks book but I know the fiberglass strength is in
there. Can someone give me the strengths of KR fiberglass, The carbon fiber
glass and the Kevlar. Comparing weight to strength.
Has anyone used Kevlar, it is a tad cheaper than carbon fiber and said to
be strong
Justin Wrote:
>Has anyone used Kevlar, it is a tad cheaper than carbon fiber and said to
be stronger and lighter than carbon >fiber.
Kevlar is not as strong when loaded in compression. It is mostly used for
impact resistance rather than structural applications. Replacing fibreglass
or carbon f
An HTML attachment was scrubbed...
URL:
http://mylist.net/private/krnet/attachments/20040209/dbb0af83/attachment.htm
Dave Jeltema wrote:
>>Has anyone coverd the wings with either carbon or kevlar? if so how was the
>>process different from glass?<<
Yes, see http://home.hiwaay.net/~langford/owings.html . The only difference in
using it is it's a little more difficult to tell when the fabric is completely
wet
Ron Smith please e-mail me off line. Mike Turner
Spin the prop, light the fire, dance among the starsN428CM
I was looking online yesterday for good prices on carbon fiber and found
this site. http://www.advancedcompositetraders.com/inven.html They have
style 282 cloth for $12.50 a yard. I checked in my last years Aircraft
Spruce catalog and they had 282 cloth for $25.75 a yard. This years catalog
has
Brian,
Most fibers used for laminating, including E and S glass and carbon fiber, have
a coating applied to the individual strands to enhance the adhesion of whatever
resin system would be used to glue everything together. That coating has a
5-year shelf life. My thought is if the shelf life i
, Inc.
www.engalt.com
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Wood, Sidney M.
Sent: Monday, May 24, 2004 8:18 AM
To: KRnet
Subject: RE: KR> carbon fiber
Brian,
Most fibers used for laminating, including E and S glass and carbon fiber
04 7:09 PM
To: KRnet
Subject: RE: KR> carbon fiber
I am sure that all three sources move enough CF that expiration is not a
problem, but perhaps the commercial grade dousn't have the coating to begin
with. I need to call Wicks tomorrow anyway so I will ask what the
difference is si
Duncan
It is not that carbon fiber is lighter, it is that it is 5 times stronger than
the same single lay up of regular E-glass, so it would take 5 layers of E-glass
to equal one layer of carbon fiber. There is where you get either light
weight, when it requires strength, so you use carbon fib
Netters,
Does anyone that is going to the Gathering have a 12 x 12 inch ³scrap²
of carbon fiber that you would be willing to part with? If so and you are
willing to bring it to Mt. Vernon, contact me off the net so we can make a
deal.
Mark Jones, how many more days until the Gathering?
Jim
HI netters,
Someone was skinning their plane in carbon fiber... can anyone tell me
who that was?
David Swanson
bdazzca...@aol.com
--
>From: bdazzca...@aol.com
>Reply-To: KRnet
>To: kr...@mylist.net
>Subject: KR> carbon fiber skin
>Date: Sun, 25 Jun 2006 23:09:29 EDT
>MIME-Version: 1.0
>Received: from lizard.esosoft.net ([38.118.200.18]) by
>bay0-mc8-f12.bay0.hotmail.com with Microsoft SMTPSVC(6.
Hi Netters,
I knew that Mark had his wings done in CF but I found someone awhile
ago that was skinning his fuselage in it too. He told me what size and how many
layers but cant remember who it was. Anyone know how many layers of glass
Eduardo is using down there in Chile with his fuselag
That must be an expensive KR.
See N64KR at http://KRBuilder.org - Then click on the pics
See you in Mt. Vernon - 2006 - KR Gathering
There is a time for building and a time for FLYING and the time for building
is OVER.
Daniel R. Heath - Lexington, SC
---Original Message---
I found someon
: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Dan Heath
Sent: Saturday, July 01, 2006 4:46 PM
To: kr...@mylist.net
Subject: Re: KR> carbon fiber skin
That must be an expensive KR.
See N64KR at http://KRBuilder.org - Then click on the pics
See you in Mt. Vernon - 2006 -
Hay Mark,
I'm getting ready to order my carbon fiber,I know you used cf on your wings and
it seems your happy with them.I guess the question I have is,How many layers
did you lay up, and what weight did you use? I think I'll just order it from
Wicks @ 33.12 per yard unless you can think of a bet
Does anyone have a favorite source for carbon fiber cloth?? I can tolerate
cloth with defects, I.e. broken threads, to keep the cost down.? Years ago
someone posted a source for seconds.
On Jul 19, 2014 6:28 AM, Steven Eberhart via KRnet
wrote:
>
> I know, this is in an RV but it is a pretty n
Date:08/07/2014 9:24 AM
(GMT-06:00) To: Steven Eberhart via KRnet
Subject: KR> Carbon fiber sources
Does anyone have a favorite source for carbon fiber cloth? I can
tolerate cloth with defects, I.e. broken threads, to keep the cost down. Years
ago someone posted a source for seconds.
O
Dean,
Your aircraft seat is much more elegant and weight saving than the lead lumps
that I have permanently bonded to my floor pan. Please keep us advised of your
progress on the backboard.
Jim Vance
Netters,
I am working up my horizontal and vertical stabilizers and was planning to
use Carbon Fiber to cover at least the control surfaces and maybe the entire
tail. A couple of people have mentioned that carbon fiber interferes with
radio signals. Any way to avoid this? Other thoughts?
Dean
From what I have been able to glean from various articles and
talking with several radio techs, the only around the problem is external
antennae. I plan on using Kevlar for high stress areas and "S-glass" for the
rest.
Doug Rupert
A couple of people have mentioned that carbon fiber interfe
Why do you need to isolate carbon fiber and metal? Will stainless steel
hardware work ok?
Sid Wood
Tri-gear KR-2 N6242
Mechanicsville, MD, USA
---
>> This is an example of the problem with many KR messages...a few words
>> dashe
Sid Wood wrote:
Metal corrosion is often the result of galvanic activity between dissimilar
metals. Carbon Fiber conducts electricity and acts like a metal. When
carbon fiber and metal are in contact, galvanic action will cause the metal
to corrode. Stainless steel is resistant to corrosion
Graphite is the most corrosive material on the galvanic tables...it will
cause just about anything except gold corrode...just put a layer of
something in between to prevent it from conducting across.
https://sites.google.com/site/mykr2stretch/
https://sites.google.com/site/mykr2stretch/parts-for-s
Graphite is the most corrosive material on the galvanic tables...it will
cause just about anything except gold corrode...just put a layer of
something in between to prevent it from conducting across.
https://sites.google.com/site/mykr2stretch/
https://sites.google.com/site/mykr2stretch/parts-for-s
Let me try that again...this time as "plain text" so it won't post a
blank.
Paul Visk wrote:
>>I made my with 3/32 birch. I followed Mark Langford's design...
Not quite...mine was made from 1/4" Lastofoam, rather than plywood.
I'll bet it's even stiffer than an eighth inch plywood base, as th
Just shoot me. I have to figure out how to make "plain text" the
default on this goofy web interface, if it's possible. See below...
I should add to this that given that you are putting holes in it,
plywood core does make perfect sense, and I would laminate it all
together and then cut the hole
>
>I should add to this that given that you are putting holes in it,
>plywood core does make perfect sense, and I would laminate it all
>together and then cut the holes. That's a lot easier than the other
>way, and it'll work fine.
>Mark Langford
++
> Carbon Fiber speed brake
>
>I should add to this that given that you are putting holes in it,
>plywood core does make perfect sense, and I would laminate it all
>together and then cut the holes.? That's a lot easier than the other
>way, and it'
I dont have a AS&S book or Wicks book but I know the fiberglass strength is
in there. Can someone give me the strengths of KR fiberglass, The carbon
fiber glass and the Kevlar. Comparing weight to strength.
Has anyone used Kevlar, it is a tad cheaper than carbon fiber and said
to be stronger a
at flyk...@wi.rr.com
Visit my KR-2S CorvAIRCRAFT web site at
http://mywebpage.netscape.com/n886mj/homepage.html
Subject: RE: KR>Carbon Fiber for Justin
> I dont have a AS&S book or Wicks book but I know the fiberglass strength
is
> in there. Can someone give me the strengths of KR fi
quot;Mark Jones"
To: "KR builders and pilots"
Sent: Wednesday, June 18, 2003 7:45 PM
Subject: Re: KR>Carbon Fiber for Justin
> Justin,
> I for one, am very pleased to see such an inquisitive mind concerning
> aviation. It is young fellows such as yourself that keeps
o: "KR builders and pilots"
Sent: Wednesday, June 18, 2003 7:45 PM
Subject: Re: KR>Carbon Fiber for Justin
> Justin,
> I for one, am very pleased to see such an inquisitive mind concerning
> aviation. It is young fellows such as yourself that keeps aviation going
> when u
> I know that carbon graphite can be brittle. I think it could build it
strong enough but would it be springy enough?
Carbon fiber is known for it's stiffness, but what you want in a gear leg is
just the opposite. I don't know of anybody that's using a carbon fiber gear
leg, and that alone is goo
I was working in the hangar tonight and took a few more pictures of the carbon
fiber air intake that I made. The front of the carb heat box has a K&N tapered
air filter on it and the air intake was laid up in such a way that it slips on
tight over the back flange of the filter but has a gap of
> I was working in the hangar tonight and took a few more pictures of the
> carbon fiber air intake that I made.
Nice looking setup, but I need to ask. Are those wood spacers between the
engine mount and the fire wall?
--
Eric Pitts
Terre Haute Ind.
http://eric.pitts.mystarband.net
"Life shou
Neal,
I have been viewing your construction pictures this morning as I sit out this
cold weather. I just wanted to say that you have put together some really great
construction pics that are not only great to look at for someone that is not in
the construction phase, but also a great resource
45 matches
Mail list logo