On 28 July 2010 06:57, Nathan Sandver wrote:
>
> The swap partition I created at wd1b is correctly listed in /etc/fstab:
> # cat /mnt/etc/fstab
> /dev/wd1b none swap sw 0 0
> /dev/wd0a / ffs rw 1 1
> /dev/wd1a /usr ffs rw,nodev 1 2
>
What happens when you remove the wd1b line from fstab?
Hi,
I have th following aim : Master OpenBSD, pass BSDP(OpenBSD)exam when this
one will be available.
I have good knowledege on TCP/IP;PF use
Is there a good training center in French or English language?
(I will be ready to buy a plane ticket.)
With these covered topics :
INSTALLATION
UNIX BASIC
Maybe anyone knows how can I get any debugging information about my device?
I could try to solve it on my own if I understood where the error is...
Dmitrij D. Czarkoff wrote:
> Hello!
>
> I'm trying to connect a wireless network on my ASUS R2Hv. Both the built-in
> and usb dongle wireless adapte
On 27. juli 2010, at 15.09, Pete Vickers wrote:
> Hi,
>
> From dmesg, the graphics card in my Sun blade100 is:
>
> machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
> machfb0: ATY,RageXL, 1280x1024
>
> which is connected via DVI cable to a Sun monitor #365-1429. This monitor
> supports 1280
On 07/28/10 04:44, open...@e-solutions.re wrote:
Hi,
I have th following aim : Master OpenBSD, pass BSDP(OpenBSD)exam when this
one will be available.
I have good knowledege on TCP/IP;PF use
Is there a good training center in French or English language?
(I will be ready to buy a plane ticket.)
W
Synproxy only appears to work on the interface with the default gateway
(egress). I could never make it work on a firewall with more than 1
external interface properly.
I don't know if this is a bug or by design.
Tom
On Wed, 28 Jul 2010 05:50:19 -0600
Chris Bennett wrote:
> My advice is to setup a server with some websites (doesn't matter if the
> are "real" or bogus) and learn to deal with the problems that pop-up. Be
> sure to get an ISP with remote IP-KVM so you can fix any mistakes that
> lock you out.
Hi,
I'm trying to get my head round Queue'ing / Atlq and have read
(http://www.openbsd.org/faq/pf/queueing.html).
We are getting a Gigabit connection to the local internet peering exchange, and
I would like to offer other tenants in our building internet access to help
offset our costs.
What
Pete Vickers wrote:
> From dmesg, the graphics card in my Sun blade100 is:
>
> machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
> machfb0: ATY,RageXL, 1280x1024
>
> which is connected via DVI cable to a Sun monitor #365-1429.
DVI? On a Blade 100?
> I thought that one of the big advan
On 07/28/10 07:49, Robert wrote:
On Wed, 28 Jul 2010 05:50:19 -0600
Chris Bennett wrote:
My advice is to setup a server with some websites (doesn't matter if the
are "real" or bogus) and learn to deal with the problems that pop-up. Be
sure to get an ISP with remote IP-KVM so you can fix any mis
Stefan Sperling wrote:
> Log message:
> Install the en_US.UTF-8 ctype locale support file, and allow the UTF-8
> ctype locale to be enabled via setlocale(3) (export LC_CTYPE='en_US.UTF-8').
>
> A lot of programs, especially from ports, will now start using UTF-8 if the
> UTF-8 locale is enabled
On 28/07/10 14:49, Robert wrote:
On Wed, 28 Jul 2010 05:50:19 -0600
Chris Bennett wrote:
My advice is to setup a server with some websites (doesn't matter if the
are "real" or bogus) and learn to deal with the problems that pop-up. Be
sure to get an ISP with remote IP-KVM so you can fix any
Buenos Dias/Tardes Sr/a:
La crema de Concha Nacar, borra manchas generadas por el paso de los
aqos, por el sol y aquellas producidas por el embarazo. Atenza todo tipo
de cicatrices, elimina el acni, los barritos y espinillas en forma rapida
y efectiva. Alivia las picaduras de insectos y elimi
| Maybe anyone knows how can I get any debugging information about my device?
| I could try to solve it on my own if I understood where the error is...
"ifconfig zyd0 debug" is usually a good start.
Damien
Little status update. We got one laptop ordered (thanks everyone!) and
are a few hundred short of the next. So if you care about these bugs
please pony up ;-)
/marco
On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> I have got a few pledges for hp laptops. I have gotten good (
On Wed, 28 Jul 2010 15:59:33 +0100
Michal wrote:
> Apart from ESXi is free but the management isn't...you need vSphere to
> manage the thing. This seams like a very expensive way to learn an
Just a note:
You don't need vSphere for this setup; only if you have to manage a
couple of vmware server
> On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> > I have got a few pledges for hp laptops. I have gotten good (as in bad)
> > test reports of the following models that fail one way or another:
> > * HP eb8730w
> > * HP nw9440
> > * HP Mini 5102
> > * HP 530
While I cannot don
On Wed, Jul 28, 2010 at 05:45:14PM +0200, Jan Stary wrote:
> > On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> > > I have got a few pledges for hp laptops. I have gotten good (as in bad)
> > > test reports of the following models that fail one way or another:
> > > * HP eb8730w
> Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
>
Hi,
I have an hp ProBook 4520s that has problem with acpi (boot only with
acpi disable).
Do you need my results for those commands?
Best regards.
--
Matteo Filippetto
> Date: Wed, 28 Jul 2010 05:50:19 -0600
> From: ch...@bennettconstruction.biz
> Concrete with re-bar works well for hardening the box.
> As far as the software, OpenBSD comes "pre-hardened".
> Nothing really needs to be changed for security.
> Use good passwords and long passwords is about all you
writes:
> I have th following aim : Master OpenBSD, pass BSDP(OpenBSD)exam when this
> one will be available.
> I have good knowledege on TCP/IP;PF use
> Is there a good training center in French or English language?
> (I will be ready to buy a plane ticket.)
Assuming the EuroBSDCon programme tu
On Wed, Jul 28, 2010 at 9:21 AM, matteo filippetto
wrote:
>> Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
>>
>
> Hi,
>
> I have an hp ProBook 4520s that has problem with acpi (boot only with
> acpi disable).
>
> Do you need my results for those commands?
Only if you want it fixed.
Hello
I have a Compaq Presario 3019US working correctly with OBSD-4.7, and i
have recived a ThinkPad Edge 14 i330 (4 processors) as a present; it
has Windows 7.
The parttions do not finish at the end of cilinders by defaults. My
question is if you recomend keeping Windows 7 beside to OBSD working
Well, only one interface is set to be a default gateway out, the
other has an IP with no gateway, but a manual route entry for how to
reach the client machine. I've also tried applying the synproxy rules on
the interface facing the client heading outbound to no avail.
On 7/28/2010 5:26 AM,
fqui nonez wrote:
> this Laptop has an extra key (fn) which i could not find how to use it
> to jump to TTYs.
As I understand, Fn key doesn't send a separate keypress event and therefor
can't be remapped.
>Another question is related to use ix86 or amd64?
i386 is much better tested, but amd64 s
damien.bergam...@free.fr wrote:
> "ifconfig zyd0 debug" is usually a good start.
Thanks.
Actually, I didn't get anything I believe to be helpful.
So, my steps were:
# ifconfig zyd0 debug
# ifconfig zyd0 up
# ifconfig zyd0 scan
zyd0: flags=8847 mtu 1500
lladdr 00:18:6e:35:fd:7f
p
Christian Weisgerber wrote:
> == xterm ==
What doesn't work: UTF-8 mode is incompatible with 8-bit control
sequences. If that doesn't ring a bell for you, then you don't
need to worry about it. ;-)
I only noticed because the RMC on my AlphaServer 800 inserts 8-bit
controls to set bold and blin
| So now I know that that:
|
| 1. the association fails with status 25;
| 2. the drivers actively sends free-roaming requests during
| asssociation
| process while is requested to connect an exact network.
|
| Where can I read what is "association failed (status 25)" and
| "deauthenticate (reason
Contact me for information
On Jul 28 11:07:08, Marco Peereboom wrote:
> On Wed, Jul 28, 2010 at 05:45:14PM +0200, Jan Stary wrote:
> > > On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> > > > I have got a few pledges for hp laptops. I have gotten good (as in bad)
> > > > test reports of the following model
Jan Stary writes:
>> Actually a test with up to the second -current would be helpful to get a
>> baseline where we are at with this machine.
>
> What is the "second -current"?
"up to the second" -- as fresh as physically possible
- p
--
Peter N. M. Hansteen, member of the first RFC 1149 implem
On Wed, Jul 28, 2010 at 4:36 PM, Jan Stary wrote:
>> Actually a test with up to the second -current would be helpful to get a
>> baseline where we are at with this machine.
>
> What is the "second -current"?
-current that is current as of this second.
On Jul 28 23:06:48, Peter N. M. Hansteen wrote:
> Jan Stary writes:
>
> >> Actually a test with up to the second -current would be helpful to get a
> >> baseline where we are at with this machine.
> >
> > What is the "second -current"?
>
> "up to the second" -- as fresh as physically possible
a
damien.bergam...@free.fr wrote:
> Status 25 is IEEE80211_STATUS_SHORTSLOT_REQUIRED.
> It means that the access point refuses association from
> clients that do not support short slot time.
Thanks!
While it's not a valid workaround, I've set my router up to long slot, so my
issue is resolved.
Sti
| Thanks!
|
| While it's not a valid workaround, I've set my router up to long slot,
| so my issue is resolved.
|
| Still, could You please tell me where can I find that info without
| disturbing developpers and mailing list memebers?
In the IEEE 802.11 standard or in /usr/src/sys/net80211/ieee8
Quoting "Peter N. M. Hansteen" :
> Jan Stary writes:
>
> >> Actually a test with up to the second -current would be helpful to
> get a
> >> baseline where we are at with this machine.
> >
> > What is the "second -current"?
>
> "up to the second" -- as fresh as physically possible
That's what h
On Mon, 26 Jul 2010 12:52:35 -0500
Marco Peereboom wrote:
> I am 25% there with pledges. So if you are interested in getting
> these 2 bugs fixed send me an email with the pledge amount. I won't
> accept cash until we have enough to actually order machines.
150 USD sent. Thank you very much for
I got a reply on the FreeBSD lists suggesting the firewall itself
-had- to be the default gateway for the client;
Ahh. That explains it then. I was operating under the assumption that
the machine doing the synproxy would forge the reply such that the
TARGET host would reply to the synproxy
On 7/29/10, Justin wrote:
> I got a reply on the FreeBSD lists suggesting the firewall itself -had- to
> be the default gateway for the client;
>
> Ahh. That explains it then. I was operating under the assumption that the
> machine doing the synproxy would forge the reply such that the TARGET
FF 3.6.7 was crashing as reported by Dawe and me[1] same as X (from
snapshots and built from source). Rebuilding xenocara from source with
debug got X working (don't know why).
I tried building FF 3.6.8 and it too is crashing with signal 11. I
built FF 3.6.8 with DEBUG="-g -O0" hoping to at least
On Wed, Jul 28, 2010 at 2:43 AM, Fred Crowson wrote:
> On 28 July 2010 06:57, Nathan Sandver wrote:
>>
>> The swap partition I created at wd1b is correctly listed in /etc/fstab:
>> # cat /mnt/etc/fstab
>> /dev/wd1b none swap sw 0 0
>> /dev/wd0a / ffs rw 1 1
>> /dev/wd1a /usr ffs rw,nodev 1 2
>>
>
This removes any chance of scalability or the ability to separate
out single targeted IP addresses. I suppose the synproxy machine would
have to in some way act as NAT - translating between the two - or
alternately, act as a NAT to establish an initial session, then insert a
state to pass al
Confirmed - synproxy works great if the synproxy machine is the
default gateway for the end host. Sadly this means scalability (adding
multiple synproxy boxes) is not possible, nor is it possible to filter a
specific IP out of the end machines ranges.
Perhaps I'm shooting for the moon he
El Planeador Maestro de ProducciC3n Altamente Competitivo - TC)cnicas,
Habilidades y Herramientas de Excelencia
ConviC)rtase en un verdadero "Mariscal de Campo" organizando, integrando
y coordinando de manera inteligente los esfuerzos de las C!reas que
forman parte del negocio manufacturero (venta
On Thu, Jul 29, 2010 at 3:42 AM, patrick keshishian wrote:
> FF 3.6.7 was crashing as reported by Dawe and me[1] same as X (from
> snapshots and built from source). Rebuilding xenocara from source with
> debug got X working (don't know why).
>
> I tried building FF 3.6.8 and it too is crashing wit
On Wed, Jul 28, 2010 at 07:59:20PM -0700, Justin wrote:
>Confirmed - synproxy works great if the synproxy machine is the
> default gateway for the end host.
Yes, PF has to handle every packet of a synproxy'd connection.
> Sadly this means scalability (adding multiple synproxy boxes) is not
Coaching y Multihabilidades de Supervisisn
El Nuevo concepto de Coaching y Multihabilidades le ayudara a mejorar y
aumentar notablemente su capacidad de trabajo, le brindara las ticnicas
mas modernas y efectivas que usted necesita para destacar en su
organizacisn. Entre los temas a tratar, se incl
Hi OpenBSD Team,
My request goes for a tech paper with specifications for the CARP protocol,
just like a RFC. I Google 'd quite a long time with no luck. Wish you could
help with this.
Greetings,
Steven Moncayo.
48 matches
Mail list logo
