Dyslexia...I meant tmda below, sorry.
-mark
On Wed, 18 Jul 2001, Mark Jeftovic wrote:
>
> Does anybody know the disposition of tdma right now or the location
> of some tdma mailing list archives that are not at libertine.org?
>
> ObQmailQuestion:
>
> what sets EXT3? It appears as though it
If your using vpopmail change your password checking program to be vchkpw
not checkpassword
-Original Message-
From: Javier Morquecho Morquecho [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 07, 2000 12:17 PM
To: [EMAIL PROTECTED]
Subject: ERR authorization failed ...
Hi you all
Hi you all...
I'm using :
- RedHat
- Qmail
- QMailAdmin
- vpopmail
- vqsignup
- sqwebmail
All of them are working, except the last one, I every time receive the
error : ERR authorization failed, even if I try since my QMail server
[root@ jmorquec]# telnet localhost 110
T
ED]>
To: "Ihnen, David" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, October 13, 2000 6:25 PM
Subject: Re: qmail-pop3d error: '-ERR unable to scan $HOME/Maildir'
> oh, i see.
>
> the "Account" part of the error message refers to th
ot; <[EMAIL PROTECTED]>
Sent: Friday, October 13, 2000 6:02 PM
Subject: RE: qmail-pop3d error: '-ERR unable to scan $HOME/Maildir'
> Hm. Maybe Account refers to 'whatever the heck you have arbitrarily named
> this account today', in this case, 'cliff.carorder.co
any help in trouble shooting this would be appreciated.
thanks,
pearse
There was a problem logging onto your mail server. Your Password was
rejected. Account: 'cliff.carorder.com', Server: 'cliff.carorder.com',
Protocol: POP3, Server Response: '-ERR unable to scan
Actually sometimes I get that error and other times I get:
Unable to logon to the server using Secure Password Authentication. Account: 'abcd',
Server: 'xyz123.com', Protocol: POP3, Server Response: '-ERR authorization first',
Port: 110, Secure(SSL): No, S
m: James Phillips [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 16, 2000 2:44 PM
To: [EMAIL PROTECTED]
Subject: ERR Authorization failed w/qmail-pop
I have setup qmail+qmailadmin with all associated packages. I have set up a
few accounts via qmailadmin and am able to send messages with out a problem
.
I installed checkpassword but I always get -ERR authorization
failed even using a valid password.
I tried accessing the pop server via Outlook Express to verifiy that pop server is
running and it is because it gives me the error:
There was a problem logging onto your mail server. Your
ying 127.0.0.1...
Connected to mercury.redsea.co.cr (127.0.0.1).
Escape character is '^]'.
+OK <961.958499285@\>
user bob
+OK
pass xxx
-ERR authorization failed
Connection closed by foreign host.
Yet, using the checkpassword test as indicated in INSTALL for checkpassword:
root@mercury bob]# /var
OTECTED]]
> Sent: Monday, May 15, 2000 9:07 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Message: "-ERR this user has no $HOME/Maildir"
>
>
> On Mon, 15 May 2000, Bob Carpenter wrote:
>
> > But I DO have the maildir as created by "maildirmake", no?
&
On Mon, 15 May 2000, Bob Carpenter wrote:
> But I DO have the maildir as created by "maildirmake", no?
>
> [root@mercury bob]# ls -al Mai*
> -rw---1 bob bob 19136 May 12 13:07 Mailbox
> -rw---1 bob bob 8956 May 12 13:29 Maildir
> [root@mercury bob]#
No
ry (127.0.0.1).
Escape character is '^]'.
+OK <9981.958401059@FQDN>
user bob
+OK
pass xx
-ERR this user has no $HOME/Maildir
Connection closed by foreign host.
[root@mercury control]# more /var/qmail/control/defaultdelivery
./Maildir/
[root@mercury control]#
But I DO have the mail
On Wed, Feb 16, 2000 at 02:31:30PM +1300, kiwitp wrote:
> When I telnet port 110 I get +ok<942.950664165@INIT_VERSION=sysvinit and
> then -ERR authorization first. I enter user name and password but I just
> keep getting the -ERR message..
Are you using just qmail or are you also us
When I telnet port 110 I get +ok<942.950664165@INIT_VERSION=sysvinit and
then -ERR authorization first. I enter user name and password but I just
keep getting the -ERR message..
cheers
Jerry
- Original Message -
From: Sam <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
I think I am getting somewhere now. the only problem now seems to whit
passwords. When I try to connect to the mail server from a win9x box outlook
I get -ERR authorization failed even tow I enter the user name and password.
Could this be because windows is sending encrypted passwords? If so what
This is what I did to change to Maildir's # /var/qmail/bin/maildirmake
/home/user/Maildir Then I edited /etc/profile.d/qmail.sh and
/etc/profile.d/qmail.csh and changed Mailbox to Maildir/ but I am still
getting the -ERR usage: popup hostname subprogram.
Jerry
[EMAIL PROTECTED]
c
No problem about the confussion with the threads.
You should try the command:
mail -f /USER's home dir/Maildir/new/*
Of course u should change "USER's home dir" for the actual
directory.
It works fine in my server, hope itworks 4 u 2.
Have a nice day.
Byte.
Ing. José Rodrígue
j <[EMAIL PROTECTED]>
> Para: chupepe <[EMAIL PROTECTED]>
> Fecha: Lunes 14 de Febrero de 2000 10:30 PM
> Asunto: Re: -ERR
>
>
> I did install from rpm's but changed to Maildir's.
>
> - Original Message -
> From: chupepe
tgz
> attach.
>
> Please resapond with your email address if u r
> interested.
>
> Have a nice day.
>
> And good luck.
>
> Byte.
>
> Ing. José Rodríguez Alarcón
> -Mensaje original-
> De: jandj <[EMAIL PROTECTED]>
> Para: chupepe
ess if u r
interested.
Have a nice day.
And good luck.
Byte.
Ing. José Rodríguez Alarcón
-Mensaje original-De:
jandj <[EMAIL PROTECTED]>Para:
chupepe <[EMAIL PROTECTED]>Fecha:
Lunes 14 de Febrero de 2000 10:30 PMAsunto: Re:
-ERR
I did install fro
Had the same problem last week.
I've solved it, but to help u i need to know if u r going to
use POP3 with Maildir's or with mbox (dafault if u installed Qmail from
rpm's)
I have just installed qmail under linux red hat 6.0. Everything seems to
working
ok but pop3. when i try to connect to the pop server i get ERR usage: popup
hostname subprogram. I am running checkpassword..Here is the line in my
inetd.conf.(pop3streamtcp nowait root
/var/qmail/bin
On Sat, Feb 12, 2000 at 05:16:56PM -, Derrick Hopkins wrote:
> Hi, I'm having a problem with password authentication using qmail-pop3d and
> checkpassword.
>
> and here is a snippet from my inet.conf
> -
> tcpserver -v -c 400 -u 102 -g 504 0 smtp /var/qmail/bin/qmail-smtpd
> &1|/var/q
try $HOSTNAME instead of $HOST
the command SET gives you a list of the environment
-- jmr
- Original Message -
From: "Tetsu Ushijima" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 22, 2000 6:15 PM
Subject: Re: Help,-ERR this user has no $HOM
michael writes:
> +OK <2123.948385520@/bin/checkpassword>
Note that qmail-popup presents ``/bin/checkpassword'' as the
domain part of the timestamp in this banner.
> qmail-popup $HOST $CHKPASS $COMMAND Maildir \
So it's likely that $HOST is not set.
--
Tetsu Ushijima
wx-- 2 stingusers1024 Jan 21 00:21 tmp
What does the top level of the maildir look like? And all of the
directories from / to ~sting?
>-ERR this user has no $HOME/Maildir
Misleading error message. Should say "unreadable $HOME/Maildir"--and I
think the "$HOME
21 00:21 tmp
Telnet result:
Connected to localhost.Escape character is
'^]'.+OK <2123.948385520@/bin/checkpassword>user sting+OK
pass -ERR this user has no $HOME/MaildirConnection closed by
foreign host.
I use tcpserver, in qmail-pop3.init:
if [ -e $CDB ];
then
Ok, I got my SMTP problems fixed thanks to this list. Thanks again greatly.
Now I've still got a problem with POP3 logins. This is what is happening:
+OK <[EMAIL PROTECTED]>
user user%host.domain.com
+OK
pass mypassword
-ERR aack, child crashed
Connection closed by foreign h
ocalhost pop3
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
+OK <[EMAIL PROTECTED]>
user hwany21
+OK
pass **
-ERR aack, child crashed
Connection closed by foreign host.
-ERR aack, child crashed
What is this error message?
When do it occur?
Ho
Infinite Knowledge wrote:
>
> Running qmail-pop3d with LDAP patchs and have just gotten
> things working, sort of.
>
> Authorization and denials are working , however, after authorizing
> and delivering, getting an error, thusly:
> Connected to localhost.
> Escape character is '^]'.
> +OK <[EMAI
Running qmail-pop3d with LDAP patchs and have just gotten
things working, sort of.
Authorization and denials are working , however, after authorizing
and delivering, getting an error, thusly:
Connected to localhost.
Escape character is '^]'.
+OK <[EMAIL PROTECTED]>
user barfo
+OK
pass whatever
+O
Also, I believe that checkpoppasswd requires that the password in the
popusers file be encrypted.
Dennis Duval
>
> I installed qmail with the Jedi's checkpoppasswd.
>
t this way if checkpasswd is being invoked ok.
I tried the telnet methods below on my system:
>
> telnet localhost 110
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> +OK <1500 [EMAIL PROTECTED]>
> user toto
> +OK
> pass
I try again ... If someone have any tips, let me know. I have more and
more users frustrated each second...
Subject: checkpoppasswd - ERR authorization failed
Hi,
I installed qmail with the Jedi's checkpoppasswd.
I am running the pop server by the command:
/usr/local/bin/tcpserver
RedHAt with shadow passwd.
I refreshed the database with qmail-newu. There is no special messages in
the logfile(auth).
Here we go:
telnet localhost 110
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
+OK <1500 [EMAIL PROTECTED]>
user toto
+OK
pass titi
-ERR auth
On Sat, May 15, 1999 at 11:10:38AM -0600, New Hope Hostmaster wrote:
> I've finally got the checkpasswd authorization to work, but not it's not
> finding the $Home/Maildir.
>
> I have put a Maildir in all the placing I think it may look, using the
> qmail-makedir whatever command, but still no lu
ay, May 15, 1999 10:11 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Qmail -ERR this users has no $HOME/Maildir
I've finally got the checkpasswd authorization to work, but not it's not
finding the $Home/Maildir.
I have put a Maildir in all the placing I think it may look, usi
I've finally got the checkpasswd authorization to work, but not it's not
finding the $Home/Maildir.
I have put a Maildir in all the placing I think it may look, using the
qmail-makedir whatever command, but still no luck.
So, how do I change/find out the value of $HOME, so I can change it, or ma
Re: my Perl code...
I found the problem -- funny what errors you see when you step away from
the problem for a 1/2 hour!!!
Thanks again, and if anyone's interested in what I did, just let me know.
Roger "Merch" Merchberger
--
Roger "Merch" Merchberger --- sysadmin, Iceberg Computers
Recyclin
Sorry, I sent that last one using the wrong addy
Hi,I'm trying to get the qmail pop3d working, and the
error message I keepgetting when I am checking mail is -ERR user has no
$HOME/Maildir/home/whoever/Mailbox exists, and I specify
/bin/checkpassword/var/qmail/bin/qmail-pop3d Mail
ys.ca
Fingerprint: 1683 001F A573 B6DF A074 0C96 DBE0 A070 28BE EEA5
-Original Message-
From: Chris Johnson <[EMAIL PROTECTED]>
To: Jay <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, April 19, 1999 12:55 PM
Subject: Re: REPLY TO THIS ADDRESS
On Mon, Apr 19, 1999 at 12:43:23PM -0400, Jay wrote:
> Sorry, I sent that last one using the wrong addy
>
> Hi,
> I'm trying to get the qmail pop3d working, and the error message I keep
> getting when I am checking mail is -ERR user has no $HOME/Maildir
> /home/whoeve
Hi,
I'm trying to get the qmail pop3d working, and the error message I keep
getting when I am checking mail is -ERR user has no $HOME/Maildir
/home/whoever/Mailbox exists, and I specify /bin/checkpassword
/var/qmail/bin/qmail-pop3d Mailbox
in inetd.conf
any ideas?
OK, thanks for your help so far, but I am still getting the
error
/home/whoever/Maildir
exists now, and it has mail in it but outlook express responds
first with rejecting the password, but gives me that same error again.
ERR User has no $HOME/maildir
any other ideas?
A573
B6DF A074 0C96 DBE0 A070 28BE EEA5
-Original Message-From:
Jay <[EMAIL PROTECTED]>To:
[EMAIL PROTECTED] <[EMAIL PROTECTED]>Date:
Monday, April 19, 1999 2:05 PMSubject: ERR User has no
$HOME/maildir (STILL GETTING ERROR)
OK, thanks for your help
- Original Message -
From: Chris Johnson <[EMAIL PROTECTED]>
To: Jay <[EMAIL PROTECTED]>
Sent: Monday, April 19, 1999 2:16 PM
Subject: Re: ERR User has no $HOME/maildir (STILL GETTING ERROR)
> On Mon, Apr 19, 1999 at 02:01:13PM -0400, Jay wrote:
> > OK, thanks for
That's a little incorrect, if checkpassword wasn't working it would give
'-ERR authentication failed' when connecting to the POP3 service.
This has to do with qmail-local.
Reid Sutherland
Network Administrator
ISYS Technology Inc.
http://www.isys.ca
Fingerprint: 1683 001F
ord, but gives me that same error again.
>
>ERR User has no $HOME/maildir
>
>any other ideas?
Perhaps your checkpassword is not working properly. Have a look on
www.qmail.org under the "Alternative Checkpassword Implementations" section
for Mark Delany'
To: [EMAIL PROTECTED]
> Delivered-To: [EMAIL PROTECTED]
> Delivered-To: mailing list [EMAIL PROTECTED]
> Subject: Problem with qmail-pop3d - ERR unable to scan $HOME/Maildir
>
> Hi
>
> I'm having a problem with qmail-pop3d.
>
> There is no problem starting qmail-pop3d via
ch is "./" so I don't really
know how qmail-pop3d would know where it is.
Is it a bug - or what am I doing wrong?
Example:
Connected to localhost.
Escape character is '^]'.
+OK <[EMAIL PROTECTED]>
user martin
+OK
pass
-ERR unable to scan $HOME/Maildir
My /var
51 matches
Mail list logo