Hi,I am using tossim/tinyviz to simulate a small network of
nodes running my application. I want to extract some statistics about
transmitted packets in the network. The Tython manual gives a simple
example for doing this. It suggests that doing a "print packets[3]" on
Tython console will print out
In the first error make is complaining about the missing Makerules file under /opt/tinyos-1.x/apps directory. Not sure about the second error because you haven't given the complete error message.
On 9/19/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
I upgraded TinyOS1.1.10 to TinyOS1.1.15 but wh
Hi Manu,
> In Blackbook5, what does BDictionary.getDataLength return?
> .. what should minimumSize include?
First, are you referring to the BFileDir.getDataLength(char *filename)
command, being run on a Dictionary file?
Dictionary files have special properties to them that allow them to be
up
Thanks, I just figure out. The reason is Matlab 6.1 has a dot.exe too. To
solve it, I move Graphviz/bin to front of Matlab/bin.
-Original Message-
From: Michael Schippling [mailto:[EMAIL PROTECTED]
Sent: Monday, September 18, 2006 4:34 PM
To: Adam
Cc: 'tinyos-help'
Subject: Re: [Tinyos-h
What program is generating those warnings?
But in any case you want to make sure that you have Graphviz
installed and accessable in your PATH. (it contains the "dot"
net-graphics plotter).
MS
Adam wrote:
The generated document does not contain pictures. How to solve this?
Ah, yes - 1.3V is a definit problem. You need to be able to source 2.7
volts minimum, with 75+ mA. I recommend going above 2.7 volts to about
3.3-3.6 volts just to allow for some voltage sag. The crash happens so fast
(1 ms) that you can't even detect what's going on.
-Original Message--
The generated document does not contain pictures. How to solve this?
warning, language gif not recognized, use one of:
dot canon plain plain-ext
warning, language cmap not recognized, use one of:
dot canon plain plain-ext
warning, language gif not recognized, use one of:
do
On Monday 18 September 2006 01:11 pm, Gurkan Cepni wrote:
> Actually, I am not planning to sample the signals continously. That's ok
> for me to sample for just 2 secs. (using 30ksps sampling rate: I want to
> sample it fast so that the environment will not change much)
I wrote a test program on
It looks like the length field that the pc expects has been set
to 0xff, which might be overlayed from some other data field.
If you can use ListenRaw to get the actual message bytes you
may be able to hand disassemble them and figure it out.
I have a tiny tickle of a memory that this is a versio
So in-network programming will be available in the next release which is due out in November? Will it be Deluge or some other program?IanOn 9/18/06,
Philip Levis <[EMAIL PROTECTED]> wrote:
On Sep 18, 2006, at 10:54 AM, Ian Welch wrote:> I'm trying to program my motes through the network using TOS2
On Sep 18, 2006, at 10:54 AM, Ian Welch wrote:
I'm trying to program my motes through the network using TOS2.0.
I've read the document "Mote In-Network Programming User Reference"
but I'm still a bit unsure on where to start. I know I need to wire
a module into my program. What is this modu
Hi Cepni,
at 30 ksps you should probably use DMA to interface to hte sensor.
For example of how to do this look at the drivers for Microphone*.nc
in /opt/moteiv/tos/sensorboards/invent/ (I assume you use Boomerang).
If you would like to look at an example of buffering a larger chunk
of data and
Thanks for your reply Matt.
Actually, I am not planning to sample the signals continously. That's ok for me to sample for just 2 secs. (using 30ksps sampling rate: I want to sample it fast so that the environment will not change much). Then store 2 secs of data on memory on telos-b, and send the
I already upgraded graphviz to version 2.8, but it still report this error.
How to deal with it? Thanks.
==
nesc1: warning: DOC WARNING: your version of `dot' does not support
client-side
image maps. Upgrade to graphviz >= 1.8.8 to enable
Hi all,
I am trying to send queries to a network of Mica2 motes, with TinyDB
installed on them, from Matlab. I believe that I have imported all of the
appropriate java objects (or packages) in my mfile, but I am unsure of how
to parse a query to be sent to the network.
For instance, say I wa
Cepni, It will not be possible for you to sample at >30kHz across two channels and transmit the data in real-time. You will have to sample sensors to some form of flash memory. The motes have a 1mB flash chip, but this will fill up very fast with the sampling rate you are needing. The 1mB flash
Hello everyone,
I am trying to use Moteiv- tmote telos-b unit to sample two signals using the external pins available on the unit. I want to sample each one with a sampling rate of >30 ks/s and send them to another telos-b unit connected to a laptop and save the signal waveforms on the computer. An
I'm trying to program my motes through the network using TOS2.0. I've read the document "Mote In-Network Programming User Reference" but I'm still a bit unsure on where to start. I know I need to wire a module into my program. What is this module and where do i find it? I also can't find the XNP ja
It is easy to use the watchdog timer in the MSP430, and using it is fairly application specific, which are primary reasons there is no component for it. Here are some tips:1) Read Chapter 10 "Watchdog Timer" in the MSP430 x1xx User's Guide from TI
2) MSPGCC defines some helper macros in common.h (
I upgraded TinyOS1.1.10 to TinyOS1.1.15 but when I try to compile an
application in " tinyos1.x/apps" I got the following error:
"
[EMAIL PROTECTED] /cygdrive/c/tinyos/cygwin/opt/tinyos-1.x/apps/TOSBase
$ make mica2
../Makerules:26: /../apps/Makerules: No such file or directory
make: *** No rule to
I upgraded TinyOS1.1.10 to TinyOS1.1.15 but when I try to compile an
application in " tinyos1.x/apps" I got the following error:
"
[EMAIL PROTECTED] /cygdrive/c/tinyos/cygwin/opt/tinyos-1.x/apps/TOSBase
$ make mica2
../Makerules:26: /../apps/Makerules: No such file or directory
make: *** No rule to
On Sep 18, 2006, at 7:09 AM, KANG HUI wrote:
The Tmote datasheet gives how lqi is calculated.
Well, not really. Here's a more detailed explanation Oyvind Janbu,
who was the program manager for the CC420 chip, gave me:
-
First of all, regarding the correlation value provided in the RXF
I'm using not so much RAM, at compile time is around 1700 bytes (it depends on
the different versions of my program).
But now, after other tests, i see that when the motes enter in the
reading-from-flash phase, something happens and some of them break down. They
are not more able to work.And onl
>From what I understand, I don't think so, because if the system enters an infinite loop or somtehing it will prevent both timers from firing and nobody will reset the device.KANG HUI <[EMAIL PROTECTED]> escribió: Hi,is that possible you can use two or more timer so that one timer can beused as the
Spam detection software, running on the system "mail.Millennium.Berkeley.EDU",
has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
the administrator
Hi,
is that possible you can use two or more timer so that one timer can be
used as the watchdog?
On Mon, 18 Sep 2006, [iso-8859-1] Pablo Gil Monta?o wrote:
> Hello.
>
> I want to use a watchdog timer in tmotes nodes to reset the motes if
> something goes wrong. I have been browsing through WDTC
The Tmote datasheet gives how lqi is calculated.
On Mon, 18 Sep 2006, Giovanni Petracca wrote:
> Hi all,
>i'm using Tmote sky modules and running Trawler application... I
> would like to know how is measured LQI parameter (db? watts?) and how i
> can calculate it. I see that if I move fur
Hi all, i would like to know, on tmote sky modules, what is the frequency of packet transmission using Delta application. (i.e. how many packets per second). thanks a lotG.
Petracca
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
h
Hello.I want to use a watchdog timer in tmotes nodes to reset the motes if something goes wrong. I have been browsing through WDTC and WatchdogC, but they seem to be written for other platforms. Is there any implementation for tmote?Thanks in advance.
LLama Gratis a cualquier PC del Mundo.Llamad
Hello Everyone,
I went through the cc1000RadioM module.
In that module I could find statements like
call SpiByteFifo.enableIntr();
call SpiByteFifo.disableIntr();
Why are these interrupts disabled? In what situations we
have to disable the interrupts?
Please help me
hi everyone
I want to simulate Smac
(a kind of mac protocal) in tossim, but the souce code is designed
for mica board. It seems i have to change the bottom
interfaces if i want to
simulate it in tossim. But i there are so many interfaces that has
been used, i don't know how to deal wi
Hi all, i'm using Tmote sky modules and running Trawler application... I would like to know how is measured LQI parameter (db? watts?) and how i can calculate it. I see that if I move further the modules the indicator on the edges rises, and vice versa when i move near them. Thanks a lotG.
P
Hello every one,
I want to do Byte level radio transmission and reception.
My receiver application receives some junk data and I could not check
whether my transmitter is sending the data correctly.
Please help me if any one has done this before.
Hari Hara Sudhan
__
Perhaps what you want is TOSBase (it's an application included with TinyOS). You install it on a mote and this mote will act as a bridge between the radio and the serial port (will send to the serial port everything that hears from the radio and will send to the radio any packet received by the ser
Actually, this error is generated when a function is called BEFORE its defined/declared (remember that nesC is C-based not C++).Just put the function declaration/definition at the start in the implementation body in nesC file or just above the function in which you are going to call it.On 9/18/06,
You are including CC2420 specific stuff in your application and then compiling for target pc! This is causing the error messages.On 9/18/06, Sumit Gupta
<[EMAIL PROTECTED]> wrote:
I would also like to tell that this is happening only in SurgeTelos activity. I dont know why? Please advice.
SumitOn
I would also like to tell that this is happening only in SurgeTelos activity. I dont know why? Please advice.
SumitOn 9/18/06, Sumit Gupta <[EMAIL PROTECTED]> wrote:
Hi all,
All of sudden my applications are not compiling. They are giving some
errors which I never seen before. I dont have any cl
37 matches
Mail list logo