Hi!
On Fri, 16 May 2008, [EMAIL PROTECTED] wrote:
> Is there any way to make it work on a platform different from telosb?
> (specifically, on a mica2 mote network)
Deluge 2 was working on mica2. I don't know if Deluge T2 from tinyos-2.x
works on mica2 but it works fine on micaz. :-)
--
Razvan
Have you tried to execute msp430-gcc directly? For example, doing
"msp430-gcc --version" displays the following message on my setup
msp430-gcc (GCC) 3.2.3
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even
Hi, I am still stuck with the message, and I provide below the path and all
comments for mspgcc
Error message:
Couldn't execute msp430-gcc
make: *** [exe0] Error 2
Now I check for correct installation,with following results
1.echo $PATH
/opt/msp430/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:
Hi all,
I request someone to help in solving my below stated issue.
> How to avoid sockets in Tossim:
I have learnt that some hookup to event loop is needed for that, but never
understood, as no further detail was provided.
Any details with pointer to relevant code porti
Hi all,
I request someone to help in solving my below stated issue.
> How to avoid sockets in Tossim:
I have learnt that some hookup to event loop is needed for that, but never
understood, as no further detail was provided.
Any details with pointer to relevant code porti
Thanks for the help ...
However I was still not able to figure out to which component I should
wire the file voltageC.nc
Also, how will I be able to take out readings specifically from ADC1,
ADC2 and ADC3.
I saw the files and the defined constants in Atm128Adc.h...but where
do I include the file a
Hi!
On Fri, 16 May 2008, jiwen zhang wrote:
> Hello Razvan ME :
>
> 2008/5/16 Razvan Musaloiu-E. <[EMAIL PROTECTED]>:
>
>> Hi!
>>
>> Sorry for responding so late. I had a rather busy day. :|
>>
>> On Thu, 15 May 2008, jiwen zhang wrote:
>>
>> hello Razvan ME :
>>> that is to say the version of
Phil is right, I mean slow variation in time (ten of millisecond) of the RSS
between two nodes. Is it feasible to implement something like this?
What about simulate network formation? Is it also something feasible?
Thanks a lot guys,
.:Fred
-Original Message-
From: [EMAIL PROTECTED] [mai
Hi!
On Fri, 16 May 2008, jiwen zhang wrote:
> Hello Razvan ME :
>
> 2008/5/16 Razvan Musaloiu-E. <[EMAIL PROTECTED]>:
>
>> Hi!
>>
>> Sorry for responding so late. I had a rather busy day. :|
>>
>> On Thu, 15 May 2008, jiwen zhang wrote:
>>
>> hello Razvan ME :
>>> that is to say the version of
On May 16, 2008, at 10:55 AM, Paul Stickney wrote:
> I do not understand what you mean by slow-fading.
>
> But...
> The UCS tool can be used to create test networks. It lets you specify
> many variables in a configuration file which is then generated into a
> gain/noise data which can be fed into
I do not understand what you mean by slow-fading.
But...
The UCS tool can be used to create test networks. It lets you specify
many variables in a configuration file which is then generated into a
gain/noise data which can be fed into the TOSSIM T2 radio model (this
may cover what you want). Howe
My money is that
1) /opt/msp430/bin is not in $PATH
verify: echo $PATH
2) you do not have the execute permission
verify: ls -l `which msp430-gcc`
3) (this is cygwin and a VC dll) dependency is missing
verify: strace `which msp430-gcc`
(If you are on cygwin, make sure to check #3).
__
Sarfraz,
There is no timer configured for 32khz on the iris platform. You have
the following options:
1. Use CounterMicro32C/AlarmMicro32C if it fits your application's
needs.
2. Reconfigure Timer 3 to 32kHz, and create an alarm on top of it.
Note that all of these timer
Not sure if the error is ever FAIL. It's generated from the underlying
platform's SPI driver, not the CC2420 chip. The error code is always
SUCCESS in writeDone() from my experience.
-David
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paolo
Sent: Friday, Ma
Is there any way to make it work on a platform different from telosb?
(specifically, on a mica2 mote network)
Thanks,
Fernando.
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinf
Explaining better...
the error_t == FAIL When can occur (What could have happened in FIFO)
?
Paolo wrote:
Hello
A question about TXFIFO.writedone provided by CC2420TransmitP.
async event void TXFIFO.writeDone( uint8_t* tx_buf, uint8_t
tx_len,
error_t error )
What values can t
I've never experienced an error in the writeDone() event. The error codes
are documented in tos/types/TinyError.h. An error_t is typedef'd to a
uint8_t.
-David
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paolo
Sent: Friday, May 16, 2008 8:41 AM
To: tiny
Do you have administrative privileges when you try to install MoteView?
Otherwise, Postgres installation will fail since it won't have
permissions create "postgres" user account. Here's some useful feedback
from one of our users and how they were able to overcome this.
**
The problem
TUB has never officially maintained that code. AR were the last responsible
party as far as I can remember. Those last edits from us are probably
related to the union based configuration implementation.
Vlado
On Fri, May 16, 2008 at 5:30 PM, Philip Levis <[EMAIL PROTECTED]> wrote:
>
> On May 16,
Mihir,
I suspect that you don’t have the correct toolchain. Make sure that the version
of avr-as on the path is from the avr-binutils package that comes with the
tinyos toolchain, and not from the one that comes with RH9.
Janos
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Beha
Reema,
Try to use tos-deluge directly. Apparently, the helper scripts under
/apps/test/deluge haven’t been updated yet. The baud rate of the iris is the
same as that of the micaz (57600bps).
Janos
From: Reema Mathew - Michael [mailto:[EMAIL PROTECTED]
Sent: Friday, May 16, 2008 5:48
Hello
A question about TXFIFO.writedone provided by CC2420TransmitP.
async event void TXFIFO.writeDone( uint8_t* tx_buf, uint8_t tx_len,
error_t error )
What values can take the error_t variable ?
Thanks
___
Tinyos-help mailing list
Tinyos-help@
Marco,
There is an FTSP implementation in
tinyos-2.x-contrib/stanford-lgl/libs/FTSP, however, the mica2/CC1000
stack does not support packet-level time synchronization functionality
at the moment. It should work with the iris/rf230 stack and the cc2420
stack, though.
Janos
-Original Message
On May 16, 2008, at 2:31 AM, Christopher Schwardt wrote:
>
>
> I tried to find out what happens, when I call start() on the
> SplitControl (which is the only thing that gets called in our
> SerialInit.init()). The SplitControl turns out to be wired to a
> StdControl in our SerialProtoP. This again
Hi All,
I'm following the TOSSIM documentation and I wonder to simulate the
uart communication.
But, when I compile the BaseStation I receive:
$make micaz sim
.
.
BaseStationC.nc: 79: ambiguous match
Open the BaseStationC.nc, we have the line:
BaseStationP.UartReceive -> Serial;
What is
Hi Alexandre,
I'm really no specialist in this area, I just try to help by guessing
potential problems and, in the absence of comments from other people on
the mailing list, making some suggestions. But now I'm almost out of
such ideas :-)
I'm not sure I correctly understand the meaning of thi
Thanks a lot for your answer. Well, i was implying this because it was
our only explanation for the situation. We just cannot figure out why
the reader talks with the pc, the telosb mote talks with the pc, but
they just won't talk with each other. :(
At least we can now stop anatomizing the serial
Hi Urs,
Yes my platform is running a MSP430f1612 and we plan on migrating to the
msp430f2618 in a few weeks.
I look at the file in the repository and compared with the one I have but
despite a different -DDEFINED_TOS_AM_GROUP assignment and new usage of
NCC_SAFE_TINYOS_FLAG no changes where made
There is no difference at all for your application. For most of us,
the difference
between DTE and DCE is the cable you use to connect them. Once you set
up a uart, it will receive or send as required.
I haven't looked into setting up the serial on the motes at all, sorry
I can't help
you with
Hello,
I know there were several threads, but I didn't find what i need.
I'm looking for a time synchronization protocol ready (or almost ready)
to use with mica2 motes on tinyos2.x.
Thank you!
Regards, Marco
--
. Marco Langerwisch, B.Sc.
. ICQ 48125065
. www.web96.de
___
Thanks Paul,
Do you know if it is possible to simulate network formation with tossim i.e.
association to best neighbor, etc???
Tossim does not seems to simulate slow fading, is there any fundamental reason
that can prevent its implementation within the simulator???
.:Fred
-Original Message
> When I compile and install apps which use LEDs, the LEDs no longer
> blink. I tested with the "RadioCountToLeds" app with 2 motes. 1 mote
> had an old, good version (so it's LEDs blinked the whole time), the
> other motes I re-installed the test app on after rebuilding different
> versions of Tin
Hi list.
I'm using the latest CVS version, and LEDs no longer work on Tmote Sky.
(more precisely, I'm mirroring Razvan's git tinyos2.x repo, which
mirrors TinyOS 2.x CVS).
The latest commit I have is this one:
commit 290b85319b5ea5e24d0b22f0c1bcf961c55ed49c
Author: klueska
Date: Thu May 15
hi,
i'm having a problem installing PostgreSQL 8.0.0-rc1 on XP. I'm using the
insallation disk that came with the X-Bow developer kit i'm using.
Everything goes fine(installing moteview etc.) untill the installation of of
PastgreSQL. The files seem to get copied and then i get the following
message
I am able to make iris
when i run ./burn /dev/ttyUSB0 iris
the following error is displayed "Wrong baudrate" at Uploading image section
Reema--- On Fri, 16/5/08, Janos Sallai <[EMAIL PROTECTED]> wrote:
From: Janos Sallai <[EMAIL PROTECTED]>Subject: RE: [Tinyos-help] tests/deluge/BlinkTo: [EMAIL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Dammit, I just, almost accidentaly, found where the ResourceConfigure
gets overloaded in one of my 30 open vims.
Several classes above in the PlatformSerialC we wire Msp430UartConfigure
from our TelosSerialP (which contains our msp430_uart_union_con
Janos,
thanks a lot :)it's working :)
Jordan
---
Jordan,
>
> This has come up on the list before. Please replace die with warn at row
> 81 of /usr/bin/tos-set-symbols. You
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi,
well, I repost my question with some further information.
I tried to find out what happens, when I call start() on the
SplitControl (which is the only thing that gets called in our
SerialInit.init()). The SplitControl turns out to be wired to a
Hello Razvan ME :
2008/5/16 Razvan Musaloiu-E. <[EMAIL PROTECTED]>:
> Hi!
>
> Sorry for responding so late. I had a rather busy day. :|
>
> On Thu, 15 May 2008, jiwen zhang wrote:
>
> hello Razvan ME :
>> that is to say the version of
>> http://hinrg.cs.jhu.edu/git/deluge/tinyos-2.x.git is same
Thank you for your help. The problem has been solved as your tip.
> Get rid of the space between mib520, and com6
>
> kevin
>
> On Fri, May 16, 2008 at 12:04 AM, SHEN Zhong <[EMAIL PROTECTED]> wrote:
>> Hi all,
>>
>> I have a problem about downloading the program to micaz. After i
>> compile
>> t
Hi Leo,
Try "make micaz install mib510,com6". If this doesn't work, search the
mailing list for the previous messages on this topic (for instance the
ones from end of March).
Cheers,
Urs
SHEN Zhong wrote:
> Hi all,
>
> I have a problem about downloading the program to micaz. After i compile
-- Forwarded message --
From: jiwen zhang <[EMAIL PROTECTED]>
Date: 2008/5/15
Subject: Re: problems about Deluge
To: "Razvan Musaloiu-E." <[EMAIL PROTECTED]>
Cc: tinyos-help , Chieh-Jan Mike Liang
<[EMAIL PROTECTED]>
Hello Razvan ME :
thank you for your reply !!
it is r
Get rid of the space between mib520, and com6
kevin
On Fri, May 16, 2008 at 12:04 AM, SHEN Zhong <[EMAIL PROTECTED]> wrote:
> Hi all,
>
> I have a problem about downloading the program to micaz. After i compile
> the code, type "make micaz install mib520, com6", the system gave me a
> error "/
Hi, I'm a student of SVNIT,Surat
>
> I have tiny os 1.1.0
> installed on Red Hat 9, with all the correct versions of tools
> installed. toscheck runs perfect without any errors or warnings. I am
> trying to compile Blink application supplied with it. "make pc" runs
> without any problems.. it creat
On Wed, May 14, 2008 at 3:43 PM, <[EMAIL PROTECTED]> wrote:
> I tried compiling /apps/tests/TestNetwork, and the same warnings were given.
> (in lines 488, 570, and 592 of CTPForwardingEngineP, the comparison
> "(qe->client < CLIENT_COUNT) " is always false due to limited range of data
> type) A
Hi all,
I have a problem about downloading the program to micaz. After i compile
the code, type "make micaz install mib520, com6", the system gave me a
error "/opt/MoteWorks/make/avr/mib520.extra:5: *** MIB520 must be defined,
try "make micaz help". Stop.". I didn't modify any value and the proce
Hi Don,
Use the PacketRSSI interface of the ActiveMessageC to access the RSSI
value. Please note, that this value is NOT always valid, so you shold
use the isSet() command before you can trust the value returned by
get(). (An RSSI measurement is valid if we manage to service the radio
and query th
I get the error message every time I try to execute(paul's suggestion did not
work)
make tmote
The error message is
Couldn't execute msp430-gcc
make: *** [exe0] Error 2
when I write
which msp430-gcc it gives me
/opt/msp430/bin/msp430-gcc
I am not being able to figure out what is going wrong
48 matches
Mail list logo