Re: [Alsa-user] no sound with e-mu 1820
On Wed, 2006-08-23 at 00:57 +0200, Pille wrote: what do i have to do now? This device is not yet supported by ALSA. You can wait for it to be supported. The upcoming ALSA 1.0.12 release will have improved support, but I still don't think it will work yet. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] No sound on new notebook
On Tue, 2006-08-22 at 18:48 -0400, Chris O'Regan wrote: Can anyone help? I'm out of ideas. What codec does your sound card use? Check /proc/asound/card0/codec-something (I don't remember the filename) Lee Chris On Mon, 2006-08-21 at 12:12 -0400, Chris O'Regan wrote: I'm trying to get the sound to work on my new Gateway MX3410 notebook. I've installed Gentoo and followed the instructions on their site for setting up ALSA. Alsaconf detects my card and the drivers load, but there is no sound. Of course, I checked the setting with alsamixer and unmuted the master playback volume control. I tried playing an MP3 with madplay as both myself and root. No errors from madplay, but no music either. KDE no longer complains about the sound system at startup, but no sound there either. I've tried the drivers that came with kernel (2.6.17-gentoo-r4; 1.0.11rc4) as well as the latest stable drivers (1.0.11). I don't seem to have many mixer controls: Output: Master (unmuted, 100%); PCM (100%); Capture Mux (0%) Input: Capture (off, 0%); Capture Mux (on, 0%) Switches: IEC958 (off); Input Source (Front Mic) I've played with these setting to no avail. Also, my notebook has an output for headphones, but there is no control for this; is that normal? There's no sound from the headphones either. Some information is listed below. Thanks, Chris # lspci -s 00:10.1 -vv 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) Subsystem: Gateway 2000 Unknown device 0317 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 217 Region 0: Memory at b000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: Data: Capabilities: [6c] HyperTransport: MSI Mapping # cat /proc/asound/cards 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xb000 irq 217 # lsmod Module Size Used by snd_pcm_oss40352 0 snd_mixer_oss 17920 1 snd_pcm_oss snd_seq_oss33024 0 snd_seq_midi_event 7936 1 snd_seq_oss snd_seq5 4 snd_seq_oss,snd_seq_midi_event snd_seq_device 8972 2 snd_seq_oss,snd_seq pcspkr 3968 0 forcedeth 28300 0 snd_hda_intel 19476 1 snd_hda_codec 131888 1 snd_hda_intel snd_pcm81028 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 23556 2 snd_seq,snd_pcm snd51940 11 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer snd_page_alloc 10760 2 snd_hda_intel,snd_pcm [...] # cat /etc/modules.d/alsa # Alsa 0.9.X kernel modules' configuration file. # $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.5 2006/06/13 10:18:25 uberlord Exp $ # ALSA portion # OSS/Free portion ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run `modules-update' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion ## alias snd-card-0 snd-interwave ## alias snd-card-1 snd-ens1371 ## OSS/Free portion ## alias sound-slot-0 snd-card-0 ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss # Set this to the correct number of cards. # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF version 1.0.11 --- alias snd-card-0 snd-hda-intel alias sound-slot-0 snd-hda-intel # --- END: Generated by ALSACONF, do not edit. --- # equery list alsa [ Searching for package 'alsa' in all categories among: ] * installed packages [I--] [ ] media-libs/alsa-lib-1.0.11 (0) [I--] [ ] media-plugins/gst-plugins-alsa-0.10.4 (0.10) [I--] [ ] media-sound/alsa-driver-1.0.11 (0) [I--] [ ] media-sound/alsa-headers-1.0.11 (0) [I--] [ ] media-sound/alsa-utils-1.0.11 (0.9) - Using Tomcat but need to do
Re: [Alsa-user] No sound on new notebook
On Tue, 2006-08-22 at 19:30 -0400, Chris O'Regan wrote: What codec does your sound card use? Check /proc/asound/card0/codec-something (I don't remember the filename) Do you mean this: $ cat /proc/asound/card0/codec#0 Codec: SigmaTel STAC9200 Yes. Try loading snd-hda-intel with the model=ref option. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] no sound with e-mu 1820
On Wed, 2006-08-23 at 01:29 +0200, Pille wrote: hmm... but i found this on the project site: http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Creative+Labscard=E-MU+1820m.chip=CA0102%2C+FPGAmodule=emu10k1 what does that mean? http://www.alsa-project.org/alsa-doc/index.php?vendor=vendor-Creative_Labs#matrix For E-MU 1212m and E-MU 1820m it says support arriving soon. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] No sound on new notebook
On Tue, 2006-08-22 at 20:09 -0400, Chris O'Regan wrote: Try loading snd-hda-intel with the model=ref option. No change. Here are some logs (I've enabled debugging): Aug 22 20:01:05 eames ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 Aug 22 20:01:05 eames ACPI: PCI Interrupt :00:10.1[B] - Link [LAZA] - GSI 20 (level, high) - IRQ 217 Aug 22 20:01:05 eames PCI: Setting latency timer of device :00:10.1 to 64 Aug 22 20:01:05 eames ALSA /var/tmp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/hda/hda_codec.c:1704: hda_codec: model 'ref' is selected Aug 22 20:01:05 eames ALSA /var/tmp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/hda/hda_codec.c:2115: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) Aug 22 20:01:05 eames ALSA /var/tmp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/hda/hda_codec.c:2119: speaker_outs=2 (0xe/0x11/0x0/0x0/0x0) Aug 22 20:01:05 eames ALSA /var/tmp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/hda/hda_codec.c:2121: hp=0xd, dig_out=0x9, din_in=0x8 Aug 22 20:01:05 eames ALSA /var/tmp/portage/alsa-driver-1.0.11/work/alsa-driver-1.0.11/pci/hda/hda_codec.c:2129: inputs: mic=0x10, fmic=0xf, line=0x12, fline=0x0, cd=0x0, aux=0x0 Sorry, no idea. Try the latest ALSA sources (1.0.12 should be released any day now). If that doesn't work file a bug report: https://bugtrack.alsa-project.org Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] PDAudio on the Sharp Zaurus SL-C3200 ?
On Sat, 2006-08-26 at 16:46 +, Michael Chapman wrote: PDAudio on the Sharp Zaurus SL-C3200 (also known as Spitz and Teriier) ? We saw this the first time, why do you keep reposting it? Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] volume control on spdif
On Wed, 2006-08-30 at 18:15 +0200, Oliver Eichler wrote: However if I use surround 5.1 raw digital data is sent to the device. I wonder if alsa is able to apply a digital volume control to this stream. If it is possible, would some kind soul tell me how? This isn't really ALSA's job. Can't you enable software volume control in your application? Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] High end usb sound card recommendations?
On Thu, 2006-08-31 at 21:32 +0200, Johannes Wiedersich wrote: Many of the current devices from say Edirol, M-audio or Terratec are not on the list http://www.alsa-project.org/alsa-doc/index.php?vendor=All#matrix which also claims to have seen the last update in March 2005. Any USB device that is class compliant (no driver required on OSX or Windows) will work. Non-compliant/proprietary USB devices almost certainly will not work. This has not changed and is unlikely to change in the forseeable future. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] High end usb sound card recommendations?
On Thu, 2006-08-31 at 12:45 -0700, Bill Unruh wrote: I have a fairly stringent sound card test (www.theory.physics.ubc.ca/soundcard/soundcard.html) that you can try out. The sound card has to be capable of input and output at the same time since it feeds theoutput to the input, and thus tests both at once. Although it is designed for the now outdated OSS, it can be used with ALSA with a bit of effort. Does you tester make sure to test at a hardware-supported sample rate? Otherwise you could be testing the quality of the in-kernel OSS emulation's software resampler... Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Emulating an alsa card on multiple OSS devices
On Sat, 2006-09-02 at 11:58 -0400, Geddes Munson wrote: Greetings, I am trying to get our college radio station to do online streaming, and I am pretty close. Running debian with the 2.6 kernel and the M-Audio M44 sound card. It all works, but I need to run two different encoding programs, darkice for mp3 streaming, and realproducer for streaming to the college's helix server. Both work individually, but I can't get them to work at the same time, when darkice is encoding (live from soundcard) realproducer spits out the error: Error: Could not open audio device '/dev/dsp' When I run it. If I run realproducer first, darkice spits out the same error. How can I configure ALSA to allow multiple applications to tap into the sound cards inputs? You'll have to use applications that support ALSA. /dev/dsp is the legacy OSS API and unless you have a hardware mixing soundcard, using it blocks other applications from using the sound device, as ALSA's software mixing layer is bypassed. You might be able to run the OSS apps using the aoss wrapper but the real solution is for your apps to support ALSA. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] do I need to upgrade alsa 1.0.4 to 1.0.12?
On Thu, 2006-09-07 at 14:50 +0800, littertiger wrote: I'm building an embedded system. I decide to use 2.6.9 kernel with 1.0.4 alsa. but alsa 1.0.4 may don't surport dmix for oss emulation. perhaps some 3rd party applications need oss. so, surporting oss of multi audio stream will be better. No ALSA version supports dmix for (in-kernel) OSS emulation. For an embedded system just use apps that support ALSA. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] do I need to upgrade alsa 1.0.4 to 1.0.12?
On Fri, 2006-09-08 at 08:55 +0800, littertiger wrote: On Thu, 2006-09-07 at 14:50 +0800, littertiger wrote: I'm building an embedded system. I decide to use 2.6.9 kernel with 1.0.4 alsa. but alsa 1.0.4 may don't surport dmix for oss emulation. perhaps some 3rd party applications need oss. so, surporting oss of multi audio stream will be better. No ALSA version supports dmix for (in-kernel) OSS emulation. For an embedded system just use apps that support ALSA. Lee I find a HOWTO of dmix Configuration for OSS Emulation http://gentoo-wiki.com/HOWTO_ALSA_Complete_%28includes_dmix%29#dmix_Configuration_for_OSS_Emulation it says, oss applications can use dmix too. Yes, which is why I mention in-kernel OSS emulation. Dmix only works with user-space OSS emulation (the aoss wrapper), which does not work with every application. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Audio drop-out with ac3 on iec958 during heavy SATA io
On Sun, 2006-09-10 at 14:24 +0200, Dominique Dumont wrote: Takashi Iwai [EMAIL PROTECTED] writes: Then check whether XRUN occurs at next. Make sure that you compiled the driver with debug option (--with-debug=full configure option), then do the following as root: # echo 2 /proc/asound/card0/pcm2p/xrun_debug then play the ac3 file. You'll get stacktraces in kernel messages if XRUN is detected by the sound driver. It's not perfect but an easy way. Since alsa site is down, I've tried to get XRUN traces with the kernel. I've enabled SND_DEBUG and CONFIG_SND_PCM_XRUN_DEBUG. Note that I got a few XRUN while I got a *lot* of ac3 ... err ... hiccups (for lack of a better word). Here's what I got (with your patch) with a recompiled 2.6.17 kernel: (I started ac3dec, then md5sum) Sep 10 13:55:57 gandalf kernel: XRUN: pcmC0D2p Sep 10 13:55:57 gandalf kernel: f0987cdd snd_pcm_period_elapsed+0x1ef/0x27d [snd_pcm] f0b060ad snd_emu10k1_fx8010_interrupt+0x37/0x57 [snd_emu10k1] Sep 10 13:55:57 gandalf kernel: f0affda5 snd_emu10k1_interrupt+0x2ad/0x390 [snd_emu10k1] b0123e04 do_timer+0x3a/0x2e2 I see your kernel uses the ACPI PM timer for timing. Is it a dual core AMD by any chance? If you use an SMP kernel, do you get different results with a UP kernel? Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] ESI U46DJ
On Tue, 2006-09-12 at 20:51 +0200, Lukas Zapletal wrote: Hello, do this external USB soundcard work in ALSA? I cannot find any ESI soundcard in the supported cards matrix. http://www.esi-pro.com/viewProduct.php?pid=60 I want to purchase this one. I need full support. Thanks in advance for any info. Is it compliant with the USB audio standard? Does it work under OSX without having to install a driver? If so, it's supported, otherwise it's not. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Sound quality with SB Live 5.1
On Wed, 2006-09-13 at 16:19 -0300, aluizio-neto wrote: That was the first thing I thought but there`s no capture record volume on my mixer, only the capture feedback, witch doesn`t make any difference in the sound I record... Thanks a lot, Let me guess, kmix? It's buggy. Run alsamixer, press F4 for the capture view, and set the capture volume for the source(s) you want to record. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Sound stops anomalous and goes on after some time
On Thu, 2006-09-14 at 15:52 +0200, Henrik Niehaus wrote: Another thing is, that i have /dev/dsp, but programs using this device like audacity (or cat /dev/urandom /dev/dsp) are mute. Mixer levels are all about 75% Don't use an .asoundrc - dmix should be enabled automatically with a recent ALSA version. Dmix cannot work with direct acess to /dev/dsp - you must run OSS apps with the aoss wrapper. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] VIA K8M890 (8237 chipset) not working with kernel 2.6.18-rc6
On Fri, 2006-09-15 at 14:52 -0300, Martin Sarsale wrote: Dear all: I've just bought this MSI mobo with a VIA K8M890 chipset, and I can't make ALSA work. AFAIK the soundcard is supported by ALSA (via 8237): modules load without problem but do not print anything in dmesg. Then /proc/asound/cards says there're no soundcards. Are you sure your soundcard is not disabled in the BIOS? lspci does not show any audio devices. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] How to get a list of pcm devices
On Sat, 2006-09-16 at 10:38 +0100, Mario Rossi wrote: Hi, I was wondering whether there is a function to get the list of pcm devices? It would be a list which the user could choose from. I've seen that if you run aplay -L you get it, but many of those pcm devices need arguments. aplay -L just calls snd_config_search(..., pcm, ...). Is there a way to get a restricted list of just the actual devices that can be used without arguments? It's a known issue that ALSA has no usable device enumeration API. As far as I know no one is working on solving it. What exactly do you mean by PCM devices need arguments? Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] ALi ac97 soundcard
On Sat, 2006-09-16 at 10:09 -0400, Roger D Vargas wrote: I have a motherboard with an onboard ALi chipset. According to lspci it is a ALi Corporation high Definition Audio/AC97 Host Controller. According to official manual it is anADI1986A 6 Channel High Definition Audio CODEC Is this card supported by alsa? What is the driver name? It should be supported by snd-hda-intel but every machine with an HDA intel codec seems to be wired slightly differently. The only way to know for sure that the device works it to try it. Blame the HW vendors... Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Duplexing (?) Audiophile 2496
On Sat, 2006-09-16 at 12:05 -0500, Bob van der Poel wrote: I recently installed a M-Audio Audiophile 2496 in machine running Mandriva 2006. All, including MIDI, runs just fine. But, it appears that I can only listen to a single stream at one time. I _think_ that it has something to do with the setup of either the /etc/asound.state or the .asoundrc files. I have copied/pasted some .asoundrc examples from this mailing list, but find no difference at all. My alsa version is 1.0.9b. ICE1712 has no hardware mixing, so this is the expected behavior with that ALSA version. Upgrade to a recent ALSA and software mixing (dmix) will be automatically enabled for this card, but you'll have better results just using JACK. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Duplexing (?) Audiophile 2496
On Sat, 2006-09-16 at 17:52 -0500, Bob van der Poel wrote: Thanks, Lee. I'll see if I can get JACK running. But, if there is no hardware mixing ... then what is the point of all those neat little VUE meters in envy24control? The term mixing is overloaded. The device does have a hardware mixer that allows one to set the levels of various input and output channels. What it does not have is the ability to mix multiple audio streams from different applications. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Audio drop-out with ac3 on iec958 during heavy SATA io
On Tue, 2006-09-19 at 18:13 +0200, Takashi Iwai wrote: Well, you've seen the xrun detection there, so it's basically the problem of other parts, such as disk contoller driver. That is, something else takes too long time, and the irq for sound can't be handled at the right time. If the preempt option doesn't solve the problem, I'd recommend you to consult on LKML. Does this help? # echo 64 /sys/block/hdc/queue/max_sectors_kb Replace hdc with sda or whatever the kernel calls your disk and repeat for all disks. It's still a bug IMHO if this is needed, but might make your system usable until the SATA maintainers fix it. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] What are all those devices?
On Tue, 2006-09-19 at 21:58 +0100, Mario Rossi wrote: Hi, I would like to know what is the second device Intel ICH - IEC958. If I try to play via it no sound is emitted aplay -D plughw:0,4 somefile.wav nothing happens. The first device is the actual device, while the third is the modem, what is the second? card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958] ^^ IEC958. AKA S/PDIF. the same for the capture 1 and 2 are MIC and MIC2 (just as the description says). 3 is some kind of ADC, but the driver has no way of knowing what it's connected to, so just calls it ADC. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] C-Media USB soundcard (usb id 0d8c:000c) unable to get to work.
On Tue, 2006-09-19 at 14:48 -0700, Jose Gilberto Torres wrote: aplay -D hw:1,0 ~/GNUstep/Library/WindowMaker/Sounds/unhide.wav Playing WAVE '/home/torresj/GNUstep/Library/WindowMaker/Sounds/unhide.wav' : Unsigned 8 bit, Rate 22050 Hz, Mono aplay: set_params:901: Sample format non available Try plughw:1,0. I was unable to get any of my media players (xmms, mplayer, etc) to work either. I'm running Fedora Core 5. Any suggestions? Both of those have buggy ALSA support. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] switch between two soundcards
On Wed, 2006-09-20 at 00:18 +0200, Jürgen Herrmann wrote: my goal is that applications can always use alsa hw:0:0 without reconfiguration, maybe this could even be automated via hotplug when (dis)connecting the usb device? Applications shouldn't use hw:0,0 anyway, it only supports one app playing at a time, and will fail if the sample rate and format don't exactly match the device's capabilities. The correct solution is for apps to use the ALSA device default, and for a userspace application (like gnome-sound-properties) to change the default device when sound cards are plugged or unplugged or when the user requests it. There's no way to have apps that are playing audio when the device changes to seamlessly switch to the other device though. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] strange period size behaviour
On Thu, 2006-09-21 at 08:55 +0200, Tomas Carnecky wrote: Lee Revell wrote: You are mixing up period_time (which is in microseconds) with period_size (which is in frames). period_time defaults to 125000. Why do you want to use an .asoundrc at all? I want to set period size or time to a value so that the buffer is 16kb - because that's what the application expects. For now I simply made the buffer slightly bigger (18kb) and 'force' the application to use all of it, but I hear periodic artifacts and I think it has something to do with the buffer size since the pauses between them increase proportionally with the buffer size. Well, you won't ever get true zero-copy with this device, because the hardware only supports S32_LE - software format conversion will be required. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] [Alsa-devel] USB card @48kHz only: at what layer to resample?
On Sun, 2006-09-24 at 18:41 +0200, [EMAIL PROTECTED] wrote:
Thanks Markus and all for the replies.
My problem is that STK does not seem able to see the alsa plugins.
In other words, when one uses -say- aplay it is possible to specify what
device or plugin to use with the -D option, for example:
-D plug:duplex
as you suggest in the example.
In the STK api for alsa I can only select one of the audio cards, in my case
I see the following 4:
hw:I82801CAICH3,0
hw:I82801CAICH3,1
hw:U0x4710x311,0
hw:Audio,0
The first two seem to be related to the built-in laptop sound card (intel
chip based) (why 2 entries???)
Probably analog and SPDIF.
, the third one is probably the mic input of the webcam and the last one is
my terratec.
I can only select one of these by number (i.e. I can select 1, 2, 3 or 4)
This is an incorrect use of the ALSA API by STK (It doesn't help that
ALSA has no good device enumeration API). It should allow you to choose
plughw:* devices, but it only lists hw:* devices. This means that only
sample rates supported by the hardware can be chosen.
If I try to open the last one at 44.1kHz I get:
RtApi: unable to open specified device(s) with given stream parameters:
RtApiAlsa: error setting sample rate (44100) on device (hw:Audio,0):
Invalid argument.
If I open it at 48kHz it is fine.
In general, from the discussion I understand that the best (but probably long
term for me) solution is to change my code to work at 48kHz, but for now it's
really important to get the old code to work.
You just need to patch STK to allow plughw devices to be used, or give
up and run at 48Khz. There's no other solution.
Does this make any sense?
Any suggestions?
Thanks,
Enrico
-- Initial Header ---
From : Markus Rechberger [EMAIL PROTECTED]
To : [EMAIL PROTECTED] [EMAIL PROTECTED]
Cc : alsa-user alsa-user@lists.sourceforge.net,alsa-devel
alsa-devel@lists.sourceforge.net
Date : Sun, 24 Sep 2006 16:32:23 +0200
Subject : Re: [Alsa-devel] USB card @48kHz only: at what layer to resample?
Hi,
you could use the alsa rate plugin.
I used following .asoundrc for testing my driver:
pcm.au600playback {
type dmix
ipc_key 1024
ipc_perm 0777
slave {
pcm hw:2,0
period_time 0
period_size 96
buffer_size 1920
format S16_LE
periods 4
rate 9600
}
}
pcm.au600capture {
type rate
slave {
pcm hw:2,1
format S16_LE
rate 9600
}
}
pcm.duplex {
type asym
playback.pcm au600playback
capture.pcm au600capture
}
aplay -D plug:duplex filename
cheers,
Markus
On 9/24/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Dear All,
Apologies in advance if I am asking a stupid question, I am quite new with
alsa. I posting to both lists because I am not sure about handling this
issue at the application development level or at the alsa driver
configuration level.
I am developing an audio application using the CCRMA synthesis tool-kit
(STK) in Fedora Core4 using alsa. I recently bought a Terratec Aureon 5.1
USB MKII card, because I needed to have better sound quality than what
offered by my laptop.
My understanding is that the usb card only works at 48kHz -- is this
correct?
I manage to get aplay to work using the following plugin in
/etc/asound.conf
pcm.!default {
type plug
slave {
pcm hw:2,0
rate 48000
}
}
However, in SKT I can enumerate the audio cards on my machine, but this
does
not give me alsa plugins, only the audio cards. If I try to open the
Aureon
at 44.1kHz, I get an error saying rate not supported.
Is there any way to have alsa handle the rate conversion for me?
Shouldn't
or couldn't the driver take care of this? (Was it my mistake in
installing
the driver? I can post my /etc/modprobe.conf if it helps)
Or is there any way to get STK to see the plugin?
Thank you in advance,
Enrico
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV
___
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Markus Rechberger
Re: [Alsa-user] [Alsa-devel] USB card @48kHz only: at what layer to resample?
On Sun, 2006-09-24 at 08:12 -0700, Bill Unruh wrote: This is audio card insanity. All CDs are at 44100 but for some reason many card manufacturers designed their cards to run at 48000. This is a real problem since this requires rate conversion. Rate conversion is in general a very very noisy operation. In particular simple linear interpolation, which is quick, is also really really terrible for sound quality. DVDs use 48000. But I seem to recall vendors shipping 48Khz-only cards before playing DVD on a computer was common... Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] /dev/dsp not found with kernel 2.6.16.29
On Sun, 2006-09-24 at 21:37 +0200, [EMAIL PROTECTED] wrote: Hallo alsa-users, Currently I'm running alsa driver 1.0.12 with kernel 2.6.16.27. This afternoon I tried to use kernel 2.6.16.29. I used 'make oldconfig' with the config of kernel 2.6.16.27. That made alsa complain that /dev/dsp could not be found. But it *does* exist: /dev/dsp - sound/dsp, permissions 664, owned by root:audio. What might be the problem? (Well, aside from the fact that apps shouldn't be using /dev/dsp in 2006...) Does aplay file.wav work? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] /dev/dsp not found with kernel 2.6.16.29
On Mon, 2006-09-25 at 11:56 +0200, [EMAIL PROTECTED] wrote: LR Does aplay file.wav work? That produces the following: === import === ALSA lib confmisc.c:670:(snd_func_card_driver) cannot find card '0' ALSA lib conf.c:3479:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device ALSA lib confmisc.c:391:(snd_func_concat) error evaluating strings ALSA lib conf.c:3479:(_snd_config_evaluate) function snd_func_concat returned error: No such device ALSA lib confmisc.c:1070:(snd_func_refer) error evaluating name ALSA lib conf.c:3479:(_snd_config_evaluate) function snd_func_refer returned error: No such device ALSA lib conf.c:3947:(snd_config_expand) Evaluate error: No such device ALSA lib pcm.c:2143:(snd_pcm_open_noupdate) Unknown PCM default aplay: main:550: audio open error: No such device === tropmi === This is probably a udev bug. Try updating to the latest udev package your distro offers. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Mon, 2006-09-25 at 10:38 -0400, Lennart Sorensen wrote: Well i agree with the suggestion of trying a different PCI slot for the sb live. There is so much onboard stuff sharing interrupts on those boards that you might have problems because of that. Creative cards are not very good at dealing with anything other than ideal conditions from what I have gathered over the years. The manual for the board will tell you which IRQ goes to which slot, and I guess you want to avoid using a slot that shares with the SATA controller. It might not be interrupt related, it could be DMA starvation. This has been observed with some SATA controllers while testing the -rt patches. The symptom is that the latency traces show the machine going in slow motion. Dominique: try the -rt kernel, enable latency tracing and post the output. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Tue, 2006-09-26 at 16:37 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: Dominique: try the -rt kernel, enable latency tracing and post the output. Should I use 2.6.17 + rt to stay closer to my current setup or should I get 2.6.18 + rt ? I would say 2.6.18 + -rt - it's not as if 2.6.17 could be fixed at this point. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] RME Digi96/8 PST aplay: Channels count not available
On Tue, 2006-09-26 at 11:15 +0200, Ismael Valladolid Torres wrote:
Jack works nicely through this card although I'm still not being able
to output sound via S/PDIF.
So to test S/PDIF I tried a simple aplay, however it's failing
strangely:
$ aplay -D hw:1,0 mlk.wav
Playing WAVE 'mlk.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono
aplay: set_params:906: Channels count non available
Use plughw:1,0
The same using this .asoundrc suggested in AlsaOpensrcOrg:
$ cat .asoundrc
pcm.rme_stereo {
type hw
card 1
}
ctl.rme_stereo {
type hw
card 1
}
pcm.rme_adat {
type hw
card 1
device 1
}
ctl.rme_adat {
type hw
card 1
}
Delete the .asoundrc, it's useless.
Lee
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] hda-intel on Thinkpad T60p fails to load with unable to handle kernel paging request
On Tue, 2006-09-26 at 11:02 +0200, Eivind Tagseth wrote: Sep 26 09:09:10 [kernel] EIP:0060:[c0268bb4]Tainted: GF Why did you forcibly load a module (insmod -f)? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] can't seem to get ac3 passthrough working with ymfpci
On Thu, 2006-09-28 at 14:51 -0400, Brian J. Murrell wrote: I've been trying and trying and I just can't seem to get DD/DTS/AC3 to work. My receiver receives PCM just fine so at least I know the physical bits are working. I have tried both mplayer and ac3dec to drive the card into decoding AC3 but no luck. I believe I have the mixer settings correct. In fact I think I have everything unmuted and at somewhere in the 2/3 volume range. I have IEC958 Loop disabled/muted and Direct Recording Source set to IEC958. What hardware? I think AC3 passthrough cannot work on Nvidia HDA chipsets doe to proprietary undocumented hardware implementation. Can you try the latest ALSA release? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] can't seem to get ac3 passthrough working with ymfpci
On Thu, 2006-09-28 at 15:17 -0400, Brian J. Murrell wrote: What is the latest? I am using Advanced Linux Sound Architecture Driver Version 1.0.10. 1.0.12 is the latest stable release, 1.0.13-rc? the latest development release. So you use the ymfpci driver? Clemens, don't you have this hardware? Should it work? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] set_params:901: Sample format non available
On Sat, 2006-09-30 at 11:07 +0200, Udo van den Heuvel wrote: This stuff worked under Windoze. How can I fix this? Am I doing something wrong? Yes. Use plughw:1 rather than hw:1. Or just use default:1 for automatic rate, format, channel conversion and dmix. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Drop outs under I/O load with Terratec EWX 24/96
On Sat, 2006-09-30 at 15:21 +0200, Dominique Dumont wrote: Jascha Berberich [EMAIL PROTECTED] writes: While there is I/O load on the PCI bus on my mainboard (Asus A7N8X-E deluxe) I got heavy drop outs (xruns) and the sound seems to lower its speed (as an walkman with an empty battery), regardless by witch device the load is produced (the most ugliest drop outs I had with load produced by my S-ATA Seagate harddrives, but also when copying a CD on the harddrives or when having heavy network traffic). Uh oh, this looks like the problem I have with my a7n8x deluxe board + sata IO + drop-out . See the threads http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg17399.html http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg17641.html I'm still digging the issue. Lee Revell asked me to try the -rt kernel, enable latency tracing and post the output. So far, I've can't boot this rt kernel (Still trying though) What are the symptoms? -rt seems to work for everyone on linux-kernel but no one on this list. Can you provide the boot messages? Your .config? You've tested the latest 2.6.18 -rt patch? If you could get these traces on your side, it would be helpfull. Thanks - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Drop outs under I/O load with Terratec EWX 24/96
On Sat, 2006-09-30 at 18:39 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: Lee Revell asked me to try the -rt kernel, enable latency tracing and post the output. So far, I've can't boot this rt kernel (Still trying though) What are the symptoms? -rt seems to work for everyone on linux-kernel but no one on this list. Can you provide the boot messages? I get something like a ooops backtrace involving irq. I did not find any trace of this oops in /var/log so the boot message is lost. Can you take a picture of the screen with a digital camera and post it somewhere? Your .config? See below I'll try to build this. You've tested the latest 2.6.18 -rt patch? Yes. rt2 patch -rt5 is the latest Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Drop outs under I/O load with Terratec EWX 24/96
On Sat, 2006-09-30 at 18:39 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: Lee Revell asked me to try the -rt kernel, enable latency tracing and post the output. So far, I've can't boot this rt kernel (Still trying though) What are the symptoms? -rt seems to work for everyone on linux-kernel but no one on this list. Can you provide the boot messages? I get something like a ooops backtrace involving irq. I did not find any trace of this oops in /var/log so the boot message is lost. Well, my 2.8.18-rt3 system Oopsed while building that kernel, so I have to debug that first ;-) Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Drop outs under I/O load with Terratec EWX 24/96
On Mon, 2006-10-02 at 13:43 +0200, Jascha Berberich wrote: Uhm... I have searched in your threads but couldn't find it. Would be nice if somebody could tell me wow to trace the latency :) Search LKML or LAU archive, this has been explained many times. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] alsa sound problem
On Mon, 2006-10-02 at 14:00 +0300, Martin Ivanov wrote: Hello! I am running Slackware Linux 10.2 with kernel 2.4.31 My question is as follows: When I listen to music for example in xine or any other player, no other sound application is able to run, for example if I am listening to music and someone try to call me in skype, he can not do that. I have noticed that at X shoutdown alsa complains about being unable to open slave. In windows one can play several sound applications simultaneously. I do not believe it is impossible in Slackware. I would be thankful if you suggest me some solution. I thank you in advance. Your ALSA version is probably too old. This should work by default in ALSA 1.0.9 or later. Regards, Martin - vbox7.com - Забавни видео клипове! - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] alsa sound problem
On Mon, 2006-10-02 at 10:20 -0700, Bob wrote: Lee Revell wrote: On Mon, 2006-10-02 at 14:00 +0300, Martin Ivanov wrote: Hello! I am running Slackware Linux 10.2 with kernel 2.4.31 My question is as follows: When I listen to music for example in xine or any other player, no other sound application is able to run, for example if I am listening to music and someone try to call me in skype, he can not do that. I have noticed that at X shoutdown alsa complains about being unable to open slave. In windows one can play several sound applications simultaneously. I do not believe it is impossible in Slackware. I would be thankful if you suggest me some solution. I thank you in advance. Your ALSA version is probably too old. This should work by default in ALSA 1.0.9 or later. I _thought_ I'd asked the same question in regard to my newly installed soundcard and was told about all the different programs which don't play nicely with ALSA. However, I am running ALSA 1.0.9b and I WAS getting multiple input via my cheap builtin motherboard soundcard. But, with the new card (maudio audiophile 2496) I get only one application at a time. Just like the OP on this thread. I think there is a minor config issue, but damned if I can figure out what. You need a newer version than 1.0.9b to get automatic mixing with that card. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] alsa sound problem
On Mon, 2006-10-02 at 10:40 -0700, Bob wrote: Okay. But since the OP did not mention a specific sound card I assumed that you meant that mixing didn't work until 1.0.9 ... and that it did on 1.0.9 and later. I guess the part that I don't get is why the card would make a difference ... doesn't alsa just take multiple inputs from the sound port and mix them and then output to the card? After all, isn't that what a software abstraction layer is for? The card matters because some devices handle this mixing themselves, and it would be inefficient for ALSA to do it also in software. So ALSA needs to know which cards lack hardware mixing support. This was enabled for most cards in 1.0.9 but the ICE1712 and ICE1724 were overlooked. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] configuring ALSA driver to avoid invertion
On Tue, 2006-10-03 at 06:41 +0400, Andrew Gaydenko wrote: Sergei, You are right, as binary signal value increases analog output value decreases. As for reference, I'm an audio DIY-er, almost all signal chain is made by my hand :-) LADSPA is a more high level. ALSA driver configuring is much more appreciated. I don't think it's possible without a LADSPA plugin. ALSA driver does not touch the audio samples. It just sets up DMA between the card and the PC. Andrew === On Tuesday 03 October 2006 06:29, you wrote: === But what do you use as reference ? Or, you mean, as binary signal value increases analog output value decreases ? If so, AFAIR there is LADSPA inverting plugin, or it can be easily written. But, anyway, why do you care ? That is, are there analog outputs which are not inverted, and you need to use the with line out, so you need all of them to be in the same polarity ? --Sergei. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Some questions about the Audigy 2 NX
On Tue, 2006-10-03 at 20:25 +0200, Evgeni Golov wrote: I though, dmix is not needed anymore (or is setup'ed automagicaly)? Not for USB audio. There are too many different devices for a single dmix config to work with them all. You'll have to create your own. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problems with snd hda intel: works only part of the time
On Thu, 2006-10-05 at 20:42 +0200, Dominique Michel wrote: It can be the case if you have an USB sound card as a webcam. The snd_usb_audio will be loaded by hotplug before at alsasound load the alsa modules, and the regular sound card will be the second sound card. If it is the case, you have to add snd-usb-audio (without the double quotes) in /etc/udev/blacklist and alsasound will work as expected. If it not solve the problem, what is the output of lsmod|grep snd Blacklisting snd-usb-audio would be a pretty heavy handed approach. Applications should not rely on any specific card ordering. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Thu, 2006-10-05 at 22:42 +0200, Dominique Dumont wrote: Francesco Peeters [EMAIL PROTECTED] writes: Have you tried using a different slot for the SB Live? Yes. No change at all. (Sorry for the delay). This is going to be a problem with the SATA driver not ALSA. I've heard that some motherboards do evil stuff like implementing legacy drive access modes using SMM which would cause dropouts without xruns reported. Please report it on LKML. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Thu, 2006-10-05 at 22:52 +0100, Alan Cox wrote: Ar Iau, 2006-10-05 am 16:45 -0400, ysgrifennodd Lee Revell: I've heard that some motherboards do evil stuff like implementing legacy drive access modes using SMM which would cause dropouts without xruns reported. They don't. SATA causes audio dropouts on some systems because its fast enough to starve the audio device of regular enough access to the PCI bus. If that is a problem the audio device should be tuning PCI latencies OK. In fact the Windows driver and IIRC the OSS driver do tune PCI latencies. But that can't be the problem here if analog playback is unaffected. Sounds like electrical noise could be the issue... Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Thu, 2006-10-05 at 23:01 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: This is going to be a problem with the SATA driver not ALSA. I've heard that some motherboards do evil stuff like implementing legacy drive access modes using SMM which would cause dropouts without xruns reported. Why do I hear distortion with PCM on SPDIF output and no distortion at all on analog front output ? (both with the SB Live card) Please report it on LKML. Will do. (although your mail and this mail are cc'ed to LKLM) Did you ever try the latency tracer? (See LKML archives for instructions) Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Thu, 2006-10-05 at 23:01 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: This is going to be a problem with the SATA driver not ALSA. I've heard that some motherboards do evil stuff like implementing legacy drive access modes using SMM which would cause dropouts without xruns reported. Why do I hear distortion with PCM on SPDIF output and no distortion at all on analog front output ? (both with the SB Live card) No idea. Maybe SPDIF playback is more sensitive to timing glitches. But the problem must be in the SATA driver not the emu10k1 driver. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problems with snd hda intel: works only part of the time
On Thu, 2006-10-05 at 16:19 -0700, Bill Unruh wrote: On Thu, 5 Oct 2006, Lee Revell wrote: On Thu, 2006-10-05 at 14:33 -0700, Bill Unruh wrote: On Thu, 5 Oct 2006, Lee Revell wrote: On Thu, 2006-10-05 at 20:42 +0200, Dominique Michel wrote: It can be the case if you have an USB sound card as a webcam. The snd_usb_audio will be loaded by hotplug before at alsasound load the alsa modules, and the regular sound card will be the second sound card. If it is the case, you have to add snd-usb-audio (without the double quotes) in /etc/udev/blacklist and alsasound will work as expected. If it not solve the problem, what is the output of lsmod|grep snd Blacklisting snd-usb-audio would be a pretty heavy handed approach. Applications should not rely on any specific card ordering. And people should not speed on the highways. But what if people actually have USB audio devices? There must be a better way... Yes, it is a problem with Linux that one cannot specify the order in which Linux specifies things like soundcards, disk drives, ethernet cards, It tends to depend on the random events during bootup. This is not a problem with Linux. ALSA supports addressing devices by name. Applications that rely on a specific card order are broken. Fix the apps, problem solved. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problems with snd hda intel: works only part of the time
On Fri, 2006-10-06 at 21:37 +0200, Dominique Michel wrote: options snd-snd-usb-audio index=1 [...] alias snd-card-1 snd-usb-audio options snd-snd-usb-audio index=1 snd-snd-usb-audio is wrong, it should be snd-usb-audio. Did you create these files by hand? Or is it a Gentoo bug? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problems with snd hda intel: works only part of the time
On Fri, 2006-10-06 at 22:29 +0200, Sergei Steshenko wrote: I think that we, end users, want the following: * we want to be able to disconnect/reconnect external cards; * we want to be able to use (crappy) internal audio chips for things like Internet telephony; * whenever we disconnect/reconnect external cards, we do NOT want to adjust ALSA configuration files - especially taking into account difficulty creating them. So, the mechanism should allow to assign to cards indices once and for all - regardless whether the card is present or not. Please make sure to file bug reports against any application that relies on a fixed device order. Also, it's not necessary to manage the default card via module parameters. Look at gnome-sound-properties, which sets the default card by changing the definition in the user's ALSA config file. Module indexes are a short-term band aid, they should definitely not be considered a real solution. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Pb with simultaneous SATA and ALSA I/O
On Sat, 2006-10-07 at 14:03 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: Did you ever try the latency tracer? (See LKML archives for instructions) Yes I did (this time better than 2 or 3 days ago :-/ ). - I compiled and booted 2.6.28-rt5 with latency tracer enabled - I verified that I got latency trace enabled (seen trace in kern.log) I only got some traces after running this (detail added for the sake of other newbies like me) : gandalf:/proc/sys/kernel# echo 0 preempt_max_latency Here's the max latency trace I got (note that I got a similar trace *before* running the test, so I'd say it's unrelated to the AC3 drop-out problem.): I think it must be an electrical noise issue. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] PCM distorsion snapshots from SATA/ALSA conflict (was: Pb with simultaneous SATA and ALSA I/O)
(it's probably a bad idea to attach .jpgs to a LKML post - please post them on the web and send a URL) On Sun, 2006-10-08 at 12:38 +0200, Dominique Dumont wrote: Anyway, the oscilloscope shows that: - a spike occurs every 330 useconds (about 3kHz) (note: 330us is 15.85 times the period of the 48KHz spdif stream) - the spike level roughly matches the level of the sine waves 330 useconds sooner You seem to be using a period size of 256 samples - any change if you use a larger period size? Any change if you use setpci to increase LATENCY_TIMER for the SBLive! card? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problems with Creative SoundBlaster Extigy in Ubuntu (Dapper Drake)
On Sun, 2006-10-08 at 19:10 +0200, Stefan Nagy wrote: I tested the soundcard in Window$ and there it workes... I suppose my problem has something to do with some Ubuntu-Update because I didn't do anything else in the past days. Did you not change anything, or did you update Ubuntu? If you did update Ubuntu this should be filed in the Ubuntu bug tracker. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problem with an ice1712 soundcard on recording
On Thu, 2006-10-12 at 08:32 +0100, [EMAIL PROTECTED] wrote: Quoting Lee Revell [EMAIL PROTECTED]: On Wed, 2006-10-11 at 22:02 +0100, [EMAIL PROTECTED] wrote: Hi, I just tried arecord with my m-audio 1010LT arecord x.wav On playback it sounds like it is repeating chunks of the sound then skipping to the next chunk. arecord -f cd x.wav Nothing on playback. I have had success recording/playback using the javax.sound.sampled API. Do we need somethging in .asoundrc ? This file is a mystry to me. What is ttable ? arecord file.wav with no arguments records 8 bit mono at 8Khz. Does arecord -f dat file.wav sound OK? arecord x.wav (8KhZ low is broken with repeating chunks) arecord -f dat x.wav is silent arecord -r 441000 x.wav is not broken but distorted more then 8 bit quantization. I guess you mean 44100? Anyway that last command will record 8 bit audio at 44100Hz which still won't sound good. Try arecord -r 44100 -f S16_LE cheers Paul. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Alsa on RedHat EL4 With Creative SoundBlaster live! value 5.1 card
On Fri, 2006-10-13 at 00:49 +0800, Jason wrote: Hello,list, I install one creative soundblaster live! value 5.1 card, my os is RedHat EL4(AS4) Update4,it's kenel is 2.6.9-42EL, I used alsa 1.0.13rc2 ,I configured alsa-driver with option --with-cards=emu10k1x and make,make install. Then I configured,maked,make installed alsa-lib and alsa-util.After that,system detected that card is Creative Labs [SoundBlaster Live! Value] emu10k1x,and it's driver is emu10k1x.But I run system-config-soundcard,no sound out put but one error message:aplay pcm_write:1258 write error,input/output error.I'm confused with that,everything seems ok. Any help is appreciated. Wrong driver. Use emu10k1 not emu10k1x. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Alsa on RedHat EL4 With Creative SoundBlaster live! value 5.1 card
On Fri, 2006-10-13 at 01:04 +0800, Jason wrote: But before I use RedHat EL4(AS4) update4,I use RedHat EL4(AS4) ,not update4,OS load emu10k1,but same thing occured.BTW,how to change driver? No idea, 2.6.9 is a very old kernel. Ask RedHat why it does not work. Just build ALSA with --with-cards=emu10k1x rather than --with-cards=emu10k1. Lee Thanks for advice! JASON 2006/10/13, Lee Revell [EMAIL PROTECTED]: On Fri, 2006-10-13 at 00:49 +0800, Jason wrote: Hello,list, I install one creative soundblaster live! value 5.1 card, my os is RedHat EL4(AS4) Update4,it's kenel is 2.6.9-42EL, I used alsa 1.0.13rc2 ,I configured alsa-driver with option --with-cards=emu10k1x and make,make install. Then I configured,maked,make installed alsa-lib and alsa-util.After that,system detected that card is Creative Labs [SoundBlaster Live! Value] emu10k1x,and it's driver is emu10k1x.But I run system-config-soundcard,no sound out put but one error message:aplay pcm_write:1258 write error,input/output error.I'm confused with that,everything seems ok. Any help is appreciated. Wrong driver. Use emu10k1 not emu10k1x. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problem with an ice1712 soundcard on recording
On Fri, 2006-10-13 at 18:15 +0200, Udo van den Heuvel wrote: Lee Revell wrote: arecord -f dat x.wav is silent arecord -r 441000 x.wav is not broken but distorted more then 8 bit quantization. I guess you mean 44100? Anyway that last command will record 8 bit audio at 44100Hz which still won't sound good. Try arecord -r 44100 -f S16_LE maybe add -c2 to record stereo: arecord -r 44100 -f S16_LE -c2 blah.wav Overe here mono works OK but stereo gives silence. What is wrong/missing/needs configuration to make recording (from S/PDIF in my case) work? (M-Audio DiO2496) No idea. Must be a driver bug. Please file a report in ALSA bug tracker. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Fri, 2006-10-13 at 16:34 -0400, Nathan A. Smith wrote: On Fri, 2006-10-13 at 09:56 -0400, Lee Revell wrote: On Fri, 2006-10-13 at 04:10 -0400, Nathan A. Smith wrote: Unfortunately, I still am unable to get surround sound to work. The way we were testing this is with speaker-test -Dplug:iec958 -c6 (note: iec958 and spdif are the same for this motherboard). I am getting sound from my left and right speakers, but nothing from anything else. SPDIF only supports 2 channels unless the signal is AC3-encoded. Thanks for the reply Lee, Does that mean I should do something like this: speaker-test -Dplug:iec958 -c6 -w SURROUNDTEST_011212.wav where the wav file is a ac3 encoded file? I don't know if speaker-test will play AC3 encoded files. Try xine or mplayer. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Fri, 2006-10-13 at 16:52 -0400, Nathan A. Smith wrote: On Fri, 2006-10-13 at 16:36 -0400, Lee Revell wrote: On Fri, 2006-10-13 at 16:34 -0400, Nathan A. Smith wrote: On Fri, 2006-10-13 at 09:56 -0400, Lee Revell wrote: On Fri, 2006-10-13 at 04:10 -0400, Nathan A. Smith wrote: Unfortunately, I still am unable to get surround sound to work. The way we were testing this is with speaker-test -Dplug:iec958 -c6 (note: iec958 and spdif are the same for this motherboard). I am getting sound from my left and right speakers, but nothing from anything else. SPDIF only supports 2 channels unless the signal is AC3-encoded. Thanks for the reply Lee, Does that mean I should do something like this: speaker-test -Dplug:iec958 -c6 -w SURROUNDTEST_011212.wav where the wav file is a ac3 encoded file? I don't know if speaker-test will play AC3 encoded files. Try xine or mplayer. Damn, No love at all Sound from Left and right speakers, but nothing else. How do I troubleshoot this? Does the receiver indicate an AC3 signal rather than standard PCM? IIRC AC3 passthrough might not work on nvidia chipsets due to a proprietary hardware implementation, but it might have changed. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Fri, 2006-10-13 at 17:39 -0400, Nathan A. Smith wrote: Does the receiver indicate an AC3 signal rather than standard PCM? No, nothing visibile on my receiver. Do you mean the receiver has no way to display whether it's receiving PCM or AC3, or that the indicator is not active? Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Fri, 2006-10-13 at 21:48 -0400, Nathan A. Smith wrote: BTW: using files from http://www.sr.se/cgi-bin/mall/index.asp?programid=2445 I ran aplay -v ... and got the following, aplay -v SURROUNDTEST_DD_640.wav Are you still testing AC3/DTS/etc passthrough? aplay won't play those files. What happens if you test AC3 passthrough using xine or mplayer as described in this article: http://linuxgazette.net/118/knaggs.html For example: mplayer -ao alsa -ac hwac3 filename.ac3 Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Fri, 2006-10-13 at 22:16 -0400, Nathan A. Smith wrote: Playing SURROUNDTEST_011212.wav. Audio file file format detected. == Forced audio codec: hwac3 Cannot find codec for audio format 0x2001. Read DOCS/HTML/en/codecs.html! == Segmentation fault remember: the test file is from http://www.sr.se/cgi-bin/mall/index.asp?programid=2445 which I found via a link out of an ALSA HOWTO I think that's a DTS/DD file. Try this one: http://downloads.lightspeed.cx/lynne/bjorn_lynne-secret_world_(surround_version).ac3 Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Fri, 2006-10-13 at 22:52 -0400, Nathan A. Smith wrote: On Fri, 2006-10-13 at 22:39 -0400, Lee Revell wrote: I think that's a DTS/DD file. Try this one: http://downloads.lightspeed.cx/lynne/bjorn_lynne-secret_world_(surround_version).ac3 First off Nice song -- I might have to look for more of him/her. Which points out that the file actually worked (and it does sound really nice). So I must ask -- DD/DTS/AC3 are all forms of encoding surround sound. Is it typical that only AC3 works on our systems? Is AC3 the DVD standard (I didn't think so...)? I'm not really a home theater expert, but the DVD standard is AC3 which is also known as DD. DTS is an older, less common format. So you should be able to play DVDs in surround. I'm not sure why the other file didn't work. It looks like mplayer tried and failed to guess the file type? I *think* that if AC3 passthrough works then DTS must work - it's just a matter of setting a non-audio bit on the stream. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Sat, 2006-10-14 at 12:15 +0200, Dominique Dumont wrote: Nathan A. Smith [EMAIL PROTECTED] writes: Does that mean I should do something like this: speaker-test -Dplug:iec958 -c6 -w SURROUNDTEST_011212.wav where the wav file is a ac3 encoded file? No you should use: ac3dec -C some_ac3_file.ac3 No, that will decode the AC3 file on the host in software, what Nathan wants to get working is AC3 passthrough, where the receiver does the AC3 decoding. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Sat, 2006-10-14 at 22:40 +0200, Dominique Dumont wrote:
Lee Revell [EMAIL PROTECTED] writes:
No you should use:
ac3dec -C some_ac3_file.ac3
No, that will decode the AC3 file on the host in software, what Nathan
wants to get working is AC3 passthrough, where the receiver does the AC3
decoding.
Sorry, I must respecfully disagree. I've just tried this command:
$ ac3dec -C en.ac3
Using PCM device 'plug:iec958:{AES0 0x2 AES1 0x82 AES2 0x0 AES3 0x2}'
AC3 Stream 48.0 KHz 384 kbps
And I can see the dolby digital AC3 indication on the display of my
Yamaha DSP-A1 amplifier which means the passthrough is workign fine.
Sorry, I didn't realize that ac3dec supports passthrough with the -C
switch.
(of course without taking into account the sata pb that's plaguing me
;-) )
I'm afraid that is a hardware problem and there's no software solution.
Lee
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] E-mu 1212m support in HG
On Mon, 2006-10-16 at 17:33 +, Matt Bucknall wrote: Hi James, I have tried as you have suggested, but still get the same error message! Any ideas? Matt. The Unsupported soundcard $FOO message is actually quite misleading - it just means that something went wrong such that the build is not possible. Often it's caused by not having the kernel sources installed or not having the same compiler that was used to build the kernel available. (Someone should really fix that). Please provide the complete output of ./hgcompile --with-cards=emu10k1 Lee - Original Message From: James Courtier-Dutton [EMAIL PROTECTED] To: Matt Bucknall [EMAIL PROTECTED] Cc: alsa-user@lists.sourceforge.net Sent: Monday, 16 October, 2006 5:42:13 PM Subject: Re: [Alsa-user] E-mu 1212m support in HG Matt Bucknall wrote: Sorry for being dim, I've not installed ALSA before. I've downloaded the latest HG snapshot (http://suse.inode.at/projects/alsa/snapshot/driver/alsa-driver-hg20061014.tar.bz2) and tried to configure with --use-cards=emu=emu10k1, but the script complains saying 'error: Unsupported soundcard emu10k1'. I've had a look around the 'net to get some info on the problem, but have still had no success. Please can someone talk me through the procedure I need to get ALSA setup with the emu10k module (with 1212m support)?.. or point me to some equivalent information? Thanks, Matt. Download mercurial (alsa called hg) hg clone http://hg-mirror.alsa-project.org/alsa-driver alsa-driver hg clone http://hg-mirror.alsa-project.org/alsa-kernel alsa-kernel cd alsa-driver ./hgcompile --with-cards=emu10k1 make install Do lsmod to check that the old snd-emu10k1 modules is not already loaded. Then do modprobe snd-emu10k1 to load the new alsa module with the emu1212m support. James Send instant messages to your online friends http://uk.messenger.yahoo.com - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] E-mu 1212m support in HG
On Mon, 2006-10-16 at 20:06 +0200, Sergei Steshenko wrote: Why the dependency on compiler is so strong ? I can and do run on my system programs compiled by gcc 3.3.? and gcc 4.0.1, so why ALSA should be different ? Kernel modules must be build by the same compiler as the kernel they will be loaded into. The userspace side of ALSA does not care. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] SB Audigy SE (ca0106): no sound and no /dev/dsp
On Tue, 2006-10-17 at 00:48 +, Matteo Dargor Modesti wrote: Now on Linux i can't hear any sound if i open, for example, an MP3 file with XMMS, and mpg123 tells me Can't open /dev/dsp!. So i searched in /dev and saw that /dev/dsp didn't (and doesn't) exist!! I searched in /dev/snd for it, but in that directory there are only these files: You have no /dev/dsp because the snd_pcm_oss and snd_mixer_oss modules are not loaded. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] alsa buffering
On Wed, 2006-10-18 at 18:51 +0930, Arthur Marsh wrote: [Please note that I run Debian unstable Sid, so I don't know about the availability of packages realtime-lsm and realtime-lsm-source in stable] To enable realtime in your customised Debian 2.6.18 kernel, you need to set under security options: CONFIG_SECURITY_CAPABILITIES=m This will make no difference at all unless the app is specifically written to use realtime scheduling. I don't think this has anythign to do with why OSS apps sound good and ALSA ones don't. Maybe the app is not setting a big enough buffer. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] volume keeps resetting at play
On Thu, 2006-10-19 at 19:47 +0100, sonicx wrote: hello again, i still havent been able to fix the problem of the self-setting pcm_front channel. i have no idea where or how this happens. wasnt able to find anything logged about it, nor was i able to google a resolution or even find a hint in the soundcardlist. this is my soundcard: cat /proc/asound/cards 0 [SI7018 ]: SI7018 - SiS SI7018 SiS SI7018 PCI Audio at 0xd800, irq 11 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x300, irq 10 this didnt happen with a previous install of xubuntu, but i dont quite see the difference or what could be the problem as i now use ubuntu. if i open up a alsamixer i can see the volume go up everytime i play something, resetting just works for the playing song/movie, next title and it goes up again. may this be a gnome problem? i fiddled every option related to sound in gnome i could find but to no avail. someone help me out please, the sound is just terrible this way (distorts when pcm_front sets itself to 100%), and i dont have any other music source then this machine. id gladly try out whatever tip you can give me. thanks, Which application are you testing with? Do you get the same results using aplay to play audio? It sounds like your application, not ALSA, is changing the PCM volume. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Surround sound via optical spdif out
On Sun, 2006-10-22 at 14:18 +0200, Dominique Dumont wrote: Lee Revell [EMAIL PROTECTED] writes: (of course without taking into account the sata pb that's plaguing me ;-) ) I'm afraid that is a hardware problem and there's no software solution. :-( The only way to be sure is to check how this stuff works with Windoze. This is going to take a while as I'm quite windows challenged ;-) It could work on Windows and still be a hardware problem, just because Linux might drive the hardware in a different (but correct) way. For example some people have singing capacitors under Linux but not Windows because of the higher timer IRQ frequency of Linux combined with poorly shielded motherboard components. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Understanding ALSA Mixer
On Mon, 2006-10-23 at 09:34 -0700, Bill Unruh wrote: On Mon, 23 Oct 2006, Mr. Shawn H. Corey wrote: Hi, I have been playing around with ALSA Mixer (actually alsamixergui) and could someone explain some things to me? 1. Why does PCM have a volume control? That, despite its name is teh main output volume control. No, it's not. Master is the main output volume control. PCM controls the level of sound output from applications (as opposed to mic/line in, cd, etc). Windows calls it Wave. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] my module is snd-intel8x0
On Sat, 2006-10-28 at 02:16 -0700, sercan sen wrote: /lib/modules/2.6.9-34.EL.cern/source checking for directory with kernel build... /lib/modules/2.6.9-34.EL.cern/build You seem to be trying to build ALSA against a hacked up vendor kernel from SUSE or RedHat. Please contact the vendor for an ALSA update. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Duplicate sound in two sound cards
On Sun, 2006-10-29 at 15:44 -0300, Salatiel Filho wrote: Hi guys, i have two sound stereo cards on my machine and i'd like to know if it is possible play the same sound in both at same time. I'm not talking about virtual 4 channels sound cards , i just want , Channels : Left on card 0 = left on card 1 right on card 0 = right on card 1 Could anyone provide me a sample to put on my asoundrc ? Cannot be done easily. The two cards will consume data at different rates as their clocks will not be synced. You could set up 2 instances of JACK, run one for each card and connect them with netjack or jack_diplomat, but that will only allow you to run JACK-aware apps. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] snd_ctl_open failed for default: No such device - my /dev/snd/controlC0 doesn't exist!
On Tue, 2006-11-07 at 12:44 -0800, Troy McGuire wrote: My sound was working fine last night, I installed a game, but other than that didn't change any settings/devices/configs on my system. I've tried logging out and rebooting, but it still seems like my sound card doesn't exist anymore :( Does anyone have good advice for me? The game installer must have hosed your /dev. Try uninstalling it, rebooting, then check if those /dev/snd/* files exist. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Help enabling 5.1
On Tue, 2006-11-07 at 23:00 -0300, Salatiel Filho wrote: I'm trying to make my VIA8237 [REALTEK ALC655 REV 0] works in 5.1 mode. I have found int http://alsa.opensrc.org/index.php?page=AlsaTips; Enabling 5+1 outputs on cards with line-out, mic-in and line-in jacks and it talks about my card and my board , but i do not have Mic As Center/LFE Line-In As Surround in alsamixer. How can i make it work ? Please explain exactly how it does not work. Did you try speaker-test --channels 6 --device plug:surround51? Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] No sound on HP dv2000 (dv2058ea) under SUSE 10.1
On Wed, 2006-11-08 at 17:11 +, Anthony B. Coates (Alsa lists) wrote: Alsa has been upgraded to 1.0.11-32. Try a newer version. The current ALSA release is 1.0.13. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Help enabling 5.1
On Wed, 2006-11-08 at 18:11 -0300, Salatiel Filho wrote: So , i tried # speaker-test -Dplug:surround51 -c6 and again sound only on left and right channels. Please post the output of amixer. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] PASS_THROUGH is not working on ALC882.
On Thu, 2006-11-09 at 08:14 +0100, Aleksandrov, Oleg wrote: When I change option SPEAKER_SETUP to PASS_THROUGH I get Audio output unavailable. Device is busy. (). Mplayer is also not able to use spdif/iec958. This way it was configured on my old PC ( AC97 codec ). I tried to use different module options with no success. Another process like ESD or artsd or a web browser must be blocking the sound card. Your device must not support multiple access. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] No sound on HP dv2000 (dv2058ea) under SUSE 10.1
On Sun, 2006-11-12 at 12:04 +0100, steef wrote: Anthony B. Coates (Alsa lists) wrote: OK, here's a follow-up. Note first that I made a mistake when I originally described my setup, as I had installed a pre-compiled version of ALSA 1.0.13-0 (from PackMan). I had an off-line discussion with Steve Sinclair, and he told me that he had found it necessary to set 'model=z71v position_fix=1 disable_mci=1' to the 'options sound-hda-intel ...' line in '/etc/modprobe.d/sound' (in non-SUSE distributions, this may be '/etc/modprobe.d/alsa-base') this last remark is *not* correct as far as it debian_etch and slackware11 concerns. combined with alsa 1.0.13 (compiled into the kernel) and the chip snd-hada-intel 1986A (?)and a textfile options snd-hda-intel index=0 disable_msi=1 in /etc/modprobe.d it makes the driver work flawless on my machine (asus am2 motherboard, may 2006). maybe this magic can make your micro's) see beneath, work too?? Unless you have the exact same codec, this is unlikely to help. To the OP: Conexant codecs are poorly supported now because the vendor refuses to release documentation. Reverse engineering is ongoing. Just wait for new ALSA version. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] /modprobe.d/sound config for audiophile usb
On Mon, 2006-11-13 at 11:38 -0600, Tom Frei wrote: I'm running a 2.6.17.13 kernel on Slackware 11. I am trying to get a M-Audio Audiophile USB to work. No luck yet. You forgot to explain exactly how it doesn't work. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Problems with ALSA + pulseaudio.
On Mon, 2006-11-13 at 17:35 -0800, Avuton Olrich wrote: It's all described in detail in: http://pulseaudio.org/ticket/42 But to give a short for it, sometimes my wife clicks to start ALSA playing; sometimes it plays, sometimes it doesn't. Enabling dmix doesn't seem to help :/. They're pointing at ALSA; load-module module-alsa-sink device=dmix sink_name=output And sometimes when she clicks to start the music: Nov 13 15:56:52 tulip pulseaudio[25762]: socket-server.c: socket(PF_INET6): Address family not supported by protocol Nov 13 15:56:52 tulip pulseaudio[25762]: module.c: Failed to load module module-alsa-sink (argument: device=hw:0 sink_name=alsa_output.pci_10de_6a_alsa_playback_0): init ialization failed. Nov 13 15:56:52 tulip pulseaudio[25762]: module-alsa-sink.c: Error opening PCM device hw:0: Device or resource busy Nov 13 15:56:52 tulip pulseaudio[25762]: alsa-util.c: Unable to attach to mixer dmix: No such file or directory Nov 13 15:56:52 tulip pulseaudio[25762]: alsa-util.c: device doesn't support 44100 Hz, changed to 48000 Hz. I'm really frusterated and was hoping for any help at all. PulseAudio should use the ALSA device default (not dmix or hw:0). It's a bug if Pulse defaults to hw:0. Something must be blocking the soundcard. Next time you get this problem post the output of fuser /dev/dsp and fuser /dev/snd/*. Lee - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] (snd_ctl_open_noupdate) Invalid CTL hw:0
On Tue, 2006-11-14 at 14:53 -0800, Chuck Harrison wrote: Alsa n00b here starting to bring up alsa on an embedded platform: openWRT for the Broadcom mips processor used in wireless routers, I have a Netgear WGT634U. http://www.openwrt.org Probably a build error that causes aplay to look in the build host path rather than the target path. I recently had a similar problem bringing up ALSA on an embedded PPC system. Install strace on your target (it's very easy) and strace the failing aplay process to see which open() call fails. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] snd_hda_intel on Asus M2N32 WS Pro Asus MB
On Wed, 2006-11-15 at 20:51 +0100, Mws wrote: hmm, starting x and kde brought up a freezed machine like i had sometime before. then i took my kernel config again, re-enabled msi make install reboot BUT with kernel cmd pci=nomsi Sounds like upstream kernel bug. Apparently it's a known issue that many machines hang without pci=nomsi. There's a thread on LKML now about how to solve it. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] alsaconf: setup of soundchip VIA 8237 fails - SuSE-Linux 9.2
On Fri, 2006-11-17 at 02:21 +0100, Heinz Knoche wrote: Clemens Ladisch schrieb: Heinz Knoche wrote: Clemens Ladisch schrieb: What are the contents of /proc/asound/cards? cat /proc/asound/cards 0 [rev60 ]: VIA8233 - VIA 823x rev60 VIA 823x rev60 with CMI9761 at 0xd000, irq 3 This codec should be supported even by your old ALSA version. What is the output of amixer contents? Sorry, it's somehow long ... numid=1,iface=MIXER,name='Master Playback Switch' ; type=BOOLEAN,access=rw---,values=1 : values=off You need to unmute this numid=20,iface=MIXER,name='PCM Playback Switch' ; type=BOOLEAN,access=rw---,values=1 : values=off And this numid=7,iface=MIXER,name='Surround Playback Switch' ; type=BOOLEAN,access=rw---,values=2 : values=off,off And this numid=3,iface=MIXER,name='Center Playback Switch' ; type=BOOLEAN,access=rw---,values=1 : values=off And this numid=5,iface=MIXER,name='LFE Playback Switch' ; type=BOOLEAN,access=rw---,values=1 : values=off And this Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] ALSA problem on Taihu board
On Tue, 2006-11-21 at 19:38 -0500, David Cullen wrote: Dear Folks, I am having a problem with ALSA on an AMCC Taihu board. To keep things simple, I am just running speaker-test. The offending line of code is a call to mmap in pcm_mmap.c at line 368. I have used KGDB to trace the call through the kernel, and I cannot figure out the problem. The mmap call succeeds, but the address returned causes an OOPS when accessed. Has anyone else had this type of problem with ALSA on PowerPC platforms? Please post a link to your code. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Amarok, dmix, icecast
On Sat, 2006-11-25 at 16:32 +0100, Emilio Scalise wrote: If you are using a recent alsa version (1.0.11 I think, perhaps also 1.0.10, but I'm not sure..), you don't need to modify your asoundrc or asound.conf. Try to use default:1 as device. It should work out of the box. If not try to assign index 0 to the usb card (with module options) and use default device. Does not apply to USB devices - dmix must be configured manually. Lee 2006/11/25, Denny Schierz [EMAIL PROTECTED]: hi, i have two soundcards: ~$ cat /proc/asound/cards 0 [SoundByLayout ]: AppleOnbdAudio - SoundByLayout SoundByLayout 1 [default]: USB-Audio - C-Media USB Headphone Set C-Media USB Headphone Set at usb-0001:10:1b.2-2.3, full speed i want to stream the sound from Amarok, so i need ices2 which grabs the sound from the USB soundcard. in the ices2.config i have the following choice: input modulealsa/module param name=rate44100/param param name=channels2/param param name=deviceplughw:hw:0,0/param !-- Read metadata (from stdin by default, or -- !-- filename defined below (if the latter, only on SIGUSR1) -- param name=metadata0/param param name=metadatafilenametest/param /input i red, that i need a dmix setup, so that Amarok and ices2 get working together. does anybody has a setup like my one? The onboard soundcard is never used. cu denny == USB Output Bus 002 Device 004: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x0d8c C-Media Electronics, Inc. idProduct 0x000c Audio Adapter bcdDevice1.00 iManufacturer 0 iProduct1 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 253 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength10 bDescriptorType36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 100 bInCollection 2 baInterfaceNr( 0) 1 baInterfaceNr( 1) 2 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0201 Microphone bAssocTerminal 0 bNrChannels 1 wChannelConfig 0x0001 Left Front (L) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 6 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 9 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 7 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 8 iTerminal 0 AudioControl Interface Descriptor: bLength 7 bDescriptorType36 bDescriptorSubtype 5 (SELECTOR_UNIT)
Re: [Alsa-user] Amarok, dmix, icecast
On Mon, 2006-11-27 at 06:47 +0100, Emilio Scalise wrote: I didn't know that I thought that was the same as other cards! It's trickier to enable dmix universally for USB devices. I think Clemens Ladisch was working on a solution? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Amarok, dmix, icecast
On Tue, 2006-11-28 at 19:25 +0100, Denny Schierz wrote: hi, Lee Revell schrieb: It's trickier to enable dmix universally for USB devices. I think Clemens Ladisch was working on a solution? do you know a bit more about that setup? I have no idea, to let Amarok playing and ices2 grab the sound. Try creating an .asoundrc for dmix as described on the ALSA site. cu denny - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] fixed SRC for vdr-softdevice
On Tue, 2006-12-12 at 11:44 +, Harald Milz wrote: http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html (This page is inconsistent about converter vs. rate_converter; using converter instead gives a similar error). What ALSA version? Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] VT8233/8237/snd_via82xx: arecord hangs at 44 bytes
On Tue, 2006-12-12 at 16:58 +0100, Kiesel wrote: $ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC). Try a recent ALSA release. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] ALSA on FC6
On Thu, 2006-12-14 at 16:36 -0800, Fernando Lopez-Lezcano wrote: I would not install from source. Rather you should try making rpm packages of the new version (not easy), so that whatever you do will match what fc is already doing. Shouldn't it be as easy as: rpmbuild -ba alsa-lib-1.x.x/utils/alsa-lib.spec ? Cross compilation is indeed a nightmare, especially if you need to support multiple autotools versions. But native should be trivial... Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Setting the Default Notebook Sound Card?
On Sun, 2006-12-17 at 08:42 +, Q wrote: Hi I have a Toshiba Satellite A100-225 laptop and am running Kubuntu 6.10. Anyway the thing is that my laptop has onboard sound which is an Intel HD Audio Chip (which I believe is based on a Realtek design). The chip for this card is called snd_hda_intel. However I also have an Audigy 2 ZS PCMCIA notebook card. The driver for this card is called snd_emu10k1. Originally with both cards active my Intel HDA card was being loaded as the default card. This was relatively easy to resolve (though not as easy as it should be) by following these guides: If you were using Gnome you could just use gnome-sound-properties to select the default sound card. KDE must have something similar... Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] No sound with ALSA on nVidia MCP51
On Mon, 2006-12-18 at 18:50 +0200, naudefj wrote: Hi, I'm unable to get sound from my newly acquired m2npv-vm mobo with ALSA 1.0.12 (Mandriva 2007). The hardware is working as I can play music with GeeXBox (http://geexbox.org). I've also tried different kernel versions (up to 2.6.19). So, I can only asume it's an ALSA problem. # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.12 (Mon Aug 28 13:46:17 UTC 2006). What ALSA version did geexbox use? With new hardware it's always best to use a recent ALSA version. Try 1.0.14. Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Audacity Line-In Recording with SB Audigy 2 ZS Doesn't Work
On Mon, 2006-12-18 at 23:13 -0600, Dan Star wrote: have a Compaq nx9010 laptop with built in Southbridge Audio. Because it has a flaky head phone jack and the line-in recording quality was bad I bought a SB Audigy 2 ZS PC Card. The SB seems to have disabled the Southbridge because the notebook speakers don't work anymore. No PCMCIA sound card will let you output to the internal speakers - they're hard wired to the internal audio device. This applies to every OS. But the headphone output of the SB is great. The problem is that I use Audacity 1.3 on Mandriva 2007 PWP KDE with all the updates as of 12/16/06 and line-in recording does not work. Audacity states Error while opening sound device. Please check the input device settings and the project sample rate. You may need a newer ALSA version like 1.0.14 for that device. If your distro does not provide up to date ALSA packages and you don't want to risk breaking things you can try a live CD distro like the latest Knoppix... Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] FC6 audio differences
On Wed, 2006-12-20 at 10:33 -0500, Gene Heskett wrote: In an effort to make sure my dual audio setup continued to work, I transfered my FC2's modprobe.conf to the FC6 version. It should work right? No idea. Doesn't FC6 provide a better interface to select the default sound card than editing that file? If you don't run legacy OSS apps, the cleanest solution is the way gnome-sound-properties does it (define default PCM in per-user .asoundrc) Lee - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
