Re: ARS 7.01 -P4
I'm having an issue with the UT similar to what Mary reported with the Admin tool. It crashes whenever I open it. Anyone else experiencing such joy? Rick _ From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Howard Richter Sent: Wednesday, September 05, 2007 7:02 AM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 ** We have had issues with modify all since the first 7.0.1 user took came out. Also in my testing of patch 4 user tool I am getting out of memory errors. Howard On 9/4/07, Matt Reinfeldt <[EMAIL PROTECTED]> wrote: Mary, The only other thing of note so far was a change in behavior in the User Tool... I'm not sure which is correct, the new or the old... however, it had been working consistently up until patch002, but not since ('broken' in patches 003 and 004). In any case, it is no longer possible to use a read-only enum column in a table-field in the run-if of an active link... it's possible that this is only when in a table loop guide. Our solution was to set a R/O enum field on the form rather than the column, and that worked. Other than that, we're still testing it all out. Good luck! Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Sent: Tuesday, September 04, 2007 8:43 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Thank you Matt. It did indeed fix the issue. Any other issues have you encountered? We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev. ~Mary 949-975-5180 ext - 55180 Matt Reinfeldt <[EMAIL PROTECTED] <http://FELDT.COM> FELDT.COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussion Subject list(ARSList)"Re: ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 09/04/2007 05:56 PM Please respond to [EMAIL PROTECTED] RG Mary, Try reinstalling the arserver with the one that was published on 8/30 (last Thursday). We went through the same experience in our development environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved it. Good luck, Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 7:50 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Hi, We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) crashes everytime we open the field properties on any form, any field. Submitted a service request with BMC support today and have not heard anything back yet. Any one else experienced the same issue? Thanks, ~Mary 949-975-5180 ext - 55180 patrick zandi <[EMAIL PROTECTED] COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussion Subject list(ARSList)"ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 08/22/2007 07:06 AM Please respond to [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> RG ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org <http://www.arslist.org> ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org <http://www.arslist.org> ARSlist:"Where the Answers Are" -- Howard Richter Remedy ServiceDesk Manager CedarCrestone Managed Services Center [EMAIL PROTECTED] __20060125___This posting was submitted with H
Re: ARS 7.01 -P4
So, the answer to making an "enhanced" tool functional is to take away the only means provided to make sense of the applications that run on that tool. Yeah, that makes sense. Isn't the point of a patch to make things better? Rick On 9/5/07, Davies, J.T. <[EMAIL PROTECTED]> wrote: > > I encountered this problem too. It seems to originate from the Sync > Search DB functionality. > > BMC Support says to delete the object* forms (and not set up the sync > search db). That fixed my problems without reinstalling. > > I haven't tried to see if the "fixed" P004 allows it to run successfully > again...I'll try it, though. > > J.T. > > -Original Message- > From: Action Request System discussion list(ARSList) > [mailto:[EMAIL PROTECTED] On Behalf Of Matt Reinfeldt > Sent: Tuesday, September 04, 2007 6:54 PM > To: arslist@ARSLIST.ORG > Subject: Re: ARS 7.01 -P4 > > Mary, > > The only other thing of note so far was a change in behavior in the User > Tool... I'm not sure which is correct, the new or the old... however, it > had been working consistently up until patch002, but not since ('broken' > in patches 003 and 004). > > In any case, it is no longer possible to use a read-only enum column in > a table-field in the run-if of an active link... it's possible that this > is only when in a table loop guide. Our solution was to set a R/O enum > field on the form rather than the column, and that worked. > > Other than that, we're still testing it all out. > > Good luck! > > Matt R. > > -Original Message- > From: Action Request System discussion list(ARSList) > [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > Sent: Tuesday, September 04, 2007 8:43 PM > To: arslist@ARSLIST.ORG > Subject: Re: ARS 7.01 -P4 > > Thank you Matt. It did indeed fix the issue. Any other issues have you > encountered? We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev. > > ~Mary > > 949-975-5180 ext - 55180 > > > > > Matt Reinfeldt > > <[EMAIL PROTECTED] > > FELDT.COM> > To > arslist@ARSLIST.ORG > > Sent by: "Action > cc > Request System > > discussion > Subject > list(ARSList)"Re: ARS 7.01 -P4 > > <[EMAIL PROTECTED] > > ORG> > > > > > > 09/04/2007 05:56 > > PM > > > > > > Please respond to > > [EMAIL PROTECTED] > >RG > > > > > > > > > > Mary, > > Try reinstalling the arserver with the one that was published on 8/30 > (last Thursday). We went through the same experience in our development > environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved > it. > > Good luck, > > Matt R. > > -Original Message- > From: Action Request System discussion list(ARSList) > [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > Sent: Tuesday, September 04, 2007 7:50 PM > To: arslist@ARSLIST.ORG > Subject: Re: ARS 7.01 -P4 > > Hi, > > We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation > went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P > 4) crashes everytime we open the field properties on any form, any > field. Submitted a service request with BMC support today and have not > heard anything back yet. > > Any one else experienced the same issue? > > Thanks, > > ~Mary > > 949-975-5180 ext - 55180 > > > > patrick zandi > <[EMAIL PROTECTED] > COM> > To > arslist@ARSLIST.ORG > Sent by: "Action > cc > Request System > discussion > Subject > list(ARSList)"ARS 7.01 -P4 > <[EMAIL PROTECTED] > ORG> > > > 08/22/2007 07:06 > AM > > > Please respond to > [EMAIL PROTECTED] >RG > > > > ** > Anyone install this yet ? even a little, and play? > Any Complaints ? > > ENV: Win 2003 /SP2 > > -- > Patrick Zandi > ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I encountered this problem too. It seems to originate from the Sync Search DB functionality. BMC Support says to delete the object* forms (and not set up the sync search db). That fixed my problems without reinstalling. I haven't tried to see if the "fixed" P004 allows it to run successfully again...I'll try it, though. J.T. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Matt Reinfeldt Sent: Tuesday, September 04, 2007 6:54 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Mary, The only other thing of note so far was a change in behavior in the User Tool... I'm not sure which is correct, the new or the old... however, it had been working consistently up until patch002, but not since ('broken' in patches 003 and 004). In any case, it is no longer possible to use a read-only enum column in a table-field in the run-if of an active link... it's possible that this is only when in a table loop guide. Our solution was to set a R/O enum field on the form rather than the column, and that worked. Other than that, we're still testing it all out. Good luck! Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 8:43 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Thank you Matt. It did indeed fix the issue. Any other issues have you encountered? We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev. ~Mary 949-975-5180 ext - 55180 Matt Reinfeldt <[EMAIL PROTECTED] FELDT.COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussion Subject list(ARSList)"Re: ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 09/04/2007 05:56 PM Please respond to [EMAIL PROTECTED] RG Mary, Try reinstalling the arserver with the one that was published on 8/30 (last Thursday). We went through the same experience in our development environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved it. Good luck, Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 7:50 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Hi, We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) crashes everytime we open the field properties on any form, any field. Submitted a service request with BMC support today and have not heard anything back yet. Any one else experienced the same issue? Thanks, ~Mary 949-975-5180 ext - 55180 patrick zandi <[EMAIL PROTECTED] COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussion Subject list(ARSList)"ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 08/22/2007 07:06 AM Please respond to [EMAIL PROTECTED] RG ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
We have had issues with modify all since the first 7.0.1 user took came out. Also in my testing of patch 4 user tool I am getting out of memory errors. Howard On 9/4/07, Matt Reinfeldt <[EMAIL PROTECTED]> wrote: > > Mary, > > The only other thing of note so far was a change in behavior in the User > Tool... I'm not sure which is correct, the new or the old... however, it > had > been working consistently up until patch002, but not since ('broken' in > patches 003 and 004). > > In any case, it is no longer possible to use a read-only enum column in a > table-field in the run-if of an active link... it's possible that this is > only when in a table loop guide. Our solution was to set a R/O enum field > on the form rather than the column, and that worked. > > Other than that, we're still testing it all out. > > Good luck! > > Matt R. > > -Original Message- > From: Action Request System discussion list(ARSList) > [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > Sent: Tuesday, September 04, 2007 8:43 PM > To: arslist@ARSLIST.ORG > Subject: Re: ARS 7.01 -P4 > > Thank you Matt. It did indeed fix the issue. Any other issues have you > encountered? We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev. > > ~Mary > > 949-975-5180 ext - 55180 > > > > Matt Reinfeldt > <[EMAIL PROTECTED] > FELDT.COM> To > arslist@ARSLIST.ORG > Sent by: "Action cc > Request System > discussionSubject > list(ARSList)"Re: ARS 7.01 -P4 > <[EMAIL PROTECTED] > ORG> > > > 09/04/2007 05:56 > PM > > > Please respond to > [EMAIL PROTECTED] >RG > > > > > > > Mary, > > Try reinstalling the arserver with the one that was published on 8/30 > (last > Thursday). We went through the same experience in our development > environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved > it. > > Good luck, > > Matt R. > > -Original Message- > From: Action Request System discussion list(ARSList) > [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > Sent: Tuesday, September 04, 2007 7:50 PM > To: arslist@ARSLIST.ORG > Subject: Re: ARS 7.01 -P4 > > Hi, > > We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation > went > well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) > crashes everytime > we open the field properties on any form, any field. Submitted a service > request with BMC support today and have not heard anything back yet. > > Any one else experienced the same issue? > > Thanks, > > ~Mary > > 949-975-5180 ext - 55180 > > > > patrick zandi > <[EMAIL PROTECTED] > COM> To > arslist@ARSLIST.ORG > Sent by: "Action cc > Request System > discussionSubject > list(ARSList)"ARS 7.01 -P4 > <[EMAIL PROTECTED] > ORG> > > > 08/22/2007 07:06 > AM > > > Please respond to > [EMAIL PROTECTED] >RG > > > > > > > ** > Anyone install this yet ? even a little, and play? > Any Complaints ? > > ENV: Win 2003 /SP2 > > -- > Patrick Zandi > __20060125___This posting was submitted with HTML in > it___ > > > > > ___ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the > Answers Are" > > > > ___ > > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the Answers Are" > > > > ___ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the > Answers Are" > > > ___ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the Answers Are" > -- Howard Richter Remedy ServiceDesk Manager CedarCrestone Managed Services Center [EMAIL PROTECTED] ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Mary, The only other thing of note so far was a change in behavior in the User Tool... I'm not sure which is correct, the new or the old... however, it had been working consistently up until patch002, but not since ('broken' in patches 003 and 004). In any case, it is no longer possible to use a read-only enum column in a table-field in the run-if of an active link... it's possible that this is only when in a table loop guide. Our solution was to set a R/O enum field on the form rather than the column, and that worked. Other than that, we're still testing it all out. Good luck! Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 8:43 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Thank you Matt. It did indeed fix the issue. Any other issues have you encountered? We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev. ~Mary 949-975-5180 ext - 55180 Matt Reinfeldt <[EMAIL PROTECTED] FELDT.COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussionSubject list(ARSList)"Re: ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 09/04/2007 05:56 PM Please respond to [EMAIL PROTECTED] RG Mary, Try reinstalling the arserver with the one that was published on 8/30 (last Thursday). We went through the same experience in our development environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved it. Good luck, Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 7:50 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Hi, We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) crashes everytime we open the field properties on any form, any field. Submitted a service request with BMC support today and have not heard anything back yet. Any one else experienced the same issue? Thanks, ~Mary 949-975-5180 ext - 55180 patrick zandi <[EMAIL PROTECTED] COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussion Subject list(ARSList)"ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 08/22/2007 07:06 AM Please respond to [EMAIL PROTECTED] RG ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Thank you Matt. It did indeed fix the issue. Any other issues have you encountered? We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev. ~Mary 949-975-5180 ext - 55180 Matt Reinfeldt <[EMAIL PROTECTED] FELDT.COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussionSubject list(ARSList)" Re: ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 09/04/2007 05:56 PM Please respond to [EMAIL PROTECTED] RG Mary, Try reinstalling the arserver with the one that was published on 8/30 (last Thursday). We went through the same experience in our development environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved it. Good luck, Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 7:50 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Hi, We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) crashes everytime we open the field properties on any form, any field. Submitted a service request with BMC support today and have not heard anything back yet. Any one else experienced the same issue? Thanks, ~Mary 949-975-5180 ext - 55180 patrick zandi <[EMAIL PROTECTED] COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussionSubject list(ARSList)"ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 08/22/2007 07:06 AM Please respond to [EMAIL PROTECTED] RG ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Mary, Try reinstalling the arserver with the one that was published on 8/30 (last Thursday). We went through the same experience in our development environment. Installing the "latest" AR Server 7.0.1 Patch004 resolved it. Good luck, Matt R. -Original Message- From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 04, 2007 7:50 PM To: arslist@ARSLIST.ORG Subject: Re: ARS 7.01 -P4 Hi, We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) crashes everytime we open the field properties on any form, any field. Submitted a service request with BMC support today and have not heard anything back yet. Any one else experienced the same issue? Thanks, ~Mary 949-975-5180 ext - 55180 patrick zandi <[EMAIL PROTECTED] COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussionSubject list(ARSList)"ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 08/22/2007 07:06 AM Please respond to [EMAIL PROTECTED] RG ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are" ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Hi, We installed ARS 7.0.1 P 4 on our dev env yesterday. The installation went well w/o errors. HOWEVER, we found a big issue, the Admin tool (P 4) crashes everytime we open the field properties on any form, any field. Submitted a service request with BMC support today and have not heard anything back yet. Any one else experienced the same issue? Thanks, ~Mary 949-975-5180 ext - 55180 patrick zandi <[EMAIL PROTECTED] COM> To arslist@ARSLIST.ORG Sent by: "Action cc Request System discussionSubject list(ARSList)" ARS 7.01 -P4 <[EMAIL PROTECTED] ORG> 08/22/2007 07:06 AM Please respond to [EMAIL PROTECTED] RG ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Not trying to bark too much here.. Have not confirmed this either.. however something to check out.. If you install ARSERVER fresh - and install mid-tier, and then approval server.. >From what I can tell it Wipes out the Demo account. I found in the arcache the demo account -- with an encrypted password -- it was blank password I found in the user form - no accounts -- Hence you cannot login.. If you C:\Program Files\AR System>arcache -Ua -n "TempAdmin" -p "TempAdmin" -e "000 0009" -lw 1 -g "1" -s hd -- you can only login as a guest user, not as an admin. Very Strange -- not sure where to go from here on this one.. Starting over.. On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > Anyone install this yet ? even a little, and play? > Any Complaints ? > > ENV: Win 2003 /SP2 > > -- > Patrick Zandi > -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I put it on another server -- win 2003 sp2 but the db is on another system -- two different clients(systems) -- both ars 7.01 p4. Still have not seen that one.. FYI .. and the audience too. P4 is suppose to be ARSSSO compliant as well -- will be testing soon. day to two.. On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > _just_ got it installed on one of my dev boxes. Using a patch 4 admin > tool, so far any form I open with a table field crashes the admin tool > if you try and look at the field properties of the table itself. > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > Mike > > On 8/22/07, Susan Palmer <[EMAIL PROTECTED]> wrote: > > ** > > I'm just trying to download the migrator portion and it timed-out out > twice. > > I'm getting occasional thread errors with migrator. > > > > Susan > > > > > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > ** > > > Anyone install this yet ? even a little, and play? > > > Any Complaints ? > > > > > > ENV: Win 2003 /SP2 > > > > > > -- > > > Patrick Zandi __20060125___This > > posting was submitted with HTML in it___ > > > > __20060125___This posting was > > submitted with HTML in it___ > > > ___ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the Answers Are" > -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I just installed the latest 7.0.1 patch on Win 2003 and it went in without a hitch, I am still in the process of installing ITSM on top of it though, so I haven't any feedback about how it functions. -- Regards, Louise van Hine KTSL Limited [EMAIL PROTECTED] Quoting patrick zandi <[EMAIL PROTECTED]>: ** Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I've been battling this probem for months! It's about damn time they fixed it! Warren On 8/22/07, Rick Cook <[EMAIL PROTECTED]> wrote: > > ** I didn't have any problem downloading any part of p4 - just finished > it, in fact. I do question why one would need to use P4 of Migrator, since > it only resolves one issue - and a fairly arcane one at that. > > > SW00268652 > > Migrator crashes when opening a server with SCC enabled. > > Rick > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > > ** OK, Thanks.. that is something to watch for.. must be at the server > > side... > > I am running ARS 7.01 P3 Server and UT AT work fine.. > > > > I'll be Sweating on that one.. thanks.. again > > > > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED] > wrote: > > > > > > 7.0.1 patch 4. > > > > > > On 8/22/07, patrick zandi < [EMAIL PROTECTED] > wrote: > > > > ** > > > > Against what Server.. 5.12? > > > > I have user / admintool now on my system and they seem to be working > > > fine so > > > > far.. > > > > The result you had below.. I definately do not get. > > > > > > > > > > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > > > > > > > > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > > > > > _just_ got it installed on one of my dev boxes. Using a patch 4 > > > admin > > > > > tool, so far any form I open with a table field crashes the admin > > > tool > > > > > if you try and look at the field properties of the table itself. > > > > > > > > > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > > > > > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > > > > > > > > > Mike > > > > > > > > > > On 8/22/07, Susan Palmer < [EMAIL PROTECTED]> wrote: > > > > > > ** > > > > > > I'm just trying to download the migrator portion and it > > > timed-out out > > > > twice. > > > > > > I'm getting occasional thread errors with migrator. > > > > > > > > > > > > Susan > > > > > > > > > > > > > > > > > > > > > > > > On 8/22/07, patrick zandi < [EMAIL PROTECTED]> wrote: > > > > > > > ** > > > > > > > Anyone install this yet ? even a little, and play? > > > > > > > Any Complaints ? > > > > > > > > > > > > > > ENV: Win 2003 /SP2 > > > > > > > > > > > > > > -- > > > > > > > Patrick Zandi __20060125___ > > > > __20060125___This posting was submitted with HTML in > it___ > -- Warren R. Baltimore II Remedy Developer UW Medicine IT Services School of Medicine University of Washington Box 358220 1325 Fourth Ave, Suite 2000 Seattle, WA 98101 The opinions expressed in this e-mail are in no way those of the University of Washington, or the State of Washington. They are my own. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I think I found a big bug -- still testing.. tomorrow ;-) issue is the Accounts, after the install you cannot change it even as admin in either the UT or AT.. --- I did this on 2 different boxes.. seeing same error.. you cannot change the servers you connect to. Anyone else getting that ? On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > Anyone install this yet ? even a little, and play? > Any Complaints ? > > ENV: Win 2003 /SP2 > > -- > Patrick Zandi > -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Had to have them put Migrator on a separate ftp site to successfully download it. Installed it and it did not resolve the issue. Even though I was getting error 2004 (thread issue), in actuality the active links were migrated successfully anyway. Go figure ! Susan On 8/22/07, Rick Cook <[EMAIL PROTECTED]> wrote: > > ** I didn't have any problem downloading any part of p4 - just finished > it, in fact. I do question why one would need to use P4 of Migrator, since > it only resolves one issue - and a fairly arcane one at that. > > > SW00268652 > > Migrator crashes when opening a server with SCC enabled. > > Rick > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > > ** OK, Thanks.. that is something to watch for.. must be at the server > > side... > > I am running ARS 7.01 P3 Server and UT AT work fine.. > > > > I'll be Sweating on that one.. thanks.. again > > > > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED] > wrote: > > > > > > 7.0.1 patch 4. > > > > > > On 8/22/07, patrick zandi < [EMAIL PROTECTED] > wrote: > > > > ** > > > > Against what Server.. 5.12? > > > > I have user / admintool now on my system and they seem to be working > > > fine so > > > > far.. > > > > The result you had below.. I definately do not get. > > > > > > > > > > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > > > > > > > > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > > > > > _just_ got it installed on one of my dev boxes. Using a patch 4 > > > admin > > > > > tool, so far any form I open with a table field crashes the admin > > > tool > > > > > if you try and look at the field properties of the table itself. > > > > > > > > > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > > > > > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > > > > > > > > > Mike > > > > > > > > > > On 8/22/07, Susan Palmer < [EMAIL PROTECTED]> wrote: > > > > > > ** > > > > > > I'm just trying to download the migrator portion and it > > > timed-out out > > > > twice. > > > > > > I'm getting occasional thread errors with migrator. > > > > > > > > > > > > Susan > > > > > > > > > > > > > > > > > > > > > > > > On 8/22/07, patrick zandi < [EMAIL PROTECTED]> wrote: > > > > > > > ** > > > > > > > Anyone install this yet ? even a little, and play? > > > > > > > Any Complaints ? > > > > > > > > > > > > > > ENV: Win 2003 /SP2 > > > > > > > > > > > > > > -- > > > > > > > Patrick Zandi __20060125___ > > > > __20060125___This posting was submitted with HTML in > it___ > ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I didn't have any problem downloading any part of p4 - just finished it, in fact. I do question why one would need to use P4 of Migrator, since it only resolves one issue - and a fairly arcane one at that. SW00268652 Migrator crashes when opening a server with SCC enabled. Rick On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > ** OK, Thanks.. that is something to watch for.. must be at the server > side... > I am running ARS 7.01 P3 Server and UT AT work fine.. > > I'll be Sweating on that one.. thanks.. again > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > > > 7.0.1 patch 4. > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED] > wrote: > > > ** > > > Against what Server.. 5.12? > > > I have user / admintool now on my system and they seem to be working > > fine so > > > far.. > > > The result you had below.. I definately do not get. > > > > > > > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > > > > > > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > > > > _just_ got it installed on one of my dev boxes. Using a patch 4 > > admin > > > > tool, so far any form I open with a table field crashes the admin > > tool > > > > if you try and look at the field properties of the table itself. > > > > > > > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > > > > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > > > > > > > Mike > > > > > > > > On 8/22/07, Susan Palmer < [EMAIL PROTECTED]> wrote: > > > > > ** > > > > > I'm just trying to download the migrator portion and it timed-out > > out > > > twice. > > > > > I'm getting occasional thread errors with migrator. > > > > > > > > > > Susan > > > > > > > > > > > > > > > > > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > > > > ** > > > > > > Anyone install this yet ? even a little, and play? > > > > > > Any Complaints ? > > > > > > > > > > > > ENV: Win 2003 /SP2 > > > > > > > > > > > > -- > > > > > > Patrick Zandi __20060125___ > > ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
OK, Thanks.. that is something to watch for.. must be at the server side... I am running ARS 7.01 P3 Server and UT AT work fine.. I'll be Sweating on that one.. thanks.. again On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > 7.0.1 patch 4. > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > ** > > Against what Server.. 5.12? > > I have user / admintool now on my system and they seem to be working > fine so > > far.. > > The result you had below.. I definately do not get. > > > > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > > > > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > > > _just_ got it installed on one of my dev boxes. Using a patch 4 admin > > > tool, so far any form I open with a table field crashes the admin tool > > > if you try and look at the field properties of the table itself. > > > > > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > > > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > > > > > Mike > > > > > > On 8/22/07, Susan Palmer <[EMAIL PROTECTED]> wrote: > > > > ** > > > > I'm just trying to download the migrator portion and it timed-out > out > > twice. > > > > I'm getting occasional thread errors with migrator. > > > > > > > > Susan > > > > > > > > > > > > > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > > > ** > > > > > Anyone install this yet ? even a little, and play? > > > > > Any Complaints ? > > > > > > > > > > ENV: Win 2003 /SP2 > > > > > > > > > > -- > > > > > Patrick Zandi __20060125___This > > > > posting was submitted with HTML in it___ > > > > > > > > __20060125___This posting was > > > > submitted with HTML in it___ > > > > > > > > > ___ > > > UNSUBSCRIBE or access ARSlist Archives at www.arslist.orgARSlist:"Where > > the Answers Are" > > > > > > > > > > > -- > > > > Patrick Zandi __20060125___This posting > > was submitted with HTML in it___ > > > ___ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the Answers Are" > -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
7.0.1 patch 4. On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > ** > Against what Server.. 5.12? > I have user / admintool now on my system and they seem to be working fine so > far.. > The result you had below.. I definately do not get. > > > On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > > _just_ got it installed on one of my dev boxes. Using a patch 4 admin > > tool, so far any form I open with a table field crashes the admin tool > > if you try and look at the field properties of the table itself. > > > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > > > Mike > > > > On 8/22/07, Susan Palmer <[EMAIL PROTECTED]> wrote: > > > ** > > > I'm just trying to download the migrator portion and it timed-out out > twice. > > > I'm getting occasional thread errors with migrator. > > > > > > Susan > > > > > > > > > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > > ** > > > > Anyone install this yet ? even a little, and play? > > > > Any Complaints ? > > > > > > > > ENV: Win 2003 /SP2 > > > > > > > > -- > > > > Patrick Zandi __20060125___This > > > posting was submitted with HTML in it___ > > > > > > __20060125___This posting was > > > submitted with HTML in it___ > > > > > ___ > > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the Answers Are" > > > > > > -- > > Patrick Zandi __20060125___This posting > was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
Against what Server.. 5.12? I have user / admintool now on my system and they seem to be working fine so far.. The result you had below.. I definately do not get. On 8/22/07, Mike Wallick <[EMAIL PROTECTED]> wrote: > > I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I > _just_ got it installed on one of my dev boxes. Using a patch 4 admin > tool, so far any form I open with a table field crashes the admin tool > if you try and look at the field properties of the table itself. > > Lucky for me, I'm not planning on moving to patch 4 anytime soon > (haven't even got my 6.3 to 7.0.1 upgrade done yet!). > > Mike > > On 8/22/07, Susan Palmer <[EMAIL PROTECTED]> wrote: > > ** > > I'm just trying to download the migrator portion and it timed-out out > twice. > > I'm getting occasional thread errors with migrator. > > > > Susan > > > > > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > ** > > > Anyone install this yet ? even a little, and play? > > > Any Complaints ? > > > > > > ENV: Win 2003 /SP2 > > > > > > -- > > > Patrick Zandi __20060125___This > > posting was submitted with HTML in it___ > > > > __20060125___This posting was > > submitted with HTML in it___ > > > ___ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where > the Answers Are" > -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
according to the Doc's your outta luck SW00268652 Migrator crashes when opening a server with SCC enabled. On 8/22/07, Susan Palmer <[EMAIL PROTECTED]> wrote: > > ** I'm just trying to download the migrator portion and it timed-out out > twice. I'm getting occasional thread errors with migrator. > > Susan > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > > > ** Anyone install this yet ? even a little, and play? > > Any Complaints ? > > > > ENV: Win 2003 /SP2 > > > > -- > > Patrick Zandi > > __20060125___This posting was submitted with HTML in > > it___ > > > __20060125___This posting was submitted with HTML in > it___ -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I got the installers downloaded (Win 2K3 SP2, SQL 2000 SP4) and I _just_ got it installed on one of my dev boxes. Using a patch 4 admin tool, so far any form I open with a table field crashes the admin tool if you try and look at the field properties of the table itself. Lucky for me, I'm not planning on moving to patch 4 anytime soon (haven't even got my 6.3 to 7.0.1 upgrade done yet!). Mike On 8/22/07, Susan Palmer <[EMAIL PROTECTED]> wrote: > ** > I'm just trying to download the migrator portion and it timed-out out twice. > I'm getting occasional thread errors with migrator. > > Susan > > > > On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > ** > > Anyone install this yet ? even a little, and play? > > Any Complaints ? > > > > ENV: Win 2003 /SP2 > > > > -- > > Patrick Zandi __20060125___This > posting was submitted with HTML in it___ > > __20060125___This posting was > submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
Re: ARS 7.01 -P4
I'm just trying to download the migrator portion and it timed-out out twice. I'm getting occasional thread errors with migrator. Susan On 8/22/07, patrick zandi <[EMAIL PROTECTED]> wrote: > > ** Anyone install this yet ? even a little, and play? > Any Complaints ? > > ENV: Win 2003 /SP2 > > -- > Patrick Zandi > __20060125___This posting was submitted with HTML in > it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"
ARS 7.01 -P4
Anyone install this yet ? even a little, and play? Any Complaints ? ENV: Win 2003 /SP2 -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the Answers Are"