[Axapta-Knowledge-Village] Product Builder
They produce an item which is composed of different FG (as components) which is not at all fixed. Means BOM changes everytime. I have done the following pls tell me if something has gone wrong I have created 1 modelling variable with Type as table and selected inventtable in this. Then i created a datatype PBAItemId = Item And have done code as Item = 'Type'; But whenever i compile it says no eror but when i run it from sales line it says Field Item Number must be filled in. Can somebody tell mw whr i am wrong ?
[Axapta-Knowledge-Village] Product Builder Urgent Reply Please
Dear All, I have created one configuration design for my item but i am not able to pick up the BOM on two grounds that means i want different BOM should be picked if i select diffe enum. - i have mentioned in case under switch as usual. on calculation basis - Simple Thanks and Regards
[Axapta-Knowledge-Village] Product Builder
Hi All, Is there anways of limiting the record set by a prior selection within the product model. Validation is great for one or two records however when looking at 30 or 40 records it is tedious and difficult to maintain. Thanks
RE: [Axapta-Knowledge-Village] Product Builder
Hi Mohammed, Say what?? Please run that by me slowly From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of mohammed idais Sent: Wednesday, August 29, 2007 2:41 PM To: Axapta-Knowledge-Village@yahoogroups.com Subject: Re: [Axapta-Knowledge-Village] Product Builder hi nitesh ranjain to solve your issue you should used to Validation at variable ,when choose textlite show the colors blue and green . writhe the conditions in the validation . best regards Mohammad Idais Nitesh Ranjan [EMAIL PROTECTED] mailto:niteshranjan007%40yahoo.com wrote: For this you need to create PBA Variable for second field and use first variable to create Query for second variable. Hope this idea will work! Craig Fidler [EMAIL PROTECTED] mailto:cfidler%40bs3.co.za wrote: Hi All, I need a helping hand with regards to Product Builder. I am running Ax4 Sp1,. How do I restrict a user to a selection of records based in a prior selection. E.g. I choose a textile lamp shade the I can only choose red blue or green for the colours. Regards, Craig [Non-text portions of this message have been removed] - Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. [Non-text portions of this message have been removed] - Luggage? GPS? Comic books? Check out fitting gifts for grads at Yahoo! Search. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [Axapta-Knowledge-Village] Product Builder
hi nitesh ranjain to solve your issue you should used to Validation at variable ,when choose textlite show the colors blue and green . writhe the conditions in the validation . best regards Mohammad Idais Nitesh Ranjan [EMAIL PROTECTED] wrote: For this you need to create PBA Variable for second field and use first variable to create Query for second variable. Hope this idea will work! Craig Fidler [EMAIL PROTECTED] wrote: Hi All, I need a helping hand with regards to Product Builder. I am running Ax4 Sp1,. How do I restrict a user to a selection of records based in a prior selection. E.g. I choose a textile lamp shade the I can only choose red blue or green for the colours. Regards, Craig [Non-text portions of this message have been removed] - Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. [Non-text portions of this message have been removed] - Luggage? GPS? Comic books? Check out fitting gifts for grads at Yahoo! Search. [Non-text portions of this message have been removed]
Re: [Axapta-Knowledge-Village] Product Builder
For this you need to create PBA Variable for second field and use first variable to create Query for second variable. Hope this idea will work! Craig Fidler [EMAIL PROTECTED] wrote: Hi All, I need a helping hand with regards to Product Builder. I am running Ax4 Sp1,. How do I restrict a user to a selection of records based in a prior selection. E.g. I choose a textile lamp shade the I can only choose red blue or green for the colours. Regards, Craig [Non-text portions of this message have been removed] - Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. [Non-text portions of this message have been removed]
[Axapta-Knowledge-Village] Product Builder
Hi All, I need a helping hand with regards to Product Builder. I am running Ax4 Sp1,. How do I restrict a user to a selection of records based in a prior selection. E.g. I choose a textile lamp shade the I can only choose red blue or green for the colours. Regards, Craig [Non-text portions of this message have been removed]
[Axapta-Knowledge-Village] Product Builder - Changing a modelling variable type table during execution
Hi, I have the following requirement: A table modelling variable shows the user a list of possible items to choose from based on i.e. Inventtable (ranged on item type items). The item list shown to the user should however be limited based on a selection the user made earlier in the dialog i.e. user selects modelling variable item group value Bulbs. This should limit the items shown in the table variable to items with item group Bulbs. I've been trying to modify the table variable in a post validation rule for variable item group that always results in a true action and adding code to modify the selection into the table variable. No success yet... possibly because I'm not very capable in writing code. Is there any other options? Any help will be appreciated Henricus Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. YAHOO! GROUPS LINKS Visit your group "Axapta-Knowledge-Village" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Axapta-Knowledge-Village] Product Builder
Hi, Have setup a modelling variable of type table. The variable I have setup looks at the InventTable and the primary field is ItemID and it is ranged. The user will then select the raw material/Bom line to be used when creating the new bill of materials. However I am unable to insert the variable in the BOM node. Am I doing something wrong or am I using the wrong variable type? When I use variable type text I am able to insert the variable into the BOm Node. Effectively I want the user to select the type of material and update the Bom node with the ItemId. Thanks for the help The views expressed in this email are, unless otherwise stated, those of the author and not those of the BS3 Group or its management. The information in this e-mail is confidential and is intended solely for the addressee. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data transmitted electronically and to preserve the confidentiality thereof, no liability or responsibility whatsoever is accepted if information or data is, for whatever reason corrupted or does not reach its intended destination. [Non-text portions of this message have been removed] Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Axapta-Knowledge-Village] Product Builder
I'm facing the same problem. To avoid this problem, I have created a temp. simple text variable, and added a simple node in the modeling tree to assign the selected item in this variable b4 the BOM node. Craig [EMAIL PROTECTED] wrote: Hi, Have setup a modelling variable of type table. The variable I have setup looks at the InventTable and the primary field is ItemID and it is ranged. The user will then select the raw material/Bom line to be used when creating the new bill of materials. However I am unable to insert the variable in the BOM node. Am I doing something wrong or am I using the wrong variable type? When I use variable type text I am able to insert the variable into the BOm Node. Effectively I want the user to select the type of material and update the Bom node with the ItemId. Thanks for the help The views expressed in this email are, unless otherwise stated, those of the author and not those of the BS3 Group or its management. The information in this e-mail is confidential and is intended solely for the addressee. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data transmitted electronically and to preserve the confidentiality thereof, no liability or responsibility whatsoever is accepted if information or data is, for whatever reason corrupted or does not reach its intended destination. [Non-text portions of this message have been removed] Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. - YAHOO! GROUPS LINKS Visit your group Axapta-Knowledge-Village on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less. [Non-text portions of this message have been removed] Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder Question
Our company is just in the process of setting up, populating tables, and doing training on Axapta. It will be several months before we go live.The two consultants that are working with us do not have very much knowledge of the Axapta Products Builder. We are a manufacturing company and would like to use the Product Builder to do estimates and quotes on new products. An important requirement is that we be able to save the results of a user session of the Product Builder to a table so that it can be edited in the future. Our estimaters have to gather a lot of data and frequently begin working on an estimate before all the data has been accumulated. They need the ability to save a user session and return to it at any time to enter additional data and/or edit existing information. They will normally not need to generate the BOM and Route until all the data has been entered and verified. I anticipate that they will need the ability to copy an existing configuration to a new configuration and then make some changes to the new configuration in order that the costs of the two can be compared. I am not talking about the product models; I understand that these are permanently saved (until they are deliberately deleted). What we will need is the ability to keep the results of running the configuration user dialog for one of the products models and be able to edit the data previously entered. Is this possible with the Axapta Product Builder? Thanks very much in advance. Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Axapta-Knowledge-Village] Product Builder Question
Hi, I think when you create a Sales Quote the Configuration can be saved and amended later(PB config is saved). Normally in ETO business you would like to start with configuration and save it , so the Product Builder model you build should be having a Item Number Generate rule where by you can track by Sales Quote Item Number generated during the Product Builder Q A. Let me know if you have any doubts. Hemant stanfvaninger [EMAIL PROTECTED] wrote: Our company is just in the process of setting up, populating tables, and doing training on Axapta. It will be several months before we go live.The two consultants that are working with us do not have very much knowledge of the Axapta Products Builder. We are a manufacturing company and would like to use the Product Builder to do estimates and quotes on new products. An important requirement is that we be able to save the results of a user session of the Product Builder to a table so that it can be edited in the future. Our estimaters have to gather a lot of data and frequently begin working on an estimate before all the data has been accumulated. They need the ability to save a user session and return to it at any time to enter additional data and/or edit existing information. They will normally not need to generate the BOM and Route until all the data has been entered and verified. I anticipate that they will need the ability to copy an existing configuration to a new configuration and then make some changes to the new configuration in order that the costs of the two can be compared. I am not talking about the product models; I understand that these are permanently saved (until they are deliberately deleted). What we will need is the ability to keep the results of running the configuration user dialog for one of the products models and be able to edit the data previously entered. Is this possible with the Axapta Product Builder? Thanks very much in advance. Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. SPONSORED LINKS Business finance course Business to business finance Small business finance Business finance consultant Business finance magazine Business finance schools - YAHOO! GROUPS LINKS Visit your group Axapta-Knowledge-Village on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Bring words and photos together (easily) with PhotoMail - it's free and works with Yahoo! Mail. [Non-text portions of this message have been removed] Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Axapta-Knowledge-Village] Product Builder Question
All your selections in the PB are saved in a SQL table , you might need to capture from this table and save them in a master screen. I hope this help. stanfvaninger [EMAIL PROTECTED] wrote: Our company is just in the process of setting up, populating tables, and doing training on Axapta. It will be several months before we go live.The two consultants that are working with us do not have very much knowledge of the Axapta Products Builder. We are a manufacturing company and would like to use the Product Builder to do estimates and quotes on new products. An important requirement is that we be able to save the results of a user session of the Product Builder to a table so that it can be edited in the future. Our estimaters have to gather a lot of data and frequently begin working on an estimate before all the data has been accumulated. They need the ability to save a user session and return to it at any time to enter additional data and/or edit existing information. They will normally not need to generate the BOM and Route until all the data has been entered and verified. I anticipate that they will need the ability to copy an existing configuration to a new configuration and then make some changes to the new configuration in order that the costs of the two can be compared. I am not talking about the product models; I understand that these are permanently saved (until they are deliberately deleted). What we will need is the ability to keep the results of running the configuration user dialog for one of the products models and be able to edit the data previously entered. Is this possible with the Axapta Product Builder? Thanks very much in advance. Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. SPONSORED LINKS Business finance course Business to business finance Small business finance Business finance consultant Business finance magazine Business finance schools - YAHOO! GROUPS LINKS Visit your group Axapta-Knowledge-Village on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Bring words and photos together (easily) with PhotoMail - it's free and works with Yahoo! Mail. [Non-text portions of this message have been removed] Sharing the knowledge on Axapta. Visit www.frappr.com/axapta for axapta friends. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Axapta-Knowledge-Village] Product Builder
Hi Tom, Many thanks for your reply, I managed to sort it out, it was a typical PICNIC error... problem in chair, not in computer - owens/ccs team! Hannes JI Markusse Pr. Sci. Nat. Mobile: + 27 (0) 82 442 1074 E-mail: [EMAIL PROTECTED] If you're not living on the edge, you're taking up too much space... - Anonymous -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Turney Sent: Thursday, June 02, 2005 3:15 PM To: Axapta-Knowledge-Village@yahoogroups.com Subject: RE: [Axapta-Knowledge-Village] Product Builder Hannes, We use a few father/child models and haven't had any problem with them. Unfortunately, I don't have access to product builder documentation any more so if you could explain exactly what you're doing, I can give you more help. Regards, Tom T. -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of slipstream_sa Sent: Thursday, June 02, 2005 3:38 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Product Builder Hi All, I'm trying to build a multi-level product model by using a child product model incorporated into a father product model as described in the Axapta documentation. I've set it up exactly as described in the documentation and both models compile clean, but when I run it in sales or production the tree component of neither models execute at all. Have I missed something special or is there a trick that I don't know about? Has anybody been successful in building a model like this? Any help would be appreciated! Many thanks! Hannes Sharing the knowledge on Axapta. Yahoo! Groups Links Sharing the knowledge on Axapta. Yahoo! Groups Links Yahoo! Groups Sponsor ~-- In low income neighborhoods, 84% do not own computers. At Network for Good, help bridge the Digital Divide! http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder
Hi All, I'm trying to build a multi-level product model by using a child product model incorporated into a father product model as described in the Axapta documentation. I've set it up exactly as described in the documentation and both models compile clean, but when I run it in sales or production the tree component of neither models execute at all. Have I missed something special or is there a trick that I don't know about? Has anybody been successful in building a model like this? Any help would be appreciated! Many thanks! Hannes Yahoo! Groups Sponsor ~-- Has someone you know been affected by illness or disease? Network for Good is THE place to support health awareness efforts! http://us.click.yahoo.com/Rcy2bD/UOnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Axapta-Knowledge-Village] Product Builder
Hannes, We use a few father/child models and haven't had any problem with them. Unfortunately, I don't have access to product builder documentation any more so if you could explain exactly what you're doing, I can give you more help. Regards, Tom T. -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of slipstream_sa Sent: Thursday, June 02, 2005 3:38 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Product Builder Hi All, I'm trying to build a multi-level product model by using a child product model incorporated into a father product model as described in the Axapta documentation. I've set it up exactly as described in the documentation and both models compile clean, but when I run it in sales or production the tree component of neither models execute at all. Have I missed something special or is there a trick that I don't know about? Has anybody been successful in building a model like this? Any help would be appreciated! Many thanks! Hannes Sharing the knowledge on Axapta. Yahoo! Groups Links Yahoo! Groups Sponsor ~-- What would our lives be like without music, dance, and theater? Donate or volunteer in the arts today at Network for Good! http://us.click.yahoo.com/Tcy2bD/SOnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Axapta-Knowledge-Village] Product Builder Validation
Tim, Unfortunately, product builder doesn't make it easy to do things like this. You can do something like this in say the item number validation: str 512 ruleexpr(PBAVarMap varMap) { InventTable InvTable; ; InvTable = InventTable::Find(varMap.Get(ItemNumber)); if (! InvTable) { Box::info( Cannot find item number!); } else { varMap.Set(Description,1,InvTable.Itemname); varMap.Set(Group,1, InvTable.ItemGroup); varMap.Set(Type, 1, InvTable.ItemType); } Return InvTable.NameAlias; } This example shows a way to populate three modeling variables and return a fourth. The problem is that if these modeling variables are visible, the values you set won't display on the forms (even though they are set). Good luck. Regards, Tom T. -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of tsk1958pete Sent: Tuesday, May 31, 2005 9:43 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Product Builder Validation Hi All, In a previous post I asked how to get a value from a table to validate against, Tom T. was kind enough to point me to Return InventTable::Find(varMap.Get(mw_ItemID)).height in my validation action. Now my question is if I need values from say 4 or 5 fields from the InventTable, is there a more efficient way to get them. I come from a Visual FoxPro background where the InventTable::Find would set the record pointer to the correct ItemId and after that I could address the table directly to get field values rather than repetitively calling the find method? I'm wondering if something like the following would work: Return InventTable.width Any thoughts are appreciated Tim Peterson Sharing the knowledge on Axapta. Yahoo! Groups Links Yahoo! Groups Sponsor ~-- What would our lives be like without music, dance, and theater? Donate or volunteer in the arts today at Network for Good! http://us.click.yahoo.com/Tcy2bD/SOnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder Validation
Hi All, In a previous post I asked how to get a value from a table to validate against, Tom T. was kind enough to point me to Return InventTable::Find(varMap.Get(mw_ItemID)).height in my validation action. Now my question is if I need values from say 4 or 5 fields from the InventTable, is there a more efficient way to get them. I come from a Visual FoxPro background where the InventTable::Find would set the record pointer to the correct ItemId and after that I could address the table directly to get field values rather than repetitively calling the find method? I'm wondering if something like the following would work: Return InventTable.width Any thoughts are appreciated Tim Peterson Yahoo! Groups Sponsor ~-- In low income neighborhoods, 84% do not own computers. At Network for Good, help bridge the Digital Divide! http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder - Validation
Hello, When validating in PB how do can I use the value of a Simple var to validate against? I.E. Simple var text - simpColor (Default Value = Blue) Modeling var text input Modeling var enum color (Outcomes=Blue/Green/Red) For user input Blue in input post validate against the default value of simple var simpColor if input == simpColor Then I assume i can accomplish this can't I? Thanks, Tim Peterson Yahoo! Groups Sponsor ~-- What would our lives be like without music, dance, and theater? Donate or volunteer in the arts today at Network for Good! http://us.click.yahoo.com/Tcy2bD/SOnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Axapta-Knowledge-Village] Product Builder - Validation
Tim, Unfortunately, I don't believe you can do this using simple variables. They are only directly addressable in tree section (lower) of the product model. They are not part of the varMap. Tom T. -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of tsk1958pete Sent: Monday, May 23, 2005 11:36 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Product Builder - Validation Hello, When validating in PB how do can I use the value of a Simple var to validate against? I.E. Simple var text - simpColor (Default Value = Blue) Modeling var text input Modeling var enum color (Outcomes=Blue/Green/Red) For user input Blue in input post validate against the default value of simple var simpColor if input == simpColor Then I assume i can accomplish this can't I? Thanks, Tim Peterson Sharing the knowledge on Axapta. Yahoo! Groups Links Yahoo! Groups Sponsor ~-- In low income neighborhoods, 84% do not own computers. At Network for Good, help bridge the Digital Divide! http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Axapta-Knowledge-Village] Product Builder - Enumeration at Runtime
Tim, The way I've done this is using pre-field validations. For example you would create a enumerated text variable with all the different types of cookies available. Based on the result of another selection (say ice cream), you would set pre-field validation rules to exclude items. If you wanted only chocolate and fudge cookies available on selection of chocolate ice cream you would: 1.) Create a variable validation rule on ice cream, call it Ice Cream Type, click the rule button and select pre-field validation rule. 2.) Select the drop down value and in then text column enter chocolate. Click new for a new line (above the current line) and select the variable drop down. In the text field drop down the variables list and select your ice cream variable. Last drop down operation column and select the = sign. 3.) Next click the exclusions button and in this form select the cookie variable and the ones you want to exclude based on you rule in the previous form. You will need to do this for all the exclusions you want to establish. Try it and see if meets your needs. Tom T. -Original Message- From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of tsk1958pete Sent: Saturday, May 21, 2005 11:35 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Product Builder - Enumeration at Runtime Hi All, I'm new to Axapta and working with Product Builder, I think I need to set the enumerated outcomes of a modeling variable at runtime based on the user selection of another variable. Example: Modeling variable 1: Enumerated outcomes Cookies or Ice Cream Based on Selection 1 modeling variable 2 should offer Cookie Chocolate Vanilla Ice Cream Low Fat Kill me now I know I can define 2 seperate variables and determine which to present based on selection in 1. This option is fine for small population of potential outcomes, but what about cases where outcome combinations could run to infinity? There must be a way to add outcomes to a single modeling variable at runtime. Can anyone help me with a few pointers on how this is accomplished? Tim Peterson Sharing the knowledge on Axapta. Yahoo! Groups Links Yahoo! Groups Sponsor ~-- In low income neighborhoods, 84% do not own computers. At Network for Good, help bridge the Digital Divide! http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder - Enumeration at Runtime
Hi All, I'm new to Axapta and working with Product Builder, I think I need to set the enumerated outcomes of a modeling variable at runtime based on the user selection of another variable. Example: Modeling variable 1: Enumerated outcomes Cookies or Ice Cream Based on Selection 1 modeling variable 2 should offer Cookie Chocolate Vanilla Ice Cream Low Fat Kill me now I know I can define 2 seperate variables and determine which to present based on selection in 1. This option is fine for small population of potential outcomes, but what about cases where outcome combinations could run to infinity? There must be a way to add outcomes to a single modeling variable at runtime. Can anyone help me with a few pointers on how this is accomplished? Tim Peterson Yahoo! Groups Sponsor ~-- Has someone you know been affected by illness or disease? Network for Good is THE place to support health awareness efforts! http://us.click.yahoo.com/Rcy2bD/UOnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product builder question
I have a product builder question. I have a variable Cust that is a table variable looking up Name I have another variable PayTerm that is Text type. Is there a way to get the payment term of the customer I select in Cust into PayTerm in the user dialog? In technet I saw how to calculate a variable, for example if thereare variables V1 and V2 and you want V1 = 2 x v1, you could do that by creating a post field validation on V1 and for value for V2 write thiscode: real ruleexpr(PBAVarMap varMap) { return (varMap.Get("V1")*2) } I also know I can get what I want using a table node which basically writes a piece of code as select firstonly tableSearchCustTable where tableSearchCustTable.Name == Cust; PayTerm = tableSearchCustTable.PaymTermId; But I am looking at doing it in the PB user dialog itself. Any help is greatly appreciated. Thanks Yahoo! Mail Mobile Take Yahoo! Mail with you! Check email on your mobile phone. Sharing the knowledge on Axapta. Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Axapta-Knowledge-Village/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Axapta-Knowledge-Village] Product Builder - Enumerated Outcomes
Hi All, New to Axapta and building initial product model, I need to know how to fill the outcomes of an enumerated variable as the product is built based on the results of prior variable input. I would assume this can be done and would appreciate any help and or examples Thanx Yahoo! Groups Sponsor ~-- In low income neighborhoods, 84% do not own computers. At Network for Good, help bridge the Digital Divide! http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder !
Does anybody know how to KEEP a BOM from an item that has been created with the Product Builder in the sales orders linesafter it has been deleted from the sales order lines. Currentlyin axapta you can create an Item with the product builder and you can re-configure, but once you delete the item line from the sales orders axapta keeps the item in the inventory master, but DELETES the BOM from the item. Anyhelp would beappreciate, thanks Yahoo! Groups Sponsor ADVERTISEMENT -- ___Sign-up for Ads Free at Mail.com http://www.mail.com/?sr=signup Sharing the knowledge on Axapta. Yahoo! Groups Sponsor ADVERTISEMENT Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Axapta-Knowledge-Village/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Axapta-Knowledge-Village] Product Builder
Hi All, Has anybody used Product Builder in a Multi-Company evironment? I have a requirement where there are two companies A B, A is the factory with the main distribution warehouse and B is a sales branch with their own warehouse. Configurable items are being sold in company B using the product builder in the sales order entry form to configure them, but those items need to be manufactured by company A. How do I get the configuration details (BOM and Routing etc.) accross to company A without re-configuring the items in company A. Any help will be appreciated. Many thanks Hannes Yahoo! Groups Sponsor ~-- $9.95 domain names from Yahoo!. Register anything. http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Axapta-Knowledge-Village] Product Builder Error
During 'sales order' entry, I run 'function/configure lines' for a modelling enabled item. After making my selection, I press OK and then I receive the following error: Cannot create a record in Bills of material (BOMTable). BOM: , Product model no. PMD-0003. The record already exists. What are possible causes? I have checked that BOMTable has no duplicates. However, error indicates that record already exists. What should I be looking for? Yahoo! Groups Sponsor ~-- Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/kGEolB/TM ~- Sharing the knowledge on Axapta. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/