test
test Thanks, Bob Get free email and a permanent address at http://www.amexmail.com/?A=1 -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebarRstsbodyRsts/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: ISAPI
Hy! While we are at he ISAPI, is anybody familiar with ISAPI programming. Does somebody know a good ISAPI list? Thank you! Bye, Iztok - Original Message - From: "Howie Hamlin" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 11, 2000 03:05 Subject: Re: ISAPI It's an application server. There is an ISAPI that IIS uses to communicate with CF... Howie Hamlin -- inFusion Project Manager; On-Line Data Solutions, Inc. (631)737-4668 www.CoolFusion.com Please vote for iMS in the Most Innovative category here: *** http://www.sys-con.com/ColdFusion/readerschoice2000/ *** Check out inFusion Mail Server - the world's most configurable email server - Original Message - From: Jake Hileman [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, June 10, 2000 10:48 AM Subject: ISAPI Does Cold Fusion run as an ISAPI? Or just as a stand alone web server (CFServer.EXE)? If it runs as an ISAPI... shweee, that would be nice... :-) thanks and let me know, Jake -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Macromedia Ultradev
I purchased Ultradev with the same hope in mind (that it would allow me to stop switching between applications). That hope died. One thing that I was most disappointed about was Ultradev's inability to connect with remote databases for truely "live development". I must say it DOES do a good job of allowing you to develop pages with a local database and see the changes to the page as you design it. Other than that I see no real incentive to upgrading to Ultradev. PS. Im now switching between CFStudio and Ultradev for development :) Sincerely, Shane Witbeck Webmaster [EMAIL PROTECTED] www.digitalsanctum.com -Original Message- From: Dave Watts [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 06, 2000 10:21 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: RE: Macromedia Ultradev I just received a 'special' offer from Macromedia to purchase Ultradev for £199.00 ex VAT. I currently use a combination of Dreamweaver 3 and CF Studio 4.5 and am contemplating whether to go for this offer. It appears that Ultradev effectively combines the above two. Is this a good anology? Anybody used Ultradev and then reverted back to Studio? Is the help as good? Unless you don't mind using Notepad, you'll want to keep Studio around. Ultradev, whether you like it a lot or not, is no replacement for a text editor. Ultradev doesn't provide CF-specific help, either; the help is focused on Ultradev specifically. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ voice: (202) 797-5496 fax: (202) 797-5444 -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=stsbody=sts/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=stsbody=sts/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebarRstsbodyRsts/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
CFIF syntax debate (kind of...)
This is a multi-part message in MIME format. --=_NextPart_000_0032_01BFD909.54A70BF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When using CFIF and using a variable from a form is it better to refer = to the variable using ex: CFIF Form.Var is not "" or can I use CFIF = Var is not "")? Where Var is the variable in question that is from a = form. What is the proper syntax? I looked in the Ben Forta CF book and there = is no mention of this. Please help... --=_NextPart_000_0032_01BFD909.54A70BF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" HTMLHEAD META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type META content=3D"MSHTML 5.00.3017.2400" name=3DGENERATOR STYLE/STYLE /HEAD BODY bgColor=3D#ff DIVFONT face=3DArial size=3D2When using CFIF and using a variable = from a form is=20 it better to refer to the variable using ex:nbsp; lt;CFIF Form.Var is = not=20 ""gt;nbsp; or can I use lt;CFIF Var is not "")?nbsp; Where Var is = the=20 variable in question that is from a form./FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2What is the proper syntax?nbsp; I = looked in the=20 Ben Forta CF book and there is no mention of this./FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2Please help.../FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2nbsp;/DIV/FONT/BODY/HTML --=_NextPart_000_0032_01BFD909.54A70BF0-- -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: cheating: Time Zone rules
Eric, We have that data in a program called "Andromeda" by camp-sys. They might be willing to sell you the data. One other consideration is Europe switches daylight savings time 1 week off from the states. I don't know about other continents, but that's something you don't want to forget. Our flight schedulers for my USAF organization do everything in Universal time (ZULU) and convert it to local for the customers with the data from Camp-Sys. If you have access to the Flight Information Publications (FLIP), the IFR Supplement has time zone information in it. It's an unclassified publication. My guess is you can buy a copy of it from the National Image and Mapping Agency (NIMA). Let me know if you still need help. Tom At 6/7/00 10:10 AM, you wrote: Is there a custom tag that converts time to different time zones around the world. The calculations are relatively simple, but I think you have to worry about different times that daylight savings is in effect. This is going to be used to calculate local times for international airline schedules. Thanks Eric Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: List isn't allowing subscribes...
The CFMAIL to the list which handles subscriptions and such was just backing up in the undelivered directory. I've moved it over and wrote a page to do it automatically. I made the mistake of unsubscribing when I took an extended Memorial Day Weekend. It's taken me over 2 weeks and repeated attempts before I was finally able to re-subscribe yesterday. Nicole Lane Lee Fuller wrote: Anyone else notice this? Lee -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Weird Prepend
All cfm pages on our server seem to get this: !--!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" html head titleUntitled/title /head body /body /html-- prepended at that top of each page. When you open the file it is not there, but when you view source, it is. Therefore, any page that has a body color of black gets overridden by the body that is prepended. Is it something with Studio since that is the template page that comes up when you start it??? Any ideas would be greatly appreciated. Thanks in advance! -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: test 6/17/00 15:00 PST
maybe. :) Is the list fixed now? -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Comment tag
Hi! I have a loop on a template, but is comented for developing purposes. But I notice that until I remove the loop from the template, it henerates *many* blank lines, and the size of the html increase signifficantly. Can anyone tell me how to get rid of these blank lines, and if it is a setting somewhere that generate this error? I use CF server Studio 4.01 Thank you -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: studio errors
It appears you are running this under windows NT or Windows 2000, I am running CF Studio 4.5.1 and also bet tested it through its beta stages. I have never seen this error in doing all the installations of the betas. However, if its running under NT or Windows 2000 you will find that some rouge software you have installed might actually be the problem. I have used all the features you are having problems with, all with 100% succes in the use of it. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Kear Sent: Thursday, 8 June 2000 12:34 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: studio errors This happens to me too. Allaire haven't shown the slightest interest in helping me with it either, no matter how I report it. Basically, I think they've created something and don't have a clue how to make it work. It costs more than A$1000. I also bought a 2 year subscription and after 3 months I haven't been able to make it produce a single template. I'm still using the old version. For such an expensive package, it doesnt do even the most basic things properly, and isn't up to the standard of a year 1 programmer's effort. THe only suggestion I've been able to squeeze out of their support is that there's a bug in the deployment wizard and you have to make sure you upload the entire project not the changed files. Big deal. IT still won't install properly and it still gives those exception errors. I believe it fails the test under the Sale of Goods ACt that it be of merchantable quality, and therefore I have an action against them in the courts. If there's no sign of interest by Allaire or their distributor, Firmware eDesign soon, I'm going to be taking them to court over it. My advice is, don't touch Studio 4.5.1 with a barge pole unless you don't mind never using for anything other than a text editor. Pity, cos the demo (obviously a big fraud because it worked) looked pretty good. If I ever hear of a fix for my problems, I'll be sure to let you all know. Cheers, AFP Web Development Windsor, NSW Australia http://www.afp.zip.com.au On Sun, 4 Jun 2000, Greg Saunders wrote: I'm running Studio 4.5.1, and seeing lots of exception errors. I reboot my machine, start Studio, and then quit, and I get: Application Error: Exception EAccessViolation in module cfstudio45.exe at address 004F9614 in module 'cfstudio45.exe'. Read of address 01ADC064. This happens repeatedly when I quit. It did not happen when I first installed 4.5, but it seems suddenly frequent, and I'm not sure what changed. Also, occasionally when I save a file, the file is saved, but the file tab still shows the file as unsaved, and I occasionally also get exception errors while editing. Any ideas what would cause this? Should I reinstall? Originally I was running 4.0, then I installed a 4.5 upgrade, and finally I installed the 4.5.1 upgrade. If I reinstall, do I need to follow these steps again, or is the 4.5.1 upgrade a complete version? Gregory M. Saunders, Ph.D. Senior Design Architect Cognitive Arts Corporation (http://www.cognitivearts.com) 1840 Oak Avenue, 4th Floor Evanston, IL 60201-5914 -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Connecting Input/Action Forms
Hi Sally, Thank you for the response. I'm developing my first CF application and didn't comprehend the FORM command. I now have five consecutive forms running. Have a nice day. Regards, Paige - Original Message - From: Shally Kon [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, June 17, 2000 11:43 AM Subject: RE: Connecting Input/Action Forms I think you missed with CFFORM tag you will have to use this tag and write the action in side this tag Shally -Original Message-- From: "Paige Chandler" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: June 14, 2000 8:02:46 PM GMT Subject: Connecting Input/Action Forms This is a multi-part message in MIME format. --=_NextPart_000_0007_01BFD619.FB2F22C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello All, I'm using an Entry form to allow the user to INPUT ID and Password. I = return an Action form with "Welcome John Smith" etc. I can then display = Radio Buttons giving the user options to search for a record in database = - Search by: Name, Member No. etc.=20 The next Entry form will display the appropriate INPUT field to do the = search and an Action form with results.=20 How do I connect the first Action form to the second Entry form? Can I = "nest" forms? Is there a sample of this code somewere?=20 --=_NextPart_000_0007_01BFD619.FB2F22C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" HTMLHEAD META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type META content=3D"MSHTML 5.00.2314.1000" name=3DGENERATOR STYLE/STYLE /HEAD BODY bgColor=3D#ff DIVFONT face=3DArial size=3D2 PHello All, PI'm using an Entry form to allow the user to INPUT ID and Password. I = return=20 an Action form with "Welcome John Smith" etc. I can then display Radio = Buttons=20 giving the user options to search for a record in database - Search by: = Name,=20 Member No. etc.=20 PThe next Entry form will display the appropriate INPUT field to do = the search=20 and an Action form with results.=20 PHow do I connect the first Action form to the second Entry form? Can = I "nest"=20 forms? Is there a sample of this code somewere? = /P/FONT/DIV/BODY/HTML --=_NextPart_000_0007_01BFD619.FB2F22C0-- -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. --- FREE! The World's Best Email Address @email.com Reserve your name now at http://www.email.com -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
a test
this is a test Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: CFIF syntax debate (kind of...)
If the question is whether or not to scope your variables, the answer is:
always scope your variables.
Scoping does a couple of things. One, it improves codes readability
immensely. Imagine the following code in a 1500 line template:
cfelseif IsDefined('lPageID')
Someone who is unfamiliar with the code will have no idea where this is
supposed to be coming from. Isn't this easier:
cfelseif IsDefined('url.lPageID')
Now it's obvious that the code is looking for a URL variable.
Second, it removes a bit of overhead. If you don't scope a variable, CF has
to search through all of the variable scope types to figure out which one
this relates to. Obviously if you tell CF where to look, CF doesn't have to
work so hard.
[Note: I'm not completely sure if this is true. Any gurus out there? Does
CF still examine all scopes when identifying scopeX.variable? I'm thinking
about the differences in housekeeping between local and global vars more
than anything else here, EG, session.var vs. variables.var]
As to the example, I'd rewrite it as:
CFIF LEN(form.var)
Here you're doing a numeric calc, as opposed to a string comparison.
Numerics are much faster. IE; LEN(scopeX.somevar) will evaluate to either 0
(no content) or the length of the variable. If it's 0, CFIF evaluates to
false, otherwise it's true. Very quick, easier to type, and IMO, it's
easier to read.
Good luck!
Jeff
-Original Message-
From: Phil Labonte [mailto:[EMAIL PROTECTED]]
Sent: Sunday, June 18, 2000 9:41 AM
To: [EMAIL PROTECTED]
Subject: CFIF syntax debate (kind of...)
This is a multi-part message in MIME format.
--=_NextPart_000_0032_01BFD909.54A70BF0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
When using CFIF and using a variable from a form is it better to refer =
to the variable using ex: CFIF Form.Var is not "" or can I use CFIF =
Var is not "")? Where Var is the variable in question that is from a =
form.
What is the proper syntax? I looked in the Ben Forta CF book and there =
is no mention of this.
Please help...
--=_NextPart_000_0032_01BFD909.54A70BF0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
HTMLHEAD
META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type
META content=3D"MSHTML 5.00.3017.2400" name=3DGENERATOR
STYLE/STYLE
/HEAD
BODY bgColor=3D#ff
DIVFONT face=3DArial size=3D2When using CFIF and using a variable =
from a form is=20
it better to refer to the variable using ex:nbsp; lt;CFIF Form.Var is =
not=20
""gt;nbsp; or can I use lt;CFIF Var is not "")?nbsp; Where Var is =
the=20
variable in question that is from a form./FONT/DIV
DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV
DIVFONT face=3DArial size=3D2What is the proper syntax?nbsp; I =
looked in the=20
Ben Forta CF book and there is no mention of this./FONT/DIV
DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV
DIVFONT face=3DArial size=3D2Please help.../FONT/DIV
DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV
DIVFONT face=3DArial size=3D2nbsp;/DIV/FONT/BODY/HTML
--=_NextPart_000_0032_01BFD909.54A70BF0--
--
Archives: http://www.eGroups.com/list/cf-talk
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or
send a message to [EMAIL PROTECTED] with 'unsubscribe' in
the body.
--
Archives: http://www.eGroups.com/list/cf-talk
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: ISAPI
While we are at he ISAPI, is anybody familiar with ISAPI programming. Does somebody know a good ISAPI list? www.15seconds.com might have something for you. Len -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: CFIF syntax debate (kind of...)
In fact Cfif Len(trim(Form.Var)) is better as it is faster or if doing a string comparison cfif (FindNoCase(Form.Val,Whatever)) ~JustinMacCarthy - Original Message - From: Phil Labonte [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 2:41 PM Subject: CFIF syntax debate (kind of...) This is a multi-part message in MIME format. --=_NextPart_000_0032_01BFD909.54A70BF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When using CFIF and using a variable from a form is it better to refer = to the variable using ex: CFIF Form.Var is not "" or can I use CFIF = Var is not "")? Where Var is the variable in question that is from a = form. What is the proper syntax? I looked in the Ben Forta CF book and there = is no mention of this. Please help... --=_NextPart_000_0032_01BFD909.54A70BF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" HTMLHEAD META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type META content=3D"MSHTML 5.00.3017.2400" name=3DGENERATOR STYLE/STYLE /HEAD BODY bgColor=3D#ff DIVFONT face=3DArial size=3D2When using CFIF and using a variable = from a form is=20 it better to refer to the variable using ex:nbsp; lt;CFIF Form.Var is = not=20 ""gt;nbsp; or can I use lt;CFIF Var is not "")?nbsp; Where Var is = the=20 variable in question that is from a form./FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2What is the proper syntax?nbsp; I = looked in the=20 Ben Forta CF book and there is no mention of this./FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2Please help.../FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2nbsp;/DIV/FONT/BODY/HTML --=_NextPart_000_0032_01BFD909.54A70BF0-- -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Weird Prepend
You check your application.cfm file ??? ~Justin MacCarthy - Original Message - From: [ W E B D i V A ] [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 2:10 PM Subject: Weird Prepend All cfm pages on our server seem to get this: !--!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" html head titleUntitled/title /head body /body /html-- prepended at that top of each page. When you open the file it is not there, but when you view source, it is. Therefore, any page that has a body color of black gets overridden by the body that is prepended. Is it something with Studio since that is the template page that comes up when you start it??? Any ideas would be greatly appreciated. Thanks in advance! -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: cheating: Time Zone rules
But don't forget Eric, when you're working out time zones, that some countries have a habit of chopping and changing the daylight saving dates. In New South Wales for example, we're going to summer time in September this year - weeks early - because of the American TV networks and the Olympics. But it still doesn't mean there's going to be a single frame of live Olympics coverage on US TV. To my amazement, it's been announced that every last second of TV coverage in the USA is going to be delayed!!! A great opportunity for those who like to bet on sports!! Our states make up their own minds as to what dates they're going to change. There are some poor beknighted individuals in towns near the border of NSW and Victoria who can never predict when the changes are going to be. Sorry but it 'tain't my fault yer honour! Cheers, Mike Kear AFP Web Dvelopment Windsor, NSW, Australia http://www.afp.zip.com.au At 10:10 AM 07-06-00 CDT, Eric Dawson wrote: Is there a custom tag that converts time to different time zones around the world. The calculations are relatively simple, but I think you have to worry about different times that daylight savings is in effect. This is going to be used to calculate local times for international airline schedules. Thanks Eric -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: test
These tests are getting harder and harder, can't you people ask easy questions :-)? Do we really need to test the list so often? -Original Message- From: Bob Smith [mailto:[EMAIL PROTECTED]] Sent: 18 June 2000 17:36 To: [EMAIL PROTECTED] Subject: test test Thanks, Bob Get free email and a permanent address at http://www.amexmail.com/?A=1 -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Comment tag
I have a weird problem: all my coments aperar on the htmp generated page, which is not what I want! How can I fix this? Thank you -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: CFIF syntax debate (kind of...)
Second, it removes a bit of overhead. If you don't scope a variable, CF has to search through all of the variable scope types to figure out which one this relates to. Obviously if you tell CF where to look, CF doesn't have to work so hard. True ... Jeff -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: CFIF syntax debate (kind of...)
There is also the Caller scope coming from a tag. Of course all of this is a bit easier if you go to http://www.fusebox.org/files/formurl2attributes.zip and get the Then you doen't really have to worry about form and url scopes as they will always be attribute scopes. Changing these variables to attributes scope makes it much easier to CFMODULE to another application. While you are picking up that tag you might want to read up on the fusebox methodology (http://www.fusebox.org/index.cfm?fuseaction=Spec). Fusebox is a nice way to keep your code clean. And if you are just starting out there are some nice tutorials also. - Original Message - From: "Todd Mathews" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 2:27 PM Subject: Re: CFIF syntax debate (kind of...) At 03:42 PM 6/18/2000 -0400, you wrote: what kind of scopes are there? Form, url, session... anything else? Where can I get more information about doing my code with the proper syntax? I looked through the Ben Forta CF book and it does not mention this... There are also application and client scopes as well. Which Forta book do you have? The CF docs also have a fair amount of info covering these but it is spread out so you will have to dig around a bit. Todd -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
CF 4.5 and Crystal Reports 8
Does anyone know how to get CF to connect to CR 8. Allaire says they do not support CR 8 so they were not much help -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: CFIF syntax debate (kind of...)
cfif form.Var is not "" it works Pavan Kumar Puli WebMaster/IT Manager ABC Interactive http://www.abcinteractive.com.au - Original Message - From: Phil Labonte [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 11:41 PM Subject: CFIF syntax debate (kind of...) This is a multi-part message in MIME format. --=_NextPart_000_0032_01BFD909.54A70BF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When using CFIF and using a variable from a form is it better to refer = to the variable using ex: CFIF Form.Var is not "" or can I use CFIF = Var is not "")? Where Var is the variable in question that is from a = form. What is the proper syntax? I looked in the Ben Forta CF book and there = is no mention of this. Please help... --=_NextPart_000_0032_01BFD909.54A70BF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" HTMLHEAD META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type META content=3D"MSHTML 5.00.3017.2400" name=3DGENERATOR STYLE/STYLE /HEAD BODY bgColor=3D#ff DIVFONT face=3DArial size=3D2When using CFIF and using a variable = from a form is=20 it better to refer to the variable using ex:nbsp; lt;CFIF Form.Var is = not=20 ""gt;nbsp; or can I use lt;CFIF Var is not "")?nbsp; Where Var is = the=20 variable in question that is from a form./FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2What is the proper syntax?nbsp; I = looked in the=20 Ben Forta CF book and there is no mention of this./FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2Please help.../FONT/DIV DIVFONT face=3DArial size=3D2/FONTnbsp;/DIV DIVFONT face=3DArial size=3D2nbsp;/DIV/FONT/BODY/HTML --=_NextPart_000_0032_01BFD909.54A70BF0-- -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: studio errors
Well thanks for that Andrew - it means that it IS POSSIBLE that at the end of this saga that's now been going for more than 2 months, I might have a Studio that works. it **IS** possible the thing is going to be usable. It's running in Windows98 64MB and I've tried it in Windows95/48MB But on the plus side, I'm pleased to report that after all this time Allaire's support has finally woken up and offered a suggestion. Perhaps I have two web servers running. (I don't). Not much progress, but it **IS** progress. Andrew thanks for your suggestion and for giving me the confidence to continue. I was starting to think I'm better just to cut my losses, throw a A$1000 program away and suggest my clients buy another program. I was not looking forward to telling them they have to throw out that amount of money. Cheers, Mike Kear AFP Web Development Webmaster, Australian Consumers Association Windsor, NSW, Australia On Sun, 18 Jun 2000, Andrew Scott wrote: It appears you are running this under windows NT or Windows 2000, I am running CF Studio 4.5.1 and also bet tested it through its beta stages. I have never seen this error in doing all the installations of the betas. However, if its running under NT or Windows 2000 you will find that some rouge software you have installed might actually be the problem. I have used all the features you are having problems with, all with 100% succes in the use of it. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Kear Sent: Thursday, 8 June 2000 12:34 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: studio errors This happens to me too. Allaire haven't shown the slightest interest in helping me with it either, no matter how I report it. Basically, I think they've created something and don't have a clue how to make it work. It costs more than A$1000. I also bought a 2 year subscription and after 3 months I haven't been able to make it produce a single template. I'm still using the old version. For such an expensive package, it doesnt do even the most basic things properly, and isn't up to the standard of a year 1 programmer's effort. THe only suggestion I've been able to squeeze out of their support is that there's a bug in the deployment wizard and you have to make sure you upload the entire project not the changed files. Big deal. IT still won't install properly and it still gives those exception errors. I believe it fails the test under the Sale of Goods ACt that it be of merchantable quality, and therefore I have an action against them in the courts. If there's no sign of interest by Allaire or their distributor, Firmware eDesign soon, I'm going to be taking them to court over it. My advice is, don't touch Studio 4.5.1 with a barge pole unless you don't mind never using for anything other than a text editor. Pity, cos the demo (obviously a big fraud because it worked) looked pretty good. If I ever hear of a fix for my problems, I'll be sure to let you all know. Cheers, AFP Web Development Windsor, NSW Australia http://www.afp.zip.com.au On Sun, 4 Jun 2000, Greg Saunders wrote: I'm running Studio 4.5.1, and seeing lots of exception errors. I reboot my machine, start Studio, and then quit, and I get: Application Error: Exception EAccessViolation in module cfstudio45.exe at address 004F9614 in module 'cfstudio45.exe'. Read of address 01ADC064. This happens repeatedly when I quit. It did not happen when I first installed 4.5, but it seems suddenly frequent, and I'm not sure what changed. Also, occasionally when I save a file, the file is saved, but the file tab still shows the file as unsaved, and I occasionally also get exception errors while editing. Any ideas what would cause this? Should I reinstall? Originally I was running 4.0, then I installed a 4.5 upgrade, and finally I installed the 4.5.1 upgrade. If I reinstall, do I need to follow these steps again, or is the 4.5.1 upgrade a complete version? Gregory M. Saunders, Ph.D. Senior Design Architect Cognitive Arts Corporation (http://www.cognitivearts.com) 1840 Oak Avenue, 4th Floor Evanston, IL 60201-5914 -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. --
RE: studio errors
Yeah I could see how that could be frustrating, but there are problems with the latest studio. But they are only little anoying bugs with a work around. Nothing like you were describing. Can I ask does you environment only have the one machine, for example you run the web server, Coldfusion Server and studio on the one machine. I don't do it this way, as I find it easier to have a seperate machine for developing and a seperate for my server. I am wondering if this might be a solution if you had the resource to proved a seperate machine. It couldn't hurt, because if you are it could be a case of too much memory being taken up from the machine's normal resources. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Kear Sent: Monday, 19 June 2000 10:28 AM To: [EMAIL PROTECTED] Subject: RE: studio errors Well thanks for that Andrew - it means that it IS POSSIBLE that at the end of this saga that's now been going for more than 2 months, I might have a Studio that works. it **IS** possible the thing is going to be usable. It's running in Windows98 64MB and I've tried it in Windows95/48MB But on the plus side, I'm pleased to report that after all this time Allaire's support has finally woken up and offered a suggestion. Perhaps I have two web servers running. (I don't). Not much progress, but it **IS** progress. Andrew thanks for your suggestion and for giving me the confidence to continue. I was starting to think I'm better just to cut my losses, throw a A$1000 program away and suggest my clients buy another program. I was not looking forward to telling them they have to throw out that amount of money. Cheers, Mike Kear AFP Web Development Webmaster, Australian Consumers Association Windsor, NSW, Australia -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: studio errors
Yes, I have two development machines I'm trying to work with, and a production server that's working CFServer4.0.1 just fine. I'm reluctant to upgrade the server to 4.5.1 until I see it working in my development first, to see if there are any conflicts with my existing templates. The development machines are totally stand-alone. Our firewall doesnt allow access to the server so they're not even networked to each other. Just PCs connected in one case to a ISDN line and in the other case to a modem. No other apps on the PCs, except what you'd normally expect to find on a PC - Office, Dreamweaver3, Fireworks3, Ultra Edit, Linkbot, CuteFTP, SQLServer7 (yes I know its inefficient on a PC but it's the only way to reproduce the server on the development environment) Cheers, Mike Kear On Mon, 19 Jun 2000, Andrew Scott wrote: Yeah I could see how that could be frustrating, but there are problems with the latest studio. But they are only little anoying bugs with a work around. Nothing like you were describing. Can I ask does you environment only have the one machine, for example you run the web server, Coldfusion Server and studio on the one machine. I don't do it this way, as I find it easier to have a seperate machine for developing and a seperate for my server. I am wondering if this might be a solution if you had the resource to proved a seperate machine. It couldn't hurt, because if you are it could be a case of too much memory being taken up from the machine's normal resources. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Kear Sent: Monday, 19 June 2000 10:28 AM To: [EMAIL PROTECTED] Subject: RE: studio errors Well thanks for that Andrew - it means that it IS POSSIBLE that at the end of this saga that's now been going for more than 2 months, I might have a Studio that works. it **IS** possible the thing is going to be usable. It's running in Windows98 64MB and I've tried it in Windows95/48MB But on the plus side, I'm pleased to report that after all this time Allaire's support has finally woken up and offered a suggestion. Perhaps I have two web servers running. (I don't). Not much progress, but it **IS** progress. Andrew thanks for your suggestion and for giving me the confidence to continue. I was starting to think I'm better just to cut my losses, throw a A$1000 program away and suggest my clients buy another program. I was not looking forward to telling them they have to throw out that amount of money. Cheers, Mike Kear AFP Web Development Webmaster, Australian Consumers Association Windsor, NSW, Australia -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: CFIF syntax debate (kind of...)
Thanks Sean! - Original Message - From: "Sean Renet" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 7:17 PM Subject: Re: CFIF syntax debate (kind of...) There is also the Caller scope coming from a tag. Of course all of this is a bit easier if you go to http://www.fusebox.org/files/formurl2attributes.zip and get the Then you doen't really have to worry about form and url scopes as they will always be attribute scopes. Changing these variables to attributes scope makes it much easier to CFMODULE to another application. While you are picking up that tag you might want to read up on the fusebox methodology (http://www.fusebox.org/index.cfm?fuseaction=Spec). Fusebox is a nice way to keep your code clean. And if you are just starting out there are some nice tutorials also. - Original Message - From: "Todd Mathews" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 2:27 PM Subject: Re: CFIF syntax debate (kind of...) At 03:42 PM 6/18/2000 -0400, you wrote: what kind of scopes are there? Form, url, session... anything else? Where can I get more information about doing my code with the proper syntax? I looked through the Ben Forta CF book and it does not mention this... There are also application and client scopes as well. Which Forta book do you have? The CF docs also have a fair amount of info covering these but it is spread out so you will have to dig around a bit. Todd -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: CFIF syntax debate (kind of...)
Todd, The book I have is "The ColdFusion Web application construction kit 4.0". When you say the CF docs do you mean the ones that come with CF server or studio? thanks - Original Message - From: "Todd Mathews" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 5:27 PM Subject: Re: CFIF syntax debate (kind of...) At 03:42 PM 6/18/2000 -0400, you wrote: what kind of scopes are there? Form, url, session... anything else? Where can I get more information about doing my code with the proper syntax? I looked through the Ben Forta CF book and it does not mention this... There are also application and client scopes as well. Which Forta book do you have? The CF docs also have a fair amount of info covering these but it is spread out so you will have to dig around a bit. Todd -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Backwards and forwards
Not sure if this made it to the list last week with the list having some dramas so her it is again - apologies if its already hit the mark with some of you. +++ Can someone give little bit of advice here please? We are going to release our Corporate Plan on those little CD cards this year. On the CD will be a web version of our Corporate Plan. In it will be links back to our web site. We think it would be pretty useful if we had an idea how many times the cards were used to link to our web site. There are 2 options. I can create a phantom version of each page that is linked to from the CD card e.g. if the link is to index.html then we create a duplicate of that page e.g. index_2.html and use that for the card link. Then we can trawl our web stats and do a count of how many hits on index_2.html. This is simple but there is a maintenance overhead as we have about 10 to 15 links in the plan i.e. each time we regenerate the site we have to create the phantom pages again. It also means we are locked into a certain site structure of a while. The CF option is to place a CF page between the CD and the target page that increments or adds a value in a database and uses CFLOCATION to move them to the target page (our main web site is not am CF server FYI). (This option allows us to change site structure - when it does we simply change the value of the url in CFLOCATION). The problem I've encountered with this one is when the user hits the back button they will be directed back to the CF page from whence they came and then encounter the CFLOCATION bit that loops them to where they came from - not the desired result. H! I could put some JavaScript in to manipulate history but the problem there is what happens when they hit the back button when they come to the page from within the web site itself, not via the card. Any clues please? Kevin Parker Service and Communication WorkCover Corporation [EMAIL PROTECTED] ph: +61 8 82332548 fax: +61 8 82332000 This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender cannot warrant that this e-mail or any files transmitted with it are free of viruses or any other defect. If you have received this e-mail in error, please notify the sender immediately by return e-mail and destroy the original e-mail and any copies. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Backwards and forwards
kevin, :~~ : From: Parker, Kevin [EMAIL PROTECTED] : : The problem I've encountered with this one is when the : user hits the back button they will be directed back to the : CF page from whence they came and then encounter the : CFLOCATION bit that loops them to where they came from : - not the desired result. :~~ there have got to be other factors at stake that are causing the problem you describe above. since a cflocation is essentially a server-side redirect, the page containing the cflocation would never even be entered into the user's history therefore making it impossible to get to with the back button. what you're describing sounds more like a javascript redirect using location.href or a meta refresh with a delay. my suggestion . . . point the links to a template with a cflocation and call it a day. good luck, .jeff name://jeff.howden game://web.development http://www.evolt.org/ mailto:[EMAIL PROTECTED] -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Test
Test? -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Test
Say it with more authority! - Original Message - From: "Phil Labonte" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 8:27 PM Subject: Test Test? -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=li sts/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Backwards and forwards
why don't you just assign a variable to the link you are going to include on your cd and then on your main home page use some conditional logic to test to see if that variable exists, if it does then do an insert into your DB then you can track who's coming from he cd. just my 2 cents :-) - Original Message - From: "Parker, Kevin" [EMAIL PROTECTED] To: "CF Talk (E-mail)" [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 9:15 PM Subject: Backwards and forwards Not sure if this made it to the list last week with the list having some dramas so her it is again - apologies if its already hit the mark with some of you. +++ Can someone give little bit of advice here please? We are going to release our Corporate Plan on those little CD cards this year. On the CD will be a web version of our Corporate Plan. In it will be links back to our web site. We think it would be pretty useful if we had an idea how many times the cards were used to link to our web site. There are 2 options. I can create a phantom version of each page that is linked to from the CD card e.g. if the link is to index.html then we create a duplicate of that page e.g. index_2.html and use that for the card link. Then we can trawl our web stats and do a count of how many hits on index_2.html. This is simple but there is a maintenance overhead as we have about 10 to 15 links in the plan i.e. each time we regenerate the site we have to create the phantom pages again. It also means we are locked into a certain site structure of a while. The CF option is to place a CF page between the CD and the target page that increments or adds a value in a database and uses CFLOCATION to move them to the target page (our main web site is not am CF server FYI). (This option allows us to change site structure - when it does we simply change the value of the url in CFLOCATION). The problem I've encountered with this one is when the user hits the back button they will be directed back to the CF page from whence they came and then encounter the CFLOCATION bit that loops them to where they came from - not the desired result. H! I could put some JavaScript in to manipulate history but the problem there is what happens when they hit the back button when they come to the page from within the web site itself, not via the card. Any clues please? Kevin Parker Service and Communication WorkCover Corporation [EMAIL PROTECTED] ph: +61 8 82332548 fax: +61 8 82332000 This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender cannot warrant that this e-mail or any files transmitted with it are free of viruses or any other defect. If you have received this e-mail in error, please notify the sender immediately by return e-mail and destroy the original e-mail and any copies. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Test
I will! Thanks! I received an email from cftalk request a confirmation to be added to the list but I am already on it. I wanted to send a message to see if I was removed. Thanks! - Original Message - From: "Fred T. Sanders" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 9:30 PM Subject: Re: Test Say it with more authority! - Original Message - From: "Phil Labonte" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 8:27 PM Subject: Test Test? -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=li sts/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Backwards and forwards
Thanks Ben - our main site is not on a CF server otherwise it would be easy. Kevin Parker Service and Communication WorkCover Corporation [EMAIL PROTECTED] ph: +61 8 82332548 fax: +61 8 82332000 -Original Message- From: Ben Densmore [mailto:[EMAIL PROTECTED]] Sent: Monday, 19 June 2000 11:01:AM To: [EMAIL PROTECTED] Subject: Re: Backwards and forwards why don't you just assign a variable to the link you are going to include on your cd and then on your main home page use some conditional logic to test to see if that variable exists, if it does then do an insert into your DB then you can track who's coming from he cd. just my 2 cents :-) - Original Message - From: "Parker, Kevin" [EMAIL PROTECTED] To: "CF Talk (E-mail)" [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 9:15 PM Subject: Backwards and forwards Not sure if this made it to the list last week with the list having some dramas so her it is again - apologies if its already hit the mark with some of you. +++ Can someone give little bit of advice here please? We are going to release our Corporate Plan on those little CD cards this year. On the CD will be a web version of our Corporate Plan. In it will be links back to our web site. We think it would be pretty useful if we had an idea how many times the cards were used to link to our web site. There are 2 options. I can create a phantom version of each page that is linked to from the CD card e.g. if the link is to index.html then we create a duplicate of that page e.g. index_2.html and use that for the card link. Then we can trawl our web stats and do a count of how many hits on index_2.html. This is simple but there is a maintenance overhead as we have about 10 to 15 links in the plan i.e. each time we regenerate the site we have to create the phantom pages again. It also means we are locked into a certain site structure of a while. The CF option is to place a CF page between the CD and the target page that increments or adds a value in a database and uses CFLOCATION to move them to the target page (our main web site is not am CF server FYI). (This option allows us to change site structure - when it does we simply change the value of the url in CFLOCATION). The problem I've encountered with this one is when the user hits the back button they will be directed back to the CF page from whence they came and then encounter the CFLOCATION bit that loops them to where they came from - not the desired result. H! I could put some JavaScript in to manipulate history but the problem there is what happens when they hit the back button when they come to the page from within the web site itself, not via the card. Any clues please? Kevin Parker Service and Communication WorkCover Corporation [EMAIL PROTECTED] ph: +61 8 82332548 fax: +61 8 82332000 This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender cannot warrant that this e-mail or any files transmitted with it are free of viruses or any other defect. If you have received this e-mail in error, please notify the sender immediately by return e-mail and destroy the original e-mail and any copies. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. This e-mail is intended for the use of the addressee only. It may contain information that is protected by legislated confidentiality and/or is legally privileged. If you are not the intended recipient you are prohibited from disseminating, distributing or copying this e-mail. Any opinion expressed in this e-mail may not necessarily be that of the WorkCover Corporation of South Australia. Although precautions have been taken, the sender
Quickstore
I know this is basic, but I am attempting to build a store using the Quickstore code from the Cold Fusion Web Application (by Ben Forta) and can't seem to get it to work properly. Is anyone familiar with this or any of the challenges related to this cart? -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: CFIF syntax debate (kind of...)
hehe - I forgot about that caller. wascal :) -Original Message- From: Sean Renet [mailto:[EMAIL PROTECTED]] Sent: Sunday, June 18, 2000 7:17 PM To: [EMAIL PROTECTED] Subject: Re: CFIF syntax debate (kind of...) There is also the Caller scope coming from a tag. Of course all of this is a bit easier if you go to http://www.fusebox.org/files/formurl2attributes.zip and get the Then you doen't really have to worry about form and url scopes as they will always be attribute scopes. Changing these variables to attributes scope makes it much easier to CFMODULE to another application. While you are picking up that tag you might want to read up on the fusebox methodology (http://www.fusebox.org/index.cfm?fuseaction=Spec). Fusebox is a nice way to keep your code clean. And if you are just starting out there are some nice tutorials also. - Original Message - From: "Todd Mathews" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, June 18, 2000 2:27 PM Subject: Re: CFIF syntax debate (kind of...) At 03:42 PM 6/18/2000 -0400, you wrote: what kind of scopes are there? Form, url, session... anything else? Where can I get more information about doing my code with the proper syntax? I looked through the Ben Forta CF book and it does not mention this... There are also application and client scopes as well. Which Forta book do you have? The CF docs also have a fair amount of info covering these but it is spread out so you will have to dig around a bit. Todd -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: REGEX validating email
Chris,
Way back in the beginning of April you posted the following regexp to the
CF-Talk as a regexp that can be used to check whether or not a string is a
properly formatted email address.
Here's the code I use
CFSET IsEmail =
REFind("^([[:alnum:]][-a-zA-Z0-9_%\.]*)?[[:alnum:]]@[[:alnum:]][-a-zA-Z0-9%\
.]*.[[:alpha:]]{2,}$", email)
I liked your regexp so much more than my long, drawn out method so I cut and
pasted your code into my templates and went about my business. Well, I just
discovered that the above regexp has a flaw. My regexp skills aren't quite
as sharp as they should be, so I haven't had the best of luck figuring out
the problem on my own.
The problem I have is that this regexp returns true on a string containing
some alpha numeric characters, the "@", and then 4 more characters EXCLUDING
a period. For example, if I pass "seth@argo" to the regexp it returns true,
signifying that the string is in fact a valid email address. If there are
three or less characters after the "@" then it correctly returns false. The
logic of the regexp SEEMS correct to me, and I can't seem to figure out why
this is happening. I've double checked my code 4 times, and I have EXACTLY
what you posted to the list.
Could you please check and make sure that this is indeed the regexp that you
use (i.e. make sure there are no typos). If it is NOT could you be so kind
as to send me the correct one? If this IS what you are using then you might
want to check and see if your sites suffer from the same error.
Finally, one last and final question: the only character in your regexp
that I don't understand is the "$" at the very end. I can't find an
explanation of this meta character anywhere in Forta's section on regular
expressions. What exactly does this character do?
Regards,
Seth Petry-Johnson
Argo Enterprise and Associates
--
Archives: http://www.eGroups.com/list/cf-talk
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Cisco Local Director other load balancing hardware
This is a multi-part message in MIME format. --=_NextPart_000_0025_01BFD9E9.DC579D40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi everyone, I'm trying to get some information re Cisco's Local Director - How much = does it cost? Also, are there any other products out there that can = integrate with Cluster Cats and Cold Fusion in the same way? Thanks much, J --=_NextPart_000_0025_01BFD9E9.DC579D40 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable !DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" HTMLHEAD META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type META content=3D"MSHTML 5.00.3017.1000" name=3DGENERATOR STYLE/STYLE /HEAD BODY bgColor=3D#ff DIVFONT face=3DArial size=3D2 DIVFONT face=3DArial size=3D2Hi everyone,/FONT/DIV DIVnbsp;/DIV DIVFONT face=3DArial size=3D2I'm trying to get some information re = Cisco's Local=20 Director - How much does it cost? Also, are there any other products out = there=20 that can integrate with Cluster Cats and Cold Fusion in the same=20 way?/FONT/DIV DIVnbsp;/DIV DIVFONT face=3DArial size=3D2Thanks much,/FONT/DIV DIVnbsp;/DIV DIVFONT face=3DArial = size=3D2J/FONT/DIV/FONT/DIV/BODY/HTML --=_NextPart_000_0025_01BFD9E9.DC579D40-- __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Webmaster for webmaster.aol.com
Ok I know the issue for compatibility with AOL and ColdFusion always comes up and I have put as many things that have been recommended in there as I can. Here is my question I wish to pose to the webmaster for the domain name mentioned. Why does AOL not cache .asp pages and .cgi pages but will cache .cfm pages, ColdFusion has been out longer than .asp and the site you list all of this info on is even written in ColdFusion. Do you not have any say in what gets cached. There is no where else for me to write to because the page doesn't have an email address for the webmaster, so please excuse me for anyone reading this. I am just frustrated to no end. I try to make an awesome application and now it gets all screwed up because aol likes .asp better. Anyone who has some input please respond. Bob Everland -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Webmaster for webmaster.aol.com
Don't hold your breath on getting a response from AOL. Even when they used to respond, the context of the response was essentially, "tough luck, it's your problem." To prevent AOL from caching your pages, place the following statements in your application.cfm page: CFSET gmt = gettimezoneinfo() CFSET gmt = gmt.utcHourOffset CFIF gmt EQ 0 CFSET gmt = "" CFELSEIF gmt GT 0 CFSET gmt = "+" gmt /CFIF CFHEADER NAME="Pragma" VALUE="no-cache" CFHEADER NAME="Cache-Control" VALUE="no-cache, must-revalidate" CFHEADER NAME="Last-Modified" VALUE="#dateformat(now(), 'ddd, dd mmm ')# #timeformat(now(), 'HH:mm:ss')# GMT#gmt#" CFHEADER NAME="Expires" VALUE="Mon, 26 Jul 1997 05:00:00 GMT" Michael J. Sheldon Internet Applications Developer Phone: 480.699.1084 http://www.desertraven.com/ PGP Key Available on Request -Original Message- From: Robert Everland III [mailto:[EMAIL PROTECTED]] Sent: Sunday, June 18, 2000 21:42 To: [EMAIL PROTECTED] Subject: Webmaster for webmaster.aol.com Ok I know the issue for compatibility with AOL and ColdFusion always comes up and I have put as many things that have been recommended in there as I can. Here is my question I wish to pose to the webmaster for the domain name mentioned. Why does AOL not cache .asp pages and .cgi pages but will cache .cfm pages, ColdFusion has been out longer than .asp and the site you list all of this info on is even written in ColdFusion. Do you not have any say in what gets cached. There is no where else for me to write to because the page doesn't have an email address for the webmaster, so please excuse me for anyone reading this. I am just frustrated to no end. I try to make an awesome application and now it gets all screwed up because aol likes .asp better. Anyone who has some input please respond. Bob Everland -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
RE: Quickstore
Hai It work if u change just bit of code like modifying the query. I mean that u remove order by clause in the query.And he specified columnnames with quotes in the query. So just remove the quotes. Ya for me also i face same problem. but after chnagng the code then it is working fine. -Original Message- From: Jay Sener, CPCM [mailto:[EMAIL PROTECTED]] Sent: Monday, June 19, 2000 10:07 AM To: [EMAIL PROTECTED] Subject: Quickstore I know this is basic, but I am attempting to build a store using the Quickstore code from the Cold Fusion Web Application (by Ben Forta) and can't seem to get it to work properly. Is anyone familiar with this or any of the challenges related to this cart? -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
Re: Webmaster for webmaster.aol.com
I know this is going to sound like I am Satan's helper, but think of who you are dealing with Bob. You are trying to get results from a company that instead of innovating and keeping thier browsers (both inherent aol and netscape) updated, they decided to sue microsoft . The same attitude that allowed IE to surpass netscape seems alive and well in alot of other areas of AOL. Last year I started the process to buy the music realistate and found them technologically sluggish. There have to be hundreds of asp, c, java and perl developers working there that do not want to or do not have the time to learn a new skill set. CF may be old for us, but its new to them. They are going through massive re-structuring and other app server communities like Broadvision et al want their attention also. So, I doubt you are going to see much change from them for some time to come. AOL is a huge corporation and I have not seen innovation there since AIM. Who knows, maybe the change to not caching cfm pages would take hunders of man hours in assembly code on their double top secret proprietary servers. I suppose when you add pioneers like Ted Turner and WEA's Roger Aames to the mix, progression will eventually come. On the bright side of things, China and North Korea look like PC, non-AOL markets to me. -- Archives: http://www.eGroups.com/list/cf-talk To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=listsbody=lists/cf_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
