Re: Absolute Path Usage
I did ask them to set up CFMappings for me and they did. My comments about they wouldn't set up mappings was focused on them setting up a / mapping. That would not be possible on a shared CF server. Anyway I had them set up some custom (for me) mappings and they work beautifully! Thanks to all for your help! Bruce Holm - Original Message - From: Owens, Howard [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 10:04 AM Subject: RE: Absolute Path Usage If I was hosting with a company (and I've worked with many shared hosts and I use mappings on all my applications) that wouldn't set up a CFMapping for me -- I'd change hosts. There's no reason not to set up mappings for you. H. Howard Owens Internet Operations Coordinator www.insidevc.com [EMAIL PROTECTED] AIM: GoCatGo1956 -Original Message- From: Bruce Holm [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:16 AM To: CF-Talk Subject: Re: Absolute Path Usage My hosting company controls the CF Server administration mapping. SInce they share the CF server with many other website domains, they won't be creating mappings like / to my web root. If my domain was the only one on their server (dedicated server) then I could have them do this. Thanks for responding. Bruce - Original Message - From: Chad Gray [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 8:52 AM Subject: Re: Absolute Path Usage Im jumping into the middle also, but have to tried adding a mapping in the CFadministrator? I had to use a path for some CFCINCLUDES that went 3 or 4 folders deep, and it works great! At 08:51 AM 9/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. Bruce ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Relative paths are recommended, if more for portability that anything else. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
What I am wanting is a relative path but relative to the web root...for portability. I have an include file that I want to include by specifying the same path every time in all files in the hierarchy. So I put this include file in /global directory and want to reference it by /global/foo.cfm, which if it worked, would be the same include line in all files in my web site. But this path does not work for includes. I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. The only workaround I can think of is create some code that looks at the absolute template location and calculate what level the template is in and set the relative path accordingly... not very idea. Or just hard code the include path in each file on a file by file basis. Bruce - Original Message - From: Peter Tilbrook [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 5:10 AM Subject: RE: Absolute Path Usage Relative paths are recommended, if more for portability that anything else. ~~ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
I didn't see the original post, so I'm jumping in the middle. At 08:15 AM 09/25/2001 -0700, you wrote: What I am wanting is a relative path but relative to the web root...for portability. I have an include file that I want to include by specifying the same path every time in all files in the hierarchy. So I put this include file in /global directory and want to reference it by /global/foo.cfm, which if it worked, would be the same include line in all files in my web site. But this path does not work for includes. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. -- Jeffry Houser | mailto:[EMAIL PROTECTED] AIM: Reboog711 | ICQ: 5246969 | Fax / Phone: 860-223-7946 -- I'm looking for a room-mate in the Hartford CT area, starting in October -- DotComIt: Database Driven Web Data My Book: Instant ColdFusion 5.0 | http://www.instantcoldfusion.com -- Far Cry Fly, Alternative Folk Rock http://www.farcryfly.com | http://www.mp3.com/FarCryFly -- A friend is someone who knows how to spell your name. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. Bruce ~~ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
Im jumping into the middle also, but have to tried adding a mapping in the CFadministrator? I had to use a path for some CFCINCLUDES that went 3 or 4 folders deep, and it works great! At 08:51 AM 9/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. Bruce ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
My hosting company controls the CF Server administration mapping. SInce they share the CF server with many other website domains, they won't be creating mappings like / to my web root. If my domain was the only one on their server (dedicated server) then I could have them do this. Thanks for responding. Bruce - Original Message - From: Chad Gray [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 8:52 AM Subject: Re: Absolute Path Usage Im jumping into the middle also, but have to tried adding a mapping in the CFadministrator? I had to use a path for some CFCINCLUDES that went 3 or 4 folders deep, and it works great! At 08:51 AM 9/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. Bruce ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
At 08:51 AM 09/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have grown quite fond of this technique, although I haven't found a way of dealing with multiple Application.cfms that I'm completely happy with. I would either break off the pertinent application.cfm lines into a separate include and include them into all the Application.cfms or do something like this: CFINCLUDE ../application.cfm CFSET dirlevel = ../ I haven't decided which way is 'better' or 'worse' . I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. That's good to know, since I'm pretty stuck to the 'dirlevel' theory I've never experienced it. -- Jeffry Houser | mailto:[EMAIL PROTECTED] AIM: Reboog711 | ICQ: 5246969 | Fax / Phone: 860-223-7946 -- I'm looking for a room-mate in the Hartford CT area, starting in October -- DotComIt: Database Driven Web Data My Book: Instant ColdFusion 5.0 | http://www.instantcoldfusion.com -- Far Cry Fly, Alternative Folk Rock http://www.farcryfly.com | http://www.mp3.com/FarCryFly -- A friend is someone who knows how to spell your name. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
If you were to use fusebox style methodology, you would put those variables in app_locals.cfm. It's already been stated that mappings are not the answer, but that's what I use - much cleaner. -Original Message- From: Jeffry Houser [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 3:18 PM To: CF-Talk Subject: Re: Absolute Path Usage At 08:51 AM 09/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have grown quite fond of this technique, although I haven't found a way of dealing with multiple Application.cfms that I'm completely happy with. I would either break off the pertinent application.cfm lines into a separate include and include them into all the Application.cfms or do something like this: CFINCLUDE ../application.cfm CFSET dirlevel = ../ I haven't decided which way is 'better' or 'worse' . I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. That's good to know, since I'm pretty stuck to the 'dirlevel' theory I've never experienced it. -- Jeffry Houser | mailto:[EMAIL PROTECTED] AIM: Reboog711 | ICQ: 5246969 | Fax / Phone: 860-223-7946 -- I'm looking for a room-mate in the Hartford CT area, starting in October -- DotComIt: Database Driven Web Data My Book: Instant ColdFusion 5.0 | http://www.instantcoldfusion.com -- Far Cry Fly, Alternative Folk Rock http://www.farcryfly.com | http://www.mp3.com/FarCryFly -- A friend is someone who knows how to spell your name. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
If I was hosting with a company (and I've worked with many shared hosts and I use mappings on all my applications) that wouldn't set up a CFMapping for me -- I'd change hosts. There's no reason not to set up mappings for you. H. Howard Owens Internet Operations Coordinator www.insidevc.com [EMAIL PROTECTED] AIM: GoCatGo1956 -Original Message- From: Bruce Holm [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:16 AM To: CF-Talk Subject: Re: Absolute Path Usage My hosting company controls the CF Server administration mapping. SInce they share the CF server with many other website domains, they won't be creating mappings like / to my web root. If my domain was the only one on their server (dedicated server) then I could have them do this. Thanks for responding. Bruce - Original Message - From: Chad Gray [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 8:52 AM Subject: Re: Absolute Path Usage Im jumping into the middle also, but have to tried adding a mapping in the CFadministrator? I had to use a path for some CFCINCLUDES that went 3 or 4 folders deep, and it works great! At 08:51 AM 9/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. Bruce ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
Howard said: they won't be creating mappings like / to my web root that doesn't necessarily mean they won't set up a mapping for you, but they cannot set up a / mapping as that is already used by CF for the default root ask them to setup a mapping for /somename that points to where you want it, then you can use cfinclude template = /somename/templatename.cfm ~~ Stephenie Hamilton - Original Message - From: Owens, Howard [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 1:04 PM Subject: RE: Absolute Path Usage If I was hosting with a company (and I've worked with many shared hosts and I use mappings on all my applications) that wouldn't set up a CFMapping for me -- I'd change hosts. There's no reason not to set up mappings for you. H. Howard Owens Internet Operations Coordinator www.insidevc.com [EMAIL PROTECTED] AIM: GoCatGo1956 -Original Message- From: Bruce Holm [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:16 AM To: CF-Talk Subject: Re: Absolute Path Usage My hosting company controls the CF Server administration mapping. SInce they share the CF server with many other website domains, they won't be creating mappings like / to my web root. If my domain was the only one on their server (dedicated server) then I could have them do this. Thanks for responding. Bruce - Original Message - From: Chad Gray [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 8:52 AM Subject: Re: Absolute Path Usage Im jumping into the middle also, but have to tried adding a mapping in the CFadministrator? I had to use a path for some CFCINCLUDES that went 3 or 4 folders deep, and it works great! At 08:51 AM 9/25/2001 -0700, you wrote: See below... - Original Message - From: Jeffry Houser [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:30 AM Subject: Re: Absolute Path Usage I didn't see the original post, so I'm jumping in the middle. .. The way I do this is by setting a variable ( Either to the local scope or the request scope ) in the application.cfm called DirLevel: Root: Dirlevel = Sub1Direvel = ../ SubSub1:Dirlevel = ../../ Sub2Dirlevel = ../ When you create your include, make all the paths relative to the root directory and add dirlevel in there. A HREF=#dirlevel#index.cfmHome/A A HREF=#dirlevel#sub1/page1.cfmPage 1/A etc.. etc.. This makes it easy, and I do it all the time. One potential problem is that you'll need different application.cfm for each directory. This technique may be useful in some cases, although I'm not sure that it's worth it. I'll probably just stick to hardcoding the ../../ etc levels in each CFINCLUDE statement. Thanks for the tip! I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. You can always get to the exact root directory (I.E. www.mysite.com/ ) by using the slash. So the code I wrote above could easily be re-written like: A HREF=/index.cfmHome/A A HREF=/sub1/page1.cfmPage 1/A And the browser sees the '/' and automatically adds it to the end of the url, such as www.mysite.com/index.cfm for the first link. Try it; It works. However, if the root directory of your application is not the root directory of your server, that won't work. It may work for A HREF but not for CFINCLUDE template= tag. That is the whole point of my discussion. CFINCLUDE is very picky...it appears it ONLY sees relative paths or paths specified in the server mapping file. That's IT! How I wish it recognized / as the web root, meaning the placeholder or representative location for http://www.mydomain.com/. Bruce ~~ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
cfinclude can only take relative paths. To get around this issue with my templates, I used CFHTTP to read the file in question (page header and menu), then dump the resulting text to my page in the appropriate locations. This is nice because CFHTTP uses absolute paths, and saves me the hassle of remembering to set all my include files correctly, and leaves me free to add directory levels and still have my header/menu display as I expected, with no changes. Hope this helps. Shawn Grover -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:16 AM To: CF-Talk Subject: Re: Absolute Path Usage What I am wanting is a relative path but relative to the web root...for portability. I have an include file that I want to include by specifying the same path every time in all files in the hierarchy. So I put this include file in /global directory and want to reference it by /global/foo.cfm, which if it worked, would be the same include line in all files in my web site. But this path does not work for includes. I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. The only workaround I can think of is create some code that looks at the absolute template location and calculate what level the template is in and set the relative path accordingly... not very idea. Or just hard code the include path in each file on a file by file basis. Bruce - Original Message - From: Peter Tilbrook [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 5:10 AM Subject: RE: Absolute Path Usage Relative paths are recommended, if more for portability that anything else. ~~ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Aren't there efficiency considerations for using CFHTTP? I don't think choosing a solution because Then I don't have to code correctly is a good reasoning. At 12:51 PM 09/25/2001 -0600, you wrote: cfinclude can only take relative paths. To get around this issue with my templates, I used CFHTTP to read the file in question (page header and menu), then dump the resulting text to my page in the appropriate locations. This is nice because CFHTTP uses absolute paths, and saves me the hassle of remembering to set all my include files correctly, and leaves me free to add directory levels and still have my header/menu display as I expected, with no changes. Hope this helps. Shawn Grover -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:16 AM To: CF-Talk Subject: Re: Absolute Path Usage What I am wanting is a relative path but relative to the web root...for portability. I have an include file that I want to include by specifying the same path every time in all files in the hierarchy. So I put this include file in /global directory and want to reference it by /global/foo.cfm, which if it worked, would be the same include line in all files in my web site. But this path does not work for includes. I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. The only workaround I can think of is create some code that looks at the absolute template location and calculate what level the template is in and set the relative path accordingly... not very idea. Or just hard code the include path in each file on a file by file basis. Bruce - Original Message - From: Peter Tilbrook [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 5:10 AM Subject: RE: Absolute Path Usage Relative paths are recommended, if more for portability that anything else. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
cfinclude can only take relative paths. This isn't correct. You can use relative paths and absolute paths defined within the CF Administrator with CFINCLUDE. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ voice: (202) 797-5496 ~~ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Not true. Use cf admin to set up your mappings. Mark -Original Message- From: Shawn Grover [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 2:52 PM To: CF-Talk Subject: RE: Absolute Path Usage cfinclude can only take relative paths. To get around this issue with my templates, I used CFHTTP to read the file in question (page header and menu), then dump the resulting text to my page in the appropriate locations. This is nice because CFHTTP uses absolute paths, and saves me the hassle of remembering to set all my include files correctly, and leaves me free to add directory levels and still have my header/menu display as I expected, with no changes. Hope this helps. Shawn Grover -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:16 AM To: CF-Talk Subject: Re: Absolute Path Usage What I am wanting is a relative path but relative to the web root...for portability. I have an include file that I want to include by specifying the same path every time in all files in the hierarchy. So I put this include file in /global directory and want to reference it by /global/foo.cfm, which if it worked, would be the same include line in all files in my web site. But this path does not work for includes. I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. The only workaround I can think of is create some code that looks at the absolute template location and calculate what level the template is in and set the relative path accordingly... not very idea. Or just hard code the include path in each file on a file by file basis. Bruce - Original Message - From: Peter Tilbrook [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 5:10 AM Subject: RE: Absolute Path Usage Relative paths are recommended, if more for portability that anything else. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Hi, Not trying to argue the point, but in my experience most ISP's will create a mapping for you even in a shared environment, just not a totally generic one like / because it is already in use by the CF Server. Besides you don't need a mapping to your web root you need a mapping to an include directory... Well you could put all your includes in your root, but that is just messy :]. Basically you need to put your include.cfms in a directory... Call the directory whatever you want i.e. includes. Have your ISP set up a mapping like: Logical Path: /yourdomainname/ Directory Path: C:\Inetpub\wwwroot\yourdomain\includes (or whatever your directory path is... You tell them the directory you need mapped and they handle the rest.) Then you call your includes like this: cfinclude template=/yourdomainname/include.cfm If they won't do this, I would change hosts. There is no reason they shouldn't be able to create mappings for their clients. HTH, Mike -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 12:16 PM To: CF-Talk Subject: Re: Absolute Path Usage My hosting company controls the CF Server administration mapping. SInce they share the CF server with many other website domains, they won't be creating mappings like / to my web root. ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
Re: Absolute Path Usage
Hi Shawn, Would you be willing to post or send me directly a small example of this method? Thanks Bruce - Original Message - From: Shawn Grover [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:51 AM Subject: RE: Absolute Path Usage cfinclude can only take relative paths. To get around this issue with my templates, I used CFHTTP to read the file in question (page header and menu), then dump the resulting text to my page in the appropriate locations. This is nice because CFHTTP uses absolute paths, and saves me the hassle of remembering to set all my include files correctly, and leaves me free to add directory levels and still have my header/menu display as I expected, with no changes. Hope this helps. Shawn Grover ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Ya.. I would like to see this as well. TIA! Mike -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 4:50 PM To: CF-Talk Subject: Re: Absolute Path Usage Hi Shawn, Would you be willing to post or send me directly a small example of this method? Thanks Bruce ~~ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Well, I posted this once, about 2 hours ago, and still don't see it online, so here it is again... Here's some snippets of code that show how to use CFHTTP to get include files. Not saying this is the best method out there, but it works well for my purposes. (at one point we were using a graphic place holder for the navigation tree, hence the reason for capturing/checking the mime type of the navigation file.) cfset sFooterFile = #App.FooterFile# cfset sHeaderFile = #App.HeaderFile# cfset sNavFile = #App.Navigation#?Access=#Session.Security# cfset txtFooter = cfset txtHeader = cfset txtNav = !--- Get the header file --- cfhttp url=#sHeaderFile# method=GET resolveurl=true/cfhttp cfif FindNoCase(200,CFHTTP.StatusCode) gt 0 cfset txtHeader = cfhttp.filecontent cfelse cfset txtHeader = The request for the header file returned a code other than OK.brThe code returned was: br#CFHTTP.StatusCode# /cfif !--- Get the Footer file --- cfhttp url=#sFooterFile# method=GET resolveurl=true/cfhttp cfif FindNoCase(200,CFHTTP.StatusCode) gt 0 cfset txtFooter = cfhttp.filecontent cfelse cfset txtFooter = The request for the Footer file returned a code other than OK.brThe code returned was: br#CFHTTP.StatusCode# /cfif !--- Get the navigation file --- cfhttp url=#sNavFile# method=GET resolveurl=true/cfhttp cfif FindNoCase(200,CFHTTP.StatusCode) gt 0 cfset txtNav = cfhttp.filecontent cfset txtNavMime = cfhttp.MimeType cfelse cfset txtNav = The request for the Navigation file returned a code other than OK.brThe code returned was: br#CFHTTP.StatusCode# cfset txtNavMime=Unknown /cfif !--- SNIP --- !DOCTYPE HTML PUBLIC -//W3C//DTD HTML 4.0 Transitional//EN html head titleSample Page/title /head body bgcolor=ff !--- Page Layout --- table border=0 cellpadding=0 cellspacing=0 width=100% cfoutputtr bgcolor=#App.CorpColor#/cfoutput td colspan=3 width=100% !--- Page Header --- cfoutput#txtHeader#/cfoutput /td /tr tr cfoutputtd bgcolor=#App.CorpColor# width=150nbsp;/td/cfoutput td width=5nbsp;/td td width=645nbsp;/td /tr tr cfoutputtd bgcolor=#App.CorpColor# width=100 valign=top/cfoutput !--- Navigation --- cfif findNoCase(image, txtNavMime) gt 0 cfoutputimg src=#sNavFile# border=0/cfoutput cfelse cfoutput#txtNav#/cfoutput /cfif /td !--- SNIP --- -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 2:50 PM To: CF-Talk Subject: Re: Absolute Path Usage Hi Shawn, Would you be willing to post or send me directly a small example of this method? Thanks Bruce - Original Message - From: Shawn Grover [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 11:51 AM Subject: RE: Absolute Path Usage cfinclude can only take relative paths. To get around this issue with my templates, I used CFHTTP to read the file in question (page header and menu), then dump the resulting text to my page in the appropriate locations. This is nice because CFHTTP uses absolute paths, and saves me the hassle of remembering to set all my include files correctly, and leaves me free to add directory levels and still have my header/menu display as I expected, with no changes. Hope this helps. Shawn Grover ~~ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
Do you have access to the cfregistry tag! Regards, Andrew Scott -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Wednesday, 26 September 2001 1:16 AM To: CF-Talk Subject: Re: Absolute Path Usage What I am wanting is a relative path but relative to the web root...for portability. I have an include file that I want to include by specifying the same path every time in all files in the hierarchy. So I put this include file in /global directory and want to reference it by /global/foo.cfm, which if it worked, would be the same include line in all files in my web site. But this path does not work for includes. I have tried a variety of absolute paths and find none that work. If anyone can shed some light on this...my host shares the CF server so asking them to configure a mapping for / is not going to happen since it would only work for my domain and not for all the other domains they host. The only workaround I can think of is create some code that looks at the absolute template location and calculate what level the template is in and set the relative path accordingly... not very idea. Or just hard code the include path in each file on a file by file basis. Bruce - Original Message - From: Peter Tilbrook [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, September 25, 2001 5:10 AM Subject: RE: Absolute Path Usage Relative paths are recommended, if more for portability that anything else. ~~ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
RE: Absolute Path Usage
You need a mapping setup in the CF Administrators by the hosting company, if they will do that for you. -Gary -Original Message- From: Bruce Holm [mailto:[EMAIL PROTECTED]] Sent: Monday, September 24, 2001 11:30 AM To: CF-Talk Subject: Absolute Path Usage I have a NT based hosting company hosting a domain for me. They support CF and Access for the db. When I use CFINCLUDE relative paths work fine. But I'm finding that if I specify an absolute path starting with the web root / it doesn't find the template. For example I have a global directory in the top level directory. If I try to CFINCLUDE template=/global/foo.cfm it won't find it. How can I use absolute paths in this situation? Is there a function or code segment that will tell me how to reference templates using an absolute path? I tried the GetBaseTemplatePath() function but it returns a path from the machine root d:\html\users\...\html\... which when used as an absolute path doesn't seem to work either. - Bruce Holm - Web Programmer Lattice Semiconductor Corp. [EMAIL PROTECTED] - ~~ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
