Cisco ACS [7:73107]
Does anyone have a link as to where can I download an evaluation of Cisco ACS 3.2 on Cisco's website ? Thanks _ Rain coat or t-shirt? Find out with MSN Weather http://www.msn.co.za/weather/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=73107t=73107 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Tacacs help required [7:71818]
1720 router with 128K primary link and ISDN Backup. Problem When primary link falls ISDN backup has authentications problems due to tacacs on both sides (Remote and HQ). Here is my Remote side config and debug aaa new-model aaa authentication login default group tacacs+ local aaa authentication enable default group tacacs+ enable aaa authentication ppp default local none aaa authorization exec default local group tacacs+ aaa authorization network default local none aaa accounting exec default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+ Log Buffer (4096 bytes): CONFREQ [ACKsent] id 8 len 26 00:23:49: BR0:1 LCP:MagicNumber 0x0958D9C8 (0x05060958D9C8) 00:23:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:23:49: BR0:1 LCP: I CONFACK [ACKsent] id 8 len 26 00:23:49: BR0:1 LCP:MagicNumber 0x0958D9C8 (0x05060958D9C8) 00:23:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:23:49: BR0:1 LCP: State is Open 00:23:49: BR0:1 PPP: Phase is AUTHENTICATING, by the peer Jul 2 18:48:06: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 011654760 0 00:24:00: BR0:1 AUTH: Timeout 1 00:24:10: BR0:1 AUTH: Timeout 2 00:24:20: BR0:1 AUTH: Timeout 3 00:24:30: BR0:1 AUTH: Timeout 4 00:24:48: BR0:1 AUTH: Timeout 5 00:24:58: BR0:1 AUTH: Timeout 6 00:25:08: BR0:1 AUTH: Timeout 7 00:25:18: BR0:1 AUTH: Timeout 8 00:25:28: BR0:1 AUTH: Timeout 9 00:25:38: BR0:1 AUTH: Timeout 10 00:25:48: BR0:1 LCP: I TERMREQ [Open] id 15 len 4 00:25:48: BR0:1 LCP: O TERMACK [Open] id 15 len 4 00:25:48: BR0:1 PPP: Phase is TERMINATING Jul 2 18:49:59: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 0116547 600 , call lasted 119 seconds Jul 2 18:49:59: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down Jul 2 18:49:59: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:25:48: BR0:1 LCP: State is Closed 00:25:48: BR0:1 PPP: Phase is DOWN Jul 2 18:50:00: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up Jul 2 18:50:00: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0 00:25:49: BR0:1 PPP: Treating connection as a callout 00:25:49: BR0:1 PPP: Phase is ESTABLISHING, Active Open 00:25:49: BR0:1 PPP: Authorization required 00:25:49: BR0:1 PPP: No remote authentication for call-out 00:25:49: BR0:1 LCP: O CONFREQ [Closed] id 9 len 30 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:MRRU 1524 (0x110405F4) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: I CONFREQ [REQsent] id 2 len 14 00:25:49: BR0:1 LCP:AuthProto PAP (0x0304C023) 00:25:49: BR0:1 LCP:MagicNumber 0x3375A3CD (0x05063375A3CD) 00:25:49: BR0:1 LCP: O CONFACK [REQsent] id 2 len 14 00:25:49: BR0:1 LCP:AuthProto PAP (0x0304C023) 00:25:49: BR0:1 LCP:MagicNumber 0x3375A3CD (0x05063375A3CD) 00:25:49: BR0:1 LCP: I CONFREJ [ACKsent] id 9 len 8 00:25:49: BR0:1 LCP:MRRU 1524 (0x110405F4) 00:25:49: BR0:1 LCP: O CONFREQ [ACKsent] id 10 len 26 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: I CONFACK [ACKsent] id 10 len 26 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: State is Open 00:25:49: BR0:1 PPP: Phase is AUTHENTICATING, by the peer Jul 2 18:50:06: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0112345678 0 00:25:59: BR0:1 AUTH: Timeout 1 00:26:09: BR0:1 AUTH: Timeout 2 00:26:19: BR0:1 AUTH: Timeout 3 00:26:29: BR0:1 AUTH: Timeout 4 00:26:39: BR0:1 AUTH: Timeout 5 Jul 2 18:50:57: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, change d state to up 00:26:49: BR0:1 AUTH: Timeout 6 00:26:59: BR0:1 AUTH: Timeout 7 Jul 2 18:51:13: %SYS-5-CONFIG_I: Configured from console by vty1 (172.16.54.69) 00:27:10: BR0:1 AUTH: Timeout 8 Jul 2 18:51:29: %LINK-5-CHANGED: Interface Dialer0, changed state to standby mo de 00:27:18: Di0 LCP: Not allowed on a Dialer Profile 00:27:20: BR0:1 AUTH: Timeout 9 00:27:30: BR0:1 AUTH: Timeout 10 00:27:39: BR0:1 LCP: I TERMREQ [Open] id 3 len 4 00:27:39: BR0:1 LCP: O TERMACK [Open] id 3 len 4 00:27:39: BR0:1 PPP: Phase is TERMINATING Jul 2 18:51:51: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 0112345678 , call lasted 110 seconds Jul 2 18:51:51: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down Jul 2 18:51:51: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:27:40: BR0:1 LCP: State is Closed 00:27:40: BR0:1 PPP: Phase is DOWN isdn switch-type basic-net3 ! ! ! interface BRI0 no ip address encapsulation ppp dialer pool-member 1 isdn switch-type basic-net3 no fair-queue ppp authentication
Tacacs help required [7:71818]
1720 router with 128K primary link and ISDN Backup. Problem When primary link falls ISDN backup has authentications problems due to tacacs on both sides (Remote and HQ). Here is my Remote side config and debug aaa new-model aaa authentication login default group tacacs+ local aaa authentication enable default group tacacs+ enable aaa authentication ppp default local none aaa authorization exec default local group tacacs+ aaa authorization network default local none aaa accounting exec default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+ Log Buffer (4096 bytes): CONFREQ [ACKsent] id 8 len 26 00:23:49: BR0:1 LCP:MagicNumber 0x0958D9C8 (0x05060958D9C8) 00:23:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:23:49: BR0:1 LCP: I CONFACK [ACKsent] id 8 len 26 00:23:49: BR0:1 LCP:MagicNumber 0x0958D9C8 (0x05060958D9C8) 00:23:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:23:49: BR0:1 LCP: State is Open 00:23:49: BR0:1 PPP: Phase is AUTHENTICATING, by the peer Jul 2 18:48:06: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 011654760 0 00:24:00: BR0:1 AUTH: Timeout 1 00:24:10: BR0:1 AUTH: Timeout 2 00:24:20: BR0:1 AUTH: Timeout 3 00:24:30: BR0:1 AUTH: Timeout 4 00:24:48: BR0:1 AUTH: Timeout 5 00:24:58: BR0:1 AUTH: Timeout 6 00:25:08: BR0:1 AUTH: Timeout 7 00:25:18: BR0:1 AUTH: Timeout 8 00:25:28: BR0:1 AUTH: Timeout 9 00:25:38: BR0:1 AUTH: Timeout 10 00:25:48: BR0:1 LCP: I TERMREQ [Open] id 15 len 4 00:25:48: BR0:1 LCP: O TERMACK [Open] id 15 len 4 00:25:48: BR0:1 PPP: Phase is TERMINATING Jul 2 18:49:59: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 0116547 600 , call lasted 119 seconds Jul 2 18:49:59: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down Jul 2 18:49:59: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:25:48: BR0:1 LCP: State is Closed 00:25:48: BR0:1 PPP: Phase is DOWN Jul 2 18:50:00: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up Jul 2 18:50:00: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0 00:25:49: BR0:1 PPP: Treating connection as a callout 00:25:49: BR0:1 PPP: Phase is ESTABLISHING, Active Open 00:25:49: BR0:1 PPP: Authorization required 00:25:49: BR0:1 PPP: No remote authentication for call-out 00:25:49: BR0:1 LCP: O CONFREQ [Closed] id 9 len 30 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:MRRU 1524 (0x110405F4) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: I CONFREQ [REQsent] id 2 len 14 00:25:49: BR0:1 LCP:AuthProto PAP (0x0304C023) 00:25:49: BR0:1 LCP:MagicNumber 0x3375A3CD (0x05063375A3CD) 00:25:49: BR0:1 LCP: O CONFACK [REQsent] id 2 len 14 00:25:49: BR0:1 LCP:AuthProto PAP (0x0304C023) 00:25:49: BR0:1 LCP:MagicNumber 0x3375A3CD (0x05063375A3CD) 00:25:49: BR0:1 LCP: I CONFREJ [ACKsent] id 9 len 8 00:25:49: BR0:1 LCP:MRRU 1524 (0x110405F4) 00:25:49: BR0:1 LCP: O CONFREQ [ACKsent] id 10 len 26 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: I CONFACK [ACKsent] id 10 len 26 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: State is Open 00:25:49: BR0:1 PPP: Phase is AUTHENTICATING, by the peer Jul 2 18:50:06: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0112345678 0 00:25:59: BR0:1 AUTH: Timeout 1 00:26:09: BR0:1 AUTH: Timeout 2 00:26:19: BR0:1 AUTH: Timeout 3 00:26:29: BR0:1 AUTH: Timeout 4 00:26:39: BR0:1 AUTH: Timeout 5 Jul 2 18:50:57: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, change d state to up 00:26:49: BR0:1 AUTH: Timeout 6 00:26:59: BR0:1 AUTH: Timeout 7 Jul 2 18:51:13: %SYS-5-CONFIG_I: Configured from console by vty1 (172.16.54.69) 00:27:10: BR0:1 AUTH: Timeout 8 Jul 2 18:51:29: %LINK-5-CHANGED: Interface Dialer0, changed state to standby mo de 00:27:18: Di0 LCP: Not allowed on a Dialer Profile 00:27:20: BR0:1 AUTH: Timeout 9 00:27:30: BR0:1 AUTH: Timeout 10 00:27:39: BR0:1 LCP: I TERMREQ [Open] id 3 len 4 00:27:39: BR0:1 LCP: O TERMACK [Open] id 3 len 4 00:27:39: BR0:1 PPP: Phase is TERMINATING Jul 2 18:51:51: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 0112345678 , call lasted 110 seconds Jul 2 18:51:51: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down Jul 2 18:51:51: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:27:40: BR0:1 LCP: State is Closed 00:27:40: BR0:1 PPP: Phase is DOWN isdn switch-type basic-net3 ! ! ! interface BRI0 no ip address encapsulation ppp dialer pool-member 1 isdn switch-type basic-net3 no fair-queue ppp authentication
Tacacs help required [7:71783]
1720 router with 128K primary link and ISDN Backup. Problem When primary link falls ISDN backup has authentications problems due to tacacs on both sides (Remote and HQ). Here is my Remote side config and debug aaa new-model aaa authentication login default group tacacs+ local aaa authentication enable default group tacacs+ enable aaa authentication ppp default local none aaa authorization exec default local group tacacs+ aaa authorization network default local none aaa accounting exec default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+ Log Buffer (4096 bytes): CONFREQ [ACKsent] id 8 len 26 00:23:49: BR0:1 LCP:MagicNumber 0x0958D9C8 (0x05060958D9C8) 00:23:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:23:49: BR0:1 LCP: I CONFACK [ACKsent] id 8 len 26 00:23:49: BR0:1 LCP:MagicNumber 0x0958D9C8 (0x05060958D9C8) 00:23:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:23:49: BR0:1 LCP: State is Open 00:23:49: BR0:1 PPP: Phase is AUTHENTICATING, by the peer Jul 2 18:48:06: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 011654760 0 00:24:00: BR0:1 AUTH: Timeout 1 00:24:10: BR0:1 AUTH: Timeout 2 00:24:20: BR0:1 AUTH: Timeout 3 00:24:30: BR0:1 AUTH: Timeout 4 00:24:48: BR0:1 AUTH: Timeout 5 00:24:58: BR0:1 AUTH: Timeout 6 00:25:08: BR0:1 AUTH: Timeout 7 00:25:18: BR0:1 AUTH: Timeout 8 00:25:28: BR0:1 AUTH: Timeout 9 00:25:38: BR0:1 AUTH: Timeout 10 00:25:48: BR0:1 LCP: I TERMREQ [Open] id 15 len 4 00:25:48: BR0:1 LCP: O TERMACK [Open] id 15 len 4 00:25:48: BR0:1 PPP: Phase is TERMINATING Jul 2 18:49:59: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 0116547 600 , call lasted 119 seconds Jul 2 18:49:59: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down Jul 2 18:49:59: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:25:48: BR0:1 LCP: State is Closed 00:25:48: BR0:1 PPP: Phase is DOWN Jul 2 18:50:00: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up Jul 2 18:50:00: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0 00:25:49: BR0:1 PPP: Treating connection as a callout 00:25:49: BR0:1 PPP: Phase is ESTABLISHING, Active Open 00:25:49: BR0:1 PPP: Authorization required 00:25:49: BR0:1 PPP: No remote authentication for call-out 00:25:49: BR0:1 LCP: O CONFREQ [Closed] id 9 len 30 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:MRRU 1524 (0x110405F4) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: I CONFREQ [REQsent] id 2 len 14 00:25:49: BR0:1 LCP:AuthProto PAP (0x0304C023) 00:25:49: BR0:1 LCP:MagicNumber 0x3375A3CD (0x05063375A3CD) 00:25:49: BR0:1 LCP: O CONFACK [REQsent] id 2 len 14 00:25:49: BR0:1 LCP:AuthProto PAP (0x0304C023) 00:25:49: BR0:1 LCP:MagicNumber 0x3375A3CD (0x05063375A3CD) 00:25:49: BR0:1 LCP: I CONFREJ [ACKsent] id 9 len 8 00:25:49: BR0:1 LCP:MRRU 1524 (0x110405F4) 00:25:49: BR0:1 LCP: O CONFREQ [ACKsent] id 10 len 26 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: I CONFACK [ACKsent] id 10 len 26 00:25:49: BR0:1 LCP:MagicNumber 0x095AAF85 (0x0506095AAF85) 00:25:49: BR0:1 LCP:EndpointDisc 1 ALBERANTE (0x131001414C424552414E5445 5F424D57) 00:25:49: BR0:1 LCP: State is Open 00:25:49: BR0:1 PPP: Phase is AUTHENTICATING, by the peer Jul 2 18:50:06: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0112345678 0 00:25:59: BR0:1 AUTH: Timeout 1 00:26:09: BR0:1 AUTH: Timeout 2 00:26:19: BR0:1 AUTH: Timeout 3 00:26:29: BR0:1 AUTH: Timeout 4 00:26:39: BR0:1 AUTH: Timeout 5 Jul 2 18:50:57: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, change d state to up 00:26:49: BR0:1 AUTH: Timeout 6 00:26:59: BR0:1 AUTH: Timeout 7 Jul 2 18:51:13: %SYS-5-CONFIG_I: Configured from console by vty1 (172.16.54.69) 00:27:10: BR0:1 AUTH: Timeout 8 Jul 2 18:51:29: %LINK-5-CHANGED: Interface Dialer0, changed state to standby mo de 00:27:18: Di0 LCP: Not allowed on a Dialer Profile 00:27:20: BR0:1 AUTH: Timeout 9 00:27:30: BR0:1 AUTH: Timeout 10 00:27:39: BR0:1 LCP: I TERMREQ [Open] id 3 len 4 00:27:39: BR0:1 LCP: O TERMACK [Open] id 3 len 4 00:27:39: BR0:1 PPP: Phase is TERMINATING Jul 2 18:51:51: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 0112345678 , call lasted 110 seconds Jul 2 18:51:51: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down Jul 2 18:51:51: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:27:40: BR0:1 LCP: State is Closed 00:27:40: BR0:1 PPP: Phase is DOWN isdn switch-type basic-net3 ! ! ! interface BRI0 no ip address encapsulation ppp dialer pool-member 1 isdn switch-type basic-net3 no fair-queue ppp authentication
Urgent: Async serial modem connection [7:71436]
I have a 2522 and a 1720.I want to setup the 2522 so that it will dial via a serial port using a modem that is attached.I have a DB60 to DB25 DTE cable for that.The router must dial the AUX port on the 1720 for use in out of band management.The 2522 does not want to dial out. Could someone please look at my config and maybe help. Thanks Cisco 2522 IOS (tm) 2500 Software (C2500-JS40-L), Version 11.3(6)T, RELEASE SOFTWARE (fc1) version 11.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router1 ! ! username router2 password 0 ip subnet-zero chat-script test ATDT\T TIMEOUT 120 CONNECT \C ! ! ! ! interface Loopback0 ip address 192.168.0.1 255.255.255.0 ! interface Ethernet0 no ip address shutdown ! interface Serial0 no ip address no ip mroute-cache shutdown ! interface Serial1 no ip address shutdown ! interface Serial2 physical-layer async no ip address encapsulation ppp bandwidth 9600 dialer in-band dialer-group 1 async mode dedicated ! interface Serial3 no ip address shutdown ! interface Serial4 no ip address shutdown ! interface Serial5 no ip address shutdown ! interface Serial6 no ip address shutdown ! interface Serial7 no ip address shutdown ! interface Serial8 no ip address shutdown ! interface Serial9 no ip address shutdown ! interface BRI0 no ip address shutdown ! interface Dialer3 ip unnumbered Loopback0 encapsulation ppp dialer in-band dialer idle-timeout 20 dialer map ip 192.168.0.2 name Router1 modem-script test broadcast 0125417453 dialer hold-queue 15 dialer load-threshold 1 either dialer-group 1 no cdp enable ppp authentication chap ! ip classless ip route 192.168.0.2 255.255.255.255 Dialer3 ! dialer-list 1 protocol ip permit ! ! line con 0 line 2 modem InOut modem autoconfigure type default transport input all autohangup line aux 0 line vty 0 4 login ! end Dialer3 is up (spoofing), line protocol is up (spoofing) Hardware is Unknown Interface is unnumbered. Using address of Loopback0 (192.168.0.1) MTU 1500 bytes, BW 56 Kbit, DLY 2 usec, rely 255/255, load 1/255 Encapsulation PPP, loopback not set DTR is pulsed for 1 seconds on reset Last input never, output never, output hang never Last clearing of show interface counters never Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/0/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions Serial2 is up (spoofing), line protocol is up (spoofing) Hardware is CD2430 in async mode MTU 1500 bytes, BW 9600 Kbit, DLY 10 usec, rely 255/255, load 1/255 Encapsulation PPP, loopback not set, keepalive not set DTR is pulsed for 5 seconds on reset LCP Closed Closed: CDPCP Last input never, output 00:08:54, output hang never Last clearing of show interface counters never Queueing strategy: fifo Output queue 0/10, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 240 packets output, 5760 bytes, 0 underruns 0 output errors, 0 collisions, 23 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions Cisco 1720 IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(4)YB, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Synched to technology version 12.2(6.8)T2 Current configuration : 1254 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router2 ! enable password ! username router1 password 0 ip subnet-zero ! ! no ip domain-lookup ! chat-script Dialout ABORT ERROR ABORT BUSY AT OK ATDT \T TIMEOUT 45 CONNECT \c ! ! ! interface Loopback0 ip address 192.168.0.2 255.255.255.0 ! interface BRI0 no ip address shutdown ! interface FastEthernet0 no ip address shutdown speed auto ! interface Serial0 no ip address shutdown ! interface Async5 no ip address encapsulation ppp dialer in-band dialer pool-member 20 async default routing ppp authentication chap callin ! interface Dialer10 ip unnumbered Loopback0 encapsulation ppp dialer pool 20 dialer remote-name router1 dialer idle-timeout 900
AAA Problem [7:70448]
I have setup AAA on a router which has a primary serial line and a ISDN backup line.When the primary line goes down the back line does not authenticate locally at the HQ router.When I take AAA off then it works fine.If I modify the authentication for login to local then it deletes the first line.How do I setup this thing to work with both tacacs+ and for the ISDN to authenticate locally.Please assist. aaa authentication login default group tacacs+ local aaa authentication enable default group tacacs+ enable aaa authentication ppp default local aaa authorization exec default local group tacacs+ aaa authorization network default local if-authenticated aaa accounting exec default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+ _ Wazup? Find out by joining SA Teens - http://groups.msn.com/SAteens/ MSN's hottest South African Group Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=70448t=70448 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Modem question [7:70392]
Is there a way to connect a modem to a serial or ethernet port for direct telnet to a remote router with a modem ?. I have a 2507 and 2522. Thanks _ Download MSN Messenger 5.0. http://messenger.msn.co.za/ It's free! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=70392t=70392 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AUX Port dial in [7:69994]
I have a Windows PC and would like to telnet into a remote router via the AUX port using a modem on it.Does anyone have any sample configs for the router. PC--modem---modem--Router (AUX Port) Thanks _ Wazup? Find out by joining SA Teens - http://groups.msn.com/SAteens/ MSN's hottest South African Group Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=69994t=69994 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AUX Port dial in [7:69976]
I would like to configure the AUX port to allow for out of band management.I have a modem to connect to it.Should the router go down I could dial in from my PC and connect to the router to check for any problems. Does anyone have a sample config for this or documents. Thanks _ Download MSN Messenger 5.0. http://messenger.msn.co.za/ It's free! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=69976t=69976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN Question [7:66610]
If i do a show controllers bri 0 , how do I know if there is a cable connected to the port ? What do I have to look at to determine this ? I know that if you do it for serial interfaces you can see if the clocks have been detected. Any ideas Thanks _ F1 genius? Win big prizes in our F1 challenge! http://cars.msn.co.za/f1challenge/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=66610t=66610 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
clear arp [7:63499]
Is there a command that I can use to clear the arp table of a specific VLAN on a Cat6500 with MSFC2?. thanks _ Who's your buddy? Win Vespa scooters for yourself and 5 of your buddies! http://www.sweepstakes2003.com/entry.aspx?LocationID=3 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=63499t=63499 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT : Routing Software [7:61668]
I am looking for free routing software (RIP,OSPF,ISIS,BGP,DVMRP) for a linux box.I would like to know as well where can I get X.21 serial cards and PCMCIA card slots for a PC as I would like to build a small network for practice. Any notes would be appreciated if anyone has done something like this. Thanks _ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61668t=61668 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Splitting an ethernet segment [7:61257]
Here is my current scenario- I have a 3640 RAS router at my HQ and 1x1700 routers at a remote site.I want to add another router to another remote site but use the same ethernet segment on DHCP.I have a Win2000 server doing DHCP for the 1 remote router. On the DHCP server I want to split the segment with a 255.255.255.128 and let both the router share that segment. I use static routes for the dialer interfaces. The current remote router has a e0 ip gateway address of 172.16.16.1 I want to make the other one 172.16.16.129 255.255.255.128 Will this work ?. Thanks _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61257t=61257 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IP Telephony Beta [7:57425]
Is there an IP Telephony beta exam due to come out in November ? _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57425t=57425 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Voice solution - help required [7:53469]
I have 2 Siemens PABX's at 2 sites as well as a 256KB line between them.I would like to make the 256K line a tie line and run only voice on the link.I require 2 routers on both sides preferably 3640's. I am not so well versed with voice modules for the Cisco.Could someone please assist with a spec for the 3640 ( eg what modules are required etc..) thanks _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53469t=53469 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Command [7:52157]
I am looking for some info on this command.I checked Cisco but did not find much.Anyone with a link ? session-disconnect-warning Thanks _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52157t=52157 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco ACS ver 2.6 [7:52065]
I am running Cisco ACS 2.6 and I have remote users dialing into our network via analog and digital.The ACS authenticates them using the domain database.I would like to know which users didnot dial into the network for the last 30 days and have their accounts disabled automatically so that they would have to request access. I would also not want their office logon to be disabled as it is the same username and password. Is there anyway I could do this without affecting the other logon. Thanks _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52065t=52065 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN Help needed [7:51634]
I get the following error message as soon as I dial into the NAS.If I do a who on the NAS I can see that it gets connected but it disconnects as it cannot get authenticated. This my IOS on the NAS IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(8)T4, RELEASE SOFTWARE (fc1) 00:53:86758144308: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up 00:53:88062060644: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0 00:53:20: BR0:1 PPP: Treating connection as a callout 00:53:20: BR0:1 PPP: Authorization required 00:53:22: BR0:1 CHAP: I CHALLENGE id 2 len 30 from ZA108005D 00:53:22: BR0:1 CHAP: Using hostname from interface CHAP 00:53:22: BR0:1 CHAP: Using password from interface CHAP 00:53:22: BR0:1 CHAP: O RESPONSE id 2 len 30 from FD_PMBURG 00:53:22: BR0:1 CHAP: I FAILURE id 2 len 26 msg is Authentication failure 00:53:98784247808: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 0116547 600 00:53:98784247808: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 01165 47600 , call lasted 2 seconds 00:53:98834579456: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down 00:53:98784247808: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0 00:53:25: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 68 changed to down 00:53:115964116991: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BRI0, TEI 68 chang ed to down Please help Thanks _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=51634t=51634 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN Help needed [7:51634]
I configured the following on the NAS and it then automaically worked. aaa authentication login default local aaa authentication login NO_AUTHEN none aaa authentication ppp default local aaa authorization network default local none aaa session-id common From: Claudia Walter To: Shane Stockman Subject: RE: ISDN Help needed [7:51634] Date: Mon, 19 Aug 2002 13:52:07 +0100 Hi Shane, mmmh, on one side you have configured the username and password under the global config... on ZA108005D you have done it ok: username FD_PMBURG password 0 bmw2002 but on FD_PMBURG you have done it under the dialer ... ppp authentication chap callin ppp chap hostname FD_PMBURG ppp chap password 0 bmw2002 As far as I understand that should work but maybe just for testing you should try to configure the user name there as well in the global config? This could be very well a software issue... NB: Please keep on sending your reply to the alias that the others can also benefit from this discussion. A good page on CCO about ISDN trouble-shooting is here... http://www.cisco.com/warp/public/779/smbiz/service/troubleshooting/ts_isdn.h tm Cheers, Claudia -Original Message- From: Shane Stockman [mailto:[EMAIL PROTECTED]] Sent: 19 August 2002 12:29 To: [EMAIL PROTECTED] Subject: RE: ISDN Help needed [7:51634] Here is the NAS config - interface dialer 3 version 12.2 service timestamps debug datetime msec localtime service timestamps log datetime msec localtime no service password-encryption ! hostname ZA108005D ! logging buffered 32768 debugging no logging console enable password St1tch_12 ! username FD_PMBURG password 0 bmw2002 memory-size iomem 10 clock timezone za 2 modem country mica south-africa ip subnet-zero ! ! no ip domain-lookup ip host FD_PMBURG 172.20.169.2 ! isdn switch-type primary-net5 chat-script callback ABORT ERROR ABORT BUSY ATDT \T TIMEOUT 60 CONNECT \C chat-script offhook ATH1 OK ! ! ! ! ! ! ! fax interface-type fax-mail mta receive maximum-recipients 0 ! controller E1 2/0 pri-group timeslots 1-31 ! controller E1 2/1 pri-group timeslots 1-31 ! ! ! ! interface Loopback1 ip address 172.20.60.1 255.255.255.0 ! interface FastEthernet0/0 speed 100 full-duplex ! interface FastEthernet0/1 description ip address speed 100 full-duplex standby 109 ip ! interface FastEthernet2/0 no ip address shutdown duplex auto speed auto ! interface Serial2/0:15 no ip address encapsulation ppp no logging event link-status dialer pool-member 1 isdn switch-type primary-net5 isdn incoming-voice modem no fair-queue ppp authentication pap chap ! interface Serial2/1:15 no ip address encapsulation ppp no logging event link-status dialer pool-member 1 isdn switch-type primary-net5 isdn incoming-voice modem no fair-queue ppp authentication pap chap ! interface Group-Async1 ip unnumbered FastEthernet0/1 encapsulation ppp dialer in-band dialer idle-timeout 1800 dialer-group 1 autodetect encapsulation ppp async mode interactive peer default ip address pool PRI ppp callback permit ppp authentication chap pap group-range 97 126 ! interface Dialer3 bandwidth 64 ip address 172.20.61.13 255.255.255.252 ip broadcast-address 172.20.61.15 encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer remote-name FD_PMBURG dialer idle-timeout 180 dialer-group 1 ppp authentication pap chap ppp chap hostname ZA108005D ppp chap password 0 bmw2002 ppp multilink multilink max-links 2 multilink load-threshold 180 either ! router eigrp 328 redistribute static network 172.20.0.0 no auto-summary no eigrp log-neighbor-changes ! ip classless ip http server ip pim bidir-enable ! ! access-list 101 deny udp any any eq netbios-ns access-list 101 deny udp any any eq netbios-dgm access-list 101 deny udp any any eq 135 access-list 101 deny udp any any eq ntp access-list 101 deny eigrp any any access-list 101 deny udp any any eq rip access-list 101 permit ip any any log dialer-list 1 protocol ip list 101 dialer-list 1 protocol ipx deny ! snmp-server community ECOM RW snmp-server community FERNS RO call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! line con 0 line 33 62 script modem-off-hook offhook script callback callback modem InOut modem autoconfigure discovery transport input all autoselect during-login autoselect ppp flowcontrol hardware line 97 126 script modem-off-hook offhook script callback callback modem InOut modem autoconfigure discovery transport input all autoselect during-login autoselect ppp flowcontrol hardware line aux 0 line vty 0 4 password tpop login ! ntp clock-period 17179951 ntp server 172.20.108.5 time-range Business periodic weekdays 8:00 to 17:00 ! ! end ZA108005D# sh ver Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(8)T4, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Fri 03-May-02 16:58 by ccai Image text-base: 0x60008930, data-base: 0x61558000 ROM: System
ISDN Backup [7:50261]
I currently have 2 point to point links ruuning to the same place using eigrp as the routing protocol.I have added a isdn bri as backup but I don't want the isdn to kick in until both the point to point links drop. There is a serious routing issue with have 1 link up and the bri as the will load balance across and cause a loss of packets. If there are any config examples or documents or if anyonehas done this sort of config please send some info. Thanks _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=50261t=50261 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CSPM for Cisco IDS [7:46206]
I would like to configure my CSPM to notify me via email when I get certain serverities.My CSPM and Exchange server are not on the same segment.All Cisco says is If the SMTP server does not exist in a defined network within the NTT, a new network object must be created How this should be done is not said. If any one can help me with this I would appreciate it. thanks _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=46206t=46206 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dialback problem [7:45749]
I have a problem with isdn dialback in that when you dial in it cuts you off but you wait until the call cuts off.Analog dialback works fine on the same router. Here is a config ,maybe some one can see some thing I cannot: IOS (tm) 3600 Software (C3640-IS-M), Version 12.1(5)T6, RELEASE SOFTWARE (fc1) boot system flash c3640-is-mz.121-5.T6.bin logging buffered 1600 debugging logging rate-limit console 10 except errors no logging console aaa new-model aaa authentication login default group tacacs+ local aaa authentication enable default group tacacs+ enable aaa authentication ppp default local group tacacs+ aaa authorization exec default local group tacacs+ aaa authorization network default local group tacacs+ aaa accounting exec default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+ ! clock timezone sast 2 modem country mica south-africa ip subnet-zero ! ! no ip finger ip name-server 172.16.73.73 ! isdn switch-type primary-net5 chat-script callback ABORT ERROR ABORT BUSY ATDT \T TIMEOUT 60 CONNECT \C chat-script offhook ATH1 OK call rsvp-sync ! controller E1 0/0 framing NO-CRC4 pri-group timeslots 1-31 ! controller E1 0/1 shutdown ! interface Loopback0 ip address 172.16.168.1 255.255.255.0 shutdown ! interface Serial0/0:15 no ip address encapsulation ppp ip tcp header-compression passive dialer rotary-group 0 dialer-group 1 isdn switch-type primary-net5 isdn incoming-voice modem isdn sending-complete ppp callback accept ! interface FastEthernet1/0 ip address 172.16.63.3 255.255.255.192 duplex auto speed auto ! interface FastEthernet1/0.1 ! interface Group-Async1 bandwidth 64 ip unnumbered FastEthernet1/0 ip directed-broadcast encapsulation ppp autodetect encapsulation ppp async mode interactive peer default ip address pool PRI no fair-queue ppp callback accept ppp authentication pap chap group-range 65 94 ! interface Dialer0 ip unnumbered FastEthernet1/0 ip directed-broadcast encapsulation ppp ip tcp header-compression passive dialer-group 1 peer default ip address pool PRI ppp callback accept ppp authentication pap chap ppp multilink ! router eigrp 328 passive-interface Dialer1 network 172.16.0.0 no auto-summary no eigrp log-neighbor-changes ! ip local pool PRI 172.16.63.65 172.16.63.94 ip classless no ip http server ! logging 172.16.75.75 access-list 101 deny ip any host 255.255.255.255 access-list 101 permit ip any any dialer-list 1 protocol ip permit tacacs-server host 193.23.42.131 tacacs-server key 1_x12=2 snmp-server community 1nf0rm1x RO snmp-server community sybase_ver1tas RW ! dial-peer cor custom ! line con 0 transport input none line 65 94 autoselect during-login autoselect ppp script dialer micout script modem-off-hook offhook script callback callback modem InOut modem autoconfigure discovery transport input all flowcontrol hardware line aux 0 line vty 0 4 exec-timeout 15 0 password tpop ! ntp clock-period 17179998 _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45749t=45749 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DHCP [7:45338]
I have a Cisco 1720 router with 2 x BRI modules and a cisco switch connected with a couple of PC's.These dial into a Cisco 3640 router.I want to setup DHCP.I have a DHCP server on the 3640 side with an address range.I looked for a sample config on Cisco.com but all I got was how to configure a Router as a DHCP server. Does anyone have a sample config on how to set this up.I know that one has to use ip helper address but where ??? Thanks _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45338t=45338 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Beta RS [7:42907]
Could any one tell whether ISIS and packet formats are asked alot in the exam.I read that Catalyst 6x00/5x00 are asked.Is it hardware or CatOS/IOS questions ? Thanks _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=42907t=42907 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Off topic: Syslog Server [7:36360]
I have a sun box with solaris 5.6 which I need to convert into a syslog server.I am very new to this and would like to know how to setup the ip address and the files so that it does logging.I would like to point some of my cisco routers to it. Thanks _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36360t=36360 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IDS 4210 help again [7:36047]
I have setup the ids with the all the relevant in for such as the sensor and ids manager details as well as the ip address,netmask,default gateway. My question is that if 1 interface is the monitoring interface and it is connected to the internet router and the other is the command and control interface and that is connected to my switch , that interface needs and address if I am correct as it will have to have a vlan number. Which interface uses the ip address that I entered in the configuration and how will I get the command and control interface to work ? Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36047t=36047 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IDS 4210 help [7:35940]
I am currently setting up a IDS sensor 4210 and would like to know how to set up the command interface and the monitoring interface as I would like to manage it from my CSPM server. I need to get the command interface to talk to the switch but I don't know where to set an ip address for it so that my CSPM software cna find it. Thanks in advance. _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35940t=35940 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN Solution -help needed [7:33668]
I have a 1601 with BRI Wic and 3COM hub with 4 users.There is only 1 ISDN BRI.I need all four users to access the main office but use the ip pool on the main 3640. Any ideas Thanks _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33668t=33668 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Books [7:28383]
I am interested in buying the following books, would any one have recommendations for these. Thanks Troubleshooting IP Routing Protocols (CCIE Professional Development) ISBN: 1587050196 CCIE Practical Studies, Volume I ISBN: 1587200023 CISCO Certification: Bridges, Routers Switches for CCIEs ISBN: 0130903892 == Cisco(r) CCIE(tm) Lab Practice Kit ISBN: 007212766X _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=28383t=28383 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IP Telephony Exam [7:27277]
I would like to know the pass mark for the Ip Telephony exam as I will be writing next week. Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27277t=27277 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IP Telephony study guide or cramsession [7:27130]
I will be writing the IP Telephony exam next week and would like to know whether any one has a study guide or cramsession that they could mail to me or point to some sites except cramsession.com as they don't have one. Thanks in advance _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27130t=27130 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dialer Threshold [7:24917]
I have a 128K leased line and would like to backup the link with ISDN.I would like to as well setup the ISDN so that if the leased line reaches a certain percentage of usage the ISDN kicks in and sorts of loads balance the line until it returns below the threshold. I have a 3640 with a PRI at the cental site and 2500's at the remote sites. I am looking for a few config examples. Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24917t=24917 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Setting up TACACs on catalyst switches [7:23944]
I have intstalled a couple of switches (6509,5500,4000,3548,2924)in my network a couple of months ago and would now like to add tacacs to the switches for AAA. Does anyone have any ideas with regards to the set commands and as well not letting me lock myself out of the switch. Thanks in advance _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23944t=23944 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switch to 3Com hub [7:20517]
I have set a 2924 with a management address on vlan 1.We want to use a cross over to a 3com hub which runs into another 3com which runs into a router.There is a 2mb line between between the 2 buildings and the core sits at the second building. Will I be able to telnet into the switch ? Thanks in advance _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20517t=20517 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco ACS [7:18084]
I would like to know how to setup an TACACS+ but use a windows NT user database not the ACS one ? Any ideas Thanx _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=18084t=18084 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bridging [7:15588]
I have 1 ethernet and 1 token ring interface on a 2600 ( Cisco 2612 ) router. We did not want to buy a fancy switch with a token-ring translational module etc so we bought the router instead. I do not want to route at all, ie the IP network must be the same on the Token and Ethernet sides. Can some one please help with a sample config. Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15588t=15588 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bridging [7:15589]
I have 1 ethernet and 1 token ring interface on a 2600 ( Cisco 2612 ) router. We did not want to buy a fancy switch with a token-ring translational module etc so we bought the router instead. I do not want to route at all, ie the IP network must be the same on the Token and Ethernet sides. Can some one please help with a sample config. Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15589t=15589 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Static Routing [7:8896]
Hi I have 3 routers running a point-to-point network.There are 2 branches and the 3rd router is at the ISP.All the links are 64K and I am using static routes.I can telnet into and ping all 3 routers both serial and ethernet interfaces , but I cannot see the WINS and DNS servers at the ISP. I have put a static route on the fastethernet interface at the ISP router 0.0.0.0 0.0.0.0 fast 0 and the same route on the serial interface at the second branch which connects at to the ISP router 0.0.0.0 0.0.0.0 serial 1. B But after that I still cannot see those 2 servers from branch1 and 2.If I do a show arp on the ISP router I can see the 2 servers and ping them from that router, but not from the other 2. BRANCH164k Link--BRANCH264K Link-ISP--Ethernet--Servers Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=8896t=8896 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help [7:3861]
I have a switch with a MSFC and it is giving me a routing error as follows: 1d02h: IP-EIGRP: Neighbor 172.16.155.1 not on common subnet for Vlan1 I have checked every thing I can think of but it all looks fine.I cannot see VLAN 155 due to this error ( ping or telnet ). Here is the contents of my sh ver: IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Fri 04-Feb-00 00:28 by lstringr Image text-base: 0x60008900, data-base: 0x60CBC000 ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE BOOTFLASH: MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT REL EASE SOFTWARE (fc1) ZA002002 uptime is 4 days, 2 hours, 45 minutes System returned to ROM by reload Running default software cisco Cat6k-MSFC (R5000) processor with 122880K/8192K bytes of memory. Processor board ID SAD0408037F R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache Last reset from power-on Bridging software. X.25 software, Version 3.0.0. 33 Virtual Ethernet/IEEE 802.3 interface(s) --More-- 123K bytes of non-volatile configuration memory. 4096K bytes of packet SRAM memory. 16384K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x102 Any help would be appreciated Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3861t=3861 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help [7:3861]
Its fixed. Thanks From: [EMAIL PROTECTED] To: Subject: Re: Help [7:3861] Date: Wed, 09 May 2001 16:05:32 EDT Shane, I found this link on the CCO. It interprets the not found on common subnets error. www.cisco.com/warp/public/103/15.html HTH, Rob H. MCSE, CCNP, CCDP _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3896t=3861 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN [7:3322]
I will be writing BCMSN this coming Friday and would like some pointers before I write on what I should more effort on. Thanks in Advance _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3322t=3322 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router problem at remote node
I have a 1720 with serial wic on a remote branch.I cannot telnet nor ping the router even though the router on my side says that both the interface and line is up.The guy on the other side can see some routes not all.I have checked the config with him line by line so I know it is not the config , done a clear ip route * ,shut the serial then opened it and much more with no luck.On his side it shows the serial and line as up.I figure that there could be one of only 2 problems 1. The serial wic is a bit stuffed 2. IOS is a bit on the blink Any suggestions would be appreciated. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router problem
I have a 1720 with a serial wic at a remote site. I see the interface on my side as up/up but I cannot telnet nor ping the remote site successfully. I have had the guy on the remote side check the config line by line and clear ip routes , and it does not show all the routes even though the 1720 is using eigrp and has ip classless.He can see his side as up/up as well. I think it is a hardware or IOS problem. Any suggestions Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BSCN
I will be writing my bscn on friday and would like some tips or pointers before I write. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
help
I am going to connect a cable from the telco's chrono directly to the PRI module on the 3640. I need the pinouts for the cable from the chrono to the port.I am using cat5 cable. This is what I have found but I am unsure whether it is correct to use as I don't want to blow the module port. Pinouts Telco Chrono PRI Module DB15 1 TX Tip9 TX Tip 2 TX Ring 2 TX Ring 4 RX Tip8 RX Tip 5 RX Ring 15 RX Ring I think this would be 120-Ohm balanced connection. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco 3640 PRI module cable pinout
I am going to connect a cable from the telco's chrono directly to the PRI module on the 3640. I need the pinouts for the cable from the chrono to the port.I am using cat5 cable. This is what I have found but I am unsure whether it is correct to use as I don't want to blow the module port. Pinouts Telco Chrono PRI Module DB15 1 TX Tip9 TX Tip 2 TX Ring 2 TX Ring 4 RX Tip8 RX Tip 5 RX Ring 15 RX Ring I think this would be 120-Ohm balanced connection. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question on ISP track
Could someone please recommend some good books for the track below. Core/Pop technologies ,DSL, Dial, Cable, Wireless, or Optical. Elements of WAN Switching and Dial. It is for the new track Cisco will be offering as a beta. I would like to get some books before hand to study on so that I don't miss the boat. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Catalyst traceroute problem
Below is the show ver of the switch Cisco Internetwork Operating System Software IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT RELEA SE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Fri 04-Feb-00 00:28 by lstringr Image text-base: 0x60008900, data-base: 0x60CBC000 ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE BOOTFLASH: MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT REL EASE SOFTWARE (fc1) ZA002002 uptime is 6 weeks, 3 days, 7 hours, 17 minutes System returned to ROM by power-on Running default software cisco Cat6k-MSFC (R5000) processor with 122880K/8192K bytes of memory. Processor board ID SAD0408037F R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache Last reset from power-on Bridging software. X.25 software, Version 3.0.0. 16 Virtual Ethernet/IEEE 802.3 interface(s) 123K bytes of non-volatile configuration memory. 4096K bytes of packet SRAM memory. 16384K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x102 My problem is that when I try to tracroute to a printer on a vlan it just gives me the stars , but I can ping quite easily from the same switch.I had a trace done from the mainframe and it stops at this switch and I had another mainframe trace done from a mainframe in Europe and it still stops at this switch.I can ping the printer address and get a 100% reply from both mainframes. Any suggestions ? _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Protocol numbers
I see in the BSCN courseware they mention something about protocol number for example igrp=9 and RIP has a UDP port of 520. Does anyone know where I could get a list of the numbers for protocols. I have searched Cisco.com but could not find. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Catalyst Supervisor Engines
Could someone please explain the difference between the supervisor 1,2,3 engines that go with the Catalyst 5000 and 6500,why are they used and where would I use them ( Core , Distribution, Access). Another question - What would be the easiest way to test serial and ethernet ports on a router with minimal equipment and cables ( what would be needed to do so ). Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco 1601 AUI
Could someone please provide some commands for configuring a 1601 AUI port as the ethernet one is blown. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CID Beta
Well I wrote the CID Beta exam earlier today and damn was it crap.My exam said Cisco Secure VPN on the top.It seemed like it was a test that was made up of alot of different tests.I did'nt know that Voice and VPN and numerous other non related design topics were part of the new CID.I used the Sybex CID book and it barely was enough.I felt more like it was a nail the sucker who thought he was going to save some money on a Beta Exam. Any comments from others who have taken this exam _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CID Beta
I just checked the Cisco Beta Exam area and it states that the beta is closed as of 7 December.Does this mean the anyone who has booked for after that day cannot write ? _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPX Problem
This might seem silly but I am trying to enable ipx routing on my router and it just keeps telling unrecog command , even though I am in global config mode.When I do a ipx ? , i get unrecog command in global config mode.Same with apple IOS (tm) 1600 Software (C1600-Y-L), Version 12.0(3), RELEASE SOFTWARE (fc1) Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IP Classless
IP Classless is used for route summarization and for further subnetting a subnet for point-to-point WAN links using VLSM.It is important because by using ip classless u can perform route summarization thereby saving on bandwidth utilization,router processing and reduce the size of routing tables.With regards to VLSM you will be better utilising your IP addressing structure. It also supports discontiguous subnets,thereby letting the subnets communicate with each other. These I think are probably the most common reasons for using ip classless. N.B IP Classful also has something called automatic summarization,but this does not support discontiguous subnets. EIGRP,OSPF,IS-IS,RIPv2,BGP are all classless routing protocols Hope this explains what you want to know From: "Cisco Kid" [EMAIL PROTECTED] Reply-To: "Cisco Kid" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: IP Classless Date: Sun, 29 Oct 2000 13:40:01 - Hi, Can someone pls. give me a simple explanation of the IP Classless command and why/when it is necessary. Thanks Rashid _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IDB
IDBs provide a central location in memory for storing information about network interface cards for use by the interface driver code. They are able to represent all knds of interfaces including subinterfaces.The IDB data stuctures also use alot of memory so Cisco has limited them to 300 per router. Each physical whether it is configured or not or if it is up or shut uses one IDB.It works the same for the subinterfaces, each subinterfaces gets one IDB. e.g one interface has 5 subinterfaces so there are 6 IDBs allocated. Subinterfaces use IDBs but FR PVCs don't.If a FR has 10 PVCs and does not use any subinterfaces it uses a single IDB. Another example:1 interface with 2 subinterfaces each having 3 PVCs only use 3 IDBs. Hope This helps From: "John W. Redmond" [EMAIL PROTECTED] Reply-To: "John W. Redmond" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: IDB Date: Fri, 27 Oct 2000 14:33:30 -0400 Hey everyone, What does IDB represent in a cisco environment? Thanks, JOHN _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDA questions
What percent of the exam is case studies ? Do they go into alot of techie info like admin distances ,FR config,ISDN stuff ? Were there any mind boggling questions that made you wonder whether you were writing the CCIE not the CCDA ? Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Explanation for VLSM
Are there any good links for VLSM or could someone give me a good explanation.The archives are unavailable. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Medium enterprise design assistance
I am currently designing a new network for a medium size enterprise.Here are the details . 17 remote sites (8 users currently) 1 central site (HQ) Wan - ISDN from each site running to PSTN. From PSTN PRI is used to central site. For the remote sites I am using a 1720 with a isdn WIC. At HQ I will use a 3662(1x 2port ISDN PRI module 1xdigital modem(30)) 1x Pix Firewall and a 2924 in a DMZ area. On the inside I will use a 5500 for the servers and running gigabit to the servers. I initially thought of creating a 6500 backbone running giga ether and connecting all the servers to the backbone but financial constraints might not make it advisable. Any solutions or suggestions. Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Linux Proxy server and 1700 using NAT
I have a cisco 1720 with 2xISDN WIC cards and a Linux Proxy Server with 2xNIC's. I need to know whether I can use 1 nic for the internal address and another for the global addresse's given by the ISP using only one ethernet port of the 1720. -Proxy--NIC1(Internal) -Router-ISDN WIC 0---|--PSTN -Server-NIC2(Outside )-Eth0---ISDN WIC 1---| Sorry for the sketch I also need to connect the Proxy to a 2924 for 8 users Is this possible ? Any Solution Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN Solution -help needed
I want to connect users from a small business to the internet via a proxy server and cisco 1601 with IP Plus IOS . There will also be a remote user with an ISDN line and a Cisco 801 will be dialing into the company and another user that will be coming in via a modem. Both remote users will be needing access to a server. I will be using access-lists on the 1601 and NAT ( for the users in the company getting out to the internet ).The ISP will issue addresses for the routers. I need suggestions and other ideas on how to make this work.I f there is any other routers that will do the job let me know. There will be appoximately 10-15 people that is in the company that will be using this ISDN link for Internet access. Thanks in advances Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
EIGRP Network Design Solutions Book
Can anyone give some feedback as to whether this would be a good book to buy to futher my network design knowledge or could someone recommend a better book. EIGRP Network Design Solutions Author: Ivan Pepelnjak, CCIE SRP: $55.00 ISBN: 1578701651 Pages: 366 Pub Date: Oct 1999 Media: Web site Thanks Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2 questions
(1) If I have an address of 172.37.2.56/12 how would I work out the IP range , broadcast address ,subnet mask ,subnet address.? (2) What are the different config reg settings and what would they do ? e.g 0x2102 or 0X0101 Thanks in advance Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Password recovery on 2503 (IOS 11.2 (16) )
Please help me with the password recovery for a 2503 (IOS 11.2 (16) ) Thanks Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNA Exams
After how long do we need to rewrite the CCNA exam , and if you have done a CCNP after that what happens to you CCNA ? Cisco is changing the course track 1st August . If I write the 640-407 now do I need to rewrite again for the new track ? Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help - Cisco 1601
When ever I reboot the router I lose all my configs and the router enters initial config mode . I have wr mem all my configs before rebooting and I have checked everything .Please help Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]