RE: VPN Question [7:6307]
Most definately... the 1700 is a very popular model for branch office VPN connectivity. Regards, Trevor J Corness, CCNA Network Engineer, Advanced Data Communications BMS Communications Services Ltd. 6660 McMillan Way Richmond, British Columbia V6W 1J7 Phone:(604) 232-8800 Fax: (604) 232-8899 Direct: (604) 232-8815 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sam Sent: Tuesday, May 29, 2001 3:08 PM To: [EMAIL PROTECTED] Subject: VPN Question [7:6307] Is it possible to set up a site-to-site VPN between a PIX and a 1700 router? Our office uses a PIX firewall and we would like to connect a remote office that uses a 1700 router. Cost is a primary concern. Thanks FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6309t=6307 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OT (sort of) TAC Horror Stories
Try this one: Get call on Sunday morning, 8am -- woken up after going to sleep at 5:45am. Drive 50km to site, to find a port on a 2924XL is not forwarding traffic. Try another port, works okay. Phew. Try notebook on "faulty" port, won't forward traffic. Reboot switch. Won't forward traffic. Swap with onsite spare switch. Works. Remove switch to talk to TAC and get RMA replacement. 2 weeks of telephone tag, and "recreate the problem, in a way that we can troubleshoot this". Problem can not be recreated over 2 weeks.. all 24 ports tested a total of 12 times each. RMA REFUSED. Told to give the switch back to the customer, and reinstall it into a production network. The equipment plugged into that switch port? A PLC that controls an electronic industrial press, which if it doesn't recieve calls does not work; possible consequence: well, if someone gets an arm stuck in a moving part, lost limbs or even human death. The unit in question was even more reluctant to be serviced, because it replaced a 2924XL 6 weeks prior, that simply had 8 dead LEDs. A cosmetic problem, but was replaced nonetheless (along with 3 others at the same time from the same site). -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of J Roysdon Sent: Wednesday, January 31, 2001 10:09 PM To: [EMAIL PROTECTED] Subject: Re: OT (sort of) TAC Horror Stories Yeah, I've had experience with their Cache Engine team and found it lacking as well. Turns out an online banking customer using the box couldn't even use it as the CE500 won't work with https/SSL certificates (I believe that was the issue, might be a little off on my terminology). Too bad TAC didn't know that. The worst thing is that Cisco is the one who recommended the product without researching what it could do and that it wouldn't support the traffic they needed to pass (if nothing else, it slowed it down). -- Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "Rick Thompson" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have never had a problem with TAC that i can think of. Their cache engine support team is not that well experienced but they get the job done, just takes a little longer then with the RS groups. I have had a lot of failures with the 3548XL switches though. Bad GBIC and loose screws during shipment, sounds like we are seeing the same issues. The GBIC failures are usually the slot going bad not the module itself, they come in waves, 2-3 at a time every few months. But when it comes down to TAC, i can't complain. Now the QA people that see the products out the door, Cisco needs to do something there, new and rma. Rick Thompson --- "Erick B." [EMAIL PROTECTED] wrote: Hi, First of all, this isn't a problem with cisco TAC. They assisted you and dispatched hardware in a timely manner. This is a problem with damage during shipping or possibly defective units from the warehouse or supplier used. I don't work for them but do know sometimes that companies use other suppliers for RMA dispatches. Since you got 2 slightly-defective units in a row I would let TAC know about it nicely and ask them to pass it on to their RMA/logistics group so they can look into it. Give them the RMA #, case #, etc. --- Bob Johnson [EMAIL PROTECTED] wrote: Just curious about other peoples experiences with TAC on products "gone bad"... 1) Get call while almost in bed at 9:30 PM 2) 3548XL GigE interface goes down... 3) Restart and power cycle switch to no avail.. 4) Swap out GBIC and fiber patch with no more luck... 5) Call TAC, luckily equipment is on 7x24x4 SmartNet.. 6) Actually get new switch in 3.5 hours delivered to site.. 7) While configuring notice fan does not work... 8) Install anyways and call TAC again (luckly unit was near HVAC vent)... 9) TAC agrees to send another unit but have to wait till next afternoon.. 10) Replacement arrives but half it's ports don't enable after boot (the LEDs stay sort of yellow) 11) TAC agrees to send another but it will take (this was on a Friday) till Monday... 12) Get replacement.. 13) Pull out of box and hear a serious rattle (must be atleast two parts loose in chassis) 14) TAC agrees to send another unit but need 3 days to find one... 15) Unit finally shows up and actually works (and didn't rattle) I was lucky as the first unit worked (though it's fan did not) and did not over heat (mainly due to it's location)... Had there been cooling problems I would have yanked a fan off one of the other units (though as the part was not a "service item" TAC did not support such creativeness).. Just curious as to what anyone elses TAC horror stories have been like?
RE: CCDA after CCNA
#1: The course "ACRC" is now retired, and the exam is no longer available. The new course / exam is : BSCN (Building Scalable Cisco Networks) and the exam is called Routing 2.0. This is your first step usually into CCNP/CCDP after CCNA/CCDA. #2: Whether you want to gain Design-based certifications is up to you.. what kind of work do you do/want to do? Are you helping design / engineer / provision / upgrade internetworking gear? Then by all means, take the Design. I am finding that working for a Systems Integrator, that design opportunities are coming my way quite often. I have studied for this exam, just simply have not written the exam to get the paper. I have talked to my employer about possible benefits regarding this cert, and they seem very interested in me continuing my road to Cisco-dom.. as I am the only employee out of 6 technical datacom workers, and 200+ employees (mostly telecom and wireless cellular tower engineers) to be certified from Cisco. The final answer is, "IT DEPENDS". Depends on what you want for yourself, and for your employer. Regards, Trevor J Corness, CCNA MCSE MCP+I Network Systems Engineer, Advanced Data Communications BMS Communications Services Ltd, A LeBlanc-Royal Company Phone : (604) 232-8800Fax : (604) 232-8899 Service : (604) 232-Direct : (604) 232-8815 http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Un|tZ Sent: Tuesday, November 21, 2000 10:33 PM To: [EMAIL PROTECTED] Subject: CCDA after CCNA Hi Group, I just passed my CCNA test this week and i was just wondering if i should go and attempt CCDA or go for ACRC ? Do you think attempting CCDA would do me any good as in terms of advancing further at the workplace ? Or ACRC would be a wiser option.? Thanks in advance Dharmesh _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: WHIZZ KIDS WHO HAVE THE CCIE number
Though I can't comment on being certified at 12 or 13.. when I took my certification courses over the last year of my life, there were guys in the class who were 17 when we started, 18 when we finished.. we couldn't even all go for a beer after class, but that was cool. I considered doing my Cisco certs right after high school, back in 1997. I did 2 of my MCP classes while in grade 12.. Windows 95, and Windows NT Workstation. Quite honestly, I've been a big computer geek since I was 11 or 12. I was rejected by society for different reasons at a young age, unpopular even in Kindergarten, and found peace in the digital world at age 10 or 11. Every kid has a hobby.. at 12 mine was hockey cards and computers. The computers stuck with me. Now I'm 21, and still spend an amount of time on computers per day that most would consider unhealthy.. but it interests me, and to be honest, I love my job. Now, if only we could get rid of the suits and ties at my company... ;P This morning, I sat a 3 1/2 hour meeting with 10 reps from Nortel, going over the features of the Nortel Business Call Manager -- my company is trying to teach me about telecommunications, and I'm helping train the telecom guys on the data stuff, as BCM is a box that speaks OSPF, RIP, IP, H.323, and interfaces other stuff for VoIP, and gateways to the PSTN for failover, and PBXs. What the generation that follows me is going to learn, and what the 12 and 13 year olds are even already doing, just boggles my mind.. I ran a BBS at 13.. these kids are running webpages with hits from worldwide, and designing spectacular graphics.. or the other kids who are running little mini-LANs at home. I am moving into my cousin's basement suite, and have no doubt that my 13-year old cousin is going to pick up on my Cisco stuff no problem. So what? He also has a girlfriend, skateboards, plays hockey, and has tons of friends. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: William E Gragido Sent: Friday, October 13, 2000 11:58 AM Subject: RE: WHIZZ KIDS WHO HAVE THE CCIE number I have to agree at least to a certain point---adolescence and those great teenage years should be spent learning about yourself, others and academics. What ever happened to sneaking out of the house, dating and going to parties? -Original Message- From: NetEng Sent: Friday, October 13, 2000 10:41 AM Subject: Re: WHIZZ KIDS WHO HAVE THE CCIE number If your 12 or even 18 and trying to acheive any certification, your life must suck. What happened to having a childhood? I didn't know what I wanted to do until I was 20something. These kids should be forced to go to ChuckyCheese eveyday for a year. "Kris" wrote in message I commend young kids who attempt and more importantly achieve these things. Though at a young age I was actively involved in subjects taught in most first year university comp sci courses, I must say that it pales in comparisson to a 12 year old who is working towards CCIE. He is sponsored by Global Knowledge btw. Kris, From: "McCallum, Robert" [EMAIL PROTECTED] Subject: WHIZZ KIDS WHO HAVE THE CCIE number Here is a little poser for you all. Who is / was the youngest CCIE and what was his / her age when they attained the CCIE? Robert McCallum BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: why tokenring?
If anything, it has a lot to do with the fact that SNA is VERY time-critical.. it doesn't care how FAST a link is, but rather that it recieves its packets in a relatively predictable time period.. it doesn't like it to take 15ms for the first packet.. 33ms for the second.. 12ms for the third.. and 24ms for the fifth. Fluctuation an delay is DEADLY in an SNA environment. Since there is a set size of a ring, and a packet has to travel the ring regardless of whether there is a payload or not, delay fluctuates a lot less in a Token Ring environment. This is atleast my understanding between the logic behind using TR. If I am totally off base, feel free to correct me. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alldread AK2 Robert J Sent: Thursday, October 12, 2000 5:19 AM To: Cisco@Groupstudy. Com (E-mail) Subject: SNA: why tokenring? I am just curious as to why SNA still runs on tokenring today. Is there any reason that it cannot just hook right into an ethernet network?? I have read a few white papers on SNA, and I assume that because tokenring was the major LAN media back in the day, and because SNA uses RIF's to determine paths to other hosts, that SNA was built requiring the use of RIF's. Is this correct?? thanx, skin-e _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: books for ccda
This is really a question for the Associates list, but I'll answer it here, as I am not sure if you are signed up for the Associates list. I have been preparing for this exam, but am yet to actually sit the test. I have used both DCN, and Priscilla Oppenheimer's Top-Down Network Design. I have found both to be excellent sources of information, and plan to keep both on my bookshelf as bible-like references in the future. Also, I seem to remember Priscilla having flash cards on her site for prep for the CCDA exam (http://www.priscilla.com). Both very good books, I found Priscilla's writing style more bearable to read as a human trying to read it cover-to-cover. I found DCN to be a good insomnia-breaker, and reference guide for the concepts which I had a hard time grasping from Top-Down (not often, due to Priscilla's excellent explanations). I HAVE read both cover-to-cover.. and highly suggest taking the time to work through the case studies in the DCN book.. as I have heard there are a lot of scenario / case studie questions on the exam. I can not verify this personally, as I have not sat that one. For the DCN book, I have found pdf copies of it floating around on the net. I am not sure about the legality of this, but do a search on Cisco's website for it.. I believe it is usually called dcn.pdf -- I found this file a few days after my return period at Chapters expired.. so I was out the $90CDN it cost me.. OUCH. But well worth the money, if you prefer bound media. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Audio Kisei Sent: Tuesday, October 03, 2000 9:56 PM To: [EMAIL PROTECTED] Subject: books for ccda sorry to bother everyone. i'm sure this question has been asked numerous times but I'd like to take just one last poll before i go out and spend the $$. what are peoples thoughs on books/references for the ccda? lammle's old 441 guide? DCN? CCDA exam cert guide by kim/bruno? top down network design by oppenheimer? anyone's thoughts on a *combination* of these books you found helpful would be much appreciated. thanks again for your time, AK CCNA **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: Could someone help me !
There is a few things going on here. Everyone that has replied that I have seen so far, has missed a major thing. Source Port, and Destination Port swap for the return packet. Scenario #1, You want to browse a webpage. Your PC: 10.192.168.1 Web Server: 10.0.0.2 Your PC sends out a packet, this packet will look partially similiar to this layout: Source Address (Where it came from) : 10.192.168.1 Source TCP Port (Random number 1023) : 31000 Destination Address (Where it is going) : 10.0.0.2 Destination Port (Well-known service port) : 80 When this packet comes to the webserver, it looks.. "My IP Address? Yes. Port number? tcp/80. Do I know what that port is? Yes, pass it to Apache." Apache then looks, "Source 10.192.168.1, new session. Source port 31000." It adds : 10.192.168.1,31000 to a table of active connections, and preps a packet with the information requested. It will look like this: Source Address (Where it came from) : 10.0.0.2 Source TCP Port (Random number 1023) : 80 Destination Address (Where it is going) : 10.192.168.1 Destination Port (Well-known service port) : 31000 The packet is then sent through the network to your PC. Your PC looks at the packet, "For my IP? Yes. What port? tcp/31000. Do I know what that port is? Yes, I just sent a request in Netscape window #2 on that port to the source address of this packet." Pass it to Netscape, which opens the file. This process continues, allow with TCP ACK packets, since this is a tcp session, until that file is loaded. This is also done in several threads at once, to load your webpage faster. If this still confuses you, draw a picture on a big piece of paper.. two computers.. several arrows going left and right, and write it out visually. Just try to remember that for the scenario listed, your PC always uses tcp/31000 (only in this scenario, it is a random number between 1024-65536).. the webserver always uses tcp/80. Whether these numbers are "Source" or "Destination", depends on the direction of the arrow. 1 More attempt.. if the first didn't work. Think of it like an airplane flight, round trip. You have a source airport, and a destination airport. On the way home, they are swapped. Vancouver to Toronto: To Toronto, your ticket (packet) is like this: Source Airport (where I'm leaving) : YVR (just like an IP, it is unique) Source gate : Domestic, A30 Destination Airport (Where I'm going) : YYZ Destination gate : Domestic, I43 On the way home, for the sake of this example, your flight happens to use the same gates (since they do in a tcp session). This is a round trip ticket, so I'm not leaving from Vancouver, I'm going to Vancouver. Source Airport (where I'm leaving) : YYZ (just like an IP, it is unique) Source gate : Domestic, I43 Destination Airport (Where I'm going) : YVR Destination gate : Domestic, A30 Just an analogy to see if it helps.. some people get it, some don't. That's the way I thought of it at first, and now it's just second nature. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of RAUNIYAR RAJEEV Sent: Friday, September 29, 2000 1:05 PM To: [EMAIL PROTECTED] Subject: Could someone help me ! Hi all, now i DO have a question. i'm reading up about ports used by TCP/UDP protocols but im having trouble visualizing where the source port and destination ports fit in. im thinking that the destination port (suppose on a www, http segment) of 80, would be on the server from which we will download the data right? and we would specify a port (called source port) to which we want the data to come into our machine right? but then how would the www server distinguish between many sessions if their port is always port 80?? another example... suppose a college closes a "napster" port... can't you just log onto the napster server using a different port from your college? hmm.. i really confused. could you somehow help me visualize where these ports are in the network. and who sets them and how destination servers and clients differ etc.. thanks, BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: Napster Question
The list went through this several times already. Blocking ports , , , is useless.. since Beta6, Napster has been able to work on ANY port, INCLUDING 80.. so to kill Napster, you would have to kill all access to http/tcp80.. NOT good. Blocking the IPs is the best and most thorough solution at this time. Also, besides blocking the access to the main Napster sites will block most users, and for those that go around it, there should be a user policy in place. It is not totally your job to govern what the users do and do not do.. the users should also be held responsible. Put a political policy in place, and if it is broken by a user by using something such as opennap, discipline from management will solve this issue. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hal White Sent: Friday, September 29, 2000 11:55 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Napster Question Blocking these IP addresses will only block users from accessing the main napster servers and will not block access to other napster servers, such as, opennap, which can be found easily by using the napigator program. The best way to block Napster is to block the ports that the client uses which are ,,,. Don't quote me on these ports because I can't find my documentation at the moment, but I think they are right. Hal From: "Fowler, Joey" [EMAIL PROTECTED] Reply-To: "Fowler, Joey" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: RE: Napster Question Date: Fri, 29 Sep 2000 13:15:19 -0400 If you search the archives it has some info on this, but I just implemented it this morning and it seems to working here. If you are using PIX firewall (or any other) create an access list using the outbound and apply commands to block the following addresses: 208.184.216.0 /24 208.178.167.0 /24 208.178.163.61 208.184.175.130 208.184.175.131 208.184.175.132 208.184.175.134 208.49.239.242 208.49.239.247 208.49.239.248 People will start wandering by your desk asking if you've ever heard a program called Napster. I personally like to dumb. Joey -Original Message- From: Tom Pruneau [mailto:[EMAIL PROTECTED]] Sent: Friday, September 29, 2000 12:29 PM To: [EMAIL PROTECTED] Subject: Napster Question Greetings Group Does anyone know what ports Napster usies for handshaking? Inbound, outbound port number? What would it take to block Napster? Thanks Tom Pruneau Trainer Network Operations GENUITY 3 Van de Graff Drive Burlington Ma. 01803 24 Hr. Network Operations Center 800-436-8489 If you need to get a hold of me my hours are 7AM-3PM ET Mon-Fri --- This email is composed of 82% post consumer recycled data bits --- "Once in a while you get shown the light in the strangest of places if you look at it right" **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: TTY Lines
Simplest way to do this would be the following (note this isn't tested, but it should work: Since not setting a password for telnet disables telnet, simply try the following: en # conf t (conf)# line 0 4 (conf-line)# no password (conf-line)# end # So theoretically, to only allow 1 tty line, en # conf t (conf)# line 0 0 (conf-line)# password abcdefg (conf-line)# line 1 4 (conf-line)# no password (conf-line)# end # Like I said, this is untested, but should work fine (in theory). If anyone has time to test this out in a lab environment, let me know if anything works properly, or incorrectly. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Patrick Stiever Sent: Thursday, September 28, 2000 12:42 PM To: '[EMAIL PROTECTED]' Subject: TTY Lines Ladies and Gentlemen, Is there a way to shut down a TTY line like you would an ethernet interface? Thanks, Patrick Stiever CCNA Communications Engineer 24 Hour Fitness (760) 918 4459 [EMAIL PROTECTED] BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: CCDA summerization question
This is possibly one of those situations with just a poorly worded question. Now, to nit-pick at the wording.. "The following IP *ADDRESSES*" -- Addresses, not networks, but ADDRESSES.. Now, is this VLSM summarization, in which case "no bits in the 3rd octet" without doing 2 summaries (50% savings on the routing table traffic, but why when you could 172.16/16 for 75% savings). The other possibility, is (I do this occassionally on firewall rules setups) summarizing for an access list. In other words, "What is an IP/mask combination that will match those 4 addresses." The answer would be : 172.16.0.0 = 172.16..0 172.16.64.0 = 172.16.0100.0 172.16.128.0 = 172.16.1000.0 172.16.192.0 = 172.16.1100.0 Remember that the mask in an access-list etc, does NOT need to be contiguous bits.. therefor : 172.16.0.0 0.0.192.255 (172.16.xx00.x) works fine for those specific addresses (and added feature, doesn't include anything else). Just another point of view to look at this question from. Remember that while writing a Cisco exam, or out in the real world, ASSUME NOTHING. If it does not mention VLSM, don't assume they are talking about VLSM. If possible, check on what the exam says is the "correct" answer, and try to reverse-engineer their thinking to see what topic they are covering. Also, check the erratta for the exam to make sure you are looking at a "correct" answer. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com "John lay" [EMAIL PROTECTED] wrote in message Guys, While studying for the CCDA, I found the following question in one of the exam preparation sites. The following IP addresses can be summaried by which bit of the 3rd octet 172.16.0.0, 172.16.64.0, 172.16.128.0, 172.16.192.0 --- 1st bit, first 2 bit, first 4 bit, last 6 bit I don't think that the following addresses could be summarized on any bit of the 3rd octet. If you have a look to the 3rd octet 172.16.0.0 --- 172.16..0 172.16.64.0 --- 172.16.0100.0 172.16.128.0--- 172.16.1000.0 172.16.192.0--- 172.16.1100.0 Could someone verify this with me guys ? Thanks a lot BEGIN:VCARD VERSION:2.1 N:Corness;Trevor FN:Trevor Corness ORG:BMS Communications;DataCom TITLE:Network Systems Engineer TEL;PAGER;VOICE:604-631-7867 ADR;WORK:;;2880 Production Way;Burnaby;BC;V5A4T6;Canada LABEL;WORK;ENCODING=QUOTED-PRINTABLE:2880 Production Way=0D=0ABurnaby, BC V5A4T6=0D=0ACanada URL: URL:http://www.bmscom.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:2921T155409Z END:VCARD
RE: they want us in England!!
Congratulations, Sam! I myself landed my first real networking job yesterday. I had IBM Canada and BMS Communications fighting over me for 24 hours. IBM took a month to get back to me, I interviewed with BMS Monday and Tuesday.. Tuesday afternoon I had the offer (2 hours after IBM called, but I purposely took my 24hrs to choose). 6 months, and 7 companies interviewed later, I'm a Network Systems Engineer.. a fancy title for a guy that goes on-site for NT, Cisco, Nortel, Unix support, and does some network design along with presentations with our sales team. I start October 2nd. England is a place I would like to go later in my career, possibly 5 years from now, but I'm just kind of starting out here. My family is from back there, and I've always wanted to go see all of England, Ireland, and Scotland.. along with the rest of Europe of course, only seen Barcelona, Spain up until now. Best of luck in the new job, and drop by from time to time to check on us. Regards, Trevor Corness, CCNA MCSE MCP+I Network Systems Engineer, DataCom BMS Communications Ltd. http://www.bmscom.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sam Fraser Sent: Tuesday, September 19, 2000 4:24 PM To: [EMAIL PROTECTED] Subject: they want us in England!! I got a job!! This is Sam the CCNA with a 946 score and couldn't get even an interview never mind a job! I decided to start looking for jobs in the South of England. Got an interview straight away, ... and, got the job straight away! They were aghast! at my knowledge. I knew I had the job before I left the interview room. You see, experience isn't everything. Global Crossing will not regret taking me on, I will prove my worth!! A BIG THANK YOU to all those from this newsgroup that helped me during my studies. Bye From Sam **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
netbios, whats it good for?
Was not I, for I have yet to run a network with AppleTalk on it.. though, I did some sniffing on a contract, with 8 G4's on site, as well as about 45 WinNT4 machines.. and let me tell you, for a dotcom, there was a LOT of useless NetBIOS traffic going on.. and very negligible amount of native AppleTalk traffic. Actually considering buying a G4 Cube for a toy :) Regards, Trevor Corness, CCNA MCSE MCP+Internet A+ Primary, SecureNet Central -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Priscilla Oppenheimer Sent: September 6, 2000 6:21 PM To: [EMAIL PROTECTED] Subject: Re: netbios, whats it good for? And who said AppleTalk was chatty? Someone who had never used a Sniffer to watch a PC running NetBIOS for Microsoft networking. ;-) Priscilla At 08:38 PM 9/6/00, David Williams wrote: Netbios: access vs. excess. You decide. "beth shriver" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I was recently reading through one of laura chappels pod books that suggested netbios was not a good thing to have too much on the network. I just recently took a look at my network and i see a TON of it flying around! capturenet shows:tcp-NETBIOS-SSN can you tell me what this netbios would be good for and if nothing how do i get rid of it? thanks Beth **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Linux Proxy server and 1700 using NAT
Yes, definately. Don't run NAT on the Router, only use it on the Linux box.
I assume you have a LAN of a few (or more) PCs on the other side of the
Linux box. You will need a cross-over UTP cable (best solution) and then
set it up similiar to this :
Internal PCs (2, 10, 50, 2000)
||
Ethernet/FE Switch
|
Linux Internal NIC1 (Inside address)
Linux PC
Linux External NIC2 (Outside address)
X (cross-over cable)
X
Eth 0
1720 Router
WIC 0 WIC 1
I I
I I
PSTNPSTN
Basically, use a switch/hub with your internal PCs hooked up in a LAN
configuration. Plug the Inside IP NIC of the Linux box into that
hub/switch. This completes your internal network.
Use a crossover cable to connect your Outside (Live) IP NIC to the E0 of the
1720 router. This is a separate cable segment, with 2 nodes.. E0, and the
NIC (xl1 or whatever).
As usual, have your 2 WICs connecting the PSTN as they do now.
This is best, as the Linux box now also segments all the broadcast traffic
and "crap" from the LAN side, and blocks that traffic from "sneaking" out
into the "real" world. I have done this several times in the past, and it
works fine.
Regards,
Trevor Corness, CCNA MCSE MCP+Internet
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Shane Stockman
Sent: September 9, 2000 1:43 PM
To: [EMAIL PROTECTED]
Subject: Linux Proxy server and 1700 using NAT
I have a cisco 1720 with 2xISDN WIC cards and a Linux Proxy Server with
2xNIC's. I need to know whether I can use 1 nic for the internal address and
another for the global addresse's given by the ISP using only one ethernet
port of the 1720.
-Proxy--NIC1(Internal) -Router-ISDN WIC 0---|--PSTN
-Server-NIC2(Outside )-Eth0---ISDN WIC 1---|
Sorry for the sketch
I also need to connect the Proxy to a 2924 for 8 users
Is this possible ?
Any Solution
Thanks
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: urgent: How to block ICQ on PIX server
What you captured, was the interaction packets, between users. What you need to do, is close TCP Port 5190, which is the port used initially during login. For more information about how to stop certain services on your PIX (and I might also ask why you aren't blocking all, and only allowing specific traffic (are you block Napster, for instance?). Try to look at the service's homepage, it usually information for firewall administrators. I know for a fact that this is true in terms of the Mirabilis ICQ product. Regards, Trevor Corness, CCNA Primary, SecureNet Central -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of truename Sent: August 24, 2000 7:53 PM To: [EMAIL PROTECTED] Subject: urgent: How to block ICQ on PIX server Hello, How can I block the ICQ use on PIX server? I captured the packets ICQ generating, found that port they are using is UDP 4000, and UDP 8000. I used the command "conduit deny udp any eq 4000 any" and command "conduit deny udp any eq 8000 any", but users still can user ICQ software. I really have no idea. Can you help me? thanks, cai, land ___ ÍøÒ×[µçÄԽ̳Ì] ÄÚÈݳ¬È« ÏÂÔØ¡¢½âÒÉ¡¢Ñ§Ï°Ó¦Óо¡ÓÐ http://school.163.com ÍøÒ×ÐÂÎÅƵµÀ£¬²»µ«Ð£¬¸üÒªupdateÄúµÄÅжÏÁ¦£¡ http://news.163.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what criteria does a access-list use when a there is a contradiction?
IP Access-Lists, or rather Cisco Access-lists in general, are parsed from top to bottom, until a match is found. The criteria used, is "first match". Given your examples: ip access-list 10 deny host 192.168.1.19 ip access-list 10 permit any A packet comes to the list from 10.0.0.1 -- first line is read, it is not from 192.168.1.19.. no match. So the next line is read. The packet is permitted. Same list, but a packet enters from 192.168.1.19 -- first line is read, it IS from 192.168.1.19.. it matches. Packet denied, dumped in the bit bucket, end of story. The next line is never looked at. This is why the order of your rules in the access-list is important.. as is the placement of the list. Regards, Trevor Corness, MCSE MCP+I CCNA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Clay Stuckey Sent: August 23, 2000 8:25 AM To: Group Study Subject: what criteria does a access-list use when a there is a contradiction? more specifically with the following: ip access-list 10 deny host 192.168.1.19 ip access-list 10 permit any ip access-group 10 in I was recently told that the last line overrides any previous command. According to the Transcender info, the most restrictive security would be taken. How bout something as obvious as this: ip access-list 10 deny host 192.168.1.19 ip access-list 10 permit host 192.168.1.19 ip access-group 10 in Thanks, Clay Stuckey - MCSE for my resume, go to http://24.17.223.89/clay/clayres3.doc ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ACRC Vs. BSCN
take a look at the objectives on Cisco's site. In class, our instructor told us the major differences. This is from memory, so I might miss something. More : BGP, EIGRP, OSPF, Redistribution Removed : IPX, ISDN DDR, Bridging, Spanning-Tree (all covered in ICND) Basically, it's more indepth routing, with all the switching/bridging taken out, and concentrating on IP. Regards, Trevor Corness, CCNA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of EEIEOL Sent: Tuesday, July 18, 2000 10:27 AM To: [EMAIL PROTECTED] Subject: ACRC Vs. BSCN A Chairde, I have been studying for ACRC, but due to travel commitments will not be able to complete exam by 31 July deadline.I will study BSCN instead .I was wondering if anyone knows are these exams much different, or basically on the same lines, OSPF,EIGRP,ISDN etc Thanks in advance, Slan / Ed ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: denied telent access
Could be many different things.. can he telnet in when he "disconnects and reconnects the router" -- which btw, involved what? Disconnecting power, ethernet, a WAN link?? If telnet access to telnet never works, or only for a split second, I would console in and check for access-lists both extended and standard on all interfaces (you try to telnet in through another interface?), as well as on the line vty 0 4 ports. Also, make sure there is a telnet password.. no telnet terminal password, no telnet. Regards, Trevor Corness, CCNA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Fred Flinstone Sent: Friday, July 14, 2000 2:25 PM To: [EMAIL PROTECTED] Subject: denied telent access I've come across a situation at work.. there is a customer that shows as down in NETSYS, we are unable to telnet in the router..however we are able to go in out of band and all the interfaces are shown as up. The customer states that when he "disconnects and reconnects the router" the problem is temporaily fixed. What is the problem here? Is it an extended ip access list problem or something else?? Thanks Kyle Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA, but it isn't helping...
I agree with Oz's response.. you should take the Win2000 rollout, and plug around a little.. talk to people.. network PEOPLE, and create contacts. They may help you sometime down the road. It is a tight community, you never know when you're going to run into someone again, probably on the job. Don't burn bridges in this industry, build them. Myself, I'm JUST starting out (NO real world experience). I interviewed this morning with a VERY young startup here in Vancouver (their webpage only went LIVE yesterday morning, with a v1.0 final product). From what was said, it seems if I get the position, I'll start out in Tech Support Helpdesk kind of stuff, but grow to LAN Server and Router/Switch Admin. Maybe look to find a startup like this in your area (Vancouver is full of them, as are other hightech booming places), they offer a great opportunity to move around, and build that Network Admin resume up quickly (plus the stock options are always nice G) Take the rollout of Win2K, and meet people in the field.. ask them how they got started.. let them know you are looking. They may just give you a call someday, when they are looking for someone. This industry is 10% what you know, 90% who you know. So get out there, and learn some names and people! Regards, Trevor Corness, MCP+Internet MCSE CCNA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Friday, June 09, 2000 1:12 AM To: [EMAIL PROTECTED] Subject: CCNA, but it isn't helping... Hey Group, Sorry to bother you on this non-technical question. We all know that when you send your resume out to companies that are asking for cisco professionals, that they want someone with experience. I have been in the IT field for about 2 years (rookie) doing deskside. I decided to start on the Cisco side of things and recently obtained my CCNA. I am now going for my CCDA and so on... My question is, if all of these companies are looking for experience, then how do I get started on getting it if nobody will hire just a certification? Don't get me wrong, I know my stuff, and at a recent interview I answered all of the tech. questions to a T. I am starting to doubt myself and am actually, probably, going to sign a contract for a windows2000 rollout. I don't mind doing this because it will put Win2000 on my resume but I was kinda hoping to start off in a new direction (cisco). Should I just keep on studying for higher cert.'s and just hope I get a lucky break, and is that what it's all about...a lucky break? Thanks for the help group...any comments are appreciated. Mark Zabludovsky ~ CCNA Home: (215) 340-1440 A HREF="mailto: [EMAIL PROTECTED]"[EMAIL PROTECTED]/A ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE (ScanMail Checked: Virus Free!)
The CCIE # started at 1025, so in generality: # of CCIE's = CCIE # - 1024 +/- probably 20 or 30 The number is assigned to the testing center in blocks, so it is not totally contiguous.. It does give a good estimate though. eg. I believe Joe's # 5917 (just confirmed, checked an email from him ;p) so.. at his time of certification, x = 5917 - 1024 +/- 25 x = 4893 +/- 25 x = ~4868 - 4918, somewhere around that range. Someone correct me if I'm wrong, but this is the way I understand it.. the +/- 20-30 is only a guess on my part for the "pool" of CCIE #'s not yet assigned at other stations. Regards, Trevor Corness, CCNA MCSE MCP+Internet -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, June 07, 2000 10:26 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: CCIE (ScanMail Checked: Virus Free!) Just curious does anyone know what the CCIE number is up to?...meaning how mant CCIE's are out there? I guess it's around where Joe Martin is. # 59xx thereabouts. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: New CCNP v.2!!!
www.priscilla.com
look around there, it belongs to groupstudy member, and kickass author,
Priscilla Oppenheimer. She wrote Top-Down Network Design, for CiscoPress..
a definate read, even for people not pursuing a career in Design or
CCDA/CCDP certification.. just lets you understand better what is going on
in the world you create/work in.
http://www2.priscilla.com/priscilla/cit/toc.html
This is a direct link to the "Flash Cards", designed for the CIT candidate.
Regards,
Trevor Corness, MCP+Internet MCSE CCNA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sammi
Sent: Saturday, June 03, 2000 4:28 PM
To: [EMAIL PROTECTED]
Subject: Re: New CCNP v.2!!!
On 3 Jun 2000 18:30:49 -0400, [EMAIL PROTECTED]
("McMasters, Eric") wrote:
used the flash cards at
Priscilla's site to brush up,
Could you provide a link to the site please?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Another CCDA Passed
What did you use to study? So far, I've gotten CCNA 1.0 and 2.0 materials behind me, and the CCNA 1.0 exam passed, in addition to : Top-Down Network Design, Priscilla Oppenheimer (CiscoPress - a DEFINATE read for ANYONE.. just an all-round good book - good job, Priscilla.. when's your next book coming out? ;p) Designing Cisco Networks, CiscoPress IP Routing Fundamentals, CiscoPress working now on Advanced Cisco Router Configuration (ACRC), CiscoPress Just wondering how much of the material is covered in DCN, and Top-Down, if you've read them.. no specifics needed, just "are those enough, or do you suggest another, is so, which?" Regards, Trevor Corness, MCP+Internet MCSE CCNA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Stephen Hoover Sent: Wednesday, May 31, 2000 5:32 PM To: [EMAIL PROTECTED] Subject: Another CCDA Passed Just got back from passing my CCDA as well :) I didn't get any fill in the blank questions, and the multiple choice questions were a breeze. I had just the opposite experience with the case studies - the questions I was asked about them seemed VERY vague in contrast to the questions in the Sybex and Boson practice exams. There were at least two questions I got over the case studies that I SWEAR the info was not in the case studies as the question stated - maybe I was just tired. 891 out of 761 - I'll take it. Stephen Dallas, Texas ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA 1.0 vs CCNA 2.0
Moving to CCNP 2.0 should not be a big problem.. may require a tiny bit of reading before taking a new course, but nothing too major. Cisco does support, and allow this scenario. As for disadvantages, is the possibility of rewriting sooner than if you took the CCNA 2.0 exam, though nobody really knows what Cisco is going to do about this.. CCNA 1.0 certification will be valid for some time to come, though.. not like M$ making you upgrade within a week or something ;p Regards, Trevor Corness, MCP+Internet MCSE CCNA (soon to just be CCNA, thank you, Microsoft) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Namal Perera Sent: Wednesday, May 31, 2000 1:56 AM To: Cisco@Groupstudy. Com (E-mail) Subject: CCNA 1.0 vs CCNA 2.0 Hi All, I need advise. I have prepared myself for the CCNA 1.0 and plans to sit for the exam on 22nd June 2000. If I do CCNA 1.0 will I have to resit for the CCNA 2.0 exam or can I continue with CCNP 2.0. What is the disadvantage of doing CCNA 1.0 now that CCNA 2.0 is out. Cordial regards, Namal Perera ITQAN - Al Bawardi Computers Tel. : 9712 6730202 Fax : 9712 6730323 P.O.Box : 4118 Abu Dhabi, UAE Email : [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: the way to ccnd
For CCDP (Design Professional) status, you will be required to complete your CCDA, as well as the CID exam, in addition to the requirements for CCNP (CIT not required). So you would be required to pass both the DCN (Designing Cisco Networks) exam, as well as CID (Cisco Internetwork Design) exam.. either by sitting the courses (I believe DCN is 3 days), or self-study, or whatever your method may be. Trevor Corness, MCP+Internet MCSE CCNA(as of Tues May 23, 2000 -- thanks to this list) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Brueckmann, Armin Sent: Thursday, May 25, 2000 11:38 PM To: [EMAIL PROTECTED] Subject: the way to ccnd moin in sone weeks i hope to be an ccnp. is is posible to get an ccnd only by making the cid course/ test, or did i have to make the ccda too? mit freundlichem Gruß Armin Brückmann ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNP 2.0
http://www.cisco.com/warp/public/10/wwtraining/certprog/lan/programs/ccnp.ht ml (watch the wrap) note the pre-req for CCNP 2.0 track is CCNA 1.0 OR 2.0. Not both, Not just 2.0. Your CCNA cert level doesn't effect your CCNP version #. If you mix exams though, (say, ACRC, CLSC, BCRAN, CIT).. you will be CCNP 1.0. But CCNA 1.0, CCNP 2.0, is a possible combination, by doing all the 2.0 track exams for the CCNP level. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Danny Wu Sent: Wednesday, May 17, 2000 10:11 PM To: [EMAIL PROTECTED] Subject: CCNP 2.0 Hi, all: I am holding the CCNA 1.0 Now. Can I go for the CCNP 2.0 without the CCNA 2.0? Thanks Dan ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
