RE: udld [7:73730]
All the time. It is our standard to run udld in agressive mode. Jim -Original Message- From: Lopez, Robert [mailto:[EMAIL PROTECTED] Sent: Friday, August 08, 2003 10:00 AM To: [EMAIL PROTECTED] Subject: udld [7:73730] Anyone out there make it a common practice to implement UDLD on Cat 6509 GigE uplinks? TIA, Robert LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately. **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73750&t=73730 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Looking for CCIE Study Partner(s) in MA and NH [7:73360]
Hey, Looking for CCIE study partner(s) in northern Massachusetts and/or southern New Hampshire. Please contact me offline. Thanks, Jim **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73389&t=73360 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Looking for CCIE Study Partner(s) in MA and NH [7:73360]
Hey, Looking for CCIE study partner(s) in northern Massachusetts and/or southern New Hampshire. Please contact me offline. Thanks, Jim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73360&t=73360 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com
RE: 6500 10/100 line card COIL numbering [7:73194]
Dave, Blade 3 is bad. Open a TAC case, if you have support, and get the blade replaced. Jim -Original Message- From: MADMAN [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 29, 2003 3:49 PM To: [EMAIL PROTECTED] Subject: 6500 10/100 line card COIL numbering [7:73194] Hi, I have a customer whose 6500 switch seing this error: %SYS-3-SYS_LCPERR3:Module 3: Coil 1 Port 7: stuck 3 Does anyone know if the COILs start with number 0 or 1? I know there is 1 COIL per 12 ports and 1 Pinnacle ASIC per 4 COILs bt I can not find anywhere how the COILs are numbered. I am trying to identify the suspect ports but can't find the numbering scheme anywhere!! Thanks Dave -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73236&t=73194 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE required in UAE. [7:72879]
That is only $2118.51 a month? -Original Message- From: afshin mehrpouya [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 1:24 AM To: [EMAIL PROTECTED] Subject: CCIE required in UAE. [7:72879] CCIE required in UAE-Dubai for an international solution provider company. Min salary 2 derhems/month. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72933&t=72879 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: We (Cisco mailing list) are moving ... [7:72060]
Paul, Can we help you out with this great service you are providing to us by making a small donation? I know I'm not alone when I say that your service has been invaluable to us in the Ciscos of the world. Thanks, Jim -Original Message- From: Paul Borghese [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 09, 2003 12:29 PM To: [EMAIL PROTECTED] Subject: We (Cisco mailing list) are moving ... [7:72060] Hey Everyone, We will be moving the mailing list function to a new server. If you are currently receiving this list via e-mail, you will be affected. This has been planned for some time now but we need to move faster then I would like. I just received a bill from our co-location facility for the GroupStudy service and let's just put it this way, in most locations rent on a two bedroom apartment is less expensive. So we need to try and reduce our bandwidth usage (an eventually find another co-location facility). It has been quite clear for some time now that the GroupStudy server needs help. We are dropping an unacceptable number of messages (I personally have had five in a row discarded) and the messages that make it take a random amount of time to propagate. To fix this, I have purchased a new server and bandwidth (at a lower cost facility). We will be migrating to the new server in the next few days. Once the move is complete we will cut over to the new server. But wait it gets better .. We are dumping majordomo as our list software! Our new software will allow you to change a number of options. For example you will be able to suspend distribution of the e-mails, receive e-mails in digest format, change your e-mail address, etc. You will receive a welcome message with your account information. The message will contain your username/password, instructions on how to login to the server, and instructions on how to unsubscribe. Please save this e-mail for future reference. It is also a good idea to login to the server and set your password to something more memorable then the random password given. If you stop receiving e-mails from the list after the change, please send me an e-mail (after verifying it is not a problem at your end such as misconfigured anti-spam software etc.). Take care, Paul Borghese Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72148&t=72060 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: No output on "show run" [7:70461]
Hi, Can you post the out of 'sh proc mem'? Thanks, _ Jim Walker Network Engineer (617) 732-8803 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2003 11:29 AM To: [EMAIL PROTECTED] Subject: No output on "show run" [7:70461] Hi all, I have an issue on a 7200 where it appears that I am running out of memory although none of the show outputs that I have seen tell me that. When I try to issue the "show run" nothing happens, I get no output. If I try to copy start run it gives me the following error: Router#sh run Router#copy start run Destination filename [running-config]? %Error opening system:/running-config (Not enough space) Router# I was thinking that perhaps this configuration is to large and it needs to be compressed. Perhaps I need to use the command "service compress-config" but not quite sure since all this is doing is compressing the NVRAM portion. I dont think that that is where my problem is but I could be wrong, please explain. Could someone explain to me what causes this to occur and how to fix it (besides a reboot). Here is the output of the "show version". Router#sh ver Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-IO3S-M), Version 12.2(2)T, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Sun 03-Jun-01 04:30 by ccai Image text-base: 0x600089C0, data-base: 0x6149E000 ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT SOFTWARE BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Router uptime is 18 hours, 30 minutes System returned to ROM by power-on System restarted at 15:09:19 cdt Mon Jun 9 2003 System image file is "slot0:c7200-io3s-mz.122-2.T.bin" cisco 7206VXR (NPE300) processor (revision D) with 122880K/40960K bytes of memory. Processor board ID 20394201 R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache 6 slot VXR midplane, Version 2.0 Last reset from power-on Bridging software. X.25 software, Version 3.0.0. 2 FastEthernet/IEEE 802.3 interface(s) 10 ATM network interface(s) 125K bytes of non-volatile configuration memory. 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 4096K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x102 Router#sh run Router#copy start run Destination filename [running-config]? %Error opening system:/running-config (Not enough space) Router# Thanks, Mario Puras SoluNet Technical Support Mailto: [EMAIL PROTECTED] Direct: (321) 309-1410 888.449.5766 (USA) / 888.SOLUNET (Canada) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70466&t=70461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Recert CCNA [7:70459]
Few months is enough time to get your CCNP, depending where you stand with understanding the technology and hands on. Don't waste your time with CCNA. Just my 2 cents. Jim -Original Message- From: Steve Smith [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2003 11:12 AM To: [EMAIL PROTECTED] Subject: Recert CCNA [7:70459] Hey Gang has anyone taken the 607 test? If so what are the best books to study with? My CCNA runs out in a few months so it's back to the books. Thanks, Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70465&t=70459 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: direway dsl via satelite and the vpn [7:64390]
Dave, Satellite is not DSL and DSL is not satellite. I think that was a typo. :) I have a Direcway Satellite System and the ONLY WAY I got the VPN to work is 1. Not launching the VPN from the computer that is directly connected to the satellite rcvr/trans box, because it does not work!!! 2. Loaded Windows XP and bridged the USB and the NIC 3. Configured the NIC with an IP address and mask 4. Installed a switch, you can use a hub, and connected up the computer 5. Connected my laptop to the switch 6. Configured the NIC on my laptop to be on the same network as the computer and used it as your gateway Good luck, Jim -Original Message- From: DJ W [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 04, 2003 3:40 PM To: [EMAIL PROTECTED] Subject: direway dsl via satelite and the vpn [7:64390] I am trying to find anyone who has successfully configured the windows checkpoint vpn client accessing a citrix site over a direcway satelite dsl. When I run the client, it appears as though we lose the connection to the internet. Direcway and Checkpoint are baffled and claim to have never heard about the issue. Any constructive input is welcome! Dave Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64394&t=64390 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Looking for Northern MA or Southern NH Study Partner or Group [7:63367]
Hi, I'm looking for a study partner for CCIE R&S lab. I leave in NH but work in Boston. Please contact me off line. Thanks, Jim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63367&t=63367 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: flapping of trunk ports (trunk non-trunk) [7:62951]
I have seen this problem before. Basically you have a layer 1 problem thus, your fiber. Some possible problems to look at: 1. Is your fiber longer than IEEE standard? With GBIC-SX, 550m for multi-mode With GBIC-LH, 300m for multi-mode With GBIC-LH with modal cable, 550m for multi-mode With GBIC-LH, 5K for single mode My guess is you are using MM with SX GBICs and you have patch panels in the middle of you run and you are also using fiber patch cords. Look for loose or bad ends, dust lint between your patches, and/or even a bad run. Hope this helps. Jim P.S. Sei in Italia? Di dove? - Original Message - From: "Luca Ciasca" To: Sent: Thursday, February 13, 2003 4:37 AM Subject: flapping of trunk ports (trunk non-trunk) [7:62951] > Hi all, > > Is there anyone who have suggestion for this problem: > > in my catalyst 6500 I have a lot of message like this, even 60 for day: > > Switch_1> (enable) 04/21/1998,03:15:40:DTP-5:Port 1/1 has become non-trunk > > Switch_1> (enable) 04/21/1998,03:15:41:DTP-5:Port 1/1 has become trunk > > I specify that: > > 1) both of the ends of this link are in "trunk on" mode (no auto, no > desirable) > 2) The fiber seems OK, indeed I have actived the UDLD in aggressive mode for > this link and the stase is still: "bidirectional" > 3) both of the ends of this link have "dot1q" encapsulation > > I have read that a valid workaroud is to migrate from the "on" mode to > "nonegotiate" mode, but I don't want that this just hide the problem, > without solving it. > > Any suggestion? > > Thanks > > Luca [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63021&t=62951 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Simple Ip issue (need help) [7:62728]
Only problem is which side are you pinging -Original Message- From: John Murphy [mailto:[EMAIL PROTECTED]] Sent: Monday, February 10, 2003 11:15 AM To: [EMAIL PROTECTED] Subject: Re: Simple Ip issue (need help) [7:62728] If you're asking what I think you're asking, then I think your answer is yes, but you won't be able to pass any traffic across the circuit. Unless you've confused me (it doesn't seem I would be the only one), then the answer might not be the same. - Original Message - From: "Monu Sekhon" To: Sent: Monday, February 10, 2003 12:13 AM Subject: Simple Ip issue (need help) [7:62728] > Hi All, > I have very simple question, Can we use duplicate ips on serial interfaces > among them seleves although we cannot use duplicate ip on serial with > Ethernet(lan interface) or loopback interface. > > > My topology is like this > > Client router server router(connected back to back) > 2 interfaces 2 inetrfaces > > > these routers connected back to back > > > configuration > int serial 0/0 > encap hdlc > ip address 1.1.1.1 255.255.255.0 > > int serial 0/1 > ip address 1.1.1.1 255.255.255.0 > encap hdlc > > > > now if all the two interfaces of serial even if given duplicate ip among > themselves works fine. no error from cli .interfaces are up > and i am able to ping remote side. > > > > The ques is that > > 1) Lan interface also was in different subnet but serial interface > doesnot accept that ips as duplicate or of loopback > > 2)What Implication such have on my design ,any limitation it has > > Does this type of design can be used, > > This is small thing is confusing me about ip. > > Thanx in advance Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62760&t=62728 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: why con 0 password doesn't work?? [7:59938]
Don't use 7 on the password line. You also need a 'login' command. Line con 0 Password xxx login -Original Message- From: Richard Campbell [mailto:[EMAIL PROTECTED]] Sent: Monday, December 30, 2002 12:00 AM To: [EMAIL PROTECTED] Subject: why con 0 password doesn't work?? [7:59938] Hi.. Dear Group, I would like to know why console password doesn't work. I key in my console password in the following manner. But when I plug in the console, it straight away give me a switch> prompt. Why it never prompt me passord before showing us switch> line con 0 password 7 XXX Thanks a lot _ The new MSN 8: smart spam protection and 3 months FREE*. http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=7474&SU = http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_smartspamprotec tion_3mf Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59957&t=59938 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 4500 Series Router [7:59806]
On the 4500, I can only get to rommon state. I cannot use show nor the format commands. It is using the boot rom image, 5.3(16). There has to be a way using the set command. Thanks, Jim -Original Message- From: Mark W. Odette II [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 26, 2002 7:10 PM To: [EMAIL PROTECTED] Subject: RE: 4500 Series Router [7:59806] Jim, Based upon 12.1 IOS... See CCO for docs on how to copy a replacement image onto the router.. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ fun_c/fcprt2/fcd203.htm You obviously have local access to the device, as assumed by the output you have posted; from the console session, check the boot parameters with a "SHOW BOOTVAR". If you are sure the flash memory is not damaged, then I would format the flash, and then tftp a new copy of the IOS image onto it. See CCO for information on setting the boot variable. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ fun_c/fcprt2/fcd205.htm#xtocid2 HTHs, Mark -Original Message----- From: Walker, James - Is [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 26, 2002 4:33 PM To: [EMAIL PROTECTED] Subject: 4500 Series Router [7:59806] All, Anyone know how to recover from a empty flash on a 4500 series router? I'm getting the following message: device does not contain a valid magic number boot: cannot open "bootflash:" an alternate boot helper program is not specified (monitor variable "BOOTLDR" is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load "cisco2-C4500" I combed the CCO, no luck. TIA Jim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59831&t=59806 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
4500 Series Router [7:59806]
All, Anyone know how to recover from a empty flash on a 4500 series router? I'm getting the following message: device does not contain a valid magic number boot: cannot open "bootflash:" an alternate boot helper program is not specified (monitor variable "BOOTLDR" is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load "cisco2-C4500" I combed the CCO, no luck. TIA Jim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59806&t=59806 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: help [7:59112]
Can you send me your configuration with out passwords off line? -Original Message- From: Brian Zeitz [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 12, 2002 3:29 PM To: [EMAIL PROTECTED] Subject: RE: help [7:59112] Me = dumb :O OK thanks, I was confused with my default gateway. Another command I forget is dialer-list 1 protocol ip permit I can ping my ISP's DNS now, but I can't ping any websites and I cant ping my LAN interface from the internet. I tried the name-server command with no luck. -Original Message- From: Brian Zeitz Sent: Thursday, December 12, 2002 2:20 PM To: [EMAIL PROTECTED] Subject: RE: help [7:59112] 146 was assigned by the ISP -Original Message----- From: Walker, James - Is [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 12, 2002 2:15 PM To: Brian Zeitz; [EMAIL PROTECTED] Subject: RE: help [7:59112] Try: interface Serial2/0 ip address 12.124.201.145 255.255.255.252 -Original Message- From: Brian Zeitz [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 12, 2002 1:50 PM To: [EMAIL PROTECTED] Subject: help [7:59112] Router Setup This may be a very simple question, but I set up my router and I cannot access the internet. Here is the configuration file. I tried the command IP Route 0.0.0.0 0.0.0.0 x.x.x.x as well, with no luck. Sigh Also does anyone have any links for configuration PDF for 3600 routers? version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! enable secret 5 _/ enable password ! ip subnet-zero ! ! ip name-server 12.127.17.72 ! ! ! ! interface Ethernet0/0 ip address 12.104.49.161 255.255.255.224 no ip mroute-cache half-duplex ! interface Ethernet0/1 no ip address no ip mroute-cache shutdown half-duplex ! interface Ethernet0/2 no ip address no ip mroute-cache shutdown half-duplex ! interface Ethernet0/3 no ip address no ip mroute-cache shutdown half-duplex ! interface Serial2/0 bandwidth 1544000 ip address 12.124.201.146 255.255.255.252 encapsulation ppp no ip mroute-cache ! ip default-gateway 12.104.49.161 ip classless ip http server ip pim bidir-enable ! ! line con 0 line aux 0 line vty 0 4 password login ! end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59130&t=59112 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: help [7:59112]
I've hit the send button too fast. Try: ip default-gateway 12.124.201.145 -Original Message- From: Walker, James - Is Sent: Thursday, December 12, 2002 2:15 PM To: 'Brian Zeitz'; [EMAIL PROTECTED] Subject: RE: help [7:59112] Try: interface Serial2/0 ip address 12.124.201.145 255.255.255.252 -Original Message- From: Brian Zeitz [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 12, 2002 1:50 PM To: [EMAIL PROTECTED] Subject: help [7:59112] Router Setup This may be a very simple question, but I set up my router and I cannot access the internet. Here is the configuration file. I tried the command IP Route 0.0.0.0 0.0.0.0 x.x.x.x as well, with no luck. Sigh Also does anyone have any links for configuration PDF for 3600 routers? version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! enable secret 5 _/ enable password ! ip subnet-zero ! ! ip name-server 12.127.17.72 ! ! ! ! interface Ethernet0/0 ip address 12.104.49.161 255.255.255.224 no ip mroute-cache half-duplex ! interface Ethernet0/1 no ip address no ip mroute-cache shutdown half-duplex ! interface Ethernet0/2 no ip address no ip mroute-cache shutdown half-duplex ! interface Ethernet0/3 no ip address no ip mroute-cache shutdown half-duplex ! interface Serial2/0 bandwidth 1544000 ip address 12.124.201.146 255.255.255.252 encapsulation ppp no ip mroute-cache ! ip default-gateway 12.104.49.161 ip classless ip http server ip pim bidir-enable ! ! line con 0 line aux 0 line vty 0 4 password login ! end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59121&t=59112 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: help [7:59112]
interface Serial2/0 ip address 12.124.201.145 255.255.255.252 -Original Message- From: Brian Zeitz [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 12, 2002 1:50 PM To: [EMAIL PROTECTED] Subject: help [7:59112] Router Setup This may be a very simple question, but I set up my router and I cannot access the internet. Here is the configuration file. I tried the command IP Route 0.0.0.0 0.0.0.0 x.x.x.x as well, with no luck. Sigh Also does anyone have any links for configuration PDF for 3600 routers? version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Router ! enable secret 5 _/ enable password ! ip subnet-zero ! ! ip name-server 12.127.17.72 ! ! ! ! interface Ethernet0/0 ip address 12.104.49.161 255.255.255.224 no ip mroute-cache half-duplex ! interface Ethernet0/1 no ip address no ip mroute-cache shutdown half-duplex ! interface Ethernet0/2 no ip address no ip mroute-cache shutdown half-duplex ! interface Ethernet0/3 no ip address no ip mroute-cache shutdown half-duplex ! interface Serial2/0 bandwidth 1544000 ip address 12.124.201.146 255.255.255.252 encapsulation ppp no ip mroute-cache ! ip default-gateway 12.104.49.161 ip classless ip http server ip pim bidir-enable ! ! line con 0 line aux 0 line vty 0 4 password login ! end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59119&t=59112 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCDA case study in Exam [7:59068]
This test has multiple case studies and multiple questions per case study. Yes, you can refer back to the case studies for all the questions. You will lose average of 3 min. per question as you have to refer back to the case study. After spending over an hour on case studies (hint hint), my head was aching after the exam. IMO, CCIE written was easier. -Original Message- From: Sliver [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 12, 2002 8:29 AM To: [EMAIL PROTECTED] Subject: CCDA case study in Exam [7:59068] Hi GroupStudy, I heard that there is case studies in the CCDA exam. I would like to know how does it works? Is it that they gave you a case and the next few question will ask you some multiple choice questions that is related to that case? Can I go back to the case study during those questions? Thanx.. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59075&t=59068 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 802.1Q trunking on 2500?? [7:56690]
Hi, I made a mistake making that statement. With the new IOS codes, 12.x, you can create subinterfaces. :-O Jim -Original Message- From: Connie Nie [mailto:CNie@;EPLUS.com] Sent: Friday, November 01, 2002 12:06 PM To: [EMAIL PROTECTED] Subject: RE: 802.1Q trunking on 2500?? [7:56690] I don't think you can do that on a 10M interface. Has to be a fast ethernet interface. Connie -Original Message- From: cer [mailto:ciscoriley@;hotmail.com] Sent: Friday, November 01, 2002 11:16 AM To: [EMAIL PROTECTED] Subject: 802.1Q trunking on 2500?? [7:56690] Hi, all, Can the 2500 series support 802.1Q? If so, what IOS version and feature set would be needed? I want to create some logical subinterfaces on the 2500 that correpond to VLANs, as a way of segmenting traffic. TIA, Charles Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56695&t=56690 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VLan encap. over WAN [7:52613]
Create a 'bridge-group' by issuing the command on the interfaces you want to span. -Original Message- From: Arni V. Skarphedinsson [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 03, 2002 11:25 AM To: [EMAIL PROTECTED] Subject: VLan encap. over WAN [7:52613] I have the following problem, I have two locations connected bya ATM from a service provide, and I get ethernet at each end, now I would like to send Vlan tagged frames 802.1q over the link, as I need to have two IP networks span both sites. But when I turn tagging on, It does not work, and the Provider says that his equipment can4t handle the tagged frames Is there any way to work around this, with routing or switching ?? please let me know Best regards Arni Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52615&t=52613 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: can reach host [7:50422]
What are the source and destination IP addresses? Are they on the same vlan? -Original Message- From: GEORGE [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 01, 2002 2:30 PM To: [EMAIL PROTECTED] Subject: can reach host [7:50422] I having problems pinging a host on a different vlan. However I can access other host that are connected to the same switch?? Trunking is enable What can I look for . the device is on native vlan , while I am on vlan 2 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50435&t=50422 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: switch command [7:50413]
Switches are layer 2 and IP addresses are layer 3. Are you working with a layer 3 switch? -Original Message- From: GEORGE [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 01, 2002 2:11 PM To: [EMAIL PROTECTED] Subject: switch command [7:50413] Is their a command to view all the ip addresses connected to my switch. I do a show arp shows a couple Or how often does ip addresses get added to the switch? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50416&t=50413 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Ping latency [7:50018]
Are you pinging a directly connected interface or something deeper into the network??? -Original Message- From: DW [mailto:[EMAIL PROTECTED]] Sent: Monday, July 29, 2002 11:44 AM To: [EMAIL PROTECTED] Subject: Ping latency [7:50018] I am running 2 WAN links through the same router and have been have session disconnect problems recently. I have been running several ping tests across both of the links (128K FR and 512K Leased line) and they are both showing response times fluctuating from 30ms to 1400ms (No dropped packets). I believe this is the root of the problem. What could be causing this delay through the router ??? The memory and processor usage looks to be within tolerable limits. I am also assuming this kind of delay is not normal, would I be right ?? All answers appreciated ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50031&t=50018 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: DCE or DTE [7:49625]
The one you can add the clocking statement is the DCE end. You can use 'show controllers serial 0' to verify. JW -Original Message- From: Chuck [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 25, 2002 11:59 AM To: [EMAIL PROTECTED] Subject: Re: DCE or DTE [7:49625] ""Juan Blanco"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > The command is show controllers..or show controllers serial 0..or > show controllers serial 1 > It will tell you a the beging if your end is a DTE or a DCE FYI: Router_1#show controllers s 1 HD unit 1, idb = 0x1B3274, driver structure at 0x1B95E8 buffer size 1524 HD unit 1, V.35 DCE cable, clockrate 100 DCE end attached. > > JB > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > John Brandis > Sent: Thursday, July 25, 2002 2:52 AM > To: [EMAIL PROTECTED] > Subject: DCE or DTE [7:49625] > > > Been away from routers for a while > > whats the command to figure out which serial in in a back to abck config is > DCE/DTE ? > > Reason is I have 2 back to back 2503's. My serial cable is going to S0 in > each router. IN the configs, I have > > Bris Router# > int s0 > ip address 192.168.1.1 255.255.255.0 > encapsulation ppp > bandwidth 64 > clock rate 64000 > no shut > > Melb Router# > int s0 > ip address 192.168.1.2 255.255.255.0 > encapsulation ppp > bandwidth 64 > no shut > > What am I missing as I have the int face is up, line proto down. I really > should be able to figure this one out, however its late afternoon in > Australia and I want to sleep after a big night of watching Buffy repeats. > > John Brandis > > Desk: 02-9278-0629 > Mobile: 0414-495-320 > [EMAIL PROTECTED] > www.solution6.com > > > > > ** > > visit http://www.solution6.com > visit http://www.eccountancy.com - everything for accountants. > > UK Customers - http://www.solution6.co.uk > > * > This email message (and attachments) may contain information that is > confidential to Solution 6. If you are not the intended recipient you cannot > use, distribute or copy the message or attachments. In such a case, please > notify the sender by return email immediately and erase all copies of the > message and attachments. Opinions, conclusions and other information in > this message and attachments that do not relate to the official business of > Solution 6 are neither given nor endorsed by it. > * Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49724&t=49625 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
