Connecting printer through Cisco Routers [7:41473]
Hi Guys I have a strange problem. I have to carry a printer a different location ( The PC connected to printer is not moving , only printer) The printer must be connected to RS 232 Port of the PC. So I will have to carry RS232 signals through Cisco Router. I mean PC connected to serial port of router and Printer will connect to the other router s serial port. Anybody tried this or has an idea ? Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41473t=41473 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Connecting printer through Cisco Routers [7:41473]
well I don't understand your question...but it would seem tat console output would be console output regardless... IF you are consoling in at 9600, then the output device is your screen. If you hook a printer up to the console at 96008n1, then the output would be through the ribbon, onto the paper... -Patrick [EMAIL PROTECTED] 04/15/02 05:03AM Hi Guys I have a strange problem. I have to carry a printer a different location ( The PC connected to printer is not moving , only printer) The printer must be connected to RS 232 Port of the PC. So I will have to carry RS232 signals through Cisco Router. I mean PC connected to serial port of router and Printer will connect to the other router s serial port. Anybody tried this or has an idea ? Thanks. Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. (WellStar) and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41486t=41473 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Connecting printer through Cisco Routers [7:41473]
My interpretation of the question may be incorrect but it sounds like your looking to extend a RS-232 connection across your router network? PC- RS-232- Router- Net- Router- RS-232- Printer I assume in theory you could use STUN (serial tunneling), but throw in the fact that you want to use the console port and things become a little more difficult. Philip -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, April 15, 2002 5:04 AM To: [EMAIL PROTECTED] Subject: Connecting printer through Cisco Routers [7:41473] Hi Guys I have a strange problem. I have to carry a printer a different location ( The PC connected to printer is not moving , only printer) The printer must be connected to RS 232 Port of the PC. So I will have to carry RS232 signals through Cisco Router. I mean PC connected to serial port of router and Printer will connect to the other router s serial port. Anybody tried this or has an idea ? Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41494t=41473 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NAT with printer [7:38781]
Hi All, I really have a problem. I have enabled NAT on the router. I am able to reach all PCs but the printer. Here is the senario: 192.168.1.0192.168.3.0 | | | | --Router1-Router2-- | | 192.168.3.252 (Printer) 1. We have enabled NAT on router2 to translate 192.168.3.0 0.0.0.250 to a pool 192.168.8.0 2. Enabled static NAT for printer to 192.168.8.252 Please help Zolla Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38781t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Is this a Network printer with a card or jet direct box? -Original Message- From: Zolla Zimmerman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 19, 2002 8:04 AM To: [EMAIL PROTECTED] Subject: NAT with printer [7:38781] Hi All, I really have a problem. I have enabled NAT on the router. I am able to reach all PCs but the printer. Here is the senario: 192.168.1.0192.168.3.0 | | | | --Router1-Router2-- | | 192.168.3.252 (Printer) 1. We have enabled NAT on router2 to translate 192.168.3.0 0.0.0.250 to a pool 192.168.8.0 2. Enabled static NAT for printer to 192.168.8.252 Please help Zolla Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38784t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Yes. This is a network printer with a card. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38785t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
What does your access list look like that controls what gets NAT'd to the 192.168.8.0 pool? Is the printer excluded from this NAT list? What is the default gateway of the printer? Arjen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: March 19, 2002 9:44 AM To: [EMAIL PROTECTED] Subject: RE: NAT with printer [7:38781] Yes. This is a network printer with a card. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38790t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
When you say that you cannot reach the printer, do you mean: - you cannot see it from your JetAdmin? - you cannot telnet to it? - you cannot ping it? - ? Have you set the default gateway to Router2 on the printer? Have you verified the correct subnet mask on the printer? Hth, Ole ~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~ http://www.RouterChief.com ~ Need a Job? http://www.OleDrews.com/job ~ -Original Message- From: Zolla Zimmerman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 19, 2002 8:04 AM To: [EMAIL PROTECTED] Subject: NAT with printer [7:38781] Hi All, I really have a problem. I have enabled NAT on the router. I am able to reach all PCs but the printer. Here is the senario: 192.168.1.0192.168.3.0 | | | | --Router1-Router2-- | | 192.168.3.252 (Printer) 1. We have enabled NAT on router2 to translate 192.168.3.0 0.0.0.250 to a pool 192.168.8.0 2. Enabled static NAT for printer to 192.168.8.252 Please help Zolla Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38792t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Hi, I have excluded the printer from the NAT pool through access-list only. Here is what I have for the configuration: ip nat pool ippool 192.168.8.1 192.168.8.254 netmask 255.255.255.0 ip nat inside source list 7 pool ippool access-list 7 permit 192.168.3.0 0.0.0.255 access-list 7 deny host 192.168.3.252 The gateway on the printer points to a server which has the routing to the other network. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38793t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Hi I can not ping, traceroute, add the printer. Thanks When you say that you cannot reach the printer, do you mean: - you cannot see it from your JetAdmin? - you cannot telnet to it? - you cannot ping it? - ? Have you set the default gateway to Router2 on the printer? Have you verified the correct subnet mask on the printer? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38794t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
The ACL is backwards. Is the server running a routing engine? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: March 19, 2002 10:16 AM To: [EMAIL PROTECTED] Subject: RE: NAT with printer [7:38781] Hi, I have excluded the printer from the NAT pool through access-list only. Here is what I have for the configuration: ip nat pool ippool 192.168.8.1 192.168.8.254 netmask 255.255.255.0 ip nat inside source list 7 pool ippool access-list 7 permit 192.168.3.0 0.0.0.255 access-list 7 deny host 192.168.3.252 The gateway on the printer points to a server which has the routing to the other network. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38795t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
What do you mean by routing engine? I can ping the server from the other network. The server has routing information. Do I have to change the gateway on the printer to point the router? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38798t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Is it possible for you to update the firmware on your card -Original Message- From: Zolla Zimmerman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 19, 2002 9:44 AM To: [EMAIL PROTECTED] Subject: RE: NAT with printer [7:38781] Yes. This is a network printer with a card. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38799t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
have you done this for the HP card? ip nat pool pool 64.64.64.64 64.64.64.64 netmask 255.255.255.252 ip nat inside source static tcp 192.168.1.1 9100 64.64.64.64 9150 extendable -Original Message- From: Zolla Zimmerman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 19, 2002 8:44 AM To: [EMAIL PROTECTED] Subject: RE: NAT with printer [7:38781] Yes. This is a network printer with a card. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38802t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NAT with printer [7:38781]
Have you disallowed the printer address with an acl for the pool? Marc Zolla Zimmerman wrote: Hi All, I really have a problem. I have enabled NAT on the router. I am able to reach all PCs but the printer. Here is the senario: 192.168.1.0192.168.3.0 | | | | --Router1-Router2-- | | 192.168.3.252 (Printer) 1. We have enabled NAT on router2 to translate 192.168.3.0 0.0.0.250 to a pool 192.168.8.0 2. Enabled static NAT for printer to 192.168.8.252 Please help Zolla Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38800t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
No. I can not do this. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38803t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
No it is Lexmark printer. I do not know the printer has a card or a print server. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38805t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Yes, change the default gateway of the printer to be router2. And before you go too far with this NAT/printer thing, make sure that you can ping the printer from its local network. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: March 19, 2002 10:34 AM To: [EMAIL PROTECTED] Subject: RE: NAT with printer [7:38781] What do you mean by routing engine? I can ping the server from the other network. The server has routing information. Do I have to change the gateway on the printer to point the router? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38806t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
Yes, the printer needs to know where to send traffic that is not on the local network. Telnet into the printer from a computer on the local network, and setup it's default gateway. Ole ~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~ http://www.RouterChief.com ~ Need a Job? http://www.OleDrews.com/job ~ -Original Message- From: Zolla Zimmerman [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 19, 2002 9:34 AM To: [EMAIL PROTECTED] Subject: RE: NAT with printer [7:38781] What do you mean by routing engine? I can ping the server from the other network. The server has routing information. Do I have to change the gateway on the printer to point the router? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38811t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AW: NAT with printer [7:38781]
Well I would change your ACL--switch order of the lines. I would then suggest you take a labtop and give it the ip address of the printer and plug it in and see if you can recieve and send pings with the labtop. I always test printer problems like this. Of course the printer must be offline for the test. stuart Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38812t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT with printer [7:38781]
I changed the gateway to point to the router and it worked. Thanks everybody. I and my boss really appreciate everybodies help in this matter. Zolla Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38819t=38781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IBM printer question [7:13992]
Question for all you IBM printer gurus. I have the following small office connected to my hospital. HOSPITAL-AIRONET340OFFICE-AIRONET340---C1924IBM AFP Printer. Here is the problem. After about 15-30 minutes the printer is no longer visible or pingable from the network. It seems to time out from the switch connection. If I log into the switch and ping this printer it comes back up and is then visible on the network again, until it times out? Any known conflicts with the C1900's or the Aironets and this particular printer? Anyone know of any timeout parameter changes that might take care of this? There isn't a whole lot of commands on the 1900 to use. Bob Sites System Engineer Valley Health System, IS Dept. [EMAIL PROTECTED] Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipients and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13992t=13992 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IBM printer question [7:13992]
You might want to check is the port is going into errordisable mode. Usually when this happens, the switch is either set to or detecting full-duplex, when in fact the printer is only working in half-duplex. That could explain the reset when you log into the switch. I have seen this A LOT with HP printers and Catalyst switches. HTH __ Thomas Crowe Senior Systems Engineer / Architect CTS - Atlanta Phone: 770-664-3900 Cell: 404-277-4089 __ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sites, Bob Sent: Friday, July 27, 2001 2:11 PM To: [EMAIL PROTECTED] Subject: IBM printer question [7:13992] Question for all you IBM printer gurus. I have the following small office connected to my hospital. HOSPITAL-AIRONET340OFFICE-AIRONET340---C1924IBM AFP Printer. Here is the problem. After about 15-30 minutes the printer is no longer visible or pingable from the network. It seems to time out from the switch connection. If I log into the switch and ping this printer it comes back up and is then visible on the network again, until it times out? Any known conflicts with the C1900's or the Aironets and this particular printer? Anyone know of any timeout parameter changes that might take care of this? There isn't a whole lot of commands on the 1900 to use. Bob Sites System Engineer Valley Health System, IS Dept. [EMAIL PROTECTED] Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipients and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. [GroupStudy.com removed an attachment of type text/x-vcard which had a name of Thomas Crowe.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13994t=13992 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IBM printer question [7:13992]
This is related to the printer MAC address aged out of the CAM table due to inactivity. We see a lot on our servers. What we do is creating a ping script (traffic) on the servers to ping the gateway. In your case, you can do a continuous ping to the printer IP from a workstation or server, say ping it very 3 minute or so. Jianliang Li --- Thomas Crowe wrote: You might want to check is the port is going into errordisable mode. Usually when this happens, the switch is either set to or detecting full-duplex, when in fact the printer is only working in half-duplex. That could explain the reset when you log into the switch. I have seen this A LOT with HP printers and Catalyst switches. HTH __ Thomas Crowe Senior Systems Engineer / Architect CTS - Atlanta Phone: 770-664-3900 Cell: 404-277-4089 __ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sites, Bob Sent: Friday, July 27, 2001 2:11 PM To: [EMAIL PROTECTED] Subject: IBM printer question [7:13992] Question for all you IBM printer gurus. I have the following small office connected to my hospital. HOSPITAL-AIRONET340OFFICE-AIRONET340---C1924IBM AFP Printer. Here is the problem. After about 15-30 minutes the printer is no longer visible or pingable from the network. It seems to time out from the switch connection. If I log into the switch and ping this printer it comes back up and is then visible on the network again, until it times out? Any known conflicts with the C1900's or the Aironets and this particular printer? Anyone know of any timeout parameter changes that might take care of this? There isn't a whole lot of commands on the 1900 to use. Bob Sites System Engineer Valley Health System, IS Dept. [EMAIL PROTECTED] Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipients and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. [GroupStudy.com removed an attachment of type text/x-vcard which had a name of Thomas Crowe.vcf] [EMAIL PROTECTED] __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14000t=13992 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Printer
From Router2 (Different Segment as the print server is concerned) and my print server is 10.1.1.5 Welcome. Router 2524 User Access Verification Password: r2524en Password: r2524#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/12/36 ms r2524# -- From Router1 ( on same segment) WelcomeWelcome. Router 2514 User Access Verification Password: r2514en Password: r2514#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms r2514# From Windows 2000 Server ( on the far segment) E:\Documents and Settings\Administratoripconfig/all Windows 2000 IP Configuration Host Name . . . . . . . . . . . . : sbo2000 Primary DNS Suffix . . . . . . . : test.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : test.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter Versi on 1.0 Physical Address. . . . . . . . . : 00-A0-CC-22-F9-DD DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 15.1.1.1 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 15.1.1.17 DNS Servers . . . . . . . . . . . : 15.1.1.1 E:\Documents and Settings\Administratorping 10.1.1.5 Pinging 10.1.1.5 with 32 bytes of data: Reply from 10.1.1.5: bytes=32 time=10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Ping statistics for 10.1.1.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10ms, Average = 2ms E:\Documents and Settings\Administrator ""whatshakin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Ping the print server from the 2000 and from each router in between. Post your results here. - Original Message - From: Amjad M. Afana [EMAIL PROTECTED] Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] Sent: Sunday, September 03, 2000 9:00 PM Subject: Printer I have network printer in one segment and wanted to print to it from remote computers across a router (2 hops away). The printer is attached to an Intel EtherExpress Pro 100 box and is configured to use TCP/IP printing. I was able to install the printer on a remote Windows 2000 server, but could not print. I thought maybe I have to use some IP Forward statements on my router (2500 series) but I am not sure what kind of IP or port number used. If somebody knows about that or can direct me to find the port number, that will be very much appreciated. TIA. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Printer
Okay, you've got connectivity, but TCP/IP printing often involves port numbers. What is your printer model? Port assignments vary from manufacturer to manufacturer. Apple LaserWriters configure differently than Xerox DocuPrint printers. Check your documentation. By far the easiest config I've managed to work (and I work with mixed Windows/98/NT and Mac OS environments) is to enable TCP/IP printing through the NT server, use LPR and assign requisite drivers and port assignments. I can't imagine that W2K is much different. Another question: can you print on a local segment from the W2K server? Try it ""Amjad M. Afana"" [EMAIL PROTECTED] wrote in message 8p03nu$bir$[EMAIL PROTECTED]">news:8p03nu$bir$[EMAIL PROTECTED]... From Router2 (Different Segment as the print server is concerned) and my print server is 10.1.1.5 Welcome. Router 2524 User Access Verification Password: r2524en Password: r2524#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/12/36 ms r2524# -- -- -- From Router1 ( on same segment) WelcomeWelcome. Router 2514 User Access Verification Password: r2514en Password: r2514#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms r2514# -- -- From Windows 2000 Server ( on the far segment) E:\Documents and Settings\Administratoripconfig/all Windows 2000 IP Configuration Host Name . . . . . . . . . . . . : sbo2000 Primary DNS Suffix . . . . . . . : test.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : test.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter Versi on 1.0 Physical Address. . . . . . . . . : 00-A0-CC-22-F9-DD DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 15.1.1.1 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 15.1.1.17 DNS Servers . . . . . . . . . . . : 15.1.1.1 E:\Documents and Settings\Administratorping 10.1.1.5 Pinging 10.1.1.5 with 32 bytes of data: Reply from 10.1.1.5: bytes=32 time=10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Ping statistics for 10.1.1.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10ms, Average = 2ms E:\Documents and Settings\Administrator ""whatshakin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Ping the print server from the 2000 and from each router in between. Post your results here. - Original Message - From: Amjad M. Afana [EMAIL PROTECTED] Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] Sent: Sunday, September 03, 2000 9:00 PM Subject: Printer I have network printer in one segment and wanted to print to it from remote computers across a router (2 hops away). The printer is attached to an Intel EtherExpress Pro 100 box and is configured to use TCP/IP printing. I was able to install the printer on a remote Windows 2000 server, but could not print. I thought maybe I have to use some IP Forward statements on my router (2500 series) but I am not sure what kind of IP or port number used. If somebody knows about that or can direct me to find the port number, that will be very much appreciated. TIA. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/l
Re: Printer
Thanks for your reply guys. Yes there is connectivity. This is how I was able to add the printer port to Windows 2000 (TCP/IP Port). Anywasy The printer is an HP Deskjet 970 ( I believe). I have also noticted the following: router 2 has IOS V12 and router has IOS 11.x. Looks like each IOS has different defaults. The V12 had the "No directed broadcast" by default, so I enabled that for now. I also added IP Helper-address statements to each ethernet interface on each router to use directed broadcast into the other segment, ie, on router1's e0 (10.1.1.17) I used the ip helper 15.255.255.255, and on router2's e0 (15.1.1.17) I used the helper address 10.255.255.255. Printing on the local segment is okay. I also tried to use the Network Monitor that ships with Win2K and capture packets while printing from the local segment. I thought maybe it would show the port used, but it does not. David Williams wrote: Okay, you've got connectivity, but TCP/IP printing often involves port numbers. What is your printer model? Port assignments vary from manufacturer to manufacturer. Apple LaserWriters configure differently than Xerox DocuPrint printers. Check your documentation. By far the easiest config I've managed to work (and I work with mixed Windows/98/NT and Mac OS environments) is to enable TCP/IP printing through the NT server, use LPR and assign requisite drivers and port assignments. I can't imagine that W2K is much different. Another question: can you print on a local segment from the W2K server? Try it ""Amjad M. Afana"" [EMAIL PROTECTED] wrote in message 8p03nu$bir$[EMAIL PROTECTED]">news:8p03nu$bir$[EMAIL PROTECTED]... From Router2 (Different Segment as the print server is concerned) and my print server is 10.1.1.5 Welcome. Router 2524 User Access Verification Password: r2524en Password: r2524#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/12/36 ms r2524# -- -- -- From Router1 ( on same segment) WelcomeWelcome. Router 2514 User Access Verification Password: r2514en Password: r2514#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms r2514# -- -- From Windows 2000 Server ( on the far segment) E:\Documents and Settings\Administratoripconfig/all Windows 2000 IP Configuration Host Name . . . . . . . . . . . . : sbo2000 Primary DNS Suffix . . . . . . . : test.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : test.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter Versi on 1.0 Physical Address. . . . . . . . . : 00-A0-CC-22-F9-DD DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 15.1.1.1 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 15.1.1.17 DNS Servers . . . . . . . . . . . : 15.1.1.1 E:\Documents and Settings\Administratorping 10.1.1.5 Pinging 10.1.1.5 with 32 bytes of data: Reply from 10.1.1.5: bytes=32 time=10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Ping statistics for 10.1.1.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10ms, Average = 2ms E:\Documents and Settings\Administrator ""whatshakin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Ping the print server from the 2000 and from each router in between. Post your results here. - Original Message - From: Amjad M. Afana [EMAIL PROTECTED] Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] Sent: Sunday, September 03, 2000 9:00 PM Subject: Printer I have network printer in one segment and wanted to print to it from remote computers across a router (2 hops away). The printer is attached to an Intel EtherExpress Pro 100 box and is configured to use TCP/IP printing. I was able to install the printer on a remote Windows 2000 server, but could not print. I thought maybe I have to use some IP Forward statements on my router
Re: Printer
Looks like it has a named port. Do any of these look familiar? LPT1_PASSTHRU for most jobs (use this for Internal models or for printing devices on port 1 of the external model) LPT2_PASSTHRU for most jobs COM1_PASSTHRU for most jobs LPT1_TEXT for jobs that need to have a CR added to LF's (use for Internal models) LPT2_TEXT for jobs that need to have a CR added to LF's COM1_TEXT for jobs that need to have a CR added to LF's "Amjad Afana" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks for your reply guys. Yes there is connectivity. This is how I was able to add the printer port to Windows 2000 (TCP/IP Port). Anywasy The printer is an HP Deskjet 970 ( I believe). I have also noticted the following: router 2 has IOS V12 and router has IOS 11.x. Looks like each IOS has different defaults. The V12 had the "No directed broadcast" by default, so I enabled that for now. I also added IP Helper-address statements to each ethernet interface on each router to use directed broadcast into the other segment, ie, on router1's e0 (10.1.1.17) I used the ip helper 15.255.255.255, and on router2's e0 (15.1.1.17) I used the helper address 10.255.255.255. Printing on the local segment is okay. I also tried to use the Network Monitor that ships with Win2K and capture packets while printing from the local segment. I thought maybe it would show the port used, but it does not. David Williams wrote: Okay, you've got connectivity, but TCP/IP printing often involves port numbers. What is your printer model? Port assignments vary from manufacturer to manufacturer. Apple LaserWriters configure differently than Xerox DocuPrint printers. Check your documentation. By far the easiest config I've managed to work (and I work with mixed Windows/98/NT and Mac OS environments) is to enable TCP/IP printing through the NT server, use LPR and assign requisite drivers and port assignments. I can't imagine that W2K is much different. Another question: can you print on a local segment from the W2K server? Try it ""Amjad M. Afana"" [EMAIL PROTECTED] wrote in message 8p03nu$bir$[EMAIL PROTECTED]">news:8p03nu$bir$[EMAIL PROTECTED]... From Router2 (Different Segment as the print server is concerned) and my print server is 10.1.1.5 Welcome. Router 2524 User Access Verification Password: r2524en Password: r2524#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/12/36 ms r2524# -- -- -- From Router1 ( on same segment) WelcomeWelcome. Router 2514 User Access Verification Password: r2514en Password: r2514#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms r2514# -- -- From Windows 2000 Server ( on the far segment) E:\Documents and Settings\Administratoripconfig/all Windows 2000 IP Configuration Host Name . . . . . . . . . . . . : sbo2000 Primary DNS Suffix . . . . . . . : test.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : test.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter Versi on 1.0 Physical Address. . . . . . . . . : 00-A0-CC-22-F9-DD DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 15.1.1.1 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 15.1.1.17 DNS Servers . . . . . . . . . . . : 15.1.1.1 E:\Documents and Settings\Administratorping 10.1.1.5 Pinging 10.1.1.5 with 32 bytes of data: Reply from 10.1.1.5: bytes=32 time=10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Ping statistics for 10.1.1.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10ms, Average = 2ms E:\Documents and Settings\Administrator ""whatshakin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Ping the print server from the 2000 and from each
Re: Printer
Also, can you browse to the server from a remote workstation? "Amjad Afana" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks for your reply guys. Yes there is connectivity. This is how I was able to add the printer port to Windows 2000 (TCP/IP Port). Anywasy The printer is an HP Deskjet 970 ( I believe). I have also noticted the following: router 2 has IOS V12 and router has IOS 11.x. Looks like each IOS has different defaults. The V12 had the "No directed broadcast" by default, so I enabled that for now. I also added IP Helper-address statements to each ethernet interface on each router to use directed broadcast into the other segment, ie, on router1's e0 (10.1.1.17) I used the ip helper 15.255.255.255, and on router2's e0 (15.1.1.17) I used the helper address 10.255.255.255. Printing on the local segment is okay. I also tried to use the Network Monitor that ships with Win2K and capture packets while printing from the local segment. I thought maybe it would show the port used, but it does not. David Williams wrote: Okay, you've got connectivity, but TCP/IP printing often involves port numbers. What is your printer model? Port assignments vary from manufacturer to manufacturer. Apple LaserWriters configure differently than Xerox DocuPrint printers. Check your documentation. By far the easiest config I've managed to work (and I work with mixed Windows/98/NT and Mac OS environments) is to enable TCP/IP printing through the NT server, use LPR and assign requisite drivers and port assignments. I can't imagine that W2K is much different. Another question: can you print on a local segment from the W2K server? Try it ""Amjad M. Afana"" [EMAIL PROTECTED] wrote in message 8p03nu$bir$[EMAIL PROTECTED]">news:8p03nu$bir$[EMAIL PROTECTED]... From Router2 (Different Segment as the print server is concerned) and my print server is 10.1.1.5 Welcome. Router 2524 User Access Verification Password: r2524en Password: r2524#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/12/36 ms r2524# -- -- -- From Router1 ( on same segment) WelcomeWelcome. Router 2514 User Access Verification Password: r2514en Password: r2514#ping 10.1.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms r2514# -- -- From Windows 2000 Server ( on the far segment) E:\Documents and Settings\Administratoripconfig/all Windows 2000 IP Configuration Host Name . . . . . . . . . . . . : sbo2000 Primary DNS Suffix . . . . . . . : test.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : test.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter Versi on 1.0 Physical Address. . . . . . . . . : 00-A0-CC-22-F9-DD DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 15.1.1.1 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 15.1.1.17 DNS Servers . . . . . . . . . . . : 15.1.1.1 E:\Documents and Settings\Administratorping 10.1.1.5 Pinging 10.1.1.5 with 32 bytes of data: Reply from 10.1.1.5: bytes=32 time=10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Reply from 10.1.1.5: bytes=32 time10ms TTL=58 Ping statistics for 10.1.1.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10ms, Average = 2ms E:\Documents and Settings\Administrator ""whatshakin"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Ping the print server from the 2000 and from each router in between. Post your results here. - Original Message - From: Amjad M. Afana [EMAIL PROTECTED] Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] Sent: Sunday, September 03, 2000 9:00 PM Subject: Printer I have network printer in one segment and wanted to print to it from remote computers across a
Re: Printer
Amjad, MS's IP printing relies on LPR on the workstation/server and LPD on the print server itself. When you install the printer, Windows will check for a response from the printer on the LPD port - TCP 515. Make sure you're using a valid queue name - usually 'raw' or 'auto' works, but check with the Print server docs. Check your NT/2000 event viewer - Application for errors. Make sure your server does not have a space in the name. This seems to make LPR fail, from a WS I worked on last week. Neither MS nor Xerox had an explanation. Typical MS problem... Chuck Church Network Engineer CCNP, MCNE, MCSE Magnacom Technologies 140 Route 303 Valley Cottage, NY 10989 Email:[EMAIL PROTECTED] Voice: 914 267-4000 ext 218 Fax: 914 267-1034 I have network printer in one segment and wanted to print to it from remote computers across a router (2 hops away). The printer is attached to an Intel EtherExpress Pro 100 box and is configured to use TCP/IP printing. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]