[Cooker] [Bug 5194] [kernel] Mustek GSmartMini2 USB digicamera not recognized
http://qa.mandrakesoft.com/show_bug.cgi?id=5194 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 22:56 --- Created an attachment (id=788) -- (http://qa.mandrakesoft.com/attachment.cgi?id=788action=view) dmesg output i only used an usb mouse, but i did not have any problems with that. i attached the dmesg output (see attachments). -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I can not load the digicamera Mustek GSmartMini2. Error messages with GTKam: Bad parameters: Could not list folders in / Bad parameters: Could not initialize camera With MDK9.1 and kernel 2.4.21-x I have no problems.
Re: [Cooker] SATA support in Mandrake Linux 9.1.
From: d2ci1fj g1nf24 [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Cooker] SATA support in Mandrake Linux 9.1. Date: Wed, 10 Sep 2003 20:38:39 + From: Thomas Backlund [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Cooker] SATA support in Mandrake Linux 9.1. Date: Wed, 10 Sep 2003 18:01:54 +0300 d2ci1fj g1nf24 kirjoitti viestissään (lähetysaika Keskiviikko 10. Syyskuuta 2003 07:35): Hi, I am trying to install Mandrake 9.1 using a SATA drive and it is not supported. I posted on the installation mailing list and they recommended posting here. Is there anyway to install using a SATA drive? The problem is I need to install a driver. When I'm installing a page comes up and ask me to select a driver for hard/scsi. The first one on the list is a 3ware driver there are more drivers after that. I tried alot of them and keep getting an error message. I am using the new Western Digital SATA hard drive. Does someone know what to do? How about telling what SATA Controller you have? Or if you don't know, The exact model of the Motherboard will do... And if you don't know that either, What system do you have? Manufacturer? Model? Without any more info, it's impossible to help Regards Thomas Hi, I am using a D875PBZ motherboard. From, Steven _ Send and receive larger attachments with Hotmail Extra Storage. http://join.msn.com/?PAGE=features/es _ Need more e-mail storage? Get 10MB with Hotmail Extra Storage. http://join.msn.com/?PAGE=features/es
Re: [Cooker] Mandrake Web Site Fonts
On Thu, 2003-09-11 at 01:07, Felix Miata wrote: Adam Williamson wrote: On Wed, 2003-09-10 at 15:27, Felix Miata wrote: The above is very offensive, not so much the family as the size. Those using high resolution displays like 1600x1200 or above see 12px as Only if their system is misconfigured. Absolutely not! If you use 1600x1200 on a monitor below 17 in size, you're misusing it. Absolutely not! Maybe you'd like to explain the preponderance of notebook displays of about 15 that are optimized for 1280x1024 (SXGA), 1400x1050 (SXGA+), or even 1600x1200 (UXGA)? With pleasure. A 15 laptop display is equivalent to a 17 CRT, and LCDs are generally better at being viewable at high resolution anyway, so 1280x1024 or 1400x1050 are perfectly acceptable on them. Personally, I think 1600x1200 is still too high for a 15 LCD. I wouldn't buy a laptop which had such a screen. For a monitor 19 in size or bigger, 12pt fonts at 1600x1200 should look pretty much the same size as 12pt fonts at 1280x1024 on a 17 monitor, for instance. Point sizes are Actually not. 1600x1200 is a standard 4/3 aspect ratio, while 1280x1024 is a bastard 5/4 ratio, and everything is malproportioned as a result of the latter. See http://members.ij.net/mrmazda/auth/aspect.html Yes, I know this. It was simply an example resolution in the sensible range for monitor size / resolution tradeoff. Then there's the DPI issue. Pt sizes depend on DPI as well as monitor size and resolution, while px sizes only depend on monitor size and resolution. Pt is not an appropriate way to size display fonts: http://www.w3.org/TR/WAI-WEBCONTENT/#tech-relative-units http://bobby.watchfire.com/bobby/html/en/gls/g104.html relative, not absolute, and therefore if you configure X correctly and use a reasonable resolution for your display size, a 12pt font will be perfectly fine. 12pt should be fine for about anyone in any case. However, the web page at issue was not using pt, but rather px, which is entirely different. Visit http://members.ij.net/mrmazda/auth/allreschooser.html to understand the impact of 12px, regardless of resolution. Ah, I thought webpages set sizes in pt. My bad, sorry. -- adamw
[Cooker] [Bug 4776] [blender] blender = Segmentation fault
http://qa.mandrakesoft.com/show_bug.cgi?id=4776 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 22:58 --- Which python version are you using? Can you post the output of rpm -qa | grep -i python | sort ? Here is mine: libpython2.3-2.3-3mdk python-2.3-3mdk python-base-2.3-3mdk python-imaging-1.1.4-2mdk Why /usr//bin/blender instead of /usr/bin/blender? What you have in your $PATH? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault Bjørn Jørgensen
[Cooker] [Bug 4922] [kernel] SiS7012 PCI Audio Accelerator does not work with kernel-2.4.22-x
http://qa.mandrakesoft.com/show_bug.cgi?id=4922 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 22:59 --- Created an attachment (id=789) -- (http://qa.mandrakesoft.com/attachment.cgi?id=789action=view) dmesg output i've attached the dmesg output (please see attachments). -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The SiS7012 sound chip does not work with kernel-2.4.22-x (including 2.4.22-1mdk). With kernel-2.4.21-x there are no problems. The error message, when starting the sound server in KDE/Gnome, is: Sound server informational message: Error while initializing the sound driver: device /dev/dsp can't be opened (Device or resource busy) The sound server will continue, using the null output device. All the commands suggested in harddrake seem to me ok (sound chip uses snd-intel8x0 module), except of the command: fuser -v /dev/dsp, which gives no result at all. lsmod shows this: Module Size Used byNot tainted udf89952 0 (autoclean) parport_pc 25352 1 (autoclean) lp 8128 0 (autoclean) parport34376 1 (autoclean) [parport_pc lp] ipt_TOS 1592 12 (autoclean) ipt_MASQUERADE 2072 1 (autoclean) ipt_REJECT 3928 4 (autoclean) ipt_LOG 4088 6 (autoclean) ipt_state 1048 22 (autoclean) ipt_multiport 1176 4 (autoclean) ipt_conntrack 1528 0 (autoclean) iptable_filter 2316 1 (autoclean) iptable_mangle 2712 1 (autoclean) iptable_nat20814 1 (autoclean) [ipt_MASQUERADE] ip_conntrack 26180 3 (autoclean) [ipt_MASQUERADE ipt_state ipt_conntrack iptable_nat] ip_tables 15072 12 [ipt_TOS ipt_MASQUERADE ipt_REJECT ipt_LOG ipt_state ipt_multiport ipt_conntrack iptable_filter iptable_mangle iptable_nat] snd-seq-oss31808 0 (unused) snd-seq-midi-event 6016 0 [snd-seq-oss] snd-seq42320 2 [snd-seq-oss snd-seq-midi-event] snd-pcm-oss43428 1 snd-mixer-oss 14232 0 [snd-pcm-oss] snd-intel8x0 21124 3 snd-pcm78692 1 [snd-pcm-oss snd-intel8x0] snd-timer 18276 0 [snd-seq snd-pcm] snd-ac97-codec 44824 0 [snd-intel8x0] snd-mpu401-uart 4608 0 [snd-intel8x0] snd-rawmidi17664 0 [snd-mpu401-uart] snd-seq-device 5672 0 [snd-seq-oss snd-seq snd-rawmidi] snd-page-alloc 8948 0 [snd-intel8x0 snd-pcm] snd40836 2 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6308 0 [snd] nfsd 74544 8 (autoclean) af_packet 14824 2 (autoclean) sr_mod 19384 0 (autoclean) floppy 55516 0 3c59x 29136 1 (autoclean) sis900 15084 1 (autoclean) nls_iso8859-15 4060 1 (autoclean) nls_cp850 4284 1 (autoclean) vfat 12012 1 (autoclean) fat36760 0 (autoclean) [vfat] supermount 83040 3 (autoclean) ide-cd 33732 0 cdrom 32768 0 [sr_mod ide-cd] ide-scsi 11152 0 usb-storage81060 0 (unused) scsi_mod 105632 2 [sr_mod ide-scsi usb-storage] ehci-hcd 18828 0 (unused) usb-ohci 21144 0 (unused) usbcore73804 1 [usb-storage ehci-hcd usb-ohci] rtc 8940 0 (autoclean) ext3 59920 1 jbd38624 1 [ext3]
[Cooker] [Bug 4776] [blender] blender = Segmentation fault
http://qa.mandrakesoft.com/show_bug.cgi?id=4776 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:04 --- [EMAIL PROTECTED] bjorn]$ rpm -qa | grep -i python python-base-2.3-3mdk libpython2.2-2.2.3-6mdk python-numeric-22.0-4mdk rpm-python-4.2-16mdk python-2.3-3mdk libpython2.3-2.3-3mdk python-imaging-1.1.4-2mdk [EMAIL PROTECTED] bjorn]$ rpm -qa | grep -i blender blender-2.28a-2mdk I have just install blender to test it, but I cant start it.. soo i havent don anything eles than install it. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault Bjørn Jørgensen
[Cooker] [Bug 4776] [blender] blender = Segmentation fault
http://qa.mandrakesoft.com/show_bug.cgi?id=4776 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:08 --- Please remove libpython2.2-2.2.3-6mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault Bjørn Jørgensen
[Cooker] [Bug 5194] [kernel] Mustek GSmartMini2 USB digicamera not recognized
http://qa.mandrakesoft.com/show_bug.cgi?id=5194 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:10 --- could you try to boot with pci=noacpi boot option ? Le mer 10/09/2003 à 22:56, [weiss] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I can not load the digicamera Mustek GSmartMini2. Error messages with GTKam: Bad parameters: Could not list folders in / Bad parameters: Could not initialize camera With MDK9.1 and kernel 2.4.21-x I have no problems.
[Cooker] [Bug 4324] [drakxtools] After Install The Backup list package not work
http://qa.mandrakesoft.com/show_bug.cgi?id=4324 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|[EMAIL PROTECTED]|[EMAIL PROTECTED] Component|Installation|drakbackup Product|Installation|drakxtools Version|1.827 |9.2-9mdk --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:10 --- you mean drakbackup ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: At the en of the install in normal mode the advenced app to save the lis of installed package not work, when i try to backup the lis on floppy he never reconize the floppy (try with 3 news floppy)
[Cooker] [Bug 5466] [Installation] [9.2rc2] Can't launch Mozilla !
http://qa.mandrakesoft.com/show_bug.cgi?id=5466 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] AssignedTo|[EMAIL PROTECTED]|[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:10 --- package list bug -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: During the install of 9.2rc2, Mozilla was not installed like for 9.2rc1. It's very odd because for 9.2rc1 and 9.2rc2 I have checked the same global options for installation ... So i install it with rpmdrake from the Disk. But it can't be executed from the menu and from a console. Nothing append ... and there is no error messages.
[Cooker] [Bug 5348] [evolution-pilot] EToDo conduit not usable and connection time out with palm sync
http://qa.mandrakesoft.com/show_bug.cgi?id=5348 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:12 --- Fix works now, thanks -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hi, first, activating EToDo ends up with the error: Unable to instantiate EEToDo conduit. ToDos ARE added however to evolution. Second, when syncing my palm with evolution (only with contacts and calendar) the palm pilot at the end reports a Connection interrupted, not all data saved. I aam not sure, what data may not be synced or lost. Evolution does not report any error. Using the latest evo, evo-pilot and gnome-pilot from cooker. Can I help more? NDEE
[Cooker] [Bug 5244] [lisa] Lisa bombards the net with packets
http://qa.mandrakesoft.com/show_bug.cgi?id=5244 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:15 --- Yes, it appeared on beta 2 if I remember well, when I reported it. Actually, I know that a class A network is not a good idea, and I have been too lazy to reconfigure my router that was working like this out-of-the-box :) (a Speetouch 510v4) However, sometimes you don't have the cjhoice : at my university we use a class B network and I observed the same problem with a laptop using DHCP to connect on the LAN (strange you cannot reproduce it with 255.255.0.0). I guess the script has to consider this issue : lazy/unskilled people who have a router that gives them a class A IP (which is not uncommon on the market now), and also people who do not control their network. Thanks for looking at it and keep the good work. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have the LAN at 10.0.0.0/8. tcpdump shows that the lisa tries to do an ARP request for probably all addresses in the network and literally bombards the net with packets. I don't know what this might cause on a large network. To add to this it continues these probes even after the LAN interface goes down. This can also result in a costly problem. The following happened to me: - I configured my notebook for GPRS over bluetooth - I removed the LAN card from my notebook so it does not interfere with the experiments - I brought a PPP connection up - The defaultroute was set to ppp0 - The lisa continued to send packets - They all travelled to the phone, generating paid traffic :-( The distribution is Mandrake 9.2 Beta 2 Proposed resolution: don't enable the server by default and document this problem somewhere
[Cooker] [Bug 4776] [blender] blender = Segmentation fault
http://qa.mandrakesoft.com/show_bug.cgi?id=4776 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:16 --- [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault [EMAIL PROTECTED] bjorn]# rpm -qa | grep -i python python-base-2.3-3mdk python-numeric-22.0-4mdk rpm-python-4.2-16mdk python-2.3-3mdk libpython2.3-2.3-3mdk python-imaging-1.1.4-2mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault Bjørn Jørgensen
[Cooker] [Bug 5442] [drakxtools] 9.2RC2 Wireless network card does not start
http://qa.mandrakesoft.com/show_bug.cgi?id=5442 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:20 --- looks like a mismatch between config files for me (ds.o.gz vs orinoco.o.gz) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: I have a Melco wireless card using the orinoco driver. It worked fine in Mdk9.1 In 9.2RC2 it does not start on boot, or with a 'service network restart', but does come up with 'ifup eth0' The ifcfg-eth0 is configured for start on boot and dhcp.
[Cooker] [Bug 4899] [Installation] USB modules do not load
http://qa.mandrakesoft.com/show_bug.cgi?id=4899 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:23 --- Have you tested with the latest kernel from Cooker? We want the output of lspcidrake -v, and the file /var/log/dmesg -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: During installation usb-ehci and usb-ohci do not load (error message pops up)
[Cooker] [Bug 5244] [lisa] Lisa bombards the net with packets
http://qa.mandrakesoft.com/show_bug.cgi?id=5244 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:24 --- IMHO, this (class A network for no specific reason) is bad practise ... Fully agree. Unfortunately many do this - my GPRS provider (no way to change this), LAN side of my ADSL modem/router (maybe hackable but when I tried, other things acted weird - Thomson Speedtouch 510i)... Note: I did NOT have both active at the same time when I tried :-) what interface name is your GPRS? ppp0. It's a plain old pppd, just running over bluetooth instead of the serial line. I will have a new initscript for you before the weekend, I would like you to test it OK, many thanks. (and if you have a LAN at home, see what the advantages are). I have only a small LAN connecting a desktop (Debian unstable), a laptop (with the Mandrake I wanted to give a try) and an ADSL router. I can install the lisa also for the debian and see what it does there. Nothing else (ie WAN) would be affected, since that crosses the subnet boundary At least the case of an ADSL in the bridged mode (i.e. where the linux box itself does the PPPoE and routing) should be investigated. If the lisa sees it as a local ethernet interface, the problem can probably bite here too. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have the LAN at 10.0.0.0/8. tcpdump shows that the lisa tries to do an ARP request for probably all addresses in the network and literally bombards the net with packets. I don't know what this might cause on a large network. To add to this it continues these probes even after the LAN interface goes down. This can also result in a costly problem. The following happened to me: - I configured my notebook for GPRS over bluetooth - I removed the LAN card from my notebook so it does not interfere with the experiments - I brought a PPP connection up - The defaultroute was set to ppp0 - The lisa continued to send packets - They all travelled to the phone, generating paid traffic :-( The distribution is Mandrake 9.2 Beta 2 Proposed resolution: don't enable the server by default and document this problem somewhere
[Cooker] [Bug 4776] [blender] blender = Segmentation fault
http://qa.mandrakesoft.com/show_bug.cgi?id=4776 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:24 --- output of echo $PATH ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault Bjørn Jørgensen
[Cooker] [Bug 5307] [drakxtools] Speedtouch configuration failed
http://qa.mandrakesoft.com/show_bug.cgi?id=5307 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:27 --- - OK for typo - floppy OK when configuring from MCC - not sure about floppy when configuring during Mandrake installation : I had the message mgmt.o copied but it was not present in /usr/share/speeedtouch. I'll try to chech another time. Rq : still need to add by hand alias speedtch off in modules.conf to make speedtouch working (Bug 5056) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: Configuring Internet acces with speedtouch modem : a new interface allow to install mgmt.o file (good idea), but some problems : - translation (french) utiliserer la disquette (cf join file) - using floppy, message impossible de monter fd0 - choice utiliser la partition windows = nothing appens
Re: [Cooker] Mandrake wesite fonts
Okay, thanks to Frederic, we know it's Mr. Duval who should be informed...so I've sent him a mail summarising the thread so far and quoting the more general CSS improvements that were suggested as well. And while he is fixing the site he needs to remember that cute doesn't cut it if you are old enough to buy your own drinks. (i think on the M$ site you have to click past about 7 pages to get to a download and js/java everywhere)
[Cooker] [Bug 5064] [Installation] Nis Setup not working
http://qa.mandrakesoft.com/show_bug.cgi?id=5064 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:30 --- i do not understand. is this an installer bug or an initscripts one (ie a bug while installing or a post-install one) ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: In 9.2 RC1 during install when setting up Nis and after asking for domain name and entering domain name system responds with domain name not defined. System is part of a Nis domain and work perfect with 9.1. Also haveing a bear of a time trying to get Nis to work in 9.2 RC1
[Cooker] [Bug 4776] [blender] blender = Segmentation fault
http://qa.mandrakesoft.com/show_bug.cgi?id=4776 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:30 --- [EMAIL PROTECTED] bjorn]$ echo $PATH /usr//bin:/bin:/usr/bin::/usr/local/bin:/usr/X11R6/bin:/usr/games:/home/bjorn/bin -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: [EMAIL PROTECTED] bjorn]$ blender guessing 'blender' == '/usr//bin/blender' Segmentation fault Bjørn Jørgensen
[Cooker] [Bug 4899] [Installation] USB modules do not load
http://qa.mandrakesoft.com/show_bug.cgi?id=4899 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:30 --- Created an attachment (id=790) -- (http://qa.mandrakesoft.com/attachment.cgi?id=790action=view) dmesg -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: During installation usb-ehci and usb-ohci do not load (error message pops up)
[Cooker] [Bug 4899] [Installation] USB modules do not load
http://qa.mandrakesoft.com/show_bug.cgi?id=4899 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:30 --- Created an attachment (id=791) -- (http://qa.mandrakesoft.com/attachment.cgi?id=791action=view) lspcidrake -v -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: During installation usb-ehci and usb-ohci do not load (error message pops up)
[Cooker] [Bug 4898] [drakxtools] Draboot changes not saved
http://qa.mandrakesoft.com/show_bug.cgi?id=4898 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:32 --- Seems to be fixed in RC2 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hello all, When entering changes to be appended in the boot configuration (lilo) via Drakboot and pressing enter does not actually save the changes.
[Cooker] [Bug 4944] [kernel] [RC1] kernel crashes system when acpi=on
http://qa.mandrakesoft.com/show_bug.cgi?id=4944 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:36 --- tested with RC2 and still does not work. Anything I can do?? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When I boot a system with acpi=on, the system hangs during the boot sequence on checking for new hardware. The computer is a Toshiba Satellite 5200-711. If I skip Harddrake during the boot sequence, the system hangs after i log in.
Re: [Cooker] Mandrake Web Site Fonts
Adam Williamson wrote: On Wed, 2003-09-10 at 19:01, Brant Fitzsimmons wrote: In this case functionality does not dictate that the default fonts look bad. It is possible, and preferred, to have good form and function at the same time. You seem to have lost track of the argument. It moved from should we stop having helvetica as the preferred font? (to which everyone seems to agree the answer is yes) to what should we replace it with?, with some arguing for a specific font - verdana or arial or whatever - followed by sans-serif, with others arguing for the generic alias first, followed by the specific font name. Try looking at the timestamps of the messages before making assumptions about my grasp of the conversation. You'll find that you're about 5 hours too late to make that statement. -- Brant Fitzsimmons [EMAIL PROTECTED] ___ Linux user #322847 | Linux machine #207465 | http://counter.li.org/ AMD Duron 1.3GHz | Mandrake 9.1 | Kernel 2.4.21-0.16mm-mdk KDE 3.1.3 | Mozilla 1.4 Mail Client Uptime: 22:40:00 up 4 days, 9:56, 1 user, load average: 0.08, 0.16, 0.09 ___ All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. -Arthur Schopenhauer (1788-1860)
[Cooker] [Bug 4945] [kernel] [RC1] i810 module will not load
http://qa.mandrakesoft.com/show_bug.cgi?id=4945 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:36 --- Still present in RC2 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Ok, this is kinda related to bug 4944. When I boot with acpi=off, I get an error saying that insmod i810_audio does not work; when i boot with acpi=on, i810_audio loads fine but then i get bug 4944.
[Cooker] [Bug 4903] [drakxtools] improving dns wireless configuration
http://qa.mandrakesoft.com/show_bug.cgi?id=4903 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:35 --- Still no easy way to configure wireless paramaters in RC2 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: There is still no way to configure the DNS without going through the Wizard, it would be nice to add this to the Hostname dialogue box or the Gateway connection box. Also, although my wifi pcmcia card is detected properly, there is also no easy way to configure the wireless parameters without going through the wizard. Finally, Mandrake can detect when a network cable is plugged in or not, so why not use this information to make the network configuration even easier???
Re: [Cooker] Mandrake Web Site Fonts
Then there's the DPI issue. Pt sizes depend on DPI as well as monitor size and resolution, while px sizes only depend on monitor size and resolution. Pt is not an appropriate way to size display fonts: then there is the problem of folks that need to use high res desktops due to aps or wanting the space or but have fair to worse eyesight mines 40/200 (i start to get blurring at about 2 foot) pleas let the user decide how big a dinky font should be
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:38 --- 1) do not use the usbdnet driver. It is *very* buggy and can even crash your machine. Current kernels contain much better usbnet (without the 'd') driver, which works well for 5000D, 5500 and C700 Zaurus. 2) please, consider adding also Zaurus C760 (needs a small patch to the usbnet driver to recognize the different USB ID, which I sent to Juan already). It needs this line for hotplug : usbnet 0x0003 0x04dd 0x9031 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x And the rest is the same. Regards, Jan -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
[Cooker] [Bug 5282] [drakxtools] printerdrake does not fit at minimum size ( toolbar not resize )
http://qa.mandrakesoft.com/show_bug.cgi?id=5282 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|22 |25 Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:40 --- i fixed french translation in drakxtools-9.2-8mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When printerdrake is at minimum size toolbar is not resize and so you have several icons which are hidden. see screenshot drakxtools-9.2-7mdk
[Cooker] [Bug 4898] [drakxtools] Draboot changes not saved
http://qa.mandrakesoft.com/show_bug.cgi?id=4898 [EMAIL PROTECTED] changed: What|Removed |Added Status|RESOLVED|UNCONFIRMED Resolution|FIXED | --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:40 --- Thought it was fixed. Here are the steps (with lilo). Launch drakboot check the acpi box click ok look at the parameters for the default kernel, no acpi=on -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hello all, When entering changes to be appended in the boot configuration (lilo) via Drakboot and pressing enter does not actually save the changes.
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:43 --- Created an attachment (id=792) -- (http://qa.mandrakesoft.com/attachment.cgi?id=792action=view) Patch for usbnet.c -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
[Cooker] [Bug 4944] [kernel] [RC1] kernel crashes system when acpi=on
http://qa.mandrakesoft.com/show_bug.cgi?id=4944 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:44 --- have you tried flashing your BIOS? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When I boot a system with acpi=on, the system hangs during the boot sequence on checking for new hardware. The computer is a Toshiba Satellite 5200-711. If I skip Harddrake during the boot sequence, the system hangs after i log in.
[Cooker] [Bug 5501] [gnome-pilot] New: Problem snycing with Palm(Sony Clie625)
http://qa.mandrakesoft.com/show_bug.cgi?id=5501 Product: gnome-pilot Component: program Summary: Problem snycing with Palm(Sony Clie625) Product: gnome-pilot Version: 2.0.10-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: program AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Hi, I am syncing my Clie with Evolution (1.4.4-7) with addressbook, todo, calendar. After syncing and saying Reorganizing data the palm report HotSync problem - connection with desktop interrupted. Some data are not saved. I cannot see any data missing (yet), but it worries me. I only choose the evo-conduits currently to sync with. NDEE -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5502] [Installation] New: Installation 9.2 RC2 failed
http://qa.mandrakesoft.com/show_bug.cgi?id=5502 Product: Installation Component: Installation Summary: Installation 9.2 RC2 failed Product: Installation Version: 1.833 Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I tried installing Mandrake 9.2 RC2 on an IBM Thinkpad T21 already running Mandrake 9.1. and it did not work. The following problems were observed. 1. During installation, it found my two partitions but could not identify the legacy mount points (i.e. / and /home) so I had to enter them manually. 2. The install never displayed the upgrade option as it has in the past it simply went into a normal install mode where packages have to be selected. 3. During the install it displayed searching for packages but afterwards it displayed the normal Mandrake install screen with the normal default boxes selected (it didn't detect installed packages because I had every package under every category except Server installed under Mandrake 9.1). 4. After the installation completed and the computer rebooted I was taken to the logon screen which I logged into and chose KDE but KDE never started. Instead I received the following error The following installation problem was detected while trying to start KDE: No write access to /home/brian/.ICEauthority. KDE is unable to start. I was then taken back to the logon screen where I logged in and chose Gnome but Gnome also would not start. Instead I received the following error The files that contain your preference settings are in use. You might be logged in to a session from another computer, and the other logon session is using your preference settings. When I press the continue button I receive Please contact your system administrator to resolve the following problem. Could not resolve the address xml:readwrite:/home/brian/.gconf in the configuration file /etc/gconf/2/path:Couldn't resolve address for configuration source Can't read or write to the XML root directory in the address xml:readwrite:/home/brian/.gconf. Thought I would pass this information on. Right now I don't have a working version of Mandrake 9.2 RC2 on my laptop. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5503] [drakxtools] New: keyboardrake doesn't change my XF86Config-4
http://qa.mandrakesoft.com/show_bug.cgi?id=5503 Product: drakxtools Component: keyboardrake Summary: keyboardrake doesn't change my XF86Config-4 Product: drakxtools Version: 9.2-9mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: keyboardrake AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Hi, I've an azerty laptop and an USB qwerty keyboard (at home), so I often change my keyboard layout. I usualy do it before launching X, just after the login. It seems that keyboardrake doesn't change my X config file. I mean if I choose us-international, the console mode is OK, but when start X via gdm or Xtart, I'm still in french layout. I must change it in XF86Config-4. As I've play a lot with this file for 3D with radeonM6, I was first thinking about a permission problem. I doesn't look so : [EMAIL PROTECTED] fabien]# ll /etc/X11/XF86Config-4 -rw-rw-r--1 root root 3652 sep 10 19:48 /etc/X11/XF86Config-4 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 4312] [Glide_V5] glide is broken. no hardware acceleration!
http://qa.mandrakesoft.com/show_bug.cgi?id=4312 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:53 --- [EMAIL PROTECTED] bjorn]$ et ET 2.55 linux-i386 May 27 2003 - FS_Startup - Current search path: /home/bjorn/.etwolf/etmain /usr/local/games/enemy-territory/etmain/pak0.pk3 (3725 files) /usr/local/games/enemy-territory/etmain/mp_bin.pk3 (4 files) /usr/local/games/enemy-territory/etmain -- 3729 files in pk3 files execing default.cfg couldn't exec language.cfg execing profiles/grusapa/etconfig.cfg couldn't exec autoexec.cfg Hunk_Clear: reset the hunk ok --- Input Initialization --- Joystick is not active. Bypassing CD checks - Client Initialization - - Initializing Renderer --- - Client Initialization Complete - - R_Init - ...loading libGL.so.1: Initializing OpenGL display ...setting mode 3: 640 480 Using XFree86-VidModeExtension Version 2.2 XF86DGA Mouse (Version 2.0) initialized XFree86-VidModeExtension Activated at 640x480 Using 4/4/4 Color bits, 24 depth, 0 stencil display. GL_RENDERER: Mesa GLX Indirect *** You are using software Mesa (no hardware acceleration)! Driver DLL used: libGL.so.1 If this is intentional, add +set r_allowSoftwareGL 1 to the command line when starting the game. *** ...WARNING: could not set the given mode (3) - CL_Shutdown - RE_Shutdown( 1 ) --- - CL_Shutdown - --- Sys_Error: GLimp_Init() - could not load OpenGL subsystem [EMAIL PROTECTED] bjorn]$ rpm -qa | grep -i glide XFree86-glide-module-4.3-22mdk Glide_V5-cvs-6mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: [EMAIL PROTECTED] bjorn]$ et ET 2.55 linux-i386 May 27 2003 - FS_Startup - Current search path: /home/bjorn/.etwolf/etmain/etmapcycle.pk3 (3 files) /home/bjorn/.etwolf/etmain /usr/local/games/enemy-territory/etmain/pak0.pk3 (3725 files) /usr/local/games/enemy-territory/etmain/mp_bin.pk3 (4 files) /usr/local/games/enemy-territory/etmain -- 3732 files in pk3 files execing default.cfg couldn't exec language.cfg execing profiles/grusapa/etconfig.cfg couldn't exec autoexec.cfg Hunk_Clear: reset the hunk ok --- Input Initialization --- Joystick is not active. Bypassing CD checks - Client Initialization - - Initializing Renderer --- - Client Initialization Complete - - R_Init - ...loading libGL.so.1: Initializing OpenGL display ...setting mode 3: 640 480 Using XFree86-VidModeExtension Version 2.2 XF86DGA Mouse (Version 2.0) initialized XFree86-VidModeExtension Activated at 640x480 Loading required GL library /usr/X11R6/lib/libGL.so.1.2 Using 4/4/4 Color bits, 24 depth, 0 stencil display. GL_RENDERER: Mesa GLX Indirect *** You are using software Mesa (no hardware acceleration)! Driver DLL used: libGL.so.1 If this is intentional, add +set r_allowSoftwareGL 1 to the command line when starting the game. *** ...WARNING: could not set the given mode (3) - CL_Shutdown - RE_Shutdown( 1 ) --- - CL_Shutdown - --- Sys_Error: GLimp_Init() - could not load OpenGL subsystem but in v3 [EMAIL PROTECTED] bjorn]$ et ET 2.55 linux-i386 May 27 2003 - FS_Startup - Current search path: /home/bjorn/.etwolf/etmain/etmapcycle.pk3 (3 files) /home/bjorn/.etwolf/etmain /usr/local/games/enemy-territory/etmain/pak0.pk3 (3725 files) /usr/local/games/enemy-territory/etmain/mp_bin.pk3 (4 files) /usr/local/games/enemy-territory/etmain -- 3732 files in pk3 files execing default.cfg couldn't exec language.cfg execing profiles/grusapa/etconfig.cfg couldn't exec autoexec.cfg Hunk_Clear: reset the hunk ok --- Input Initialization --- Joystick is not active. Bypassing CD checks - Client Initialization - - Initializing Renderer --- - Client Initialization Complete - - R_Init - ...loading libGL.so.1: Initializing OpenGL display ...setting mode 3: 640 480 Using XFree86-VidModeExtension Version 2.2 XF86DGA Mouse (Version 2.0) initialized XFree86-VidModeExtension Activated at 640x480 Loading required GL library /usr/X11R6/lib/libGL.so.1.2 Using 4/4/4 Color bits, 24 depth, 0 stencil display. GL_RENDERER: Mesa DRI 20020221 Voodoo4
[Cooker] [Bug 4944] [kernel] [RC1] kernel crashes system when acpi=on
http://qa.mandrakesoft.com/show_bug.cgi?id=4944 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:53 --- Tested with 2.4.22-7mdk and still does not work. Furthermore, had to do a hard reboot when the system blocked on Checking for new hardware and this completely hosed up my system, nothing works now. Note that acpi worked fine in 9.1. Have updated my bios to 1.40 but now i need to re-install MDK before I can report if this worked or not :-) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When I boot a system with acpi=on, the system hangs during the boot sequence on checking for new hardware. The computer is a Toshiba Satellite 5200-711. If I skip Harddrake during the boot sequence, the system hangs after i log in.
[Cooker] [Bug 5485] [Installation] Progress bar color
http://qa.mandrakesoft.com/show_bug.cgi?id=5485 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:55 --- Created an attachment (id=793) -- (http://qa.mandrakesoft.com/attachment.cgi?id=793action=view) fix #5485 only tested in standalone mode (not in install mode) this is the bit of the differences between current galaxy-gnome install galaxy theme ressources files -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Progress bar during installation of packages is grey. It should use Mandrake theme. It should so be blue. As far I know, it is related to a hardcoded color in one or more widget.
[Cooker] [Bug 4975] [suspend-scripts] [RC1] Mouse and suspend
http://qa.mandrakesoft.com/show_bug.cgi?id=4975 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:57 --- will try it as soon as i can get acpi working (c.f. bug 4944) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Hi, I can put my computer into software suspend fine and i can come out fine, but when i come out of hibernate, the mouse is stuck and does not move. KDE is not crashed cause working through the keybord works fine. BTW, what is K-Suspend Computer linked to i.e. which command does it run?? Emmanuel
[Cooker] [Bug 5464] [drakconf] DrakDM don't displays some DMs
http://qa.mandrakesoft.com/show_bug.cgi?id=5464 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:00 --- quoting drakxtools package changelog: = * Sun Aug 31 2003 Thierry Vignaud [EMAIL PROTECTED] 9.2-6mdk (...) - drakedm: in non expert mode, only display the list of *installed* display managers (...) quoting drakedm cvs log: in non expert mode, only display the list of *installed* display managers. (interface team request) if no dm is installed, then switch back to expert mode behaviour and display all dm and install them if needed. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: RC2: DrakDM don't displays in menu complete list of available displaymanagers (XDM/KDM/MdkKDM/GDM) but displays only installed displaymanagers. I think this is bug, not feature.
[Cooker] [Bug 5479] [xmms] no sound in RC2
http://qa.mandrakesoft.com/show_bug.cgi?id=5479 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|1934|97 Status|UNCONFIRMED |ASSIGNED --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:10 --- please follow the instructions listed in thoubleshooting window of draksound and at: http://qa.mandrakesoft.com/twiki/bin/view/Main/HardwareHowTo#Sound_Cards -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: I don't have any sound at all with RC2. Sound card is well recognized and xmms (and others) don't put any errors. It just doesn't work snd-cs46xx : Cirrus Logic|CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] [MULTIMEDIA_AUDIO] [EMAIL PROTECTED] mnt]# lsmod Module Size Used byNot tainted snd-seq-midi4800 0 (autoclean) (unused) snd-seq-oss31808 0 (unused) snd-seq-midi-event 6016 0 [snd-seq-midi snd-seq-oss] snd-seq42320 2 [snd-seq-midi snd-seq-oss snd-seq-midi-event] snd-pcm-oss43428 0 snd-mixer-oss 14232 0 [snd-pcm-oss] snd-cs46xx 77480 2 snd-ac97-codec 44824 0 [snd-cs46xx] snd-rawmidi17664 0 [snd-seq-midi snd-cs46xx] snd-seq-device 5672 0 [snd-seq-midi snd-seq-oss snd-seq snd-rawmidi] snd-pcm78692 0 [snd-pcm-oss snd-cs46xx] snd-timer 18276 0 [snd-seq snd-pcm] gameport3268 0 [snd-cs46xx] snd-page-alloc 8948 0 [snd-cs46xx snd-pcm] snd40836 2 [snd-seq-midi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cs46xx snd-ac97-codec snd-rawmidi snd-seq-device snd-pcm snd-timer] soundcore 6308 0 [snd]
[Cooker] [Bug 5482] [libdvdread3] seems like libdvdread.so.2 is missing in rc2
http://qa.mandrakesoft.com/show_bug.cgi?id=5482 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:10 --- This is not a bug. All applications in Mandrake that use libdvdread were built with libdvdread3. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I had to download and install it manualy.
[Cooker] [Bug 5493] [drakconf] Configuration problems in the User menu
http://qa.mandrakesoft.com/show_bug.cgi?id=5493 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:10 --- worksforme but i've xhosted my x server sometimes ago. i guess we've fall on the same old bug (aka x11 cookie not used by forked program) since we run sg like: su username -c /usr/bin//menudrake instead of: su username -c /usr/bin//menudrake -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Procedure to reproduce : * Launch Menudrake from the MCC * In User menu, click on an user of your choice. * Then click on configure. The configure menu doesn't lauch.
[Cooker] [Bug 5495] [harddrake] draksound should use option menu for drivers selection
http://qa.mandrakesoft.com/show_bug.cgi?id=5495 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:10 --- as for combo vs optionmenu: draksound already use pull down menu instead of non editable combo since Jul 24 2003 (drakxtools-9.2-0.22mdk) !!! as for layou: i agree that it should display the current sound driver in the list too in order to not confuse users. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: draksound use a non editable combo for driver selection when you want to switch from alsa to OSS. draksound'd better use option menu showing both drivers ( OSS/ALSA ) with the current drivers selected and precise which one is recommended. The layout could be for exemple as this ( emu10k1 ) : [ALSA] snd-emu10k1 ( recommended ) [OSS] emuk10k1 1°/ This will facilitate translation ( there is only recommended to translate ) and be less confusing ( see #5403 ) as it seems that people seems to not read at all or completly the notice at the top. 2°/ you don't expect that the user will enter by hand the driver module name, if he want to select another one it will go to let me pick another driver, so option menu is more obvious/sensible.
[Cooker] [Bug 5504] [kernel] New: atmarpd causes kernel oops (net/atm/clip.c)
http://qa.mandrakesoft.com/show_bug.cgi?id=5504 Product: kernel Component: default Summary: atmarpd causes kernel oops (net/atm/clip.c) Product: kernel Version: 2.4.22-7mdk Platform: All OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: default AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] To reproduce: atmarpd -b -l syslog (atmarpd is from the linux-atm package; you need to configure ATM support and CLIP - classical IP over ATM). I think this is a known bug in 2.4.22 - a patch was posted on the linux-atm mailing list (http://sourceforge.net/mailarchive/forum.php?thread_id=3045331forum_id=7159) and went into 2.4.23-pre. Here is the oops: Unable to handle kernel NULL pointer dereference at virtual address 0010 printing eip: c031b5b6 *pde = Oops: 0002 sg isofs udf parport_pc lp parport radeon agpgart snd-seq-oss snd-seq-midi-event snd-seq snd-via82xx snd-mpu401-uart snd-pcm-oss snd-mixer-oss snd-cs46xx snd-ac97-codec snd-rawmidi snd-seq-device snd-pcm snd-timer gameport snd-page-alloc snd nfsd af_packet sr_mod floppy 8139too mii nls_iso8859-15 nls_cp850 vfat fat supermount reiserfs ide-cd cdrom tuner tvaudio bttv videodev i2c-algo-bit soundcore i2c-core ide-scsi scsi_mod speedtch printer ehci-hcd usb-uhci usbcore rtc ext3 jbd CPU:0 EIP:0010:[atm_ioctl+1718/3168]Not tainted EIP:0010:[c031b5b6]Not tainted EFLAGS: 00210246 EIP is at atm_ioctl+0x6b6/0xc60 [kernel] eax: ebx: df978a00 ecx: c014663c edx: esi: df978a00 edi: 0100 ebp: cef6ccc0 esp: d16fff28 ds: 0018 es: 0018 ss: 0018 Process atmarpd (pid: 3463, stackpage=d16ff000) Stack: d3a27b20 d4733120 c02c01d2 0004 d4733120 3830315b 005d3139 df9b60e0 dfcd5005 0003 0028f3c6 c02021da 00200292 d16fff3c 0007 2a8b 0804edc9 0004 61e1 d4733120 ffe7 c02c080a Call Trace: [sock_map_fd+242/368] sock_map_fd+0xf2/0x170 [kernel] [c02c01d2] sock_map_fd+0xf2/0x170 [kernel] [getname+74/176] getname+0x4a/0xb0 [kernel] [c02021da] getname+0x4a/0xb0 [kernel] [sock_ioctl+26/32] sock_ioctl+0x1a/0x20 [kernel] [c02c080a] sock_ioctl+0x1a/0x20 [kernel] [sys_ioctl+148/560] sys_ioctl+0x94/0x2a0 [kernel] [c0206164] sys_ioctl+0x94/0x2a0 [kernel] [system_call+51/64] system_call+0x33/0x40 [kernel] [c01bc063] system_call+0x33/0x40 [kernel] Code: ff 48 10 a1 74 07 19 c0 8b 40 18 8b 48 14 83 c9 08 89 48 14 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5446] [Installation] md5sum of CD1 doesn't match the 9.2rc2.md5sums.asc Value
http://qa.mandrakesoft.com/show_bug.cgi?id=5446 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:11 --- well I've got : cat 9.2rc2.md5sums.asc ;md5sum Ma* -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 9725a5942d84390c691d78f95084b5ee MandrakeLinux-9.2rc2-CD1.i586.iso 78374f7ff4335f5b46b3cd7d8e2f3e94 MandrakeLinux-9.2rc2-CD2.i586.iso 70de3baa4a1e3f3c0229bed38b237d8a MandrakeLinux-9.2rc2-CD3.i586.iso -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/Xa+k54mK4HB3H/MRAmzKAJ9kiPESsZqHNQO49qVWR4X09q87uwCgpzKp GSCtMRg0BVu9qEani1hGrc8= =5Y5U -END PGP SIGNATURE- 837096bf416456acbfa49978dc184c2a MandrakeLinux-9.2rc2-CD1.i586.iso 4adc71c6d4e76290ac023b912d6d31ea MandrakeLinux-9.2rc2-CD2.i586.iso 16b91f9fb68064390b501366e6b96ba4 MandrakeLinux-9.2rc2-CD3.i586.iso which one is correct ? from ftp://mandrake.mirrors.pair.com/mandrake-iso/i586 I think none as I get an error at installation Could not uncompress second stage ramdisk. This is probabl an hardware error whle reading the data. (this may be caused by a hardware failure or a Linux kernel bug) only one button : Ok (reminds me of another OS...) In a window : error in exec of stage 2 :-( trying to execute '/usr/bin/runinstall2' from the installation volume, the following fatal error occured FATAL ERROR IN STAGE1: I/O error in a text display : I can't recover from this. You may reboot your system. well, I'm downloading again... trying to get correct checksum, see you in 3h... -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hi, the md5sum of image 1 doesn't match the one in the File! I downloaded the image from Dresden (twice) and Lyon so I'am quite shure that it wasn't a simple ftp comunication error. Br Dirk Pütz
[Cooker] [Bug 2242] [Installation] Back bottum in Graphical install.
http://qa.mandrakesoft.com/show_bug.cgi?id=2242 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] Status|UNCONFIRMED |RESOLVED Resolution||LATER --- Additional Comments From [EMAIL PROTECTED] 2003-29-08 18:26 --- No activity has been seen on this bug since 20030223 and it is still in UNCONFIRMED state. This probably means that the information provided was not clear enough, or that the bug is not valid anymore. Please test and confirm that this bug is still valid with the latest cooker version, or close it. --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:16 --- i agree. but we've to postpone to next releases -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: It would be nice to have a back bottum in all graphical install windows. Then it would be possible to navigate through the entire installation process without having a mouse attached.
[Cooker] [Bug 5056] [speedtouch] speedtouch configuration not always right
http://qa.mandrakesoft.com/show_bug.cgi?id=5056 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:16 --- Got the bug too. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Impossible to connect to the internet after I pasted the Alcatel microcode in the Speedtouch folder. The modem gives no response...
[Cooker] [Bug 2242] [Installation] Back bottum in Graphical install.
http://qa.mandrakesoft.com/show_bug.cgi?id=2242 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:17 --- i agree. but we've to postpone to next releases. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: It would be nice to have a back bottum in all graphical install windows. Then it would be possible to navigate through the entire installation process without having a mouse attached.
[Cooker] [Bug 5505] [evolution] New: Cannot switch to calendar, addressbook etc. after sync
http://qa.mandrakesoft.com/show_bug.cgi?id=5505 Product: evolution Component: program Summary: Cannot switch to calendar, addressbook etc. after sync Product: evolution Version: 1.4.4-5mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: critical Priority: P1 Component: program AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Hi Frederic, again me - now as the conduits work, the following problem is there: When I leave evo open while syncing and I try to switch to calendar or contacts etc. after sync is finished, evo freezes. Without syncing I can switch as I like. I have to run evo --force-shutdown and restart evo. NDEE -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5307] [drakxtools] Speedtouch configuration failed
http://qa.mandrakesoft.com/show_bug.cgi?id=5307 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:18 --- Got the bug too. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: Configuring Internet acces with speedtouch modem : a new interface allow to install mgmt.o file (good idea), but some problems : - translation (french) utiliserer la disquette (cf join file) - using floppy, message impossible de monter fd0 - choice utiliser la partition windows = nothing appens
[Cooker] [Bug 5495] [harddrake] draksound should use option menu for drivers selection
http://qa.mandrakesoft.com/show_bug.cgi?id=5495 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEEDINFO|RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:18 --- *** This bug has been marked as a duplicate of 5403 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: draksound use a non editable combo for driver selection when you want to switch from alsa to OSS. draksound'd better use option menu showing both drivers ( OSS/ALSA ) with the current drivers selected and precise which one is recommended. The layout could be for exemple as this ( emu10k1 ) : [ALSA] snd-emu10k1 ( recommended ) [OSS] emuk10k1 1°/ This will facilitate translation ( there is only recommended to translate ) and be less confusing ( see #5403 ) as it seems that people seems to not read at all or completly the notice at the top. 2°/ you don't expect that the user will enter by hand the driver module name, if he want to select another one it will go to let me pick another driver, so option menu is more obvious/sensible.
[Cooker] [Bug 5403] [harddrake] [9.2 RC 1] Confusing GUI in harddrake2's Sound Configuration tool
http://qa.mandrakesoft.com/show_bug.cgi?id=5403 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:18 --- *** Bug 5495 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Problem: confusing GUI. For my hardware (G732 notebook, see greenhat.blogspot.com), harddrake shows the module as snd-intel8x0. When I 'Run config tool' (Sound configuration = DrakSound?) the 'Driver:' dropdown list has no pre-selected value, showing the first listed driver (= ali5455 - not, in my case, the active driver, which is i810_audio). I was confused by this, and wasted hours trying to re-configure the sound system because I thought that the active driver was the one shown in the dropdown field! I expected the current/active driver to be pre-selected, and acted accordingly (wrongly).
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:20 --- shouldn't this id be exported by usbdnet into /lib/modules/kernel_version/modules.usbmap instead? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
[Cooker] [Bug 1606] [Hardware] On-board Crystal Multimedia audio controller not detected
http://qa.mandrakesoft.com/show_bug.cgi?id=1606 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:24 --- we do not probe for isa sound cards since it resulted in the past in hang on modern machines. you can configure an isa sound card through the sndconfig program (sndconfig package) or alsaconf[1] (alsa-utils package) [1] only since mdk9.2rc2 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: This applies to MDK 9.1 beta 3. System: Dell Precision Workstation 610 MT, dual Pentium II-450MHz with on-board Crystal sound card. MDK 9.1-B3 does not detect any sound card at all here. Trying with other Linux distros: RedHat 8.0: Kudzu finds new hardware - CS4236B on first boot after installation. I didn't get it to work with KDE, though. SuSE 8.1 Live-Eval (running from demo CD only): finds new hardware - Crystal Multimedia audio controller after logging in on KDE. No sound server connected to it, though. Apparently, this sound card has worked on Mandrake distros before, see: http://www.experts-exchange.com/Operating_Systems/Linux/Q_11422758.html Crystal Semiconductor is owned by Cirrus Logic. Announcement of use of their chips by Dell here: http://www-test.cirrus.com/en/press/releases/P105.html
[Cooker] [Bug 5505] [evolution] Cannot switch to calendar, addressbook etc. after sync
http://qa.mandrakesoft.com/show_bug.cgi?id=5505 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:26 --- ... if I sync even with evo closed (but not with --force-shutdown) and I try to restart evo, it fails. Yet I have to run --force-shutdown and restart evo. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi Frederic, again me - now as the conduits work, the following problem is there: When I leave evo open while syncing and I try to switch to calendar or contacts etc. after sync is finished, evo freezes. Without syncing I can switch as I like. I have to run evo --force-shutdown and restart evo. NDEE
[Cooker] [Bug 5506] [kde-i18n-sv] New: Missing translations for Swedish
http://qa.mandrakesoft.com/show_bug.cgi?id=5506 Product: kde-i18n-sv Component: i18n Summary: Missing translations for Swedish Product: kde-i18n-sv Version: 3.1.3-1mdk Platform: All OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: i18n AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] In the K menu hierarchy: I installed with Swedish default locale and UTF8 plus Japanese as an additional locale. K-menu -Konfiguration [i.e. configuration) : |-Paketering [packaging] | |- Browse available software - Should be Bläddra bland installerade program | |-Configure your computer - Should be Konfigurera din dator |-Configure your desktop - Should be Konfigurera ditt skrivbord -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5505] [evolution] Cannot switch to calendar, addressbook etc. after sync
http://qa.mandrakesoft.com/show_bug.cgi?id=5505 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:30 --- ... huh ... finally I figured out that the title field in evo will not be synced to my palm. All other fields look OK so far. NDEE -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi Frederic, again me - now as the conduits work, the following problem is there: When I leave evo open while syncing and I try to switch to calendar or contacts etc. after sync is finished, evo freezes. Without syncing I can switch as I like. I have to run evo --force-shutdown and restart evo. NDEE
[Cooker] [Bug 5340] [gkrellm] Fonts look very ugly in gkrellm ...
http://qa.mandrakesoft.com/show_bug.cgi?id=5340 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:34 --- Looks better in RC2 Close the bug -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Fonts look very ugly in gkrellm
[Cooker] [Bug 5064] [Installation] Nis Setup not working
http://qa.mandrakesoft.com/show_bug.cgi?id=5064 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:37 --- Both actualy. During install when trying to setup nis it keeps saying domain not bound. At that point your put into a loop and the only way to get out is to change back to local files under the advance option when defining the root passwd. When system is totally installed I can't get nis to work at all untill I copy the /etc/init.d/network file from 9.1 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: In 9.2 RC1 during install when setting up Nis and after asking for domain name and entering domain name system responds with domain name not defined. System is part of a Nis domain and work perfect with 9.1. Also haveing a bear of a time trying to get Nis to work in 9.2 RC1
[Cooker] [Bug 5423] [drakxtools] Settings in the printer management tool do not take
http://qa.mandrakesoft.com/show_bug.cgi?id=5423 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:46 --- Please update drakxtools to 9.2-10mdk from the Cooker to get the fix for this bug. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: After setting up photosmart 7550, tried to change the paper type in the default settings. Changed page size to 4x6 w/tear off tab. Changed paper type to photo and changed double sided printing to off. After choosing ok, clicked Do It again to verify settings and the paper type was again set to Draft.
[Cooker] [Bug 5507] [kde-i18n-sv] New: Missing translations in context menu
http://qa.mandrakesoft.com/show_bug.cgi?id=5507 Product: kde-i18n-sv Component: kde-i18n-sv Summary: Missing translations in context menu Product: kde-i18n-sv Version: 3.1.3-1mdk Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: kde-i18n-sv AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Right-clicking in konqueror gives the submenu Actions. Should be translated into Åtgärder. Beneath that menu is archving-related menu items in english. Depending on context these are: Archive Arkivera Zip this directory Packa denna katalog i zip-format -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] Error updating Samba-client
I got this error while updating packages tonight. error: %preun(samba-client-2.2.8a-12mdk) scriptlet failed, exit status 1 What other info can I provide. I don't see any log entries. -- /g Outside of a dog, a man's best friend is a book, inside a dog it's too dark to read -Groucho Marx
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:54 --- Actually it is (at least on my machine), at least for 5500 Zaurus. C760 still needs the patch. I am not sure, how exactly hotplug works (is there some documentation ??), the line in usb.handmap should allow hotplug to recognize the device and load the proper driver. Jan -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
Re: [Cooker] Installing to SATA drives
On Tuesday 09 September 2003 09:25 pm, Jeff Shultz wrote: drive. On the first stage install, it mentions that that hard drive is losing the interrupt frequently as it works it's way through. That's the kind of thing that happens when i/o apic and/or acpi is not working properly. What mobo chipset do you have? Try booting with apic disabled (noapic) and acpi=off -- /g Outside of a dog, a man's best friend is a book, inside a dog it's too dark to read -Groucho Marx
Re: [Cooker] Installing to SATA drives
On Wednesday 10 September 2003 12:30 pm, Jeff Shultz wrote: On Wed, 2003-09-10 at 04:51, Greg Meyer wrote: On Tuesday 09 September 2003 09:25 pm, Jeff Shultz wrote: drive. On the first stage install, it mentions that that hard drive is losing the interrupt frequently as it works it's way through. That's the kind of thing that happens when i/o apic and/or acpi is not working properly. What mobo chipset do you have? Try booting with apic disabled (noapic) and acpi=off nForce2 400 Ultra. It's a Gigabyte 7NNXP mobo. The SATA chipset is a SI3112. As for the noapic and acpi=off, this is a bit hard to do when I'm booting from the install CD-ROM's. Hmmm all the sudden I'm inspired to go looking for floppy images which doesn't help at all since that isn't how they work, apparently. Hit f1 at the splash and type linux noapic acpi=off -- /g Outside of a dog, a man's best friend is a book, inside a dog it's too dark to read -Groucho Marx
[Cooker] [Bug 5508] [evolution] New: Cannot add ldap addreessbook running on openldap/mdk
http://qa.mandrakesoft.com/show_bug.cgi?id=5508 Product: evolution Component: program Summary: Cannot add ldap addreessbook running on openldap/mdk Product: evolution Version: 1.4.4-5mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: critical Priority: P2 Component: program AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Hi again - now I noticed, that I cannot add any ldap directory running on a mdk9.1 machine. Nothing will be searched and displayed. I do not even get asked for a password when defining login by dn. When I use Use SSL/TLS if possbile, evo addressbook component dies even though, slapd is running with TLS. NDEE -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] kernel-tmb-2.4.22.7.tmb.1mdk
Adam Williamson kirjoitti viestissn (lhetysaika Torstai 11. Syyskuuta 2003 02:24): On Wed, 2003-09-10 at 21:43, Michael Lothian wrote: Blimey you have been a busy boy Uh, not to take away from Thomas' hard work, but most of the stuff in the changelog is just stuff that's changed in the main kernel since he last built it. Everything below: - sync with 2.4.22-7mdk is stuff from the main Cooker kernel, not stuff Thomas has done himself. So basically the only changes in the tmb patchset are - a fix to the Rusty's brain broke thing and updates for firewire, alsa and cifs. still nice, though! :) Yep. I needed to get in sync with main kernel first, before I started to add more patches... the next build is already building, so hopefully there will be a new kernel out tonight... -- Regards Thomas
[Cooker] [Bug 5498] [kernel] RC2 Sound module problems (snd-cmipci).
http://qa.mandrakesoft.com/show_bug.cgi?id=5498 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 00:59 --- Here is the output: [EMAIL PROTECTED] willemse]# lspcidrake -v | fgrep AUDIO snd-cmipci : C-Media Electronics Inc|CM8738 [MULTIMEDIA_AUDIO] (vendor:13f6 device:0111) [EMAIL PROTECTED] willemse]# grep sound-slot /etc/modules.conf alias sound-slot-0 snd-cmipci alias sound-slot-1 cmpci [EMAIL PROTECTED] willemse]# /sbin/lsmod Module Size Used byNot tainted parport_pc 25352 1 (autoclean) lp 8128 0 (autoclean) parport34376 1 (autoclean) [parport_pc lp] ipt_TOS 1592 12 (autoclean) ipt_REJECT 3928 4 (autoclean) ipt_LOG 4120 6 (autoclean) ipt_state 1048 13 (autoclean) ipt_multiport 1176 0 (autoclean) ipt_conntrack 1528 0 (autoclean) iptable_filter 2316 1 (autoclean) iptable_mangle 2712 1 (autoclean) iptable_nat20718 0 (autoclean) (unused) ip_conntrack 26212 3 (autoclean) [ipt_state ipt_conntrack iptable_nat] ip_tables 15072 11 [ipt_TOS ipt_REJECT ipt_LOG ipt_state ipt_multiport ipt_conntrack iptable_filter iptable_mangle iptable_nat] snd-pcm-oss43428 0 snd-mixer-oss 14232 0 [snd-pcm-oss] snd-cmipci 23448 0 snd-pcm78692 0 [snd-pcm-oss snd-cmipci] snd-page-alloc 8948 0 [snd-pcm] snd-mpu401-uart 4608 0 [snd-cmipci] snd-rawmidi17664 0 [snd-mpu401-uart] snd-opl3-lib7908 0 [snd-cmipci] snd-timer 18276 0 [snd-pcm snd-opl3-lib] snd-seq-device 5672 0 [snd-rawmidi snd-opl3-lib] snd-hwdep 6240 0 [snd-opl3-lib] snd40836 0 [snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-mpu401-uart snd-rawmidi snd-opl3-lib snd-timer snd-seq-device snd-hwdep] soundcore 6308 0 [snd] nfsd 74544 8 (autoclean) af_packet 14824 0 (autoclean) floppy 55516 0 8139too17160 1 (autoclean) mii 3784 0 (autoclean) [8139too] nls_cp437 5116 2 (autoclean) vfat 12012 2 (autoclean) fat36760 0 (autoclean) [vfat] nls_utf81280 3 (autoclean) ntfs 78476 1 (autoclean) supermount 83040 3 (autoclean) ide-cd 33732 0 sr_mod 19384 0 cdrom 32768 0 [ide-cd sr_mod] ide-scsi 11152 0 sd_mod 13740 2 scsimon 9120 0 (unused) usbmouse2936 0 (unused) keybdev 2724 0 (unused) mousedev5460 1 usb-storage81828 1 scsi_mod 105632 5 [sr_mod ide-scsi sd_mod scsimon usb-storage] mod_quickcam 102976 0 hid24068 0 (unused) videodev7840 1 [mod_quickcam] input 5632 0 [usbmouse keybdev mousedev hid] usb-uhci 25040 0 (unused) usbcore74476 1 [usbmouse usb-storage mod_quickcam hid usb-uhci] rtc 8940 0 (autoclean) ext3 59920 2 jbd38624 2 [ext3] [EMAIL PROTECTED] willemse]# /sbin/chkconfig --list sound sound 0:off 1:off 2:on3:on4:on5:on6:off [EMAIL PROTECTED] willemse]# /sbin/chkconfig --list alsa alsa0:off 1:off 2:off 3:off 4:off 5:off 6:off [EMAIL PROTECTED] willemse]# aumix -q bash: aumix: command not found [EMAIL PROTECTED] willemse]# /sbin/fuser -v /dev/dsp -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting RC2 the following lines appear in /var/log/messages: Sep 10 19:20:00 one sound: Loading sound module (snd-cmipci) succeeded Sep 10 19:20:01 one kernel: cmpci: version $Revision: 6.16 $ time 18:25:55 Sep 7 2003 Sep 10 19:20:01 one modprobe: lib/modules/2.4.22-6mdk/kernel/drivers/sound/ cmpci.o.gz: Sep 10 19:20:01 one modprobe: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. Sep 10 19:20:01 one modprobe: You may find more information in syslog or the output from dmesg Sep 10 19:20:01 one modprobe: init_module: No such device Sep 10 19:20:01 one modprobe: modprobe: insmod /lib/modules/2.4.22-6mdk/ kernel/drivers/sound/cmpci.o.gz failed Sep 10 19:20:01 one modprobe: modprobe: insmod cmpci failed Sep 10 19:20:01 one sound: Loading sound module (cmpci) failed
[Cooker] [Bug 5509] [suspend-scripts] New: Feedback needed
http://qa.mandrakesoft.com/show_bug.cgi?id=5509 Product: suspend-scripts Component: suspend-scripts Summary: Feedback needed Product: suspend-scripts Version: 1.6-1mdk Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: suspend-scripts AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When suspend-to-disk is initiated there is a very long delay before the machine switches to console mode and starts giving feedback. There should be a progress bar informing that services are being shut down or a small window telling that the process may take a while. On resume, the X screensave needs to trigger so that the user becomes aware that the resume process i finished and the computer is ready to use. Nevertheless, I'm very happy to see swsusp working on my Dell Inspiron 8500. Thanks. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5489] [sane-backends] CanoScan LiDE 30 does not work with current sane-backends/libsane
http://qa.mandrakesoft.com/show_bug.cgi?id=5489 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|[EMAIL PROTECTED] |[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:01 --- I have reported the problem on the SANE developer mailing list. I hope someone can make a patch. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: With sane 1.0.12 the CanoScan LiDE driver is broken. It will never go beyond reporting an 'I/O' error for the scanner. After down-grading to the 1.0.11 packages from mdk 9.1 everything worked fine (I had to rpm --nodeps in order to get it to install since 1.0.11 depends on libexif.so.8 and 9.2 has libexif.so.9) also - this address has a little info from a suse mailing list about the driver problem in 1.0.12 http://lists.suse.com/archive/suse-linux-e/2003-Jun/3022.html mark
[Cooker] [Bug 5498] [kernel] RC2 Sound module problems (snd-cmipci).
http://qa.mandrakesoft.com/show_bug.cgi?id=5498 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:10 --- what is strange is that something tried to load cmpci. could you attach your /etc/modules.conf ? and also install alsamixergui aumix to see mixer settings. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting RC2 the following lines appear in /var/log/messages: Sep 10 19:20:00 one sound: Loading sound module (snd-cmipci) succeeded Sep 10 19:20:01 one kernel: cmpci: version $Revision: 6.16 $ time 18:25:55 Sep 7 2003 Sep 10 19:20:01 one modprobe: lib/modules/2.4.22-6mdk/kernel/drivers/sound/ cmpci.o.gz: Sep 10 19:20:01 one modprobe: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. Sep 10 19:20:01 one modprobe: You may find more information in syslog or the output from dmesg Sep 10 19:20:01 one modprobe: init_module: No such device Sep 10 19:20:01 one modprobe: modprobe: insmod /lib/modules/2.4.22-6mdk/ kernel/drivers/sound/cmpci.o.gz failed Sep 10 19:20:01 one modprobe: modprobe: insmod cmpci failed Sep 10 19:20:01 one sound: Loading sound module (cmpci) failed After logging in (KDE desktop) there is no sound, but when I uncheck Start aRts sounserver on KDE startup in Control Centre Sound system aRts, the sound is working again, although the error messages remain. In RC1 (and 9.1) there were no problems with the sound.
[Cooker] [Bug 5436] [kernel] gphoto 2.1.2 not working (usb problem ?)
http://qa.mandrakesoft.com/show_bug.cgi?id=5436 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:11 --- Can you boot your Cooker system with the kernel of Mandrake 9.1? If it works then, this bug is probably a duplicate of bog #5194. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: gphoto 2.1.2 is not able to get picture from my camera via usb. The camera is recognised, but transfert fail when triying to get the first picture. It's not a gphoto2 problem since i run gphoto2 2.1.2 (compiled from tarball) without any problem on my mdk 9.0 box. it seems to be a low level usb problem
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:20 --- Am Donnerstag, 11. September 2003 00:20 schrieb [tvignaud]: Hmmm. That doesn't set up the network on plug in, as far as i have understood all the usb stuff. All you might get this way is a loaded module, not an executed script. Alltough, with right config, an ifup usb0 should be enough. Maybe i just don't know usbdnet ?? ;) Steffen -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:23 --- You may be right, I did not test all possibilities. But atleast, usbnet lines should be added in the hotplug map file for Zauruses. I don't know for the yopi, but if an owner could give the specs, that would be nice. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
[Cooker] [Bug 5500] [hotplug] Please add Zaurus 5500 support
http://qa.mandrakesoft.com/show_bug.cgi?id=5500 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:30 --- Am Donnerstag, 11. September 2003 00:54 schrieb [jan.ciger]: Read the source luke ;). From top of my head (You should verify what i will say, i only describe it basically, how i have it understood): The proper way is, to put a script that returns the mentioned line(s) in /usr/lib/hotplug/ dir. The name in the line that stands normally for the module, is the name of the script, that gets executed. This script have to be placed in /etc/hotplug/usb dir. The script gets called with one argument (add or remove) and this should do the needed/wished things then on plug or unplug. Very nice thing to play with, if you have a digikam or the like (load the pictures from the cam, convert them in a webgallery or the like) BTW: In the usb.useragent script is a typo as far as i have understood it. The name of the script must not have the name of a modul what needs eventually to be loaded. In the script was written, that it must have the name. It may be fixed in the meantime, but was very confusing. Steffen -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Please add Zaurus 5500 support. It can be recognised in hotplug for use with qtopiadesktop. Just add it to hotplug map. The instructions have been sent by bluegreenone on Mandrakeclub : http://www.mandrakeclub.com/modules.php?op=modloadname=Splatt_Forumfile=viewtopictopic=8225forum=10post_id=25952 1) Add this line to the end of /etc/hotplug/usb.handmap : Code: usbdnet 0x0003 0x04dd 0x8004 0x 0x 0x02 0x00 0x00 0xff 0x01 0x00 0x (if last line in file make sure to add a linefeed at the end) 2) Add a script called /etc/hotplug/usb/usbdnet (this forum malfunctions when i try to format this using CODE like I did above.) #! /bin/bash typeset -i num num=`ifconfig | grep usb0 | wc -l` if [ $num -eq 0 ] ; then ifconfig usb0 192.168.129.1 netmask 255.255.255.255 up route add -host 192.168.129.201 usb0 fi 3) Then setup shorewall to both allow the zaurus to talk to the PC and to have it do connection sharing so the zaurus can get to the Internet. Check out the two interface example of shorewall here. This assumes that you have one regular ethernet card and then the zaurus (usb0) as the second interface. 4) Set zaurus usbd networking to IP: 192.168.129.201 Subnet mask: 255.255.255.0 Gateway: 192.168.129.1 DNS: use your own
[Cooker] [Bug 3193] [drakxtools] draktv fails on setting xawtv configuration
http://qa.mandrakesoft.com/show_bug.cgi?id=3193 [EMAIL PROTECTED] changed: What|Removed |Added Version|9.2-4mdk|9.2-9mdk --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:32 --- This 2 bugs are still valid : the command launched is : scantv -n SECAM -f france -o /root/.xawtv thus the config file is stored for root and not the user running drakconf if the device is not /dev/video0 scantv fails with error : device has no tuner, exiting the right command should be (for video1 for example, and user pascal ): scantv -n SECAM -f france -c /dev/video1 -o ~pascal/.xawtv -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: If you have a webcam usb and a TV card (as I do) and at boot the webcam is detected first as video0 then draktv will fail to configure tv channels using scantv the syslog shows the command line for scanning channels is : mar 11 20:24:22 spirit drakxtv[22540]: launched command: xvt -T 'Recherche des canaux de télévision ...' -e scantv -n SECAM -f france -o /root/.xawtv 2 problems here : 1. no device parameter is used assuming erronelously the tv card is on video0 2. the setting is done for root !! not the user calling draktv
[Cooker] [Bug 5510] [opengroupware-webui-base] New: packages depends on ngobjweb even though it's installed
http://qa.mandrakesoft.com/show_bug.cgi?id=5510 Product: opengroupware-webui-base Component: packaging Summary: packages depends on ngobjweb even though it's installed Product: opengroupware-webui-base Version: 1.0-1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: minor Priority: P2 Component: packaging AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Dependency with mod_ngobjweb,e ven though, this is installed. BTW. it also depends on theme. , which I think should be uploaded first then. NDEE -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5289] [locales-he] CONSOLE_NOT_LOCALIZED=yes has not effect
http://qa.mandrakesoft.com/show_bug.cgi?id=5289 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:40 --- The problem is that some tools see list (except xchat) http://www2.iro.umontreal.ca/~pinard/po/registry.cgi?team=he use visual ordering for display at console. for example make. The situation is now that I get reversed hebrew in terminals when i use urpmi. It's been agreed that for console hebrew will use visual layout and not logical like used in kde/gnome. I can reverse the output strings of urpmi (which is the only tools which outputs to console no?) before final, hopefully you will get this in monday/tuesday. i see no better option. BTW: are there strings which are showed on a Window and sometimes in a console (the same string is used for X and console output)? if they are, your work arround will be the best, even if i dont like it. Please also remove the usage of acon when one installs hebrew, since it's untested (and programs which support bidi will support it on their own, vim emacs, pine). This patch will make problems with the cursor mevement for example. TIA. --- [EMAIL PROTECTED] wrote: __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: (i hope this is the correct package to report...) anywany, rc1, out of the box, the string is in /etc/sysconfig/i18n and I still get a hebrew console. The problem is that I get squares and stuff instead of reversed herew, on the other hand I can always blame acon on this, since it should not be installed in whith hebrew. We like our hebrew reversed by hand. aka visual, this is the translation used by make for example (hopefully i will have time to reverse also urpmi before rc2 or final).
[Cooker] [Bug 5498] [kernel] RC2 Sound module problems (snd-cmipci).
http://qa.mandrakesoft.com/show_bug.cgi?id=5498 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:42 --- /etc/modules.conf: above snd-cmipci snd-pcm-oss probeall usb-interface usb-uhci alias sound-slot-0 snd-cmipci alias eth0 8139too probeall scsi_hostadapter usb-storage ide-scsi alias sound-slot-1 cmpci [EMAIL PROTECTED] etc]# aumix -q vol 77, 77 synth 77, 77, P pcm 77, 77, P speaker 67, 67 line 0, 0, P mic 0, 0, P cd 0, 0, P line1 0, 0, P -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When booting RC2 the following lines appear in /var/log/messages: Sep 10 19:20:00 one sound: Loading sound module (snd-cmipci) succeeded Sep 10 19:20:01 one kernel: cmpci: version $Revision: 6.16 $ time 18:25:55 Sep 7 2003 Sep 10 19:20:01 one modprobe: lib/modules/2.4.22-6mdk/kernel/drivers/sound/ cmpci.o.gz: Sep 10 19:20:01 one modprobe: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. Sep 10 19:20:01 one modprobe: You may find more information in syslog or the output from dmesg Sep 10 19:20:01 one modprobe: init_module: No such device Sep 10 19:20:01 one modprobe: modprobe: insmod /lib/modules/2.4.22-6mdk/ kernel/drivers/sound/cmpci.o.gz failed Sep 10 19:20:01 one modprobe: modprobe: insmod cmpci failed Sep 10 19:20:01 one sound: Loading sound module (cmpci) failed After logging in (KDE desktop) there is no sound, but when I uncheck Start aRts sounserver on KDE startup in Control Centre Sound system aRts, the sound is working again, although the error messages remain. In RC1 (and 9.1) there were no problems with the sound.
[Cooker] [Bug 5326] [kernel] kernel fails to load usb
http://qa.mandrakesoft.com/show_bug.cgi?id=5326 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 01:52 --- In mdk9.2rc2 dmesg returns this (USB part only) Freeing unused kernel memory: 152k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 18:27:09 Sep 7 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Adding Swap: 506008k swap-space (priority -1) hub.c: new USB device 00:11.2-1, assigned address 2 usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=2 (error=-110) hub.c: new USB device 00:11.2-1, assigned address 3 usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=3 (error=-110) Should I try with acpi, are you going to fix this? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: On my acer aspire 1700+ with MDK 9.2rc1 the usb ports don´t work. I had this problem with MDK 9.1 too.lsusb returns a nice 0x0 even with my webcam and speedtouch modem plugged in. Adding pci usb ports has the same result. I know these ports are from VIA,and they work perfectly with suse live cd 8.2 (That uses kernel 2.4.20). I think it could be a bus system problem, as in MDK 9.1 sound did't work even if it installed and loaded the drivers, and this works with the suse live cd too, I´m installing KDE and will report on sound as soon as I can. Please try and fix this, without usb I loose my modem, mywebcam, my printer and my scanner. I can send more info on the chips, just let me know how to get it (Cat something in proc, run a script,whatever)
[Cooker] [Bug 4334] [drakxtools] Drakxservices : Please order them by categories + some other enhancements
http://qa.mandrakesoft.com/show_bug.cgi?id=4334 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] Status|UNCONFIRMED |RESOLVED Resolution||LATER --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 02:00 --- drakxservices can be enhanced. but for now, we've to postpone it after mdk9.2 david, please add it to your todo list -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When installing, services/demons are nicely organised as categories : network, printing, etc... That would be nice if it was the same for the drakxservices in the MCC, with categories and arrows. Moreover, the layout could be like rpmdrake : instead of an information button for each entry (which does not look very nice), why not creating a window in the right that would give the necessary information. Finally, you could add in information the importance of the services and some warnings (portmapper : do not uncheck if you use sharing, SMB : you can uncheck if you don't use Windows machines in your network, etc...) WDYT ?
[Cooker] [Bug 4299] [Installation] Improve package installation progress dialog
http://qa.mandrakesoft.com/show_bug.cgi?id=4299 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] Status|NEW |RESOLVED Resolution||LATER --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 02:00 --- nice idea, but we've to postponed it -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I think this dialog could use some improvement. Mainly I am thinking about reordering the information. On detailed version they should be in this order: Installing package: name of package Description of package being installed Progresbar for package being installed Overall progress: current package/all packages Progresbar for overall installation Time remaining: time remaining In no details version only the second part for overall progress should be displayed and above it there should be Mandrake images like now. When in details mode where there are no add images there is some large empty area at the top of dialog and that should also be fixed/removed.
[Cooker] [Bug 5510] [opengroupware-webui-base] packages depends on ngobjweb even though it's installed
http://qa.mandrakesoft.com/show_bug.cgi?id=5510 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 02:10 --- On 09/10/2003 07:35:21 PM, [ak703] wrote: Huh? Can you explain further... I don't understand you. If urpmi is not working properly, send me the output. Please note that the way to install opengroupware is: # urpmi OpenGroupware.org If THAT doesn't work, I'd like to know. Thanks, Austin -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Dependency with mod_ngobjweb,e ven though, this is installed. BTW. it also depends on theme. , which I think should be uploaded first then. NDEE
Re: [Cooker] kernel + firewire/1394
On Wed, 2003-09-10 at 16:34, Thomas Backlund wrote: Byron Poland kirjoitti viestissään (lähetysaika Keskiviikko 10. Syyskuuta 2003 23:07): Ignore the last e-mail... its a repeat, copied over my evolution folder, to a fresh install and it sent it on first check.. oh well. Would you mind trying: http://www.iki.fi/tmb/Cooker/kernel-tmb-2.4.22.7.tmb.1mdk-1-1mdk.i586.rpm It's running ieee1394 rev 1051 and let me know if it works... If it does not, would you mind recompiling the kernel with a patch I'll send you (if the above kernel still does not work) I tried the kernel on one machine, and still got a disabilitating amount of scsi abort commands. I've compiled the enterprise version for my other machine to try it on there, and will do that tomorrow. you can go ahead and send me the patch, and also a brief discription of the how to patch the kernel after rpm -i the src.rpm.thanks
[Cooker] [Bug 5145] [mozilla] Flash and Java plugins does not work/run as normal (in mdk9.2rc).
http://qa.mandrakesoft.com/show_bug.cgi?id=5145 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 02:21 --- did you install libstdc++2.10 yet, mikkel? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I can't seem to get Java applet support and the macronedia flashplayer installed so that mozilla/galeon can use them. In mdk 9.1 this all worked -no problems. In Mozilla-1.3 'rpm -ivh j2sdkXYZ' would install libjavaplugin_oji.so properly and applet support was ensured. Same with the flash-player installer script, I just told it that mozilla was located at /usr/lib/mozilla-1.3 (now -1.4 ofcourse) and everything worked. I've tried moving the flash-files and linking (ln -s) the libjavaplugin_oji.so to all sorts of places (/usr/lib/mozilla/plugins, /usr/lib/mozilla-1.4, /usr/lib/mozilla-1.4/plugins, ~/.mozilla/plugins ) but nothing works. I have MPlayer-plugin installed at ~/.mozilla/plugins which works fine. The best I can do regarding java/flash is to just make the areas where they where supposed to be seen in the browser disappear.
Re: [Cooker] RapidSVN in the cooker crashes
Unfortunately I have the newest versions. So that was not the issue. If you build a new version of RapidSVN, I can test it later. [EMAIL PROTECTED] lamikr]# rpm -qa | grep subver subversion-tools-0.29.0-2mdk subversion-client-dav-0.29.0-2mdk subversion-repos-0.29.0-2mdk subversion-python-0.29.0-2mdk libsubversion0-0.29.0-2mdk subversion-client-local-0.29.0-2mdk subversion-client-common-0.29.0-2mdk [EMAIL PROTECTED] lamikr]# rpm -qa | grep rapid rapidsvn-0.3.0-1mdk librapidsvn0-0.3.0-1mdk [EMAIL PROTECTED] lamikr]# Mika Ben Reser wrote: On Wed, Sep 10, 2003 at 09:37:59AM +0300, lamikr_mdk wrote: Does RapidSVN rapidsvn-0.3.0-1mdk from the cooker work for somebody? If I add repository it will appear in the tree under workbench. But if I then click a just added repository rapidsvn will crash to segfault. Make sure you have the appropriate client for subversion installed. I.E. for DAV(http) subversion-client-dav, local subversion-client-local... Unfortunately, the client will crash if the right one isn't available. I don't really want to require everyone to install all of them, just to keep the client from crashing. So I consider this an upstream bug, not a bug in packaging. If you do have the right ones installed I'll have a new package up momentarrily that is patched to work with subversion 0.29 which should fix the issue for sure (as long as you have the right client packages installed).
[Cooker] [Bug 4324] [drakxtools] After Install The Backup list package not work
http://qa.mandrakesoft.com/show_bug.cgi?id=4324 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 02:40 --- On Wed, 10 Sep 2003, [tvignaud] wrote: Sounds more like the tail end of the install to me. When you have the option of saving the list of installed packages to duplicate the install. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: At the en of the install in normal mode the advenced app to save the lis of installed package not work, when i try to backup the lis on floppy he never reconize the floppy (try with 3 news floppy)
[Cooker] [Bug 5511] [rpmdrake] New: Menu items disappearing after installing packages with rpmdrake
http://qa.mandrakesoft.com/show_bug.cgi?id=5511 Product: rpmdrake Component: packaging Summary: Menu items disappearing after installing packages with rpmdrake Product: rpmdrake Version: 2.1-35mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: major Priority: P2 Component: packaging AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Numerous menu items will disappear after installing various packages with rpmdrake, particularly kde items. In one instance, clicking on the Home icon would not bring up konqueror after a package install and kde control center disappeared. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 5512] [Installation] New: Package selection problemm.
http://qa.mandrakesoft.com/show_bug.cgi?id=5512 Product: Installation Component: Installation Summary: Package selection problemm. Product: Installation Version: 1.833 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: Installation AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I've installed Mandrake Linux 9.2 RC2 and when I wanna select the individual packages some of them (this happened also with RC1) where saying that Cannot select or unselect package!. So, basicly there where packages I couldn't select to install. I hope that this will be fixed in the final release. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 4970] [kdebase] RC1, konsole did not install as part of KDE install
http://qa.mandrakesoft.com/show_bug.cgi?id=4970 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:07 --- This is essentially the same as 5179. The problem is that kdebase has been split. So there are issues with upgrading and fresh installs with getting it. I'm combining the bugs all together rather than having half a dozen separate ones. I chose 5179 because it was the one with the most activity on it and seemed to be assigned to someone at Mandrakesoft. *** This bug has been marked as a duplicate of 5179 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Clean install of RC1, KDE installed, but did not install konsole. Manually had to install it through urpmi.
[Cooker] [Bug 5179] [Installation] When selecting konsole to be installed from the installer...
http://qa.mandrakesoft.com/show_bug.cgi?id=5179 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:07 --- *** Bug 4970 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: It is not added to the terminals menu. Why isn't this installed by default, esp on a KDE install?!?
[Cooker] [Bug 5513] [kdebase] New: Mdk9.2 - Default icons missing in the dasboard
http://qa.mandrakesoft.com/show_bug.cgi?id=5513 Product: kdebase Component: kdebase Summary: Mdk9.2 - Default icons missing in the dasboard Product: kdebase Version: 3.1.3-49mdk Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: kdebase AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] After install, the KDE bar contains almost nothing : just the K, the desktop and the home buttons. Where are the other ones ? Shouldn't we have at least Konqueror, the help button, a text editor and Kmail ? KDE config panel was also there. As it should not be use often, it could be suppessed, but let at least a mailer and a browser ! Advanced users can change them, not a beginner ! -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 4992] [kdebase] No konsole in KDE in LM9.2rc1
http://qa.mandrakesoft.com/show_bug.cgi?id=4992 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:08 --- This is essentially the same as 5179. The problem is that kdebase has been split. So there are issues with upgrading and fresh installs with getting it. I'm combining the bugs all together rather than having half a dozen separate ones. I chose 5179 because it was the one with the most activity on it and seemed to be assigned to someone at Mandrakesoft. *** This bug has been marked as a duplicate of 5179 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: This problem was not present in LM9.2beta2. The KDE konsole has just vanished. whereis konsole or which konsole does not list any such program. Its nowhere on the system. And naturally, Kmenu-Terminals does not list konsole either. rpm -qa | grep kdebase shows this: kdebase-3.1.3-36mdk kdebase-servicemenu-1.0-10mdk kdebase-kdm-config-file-3.1.3-36mdk libkdebase4-3.1.3-36mdk kdebase-common-3.1.3-36mdk I am sure that kde-3.1.3 compiled from sources does not have this problem. Has the konsole binary been moved to some other rpm ?
[Cooker] [Bug 5179] [Installation] When selecting konsole to be installed from the installer...
http://qa.mandrakesoft.com/show_bug.cgi?id=5179 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:08 --- *** Bug 4992 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: It is not added to the terminals menu. Why isn't this installed by default, esp on a KDE install?!?
[Cooker] [Bug 5306] [kdebase-konsole] Upgrading from 9.1 to 9.2RC1: programs missed
http://qa.mandrakesoft.com/show_bug.cgi?id=5306 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:09 --- This is essentially the same as 5179. The problem is that kdebase has been split. So there are issues with upgrading and fresh installs with getting it. I'm combining the bugs all together rather than having half a dozen separate ones. I chose 5179 because it was the one with the most activity on it and seemed to be assigned to someone at Mandrakesoft. *** This bug has been marked as a duplicate of 5179 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In 9.2RC1, some packages have been split up: for example konsole has been moved from kdebase to kdebase-konsole and others. When upgrading from 9.1 to 9.2Rc1, kdebase is upgraded, but konsole is not installed, even though it had been (as part of kdebase) under 9.1. It had to be installed from rpmdrake after upgrade - which worked fine. If a package is split between versions, then in an upgrade, all of the packages which comprised the original packages should be installed but the upgrade, under the principle that (to whatever level is reasonable) things that worked before an upgrade will work after the upgrade.
[Cooker] [Bug 5179] [Installation] When selecting konsole to be installed from the installer...
http://qa.mandrakesoft.com/show_bug.cgi?id=5179 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] ||a --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:09 --- *** Bug 5306 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: It is not added to the terminals menu. Why isn't this installed by default, esp on a KDE install?!?
[Cooker] [Bug 5328] [kdebase] where is the kde's konsole in 9.2rc1
http://qa.mandrakesoft.com/show_bug.cgi?id=5328 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 03:10 --- This is essentially the same as 5179. The problem is that kdebase has been split. So there are issues with upgrading and fresh installs with getting it. I'm combining the bugs all together rather than having half a dozen separate ones. I chose 5179 because it was the one with the most activity on it and seemed to be assigned to someone at Mandrakesoft. *** This bug has been marked as a duplicate of 5179 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hi, Im wondering where is the KDE's konsole in 9.2rc1. This application should be installed by default ... no? I'm always installing all the big packages in the installer. thank you, Louis-Charles Dumais
