Bug#390923: mpt-status: not fixed yet?

[Rudy Gevaert <[EMAIL PROTECTED]>]

Package: mpt-status
Version: 1.2.0-4
Followup-For: Bug #390923

Hi,

I recompiled the latest version for etch, but can't see anything relevant yet:
spring:~# mpt-status -p
Checking for SCSI ID:0
Checking for SCSI ID:1
Checking for SCSI ID:2
Checking for SCSI ID:3
Checking for SCSI ID:4
Checking for SCSI ID:5
Checking for SCSI ID:6
Checking for SCSI ID:7
Checking for SCSI ID:8
Checking for SCSI ID:9
Checking for SCSI ID:10
Checking for SCSI ID:11
Checking for SCSI ID:12
Checking for SCSI ID:13
Checking for SCSI ID:14
Checking for SCSI ID:15
Nothing found, contact the author

02:03.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064 PCI-X 
Fusion-MPT SAS (rev 02)
Subsystem: LSI Logic / Symbios Logic Unknown device 3060
Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 20
I/O ports at a800 [disabled] [size=256]
Memory at fc4fc000 (64-bit, non-prefetchable) [size=16K]
Memory at fc4e (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fc20 [disabled] [size=2M]
Capabilities: [50] Power Management version 2
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
Capabilities: [68] PCI-X non-bridge device
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1

How can I further debug this? (I'm using udev, but I don't know if that is 
relevant).

Thanks in advance.

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.21.1-ugent
Locale: LANG=, LC_CTYPE= (charmap=ANSI_X3.4-1968)

Versions of packages mpt-status depends on:
ii  daemon   0.6.3-1 turns other processes into daemons
ii  libc62.3.6.ds1-13GNU C Library: Shared libraries
ii  lsb-base 3.1-23.1Linux Standard Base 3.1 init scrip
ii  mailx1:8.1.2-0.20050715cvs-1 A simple mail user agent

mpt-status recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420557: RFA: cvsdelta

[Aaron Maxwell]

Hi Eric,

I'm interested in taking over the cvsdelta package.  Are you still looking for 
someone to adopt?

My motivation is that I intend to apply for official Debian developer status, 
and am looking for a package to adopt as a way to get started on that path.  

Just so you have some info about me, here's a resume:
http://redsymbol.net/resume.html
It is very slightly out of date:  I currently work at SnapLogic 
(http://snaplogic.org), where I  write opensource software in (mostly) 
Python.  I don't use CVS much now, but have used it enough in the past.  As 
far as Ruby, I am certainly not fluent, but believe I know that lang well 
enough that I can maintain this package.

-- 
Aaron Maxwell
http://redsymbol.net

Business Owners and Self-Employed:  You're NOT Alone!
The Business Butler - http://businessbutler.us


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#345839: [radeon] 2nd head of dualhead setup got "messed up"

[VALETTE Eric RD-MAPS-REN]

Paul Donohue wrote:
> The problem is gone for me now.  I'm currently using Xorg in Etch, and two 
> heads works fine with the radeon driver.  I honestly can't remember when the 
> problem went away.
>   
The problem is gone for me too. I'm using lenny. Last version of ATI
driver changed the MetaModes head ordering (or the order of detection in
the driver) than again redered it unusable but once I figured it out
everything is back to normal.

-- eric



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429784: libasound2: No more sound since last upgrade

[Manuel Silvoso]

Package: libasound2
Version: 1.0.14a-1
Severity: grave
Justification: renders package unusable


Hi,

Since last upgrade I have no sound anymore.
Here is the output of lsmod | grep snd :

snd_intel8x0m  16716  0
snd_intel8x0   32060  0
snd_ac97_codec 92356  2 snd_intel8x0m,snd_intel8x0
ac97_bus2272  1 snd_ac97_codec
snd_pcm_oss39168  0
snd_mixer_oss  15328  1 snd_pcm_oss
snd_pcm71940  4
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer  20868  1 snd_pcm
snd48132  7
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore   7424  1 snd
snd_page_alloc  9512  3 snd_intel8x0m,snd_intel8x0,snd_pcm

My card is correctly detected as Intel Corporation 82801DB/DBL/DBM
but at the end of the alsaconf procedure I get:
 
Running update-modules...
Loading driver...
Usage: /etc/init.d/alsa
{unload|reload|force-unload|force-reload|suspend|resume}
Setting default volumes...
amixer: Mixer attach default error: No such device
Saving the mixer setup used for this in /var/lib/alsa/asound.state.
/usr/sbin/alsactl: save_state:1253: No soundcards found...

And no driver is loaded

Best regards,

Manuel 

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages libasound2 depends on:
ii  libc6 2.5-11 GNU C Library: Shared libraries

libasound2 recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429783: xsane: Invalid memory reference

[Aldo Maggi]

Package: xsane
Version: 0.99+0.991-2
Severity: important
File: /usr/bin/xsane

*** Please describe what you were doing when the application crashed ***

(no debugging symbols found)
Using host libthread_db library "/lib/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1219839504 (LWP 6331)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
0xb7f33aee in __waitpid_nocancel () from /lib/libpthread.so.0
#0  0xb7f33aee in __waitpid_nocancel () from /lib/libpthread.so.0
#1  0xb7f5aa7d in viaticum_init () from /usr/lib/debreaper/libviaticum.so
#2  
#3  0x080aafbf in ?? ()
#4  0x3bb3f259 in ?? ()
#5  0xbfb50a6a in ?? ()
#6  0x0001 in ?? ()
#7  0xbfb61868 in ?? ()
#8  0x in ?? ()

Thread 1 (Thread -1219839504 (LWP 6331)):
#0  0xb7f33aee in __waitpid_nocancel () from /lib/libpthread.so.0
No symbol table info available.
#1  0xb7f5aa7d in viaticum_init () from /usr/lib/debreaper/libviaticum.so
No symbol table info available.
#2  
No symbol table info available.
#3  0x080aafbf in ?? ()
No symbol table info available.
#4  0x3bb3f259 in ?? ()
No symbol table info available.
#5  0xbfb50a6a in ?? ()
No symbol table info available.
#6  0x0001 in ?? ()
No symbol table info available.
#7  0xbfb61868 in ?? ()
No symbol table info available.
#8  0x in ?? ()
No symbol table info available.
#0  0xb7f33aee in __wai

Bug#421734: libvte9: bug not fixed in 0.16.5

[Loïc Minier]

reopen 421734
found 421734 1:0.16.5-1
stop

-- 
Loïc Minier

Bug#385449: #385449 smbfs: smbmount is too verbose

[Markus . Grunwald]

Hello Noèl,

> we cannot reproduce your problems with lot of output when mounting smbfs
> (see danns reply http://bugs.debian.org/385449 ).
> 
> Could this because of your own built kernel?
> Can you still reproduce this problem?

Sorry, after a while I forgot this bug 
No, I can't reproduce this bug any more. Seems that you are right and it 
is gone with a new kernel.

Thank you !

Markus Grunwald

Bug#429785: ITP: libwebservices-cia-perl -- get information from the CIA World Factbook via Perl

[Zak B. Elep]

Package: wnpp
Severity: wishlist
Owner: "Zak B. Elep" <[EMAIL PROTECTED]>

* Package name: libwebservices-cia-perl
  Version : 1.2
  Upstream Author : Ian Malpass <[EMAIL PROTECTED]>
* URL : http://search.cpan.org/dist/WebService-CIA/
* License : GPL/Artistic
  Programming Lang: Perl
  Description : get information from the CIA World Factbook via Perl

This Perl module gets information from the CIA World Factbook.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20-16-generic (SMP w/2 CPU cores)
Locale: LANG=en_PH.UTF-8, LC_CTYPE=en_PH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429783: xsane: Invalid memory reference

[Julien BLACHE]

Aldo Maggi <[EMAIL PROTECTED]> wrote:

Hi,

> Thread 1 (Thread -1219839504 (LWP 6331)):
> #0  0xb7f33aee in __waitpid_nocancel () from /lib/libpthread.so.0
> No symbol table info available.
> #1  0xb7f5aa7d in viaticum_init () from /usr/lib/debreaper/libviaticum.so
> No symbol table info available.
> #2  
> No symbol table info available.
> #3  0x080aafbf in ?? ()
> No symbol table info available.
> #4  0x3bb3f259 in ?? ()
> No symbol table info available.
> #5  0xbfb50a6a in ?? ()
> No symbol table info available.
> #6  0x0001 in ?? ()
> No symbol table info available.
> #7  0xbfb61868 in ?? ()
> No symbol table info available.
> #8  0x in ?? ()
> No symbol table info available.
> #0  0xb7f33aee in __waitpid_nocancel () from /lib/libpthread.so.0

This backtrace is unusable, please rebuild xsane with debug symbols
and get a new backtrace from that.

Thanks,

JB.

-- 
 Julien BLACHE - Debian & GNU/Linux Developer - <[EMAIL PROTECTED]> 
 
 Public key available on  - KeyID: F5D6 5169 
 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#374986: xserver-xorg-video-ati: [2.6.17/radeon] Xserver and console dead, rt_sigaction looping, not killable

[Robert Millan]

On Tue, Jun 19, 2007 at 11:15:56PM +0200, Brice Goglin wrote:
> 
> Hi,
> 
> About a year ago, you reported (or replied to) a bug to the Debian BTS
> regarding the X server and console dying on a Radeon X800GTO board. Did
> you reproduce this problem recently? With Xorg/Etch? With latest
> xserver-xorg-core and drivers? If not, I will close this bug in the next
> weeks.

My card is an X300, but it seems to hit the same bug.  I haven't tried lately,
but will try again tomorrow after my exams.

Thank you

-- 
Robert Millan

My spam trap is [EMAIL PROTECTED]  Note: this address is only intended
for spam harvesters.  Writing to it will get you added to my black list.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#427772: [patch] detach from controlling tty in non-debug mode

[Florian Lohoff]

Hi,
bird needs something like this because in case it daemonizes it still
keeps the fds open of the controlling tty which is bad in case you'd
like to log out which then will hang.

I already opened a Debian Bug - See:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=427772

Flo

diff -Nur bird-1.0.11/sysdep/unix/main.c bird-1.0.11.flo/sysdep/unix/main.c
--- bird-1.0.11/sysdep/unix/main.c  2007-06-20 09:13:21.0 +0200
+++ bird-1.0.11.flo/sysdep/unix/main.c  2007-06-20 09:21:00.0 +0200
@@ -434,7 +434,18 @@
die("fork: %m");
   if (pid)
return 0;
+
   setsid();
+
+  /* Close all FDs and thus detach from controlling tty */
+  for (i=getdtablesize();i>=0;--i)
+close(i);
+
+  /* create harmless stdin/out/err */
+  i=open("/dev/null",O_RDWR);
+  dup(i);
+  dup(i);
+
 }
 
   signal_init();
-- 
Florian Lohoff  [EMAIL PROTECTED] +49-171-2280134
Those who would give up a little freedom to get a little 
  security shall soon have neither - Benjamin Franklin


signature.asc
Description: Digital signature

Bug#428087: Diagnosis of the bug

[Matthew Falls]

Here is the problem:

~$ls -al /usr/share/java/swt*
-rw-r--r-- 1 root root 1217060 2007-06-03 07:05 
/usr/share/java/swt-gtk-3.2.1.jar
lrwxrwxrwx 1 root root  25 2007-02-27 23:17 /usr/share/java/swt.jar -> 
/etc/alternatives/swt.jar

~$ls -al /etc/alternatives/swt.jar 
lrwxrwxrwx 1 root root 33 2007-06-06 05:38 /etc/alternatives/swt.jar -> 
/usr/share/java/swt-gtk-3.2.1.jar

~$ls -al /usr/lib/java/*
lrwxrwxrwx 1 root root 64 2007-06-14 09:50 /usr/lib/java/swt3.2-gtk.jar -> 
../eclipse/plugins/org.eclipse.swt.gtk.linux.x86_3.2.2.v3236.jar
lrwxrwxrwx 1 root root 14 2007-06-14 09:50 /usr/lib/java/swt-gtk.jar -> 
swt3.2-gtk.jar
lrwxrwxrwx 1 root root 14 2007-06-14 09:50 /usr/lib/java/swt.jar -> 
swt3.2-gtk.jar

~$ls -al /usr/lib/jni/libswt-gtk-*
-rw-r--r-- 1 root root 234348 2007-06-04 08:11 /usr/lib/jni/libswt-gtk-3236.so


The ones in /usr/lib/java come from libswt3.2-gtk-java, while the ones from 
/usr/share/java come from libswt-gtk-3.2-java.

But both of these are backed by libswt3.2-gtk-jni. So if one is rebuilt, backed 
by a new version of libswt3.2-gtk-jni, the other won't know that its native 
library in the -jni package has been replaced and won't be able to find the 
peers.

The short-term solution is to fiddle with your /usr/bin/azureus script so that 
is uses either /usr/lib/java/swt.jar or /usr/share/java/swt.jar, whichever is 
working on your system. The long-term fix is to either merge both swt packages 
into one, or to split the -jni package into two, one for each of the java swt 
libs.

Maybe this has happened, and one has been obsoleted. In that case, the 
definitive one should be made to conflict with the other on the next update & 
the loser will disappear from everyone's system.

--MFalls


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429344: severity 429344 wishlist

[Pierre Chifflier]

severity 429344 wishlist
tags 429344 +upstream
thanks

GLPI does actually not use PHPMailer, it only includes a patched copy
(so the bug is not RC). As explained in the previous mail, a change is
in progress in the upstream release.

Regards,
Pierre


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#424407: sympa: New build-depends

[Olivier Salaün - CRU]

Stefan Hornburg (Racke) a écrit :

Micah Anderson wrote:

Package: sympa
Severity: minor

You may have noticed that when building the new sympa, there are some 
new perl modules that it depends on.
These perl modules were not in Debian, so I packaged them and they 
recently passed NEW. You may wish to adjust your build dependencies 
on sympa to include the following:


libcrypt-openssl-x509-perl


Where is this module used in sympa ?
We've just realized, thanks to you, that is was not used. It has been 
introduced with an X509 related patch but the patch code still uses 
mod_ssl. See 
http://sourcesup.cru.fr/cgi/viewvc.cgi/trunk/check_perl_modules.pl?root=sympa&r1=3531&r2=3754


We'll remove that dependency from both SVN branches of Sympa.

Thanks for reporting this.

Bug#427772: [patch] detach from controlling tty in non-debug mode

[Martin Mares]

Hi!

> bird needs something like this because in case it daemonizes it still
> keeps the fds open of the controlling tty which is bad in case you'd
> like to log out which then will hang.

This is definitely worth fixing, but I think that closing all possible
fd's is an overkill, especially as getdtablesize() can return an arbitrarily
high number if the ulimit on the number of fd's is unset.

Here is the patch I applied.

diff -u -p -r1.56 main.c
--- sysdep/unix/main.c  6 Jun 2004 17:05:25 -   1.56
+++ sysdep/unix/main.c  20 Jun 2007 07:32:04 -
@@ -435,6 +435,11 @@ main(int argc, char **argv)
   if (pid)
return 0;
   setsid();
+  close(0);
+  if (open("/dev/null", O_RDWR) < 0)
+   die("Cannot open /dev/null: %m");
+  dup2(0, 1);
+  dup2(0, 2);
 }
 
   signal_init();

Thanks for your bug report
-- 
Martin `MJ' Mares  <[EMAIL PROTECTED]>   
http://mj.ucw.cz/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
A: No.   Q: Should I include quotations after my reply?


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#427963: libgphoto2-2: additional information for the udev/libgphoto horror

[Norbert Preining]

Package: libgphoto2-2
Followup-For: Bug #427963

Hi all!

I tracked a bit the problems with the libgphoto2-2 and udev problems.
There seem to be several bugs:

1) The check-ptp-camera uses $PHYSDEVPATH instead of $DEVPATH, so the
   program always returns 1 and the rules for PTP cameras are never
   executed. This is a pain.

2) (not sure about this) the libgphoto2.rules uses
   ATTRS{idVendor}
   etc, but AFAIS it should be
   ATTR{idVendor}
   etc.

2) Even worse, but I wasn't able to fix this even with the above fix
   applied, is the problem with the /proc/bus/usb/*/* permissions.
   Interestingly udev creates devices for my camera WITH the
   right permissions, namely 
  /dev/1-3
   (yup, strange where it is coming from). But of course gphoto2 does
   not check for this device but for /proc/bus/usb/NNN/NNN and this file
   has wrong permissions.

So please maintainer, could you at least suggest a fix to this problem,
or even better upload fixed versions.

Thanks

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.22-rc4 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages libgphoto2-2 depends on:
ii  adduser   3.103  Add and remove users and groups
ii  libc6 2.5-11 GNU C Library: Shared libraries
ii  libexif12 0.6.15-1   library to parse EXIF files
ii  libgphoto2-port0  2.3.1-5gphoto2 digital camera port librar
ii  libjpeg62 6b-13  The Independent JPEG Group's JPEG 
ii  libltdl3  1.5.22-4   A system independent dlopen wrappe

Versions of packages libgphoto2-2 recommends:
ii  udev  0.105-4/dev/ and hotplug management daemo

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#427045:

[Waqqas Dadabhoy]

I was having a similar problem, 2.6.21-1-686 hangs during boot
'waiting for root file system'. I am using reiserfs, and 2.6.18-4-686
works fine. I read that you asked for a log, can you tell me what log
is needed and where I can find it?


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429786: lastfm: segfaults on exit

[Wouter Koolen-Wijkstra]

Package: lastfm
Severity: normal


Sometimes, but not always, lastfm segfaults on exit. I close lastfm, while 
still playing music, by choosing 
the "Exit" menu item from the systray icon. I am not sure this matters much. 
This is the backtrace:

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1257243760 (LWP 12899)]
0xb6bfc66c in AlsaAudio::pumpThreadData () from 
/usr/lib/lastfm/services/libplayback_alsaaudio.so
(gdb) bt
#0  0xb6bfc66c in AlsaAudio::pumpThreadData () from 
/usr/lib/lastfm/services/libplayback_alsaaudio.so
#1  0xb6bfc8ac in AlsaAudio::run () from 
/usr/lib/lastfm/services/libplayback_alsaaudio.so
#2  0xb6bfc95d in AlsaAudio::alsa_loop () from 
/usr/lib/lastfm/services/libplayback_alsaaudio.so
#3  0xb767c31b in start_thread () from /lib/i686/cmov/libpthread.so.0
#4  0xb74e68ee in clone () from /lib/i686/cmov/libc.so.6

I also receive these message on the console; the last one may be related:

QLayout: Attempting to add QLayout "" to QStackedWidget "", which already has a 
layout
Object::connect: No such signal SidebarTree::currentChanged(QModelIndex)
Object::connect:  (sender name:   'treeWidget')

I also once observed the following, possibly related, corruption detection 
message from glib:

QLayout: Attempting to add QLayout "" to QStackedWidget "", which already has a 
layout
Object::connect: No such signal SidebarTree::currentChanged(QModelIndex)
Object::connect:  (sender name:   'treeWidget')
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
big_values too large! 441
big_values too large! 477
big_values too large! 413
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
bitstream problem: resyncing...
QMutex::lock: mutex lock failure:
*** glibc detected *** lastfm: corrupted double-linked list: 0x0825f208 ***
=== Backtrace: =
/lib/i686/cmov/libc.so.6[0xb743d246]
/lib/i686/cmov/libc.so.6[0xb743ec2f]
/lib/i686/cmov/libc.so.6(cfree+0x90)[0xb7442530]
/usr/lib/libstdc++.so.6(_ZdlPv+0x21)[0xb7602c01]
/usr/lib/libstdc++.so.6(_ZdaPv+0x1d)[0xb7602c5d]
/usr/lib/libQtCore.so.4(_ZN9QHashData14destroyAndFreeEv+0x29)[0xb769dfb9]
/usr/lib/libQtCore.so.4[0xb77439eb]
/usr/lib/libQtCore.so.4[0xb7742767]
/lib/i686/cmov/libc.so.6(exit+0xe9)[0xb7403949]
/lib/i686/cmov/libc.so.6(__libc_start_main+0xe4)[0xb73ecec4]
lastfm(_ZN9QTreeView8scrollToERK11QModelIndexN17QAbstractItemView10ScrollHintE+0x3d)[0x805a7f1]
=== Memory map: 
08048000-080e7000 r-xp  03:01 406244 /usr/bin/lastfm
080e7000-080e9000 rw-p 0009e000 03:01 406244 /usr/bin/lastfm
080e9000-086f4000 rw-p 080e9000 00:00 0  [heap]
b48e-b48e1000 ---p b48e 00:00 0
b48e1000-b50e1000 rw-p b48e1000 00:00 0
b50e1000-b5101000 rw-s  00:07 12998  /SYSV0056a4d6 (deleted)
b5101000-b5111000 rw-s  00:0c 5029   /dev/snd/pcmC0D0p
b590-b5923000 rw-p b590 00:00 0
b5923000-b5a0 ---p b5923000 00:00 0
b5a2b000-b5a3a000 r-xp  03:01 26003  /lib/i686/cmov/libresolv-2.5.so
b5a3a000-b5a3c000 rw-p f000 03:01 26003  /lib/i686/cmov/libresolv-2.5.so
b5a3c000-b5a3e000 rw-p b5a3c000 00:00 0
b5a3e000-b5a3f000 ---p b5a3e000 00:00 0
b5a3f000-b623f000 rw-p b5a3f000 00:00 0
b623f000-b6248000 r-xp  03:01 26013  
/lib/i686/cmov/libnss_files-2.5.so
b6248000-b624a000 rw-p 8000 03:01 26013  
/lib/i686/cmov/libnss_files-2.5.so
b624a000-b6252000 r-xp  03:01 26010  
/lib/i686/cmov/libnss_nis-2.5.so
b6252000-b6254000 rw-p 7000 03:01 26010  
/lib/i686/cmov/libnss_nis-2.5.so
b6254000-b6267000 r-xp  03:01 24372  /lib/i686/cmov/libnsl-2.5.so
b6267000-b6269000 rw-p 00012000 03:01 24372  /lib/i686/cmov/libnsl-2.5.so
b6269000-b626b000 rw-p b6269000 00:00 0
b626b000-b6272000 r-xp  03:01 26000  
/lib/i686/cmov/libnss_compat-2.5.so
b6272000-b6274000 rw-p 6000 03:01 26000  
/lib/i686/cmov/libnss_compat-2.5.so
b6287000-b6288000 ---p b6287000 00:00 0
b6288000-b6a88000 rw-p b6288000 00:00 0
b6a88000-b6a9 r-xp  03:01 406278 
/usr/lib/lastfm/extensions/libextension_userinfo.so
b6a9-b6a91000 rw-p 7000 03:01 406278 
/usr/lib/lastfm/extensions/libextension_userinfo.so
b6a91000-b6abc000 r-xp  03:01 406276 
/usr/lib/lastfm/extensions/libextension_sidebar.so
b6abc000-b6abd000 rw-p 0002a000 03:01 406276 
/usr/lib/lastfm/extensions/libextension_sidebar.so
b6abd000-b6adb000 r-xp  03:01 406279 
/usr/lib/lastfm/extensions/libextension_metadata.so
b6adb000-b6adc000 rw-p 0001e000 03:01 406279 
/usr/lib/lastfm/extensions/libextension_metadata.so
b6adc000-b6b9b000 r-xp  03:01 42112  /usr/lib/libasound.so.2.0.0
b6b9b000-b6ba rw-p 000be0

Bug#429788: update-exim4.conf does not accept more complicated values

[Norbert Preining]

Package: exim4
Version: 4.67-3
Severity: important


Hi all,

I have the following entry in my update-exim4.conf:
dc_smarthost='${lookup{*}lsearch{/etc/smarthost}{$value:}{}}our.local.smtp.server'
because I want to dynamically switch smarthosts, and fall back to our
server if necessary.

This worked till the latest upload when it suddenly broke,
update-exim4.conf now gives:

/usr/sbin/update-exim4.conf: non-ascii value 
${lookup{*}lsearch{/etc/smarthost}{$value:}{}}our.local.smtp.server read from 
/etc/exim4/update-exim4.conf.conf, sanitizing to 
__lookup___lsearch_/etc/smarthost___value:our.local.smtp.server


Putting the original line one-to-one into
/var/lib/exim4/config.autogenerated did work, mails were delivered.

The problem is in the check_ascii_pipe function in update-exim4.conf,
which only checks for 
[^-0-9a-zA-Z\/[EMAIL PROTECTED]:; ]
but it should include also
\${}\*

Could you please explain what is the rational behind forbidding the
usage of exim4 functions in these variables?

Best wishes

Norbert

-- Package-specific info:
Exim version 4.67 #1 built 18-Jun-2007 10:32:53
Copyright (c) University of Cambridge 2006
Berkeley DB: Sleepycat Software: Berkeley DB 4.3.29: (September  6, 2005)
Support for: crypteq iconv() IPv6 GnuTLS move_frozen_messages
Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dsearch nis 
nis0 passwd
Authenticators: cram_md5 plaintext
Routers: accept dnslookup ipliteral manualroute queryprogram redirect
Transports: appendfile/maildir/mailstore autoreply lmtp pipe smtp
Fixed never_users: 0
Size of off_t: 8

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.22-rc4 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages exim4 depends on:
ii  debconf [debconf-2.0] 1.5.13 Debian configuration management sy
ii  exim4-base4.67-3 support files for all Exim MTA (v4
ii  exim4-daemon-light4.67-3 lightweight Exim MTA (v4) daemon

exim4 recommends no packages.

-- debconf information:
  exim4/drec:


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#427915: tmw crashes with SIGSEGV on amd64

[Guillaume Melquiond]

Actually, it really is a bug in tmw, due to OpenGL texture indices
having random values.

It is fixed by revision 3334:

http://themanaworld.svn.sourceforge.net/viewvc/themanaworld/tmw/trunk/src/resources/image.cpp?r1=3319&r2=3334&view=patch&pathrev=3334

So I suggest reopening the bug-report, so that it can be properly closed
later, when a new tmw package is released.

Regards,

Guillaume



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429787: mantis: [INTL:eu] basque debconf translation

[Piarres Beobide]

Package: mantis
Severity: wishlist
Tags: patch l10n

Hi

Atached mantis debconf templates basque first translation, plese commit it.

thx


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.21
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages mantis depends on:
ii  apache  1.3.34-4.1   versatile, high-performance HTTP s
ii  apache2-mpm-prefork [apache 2.2.3-5  Traditional model for Apache HTTPD
ii  dbconfig-common 1.8.34   common framework for packaging dat
ii  debconf 1.5.13   Debian configuration management sy
ii  libapache-mod-php4  6:4.4.6-2+b1 server-side, HTML-embedded scripti
ii  libapache2-mod-php5 5.2.3-1  server-side, HTML-embedded scripti
ii  libphp-adodb4.94-1   The 'adodb' database abstraction l
pn  libphp-phpmailer   (no description available)
ii  mysql-client5.0.41-2 MySQL database client (meta packag
ii  mysql-client-5.0 [mysql-cli 5.0.41-2 MySQL database client binaries
ii  php4-cli6:4.4.6-2+b1 command-line interpreter for the p
ii  php4-mysql  6:4.4.6-2+b1 MySQL module for php4
ii  php5-cli5.2.3-1  command-line interpreter for the p
ii  php5-mysql  5.2.3-1  MySQL module for php5

mantis recommends no packages.
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# Piarres Beobide <[EMAIL PROTECTED]>
#
msgid ""
msgstr ""
"Project-Id-Version: Mantis-debconf\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-06-19 20:27-0400\n"
"PO-Revision-Date: 2007-06-20 09:31+0200\n"
"Last-Translator: Piarres Beobide <[EMAIL PROTECTED]>\n"
"Language-Team: Euskara <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Pootle 0.11\n"

#. Type: string
#. Description
#: ../templates:1001
msgid "Mantis administrator e-mail address:"
msgstr "Mantis kudeatzaile eposta helbidea:"

#. Type: string
#. Description
#: ../templates:1001
msgid ""
"Please enter the e-mail address of the administrator who will troubleshoot "
"user reported errors."
msgstr "Mesedez idatzi erabiltzaileen errore txostenei so egin behar dien 
kudeatzailearen eposta helbidea."

#. Type: string
#. Description
#: ../templates:2001
msgid "Mantis webmaster e-mail address:"
msgstr "Mantis webmaster-aren eposta helbidea:"

#. Type: string
#. Description
#: ../templates:2001
msgid ""
"Please enter the webmaster's e-mail address. It will be displayed at the "
"bottom of all Mantis pages."
msgstr "Mesedez idatzi web kudeatzailearen eposta helbidea. Helbide hau Mantis 
orrialdeetan ikusiko da."

#. Type: string
#. Description
#: ../templates:3001
msgid "Sender address for bug report e-mails:"
msgstr "Programa errore txosten mezuen bidaltzaile helbidea:"

#. Type: string
#. Description
#: ../templates:3001
msgid ""
"Please enter the address used as the origin address for Mantis bug report e-"
"mails."
msgstr "Mesedez idatzi Mantis programa errore txostenetan jatorri bezala 
erabiliko den helbidea."

#. Type: string
#. Description
#: ../templates:4001
msgid "E-mail address for bounce-handling:"
msgstr "Errebote kudeaketarako eposta helbidea:"

#. Type: string
#. Description
#: ../templates:4001
msgid ""
"Please enter the address where bounced e-mails will be directed. Typically, "
"this should be set to be the same as the administrator's e-mail address."
msgstr "Mesedez idatzi errebotaturiko posta mezuak birbidaliko diren helbidea. 
Normalean, kudeatzailearen eposta helbide berdina erabili daiteke."

#. Type: boolean
#. Description
#: ../templates:5001
msgid "Configure Apache2 as web server for Mantis?"
msgstr "Apache2 Mantis-erako web zerbitzari bezala konfiguratu?"

#. Type: boolean
#. Description
#: ../templates:5001
msgid ""
"If you accept this option Apache2 will automatically be configured to "
"support Mantis via /etc/apache2/conf.d/ symlinks.  If you reject it, you "
"will have to configure your web server manually."
msgstr "Aukera hau onartuaz gero Apache2 automatikoki konfiguratuko da "
"/etc/apache2/conf.d/ bidez Mantis onartzeko.  Hau baztertuaz gero web "
"zerbitzaria zure kabuz konfiguratu beharko duzu."

#. Type: note
#. Description
#: ../templates:6001
msgid "Administrator's password must be changed:"
msgstr "Kudeatzailearen pasahitza aldatu egin behar da:"

#. Type: note
#. Description
#: ../templates:6001
msgid ""
"By default, the mantis package creates an administrator account. The "
"password for this account is 'root'."
msgstr "Lehenespenez, mantis paketeak kudeaketa kontu bat sortzen du. Kontu 
honen pasahitza

Bug#429217: gnumed-client: gnumed.xpm discrepancy

[Andreas Tille]

On Tue, 19 Jun 2007, Karsten Hilbert wrote:


Not sure whether this counts as a bug or not. It sounds more
like an incompatiblity.


It is no incompatibility - cdd-common should work in any case
because it is in all releases the same and there was no change
especially in the menu part.


I'll let you decide how to eventually handle the bug report.


I'll think about it

  Andreas.

--
http://fam-tille.de


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#428014: introduced in 3.0-19

[Frank Küster]

Jim Paris <[EMAIL PROTECTED]> wrote:

> This bug was introduced in 3.0-19:
>
>  tetex-base  (3.0-19) unstable; urgency=medium
>  ...
>* Add a patch for dvipdfm's config file that allows proper inclusion of
>  really large Postscript files, as reported by Thomas Esser and Laurent
>  Siebenmann  on the TeXLive list.  Thanks to Heiko Oberdiek for the
>  patch.  [frank]
>
> I tested Dan's suggestion: replacing -dEPSCrop in the config file with
>
>   -dDEVICEWIDTHPOINTS=50 -dDEVICEHEIGHTPOINTS=50
>
> solves the problem for me.

I think the problem is that we cannot make everybody happy - there is no
default which would work without problems in all cases.

This is a configuration file; maybe the right fix is to just document
this (in the file and in some README) and leave the choice to the user.

Regards, Frank
-- 
Frank Küster
Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich
Debian Developer (teTeX/TeXLive)

Bug#429736: world readable passwords in /var/cache/debconf/config.dat

[A Mennucc]

On Tue, Jun 19, 2007 at 09:28:05PM +0100, Stefano Zacchiroli wrote:
> Package: zope-debhelper
> Version: 0.3.9
> Severity: grave
> Tags: security
> 
> The maintainer scripts generated by zope-debhelper leave passwords in
> /var/cache/debconf/config.dat. Passwords are therefor world readable by
> any user of the system. Tagging this bug a security since this is a
> local privilege escalation: users can access instances as the
> administrator user.

they should go in /var/cache/debconf/passwords.dat instead

(and that is where zope-common did put them AFAICT)

a.

-- 
Andrea Mennucc

"The EULA sounds like it was written by a team of lawyers who want to tell 
me what I can't do, and the GPL sounds like it was written by a human 
being who wants me to know what I can do."
Anonymous,http://www.securityfocus.com/columnists/420


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429790: the last webmin release is 1.180-3sarge1 !

[[EMAIL PROTECTED]]

Package: webmin
Version: 1.230-1
Severity: grave
Justification: renders package unusable

The last webmin release which can be found in debian packages is the 1.180
while the last release is the 1.350, perhaps it shoul be upgraded.

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.8-3-686-smp (SMP w/1 CPU core)
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages webmin depends on:
ii  debconf [debconf-2.0] 1.5.13 Debian configuration management sy
ii  libauthen-pam-perl0.16-1 Perl interface to PAM library
ii  libnet-ssleay-perl1.30-1 Perl module for Secure Sockets Lay
ii  libpam-runtime0.79-4 Runtime support for the PAM librar
ii  openssl   0.9.8e-5   Secure Socket Layer (SSL) binary a
ii  perl  5.8.8-7Larry Wall's Practical Extraction 

Versions of packages webmin recommends:
pn  logcheck   (no description available)
ii  webmin-core   1.230-1core modules for webmin

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429587: texlive-base-bin: duplicate whatis entry for pkfix(1)

[Norbert Preining]

On Mon, 18 Jun 2007, Matej Vela wrote:
> $ whatis pkfix
> PKFIX (1)- (unknown subject)
> pkfix (1)- replace pk fonts in postscript files with type1 
> versions
> 
> Naturally, lowercasing does the trick...

Thanks, will be fixed in the next upload.

Best wishes

Norbert

---
Dr. Norbert Preining <[EMAIL PROTECTED]>Vienna University of Technology
Debian Developer <[EMAIL PROTECTED]> Debian TeX Group
gpg DSA: 0x09C5B094  fp: 14DF 2E6C 0307 BE6D AD76  A9C0 D2BF 4AA3 09C5 B094
---
BLITHBURY
A look someone gives you by which you become aware that they're much
too drunk to have understood anything you've said to them in the last
twenty minutes.
--- Douglas Adams, The Meaning of Liff


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429657: uses abs() instead of labs()

[Petr Salinger]

clone 429657 -1
reassign -1 abuse-sdl
retitle -1 uses abs() instead of labs()
quit


abuse-sdl-0.7.0 has a gun aiming problem due to a mis-optimisation.
attached is a canned example.


The "dx" and "dy" are defined as longs, so you have to use rather
labs() (and #include  to get the prototype).
The example code with labs() compiles fine under "-O2",
also example code with "long" changed to "int" compiles fine.

On the other hand, on i386 is sizeof(int) == sizeof(long),
so there might be still problem also in gcc-4.1.

Petr


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429789: peth0: received packet with own address as source address

[Adriaan Peeters]

Package: xen-utils-common
Version: 3.0.3-0-2
Severity: normal

Hi,

I am getting the following message in dmesg about twice a minute:

peth0: received packet with  own address as source address

A patch is available in the upstream BTS:
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=339

-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-xen-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages xen-utils-common depends on:
ii  lsb-base  3.1-23 Linux Standard Base 3.1 init scrip
ii  udev  0.105-3/dev/ and hotplug management daemo

xen-utils-common recommends no packages.

-- no debconf information

-- 
Adriaan Peeters


signature.asc
Description: This is a digitally signed message part

Bug#429791: [INTL:gl] Galician debconf template translation for mantis

[Jacobo Tarrio]

Package: mantis
Severity: wishlist
Tags: l10n patch

 It is attached to this report.
# Galician translation of mantis's debconf templates
# This file is distributed under the same license as the mantis package.
# Jacobo Tarrio <[EMAIL PROTECTED]>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: mantis\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-06-19 20:27-0400\n"
"PO-Revision-Date: 2007-06-20 10:14+0200\n"
"Last-Translator: Jacobo Tarrio <[EMAIL PROTECTED]>\n"
"Language-Team: Galician <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: string
#. Description
#: ../templates:1001
msgid "Mantis administrator e-mail address:"
msgstr "Enderezo de email do administrador de Mantis:"

#. Type: string
#. Description
#: ../templates:1001
msgid ""
"Please enter the e-mail address of the administrator who will troubleshoot "
"user reported errors."
msgstr ""
"Introduza o enderezo de email do administrador que ha recibir os informes de "
"erro dos usuarios."

#. Type: string
#. Description
#: ../templates:2001
msgid "Mantis webmaster e-mail address:"
msgstr "Enderezo de email do webmaster de Mantis:"

#. Type: string
#. Description
#: ../templates:2001
msgid ""
"Please enter the webmaster's e-mail address. It will be displayed at the "
"bottom of all Mantis pages."
msgstr ""
"Introduza o enderezo de email do webmaster. Hase amosar no pé de tódalas "
"páxinas de Mantis."

#. Type: string
#. Description
#: ../templates:3001
msgid "Sender address for bug report e-mails:"
msgstr "Enderezo do remitente dos emails con informes de erro:"

#. Type: string
#. Description
#: ../templates:3001
msgid ""
"Please enter the address used as the origin address for Mantis bug report e-"
"mails."
msgstr ""
"Introduza o enderezo a empregar coma remitente dos emails con informes de "
"erro de Mantis."

#. Type: string
#. Description
#: ../templates:4001
msgid "E-mail address for bounce-handling:"
msgstr "Enderezo de email para a xestión de mensaxes devoltas:"

#. Type: string
#. Description
#: ../templates:4001
msgid ""
"Please enter the address where bounced e-mails will be directed. Typically, "
"this should be set to be the same as the administrator's e-mail address."
msgstr ""
"Introduza o enderezo ao que se teñen que enviar as mensaxes devoltas. "
"Normalmente sería o mesmo enderezo que o do administrador."

#. Type: boolean
#. Description
#: ../templates:5001
msgid "Configure Apache2 as web server for Mantis?"
msgstr "¿Configurar Apache2 coma servidor web de Mantis?"

#. Type: boolean
#. Description
#: ../templates:5001
msgid ""
"If you accept this option Apache2 will automatically be configured to "
"support Mantis via /etc/apache2/conf.d/ symlinks.  If you reject it, you "
"will have to configure your web server manually."
msgstr ""
"Se acepta esta opción hase configurar automaticamente Apache2 para que "
"soporte Mantis mediante ligazóns simbólicas /etc/apache2/conf.d/. Se a "
"rexeita, ha ter que configurar manualmente o seu servidor web."

#. Type: note
#. Description
#: ../templates:6001
msgid "Administrator's password must be changed:"
msgstr "Ten que se cambiar o contrasinal do administrador:"

#. Type: note
#. Description
#: ../templates:6001
msgid ""
"By default, the mantis package creates an administrator account. The "
"password for this account is 'root'."
msgstr ""
"Por defecto, o paquete mantis crea unha conta de administrador. O "
"contrasinal desa conta é \"root\"."

#. Type: note
#. Description
#: ../templates:6001
msgid ""
"It is highly recommended to change this password immediately after "
"installation is complete."
msgstr ""
"Recoméndase encarecidamente que cambie ese contrasinal o antes posible "
"despois de completar a instalación."

Bug#429792: num-utils: garbage in expressions returns 0 error codes

[A. Costa]

Package: num-utils
Version: 0.5-8
Severity: normal

'num-utils' expressions with garbage input:

# 'numrange' warns us, but no exit code
% numrange /6..aaa5/ ; echo $?
Invalid expression: 6..aaa5

0

# 'numgrep' doesn't warn...
% numrange -N /-10..-20/  | numgrep /aaa5..-20/ ; echo $?
0

# 'numprocess' repeats the input.
% echo 7 | numprocess /*9,zz%5,+32z/ ; echo $?
7
0

# a warning, but no exit code
% numrandom /1..10/ ; echo $?
Invalid expression: 1..10
Use of uninitialized value in concatenation (.) or string at 
/usr/bin/numrandom line 112.

0

Hope this helps...



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash

Versions of packages num-utils depends on:
ii  perl  5.8.8-7Larry Wall's Practical Extraction 

num-utils recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#428807: Are the macintosh modules builts?

[Yannick Roehlly]

Isn't this related to bug #425072 ?

Yannick


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#423780: #423780 /usr/sbin/smbd: does not log warning when login is tried with non-existent users

[Marc Haber]

On Wed, Jun 20, 2007 at 01:22:13AM +0200, No?l K?the wrote:
> I checked the logging and tested it the following way (Debian lenny with 
> samba 3.0.25a-1):
> 
> $ smbclient -U nouser //localhost/tmp
> Password:
> session setup failed: NT_STATUS_LOGON_FAILURE
> 
> The user "nouser" does not exists. Like you I set the log level to 5.
> 
> In /var/log/samba/log.CLIENTMACHINENAME (in my case ibook)
> ...
> [2007/06/20 01:14:01, 3] auth/auth.c:check_ntlm_password(221)
>   check_ntlm_password:  Checking password for unmapped user [EMAIL PROTECTED] 
> with the new password interface
> [2007/06/20 01:14:01, 3] auth/auth.c:check_ntlm_password(224)
>   check_ntlm_password:  mapped user is: [EMAIL PROTECTED]
> ...
> [2007/06/20 01:14:01, 3] auth/auth_sam.c:check_sam_security(281)
>   check_sam_security: Couldn't find user 'nouser' in passdb.
> [2007/06/20 01:14:01, 5] auth/auth.c:check_ntlm_password(273)
>   check_ntlm_password: sam authentication for user [nouser] FAILED with error 
> NT_STATUS_NO_SUCH_USER
> [2007/06/20 01:14:01, 2] auth/auth.c:check_ntlm_password(319)
>   check_ntlm_password:  Authentication for user [nouser] -> [nouser] FAILED 
> with error NT_STATUS_NO_SUCH_USER
> ...
> 
> So you see the error "Couldn't find user 'nouser' in passdb." is what
> you are looking for, right?

That looks fine to me then.

Greetings
Marc

-- 
-
Marc Haber | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things."Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 621 72739835


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#428629: ignore bind cnames too

[Justin Pryzby]

Actually I'm now using:

^\w{3} [ :0-9]{11} [-._[:alnum:]]+ named\[[0-9]+\]: client [0-9.]{7,15}#[0-9]+: 
view (localhost|any|slave): query: [-._[:alnum:]]+ IN 
(CNAME|A6||A|MX|PTR|TXT|NS|SOA|SSHFP) [-+](E?)$


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426728: [Yaird-devel] Bug#426728:

[Jonas Smedegaard]

B. Zhang wrote:
> "apt-get install initramfs-tools" is a workaround.

Yes, there are alternative ramdisk generators to yaird. Each have their
different qualities.

More info at http://wiki.debian.org/InitrdReplacementOptions


Even if you've lost faith in yaird, it is still helpful if you'd provide
us with the content of your /proc/bus/input/devices pseudo-file.



Kind regards,

 - Jonas


-- 
* Jonas Smedegaard - idealist og Internet-arkitekt
* Tlf.: +45 40843136  Website: http://dr.jones.dk/

 - Enden er nær: http://www.shibumi.org/eoti.htm

Bug#426728: [Yaird-devel] Bug#426728: yaird: fails to create initrd image on powerpc

[Jonas Smedegaard]

Bin Zhang wrote:

> yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq=
> (fatal)
> mkinitrd.yaird failed to create initrd image.

Looks like some odd input device on your system is confusing yaird.

Could you please provide the output of the following command:

cat /proc/bus/input/devices



Kind regards,

 - Jonas

-- 
* Jonas Smedegaard - idealist og Internet-arkitekt
* Tlf.: +45 40843136  Website: http://dr.jones.dk/

 - Enden er nær: http://www.shibumi.org/eoti.htm

Bug#429629: [Yaird-devel] Bug#429629: Fails to create image for raid5

[Jonas Smedegaard]

Gustaf Räntilä wrote:
> Package: yaird
> Version: 0.0.12-20
> 
> yaird fails to create an initrd image for a raid5 system:
> $ sudo mkinitrd.yaird -o /boot/initrd.img-2.6.22-rc5 2.6.22-rc5
> yaird error: Could not read output for /sbin/modprobe -v -n 
> --show-depends --set-version 2.6.22-rc5 raid5 (fatal)
> 
> Seems to me it tries to add the kernel module "raid5" to the image, 
> however, no such module exists in the kernel. Perhaps it's refering to 
> raid456.
> Anyway, it's built with CONFIG_MD_RAID456=y, so it should try to load it 
> as a module in the first place.
> 
> Is this perhaps due to the soon 2 year old bug #337724? If so, perhaps 
> yaird should bail out with an error message like; "doesn't support raid 
> devices" if possible. And I raise a vote to prioritize raid support in 
> yaird. After all, from what I can see, there has been a patch available 
> since that bug was filed.
> 
> Please tell me if I can be of further help in this issue.


Hmm - it is some while ago, but I am pretty sure that I've succesfully
used yaird with RAID5 myself. But that was with modular RAID drivers, so
perhaps that's what trigger  this bug.

No, this seems unrelated to bug#337724 as that concerns dmraid - a
driver for some variants of hardware RAID.

A quick look at the yaird code seems to only explicitly attempt loading
 a "raid5" module when using evms. Do you use EVMS?


Would it be possible for you to try with a kernel built with modular
RAID5? Perhaps even a plain vanilla Debian kernel?

We still should make it work using it builtin - this just to narrow down
the cause of the bug.


 - Jonas

-- 
* Jonas Smedegaard - idealist og Internet-arkitekt
* Tlf.: +45 40843136  Website: http://dr.jones.dk/

 - Enden er nær: http://www.shibumi.org/eoti.htm

Bug#427915: tmw crashes with SIGSEGV on amd64

[Patrick Matthäi]

Guillaume Melquiond schrieb:

Actually, it really is a bug in tmw, due to OpenGL texture indices
having random values.

It is fixed by revision 3334:

http://themanaworld.svn.sourceforge.net/viewvc/themanaworld/tmw/trunk/src/resources/image.cpp?r1=3319&r2=3334&view=patch&pathrev=3334

So I suggest reopening the bug-report, so that it can be properly closed
later, when a new tmw package is released.

Regards,

Guillaume



  

Hello,

yes we discovered it, first it seems like a bug with the 64bit radeon 
driver.
I added this patch to the 0.0.23-2 build, which will be uplaoded in the 
next days.



Thanks and regards,
   Patrick Matthäi

Bug#384558: module-assistant build ieee80211-source fails

[Lucas Nussbaum]

On 24/08/06 at 23:40 -0400, Edward Allcutt wrote:
> Package: ieee80211-source
> Version: 1.1.14-1
> Severity: important
> 
> the error module-assistant reports is:
> debian/rules:6: /usr/share/dpatch/dpatch.make: No such file or directory
> make: *** No rule to make target `/usr/share/dpatch/dpatch.make'. Stop.

Hi,

Any news on this bug?

Seems like there's a valid patch, right?
-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#402245: hs-plugins darcs version supports GHC 6.6

[Lucas Nussbaum]

On 07/04/07 at 21:24 -0400, Bryan Donlan wrote:
> Hi,
> 
> The latest version of hs-plugins in upstream's darcs repository
> supports GHC 6.6. You may want to consider uploading it to
> experimental or sid (though it probably should not be allowed to
> progress to testing until there's a proper release).

Hi,

Any news on this?
-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#393831: more info

[Lucas Nussbaum]

On 19/10/06 at 09:40 +0100, Martin Michlmayr wrote:
> * Wesley J. Landaker <[EMAIL PROTECTED]> [2006-10-18 20:17]:
> > Hmmm... I'll see if upstream can help with this, but it can almost 
> > guarantee 
> > it won't be in time for etch. (It's doubtful upstream has an IA64 to test 
> > on).
> 
> In this case I suggest you get the ia64 binary removed and downgrade
> this bug.

Hi,

Any news on this? I think that the best solution would be to remove the
package from ia64 for now...
-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#414845: knowledgetree: please adapt for PHP5

[Lucas Nussbaum]

On 14/03/07 at 03:50 +0100, Laurent Bonnaud wrote:
> Package: knowledgetree
> Version: 2.0.7-3
> Severity: grave
> Justification: renders package unusable
> 
> 
> Hi,
> 
> here is the problem:
> 
> # apt-get install knowledgetree
> Reading package lists... Done
> Building dependency tree... Done
> Some packages could not be installed. This may mean that you have
> requested an impossible situation or if you are using the unstable
> distribution that some required packages have not yet been created
> or been moved out of Incoming.
> 
> Since you only requested a single operation it is extremely likely that
> the package is simply not installable and a bug report against
> that package should be filed.
> The following information may help to resolve the situation:
> 
> The following packages have unmet dependencies:
>   knowledgetree: Depends: phpapi-20050606 but it is not installable or
>   phpapi-20051025 but it is not installable
> E: Broken packages

Hi,

Any news on this?
-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429795: gutenbrowser: should this package be removed?

[Lucas Nussbaum]

Package: gutenbrowser
Version: 3:0.8.1-1
Severity: serious
User: [EMAIL PROTECTED]
Usertags: proposed-removal

Hi,

While reviewing packages that were not included in Etch, your package
came up as a possible candidate for removal from Debian, because:

 * it doesn't work anymore, and it doesn't look like it's going to be
   fixed.

If you think that it should be orphaned instead of being removed from
Debian, please reply to this bug and tell so.

If you agree, sending the following commands to [EMAIL PROTECTED]
should do it (after replacing nn with this bug's number):
severity nn normal
reassign nn ftp.debian.org
retitle nn RM: gutenbrowser -- RoM; RC buggy
thanks

For more information, see
http://wiki.debian.org/ftpmaster_Removals
http://ftp-master.debian.org/removals.txt

If you disagree and want to continue to maintain this package, please
just close this bug, preferably in an upload also fixing the other
issues.

Thank you,
-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429617: Bug in line 227 of update-exim4.conf

[Marc Haber]

On Tue, Jun 19, 2007 at 11:33:12PM +0200, Silvestre Zabala wrote:
> I ran into the same problems, and as I had a modified exim4-conf I
> moved away /etc/exim4 and tried to reinstall exim4-conf to no avail:
> 
> Running update-exim4.conf with bash -x I saw the following:
> 
> [...]
> + UPEX4C_internal_tmp=/tmp/ex4XdyiYF
> + trap 'rm -f /tmp/ex4XdyiYF' EXIT INT TERM
> + gentmpconf
> + rm -f /var/lib/exim4/config.autogenerated.tmp
> + touch /var/lib/exim4/config.autogenerated.tmp
> ++ id -u
> + '[' 0 = 0 ']'
> + chown root:Debian-exim /var/lib/exim4/config.autogenerated.tmp
> + '[' -e /var/lib/exim4/config.autogenerated ']'
> + chmod 640 /var/lib/exim4/config.autogenerated.tmp
> + '[' -e /var/lib/exim4/config.autogenerated ']'
> + rm -f /tmp/ex4XdyiYF
> 
> So for me the fix was to insert a
> return 0
> after line 227 in update-exim4.conf.

I still do not understand why the packages work fine on all of my
systems, and I do not like the way you have fixed the issue.

How about:

if [ -e "${UPEX4C_outputfile}" ]; then
  chmod 640 "${UPEX4C_outputfile}"
fi

It is a lot less cryptic anyway.

Greetings
Marc

-- 
-
Marc Haber | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things."Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 3221 2323190


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#405913: aptitude: Uncaught exception

[Vincent Lefevre]

On 2007-06-19 21:49:12 -0700, Daniel Burrows wrote:
>   Can you reproduce this with the version of aptitude in experimental?

No, the problem doesn't occur.

-- 
Vincent Lefèvre <[EMAIL PROTECTED]> - Web: 
100% accessible validated (X)HTML - Blog: 
Work: CR INRIA - computer arithmetic / Arenaire project (LIP, ENS-Lyon)

Bug#429794: jmagick: should this package be orphaned?

[Lucas Nussbaum]

Package: jmagick
Version: 6.2.4-1-1
Severity: serious
User: [EMAIL PROTECTED]
Usertags: proposed-orphan

Hi,

While reviewing packages that were not included in Etch, your package
came up as a package that should maybe be orphaned by its maintainer,
because:

 * RC bugs open for a very long time

If you think that it should be removed from Debian instead of being
orphaned, please reply to this bug and tell so.

If you agree that it should be orphaned, sending the following commands
to [EMAIL PROTECTED] should do it (after replacing nn with
this bug's number):

severity nn normal
reassign nn wnpp
retitle nn O:  -- 
thanks

For more information, see
http://www.debian.org/doc/developers-reference/ch-pkgs.en.html#s-archive-manip
http://www.debian.org/devel/wnpp/

If you disagree and want to continue to maintain this package, please
close this bug, preferably in an upload also fixing the other issues.

Thank you,

-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#381817: Maybe libghc6-cabal-dev should be removed?

[Lucas Nussbaum]

On 02/10/06 at 11:10 +0200, Arjan Oosting wrote:
> Op zo, 01-10-2006 te 09:05 -0700, schreef Isaac Jones:
> > Arjan Oosting <[EMAIL PROTECTED]> writes:
> > 
> > > Hi Isaac,
> > >
> > > I was going through the BTS and saw that this RC bug is still open. Do
> > > you think you will upload a new version of libghc6-cabal-dev or could
> > > the package be removed as ghc6 ships a recent version of Cabal now?
> > 
> > I think I will package a new version.  Thanks for watching out for it.
> > If you want to package it for me to sponsor, I'd definitely be happy
> > with that :)
> 
> Allright! Well if you want to keep this package in etch a new version is
> needed. Maybe I will try to package a new version.

Hi,

Any news on this?

This package missed etch, but it's not a reason to miss lenny as well
... :-)
-- 
| Lucas Nussbaum
| [EMAIL PROTECTED]   http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F |


signature.asc
Description: Digital signature

Bug#429651: Bug does not exist in upstream

[Alexej Davidov]

I've tested with the upstream version 2.0.0.4 of firefox, and it worked
as expected. So it seems, this bug is Debian specific.

I can provide any information needed, as soon as I know what that would
be.

Regards,
A.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429797: rdiff-backup: (rs_job_iter) internal error: job made no progress [because of 15GB file]

[Thue Janus Kristensen]

Package: rdiff-backup
Version: 1.1.5-4
Severity: normal


When running rdiff-backup I got the following error:

python: ERROR: (rs_job_iter) internal error: job made no progress [orig_in=828, 
orig_out=65536, final_in=828, final_out=65536]
UpdateError fs_backup/filesys.tar librsync error 107 while in patch cycle

The file fs_backup/filesys.tar is 15GB large.

Note the suspicious number 65536 in the error - looks like somebody used a 
short int (16 bit).

Regards, Thue

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.21.3
Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8)

Versions of packages rdiff-backup depends on:
ii  libc6   2.3.6.ds1-13 GNU C Library: Shared libraries
ii  librsync1   0.9.7-1  Library which implements the rsync
ii  python  2.4.4-2  An interactive high-level object-o
ii  python-support  0.5.6automated rebuilding support for p

Versions of packages rdiff-backup recommends:
ii  python-pylibacl   0.2.1-3.1  module for manipulating POSIX.1e A
ii  python-pyxattr0.2.1-1.1  module for manipulating filesystem

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429796: ITP: libmro-compat-perl -- mro::* interface compatibility for Perls < 5.9.5

[Krzysztof Krzyzaniak (eloy)]

Package: wnpp
Severity: wishlist
Owner: "Krzysztof Krzyzaniak (eloy)" <[EMAIL PROTECTED]>


* Package name: libmro-compat-perl
  Version : 0.03
  Upstream Author : Name <[EMAIL PROTECTED]>
* URL : http://www.cpan.org/
* License : Perl: Artistic/GPL
  Programming Lang: Perl
  Description : mro::* interface compatibility for Perls < 5.9.5

 The "mro" namespace provides several utilities for dealing with method 
 resolution order and method caching in general in Perl 5.9.5 and higher.
 .
 MRO::Compat provides those interfaces for earlier versions of Perl 
 (back to 5.6.0 anyways).


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426728: [Yaird-devel] Bug#426728: Bug#426728: yaird: fails to create initrd image on powerpc

[Jonas Smedegaard]

Tino Keitel wrote:
> On Wed, Jun 20, 2007 at 10:18:00 +0200, Jonas Smedegaard wrote:
>> Bin Zhang wrote:
>>
>>> yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq=
>>> (fatal)
>>> mkinitrd.yaird failed to create initrd image.
>> Looks like some odd input device on your system is confusing yaird.
>>
>> Could you please provide the output of the following command:
>>
>> cat /proc/bus/input/devices
> 
> I also got this error since I use 2.6.22-rc.

On powerpc as well?

Could you please provide the contents of your /proc/bus/input/devices



Kind regards,

 - Jonas


-- 
* Jonas Smedegaard - idealist og Internet-arkitekt
* Tlf.: +45 40843136  Website: http://dr.jones.dk/

 - Enden er nær: http://www.shibumi.org/eoti.htm

Bug#426728: [Yaird-devel] Bug#426728: Bug#426728: yaird: fails to create initrd image on powerpc

[Tino Keitel]

On Wed, Jun 20, 2007 at 11:07:45 +0200, Jonas Smedegaard wrote:
> Tino Keitel wrote:
> > On Wed, Jun 20, 2007 at 10:18:00 +0200, Jonas Smedegaard wrote:
> >> Bin Zhang wrote:
> >>
> >>> yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq=
> >>> (fatal)
> >>> mkinitrd.yaird failed to create initrd image.
> >> Looks like some odd input device on your system is confusing yaird.
> >>
> >> Could you please provide the output of the following command:
> >>
> >> cat /proc/bus/input/devices
> > 
> > I also got this error since I use 2.6.22-rc.
> 
> On powerpc as well?

No, it's an Intel based Mac.

> Could you please provide the contents of your /proc/bus/input/devices

I did, see the attachment in the previous mail.

Regards,
Tino


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#428968: (pas de sujet)

[Edouard Bourguignon]

i had to put PasswordAuthentication to yes in my sshd_config to get sshd 
working, is it correct? (i mean secure?)



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#404856: OpenSync 0.30 is out

[Marcus Better]

tag 404856 -patch
clone 404856 -1
retitle -1 opensync: please use library versioning
tag -1 upstream
forwarded -1 http://www.opensync.org/ticket/467
block 404856 by -1
thanks

So 0.30 is released, and like we feared it has no library versioning at all.

I suggest we don't upload it to Debian until they start versioning, and I will 
try to explain to them why it's important. (Robert, if you disagree then feel 
free to unblock this bug.)

Regards,

Marcus


signature.asc
Description: This is a digitally signed message part.

Bug#429797: This is bug 355178 in librsync1

[Thue Janus Kristensen]

Looking around, I found that this was the same problem as reported in
bug 355178 in librsync1.

Regards, Thue


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429788: update-exim4.conf does not accept more complicated values

[Norbert Preining]

On Mit, 20 Jun 2007, Marc Haber wrote:
> Please move this setting to a macro DCsmarthost in exim configuration,
> see README.Debian chapter 2.1.3.

Ok, thanks.

> dc_smarthost is documented as "a list of hosts". What you did is out
> of spec, and was never supported. That it was working was an accident.

Ok, agreed. Thanks for the information.

Best wishes

Norbert

---
Dr. Norbert Preining <[EMAIL PROTECTED]>Vienna University of Technology
Debian Developer <[EMAIL PROTECTED]> Debian TeX Group
gpg DSA: 0x09C5B094  fp: 14DF 2E6C 0307 BE6D AD76  A9C0 D2BF 4AA3 09C5 B094
---
Someone down there
is trying to kill us!'
`Terrific,' said Arthur.
`But don't you see what this means?'
`Yes. We are going to die.'
`Yes, but apart from that.'
`APART from that?'
`It means we must be on to something!'
`How soon can we get off it?'
 --- Zaphod and Arthur in a certain death situation over
 --- Magrathea.
 --- Douglas Adams, The Hitchhikers Guide to the Galaxy


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429799: listadmin speaks broken https

[Jörg Sommer]

Package: listadmin
Version: 2.37-1
Severity: normal

Hi,

% listadmin  
fetching data for [EMAIL PROTECTED] ... 
ERROR: fetching https://lists.gnucash.org/mailman/admindb/gnucash-de
ERROR: Server returned '404 WWWOFFLE Illegal Protocol' -- skipping list

% tcpdump -r /tmp/la.tcpdump-log+ -X
10:55:18.300039 IP iBook.localnet.44454 > server.localnet.webcache: P 
1:286(285) ack 1 win 92 
   0x:  4500 0151 4806 4000 4006 704a c0a8 0005  [EMAIL PROTECTED]@.pJ
   0x0010:  c0a8 0001 ada6 1f90 b08f f6e3 36a9 046c  6..l
   0x0020:  8018 005c 829a  0101 080a 00b6 beef  ...\
   0x0030:  4e12 3e2e 504f 5354 2068 7474 7073 3a2f  N.>.POST.https:/
 ^^^

This is not a valid start for a https connection through a proxy.

Bye, Jörg.

-- System Information:
Debian Release: unstable/experimental
  APT prefers unstable
  APT policy: (900, 'unstable'), (700, 'experimental')
Architecture: powerpc (ppc)

Kernel: Linux 2.6.22-rc4
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages listadmin depends on:
ii  libcrypt-ssleay-perl  0.55-1 Support for https protocol in LWP
ii  libtext-reform-perl   1.11-5 Perl module for manual text wrappi
ii  libwww-perl   5.805-1WWW client/server library for Perl

listadmin recommends no packages.

-- no debconf information


la.tcpdump-log+
Description: tcpdump log


pgpBTne2PWxwD.pgp
Description: PGP signature

Bug#426728: [Yaird-devel] Bug#426728: yaird: fails to create initrd image on powerpc

[B. Zhang]

On Wed, 2007-06-20 at 10:18 +0200, Jonas Smedegaard wrote:
> Bin Zhang wrote:
> 
> > yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq=
> > (fatal)
> > mkinitrd.yaird failed to create initrd image.
> 
> Looks like some odd input device on your system is confusing yaird.
> 
> Could you please provide the output of the following command:
> 
> cat /proc/bus/input/devices
> 
$ cat /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=mouse0 event0 
B: EV=7
B: KEY=7 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0017 Vendor=0001 Product=22c4 Version=0200
N: Name="ADB keyboard"
P: Phys=adb2:2.c4/input
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: EV=120003
B: KEY=feb0ffdf 3cf  fffe
B: LED=7

I: Bus=0017 Vendor=0001 Product=771f Version=0100
N: Name="ADB Powerbook buttons"
P: Phys=adb7:7.1f/input
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=kbd event2 
B: EV=13
B: KEY=7b 0 2 0 e 0 0 0

I: Bus=0017 Vendor=0001 Product=3301 Version=0100
N: Name="ADB mouse"
P: Phys=adb3:3.01/input
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=mouse1 event3 
B: EV=7
B: KEY=7 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0019 Vendor=0001 Product=0001 Version=0100
N: Name="PMU"
P: Phys=
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4 
B: EV=23
B: KEY=10 0 0 0
B: SW=1

I: Bus=0003 Vendor=05ac Product=1000 Version=0111
N: Name="HID 05ac:1000"
P: Phys=usb-0001:10:1a.0-1/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5 
B: EV=120003
B: KEY=e080ffdf 1cf  fffe
B: LED=1f

I: Bus=0003 Vendor=05ac Product=1000 Version=0111
N: Name="HID 05ac:1000"
P: Phys=usb-0001:10:1a.0-1/input1
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=mouse2 event6 
B: EV=7
B: KEY=1f 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0017 Vendor=001f Product=0001 Version=0100
N: Name="PowerMac Beep"
P: Phys=powermac/beep
S: Sysfs=/class/input/input7
U: Uniq=
H: Handlers=kbd event7 
B: EV=40001
B: SND=6


Thanks and best regards,
Bin



> 
> 
> Kind regards,
> 
>  - Jonas
> 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#423425: Evtouch crashes X when setting date

[Jeremy Powell]

Here is the backtrace from the X server when a crash occurs from setting 
the date and tapping the screen simultaneously:


0x40225938 in select () from /lib/libc.so.6
(gdb) continue
Continuing.

Program received signal SIGSEGV, Segmentation fault.
0x0015e62c in WaitForSomething ()
(gdb) bt
#0  0x0015e62c in WaitForSomething ()
#1  0x00047f2c in Dispatch ()
#2  0x0002e48c in main ()





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426728: [Yaird-devel] Bug#426728:

[B. Zhang]

On Wed, 2007-06-20 at 10:22 +0200, Jonas Smedegaard wrote:
> B. Zhang wrote:
> > "apt-get install initramfs-tools" is a workaround.
> 
> Yes, there are alternative ramdisk generators to yaird. Each have their
> different qualities.

You are right.

> 
> More info at http://wiki.debian.org/InitrdReplacementOptions
> 
> 
> Even if you've lost faith in yaird, 

I said "initramfs-tools is a _workaround_ for _me_". :)

> it is still helpful if you'd provide
> us with the content of your /proc/bus/input/devices pseudo-file.
> 
In my previous message.

Thanks and best regards,
Bin

> 
> 
> Kind regards,
> 
>  - Jonas
> 
> 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429800: please consider adding inn2-dbg package

[Marc Haber]

Package: inn2
Version: 2.4.3-1
Severity: wishlist

Hi,

as inn2 segfaulting is something an administrator is accustomed to, it
would be great to be able to obtain backtraces from the packages. With
modern debhelper, it is rather easy to package up debug information
during package build.

Please consider adding that possibility.

I would be willing to deliver a patch if the maintainer indicates to
accept it.

Greetings
Marc

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.21.5-scyw00225 (PREEMPT)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages inn2 depends on:
ii  cron  3.0pl1-100 management of regular background p
ii  debconf [debconf-2.0] 1.5.13 Debian configuration management sy
ii  exim4-daemon-light [mail-tran 4.67-1 lightweight exim MTA (v4) daemon
ii  inn2-inews2.4.3-1NNTP client news injector, from In
ii  libc6 2.5-11 GNU C Library: Shared libraries
ii  libdb4.4  4.4.20-8   Berkeley v4.4 Database Libraries [
ii  libpam0g  0.79-4 Pluggable Authentication Modules l
ii  libperl5.85.8.8-7Shared Perl library
ii  libssl0.9.8   0.9.8e-5   SSL shared libraries
ii  perl  5.8.8-7Larry Wall's Practical Extraction 
ii  perl-base [perlapi-5.8.8] 5.8.8-7The Pathologically Eclectic Rubbis
ii  procps1:3.2.7-3  /proc file system utilities
ii  time  1.7-21 The GNU time program for measuring

inn2 recommends no packages.

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429802: inn2: segfaults in certain incoming.conf situations

[Marc Haber]

Package: inn2
Version: 2.4.3-1
Severity: normal

Hi,

my inn2 (on etch) segfaults in some situations depending on the
_order_ or entries in incoming conf.

For example:


streaming:  true   # streaming allowed by default
max-connections:8  # per feed

peer ME {
  hostname: "localhost, 127.0.0.1, ::1"
}

group peers {
patterns: 
"@ka.*,@tnib.*,@bofh.*,@fur.*,@*.bina*,@*.baina*,@hr.*binar*,!junk,!control,!control.*"

peer news.turmzimmer.net {
}



group ka-peers {
patterns:   
"@tnib.*,@bofh.*,@fur.*,@*.bina*,@*.baina*,@hr.*binar*,!junk,!control,!control.*"
peer news.belwue.de {
}

peer news.bawue.net {
hostname: "news.bawue.net,feed.news.bawue.net"
}

peer torres.zugschlus.de {
hostname: "torres.zugschlus.de"
}

peer news.akk.org {
hostname: "akk3-dmz.akk.uni-karlsruhe.de"
}
}
}


When I exchange the last two peers, giving:
group ka-peers {
patterns:   
"@tnib.*,@bofh.*,@fur.*,@*.bina*,@*.baina*,@hr.*binar*,!junk,!control,!control.*"
peer news.belwue.de {
}

peer news.bawue.net {
hostname: "news.bawue.net,feed.news.bawue.net"
}

peer news.akk.org {
hostname: "akk3-dmz.akk.uni-karlsruhe.de"
}

peer torres.zugschlus.de {
hostname: "torres.zugschlus.de"
}
}

inn segfaults at startup.

Before closing this bug report with "send a patch", please refer to
the Developer's Reference, Chapter 3.5, first paragraph.

Greetings
Marc

-- System Information:
Debian Release: etch
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.21.5-zgsrv (PREEMPT)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages inn2 depends on:
ii  cron  3.0pl1-100 management of regular background p
ii  debconf [debconf-2.0] 1.5.11 Debian configuration management sy
ii  exim4-daemon-light [mail-tran 4.67-3~zg1 lightweight exim MTA (v4) daemon
ii  inn2-inews2.4.3-1NNTP client news injector, from In
ii  libc6 2.3.6.ds1-13 GNU C Library: Shared libraries
ii  libdb4.4  4.4.20-8   Berkeley v4.4 Database Libraries [
ii  libpam0g  0.79-4 Pluggable Authentication Modules l
ii  libperl5.85.8.8-7Shared Perl library
ii  libssl0.9.8   0.9.8c-4   SSL shared libraries
ii  perl  5.8.8-7Larry Wall's Practical Extraction 
ii  perl-base [perlapi-5.8.8] 5.8.8-7The Pathologically Eclectic Rubbis
ii  procps1:3.2.7-3  /proc file system utilities
ii  time  1.7-21 The GNU time program for measuring

inn2 recommends no packages.

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429801: ITP: libclass-accessor-grouped-perl -- build groups of accessors

[Krzysztof Krzyzaniak (eloy)]

Package: wnpp
Severity: wishlist
Owner: "Krzysztof Krzyzaniak (eloy)" <[EMAIL PROTECTED]>


* Package name: libclass-accessor-grouped-perl
  Version : x.y.z
  URL : http://www.cpan.org/
* Upstream Author : Matt S. Trout <[EMAIL PROTECTED]>
Christopher H. Laco <[EMAIL PROTECTED]>.
* License : Perl: Artistic/GPL
  Programming Lang: Perl
  Description : build groups of accessors

 Class::Accessor::Grouped lets you build groups of accessors that will call 
 different getters and setters.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#419874: amavis-stat patch

[Daniel Smolik]

Here is patch made with diff -ur then solves my problem.

Dan


--- amavis-stats.php	2006-12-04 08:24:00.0 +0100
+++ amavis-stats.php.new	2007-06-20 11:24:57.0 +0200
@@ -57,7 +57,7 @@
 */
 
 global $asVersion;
-$asVersion = "";
+$asVersion = "0.1.12-7.4";
 
 // The rrdstep value MUST match that which is used by the perl script.
 // don't change one without the other.
@@ -106,7 +106,7 @@
 }
 
 array_shift($output);
-
+
 foreach ($output as $index => $value) {
 $retval[calcpr][$index] = $value;
 }
@@ -645,7 +645,7 @@
 
 $opts[] = "COMMENT:\\n"; 
 $opts[] = "COMMENT:amavis-stats v$asVersion ";
-$opts[] = "COMMENT:$enddate \\r";
+$opts[] = "COMMENT:". str_replace(":", "\:", $enddate) . "\\r";
 
 asDbg($opts);
 $ret = rrd_graph("/usr/share/amavis-stats/$img" , $opts, count($opts));
@@ -769,7 +769,7 @@
 }
 */
 $opts[] = "COMMENT:amavis-stats v$asVersion ";
-$opts[] = "COMMENT:$enddate" . str_replace(":", "\:", $enddate) . " \\r";
+$opts[] = "COMMENT:". str_replace(":", "\:", $enddate) . " \\r";
 
 /*
 * debugging - graph definitions

Bug#429796: ITP: libmro-compat-perl -- mro::* interface compatibility for Perls < 5.9.5

[Krzysztof Krzyżaniak]

Krzysztof Krzyzaniak (eloy) wrote:

Package: wnpp
Severity: wishlist
Owner: "Krzysztof Krzyzaniak (eloy)" <[EMAIL PROTECTED]>


* Package name: libmro-compat-perl
  Version : 0.03
  Upstream Author : Name <[EMAIL PROTECTED]>


The upstream author is:  Brandon L. Black, <[EMAIL PROTECTED]>.


* URL : http://www.cpan.org/
* License : Perl: Artistic/GPL
  Programming Lang: Perl
  Description : mro::* interface compatibility for Perls < 5.9.5

 The "mro" namespace provides several utilities for dealing with method 
 resolution order and method caching in general in Perl 5.9.5 and higher.

 .
 MRO::Compat provides those interfaces for earlier versions of Perl 
 (back to 5.6.0 anyways).



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core)
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)
Shell: /bin/sh linked to /bin/bash




--
[EMAIL PROTECTED]

   jak to dobrze, że są oceany - bez nich byłoby jeszcze smutniej

Bug#429331: Smarter Cover Art finder

[Erich Schubert]

Hi,
I can't reply at berlios. Maybe you can forward this mail?

I tried locating the cover finding code in sonata.py, but failed to
understand it's logic completely. It re-uses the code for determining
the output filename with different "forced locations" for finding the
cover art to show.
So it does indeed already check for all the 'saveable' local file names.

It would be nice to be able to give Sonata a larger search sequence.
For example, I'm using .folder.jpg for the thumbnail sized covers (which
is what I'd like sonata to use). I think KDE default would
be .folder.png, which is at least the default for albumart-qt
(.folder.jpg doesn't work in Konqueror even when referenced by
the .desktop file, don't ask me why).
Windows systems seem to use AlbumArt.* and AlbumArtSmall.*, so checking
for these would probably make sense, too. I've seen "front.jpg" a lot,
but also with other capitalization (!) and/or file extensions (!).

best regards,
Erich Schubert
-- 
 erich@(vitavonni.de|debian.org)--GPG Key ID: 4B3A135C(o_
  There is no branch of mathematics, however abstract, which may not  //\
 some day be applied to phenomena of the real world. --- Lobatchevsky V_/_
  Die Mathematik muss man schon deswegen studieren, weil sie
  die Gedanken ordnet. --- Michail Wassiljewitsch Lomonossow



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#355178: I am hitting this too

[Thue Janus Kristensen]

I am also hitting this, while rdiff-backupping between two x86-32 systems.

A fix in the official Debian packages would be very handy, compared to
compiling, installing and maintaining my own packages.

Regards, Thue


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#407036: xserver-xorg: Server crashes each time after hibernate with suspend2

[Bruce MacDonald]

Hi Brice, ssh from another machine and screen is a good idea thanks. I
tried that and gdb attaches properly to X but when I suspend the
laptop it crashes (ie the whole machine crashes, not just the X
server; I had to force a power down then power up again). That is even
with the old xserver that normally suspends ok.

I also tried again for a core file (I didn't have ulimit set properly
and now I do), but no core file is created when the resume crashes my
laptop (using the latest xserver-xorg-core). I do have the
NoTrapSignals option set and it is recognized in the Xorg log file.

So run out of things to try again ... 

Bruce

On Sun, Jun 17, 2007 at 01:31:38PM +0200, Brice Goglin wrote:
> Bruce MacDonald wrote:
> > Hi, Any ideas for debugging this problem? I can't login from a second
> > machine since the resume script has to remove and reinstall the
> > network driver for both wired and wireless. I couldn't get a core dump
> > by setting the NoTrapSignals option in ServerFlags. I tried a script
> > suggested on x.org for server debugging but X would not start at all, 
> > from
> >
> > http://wiki.x.org/wiki/Development/Documentation/ServerDebugging
> >
> > But I've never debugged the X server before.
> >
> > Bruce
> >   
> 
> One idea would be to keep gdb in a screen that you attach/detach from ssh:
> * login through ssh before suspend, launch "screen", and attach "gdb -p
> $(pidof X)" from there
> * suspend/resume, and make sure the network is back
> * login again by ssh again, reacquire the screen with something like
> "screen -rd"
> * once X has crashed, work in gdb with 'bt full' or so
> 
> Somebody put some Debian-specific hints about debugging (including with
> a coredump) at http://wiki.debian.org/XStrikeForce/XserverDebugging by I
> never actually tried it.
> 
> Brice
> 
> 
> 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#154204: xserver-xfree86: [ati/r128] SEGV when memory tight and using Xv applications on Rage 128 RF rev 0

[Pierre Souchay]

Le mardi 19 juin 2007, Brice Goglin a écrit :
> Hi,
>
> About 5 years ago, you reported a bug to the Debian BTS regarding a
> segfault of the X server when memory is tight and a Xv application is
> running on a Rage 128 board. Did you reproduce this problem recently?
> With Xorg/Etch? With latest xserver-xorg-core and drivers? If not, I
> will close this bug in the next weeks.

You can close it.

>
> Thanks,
> Brice




pgpQe3cgg3y1V.pgp
Description: PGP signature

Bug#429663: Acknowledgement (SqlCommand sets connection closed after one query)

[Conny Brunnkvist]

reassign 429663 mono
thanks

After talking to the authors, they hinted that this particular bug  
was fixed in trunk. I downloaded[1] and built the snapshot from  
2007-06-18 and can confirm that System.Data.SqlClient *is* usable again.


The relevant patch is the one included in the mailing list posting  
that I referred to previously.


//conny


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#420072: xine menu not shown in fullscreen mode

[Emil Nowak]

Hello,
I cannot reproduce this with current KDE (3.5.7-1) and current xine-ui
(0.99.5-2). Maybe you had some special settings in kwin. Some auto-focus, and
raise on focus and maybe something else...

Maybe You should try creating new user, and then testing this bug on clean
KDE configuration. 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429331: Smarter Cover Art finder

[Erich Schubert]

Hi,
> For example, I'm using .folder.jpg for the thumbnail sized covers (which
> is what I'd like sonata to use). I think KDE default would
> be .folder.png, which is at least the default for albumart-qt

Ok, granted: the Freedesktop Icon specs indeed doesn't allow JPG:

---
The supported image file formats are PNG, XPM and SVG. [...] not
recommended that new themes use XPM files. Support for SVGs is optional.
---
This would be another way of locating appropriate icons: checking for
a .desktop file containing an Icon= statement.

best regards,
Erich Schubert
-- 
   erich@(vitavonni.de|debian.org)--GPG Key ID: 4B3A135C(o_
Go away or i'll replace you with a very small shell script. //\
 Die einzige Hoffnung auf Freude liegt in den menschlichen  V_/_
 Beziehungen. --- Antoine de Saint-Exupéry

Bug#429804: gdmXnest show just the gey dotted screen instead of login screen

[Emil Nowak]

Package: gdm
Version: 2.18.2-1
Severity: normal

When I start gdmXnest I have just this black on white dots (default Xserver
screen or whatever it is) [screenshot attached] Instead of login screen.

I remember that few version ago it was working perfectly (something around
half year ago).

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.22-rc4-686 (SMP w/1 CPU core)
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)
Shell: /bin/sh linked to /bin/bash

Versions of packages gdm depends on:
ii  adduser3.102 Add and remove users and groups
ii  cdebconf [debconf-2.0] 0.116 Debian Configuration Management Sy
ii  debconf [debconf-2.0]  1.5.13Debian configuration management sy
ii  gksu   1.9.4-1   graphical frontend to su
ii  icewm [x-window-manager]   1.2.30-1  wonderful Win95-OS/2-Motif-like wi
ii  icewm-experimental [x-wind 1.2.30-1  wonderful Win95-OS/2-Motif-like wi
ii  konsole [x-terminal-emulat 4:3.5.7-1 X terminal emulator for KDE
ii  kwin [x-window-manager]4:3.5.7-1 the KDE window manager
ii  libart-2.0-2   2.3.19-3  Library of functions for 2D graphi
ii  libatk1.0-01.18.0-2  The ATK accessibility toolkit
ii  libattr1   1:2.4.32-1.1  Extended attribute shared library
ii  libc6  2.5-5 GNU C Library: Shared libraries
ii  libcairo2  1.4.6-1   The Cairo 2D vector graphics libra
ii  libdbus-1-31.1.0-1   simple interprocess messaging syst
ii  libdbus-glib-1-2   0.73-2simple interprocess messaging syst
ii  libdmx11:1.0.2-2 X11 Distributed Multihead extensio
ii  libfontconfig1 2.4.2-1.2 generic font configuration library
ii  libglade2-01:2.6.0-2 library to load .glade files at ru
ii  libglib2.0-0   2.12.12-1 The GLib library of C routines
ii  libgnomecanvas2-0  2.14.0-2  A powerful object-oriented display
ii  libgtk2.0-02.10.13-1 The GTK+ graphical user interface 
ii  libpam-modules 0.79-3Pluggable Authentication Modules f
ii  libpam-runtime 0.79-3Runtime support for the PAM librar
ii  libpam0g   0.79-3.2  Pluggable Authentication Modules l
ii  libpango1.0-0  1.16.4-1  Layout and rendering of internatio
ii  libpopt0   1.10-2lib for parsing cmdline parameters
ii  librsvg2-2 2.16.1-2  SAX-based renderer library for SVG
ii  librsvg2-common2.16.1-2  SAX-based renderer library for SVG
ii  libselinux12.0.15-2  SELinux shared libraries
ii  libwrap0   7.6.dbs-9 Wietse Venema's TCP wrappers libra
ii  libx11-6   2:1.0.3-5 X11 client-side library
ii  libxau61:1.0.3-2 X11 authorisation library
ii  libxcursor11:1.1.8-2 X cursor management library
ii  libxdmcp6  1:1.0.2-2 X11 Display Manager Control Protoc
ii  libxext6   1:1.0.3-2 X11 miscellaneous extension librar
ii  libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio
ii  libxi6 1:1.0.1-3 X11 Input extension library
ii  libxinerama1   1:1.0.2-1 X11 Xinerama extension library
ii  libxml22.6.29.dfsg-1 GNOME XML library
ii  libxrandr2 2:1.2.1-1 X11 RandR extension library
ii  libxrender11:0.9.2-1 X Rendering Extension client libra
ii  lsb-base   3.1-3 Linux Standard Base 3.1 init scrip
ii  metacity [x-window-manager 1:2.18.3-1A lightweight GTK2 based Window Ma
ii  mrxvt [x-terminal-emulator 0.5.2-2   lightweight multi-tabbed X termina
ii  multi-gnome-terminal [x-te 1.6.2-13  Enhanced the GNOME Terminal
ii  oroborus [x-window-manager 2.0.18A lightweight themeable windowmana
ii  powershell [x-terminal-emu 0.9-8 powerful terminal emulator for GNO
ii  rxvt [x-terminal-emulator] 1:2.6.4-10VT102 terminal emulator for the X 
ii  rxvt-unicode-lite [x-termi 7.9-1 RXVT-like terminal emulator with b
ii  xbase-clients  1:7.2.ds2-2   miscellaneous X clients
ii  xfce4-terminal [x-terminal 0.2.6-2   Xfce terminal emulator
ii  xterm [x-terminal-emulator 226-1 X terminal emulator

Versions of packages gdm recommends:
ii  dialog1.1-20070604-1 Displays user-friendly dialog boxe
pn  gdm-themes (no description available)
ii  whiptail  0.52.2-4   Displays user-friendly dialog boxe
ii  zenity2.18.2-1   Display graphical dialog boxes fro

-- debconf information:
  gdm/daemon_name: /usr/bin/gdm
*

Bug#429806: adept-* depends on libapt-pkg-libc6.3-6-3.11

[Thomas Preud'homme]

Package: adept
Version: 2.1.2

# apt-get install adept
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed.
This may mean that you have requested an impossible situation or if  
you are using the unstable distribution that some required packages  
have not yet been created or been moved out of Incoming.

Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
adept: Depends: adept-manager but it is not going to be installed
Depends: adept-installer but it is not going to be installed
Depends: adept-updater but it is not going to be installed
Depends: adept-notifier but it is not going to be installed
E: Broken packages

Indeed because adept-installer, adept-updater and adept-notifier  
depends on libapt-pkg-libc6.3-6-3.11 whereas apt in sid provides  
libapt-pkg-libc6.5-6-4.4


kernel 2.6.21-1-k7
libc6 : 2.5-11
apt : 0.7.2

Thomas Preud'homme


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#428865: more understanding of the bird hang on ifdown/ifup

[Florian Lohoff]

Hi,
i debugged further and build a version with debugging symbols and
put an assert into the code where we detect the out of sequence
netlink message. My understanding is that we do an krt_if_scan on a
regular basis - Now we go through the notification chain and end up
sending another netlink message before krt_if_scan pulled all netlink
messages. nl_get_reply gets an out-of-sequence netlink message and drops
it although nl_get_scan would need it for an end-of-messages marker. Thus
returning from our notification chain nl_get_scan ends up polling for the
next message which already got removed via nl_send_route -> nl_exchange ->
nl_get_reply as an out-of-sequence. As the netlink FD is blocking we
deadlock here.

One solution i see would be to convert all nl_get_scan users to first
poll ALL messages before starting to process them which could mean a lot 
of memory usage especially on full routing BGP where we need to poll all
routes first. 

Another solution would be to make some generic polling/callback based
approach, or probably replacing the netlink.c with an API wrapper around
libnl (http://people.suug.ch/~tgr/libnl/)

(gdb) bt
#0  0xb7e3e947 in raise () from /lib/tls/libc.so.6
#1  0xb7e400c9 in abort () from /lib/tls/libc.so.6
#2  0xb7e3805f in __assert_fail () from /lib/tls/libc.so.6
#3  0x08078a09 in nl_get_reply () at netlink.c:135
#4  0x08078b0d in nl_exchange (pkt=0xbfe3f2b4) at netlink.c:193
#5  0x08079562 in nl_send_route (p=0x80905a0, e=0x809921c, new=0) at 
netlink.c:542
#6  0x080795d2 in krt_set_notify (p=0x80905a0, n=0x80981c4, new=0x0, 
old=0x809921c)
at netlink.c:561
#7  0x0807614e in krt_notify (P=0x80905a0, net=0x80981c4, new=0x0, 
old=0x809921c,
attrs=0x0) at krt.c:698
#8  0x08049910 in do_rte_announce (a=0x8095e40, net=0x80981c4, new=0x80991cc,
old=0x809921c, tmpa=0x0, class=4100)
at /home/flo/p/root/bird-1.0.11/./nest/rt-table.c:227
#9  0x08049521 in rte_announce (tab=0x808f4b0, net=0x80981c4, new=0x80991cc,
old=0x809921c, tmpa=0x0) at 
/home/flo/p/root/bird-1.0.11/./nest/rt-table.c:261
#10 0x08049b94 in rte_recalculate (table=0x808f4b0, net=0x80981c4, p=0x80906c8,
new=0x80991cc, tmpa=0x0) at 
/home/flo/p/root/bird-1.0.11/./nest/rt-table.c:368
#11 0x08049ff1 in rte_update (table=0x808f4b0, net=0x80981c4, p=0x80906c8,
new=0x80991cc) at /home/flo/p/root/bird-1.0.11/./nest/rt-table.c:514
#12 0x0804fd41 in dev_ifa_notify (p=0x80906c8, c=1, ad=0x8095c80)
at /home/flo/p/root/bird-1.0.11/./nest/rt-dev.c:69
#13 0x0804e962 in ifa_send_notify (p=0x80906c8, c=1, a=0x8095c80)
at /home/flo/p/root/bird-1.0.11/./nest/iface.c:148
#14 0x0804e87e in ifa_notify_change (c=1, a=0x8095c80)
at /home/flo/p/root/bird-1.0.11/./nest/iface.c:159
#15 0x0804ea7d in if_notify_change (c=1, i=0x8095b38)
at /home/flo/p/root/bird-1.0.11/./nest/iface.c:211
#16 0x0804ed24 in if_update (new=0xbfe3f5ec)
at /home/flo/p/root/bird-1.0.11/./nest/iface.c:280
#17 0x08078f5c in nl_parse_link (h=0x80919b8, scan=1) at netlink.c:334
#18 0x080792a1 in krt_if_scan (p=0x8090778) at netlink.c:445
#19 0x08074fd5 in kif_scan (t=0x8095af8) at krt.c:94
#20 0x08075004 in kif_force_scan () at krt.c:102
#21 0x08076018 in krt_scan (t=0x8095a48) at krt.c:655
#22 0x08073005 in tm_shot () at io.c:298
#23 0x08074886 in io_loop () at io.c:1126
#24 0x080774ef in main (argc=Cannot access memory at address 0x67ec
) at main.c:462 


-- 
Florian Lohoff  [EMAIL PROTECTED] +49-171-2280134
Those who would give up a little freedom to get a little 
  security shall soon have neither - Benjamin Franklin


signature.asc
Description: Digital signature

Bug#428493: closed by Benjamin Seidenberg <[EMAIL PROTECTED]> (Not a bug)

[Angel Abad (Ikusnet SLL)]

Hi Benjamin! Really libcairo2-dev depends on libpng12-dev, but if you
use experimental you can have installed libpng14-dev, and then
guifications dont compile.

Bye!

On lun, jun 18, 2007 at 05:09:51 +, Debian Bug Tracking System wrote:
> This is an automatic notification regarding your Bug report
> #428493: guifications: No libpng12-dev in Build-Depends,
> which was filed against the guifications package.
> 
> It has been closed by Benjamin Seidenberg <[EMAIL PROTECTED]>.
> 
> Their explanation is attached below.  If this explanation is
> unsatisfactory and you have not received a better one in a separate
> message then please contact Benjamin Seidenberg <[EMAIL PROTECTED]> by 
> replying
> to this email.
> 
> Debian bug tracking system administrator
> (administrator, Debian Bugs database)
> 

> From: Benjamin Seidenberg <[EMAIL PROTECTED]>
> Subject: Not a bug
> Date: Mon, 18 Jun 2007 17:38:24 +0100
> Message-ID: <[EMAIL PROTECTED]>
> User-Agent: Icedove 1.5.0.12 (X11/20070607)
> To: [EMAIL PROTECTED]
> 
> This dependency is unnecessary.  guifications build-depends on
> libgtk2.0-dev which depends on libcairo2-dev which depends on
> libpng12-dev, so libpng12-dev is brought in implicitly.
> 
> Benjamin
> 


-- 
Angel Abad (Ikusnet SLL)
[EMAIL PROTECTED]

Mil maneras de sentir y una de decir que no!


signature.asc
Description: Digital signature

Bug#428908: ["José Manuel Pérez" <[EMAIL PROTECTED]>] Bug#428908: Problem whit the installation of auctex on testing

[Davide G. M. Salvetti]

>From the bug submitter.

-- 
Ciao, Davide
--- Begin Message ---
Hi, Davide.

I have the solution at this bug.
I review the usr/share/emacs21/site-lisp/auctex/CompilationLog and see that :

configure: error: LaTeX not found, aborting!
You must install LaTeX for preview to work.

so, i decided to purge all about emacs and install firts :

apt-get install texlive.
because i understand that here we find latex, the documentation about
de texlive says "This metapackage provides a decent selection of the
TeX Live packages
which should suffice for the most common tasks." and effectively i
find  "latex" in the package "texlive-latex-base".
next i tried to install auctex, which depends en testing are :
 emacs21 emacs21-bin-common emacs21-common emacsen-common, so  apt
install all dependents for next install and configure auctex, and all
it's ok, :)
I use auctex fine.

Thanks for you attention.

--- End Message ---

Bug#429807: gnome-sudoku screws up other package updates dependant on python-support

[Bryan Cebuliak]

Package: gnome-sudoku
Version: 0.7.1-1
Severity: normal

--- Please enter the report below this line. ---
I could not update  some  python-support  dependant  packages. Some message 
about  about overwriting  some   file 
in /usr/share/python-support/gnome-games-data/*.py.
I had to purge python-support and files  dependant  thereon. Then  purge  
gnome-sudoku. Then  reinstall everything  except this broken mess of a  
package. Surprised it hasn't been  reported. Probably shows  how  much 
anybody cares  about  this package. What a  drag.

--- System information. ---
Architecture: i386
Kernel:   Linux 2.6.21-1-686

Debian Release: lenny/sid
  500 unstablewww.debian-multimedia.org 
  500 unstableftp.au.debian.org 

--- Package information. ---
Depends  (Version) | Installed
==-+-==
python(<< 2.5) | 2.4.4-6
python(>= 2.4) | 2.4.4-6
python-support(>= 0.2) | 0.6.4
python-gtk2   (>= 2.8.6-3) | 2.10.4-3
python-imaging(>= 1.1.5-4) | 1.1.6-1
python-glade2 (>= 2.6.3-2) | 2.10.4-3
python-gnome2(>= 2.10.0-4) | 2.18.2-1
python-gnome2-extras (>= 2.10.2-1) | 2.14.3-1
python-numeric (>= 24.2-1) | 24.2-8
librsvg2-common   (>= 2.9.5-4) | 2.16.1-2


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#228907: new upstream version

[Roger Lynn]

On Sat, May 08, 2004 at 07:06:42PM +0100, Roger Lynn wrote:
> On Wed, Jan 21, 2004 at 05:19:14PM +0100, henry precheur wrote:
> > Package: thttpd
> > Version: 2.23beta1-2.3
> > 
> > new upstream version availiable at:
> > http://www.acme.com/software/thttpd/thttpd-2.25b.tar.gz
> 
> I expect that it's probably too late now, but is there any chance of
> getting this packaged in time for Sarge, please?

I have now switched to Lighttpd, as thttpd effectively seems to be 
unmaintained both upstream (the last release was in December 2003) and 
in Debian (the current version dates back to May 2002). I suggest others 
consider doing the same.

Roger


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429808: php-pager: 2.4.3 available

[Thierry Randrianiriana]

Package: php-pager
Version: 2.4.2-2
Severity: wishlist

Pager 4.2.3 is available, it would be nice to be able to install it in unstable.
thanks

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20-1-vserver-686 (SMP w/1 CPU core)
Locale: LANG=mg_MG.UTF-8, LC_CTYPE=mg_MG.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426580: Subject: Re: Bug#426580: olsrd: new upstream release 0.5.0

[Kim Hawtin]

Hi Holger,

have you had time to look at this again, it would be great to get the
new release through apt,

cheers,

Kim


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429663: Oops, forgot the footnote...

[Conny Brunnkvist]

(I intended to include the URL of the daily snapshots: http:// 
mono.ximian.com/daily/)


//conny


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429809: ITP: python-sesame -- Python wrapper for Sesame's REST HTTP API

[Nacho Barrientos Arias]

Package: wnpp
Severity: wishlist
Owner: Nacho Barrientos Arias <[EMAIL PROTECTED]>

* Package name: python-sesame
  Version : 0.24
  Upstream Author : Tom Hoffman 

P Ike 
* URL : http://pysesame.projects.semwebcentral.org/
* License : GPL
  Programming Lang: Python
  Description : Python wrapper for Sesame's REST HTTP API

 Sesame is an open source RDF Schema-based storage and querying
 facility.
 .
 Now you can easily do the following from your Python script:
 .
  * Log in
  * Log out
  * Request a list of available repositories
  * Evaluate a SeRQL-select, RQL or RDQL query
  * Evaluate a SeRQL-construct query
  * Extract RDF from a repository
  * Uploading data to a repository
  * Add data from the web to a repository
  * Clear a repository
  * Remove statements
 .
  Homepage: http://pysesame.projects.semwebcentral.org/

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.18-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.ISO-8859-15, LC_CTYPE=en_GB.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#349952: gaim: Gaim is displaying wrong window name if you have tabs with Cyrlic names

[Emil Nowak]

Eduard Bloch wrote:

> please try using the a verdana font

I always had ttf font, and changing it to veranda doesn't help here. 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#429810: git-gui: the need for gitk is not documented

[Paul Wise]

Package: git-gui
Version: 1:1.5.2.2-1
Severity: normal

I ran git-gui and tried the visualise master command, which failed
because I didn't have gitk installed. I only noticed that because I had
run git-gui from a terminal and noticed this message:

Error in startup script: couldn't read file "/usr/bin/gitk": no such file or 
directory

Please do the following to fix this bug:

  * make git-gui complain with a GUI message box when gitk is not
found
  * add gitk to the suggests for git-gui
  * add something like this to the git-gui package description:
"Please install gitk to visualise git trees from git-gui"

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages git-gui depends on:
ii  git-core 1:1.5.2.2-1 fast, scalable, distributed revisi
ii  tk8.48.4.12-1Tk toolkit for Tcl and X11, v8.4 -

Versions of packages git-gui recommends:
ii  git-doc  1:1.5.2.2-1 fast, scalable, distributed revisi

-- 
bye,
pabs

http://wiki.debian.org/PaulWise


signature.asc
Description: This is a digitally signed message part

Bug#429811: /usr/sbin/update-alternatives: --all prompts the user to choose, even if there are zero choices.

[Tim Small]

Package: dpkg
Version: 1.13.25
Severity: normal
File: /usr/sbin/update-alternatives

There are 0 alternatives which provide `j2sdkreadme.desktop'.

  SelectionAlternative
  ---

  Press enter to keep the default[*], or type selection number:




-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.21-rc4
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)

Versions of packages dpkg depends on:
ii  coreutils   5.97-5.3 The GNU core utilities
ii  libc6   2.3.6.ds1-13 GNU C Library: Shared libraries

dpkg recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#251433: dovecot-common: Post sarge

[Nagy Gabor Peter]

Package: dovecot-common
Version: 1.0.rc15-2
Followup-For: Bug #251433

It's been almost two years.

We are post sarge. In the etch version this thing is also present.

I have just installed a security upgrade. I have upgraded libpq4. I
started to wonder why was it installed on the first place as I don't
have postgres installed.

It turns out dovecot depends on it.

Would it be very difficoult to change the package in a way that it uses
a library if it is installed, and doesn't use it if it is not installed?

And then you could move libpq, libsqlite, libmysqlclient to
suggested/recommended. libldap also, I suppose

And I wouldn't have to install security updates for software that I
never wanted to install.

Cheers,
Gabor

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages dovecot-common depends on:
ii  adduser  3.102   Add and remove users and groups
ii  libc62.3.6.ds1-13GNU C Library: Shared libraries
ii  libcomer 1.39+1.40-WIP-2006.11.14+dfsg-2 common error description library
ii  libkrb53 1.4.4-7etch1MIT Kerberos runtime libraries
ii  libldap2 2.1.30-13.3 OpenLDAP libraries
ii  libmysql 5.0.32-7etch1   mysql database client library
ii  libpam-r 0.79-4  Runtime support for the PAM librar
ii  libpam0g 0.79-4  Pluggable Authentication Modules l
ii  libpq4   8.1.9-0etch1PostgreSQL C client library
ii  libsqlit 3.3.8-1.1   SQLite 3 shared library
ii  libssl0. 0.9.8c-4SSL shared libraries
ii  openssl  0.9.8c-4Secure Socket Layer (SSL) binary a
ii  zlib1g   1:1.2.3-13  compression library - runtime

dovecot-common recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#368367: xserver-xorg: [dexconf] xorg.conf a zero file if keyboard detection failed at install

[Paul Slootman]

On Sat 16 Jun 2007, Brice Goglin wrote:
> 
> Did you recently reproduce this problem about xorg.conf being
> incorrectly generated when keyboard detection failed? Still get an empty
> xorg.conf? The submitter (Marc in CC:) didn't try recently. It would be
> good to know if it's working better with latest Xorg packages.

The last fresh install I did was a laptop recently, installing from
scratch with an etch netinst cd, and I don't recall getting any
questions about keyboard detection, it just worked. So I don't know
whether the bug may still be triggered under de circumstances described
in the bug report.


Paul Slootman


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426169: Separating several issues

[Frank Küster]

clone 426169 -1 -2
reassign -1 texlive-latex-extra
retitle -1 pstricks incompatibility in tableau.sty
reassign -2 texlive-latex-extra
retitle -2 no license and copyright information for tex/latex/tableaux/*
severity -2 serious
found -2 2005.dfsg.3-1
thanks

-- 
Frank Küster
Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich
Debian Developer (teTeX/TeXLive)

Bug#429610: ITP: gbrowse -- The Generic Genome Browser from GMOD

[Christian Perrier]

Quoting Charles Plessy ([EMAIL PROTECTED]):

A few words about the package's description


>   Description : The Generic Genome Browser from GMOD

I recommend avoiding leading articles in the short description. The same
stand for capitals unless a proper noun is used.

Therefore, I suggest something like "generic genome browser"

The 'from GMOD' could go to the long description as I don't see much
value added by it.

> 
>  The Generic Genome Browser is a combination of database and interactive Web

Here, as 'Generic Genome Browser' sounds like a
brand|official|registered name, I suggest using quotes.

>  page for manipulating and displaying annotations on genomes. Some of its
>  features:
>   * Simultaneous bird's eye and detailed views of the genome.

Enumeration items should end with semi-solons, except the last one.



signature.asc
Description: Digital signature

Bug#429815: avelsieve: [INTL:fr] French debconf templates translation

[Christian Perrier]

Package: avelsieve
Version: N/A
Severity: wishlist
Tags: patch l10n

Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.

Thanks for taking care of warning translators before uploading a new
version with string changes. It's highly appreciated.



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
# translation of avelsieve templates to French
# This file is distributed under the same license as the avelsieve package.
#
# Christian Perrier <[EMAIL PROTECTED]>, 2007.
msgid ""
msgstr ""
"Project-Id-Version: avelsieve\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-06-05 07:25+0200\n"
"PO-Revision-Date: 2007-06-08 07:10+0200\n"
"Last-Translator: Christian Perrier <[EMAIL PROTECTED]>\n"
"Language-Team: French <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#. Type: boolean
#. Description
#: ../templates:2001
msgid "Activate avelsieve automatically?"
msgstr "Faut-il activer Avelsieve automatiquement ?"

#. Type: boolean
#. Description
#: ../templates:2001
msgid ""
"Avelsieve will operate properly only if it has been activated by running "
"'squirrelmail-configure'. This can be done automatically now."
msgstr ""
"Avelsieve ne fonctionnera correctement que s'il a été activé avec la "
"commande « squirrelmail-configure ». Cette action peut prendre place "
"automatiquement maintenant."

#. Type: error
#. Description
#: ../templates:3001
msgid "No removal of installed sieve filters"
msgstr "Pas de suppression des filtres sieve installés"

#. Type: error
#. Description
#: ../templates:3001
msgid ""
"SquirrelMail users without access to sieveshell cannot remove filters they "
"created through avelsieve. Those filters are NOT removed even when avelsieve "
"is purged."
msgstr ""
"Les utilisateurs de SquirrelMail qui n'ont pas accès à « sieveshell » ne "
"peuvent pas supprimer les filtres créés avec Avelsieve. Ces filtres ne sont "
"PAS supprimés quand le paquet d'Avelsieve est purgé."

#. Type: error
#. Description
#: ../templates:3001
msgid ""
"The sieve filters for all mailboxes should be checked as soon as possible."
msgstr ""
"Il est recommandé de vérifier les filtres sieve de toutes les boîtes aux "
"lettres dès que possible."

Bug#429243: passwords stopped working, SSH stopped logging failures!

[Colin Watson]

# see explanation below
severity 429243 wishlist
retitle 429243 special syslogd configuration required in order to log messages 
from network child
thanks

On Sat, Jun 16, 2007 at 09:43:36AM -0400, Brandon Craig Rhodes wrote:
> Package: openssh-server
> Version: 1:4.6p1-1
> Severity: grave
> 
> The openssh-server "unstable" upgrade yesterday made sshd stop logging
> failures correcty to syslog.  If I successfully log in, then a message
> is correctly printed in /var/log/auth.log like these:
> 
> Jun 16 09:04:39 ten22 sshd[28070]: Accepted password for brandon from ... 
> port 49393 ssh2
> Jun 16 09:07:42 ten22 sshd[28496]: Accepted publickey for brandon from ... 
> port 38827 ssh2
> 
> But my many attempts to log in that resulted, on the client end, in
> the message:
> 
> Permission denied (publickey).
> 
> left absolutely *no* trace in the logs!  I verified that the SSH
> server was indeed answering these connections (and that they weren't
> getting routed to the wrong machine or anything) by stopping it,
> running it in debug mode (/usr/sbin/sshd -e -f) and then also under
> strace(1), and seeing that it was indeed receiving the connection and
> responding with a refusal to allow a connection.
> 
> Now: why was it refusing to let me log on with a password?  Password
> logins had been succeeding since the machine was installed long ago;
> what had changed?  Well, I am not sure whether SSH has changed or my
> config files (I will check my backups), but I did find the directive
> in /etc/ssh/sshd_config:
> 
> PasswordAuthentication no
> 
> How did that get there!?  And if it were there before, why was SSH
> letting me in?  I had better check my backups right now, because I
> guess that's an important question.  [Three minute pause.]  Well, how
> odd!  "PasswordAuthentication no" has been my setting for as long as I
> have been keeping backups, and yet SSH always permitted them!

This part of your bug report is certainly grave, and is bug #428968.
It wasn't PasswordAuthentication that was letting you log in with a
password before, but ChallengeResponseAuthentication, which I bet you
have commented out; the default was supposed to be yes, but wasn't
working properly. I'll have that fixed soon.

> Anyway, my real worry here - and the reason I have put "grave" as the
> severity level - is that login failures appear to no longer be sent to
> syslog, which seems a huge problem in the daemon that is protecting my
> system at its most fundamental level.  Though, I must admit, it does
> still seem to log failures *if* the method is password authentication;
> but its not logging public-key-based failures still seems worrisome
> enough to warrant immediate attention.

Most such failures are logged if you put 'LogLevel VERBOSE' in the
configuration file. Upstream appear to be happy with this state of
affairs.

There are some situations (mainly "postponed" authentications, I
believe; for instance, if you fail to provide a passphrase for your
public key at the client side so that the client has to abort the
authentication attempt, that winds up as a postponed authentication)
where log messages don't make it to syslog in the current Debian
configuration. http://bugzilla.mindrot.org/show_bug.cgi?id=906 discusses
this and notes that the system's syslogd should be configured to listen
on /dev/log in the network child's chroot (/var/run/sshd/dev/log in
Debian). This can be done by passing '-a /var/run/sshd/dev/log' to
syslogd (see /etc/default/syslogd), but something also needs to mkdir
/var/run/sshd/dev before syslogd starts in order to make this work.

Joey, is there any way that we could arrange to configure Debian's
syslogd such that it also listens on /var/run/sshd/dev/log if
openssh-server is installed? Perhaps somewhere that openssh-server could
drop a configuration file fragment ...

-- 
Colin Watson   [EMAIL PROTECTED]


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#219242: [Pkg-samba-maint] Bug#219242: Bug#219242: use of commun functions names

[Christian Perrier]

(Jerry CC'ed to ring a bell...:)

Quoting Julien Cristau ([EMAIL PROTECTED]):
> On Sat, Jun  9, 2007 at 00:46:33 -0700, Steve Langasek wrote:
> 
> > Otherwise, the patch looks sane to me, and I don't have any reason to
> > disagree with Julien's check for a compatible version of ld.
> > 
> > Julien, let me know if you prefer me to advocate this patch upstream.
> > 
> I finally sent it to samba-technical.


What I slightly dislike in upstream's way to track things down is that
they first encourage patches to be sent to -technical but not
necessarily to their BTS.

However, I would feel safer if we *also* report such stuff to samba's
bugzilla so that we can track it down more easily via the bts-link
feature.

Any objections?




signature.asc
Description: Digital signature

Bug#429429: [Pkg-samba-maint] Bug#429429: samba: nmbd not always necessary

[Christian Perrier]

> That's fair; I'd be happy to make a change like that, but letting users
> disable nmbd when the system isn't specifically configured for an AD-only
> environment sounds broken to me.


Hmm, well, there would be several uses of this and why not leave the
choice to our users anyway.

I'd vote for something in /etc/default/samba. Only manually
configurable (no debconf question). Default to run nmbd of course.





signature.asc
Description: Digital signature

Bug#428411: (no subject)

[Christian Perrier]

Quoting Uroš Golja ([EMAIL PROTECTED]):
> I am experiencing the same scenario on a amd64-based server.  


We now have debug versions of winbind in unstable.

Would you guys mind installing the samba-dbg packages and try tracking daown
winbindd's segfaults? I think that would make enough valuable
information for upstream.




signature.asc
Description: Digital signature

Bug#428411: [Pkg-samba-maint] Bug#428411: Acknowledgement (winbind: Winbind with idmap = rid segfaults when connecting from windows host)

[Christian Perrier]

Quoting Gregor Kronenberger ([EMAIL PROTECTED]):
> I have created a virtual machine that has an identical setup to my file
> server, though it uses a x86 instead of x64 CPU. Since I need access
> to the file server, I figured that it'd be easier if I just create a
> virtual machine for debugging purposes.
> 
> I tested that the 3.0.24-6+lenny3 version of Samba worked. Updating to
> 3.0.25a-1 produced the same error as previously described. I have
> attached a shortened version
> of the logfile (showing the last reboot as 3.0.24 and the boot as
> 3.0.25) and the smb.conf.


I'm not entirely sure that it would help but could you try installing
the samba-dbg package and launch winbindd in a gdb session?



signature.asc
Description: Digital signature

Bug#429626: exim4: [INTL:eu] Basque translation update

[Christian Perrier]

Quoting Piarres Beobide ([EMAIL PROTECTED]):
> Package: exim4
> Severity: wishlist
> Tags: patch l10n
> 
> 
> Hi
> 
> Atached exim4 debconf templates basque translation update, please commit it.


3 fuzzy remain after resyncing with current templates. COuld you
please make a final update?



eu.po
Description: application/gettext


signature.asc
Description: Digital signature

Bug#429767: samba: A Samba share named "share" is quietly invalid.

[Christian Perrier]

severity 429767 normal
thanks

Quoting Jesse Molina ([EMAIL PROTECTED]):
> Package: samba
> Version: 3.0.25a-2
> Severity: important
> 

Please don't overflate bug severities.


> 
> If a share is named share, as given in the example below, it doesn't work!  
> Debugging isn't helpful and testparm says it's valid.
> 
> Simply renaming the share to anything else, such as myshare, ashare, or 
> arrggg-whered-my-share-go, are valid.
> 
> 
> 
> [share]
> comment = Common File Share
> path = /var/local/smb/share


Well, posting the *entire* smb.conf file might help.

Anyway, with *my* setup, everything works as expected.

smb.conf:

[global]
   load printers = no
   workgroup =  DRIS
   security =  user
   map to guest = Bad User   
   printing = cups


[homes]
directory mask=0700
browseable=no
comment=Home Directories
read only=no
create mask=0770

[share]
directory mask=0700
browseable=yes
comment=Public
read only=no
create mask=0770
public=yes
path=/var/tmp/samba-test



Result:

[EMAIL PROTECTED]:~/travail/debian/talks/debconf7> smbclient //localhost/share
Password:
Domain=[MYKERINOS] OS=[Unix] Server=[Samba 3.0.25a]
smb: \> dir
  .   D0  Fri Jun 15 17:11:28 2007
  ..  D0  Fri Jun 15 05:33:17 2007
  foo   1349  Fri May 25 07:02:20 2007
  bar D0  Fri May 25 07:02:29 2007
  foo2A4  Fri Jun 15 17:02:22 2007
  creeA   30  Fri Jun 15 17:10:58 2007
  cree2   A   29  Fri Jun 15 17:11:16 2007
  acecntué   A4  Fri Jun 15 17:11:28 2007

60675 blocks of size 32768. 8728 blocks available


So, well, I'm afraid the problem needs more investigation and details
on your sire.




signature.asc
Description: Digital signature

Bug#429814: net-snmp: [l10n:fr] French translation corrected

[Christian Perrier]

Package: net-snmp
Severity: wishlist
Tags: patch l10n

A few errors were discovered in the French translation of the debconf
templates which was provided as part of the general review of the templates.

Please use that file instead of the one I provided in the tarball.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
# This file is distributed under the same license as the net-snmp package.
#
# Copyright (C) 2006, Cédric Favry <[EMAIL PROTECTED]>
# Christian Perrier <[EMAIL PROTECTED]>, 2007.
msgid ""
msgstr ""
"Project-Id-Version: fr\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-05-31 07:40+0200\n"
"PO-Revision-Date: 2007-06-15 07:27+0200\n"
"Last-Translator: Christian Perrier <[EMAIL PROTECTED]>\n"
"Language-Team: French <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#. Type: note
#. Description
#: ../snmpd.templates:3001
msgid "Default parameters changed since version 5.2.1"
msgstr "Changement des paramètres par défaut dans la version 5.2.1"

#. Type: note
#. Description
#: ../snmpd.templates:3001
msgid ""
"The default start parameters of the snmpd agent/daemon have been changed."
msgstr "Les paramètres par défaut du démarrage de l'agent SNMP snmpd ont été 
modifiés."

#. Type: note
#. Description
#: ../snmpd.templates:3001
#| msgid ""
#| "Debian has changed the default start parameters of the snmpd agent/"
#| "daemon. The daemon is now started as user snmp, binds to localhost only "
#| "and SMUX support is disabled. These parameters can all be individually "
#| "changed in /etc/default/snmpd. Please see /usr/share/doc/snmpd/NEWS."
#| "Debian.gz for more details."
msgid ""
"The daemon is now started as user snmp, binds to localhost only and runs "
"with SNMP multiplexing (SMUX) support disabled. These parameters can all be "
"individually changed in /etc/default/snmpd."
msgstr ""
"Le serveur est dorénavant démarré avec les privilèges de l'utilisateur "
"« snmp ». Il n'écoute que sur l'adresse de « localhost » et la gestion du "
"multiplexage SNMP (SMUX) est désactivée. Ces paramètres peuvent tous être "
"changés individuellement dans /etc/default/snmpd."

#. Type: note
#. Description
#: ../snmpd.templates:3001
msgid "Please see /usr/share/doc/snmpd/NEWS.Debian.gz for more details."
msgstr ""
"Veuillez lire le fichier /usr/share/doc/snmpd/NEWS.Debian.gz pour plus "
"d'informations."

Bug#429626: exim4: [INTL:eu] Basque translation update

[pi]

Christian Perrier-(e)k esan zuen:
> Quoting Piarres Beobide ([EMAIL PROTECTED]):
> > Package: exim4
> > Severity: wishlist
> > Tags: patch l10n
> > 
> > 
> > Hi
> > 
> > Atached exim4 debconf templates basque translation update, please commit it.
> 
> 
> 3 fuzzy remain after resyncing with current templates. COuld you
> please make a final update?
> 

Atached new (an I hope) final update, thanks for all you atention.

thx



-- 
Piarres Beobide
# translation of exim4-eu.po to Euskara
#
#Translators, if you are not familiar with the PO format, gettext
#documentation is worth reading, especially sections dedicated to
#this format, e.g. by running:
# info -n '(gettext)PO Files'
# info -n '(gettext)Header Entry'
#Some information specific to po-debconf are available at
#/usr/share/doc/po-debconf/README-trans
# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
#Developers do not need to manually edit POT or PO files.
#
# Piarres Beobide Egana <[EMAIL PROTECTED]>, 2004, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: exim4-eu\n"
"Report-Msgid-Bugs-To: [EMAIL PROTECTED]"
"POT-Creation-Date: 2007-06-12 08:53+0200\n"
"PO-Revision-Date: 2007-06-19 09:45+0200\n"
"Last-Translator: Piarres Beobide <[EMAIL PROTECTED]>\n"
"Language-Team: Euskara <[EMAIL PROTECTED]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Pootle 0.11\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid "Remove undelivered messages in spool directory?"
msgstr "Ezabatu bidaligabeko hilara direktorioko ePostak?"

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid ""
"There are e-mail messages in the Exim spool directory /var/spool/exim4/"
"input/ which have not yet been delivered. Removing Exim will cause them to "
"remain undelivered until Exim is re-installed."
msgstr ""
"Oraindik bidali ez diren ePostak daude /var/spool/exim4/input exim hilara "
"direktorioan. Exim ezabatzeak hauek exim berriz instalatu arte bidali gabe "
"geratzea eragingo du."

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid ""
"If this option is not chosen, the spool directory is kept, allowing the "
"messages in the queue to be delivered at a later date after Exim is re-"
"installed."
msgstr ""
"Aukera hau ez hautatu ezkero, ilara direktorioa mantendu egingo da, mezu "
"ilara beranduago exim instalatzen denean bidaltzeko aukera emanez."

#. Type: error
#. Description
#: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
#: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
msgid "Reconfigure exim4-config instead of this package"
msgstr "Exim4-config birkonfiguratu pakete honen beharrean"

#. Type: error
#. Description
#: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
#: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
msgid ""
"Exim4 has its configuration factored out into a dedicated package, exim4-"
"config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'."
msgstr ""
"Exim4-ek bere konfigurazio beste pakete batetan du, exim4-config. Exim4 "
"birkonfiguratu nahi izan ezkero \"dpkg-reconfigure exim4-config\" erabili."

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "internet site; mail is sent and received directly using SMTP"
msgstr "Internet gunea; eposta SMTP erabiliaz jaso eta bidaltzen da"

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "mail sent by smarthost; received via SMTP or fetchmail"
msgstr "ePosta smarthost-ak bidalia; SMTP edo fetchmail bidez jasoa"

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "mail sent by smarthost; no local mail"
msgstr "ePosta smarthost-ak bidalia; ez dago posta lokalik"

#. Type: select
#. Choices
#. Translators beware! the following six string

Bug#428908: ["José Manuel Pérez" <[EMAIL PROTECTED]>] Bug#428908: Problem whit the installation of auctex on testing

[Frank Küster]

severity 428908 serious

"Davide G. M. Salvetti" <[EMAIL PROTECTED]> wrote:

>>From the bug submitter.

>configure: error: LaTeX not found, aborting!
>You must install LaTeX for preview to work.
>
>so, i decided to purge all about emacs and install firts :
>
>apt-get install texlive.

I think we've already discussed this in some older bugreport.  I repeat
from memory:

- auctex needs to Depend on a package which provides the latex format,
  i.e. texlive-latex-base, hence the severity serious

- preview-latex-style only depends on texlive-base, which makes sense
  because you can also use it with plain TeX or ConTeXt.  But I suggest
  that it should Recommend texlive-latex-base

- please please drop all references to tetex-*.  In particular,
  tetex-base is now an empty package which depends on nothing.

Regards, Frank
-- 
Frank Küster
Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich
Debian Developer (teTeX/TeXLive)