Re: Network/Settings (ou l'applet network-manager) fait disparaître la connexion bridge créée si on la désactive
Je regarde ça (fork/PR). J'ai posé la question sur networkmanager-l...@gnome.org et j'ai eu une première réaction qui m'invite à corriger la chose. En même temps, gérer une connexion bridge avec le GUI (gnome-control-center network et nm-applet) n'est pas une chose ordinaire visiblement. Ça n'est pas si exotique que ça (sur une machine MS, j'ai le souvenir ancien de créer des connexions bridge et de les utiliser simplement par le GUI). - Original Message - > From: "Fabien R" > To: debian-user-french@lists.debian.org > Sent: Tuesday, August 20, 2019 8:24:11 AM > Subject: Re: Network/Settings (ou l'applet network-manager) fait disparaître > la connexion bridge créée si on la > désactive > > On 19/08/2019 18:59, roger.tar...@free.fr wrote: > > le code est là : > > https://github.com/GNOME/gnome-control-center/tree/gnome-3-30 > > https://github.com/GNOME/gnome-control-center/tree/gnome-3-30/panels/network > Tu peux publier ton problème dans "issue" pour commencer. > > > > J'aimerais essayer la 3.32 qui est disponible pour voir si le > > problème perdure. > > Comment faire ça proprement et de manière réversible sans casser > > mon système Debian Buster tout neuf ? > > Jene fais jamais ça d'habitude. > Tu ne peux pas le desinstaller ? > > > > Ensuite, je peux essayer de voir ce que je comprends dans le code > > (C) et effectuer des modifications mineures. > > S'il faut appréhender tout le code de network, ça va être plus > > complexe. > > As-tu une idée de par quel bout commencer ? > Il y a un début à tout. > Tu fais un fork. > > -- > Fabien > >
Re: Network/Settings (ou l'applet network-manager) fait disparaître la connexion bridge créée si on la désactive
On 19/08/2019 18:59, roger.tar...@free.fr wrote: > le code est là : > https://github.com/GNOME/gnome-control-center/tree/gnome-3-30 > https://github.com/GNOME/gnome-control-center/tree/gnome-3-30/panels/network Tu peux publier ton problème dans "issue" pour commencer. > > J'aimerais essayer la 3.32 qui est disponible pour voir si le problème > perdure. > Comment faire ça proprement et de manière réversible sans casser mon système > Debian Buster tout neuf ? > Jene fais jamais ça d'habitude. Tu ne peux pas le desinstaller ? > > Ensuite, je peux essayer de voir ce que je comprends dans le code (C) et > effectuer des modifications mineures. > S'il faut appréhender tout le code de network, ça va être plus complexe. > As-tu une idée de par quel bout commencer ? Il y a un début à tout. Tu fais un fork. -- Fabien
Re: Network/Settings (ou l'applet network-manager) fait disparaître la connexion bridge créée si on la désactive
- Original Message - > From: "Fabien R" > To: debian-user-french@lists.debian.org > Sent: Monday, August 19, 2019 8:36:38 AM > Subject: Re: Network/Settings (ou l'applet network-manager) fait disparaître > la connexion bridge créée si on la > désactive > > On 19/08/2019 01:46, roger.tar...@free.fr wrote: > > Quant à analyser et corriger le code, pourquoi pas, mais c'est une > > autre aventure. > > Est-ce jouable selon vous ? > C'est le principe même du libre. > Si une fonctionnalité manque ou un bug te bloque de façon critique... > > -- > Fabien > > Oui. C'est intéressant. Peux-tu me guider ? C'est le code qui présente un GUI avec des boutons à glissière (image jointe). J'ai identifié que lancer Settings/Network crée le processus "gnome-control-center network" $ ps -aux | grep 'gnome' ... 0 S test 18606 1327 4 80 0 - 165664 x64_sy 18:39 tty200:00:00 gnome-control-center network $ dpkg-query -l gnome-control-center +++---- ii gnome-control-center 1:3.30.3-1 amd64utilities to configure the GNOME desktop le code est là : https://github.com/GNOME/gnome-control-center/tree/gnome-3-30 https://github.com/GNOME/gnome-control-center/tree/gnome-3-30/panels/network J'aimerais essayer la 3.32 qui est disponible pour voir si le problème perdure. Comment faire ça proprement et de manière réversible sans casser mon système Debian Buster tout neuf ? Jene fais jamais ça d'habitude. Ensuite, je peux essayer de voir ce que je comprends dans le code (C) et effectuer des modifications mineures. S'il faut appréhender tout le code de network, ça va être plus complexe. As-tu une idée de par quel bout commencer ? Merci.
Re: Network/Settings (ou l'applet network-manager) fait disparaître la connexion bridge créée si on la désactive
On 19/08/2019 01:46, roger.tar...@free.fr wrote: > Quant à analyser et corriger le code, pourquoi pas, mais c'est une autre > aventure. > Est-ce jouable selon vous ? C'est le principe même du libre. Si une fonctionnalité manque ou un bug te bloque de façon critique... -- Fabien
Re: Network/Settings (ou l'applet network-manager) fait disparaître la connexion bridge créée si on la désactive
Comment faire pour savoir si ce comportement avec une connexion bridge est intentionnel ? Faut-il le déclarer aux personnes de Debian ou à celles de network-manager ? (je n'ai aucune expérience pour remonter ce genre de problème). Quant à analyser et corriger le code, pourquoi pas, mais c'est une autre aventure. Est-ce jouable selon vous ? - Original Message - > From: "roger tarani" > To: "Liste Debian" > Sent: Saturday, August 17, 2019 4:29:35 PM > Subject: Network/Settings (ou l'applet network-manager) fait > disparaître la connexion bridge créée si on la désactive > Bonjour > Sur une machine en Buster où NM est installé, je crée un bridge (avec > nm-connection-editor ou nmcli, c'est pareil). > Tout se passe bien : je crée le bridge, je l'active (up), je supprime > l'ancienne connection "wired1" qui donnait accès à internet. La > machine accède toujours à internet par le bridge. > $ nmcli connection show > NAME UUID TYPE DEVICE > br0 f8cc5703-e3ba-4afb-b7e6-75fd995cee16 bridge br0 > bridge-slave-enp0s25 cef1a1ae-2d51-46b5-aa9d-81227a8c9be3 ethernet > enp0s25 > (tout est en vert) > Network/Settings affiche bien la connexion créée (voir photos). > Il y a un seul PROBLEME que je n'arrive pas à résoudre : > si je désactive la connexion (bridge-slave-enp0s25) avec le bouton > glissière, elle disparaît, et la machine ne peut plus accéder au > réseau internet. > En fait, cela revient à faire 'nmcli connection down > bridge-slave-enp0s25' : > $ nmcli connection show > NAME UUID TYPE DEVICE > br0 f8cc5703-e3ba-4afb-b7e6-75fd995cee16 bridge br0 > bridge-slave-enp0s25 cef1a1ae-2d51-46b5-aa9d-81227a8c9be3 ethernet -- > (bridge-slave-enp0s25 est passé en blanc) > J'ai trouvé deux moyens pour réactiver le bridge : > - soit redémarrer le service NetworkManager ( $ sudo systemctl > restart NetworkManager.service ) > - soit activer à nouveau la connexion bridge-slave-enp0s25 ( $ nmcli > connection up bridge-slave-enp0s25) > Network/Settings affiche à nouveau la connexion bridge. > Connaissez-vous un moyen de corriger ou de contourner cela ? > cad de permettre à Network/Settings de conserver la connexion bridge, > au lieu de la faire disparaître, pour que je puisse simplement la > réactiver. > J'ai un peu ratissé les forums sans trouver de solution. > Egalement, indépendamment de tout ça, après un démarrage de la > machine, nm-applet affiche l'icone normale "connexion à un réseau" > (trois petits ordi en réseau). Si je redémarre le service > NetworkManager, l'icone "réseau défaillant" la remplace (voir > photo). > Je n'ai trouvé que le redémarrage de la machine pour retrouver une > icône conforme à l'état du réseau. > J'ai trouvé ce lien : > https://wiki.archlinux.org/index.php/NetworkManager#nm-applet_tray_icons_display_wrongly > qui pointe vers ce lien de 09/2018 GtkTrayIcon has no background on > X11 : https://gitlab.gnome.org/GNOME/gtk/issues/1280 > Sinon, je vais essayer systemd-networkd. Mais je ne crois pas qu'il y > ait d'applet et d'icône. > Merci.
Network/Settings (ou l'applet network-manager) fait disparaître la connexion bridge créée si on la désactive
Bonjour Sur une machine en Buster où NM est installé, je crée un bridge (avec nm-connection-editor ou nmcli, c'est pareil). Tout se passe bien : je crée le bridge, je l'active (up), je supprime l'ancienne connection "wired1" qui donnait accès à internet. La machine accède toujours à internet par le bridge. $ nmcli connection show NAME UUID TYPE DEVICE br0 f8cc5703-e3ba-4afb-b7e6-75fd995cee16 bridge br0 bridge-slave-enp0s25 cef1a1ae-2d51-46b5-aa9d-81227a8c9be3 ethernet enp0s25 (tout est en vert) Network/Settings affiche bien la connexion créée (voir photos). Il y a un seul PROBLEME que je n'arrive pas à résoudre : si je désactive la connexion (bridge-slave-enp0s25) avec le bouton glissière, elle disparaît, et la machine ne peut plus accéder au réseau internet. En fait, cela revient à faire 'nmcli connection down bridge-slave-enp0s25' : $ nmcli connection show NAME UUID TYPE DEVICE br0 f8cc5703-e3ba-4afb-b7e6-75fd995cee16 bridge br0 bridge-slave-enp0s25 cef1a1ae-2d51-46b5-aa9d-81227a8c9be3 ethernet -- (bridge-slave-enp0s25 est passé en blanc) J'ai trouvé deux moyens pour réactiver le bridge : - soit redémarrer le service NetworkManager ( $ sudo systemctl restart NetworkManager.service ) - soit activer à nouveau la connexion bridge-slave-enp0s25 ( $ nmcli connection up bridge-slave-enp0s25) Network/Settings affiche à nouveau la connexion bridge. Connaissez-vous un moyen de corriger ou de contourner cela ? cad de permettre à Network/Settings de conserver la connexion bridge, au lieu de la faire disparaître, pour que je puisse simplement la réactiver. J'ai un peu ratissé les forums sans trouver de solution. Egalement, indépendamment de tout ça, après un démarrage de la machine, nm-applet affiche l'icone normale "connexion à un réseau" (trois petits ordi en réseau). Si je redémarre le service NetworkManager, l'icone "réseau défaillant" la remplace (voir photo). Je n'ai trouvé que le redémarrage de la machine pour retrouver une icône conforme à l'état du réseau. J'ai trouvé ce lien : https://wiki.archlinux.org/index.php/NetworkManager#nm-applet_tray_icons_display_wrongly qui pointe vers ce lien de 09/2018 GtkTrayIcon has no background on X11 : https://gitlab.gnome.org/GNOME/gtk/issues/1280 Sinon, je vais essayer systemd-networkd. Mais je ne crois pas qu'il y ait d'applet et d'icône. Merci.
Network settings on gnome-control-center
Hello All, I'm experiencing a problem on Debian 8 and the network settings using gnome-control-center, i.e. the applications that starts when we click on the upper right corner icon. I alternated the settings of my network configuration between the command line and the gnome app and now I have a routing instruction that is always shown in the app but it does not appear in the editing field. The setting is applied on exit. It looks like the app parameters are stored somewhere (?) but I cannot understand where. Can somebody helps ? Thanks. -- *Fabrizio*
Re: Network settings on gnome-control-center
On Tue, 2015-12-15 at 19:16 +0100, Fabrizio Carrai wrote: > Hello All, > I'm experiencing a problem on Debian 8 and the network settings using > gnome-control-center, i.e. the applications that starts when we click > on > the upper right corner icon. > > I alternated the settings of my network configuration between the > command > line and the gnome app and now I have a routing instruction that is > always > shown in the app but it does not appear in the editing field. The > setting > is applied on exit. It looks like the app parameters are stored > somewhere > (?) but I cannot understand where. Can somebody helps ? Not sure if I understand you correctly. But if you changed your network configuration with something besides NM with the command line (not using nmcli) you'll probably have problems. Either use NM, something similar, or set up the network manually. If I misunderstood you the settings for NM connections are in /etc/NetworkManager/system-connections HTH, -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5 signature.asc Description: This is a digitally signed message part
Re: gnome: cannot use the applets (power, network settings, etc)
On 10/04/2014 11:35 AM, H.S. wrote: Folks, Since a few months now, I have not been able to use some settings from the applets (top right corner of screen, gnome). The log off button works, but reboot/shutdown doesn't. I am also not able to configure my wired network connection from the applet. Any change I make does not stick. Suspiciously seems like a permissions issue, but I can't track it down. It used to work smoothly earlier. SNIP Suggestions on how to go about debugging and fixing this issue? Thanks. Turns out had to install systemd (what is new stuff anyway?) to make auto mounting work. Still working on other issues. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/m2j271$ggp$1...@ger.gmane.org
gnome: cannot use the applets (power, network settings, etc)
Folks, Since a few months now, I have not been able to use some settings from the applets (top right corner of screen, gnome). The log off button works, but reboot/shutdown doesn't. I am also not able to configure my wired network connection from the applet. Any change I make does not stick. Suspiciously seems like a permissions issue, but I can't track it down. It used to work smoothly earlier. Running Debian Testing. This is what I have: ~$ dpkg -l network-m* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name VersionArchitecture Description +++-==-==-==-= ii network-manager0.9.10.0-2 amd64 network management framework (daemon and userspace tools) ii network-manager-gnome 0.9.10.0-2 amd64 network management framework (GNOME frontend) un network-manager-kdenone none (no description available) ii network-manager-openconnec 0.9.10.0-1 amd64 network management framework (OpenConnect plugin) ii network-manager-openconnec 0.9.10.0-1 amd64 network management framework (OpenConnect plugin GNOME GU ii network-manager-openvpn0.9.10.0-1 amd64 network management framework (OpenVPN plugin core) ii network-manager-openvpn-gn 0.9.10.0-1 amd64 network management framework (OpenVPN plugin GNOME GUI) ii network-manager-pptp 0.9.10.0-1 amd64 network management framework (PPTP plugin core) ii network-manager-pptp-gnome 0.9.10.0-1 amd64 network management framework (PPTP plugin GNOME GUI) ii network-manager-vpnc 0.9.10.0-1 amd64 network management framework (VPNC plugin core) ii network-manager-vpnc-gnome 0.9.10.0-1 amd64 network management framework (VPNC plugin GNOME GUI) Suggestions on how to go about debugging and fixing this issue? Thanks. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/m0p44t$uq0$1...@ger.gmane.org
Getting network settings to stick
Greetings I have put Debian Etch on my laptop. Somewhere during the course of the install the IP address I assigned didn't stick. I have used the ifconfig command in an attempt to set it but the system doesn't retain it between boot ups. I have also looked at the file in the /etc/network directory but it has the address set in there. How can I get the system to retain the desired IP address? Any pointers and comments will be appreciated. Walt This message was sent using IMP, the Internet Messaging Program. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting network settings to stick
[EMAIL PROTECTED] wrote: I have put Debian Etch on my laptop. Somewhere during the course of the install the IP address I assigned didn't stick. I have used the ifconfig command in an attempt to set it but the system doesn't retain it between boot ups. I have also looked at the file in the /etc/network directory but it has the address set in there. How can I get the system to retain the desired IP address? *Which* file in /etc/network? You might want to post the contents of /etc/network/interfaces for us to look at. (Feel free to obscure any actual IP addresses if you'd like.) -- Kent West http://kentwest.blogspot.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting network settings to stick
On Mon, Jun 9, 2008 at 9:16 PM, [EMAIL PROTECTED] wrote: Greetings I have put Debian Etch on my laptop. Somewhere during the course of the install the IP address I assigned didn't stick. I have used the ifconfig command in an attempt to set it but the system doesn't retain it between boot ups. I have also looked at the file in the /etc/network directory but it has the address set in there. How can I get the system to retain the desired IP address? Any pointers and comments will be appreciated. http://www.debian.org/doc/manuals/reference/ch-gateway.en.html#fr55 James. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting network settings to stick
Ooops! sorry. There is only one file in my /etc/network directory. It's called interface and goes as follows: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.0.5 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.0.1 dns-search williams_home_network.lan It was my impression that this is where the system obtained its IP address. I am not in the know on networking issues, but I am eager the learn. Any pointers will be appreciated. -- Best Regards Walt L. Williams http://www.intergate.com/~waltwilliams/ On Monday, 09 June 2008 8:54 pm, Kent West wrote: [EMAIL PROTECTED] wrote: I have put Debian Etch on my laptop. Somewhere during the course of the install the IP address I assigned didn't stick. I have used the ifconfig command in an attempt to set it but the system doesn't retain it between boot ups. I have also looked at the file in the /etc/network directory but it has the address set in there. How can I get the system to retain the desired IP address? *Which* file in /etc/network? You might want to post the contents of /etc/network/interfaces for us to look at. (Feel free to obscure any actual IP addresses if you'd like.) -- Kent West http://kentwest.blogspot.com . -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting network settings to stick
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 06/09/08 18:54, Walt L. Williams wrote: Ooops! sorry. There is only one file in my /etc/network directory. It's called interface and goes as follows: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 You don't need this. iface eth0 inet static address 192.168.0.5 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.0.1 dns-search williams_home_network.lan It was my impression that this is where the system obtained its IP address. Yes, it is. I am not in the know on networking issues, but I am eager the learn. Any pointers will be appreciated. - -- Ron Johnson, Jr. Jefferson LA USA Kittens give Morbo gas. In lighter news, the city of New New York is doomed. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFITcfqS9HxQb37XmcRAgMQAKCQz0CI1L3jgRzkFVxU2dQOhkbe7wCcDRzx a4Q58tcOyRDSPktEQ7uT7Rk= =YA4n -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting network settings to stick
Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 06/09/08 18:54, Walt L. Williams wrote: Ooops! sorry. There is only one file in my /etc/network directory. It's called interface and goes as follows: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 You don't need this. Or more specifically, this line (allow-hotplug eth0) allows the first wired ethernet card (eth0) to be recognized as being plugged into an ethernet connection or not. As I understand it, this allows you to move your system from one wired Ethernet jack in one LAN (say in Building 4, Room 103) into another jack on another LAN (say in Building 27, Room 212), without manually restarting your network. It's really only useful for laptops. In my experience, it doesn't work very well, so I remove this line, and replace it with the line auto eth0, which causes the interface to automatically connect only when the /etc/init.d/networking script is run with start or restart. What makes you think the settings don't stick? Are you getting no IP address, or a different IP address, or what? If you're getting no IP address, I suspect it's the allow-hotplug eth0 line, as Ron suggests. iface eth0 inet static address 192.168.0.5 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.0.1 dns-search williams_home_network.lan -- Kent West Westing Peacefully - http://kentwest.blogspot.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting network settings to stick
On Tuesday 10 June 2008 09:25:12 Kent West wrote: Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 06/09/08 18:54, Walt L. Williams wrote: Ooops! sorry. There is only one file in my /etc/network directory. It's called interface and goes as follows: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 You don't need this. Or more specifically, this line (allow-hotplug eth0) allows the first wired ethernet card (eth0) to be recognized as being plugged into an ethernet connection or not. As I understand it, this allows you to move your system from one wired Ethernet jack in one LAN (say in Building 4, Room 103) into another jack on another LAN (say in Building 27, Room 212), without manually restarting your network. It's really only useful for laptops. In my experience, it doesn't work very well, so I remove this line, and replace it with the line auto eth0, which causes the interface to automatically connect only when the /etc/init.d/networking script is run with start or restart. What makes you think the settings don't stick? Are you getting no IP address, or a different IP address, or what? If you're getting no IP address, I suspect it's the allow-hotplug eth0 line, as Ron suggests. iface eth0 inet static address 192.168.0.5 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.0.1 dns-search williams_home_network.lan -- Kent West Westing Peacefully - http://kentwest.blogspot.com Do you have NetworkManager up and running in that laptop ? I've seen the behavior you describe happening with NetworkManager obtaining IPs from a DHCP server in the network ignoring the settings in /etc/network/interfaces when allow-hotplug eth0 is used along with NetworkManager. Mihira. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Re: Network settings don't stick after reboot
linux.debian.user is a moderated newsgroup in gateway with a mailing list. Your article has been examined by the automatic moderation program and has been refused because: this hierarchy accepts posts only from registered users. You can register for posting by subscribing to the [EMAIL PROTECTED] mailing list. You can do so by sending a message with subscribe in the body at the [EMAIL PROTECTED] address or by visiting http://lists.bofh.it/listinfo/linux-gate . For more information about the linux.* hierarchy please read the FAQ at http://www.linux.it/~md/linux-faq Virtually your, The Moderation Robot. --- Follows the first few lines of your article From: Wayne Topa [EMAIL PROTECTED] Newsgroups: linux.debian.user Subject: Re: Network settings don't stick after reboot Date: Thu, 27 Sep 2007 03:40:10 +0200 Message-ID: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Old-Return-Path: [EMAIL PROTECTED] Reply-To: debian-user@lists.debian.org Mail-Followup-To: debian-user@lists.debian.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Organization: Organized? Who me? User-Agent: Mutt/1.5.16 (2007-06-11) X-Scanned-By: MIMEDefang 2.56 on 216.139.64.8 X-Virus-Scanned: at lists.debian.org with policy bank en-ht X-Rc-Virus: 2007-09-13_01 X-Rc-Spam: 2007-05-24_01 X-Mailing-List: debian-user@lists.debian.org archive/latest/498730 List-ID: debian-user.lists.debian.org X-Original-Date: Wed, 26 Sep 2007 21:39:39 -0400 X-Original-Message-ID: [EMAIL PROTECTED] X-Original-References: [EMAIL PROTECTED] Bytes: 2762 X-Received-Date: Thu, 27 Sep 2007 01:40:17 GMT (bgtnsc05-news.ops.worldnet.att.net) X-Complaints-To: [EMAIL PROTECTED] X-Trace: a5ab646fed767ef7b7d1a22875 To: debian-user@lists.debian.org Sender: [EMAIL PROTECTED] Logan Five([EMAIL PROTECTED]) is reported to have said: I have the latest version of Debian running on Linksys NSLU. I have it set for a static IP and I've added a correct default gateway to my config and everything works ok. How/where did you set the static IP? However, when I reboot, it goes back to DHCP and the gateway route doesn't stick. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Network settings don't stick after reboot
I have the latest version of Debian running on Linksys NSLU. I have it set for a static IP and I've added a correct default gateway to my config and everything works ok. However, when I reboot, it goes back to DHCP and the gateway route doesn't stick. All the correct settings in the correct files but those settings don't get read on reboot apparently. And if I do a restart of networking, the correct settings get applied. What gives? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Network settings don't stick after reboot
Logan Five([EMAIL PROTECTED]) is reported to have said: I have the latest version of Debian running on Linksys NSLU. I have it set for a static IP and I've added a correct default gateway to my config and everything works ok. How/where did you set the static IP? However, when I reboot, it goes back to DHCP and the gateway route doesn't stick. Have you configured the DHCP server with the slugs IP. If not, DHCP will not know that the slug's IP has been set. man 5 dhcpd.conf see the examples for static leases. All the correct settings in the correct files but those settings don't get read on reboot apparently. On the Slug or server? If the dhcpd.conf setting are correct on the server then it should assing the slug the IP you set it at And if I do a restart of networking, the correct settings get applied. What gives? Thanks. What correct setting on what, the slug? You might want to take a deep breath and try giving us a better idea of what you mean. Wayne -- Information Center, n.: A room staffed by professional computer people whose job it is to tell you why you cannot have the information you require. ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Network settings don't stick after reboot
Wayne Topa linuxone at intergate.com writes: What correct setting on what, the slug? The static IP settings are in /etc/network/interfaces. The slug actually is my DHCP server and is running DNSMASQ for that. The IP that it comes up with is within range, but is an old one I used to have assigned to it which makes me curious. I don't see why I would have to reserve an address for it. Shouldn't Debian boot with the settings I specify regardless of what the DHCP server says (in this case itself)? There are no conflicts with other devices on the network. And when I check the leases file during the time that the erroneous settings are applied, there is no listing for the address the slug got. This tells me that it may be reverting to its old static settings and not getting it from DHCP. The interfaces setup is here: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1 broadcast 192.168.1.255 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Network settings don't stick after reboot
On 09/26/2007 06:51 PM, Logan Five wrote: I have the latest version of Debian running on Linksys NSLU. I have it set for a static IP and I've added a correct default gateway to my config and everything works ok. However, when I reboot, it goes back to DHCP and the gateway route doesn't stick. All the correct settings in the correct files but those settings don't get read on reboot apparently. And if I do a restart of networking, the correct settings get applied. What gives? Thanks. Please post /etc/network/interfaces -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Network settings don't stick after reboot
Mumia W.. paduille.4061.mumia.w+nospam at earthlink.net writes: Please post /etc/network/interfaces I did above in response to somebody else. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Network settings don't stick after reboot
Logan Five logan5 at pobox.com writes: Ok, I found it. Someone writing me directly in email pointed me to the right place. I had a setting in rc.local that set the static IP. Now I remember getting a tip to do that on a web posting somewhere. But I think it was a generic tip and not one geared directly towards Debian so probably not the best way to go about it. Everything works great now! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: APT Proxy/Network Settings mit testing Version
On Sun, 7 May 2006 18:57:15 +0200 Richard Mittendorfer [EMAIL PROTECTED] wrote: Also sprach Tomash Boy [EMAIL PROTECTED] (Sun, 7 May 2006 18:50:08 +0200 (CEST)): Hallo, Hey, bitte umbreche die Zeilen bei etwa 72 Zeichen, thx. hierfür muss ich mich entschuldigen, auch wenn der Umbruch eingestellt ist macht sylpheed das aus mir nicht erklärlichen Gründen nicht, sorry nochmal. ich habe von sarge auf testing upgegraded und seitdem nutzt apt den HTTP Proxy von meinem LinuxServer. Leider finde ich nirgends die Option das ein/auszuschalten ich habe keine apt.conf sowie auch keine preferences in /etc/apt sondern nur den Eintrag in folgender Datei # cat /etc/apt/apt.conf.d/70debconf // Pre-configure all packages with debconf before they are installed. // If you don't like it, comment it out. DPkg::Pre-Install-Pkgs {/usr/sbin/dpkg-preconfigure --apt || true;}; Dieses hat nichts mit irgendwelchen Netzwerk-Einstellungen für apt zu tun ! Ich hoffe jemand hat ein Idee woran das liegen kann in den Howtos oder FAQs finde ich nichts eindeutiges hierzu. Hast du eine Umgebungvariable fuer einen Proxy gesetzt? (allerdings k.A. ob apt darauf anspricht) ja, diese ist gesetzt und noch wegnahme funktioniert es auch einwandfrei . Danke Weiterhin fehlt nun apt-setup gibt es hier ein neues Tool, um die sourcen automatisch in sources.list einzubinden ? vim? emacs? ... schon klar, das man diese auch per Hand editieren kann, aber es ist wesentlich komfortabler diese mit apt-setup zu editieren, da hier die Sourcen automatisch angeboten werden und auch eingefügt werden , aber man(n) ist ja von Natur aus faul :) Vielen Dank schon mal im Voraus Tomash sl ritch Danke für eure Hilfe... Tomash
APT Proxy/Network Settings mit testing Version
Hallo, ich habe von sarge auf testing upgegraded und seitdem nutzt apt den HTTP Proxy von meinem LinuxServer. Leider finde ich nirgends die Option das ein/auszuschalten ich habe keine apt.conf sowie auch keine preferences in /etc/apt sondern nur den Eintrag in folgender Datei # cat /etc/apt/apt.conf.d/70debconf // Pre-configure all packages with debconf before they are installed. // If you don't like it, comment it out. DPkg::Pre-Install-Pkgs {/usr/sbin/dpkg-preconfigure --apt || true;}; Dieses hat nichts mit irgendwelchen Netzwerk-Einstellungen für apt zu tun ! Ich hoffe jemand hat ein Idee woran das liegen kann in den Howtos oder FAQs finde ich nichts eindeutiges hierzu. Weiterhin fehlt nun apt-setup gibt es hier ein neues Tool, um die sourcen automatisch in sources.list einzubinden ? Vielen Dank schon mal im Voraus Tomash
Re: APT Proxy/Network Settings mit testing Version
Also sprach Tomash Boy [EMAIL PROTECTED] (Sun, 7 May 2006 18:50:08 +0200 (CEST)): Hallo, Hey, bitte umbreche die Zeilen bei etwa 72 Zeichen, thx. ich habe von sarge auf testing upgegraded und seitdem nutzt apt den HTTP Proxy von meinem LinuxServer. Leider finde ich nirgends die Option das ein/auszuschalten ich habe keine apt.conf sowie auch keine preferences in /etc/apt sondern nur den Eintrag in folgender Datei # cat /etc/apt/apt.conf.d/70debconf // Pre-configure all packages with debconf before they are installed. // If you don't like it, comment it out. DPkg::Pre-Install-Pkgs {/usr/sbin/dpkg-preconfigure --apt || true;}; Dieses hat nichts mit irgendwelchen Netzwerk-Einstellungen für apt zu tun ! Ich hoffe jemand hat ein Idee woran das liegen kann in den Howtos oder FAQs finde ich nichts eindeutiges hierzu. Hast du eine Umgebungvariable fuer einen Proxy gesetzt? (allerdings k.A. ob apt darauf anspricht) Weiterhin fehlt nun apt-setup gibt es hier ein neues Tool, um die sourcen automatisch in sources.list einzubinden ? vim? emacs? ... Vielen Dank schon mal im Voraus Tomash sl ritch
Re: APT Proxy/Network Settings mit testing Version
On 07.05.06 18:50:08, Tomash Boy wrote: Ich unterstuetzte hiermit Richards Wunsch nach einer ertraeglichen Zeilenlaenge. ich habe von sarge auf testing upgegraded und seitdem nutzt apt den HTTP Proxy von meinem LinuxServer. Leider finde ich nirgends die Option das ein/auszuschalten ich habe keine apt.conf sowie auch keine preferences in /etc/apt sondern nur den Eintrag in folgender Datei # cat /etc/apt/apt.conf.d/70debconf // Pre-configure all packages with debconf before they are installed. // If you don't like it, comment it out. DPkg::Pre-Install-Pkgs {/usr/sbin/dpkg-preconfigure --apt || true;}; Dieses hat nichts mit irgendwelchen Netzwerk-Einstellungen für apt zu tun ! Richtig, ich vermute aber mal ganz stark das apt die normalen proxy-Umgebungsvariablen http_proxy und ftp_proxy wahrnimmt und beachtet. Sind die bei dir als root gesetzt? Weiterhin fehlt nun apt-setup gibt es hier ein neues Tool, um die sourcen automatisch in sources.list einzubinden ? Hmm, Google brachte mich auf die BTS-Seite des Quellpakets apt-setup, nach einer Suche danach steht fest: Das gibts nur noch fuer den installer, wenn du das installieren willst musst du es dir per Hand vom Debian-Mirror ziehen (liegt in /debian/pool/a/apt-setup/). Andreas -- You will live a long, healthy, happy life and make bags of money. -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Tedium of Network Settings
I have a box here I am using for various tests. It's got 3 NICs. I have to alter various settings for all or each one of them --domainname, hostname, ip, subnet etc.. I find it rather tedious and error-prone to go through several text files. Is there a way of doing this in a more integrated way; using some sort of GUI --gtk, gnome or kde. Cheers, Ray -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Tedium of Network Settings
On Mon, Nov 29, 2004 at 01:25:22AM +0200, ocl wrote: I have a box here I am using for various tests. It's got 3 NICs. I have to alter various settings for all or each one of them --domainname, hostname, ip, subnet etc.. I find it rather tedious and error-prone to go through several text files. Is there a way of doing this in a more integrated way; using some sort of GUI --gtk, gnome or kde. [EMAIL PROTECTED]:~$ apt-cache search gnome network tool capplets - configuration applets for GNOME 2 - binaries files gnome-nettool - Network information tool for GNOME gnome-panel - Launcher and docking facility for GNOME 2 gnome-system-tools - Cross-platform configuration utilities for GNOME gnome-utils - GNOME desktop utilities gnumeric - A GNOME spreadsheet application gupsc - GNOME client for the Network UPS Tools Package (nut) libgnomedb-dev - frontend to the GDA architecture for GNOME -- development files workrave - RSI prevention tool gnome-nettool and gnome-system-tools seem to be what you're looking for. -- Alex Malinovich Support Free Software, delete your Windows partition TODAY! Encrypted mail preferred. You can get my public key from any of the pgp.net keyservers. Key ID: A6D24837 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Tedium of Network Settings
Ray writes: Is there a way of doing this in a more integrated way... Sure. Write a script. -- John Hasler -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
network settings
Hi, I've run yet into another problem I want to know what the network settings concerning speed and mode are (10 Mb, 100Mb, FDX, HDX). How can I check (and change) those ? Under Solaris, this can be checked / changed with ndd, but it seems (as far as I can tell) that Debian doesn't have such a command ? best regards, Andy Kannberg System Manager SITE UNIX group LG Philips Displays Eindhoven The Netherlands tel: 040 - 2304678 fax: 040 - 2785405 e-mail: [EMAIL PROTECTED]
Re: network settings
apt-get install ethtool: qntal:/proc/sys/net# ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Current message level: 0x00ff (255) Link detected: yes Some drivers spit out some information, but I don't know it they all do qntal:/proc/sys/net# dmesg | grep eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:01:80:3a:02:55 b44: eth0: Link is down. b44: eth0: Link is up at 100 Mbps, full duplex. Other options are the packages nictools-pci || nictools-nopci for EEPROM manipulations of certain cards (nictools-pci contains no broadcom tools :-( so this is not very usefull to me) Or mii-diag: qntal:/proc/sys/net# mii-diag Using the default interface 'eth0'. Basic registers of MII PHY #1: 1000 782d 0040 6360 0de1 45e1 0007 2001. The autonegotiated capability is 01e0. The autonegotiated media type is 100baseTx-FD. Basic mode control register 0x1000: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner advertised 45e1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control. End of basic transceiver information. qntal:/proc/sys/net# mii-tool eth0: negotiated 100baseTx-FD flow-control, link ok hth Elie De Brauwer Hi, I've run yet into another problem I want to know what the network settings concerning speed and mode are (10 Mb, 100Mb, FDX, HDX). How can I check (and change) those ? Under Solaris, this can be checked / changed with ndd, but it seems (as far as I can tell) that Debian doesn't have such a command ? best regards, Andy Kannberg System Manager SITE UNIX group LG Philips Displays Eindhoven The Netherlands tel: 040 - 2304678 fax: 040 - 2785405 e-mail: [EMAIL PROTECTED] -- Elie De Brauwer http://www.de-brauwer.be Hope is the worst of all evils, for it prolongs the torment of a man... --Friedrich Nietzsche-- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: network settings
Andy, On Tuesday 13 April 2004 15:09, [EMAIL PROTECTED] wrote: How can I check (and change) those ? Under Solaris, this can be checked / changed with ndd, but it seems (as far as I can tell) that Debian doesn't have such a command ? You can do this by mii-tool or ethtool. Check for the following packages: mii-diag, nictools-pci, nictools-nopci ethtool Regards, Klaus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to reconfigure network settings easily?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, Jun 04, 2003 at 12:13:11PM +0100, Jon Ramsey wrote: Now for another stupid question... Given that the installation network setup allows me to choose to use dhcp am I likely to have a client already? (i'm at work so i can't check at the moment) Most likely, yes. If not, you can get it off the CD. One more thing, you'll need to reboot, or better yet, do /etc/init.d/networking restart afterward for changes to take effect. - -- .''`. Baloo Ursidae [EMAIL PROTECTED] : :' :proud Debian admin and user `. `'` `- Debian - when you have better things to do than fix a system -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE+3gRSJ5vLSqVpK2kRAkReAJ9gwHVSblZAQEsF+BuHKYrb27ZPmQCePqNi UnwBuSx37q4VX1lOh7SJgGI= =xkxk -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to reconfigure network settings easily?
On Wed, Jun 04, 2003 at 07:38:10AM -0700, Paul Johnson wrote: One more thing, you'll need to reboot, or better yet, do /etc/init.d/networking restart afterward for changes to take effect. Thanks Paul and Ron for your help. I did have the dhcp client already, but I couldn't get everything to work w/o a reboot ;( -- Jon Ramsey Bangoid 111 Stanmore Hill Stanmore Middlesex HA7 3DZ Tel: 020 8954 2900 Fax: 020 8954 8500 http://www.bangoid.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
How to reconfigure network settings easily?
Hi, I'm running a testing/unstable system on a new machine for home. I set up the machine at work with a static ip, gateway and dns for our work network. I've now moved the machine home and I just got cable broadband so I need to change the network settings to use dhcp - whats the best way to make the changes? I don't really know anything about dhcp and I'd prefer not to have to learn too much about it if possible - ideally I want to go thru the network setup part of the installation again or run some similar easy process. Thanks, -- Jon Ramsey Bangoid 111 Stanmore Hill Stanmore Middlesex HA7 3DZ Tel: 020 8954 2900 Fax: 020 8954 8500 http://www.bangoid.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to reconfigure network settings easily?
On Wed, Jun 04, 2003 at 03:14:37AM -0700, Paul Johnson wrote: On Wed, Jun 04, 2003 at 10:46:56AM +0100, Jon Ramsey wrote: I'm running a testing/unstable system on a new machine for home. I set up the machine at work with a static ip, gateway and dns for our work network. I've now moved the machine home and I just got cable broadband so I need to change the network settings to use dhcp - whats the best way to make the changes? By hand. Make sure you have a DHCP client installed before doing all this. In /etc/network/interfaces, you should see a section similar to this: auto eth0 iface eth0 inet static address 192.168.0.4 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Change it to this: auto eth0 iface eth0 inet dhcp Your resolv.conf will be updated automatically by your DHCP client in most cases, consult your DHCP client's documentation for it's exact behavior. Hope this helps. Thanks Paul, this seems great (if almost too simple... ;)). Now for another stupid question... Given that the installation network setup allows me to choose to use dhcp am I likely to have a client already? (i'm at work so i can't check at the moment) The reason I ask is that I don't have network access for the machine thru linux until I set this up... potentially a bit of a catch 22. It's a dual boot machine, so I guess I could try and track down the necessary debs through windows if not. Thanks again, -- Jon Ramsey Bangoid 111 Stanmore Hill Stanmore Middlesex HA7 3DZ Tel: 020 8954 2900 Fax: 020 8954 8500 http://www.bangoid.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to reconfigure network settings easily?
On Wed, 2003-06-04 at 06:13, Jon Ramsey wrote: On Wed, Jun 04, 2003 at 03:14:37AM -0700, Paul Johnson wrote: On Wed, Jun 04, 2003 at 10:46:56AM +0100, Jon Ramsey wrote: I'm running a testing/unstable system on a new machine for home. I set up the machine at work with a static ip, gateway and dns for our work network. I've now moved the machine home and I just got cable broadband so I need to change the network settings to use dhcp - whats the best way to make the changes? By hand. Make sure you have a DHCP client installed before doing all this. In /etc/network/interfaces, you should see a section similar to this: auto eth0 iface eth0 inet static address 192.168.0.4 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Change it to this: auto eth0 iface eth0 inet dhcp Your resolv.conf will be updated automatically by your DHCP client in most cases, consult your DHCP client's documentation for it's exact behavior. Hope this helps. Thanks Paul, this seems great (if almost too simple... ;)). Now for another stupid question... Given that the installation network setup allows me to choose to use dhcp am I likely to have a client already? (i'm at work so i can't check at the moment) The reason I ask is that I don't have network access for the machine thru linux until I set this up... potentially a bit of a catch 22. It's a dual boot machine, so I guess I could try and track down the necessary debs through windows if not. If you can mount any of the FAT drives on Linux (should be able to), you can grab the deb and the copy from there to the linux partition. There are 2 dhcp clients: pump (from Red Hat) and dhcp-client. Most people use dhcp-client, I think. -- +---+ | Ron Johnson, Jr. Home: [EMAIL PROTECTED] | | Jefferson, LA USA http://members.cox.net/ron.l.johnson | | | | Regarding war zones: There's nothing sacrosanct about a | | hotel with a bunch of journalists in it. | | Marine Lt. Gen. Bernard E. Trainor (Retired) | +---+ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
network settings
Hello all, How to share a internet connection in a small network ? I'm using few Pcs without dhcp server/client. Rodrigo ___ Busca Yahoo! O melhor lugar para encontrar tudo o que você procura na Internet http://br.busca.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: network settings
Quoting Rodrigo F. Baroni [EMAIL PROTECTED]: Hello all, How to share a internet connection in a small network ? I'm using few Pcs without dhcp server/client. # apt-get install ipmasq www.tldp.org will have a some good howto's on networking and firewalling/ipmasq stuff etc. Cheers, Mike - This mail sent through IMP: http://horde.org/imp/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: configuring my network settings
Thus spake dman: On Thu, Dec 13, 2001 at 07:30:23PM -0500, spongyboy wrote: | Hello. I am brand new to this. When replying to me, you may write me at | [EMAIL PROTECTED] | and share your ideas about my problem. | I have a c309 ether net card. This is hooked up to a hub. The hub goes | into a fire wall box. The fire wall box is what is attached to a dsl | modem. But the linux box is not the computer with the dsl software on it. | My friend has dsl. His machine is the one with the win poet software. | What network protocal should I use to access the net? When using windows, I | just start internet explorer. My computer just looks for a lan | connection. How can a linux machine do the same thing? What the box looks for is a DHCP server to tell it what IP and what DNS servers to use. In /etc/network/interfaces you want : iface eth0 inet dhcp WinPOEt is pppoe - I looked into it but can't remember now. I believe there is a kernel module for the protocol, as well as user space software. The one from ragingpenguin.com has gotten quite good reviews, although I have never used it myself. HTH, Steve -- The decision doesn't have to be logical; it was unanimous. pgpP5NcWA7DGW.pgp Description: PGP signature
Re: configuring my network settings
On Thu, Dec 13, 2001 at 07:30:23PM -0500, spongyboy wrote: | Hello. I am brand new to this. When replying to me, you may write me at | [EMAIL PROTECTED] | and share your ideas about my problem. | I have a c309 ether net card. This is hooked up to a hub. The hub goes | into a fire wall box. The fire wall box is what is attached to a dsl | modem. But the linux box is not the computer with the dsl software on it. | My friend has dsl. His machine is the one with the win poet software. | What network protocal should I use to access the net? When using windows, I | just start internet explorer. My computer just looks for a lan | connection. How can a linux machine do the same thing? What the box looks for is a DHCP server to tell it what IP and what DNS servers to use. In /etc/network/interfaces you want : iface eth0 inet dhcp HTH, -D -- Through love and faithfulness sin is atoned for; through the fear of the Lord a man avoids evil. Proverbs 16:6
configuring my network settings
Hello. I am brand new to this. When replying to me, you may write me at [EMAIL PROTECTED] and share your ideas about my problem. I have a c309 ether net card. This is hooked up to a hub. The hub goes into a fire wall box. The fire wall box is what is attached to a d s l modem. But the linux box is not the computer with the d s l software on it. My friend has d s l. His machine is the one with the win poet software. What network protocal should I use to access the net? When using windows, I just start internet explorer. My computer just looks for a l a n connection. How can a linux machine do the same thing? _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: how do i configure network settings?
There's a new program in unstable, netconf. You can go through the initial setup again with dpkg-reconfigure base-config. The manual way to set things up is to edit /etc/network/interfaces Make sure the following is in there: auto lo eth0 iface eth0 inet dhcp then run /etc/init.d/networking restart This oughta get your card up On Sat, 10 Feb 2001 [EMAIL PROTECTED] wrote: the kernel in the potato install didn't detect my 3com mini pci(3c556B) ethernet card on my T20, so i compiled the 2.4.1 kernel and now it detects it. but the problem is i still can't get on the net because i didn't configure networking during install... so what program can i run to configure networking? and how do i configure the network when the network gives my dynamic ips? __ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/ -- I can be immature if I want to, because I'm mature enough to make my own decisions. Who is John Galt? [EMAIL PROTECTED]
how do i configure network settings?
the kernel in the potato install didn't detect my 3com mini pci(3c556B) ethernet card on my T20, so i compiled the 2.4.1 kernel and now it detects it. but the problem is i still can't get on the net because i didn't configure networking during install... so what program can i run to configure networking? and how do i configure the network when the network gives my dynamic ips? __ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/
Re: how do i configure network settings?
On Sat, Feb 10, 2001 at 09:55:35PM -0500, [EMAIL PROTECTED] wrote: the kernel in the potato install didn't detect my 3com mini pci(3c556B) ethernet card on my T20, so i compiled the 2.4.1 kernel and now it detects it. but the problem is i still can't get on the net because i didn't configure networking during install... so what program can i run to configure networking? and how do i configure the network when the network gives my dynamic ips? Please set your mail client to wrap at 72 characters. Just edit - /etc/network/interfaces Take a look at man interfaces It should look something like - iface eth0 inet static address 192.168.10.7 netmask 255.255.255.0 network 192.168.10.0 broadcast 192.168.10.255 gateway 192.168.10.1 depending on your configuration. Then run - # /etc/init.d/networking restart That should do it. hth, kent -- From seeing and seeing the seeing has become so exhausted First line of The Panther - R. M. Rilke
Re: how do i configure network settings?
On Sat, 10 Feb 2001 21:55:35 -0500 BizarroBum writes: B the problem is i still can't get on the net because i B didn't configure networking during install... so what B program can i run to configure networking? and how do B i configure the network when the network gives my B dynamic ips? I run woody with kernel 2.4.1, using DHCP. My configuration file of network interface is following. --- begin --- $ cat /etc/network/interfaces # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface # automatically added when upgrading auto lo iface lo inet loopback # The first network card - this entry was created during the Debian installation # automatically added when upgrading auto eth0 iface eth0 inet dhcp --- end --- When you edit your configuration file, you should restart your network. $ sudo /etc/init.d/networking restart Susumu Takuwa
Re: how do i configure network settings?
[EMAIL PROTECTED] wrote: the kernel in the potato install didn't detect my 3com mini pci(3c556B) ethernet card on my T20, so i compiled the 2.4.1 kernel and now it detects it. but the problem is i still can't get on the net because i didn't configure networking during install... so what program can i run to configure networking? and how do i configure the network when the network gives my dynamic ips? Add to /etc/network/interfaces: iface eth0 inet dhcp hostname ??? Assuming the 3com module is loaded ifup eth0 should bring up the iface. Check it with ifconfig eth0. -- ~~~
Re: Network settings and ppp
On Sun, 14 Jan 2001, Elizabeth R. Chichester wrote: Okay, I made a mistake. When I set up Debian on my home machine, I was thinking in terms of a home network and so set up networking (through eth0). Unfortunately, I got ahead of myself and don't have everything set up. Specifically, I didn't have internet access handled. I did set up wvdial during the installation process. It works. I'm able to connect to the ISP. However, I can't get a DNS reading (i.e., I can't ping anything successfully). The Gnome ppp dialer (where you can specify the DNS addresses of the ISP) consistently gives an error message. I belive that the option 'usepeerdns' in the pppd options file configures your system for that session with the ISP's DNS. Greetz, Sebastiaan Does anyone know (or can you direct me) to where I should disable networking so that I can get DNS through my ISP and otherwise get on the 'net? Just a sample /etc/init.d/networking and /etc/resolv.conf (or other files) might do the trick. TIA, Ron ./. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Network settings and ppp
On Sun, Jan 14, 2001 at 11:54:04PM -0500, David B. Harris wrote: To quote Elizabeth R. Chichester [EMAIL PROTECTED], # Okay, I made a mistake. When I set up Debian on my home machine, I was # thinking in terms of a home network and so set up networking (through # eth0). Unfortunately, I got ahead of myself and don't have everything # set up. Specifically, I didn't have internet access handled. # # I did set up wvdial during the installation process. It works. I'm # able to connect to the ISP. However, I can't get a DNS reading (i.e., I # can't ping anything successfully). The Gnome ppp dialer (where you can # specify the DNS addresses of the ISP) consistently gives an error # message. # # Does anyone know (or can you direct me) to where I should disable # networking so that I can get DNS through my ISP and otherwise get on the # 'net? Just a sample /etc/init.d/networking and /etc/resolv.conf (or # other files) might do the trick. Sure :) /etc/resolv.conf should look something like: order hosts,bind Mmm, don;t thinks so. Are you not mixing up hosts.conf with resolv.conf here ? Cliff nameserver ip.address.of.nameserver nameserver ip.address.of.2nd-nameserver That'll probably fix things, but no guarantees ;) Consider this a quick-fix :) David Barclay Harris, Clan Barclay Aut agere, aut mori. (Either action, or death.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Network settings and ppp
Okay, I made a mistake. When I set up Debian on my home machine, I was thinking in terms of a home network and so set up networking (through eth0). Unfortunately, I got ahead of myself and don't have everything set up. Specifically, I didn't have internet access handled. I did set up wvdial during the installation process. It works. I'm able to connect to the ISP. However, I can't get a DNS reading (i.e., I can't ping anything successfully). The Gnome ppp dialer (where you can specify the DNS addresses of the ISP) consistently gives an error message. Does anyone know (or can you direct me) to where I should disable networking so that I can get DNS through my ISP and otherwise get on the 'net? Just a sample /etc/init.d/networking and /etc/resolv.conf (or other files) might do the trick. TIA, Ron ./.
Re: Network settings and ppp
To quote Elizabeth R. Chichester [EMAIL PROTECTED], # Okay, I made a mistake. When I set up Debian on my home machine, I was # thinking in terms of a home network and so set up networking (through # eth0). Unfortunately, I got ahead of myself and don't have everything # set up. Specifically, I didn't have internet access handled. # # I did set up wvdial during the installation process. It works. I'm # able to connect to the ISP. However, I can't get a DNS reading (i.e., I # can't ping anything successfully). The Gnome ppp dialer (where you can # specify the DNS addresses of the ISP) consistently gives an error # message. # # Does anyone know (or can you direct me) to where I should disable # networking so that I can get DNS through my ISP and otherwise get on the # 'net? Just a sample /etc/init.d/networking and /etc/resolv.conf (or # other files) might do the trick. Sure :) /etc/resolv.conf should look something like: order hosts,bind nameserver ip.address.of.nameserver nameserver ip.address.of.2nd-nameserver That'll probably fix things, but no guarantees ;) Consider this a quick-fix :) David Barclay Harris, Clan Barclay Aut agere, aut mori. (Either action, or death.)
Re: changing network settings
on Sun, Nov 19, 2000 at 12:42:17AM +1100, Daniel Knights ([EMAIL PROTECTED]) wrote: Hi, I am new to debian and to change the network setting I edited the hosts, hostname, host.conf, networks and resolve.conf files and restarted the box. Is there a one stop shop for this like yast for SuSe or linuxconf for redhat. Linuxconf exists, but the method you describe is preferable. -- Karsten M. Self kmself@ix.netcom.com http://www.netcom.com/~kmself Evangelist, Zelerate, Inc. http://www.zelerate.org What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/http://www.kuro5hin.org pgp9DtCnys5md.pgp Description: PGP signature
changing network settings
Hi, I am new to debian and to change the network setting I edited the hosts, hostname, host.conf, networks and resolve.conf files and restarted the box. Is there a one stop shop for this like yast for SuSe or linuxconf for redhat. Cheers Daniel Regards, Daniel ___ Daniel Knights Highway Internet Services ABN: 14 088 130 269 Part of the LiSP Group http://www.lisp.com.au Servicing the Dubbo, Mudgee, Coonabarabran, Gilgandra, Warren, Wellington and surrounding areas. Enquiries 02 6372 3645 129 Market St, Mudgee 2850
ppp network settings
I'm tring to setup dialup to my linux box. Currently, I can connect, login, and resolve DNS. I can not ping _any_ ip addressess (not even my linux box). I think I have the DNS and /etc/hosts configured correctly. However, the ppp0 --- eth1 is not configured at all. I only have one ip address, so ip masquerading needs to be setup. I already have ip masquerading from eth0 --- eth1 working. Can anyone help me? Thanks -Paul -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: network settings
Uhm, this will allow the network to work but it is wrong. It will not modify all the files in the /etc directory that need changing. Doing the network setup from the install disk should set everything up correctly including resolv.conf, etc. On 24-Sep-97 dpk wrote: Edit the file /etc/init.d/network and change the settings as needed. When you exit and save, as root, just rerun the script by typing /etc/init.d/network to enable the new settings. Thanks, Dennis -- dpk [EMAIL PROTECTED], Systems/Network | work: 353.4844 Division of Enginnering Computing Services | page: 222.5875 On Wed, 24 Sep 1997, Marc Fleureck wrote: Which command/utility should I run to reconfigure network settings (IP, hostname, gateway, etc ...) ? Regards, Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . --- George Bonser Debian/GNU Linux See http://www.debian.org Linux ... It isn't just for breakfast anymore! -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: network settings
George Bonser writes: Doing the network setup from the install disk should set everything up correctly including resolv.conf, etc. Perhaps a network configuration utility could be created from the network install and put in base? -- John HaslerThis posting is in the public domain. [EMAIL PROTECTED] Do with it what you will. Dancing Horse Hill Make money from it if you can; I don't mind. Elmwood, Wisconsin Do not send email advertisements to this address. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
network settings
Which command/utility should I run to reconfigure network settings (IP, hostname, gateway, etc ...) ? Regards, Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
RE: network settings
If I remember correctly, you can do it using the install diskette. Skip the parts about initializing filesystems, mount your already existing partitions and select the option to configure the network, reboot, and you should be done. Just DO NOT initialize the filesystems. That erases what you have on there. On 24-Sep-97 Marc Fleureck wrote: Which command/utility should I run to reconfigure network settings (IP, hostname, gateway, etc ...) ? Regards, Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: network settings
Edit the file /etc/init.d/network and change the settings as needed. When you exit and save, as root, just rerun the script by typing /etc/init.d/network to enable the new settings. Thanks, Dennis -- dpk [EMAIL PROTECTED], Systems/Network | work: 353.4844 Division of Enginnering Computing Services | page: 222.5875 On Wed, 24 Sep 1997, Marc Fleureck wrote: Which command/utility should I run to reconfigure network settings (IP, hostname, gateway, etc ...) ? Regards, Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] . -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .