from:"Thushara Ranawaka"

Hi Nirmal,
If we can use -n alone with -i will do the job(tested in mac osx).

example:- sed -i -n s@USERSTORE_DB_SCHEMA@$userstore_db_schema@g mysql.sql

in the sed manual its stated like this

 -i *extension*

 Edit files in-place, saving backups with the specified
extension.  If a zero-length extension is given, no backup will be saved.
It is not recommended to give a zero-length extension when in-place

 editing files, as you risk corruption or partial content in
situations where disk space is exhausted, etc.

 -n

 By default, each line of input is echoed to the standard
output after all of the commands have been applied to it.  The -n option
suppresses this behavior.


Thanks,

Thushara

On Wed, Sep 24, 2014 at 11:07 AM, Nirmal Fernando nir...@wso2.com wrote:

 Guys,

 One concern; isn't there anyway to avoid this new package installation ?
 Wouldn't sed -n an option in OS X (
 http://www.maclife.com/article/columns/terminal_101_find_and_replace_using_sed
 )

 On Wed, Sep 17, 2014 at 11:48 PM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi,

 Thank you Prasanna for the prompt reply and helping to rectifying the
 issue(using gsed -i instead of sed -i).
 Finally we were able to start Stratos in our mac books. I would like to
 merge all the findings together for more clarification.

 In our review we found that below problems in respective shell scripts.

 1) In setup.sh  line 539 the activemq.xml location is hard coded.
 2) sed -i is included in many of the shell scripts.
 3) use of illegal group name. (line 580 chown -R *$host_user:$host_user*
 $stratos_path)

 As per the work around solution :-

 1)We added below lines to the setup.conf eod
 # activemq.xml path
 #
 
 export activemq_xml=/opt/stratos/apache-activemq-5.10.0/conf/activemq.xml

 2)
 i. Installed homebrew http://brew.sh/
 ruby -e $(curl -fsSL
 https://raw.githubusercontent.com/Homebrew/install/master/install)
 ii. Installed gnu-sed
 brew install gnu-sed
 iii. Changed sed -i to gsed -i in *demo.sh, ec2.sh,openstack.sh,
 add_entry_zone_file.sh, remove_entry_zone_file.sh, setup.sh and vcloud.sh.*
 (I uploaded the edit files below and the link
 https://drive.google.com/file/d/0B7SZH36oFys3LXBpaG83RC16Mk0/edit?usp=sharing
  for
 g-drive file location)

 3) Adding a user group as same as your user name in mac osx (System
 Preferences - Users  Groups (Unlock to change) - new Group as 'suhanr')

 Hope these simple steps will rectify the issue.

 Thanks,
 Thushara.


 On Wed, Sep 17, 2014 at 4:44 PM, Suhan Dharmasuriya suh...@wso2.com
 wrote:

 Hi all,

 Adding to Prasanna's comment.

 Following issue,
 Changing owner of /WSO2/Products/stratos/opt/stratos to suhanr:suhanr
 chown: suhanr: illegal group name
 was solved by,
 1. Adding a user group as suhanr in mac osx (System Preferences - Users
  Groups (Unlock to change) - new Group as 'suhanr')
 2.  sudo chown -R suhanr:suhanr *

 Thanks,
 Suhan

 On Wed, Sep 17, 2014 at 4:39 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 Hi all,

 Issue was with the sed and database name.

 Fixed those in suhanr's  mac and stratos installed successfully :D .

 Step followed

 1. Installed homerew
 ruby -e $(curl -fsSL
 https://raw.githubusercontent.com/Homebrew/install/master/install)
 2. Installed gnu-sed
 brew install gnu-sed
 3. Changed 'sed' to 'gsed' in setup.sh and openstack.sh scripts
 4. Run setup.sh

 No issues in clean.sh


 On Wed, Sep 17, 2014 at 3:24 PM, Nirmal Fernando nir...@wso2.com
 wrote:

 Please check the place where it creates this database. Seems like it's
 not properly replaced.

 On Wed, Sep 17, 2014 at 3:22 PM, Thushara Ranawaka thusha...@wso2.com
  wrote:

 Hi Manula,
 Yes it is.


 On Wed, Sep 17, 2014 at 3:18 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi,

 It might be a problem. Then it create the database as
 USERSTORE_DB_SCHEMA. Isn't it ?

 On Wed, Sep 17, 2014 at 3:10 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi,

 Issue was the database name.
 I did the following changes in the setup.conf and now clean.sh is
 working properly.

 # export userstore_db_schema=userstore
 export userstore_db_schema=USERSTORE_DB_SCHEMA # for mac osx

 Is there any issue or conflict in above setup?

 Thanks,
 Thushara

 On Wed, Sep 17, 2014 at 2:50 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Manula,

 FYI

 In mac when we run mysql -u $mysql_user -p$mysql_pass -e DROP
 DATABASE IF EXISTS $userstore_db_schema;  it works without any
 issue. we will debug the shell script and let you know.

 mysql show databases;

 +-+

 | Database|

 +-+

 | information_schema  |

 | USERSTORE_DB_SCHEMA |

 | mysql   |

 | performance_schema  |

 | test|

 +-+

 5 rows in set (0.00 sec)


 mysql exit

 Bye

 Thusharas-MacBook-Pro

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi Nirmal,
We had below issue as well,

sed: illegal option -- r

usage: sed script [-Ealn] [-i extension] [file ...]

   sed [-Ealn] [-i extension] [-e script] ... [-f script_file] ...
[file ...]

Above error generated when we try to execute

line 549 sed-r -i -e 's@^(\s*)(transportConnector
name=amqp.*\s*)$@\1!--\2--@g' $activemq_path/conf/activemq.xml

will do some testing and get to you with the results.

Thank you!


On Wed, Sep 24, 2014 at 11:44 AM, Nirmal Fernando nir...@wso2.com wrote:

 Cool.. thanks for checking. So, we could go with this? Wdyt? This avoid
 the pre-requisite of having gsed.

 On Wed, Sep 24, 2014 at 11:42 AM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi Nirmal,
 If we can use -n alone with -i will do the job(tested in mac osx).

 example:- sed -i -n s@USERSTORE_DB_SCHEMA@$userstore_db_schema@g
 mysql.sql

 in the sed manual its stated like this

  -i *extension*

  Edit files in-place, saving backups with the specified
 extension.  If a zero-length extension is given, no backup will be
 saved.  It is not recommended to give a zero-length extension when
 in-place

  editing files, as you risk corruption or partial content in
 situations where disk space is exhausted, etc.

  -n

  By default, each line of input is echoed to the standard
 output after all of the commands have been applied to it.  The -n option
 suppresses this behavior.


 Thanks,

 Thushara

 On Wed, Sep 24, 2014 at 11:07 AM, Nirmal Fernando nir...@wso2.com
 wrote:

 Guys,

 One concern; isn't there anyway to avoid this new package installation ?
 Wouldn't sed -n an option in OS X (
 http://www.maclife.com/article/columns/terminal_101_find_and_replace_using_sed
 )

 On Wed, Sep 17, 2014 at 11:48 PM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi,

 Thank you Prasanna for the prompt reply and helping to rectifying the
 issue(using gsed -i instead of sed -i).
 Finally we were able to start Stratos in our mac books. I would like to
 merge all the findings together for more clarification.

 In our review we found that below problems in respective shell scripts.

 1) In setup.sh  line 539 the activemq.xml location is hard coded.
 2) sed -i is included in many of the shell scripts.
 3) use of illegal group name. (line 580 chown -R
 *$host_user:$host_user* $stratos_path)

 As per the work around solution :-

 1)We added below lines to the setup.conf eod
 # activemq.xml path
 #
 
 export
 activemq_xml=/opt/stratos/apache-activemq-5.10.0/conf/activemq.xml

 2)
 i. Installed homebrew http://brew.sh/
 ruby -e $(curl -fsSL
 https://raw.githubusercontent.com/Homebrew/install/master/install)
 ii. Installed gnu-sed
 brew install gnu-sed
 iii. Changed sed -i to gsed -i in *demo.sh, ec2.sh,openstack.sh,
 add_entry_zone_file.sh, remove_entry_zone_file.sh, setup.sh and vcloud.sh.*
 (I uploaded the edit files below and the link
 https://drive.google.com/file/d/0B7SZH36oFys3LXBpaG83RC16Mk0/edit?usp=sharing
  for
 g-drive file location)

 3) Adding a user group as same as your user name in mac osx (System
 Preferences - Users  Groups (Unlock to change) - new Group as 'suhanr')

 Hope these simple steps will rectify the issue.

 Thanks,
 Thushara.


 On Wed, Sep 17, 2014 at 4:44 PM, Suhan Dharmasuriya suh...@wso2.com
 wrote:

 Hi all,

 Adding to Prasanna's comment.

 Following issue,
 Changing owner of /WSO2/Products/stratos/opt/stratos to suhanr:suhanr
 chown: suhanr: illegal group name
 was solved by,
 1. Adding a user group as suhanr in mac osx (System Preferences -
 Users  Groups (Unlock to change) - new Group as 'suhanr')
 2.  sudo chown -R suhanr:suhanr *

 Thanks,
 Suhan

 On Wed, Sep 17, 2014 at 4:39 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 Hi all,

 Issue was with the sed and database name.

 Fixed those in suhanr's  mac and stratos installed successfully :D .

 Step followed

 1. Installed homerew
 ruby -e $(curl -fsSL
 https://raw.githubusercontent.com/Homebrew/install/master/install)
 2. Installed gnu-sed
 brew install gnu-sed
 3. Changed 'sed' to 'gsed' in setup.sh and openstack.sh scripts
 4. Run setup.sh

 No issues in clean.sh


 On Wed, Sep 17, 2014 at 3:24 PM, Nirmal Fernando nir...@wso2.com
 wrote:

 Please check the place where it creates this database. Seems like
 it's not properly replaced.

 On Wed, Sep 17, 2014 at 3:22 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Manula,
 Yes it is.


 On Wed, Sep 17, 2014 at 3:18 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi,

 It might be a problem. Then it create the database as
 USERSTORE_DB_SCHEMA. Isn't it ?

 On Wed, Sep 17, 2014 at 3:10 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi,

 Issue was the database name.
 I did the following changes in the setup.conf and now clean.sh is
 working properly.

 # export userstore_db_schema=userstore
 export userstore_db_schema

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi,
In my background search i found that sed -r option is not available in mac
osx(not included in mac osx sed manual)

(below the result in ubuntu)
$ man sed
-r, --regexp-extended

  use extended regular expressions in the script.

In mac os x we can use -E instead of -r if so we need to have two
configuration folders, one for ubuntu and other one for mac(may be more in
future). As Nirmal mentioned this is a maintenance overhead IMO. It will be
better if we move forward with gsed since it is same as sed we use in unix
systems.

(man result in mac)
$ man sed

-E  Interpret regular expressions as extended (modern) regular
expressions rather than basic regular expressions (BRE's).  The
re_format(7) manual page fully describes both formats.


thanks,

Thushara

On Wed, Sep 24, 2014 at 1:42 PM, Nirmal Fernando nir...@wso2.com wrote:

 It's a maintenance overhead IMO and I don't think it's a best practice.


 On Wed, Sep 24, 2014 at 12:30 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 Hi ,

 Me too think its good to have separate scripts for mac. If that so my
 attached scripts can be used.

 Thanks

 On Wed, Sep 24, 2014 at 12:19 PM, Udara Liyanage ud...@wso2.com wrote:

 Hi,

 Make sure your changes works in Linux(Debian) environment too. In case
 we can not make a script that works on both environments, it is better to
 have separate scripts for Mac.
 IMO It is better not to have dependent prerequisites for Linux
 environments.

 On Wed, Sep 24, 2014 at 11:59 AM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi Nirmal,
 We had below issue as well,

 sed: illegal option -- r

 usage: sed script [-Ealn] [-i extension] [file ...]

sed [-Ealn] [-i extension] [-e script] ... [-f script_file] ...
 [file ...]

 Above error generated when we try to execute

 line 549 sed-r -i -e 's@^(\s*)(transportConnector
 name=amqp.*\s*)$@\1!--\2--@g' $activemq_path/conf/activemq.xml

 will do some testing and get to you with the results.

 Thank you!


 On Wed, Sep 24, 2014 at 11:44 AM, Nirmal Fernando nir...@wso2.com
 wrote:

 Cool.. thanks for checking. So, we could go with this? Wdyt? This
 avoid the pre-requisite of having gsed.

 On Wed, Sep 24, 2014 at 11:42 AM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Nirmal,
 If we can use -n alone with -i will do the job(tested in mac osx).

 example:- sed -i -n s@USERSTORE_DB_SCHEMA@$userstore_db_schema@g
 mysql.sql

 in the sed manual its stated like this

  -i *extension*

  Edit files in-place, saving backups with the specified
 extension.  If a zero-length extension is given, no backup will be
 saved.  It is not recommended to give a zero-length extension when
 in-place

  editing files, as you risk corruption or partial content
 in situations where disk space is exhausted, etc.

  -n

  By default, each line of input is echoed to the standard
 output after all of the commands have been applied to it.  The -n
 option suppresses this behavior.


 Thanks,

 Thushara

 On Wed, Sep 24, 2014 at 11:07 AM, Nirmal Fernando nir...@wso2.com
 wrote:

 Guys,

 One concern; isn't there anyway to avoid this new package
 installation ? Wouldn't sed -n an option in OS X (
 http://www.maclife.com/article/columns/terminal_101_find_and_replace_using_sed
 )

 On Wed, Sep 17, 2014 at 11:48 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi,

 Thank you Prasanna for the prompt reply and helping to rectifying
 the issue(using gsed -i instead of sed -i).
 Finally we were able to start Stratos in our mac books. I would
 like to merge all the findings together for more clarification.

 In our review we found that below problems in respective shell
 scripts.

 1) In setup.sh  line 539 the activemq.xml location is hard coded.
 2) sed -i is included in many of the shell scripts.
 3) use of illegal group name. (line 580 chown -R
 *$host_user:$host_user* $stratos_path)

 As per the work around solution :-

 1)We added below lines to the setup.conf eod
 # activemq.xml path
 #
 
 export
 activemq_xml=/opt/stratos/apache-activemq-5.10.0/conf/activemq.xml

 2)
 i. Installed homebrew http://brew.sh/
 ruby -e $(curl -fsSL
 https://raw.githubusercontent.com/Homebrew/install/master/install)
 ii. Installed gnu-sed
 brew install gnu-sed
 iii. Changed sed -i to gsed -i in *demo.sh,
 ec2.sh,openstack.sh, add_entry_zone_file.sh, remove_entry_zone_file.sh,
 setup.sh and vcloud.sh.*
 (I uploaded the edit files below and the link
 https://drive.google.com/file/d/0B7SZH36oFys3LXBpaG83RC16Mk0/edit?usp=sharing
  for
 g-drive file location)

 3) Adding a user group as same as your user name in mac osx
 (System Preferences - Users  Groups (Unlock to change) - new Group 
 as
 'suhanr')

 Hope these simple steps will rectify the issue.

 Thanks,
 Thushara.


 On Wed, Sep 17, 2014 at 4:44 PM, Suhan Dharmasuriya 
 suh...@wso2.com wrote:

 Hi all,

 Adding

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi all,
We are moving forward with proposed[1] development.

Thanks all !

[1] - https://github.com/apache/stratos/pull/54#issuecomment-56644808

On Wed, Sep 24, 2014 at 4:46 PM, Uvindra Dias Jayasinha uvin...@wso2.com
wrote:

 Just my two cents, if its not possible to have a shell script that runs on
 all environments and we want to prevent maintaining multiple env specific
 scripts, it might be a good idea to consider a higher level multi platform
 scripting language such as Python(which comes pre-installed on Mac and
 Linux) for these purposes. Then we wont need to deal with platform specific
 implementation limitations.

 On 24 September 2014 14:28, Thushara Ranawaka thusha...@wso2.com wrote:

 Hi,
 In my background search i found that sed -r option is not available in
 mac osx(not included in mac osx sed manual)

 (below the result in ubuntu)
 $ man sed
 -r, --regexp-extended

   use extended regular expressions in the script.

 In mac os x we can use -E instead of -r if so we need to have two
 configuration folders, one for ubuntu and other one for mac(may be more in
 future). As Nirmal mentioned this is a maintenance overhead IMO. It will
 be better if we move forward with gsed since it is same as sed we use in
 unix systems.

 (man result in mac)
 $ man sed

 -E  Interpret regular expressions as extended (modern) regular
 expressions rather than basic regular expressions (BRE's).  The
 re_format(7) manual page fully describes both formats.


 thanks,

 Thushara

 On Wed, Sep 24, 2014 at 1:42 PM, Nirmal Fernando nir...@wso2.com wrote:

 It's a maintenance overhead IMO and I don't think it's a best practice.


 On Wed, Sep 24, 2014 at 12:30 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 Hi ,

 Me too think its good to have separate scripts for mac. If that so my
 attached scripts can be used.

 Thanks

 On Wed, Sep 24, 2014 at 12:19 PM, Udara Liyanage ud...@wso2.com
 wrote:

 Hi,

 Make sure your changes works in Linux(Debian) environment too. In case
 we can not make a script that works on both environments, it is better to
 have separate scripts for Mac.
 IMO It is better not to have dependent prerequisites for Linux
 environments.

 On Wed, Sep 24, 2014 at 11:59 AM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Nirmal,
 We had below issue as well,

 sed: illegal option -- r

 usage: sed script [-Ealn] [-i extension] [file ...]

sed [-Ealn] [-i extension] [-e script] ... [-f script_file]
 ... [file ...]

 Above error generated when we try to execute

 line 549 sed-r -i -e 's@^(\s*)(transportConnector
 name=amqp.*\s*)$@\1!--\2--@g' $activemq_path/conf/activemq.xml

 will do some testing and get to you with the results.

 Thank you!


 On Wed, Sep 24, 2014 at 11:44 AM, Nirmal Fernando nir...@wso2.com
 wrote:

 Cool.. thanks for checking. So, we could go with this? Wdyt? This
 avoid the pre-requisite of having gsed.

 On Wed, Sep 24, 2014 at 11:42 AM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Nirmal,
 If we can use -n alone with -i will do the job(tested in mac osx).

 example:- sed -i -n s@USERSTORE_DB_SCHEMA@$userstore_db_schema@g
 mysql.sql

 in the sed manual its stated like this

  -i *extension*

  Edit files in-place, saving backups with the specified
 extension.  If a zero-length extension is given, no backup will be
 saved.  It is not recommended to give a zero-length extension when
 in-place

  editing files, as you risk corruption or partial
 content in situations where disk space is exhausted, etc.

  -n

  By default, each line of input is echoed to the
 standard output after all of the commands have been applied to it.  The
 -n option suppresses this behavior.


 Thanks,

 Thushara

 On Wed, Sep 24, 2014 at 11:07 AM, Nirmal Fernando nir...@wso2.com
 wrote:

 Guys,

 One concern; isn't there anyway to avoid this new package
 installation ? Wouldn't sed -n an option in OS X (
 http://www.maclife.com/article/columns/terminal_101_find_and_replace_using_sed
 )

 On Wed, Sep 17, 2014 at 11:48 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi,

 Thank you Prasanna for the prompt reply and helping to rectifying
 the issue(using gsed -i instead of sed -i).
 Finally we were able to start Stratos in our mac books. I would
 like to merge all the findings together for more clarification.

 In our review we found that below problems in respective shell
 scripts.

 1) In setup.sh  line 539 the activemq.xml location is hard
 coded.
 2) sed -i is included in many of the shell scripts.
 3) use of illegal group name. (line 580 chown -R
 *$host_user:$host_user* $stratos_path)

 As per the work around solution :-

 1)We added below lines to the setup.conf eod
 # activemq.xml path
 #
 
 export
 activemq_xml=/opt/stratos/apache-activemq-5.10.0/conf/activemq.xml

 2)
 i. Installed homebrew http://brew.sh/
 ruby -e $(curl -fsSL
 https

Re: [Dev] Error while building ELB 2.1.1

Hi,
Kindly send the full error log and the pom.xml file.
Thanks,
Thushara.

On Wed, Sep 17, 2014 at 12:34 PM, Rajakrishna Reddy va...@outlook.com
wrote:

 Hi,
 I'm trying to build the ELB 2.1.1 but getting the below error.

 [INFO] Executed tasks
 [INFO]
 [INFO] --- maven-assembly-plugin:2.2-beta-2:attached (dist) @ wso2elb ---
 [INFO] Reading assembly descriptor: src/main/assembly/bin.xml
 [INFO] Processing DependencySet
 (output=wso2elb-${pom.version}/lib/core/WEB-INF/lib)
 [INFO]
 
 [INFO] Reactor Summary:
 [INFO]
 [INFO] WSO2 ELB - Distribution ... FAILURE
 [42.507s]
 [INFO] WSO2 MB ... SKIPPED
 [INFO] WSO2 MB Styles Parent . SKIPPED
 [INFO] WSO2 MB Styles  SKIPPED
 [INFO] WSO2 Stratos Message Broker - Styles .. SKIPPED
 [INFO] WSO2 MB Features Parent ... SKIPPED
 [INFO] WSO2 MB Features Aggregator Module  SKIPPED
 [INFO] WSO2 MB - Styles Features . SKIPPED
 [INFO] WSO2 Stratos Message Broker - Features Aggregator Module  SKIPPED
 [INFO] WSO2 Stratos Message Broker - Styles Features . SKIPPED
 [INFO] WSO2 Stratos Message Broker - Login User Interface  SKIPPED
 [INFO] WSO2 Stratos Message Broker - Deployment Features . SKIPPED
 [INFO] WSO2 Stratos Message Broker - Dashboard UI  SKIPPED
 [INFO] WSO2 Stratos Message Broker - Dashboard UI Features  SKIPPED
 [INFO] WSO2 Message Broker - P2 Profile Generation ... SKIPPED
 [INFO] WSO2 Message Broker - Distribution  SKIPPED
 [INFO] WSO2 MB - Integration Tests ... SKIPPED
 [INFO] WSO2 MB - Integration Test Module . SKIPPED
 [INFO] WSO2 Carbon - Releases - products - Aggregator Module  SKIPPED
 [INFO]
 
 [INFO] BUILD FAILURE
 [INFO]
 
 [INFO] Total time: 47.866s
 [INFO] Finished at: Wed Sep 17 12:11:03 IST 2014
 [INFO] Final Memory: 144M/1749M
 [INFO]
 
 [ERROR] Failed to execute goal
 org.apache.maven.plugins:maven-assembly-plugin:2.2-beta-2:attached (dist)
 on project wso2elb: Execution dist of goal org.apache.maven.plugins:mave
 n-assembly-plugin:2.2-beta-2:attached failed: For artifact
 {null:null:null:jar}: The groupId cannot be empty. - [Help 1]
 [ERROR]
 [ERROR] To see the full stack trace of the errors, re-run Maven with the
 -e switch.
 [ERROR] Re-run Maven using the -X switch to enable full debug logging.
 [ERROR]
 [ERROR] For more information about the errors and possible solutions,
 please read the following articles:
 [ERROR] [Help 1]
 http://cwiki.apache.org/confluence/display/MAVEN/PluginExecutionException


 Can anybody suggest what should be the done in order to build it
 successfully.
 Between I'm able to build AM, IS an other servers without any issue.


 Thanks  Regards,
 Rajakrishna Reddy,
 +91 95000 88012




 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




-- 
Thushara Kasun Ranawaka
Software Engineer
WSO2 Inc.; http://www.wso2.com
lean.enterprise.middleware
Mobile : *+94 (0) 773438949*
*thusha...@wso2.com thusha...@wso2.com*
___
Dev mailing list
Dev@wso2.org
http://wso2.org/cgi-bin/mailman/listinfo/dev

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi Udara,
Yes, We will do the needful.

Thanks,
Thushara.

On Wed, Sep 17, 2014 at 12:43 PM, Udara Liyanage ud...@wso2.com wrote:

On Wed, Sep 17, 2014 at 12:16 PM, Suhan Dharmasuriya suh...@wso2.com
wrote:

Thanks Lasindu,

Thushara and I are in the process of modifying the shell scripts suitable
for osx.
We contacted Nirmal, Lakmal, Waruna and Udara and had a quick discussion.

After the discussion, the solution we found was to delete the
USERSTORE_DB_SCHEMA database from mysql manually.

As mentioned earlier, once $ sudo ./setup.sh -p default -s command is
run we get the following error.
outputEventAdaptor name=JMSOutputAdaptor statistics=disable
trace=enable type=jms xmlns=
http://wso2.org/carbon/eventadaptormanager;
!--property
name=java.naming.provider.urlCEP_HOME/repository/conf/jndi.properties/property--
property name=java.naming.provider.urltcp://10.100.5.175:61616
/property
property
name=java.naming.factory.initialorg.apache.activemq.jndi.ActiveMQInitialContextFactory/property
property
name=transport.jms.ConnectionFactoryJNDINameTopicConnectionFactory/property
property name=transport.jms.DestinationTypetopic/property
/outputEventAdaptor
End configuring the Complex Event Processor
/WSO2/Products/stratos/opt/stratos-installer
Changing owner of /WSO2/Products/stratos/opt/stratos to suhanr:suhanr
chown: suhanr: illegal group name

What it tries to do is changing the ownership of installer to user suhanr
that he can start Stratos. I guess the user group suhanr is not present
in your environment. Please check with the command groups.

*After the second attempt we were getting the said error. $subject.*

mysql drop database *USERSTORE_DB_SCHEMA*;
Query OK, 39 rows affected (0.05 sec)

Then we were able to avoid the mentioned error in $subject.

Thanks,
Suhan

On Wed, Sep 17, 2014 at 11:21 AM, Lasindu Charith lasi...@wso2.com
wrote:

Hi Thushara and Suhan,

Better if you can discuss the issues related to Apaches Stratos in
stratos-dev list (http://stratos.apache.org/community/mailing-lists.html
)
But for now, regarding the issues you have when setting up Stratos in
osx, Nirmal, Reka or Prasanna might be able to help (Added).

Thanks,

On Tue, Sep 16, 2014 at 3:57 PM, Suhan Dharmasuriya suh...@wso2.com
wrote:

We have installed mysql for OSX 10.9 [1]

[1] http://www.macminivault.com/mysql-mavericks/

On Tue, Sep 16, 2014 at 3:55 PM, Suhan Dharmasuriya suh...@wso2.com
wrote:

Hi,

Myself and Thushara were following the tutorial [1] installing apache
Stratos and came to the following section.

- Run the stratos-setup.sh file as the root.

$ sudo ./setup.sh -p default

After running the command we got the following error in our mac book
pros.
Detail terminal output is attached in the mail for reference.

/WSO2/Products/stratos/opt/stratos-installer
Warning: Using a password on the command line interface can be
insecure.
*ERROR 1061 (42000) at line 57: Duplicate key name
'REG_PATH_IND_BY_PATH_VALUE'*

This issue occurs when you try to install Stratos for the second time
since database values are already there. Ideally clean.sh should delete the
database. If databases are not cleaned correctly by clean.sh it is a bug.
Please create a jira and report it. Before that try following and check
whether databases are deleted

./clean.sh -udb_username -pdb_pass or
./clean.sh -u db_username -p db_pass .
(Please mind the space in second option)

Installer scripts are not tested very much in MAC environment as per my
knowledge. It is highly appreciated if you can add your finding (installer
scripts for MAC) to Stratos. It will be helpful for future MAC users.

We also followed the apache stratos wiki [3].
Please provide a direction to proceed from here.

*Note*: *earlier setup.sh file gave an error saying,*
sed: illegal option --r
*Then the shell script was changed accordingly[2].*
*Please note that we are using Mac OSX 10.9.4*

*Then again an error appeared stating -i switch is not supported.*

*Therefore the following shell script files were modified removing -i
switch.*
*ec2.sh*
*openstack.sh*
*setup.sh*
*setup.conf*

sed -i pattern file will modify the original file which you can
achieve the same as below without -i option
sed pattern filefile

*Scripts are attached for reference. *

[1]

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi Manula,

FYI

In mac when we run mysql -u $mysql_user -p$mysql_pass -e DROP DATABASE IF
EXISTS $userstore_db_schema;  it works without any issue. we will debug
the shell script and let you know.

mysql show databases;

+-+

| Database|

+-+

| information_schema  |

| USERSTORE_DB_SCHEMA |

| mysql   |

| performance_schema  |

| test|

+-+

5 rows in set (0.00 sec)


mysql exit

Bye

Thusharas-MacBook-Pro:~ thushara$ mysql -u root -ppassword -e DROP
DATABASE IF EXISTS USERSTORE_DB_SCHEMA;

Warning: Using a password on the command line interface can be insecure.

Thusharas-MacBook-Pro:~ thushara$ mysql

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 28

Server version: 5.6.20 MySQL Community Server (GPL)


Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.


Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.


Type 'help;' or '\h' for help. Type '\c' to clear the current input
statement.


mysql show databases;

++

| Database   |

++

| information_schema |

| mysql  |

| performance_schema |

| test   |

++

4 rows in set (0.00 sec)



On Wed, Sep 17, 2014 at 2:41 PM, Manula Chathurika Thantriwatte 
manu...@wso2.com wrote:

 Hi Suhan,

 Can you please debug and see the username and the password is actually
 there in the database cleanup function. You can simply use echo statement
 inside the drop database function and verify that. clean.sh script work
 perfectly in ubuntu. I'm not sure is there any impact on MAC.

 Thanks !


 On Wed, Sep 17, 2014 at 2:29 PM, Suhan Dharmasuriya suh...@wso2.com
 wrote:

 Hi Manula,

 Nirmal, Thushara and I did try running clean.sh script but had no luck.
 Sample output is as follows.
 Note that mysql root password is 'pass'.
 Suhans-MacBook-Pro:stratos-installer suhanr$ sudo ./clean.sh -u root -p
 pass
 Please confirm that you want to remove stratos databases, servers and
 logs [y/n] y
 Stopping all java processes
 No matching processes were found
 Waiting for applications to exit
 Removing userstore database
 Warning: Using a password on the command line interface can be insecure.
 Removing Stratos
 Removing logs
 Suhans-MacBook-Pro:stratos-installer suhanr$

 According to the mysql server output the database is still there.
 mysql show databases;
 +-+
 | Database|
 +-+
 | information_schema  |
 | USERSTORE_DB_SCHEMA |
 | mysql   |
 | performance_schema  |
 | test|
 +-+
 5 rows in set (0.00 sec)

 mysql show databases;
 +-+
 | Database|
 +-+
 | information_schema  |
 | USERSTORE_DB_SCHEMA |
 | mysql   |
 | performance_schema  |
 | test|
 +-+
 5 rows in set (0.00 sec)

 Thanks,
 Suhan

 On Wed, Sep 17, 2014 at 1:38 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 HI,

 The sed issue came to me also.  I modifed the scripts and changed all
 sed to gsed.


 On Wed, Sep 17, 2014 at 12:52 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi,

 The $subject error occurs because in the first time the script fails,
 and at that time it already create the database. Since you didn't run the
 clean.sh databases are already in the environment. After you run the
 setup.sh in second time you will get the $subject error.

 Thanks !


 On Wed, Sep 17, 2014 at 12:46 PM, Thushara Ranawaka thusha...@wso2.com
  wrote:

 Hi Udara,
 Yes, We will do the needful.

 Thanks,
 Thushara.

 On Wed, Sep 17, 2014 at 12:43 PM, Udara Liyanage ud...@wso2.com
 wrote:



 On Wed, Sep 17, 2014 at 12:16 PM, Suhan Dharmasuriya suh...@wso2.com
  wrote:

 Thanks Lasindu,

 Thushara and I are in the process of modifying the shell scripts
 suitable for osx.
 We contacted Nirmal, Lakmal, Waruna and Udara and had a quick
 discussion.

 After the discussion, the solution we found was to delete the
 USERSTORE_DB_SCHEMA database from mysql manually.

 As mentioned earlier, once $ sudo ./setup.sh -p default -s command
 is run we get the following error.
 outputEventAdaptor name=JMSOutputAdaptor statistics=disable
   trace=enable type=jms xmlns=
 http://wso2.org/carbon/eventadaptormanager;
   !--property
 name=java.naming.provider.urlCEP_HOME/repository/conf/jndi.properties/property--
   property name=java.naming.provider.urltcp://10.100.5.175:61616
 /property
   property
 name=java.naming.factory.initialorg.apache.activemq.jndi.ActiveMQInitialContextFactory/property
   property
 name=transport.jms.ConnectionFactoryJNDINameTopicConnectionFactory/property
   property name=transport.jms.DestinationTypetopic/property
 /outputEventAdaptor
 End configuring the Complex Event

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi,

Issue was the database name.
I did the following changes in the setup.conf and now clean.sh is working
properly.

# export userstore_db_schema=userstore
export userstore_db_schema=USERSTORE_DB_SCHEMA # for mac osx

Is there any issue or conflict in above setup?

Thanks,
Thushara

On Wed, Sep 17, 2014 at 2:50 PM, Thushara Ranawaka thusha...@wso2.com
wrote:

 Hi Manula,

 FYI

 In mac when we run mysql -u $mysql_user -p$mysql_pass -e DROP DATABASE
 IF EXISTS $userstore_db_schema;  it works without any issue. we will
 debug the shell script and let you know.

 mysql show databases;

 +-+

 | Database|

 +-+

 | information_schema  |

 | USERSTORE_DB_SCHEMA |

 | mysql   |

 | performance_schema  |

 | test|

 +-+

 5 rows in set (0.00 sec)


 mysql exit

 Bye

 Thusharas-MacBook-Pro:~ thushara$ mysql -u root -ppassword -e DROP
 DATABASE IF EXISTS USERSTORE_DB_SCHEMA;

 Warning: Using a password on the command line interface can be insecure.

 Thusharas-MacBook-Pro:~ thushara$ mysql

 Welcome to the MySQL monitor.  Commands end with ; or \g.

 Your MySQL connection id is 28

 Server version: 5.6.20 MySQL Community Server (GPL)


 Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights
 reserved.


 Oracle is a registered trademark of Oracle Corporation and/or its

 affiliates. Other names may be trademarks of their respective

 owners.


 Type 'help;' or '\h' for help. Type '\c' to clear the current input
 statement.


 mysql show databases;

 ++

 | Database   |

 ++

 | information_schema |

 | mysql  |

 | performance_schema |

 | test   |

 ++

 4 rows in set (0.00 sec)



 On Wed, Sep 17, 2014 at 2:41 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi Suhan,

 Can you please debug and see the username and the password is actually
 there in the database cleanup function. You can simply use echo statement
 inside the drop database function and verify that. clean.sh script work
 perfectly in ubuntu. I'm not sure is there any impact on MAC.

 Thanks !


 On Wed, Sep 17, 2014 at 2:29 PM, Suhan Dharmasuriya suh...@wso2.com
 wrote:

 Hi Manula,

 Nirmal, Thushara and I did try running clean.sh script but had no luck.
 Sample output is as follows.
 Note that mysql root password is 'pass'.
 Suhans-MacBook-Pro:stratos-installer suhanr$ sudo ./clean.sh -u root -p
 pass
 Please confirm that you want to remove stratos databases, servers and
 logs [y/n] y
 Stopping all java processes
 No matching processes were found
 Waiting for applications to exit
 Removing userstore database
 Warning: Using a password on the command line interface can be insecure.
 Removing Stratos
 Removing logs
 Suhans-MacBook-Pro:stratos-installer suhanr$

 According to the mysql server output the database is still there.
 mysql show databases;
 +-+
 | Database|
 +-+
 | information_schema  |
 | USERSTORE_DB_SCHEMA |
 | mysql   |
 | performance_schema  |
 | test|
 +-+
 5 rows in set (0.00 sec)

 mysql show databases;
 +-+
 | Database|
 +-+
 | information_schema  |
 | USERSTORE_DB_SCHEMA |
 | mysql   |
 | performance_schema  |
 | test|
 +-+
 5 rows in set (0.00 sec)

 Thanks,
 Suhan

 On Wed, Sep 17, 2014 at 1:38 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 HI,

 The sed issue came to me also.  I modifed the scripts and changed all
 sed to gsed.


 On Wed, Sep 17, 2014 at 12:52 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi,

 The $subject error occurs because in the first time the script fails,
 and at that time it already create the database. Since you didn't run the
 clean.sh databases are already in the environment. After you run the
 setup.sh in second time you will get the $subject error.

 Thanks !


 On Wed, Sep 17, 2014 at 12:46 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Udara,
 Yes, We will do the needful.

 Thanks,
 Thushara.

 On Wed, Sep 17, 2014 at 12:43 PM, Udara Liyanage ud...@wso2.com
 wrote:



 On Wed, Sep 17, 2014 at 12:16 PM, Suhan Dharmasuriya 
 suh...@wso2.com wrote:

 Thanks Lasindu,

 Thushara and I are in the process of modifying the shell scripts
 suitable for osx.
 We contacted Nirmal, Lakmal, Waruna and Udara and had a quick
 discussion.

 After the discussion, the solution we found was to delete the
 USERSTORE_DB_SCHEMA database from mysql manually.

 As mentioned earlier, once $ sudo ./setup.sh -p default -s command
 is run we get the following error.
 outputEventAdaptor name=JMSOutputAdaptor statistics=disable
   trace=enable type=jms xmlns=
 http://wso2.org/carbon/eventadaptormanager;
   !--property
 name=java.naming.provider.urlCEP_HOME/repository/conf

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

Hi Manula,
Yes it is.


On Wed, Sep 17, 2014 at 3:18 PM, Manula Chathurika Thantriwatte 
manu...@wso2.com wrote:

 Hi,

 It might be a problem. Then it create the database as
 USERSTORE_DB_SCHEMA. Isn't it ?

 On Wed, Sep 17, 2014 at 3:10 PM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi,

 Issue was the database name.
 I did the following changes in the setup.conf and now clean.sh is working
 properly.

 # export userstore_db_schema=userstore
 export userstore_db_schema=USERSTORE_DB_SCHEMA # for mac osx

 Is there any issue or conflict in above setup?

 Thanks,
 Thushara

 On Wed, Sep 17, 2014 at 2:50 PM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi Manula,

 FYI

 In mac when we run mysql -u $mysql_user -p$mysql_pass -e DROP DATABASE
 IF EXISTS $userstore_db_schema;  it works without any issue. we will
 debug the shell script and let you know.

 mysql show databases;

 +-+

 | Database|

 +-+

 | information_schema  |

 | USERSTORE_DB_SCHEMA |

 | mysql   |

 | performance_schema  |

 | test|

 +-+

 5 rows in set (0.00 sec)


 mysql exit

 Bye

 Thusharas-MacBook-Pro:~ thushara$ mysql -u root -ppassword -e DROP
 DATABASE IF EXISTS USERSTORE_DB_SCHEMA;

 Warning: Using a password on the command line interface can be insecure.

 Thusharas-MacBook-Pro:~ thushara$ mysql

 Welcome to the MySQL monitor.  Commands end with ; or \g.

 Your MySQL connection id is 28

 Server version: 5.6.20 MySQL Community Server (GPL)


 Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights
 reserved.


 Oracle is a registered trademark of Oracle Corporation and/or its

 affiliates. Other names may be trademarks of their respective

 owners.


 Type 'help;' or '\h' for help. Type '\c' to clear the current input
 statement.


 mysql show databases;

 ++

 | Database   |

 ++

 | information_schema |

 | mysql  |

 | performance_schema |

 | test   |

 ++

 4 rows in set (0.00 sec)



 On Wed, Sep 17, 2014 at 2:41 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi Suhan,

 Can you please debug and see the username and the password is actually
 there in the database cleanup function. You can simply use echo statement
 inside the drop database function and verify that. clean.sh script work
 perfectly in ubuntu. I'm not sure is there any impact on MAC.

 Thanks !


 On Wed, Sep 17, 2014 at 2:29 PM, Suhan Dharmasuriya suh...@wso2.com
 wrote:

 Hi Manula,

 Nirmal, Thushara and I did try running clean.sh script but had no luck.
 Sample output is as follows.
 Note that mysql root password is 'pass'.
 Suhans-MacBook-Pro:stratos-installer suhanr$ sudo ./clean.sh -u root
 -p pass
 Please confirm that you want to remove stratos databases, servers and
 logs [y/n] y
 Stopping all java processes
 No matching processes were found
 Waiting for applications to exit
 Removing userstore database
 Warning: Using a password on the command line interface can be
 insecure.
 Removing Stratos
 Removing logs
 Suhans-MacBook-Pro:stratos-installer suhanr$

 According to the mysql server output the database is still there.
 mysql show databases;
 +-+
 | Database|
 +-+
 | information_schema  |
 | USERSTORE_DB_SCHEMA |
 | mysql   |
 | performance_schema  |
 | test|
 +-+
 5 rows in set (0.00 sec)

 mysql show databases;
 +-+
 | Database|
 +-+
 | information_schema  |
 | USERSTORE_DB_SCHEMA |
 | mysql   |
 | performance_schema  |
 | test|
 +-+
 5 rows in set (0.00 sec)

 Thanks,
 Suhan

 On Wed, Sep 17, 2014 at 1:38 PM, Prasanna Dangalla prasa...@wso2.com
 wrote:

 HI,

 The sed issue came to me also.  I modifed the scripts and changed all
 sed to gsed.


 On Wed, Sep 17, 2014 at 12:52 PM, Manula Chathurika Thantriwatte 
 manu...@wso2.com wrote:

 Hi,

 The $subject error occurs because in the first time the script
 fails, and at that time it already create the database. Since you didn't
 run the clean.sh databases are already in the environment. After you run
 the setup.sh in second time you will get the $subject error.

 Thanks !


 On Wed, Sep 17, 2014 at 12:46 PM, Thushara Ranawaka 
 thusha...@wso2.com wrote:

 Hi Udara,
 Yes, We will do the needful.

 Thanks,
 Thushara.

 On Wed, Sep 17, 2014 at 12:43 PM, Udara Liyanage ud...@wso2.com
 wrote:



 On Wed, Sep 17, 2014 at 12:16 PM, Suhan Dharmasuriya 
 suh...@wso2.com wrote:

 Thanks Lasindu,

 Thushara and I are in the process of modifying the shell scripts
 suitable for osx.
 We contacted Nirmal, Lakmal, Waruna and Udara and had a quick
 discussion.

 After the discussion, the solution we found was to delete the
 USERSTORE_DB_SCHEMA database from mysql manually.

 As mentioned earlier

Re: [Dev] Apache Stratos configuration - Duplicate key name 'REG_PATH_IND_BY_PATH_VALUE'

2014-09-16 Thread Thushara Ranawaka

Hi,
FYI
For mac osx it is illegal to use sed -r. As per a work around solution we
use -E instead of -r.

We used apache-stratos-4.0.0 version.

Thanks

On Tue, Sep 16, 2014 at 3:55 PM, Suhan Dharmasuriya suh...@wso2.com wrote:

 Hi,

 Myself and Thushara were following the tutorial [1] installing apache
 Stratos and came to the following section.

- Run the stratos-setup.sh file as the root.

 $ sudo ./setup.sh -p default

 After running the command we got the following error in our mac book pros.
 Detail terminal output is attached in the mail for reference.

 /WSO2/Products/stratos/opt/stratos-installer
 Warning: Using a password on the command line interface can be insecure.
 *ERROR 1061 (42000) at line 57: Duplicate key name
 'REG_PATH_IND_BY_PATH_VALUE'*

 We also followed the apache stratos wiki [3].
 Please provide a direction to proceed from here.

 *Note*: *earlier setup.sh file gave an error saying,*
 sed: illegal option --r
 *Then the shell script was changed accordingly[2].*
 *Please note that we are using Mac OSX 10.9.4*

 *Then again an error appeared stating -i switch is not supported.*

 *Therefore the following shell script files were modified removing -i
 switch.*
 *ec2.sh*
 *openstack.sh*
 *setup.sh*
 *setup.conf*

 *Scripts are attached for reference. *

 [1]
 http://blog.ravihansa3000.com/2014/04/installing-apache-stratos-40-with.html
 [2] http://www.flashesofpanic.com/panic/002596.php
 [3]
 https://cwiki.apache.org/confluence/display/STRATOS/4.0.0+Cloud+Controller+Configuration

 Thanks,
 Suhan and Thushara
 --
 Suhan Dharmasuriya
 Software Engineer - Test Automation

 *WSO2, Inc. *

 lean . enterprise . middleware
 Tel: +94 112 145345
 Mob: +94 779 869138
 Blog: http://suhancoold.blogspot.com/




-- 
Thushara Kasun Ranawaka
Software Engineer
WSO2 Inc.; http://www.wso2.com
lean.enterprise.middleware
Mobile : *+94 (0) 773438949*
*thusha...@wso2.com thusha...@wso2.com*
___
Dev mailing list
Dev@wso2.org
http://wso2.org/cgi-bin/mailman/listinfo/dev

Re: [Dev] BAM 4.2.2 build failed [Failure to find org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009]

2014-09-08 Thread Thushara Ranawaka

Thank you Maninda and Manoj.,.

On Fri, Sep 5, 2014 at 6:57 PM, Manoj Kumara ma...@wso2.com wrote:

 Hi Thushara,

 Since patch0009 is not yet released it is not deployed to nexus repo. Due
 to that reason you may need to build it locally.

 Thanks,
 Manoj


 *Manoj Kumara*
 Software Engineer
 WSO2 Inc. http://wso2.com/
 *lean.enterprise.middleware*
 Mobile: +94713448188


 On Fri, Sep 5, 2014 at 3:57 AM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi,

 While building BAM 2.4.2 (in turing branch) I overcome a build failure.
 Kindly find the mvn error log Im getting below. I googled this error and
 found a resource in wso2 oxygen tank[1]. as per that solution I cant find
 Kernel patch 0009 (org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009). Where
 could i find it?. Can someone help me?

 [1]
 http://wso2-oxygen-tank.10903.n7.nabble.com/Dev-BAM-4-2-1-build-failed-td93488.html

 Thanx

 [ERROR] Failed to execute goal
 org.apache.maven.plugins:maven-dependency-plugin:2.0-alpha-4:unpack
 (2-unpack-kernel-patch) on project wso2bam-p2-profile-gen: Unable to find
 artifact. Failure to find org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009
 in http://maven.wso2.org/nexus/content/groups/wso2-public/ was cached in
 the local repository, resolution will not be reattempted until the update
 interval of wso2-nexus has elapsed or updates are forced

 [ERROR]

 [ERROR] Try downloading the file manually from the project website.

 [ERROR]

 [ERROR] Then, install it using the command:

 [ERROR] mvn install:install-file -DgroupId=org.wso2.carbon
 -DartifactId=WSO2-CARBON-PATCH-4.2.0 -Dversion=0009 -Dpackaging=zip
 -Dfile=/path/to/file

 [ERROR]

 [ERROR] Alternatively, if you host your own repository you can deploy the
 file there:

 [ERROR] mvn deploy:deploy-file -DgroupId=org.wso2.carbon
 -DartifactId=WSO2-CARBON-PATCH-4.2.0 -Dversion=0009 -Dpackaging=zip
 -Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id]

 [ERROR]

 [ERROR]

 [ERROR] org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009

 [ERROR]

 [ERROR] from the specified remote repositories:

 [ERROR] wso2-nexus (
 http://maven.wso2.org/nexus/content/groups/wso2-public/, releases=true,
 snapshots=true),

 [ERROR] central (http://repo.maven.apache.org/maven2, releases=true,
 snapshots=false)

 [ERROR] - [Help 1]

 org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute
 goal org.apache.maven.plugins:maven-dependency-plugin:2.0-alpha-4:unpack
 (2-unpack-kernel-patch) on project wso2bam-p2-profile-gen: Unable to find
 artifact.

 at
 org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:217)

 at
 org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153)

 at
 org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145)

 at
 org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:84)

 at
 org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:59)

 at
 org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter.java:183)

 at
 org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161)

 at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:320)

 at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156)

 at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537)

 at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196)

 at org.apache.maven.cli.MavenCli.main(MavenCli.java:141)

 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

 at
 sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

 at
 sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

 at java.lang.reflect.Method.invoke(Method.java:601)

 at
 org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290)

 at
 org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230)

 at
 org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409)

 at
 org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352)

 Caused by: org.apache.maven.plugin.MojoExecutionException: Unable to find
 artifact.

 at
 org.apache.maven.plugin.dependency.fromConfiguration.AbstractFromConfigurationMojo.getArtifact(AbstractFromConfigurationMojo.java:250)

 at
 org.apache.maven.plugin.dependency.fromConfiguration.AbstractFromConfigurationMojo.getProcessedArtifactItems(AbstractFromConfigurationMojo.java:146)

 at
 org.apache.maven.plugin.dependency.fromConfiguration.UnpackMojo.execute(UnpackMojo.java:67)

 at
 org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.java:101)

 at
 org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:209)

 ... 19 more

 Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
 Failure to find org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009 in
 http

[Dev] BAM 4.2.2 build failed [Failure to find org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009]

2014-09-05 Thread Thushara Ranawaka

Hi,

While building BAM 2.4.2 (in turing branch) I overcome a build failure.
Kindly find the mvn error log Im getting below. I googled this error and
found a resource in wso2 oxygen tank[1]. as per that solution I cant find
Kernel patch 0009 (org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009). Where
could i find it?. Can someone help me?

[1]
http://wso2-oxygen-tank.10903.n7.nabble.com/Dev-BAM-4-2-1-build-failed-td93488.html

Thanx

[ERROR] Failed to execute goal
org.apache.maven.plugins:maven-dependency-plugin:2.0-alpha-4:unpack
(2-unpack-kernel-patch) on project wso2bam-p2-profile-gen: Unable to find
artifact. Failure to find org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009
in http://maven.wso2.org/nexus/content/groups/wso2-public/ was cached in
the local repository, resolution will not be reattempted until the update
interval of wso2-nexus has elapsed or updates are forced

[ERROR]

[ERROR] Try downloading the file manually from the project website.

[ERROR]

[ERROR] Then, install it using the command:

[ERROR] mvn install:install-file -DgroupId=org.wso2.carbon
-DartifactId=WSO2-CARBON-PATCH-4.2.0 -Dversion=0009 -Dpackaging=zip
-Dfile=/path/to/file

[ERROR]

[ERROR] Alternatively, if you host your own repository you can deploy the
file there:

[ERROR] mvn deploy:deploy-file -DgroupId=org.wso2.carbon
-DartifactId=WSO2-CARBON-PATCH-4.2.0 -Dversion=0009 -Dpackaging=zip
-Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id]

[ERROR]

[ERROR]

[ERROR] org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009

[ERROR]

[ERROR] from the specified remote repositories:

[ERROR] wso2-nexus (http://maven.wso2.org/nexus/content/groups/wso2-public/,
releases=true, snapshots=true),

[ERROR] central (http://repo.maven.apache.org/maven2, releases=true,
snapshots=false)

[ERROR] - [Help 1]

org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute
goal org.apache.maven.plugins:maven-dependency-plugin:2.0-alpha-4:unpack
(2-unpack-kernel-patch) on project wso2bam-p2-profile-gen: Unable to find
artifact.

at
org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:217)

at
org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153)

at
org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145)

at
org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:84)

at
org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:59)

at
org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter.java:183)

at
org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161)

at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:320)

at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156)

at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537)

at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196)

at org.apache.maven.cli.MavenCli.main(MavenCli.java:141)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

at java.lang.reflect.Method.invoke(Method.java:601)

at
org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290)

at
org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230)

at
org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409)

at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352)

Caused by: org.apache.maven.plugin.MojoExecutionException: Unable to find
artifact.

at
org.apache.maven.plugin.dependency.fromConfiguration.AbstractFromConfigurationMojo.getArtifact(AbstractFromConfigurationMojo.java:250)

at
org.apache.maven.plugin.dependency.fromConfiguration.AbstractFromConfigurationMojo.getProcessedArtifactItems(AbstractFromConfigurationMojo.java:146)

at
org.apache.maven.plugin.dependency.fromConfiguration.UnpackMojo.execute(UnpackMojo.java:67)

at
org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.java:101)

at
org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:209)

... 19 more

Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException:
Failure to find org.wso2.carbon:WSO2-CARBON-PATCH-4.2.0:zip:0009 in
http://maven.wso2.org/nexus/content/groups/wso2-public/ was cached in the
local repository, resolution will not be reattempted until the update
interval of wso2-nexus has elapsed or updates are forced


Try downloading the file manually from the project website.


Then, install it using the command:

mvn install:install-file -DgroupId=org.wso2.carbon
-DartifactId=WSO2-CARBON-PATCH-4.2.0 -Dversion=0009 -Dpackaging=zip
-Dfile=/path/to/file


Alternatively, if you host your own repository you can deploy the file
there:

mvn deploy:deploy-file

Re: [Dev] WSO2 Committers += Rajith Vitharana

2014-08-31 Thread Thushara Ranawaka

Congrats Rajith Aiya!


On Mon, Sep 1, 2014 at 9:44 AM, Praneesha Chandrasiri pranee...@wso2.com
wrote:

 Congrats!!!


 On Mon, Sep 1, 2014 at 9:38 AM, Suhan Dharmasuriya suh...@wso2.com
 wrote:

 Congrats Rajith!


 On Mon, Sep 1, 2014 at 9:25 AM, Dumidu Handakumbura dum...@wso2.com
 wrote:

 Congrats Rajith..


 On Mon, Sep 1, 2014 at 7:56 AM, Yasassri Ratnayake yasas...@wso2.com
 wrote:

 Congrats Rajith!!!


 On Mon, Sep 1, 2014 at 7:44 AM, Jenananthan Yogendran 
 jenanant...@wso2.com wrote:

 congrats Rajith


 On Fri, Aug 29, 2014 at 5:10 PM, Abimaran Kugathasan 
 abima...@wso2.com wrote:

 Congrats Rajith!


 On Fri, Aug 29, 2014 at 8:41 AM, Lakshman Udayakantha 
 lakshm...@wso2.com wrote:

 congratulations rajith...!!


 On Fri, Aug 29, 2014 at 8:35 AM, Niranda Perera nira...@wso2.com
 wrote:

 Congrats Rajith!


 On Fri, Aug 29, 2014 at 7:33 AM, Manoj Kumara ma...@wso2.com
 wrote:

 Congratulations Rajith !!!


 *Manoj Kumara*
 Software Engineer
 WSO2 Inc. http://wso2.com/
 *lean.enterprise.middleware*
 Mobile: +94713448188


 On Thu, Aug 28, 2014 at 10:00 PM, Dakshika Jayathilaka 
 daksh...@wso2.com wrote:

 Congratulations Rajith...!!!

 *Dakshika Jayathilaka*
 Software Engineer
 WSO2, Inc.
 lean.enterprise.middleware
 0771100911


 On Fri, Aug 29, 2014 at 1:51 AM, Sewwandi Perera 
 sewwa...@wso2.com wrote:

 Congratulations Rajith...!!!


 On Fri, Aug 29, 2014 at 7:07 AM, Isura Karunaratne 
 is...@wso2.com wrote:

 Congratz Rajith !!


 On Thursday, August 28, 2014, Gimantha Bandara 
 giman...@wso2.com wrote:

 Congratz Rajith!


 On Thu, Aug 28, 2014 at 10:42 PM, Harsha Kumara 
 hars...@wso2.com wrote:

 Congratz Rajith!


 On Thu, Aug 28, 2014 at 10:31 PM, Thanuja Jayasinghe 
 than...@wso2.com wrote:

 Congratz rajith.!!!
 On 28 Aug 2014 22:24, Anjana Fernando anj...@wso2.com
 wrote:

  Hi,

 It's my pleasure to announce Rajith Vitharana as a WSO2
 committer. Rajith has done many valuable contributions to BAM 
 and the DSS
 products. Welcome aboard and keep up the good work! ..

 Cheers,
 Anjana.
 --
 *Anjana Fernando*
 Senior Technical Lead
 WSO2 Inc. | http://wso2.com
 lean . enterprise . middleware

 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev


 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Harsha Kumara
 Software Engineer, WSO2 Inc.
 Mobile: +94775505618
 Blog:harshcreationz.blogspot.com

 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Gimantha Bandara
 Software Engineer
 WSO2. Inc : http://wso2.com
 Mobile : +94714961919



 --
 Isura Dilhara Karunaratne
 Software Engineer

 Mob +94 772 254 810



 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Sewwandi Perera
 Software Engineer

 WSO2 Inc.; http://wso2.com
 lean.enterprise.middleware

 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev



 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev



 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 *Niranda Perera*
 Software Engineer, WSO2 Inc.
 Mobile: +94-71-554-8430
 Twitter: @n1r44 https://twitter.com/N1R44

 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Lakshman Udayakantha
 Software Engineer, WSO2
 Mobile: *0711241005*

 *lakshm...@wso2.com lakshm...@wso2.com *


 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Thanks
 Abimaran Kugathasan

 Software Engineer | WSO2 Inc
 Data  APIs Technologies Team
 Mobile : +94 77 1708229

 http://stackoverflow.com/users/515034
 http://lk.linkedin.com/in/abimaran
 http://www.lkabimaran.blogspot.com/  https://github.com/abimaran
 https://twitter.com/abimaran


 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Jenananthan Yogendran
 *Software Engineer,*
 *WSO2 inc., http://wso2.com http://wso2.com*


 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 Yasassri Ratnayake
 Software Engineer - QA
 WSO2 Inc ; http://wso2.com
 lean.enterprise.middleware
 *Mobile : +94715933168 %2B94715933168*
 *Blog : http://yasassriratnayake.blogspot.com/
 http://yasassriratnayake.blogspot.com/*

 ___
 Dev mailing list
 Dev@wso2.org
 http://wso2.org/cgi-bin/mailman/listinfo/dev




 --
 *Dumidu Handakumbura*

Re: [Dev] Writing WSO2 carbon component - stub generation error

]

[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Changes detected - recompiling the module!

[INFO] Compiling 1 source file to
/Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target/test-classes

[INFO]

[INFO] --- maven-surefire-plugin:2.17:test (default-test) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Surefire report directory:
/Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target/surefire-reports


---

 T E S T S

---

Running org.org.wso2.carbon.student.mgt.stub.AppTest

Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.001 sec -
in org.org.wso2.carbon.student.mgt.stub.AppTest


Results :


Tests run: 1, Failures: 0, Errors: 0, Skipped: 0


[INFO]

[INFO] --- maven-bundle-plugin:2.5.0:bundle (default-bundle) @
org.wso2.carbon.student.mgt.stub ---

[WARNING] Bundle
org.wso2.carbon:org.wso2.carbon.student.mgt.stub:bundle:4.2.0 : Unused
Export-Package instructions: [org.wso2.carbon.student.mgt.*]

[INFO]

[INFO] --- maven-install-plugin:2.5.1:install (default-install) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Installing
/Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target/org.wso2.carbon.student.mgt.stub-4.2.0.jar
to
/Users/thushara/.m2/repository/org/wso2/carbon/org.wso2.carbon.student.mgt.stub/4.2.0/org.wso2.carbon.student.mgt.stub-4.2.0.jar

[INFO] Installing
/Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/pom.xml
to
/Users/thushara/.m2/repository/org/wso2/carbon/org.wso2.carbon.student.mgt.stub/4.2.0/org.wso2.carbon.student.mgt.stub-4.2.0.pom

[INFO]

[INFO] --- maven-bundle-plugin:2.5.0:install (default-install) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Installing
org/wso2/carbon/org.wso2.carbon.student.mgt.stub/4.2.0/org.wso2.carbon.student.mgt.stub-4.2.0.jar

[INFO] Writing OBR metadata

[INFO]


[INFO] BUILD SUCCESS

[INFO]


[INFO] Total time: 8.935s

[INFO] Finished at: Mon Aug 25 12:14:50 IST 2014

[INFO] Final Memory: 17M/51M

[INFO]



On Mon, Aug 25, 2014 at 11:06 AM, Suhan Dharmasuriya suh...@wso2.com
wrote:

 Hi Rajith/Chamila/Thushara,

 Thanks a lot. It is working now. :)

 Thanks and Regards,
 Suhan


 On Mon, Aug 25, 2014 at 10:59 AM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Thanx rajith aiya.,.:) *now working


 On Mon, Aug 25, 2014 at 10:50 AM, Rajith Vitharana raji...@wso2.com
 wrote:

 Hi Suhan,Thushara,

 Add following repositories to the pom.xml file and build it again.

 repositories
 repository
 idwso2-nexus/id
 nameWSO2 internal Repository/name
 urlhttp://maven.wso2.org/nexus/content/groups/wso2-public/
 /url
 releases
 enabledtrue/enabled
 updatePolicydaily/updatePolicy
 checksumPolicyignore/checksumPolicy
 /releases
 /repository
 /repositories


 Thanks,


 On Mon, Aug 25, 2014 at 10:49 AM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 I got the same issue, Im attaching the full log trance and adding
 training mail group as well.
 Could somebody help us?

 Thusharas-MacBook-Pro:org.wso2.carbon.student.mgt.stub thushara$* mvn
 clean install -e*

 [INFO] Error stacktraces are turned on.

 [INFO] Scanning for projects...

 [WARNING]

 [WARNING] Some problems were encountered while building the effective
 model for org.wso2.carbon:org.wso2.carbon.student.mgt.stub:bundle:4.2.0

 [WARNING] 'build.plugins.plugin.version' for
 org.apache.felix:maven-bundle-plugin is missing. @ line 70, column 21

 [WARNING] 'build.plugins.plugin.version' for
 org.codehaus.mojo:build-helper-maven-plugin is missing. @ line 51, column 
 21

 [WARNING]

 [WARNING] It is highly recommended to fix these problems because they
 threaten the stability of your build.

 [WARNING]

 [WARNING] For this reason, future Maven versions might no longer
 support building such malformed projects.

 [WARNING]

 [INFO]


 [INFO]
 

 [INFO] Building org.wso2.carbon.student.mgt.stub 4.2.0

 [INFO]
 

 Downloading:
 https://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-antrun-plugin/1.1/maven-antrun-plugin-1.1.pom

 Downloaded:
 https://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-antrun-plugin/1.1/maven-antrun-plugin-1.1.pom
 (2 KB at 0.2 KB

[Dev] Writing WSO2 carbon component - stub generation error

Hi,

After adding the repository xml code to the stub pom.xml I got the
following log file which include a error message. Currently im using mvn
3.2.3 and i tried to get rid from the error by using mvn 3.0.5 but still it
prints the error log. I found a mail-archive[1] which include the same
error log as per the answer he has found including the axis2-client jar
dependency to pom.xml but i try to add above dependancy and fail. Can
someone help me on this.

*axis2-client dependency added to the stub pom.xml(which failed):-*

   *dependency*

*groupIdorg.apache.axis2.wso2/groupId*

*artifactIdaxis2-client/artifactId*

*version${axis2.client.version}/version*

* /dependency*

*Log:-*

Thusharas-MacBook-Pro:org.wso2.carbon.student.mgt.stub thushara$ mvn clean
install -e

[INFO] Error stacktraces are turned on.

[INFO] Scanning for projects...

[WARNING]

[WARNING] Some problems were encountered while building the effective model
for org.wso2.carbon:org.wso2.carbon.student.mgt.stub:bundle:4.2.0

[WARNING] 'build.plugins.plugin.version' for
org.apache.felix:maven-bundle-plugin is missing. @ line 70, column 21

[WARNING] 'build.plugins.plugin.version' for
org.codehaus.mojo:build-helper-maven-plugin is missing. @ line 51, column 21

[WARNING]

[WARNING] It is highly recommended to fix these problems because they
threaten the stability of your build.

[WARNING]

[WARNING] For this reason, future Maven versions might no longer support
building such malformed projects.

[WARNING]

[INFO]


[INFO]


[INFO] Building org.wso2.carbon.student.mgt.stub 4.2.0

[INFO]


Downloading:
http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom

Downloaded:
http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom
(5
KB at 2.9 KB/sec)

Downloading:
http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-plugins/18/maven-plugins-18.pom

Downloaded:
http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-plugins/18/maven-plugins-18.pom
(13
KB at 21.2 KB/sec)

Downloading:
http://repo.maven.apache.org/maven2/org/apache/maven/maven-parent/16/maven-parent-16.pom

Downloaded:
http://repo.maven.apache.org/maven2/org/apache/maven/maven-parent/16/maven-parent-16.pom
(23
KB at 26.1 KB/sec)

Downloading:
http://repo.maven.apache.org/maven2/org/apache/apache/7/apache-7.pom

Downloaded:
http://repo.maven.apache.org/maven2/org/apache/apache/7/apache-7.pom (15 KB
at 9.9 KB/sec)

Downloading:
http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.jar

Downloaded:
http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.jar
(23
KB at 24.4 KB/sec)

[INFO]

[INFO] --- maven-clean-plugin:2.4.1:clean (default-clean) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Deleting
/Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target

[INFO]

[INFO] --- build-helper-maven-plugin:1.9:add-source (add-source) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Source directory:
/Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target/generated-code/src
added.

[INFO]

[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Using 'UTF-8' encoding to copy filtered resources.

[INFO] Copying 1 resource

[INFO]

[INFO] --- maven-antrun-plugin:1.1:run (source-code-generation) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Executing tasks

 [java] Exception in thread main java.lang.NoClassDefFoundError:
javax/wsdl/WSDLException

 [java] at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)

 [java] at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)

 [java] Caused by: java.lang.ClassNotFoundException:
javax.wsdl.WSDLException

 [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:366)

 [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:355)

 [java] at java.security.AccessController.doPrivileged(Native Method)

 [java] at java.net.URLClassLoader.findClass(URLClassLoader.java:354)

 [java] at java.lang.ClassLoader.loadClass(ClassLoader.java:423)

 [java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)

 [java] at java.lang.ClassLoader.loadClass(ClassLoader.java:356)

 [java] ... 2 more

 [java] Java Result: 1

[INFO] Executed tasks

[INFO]

[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @
org.wso2.carbon.student.mgt.stub ---

[INFO] Changes detected - recompiling the module!

[INFO] Compiling 1 source file to

Re: [Dev] Writing WSO2 carbon component - stub generation error

Kindly fine the requested files.


On Mon, Aug 25, 2014 at 1:14 PM, Danushka Fernando danush...@wso2.com
wrote:

 Hi
 Can you add the pom.xml and the wsdl used for stub generation?

 Thanks  Regards
 Danushka Fernando
 Software Engineer
 WSO2 inc. http://wso2.com/
 Mobile : +94716332729


 On Mon, Aug 25, 2014 at 12:43 PM, Thushara Ranawaka thusha...@wso2.com
 wrote:

 Hi,

 After adding the repository xml code to the stub pom.xml I got the
 following log file which include a error message. Currently im using mvn
 3.2.3 and i tried to get rid from the error by using mvn 3.0.5 but still it
 prints the error log. I found a mail-archive[1] which include the same
 error log as per the answer he has found including the axis2-client jar
 dependency to pom.xml but i try to add above dependancy and fail. Can
 someone help me on this.

 *axis2-client dependency added to the stub pom.xml(which failed):-*

*dependency*

 *groupIdorg.apache.axis2.wso2/groupId*

 *artifactIdaxis2-client/artifactId*

 *version${axis2.client.version}/version*

 * /dependency*

 *Log:-*

 Thusharas-MacBook-Pro:org.wso2.carbon.student.mgt.stub thushara$ mvn
 clean install -e

 [INFO] Error stacktraces are turned on.

 [INFO] Scanning for projects...

 [WARNING]

 [WARNING] Some problems were encountered while building the effective
 model for org.wso2.carbon:org.wso2.carbon.student.mgt.stub:bundle:4.2.0

 [WARNING] 'build.plugins.plugin.version' for
 org.apache.felix:maven-bundle-plugin is missing. @ line 70, column 21

 [WARNING] 'build.plugins.plugin.version' for
 org.codehaus.mojo:build-helper-maven-plugin is missing. @ line 51, column 21

 [WARNING]

 [WARNING] It is highly recommended to fix these problems because they
 threaten the stability of your build.

 [WARNING]

 [WARNING] For this reason, future Maven versions might no longer support
 building such malformed projects.

 [WARNING]

 [INFO]


 [INFO]
 

 [INFO] Building org.wso2.carbon.student.mgt.stub 4.2.0

 [INFO]
 

 Downloading:
 http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom

 Downloaded:
 http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom
  (5
 KB at 2.9 KB/sec)

 Downloading:
 http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-plugins/18/maven-plugins-18.pom

 Downloaded:
 http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-plugins/18/maven-plugins-18.pom
  (13
 KB at 21.2 KB/sec)

 Downloading:
 http://repo.maven.apache.org/maven2/org/apache/maven/maven-parent/16/maven-parent-16.pom

 Downloaded:
 http://repo.maven.apache.org/maven2/org/apache/maven/maven-parent/16/maven-parent-16.pom
  (23
 KB at 26.1 KB/sec)

 Downloading:
 http://repo.maven.apache.org/maven2/org/apache/apache/7/apache-7.pom

 Downloaded:
 http://repo.maven.apache.org/maven2/org/apache/apache/7/apache-7.pom (15
 KB at 9.9 KB/sec)

 Downloading:
 http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.jar

 Downloaded:
 http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.jar
  (23
 KB at 24.4 KB/sec)

 [INFO]

 [INFO] --- maven-clean-plugin:2.4.1:clean (default-clean) @
 org.wso2.carbon.student.mgt.stub ---

 [INFO] Deleting
 /Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target

 [INFO]

 [INFO] --- build-helper-maven-plugin:1.9:add-source (add-source) @
 org.wso2.carbon.student.mgt.stub ---

 [INFO] Source directory:
 /Users/thushara/Documents/workspaceluna/student-manager/student-manager-components/org.wso2.carbon.student.mgt.stub/target/generated-code/src
 added.

 [INFO]

 [INFO] --- maven-resources-plugin:2.6:resources (default-resources) @
 org.wso2.carbon.student.mgt.stub ---

 [INFO] Using 'UTF-8' encoding to copy filtered resources.

 [INFO] Copying 1 resource

 [INFO]

 [INFO] --- maven-antrun-plugin:1.1:run (source-code-generation) @
 org.wso2.carbon.student.mgt.stub ---

 [INFO] Executing tasks

  [java] Exception in thread main java.lang.NoClassDefFoundError:
 javax/wsdl/WSDLException

  [java] at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)

  [java] at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)

  [java] Caused by: java.lang.ClassNotFoundException:
 javax.wsdl.WSDLException

  [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:366)

  [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:355)

  [java] at java.security.AccessController.doPrivileged(Native Method)

  [java] at java.net.URLClassLoader.findClass(URLClassLoader.java:354)

  [java] at java.lang.ClassLoader.loadClass

Re: [Dev] Writing WSO2 carbon component - stub generation error