[Dx4win] Ve7cc and P5??
When configuring VE7CC to allow spots to DX4WIN, I notice in the AS country list, there is no P5(VE7CC). Since P5 is so needed, why is it not there. Just curious. Or, is this a VE7CC question? Val N4RJ Get Free Email with Video Mail & Video Chat! http://www.juno.com/freeemail?refcd=JUTAGOUT1FREM0210 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Wish List - Spots
As stated earlier: I would like to see the ability to see only spots needed for band Challenge. In other words, If I have a band that has at least one mode confirmed, I would not see the Any mode spots for that band. This clutters up the DX Spots screen. So many of us are interested in the Challenge now. Once a Band country has been confirmed, I don't need to see additional spots for CW/Phone,etc...if I have that band country confirmed...excuse meEntity. Also, a combined startup for the Cluster Connect when DX4WIN is Opened would be very nice. I am not sure if it can be done in 8.05. Thanks to everyone who has made DX4WIN what it is today. I enjoy it and have become dependent upon its powers. 73 Val N4RJ The New "Skinny" Fruit How This Strange 62-Cent African Fruit Is Making Americans Skinny. http://thirdpartyoffers.juno.com/TGL3141/4ee343d0789169507d0st03vuc __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Challenge Spots
I surely am not a programmer, but would it be possible to link the "priority" through the Awards? Then you could set it up for any Awardsuch as the Challenge to accomplish this desired result. With the Challenge gaining in popularity ( Most "Old" Dxers have attained DXCC, WAS, WAZ, etc.) and since most are addicted with the incurable "Ham-O- Holic" Virus, and ARRL is linking the Challenge to LOTW...the numbers of Challenge Chasers is immense. This would be a great feature in DX4WIN. Thanks, Val N4RJ An Incurable Ham-0-Holic. I invented the term in the 60s. Andam the Poster Boy. -- Original Message -- From: "John, K9EL" To: "'Kostas Stamatis'" , "'REFLECTOR dx4win'" Subject: Re: [Dx4win] Challenge Spots Date: Mon, 7 Nov 2011 22:21:52 -0600 I would add my name to the list of requestors for the ability to change the order of priorities in Packet2. For example, I just started chasing RTTY countries, so that mode is not confirmed on any band with any country. But if a DX spot appears for a country that I have worked on one band, but not on another band, it still is always priority 4. Since I know it will be awhile before I get the confirmations, I would love to temporarily swap priority levels 4 and 5. 73, John K9EL -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas Stamatis Sent: Monday, November 07, 2011 10:33 AM To: REFLECTOR dx4win Subject: Re: [Dx4win] Challenge Spots Yes you have right. This way (deactivating ssb) you will not see an ssb qso you need for a band slot. I don't know a solution. I didn't undertand it ok. You want ssb qsos but only for new band slots not for new mode. Beside this the most important is that dx4win gives priority to the mode and not to the band. If a qso is new mode (ssb) and new band also, you will see new mode (not interesting for you) but there is no way to know that is a new band. So you need to change priorites. I don't think this can be done but it's useful for sure. Paul, can we define cluster priorities in the next version? For example if i need the new band to be number 2 and new mode a grey spot, etc... 73 Kostas sv1dpi > - Original Message - > From: "Hugh Valentine" > To: > Sent: Monday, November 07, 2011 2:34 PM > Subject: [Dx4win] Challenge Spots > > >>I have tried most everything I can think of to solve this, maybe someone >>can help me. >> >> I am interested in seeing only NEW or Unconfirmed Band spots in my Packet >> Screen window. >> >> Somehow I have not figured out how to do this. I keep getting new Band >> Mode Spots in with my "needed to confirm" Band spots for the Challenge. >> These clutter my screen as I am mostly CW and there are a lot of SSB >> (Mode)Spots coming through, event though I have confirmed the country on >> CW on that band. If it is a new Band country I need to work or confirm, >> I >> don't mind the Spot(Mode) as if I work it I get Challenge credit. >> >> How and can I accomplish this? >> >> Thanks for any insight. 73 >> Val >> N4RJ >> >> >> >> >> 53 Year Old Mom Looks 33 >> The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried >> http://thirdpartyoffers.juno.com/TGL3141/4eb7d0c2e4d4511b25c5st06vuc >> __ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:DX4WIN@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Penny Stock Jumping 3000% Sign up to the #1 voted penny stock newsletter for free today! http://thirdpartyoffers.juno.com/TGL3141/4eb925a35f5491210ca1st05vuc __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Challenge Spots
I have tried most everything I can think of to solve this, maybe someone can help me. I am interested in seeing only NEW or Unconfirmed Band spots in my Packet Screen window. Somehow I have not figured out how to do this. I keep getting new Band Mode Spots in with my "needed to confirm" Band spots for the Challenge. These clutter my screen as I am mostly CW and there are a lot of SSB (Mode)Spots coming through, event though I have confirmed the country on CW on that band. If it is a new Band country I need to work or confirm, I don't mind the Spot(Mode) as if I work it I get Challenge credit. How and can I accomplish this? Thanks for any insight. 73 Val N4RJ 53 Year Old Mom Looks 33 The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried http://thirdpartyoffers.juno.com/TGL3141/4eb7d0c2e4d4511b25c5st06vuc __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] ST0R Spots
I just noticed something. I saved the new country files right before ST0R was activated. Thanks Jim! When ST0R is spotted on a new Band, the spot shows as yellow on the Packet screen(New Country). And, obviously I have not confirmed the contact via QSL or LOTW. However, unlike every other country I have worked but not confirmed, which spots in red letters, My packet screen does not show spots of ST0R on any band on which I have previously made a QSO. Can anyone give me some reason for this? And how to correct? All other countries I have worked but not yet confirmed show in Red letters. Why not ST0R? the spot simply does not show. Thanks, Val N4RJ 57 Year Old Mom Looks 27! Mom Reveals $5 Wrinkle Trick That Has Angered Doctors! http://thirdpartyoffers.juno.com/TGL3141/4e393d85b80c538ea96st01vuc __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Radio Control works with N1MM, but not DX4WIN
Ft-920 Win 7 Baud and Com Port set at same for DX4WIN and N1MM. Radio does not track with DX4WIN. It will grab a spot from the band map. but when turning VFO or changing Bands, the Band Map will not move with the Radio. Winkeyer for CW. Keying fine in N1MM, But although the internal keyer in DX4WIN shows messages in it's window, the DX4WIN doesn't key the rig. Any suggestions? Any help appreciated. My already thinning hair is falling out with this. The DX4WIN tracking worked a few months ago. 73, Val N4RJ 57 Year Old Mom Looks 27! Mom Reveals $5 Wrinkle Trick That Has Angered Doctors! http://thirdpartyoffers.juno.com/TGL3141/4e20a6ae4417113c44st01vuc __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Changing the QSO date on a Contest weekend of Contacts????
I have located a log error. In the 1996 CQWW 160 contest, I must have introduced a one day error in my CT contest program. Most of the QSOs are one day early. For example, I have a lot of QSOs listed at Jan 25th when the contest didn't start until the 26thditto for the 26/27th. I have read and read but cannot find a way to isolate these dates and change all of them as a group rather as individual modification750 QSOs. I see where you can set up a Group...I Imagine that this is the route to take...That isset the 25th as a group, then change those dates up one day, etc. But i just cant seem to get this isolated. Is this possible to do, and could someone walk me through it? Thanks, Val N4RJ Car Insurance for $25/Mo? Overpaying for Insurance? Rates as low as $25/m. Free Quote instantly. http://thirdpartyoffers.juno.com/TGL3141/4bcce457cb677266cest05vuc __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Mystery-Lost confirmation on CW
I ran across something interesting and wonder if someone can tell me why it is happening? I have all countries confirmed on CW, except P5. My "Countries" window shows CP, Bolivia, confirmed on 15 CW. However, if I do a DXCC-CW-Needed search in Awards window, I get P5 and also CP listed as "needed", eventhough the logbook and countries window clearly shows CP confirmed. If I do a Logbook search querying in CP, CW, QSL/Conf as Y...I get a CP contact that fills the Log window. I have 15M...along with all bands 160-10 checked in Prefs. Also CW and SSB are my only Modes checked. Any ideas as to what is going on? Or, what to check or test to see why I have CP coming up as Needed when it is confirmed? Tnx and 73 Val Weight Loss Program Best Weight Loss Program - Click Here! http://thirdpartyoffers.juno.com/TGL2141/c?cp=MrLmoZWOQowoRtGZG3rB0gAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAAEUgA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Keying Lockdown Ver8.03
Observation: When first keying, after lockdownand Keyer is sending CQCQetc, but a steady Lockdown is in progress. I went to Settings in Keyer.watching voltage as holding at +6.6 V. When I select "Tune"nothing happens, but when I hit "stop", the voltage reverts back to -6.6V and the keying lock down stops. I can then select Tune and it tunes, Stop and it stops, controlling the voltages. The Keying program can actually manually interrupt. (But it does not interrupt the Lock down while the Keyer has been activated). Does this not isolate the problem to something within the Keyer alone? Val Home Improvement Projects Make your dream home a reality. Click here to find all your home improvement needs! http://thirdpartyoffers.juno.com/TGL2141/c?cp=b64Ckqnve3D2JDG4Tt1LGAAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAAShAA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Keying Issues-Voltage Comparisons
GUY,and others, I just finished measuring some voltages around the Keying transistor 2n, 1K resistor, and Pin 4 of USB serial plug. Key Up and Tune. Computer: Brand new HP Pavillion Vista 64 bit. Triplett Model 60 Volt-Ohm meter. Voltages measured against Ground(Pin 5) of Serial Line out of computer. Prolific USB/Serial-latest software to include Win Vista. I measured running N1MM Logger program and also DX4WIN Ver 8.03 ** Key UP.. N1MM(which keys rig perfectly): Pin 4 -6.6V Transistor Input -6.6V Transistor Output 0. V DX4WIN Pin 4 -6.6V Transistor Input -6.6V Transistor Output 0. V ^^^ KEY DOWN... N1MM Used both sending CW and TUNE Pin 4 +6. V Transistor Input +0.7V Transistor Output 0 Volts and Transistor is shorted to ground and keys rig. DX4WIN( Hit F1 on Keying Tab sending CQ) Pin 4 +6. V Transistor Input +0.7V Transistor Output 0 Volts and transistor is shorted to ground but does not send CW-It is continuous even though the keyer is sending/showing CQ CQ DE N4RJ, etc... - Using COM 4 4800 8 n 1 Under DX4WIN prefs, COM4, CW, None(for PTT) it doesnt matter if the radio is on or off, or any other variables are changed. it still keys continuous. Obviously the keying circuit is satisfactory. Something in DX4WIN is telling something in the computer to hold that keying circuit in a continuously keyed state. The open voltages are identical, the closed voltages are identical. It just doesnt go high and low in DX4WIN. Any ideas? Val N4RJ Nutrition Improve your career health. Click now to study nutrition! http://thirdpartyoffers.juno.com/TGL2141/c?cp=Z0R28hoFtYYWVUYxnP-zogAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAASQwA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Keying Issues
If possible, could those having the Key lock down on Ver 8.03 measure the voltages on either side of the keying Transistor, both Key up and during lock down? Please report this if you can. I am going to change resistance values associated with the resistor to see if this changes things. Thanks, Val N4RJ Senior Assisted Living Put your loved ones in good hands with quality senior assisted living. Click now! http://thirdpartyoffers.juno.com/TGL2141/c?cp=hM8tW2FdiO2uU2pXQyLD2AAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAASUQA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Keying "Lock down" issues
Quite a few of us are still dead in the water with the Keying issue Locking down in DX4WIN and can't get things running, and are struggling. Some have computer skills and background, some of us (Me for one) have little to none. Seems the people who are skilled have their programs running well and cannot duplicate our situation and, thus, cannot find our solutions. I have been in contact with several who are stuck, compared notes, and are trying to be a lucky Blind Hog and find the Acorn. I know I may be way off base, but I have looked in the "Drivers" folders in my setups and find different drivers. I have no idea of whether this is significant, just asking if someone else does, and if this is a possible problem or normal. I am listing the findings below found on my 2 computers. Windows Vista 64 bit Laptop-"Drivers" Ver8.03=TVicHW32.dll (Note: 32 not 64 in filename) PC running Vista 32 Bit-"Drivers" Ver8.03=LPTdriver Ver8.02=vichwll.sys and vichwll.vxd Ver7.05=vichwll.sys and vichwll.vxd I dont see any serial ports listed here, probably not supposed to be. Like I said, just grasping and I dont know anything about computer setups, this is a desperate observation and comparison. Is the 32.dll significant in a 64 bit Vista? Val N4RJ P.S. Anyone else who is having this problem, please email me at hsv...@juno.com, maybe we can compare notes. I already have K2DBK, N2WK, and W4ZGR. Small Business Tools Compete with the big boys. Click here to find products to benefit your business. http://thirdpartyoffers.juno.com/TGL2141/c?cp=U_06dGxzSD9KpZ44EUZ28QAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAARMQA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Fw: Re: Info on Setup
I have 2 computers, both Vista, one 32 and one 64 Bit. I used it on Ver 7.5 on the 32 Bit. I purchased a new 64 Bit Vista Laptop and Ver 8.03 at the same time and downloaded Ver 8.03 to both, keeping Ver 7.5 on one. Keying failed to work. I Uninstalled both Ver 8.03 and downloaded Ver 8.02. Still have keying problem using Ver 8.02 now. Dead in water. Computer works fine with keying circuit using N1MM program. Tried cutting my wrist, but all I had was an Electric Razor. Anyone have some Cyanide Capsules? Val -- Forwarded Message -- From: Mel To: Hugh Valentine , dx4win@mailman.qth.net Subject: Re: [Dx4win] Info on Setup Date: Sun, 31 Jan 2010 08:21:00 -0500 Just to confirm something Hugh. The issue that Jim is referring to was never reported with 8.02, only 8.03. Are you saying you have the same issue running 8.02? BTW, I tried to duplicate this problem on 4 different computers with .03 and it works fine... I think Paul and beta testers have tried it on more than a dozen. Hugh Valentine wrote: > I am at this point with Keying using DX4WIN program...(Keying via this Port > and Interface/Transistor works fine with N1MM.) > > I am measuring voltages at the Serial Port, pin 4 of the Keying line(also the > pin 7 of PTTdoes same. ( I have USB to Serial Cable through a box for > interface which houses two Transistor keying Circuits for CW and PTT. > Ports set properly...all I think are set within operating parameters. > > Symptom=Keying and or PTT Lines remain "Key down, continuous" when any > attempt to send CW via Com Port. (Also, software to USB/Serial cable is > latest and for Vista 32 and 64 bit...certified cable.) Radio is "On" mode > and connected to Ft-920 and CAT control is fully enabled and tracking. Poll > rate 5000ms( Changed from 500 to 5000 to see if matters-no changes) > > I measure voltage at Transistor input from the DB9 DTR line at 6.43 Volts Key > up. Once I send CW through the DX4WIN Keyer, the voltage goes to .4 Volts > and the Ft-920 keying line is sending one continuous note on cw and will not > let up unless you either exit the program and start over, or "Stop Radio". > When you select "Start Radio" again, the voltage goes back to 6.4 volts at > the Transistor(s) and radio. But, once you try to send CW through DX4 WIn > the keying is "key down" and holds until you select "Stop Radio/then Start > Radio". > > I cannot change any config in DX4WIN that will fix this. I have Uninstalled > 8.03 and Reinstalled 8.02. Still malfunctions. > > Any more thoughts?? I need some Rocket Scientist or Fortune Teller at > this juncture. > > Val > N4RJ > > > > > Hotel > Hotel pics, info and virtual tours. Click here to book a hotel online. > http://thirdpartyoffers.juno.com/TGL2141/c?cp=LR_5FkWG1ajm42OV0RSkLwAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAATRAA= > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Info on Setup
I am at this point with Keying using DX4WIN program...(Keying via this Port and Interface/Transistor works fine with N1MM.) I am measuring voltages at the Serial Port, pin 4 of the Keying line(also the pin 7 of PTTdoes same. ( I have USB to Serial Cable through a box for interface which houses two Transistor keying Circuits for CW and PTT. Ports set properly...all I think are set within operating parameters. Symptom=Keying and or PTT Lines remain "Key down, continuous" when any attempt to send CW via Com Port. (Also, software to USB/Serial cable is latest and for Vista 32 and 64 bit...certified cable.) Radio is "On" mode and connected to Ft-920 and CAT control is fully enabled and tracking. Poll rate 5000ms( Changed from 500 to 5000 to see if matters-no changes) I measure voltage at Transistor input from the DB9 DTR line at 6.43 Volts Key up. Once I send CW through the DX4WIN Keyer, the voltage goes to .4 Volts and the Ft-920 keying line is sending one continuous note on cw and will not let up unless you either exit the program and start over, or "Stop Radio". When you select "Start Radio" again, the voltage goes back to 6.4 volts at the Transistor(s) and radio. But, once you try to send CW through DX4 WIn the keying is "key down" and holds until you select "Stop Radio/then Start Radio". I cannot change any config in DX4WIN that will fix this. I have Uninstalled 8.03 and Reinstalled 8.02. Still malfunctions. Any more thoughts?? I need some Rocket Scientist or Fortune Teller at this juncture. Val N4RJ Hotel Hotel pics, info and virtual tours. Click here to book a hotel online. http://thirdpartyoffers.juno.com/TGL2141/c?cp=LR_5FkWG1ajm42OV0RSkLwAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAATRAA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Brain Damage
I think I have over radiated my brain from 54 years of Hamming. I am trying to get computer control for band changing, and CW keying going. I have built an interface box to do this using one USB to Serial cable on a Windows Vista 64 bit. I used my old keying interface I used to use on CT. I took an old serial cable to go from the box to the CAT interface. I have DX4WIN Ver 8.02 and also N1MM loaded on the computer. Facts: The interface, using COM4, will activate the CAT port on the FT-920 but the CW is a continuous Tone. The Interface will Key the CW in N1MM fine, but no CAT control. What is going on? Any Rocket builders or Techno dudes that can give me some insight so I can do CW and CAT control on both programs/N1MM and DX4WIN? I'm fried. Im using DX4WIN for Logging and Award control and general keying, and N1MM for contesting. Thanks for any insights. Val N4RJ Weight Loss Program Best Weight Loss Program - Click Here! http://thirdpartyoffers.juno.com/TGL2141/c?cp=7pzgSMkor0dGXIGUC8ksRwAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAAEUgA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Keying Rig with DX4WIN and USB
For those who are using the DX4WIN Keyer to Key your rigsAnd have newer computers that do not have LPT-1 ports, just USB How do you do it? I finally got a USB to Serial cable that would drive the Band Change on the FT-920, and now I am ready to Key the rig using DX4WIN. Thanks and HNY 73 Val N4RJ Weight Loss Program Best Weight Loss Program - Click Here! http://thirdpartyoffers.juno.com/TGL2141/c?cp=K1NpNNO6vp9ODWDesKlOCgAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAAEUgA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] QSO window Mode BOX
I only work a handful of Modes. When I go to Log a new QSO, All of the modes are listed. Is there a way to just list the 3-4 modes I work? And, the proper box auto-selects? For example, If I hist the "S" key it defaults to SSB, but if I hit the "C" key for CW it goes to Clover or someting? Shouldn't this be linked to your original modes you select in Prefs? Am I missing some selection somewhere? Does my question have merit? Same thing for Bands.If I have selected say, 40 meters, when I Log a QSO after selecting the Mode, if I should hit the 4 it should default to 40M if I haven't selected say 432 or 4cm or whatever in Prefs if the 4 is only connected to the 40 meter band..??? Logical?? Val N4RJ Merry Christmas and happy New Year and Holidays Nutrition Improve your career health. Click now to study nutrition! http://thirdpartyoffers.juno.com/TGL2141/c?cp=mhQ2wbN5WFKn0PdzERX5lwAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAASQwA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Windows 7 and FT-920
Is anyone successfully using this combination? Or FT-920 and Vista? AD1C says Windows/vista and CT10 wont work together. What Contest Programs is anyone using with windows 7? Thanks, Val N4RJ Nutrition Improve your career health. Click now to study nutrition! http://thirdpartyoffers.juno.com/TGL2141/c?cp=f9Mjfz69kDW0sTRwERJ3EgAAJ1DAaECO6VQK8BJZKFQxxfrFAAYAAADNAAASQwA= __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DXBASE Ver 2.0 File Conversion to DX4WIN
Is Anyone able to tell me how to convert the DXBASE Ver 2.0 files Which are .DB files into .ADIF to import into DX4WIN??? If so, please cookbook the HOW as I am short on Computerese... Thanks in advance. Val, N4RJ _ Save on Cell Phones. Click Now! http://thirdpartyoffers.juno.com/TGL2121/fc/Ioyw6i3nRN13YnN6JQh6DOYUZvMwkpyOhApxlUmhiXNxeOpGPOAoyJ/
