Re: [Dx4win] CW INterface
You may want to pick up a MORTTY device! Make a great CW and/or RTTY device! Love mine! Works with most programs Will WC2L On Fri, Jan 3, 2020 at 6:55 PM W9RPM wrote: > Does anyone know of anyone who makes the Serial port CW interface that > will work with DX4WIN. Not able to make it myself. Just want it to plug > into the serial port and Key jack. I tried the USB one on Amazon, but > couldn't get it to work. Operator error I'm sure. Now I cant find where > I put it. > > 73 John W9RPM > > -- > EMAIL: j...@w9rpm.com > WEBPAGE: http://www.w9rpm.com/ > DX CLUB: http://www.tcdxa.org/ > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] K3S setup
OK, I got the CW portion... I had to change the PTT-Key to Off-DTR!! I had the rest.. Took a bit to figure it all out I will ask more about MORTTY.. Will WC2L On Wed, Oct 3, 2018 at 8:34 PM William Liporace wrote: > I could use some help with DX4Win and the K3S. I may have had most things > working, but I have had a few questions... > > Can I use the MORTTY with MMTY, DX4Win and the K3S? Better options? > > how do I want to setup the radio to KEY CW via USA (communications)? > > Any other tips/tricks to setting up the K3S in DX4Win? > > TNX Will WC2L > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] K3S setup
I could use some help with DX4Win and the K3S. I may have had most things working, but I have had a few questions... Can I use the MORTTY with MMTY, DX4Win and the K3S? Better options? how do I want to setup the radio to KEY CW via USA (communications)? Any other tips/tricks to setting up the K3S in DX4Win? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Importing WXJT-X ADI file into DX4WIN V9?
From his email: I got tired of navigating to the WSJT-X directory every time I wanted to import my WSJT-X log into DX4WIN. Fortunately, Windows 10 has a solution. The idea is to create a symbolic link in your SAVE directory that points to the WSJT-X log directory. The full instructions for creating symbolic links are here: https://www.howtogeek.com/howto/16226/complete-guide-to- symbolic-links-symlinks-on-windows-or-linux/ Here's the quick start: 1. Start by opening a Command Prompt in Administrator mode. From the Start menu, find "Windows System" and right-click on "Command Prompt'. Follow the "More" link and then click "Run as Administrator". 2. Determine the location of your WSJT-X log directory. Here is one way: cd %localappdata% C: dir You should see a WSJT-X directory there. The full path should look something like this: C:\Users\jjrei\AppData\Local\WSJT-X 3. Now determine the location of your DX4WIN SAVE directory. Mine is here: E:\dx4w903\save 4. "cd" into your DX4WIN save directory: cd E:\dx4w903\save E: 5. Finally, create the link. Here is the command I used: E:\dx4w903\save> mklink /D WSJT-X C:\Users\jjrei\AppData\Local\WSJT-X (do not type the part *before* the >, only the part beginning with "mklink" That's all there is to it. The next time you want to import using "File | Import", you will see the WSJT-X link in your SAVE directory. Double-click on that link, and you'll find your WSJT-X ADIF file there. This is not limited to WSJT-X, you can create links to anything you want. 73 - Jim AD1C On Wed, Apr 4, 2018 at 6:57 PM, Dennis Petrichwrote: > Hi John, where do I find Jim’s shortcut? I have already looked on the > DX4WIN Support page and found nothing pertaining to this subject. > > Thanks, Dennis > > Sent from Mail for Windows 10 > > From: John, K9EL > Sent: Wednesday, April 4, 2018 5:53 PM > To: Dennis Petrich > Cc: Paul Van Der Eijk; Jim Reisert AD1C; DX4WIN Reflector > Subject: Re: [Dx4win] Importing WXJT-X ADI file into DX4WIN V9? > > Yes, no problem. I import the WSJT-X adi file all the time. I used > AD1C’s file shortcut recommendation to make it easier. A couple clicks and > your QSO’s are in DX4Win. When you import, DX4Win asks you want you want > to do about duplicate QSO’s - don’t import duplicates. Then only the > QSO’s since the last import are actually imported. > > John K9EL > > > On Apr 4, 2018, at 5:45 PM, Dennis Petrich wrote: > > Hello all, > > Is it possible to import ADI files directly from WSJT-X into DX4WIN? The > FT8 log in WSJT-X is suppose to be an .adif file but when I try to import > it into DX4WIN I get an error. I abort at that point not wanting to mess > things us. > > Regards, Dennis, k0eoo > > Sent from Mail for Windows 10 > > From: Paul Van Der Eijk > Sent: Sunday, April 1, 2018 7:04 PM > To: Jim Reisert AD1C > Cc: DX4WIN Reflector > Subject: Re: [Dx4win] Check For Updates Won't Run > > XP users should try the update again ; Scott, KA9FOX, changed the website > such that the files directory no longer requires an https connection. > —Paul, KK4HD > > Sent from my iPhone > > >> On Mar 31, 2018, at 1:16 PM, Jim Reisert AD1C > wrote: > >> > >> On Sat, Mar 31, 2018 at 11:10 AM, David Kozinn K2DBK wrote: > >> > >> The only short-term workaround that I can think of would be to host the > >> actual files on a different website without https and work up a manual > >> process to download and install. (No Jim, I am not suggesting > >> son-of-dxupdate-for-XP-only). > > > > Actually, the country files and award databases are uploaded to my > > website. They would have to be installed manually. > > > > The latest country file is always here: > > > > http://www.country-files.com/dx4win/download9/dx4win9_cty.zip > > > > I have not done anything like this for the custom awards and I've > > blocked the directory listing. > > > > If you use these files you are ON YOUR OWN. I do NOT want to support > > this method of updating DX4WIN 9. I'd rather you upgrade your > > operating system. Seriously. I'm not joking. > > > > -- > > Jim Reisert AD1C, , http://www.ad1c.us > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > Message delivered to pvandere...@gmail.com > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to radiode...@gmail.com > > This list hosted by: http://www.qsl.net > Please help support this email
Re: [Dx4win] Importing WXJT-X ADI file into DX4WIN V9?
File | Import | Select the ADIF you want (C:\Users\(Your user name)\AppData\Local\WSJT-X Then make sure you "Imported QSO is Ignored" Click OK and it should bring in any new Qs. Will WC2L On Wed, Apr 4, 2018 at 6:45 PM, Dennis Petrichwrote: > Hello all, > > Is it possible to import ADI files directly from WSJT-X into DX4WIN? The > FT8 log in WSJT-X is suppose to be an .adif file but when I try to import > it into DX4WIN I get an error. I abort at that point not wanting to mess > things us. > > Regards, Dennis, k0eoo > > Sent from Mail for Windows 10 > > From: Paul Van Der Eijk > Sent: Sunday, April 1, 2018 7:04 PM > To: Jim Reisert AD1C > Cc: DX4WIN Reflector > Subject: Re: [Dx4win] Check For Updates Won't Run > > XP users should try the update again ; Scott, KA9FOX, changed the website > such that the files directory no longer requires an https connection. > —Paul, KK4HD > > Sent from my iPhone > > > On Mar 31, 2018, at 1:16 PM, Jim Reisert AD1C > wrote: > > > >> On Sat, Mar 31, 2018 at 11:10 AM, David Kozinn K2DBK wrote: > >> > >> The only short-term workaround that I can think of would be to host the > >> actual files on a different website without https and work up a manual > >> process to download and install. (No Jim, I am not suggesting > >> son-of-dxupdate-for-XP-only). > > > > Actually, the country files and award databases are uploaded to my > > website. They would have to be installed manually. > > > > The latest country file is always here: > > > >http://www.country-files.com/dx4win/download9/dx4win9_cty.zip > > > > I have not done anything like this for the custom awards and I've > > blocked the directory listing. > > > > If you use these files you are ON YOUR OWN. I do NOT want to support > > this method of updating DX4WIN 9. I'd rather you upgrade your > > operating system. Seriously. I'm not joking. > > > > -- > > Jim Reisert AD1C, , http://www.ad1c.us > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > Message delivered to pvandere...@gmail.com > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to radiode...@gmail.com > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to w...@yccc.org > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Using HF Auto Application with DX4WIN
You can use a serial splitter. It will allow you to use multiple applications from the same com port & radio. Will WC2L On Tue, Mar 27, 2018 at 7:51 PM, W9RPMwrote: > Was hoping I could get it working with DX4WIN using LPB2, but I have not > been able to find that it can broadcast UDP packets in XML Document form > with the TX Frequency in one of the fields. Some one had said it could , > but I can't find how. > > 73 John > > -- > EMAIL: j...@w9rpm.com > WEBPAGE: http://www.w9rpm.com/ > DX CLUB: http://www.tcdxa.org/ > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to w...@yccc.org > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] FIx Mix/Band/Mode etc
I figured that out and working through it.. I am about 80-90% through the process.. I was hoping that DX4Win would the read fields in the download and fix things... No such luck!! Will WC2L On Tue, Feb 6, 2018 at 7:20 PM, Mike Cizek W0VTT <mgci...@gmail.com> wrote: > Hello Will, > > What do you mean by "fix" them? Those fields populate when you make a DXCC > (or other award) submission through DX4WIN. If you already have several > (or > several hundred) DXCC credits with the League but have not yet entered this > information into DX4WIN, you can use AD1C's utility program to help: > http://dx4win.ad1c.us/lotw/index.html > This will not be a trivial process, but by following Jim's instructions, > you > can match your credits with the League to your dx4win records. > > -- > 73, > Mike Cizek WØVTT > > -Original Message- > From: dx4win-boun...@mailman.qth.net [mailto:dx4win-bounces@ > mailman.qth.net] > On Behalf Of William Liporace > Sent: Wednesday, January 31, 2018 20:16 > To: Dx4win@Mailman. Qth. Net > Subject: [Dx4win] FIx Mix/Band/Mode etc > > Is there a way to fix the Mixed, band, mode, and etc at the bottom of the > log?? Or do you have to go and edit it all the way through?? > > I want to reconcile it.. I notice it is all blank. > > TNX Will WC2L > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to mgci...@gmail.com > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] FIx Mix/Band/Mode etc
Is there a way to fix the Mixed, band, mode, and etc at the bottom of the log?? Or do you have to go and edit it all the way through?? I want to reconcile it.. I notice it is all blank. TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Navigator , RTTY & DX4Win
Any users using the Navigator? I have MMTTY working if I just go to the stand alone directory. It is not working with in DX4Win. I know it is more than likely some thing simple, but it is eluding me. TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Navigator , RTTY & DX4Win
OK, a bit of struggling and I got it working... Will WC2L On Tue, Jan 30, 2018 at 7:38 PM, William Liporace <w...@yccc.org> wrote: > Any users using the Navigator? I have MMTTY working if I just go to the > stand alone directory. It is not working with in DX4Win. I know it is more > than likely some thing simple, but it is eluding me. > > TNX Will WC2L > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Ctrl-L Listen holding the bandmap
When you do a Ctrl-L on a packet spot it moves the radio to that Band/Mode/Frequency, but it seems to Toggle the spot window in a hold. Is there a way stop it from holding the bandmap?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Manuals - etc
The user guide is from v 7.01 September 2008! Is there a user guide? Help file looks more recent, I have not gone through it completely. This this the "manual" from now on? OK, I went to help & contents to read the portion that I wanted. I get the QSOs not in log, but the view I had more then the four in the display! Do I have to go through all of it to find them? It would be nice to have the ability to sort or filter. One of the issues is to see the conflicts. I was told there was over 100 how do you resolve them?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Multiple Calls - LOTW - QSLing
OK, I guess I am missing something and have tried following the info here: http://dx4win.ad1c.us/appnotes/nr7.html It appears that two of my group filters may work, but one does not. I want to be able to filter my log so I can sign and upload the correct info. So I have created three Groups - One for each call 000 - WC2L 001 - NA2NA 002 - KB2HUN Under Selection Editor I created three Selections 000 - WC2L-QSL 001 - NA2NA-QSL 002 - KB2HUN-QSL They are all Group/Date filters The WC2L & KB2HUN appear to work, The NA2NA does not. They are all configured what I think is right. I have not tested any of them. Ideas and Suggestions?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Ctrl-L Holding Packet
I am more than likely wrong, but when you use the Ctrl-L to listen on a spot, it holds packet from scrolling. I want the system to keep scrolling and keep seeing more incoming spots. When you listen, the cluster will stay holding till you hit the Insert key. Can we get a check box for changing this behavior?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] RTTY/MMTTY
OK, I click on one of the macros and got Paul as my name. Paul's QTH. Where is everything setup. I see the macro keys.. some help?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] LOTW - DXCC QSL Download
I'm a bit perplexed... >From the not found in log: X WL7E 13-Feb-2015 00:00 12mSSB 0 >From my Log and LOTW (as expected) WL7E 13-Feb-2015 00:59 12m SSB (no idea on why). Only option is to reach out all of the Qs that are mismatched to see what I have wrong! Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] LOTW - DXCC QSL Download
No, time in the download is 00:00 On Tue, Nov 28, 2017 at 7:44 AM Rick Murphy <k1mu.nos...@gmail.com> wrote: > Find that call in the ADIF file you downloaded from LoTW. > What is the time in that entry? Does the time match what you have in > DX4WIN for that QSO? > 73, > -Rick > > On Tue, Nov 28, 2017 at 7:33 AM, William Liporace <w...@yccc.org> wrote: > >> I did a LOTW DXCC QSL Download. I ended up with a whole bunch of not found >> in log. I picked one of the rarer calls and did a search in my log. Not >> sure why it was mark not in log. I did notice that the not found log >> didn't >> have any times. Call, date, band and mode were all correct. >> >> Is there an easy fix? >> How do I resolve all of the errors? >> >> TNX Will WC2L >> > __ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:DX4WIN@mailman.qth.net >> Message delivered to k1mu.nos...@gmail.com >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > > -- > Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] LOTW - DXCC QSL Download
I did a LOTW DXCC QSL Download. I ended up with a whole bunch of not found in log. I picked one of the rarer calls and did a search in my log. Not sure why it was mark not in log. I did notice that the not found log didn't have any times. Call, date, band and mode were all correct. Is there an easy fix? How do I resolve all of the errors? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] AA7AA (Tucson) DX Cluster Causes Program to Crash
You can connect to my node, dxc.wc2l.com An AR-Cluster node. Will WC2L On Wed, Nov 15, 2017 at 10:51 AM, Mike Cizek W0VTTwrote: > Hello Darrell, > > I presume you mean AB7AA? It causes my program to crash, too. Trying to > connect directly doesn't work, either, so there must be something wrong > with > his telnet site. > > -- > 73, > Mike Cizek WØVTT > > -Original Message- > From: dx4win-boun...@mailman.qth.net [mailto:dx4win-bounces@ > mailman.qth.net] > On Behalf Of Darrell Earnshaw > Sent: Wednesday, November 15, 2017 09:22 > To: Dx4win@Mailman. Qth. Net > Subject: [Dx4win] AA7AA (Tucson) DX Cluster Causes Program to Crash > > Every time I try to connect to the AA7AA (Tucson) cluster, the program > crashes and generates a bug report. (Sadly, I’m running DX4WIN in a VM on > my > Mac, and the VM isn’t configured to send outgoing mail.) Originally, I > thought it may be skin-related, as I had just switched to both ‘macOS’ and > ‘iTunes’ skins, but it seems to be skin independent. > > So far, it only seems to be this particular cluster, as other cluster > connections work fine. > > Just FYI. > > Darrell > > NR3Y > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to mgci...@gmail.com > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to w...@yccc.org > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] PSK Bug??
It does, but then there is nothing in the windows that I see... I will look more tonight if I get a chance. Will WC2L On 11/3/2017 7:04 AM, PY2YP wrote: Same thing happens here. To the screen back I click on the bottom bar and drag it up. After that it will remain OK until I resize. 73 DX de PY2YP - Cesar On 03/11/2017 08:24, William Liporace wrote: When I tried to resize the psk window everything has disappeared! So it seems there is a bug here. If you go close to bottom you will be able to resize it but I was not able to restore the buttons. But the rest of PSK window is blank... Kostas SV1DPI also confirmed this issue. Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to py...@py2yp.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to w...@wc2l.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK Bug??
When I tried to resize the psk window everything has disappeared! So it seems there is a bug here. If you go close to bottom you will be able to resize it but I was not able to restore the buttons. But the rest of PSK window is blank... Kostas SV1DPI also confirmed this issue. Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Digital Mode Configuration Help Needed
I thought it was my Navigator that was having issues.. It is more than likely a configuration issues. I have installed the 9.02 version already tonight... So I am using the US/Timewave Navigator (same device). Com 4 - CAT control Com 5 - PTT Com 6 - WinKey Com 7 - PSK Com 8 - RS-232 comport on the Navigator In DX4Win Radio tab Only one radio - FTdx5000 - no issues Control tab Rotor - Green Heron - Com 3 PSK Sound Card Input/output - Navigator RX/TX CW Tab Device - Winkey External Keyer - Com 6 Cw/PTT - none RTTY tab Type - none MMTTY - Path set to C:\Ham\MMTTY\MMTTY.EXE It appears that I can't ge-+t PSK to work. There is NO function keys. RTTY works via MMTTY CW is working For PSK and the FTdx5000, the radio needs to be in Packet Mode. I can hear the tones from monitor, but I don't see any RF going out. Any ideas or suggestions?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DXLAB Import
Hi Folks, I got away from DX4Win. Some of it was inactivity, some of it was lack of support. Aso soon as I saw Paul's posting, I signed right up!! So the big thing is all of the errors on the import: 75 Simple Errors 123 Zone Exceptions 20 Country Exceptions 4264 errors were found (one that bothers me the most). Any ideas?? Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN Secure Order
Must be, of course my guess is that he is sending out a lot!! Will WC2L On 10/19/2017 7:00 PM, n...@vci.net wrote: Is there a long queue for license keys? Dave, N4QS -Original Message- From: sa...@dx4win.com [mailto:sa...@dx4win.com] Sent: Thursday, October 19, 2017 2:42 PM To: David R. Perry <n...@vci.net> Subject: DX4WIN Secure Order Thank you for your recent order via the DX4WIN web site. The DX4WIN license keys are manually generated and as soon as yours has been generated, it will be sent to you as quickly as possible. Your business is appreciated. If you have any questions about your order, please let us know. Regards, BrookHill Data Systems LLC sa...@dx4win.com http://www.dx4win.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Print QSL Cards
I was hoping to print directly on the back of my pre printed QSL cards... This is my third call. I have three different cards (and styles). I can do labels for the other other two. My current printer is a Brother HL-5250. I also have a HP OfficeJet Pro 8610, but that has not as easy to setup (as I can tell). TNX Will WC2L On 3/20/2016 8:46 PM, Dan Violette wrote: Will, Is this preprinted cards and you want to go in a blank spot instead of sticking on a label (that is what I do)? What printer do you expect to use? This will all help for replies since everyone is in a different situation and lots of customizing needed. Dan KI6X -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William Liporace Sent: Sunday, March 20, 2016 5:07 PM To: DX4WIN POSTINGS Subject: [Dx4win] Print QSL Cards I was looking at testing printing directly to QSL cards. I am using typical QSL card stock that is 3.5x5.5. Can someone tell me how to get DX4WIN to print directly on the cards?? TNX Will -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Print QSL Cards
I was looking at testing printing directly to QSL cards. I am using typical QSL card stock that is 3.5x5.5. Can someone tell me how to get DX4WIN to print directly on the cards?? TNX Will -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] LOTW - DXCC Mismatches
No issue here. It was run on Win10. I can more than likely test on Win7. Will WC2L On 3/12/2016 10:47 AM, Roger D Johnson wrote: I tried K8UTs LoTWtoDX4Win V098 program and got a "not a valid Win32 program" error. Has anyone else had a problem? 73, Roger On 3/10/2016 8:49 PM, William Liporace wrote: Good Evenings, I have recently reloaded DX4WIN. I exported from the other logging software and imported into DX4WIN (export/import ADIF). When I ran the compare utility, I got over 1600 mismatches. Is there an easy way to update/fix this?? TNX Will WC2L __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telent dxc.wc22l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] LOTW - DXCC Mismatches
Good Evenings, I have recently reloaded DX4WIN. I exported from the other logging software and imported into DX4WIN (export/import ADIF). When I ran the compare utility, I got over 1600 mismatches. Is there an easy way to update/fix this?? TNX Will WC2L -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telent dxc.wc22l.com or 144.93 MHz w...@wc2l.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] conect cluster
You don't mention what nodes you are having an issue with. K1TTT changed to port 23. My node has been very active dxc.wc2l.com Will WC2L On 10/6/2015 2:39 AM, Antonin Hamouz wrote: Everything is already a favorite ok.My 3 clusters were not working. Exact Match coincidences. Tnx Tony OK1DTC. __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] where
I am sorry, they call this paid support? Yes, I have always supported the software... Wish I was a programmer Will You have to go to the European distributor's website. Has not been put on the DX4WIN site yet: http://www.on4aoi.be/ Pick DX4WIN (left side and very slow website from here) ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] where
I do want to add one other comment IT IS GREAT to see ALL of the support that we give each other!! It is a lot of fun... as I am always reminding others or being reminded it is a hobby!! Will WC2L ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] 9M6
OK, I just worked 9M6/N1UR DX4Win shows East Malaysia (9m5), I know he is on Spratly Island (1S). I am guessing there will be an add on for the next country file or did I miss one? Will WC2L From [EMAIL PROTECTED] Sun Mar 23 09:23:35 2008 From: [EMAIL PROTECTED] (Howard Dickson) Date: Sun Mar 23 09:29:57 2008 Subject: [Dx4win] Network Version of DX4Win Message-ID: [EMAIL PROTECTED] Our Club has just moved into new facilities and we have established three operating positions with computers at each position and they are all networked to a central server. We want to used DX4Win but but the programme does not seem to want to work from a central server. Is there a server-friendly version of DX4Win, or is there some trick required to get the program to operate in this way. Any help would be appreciated. Howard - VE1DHD Halifax Amateur Radio Club From [EMAIL PROTECTED] Sun Mar 23 10:07:30 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Mar 23 10:14:03 2008 Subject: [Dx4win] 9M6 In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] On 3/23/2008 8:11 AM, William Liporace - WC2L wrote: OK, I just worked 9M6/N1UR DX4Win shows East Malaysia (9m5), I know he is on Spratly Island (1S). I am guessing there will be an add on for the next country file or did I miss one? Already released: http://www.country-files.com/dx4win/history.htm#47 -- Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Sun Mar 23 10:15:11 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Mar 23 10:21:51 2008 Subject: [Dx4win] Set up QRP log In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Hi Dave, Don't assign a group number to QRP QSOs. Just check the QRP box. I think it automatically becomes group number 254 or 255. F8 filters do not affect DXCC status. You must create a Group Filter (See Filter - Selection), name it QRP (or something else), check the QRP box at the bottom, then update and save. DX4WIN clears ALL filters when you re-open the log. All you need to do then is Filter - Selection, pick your QRP filter name from the drop-down box at the top, then OK. 73 - Jim AD1C On 3/23/2008 8:10 AM, David M. Monfried wrote: Going slightly nuts here trying to set up a separate log just for QRP. I have 431 QRP Q's, a small subset of the entire log. All QRP log entries are marked with both the QRP box set to Y and with Group showing the number 1. The objective is to track my DXCC and band/mode/country status just for DXCC. When I select Filter (F8) and sort by either QRP or Group 1, up pops the correct info (although the band/mode/country status in the Country window shows status for the entire log, not just the QRP subset). The problem is can save the log (via File/Save As/W2PK QRP.dxl), but when I open that newly-saved file, I get the entire log, not just the QRP subset. I'm certain that I'm overlooking something very basic and simple...but cannot figure out what it might be. Any help would be appreciated. Tnx. 73, Dave, W2PK -- Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Sun Mar 23 10:25:46 2008 From: [EMAIL PROTECTED] (David M. Monfried) Date: Sun Mar 23 10:32:09 2008 Subject: [Dx4win] Set up QRP log In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Perfect, Jim. Thanks very much. Dave, W2PK -Original Message- From: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Sent: Sunday, March 23, 2008 8:15 AM To: David M. Monfried Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Set up QRP log Hi Dave, Don't assign a group number to QRP QSOs. Just check the QRP box. I think it automatically becomes group number 254 or 255. F8 filters do not affect DXCC status. You must create a Group Filter (See Filter - Selection), name it QRP (or something else), check the QRP box at the bottom, then update and save. DX4WIN clears ALL filters when you re-open the log. All you need to do then is Filter - Selection, pick your QRP filter name from the drop-down box at the top, then OK. 73 - Jim AD1C On 3/23/2008 8:10 AM, David M. Monfried wrote: Going slightly nuts here trying to set up a separate log just for QRP. I have 431 QRP Q's, a small subset of the entire log. All QRP log entries are marked with both the QRP box set to Y and with Group showing the number 1. The objective is to track my DXCC and band/mode/country status just for DXCC. When I select Filter (F8) and sort by either QRP or Group 1, up pops the correct info (although the band/mode/country status in the Country window shows status for the entire log, not just the QRP subset). The problem is can save the log (via File/Save As/W2PK QRP.dxl), but when I open that newly-saved file, I get the entire log, not just the QRP subset. I'm certain that I'm
[Dx4win] Talk messages and announcements
I do not see where you get the Talk messages and announcements window. what am I missing. OK, I have ot kept up with this in a while!! Will WC2L - Original Message - From: ON4VDV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, March 03, 2008 1:31 PM Subject: [Dx4win] Talk messages and announcements Hello all , I've got a problem with the window talk messages and announcements . I can see the messages to me , to all , etc on the Packet window but not on the Talk messages and announcements window . I need to close this window and when i restart this window by pressing the view announcements button on the DX spot window the messages will be on . Anyone know what could be wrong on my settings ? Many thanks , Tom - ON4VDV ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] dxc.wc2l.com replaces na2na.net
Good Afternoon, Sorry to take up the bandwidth. I have received multiple email messages this week despite the notifications and email messages sent out. Please be aware of the following: New node callsign WC2L and address is: dxc.wc2l.com Old node callsign NA2NA and address was: na2na.net Please remember that there is a great web site with the latest list and addresses at http://www.dxcluster.info that is kept up by AD1C. TNX es 73 Will WC2L http://www.wc2l.com telnet://dxc.wc2l.com
[Dx4win] Logbook Frustration!
I have recently done a LOTW a card submission to the league. I got my original DXCC in sync with DX4Win. I did a LOTW submission and again made sure that the LOTW and DX4WIN matched. FYI, much of this was with great help from AD1C and his checking utility! I then did a card submission to the league in person. It was only 85 cards. I now took the paper print out from the league and the listing from the DX4WIN and was trying to make sure that every thing was OK. Here is what I am seeing as a reference: DXCC Report: 3B9 Mixed, Phone, CW, 40, 30, 20 DX4Win: Mixed, CW, 20 I looked at my QSOs for 3B9 and I see that the QSOs for Phone, 40 30 were marked as Checked. I am finding this VERY frustrating. I did do the card submission and got a few duplicate replies from the league. I am guessing this is for a few reasons... Before I go totally ballistic, How do I fix the problem?? Will WC2L From [EMAIL PROTECTED] Sun Feb 10 10:14:38 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Feb 10 10:19:01 2008 Subject: [Dx4win] Logbook Frustration! In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Will, there are three separate award flags per QSO - one each for DXCC Mixed, Band and Mode. Are the DXCC Band flags set to Checked for your 30 and 40 meter QSOs, or are the wrong flags (mixed and/or mode) checked instead? 73 - Jim AD1C On 2/10/2008 8:04 AM, William Liporace - WC2L wrote: I have recently done a LOTW a card submission to the league. I got my original DXCC in sync with DX4Win. I did a LOTW submission and again made sure that the LOTW and DX4WIN matched. FYI, much of this was with great help from AD1C and his checking utility! I then did a card submission to the league in person. It was only 85 cards. I now took the paper print out from the league and the listing from the DX4WIN and was trying to make sure that every thing was OK. Here is what I am seeing as a reference: DXCC Report: 3B9 Mixed, Phone, CW, 40, 30, 20 DX4Win: Mixed, CW, 20 I looked at my QSOs for 3B9 and I see that the QSOs for Phone, 40 30 were marked as Checked. I am finding this VERY frustrating. I did do the card submission and got a few duplicate replies from the league. I am guessing this is for a few reasons... Before I go totally ballistic, How do I fix the problem?? -- Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Sun Feb 10 10:20:36 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Feb 10 10:24:59 2008 Subject: [Dx4win] Import LogEQF? In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Tom N3EQF helped me. These files are from the DOS version, and can be imported into Win-EQF with relatively little difficulty. From there, Win-EQF can output ADIF format. 73 - Jim AD1C On 1/28/2008 10:55 AM, Jim Reisert AD1C wrote: Someone sent me some files from LogEQF but I don't know how to import them into DX4WIN: call.T_K call.L_G (this is the largest file) call.N_T I looked at the DX4WIN import filters, and LogEQF says something about dBase conversion. How can I help this person import his files into DX4WIN? -- Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Sun Feb 10 11:41:53 2008 From: [EMAIL PROTECTED] (Roger Wise) Date: Sun Feb 10 11:47:32 2008 Subject: [Dx4win] Lost help contents Message-ID: [EMAIL PROTECTED] I lost the help contents in V703.16. Error message says cannot get help contents. I am using vista OS. I lost my help and need your help please. Rog KI0F Thanks to all in advance. From [EMAIL PROTECTED] Sun Feb 10 12:03:15 2008 From: [EMAIL PROTECTED] (Roger Wise) Date: Sun Feb 10 12:08:40 2008 Subject: [Dx4win] Help files Message-ID: [EMAIL PROTECTED] I found the problem. Went to compatibility and changed it from windows xp service pack 2 back to VISTA. Works now. I had the start window ok, but problem was xp compatibility. Rog KI0F From [EMAIL PROTECTED] Sun Feb 10 17:51:47 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Feb 10 17:56:14 2008 Subject: [Dx4win] Lost help contents In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] On 2/10/2008 9:41 AM, Roger Wise wrote: I lost the help contents in V703.16. Error message says cannot get help contents. I am using vista OS. I lost my help and need your help please. Rog KI0F See top of this web page: http://dx4win.ad1c.us/ -- Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Sun Feb 10 21:11:24 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Feb 10 21:15:59 2008 Subject: [Dx4win] DX4WIN.TCP updated 11 February 2008 Message-ID: [EMAIL PROTECTED] DX4WIN.TCP is the list of Telnet DX Cluster nodes. If you don't use the latest file, you may find that some nodes are unreachable. I updated DX4WIN.TCP on 11 February 2008. The latest
[Dx4win] Listing/Summary/LOTW Mismatch
Yes there is the utility. The issue is the Listing and the Summary for DX4WIN do NOT match! - Original Message - From: Kostas SV1DPI [EMAIL PROTECTED] To: REFLECTOR dx4win dx4win@mailman.qth.net Sent: Sunday, February 03, 2008 11:12 PM Subject: Re: [Dx4win] Listing/Summary/LOTW Mismatch I don't know what happened but do you know that there is a utility to compare lotw and dx4win stats? see for this here http://www.ad1c.us/dx4win/dx4wlotw.htm Kostas sv1dpi - Original Message - From: William Liporace - WC2L [EMAIL PROTECTED] To: DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Monday, February 04, 2008 3:15 AM Subject: [Dx4win] Listing/Summary/LOTW Mismatch Good Evening, I have been going nuts! After being inactive for a couple of years, I have decided to get up to date and get my logs and LOTW in sync. I had cleared all of the flags, got DX4WIN to match LOTW, saved the log. I happen to work a station. I went to check my logs after uploading them to LOTW and discovered that the Listing/Summary/LOTW are out of sync. I am short one band country, CW, and 10 meter QSO (same Q). I have counted the CW and countries listed in DX4WIN. They are correct in the list, but wrong in the summary. I can not seem to figure out how/why they are out of sync. I left the logs for a couple of days after a family emergency and came back to them tonight. I have spent a few hours combing over them. I had printed the html LOTW listing and the DX4WIN listings. Too bad DX4WIN does not do it like the league!! Any ways: Why do they get out of sync? How do you get them all sync'd up? After I get them in sync, when is the best time to buy LOTW QSOs? I want to get all I can via LOTW then do another submission via paper. I am guessing I will go through a lot of band/mode/country credits 73 Will WC2L ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Listing/Summary/LOTW Mismatch
It looks like it is only the summary on the league WEB site that is off. I have combed through it QSO by QSO and it is perfect. Now for the hard part... What is the best way to buy the LOTW credits and get them applied to the DX4WIN. I have my log uploaded. I have purchase plenty of credits. I want to do LOTW first, then a paper submision after TNX 73 Will WC2L
[Dx4win] Listing/Summary/LOTW Mismatch
Good Evening, I have been going nuts! After being inactive for a couple of years, I have decided to get up to date and get my logs and LOTW in sync. I had cleared all of the flags, got DX4WIN to match LOTW, saved the log. I happen to work a station. I went to check my logs after uploading them to LOTW and discovered that the Listing/Summary/LOTW are out of sync. I am short one band country, CW, and 10 meter QSO (same Q). I have counted the CW and countries listed in DX4WIN. They are correct in the list, but wrong in the summary. I can not seem to figure out how/why they are out of sync. I left the logs for a couple of days after a family emergency and came back to them tonight. I have spent a few hours combing over them. I had printed the html LOTW listing and the DX4WIN listings. Too bad DX4WIN does not do it like the league!! Any ways: Why do they get out of sync? How do you get them all sync'd up? After I get them in sync, when is the best time to buy LOTW QSOs? I want to get all I can via LOTW then do another submission via paper. I am guessing I will go through a lot of band/mode/country credits 73 Will WC2L From [EMAIL PROTECTED] Sun Feb 3 21:16:35 2008 From: [EMAIL PROTECTED] (Bob Carter) Date: Sun Feb 3 21:20:16 2008 Subject: [Dx4win] problem opening dx4win Message-ID: [EMAIL PROTECTED] Thanks to Kostas and Shirley for your information concerning my problem. Sure enough the new cty file I downloaded got corrupted. Installed the old one and worked OK. Downloaded the new again and installed. Everthing now OK. Thanks again and 73, B. Carter K5EYT From [EMAIL PROTECTED] Sun Feb 3 21:33:15 2008 From: [EMAIL PROTECTED] (Andy Hewitt) Date: Sun Feb 3 21:36:57 2008 Subject: [Dx4win] IC706mk11G Message-ID: [EMAIL PROTECTED] Hi all, Can any one help with setting up an IC706mkIIG to talk to DX4Win? It used to work FB but suffered damage from a nearby electrical discharge. It was returned to ICOM for repair and is working OK but I cannot get it to work with DX4Win. I am using the same set-up as before witha MicroHam USB interface. The discharge blew up the processor which was changed so all the settings reverted to factory defaults. I have been going through them all on the menus and getting them back to what I want but cannot get the rig/PC to talk. When I try to start radio I get a message saying ie_open - device already open as if another program is using the port. I have tried changing the port although this is theway things were set up previously. Any help would be appreciated 73 Andy G3SVD ( currently XE1/G3SVD) From [EMAIL PROTECTED] Sun Feb 3 23:12:19 2008 From: [EMAIL PROTECTED] (Kostas SV1DPI) Date: Sun Feb 3 23:16:18 2008 Subject: [Dx4win] Listing/Summary/LOTW Mismatch References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] I don't know what happened but do you know that there is a utility to compare lotw and dx4win stats? see for this here http://www.ad1c.us/dx4win/dx4wlotw.htm Kostas sv1dpi - Original Message - From: William Liporace - WC2L [EMAIL PROTECTED] To: DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Monday, February 04, 2008 3:15 AM Subject: [Dx4win] Listing/Summary/LOTW Mismatch Good Evening, I have been going nuts! After being inactive for a couple of years, I have decided to get up to date and get my logs and LOTW in sync. I had cleared all of the flags, got DX4WIN to match LOTW, saved the log. I happen to work a station. I went to check my logs after uploading them to LOTW and discovered that the Listing/Summary/LOTW are out of sync. I am short one band country, CW, and 10 meter QSO (same Q). I have counted the CW and countries listed in DX4WIN. They are correct in the list, but wrong in the summary. I can not seem to figure out how/why they are out of sync. I left the logs for a couple of days after a family emergency and came back to them tonight. I have spent a few hours combing over them. I had printed the html LOTW listing and the DX4WIN listings. Too bad DX4WIN does not do it like the league!! Any ways: Why do they get out of sync? How do you get them all sync'd up? After I get them in sync, when is the best time to buy LOTW QSOs? I want to get all I can via LOTW then do another submission via paper. I am guessing I will go through a lot of band/mode/country credits 73 Will WC2L ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Problems printing labels/QSL Cards
Maybe, but mine is not working!! - Original Message - From: Kostas sv1dpi [EMAIL PROTECTED] To: REFLECTOR dx4win dx4win@mailman.qth.net Sent: Tuesday, May 15, 2007 12:10 AM Subject: Re: [Dx4win] Problems printing labels/QSL Cards You have a Custom paper. Under paersize you wrote the word CUSTOM.Choose another paper; what your labels are. I have custom selected because i print direct in my cards. When you write custom, you will have a new window. You can write the custom paper's dimensions there. Finally... I get the same message but i type ok and going. The printing is ok, as expected. kostas sv1dpi - Original Message - From: William Liporace - WC2L [EMAIL PROTECTED] To: DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Tuesday, May 15, 2007 4:56 AM Subject: [Dx4win] Problems printing labels/QSL Cards Good Evening, I am currently running DX4WIN 7.03.16 on XP SP2 with all of the patches. I have a Brother HL-1440 laser printer. I also have a HP Deskjet 940C configured. I have the same issue with both printers... When I go to the label editor and select preview, I get the following error: Warning: Not able to set custom Paper Size The only option that I have is OK I know that I used to have this working on XP and and the same printer... Any ideas? TNX Will WC2L telnet://dxc.wc2l.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] How to upgrade to 7.03
http://dx4win.ad1c.us/ - Original Message - From: ea5yj [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, May 08, 2007 9:40 AM Subject: [Dx4win] How to upgrade to 7.03 Hello everybody: Does anybody if there is any link to know how to upgrade to new Dx4win version 7.03 from older versions ? -- Alfred (pk232 at gmail.com) ea5yj ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Call sign node change
Good Evening, I have finally upgraded, got a new vanity call. The new call is WC2L (old call NA2NA) The packet cluster node is now dxc.wc2l.com (na2na.net still works). the nodes that meed/have a connection, please update your info. For VE7CC, DX4WIN, WRITELOG etc, please update your info. As an FYI, DXCluster.info has been notified. From [EMAIL PROTECTED] Wed Apr 18 21:36:39 2007 From: [EMAIL PROTECTED] (William Liporace - NA2NA) Date: Fri Apr 20 11:52:10 2007 Subject: [Dx4win] Node Call change update Message-ID: [EMAIL PROTECTED] Good Evening, I have upgrade my license (finally) and changed my call. Please update your connections to me. New Callsign: WC2LOld Callsign: NA2NA New Telnet address: dxc.wcl.com Old Telnet address: na2na.net (still works) The RF node ONLY uses the new call WC2L If any one needs help or has questions. please notify me TNX Will WC2L From [EMAIL PROTECTED] Fri Apr 20 21:24:15 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Fri Apr 20 21:29:43 2007 Subject: [Dx4win] DX4WIN.TCP updated 21 April 2007 Message-ID: [EMAIL PROTECTED] You can download the latest DX4WIN.TCP file (list of DX cluster nodes reachable via Telnet) from: http://dx4win.ad1c.us/cluster.htm The release notes are as follows: Added AI4OF-1 Added I8NHJ-6 Added IK0XWV-6 Added IK6XMI Removed IK7MCJ-6 Added IQ4AX Added IT9BLB-6 Added IW9FDD-6 Added JI2ZMJ Removed K4SAC-1 Added RA3AWW Removed RN6BN-1 Added SM0RUX-6 Removed SR9DDF-12 Added WB0YRQ-7 Changed NA2NA to WC2L Nodes are removed if I am told they are no longer active, or they have not been reachable recently. When a node comes back to life, it will appear in the list again. This prevents people from trying to connect to non-working nodes. If there are any nodes that you use that are NOT in the file, please let me know. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] USB Radio control?
Good Evening, I was looking at USB to TTL communications cable. I know they also have USB to Serial devices. Has any one tried to setup the radio for USB? Can it be setup for USB? I know there are no choices or USB in the preferences. TNX Will NA2NA telnet://na2na.net From [EMAIL PROTECTED] Thu Aug 24 21:07:59 2006 From: [EMAIL PROTECTED] (George) Date: Thu Aug 24 21:22:04 2006 Subject: [Dx4win] DX4WIN_Rotor-EZ Message-ID: [EMAIL PROTECTED] Anyone know what I should put in the hand shake box under the control of the preferences in DX4WIN??? So far I can't make DX4WIN turn my rotor. Thanks. George From [EMAIL PROTECTED] Thu Aug 24 21:08:04 2006 From: [EMAIL PROTECTED] (Robert Naumann) Date: Thu Aug 24 21:22:07 2006 Subject: [Dx4win] USB Radio control? In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Bill, Typically, when you use a USB to serial interface, the software sets up a virtual com port. You then set your software to use that virtual port - not USB. 73, Bob W5OV -Original Message- From: William Liporace - NA2NA [mailto:[EMAIL PROTECTED] Sent: Thursday, August 24, 2006 7:52 PM To: DX4WIN POSTINGS Subject: [Dx4win] USB Radio control? Good Evening, I was looking at USB to TTL communications cable. I know they also have USB to Serial devices. Has any one tried to setup the radio for USB? Can it be setup for USB? I know there are no choices or USB in the preferences. TNX Will NA2NA telnet://na2na.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Sorting Logbook
I am now running 6.04 and did some work on my log. I am seeing the sort by date to messed up. I modified some QSOs (changed the date by one day). Now the log shows some QSOs not in the right date order. Why is that?? TNX Will From [EMAIL PROTECTED] Mon Jan 24 06:12:27 2005 From: [EMAIL PROTECTED] (Larry Gauthier (K8UT)) Date: Mon Jan 24 06:19:00 2005 Subject: [Dx4win] Entering 10-10 numbers in v6.04 References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Pete, There is still a spot for 10x numbers, but the location changed several years ago. It's now near the bottom of the QSO window in the Custom Award field. If you can't see the Custom Award field, press the F5 key repeatedly while in the QSO screen -- each successive keypress will expand the screen. To enter a TenTen (the name of the award in the drop-down menu) number, the QSO Band field must be set for 10 meters (or 28 MHz). -larry K8UT 10x #2582 - Original Message - From: [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, January 23, 2005 7:40 PM Subject: [Dx4win] Re: Dx4win I have a question... I went from version 3.04 to version 6 There used to be a place in version 3.04 on the mail screen to enter 10-10 numbers, but I dont see it on the main screen anymore. Was it removed from the program? If so why? 73 de Pete KC4WWU ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Duplicate QSOs in Log
Is there a way to clear duplicate QSO? I thought I imported a log twice, but It does not appear to be the same log twice, just QSOs. Can I clear them? How, any easy way?? TNX Will From [EMAIL PROTECTED] Sun Jan 9 18:14:52 2005 From: [EMAIL PROTECTED] (F6EXV) Date: Sun Jan 9 18:18:44 2005 Subject: [Dx4win] Installing on portable computer Message-ID: [EMAIL PROTECTED] Hello all, I am about to go on expedition, and would like to use DX4Win on a portable computer that a friend lets me use on that occasion. I installed DX4Win, and even as a demo, the program will not start, with an error message saying : Port driver not found. The computer has Windows Millenium. Any hint, and way to correct that ? Thanks and 73 Paul F6EXV
[Dx4win] Port Driver Not Found ?
I believe it is looking for the LPT driver for CW keying... There is a couple of choices Will NA2NA - Original Message - From: Mike Rhodes [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Monday, December 20, 2004 8:23 PM Subject: [Dx4win] Port Driver Not Found ? I just reformatted my hd and loaded XP Home w/SP2. Tried both loading from scratch and copying the complete DX4Win folder but still get the message: Port Driver Not Found Check Appendix: Files for the correct driver This sure sounds familiar but I have not been able to find the answer. Any help or directions to the info will be appreciated. Tnx 73 de Mike / W8DN ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win From [EMAIL PROTECTED] Mon Dec 20 21:09:38 2004 From: [EMAIL PROTECTED] (Larry Gauthier (K8UT)) Date: Mon Dec 20 21:20:46 2004 Subject: [Dx4win] The solution for several working LPT ports References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Guy, I am sorry, but I must disagree with your suggestion that the solution to the parallel port driver problem is that new computer owners must dismantle their Dells and Gateways and Compaqs, replacing their new motherboards and USB ports with 10 year old ISA technology and hard-coded LPT ports. Do not try and disguise this software problem with a cheap hardware fix' - that is just asking for trouble. You're swimming upstream against the strategic product directions of Intel, Microsoft, and the BIOS vendors. The correct solution to the parallel port problem is that software developers (we're talking about DX4WIN, ARSWin, TopTen Devices, WaveNode technologies here...) must revamp their programs to become compliant with the new hardware and operating system architectures. This means that they must use new compilers, new I/O utilities, and deliver new releases of their programs. Unless/until that happens, the customers of these vendors are the ones who will suffer, because they are purchasing products that cannot possibly work on the latest hardware and software platforms. Unless, of course, you intend to make the ridiculous suggestion that hams should purchase the latest and greatest ham radio technology with the understanding that it will only work properly on 10-year-old hardware and 5-year-old operating systems. ;-) ... I didn't think so! [DISCLAIMER - keep in mind that I am talking specifically about those characteristics of DX4WIN, and other programs, that would require multiple parallel ports to control things like CW keying, antenna rotors, band decoders, remote antenna switches, remote sensors and wattmeters, etc. If you don't have those requirements, these issues do not apply] -larry K8UT - Original Message - From: ON4AOI [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, December 20, 2004 2:11 PM Subject: [Dx4win] The solution for several working LPT ports Hi All, for those who are still looking for several working LPT's the solution is here Probably there are lot of people complaining about the missing ISA slots on the latest motherboards. SOLTEK motherboards has the solution TYPE = SL-XP865G-3IG Chipset Intel 865G + ICH5 Processor CPU Socket 478B on board. Front Side Bus 800/533/400MHz Front Side Bus. Memory 2 x 184-pin DDR DIMM Sockets. Supporting unregistered non-ECC DDR 400/333/266 DRAM up to 2GB. Supporting Dual-Channel. Expansion Slots 1 x AGP 8X/4X Slot. 4 x PCI Slots. 3 x ISA Slots. On-Board EIDE 2 x ATA100/66/33 IDE connectors supporting up to 4 IDE devices. On-Board SATA 2 x Serial ATA connectors supporting 2 Serial ATA HDDs. (by ICH5) Integrated Super I/O 1 x Floppy Port. 1 x PS/2 Mouse Port. 1 x PS/2 Keyboard Port. 1 x Gigabit LAN Port. 1 x Parallel Port. 2 x Serial Ports. (1 integrated RS232 COM1 Port, 1 via optional cable for RS232/RS422/RS485 COM2 Port) 8 x USB 2.0/1.1 Ports. (4 integrated, 4 via optional cables) 1 x VGA Port. RAID -- IEEE1394 -- Audio -- LAN Gigabit 10/100/1000 LAN Function. BIOS AMI BIOS. Flash Memory for easy upgrade. Form Factor ATX Form Factor (305mm x 220mm) Other Features Jumper FSB Setting. BIOS Writing Protection. H/M Monitor. STR Function. (optional) Guy ON4AOI ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Error in dx4win.tcp
Hi Folks, I just down loaded the latest version of DX4WIN 6.03. I noticed that the DX4WIN.TCP file has the wrong node address for my node. The correct line should be: NA2NANiskayuna-NY,na2na.net The old address works with out the port 7300 NA2NANiskayuna-NY,na2na.homedns.org Any questions, please ask TNX Will NA2NA na2na.net An AR-Cluster Node 146.93 RF in the Albany, NY area. This node supplies WW spots!!
[Dx4win] VE7CC AR User
www.ve7cc.net Will NA2NA NA2NA.NET an AR-Cluster Node - Original Message - From: Joe Young [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, March 25, 2004 8:29 PM Subject: [Dx4win] VE7CC AR User Can someone point me in the right direction to find info about using this program as a front end for DX4WIN6.02? Thanks and 73 de Joe, W6RLL ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Reports
I would like to print a report with error on the log or Zone and etc It would be nice to print a log page with information. Will NA2NA na2na.net an AR-Cluster node
[Dx4win] DX spotting?
There are few basic node styles. Some have a few different features than others, Some have local spots, some have WW spots. I prefer the WW spots. If DLs are hearing us, we can usually hear them. My node does WW spots. Give it a try if you would like na2na.net Will NA2NA na2na.net an AR-Cluster Node
[Dx4win] Pre- and Post-Conditions
For those that feel your TNC is a desk ornament... check with your local Node Sysop... He may be able to use a spare TNC or two. Many of the nodes put a considerable amount of time and $$ to keep you connected!! Of course it is also nice to have the TNC around for the time when cable or DSL is down during that contest. Will NA2NA na2na.net and AR-Cluster Node If you connect to the net for spots--telnet--this is relatively easy. My TNC is now a desk ornament.
[Dx4win] Telnet issues
Hi Dan and Group I know that there have been some updates to many of the nodes. I have just done an update to my node (na2na.net) that may help disconnects. These effect only AR-Cluster nodes. Many of the ones Jim mentioned are AR-Cluster nodes. Please try my node, many users use it and have no problem (or none that I aware of). Let me know if I can help... Will NA2NA NA2NA.NET An AR-Cluster Node - Original Message - From: [EMAIL PROTECTED] To: DX4WIN@mailman.qth.net Sent: Tuesday, September 16, 2003 10:55 AM Subject: [Dx4win] Telnet issues All: I continue to have telnet connection problems with DX4WIN. For some reason, the connection (to DX4WIN) goes to sleep after anywhere from 20 minutes to 2-1/2 hours. I have tried keeping my connection alive by utilizing other program pinging techniques, but that has not resolved the issue (if I constantly do a sh/dx or other command the DX4WIN spotting connection does not fault). I note that the Beta Logger 32 by K4CY has a keep alive feature built into the telnet spotting feature. I can stay connected forever using this program -- even without user intervention, so I know it is not my internet connection that fails. Am I missing anything in DX4WIN that can mitigate my problem? 73, Dan -- N3ND ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] telnet problem?
Hi Jim, To see if telnet is working from your PC got to a command prompt. At the command prompt type telnet na2na.net (with out the quotes). This will let you know if telnet is working. This is my node here at the house. If that is working, create an entry in DX4Win for my node and then try to connect again. If that does work, you are all set. If not then we have a base line... let me know if that helps. Will NA2NA - Original Message - From: James Jorgensen [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, September 01, 2003 5:43 PM Subject: [Dx4win] telnet problem? I run DX4WIN 5.03 on a computer with operating system Windows Me. I have encountered a problem getting DX spots via telnet. I can set TCP/IP in the preferences and then select an address in the Internet Connections menu, but nothing happens. I do not get connected. I have talked with others using DX4WIN and confirmed that all my settings in DX4WIN are correct. The problem must be with compatability of my version of DX4WIN with the WIndows Me operating system. Has anyone else encountered this problem? If so, how is it fixed? Please resond directly to me, as I am not a subscriber to the list. Thanks, Jim, K9RJ --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] NA2NA Node
Hi Folks, Here is an update to my node. I have currently been running AR-Cluster for my node. The node has been up almost non stop. The node will be available via port 23 (standard telnet). The system is available via na2na.net or the old address na2na.homedns.org/ I am accepting other node connects and any telnet users. The local RF port is 144.93. There will be an antenna upgrade this coming weekend!! Please feel free to contact me you have any questions or concerns TNX Will NA2NA
[Dx4win] NA2NA Node Update
Hi Folks, I would like to thank all of those who have used or checked into my node. It has been great to see the node used and supported. It has been growing slowly!! By a few requests, you can now telnet to my node at NA2NA.NET as well as NA2NA.HOMEDNS.ORG. This should be a bit easier to remember. I will keep supporting both. I still have the ports 23 and 7300 open. Most people are not using port 7300 so that may go away, but not any time soon. Please feel free to contact me with any questions or concerns!! TNX Will NA2NA
[Dx4win] QSL Printing Directly to Cards
Hi Folks, I need to say Thank You to Paul!!! Of course it was a setting on one of my definitions! Humility is humbling! TNX for the support! Will NA2NA - Original Message - From: William Liporace - NA2NA [EMAIL PROTECTED] To: DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Friday, April 11, 2003 7:57 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards I guess there is still something that I am not expressing or that does not work. I was told by one person to try print Labels | QSL Labels in Sequence: This equals 0 Paul suggested Labels Print QSL Labels | Print | Preview. This will show me what is there is 154 cards out of all of my QSOs. When I look at one specific card, I have 61 cards and only 1 is there. I have another that shows 1 and none print. So what ever is going on.. it is not right. At this point, I am getting real frustrated with DX4Win. TNX for any suggestions!! Will NA2NA - Original Message - From: Paul van der Eijk [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED]; DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Thursday, April 10, 2003 10:54 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards Will, When you do an EDIT | Preview, you get enough to see what is going on using dummy data. When you PRINT, you can also select a preview, which will use all available real data to show what will happen. Does that explain what you observe? Paul At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: Hi Folks, I have not done much QSLing in a long time. I am home for a few days and wanted to get caught back up. I have used the same QSL Cards and printer for a long time. I have the same paper definition for the QSL card. When I go into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one that has 61 QSOs listed, but it only prints one card. The one that has 1 does not print the card. I did not want to do my buro list (way too many, but I will print them this weekend..maybe) yet. When I go to Edit | Preview and print, the demo two cards work just fine. The menu on the Top says # of QSOs, but I do not seem to get all of the cards to show up in the print preview. What am I doing wrong?? TNX Will NA2NA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] QSL Printing Directly to Cards
I guess there is still something that I am not expressing or that does not work. I was told by one person to try print Labels | QSL Labels in Sequence: This equals 0 Paul suggested Labels Print QSL Labels | Print | Preview. This will show me what is there is 154 cards out of all of my QSOs. When I look at one specific card, I have 61 cards and only 1 is there. I have another that shows 1 and none print. So what ever is going on.. it is not right. At this point, I am getting real frustrated with DX4Win. TNX for any suggestions!! Will NA2NA - Original Message - From: Paul van der Eijk [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED]; DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Thursday, April 10, 2003 10:54 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards Will, When you do an EDIT | Preview, you get enough to see what is going on using dummy data. When you PRINT, you can also select a preview, which will use all available real data to show what will happen. Does that explain what you observe? Paul At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: Hi Folks, I have not done much QSLing in a long time. I am home for a few days and wanted to get caught back up. I have used the same QSL Cards and printer for a long time. I have the same paper definition for the QSL card. When I go into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one that has 61 QSOs listed, but it only prints one card. The one that has 1 does not print the card. I did not want to do my buro list (way too many, but I will print them this weekend..maybe) yet. When I go to Edit | Preview and print, the demo two cards work just fine. The menu on the Top says # of QSOs, but I do not seem to get all of the cards to show up in the print preview. What am I doing wrong?? TNX Will NA2NA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] QSL Printing Directly to Cards
Hi Folks, I have not done much QSLing in a long time. I am home for a few days and wanted to get caught back up. I have used the same QSL Cards and printer for a long time. I have the same paper definition for the QSL card. When I go into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one that has 61 QSOs listed, but it only prints one card. The one that has 1 does not print the card. I did not want to do my buro list (way too many, but I will print them this weekend..maybe) yet. When I go to Edit | Preview and print, the demo two cards work just fine. The menu on the Top says # of QSOs, but I do not seem to get all of the cards to show up in the print preview. What am I doing wrong?? TNX Will NA2NA
[Dx4win] Version 6.01 and Windows XP
I will second this... I confirmed it on a XP Professional Will NA2NA - Original Message - From: Don Currier [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, January 30, 2003 9:04 PM Subject: [Dx4win] Version 6.01 and Windows XP Hello All, Installed 6.01 on a computer with XP operating system. Few of observations. I like the Alt+S save feature in Version 5.03, and I believe that it should be available in version 6.01, but when I enter a contact in 6.01, and then use the Alt+S keystrokes, DX4WIN closes. The whole program closes, not just my log file. I loaded version 6.01 onto a computer running Windows ME, and I can use the Alt+S feature just fine. Anyone else running 6.01 on XP and having the same problem? Also, I have set the map options to Show Spot Country, but I'm not seeing the spot countries prefix or the country being highlighted on the map as spots roll by on the cluster. Again, just me, or is there a problem? Lastly, and I noticed this on both ME and XP, when I merged my .cty files, there were quite a few contacts that had to be cleaned up to get my country counts correct to what I had in version 5.03. FO prefixes, 3X0C/LU, VK9's, some of my K5K contacts, some of my K1B contacts, some FR stuff, VP6DI contacts, etc., had to be cleaned up. Might not be a bad idea to check up on contacts with multi country prefixes. 73 All Don ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Internet Connections
I just want to remind those who use telnet to their favorite node that you can modify your DX4WIN.TCP file. I like to place my favorite node (mine) at the top of the list so that I do not have to scroll through the list every time I want to connect. Just use your favorite text editor! BTW, my node does not need the port 7300 on it. It will accept both ports 7300 and the standard 23. I hope this saves others time. Great job to the Paul, Steve and all of the Beta Testers!! 73 Will NA2NA telnet na2na.homedns.org http://na2na.homedns.org or http://na2na.homedns.org/cgi-bin/spider.cgi with a Java based WEB front end
[Dx4win] Printing on the back of cards
Good Morning Everyone, I have gotten a few emails on how I get my QSLs to print on the back of my QSL cards and what kind of printer do I use, and a host of other questions. Hopefully I will answer all of you questions. Just as an update, there is a few of us in the area that are doing the same thing. To keep it simple, I hopehere we go: First I went to the printing properties of my printer. I created a paper size of 3.25x5.29 and call it QSL Cards. This will define my QSL Card Stock. Our local club gets cards printed up (Basically a standard QSL Card). The last time, I had 10,000 cards printed up. Hopefully we do not move too soon :-) I then select this paper type in the printer as my current default. The main reason I do this is to make sure that it is what I want for printing. For FYI... I prefer a inexpensive laser printer for my printing. I use a Okidata Okipage 8w. I just can not see paying the $$ for ink cartridges. I think my last two laser cartridges were about $18 ea (not too bad). Then select the custom card setting in DX4WIN. I modify the Custom 1 for my QSL Card. I set it the same 3.25x5.29 and then I set the pitch to be 3x5 (this is just to keep a border on it). Then I select print cards. There is a lot of guys who have Epson and HP printers and love this method. I believe some of them use the tray to feed them. I use the manual feed. Once I start, all I do is feed it the next card and keep on trucking. I can print a lot of QSO at once. Typically what I do is wait till after a contest season and print all of the QSOs for the season on one card. If I work a station on 5 bands for two contests and say 3 bands on two other contests, ALL of the QSOs will fit one card. This took a bit of setting up, but this should make it real easy for most everyone to get it up and rolling. Please let me know if this helps. I will try to answer any questions I can. it may be tough to answer specific questions, but I what the heck.. Will NA2NA http://na2na.homedns.org or telnet to na2na.homedns.org (packet cluster node) - Original Message - From: William Liporace - NA2NA [EMAIL PROTECTED] To: DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Friday, January 10, 2003 11:04 PM Subject: [Dx4win] Printing on the back of cards I see people asking about printing QSLs on the back of Cards. DX4Win does just fine!! I have done a couple of thousand QSOs this way. It will even print multiple QSOs on one card. The only down fall that I see is, it will not allow me to print replies and new QSOs on the same card. But works for me.. Will NA2NA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Freq?
File | Contest Mode | Text to add to QSO note | $$ Will NA2NA http://na2na.homedns.org or telnet to na2na.homedns.org (packet cluster node) - Original Message - From: Dean Norris [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Saturday, January 11, 2003 9:32 PM Subject: [Dx4win] Freq? Where do I put the $$ to get the freq in the comments field? ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX4WIN - Yaesu 1000D connection
The Las Vegas View as Yaesu calls it allows you to see the ROM version. Hold the 1.5 7 MHz button and power up the radio and let go of the buttons. The radio will go through the routine and display Yaesu 6.00 (my current version). My Rig interface is powered from the serial port. Radio type is Yaesu FT1000, Baud Rate is 4800, check Default, It does mention that you need EPROM version 6.0 or later, and RTS High is checked (this is my setup, but it gives you an idea) 73 Will - Original Message - From: Stu [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, January 07, 2003 5:46 AM Subject: [Dx4win] DX4WIN - Yaesu 1000D connection Two questions 1. I am trying to connect my PC with DX4WIN to my FT1000D and can not get the radio connection to work. I keep getting timeouts. Perhaps the radio has an older eeprom. How do I check out the eeprom version. And what is the trick for connection? Second question. I also made up a serial CW cable and can not get that to work either./ Help ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] (no subject)
Try another site and see if it also drops you My node has never peaked out... It seems to only go down due to power outages or occasional upgrades. The only other consideration is how a node handles spots. Does the node have limited spots or full internet spots! Most of my users prefer the world wide spots Will NA2NA na2na.homedns.org http://na2na.homedns.org (web interface to the node) - Original Message - From: Gary E. Jones, Ph.D. [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Saturday, December 28, 2002 10:14 AM Subject: [Dx4win] (no subject) Steve: My favorite dxtelnet site, when loaded with many users, appears to get overloaded with outgoing packets and starts dropping users. It is annoying because I can be working on something else in the room and assuming that the DX3WIN talker is giving me anything new that I need and there isn't anything, but what I discover is that I was disconnected 30 minutes ago. I have looked and don't think that this capability is in the manual, but I wanted to ask... Is there a way that I can have DX4WIN ping the site every x number of minutes and if it is not connected to run a new connect script automatically? IF that is not in there, any chances/plans to put it in the next release?? 73 Gary W5FI --- StripMime Report -- processed MIME parts --- multipart/mixed multipart/alternative text/plain (text body -- kept) text/html text/x-vcard The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. Please post in Plain-Text only.--- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Frequency entry in DX4WIN
OK maybe I am missing something still (more than likely) I have a Yaesu FT-1000D configured to work with DX4WIN. That works fine. I have tried $$ and $$ in the Note for this QSO window with out any success. Is there something else that I need to do? I do not see any settings in the preferences... Is there any other place to do it? I work a few people this morning to try it... TNX Will - Original Message - From: Wendell Wyly W5FL [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Sunday, December 08, 2002 2:03 AM Subject: RE: [Dx4win] Frequency entry in DX4WIN You only put the $$ in the program one time and then it automatically records the exact frequency of each qso after that. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Liporace - NA2NA Sent: Saturday, December 07, 2002 4:31 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Frequency entry in DX4WIN It seems crazy that you have to put the $$ in every QSO... How do you import it from a contest? There really should be an easier way ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Frequency entry in DX4WIN
TNX for all of the replies It works GREAT :-) I told you I was missing something !! Just hit me with 2x4 I get the hint - Original Message - From: William Liporace - NA2NA [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, December 08, 2002 10:43 AM Subject: Re: [Dx4win] Frequency entry in DX4WIN OK maybe I am missing something still (more than likely) I have a Yaesu FT-1000D configured to work with DX4WIN. That works fine. I have tried $$ and $$ in the Note for this QSO window with out any success. Is there something else that I need to do? I do not see any settings in the preferences... Is there any other place to do it? I work a few people this morning to try it... TNX Will - Original Message - From: Wendell Wyly W5FL [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Sunday, December 08, 2002 2:03 AM Subject: RE: [Dx4win] Frequency entry in DX4WIN You only put the $$ in the program one time and then it automatically records the exact frequency of each qso after that. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Liporace - NA2NA Sent: Saturday, December 07, 2002 4:31 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Frequency entry in DX4WIN It seems crazy that you have to put the $$ in every QSO... How do you import it from a contest? There really should be an easier way ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Frequency entry in DX4WIN
Sorry folks.. I thought it was sent to all...here were the two better responses Add the $$ to the pulldown box that opens when you click on QSO and then Contest Mode where it says Text to add to QSO note Click on QSO and click on Contest Mode and then enter $$ in the window that pops up. That will take care of the problem. Works great with my FT-1000MP and shows both xmit and receive freq. - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED] Sent: Sunday, December 08, 2002 1:03 PM Subject: Re: [Dx4win] Frequency entry in DX4WIN So what were you doing wrong - you didn't say! At 11:29 AM 12/8/2002 -0500, you wrote: TNX for all of the replies It works GREAT :-) I told you I was missing something !! Just hit me with 2x4 I get the hint - Original Message - From: William Liporace - NA2NA [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, December 08, 2002 10:43 AM Subject: Re: [Dx4win] Frequency entry in DX4WIN OK maybe I am missing something still (more than likely) I have a Yaesu FT-1000D configured to work with DX4WIN. That works fine. I have tried $$ and $$ in the Note for this QSO window with out any success. Is there something else that I need to do? I do not see any settings in the preferences... Is there any other place to do it? I work a few people this morning to try it... TNX Will - Original Message - From: Wendell Wyly W5FL [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Sunday, December 08, 2002 2:03 AM Subject: RE: [Dx4win] Frequency entry in DX4WIN You only put the $$ in the program one time and then it automatically records the exact frequency of each qso after that. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Liporace - NA2NA Sent: Saturday, December 07, 2002 4:31 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Frequency entry in DX4WIN It seems crazy that you have to put the $$ in every QSO... How do you import it from a contest? There really should be an easier way ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
[Dx4win] Frequency entry in DX4WIN
It seems crazy that you have to put the $$ in every QSO... How do you import it from a contest? There really should be an easier way
[Dx4win] CW keyboard question
I have seen a lot of messages, but yes DX4WIN does support serial keying File | Preferences Radio Tab, CW Keyer and chose either DTR or RTS on radio port. This depends on the radio interface that you use and what pins are being used on the interface (look at the schematics) GL Will - Original Message - From: Barry [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, December 03, 2002 4:41 PM Subject: [Dx4win] CW keyboard question After using DX4WIN for almost 10 years, I just got the urge to try the CW keyboard for the first time. To my chagrin, I find there is no choice of serial ports - it only uses the same COM port as the radio. This is the case in my version 4.07. Do the newer versions of DX4WIN support COM port selection for CW keying? Tnx, Barry -- Barry Kutner, W2UP Internet: [EMAIL PROTECTED] Newtown, PA Frankford Radio Club ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] NA2NA Node Update
OK Folk, For this who asked, there is now a JAVA based access to my node: http://na2na.homedns.org/cgi-bin/spider.bin There is also a link to it fro, http://na2na.homedns.org Let me know what you think This is a node the supports World Wide Spots 73 Will
[Dx4win] Staying Connected to TELNET
There are many different node softwares and each node is slightly different. I have had no complaints from users at my node getting dropped. I run a DXSpider Node. The node is an open node, please login and give it a try. the address is: NA2NA.HOMEDNS.ORG Any questions, do not hesitate to ask 73 Will NA2NA - Original Message - From: STU [EMAIL PROTECTED] To: DX4WIN POSTINGS Dx4win@mailman.qth.net Sent: Tuesday, November 05, 2002 12:05 AM Subject: [Dx4win] Staying Connected to TELNET Is there anyone out there that has a hard time staying connected to TELNET. I have a high speed cable connection that works great for the Internet. No problems! When connecting to a DX cluster via TELNET (with DX4WIN) and the activity is somewhat slow, I seem to get disconnected. During peak times such as contests I stay connected just fine. I understand there is a so called keep alive option either in DX4WIN or some other outside source. The idea is to keep the traffic moving. If windows isn't seeing any traffic from you, (some ISP's as well.) disconnect you so others can use the IP you were on. Is there a setting in DX4WIN using the TCP/IP setting with this so called keep alive feature? Please advise. TNX, 73 STU Please respond to: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Staying Connected to TELNET
I have to agree with Jim, before I created my node, I was rarely ever booted off (dial up days). Of course now, I am never booted off. Of course today there has been two new users who I believe have been connected all day. They other is on almost always connected anyways Anyone is welcome to na2na.homedns.org node Will NA2NA - Original Message - From: Jim Reisert [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Tuesday, November 05, 2002 2:24 PM Subject: Re: [Dx4win] Staying Connected to TELNET Are you guys on nodes with very little traffic? I can connect to W1GQ, KE9KD and K8SMC (also N2TX before it moved) for days at a time, and I'm not actively pinging the connection. In fact, I have two computers connected to two different nodes while I'm at work all day (one wired, one wireless). The only time I lose a connection is if the remote node goes down, or something happens to my router or cable modem. Using ATT Broadband Internet. I don't filter out much besides the stuff above 2 meters. I like to see spots from all over the world. 73 - Jim AD1C = Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC __ Do you Yahoo!? HotJobs - Search new jobs daily now http://hotjobs.yahoo.com/ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win