Re: [Dxbase] internet spots issues
Just as an FYI I feel for your problems I have DXbase running on 3 different Win 10 computers with no issues; a conventional desktop box, an "all in one" and a laptop All of which have run faultlessly since the W10 updates The all in one and laptop were running DXB under Win7 which was upgraded. My desk top is a newer one which came with Win 10 and DXbase was newly installed, but its predecessor was Win 7 upgraded to Win 10 and ran DXB OK In all of these I have DXBase installed in a C:\DXBase directory not under any Windows suggested location I have something in the back of my mind which is suggested here http://www.abrohamnealsoftware.com/ 64 bit compatibility https://www.dropbox.com/s/w181ed1bthlw6t3/ConvertRegTo64DXbase.txt?dl=0 Maybe that helps? 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Crownhaven" To: hankk...@aol.com Cc: "dxbase@mailman.qth.net" ; "dxb...@groups.io" Sent: 13/07/2020 22:25:14 Subject: Re: [Dxbase] internet spots issues Hank, watching with interest. I have never been able to run DXB on WIN10. I can load it but unable to import log. Been at it for several years. :))). Plenty of guys have done it though. Steve, N4JQQ On Jul 13, 2020, at 3:10 PM, Hank Kiernan via Dxbase wrote: recently I got a new Win 10 computer and amongst other things imported DXBase program and files to it. this replaced a Win 7 machine on which I have used dxbase for many years. when setting up the new machine I simply mirrored every election from the old machine, such as alerts, internet, etc. couple of questions have developed as I use it. - the DX Info screen: my old Win 7 machine in the "origins" column shows the call of the station making the spot (which is useful especially on 6 meters where propagation differences are extreme). the new Win 10 machine "origins" column only shows 1 or 2 letters - can't even tell it's a call. just "F" or "L" or "B" e.g. (and yes I have plenty of room in column to fit any length call). strange, can't figure out why doesn't show full call - Internet cluster screen:a) Win 7 machine in Alert column shows "DX" next to every spot (with either "x" or check mark in QSY column) Win 10 machine does not show anything in either column for many spots. why? (no difference in my user options alerts chart compared to Win 7) also it doesn't update previous qso toollbar or summary window for a spot with no "DX" notation. why are some spots not being marked "DX"??? b) Win 7 machine - I can click on any spot and the summary window and previous qso toolbar are both updated for that call. Win 10 machine - clicking on a spot does not update anything either summary window or previous qso toolbar. this is true whether or not there is a "DX" in alert column nuisance because I often do this to check whether I have worked the spotted station before hope somebody can help with these questions. Hank KF2O __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] IC7610
Hi All Could someone help me please with the settings to put in radios.ini for the Icom 7610 Thanks 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Running DXB From Second Location
Hi Steve I faced this problem whilst living overseas After a few "forgotten memory stick" problems I was told about DropBox and have been using it ever since You can point DXbase to the DropBox location so it always opens the latest log You also get multiple version back ups in Dropbox although I still make local backups periodically on a USB HDD Since then other similar services heve come along like Google drive and OneDrive but I have not changed from DropBox 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Crownhaven" To: "k...@comcast.net" Cc: dxb...@yahoogroups.com; dxbase@mailman.qth.net Sent: 29/11/2019 00:44:09 Subject: [Dxbase] Running DXB From Second Location Guys, another question. I have several but one at a time. What is procedure if you are running DXB from second QTH, second home. Run second copy of program? Or would files become crossed up? Thanks, Steve, N4JQQ On Nov 27, 2019, at 11:32 PM, Crownhaven wrote: Thanks Bruce, Joe! On Nov 27, 2019, at 11:01 PM, "k...@comcast.net" wrote: Yes, I use it every day. Bruce KS4V Original message From: Crownhaven Date: 11/27/19 5:53 PM (GMT-06:00) To: dxbase@mailman.qth.net, dxb...@yahoogroups.com, wa6...@verizon.net Subject: [Dxbase] Bridging WSJT/X I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? Thanks Steve, N4JQQ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Upload Issue
Steve You could edit the ADIF file? Or go into the logbook and change the "QSLS" column for those 9 QSOs back to No (from LOTW) 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Crownhaven" To: "DXBase Reflector" Sent: 17/10/2019 00:43:06 Subject: [Dxbase] Upload Issue I routinely upload to LOTW using selection wizard, creating file and then sending it along after its signed. I attempted to upload a file that had nine Qs in it. When I tried to send it up, there was an error in one of the QSOs according to LOTW. So, I stopped the upload and repaired the QSO. However, when I created another file to send up, the program correctly remembered that I had sent up everything. I did this once years ago. There is a way to go back and trick the creation of the file to include those last nine Q's but I cannot for the life of me recall it. Any ideas? Kind regards and 73 Steve, N4JQQ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] For FTDX101D Users -- Final Radio ini file entry for the rig
Many thanks to Joe who did all the HARD work!! He does a great job of keeping DXBase alive - its still one of the best. Thanks Joe!! 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Joseph Glockner via Dxbase" To: dxbase@mailman.qth.net Sent: 07/07/2019 22:01:42 Subject: [Dxbase] For FTDX101D Users -- Final Radio ini file entry for the rig Fred Handscombe (G4BWP) has tested the following version ofthe FTDX101D Radios.ini file entry with Complete SUCCESS -- Thank You FRED!! NOTE Important -- be sure to setup the "232C TIME OUT TIMER" option within the FTDX101D rigto 100ms vice default 10ms.. Here is the entry: [Yaesu_FTDX101D_SPLITOK] P_LSB=1 P_USB=2 P_CW_USB=0 P_CW_LSB=0 P_AM=5 P_FM=4 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=3 P_FSK=6 P_RTTY=6 P_PACKET=8 P_CWR=7 LSB=1 USB=2 CW=3 FM=4 AM=5 FSK=6 RTTY=6 CWR=7 PACKET=8 HIGH=3 MEDIUM=2 LOW=1 OFF=0 ON=1 FREQDIVIN=1 FREQDIVOUT=1 USEEXTENDEDMODES=0 FREQSHIFT=0 PACING=6 SPLIT_ON=1 SPLIT_OFF=0 DefaultCW=3 DefaultAM=5 DefaultFSK=6 DefaultRTTY=6 DefaultFM=4 DefaultCWR=7 SelectVFOA= asc("VS0;") eoc(10) SetVFOA= asc("MD0") dec( %mode, 1 ) asc ( ";" ) asc("FA") dec(%vfoa,9) asc(";") asc("FT2;") eoc(10) GetVFOA= asc("FA;") rrs(12) eoc(10) PrsVFOA= asc("FA") dec(%vfoa,9) asc(";") eoc(10) SelectVFOB= asc("VS1;") eoc(10) SetVFOB= asc("MD1") dec( %mode, 1 ) asc ( ";" ) asc("FB") dec(%vfob,9) asc(";") asc("FT3;") eoc(10) GetVFOB= asc("FB;") rrs(12) eoc(10) PrsVFOB= asc("FB") dec(%vfob,9) asc(";") eoc(10) SetMode= asc("MD0") dec(%mode,1) asc (";") eoc(10) GetMode= asc("MD0;") rrs(5) eoc(10) PrsMode= asc("MD0") dec(%mode,1) asc (";") eoc(10) SetSplit= eoc(10) GetSplit= asc("FT;") rrs(4) eoc(10) PrsSplit= asc("FT") dec(%split) asc (";") eoc(0) 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] FTDX101D
Hi All Has anyone worked out the settings to go in RADIOS.INI for the new FTDX101D please? Or is another will another Yaesu model work? Thanks 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Selection Wizard Issue...again
You have to get a new registration file with ALL the callsigns in it, or just put the registered call in the field as it serves no other purpose anyway, you need 1 log file per on the air callsign. I have one with 5 or 6 of my personal calls in various countries I had many robust discussions with Jack on the subject but he wouldn’t budge! 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Bill - KL7TC" To: "Fred Handscombe" ; dxbase@mailman.qth.net Sent: 19/06/2019 16:18:38 Subject: Re: Re[2]: [Dxbase] Selection Wizard Issue...again Well that's lame because what happens if you had 2 callsigns? On Wed, Jun 19, 2019 at 6:58 AM -0800, "Fred Handscombe" wrote: If the Opr Call is not the registered one then DXbase will not export any contacts If you "find and replace" the Opr Call with the registered one through the whole log then it will work for you The registered Opr Call was Jack's original way of stopping bootleggers 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Bill - KL7TC" To: "Fred Handscombe" ; dxbase@mailman.qth.net Sent: 19/06/2019 15:02:11 Subject: Re: [Dxbase] Selection Wizard Issue...again >It is different > > > > >On Tue, Jun 18, 2019 at 11:32 PM -0800, "Fred Handscombe" > wrote: > >>Bill >> >>Does the Opr Call in his log match the registered callsign? >> >>You can check in Help > About... >> >>That is the cause of many problems in DXbase >> >>I can confirm that the Selection Wizard with no tick marks in the QSO >>Filters page WILL export the entire log under Windows 10 >> >>73 Fred >>G4BWP >> >>www.g4bwp.com >>Hoarder of fine valved radios >> >>-- Original Message -- >>From: "Bill - KL7TC" >>To: "Dxbase@mailman.qth.net" >>Sent: 19/06/2019 07:34:01 >>Subject: [Dxbase] Selection Wizard Issue...again >> >> >Trying to export my dad’s 2007 log to adif using the selection wizard. I have used it in the past on mine with no issues. >> > >> >1. No checks blocks >> >2. Tried test first and no test, nothing happens. >> >3. When I click start, it opens the location and when hit ok, nothing happens. >> > >> >I was trying it at his house and mine with same result…nothing. There are 2373 qsos in the log. >> > >> >Not sure what the issue is…unless it’s a Windows 10 issue. >> > >> >Thanks and 73, >> >Bill – KL7TC >> >Fairbanks, Alaska BP64DU >> > >> > >> >Sent from Mail for Windows 10 >> > >> >__ >> >Dxbase mailing list >> >Home: http://mailman.qth.net/mailman/listinfo/dxbase >> >Help: http://mailman.qth.net/mmfaq.htm >> >Post: mailto:Dxbase@mailman.qth.net >> > >> >This list hosted by: http://www.qsl.net >> >Please help support this email list: http://www.qsl.net/donate.html >> >> __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Selection Wizard Issue...again
If the Opr Call is not the registered one then DXbase will not export any contacts If you "find and replace" the Opr Call with the registered one through the whole log then it will work for you The registered Opr Call was Jack's original way of stopping bootleggers 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Bill - KL7TC" To: "Fred Handscombe" ; dxbase@mailman.qth.net Sent: 19/06/2019 15:02:11 Subject: Re: [Dxbase] Selection Wizard Issue...again It is different On Tue, Jun 18, 2019 at 11:32 PM -0800, "Fred Handscombe" wrote: Bill Does the Opr Call in his log match the registered callsign? You can check in Help > About... That is the cause of many problems in DXbase I can confirm that the Selection Wizard with no tick marks in the QSO Filters page WILL export the entire log under Windows 10 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Bill - KL7TC" To: "Dxbase@mailman.qth.net" Sent: 19/06/2019 07:34:01 Subject: [Dxbase] Selection Wizard Issue...again >Trying to export my dad’s 2007 log to adif using the selection wizard. I have used it in the past on mine with no issues. > >1. No checks blocks >2. Tried test first and no test, nothing happens. >3. When I click start, it opens the location and when hit ok, nothing happens. > >I was trying it at his house and mine with same result…nothing. There are 2373 qsos in the log. > >Not sure what the issue is…unless it’s a Windows 10 issue. > >Thanks and 73, >Bill – KL7TC >Fairbanks, Alaska BP64DU > > >Sent from Mail for Windows 10 > >__ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Dxbase@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Selection Wizard Issue...again
Bill Does the Opr Call in his log match the registered callsign? You can check in Help > About... That is the cause of many problems in DXbase I can confirm that the Selection Wizard with no tick marks in the QSO Filters page WILL export the entire log under Windows 10 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Bill - KL7TC" To: "Dxbase@mailman.qth.net" Sent: 19/06/2019 07:34:01 Subject: [Dxbase] Selection Wizard Issue...again Trying to export my dad’s 2007 log to adif using the selection wizard. I have used it in the past on mine with no issues. 1. No checks blocks 2. Tried test first and no test, nothing happens. 3. When I click start, it opens the location and when hit ok, nothing happens. I was trying it at his house and mine with same result…nothing. There are 2373 qsos in the log. Not sure what the issue is…unless it’s a Windows 10 issue. Thanks and 73, Bill – KL7TC Fairbanks, Alaska BP64DU Sent from Mail for Windows 10 __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] missing database at startup
Hi Jim I have that T shirt! On my PC in C:\Windows there is a file called "Dxb2007" labelled configuration settings Note NOT the same file in your DXBase2007 install directory The config file is flat text so can be edited with Notepad etc Scroll down the to section headed [DIR} Below that you can enter the path for the new location of your log book under DATAPATH, then it should find it Ok and boot Best to save DXBase config with a new name first! 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Jim Spears" To: dxbase@mailman.qth.net Sent: 14/06/2019 12:08:34 Subject: [Dxbase] missing database at startup I had a system crash and the machine on which a DXbase2007 database resided no longer exists. This situation has been cleaned up except for one system which had the prompt for database and column order at startup enabled. Now when I start DXbase on that system, an error box appears (which is OK) but when OK is clicked, DXbase exits without giving me a chance to correct the error condition. Where is this prompt stored in configuration data? It must be somewhere that I can modify. Else it appears that the only recourse is to reinstall the program. Jim/N1NK __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DXBase and IC7610
Greg Cut and paste all the below into "RADIOS.INI" found in your DXBase2007 install directory Make a backup first of course 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios [ICOM_IC-7610] #IC-7610 revision by WA6AXE P_LSB=0 P_USB=1 P_CW_USB=0 P_CW_LSB=0 P_AM=2 P_FM=5 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=3 P_FSK=4 P_RTTY=4 P_PACKET=4 P_CWR=3 LSB=0 USB=1 AM=2 CW=3 FSK=4 RTTY=4 FM=5 CWR=3 HIGH=1 MEDIUM=2 LOW=2 Address=0x98 PACING=5 FREQDIVIN=1 FREQDIVOUT=1 USEEXTENDEDMODES=0 FREQSHIFT=0 DefaultCW=3 DefaultFSK=4 DefaultRTTY=4 DefaultFM=5 DefaultAM=2 DefaultCWR=3 SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd) eoc(100) SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd) eoc(100) GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100) PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0) SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d1) hex(fd) eoc(100) SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd) eoc(100) GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100) PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0) SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd) eoc(100) GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100) PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0) SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter") hex(fd) eoc(100) GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100) PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter") hex(fd) eoc(0) SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd) eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd) eoc(100) GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12) eoc(100) PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0) -- Original Message -- From: gya...@dreamscape.com To: dxbase@mailman.qth.net Sent: 20/05/2019 01:50:35 Subject: [Dxbase] DXBase and IC7610 Is any one using DXBase with an IC7610? If so, would you share your settings? I have been trying to get DXBase to talk to 7610 without any success. Thanks, Greg, WB2BIN __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] Fw: Re: DXB radio.ini
Ben Comcast is now bouncing my mails to you as if they are spam? Tried to send a screen shot of my Radio 1 but rejected 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Forwarded Message -- From: "Ben Akins" To: "Fred Handscombe" Sent: 12/05/2019 13:53:44 Subject: Re: DXB radio.ini Good morning, Fred, Joe and I are wondering what your setup is for radio one. Ben __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Windows 10 OS
Steve I have upgraded a few of my PCs that use Dxbase 2007 and have not had any issues or problems with any of them A desk top, a laptop and an all in one 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios -- Original Message -- From: "Crownhaven" To: dxbase@mailman.qth.net Sent: 05/04/2019 15:52:29 Subject: [Dxbase] Windows 10 OS Sending this to both groups.. Well, I'm still running 2007 on an XP laptop. Worried about its life, etc. I am running WIN7 on other machines but understand Windows 10 may be the best way to go for a new machine for DXB. I'm not intuitive with software, etc. Is there a version of Windows 10 I should look for? Pro, Home, etc.? And I'm wondering how complex it is to get 2007 running on a WIN10 computer. I do not want to change to another logging program. DXB works perfectly for me. I would like to hear some suggestions if you don't mind. Steve, N4JQQ, waiting for my last one, 3Y0 __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Icom 7300
Ben There is a file called "Radios.ini" in your DXBase directory First find that file and make a copy and keep it safe!! Cut and past the below on to the bottom of that file and "Icom_IC-7300_SPLITOK" will appear as a radio option 73 Fred G4BWP f...@g4bwp.com www.g4bwp.com Hoarder of fine valved amateur radios [ICOM_IC-7300_SPLITOK] P_LSB=0 P_USB=1 P_CW_USB=0 P_CW_LSB=0 P_AM=2 P_FM=5 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=3 P_FSK=4 P_RTTY=4 P_PACKET=4 P_CWR=7 LSB=0 USB=1 AM=2 CW=3 FSK=4 RTTY=4 FM=5 CWR=7 HIGH=1 MEDIUM=2 LOW=2 Address=0x94 PACING=5 FREQDIVIN=1 FREQDIVOUT=1 USEEXTENDEDMODES=0 FREQSHIFT=0 DefaultCW=3 DefaultFSK=4 DefaultRTTY=4 DefaultFM=5 DefaultAM=2 DefaultCWR=7 SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(00) hex(fd) eoc(100) SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd) eoc(100) GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100) PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0) SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(01) hex(fd) eoc(100) SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd) eoc(100) GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100) PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0) SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd) eoc(100) GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100) PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0) SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter") hex(fd) eoc(100) GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100) PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter") hex(fd) eoc(0) SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd) eoc(100) GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(fd) rrs(13) eoc(100) PrsSplit= hex(%dummy, 11) hex(%split) hex(%dummy) eoc(0) On 26/11/2018 13:42, kb1fj Akins wrote: Hello everyone. I haven't been active for some time now. I have recently purchased the IC7300 and I noticed that this rig is not included in the list at setup. How do I deal with this problem. Is there an updated list available? Thanks, Ben, KB1FJ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Z6 Update for DXBase
As sent out by the Daily DX today Country - Republic of Kosovo Prefix - Z6 Start date (not official yet) - January 21, 2018 1 hour a head of UTC CQ Zone - 15 ITU Zone - 28 Continent - Europe Longitude - 21.17 East Latitude - 42.67 North ADIF Entity - 522 Just entering as your mail came 73 Fr4ed On 23/01/2018 15:33, Richard Solomon wrote: Now that Kosovo looks like it will be added to the "List", does anyone have the numbers to update the DXBase Country List ? Tnx, Dick, W1KSZ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] How to add FT8 as a submode in DXBASE ?
It appears once you have edited the file I mentioned and you can also log FT8 under mode "DATA" and select from, SUBMODE 73 Fred On 30/12/2017 12:36, Stig Lindblom wrote: Using DXBASE v.1.10 Is there a way to include (add) FT8 under TOOL/OPTIONS/USER OPTIONS/DEFAULT PSK SUBMODE ? That way it will show up in LoTW (via tQSL) as correct DIGI submode ? Happy New Year to everyone. 73 de LA7JO Stig __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] How to add FT8 as a submode in DXBASE ?
Hi Stig Edit the file "modenames.dat" which is in the DXBase install directory (on my computer) GL 73 HNY Fred G4BWP On 30/12/2017 12:36, Stig Lindblom wrote: Using DXBASE v.1.10 Is there a way to include (add) FT8 under TOOL/OPTIONS/USER OPTIONS/DEFAULT PSK SUBMODE ? That way it will show up in LoTW (via tQSL) as correct DIGI submode ? Happy New Year to everyone. 73 de LA7JO Stig __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DxBase2007 windows 10 with dual monitors problem.
Mike I'm pretty sure this has come up before and DXbase will only "work" on the main monitor Not that I have ever trued, I like radios in my shack not screens :-) 73 Fred G4BWP On 12/08/2017 02:29, Michael Bogard wrote: I am running DxBase2007 and windows 10 with dual monitors and the windows won't stay were I put them on the second monitor. The main monitor is numbered two and is on the left if that makes a difference. This worked fine with windows XP and the same monitors. Any help you can give on this problem would be greatly appreciated . Mike w0mb __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DX info window blank
Thanks to Ian G4GIR for forwarding a previous email conversation with Joe WA6AXE (who else!!!) I replaced two PKT*.WID files and GL.WID from another working copy on my work laptop and it is now all Ok Many thanks 73 Fred G4BWP On 10/08/2017 09:54, Fred Handscombe wrote: Hi All # My "DX info" window has gone blank I'm sure I read about this before but Yahoo groups search function is pretty useless with 2 common words I remember a file has to be deleted but which one? Thanks Fred G4BWP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] DX info window blank
Hi All # My "DX info" window has gone blank I'm sure I read about this before but Yahoo groups search function is pretty useless with 2 common words I remember a file has to be deleted but which one? Thanks Fred G4BWP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] Fwd: EXTRA Info ---- Re: IC7300 CW-R
Hi All Joe WA6AXE has been emailing me and has solved this CW-R issue If you have an IC7300 and want to use CW-R then thank Joe!! See the settings below Many thanks to Joe again! 73 Fred G4BWP Forwarded Message Subject:EXTRA Info Re: [Dxbase] IC7300 CW-R Date: Thu, 1 Jun 2017 17:56:48 + From: Joe WA6AXE <wa6...@hotmail.com> To: Fred Handscombe <f...@g4bwp.com> Fred, TRY this -- NOTE!! Since I do not have an IC-7300 -- I am only taking a guess on this fix ... In the Radios.ini file for [ICOM_IC-7300_SPLITOK] CHANGE the following entry from P_CWR=3 to read P_CWR=7 THEN - CHANGE the following entry from CWR=3 to read CWR=7 THEN - CHANGE the following entry from DefaultCWR=3 to read DefaultCWR=7 Then SAVE your Radios.ini file and execute DXbase2007 again and this time - try to log CW-R Fred --- In DXbase2007 Radios.ini file -- if the MODE is NOT part of what DXbase was built-around .. We normally set that mode to ZERO .. But, for the sake of CW versus CW-R -- ICOM has CW as a 3 and CW-R as a 7 And,. since DXbase2007 doesn't have a CW-R -- I am NOT too sure that the above mentioned FIX will even work... You might ask Neal for some assistance on this also!! 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] IC7300 CW-R
Hi All I am using the settings form one of these lists as [ICOM_IC-7300_SPLITOK] The issue I have is that the CW-R (reversed sideband CW) is not recognised by DXbase My MicroHam rig interface router reds CW-R OK but DXBase logs it as DIGI and PSK31 The mode related part of radios.ini is below Any ideas? Thanks 73 Fred G4BWP P_LSB=0 P_USB=1 P_CW_USB=0 P_CW_LSB=0 P_AM=2 P_FM=5 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=3 P_FSK=4 P_RTTY=4 P_PACKET=4 P_CWR=3 LSB=0 USB=1 AM=2 CW=3 FSK=4 RTTY=4 FM=5 CWR=3 HIGH=1 MEDIUM=2 LOW=2 Address=0x94 __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] From the ARRL website -- KH4 (Midway) and KH7K (Kure) are now DELETED entities
Joe I would relax for a week and see what comes out when ARRL goes back to work on Monday Many think this smells of fish - Poisson d'Avril 73 Fred On 01/04/2017 02:33, Joseph Glockner wrote: Since the following words came straight from the ARRL website - I am going to call this a real thing and not an April Fools Day prank... I will be updating my MDB CHECKER program and will send out another email when I am done -- but, since these TWO DELETIONS are really very straight-forward in what the DXbase2007 user has to do .. On the Refdata.mdb file -Go to DXbase2007 Main Menu / Tools/ Database Access.../ Primary tab / and scrolldown to KH4 and make a CHECKMARK under the DELETED column. Then scrolldown a bit further and find KH7K and make a CHECKMARK under the DELETED column. Click-on another entity to SAVE the modification.. THAT IS IT!!! Nothing you have to do with your Logbook mdb file... You are now done with the updates.. HERE are the words from the ARRL website Midway and Kure Islands are Now Deleted DXCC Entities 03/31/2017 Midway and Kure Islands have been placed on the list of DXCC deleted entities, effective August 26, 2016. This came about as an unintended consequence of action last summer by then-President Barack Obama that expanded the Papahānaumokuākea Marine National Monument to include the northwestern Hawaiian Islands west of Ni’ihau Island, making it the largest contiguous protected conservation area under the US flag. Midway (KH4) had qualified for DXCC status by virtue of its being governed by a separate administration. Because it is now under the administration of Papahānaumokuākea Marine National Monument, however, it becomes a deleted entity. Approximately 50 people live on Midway, including US Fish and Wildlife Service staffers and contractors. The Battle of Midway, a turning point in the Allied World War II Pacific Campaign, took place in June 1942. Now uninhabited, Kure Island (KH7K), a part of Hawaii, is separated from the rest of the state by Midway; because of that, it qualified for DXCC status under Section II, 2 (b) (iii) of the DXCC Rules — separation from its “parent” Hawaii. Midway Island’s change in DXCC status in turn made Kure Island no longer eligible for DXCC status, since Kure no longer is separated from the rest of Hawaii by intervening land or islands that are part of another DXCC entity. Kure Island once was home to a US Coast Guard LORAN station, remnants of which are still evident. It has been a state wildlife sanctuary since 1981. The relevant parts of Section II of the DXCC Rules follow: A Geographic Separation Entity may result when a single Political Entity is physically separated into two or more parts. The part of such a Political Entity that contains the capital city is considered the Parent for tests under these criteria. One or more of the remaining parts resulting from the separation may then qualify for separate status as a DXCC Entity if they satisfy paragraph a) or b) of the Geographic Separation Criteria, as follows. b) Island Areas (Separation by Water): A new entity results in the case of an island under any of the following conditions: iii) The island is separated from its Parent by intervening land or islands that are part of another DXCC entity, such that a line drawn along a great circle in any direction, from any part of the island, does not touch the Parent before touching the intervening DXCC entity. There is no minimum separation distance for the first island entity created under this rule. Additional island entities may be created under this rule, provided that they are similarly separated from the Parent by a different DXCC entity and separated from any other islands associated with the Parent by at least 800 km. Neither Midway nor Kure was able to be activated without prior permission and only for a planned DXpedition. Only contacts made on August 25, 2016, or earlier will count for these two entities. - JUST FYI to all DXbase users. 73, Joe WA6AXE Joseph Glockner wa6...@verizon.net __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] Lost DX info window content
Hi All HNY I lost the contents of both my DX Info window and the Summary window I searched the archives and found the cure for the Summary window (deleting the SVIEWHF files) Any ideas how to restore the DX Info window? A file to delete? Thanks 73 Fred G4BWP -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] AN400U = EA8
More info today from 5B4AHJ at Clublog AN400R has been on from EA9 However the locations of all these AN400x stations are NOT fixed and can change DXCC WFWL and keep an eye on Clublog 73 Fred G4BWP On 23/09/2016 08:38, Fred Handscombe wrote: GM There a number of AN400 (four hundred) calls active at the moment These all map to Spain - EA in DXBase AN400U is in EA8 So you need to map this callsign separately 73 Fred G4BWP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] AN400U = EA8
GM There a number of AN400 (four hundred) calls active at the moment These all map to Spain - EA in DXBase AN400U is in EA8 So you need to map this callsign separately 73 Fred G4BWP -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] VK9NT
Hi All VK9NT is currently active from Norfolk Island but DXbase thinks it in the deleted Territory of New Guinea I have just changed my callsign mapping but a perfectionist might find the date of the deleted of TNG and map the current and old calls by date! 73 Fred G4BWP -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Interesting Problem
Spot on Joe I'm sure That is one crazy system! 73 Fred G4BWP On 25/04/2016 18:10, Joseph Glockner wrote: Dick, One question -- what was the OPRCALL assigned to those 26 QSOs? If the OPRCALL on those QSOs is NOT in your reg file - they will not show-up in the totals, etc ... 73 Joseph Glockner wa6...@verizon.net -Original Message- From: Richard SolomonTo: DXBase Sent: Mon, Apr 25, 2016 12:05 pm Subject: [Dxbase] Interesting Problem I am importing an Adif file into one of my DXBase .mdb files. All the Q's show in the Log when I finish. I then Initialize the tables. However, when I Initialize the tables, only 369 of the 395 Q's show up as read. The Adif import file had 26 Q's in it. When I try to use Selection Wizard and bracket the QSO dates for the 26 new Q's, nothing shows up in the QSO Records area. Any ideas ? Tnx, Dick, W1KSZ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Database problem?
Glenn Check the entry in the "Opr Call" column DXbase has a bizarre way of "regulating" the licensed copy If the Opr Call is not one on your "licence" they do not export or print but you NEVER get a flag or anything! 73 Fred On 09/04/2016 17:57, Glenn Johnson wrote: I have 68,000 entries in my log and all are available for QSLing. However, when I export to ADIF, only 25,000 entries are exported. Also, if I have a list of 50 QSL labels to print, when I send them to the output to print, there might be only a dozen labels. Ideas?? Thanks! Glenn W0GJ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] IC7851
Well I answered my own question!! Microham wants the Icom radio address to be 7A So I had changed the radio settings I had not edited the Radios.ini to match! I'm not sure why Icom cling on to their CI-V system when everyone else is on RS232 or USB! 73 Fred On 14/03/2016 12:42, Fred Handscombe wrote: Hi All Has anyone got an IC7851 working with DXbase I've been loaned one but cannot get it to read the frequency I am using the MicroHam interface which reads it OK as an IC7800 but DXbase doesn't Thanks __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] IC7851
Hi All Has anyone got an IC7851 working with DXbase I've been loaned one but cannot get it to read the frequency I am using the MicroHam interface which reads it OK as an IC7800 but DXbase doesn't Thanks -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] 2K/GK/MK mapping
Hi All Below from 425DX News G - From 1 January to 31 December 2016 the prefixes GK, MK, and 2K will indicate a station operating from Cornwall and the Isles of Scilly. The Regional Secondary Locator "K" stands for Kernow, i.e. Cornwall in Cornish language, and has been made available for a period of up to one year on a temporary and optional basis. Information on "The Kernow Award", offered by the Poldhu Amateur Radio Club, at http://gb2gm.org/index.php/the-kernow-award. In my Dxbase 2K maps to GJ - WRONG GK maps to G OK MK is not mapped at all! GK0JFK was used once before in the quite distant past (early 80s) from the JFK Memorial at Runnymede, technically a small piece of land which is US territory near London but doesn't count as such for DXCC! https://en.wikipedia.org/wiki/Runnymede#John_F._Kennedy_Memorial Happy Christmas to everyone 73 Fred -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] ZL90IARU - only New Zealand
Hi DXbase-ers Beware that ZL90IARU (ninety) is plain New Zealand ZL and NOT ZL9 :-( 73 Fred G4BWP -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] One more! TX90IARU = FK
Hi All FK8IK is self spotting TX90IARU as being in FK DXBase maps to F 73 Fred G4BWP -- 73 Fred G4BWP - A65BD https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DXBase2007 ver.1.10 shutdown problem
Nick There is a DXBASE.INI file in C:\windows even if you install DXbase in C:\ It does not remove if you remove and reinstall DXbase. If you delete that you will get rid of the "unable to shut down" issue It has come up a few times on here before. I think that file somehow gets corrupted 73 Fred G4BWP On 15/12/2015 17:28, Nick Mironov via Dxbase wrote: Hi Neal, The SUMMARY window suddenly became corrupted this morning. I have some experience with this problem and delete sviewhf both files.After that DXBase was opened again, Summary appered as blanc.When i try to close DXBase I get message (in russian lenguage smg like "Wrong; inadmissible; intolerable, impossible argument" - my translation to English. The only way to get out - is rebooting of computer. Windows7 32 bits, DXBase2007 v.1.10 What shell we do? 73, Nick UX4UA __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] New Computer - DXBase Not Registered After Key in Registry
Ken Very vague memory You have to edit the licence key if your system is 64 bit? Something like that? I've got DXBase running OK on 3 Win 10 updated PCs but they were upgrades not fresh install 73 Fred G4BWP On 14/11/2015 06:26, Ken Widelitz wrote: I've moved to a new Win 10 computer. I've installed the DXBase 2007 download and clicked on my Reg Key. I get a message that it has been placed in the registry. When I open DXBase, it tells me it is not registered. Any suggestions? 73, Ken, K6LA / VY2TT __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] E6 entry in database
Hi All If you are chasing E6GG be aware the country database entry is WRONG It has a typo in the longitude for E6 as "_169.8" It should be +169.8 Then the beam headings and SR/SS times work correctly 73 Fred G4BWP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Another Future Feature Request
Yes please In addition please make a "tone" of A allowed Auroral QSOs exchange an RST (even on phone ) of nnA (eg 59A) to indicated the auroral tone on the signal Thanks 73 Fred G4BWP On 19/09/2015 04:33, Walter Miller, AJ6T wrote: Hello Neal, When the next version of DXBase is released, please include an expanded capability for signal reports. The old standard RS(T) system does not cover the types of reports now commonly used in some of the new digital transmission modes. One important case is the WSJT-X JT65 reporting schema that runs from -01 to -24. On some of the meteor scatter modes (FSK441, JT6M, etc.) a 26 or 27 report is common (and it sorta fits into the standard RS reporting schema), and in some contests the grid square is the "report." It would be nice to be able to print out these various report variations on DXBase QSL labels. I'm sure there are other formats in use as well. 73, Walt, AJ6T __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Switching between Radio 1 and Radio 2
Hi Neal After all these years I had never looked at the band plan, it took some finding I cant see how a "band plan" is relevant to which radio I use though, unless I had one radio for HF and another one for VHF which I don't If I select "DISABLE" for each entry what happens? Does it "disable" the radios or disable the "band plan"? I do not want a band plan to select which radio I use! As a supplementary question where is the "alternate" band plan to be found? (Mentioned in the Log Defaults tab of user options? Were you able to replicate Dave's original problem in that Radio 2 cannot be selected using the menus? Thanks 73 Fred On 02/09/2015 22:37, Neal Campbell wrote: Fred Is that because you haven't set the band map properly? 73 Neal Campbell Abroham Neal LLC *** 10 DAY COMPUTER SALE NOW IN PROGRESS!! *** On Wed, Sep 2, 2015 at 5:11 PM, Fred Handscombe <fre...@homeshack.freeserve.co.uk <mailto:fre...@homeshack.freeserve.co.uk>> wrote: Hi Dave I use the button on the "QSO" tool bar which is at the top of my screen with a number "2" in it It toggles between 2 and 1 and has a blue background when 2 is selected. When 2 is selected it does log the data for Radio 2 The menu item Tools > use Radio 2 doesn't work as you have found !!! That can be selected, in theory at least, by using ALT-T then U which is no help as it doesn't work. The tool bar button DOES work though. What I have found however is that even if you select radio 2 and spot you click on only ever goes to radio 1 which is pretty annoying! 73 Fred G4BWP On 02/09/2015 20:38, Dave G3RXP wrote: I have two radios connected to my shack network, and in DXBase, I can select Radio2 by clicking on the icon in Tools/radio2, But how do I get back to Radio1. I can close dxbase down and start it up again but Im sure there is a better way. Maybe there is a Keyboard short key but I couldnt find it on the help screen. Thanks Dave G3RXP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net <mailto:Dxbase@mailman.qth.net> This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net <mailto:Dxbase@mailman.qth.net> This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Switching between Radio 1 and Radio 2
Hi Dave I use the button on the "QSO" tool bar which is at the top of my screen with a number "2" in it It toggles between 2 and 1 and has a blue background when 2 is selected. When 2 is selected it does log the data for Radio 2 The menu item Tools > use Radio 2 doesn't work as you have found !!! That can be selected, in theory at least, by using ALT-T then U which is no help as it doesn't work. The tool bar button DOES work though. What I have found however is that even if you select radio 2 and spot you click on only ever goes to radio 1 which is pretty annoying! 73 Fred G4BWP On 02/09/2015 20:38, Dave G3RXP wrote: I have two radios connected to my shack network, and in DXBase, I can select Radio2 by clicking on the icon in Tools/radio2, But how do I get back to Radio1. I can close dxbase down and start it up again but Im sure there is a better way. Maybe there is a Keyboard short key but I couldnt find it on the help screen. Thanks Dave G3RXP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Strange Problem -- Options / Internet - The parameter is incorrect
Hi Joe I'm using W8.1 64 bit and I don't see this problem 73 Fred G4BWP On 20/07/2015 20:27, Joe Glockner wrote: I have never ran into this before - because I never change my original settings ... Here is what happens -- and FYI -- this problem (error) is only noticed on O/s of Windows 7 32 bit -- and Windows 8 64 bit ... I go to the Main Menu/ Tools/ Options/ User Options / Internet TAB And since I have Screen Updates defaulted as DX Info Window - I change it to the Internet Window radio button option ... Then I click OK -- and immediately a pop-up error shows-up as: The parameter is incorrect Then I found that changing ANYTHING in that Internet TAB - causes the same error ... I am running DXbase2007 ver 1.10 on O/S: Windows XP -- ALL ok.. Windows 7/32 bit -- ERROR Windows 7/64 bit -- ALL ok. Windows 8/64 bit -- ERROR I know - this doesn't make any sense Has anyone who is especially running O/S Win8/64bit - run into the same ERROR? 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DXbase 2007 Problem
Mark I had this problem when I first installed Dxbase on a new Win 8 computer in my shack No-one seemed able to help I completely removed the installation, which is more than just removing the installed directory as files get put in other places, and de-install doesn't remove them all. Having cleaned up I reinstalled and it worked OK and has done ever since One of those great mysteries! 73 Fred G4BWP On 12/06/2015 07:18, Mark Hammond wrote: Hello All: T he last three times when I have tried to exit DXbase 2007, the message, Encountered an improper argument appears and DXbase 2007 will not close. I have to do a forced shutdown or a restart to make it close. Has anyone ever have this issue, and is there a solution? Thanks for your help, Mark, K7HPH __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] QSL label problem in Win 8
Hi All I was trying to print some QSL labels today on my new shack computer which is running Windows 8.1 The labels failed to print, or even open Investigating I opened them in the label designer. I got messages about unknown variables The labels are 3 QSO labels It seems in Win 8 the second and third row variables like DATE2, DATE3, TIME2, TIME3 etc. have disappeared somehow? I have tried two Win 8.1 computers Reverting to my Win 7 desktop which just a arrived back from A6 all is well and all the variables are shown in the list Any one have any ideas how to get the labels working under Win 8 please? 73 Fred G4BWP __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Upgrade system
Hi Bob Another option are the MicroHam devices USB driven the simple one provides CAT control of your rig and CW via a Winkey emulation http://www.microham-usa.com/index.html USB CW keyer Good solid equipment made in Slovakia 73 Fred G4BWP On 18/03/2015 23:08, Bob Morrow wrote: I have come out of the dark age of Xp and into the new Windows 7 and found that my RS232 to USB converter doesn't work. Was wondering what everyone is using now days for controlling their rig and sending Cw as far as RS232 to USB devices. Bob Carol Morrow K9MIE http://picasaweb.google.com/rwmorrow1 http://picasaweb.google.com/rwmorrow1 __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Database update...
Hi Steven Surprised no-one answered Joe WA6AXE has written an excellent programme to update the main database. Seek it out! 73 Fred G4BWP On 06/02/2015 02:57, Steven Schmidt via Dxbase wrote: So, I've been off the air for a while through a couple moves, but just got a station up and running again. Still running DXBase 2005 on an old computer with XP in the shack, and notice that there have been several (or more) prefix/country changes. Does anyone have a way to update the database easily, or instructions to (laboriously) update the database manually? I used to be pretty good with it, but I'm out of practice. I think my last manual update was Swain's Island... Thanks for any and all help, Steve K4WA __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] Call mapping anomaly
Hi All Working some DX this morning there is slight anomaly in callsign mapping HC2WAT/8 maps to HC not HC8 Same for HC2ANT/8 DXbase picks up it is HC8 for WPX but then doesn't decide the DXCC is HC8 73 Fred A65BD - G4BWP https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] [dxbase] Call mapping anomaly
Hi Neil Yes but only retrospectively I noticed because the DX cluster spots were showing HC in the Summary window and telling me worked but lucky I noticed the station was actually in HC8 which was needed So in real time the information was wrong 73 Fred -Original Message- From: Neal Campbell Sent: Friday, November 28, 2014 8:14 AM To: dxbase Cc: DXBase List Subject: Re: [Dxbase] [dxbase] Call mapping anomaly Fred Change the DXCC code for the callsign inside the log entry and it will ask if you want to add the result to the callsign map. Say Yes and you have now fixed the problem! 73 *Black Friday sale save up to $250 on your Abroham Neal Computer!* *Visit http://www.abrohamnealsoftware.com/products.php http://www.abrohamnealsoftware.com/products.php* Neal Campbell Abroham Neal LLC On Thu, Nov 27, 2014 at 11:08 PM, Fred Handscombe fre...@homeshack.freeserve.co.uk [dxbase] dxb...@yahoogroups.com wrote: Hi All Working some DX this morning there is slight anomaly in callsign mapping HC2WAT/8 maps to HC not HC8 Same for HC2ANT/8 DXbase picks up it is HC8 for WPX but then doesn't decide the DXCC is HC8 73 Fred A65BD - G4BWP https://sites.google.com/site/fhandscombe/ __._,_.___ -- Posted by: Fred Handscombe fredc...@emirates.net.ae -- Reply via web post https://groups.yahoo.com/neo/groups/dxbase/conversations/messages/2581;_ylc=X3oDMTJxcG9haTZwBF9TAzk3MzU5NzE0BGdycElkAzczNzc3NTE2BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMyNTgxBHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTQxNzE0NzcxMQ--?act=replymessageNum=2581 • Reply to sender fredc...@emirates.net.ae?subject=Re%3A%20Call%20mapping%20anomaly • Reply to group dxb...@yahoogroups.com?subject=Re%3A%20Call%20mapping%20anomaly • Start a New Topic https://groups.yahoo.com/neo/groups/dxbase/conversations/newtopic;_ylc=X3oDMTJmMTZwNTI3BF9TAzk3MzU5NzE0BGdycElkAzczNzc3NTE2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0MTcxNDc3MTE- • Messages in this topic https://groups.yahoo.com/neo/groups/dxbase/conversations/topics/2581;_ylc=X3oDMTM1dTBrM3YxBF9TAzk3MzU5NzE0BGdycElkAzczNzc3NTE2BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMyNTgxBHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTQxNzE0NzcxMQR0cGNJZAMyNTgx (1) Visit Your Group https://groups.yahoo.com/neo/groups/dxbase/info;_ylc=X3oDMTJmY2FtMnA4BF9TAzk3MzU5NzE0BGdycElkAzczNzc3NTE2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0MTcxNDc3MTE- - New Members https://groups.yahoo.com/neo/groups/dxbase/members/all;_ylc=X3oDMTJncTNtbWc2BF9TAzk3MzU5NzE0BGdycElkAzczNzc3NTE2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDE3MTQ3NzEx 1 [image: Yahoo! Groups] https://groups.yahoo.com/neo;_ylc=X3oDMTJlZnJvdjBjBF9TAzk3NDc2NTkwBGdycElkAzczNzc3NTE2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTQxNzE0NzcxMQ-- • Privacy https://info.yahoo.com/privacy/us/yahoo/groups/details.html • Unsubscribe dxbase-unsubscr...@yahoogroups.com?subject=Unsubscribe • Terms of Use https://info.yahoo.com/legal/us/yahoo/utos/terms/ . __,_._,___ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Update to the Refdata (Alias Map table)
Hi Neal Yes absolutely! I know the people involved personally and very well, and all they want is perfection. I have been a user since it was launched and have used it to “clean up” my DXbase logs I have been pretty proactive with my DXbase databases along with Joe’s input to keep them as up to date as possible I have been back entering my old paper logs going back to 1978 at the moment. In fact there is an old bug in DXbase as when you import old logs from ADIF it never checks the start/end date windows in its own files for old calls as the data is imported and maps everything as if it were “today”. Pushing that back to Clublog then gets me a few pages of errors in call mapping. I use that to manually clean up DXbase, but when I look many of the mappings are actually there, but not used during an ADIF import. My method is Type into Fast Log Entry to make an ADIF Import to DXbase Export from DXbase again in ADIF Load to Clublog (and LOTW) Manually enter corrections and exceptions in DXbase Very, very occasionally (like 1 in 3000 QSOs, which is a typical UK paper log book) if find a call which is not mapped in CL but I have written notes in my log about the QSO. Then I email Alan to have a look into it. 73 Fred From: Neal Campbell Sent: Friday, October 31, 2014 3:27 PM To: Fred Handscombe Cc: wa6...@verizon.net ; DXBase List Subject: Re: [Dxbase] Update to the Refdata (Alias Map table) Fred Do you trust the Clublog database more than DXBases? Its a serious question, I can make it so we periodically import the database and use it, but when I did it the first time there were more than a few disagreements with its settings. I enthusiastically support Clublog, they seem to be the only people working on getting it right but just wanted your opinion! 73 BOO! BIG HALLOWEN SALE IN PROGRESS! Neal Campbell Abroham Neal LLC On Fri, Oct 31, 2014 at 1:11 AM, Fred Handscombe fredc...@emirates.net.ae wrote: Hi Joe Thanks for your constant support of DXbase, keeping us all straight! That whole area of M* of callsigns is a mess in the default DXbase data base. It dates back to when Jack was running DXbase and I think he was given some bad advice by someone as many of the UK calls (G*, M*, 2*) were very wrongly mapped. I wrote to him about it way back but nothing happened. I guess living in UK my information didn't count :-) Once you have added MA0 if you look in the body of the Alias mapping tab MA5 maps to GI - WRONG, its GM MA6 maps to GD - WRONG, Its GM MA7 maps to GJ - WRONG, its GM MA8 maps to GU - Wrong, its GM MA1 is missing, should be GM GA also maps to G - WRONG, its GM (a 9 in any UK prefix (G9, M9) for ham radio has never existed) ALL MA (and GA, 2A) prefixes are in SCOTLAND (GM, MM, 2M). Alba is an ancient name for Scotland and this year 2014 is the homecoming year, hence the special call for Scottish residents only The whole mess is repeated in MB* Hopefully the new DXbase will use the Clublog database for callsign mapping 73 Fred G4BWP - A65BD -Original Message- From: Joe Glockner Sent: Friday, October 31, 2014 1:06 AM To: dxbase@mailman.qth.net Subject: [Dxbase] Update to the Refdata (Alias Map table) Recently two DXbase users gave me a heads-up on the callsign MA0XAU .. (Scotland - GM) ClubLog maps this MA0 prefix to Scotland .. and doing a search of the Spots for MA0 - they show Scotland also.. So, since this callsign produces NO Prefix - if you log it right now ... You can setup the MA0 prefix to now log as GM by: Go to Main Menu Tools/ Database Access/ Country prefixes... When the window comes up -- go to the Alias Map TAB and scrolldown to the bottom of that tables -- enter the following: Map Prefix MA0 Pri Prefix GM Next - save this entry by putting your mouse curser into the next (Blank) row. 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Update to the Refdata (Alias Map table)
Joe No problem, you are the one doing all the hard work I had an email form someone else about MB MB is a VERY rarely used prefix and, like GB, could be anywhere in UK (G GI GU GJ GW GM or G) I would say delete all the MB mappings and worry if one is ever active 73 Fred From: Joe Glockner Sent: Friday, October 31, 2014 6:16 PM To: fre...@homeshack.freeserve.co.uk ; wa6...@verizon.net ; dxbase@mailman.qth.net Subject: Re: Re: [Dxbase] Update to the Refdata (Alias Map table) GM fred, I saw that discrepancy and was reading the RSGB webpages to find out what was the real mapping ... Now that we have this info (from you) - I will update my Refdata.mdb file to read as per your guidance. Tnx agn Fred! 73 Joe wa6axe On 10/31/14, Fred Handscombefredc...@emirates.net.ae wrote: Hi Joe Thanks for your constant support of DXbase, keeping us all straight! That whole area of M* of callsigns is a mess in the default DXbase data base. It dates back to when Jack was running DXbase and I think he was given some bad advice by someone as many of the UK calls (G*, M*, 2*) were very wrongly mapped. I wrote to him about it way back but nothing happened. I guess living in UK my information didn't count :-) Once you have added MA0 if you look in the body of the Alias mapping tab MA5 maps to GI - WRONG, its GM MA6 maps to GD - WRONG, Its GM MA7 maps to GJ - WRONG, its GM MA8 maps to GU - Wrong, its GM MA1 is missing, should be GM GA also maps to G - WRONG, its GM (a 9 in any UK prefix (G9, M9) for ham radio has never existed) ALL MA (and GA, 2A) prefixes are in SCOTLAND (GM, MM, 2M). Alba is an ancient name for Scotland and this year 2014 is the homecoming year, hence the special call for Scottish residents only The whole mess is repeated in MB* Hopefully the new DXbase will use the Clublog database for callsign mapping 73 Fred G4BWP - A65BD -Original Message- From: Joe Glockner Sent: Friday, October 31, 2014 1:06 AM To: dxbase@mailman.qth.net Subject: [Dxbase] Update to the Refdata (Alias Map table) Recently two DXbase users gave me a heads-up on the callsign MA0XAU .. (Scotland - GM) ClubLog maps this MA0 prefix to Scotland .. and doing a search of the Spots for MA0 - they show Scotland also.. So, since this callsign produces NO Prefix - if you log it right now ... You can setup the MA0 prefix to now log as GM by: Go to Main Menu Tools/ Database Access/ Country prefixes... When the window comes up -- go to the Alias Map TAB and scrolldown to the bottom of that tables -- enter the following: Map Prefix MA0 Pri Prefix GM Next - save this entry by putting your mouse curser into the next (Blank) row. 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Update to the Refdata (Alias Map table)
Hi Joe Thanks for your constant support of DXbase, keeping us all straight! That whole area of M* of callsigns is a mess in the default DXbase data base. It dates back to when Jack was running DXbase and I think he was given some bad advice by someone as many of the UK calls (G*, M*, 2*) were very wrongly mapped. I wrote to him about it way back but nothing happened. I guess living in UK my information didn't count :-) Once you have added MA0 if you look in the body of the Alias mapping tab MA5 maps to GI - WRONG, its GM MA6 maps to GD - WRONG, Its GM MA7 maps to GJ - WRONG, its GM MA8 maps to GU - Wrong, its GM MA1 is missing, should be GM GA also maps to G - WRONG, its GM (a 9 in any UK prefix (G9, M9) for ham radio has never existed) ALL MA (and GA, 2A) prefixes are in SCOTLAND (GM, MM, 2M). Alba is an ancient name for Scotland and this year 2014 is the homecoming year, hence the special call for Scottish residents only The whole mess is repeated in MB* Hopefully the new DXbase will use the Clublog database for callsign mapping 73 Fred G4BWP - A65BD -Original Message- From: Joe Glockner Sent: Friday, October 31, 2014 1:06 AM To: dxbase@mailman.qth.net Subject: [Dxbase] Update to the Refdata (Alias Map table) Recently two DXbase users gave me a heads-up on the callsign MA0XAU .. (Scotland - GM) ClubLog maps this MA0 prefix to Scotland .. and doing a search of the Spots for MA0 - they show Scotland also.. So, since this callsign produces NO Prefix - if you log it right now ... You can setup the MA0 prefix to now log as GM by: Go to Main Menu Tools/ Database Access/ Country prefixes... When the window comes up -- go to the Alias Map TAB and scrolldown to the bottom of that tables -- enter the following: Map Prefix MA0 Pri Prefix GM Next - save this entry by putting your mouse curser into the next (Blank) row. 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Problem adding sub modes
Hi Knut I have been using Win- 7 and DXbase 2007 v1.10 for about 18 months While I have logged any sub modes as far as I remember it is there If you click in the sub-mode box on the QSO line it opens a drop down to choose what you are using 73 Fred A65BD -Original Message- From: knut.mel...@getmail.no Sent: Wednesday, July 09, 2014 11:46 PM To: Dxbase@mailman.qth.net Subject: [Dxbase] Problem adding submodes Tried to add digital submodes on my Win7-installation. The system does not take any input from me. The input window contains one line: none. Any idea? 73 de LA9RY Knut __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] [DXbase] Problem adding sub modes
Nope. On a BLANK log line the sub-mode drop down can be selected by clicking in the sub-mode column without entering anything else. 73 Fred -Original Message- From: Dave ve3wej Sent: Friday, July 11, 2014 11:29 PM To: dxbase@mailman.qth.net Subject: Re: [Dxbase] Problem adding sub modes you have to select digital first then tab over and view drop down menu, I beleive Dave Garber VE3WEJ / VE3IE On Fri, Jul 11, 2014 at 6:37 AM, Fred Handscombe fredc...@emirates.net.ae wrote: Hi Knut I have been using Win- 7 and DXbase 2007 v1.10 for about 18 months While I have logged any sub modes as far as I remember it is there If you click in the sub-mode box on the QSO line it opens a drop down to choose what you are using 73 Fred A65BD -Original Message- From: knut.mel...@getmail.no Sent: Wednesday, July 09, 2014 11:46 PM To: Dxbase@mailman.qth.net Subject: [Dxbase] Problem adding submodes Tried to add digital submodes on my Win7-installation. The system does not take any input from me. The input window contains one line: none. Any idea? 73 de LA9RY Knut __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dxbase] EF6
Hi all The current special Spanish call EF6 maps to EA6 in DXbase but that is wrong, they are in Madrid, vanilla EA Quickly fixed with a call map entry 73 Fred A65BD - G4BWP https://sites.google.com/site/fhandscombe/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] cw interface and windows 7
Dave Deep in my fuzzy memory I seem to recall a small utility had to be run once, normally at installation, in order to get CW keying to work with DXbase 97? Maybe someone will recall the details? 73 Fred A65BD -Original Message- From: Dave ve3wej Sent: Sunday, June 22, 2014 9:44 PM To: Dxbase@mailman.qth.net Subject: [Dxbase] cw interface and windows 7 is there any way to fool windows 7 and aftermarket com ports to be set in the dxbase cw utility, so that it will recognize com3 ( in my case) I made the keying circuit in a db9 shell, but it will not key in dxbase, and I think it is the com port (3e8) setting, that is not there.. it appears to only support up to xp, so maybe through hamscope or something. has anyone else had success??? Dave Garber VE3WEJ / VE3IE __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Automatic Updates
Hi Dick I have had all my DXbase logs and settings stored in a DropBox for about 2, maybe 3 years www.dropbox.com It is a not a back up per-se but a copy the files are stored off my hard drive, and multiple previous versions are preserved and can be recovered. When switch on another computer then the files are updated onto that one too. As I travel between 3 shacks I can access all my logs (about 30 calls) from any location. I do also make local back-up copies on an external hard drive in all locations just in case! 73 Fred G4BWP A65BD -Original Message- From: Richard Solomon Sent: Friday, May 16, 2014 9:39 PM To: dxbase@mailman.qth.net Subject: [Dxbase] Automatic Updates Now that we have the Cloud and automatic updates (I think), has anyone configured DXBase to automatically backup files to the Cloud and possibly use it to update other computers that use the same files ?? Thanks, Dick, W1KSZ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Import ARRL DXCC credit .adi
Dear Wes You should download the Download report from under Your QSOs and not DXCC QSL Download from Awards 73 Fred G4BWP On 12/05/2014 03:07, Wes Stewart via Dxbase wrote: Hi Neal, Thanks for the very prompt reply. Unfortunately, I think we have a problem with semantics. There is a difference between having credit for a QSO, i.e a match in LoTW and having a QSO awarded to one's DXCC totals. I made the mistake of mixing terms. Yes, I am able to import the LoTW credited (lotwreport.adi) data without issue and have DXBase show LoT in the CFM column. What I would like to do is import the file whose entries look like this: ARRL Logbook of the World DXCC QSL Card Report Generated at 2014-05-12 02:00:48Z for N7WS ADIFVER:53.0.4 PROGRAMID:17LoTW qslcards.php PROGRAMVERSION:6v1.3.1 APP_LoTW_DXCCRecord_Call:4:SN7WS APP_LoTW_DXCCRecord_Entity:3:N291 APP_LoTW_DXCCRecord_Country:24:SUNITED STATES OF AMERICA APP_LoTW_DXCCRecord_Name:11:SWes Stewart APP_LoTW_DXCCRecord_ARRLId:10:N0008036276 APP_LoTW_DXCCRecord_SysId:7:SSDY APP_LoTW_DXCCRecord_LoTWId:4:S3826 APP_LoTW_DXCCRecord_Updated:19:S2014-05-10 09:49:13 APP_LoTW_NUMREC:4:N2044 eoh CALL:2VE QSO_DATE:819810126 APP_LoTW_MODEGROUP:5:SPHONE APP_LoTW_MODE:5:SPHONE DXCC:11 COUNTRY:6CANADA CREDIT_GRANTED:14DXCC,DXCC_MODE APP_LoTW_CREDIT_GRANTED:14:SDXCC-M,DXCC-PH eor And so forth. Regards, Wes N7WS From: Neal Campbell nealk...@gmail.com To: Wes Stewart n...@yahoo.com Cc: dxbase@mailman.qth.net dxbase@mailman.qth.net Sent: Sunday, May 11, 2014 6:42 PM Subject: Re: [Dxbase] Import ARRL DXCC credit .adi Hi Wes Use the Non-DXbase file import utility for this. When you select the file type, specify that its for LoTW ADIF. 73 Neal Campbell Abroham Neal LLC On Sun, May 11, 2014 at 9:40 PM, Wes Stewart via Dxbase dxbase@mailman.qth.net wrote: Maybe this has been answered before, but my search of the archives is coming up nil. I did a DXCC paper submission and a subsequent LoTW submission so that I'm all caught up with having credit for (most) everything that I have confirmed. I can download a report in .adi format that shows my credited QSOs. Is it possible to import these data into DXBase to update the Award field without doing it manually? I suspect not since in some cases there isn't even a full call in the field (pre computer record keeping) and there aren't any OSO times to match either. But I have to ask. Wes N7WS __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] [DXbase] New DXbase 2007 and Windows7
Hi Mike Yes it has been running fine under Win 7 for over a year at my A6 QTH Make sure you follow the installation instructions from Neil's web site GL 73 Fred A65BD -Original Message- From: M Jenkins Sent: Sunday, April 13, 2014 9:41 AM To: dxbase@mailman.qth.net Subject: [Dxbase] New DXbase2007 and Windows7 Hello Does the new DXBase2007 run with no or few issues on Wndows7. I have very recently got a new PC with Winows7. Being a very long term user I had hoped to continue woth it. Any advice appreciated. Regards Mike VK1MJ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] [DXbase] Call/Portable Database
Hi Dick Apart from all the other helpful replies, some of which seem less than factual, I believe your problem is a simple one The character / is not allowed in a file name In all my logs I use an _ instead Try W1AW_7 73 Fred A65BD -Original Message- From: Richard Solomon Sent: Sunday, February 09, 2014 6:16 AM To: dxbase@mailman.qth.net Subject: [Dxbase] Call/Portable Database If I try to create a new database ... W1AW/7 ... the program barfs. How are folks who participate in the ARRL Centennial handling this ? Tnx, Dick, W1KSZ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] WALES
South Wales is on the mainland of Britain so it is EU005 73 Fred G4BWP -Original Message- From: K3SEW Sent: Tuesday, July 23, 2013 11:06 PM To: _DXbase Post Subject: [Dxbase] WALES DOES ANYONE KNOW THE iota NUMBER FOR SOUTH WALES? __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] [DXbase] multiple own calls
Dar Evert DXbase does some (strange) things based on the OPR CALL field You would need a key file which mentions ALL you previous call signs for it to work properly if you have filled out that field by your callsigns. You can check what you have by opening DXbase and doing Help About to see what calls you have registered? 73 Fred A65BD -Original Message- From: Evert Bakker (PA2KW) Sent: Sunday, March 17, 2013 4:24 PM To: dxbase@mailman.qth.net Subject: [Dxbase] multiple own calls Hello all, I just got DXbase running but ran into an issue (which might be solved bij some kind of setting) I have owned 2 different callsigns in the past (and my present one), but all 3 from the same DXCC entity (PA - The Netherlands) I imported my logs and setup up the DX-cluster to warn me if some kind of missing DXCC/Mode/Band comes up. It looks however that it tests the incoming spots against my entries of of my last (and still active) callsign. Is there a setting which tells this comparing mechanism to check the incoming spots with all entries I made under all 3 callsigns I owned? Thanks in advnace. 73's, Evert PA2KW __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] NA Contest Log Conversion
Hello Ron Try logconv by KA5WSS 73 Fred A65BD - Original Message - From: K3SEW k3...@comcast.net To: _DXbase Post Dxbase@mailman.qth.net Sent: Tuesday, January 08, 2013 5:46 AM Subject: [Dxbase] NA Contest Log Conversion Can anyone convert my NA CONTEST LOG to something that can be imported to DXbase2007? Like an .adi Ron K3SEW __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] log problem resolved
Hi Al If you uploaded all your QSOs before the problem to Clublog you can get them all back again! Just log on to Clublog, go to settings, callsigns and on the right against each call there is a button Download which will give you back your own log If you use the non DXBase import utility to import that adif file DXbase will reject all the contacts it already has and add in the ones you thought you had lost!! Its a handy back up of last resort! 73 Fred A65BD - Original Message - From: Al VE1AL ve...@eastlink.ca To: dxb...@yahoogroups.com; 'DXBASE .com' dxbase@mailman.qth.net Sent: Sunday, August 12, 2012 4:22 AM Subject: [Dxbase] log problem resolved To those of you who offered suggestions on how I could fix the problem I was having with my DXbase database, thanks! I had time earlier today to create a new database using the corrupted file I had. Although I may be missing as many as 1k QSOs, none of them appear to have been important enough to affect my totals. All the QSOs in the lost database had been uploaded to both LoTW and Club Log anyway and if I get an LoTW match that isn't in my log I will simply add it. :-) 73 Al, VE1AL __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Rookie needs some help
Gary, Cecil That sounds a lot of work! I am assuming you know the date you changed your callsign and didn't make QSOs on the same date with both calls? 1 - Back up your log (that I agree with!) 2 Export the date range for your first call to an ADIF file (Use the selection wizard, you may need to practice as it seems to work counter-intuitively! Does mean BEFORE or AFTER the given date?) 3 Sign that ADIF file with your LOTW key for your old call and upload to LOTW 4 Export the date range for your new call to another ADIF file 5 Sign that ADIF file with your LOTW key for your new call and upload to LOTW Optionally you could then use those 2 ADIF files to create TWO DXbase logs, one for each call, using the Non DXB import routine 73 Fred A65BD - G4BWP - Original Message - From: Gary AL9A a...@mtaonline.net To: Dxbase@mailman.qth.net Sent: Sunday, May 20, 2012 11:48 AM Subject: Re: [Dxbase] Rookie needs some help Cecil, I don't know if you need to break your data base up into two records or not. First try working with the single data base and do some editing work to straighten things out. 1. Make a back up of your current mdb file so in case something goes awry you can start over again. 2. Now you need to reset the QSLS field back to its original setting for all records in the log. The QSLS field should now have all records set to either LOTW or Both, meaning you've sent both a paper card and set the LOTW flag. You need to change all the LOTW settings back to where they were. Go to the first record in the log and click on the QSLS field of that record. Now click on Edit/Replace. In the Replace window type Both in the Find what: box and Card in the Replace with: box. Now click on the Replace All button. DXB will now work its way down through the log to the last record and change each instance of Both to Card, which removes the LOTW part. When that is done click on Cancel to close the window. Again, from the first record in the log, click on Edit/Replace and enter LOTW in the Find what: box and No in the Replace with: box. Click on the Replace All button. DXB will again go down through the log and change all the records that were flagged as being sent to LOTW and change them back to No, meaning nothing has been sent. This has now cleared all the LOTW flags from the QSLS field. 3. In the Opr Call field did you use both your old call, WB5VCE, and your new call, K5DL, when entering the records? If not and all the records have an Op Call of K5DL you need to segregate which records belong to the old call and which to the new call. To do this you will need to know the date you started using your new call. All records prior to this date should have the old call in the Opr Call field. If you already have both calls in the log skip to Step 5. If you only have K5DL go to Step 4. 4. Go to the first record in the log and click on the Opr Call field. Now click on Edit/Replace and the Replace window should say K5DL in the Find what: box. If not, enter K5DL here. In the Replace with: box type WB5VCE and click on Replace All. This will cause DXB to change all entries in the Opr Call filed of the log to WB5VCE. Now go down in the log to the date you started using the new K5DL call. On this record click in the Opr Call field and Edit/Replace. Fill in the boxes so that you replace WB5VCE with K5DL and click Replace All again. This sets all the records from here down back to the correct call sign in use at that time. Make note of how many records have the old call and how many records are with the new call. Check the Record counter box at the bottom of the log. 5. With both old and new calls in the log you can now attempt to create two different adif files for submission to LOTW. Go to Tools/Selection Wizard and set Output Type to ADIF File and click on the Test only... box. Now click on the QSO Filters button. Clear all the boxes in the record filters section and then click on the boxes for No LOTW Submitted and QSO Call =. In the QSO Call = box enter WB5VCE. This will now select all records for WB5VCE that have not been sent to LOTW. Click on OK and then Start on the Selection Wizard. When asked create a adif file name and be sure to click on NO when it asks to update your records. When the Wizard completes its Test only run exam the number of records it identified and compare it with the record count from your log. Does it seem correct? If so clear the Test only box and run it again. This time choose Yes to the question about setting the LOTW flag. Now do the same procedure again, but this time create an adif file for the records where QSO Call = K5DL. Again do a test run first and if it looks accurate create the adif file and say Yes to changing the records in the log to LOTW. You now have two separate adif files to upload to LOTW. One for your old call the other
Re: [Dxbase] ITU Zones
Larry He is half right! According to the REAL ITU map, which is for broadcasting purposes, there are large blank areas most of which have no land in them. ITU stops at 75 zones. The version of the ITU zones map adopted by amateur radio also numbers the so called sea zones and so there are 90 ITU Zones for amateur radio purposes. Two of the ITU sea zones do in fact have land in them (CE0Y and one of the JDs), both small islands that were probably not considered for broadcasting. A definition of all 90 zones was adopted by all IARU Regions some years back. I don't think I have a copy of the 90 zone map here in my A6 QTH, if I find it I will scan it and post it somewhere. There might be a copy on the ARRL web pages as ITU zones are used in the July IARU contest which ARRL administers and the zone map *may* be included with the rules? 73 Fred G4BWP - A65BD - Original Message - From: Larry E Price price...@frontiernet.net To: 'Robert C. Crawford' k8...@arrl.net; 'DXbase' dxbase@mailman.qth.net Sent: Wednesday, May 16, 2012 4:30 PM Subject: Re: [Dxbase] ITU Zones Bob - I think you are in error. The ITU zones cover all the planet so your query is not relevant. 73 Larry W4RA -Original Message- From: Robert C. Crawford [mailto:k8...@arrl.net] Sent: Wednesday, May 16, 2012 7:42 AM To: DXbase Subject: [Dxbase] ITU Zones I am working toward the CQ DX Field Award. I worked a station in Field HO. Most of HO field in not in an ITU zone. There are also a lot of other areas on the planet that are not in an ITU zone. DXbase will not allow a null value in the ITU zone column. Can NONE be added to the zone list or a null value allowed? Thanks 73 de, Bob K8VFV since 1960 Member of: 10-X, CCA SEMDXA (Pres.) Life member: AMSAT, ARRL QCWA 9 Band DXCC, 6 Band WAS, 50 MHz VUCC (412) DXCC Honor Roll #1 Phone and 5BWAZ #179 Web Site - http://www.k8vfv.com Email - K8VFV at ARRL dot NET Outgoing email checked by MSE Listening 145.700 MHz In GOD we trust. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 120516-0, 05/16/2012 Tested on: 5/16/2012 8:30:01 AM avast! - copyright (c) 1988-2012 AVAST Software. http://www.avast.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] VP8NO
Hi Bob That must be something you have done to your copy of the database as mine correctly maps him to Falklands VP8NO was QRV from Antarctica in 1974 to 1976 (see https://secure.clublog.org/test.php) 73 Fred G4BWP Message Received: Apr 24 2012, 02:39 PM From: Robert C. Crawford To: DXbase Cc: Subject: [Dxbase] VP8NO I worked VP8NO yesterday. DXbase has the Call Map set as KC4 it is really VP8. Check your Call Map in case you need VP8. Bob K8VFV since 1960 Member of: 10-X, CCA SEMDXA (Pres.) Life member: AMSAT, ARRL QCWA 9 Band DXCC, 6 Band WAS, 50 MHz VUCC (411) DXCC Honor Roll #1 Phone and 5BWAZ #179 Web Site - http://www.k8vfv.com Email - K8VFV at ARRL dot NET Outgoing email checked by MSE Listening 145.700 MHz In GOD we trust. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Latest Version
Larry I bet you can solder too? So you made all your own gear? And the antennas and towers? Where do you stop? Have nice day 73 Fred A65BD - Original Message - From: Larry E Price price...@frontiernet.net To: 'Gary - KR8V' k...@comcast.net; Dxbase@mailman.qth.net Sent: Monday, March 19, 2012 7:01 AM Subject: Re: [Dxbase] Latest Version Gary -= I too am running v 1.05, at one time I was running v. 1.09 but for a variety of reasons not pertinent here, I decided to 'drop back' to the tried and proven 1.05. Since I am perfectly capable of finding the station I want to work listening to my receiver (not the Spots), turning my beam to the heading (and figuring out whether it is SP or LP), I am capable to determining what country the station is located in, I can even determine whether I need the band country for DXCC. I figured all I want my logging program to do is to LOG. Therefore, the newer versions of Dxbase don't fill a need for me. Actually, the long awaited and long overdue v. 10 better have some real bells/whistles as I don't see a present need for it in my own shack. But then that's just me. I learned a long time ago when I was an undergrad in EE lab how to tune an amp so I don't see any need for an Alpha with microprocessor controlled tuning either. 73 Larry W4RA -Original Message- From: Gary - KR8V [mailto:k...@comcast.net] Sent: Sunday, March 18, 2012 10:08 PM To: Dxbase@mailman.qth.net Subject: Re: [Dxbase] Latest Version Hi All: Am running DXB2007 here, v1.05. Am I missing anything by not upgrading to v1.09? If I do upgrade, any issues with the install? Gary / KR8V __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 120318-1, 03/18/2012 Tested on: 3/18/2012 11:01:54 PM avast! - copyright (c) 1988-2012 AVAST Software. http://www.avast.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] : Something stupid that I have done in the past
Jack That is a very broad and condemning statement with nothing to back it up! Not even first hand experience from your comment? I load my logs to Clublog and find that DXBase makes plenty of errors in deciding which country I have worked. I use the Clublog feedback to improve my DXBase databases. To be factual, and not just make a wild claim, most of the errors are in the Asiatic Russian prefixes. If I feel my DXBase is right I give feedback, in the correct forum, and the accuracy of Clublog improves, or I find out I have made an error! Making wild statements in the wrong forum helps no-one. Clublog's database is being updated almost daily, so something which happened even a few months back is probably now corrected an it is well worth deleting an old log and running it again. 73 Fred G4BWP Message Received: Mar 15 2012, 03:14 PM From: Jack To: 'Bill Parry' , 'D. Drake' , dxbase@mailman.qth.net Cc: Subject: Re: [Dxbase] : Something stupid that I have done in the past Just throwing out a caution that others have used clublog and discovered that it's database has quite a few errors in it. So, if you are using it as the gospel, you're probably creating errors rather than fixing anything. Just saying -Original Message- From: dxbase-boun...@mailman.qth.net [mailto:dxbase-boun...@mailman.qth.net] On Behalf Of Bill Parry Sent: Thursday, March 15, 2012 10:06 AM To: 'D. Drake'; dxbase@mailman.qth.net Subject: Re: [Dxbase] : Something stupid that I have done in the past I did exactly that some time ago. I uploaded my log sometime back and Clublog noticed the errors (among others). I used the error file to make the corrections. My point was not to try to figure out if I had mistakes or a way to correct them but to mention that it is real easy to make mistakes like this! (Usually if a mistake is to be made I am one of the first to try it out! :-) Bill W5VX -Original Message- From: dxbase-boun...@mailman.qth.net [mailto:dxbase-boun...@mailman.qth.net] On Behalf Of D. Drake Sent: Thursday, March 15, 2012 7:38 AM To: dxbase@mailman.qth.net; bpa...@rgv.rr.com Subject: Re: [Dxbase] : Something stupid that I have done in the past Bill, Try running you log through Clublog. I think the error report will tell you which qso's (by call sign) have the wrong prefix. 73, Dale AA1QD From: Bill Parry Subject: [Dxbase] Something stupid that I have done in the past To: Message-ID: 001201ccffce$8ecfa320$ac6ee960$@rr.com Content-Type: text/plain; charset=us-ascii This is just an FYI regarding a mistake that I was making and it was messing up the prefix column in my records. Sometimes I would hear a station and enter it into DXBase. I do this to get the record of whether I have worked the station before and on which bands. If I accidentally entered the call wrong or copied the call wrong I would correct the call in the callsign column.. If you hit enter again on that line it will correct the country that is entered. This unfortunately does NOT fix the prefix column and leaves the original prefix entered. I suppose this is no big deal but it does screw up the prefix totals for the Prefix award. I am probably the only person that has done this but just in case there is another dummy out there you might want to be careful. Bill W5VX __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] CW keying with serial port.
Hello Bob Have you activated the CW interface? Tools Options CW Options Choose the one you want? The default is none, so by default it wont work! You may want to consider a Winkey by K1EL which improves the CW quality on Windows computers 73 Fred A65BD - Original Message - From: rharris...@aol.com To: dxbase@mailman.qth.net Sent: Saturday, December 10, 2011 8:40 PM Subject: [Dxbase] CW keying with serial port. I recently installed a 2 port PCI serial card in my Vista 64 bit computer for use with rig control and cw keying. The rig control works great but no luck with the cw keying. I have configured the port to com1 as well as dxbase to use com1. Not sure what the problem might be. Any help would be appreciated. Bob WB2UBW __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Omni VII
Paul You must have an old version, the O7 in there in mine (1.09) and does work Hope you will be more impressed by the O7 than I am, the K3 was a better buy for me! My O7 is for sale in UK 73 Fred G4BWP - Original Message - From: Paul paul.d...@gmail.com To: dxbase@mailman.qth.net; dxb...@yahoogroups.com Sent: Tuesday, October 04, 2011 8:00 PM Subject: [Dxbase] Omni VII I am trying to get my new Omni VII working with dxbase and having trouble. Dxbase doesnt have the radio in its pulldown. Anyone know what will work? thanks. Paul - n1pd __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Fw: ADD CALL TODXBASE PLEASE!
This definitely does work, I have used many different .mdb files However You MUST have a DXbase registered callsign as the operator If you do not do this the logging will appear to work but you will not be able to print QSL labels and those calls will not appear in any ADIF export for LOTW for example. Maybe some other features as well 73 Fred G4BWP Message Received: Jul 28 2011, 11:42 AM From: Mike Kasrich To: dxbase@mailman.qth.net Cc: Subject: Re: [Dxbase] Fw: ADD CALL TODXBASE PLEASE! That works. You can have as many .mdb files as you want I have a separate one for each of the trips Ive made. Just a question of switching databases depending on what you are looking up. Mike/aj9c On 7/28/2011 5:45 AM, Phil Snyder wrote: Alex, I believe that if you take each call sign and add it to your other calls you can make a separate mdb file. Ex. W2OX/V47KP. I did that with DXBase 2005 until my upgrade to 2007. Not sure if it will work in 2007. Phil N9LAH On 7/27/2011 9:53 PM, alex wrote: - Original Message - From: alex To: n...@comcast.net Cc: w...@verizon.net Sent: Wednesday, July 27, 2011 8:07 PM Subject: ADD CALL TODXBASE PLEASE! NEALi NEED TO ADD MY OLD CALL TO DXBASE2007CURRENT CALLS ARE: W2OX,W2OX/4,V47KP,V47M, V44KBP,V47Z,V47NM, V47NT, V47E I HAVE SENT SEVERAL EMAILS TO REQUEST THIS CHANGE WITH NO REPLY THANKS ALEX W2OX __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1390 / Virus Database: 1518/3792 - Release Date: 07/27/11 __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] *NEW* Refdata/Logbook MDB Analyzer Updater Ver 4.31 -Joe WA6AXE
Gary If you want some really useful feedback on your log, and especially the Russian prefixes, I suggest you join Clublog (www.clublog.org) once you load up your logs you will get useful feedback on prefix mapping. I have been using this to fine tune my DXbase mapping file Club log probably has the most accurate prefix mapping database 73 Fred A65BD - Original Message - From: Joe WA6AXE wa6...@hotmail.com To: a...@mtaonline.net; dxb...@yahoogroups.com; dxbase@mailman.qth.net Sent: Monday, June 20, 2011 1:35 AM Subject: Re: [Dxbase] *NEW* Refdata/Logbook MDB Analyzer Updater Ver 4.31 -Joe WA6AXE Gary, Only you can make the decision about WHEN to upgrade .. If you wait until ver 1.09 -- just be aware that the current RU callsign/prefixes mod is strictly for the Refdata -- I do NOT check any of the QSOs .. MOST of the time -- the RU QSOs that you would log would be ok -- just look over the PREFIX column of your logbook for any glaring prefix that looks wrong ... If you go for ver 1.08 -- then YES -- run the Updater of mine ... 73 Joe wa6axe From: a...@mtaonline.net To: wa6...@hotmail.com; dxb...@yahoogroups.com; dxbase@mailman.qth.net Subject: Re: [Dxbase] *NEW* Refdata/Logbook MDB Analyzer Updater Ver 4.31 -Joe WA6AXE Date: Sun, 19 Jun 2011 13:22:51 -0800 Joe, Well, I think I just got motivated to upgrade to DXB2007! I started looking at the Russian prefix changes in earnest and quickly came to the conclusion that I would probably make a horrific mess of my refdata.mdb file by attempting manual changes myself. So I guess now I'm trying to decide whether to upgrade to 2007 V1.08 and use your Checker/Updater program or wait for V1.09 to be released with the new refdata.mdb file. I am leaning toward the later, but would like to check something first. I have been working the All Asia CW DX contest this weekend and have quite a few RU contacts with the new prefixes. If I import them into my current DXB2006 mdb and later upgrade to DXB2007 V1.09 will the data in my 2006 mdb file be updated to reflect the new prefix allocations or should I still download and run your Refdata/Logbook MDB Analyzer Updater Ver 4.31? I suspect the latter would be the case, but just wanted to check before I step off the edge. 73, Gary AL9A - Original Message - From: Joe WA6AXE wa6...@hotmail.com To: dxb...@yahoogroups.com; dxbase@mailman.qth.net Sent: June 12, 2011 9:14 PM Subject: [Dxbase] *NEW* Refdata/Logbook MDB Analyzer Updater Ver 4.31 -Joe WA6AXE GM All: For the DXbase2007 users -- I have just posted Version 4.31 of my Refdata/Logbook MDB Analyzer Updater program to my Ham Radio website at: http://www.navycthistory.com/wa6axe/selection.html This is the same program as before - except that I have now included a CHECK/SAMPLING for the new Russian Prefixes/Callsigns, that we learned about very recently. There is an ADDITIONAL Colored Box in both the Alias Map area and Call Map area of my program .. PSE be sure and read the instructions on the webpage that is LINKED to via my Selection webpage ... things changed just a bit ... FYI - I have given Neal the updated Refdata.mdb file - so that he will be including it into Version 1.09 of DXbase2007.. So, The DXbase user can -- (1) Wait until Version 1.09 is available from Neal (2) Download and run my Checker/Updater program (DXbase2007 only). NOTE!! -- your BACKUPS of your Refdata and logbook mdb files will be in your C:\JoesBackup directory -- so that if you do not like what you see -- just revert to your Backups ... (3) Make manual updates to your own Refdata mdb file - using the info that has already been published on the DXbase Reflector .. You make the updates and choices of what needs to be updated. It is QUITE EXTENSIVE!! If you run into any problems while running the checker/updater of mine - just send me a direct email ... The LINK for the webpage is the following words on selection.html webpage: Refdata/Logbook MDB Analyzer Updater Ver 4.31 Refdata/Logbook MDB Analyzer Updater program 73 Joe wa6axe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home:
Re: [Dxbase] FW: Re: M/callsign - What's With This?
Jim In which case the logging programmes are WRONG! /M has NEVER ever been a legal suffix to indicate a station is in England M/ is legally required PREFIX (and only prefix) for vistors to England operating under CEPT England, and other countries of the UK , have never had call areas so a numeral, however desirable for the logging programmes shortcomings is not required, is not legal to use either! This really is a fuss about nothing 1 - the OPERATOR should be in charge of his staion not the computer 2 - there were 2 stations using M/ calls I saw spotted over the weekend. It takes less than 30 seconds using DXBase to add these as full callsign maps. One of those is really operating illegally as the use of M/ is intended to be a short term visitor (maybe CEPT says 1 month?) and he has lived in England for a number of years. Maybe he really does go home each month a reset the clock? 73 Fred G4BWP The M/ or /M for the most part most logging programs consider this to be England G. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DXBase new release and Dayton Sale
Guys I hope you made a backup before running this Update? It would have been nice to have been told it would WIPE OUT ALL YOUR LOGS!! Or was it just me Luckily I am paranoid 73 Fred G4BWP -A65BD - Original Message - From: Neal Campbell abrohamn...@gmail.com To: dxb...@yahoogroups.com; DXBase List dxbase@mailman.qth.net Sent: Tuesday, May 17, 2011 4:23 AM Subject: [Dxbase] DXBase new release and Dayton Sale Hi all I have posted the new 1.08 release of DXBase in a new installer ( http://www.abrohamnealsoftware.com/DXB2007.zip). This release contains a fix to ADIF export so its compatible with current ADIF Standards 2.27 release as well as support for expanded import of data from external programs. Unless there is an urgent case made, this will be the last release of the 2007 version of DXBase. To celebrate this week's Dayton Hamvention, I have dropped the price of DXBase by $10. This means a new license costs $49.99. an upgrade from DXB2006 is $15.99 and an upgrade from an earlier version is $39.99. These prices will be in effect thru the end of next week! 73 Neal -- Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 10% off of all computer systems and $10 off DXBase in celebration of Dayton Hamvention !!! Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] cluster setup
Al I think that is an old DXbase foible across many databases Once you make your changes try clicking into another line before closing Or make a new entry with the revised data, and again click another line to make it stick From distant memory!! 73 Fred G4BWP - A65BD - Original Message - From: Alan Leith ale...@syd.eastlink.ca To: dxbase@mailman.qth.net Sent: Saturday, May 07, 2011 7:09 PM Subject: [Dxbase] cluster setup The one response I got to my question about changing the address of a DX cluster has half solved my problem. So I'll ask again. I have changed the address of my local cluster in the Hosts file in Windows XP. However, when I attempt to do the same change in the DXbase program using the Modify Hosts File function, following the instructions in DXbase 2006, I get no change. Obviously I am doing something wrong but I'll be damned if I can figure out what it is. Each time I edit the line for ve1dxi.no-ip.org to ve1dxi.no-ip.com and save it following the instructions, it goes back to .org and I am unable to connect to the cluster. Can anyone tell me how to get this edit to take properly? 73 Al, VE1AL __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] cluster setup
Hello Alan I have DXBase 2007 and Windows XP I looked at my Hosts file and, like another poster, did not find VE1DXI So I added ve1dxi.no-ip.com to my hosts file. Once I finished I clicked on the empty line below then closed the Host window. I was able to connect to VE1DXI by reselecting it in the appropriate menu. Note that even though it was added at the end of the list in the Host box it had then been sorted into the list in alphabetical order. I then closed the connection, closed DXBase and reopened it. VE1DXI was still selected and connected up again I have not rebooted totally yet! 73 Fred G4BWP - A65BD - Original Message - From: Alan Leith ale...@syd.eastlink.ca To: dxbase@mailman.qth.net Sent: Saturday, May 07, 2011 7:09 PM Subject: [Dxbase] cluster setup The one response I got to my question about changing the address of a DX cluster has half solved my problem. So I'll ask again. I have changed the address of my local cluster in the Hosts file in Windows XP. However, when I attempt to do the same change in the DXbase program using the Modify Hosts File function, following the instructions in DXbase 2006, I get no change. Obviously I am doing something wrong but I'll be damned if I can figure out what it is. Each time I edit the line for ve1dxi.no-ip.org to ve1dxi.no-ip.com and save it following the instructions, it goes back to .org and I am unable to connect to the cluster. Can anyone tell me how to get this edit to take properly? 73 Al, VE1AL __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Usage question for packet sysops?
Of course if W3LPL stopped his highly unpopular (outside US at least) SPAMMING with automated skimmer spots then the traffic would be a lot less! Frank really is making himself unpopular and will be one to avoid calling in contests for me 73 Fred A65BD - Original Message - From: Neal Campbell n...@abrohamnealsoftware.com To: Jack lenn...@bellsouth.net Cc: dxbase@mailman.qth.net Sent: Thursday, March 24, 2011 5:04 PM Subject: Re: [Dxbase] Usage question for packet sysops? Hi Jack, Based on 44000 spots generated during the ARRL SSB Contest, here are some assuptions: 1, Weekend spot trattic of 44K (which is way high, for instance CQWW RTTY contest had 30K) 2. Spots are a maximum of 80 characters so I took an average of 40 characters 3. The total of week spots is the weekend spot load plus half of the weekend spots (again quite conservative) Given these assimptions, there are a total of 66000 spots at a total character count of 2.6MB. With 4.3 weeks a month thats a monthly load of 11.26MB, Yearly load is 135.2 MB Not such a factor for internet usage I hope? 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Thu, Mar 24, 2011 at 8:20 AM, Jack lenn...@bellsouth.net wrote: I'm curious if any sysops track the amount of data that is sent to an individual subscriber to their internet cluster. If we assumed a full time connection during the most busy month, probably in months of large contests, how much data would typically be sent to a suscriber? My ISP announced that they are going to impose data usage limits and I'm just wondering what internet cluster usage might contribute to my overall data usage. Thanks Jack __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Suggestion for new utility/report
Hi Joe If you do Help, About DXBase 2007 then list of registered calls are displayed. They could be copied into a utility manually? I guess many people only have one call, although with the licensing process in the US and vanity calls maybe that is not so! Thanks for looking, I'll just have to scroll all 50+k QSOs! or learn about MS Access 73 Fred - Original Message - From: Joe WA6AXE wa6...@hotmail.com To: dxbase@mailman.qth.net Sent: Saturday, February 19, 2011 6:13 PM Subject: Re: [Dxbase] Suggestion for new utility/report Fred and all: Fred's email came to me directly - and, I did not notice that he had the DXbase Reflector on the email also - until Mike sent his email too. ALL -- The registered callsigns is encrypted and I can not get to that info automatedly. This is purposed done by the author. The only way that I could possibly make some kind of utility - would be to have the USER by hand type-in the authorized/registered callsigns .. but, this brings in some problems also -- some users do not know where to look for the Registered Callsigns that were in their REG file .. Sorry - but, this one is not do-able as a fully automated utility. 73 Joe wa6axe From: fredc...@emirates.net.ae To: wa6...@hotmail.com; dxbase@mailman.qth.net Subject: Suggestion for new utility/report Date: Sat, 19 Feb 2011 12:36:05 +0400 Hi Joe I want to add my thanks fo the support you give the DXbase users! I have a suggestion for a new report or utility. DXBase uses the Opr Call column to validate the use of the programme. I have had many discussions with Jack over the years as to why this is wrong under the licencing conditions in some countries and hopefully something new will be used under the new ownership/SW release. The way the OPR call column is used introduces errors into the logs and the way they interact with the likes of Club Log and LOTW. In fact it was using Club log I have spotted my problem (check it out and join at for free www.clublog.org ) First the Opr Cal is NOT validated against the valid registered callsigns which it should be. You can enter anything in the column and you are NOT warned, which seems a little unwise when the column is used later to validate the data. Second if the Opr call entry is NOT one of the registered callsigns then if you do an ADIF export to LOTW, for example, then that line of data is NOT included in the export file. Third if you do an LOTW export and certain lines are excluded, these line ARE marked as sent to LOTW even though THEY HAVE NOT BEEN sent!! How crazy is that? Maybe you see my disagreemnet with this method of validating the user. So Joe my request is a report or utility that checks each log line for a valid registered call against the registration file, and flags up any wrong entries in Opr Call column. If there was a way to open each entry for editing, to undo the errors introduced as above, or do it automatically, that would be even better 73 Fred G4BWP - A65BD __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Suggestion for new utility/report
Neal Your first paragraph is stating what I have argued several times until I just gave up with Jack! That is how the UK licensing works. If a friend uses my call I am legally obliged to note his call in my log. In the old days he had to sign his name too on the paper log. Just exactly how *I* interpret the purpose of the OPR call column BUT! If you do that (enter the real OPR Call on each QSO) then you will not be able to - print QSLs - Export to ADIF (probably something else!) (You can only log on to the packet cluster with a registered callsign also) for ANY of the QSOs made by your friend Your second paragraph is incorrect, OPR Call most definitely IS used to validate the use of DXBase 2007 by the registered callsign(s) QSL cards/label printing and ADIF exporting REALLY IS validated by the Opr call I have directly experienced it many times with QSL labels This morning I solved my missing 1044 QSOs in Club log mystery I was missing 1044 QSOs in 2003 in Club log, the totals per year on DXB and CL were close all years except 2003 Scrolling the log I saw we used my callsign with 2 other operators in our Field day activity in 2003 I changed those Opr call entries to G4BWP (making my log illegal!) and out of nowhere I get 1044 QSOs exported to ADIF and when upload to Club log the 2003 year totals matched The one and only thing I did was change the OPR call from what it was before to G4BWP It was slightly different in the old DOS versions. You HAD to have the registered call included on the text to be printed on the QSL labels. If you did not they would not print! I don't think it is a bug as its too reliable and so directly related to the list of registered callsigns 73 Fred - Original Message - From: Neal Campbell To: Fred Handscombe Cc: Fred Handscombe ; Joe WA6AXE ; dxbase@mailman.qth.net Sent: Saturday, February 19, 2011 7:56 PM Subject: Re: [Dxbase] Suggestion for new utility/report Hi Fred I think that the concept of the OPR Call field is that it should allow anyone visiting the shack to operate and for the registered owner to know who it was, not enforcing the call against the registration. So the concept that it should be a registered call is not how I understand the use of it. The other two points, however, do not appear to live up to the purpose of the field (it should not be part of ADIF export validation). The DXBase re-write will only use a registration key for installation and not for operational verification BTW. I will see if there is an easy way to fix the opr call validation 'bug' in the current version! 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Feb 19, 2011 at 3:36 AM, Fred Handscombe fredc...@emirates.net.ae wrote: Hi Joe I want to add my thanks fo the support you give the DXbase users! I have a suggestion for a new report or utility. DXBase uses the Opr Call column to validate the use of the programme. I have had many discussions with Jack over the years as to why this is wrong under the licencing conditions in some countries and hopefully something new will be used under the new ownership/SW release. The way the OPR call column is used introduces errors into the logs and the way they interact with the likes of Club Log and LOTW. In fact it was using Club log I have spotted my problem (check it out and join at for free www.clublog.org ) First the Opr Cal is NOT validated against the valid registered callsigns which it should be. You can enter anything in the column and you are NOT warned, which seems a little unwise when the column is used later to validate the data. Second if the Opr call entry is NOT one of the registered callsigns then if you do an ADIF export to LOTW, for example, then that line of data is NOT included in the export file. Third if you do an LOTW export and certain lines are excluded, these line ARE marked as sent to LOTW even though THEY HAVE NOT BEEN sent!! How crazy is that? Maybe you see my disagreemnet with this method of validating the user. So Joe my request is a report or utility that checks each log line for a valid registered call against the registration file, and flags up any wrong entries in Opr Call column. If there was a way to open each entry for editing, to undo the errors introduced as above, or do it automatically, that would be even better 73 Fred G4BWP - A65BD __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post
Re: [Dxbase] Report Bug
I am seeing the same result 73 Fred G4BWP - A65BD - Original Message - From: Brendan Minish ei6iz.bren...@gmail.com To: dxbase@mailman.qth.net Sent: Monday, February 07, 2011 7:53 AM Subject: [Dxbase] Report Bug There is a DXCC related report in the standard reports that is called dxccnewperyr.rpy this report is suppsoed to show how many new DXCC's were worked in each year, I know I have a lot of new ones over the last few years This report has a bug in it as it seems not to list years more recent than 2007 It also goes back to 1955, surely it should only go back to the oldest QSO in the log instead of showing (in my case) lots of zeros prior to 2000 on the other hand the report dxccyear.rpt only lists years that the log covers I worked 196 DXCC's in 2010, my best year was 2007 and I have 95 already this year. Not too bad for supposedly no sunspots ;-) On a different note, I seem to rarely use the repors system but every time I do I find a new report to play with, some of them are pretty slick. Do any of you have any favourites -- 73 Brendan EI6IZ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] RADIO K3???
If you prefer using CW REV (tuning up the band) by default as I do there is another file given to me by an EI guy. If you need it I will search and forward to you Both this and his work perfectly as far as I can say 73 Fred A65BD - Original Message - From: Wes N7WS n...@k6mhe.com To: Bill [NS4C] n...@windstream.net; 'DXBase Reflector' dxbase@mailman.qth.net; w...@verizon.net Sent: Monday, December 06, 2010 7:35 AM Subject: Re: [Dxbase] RADIO K3??? You can add the following K3 parameters to the radios.ini file and it will appear in the options. * [ELECRAFT_K3] P_LSB=1 P_USB=2 P_CW_USB=0 P_CW_LSB=0 P_AM=5 P_FM=4 P_FM_N=0 P_DATA_LSB=0 P_DATA_USB=0 P_DATA_FM=0 P_CW=3 P_FSK=6 P_RTTY=6 P_PACKET=9 P_CWR=3 LSB=1 USB=2 CW=3 FM=4 AM=5 FSK=6 RTTY=6 CWR=7 HIGH=3 MEDIUM=2 LOW=1 OFF=0 ON=1 FREQDIVIN=1 FREQDIVOUT=1 USEEXTENDEDMODES=0 FREQSHIFT=0 PACING=20 DefaultCW=3 DefaultAM=5 DefaultFSK=6 DefaultRTTY=6 DefaultFM=4 DefaultCWR=3 SelectVFOA= eoc(0) GetVFOA= asc(FA;) rrs(14) eoc(0) PrsVFOA= asc(FA) dec(%vfoa,11) asc(;) eoc(0) SelectVFOB= eoc(0) SetVFOB= asc( FB ) dec( %vfob,11 ) asc( ; ) eoc(0) GetVFOB= asc(FB;) rrs(14) eoc(0) PrsVFOB= asc(FB) dec(%vfob,11) asc(;) eoc(0) SetMode= eoc(0) GetMode= asc( IF; ) rrs(38) eoc(0) PrsMode= asc(IF) dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(;) eoc(0) SetFilter= eoc(0) GetFilter= asc(K31;) asc( FW; ) eoc(0) PrsFilter= asc(FW) dec(%dummy,4) dec( %filter, 1 ) asc ( ; ) eoc(0) SetSplit= asc( FT ) dec( %split ) asc ( ; ) eoc(0) GetSplit= asc( IF; ) rrs(38) eoc(0) PrsSplit= asc(IF) dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(;) eoc(0) * Wes N7WS __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DXBase 2007
Dave I guess you stopped for coffee in the middle if it took you that long?? :-) Seriously I cannot see what the fuss is all about. I too updated my DXBase in about 20 minutes (including coffee), and have always been happily adding the new countries that came along, plus various prefix changes and IOTA updates and new QSL managers ..the list goes on. DXBase is that versatile. Maybe it does look hard on the surface but it is not when you try yourself Always take the precaution of saving the data before you try and then you can always go back a step But you all do that already - right? 73 Fred A65BD - G4BWP user since DOS ver. 2 - Original Message - From: n8d...@comcast.net To: dxbase dxbase@mailman.qth.net Sent: Friday, November 05, 2010 12:34 AM Subject: Re: [Dxbase] DXBase 2007 20 minutes .. Using the info that was provided and its all done manually :)... I wasnt even in a hurry for the update but when I saw the info I just went ahead and did it.. As far as different logging programs go I really could just use 2007 forever as its that easy to add new countries to the database. I have another logging program here that ive been messing with for almost a year I think and it works well and is pretty simple and its free but thats not the reason i chose to try it.. I just tried it for fun:).. Im not gonna mention the name because it really doesnt matter. DxBase is still my #1 choice and ive been using it since the dos days with only one problem! When I started Jack told me my IC-735was out dated and I should buy a new rig if I wanted rig control ( ill bet he doesnt even remember that). Well that didnt set well with me and I bitched till we got it interfaced with dxbase :)... Why do we need constant updates anyway ? If it aint broke dont fix it !.. Sure the updated countries with an automatic updater is a plus but as far as the rest of the program it works for me... Ok off my soap box.. 73 and good DX. Dave N8DC... - Original Message - From: jim cowan ve3...@xplornet.com To: Michael W Elliott k...@sbcglobal.net, Dxbase@mailman.qth.net, W1SKUFrederick W. Holmes w1...@comcast.net Sent: Thursday, November 4, 2010 3:59:33 PM Subject: Re: [Dxbase] DXBase 2007 I too am sticking it out -- I have a lot of PJ contacts and I am hoping that I do not have to go in and change them manually -- If it comes to that I will / can and am able to do so.. Joe saved us on the 40 changes and I am sure he is watching for the changes as we all are... For those that feel that there is better logging programs out there then there is no question and a no brainer --- CHANGE PROGRAMS... Jim ve3...@xplornet.com VE3CM - Original Message - From: Michael W Elliott k...@sbcglobal.net To: Dxbase@mailman.qth.net; W1SKUFrederick W. Holmes w1...@comcast.net Sent: Thursday, November 04, 2010 3:21 PM Subject: Re: [Dxbase] DXBase 2007 I will stick with Neal no hurry as PJ cant be accepted yet also Neal procedure should provide way to update all your entries rather than doing them manually some times progress is slow but sure Michael W. Elliott THE INSIDE ADVANTAGE - RETIREMENT - LEISURE, REST and ONLY ELECTRONIC MAIL PAYMENTS Servant to Bridgett, Collin and all my Creditors St. Louis County Missouri --- On Thu, 11/4/10, Frederick W. Holmes, W1SKU w1...@comcast.net wrote: From: Frederick W. Holmes, W1SKU w1...@comcast.net Subject: [Dxbase] DXBase 2007 To: Dxbase@mailman.qth.net Date: Thursday, November 4, 2010, 1:56 PM ?It seems that support of any kind is at an all time low. We sure do miss Joe and all his efforts to keep DXBase current. Maybe it is time we all look for another logging program. All the other programs that I know of have had the PJ update since the ARRL announced the country codes for them. and some even before. Fred, W1SKU DXBase user since 1989. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase
Re: [Dxbase] paper logs to dxbase.
Tom Your statement about FLE is of no relevance When you import the ADIF files from FLE DXbase assumes the contacts are valid for DXCC 10,000 QSOs (and counting) cannot be wrong! FLE by DF3CB is an excellent programme that allows very Fast entry of paper logs 73 Fred G4BWP - A65BD - Original Message - From: Tom n4...@earthlink.net To: dxbase dxbase@mailman.qth.net Sent: Monday, October 25, 2010 6:28 PM Subject: [Dxbase] paper logs to dxbase. I have been working on entering paper logs in to my computer. I have the first two logs done and I found two problems. One, Fast Log Entry does not set DXBVAL=3. DXbase uses that to indicate the contact is valid for DXCC. If that program is used a lot of manual work will be needed after the import. W3SB's excel spreadsheet does set DXBVAL, so it is better to use with DXbase. Second my old logs are not all in GMT or UTC. I have been working on a C++ program that will help me with automatically converting the local time to UTC. I have the date conversion working but still have work to do. 73 Tom, N4TL __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] No Problems
Terry This has worked for some time, Im not sure how many versions When you have done your SH/DX you can click in the QSY column where there is normally a trick or an X and the radio will QSY. The location is vblank but clicking there works 73 Fred A65BD One other thing I was wondering about, if I do a SH/MyDX and the info comes back from a cluster, is there anyway you can send the radio to one of the returned spots? Yep it will Does this mean it does now, or it will in next version? __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] guys I need some help here
May I suggest to anyone in this situation to try joining Clublog www.clublog.org While its original purpose was a multi-band DXCC ladder for a club it has a very good set of callsign checking algorithms and exceptions to the rules Once you register you can upload your plain ADIF log You will receive back a list of exceptions, calls which do not match the logged country etc. It is worth joining just for that, plus the fun element of seeing your score on a worldwide basis The web site also links to their reflector which is a mine of information and the route o report new exceptions Well worth a try in my opinion FWIW 73 Fred G4BWP - A65BD - Original Message - From: Jim WA9YSD wa9...@yahoo.com To: dxbase@mailman.qth.net Sent: Saturday, January 30, 2010 6:07 PM Subject: Re: [Dxbase] guys I need some help here I have an extreme lack of trust with most programs because of the country data base and call sign prefix confusion cause updates from time to time are not current cause of me not entering them. So I resorted to the manual hunt and find system cause usually in my case the system looks at one prefix as one country and in reality it is another. When this type of thing happens no program makes this an easy job. Garbage in is Garbage out. It is still messed up, true you can get print outs, but the order that it is in is does not correspond to the way LOTW prints it out cause there are all ways a few prefixes out of place which makes it difficult, time consuming, and confusing. Best go to ARRL LOTW Click on AWARDS tab Select your call you want above DXCC AWARD ACCOUNT Click on DXCC AWARD ACCOUNT On the left click on ACCOUNT CREDIT Select RTTY, ALL CREDITS, PREFIX Here you can select what your looking for what you need by a process of elimination. Stay on course, fight a good fight, and keep the faith. Jim K9TF/WA9YSD __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Information from ESET Smart Security, version of virus signature database 4813 (20100128) __ The message was checked by ESET Smart Security. http://www.eset.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Rig QSY when spot has QSX and freq
Joe If you are a brave man maybe you can try and get the TT Omni 7 working! I have been given 2 or 3 different .INI files but none really work, except to read the frequency as a QSO is logged Spot clicking doesnt work at all. Split or no split. Not urgent as I am now using a K3 mainly which does work properly 73 Fred G4BWP / A65BD - Original Message - From: Joe Glockner wa6...@hotmail.com To: dxbase@mailman.qth.net Sent: Wednesday, September 02, 2009 9:52 AM Subject: [Dxbase] Rig QSY when spot has QSX and freq Does anyone, except the ICOM owners, have any problems with any RIG (Radios.ini file) - when you click-on a spot that has the QSX and FREQ info? After going into the Radios.ini file and working with Rolf on his FT-450, I went into my own TS-850 Radios.ini entry and modified it some more for fastest QSY time and 100% accuracy all of the time. If anyone is having a SPLIT (spt with QSX and freq) problem, could you send me an email - just pse reply to this email with what rig you are running. Tnx in advance! 73 Joe wa6axe _ Get back to school stuff for them and cashback for you. http://www.bing.com/cashback?form=MSHYCBpubl=WLHMTAGcrea=TEXT_MSHYCB_BackToSchool_Cashback_BTSCashback_1x1 __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Information from ESET Smart Security, version of virus signature database 4388 (20090902) __ The message was checked by ESET Smart Security. http://www.eset.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Omni 7 again
Bruce Best option I found was to buy an Elecraft K3 If you ever get the Omni 7 talking please let us know. I have tried every sugegstion that has come on the reflector over the last 2 years and no luck I picked up an Omni 6+ later and that works 100%, and is a better radio than the 7 in many respects 73 Fred G4BWP - Original Message - From: Bruce Huyck k...@comcast.net To: Dxbase@mailman.qth.net Sent: Monday, August 10, 2009 6:52 AM Subject: [Dxbase] Omni 7 again I have no plans to abandon DxBase at this time either, but I would like to see my Ten Tec Omni VII to be controlled by DXBase and respond when clicking on a spot. I currently use a radios.ini file that will read the frequency only. To that end, I have spent portions of Saturday and all day playing with the .ini file to make it work. I used my serial port monitor to check the data on several programs and can see what makes other programs work with the Omni VII and it appears that I am still missing something in the radios.ini file. I have logged each change that I made and what results were produced, but I seem to be at a roadblock and need a little help. Does anyone have more detailed documentation on the radio.ini file options other than what is in the help file?? I have not given up yet, but I am just worn out at the moment.If and when I get it working, I will publish the results to the group. Bruce KS4V __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Information from ESET Smart Security, version of virus signature database 4327 (20090811) __ The message was checked by ESET Smart Security. http://www.eset.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Field Order help
Jon To get to see the new ordered log you need to open user options and tick database and field order in the general tab Then shut DXB and reopen. You see a menu where you can choose the new column order Once you are happy with what you have done you can un-tick the box and DXB will start without showing that menu Be prepared for all your log book columns to have defaulted to the base width once you make that change, very annoying! 73 Fred A65BD/G4BWP - Original Message - From: Jon Casamajor k...@comcast.net To: dxbase@mailman.qth.net Sent: Wednesday, July 01, 2009 10:16 PM Subject: [Dxbase] Field Order help The help file in 2007 points you to run a utility programnamed FLDORDER which doesn't exist in the program group here. I run Dxbutility, click on Field Order and up pops a screen to create a field order file. Click on new and the two lists of DXB fields are populated. I've moved the fields around on the left column to my liking, clicked save and saved the file as a .CO file type. When I restart DXB I get no message asking me to select the CO file, it just comes back as the default. The default is really getting under my skin as most of the content is useless to my needs and I end up scrolling over to say, Grid or the QSL columns etc constantly. What am I doing wrong trying to rearrange my view of the log? Thanks in advance! Regards, Jon-K6EL k...@comcast.net __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Information from ESET Smart Security, version of virus signature database 4205 (20090701) __ The message was checked by ESET Smart Security. http://www.eset.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Records not being exported
Peter DXbase does some strange things if the operator's callsign is not the registred callsign! Try making sure that all entries have your callsign as the operator 73 Fred A65BD - Original Message - From: Peter Dougherty w2...@verizon.net To: Dxbase@mailman.qth.net Sent: Friday, May 29, 2009 8:10 PM Subject: [Dxbase] Records not being exported Hello all, I'm attempting to export an entire log to an ADIF file. According to the window below the date/time fields, there are 2808 records. When I export everything using the wizard (with no filters selected), only 2765 records are getting exported. I've tried compacting and repairing the .mdb file using the DXB Utility, and I've verified many times that nothing in the QSO filters selection is cutting back on the export. I use the same settings to export my primary log of ~25,000 QSOs and it all exports perfectly. Any thoughts on where to look for the discrepancies? This is too complex for manual checking. Thanks in advance. --- Regards, Peter, W2IRT __ Information from ESET Smart Security, version of virus signature database 4132 (20090604) __ The message was checked by ESET Smart Security. http://www.eset.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Information from ESET Smart Security, version of virus signature database 4132 (20090604) __ The message was checked by ESET Smart Security. http://www.eset.com __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] Creating new database 2007
Jack That is not exactly true If you work a new one on the statellites it DOES count for the basic (mixed) and mode DXCCs. DXCC Rule 1 Perhaps unlikley but they DO count 73 Fred G4BWP - Original Message - From: Jack j...@dxbase.com To: Joe jbark...@vnet.net; dxbase@mailman.qth.net Sent: Thursday, February 26, 2009 5:35 PM Subject: Re: [Dxbase] Creating new database 2007 Joe, Satellite Qs don't count for usual awards and the stats are therefore not included in the normal Summary Window. There is a spot in the lower right main Window that shows SAT entry but it is only for mixed ... no individual band/mode stuff. Jack - Original Message - From: Joe jbark...@vnet.net To: dxbase@mailman.qth.net Sent: Thursday, February 26, 2009 8:11 AM Subject: [Dxbase] Creating new database 2007 Hello, I created a new database to put my satellite contacts into. I wanted to able to look at just those contacts for grid and award purposes. I imported an adif file containing those contacts and they show in the new database log. When I go to the statistics area I do not get anything though. I initialized tables and not sure what else I need to do. Any tips would be appreciated. Thanks Joe __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] DXBase and Vista32bits
Jean I am sure you will find this in the archives, it coems up every month or so. It has not affected me yet as I still on XP, but remember that running as an administrator may be the solution GL 73 Fred G$BWP - Original Message - From: ON5JV To: dxbase@mailman.qth.net Sent: Monday, February 16, 2009 2:58 PM Subject: [Dxbase] DXBase and Vista32bits Dear all, I have installed DXB2007 and the license keys and the .mdb files without any problem and it works fine now. (Tnx to Wes N7WS) We have just a problem with the DXcluster, the Host file to access to DXCluster is empty. In FileModify Hosts File we have the mention Unable to locate or open hosts file The same message in users option Internet (IP Host) It is impossible to write anything in it ! Please, is there somebody who can help us ? Many thanks. Best regards,73's Jean ON5JV and Georgette ON6AK on5jv.on...@skynet.be -- __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html__ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] ITU Zones
Hello Gary I am sorry but you have been assured wrongly!!! On behalf of RSGB, and based on some very detailed research by G3KMA and G3HTA, I wrote a paper on the definition of ITU Zones for amateur use for the IARU Region 1 conference some year back. This paper was eventually adopted by ALL IARU Regions which includes the USA! I quote W9 (IL, WI west of 90W) in ITU zone 7 W9 (IL, WI east of 90W) in ITU zone 8 ITU zones are used by the ITU for broadcast purposes and have been used for Amateur Radio for contests and awards. They are defined largely by lines of latitude and longitude (not state boundaries!) ARRL had previously published a version of the ITU zone boundaries which conveniently bent around some state boundaries but this was superceded by my papaer adopted by all IARU regions including ARRL There many other exceptions where national boundaries are crossed by ITU zones and some countries like UA/0 have many ITU zones in them. 73 Fred G4BWP Editor RSGB Prefix Guide - available from ARRL and other outlets - Original Message - From: Gary AL9A To: dxbase@mailman.qth.net Sent: Thursday, February 12, 2009 12:58 AM Subject: Re: [Dxbase] ITU Zones Ok, now that I've been assured that IL is in ITU Zone 8 causes some questions. How in the world did I get my IL mdb file set up so that the ITU default was 6 and not 8? Next question: How do I fix these in my log? I can't just find and replace all 6's with 8's as some probably should be in zone 6. If I set up my TQSL with the correct zone numbers and then upload the logs with the bad numbers will that create a problem for LOTW users? Any help appreciated. 73, Gary AL9A __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dxbase] IC-746pro
Guys I was an Icom user and did have my 756 Pro3 backup radio working with DXB2007 at one time I did suffer some problems with one s/w package (probably NOT DXbase) in that the radio has its address set in Hex anmd the s/w was using decimal, or the opposite was around. Look out for that. 73 Fred G4BWP - Original Message - From: Greg - N4CC [EMAIL PROTECTED] To: [EMAIL PROTECTED]; JV [EMAIL PROTECTED] Cc: dxbase@mailman.qth.net Sent: Friday, June 13, 2008 2:45 PM Subject: Re: [Dxbase] IC-746pro A friend of mine just bought a 746 Pro and he is having trouble getting it to respond to DXBase 2007. I downloaded the manual from the Icom site and see that the you can set the address by going to the set-mode...item 36 sets baud rate and 37 is the address. My friend's radio was set to 66h which appears to be what is in the .ini file. If you get an answer, I hope you'll post it to the reflector... Thanks and 73 de Greg-N4CC At 08:10 AM 6/12/2008, Chris Poulson wrote: Hi, Not 100% sure of the exact details but you need to find which address your ICOM is set to in the Menus, then you will need to edit the section in Radios.ini that relates to your radio and change the address to the same as the radio. I don't have an Icom anymore so this is from my poor memory :-) On Mon, 9 Jun 2008 19:03:38 -0400 (Eastern Daylight Time), you wrote: Need a little help. Any one have an IC-746pro running with DXBase2005. For some reason I can't get the computer to talk with the IC-746pro. Radios ini is installed and I think I have Options/Radio 1 set up for IC-746pro. Got to be some thing simple that I'm over looking. Maybe in the polling??? What are you guys using in Radios.ini or in the setup? The interface is working OK with my contest program N1MM Logger. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net Chris Poulson __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
[Dxbase] DXBase with Ten Tec Omni 7?
Hello All and Season Greetings Taking advantage of the Holiday I am integrating a new Omni 7 into my station after 2 months of ownership! In the DXBase Radio pull down there is no reference to the Omni 7 Is there an update I can get, or do I use the Orion settings? If someone could help I would be greatful and I'm sorry if it has been covered before when I wasnt paying attention! 73 Fred G4BWP
[Dxbase] No-Bureau entities in your Primary Prefix Table -- listing
Joe There is just one point in this that could be mis-understood The DM referred to is an old deleted DXCC for Germany The current Germany (the Federal Republic of Germany) DXCC entity uses the DM prefix again and you CAN QSL these station via the DARC bureau. 73 Fred G4BWP - Original Message - From: Joseph Glockner [EMAIL PROTECTED] To: DXBase Reflector dxbase@mailman.qth.net Sent: Monday, August 27, 2007 4:27 AM Subject: [Dxbase] No-Bureau entities in your Primary Prefix Table -- listing To all: For those DXbase users who are using the GlobalQSL service, the report/exe file I have made is using the data from your Refdata.mdb file -- BUREAU info -- If you wish to check and/or update your Primary Prefix Table -- go to: Main Menu / Tools / Database Access / Country Prefixes / Primary tab --- and update the column entitled: Bureau Here is a complete CURRENT listing of the Entities/Countries that should ** NOT ** have a Checkmark in the BUREAU column of your DXbase's Primary Prefix TABLE: PREFIX COUNTRY 1AKnights of Malta 1MMinerva Reef 1SSpratly Island 3B6 Agalega - St Brandon 3B8 Mauritius 3B9 Rodriguez Island 3CEquatorial Guinea 3C0 Annobon Island 3DA Swaziland 3WVietnam 3XRepublic of Guinea 4JAzerbaijan 4WTimor - Leste 4W1 Yemen Arab Republic 5ALibya 5RMadagascar 5TMauritania 5UNiger 5VTogo 7J1 Okino Tori-shima 7OYemen 7PLesotho 7QMalawi 8QMaldive Islands 8Z4 Saudi/Iraq Neutral 8Z5 Kuwait/Saudi Neutral 9LSierra Leone 9NNepal 9S4 Saar 9UBurundi 9U5 Ruanda-Urundi 9XRwanda A3Republic of Tonga A5Bhutan A6United Arab Emirates AC3 Sikkim AC4 Tibet BHRF Blenheim Reef BS7 Scarborough Reef BV9 Pratas Island C2Nauru C5The Gambia C6Bahamas C9M Manchuria CNMorocco CN2 Tangier CR10 Portuguese Timor CR8D Damao, Diu CR8G Goa D2Angola DMGermany E3Eritrea E4Palestine EA9I Ifni FB8 Comoros FFFrench West Africa FI8 French Indo-China FK/C Chesterfield Islands FN8 French India FQ8 Fr. Equatorial Afric GYRF Geyser Reef HHHaiti HK0B Bajo Nuevo HK0R Serrana Bank/Roncadr HVVatican City I1Trieste I5Italian Somaliland J2/A Abu Ail J5Guinea-Bissau J8St. Vincent JZ0 Netherlands Guinea K United States KH0 Mariana Is. Saipan KH1 Baker - Howland Is. KH4 Midway Island KH5 Palmyra Island KH5K Kingman Reef KH7K Kure Island KH9 Wake Island KP1 Navassa Island KP5 Desecheo Island KR6 Okinawa (Ryukyu Is) KS4 Swan Island KZ5 Canal Zone OK1 Czechoslavakia P2Papua New Guinea P5North Korea PK1 Java PK4 Sumatra PK5 Netherlands Borneo PK6 Celebe - Molucca Is. PZSuriname S0Western Sahara S7Seychelles
[Dxbase] Settings for IC-756 Pro II and DXB2007 Needed
John I had mine (Pro 3) working when I was last at home, altho I am slightly confused as the subject says a Pro 2 and the message a Pro 3? I have a Pro 3. 756Pro3 plus Microham interface with the latest SW/FW downloaded No problems I am now at my second/work QTH in A6 so no way to look up any settings but I dont think I changed anything, just selected the right (virtual) COM port and the radio from the pull down menus Good luck 73 Fred G4BWP - Original Message - From: John Farber [EMAIL PROTECTED] To: dxbase@mailman.qth.net Sent: Wednesday, May 02, 2007 9:57 AM Subject: [Dxbase] Settings for IC-756 Pro II and DXB2007 Needed Is anyone successfully controlling their IC-756 Pro III with DXB2007? If so, can you please tell me what settings you are using. I'm having troubles with my setup. Thanks, John KG6I. __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
[Dxbase] Radio interface Kenwood TS450S
David, Jim There is a project for an interface bewteen a Kenwood rig and RS232 in the 2006 ARRL handbook, P19.41 onwards, reprinted from QST Feb 1993. This would replace the IF232C if you dont want to buy one (assuming you still can?) 73 Fred G4 BWP - Original Message - From: Jim Dawson [EMAIL PROTECTED] To: dxbase@mailman.qth.net Sent: Monday, April 23, 2007 2:13 PM Subject: Re: [Dxbase] Radio interface Kenwood TS450S I no longer own a Kenwood radio, but I don't think it is as simple as hooking up a serial cable to the DIN connector on the TS-450. I don't believe the 450 has a RS232 compatible serial port, you must use a level converter like the Kenwood IF232C, which will give you the RS232 interface your looking for. Then it is as simple as connecting the cable. Jim - K9DD - Original Message - From: David Gerrard [EMAIL PROTECTED] To: dxbase@mailman.qth.net Sent: Monday, April 23, 2007 1:22 AM Subject: [Dxbase] Radio interface Kenwood TS450S I've read the help files and the online information from DXbase, and I think I'm ready to connect the computer to the rig. Last check.is it just a DB9 serial plug cable to a DIN that I need to interface to the radio? Nothing else? Totally plug play? Or will I need to do some config exercises after the cable is in place? If anyone reading has connected a Kenwood TS450 successfully, I'd appreciate it if you could drop me a direct email to [EMAIL PROTECTED] and tell me how it went. Thanks David __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
[Dxbase] Simple back up
I use a software package from VCOM called Autosave It automatically backs uop files you use, I use an external USB HDD for some redundancy. It has saved me more than once and once it is set up you have to do NOTHING to be backed up! You can buy it from the web. 73 Fred G4BWP - Original Message - From: Ed Eklin [EMAIL PROTECTED] To: Dxbase@mailman.qth.net Sent: Saturday, April 07, 2007 4:33 PM Subject: [Dxbase] Simple back up Is there a simple way to back up DxBase without going thru all the steps to the folder? Tnx Ed K8ZZ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
[Dxbase] Previous QSO Module
I believe this is/was a new feature in 2007? I find it very useful when going through bureau cards I would like a feature that finds callsigns that almost match, but differ by 1 letter or digit. Most logging errors are only 1 element out (eg CW copying U for V etc) The ability to switch on or off either search mode would be a nice addition too. 73 Fred G4BWP - Original Message - From: Art Holmes [EMAIL PROTECTED] To: 'Ben Akins' [EMAIL PROTECTED]; dxbase@mailman.qth.net Sent: Monday, January 29, 2007 2:18 PM Subject: RE: [Dxbase] Previous QSO Module I see the same thing. Art w1rzf -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ben Akins Sent: Monday, January 29, 2007 9:12 AM To: dxbase@mailman.qth.net Subject: [Dxbase] Previous QSO Module Hello all, A strange thing just happened just not to me while trying to update some entries. I entered the call K1DG, then Find. I got a list of 5 K1DG worked but I also got 2 OK1DG. I then asked for OK1DG and only got the 2 entries, as it should be. I had noticed a similar occurrence once before but I didn't think much of it. I did the initialize thing and just assumed it solved the problem. I did not try to repeat it before. This time I initialized and the problem repeated itself. I am using 2007. I have never had it happen before. I am in the process of updating all my cards and have been putting the program through it's paces. Is there something I have done wrong or is there something I should have done? Has anyone else experienced this happening to them. I have not notice any activity on the Reflector. Thanks, Ben KB1FJ __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
[Dxbase] DXBase wishlist
It seems the latest version of Logic does this also according to my friend who uses it. 73 Fred G4BWP - Original Message - From: Greg - N4CC [EMAIL PROTECTED] To: dxbase@mailman.qth.net Sent: Thursday, January 25, 2007 12:50 AM Subject: [Dxbase] DXBase wishlist Jack -- saw this as part of a note on the Florida Contest Group reflector...a fellow talking about ACLog... Using LOTW through my logging program is truly painless and a simple thing of beauty. Press one button, enter a password and the software figures out the latest unsubmitted Q's and uploads them automatically. Then press another and download the confirmations. The Q's that are confirmed are then marked in the log database as received and the awards page automatically shows the credit tally. That would be pretty slick for DXBase...73 de Greg-N4CC __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
[Dxbase] MicroHam CW keyer and Omni 6 interface cable?
Chuck The great thing about Microham is that they publish on their web site schematics of all their cables so you can make your own if you want to. Its handy when u change rigs etc http://www.microham.com/Downloads/CAT%20CIV.pdf is the cable for the Omni VI Its a mini stereo at the Mucirham end and a mono mini at the TT end For the other MH units look under support 73 Fred G4BWP - Original Message - From: Chuck Guenther [EMAIL PROTECTED] To: dxbase@mailman.qth.net Sent: Sunday, January 14, 2007 8:59 PM Subject: [Dxbase] MicroHam CW keyer and Omni 6 interface cable? Anyone else out there using the microHam CW keyer with DXBase and an Omni 6 rig? What kind of cable is used for the radio interface? Is it as simple as a cable with mini stereo phone plugs at both ends? Or does it have a 25-pin connector at the radio end? I purchased the keyer for use with my K2, and couldn't get it to work with my newly built KIO2 interface. So, I tried hooking up the keyer to the Omni 6 with just the stereo plug and couldn't get communications with the Omni either. Hope I haven't damaged the keyer. 73, Chuck NI0C __ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net