Re: [Elecraft] Order status query goes unanswered
Eric has asked that the tread be closed. He's also given alternatives to making this kind of complaint in public. I can think of at least one other way to get through to Elecraft that doesn't involve the list or an overseas call. Thanks everyone for your consideration. 73 -- Lynn On 3/6/2015 2:35 PM, Stewart wrote: Eric, I have made enquires about my order status using sal...@elecraft.com and sa...@elecraft.com addresses. To date I have yet to receive an answer from either... 73 Stewart G3RXQ On Fri, 06 Mar 2015 13:07:18 -0800, Eric Swartz - WA6HHQ, Elecraft wrote: Thread closed. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
This mainly for Jay, W6CJ. Don answered your question about the availability of the K-1 4 band module. That is a shame as it really made the K-1 more versatile. I am really enjoying mine. You also asked about the stability of the K-1's VFO. I had not heard of any issues before buying mine and haven't had any problems. There is a small drift when first turned on, but stabilizes within a short time (minutes). If you had a signal within the bandpass, it will not drift outside the bandpass during warmup. After the rig has been on a few minutes you will not notice any drift. Of course this is only my experience. Mike, AC4UR Using K-1 # 583 (with all mods, updates and a 4 band module) http://sunbyrdpress.blogspot.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
There is probably some middle ground here to satisfy most people in this situation. It's completely understandable and correct that Elecraft would not want to spend the effort to re-engineer this board. However some of us on channel don't see the task as rocket science and in most cases would be glad to provide that expertise as a side effort just to make that equipment useful. If Elecraft had even something as simple as unpopulated boards to purchase for use as prototypes, it would make that task quite simple. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch - K9ZC Staunton, Illinois Owner - Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: www.VillaGrandPiton.com email: b...@wjschmidt.com -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Friday, March 06, 2015 8:05 PM To: Ross Primrose; Phil Wheeler; elecraft@mailman.qth.net Subject: Re: [Elecraft] K-1 4-band Availability/Status? Ross, That vital part is the availability of the 1 to 40pF trimmer capacitors - which also had a very tight temperature compensation characteristic. The KFL1-4 used 16 of them. Due to their wide capacity range, the same capacitors could be used in all 16 positions and provide successful tuning. Those capacitors have been discontinued by the manufacturer. The problem is that there are no substitutes that could be used for all 16 positions, and it would take a great deal of engineering effort to determine the suitable substitutes for each position on the 4 band board. In other words, would a 3 to 15pf trimmer be suitable in the C1 thru C4 locations and would a 12 to 30pF trimmer be suitable in the C5 thru C8 locations and so forth. Furthermore, if the 17 meter band were chosen instead of the 15 meter band, which low range trimmer capacitors would be used for each band. I am speaking of examples for the engineering effort that would be required to select the best capacitor for each position and each band choice. It is not a trivial exercise. I certainly would not want to do experiments to select the appropriate replacement trimmers necessary to resurrect the 4 band board, and I am certain the engineering staff does not have the time to do that work. The documentation would get more complicated as well - for example, if you have chosen the 15 meter band, use the red trimmer capacitors at location Cx but if you have chosen 17 meters, use the yellow trimmers at those locations Hopefully you get the point of the complexity created by those wide range trimmer being no longer available. The values I have proposed above are only numbers off the top of my head for examples, they have no value in the real world. 73, Don W3FPR On 3/6/2015 6:46 PM, Ross Primrose wrote: Looking at the parts list, I can't imagine which part is no longer available 73, Ross N4RP On 3/6/2015 4:37 PM, Phil Wheeler wrote: Confirm. Something related to a vital part(s?) no longer being available. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to b...@wjschmidt.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 4band K1
Yep, I bought a used K1 based on the Elecraft website which still has the 4 band board listed. After I bought the rig I realized there was no price on the order form for the 4 band board. I wrote an email to Elecraft Sales and was told some of the parts for that board became scarce so no more. My suggestion would be to remove the board feom the website entirely. However, its my second K1 and I intend to hang on to it. Now I just need to decide what to build to pick up a few more bands. Yeah, I know but I already built two K2s and a K3 so I'm aiming a little lower this time. Maybe a KX1. de ke4d John Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
Ross, That vital part is the availability of the 1 to 40pF trimmer capacitors - which also had a very tight temperature compensation characteristic. The KFL1-4 used 16 of them. Due to their wide capacity range, the same capacitors could be used in all 16 positions and provide successful tuning. Those capacitors have been discontinued by the manufacturer. The problem is that there are no substitutes that could be used for all 16 positions, and it would take a great deal of engineering effort to determine the suitable substitutes for each position on the 4 band board. In other words, would a 3 to 15pf trimmer be suitable in the C1 thru C4 locations and would a 12 to 30pF trimmer be suitable in the C5 thru C8 locations and so forth. Furthermore, if the 17 meter band were chosen instead of the 15 meter band, which low range trimmer capacitors would be used for each band. I am speaking of examples for the engineering effort that would be required to select the best capacitor for each position and each band choice. It is not a trivial exercise. I certainly would not want to do experiments to select the appropriate replacement trimmers necessary to resurrect the 4 band board, and I am certain the engineering staff does not have the time to do that work. The documentation would get more complicated as well - for example, if you have chosen the 15 meter band, use the red trimmer capacitors at location Cx but if you have chosen 17 meters, use the yellow trimmers at those locations Hopefully you get the point of the complexity created by those wide range trimmer being no longer available. The values I have proposed above are only numbers off the top of my head for examples, they have no value in the real world. 73, Don W3FPR On 3/6/2015 6:46 PM, Ross Primrose wrote: Looking at the parts list, I can't imagine which part is no longer available 73, Ross N4RP On 3/6/2015 4:37 PM, Phil Wheeler wrote: Confirm. Something related to a vital part(s?) no longer being available. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Order status query goes unanswered
Eric, I have made enquires about my order status using sal...@elecraft.com and sa...@elecraft.com addresses. To date I have yet to receive an answer from either... 73 Stewart G3RXQ On Fri, 06 Mar 2015 13:07:18 -0800, Eric Swartz - WA6HHQ, Elecraft wrote: Thread closed. In the future, if you have problem like this, please immediately give us a call. We'll certainly help you right out. I wasn't aware the automated reply said to email sales3 - While we do read that daily, we'll see if we can correct that to sa...@elecraft.com Lastly, Guys - it is in violation of list guidelines to -personally- criticize other's postings with negative, overly critical or snide remarks. Keep it polite. If you have a problem with a posting, please email the moderator. (me) .. Do not privately -or- publicly chastize the poster. Doing so is rude and risks being removed from the list. If you can't keep it polite, don't send the email. 73, Eric moderator, co-owner and the buck-stops-here guy.. elecraft.com On 3/4/2015 1:28 PM, David Cole wrote: Too bad, everyone knows what happened, everyone knows how Elecraft handled it, everyone knows what will happen, and everyone knows Elecraft will do good to make this right... Everything beyond that is just drama... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to stew...@twinwood.me __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] T1 is sold
The T1 has been sold. Carl Yaffey K8NU Recording studio. cyaffeyno_s...@gmail.com 614 268 6353, Columbus OH http://www.carl-yaffey.com http://www.grassahol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K312MDKT gone
The mod kit has been spoken for. Ted, KN1CBR -- Message: 31 Date: Fri, 6 Mar 2015 23:10:19 + From: Dauer, Edward eda...@law.du.edu To: elecraft@mailman.qth.net elecraft@mailman.qth.net Subject: [Elecraft] K312MDKT Free to a Good Home Message-ID: d11f81e9.d96c%eda...@law.du.edu Content-Type: text/plain; charset=iso-8859-1 Anyone need the K312MDKT mod? (Mod raises the current available from the K3's 12VDC OUT connector from 0.5 to 1.0 amp.) I just installed the SVGA option in the P3. The SVGA kit came with the mod, which I don't need - the K3 is new enough to have a labelled 1.0 amp capability. First to send me (off list) an e-mail request and mailing address gets it, no charge. I'll send it as I received it in the SVGA box, no warranty made by me. If all goes well later today I may have a couple of old-style synth boards available a as well. We'll see . . . Ted, KN1CBR -- Subject: Digest Footer ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must be a subscriber to post. Elecraft web page: http://www.elecraft.com -- End of Elecraft Digest, Vol 131, Issue 10 * __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KSYN3A Install
The install in two K3s, each with one receiver, went well. Make sure you connect the cable to the correct port on the ksyn3a. Don't ask me why. The K3 is the greatest! 73, Steve, k4fj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 to KPA500 and KAT500
I am having to send my K3 in for Repair. Is there a way I can hook up my KX3 in place of my K3 to have the KPA500 and KAT500 work with it? Any help would be greatly appreciated. I checked the manual, but did not see it. Thank you Gerald Manthey - KC6CNN - KC6CNN - Gerald K2 # 5486 K3 # 6254 KX3 # 757 -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-to-KPA500-and-KAT500-tp7599825.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 SUB-RX works , but not in diversity mode
Are you connecting a cable from the RX antenna Out to the AUX antenna In ? If so why? From: Klaus Dittrich kla...@arcor.de To: elecraft@mailman.qth.net Sent: Friday, March 6, 2015 7:15 AM Subject: [Elecraft] K3 SUB-RX works , but not in diversity mode SUB-RX works (gets signals) but not in diversity mode. I assembled K3 serial# 8887 (FW-5.14) so far succesful but have a problem with the SUB RX and diversity. I plugged the coax from the BNC AUX-RX into the KRX3 at assembly time. When I switch on the SUB RX it gets its antenna input from there, which I can verify by plugging out the antenna connected to BNC AUX-RX and do not hear anymore the signals received before. So the connection between the antenna connected to AUX-RX and the KRX3 is already established and working. ! When I now, while SUB is active, press and hold SUB, the diversity ! mode is established and the decimal point of VFO A starts blinking, ! I hear a relay switching noise out of the K3 and the signal received ! by the SUB-RX before went off. So it looks to me as if the KRX3 is disconnected from my receiving antenna by switching from SUB to SUB-diversity. What gets switched at this moment and why? Switching on diversity should only bind/link the SUB RX to VFO A (the same as pressing A-B after changing frequency) but phase coupled this time, or I am totally wrong? Switching between Config:KRX3 ATU and AUX makes on difference, and no relay clicking is audible. Can anyone with a newer K3 (and new syntesizers) tell me if he is oberserving the same behavior? I am not quite shure if I have overlooked something at assembly time or if this is a firmware bug. -- 73, Klaus, DF1TL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] connecting KX3 with KPA500
Thanks I got it figured out. Sorry for bandwidth. - KC6CNN - Gerald K2 # 5486 K3 # 6254 KX3 # 757 -- View this message in context: http://elecraft.365791.n2.nabble.com/connecting-KX3-with-KPA500-tp7559084p7599827.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K312MDKT Free to a Good Home
Anyone need the K312MDKT mod? (Mod raises the current available from the K3's 12VDC OUT connector from 0.5 to 1.0 amp.) I just installed the SVGA option in the P3. The SVGA kit came with the mod, which I don't need - the K3 is new enough to have a labelled 1.0 amp capability. First to send me (off list) an e-mail request and mailing address gets it, no charge. I'll send it as I received it in the SVGA box, no warranty made by me. If all goes well later today I may have a couple of old-style synth boards available a as well. We'll see . . . Ted, KN1CBR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
Looking at the parts list, I can't imagine which part is no longer available 73, Ross N4RP On 3/6/2015 4:37 PM, Phil Wheeler wrote: Confirm. Something related to a vital part(s?) no longer being available. 73, Phil W7OX On 3/6/15 1:25 PM, J wrote: I was interested in building a K-1 4-band, but learned the 4-band boards are unavailable. Can someone confirm or deny? Also, there was a VFO drift issue in the first K-1's I'd read about. I was curious if this issue was resolved or still exists. Thanks, Jay W6CJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@n4rp.com -- FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.” __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
The very tight temperature coefficient trim caps that are needed for the 4 band board became unavailable. 73, Eric elecraft.com On 3/6/2015 3:46 PM, Ross Primrose wrote: Looking at the parts list, I can't imagine which part is no longer available 73, Ross N4RP On 3/6/2015 4:37 PM, Phil Wheeler wrote: Confirm. Something related to a vital part(s?) no longer being available. 73, Phil W7OX On 3/6/15 1:25 PM, J wrote: I was interested in building a K-1 4-band, but learned the 4-band boards are unavailable. Can someone confirm or deny? Also, there was a VFO drift issue in the first K-1's I'd read about. I was curious if this issue was resolved or still exists. Thanks, Jay W6CJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@n4rp.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Order status query goes unanswered
Hi Stewart, Lisa (sa...@elecraft.com) sent you a reply in response to your original email inquiry. She also just sent you another email on this shortly after you posted the email below. Have you received her latest reply? Our replies frequently get caught inadvertently in customer spam filters. You might also want to check there. (I'm answering you directly and via the list to make sure you get the reply.) 73, Eric elecraft.com On 3/6/2015 2:35 PM, Stewart wrote: Eric, I have made enquires about my order status using sal...@elecraft.com and sa...@elecraft.com addresses. To date I have yet to receive an answer from either... 73 Stewart G3RXQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Useful P3 feature
Yep, that would be cool, although I'm not sure it's doable. Would likely work if you were switching bands often, but if you don't come back to a band in a reasonable time, the average may be as invalid as REF LVL currently is. I generally take K9YC's advice if it pertains to audio, sometimes I'm a little slower on non-audio things. Jim runs P3 spectrum averaging as high as it will go. I never did ... fascination with the jumping spectrum display? I'm currently running at 12 for the spectrum and OFF for the WF and the WF is what I look at and I like the results. I find I don't have to adjust the REF LVL nearly as much. Having found out that 12 is safe for averaging, I may push it up. But, seriously, to my surprise, it really does tend to hold the REF LVL much more constant which is what I was looking for in the first place. 73, Fred K6DGW - Northern California Contest Club - CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015 - www.cqp.org On 3/6/2015 4:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: I don't want to save the REF LVL. I want to save its relationship to the noise level. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Order status query goes unanswered
Lynn, I can read. It was not a complaint, but a statement... However, my post was directed straight to Eric with others on the reflector being included. Stewart G3RXQ On Fri, 06 Mar 2015 14:47:41 -0800, Lynn W. Taylor, WB6UUT wrote: Eric has asked that the tread be closed. He's also given alternatives to making this kind of complaint in public. I can think of at least one other way to get through to Elecraft that doesn't involve the list or an overseas call. Thanks everyone for your consideration. 73 -- Lynn On 3/6/2015 2:35 PM, Stewart wrote: Eric, I have made enquires about my order status using sal...@elecraft.com and sa...@elecraft.com addresses. To date I have yet to receive an answer from either... 73 Stewart G3RXQ On Fri, 06 Mar 2015 13:07:18 -0800, Eric Swartz - WA6HHQ, Elecraft wrote: Thread closed. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to stew...@twinwood.me __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 external battery (Maxtron) VERY NOISY
Yup. It is not a 12 or 13.8V battery, but rather a low voltage source that has a switching circuit ( aka noise) that generates the higher voltages, These are designed to do as advertised and charge phones and tablets at relatively low current. If you want battery operation, an SLA or LIFE battery is your best choice. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-external-battery-Maxtron-VERY-NOISY-tp7599790p7599799.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Useful P3 feature
I don't want to save the REF LVL. I want to save its relationship to the noise level. I agree. Put another way, I'd like to see a reverse baseline clamp - something along the line of holding REF LVL 5 dB below the average noise level. 73, ... Joe, W4TV On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: Here is something I would like to see on the P3. The P3 saves the REF LVL setting per band. But of course the noise level on a given band varies as conditions change, and I find myself often adjusting the REF LVL. The optimum setting is with the REF LVL just below the noise level. Setting it higher loses detail, and setting it lower fills the waterfall with noise. What I would like would be to adjust the REF LVL to optimum with respect to the noise level and then save this relationship. Then I would like to be able to push a function button to automatically adjust the REF LVL to re-establish the same relationship. This would make the readjustment, which I find myself making every few minutes sometimes, much quicker and easier. I don't want to save the REF LVL. I want to save its relationship to the noise level. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] MFJ 434B Connections
Hi Mark, I have been intending to respond to your posting below for ages but am afraid it's only just got to the top of the stack - sorry! Although I am not a particularly frequent telephony operator, I have used the MFJ 434B with the K3 and it works just fine. Because I use my Heil headset with several different (in Field Days etc) I have had to confront the problem of different vendors using different microphone connectors - and even worse, the same connector with different pinoutsmy solution was to wire the microphone plug to the Yaesu standard - with apologies for using the Y word on the Elecraft list :-) - , set the headers in the MFJ to the Yaesu standard (and also the appropriate header to apply the polarising voltage to the electret microphone insert), and then build individual Yaesu - Elecraft, Yaesu - Icom etc. adapters for rigs that don't use the Yaesu pinouts. I'm afraid I don't know where you can buy pre-made cables, but making up the adapters is straightforward if a bit fiddly. I don't know if that will help in your particular situation (I suspect perhaps not), but on the principle that any info might come in useful I thought I'd chip in. 73, Quin G3WRR From: pastor...@verizon.net pastor...@verizon.net To: elecraft@mailman.qth.net Sent: Wednesday, 25 February 2015, 4:05 Subject: [Elecraft] MFJ 434B Connections Hi, this is Mark Griffin, KB3Z. Has anyone connected a MFJ 434B Voice Keyer to the K3? I assume that I would connect my Heil HM-12 microphone to the external microphone jack on the front of the unit. The man from MFJ said I would have to set up the jumpers in the unit for a Kenwood. But for some oddball reason they use a modular cable plug to connect the 434B to my K3. I realize I would have to use the MIC Connector on the back of my K3 and would have to make the necessary change with the K3 so it knows that I am using the MIC connector in the back. But where do I find one of these Modular cables to connect the 434B to the K3. Any help or advice would be very much appreciated. Mark Griffin KB3Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to q.g.coll...@btinternet.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 SUB-RX works , but not in diversity mode
SUB-RX works (gets signals) but not in diversity mode. I assembled K3 serial# 8887 (FW-5.14) so far succesful but have a problem with the SUB RX and diversity. I plugged the coax from the BNC AUX-RX into the KRX3 at assembly time. When I switch on the SUB RX it gets its antenna input from there, which I can verify by plugging out the antenna connected to BNC AUX-RX and do not hear anymore the signals received before. So the connection between the antenna connected to AUX-RX and the KRX3 is already established and working. ! When I now, while SUB is active, press and hold SUB, the diversity ! mode is established and the decimal point of VFO A starts blinking, ! I hear a relay switching noise out of the K3 and the signal received ! by the SUB-RX before went off. So it looks to me as if the KRX3 is disconnected from my receiving antenna by switching from SUB to SUB-diversity. What gets switched at this moment and why? Switching on diversity should only bind/link the SUB RX to VFO A (the same as pressing A-B after changing frequency) but phase coupled this time, or I am totally wrong? Switching between Config:KRX3 ATU and AUX makes on difference, and no relay clicking is audible. Can anyone with a newer K3 (and new syntesizers) tell me if he is oberserving the same behavior? I am not quite shure if I have overlooked something at assembly time or if this is a firmware bug. -- 73, Klaus, DF1TL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Useful P3 feature
Here is something I would like to see on the P3. The P3 saves the REF LVL setting per band. But of course the noise level on a given band varies as conditions change, and I find myself often adjusting the REF LVL. The optimum setting is with the REF LVL just below the noise level. Setting it higher loses detail, and setting it lower fills the waterfall with noise. What I would like would be to adjust the REF LVL to optimum with respect to the noise level and then save this relationship. Then I would like to be able to push a function button to automatically adjust the REF LVL to re-establish the same relationship. This would make the readjustment, which I find myself making every few minutes sometimes, much quicker and easier. I don't want to save the REF LVL. I want to save its relationship to the noise level. -- 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: Rigol DSA815-TG Tracking Generator Spectrum Analyzer
Hello Elecrafters, About two years ago, I bought this Spectrum Analyzer with a view to doing some RF projects. Eventually, I did not have the time and have left this unit packed and unused. This analyzer was only turned on a few times to checkfunctionality. It comes with alloriginal accessories, certificates, unit is as new. Works from kHz ~GHz, it is great for tuning antennas, filters, duplexers etc. For details, please visit Rigol official website http://www.rigol.com/prodserv/DSA815/ High resolution pictures are available upon request. I am looking for a price of USD1,195 and the shipping costs from Hong Kong to major cities are to my account. If you are interested, please contact me off-the-list at vr2xmc at yahoo dot com dot hk 73 Johnny VR2XMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 external battery (Maxtron) VERY NOISY
On Fri,3/6/2015 12:43 AM, Dominic Baines wrote: Yeah it is an oxy moron sometimes... operate off grid using a battery and you get noise (this will be the internal LiION battery recharging/regulation circuitry causing it). Probably so. Have you tried adding ferrite to the DC leads (and weirdly to the headset leads, I need to if using ext battery sometimes). You could make up a simple choke and plug your rig power lead into that, doesn't need to be in a box or anything... leads from battery then 12 turns of the power leads or so in opposite directions in parallel on the ferrite (try FT240-61) to a set of connections to the rig. #61 is a VERY poor choice for suppressing noise at HF. #31 and #43 are the weapons of choice for the HF bands. Or a string of those little 5mm ID clip on ferrites (ebay) on the Elecraft lead. Strings of beads or clip-ons are NOT effective at HF. Study k9yc.com/RFI-Ham.pdf 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Useful P3 feature
Wouldn't that need to be dampened a lot. What happens if there is QRN, you wouldn't want to be pushing the real stuff down. It would NOT be a simple function, and there would be wide variation on what seemed slick. 73, Guy On Fri, Mar 6, 2015 at 10:16 AM, Joe Subich, W4TV li...@subich.com wrote: I don't want to save the REF LVL. I want to save its relationship to the noise level. I agree. Put another way, I'd like to see a reverse baseline clamp - something along the line of holding REF LVL 5 dB below the average noise level. 73, ... Joe, W4TV On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: Here is something I would like to see on the P3. The P3 saves the REF LVL setting per band. But of course the noise level on a given band varies as conditions change, and I find myself often adjusting the REF LVL. The optimum setting is with the REF LVL just below the noise level. Setting it higher loses detail, and setting it lower fills the waterfall with noise. What I would like would be to adjust the REF LVL to optimum with respect to the noise level and then save this relationship. Then I would like to be able to push a function button to automatically adjust the REF LVL to re-establish the same relationship. This would make the readjustment, which I find myself making every few minutes sometimes, much quicker and easier. I don't want to save the REF LVL. I want to save its relationship to the noise level. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k2av@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Useful P3 feature
I don't want it to try to maintain the level automatically. I want to be able to recall the saved offset with a function button push. That way it is up to me if I want to reset it. On 6 Mar 2015 18:16, Guy Olinger K2AV wrote: Wouldn't that need to be dampened a lot. What happens if there is QRN, you wouldn't want to be pushing the real stuff down. It would NOT be a simple function, and there would be wide variation on what seemed slick. 73, Guy On Fri, Mar 6, 2015 at 10:16 AM, Joe Subich, W4TV li...@subich.com wrote: I don't want to save the REF LVL. I want to save its relationship to the noise level. I agree. Put another way, I'd like to see a reverse baseline clamp - something along the line of holding REF LVL 5 dB below the average noise level. 73, ... Joe, W4TV On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: Here is something I would like to see on the P3. The P3 saves the REF LVL setting per band. But of course the noise level on a given band varies as conditions change, and I find myself often adjusting the REF LVL. The optimum setting is with the REF LVL just below the noise level. Setting it higher loses detail, and setting it lower fills the waterfall with noise. What I would like would be to adjust the REF LVL to optimum with respect to the noise level and then save this relationship. Then I would like to be able to push a function button to automatically adjust the REF LVL to re-establish the same relationship. This would make the readjustment, which I find myself making every few minutes sometimes, much quicker and easier. I don't want to save the REF LVL. I want to save its relationship to the noise level. -- 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 ATU
The ATU mode is stored per-antenna. So you can bypass the ATU for ANT1 and have the ATU in-line for ANT2, or vice-versa. 73, Wayne N6KR On Mar 6, 2015, at 7:45 AM, Gary Gregory vk1zzg...@gmail.com wrote: I wonder if any thought has been given to allow for running the KAT3 on Antenna 1, but have it bypassed on Antenna 2? For me at least, it would allow me to use the KAT3 on antenna 2 and Antenna 1 could stay bypassed and the KAT500 allow me to use 3 antennas on the k3, antenna 1. At the moment i have to manually switch the KAT3 between ON and Bypass. User selectable of course for those who wish to leave it as it is. Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Useful P3 feature
Well, what I was thinking was that you could activate the option and adjust the REF LVL with the knob to whatever offset from the noise level that you wanted, and then save that 'offset'. On 6 Mar 2015 17:16, Joe Subich, W4TV wrote: I don't want to save the REF LVL. I want to save its relationship to the noise level. I agree. Put another way, I'd like to see a reverse baseline clamp - something along the line of holding REF LVL 5 dB below the average noise level. 73, ... Joe, W4TV On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: Here is something I would like to see on the P3. The P3 saves the REF LVL setting per band. But of course the noise level on a given band varies as conditions change, and I find myself often adjusting the REF LVL. The optimum setting is with the REF LVL just below the noise level. Setting it higher loses detail, and setting it lower fills the waterfall with noise. What I would like would be to adjust the REF LVL to optimum with respect to the noise level and then save this relationship. Then I would like to be able to push a function button to automatically adjust the REF LVL to re-establish the same relationship. This would make the readjustment, which I find myself making every few minutes sometimes, much quicker and easier. I don't want to save the REF LVL. I want to save its relationship to the noise level. -- 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 ATU
I wonder if any thought has been given to allow for running the KAT3 on Antenna 1, but have it bypassed on Antenna 2? For me at least, it would allow me to use the KAT3 on antenna 2 and Antenna 1 could stay bypassed and the KAT500 allow me to use 3 antennas on the k3, antenna 1. At the moment i have to manually switch the KAT3 between ON and Bypass. User selectable of course for those who wish to leave it as it is. Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Useful P3 feature
On 2015-03-06 11:16 AM, Guy Olinger K2AV wrote: Wouldn't that need to be dampened a lot. Yes, it would need to be a long-term average. However, I don't see that as particularly more difficult than any other type of AGC particularly given the level of computing power in the P3. 73, ... Joe, W4TV On 2015-03-06 11:16 AM, Guy Olinger K2AV wrote: Wouldn't that need to be dampened a lot. What happens if there is QRN, you wouldn't want to be pushing the real stuff down. It would NOT be a simple function, and there would be wide variation on what seemed slick. 73, Guy On Fri, Mar 6, 2015 at 10:16 AM, Joe Subich, W4TV li...@subich.com wrote: I don't want to save the REF LVL. I want to save its relationship to the noise level. I agree. Put another way, I'd like to see a reverse baseline clamp - something along the line of holding REF LVL 5 dB below the average noise level. 73, ... Joe, W4TV On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: Here is something I would like to see on the P3. The P3 saves the REF LVL setting per band. But of course the noise level on a given band varies as conditions change, and I find myself often adjusting the REF LVL. The optimum setting is with the REF LVL just below the noise level. Setting it higher loses detail, and setting it lower fills the waterfall with noise. What I would like would be to adjust the REF LVL to optimum with respect to the noise level and then save this relationship. Then I would like to be able to push a function button to automatically adjust the REF LVL to re-establish the same relationship. This would make the readjustment, which I find myself making every few minutes sometimes, much quicker and easier. I don't want to save the REF LVL. I want to save its relationship to the noise level. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k2av@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] New release of Win4K3Suite
Hello, Win4K3Suite version 1.742 has now been released. New in this release is per band IQ balance adjustments and a number of enhancements to the ClubLog window, and split functionality. Win4K3Suite is a comprehensive control program for the Elecraft K3, P3 with SVGA, KPA500 and KAT500. It also supports the KX3 with the KXPA100 and KAT500. It includes support for the P3 using a hardware video capture board as well as LPPAN. The Win4K3Suite spectrum scope is a full featured panadapter.that offers many features and performance not found in competing packages. You can see Win4K3Suite in action here: https://www.youtube.com/results?search_query=win4k3suite Win4K3 interfaces with all third party programs such as HRD Logbook and DM780, DXLabs, Log4OM, FLDIGI, N1MM and many more. For more information please check out the Win4K3Suite website. See us at Dayton booth NH0189 73's Tom va2fsq.com --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Order status query goes unanswered
Thread closed. In the future, if you have problem like this, please immediately give us a call. We'll certainly help you right out. I wasn't aware the automated reply said to email sales3 - While we do read that daily, we'll see if we can correct that to sa...@elecraft.com Lastly, Guys - it is in violation of list guidelines to -personally- criticize other's postings with negative, overly critical or snide remarks. Keep it polite. If you have a problem with a posting, please email the moderator. (me) . Do not privately -or- publicly chastize the poster. Doing so is rude and risks being removed from the list. If you can't keep it polite, don't send the email. 73, Eric moderator, co-owner and the buck-stops-here guy.. elecraft.com On 3/4/2015 1:28 PM, David Cole wrote: Too bad, everyone knows what happened, everyone knows how Elecraft handled it, everyone knows what will happen, and everyone knows Elecraft will do good to make this right... Everything beyond that is just drama... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-1 4-band Availability/Status?
I was interested in building a K-1 4-band, but learned the 4-band boards are unavailable. Can someone confirm or deny? Also, there was a VFO drift issue in the first K-1's I'd read about. I was curious if this issue was resolved or still exists. Thanks, Jay W6CJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
Jay, Yes, the KFL1-4 is no longer available. Take a look at the K1 specifications to be certain the frequency stability is sufficient for your needs. Yes, there is some drift as is common in any analog VFO (and the K1 uses an analog VFO). The frequency determining capacitors are either polystyrene or NP0 disc ceramics which have good (but not perfect) temperature stability. If the VFO inductor is carefully wound with the turns tight to the core and it is properly secured, the K1 VFO frequency stability will be better than specifications. I have dealt with 2 or 3 K1s with drift outside the spec limits, and they were 'cured' by properly winding the inductor and/or replacing the poly capacitors. Most of the K1s that I repair have frequency stability well within the specs. 73, Don W3FPR On 3/6/2015 4:25 PM, J wrote: I was interested in building a K-1 4-band, but learned the 4-band boards are unavailable. Can someone confirm or deny? Also, there was a VFO drift issue in the first K-1's I'd read about. I was curious if this issue was resolved or still exists. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
Confirm. Something related to a vital part(s?) no longer being available. 73, Phil W7OX On 3/6/15 1:25 PM, J wrote: I was interested in building a K-1 4-band, but learned the 4-band boards are unavailable. Can someone confirm or deny? Also, there was a VFO drift issue in the first K-1's I'd read about. I was curious if this issue was resolved or still exists. Thanks, Jay W6CJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
Hi all, The KFL1-4 module needs trimmers that are both wide range and extremely temperature stable, due to the high loaded Q of the band-pass filters. To emulate this stable capacitance with trimmers now available, you'd have to use a hand-selected C0G cap in parallel with a much smaller trimmer for each of the original 16 trimmers. This would be extremely tedious for builders. So, while it is possible, it is not practical. Wayne N6KR http://www.elecraft.com On Mar 6, 2015, at 8:33 PM, Don Wilhelm w3...@embarqmail.com wrote: The part number for the bare KFL1-4 board is E100129 as listed in the KFL1-4 manual. I do not know whether Elecraft has any boards in stock, but one could ask. Good luck with your project(s). You would also need the firmware E610010 as well as the other parts such as relays, connectors, crystals etc. If you downloaded the KFL1-4 manual before it was removed, you are 'in luck'. 73, Don W3FPR On 3/6/2015 10:03 PM, Dr. William J. Schmidt, II wrote: There is probably some middle ground here to satisfy most people in this situation. It's completely understandable and correct that Elecraft would not want to spend the effort to re-engineer this board. However some of us on channel don't see the task as rocket science and in most cases would be glad to provide that expertise as a side effort just to make that equipment useful. If Elecraft had even something as simple as unpopulated boards to purchase for use as prototypes, it would make that task quite simple. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch - K9ZC Staunton, Illinois Owner - Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: www.VillaGrandPiton.com email: b...@wjschmidt.com -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Friday, March 06, 2015 8:05 PM To: Ross Primrose; Phil Wheeler; elecraft@mailman.qth.net Subject: Re: [Elecraft] K-1 4-band Availability/Status? Ross, That vital part is the availability of the 1 to 40pF trimmer capacitors - which also had a very tight temperature compensation characteristic. The KFL1-4 used 16 of them. Due to their wide capacity range, the same capacitors could be used in all 16 positions and provide successful tuning. Those capacitors have been discontinued by the manufacturer. The problem is that there are no substitutes that could be used for all 16 positions, and it would take a great deal of engineering effort to determine the suitable substitutes for each position on the 4 band board. In other words, would a 3 to 15pf trimmer be suitable in the C1 thru C4 locations and would a 12 to 30pF trimmer be suitable in the C5 thru C8 locations and so forth. Furthermore, if the 17 meter band were chosen instead of the 15 meter band, which low range trimmer capacitors would be used for each band. I am speaking of examples for the engineering effort that would be required to select the best capacitor for each position and each band choice. It is not a trivial exercise. I certainly would not want to do experiments to select the appropriate replacement trimmers necessary to resurrect the 4 band board, and I am certain the engineering staff does not have the time to do that work. The documentation would get more complicated as well - for example, if you have chosen the 15 meter band, use the red trimmer capacitors at location Cx but if you have chosen 17 meters, use the yellow trimmers at those locations Hopefully you get the point of the complexity created by those wide range trimmer being no longer available. The values I have proposed above are only numbers off the top of my head for examples, they have no value in the real world. 73, Don W3FPR On 3/6/2015 6:46 PM, Ross Primrose wrote: Looking at the parts list, I can't imagine which part is no longer available 73, Ross N4RP On 3/6/2015 4:37 PM, Phil Wheeler wrote: Confirm. Something related to a vital part(s?) no longer being available. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to b...@wjschmidt.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w3...@embarqmail.com __ Elecraft mailing
Re: [Elecraft] K3 won't boot up unless POWER button held down
Huh! My power is always applied to the K3 power terminals, and no such problem. I'd try a reset, or reloading stored parameters from the K3 Utility. 73, Phil W7OX On 3/6/15 9:57 PM, peterc281 wrote: If I switch my power supply on then hit the POWER button 8 green lights come on but the screen is blank. If I hold the K3 POWER button down while I apply power when I let the K3 POWER button go the radio works OK?? What's the fix? Reset the rig? Peter VK3IJ -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-won-t-boot-up-unless-POWER-button-held-down-tp7599835.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@socal.rr.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-3 BCB DX setup advice request.
Tim, As you tune around the AM broadcast band you will want to keep in mind this excellent paper by Jack Smith, K8ZOA: http://www.cliftonlaboratories.com/peak_and_average_agc_and_am_mode.htm . The end result of these measurements is that you should disable the K3's AGC while listening to AM BC. It sounds so much better. Jack answered a nagging question I had had for years concerning why AM BC sounded so poor on ham receivers, and now I know why. Regards, Al W6LX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Hamfest in Tacoma, WA
Hi fellow hams Tomorrow (Sat 7 Mar) the Mike Key ARC is holding their annual hamfest at the Puyallup fair grounds. It is a swap meet with all types of items, not just ham gear. There are: computer stuff, general electronics, test equipment, tools, books, lighting equipment, and other miscellaneous items. The show is open to the public from 0900 to 1500. Hope to see you there Tom KG7CFC -- Forgiveness is really not about someone’s harmful behavior; it’s about our own relationship with our past. When we begin the work of forgiveness, it is primarily a practice for ourselves. - Gina Sharpe, “The Power of Forgiveness ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. Tom Taylor KG7CFC openSUSE 13.1 (64-bit), Kernel 3.11.6-4-default, KDE 4.11.2, AMD Phenom X4 955, GeForce GTX 550 Ti (Nvidia 337.19) 16GB RAM -- 3x1.5TB sata2 -- 128GB-SSD FF 27.0, claws-mail 3.10.0 registered linux user 263467 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 won't boot up unless POWER button held down
If I switch my power supply on then hit the POWER button 8 green lights come on but the screen is blank. If I hold the K3 POWER button down while I apply power when I let the K3 POWER button go the radio works OK?? What's the fix? Reset the rig? Peter VK3IJ -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-won-t-boot-up-unless-POWER-button-held-down-tp7599835.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 50W TX Gain Calibration Bug
Hi All, I just installed the 5.14 in my K3 and when I ran the 5 and 50 watt TX calibration I kept getting Calibration power settled at 3.495.72; and it would abort. It appears that during this calibration procedure VFO B is being used. When it got to 80 meters it would abort. My VFO B was set to 3495.72, which is out of band and being out of band I do not think the transmitter will transmit RF power. This caused the abort. Perhaps the Calibration software should set the VFOs in band before preforming the calibration. Once the VFO was set in band all is well. Best 73 Dave Anderson, K4SVTryon, NC 828 777-5088 WWW.K4SV.NET __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 50W TX Gain Calibration Bug
If that's a real problem, install 5.10, do the calibration then move on to 5.14. You only need to do the 50 W cal once, they say. Phil W7OX On 3/6/15 9:56 PM, Dave Anderson, K4SV via Elecraft wrote: Hi All, I just installed the 5.14 in my K3 and when I ran the 5 and 50 watt TX calibration I kept getting Calibration power settled at 3.495.72; and it would abort. It appears that during this calibration procedure VFO B is being used. When it got to 80 meters it would abort. My VFO B was set to 3495.72, which is out of band and being out of band I do not think the transmitter will transmit RF power. This caused the abort. Perhaps the Calibration software should set the VFOs in band before preforming the calibration. Once the VFO was set in band all is well. Best 73 Dave Anderson, K4SVTryon, NC 828 777-5088 WWW.K4SV.NET __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-1 4-band Availability/Status?
The part number for the bare KFL1-4 board is E100129 as listed in the KFL1-4 manual. I do not know whether Elecraft has any boards in stock, but one could ask. Good luck with your project(s). You would also need the firmware E610010 as well as the other parts such as relays, connectors, crystals etc. If you downloaded the KFL1-4 manual before it was removed, you are 'in luck'. 73, Don W3FPR On 3/6/2015 10:03 PM, Dr. William J. Schmidt, II wrote: There is probably some middle ground here to satisfy most people in this situation. It's completely understandable and correct that Elecraft would not want to spend the effort to re-engineer this board. However some of us on channel don't see the task as rocket science and in most cases would be glad to provide that expertise as a side effort just to make that equipment useful. If Elecraft had even something as simple as unpopulated boards to purchase for use as prototypes, it would make that task quite simple. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch - K9ZC Staunton, Illinois Owner - Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: www.VillaGrandPiton.com email: b...@wjschmidt.com -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Friday, March 06, 2015 8:05 PM To: Ross Primrose; Phil Wheeler; elecraft@mailman.qth.net Subject: Re: [Elecraft] K-1 4-band Availability/Status? Ross, That vital part is the availability of the 1 to 40pF trimmer capacitors - which also had a very tight temperature compensation characteristic. The KFL1-4 used 16 of them. Due to their wide capacity range, the same capacitors could be used in all 16 positions and provide successful tuning. Those capacitors have been discontinued by the manufacturer. The problem is that there are no substitutes that could be used for all 16 positions, and it would take a great deal of engineering effort to determine the suitable substitutes for each position on the 4 band board. In other words, would a 3 to 15pf trimmer be suitable in the C1 thru C4 locations and would a 12 to 30pF trimmer be suitable in the C5 thru C8 locations and so forth. Furthermore, if the 17 meter band were chosen instead of the 15 meter band, which low range trimmer capacitors would be used for each band. I am speaking of examples for the engineering effort that would be required to select the best capacitor for each position and each band choice. It is not a trivial exercise. I certainly would not want to do experiments to select the appropriate replacement trimmers necessary to resurrect the 4 band board, and I am certain the engineering staff does not have the time to do that work. The documentation would get more complicated as well - for example, if you have chosen the 15 meter band, use the red trimmer capacitors at location Cx but if you have chosen 17 meters, use the yellow trimmers at those locations Hopefully you get the point of the complexity created by those wide range trimmer being no longer available. The values I have proposed above are only numbers off the top of my head for examples, they have no value in the real world. 73, Don W3FPR On 3/6/2015 6:46 PM, Ross Primrose wrote: Looking at the parts list, I can't imagine which part is no longer available 73, Ross N4RP On 3/6/2015 4:37 PM, Phil Wheeler wrote: Confirm. Something related to a vital part(s?) no longer being available. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to b...@wjschmidt.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w3...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Back in time question
I'd also suggest an analogue volt meter, as they are generally better when adjusting for minimum and maximum voltages. And, although rather obvious, an antenna able to receive a transmission with good frequency accuracy. I used the Elecraft noise generator, a dummy load, a digital multimeter, Spectrogram, and a wire antenna. I subsequently obtained a 50kopv analogue meter and used it to refine some of the settings. Incidentally, I don't understand how the subject summarises the question. -- David Woolley Owner K2 06123 On 04/03/15 18:27, Don Wilhelm wrote: A dummy load and a DMM are sufficient - just follow the instructions in the manual. The K1 and the K2 both include provisions for reading the internal frequencies as well as other built-in tools. Of course there are other tools that can be helpful - Spectrogram is useful for providing a visual display of the filters, especially on the K2. Take a look at the K2 Dial Calibration article on my website On 3/4/2015 12:43 PM, Doug Hensley wrote: What test equipment is needed to accurately perform the alignment and proper tuning of a used K1 or K2 ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 external battery (Maxtron) VERY NOISY
Yeah it is an oxy moron sometimes... operate off grid using a battery and you get noise (this will be the internal LiION battery recharging/regulation circuitry causing it). Have you tried adding ferrite to the DC leads (and weirdly to the headset leads, I need to if using ext battery sometimes). You could make up a simple choke and plug your rig power lead into that, doesn't need to be in a box or anything... leads from battery then 12 turns of the power leads or so in opposite directions in parallel on the ferrite (try FT240-61) to a set of connections to the rig. Or a string of those little 5mm ID clip on ferrites (ebay) on the Elecraft lead. 72 Dom M1KTA Owner of #1082 #2334 On 06/03/15 04:53, Robert Sands wrote: A reflector poster mentioned the Maxtron MX 160A for use with the KX3. I got one off Amazon and tried it. My noise level jumped from S4 to S9.Not sure how to eliminate it.Nice otherwise.Transmit plug it in. Receive, pull it out. Robert E. Sands K7VO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft T1 miniature stand alone ATU for sale
Elecraft T1 miniature stand alone ATU for sale. From the SK estate I’m helping with. $115 shipped CONUS. Carl Yaffey K8NU Recording studio. cyaffeyno_s...@gmail.com 614 268 6353, Columbus OH http://www.carl-yaffey.com http://www.grassahol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com