Re: [Elecraft] CQ WPX and the KSYN3A board?
I was on only sporadically, wedding to attend on Sat and most of Sun was at granddaughter's softball tournament. It is however probably the best workout I've given the new synthesizer, and the improvements in QSK and CW stability are remarkable and obvious. I rarely noticed any phase noise with the old board, I didn't notice any with the new one. Phase noise on receive is not really my problem however, Casey's [neighbor] plasma TV is. Fortunately, he's had lots of problems with it, came over to see our Panasonic LCD, and is about to trash the plasma. :-) The CW was just super clean at 30-35 WPM which is about the max I use in contests [except when working D4C]. 73, Fred K6DGW - Northern California Contest Club - CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015 - www.cqp.org On 6/3/2015 4:17 PM, Mike Weir wrote: Good evening to the group, I was not able to participate last weekend in the CQ WPX CW contest but I was wondering from those of you who did and had the new KSYN3A synthesizer board in your K3's...how was the performance ? What did you notice compared to the old synthesizer board? Mike Weir VE3WDM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Pigknob and K2
Anyone have experience using the PigKnob with the K2? I'm thinking of using my K2 for SO2R, but the ergonomics are difficult - the PigKnob would fix that. I use one with my K3. Bill K6IFF -- View this message in context: http://elecraft.365791.n2.nabble.com/Pigknob-and-K2-tp7603701.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CQ WPX and the KSYN3A board?
I agree with Dwight's description of the new synthesizers in the K3. I also did a few hours in the WPX contest, where the QRM can get bad, but this time, no one could sneak up close to me to take over the QRG and I was able to log a little over 1000 QSO's. Loud signals certainly were less of a problem than before. I have also tested the high speed full QSK (up to 90 wpm) and it is working so much better. As Dwight says " Highly recommended up-grade! Thanks Elecraft!". 73, Tom - W4BQF -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of DGB Sent: Wednesday, June 3, 2015 8:30 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] CQ WPX and the KSYN3A board? I did participate, part time, but weathered thru about 1000 q's. Received both boards and installed about 3 hours before the contest. I was amazed how close qrm could be to a weak signal and not affect it at all. Noticeable difference from the old boards indeed! Plus the rig seems quieter as well, again great for the weaker signals. A long as the qrm wasn't on the exact same frequency, I was able to filter them out to hear the signal of interest! Nice having a qrm-less rig! Don't have any idea how it would do on ssb. I won't find out either, being primarily a cw and digital operator! Highly recommended up-grade! Thanks Elecraft! 73 Dwight NS9I On 6/3/2015 6:17 PM, Mike Weir wrote: > Good evening to the group, I was not able to participate last weekend in the CQ WPX CW contest but I was wondering from those of you who did and had the new KSYN3A synthesizer board in your K3's...how was the performance ? What did you notice compared to the old synthesizer board? > Mike Weir > VE3WDM > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > ns9i2...@bayland.net > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to alderm...@windstream.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CQ WPX and the KSYN3A board?
I did participate, part time, but weathered thru about 1000 q's. Received both boards and installed about 3 hours before the contest. I was amazed how close qrm could be to a weak signal and not affect it at all. Noticeable difference from the old boards indeed! Plus the rig seems quieter as well, again great for the weaker signals. A long as the qrm wasn't on the exact same frequency, I was able to filter them out to hear the signal of interest! Nice having a qrm-less rig! Don't have any idea how it would do on ssb. I won't find out either, being primarily a cw and digital operator! Highly recommended up-grade! Thanks Elecraft! 73 Dwight NS9I On 6/3/2015 6:17 PM, Mike Weir wrote: Good evening to the group, I was not able to participate last weekend in the CQ WPX CW contest but I was wondering from those of you who did and had the new KSYN3A synthesizer board in your K3's...how was the performance ? What did you notice compared to the old synthesizer board? Mike Weir VE3WDM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ns9i2...@bayland.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] CQ WPX and the KSYN3A board?
Good evening to the group, I was not able to participate last weekend in the CQ WPX CW contest but I was wondering from those of you who did and had the new KSYN3A synthesizer board in your K3's...how was the performance ? What did you notice compared to the old synthesizer board? Mike Weir VE3WDM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KXPD3 for sale
For sale is a KXPD3 keyer paddles that attach to the KX3. I ordered this about 6 weeks ago and just cannot give up my affection for my old Bencher Key. It is used very little and in perfect condition. It cost $130 and I am offering it for $110. I will pay shipping upon receipt and clearance of payment to any location in Continental USA by USPS with appropriate insurance. Contact me at jtcap...@me.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX1 For Sale
I have a KX1 for sale, it covers 40, 30, and 20 meters. Included accessories are the KXAT1 internal ATU and KXPD1 paddles. Priced at $400.00 shipped, I accept PayPal. Email me off list please at skipnc9o at Yahoo dot com. Skip Davis NC9O __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] XG-2 For Sale Sold
Hi all the XG-2 is sold. Skip NC9O __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Linux rig control
Hi Bill, I am personally not running a K3, but the Albany club is. We will have a K3 running with KB, a Linux based Contest logging program at field day this year (as always). Walt WA1KKM is adding K3 support this year. He has always suppoorted my rigs. There is also CQRLOG. This is a daily logging software that uses hamlib and also supports fldigi and etc. I do have a PC with all of this setup. I have not updated it in a bit. Since we are local, we should be able to get together and chat ;-) Will WC2L >>> Bill 6/3/2015 7:21 AM >>> I am looking for Linux software to control the K3. Currently I use an old version of HRD - which basically does what I want. HRD is a no go under Wine. I am totally uninterested in logging apps and similar - only desire rig control. At this point I am running Linux Mint 17 on one machine and Win 10 Preview on another. Win 10 is filled with features - as in bloatware - that I do not need nor want. However, there are a few programs that I run that are Windows only types and have no serious clones available for Linux. HRD is one of these. Any suggestions? My goal is to run only a single system - Linux or Windows. It makes it too fiddly to run two full systems. Dual boot and VMware solutions have been explored and dismissed. Rig control would go a long way toward making the change to Linux only. Thanks, Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@wc2l.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Linux rig control
Hi, If you have a copy of Windows, try "Virtual Box". -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net For MixW support see; http://groups.yahoo.com/neo/groups/mixw/info For Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info For MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Wed, 2015-06-03 at 09:05 -0700, Matt Zilmer wrote: > My mistake. Fldigi and Flarq are both running under Ubuntu directly. > The ppa that Kamal Mostafa runs has very stable Linux versions. > > I'm all hung up on getting wine to run M110A, and I'm stuck on that. > > Sorry for the confusion. > > 73, > matt > W6NIA > > On Wed, 03 Jun 2015 09:12:29 -0600, you wrote: > > >It would make a lot more sense to run fldigi directly under ubuntu > >rather adding in the complex layer of wine. > > > >flrig is a very simple rig control program - but it does work very well > >running on ubuntu variants and most other distros. > > > >73, Doug -- K0DXV > > > >On 6/3/15 7:46 AM, Matt Zilmer wrote: > >> This isn't a direct answer to your question, Bill. It does address > >> the Linux issue to some extent. > >> > >> I'm running Ubuntu 12.04 here and have Fldigi up and running under > >> Wine. I'm working on getting MSDMT going now. Tht is a software > >> modem / terminal program used for Army MARS message transfer on HF. > >> > >> With Fldigi, everything is working fine and it is as stable as Fldigi > >> gets. This setup runs using a Creative Labs EMU 0202. I have to run > >> the program via sudo because otherwise Fldigi can't get access to the > >> sound unit. > >> > >> M110A is set up differently (for the present), so I can't run it as > >> su. So the EMU sound unit isn't visible, though the COM port works > >> fine. I'm slowly working this out. > >> > >> For just plain old rig control, you might try DM780 by itself under > >> wine. it only requires a COM port to operate the K3. You have to set > >> up the COM port under the dos_devices folder withing ~/.wine, I > >> believe. There are different web pages describing the "how to" for > >> serial ports under wine. > >> > >> 73, > >> matt > >> W6NIA / AAR9CD > >> > >> On Wed, 03 Jun 2015 07:21:29 -0400, you wrote: > >> > >>> I am looking for Linux software to control the K3. Currently I use an > >>> old version of HRD - which basically does what I want. HRD is a no go > >>> under Wine. I am totally uninterested in logging apps and similar - only > >>> desire rig control. > >>> > >>> At this point I am running Linux Mint 17 on one machine and Win 10 > >>> Preview on another. Win 10 is filled with features - as in bloatware - > >>> that I do not need nor want. However, there are a few programs that I > >>> run that are Windows only types and have no serious clones available for > >>> Linux. HRD is one of these. > >>> > >>> Any suggestions? My goal is to run only a single system - Linux or > >>> Windows. It makes it too fiddly to run two full systems. Dual boot and > >>> VMware solutions have been explored and dismissed. Rig control would go > >>> a long way toward making the change to Linux only. > >>> > >>> Thanks, > >>> > >>> Bill W2BLC K-Line > >>> __ > >>> Elecraft mailing list > >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >>> Help: http://mailman.qth.net/mmfaq.htm > >>> Post: mailto:Elecraft@mailman.qth.net > >>> > >>> This list hosted by: http://www.qsl.net > >>> Please help support this email list: http://www.qsl.net/donate.html > >>> Message delivered to mzil...@roadrunner.com > >> Matt Zilmer, W6NIA > >> -- > >> "Always store beer in a dark place." -R. Heinlein > >> > >> __ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to k0...@aol.com > >> > > > >__ > >Elecraft mailing list > >Home: http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/mmfaq.htm > >Post: mailto:Elecraft@mailman.qth.net > > > >This list hosted by: http://www.qsl.net > >Please help support this email list: http://www.qsl.net/donate.html > >Message delivered to mzil...@roadrunner.com > Matt Zilmer, W6NIA > -- > "Always store beer in a dark place." -R. Heinlein > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to d...@nk7z.net __
Re: [Elecraft] K3 Linux rig control
My mistake. Fldigi and Flarq are both running under Ubuntu directly. The ppa that Kamal Mostafa runs has very stable Linux versions. I'm all hung up on getting wine to run M110A, and I'm stuck on that. Sorry for the confusion. 73, matt W6NIA On Wed, 03 Jun 2015 09:12:29 -0600, you wrote: >It would make a lot more sense to run fldigi directly under ubuntu >rather adding in the complex layer of wine. > >flrig is a very simple rig control program - but it does work very well >running on ubuntu variants and most other distros. > >73, Doug -- K0DXV > >On 6/3/15 7:46 AM, Matt Zilmer wrote: >> This isn't a direct answer to your question, Bill. It does address >> the Linux issue to some extent. >> >> I'm running Ubuntu 12.04 here and have Fldigi up and running under >> Wine. I'm working on getting MSDMT going now. Tht is a software >> modem / terminal program used for Army MARS message transfer on HF. >> >> With Fldigi, everything is working fine and it is as stable as Fldigi >> gets. This setup runs using a Creative Labs EMU 0202. I have to run >> the program via sudo because otherwise Fldigi can't get access to the >> sound unit. >> >> M110A is set up differently (for the present), so I can't run it as >> su. So the EMU sound unit isn't visible, though the COM port works >> fine. I'm slowly working this out. >> >> For just plain old rig control, you might try DM780 by itself under >> wine. it only requires a COM port to operate the K3. You have to set >> up the COM port under the dos_devices folder withing ~/.wine, I >> believe. There are different web pages describing the "how to" for >> serial ports under wine. >> >> 73, >> matt >> W6NIA / AAR9CD >> >> On Wed, 03 Jun 2015 07:21:29 -0400, you wrote: >> >>> I am looking for Linux software to control the K3. Currently I use an >>> old version of HRD - which basically does what I want. HRD is a no go >>> under Wine. I am totally uninterested in logging apps and similar - only >>> desire rig control. >>> >>> At this point I am running Linux Mint 17 on one machine and Win 10 >>> Preview on another. Win 10 is filled with features - as in bloatware - >>> that I do not need nor want. However, there are a few programs that I >>> run that are Windows only types and have no serious clones available for >>> Linux. HRD is one of these. >>> >>> Any suggestions? My goal is to run only a single system - Linux or >>> Windows. It makes it too fiddly to run two full systems. Dual boot and >>> VMware solutions have been explored and dismissed. Rig control would go >>> a long way toward making the change to Linux only. >>> >>> Thanks, >>> >>> Bill W2BLC K-Line >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to mzil...@roadrunner.com >> Matt Zilmer, W6NIA >> -- >> "Always store beer in a dark place." -R. Heinlein >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to k0...@aol.com >> > >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to mzil...@roadrunner.com Matt Zilmer, W6NIA -- "Always store beer in a dark place." -R. Heinlein __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Linux rig control
It would make a lot more sense to run fldigi directly under ubuntu rather adding in the complex layer of wine. flrig is a very simple rig control program - but it does work very well running on ubuntu variants and most other distros. 73, Doug -- K0DXV On 6/3/15 7:46 AM, Matt Zilmer wrote: This isn't a direct answer to your question, Bill. It does address the Linux issue to some extent. I'm running Ubuntu 12.04 here and have Fldigi up and running under Wine. I'm working on getting MSDMT going now. Tht is a software modem / terminal program used for Army MARS message transfer on HF. With Fldigi, everything is working fine and it is as stable as Fldigi gets. This setup runs using a Creative Labs EMU 0202. I have to run the program via sudo because otherwise Fldigi can't get access to the sound unit. M110A is set up differently (for the present), so I can't run it as su. So the EMU sound unit isn't visible, though the COM port works fine. I'm slowly working this out. For just plain old rig control, you might try DM780 by itself under wine. it only requires a COM port to operate the K3. You have to set up the COM port under the dos_devices folder withing ~/.wine, I believe. There are different web pages describing the "how to" for serial ports under wine. 73, matt W6NIA / AAR9CD On Wed, 03 Jun 2015 07:21:29 -0400, you wrote: I am looking for Linux software to control the K3. Currently I use an old version of HRD - which basically does what I want. HRD is a no go under Wine. I am totally uninterested in logging apps and similar - only desire rig control. At this point I am running Linux Mint 17 on one machine and Win 10 Preview on another. Win 10 is filled with features - as in bloatware - that I do not need nor want. However, there are a few programs that I run that are Windows only types and have no serious clones available for Linux. HRD is one of these. Any suggestions? My goal is to run only a single system - Linux or Windows. It makes it too fiddly to run two full systems. Dual boot and VMware solutions have been explored and dismissed. Rig control would go a long way toward making the change to Linux only. Thanks, Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mzil...@roadrunner.com Matt Zilmer, W6NIA -- "Always store beer in a dark place." -R. Heinlein __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k0...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] pse help k3/0 mini
Hi Hiroshi, Please check your spam filter. Elecraft Support replied to you on June 1st at 4:15 PM California time. Otherwise, please supply a different email address for us to use. Cheers, David/KG6IRW - David Shoaf K3/KX3 International Distributor and Customer Support +1-831-763-4211 x121 KG6IRW - -- View this message in context: http://elecraft.365791.n2.nabble.com/pse-help-k3-0-mini-tp7603687p7603690.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Auto OFF on battery only suggestion
Yes Peter, I did think of that possibility, in which case you just wouldn't use the option I proposed. Diving into the menus each time I change from external PSU to internal batteries gets old quite quickly, the less times I am in there the better as there is the danger of inadvertently changing something else by mistake by turning the VFO in a moment of confusion. I doubt anything will be done, but I thought it was worth asking. 73 David Anderson GM4JJJ > On 3 Jun 2015, at 03:09, Peter Lambert wrote: > > Consider the use of an external battery pack. Starts to get complicated. > Perhaps best the way it is and up to the operator to turn the feature on > when it's required. > > The menu system is very quick and easy to use with a little familiarity. > > 73's Peter VK4JD > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick > Tavan N6XI > Sent: Wednesday, 3 June 2015 12:01 PM > To: David Anderson > Cc: Elecraft Mailer > Subject: Re: [Elecraft] KX3 Auto OFF on battery only suggestion > > Good idea, David. I'd like that option, too. > > /Rick N6XI > >> On Fri, May 29, 2015 at 10:48 AM, David Anderson wrote: >> >> I wonder if the Auto OFF command could be enhanced so that it has an >> option so that it takes effect only if the KX3 is running from >> internal batteries? >> >> The only reason I set Auto OFF on is so that if I forget to turn it >> off while I have the rig on batteries it will switch off and not run them > down. >> I like to leave the rig on continuously when running from an external >> source for stability and frequently come back to find it has switched off. >> >> Thanks for your consideration. >> >> 73 >> >> David Anderson GM4JJJ >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this email >> list: http://www.qsl.net/donate.html Message delivered to >> rta...@gmail.com > > > > -- > Rick Tavan N6XI > Truckee, CA > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to plamb...@qa.com.au > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Linux rig control
This isn't a direct answer to your question, Bill. It does address the Linux issue to some extent. I'm running Ubuntu 12.04 here and have Fldigi up and running under Wine. I'm working on getting MSDMT going now. Tht is a software modem / terminal program used for Army MARS message transfer on HF. With Fldigi, everything is working fine and it is as stable as Fldigi gets. This setup runs using a Creative Labs EMU 0202. I have to run the program via sudo because otherwise Fldigi can't get access to the sound unit. M110A is set up differently (for the present), so I can't run it as su. So the EMU sound unit isn't visible, though the COM port works fine. I'm slowly working this out. For just plain old rig control, you might try DM780 by itself under wine. it only requires a COM port to operate the K3. You have to set up the COM port under the dos_devices folder withing ~/.wine, I believe. There are different web pages describing the "how to" for serial ports under wine. 73, matt W6NIA / AAR9CD On Wed, 03 Jun 2015 07:21:29 -0400, you wrote: >I am looking for Linux software to control the K3. Currently I use an >old version of HRD - which basically does what I want. HRD is a no go >under Wine. I am totally uninterested in logging apps and similar - only >desire rig control. > >At this point I am running Linux Mint 17 on one machine and Win 10 >Preview on another. Win 10 is filled with features - as in bloatware - >that I do not need nor want. However, there are a few programs that I >run that are Windows only types and have no serious clones available for >Linux. HRD is one of these. > >Any suggestions? My goal is to run only a single system - Linux or >Windows. It makes it too fiddly to run two full systems. Dual boot and >VMware solutions have been explored and dismissed. Rig control would go >a long way toward making the change to Linux only. > >Thanks, > >Bill W2BLC K-Line >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to mzil...@roadrunner.com Matt Zilmer, W6NIA -- "Always store beer in a dark place." -R. Heinlein __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] pse help k3/0 mini
I received K3/0 mini a few days ago from elecraft US. But I have a problem. I think VFO B knob is not working. (VFO_B is unlocked) I cannot change VFO B frequency and set menu entries using VFO B knob. I sent emails to k3supp...@elecraft.com but no reply. This is my first Elecraft. I'm not familiar with K3. Please help me. Hiroshi (Tokyo, Japan) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Linux rig control
I use the fldigi suite of software on my Ubuntu distro. It does most everything you need for ham radio work. Sound Card digimodes modem, logging and rig controll. Add on programs lets you do arq, radiograms. It can function as an modem for other 3d party software. And supports kiss. Might do what you want. 73 Erlend La4tta. 3. juni 2015 13:21 skrev "Bill" følgende: > I am looking for Linux software to control the K3. Currently I use an old > version of HRD - which basically does what I want. HRD is a no go under > Wine. I am totally uninterested in logging apps and similar - only desire > rig control. > > At this point I am running Linux Mint 17 on one machine and Win 10 Preview > on another. Win 10 is filled with features - as in bloatware - that I do > not need nor want. However, there are a few programs that I run that are > Windows only types and have no serious clones available for Linux. HRD is > one of these. > > Any suggestions? My goal is to run only a single system - Linux or > Windows. It makes it too fiddly to run two full systems. Dual boot and > VMware solutions have been explored and dismissed. Rig control would go a > long way toward making the change to Linux only. > > Thanks, > > Bill W2BLC K-Line > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to egrims...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] EEPROM Problem?
Joseph, If you want to store the current frequency without waiting, do a band change and then change back - the K2 will write the frequency to EEPROM on the band change. 73, Don W3FPR On 6/3/2015 12:52 AM, Joseph Baxley via Elecraft wrote: Matt, I believe what you said is correct. I was borrowing space in an electronics lab tonight and was working quickly during the final install because others were needing the space. I have since tried waiting (it took me about a minute on frequency) and it is writing to EEPROM correctly. I had never noticed this behavior before and was deeply puzzled. Thank you for the answer. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Linux rig control
I am looking for Linux software to control the K3. Currently I use an old version of HRD - which basically does what I want. HRD is a no go under Wine. I am totally uninterested in logging apps and similar - only desire rig control. At this point I am running Linux Mint 17 on one machine and Win 10 Preview on another. Win 10 is filled with features - as in bloatware - that I do not need nor want. However, there are a few programs that I run that are Windows only types and have no serious clones available for Linux. HRD is one of these. Any suggestions? My goal is to run only a single system - Linux or Windows. It makes it too fiddly to run two full systems. Dual boot and VMware solutions have been explored and dismissed. Rig control would go a long way toward making the change to Linux only. Thanks, Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com