Re: [Elecraft] P3 tx Monitor on VGA?
Really. The TXMON on SVGA? Sent from my iPhone ...nr4c. bill > On Aug 8, 2016, at 6:18 PM, lmarion wrote: > > Yes there is cake. Install the SVGA option. It displays on my 27 inch > display beautifully. > > Leroy AB7CE > > -Original Message- From: David F. Reed > Sent: Monday, August 08, 2016 3:06 PM > To: elecraft Reflector > Subject: [Elecraft] P3 tx Monitor on VGA? > > I suspect this has been asked before, but I don't recall the answer... > > I note that I really enjoy the TX monitor aspects of my P3; however I > miss it on the external VGA display. > > Is there any way to set things to get both on the external monitor? > > If not currently, is it on a to do list? > > Just wanting my cake and getting to eat it too... > > > 73 de Dave, W5SV > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to lmar...@mt.net > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Heath kit and the Lazarus Loop
I seem to remember a 2 meter mobile that got recalled and shredded per FCC direction not long before the company closed down. Dick, n0ce Ohm sweet Ohm On 8/8/2016 2:47 PM, Dauer, Edward wrote: I remembered Heathkit as having first been an airframe manufacturer which got into electronics after the War. I just checked the history, one version of which can be found here: http://www.heathkit.nu/heathkit_nu_HeathStory.html. Apparently the company was sold to Daystrom as early as 1955. Zenith bought it in 1979, after the company had diversified far afield from the electronics kit market. My first TX was a DX-20, which I built in 1957. I remember later kits coming out into at least the middle 70s. My last one was an HW-101, more or less 1973, and there were several years of good kits after that. So it lasted at least that long under Daystrom, a substantial corporation by that time. It may be that Heath’s demise came less from a lack of entrepreneurship than from a lack of focus on the market where it had mastered its route to success. The introduction of personal computers at around the same time probably played a role as well. It would be interesting to know whether any of the MBAs on the list know of a Heath Inc. B-school case. The “Lazarus Loop” may be well named – apparently the company had cycled through bankruptcy more than once even in its early days. The site noted above tells the tale. R.I.P. Ted, KN1CBR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] T1 not tuning - Thanks everyone for your help!
Video has been removed because there is no more problem. Elecraft is taking care of tuner under the warranty. 73, Steve KI4EZL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KIO3 boards wanted--redux
I asked for help with my K3 to computer connection on this reflector, and then asked for a used set of KIO3 boards. John, KH7T, was nice enough to send me his old set of KIO3 boards for free. I replaced my boards, and, while I was at it, looked at the original set for fried chokes (they taste best when fried), because, Keith, WE6R, an Elecraft tech, suggested that these might be the problem. The result is that I still have the problem, but did not get to enjoy fried chokes. To recap: 1. Following a power surge, my K3 continued to operate, but no longer spoke or listened to the computer to which it was connected. 2. I bought a new serial-to-USB converter from Elecraft, and tried it with the K3, using my main computer and a also an older Acer netbook. 3. I checked to see if the USB ports were bad, but other devices work in the same ports. 4. I then replaced the KIO3 boards with the new ones and repeated the check. Nothing has made a difference. I test by trying to connect with the Elecraft K3 utility that has worked before. My next step will be to contact Elecraft and send the radio to them, meaning a *minimum* service charge of $100, plus parts, plus insured shipping both ways, unless someone on this reflector has deeper ears than I have and can pull something else out of them. Thanks to all for their help and offers of replacement boards. 73, Jan, KX2A __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 tx Monitor on VGA?
Me too!!! For sure!!! __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 8/8/2016 4:22 PM, Ronnie Hull wrote: > I too would like to see this! > > Ronnie W5SUM > > Sent from my iPhone > >> On Aug 8, 2016, at 4:06 PM, David F. Reed wrote: >> >> I suspect this has been asked before, but I don't recall the answer... >> >> I note that I really enjoy the TX monitor aspects of my P3; however I miss >> it on the external VGA display. >> >> Is there any way to set things to get both on the external monitor? >> >> If not currently, is it on a to do list? >> >> Just wanting my cake and getting to eat it too... >> >> >> 73 de Dave, W5SV >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w5...@comcast.net > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to caut...@montac.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Dang... tough crowd... Thought we were supposed to be "helpful" here. Perhaps you (or one of the other guys) could have explained greylisting and other options rather than getting all crotchety... I'm out... TO THE OP: IF you see this, feel free to email me directly. I will discuss your options for combating SPAM, up to and including providing you with a free email account on one of my servers. Y'all have a great evening! 73, __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 8/8/2016 1:55 PM, Joe Subich, W4TV wrote: > > > How could he anticipate that YOU personally would respond... :-) > > That's not the point. When you post a general request for help (e.g., > to a mail list), don't be blocking replies *or* expect someone trying > to help you to go take *extra steps* to respond to an e-mail challenge. > > If I get one of those challenges, it automatically goes into my spam > bucket and the person who has asked for help loses out - period. So > too does anyone who has an e-mail provider that blocks my ISP. > > 73, > >... Joe, W4TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K3] Can K144XV output be limited ot 5 watts?
I have a small 2 meter amp (RFC 2-23) that has a 5 watt max input rating. Is there a way to lower the K3 output from the normal 10 watts down to just 5 watts out? Thanks 73 ..mike AI6II -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Can-K144XV-output-be-limited-ot-5-watts-tp7621403.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 tx Monitor on VGA?
Leroy, I suspect you misread my post; my P3 with SVGA & TX monitor options displays the receive spectrum just fine; it does not display the TX Monitor info on either RX or TX. According to Elecraft it doesn't do that, and they didn't disclose if they have plans to do that. If somehow you have the TX monitor functions displaying on your monitor (not just on the P3), please share how you did it; I am sure a lot of us would like to know... Thanks & 73 de Dave, W5SV On 8/8/16 17:18, lmarion wrote: Yes there is cake. Install the SVGA option. It displays on my 27 inch display beautifully. Leroy AB7CE -Original Message- From: David F. Reed Sent: Monday, August 08, 2016 3:06 PM To: elecraft Reflector Subject: [Elecraft] P3 tx Monitor on VGA? I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor aspects of my P3; however I miss it on the external VGA display. Is there any way to set things to get both on the external monitor? If not currently, is it on a to do list? Just wanting my cake and getting to eat it too... 73 de Dave, W5SV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: Piglet
Howdy Gang: Want to try out my iPad and KX3 on PSK/RTTY/CW using a Piglet. Does anyone have one for sale? Many thanks. 73, Joe W2KJ I QRP, therefore I am __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 tx Monitor on VGA?
Yes there is cake. Install the SVGA option. It displays on my 27 inch display beautifully. Leroy AB7CE -Original Message- From: David F. Reed Sent: Monday, August 08, 2016 3:06 PM To: elecraft Reflector Subject: [Elecraft] P3 tx Monitor on VGA? I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor aspects of my P3; however I miss it on the external VGA display. Is there any way to set things to get both on the external monitor? If not currently, is it on a to do list? Just wanting my cake and getting to eat it too... 73 de Dave, W5SV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to lmar...@mt.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: My Heathkit post
We're at 17 postings today on the OT Heathkit topic - exceeding the normal OT limit. In the interest of relieving email overload for the majority of our readers, the thread is now closed. 73, Eric Moderator /elecraft.com/ On 8/8/2016 12:51 PM, Ken G Kopp wrote: Folks, I'm just the messenger ... only wanted to share the info that Heathkit appears to have returned. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 tx Monitor on VGA?
Hi David, Not at this time. 73, Eric /elecraft.com/ On 8/8/2016 2:06 PM, David F. Reed wrote: I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor aspects of my P3; however I miss it on the external VGA display. Is there any way to set things to get both on the external monitor? If not currently, is it on a to do list? Just wanting my cake and getting to eat it too... 73 de Dave, W5SV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric.swa...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Folks - This way OT topic was closed over 2 hours ago. Please, no more posts on the email/Spam filtering topic. 73, Eric Moderator /elecraft.com/ On 8/8/2016 2:12 PM, Lynn W. Taylor, WB6UUT wrote: Speaking as someone who provided E-Mail services for a couple of decades, NO. It's not the provider's fault. It's the customer who insists that his E-Mail address appear in a web page. It's the person who forwards jokes and cc's everyone (not bcc, cc) and never removes the earlier lists. ... and it's your friends, who can't resist opening that trojan horse -- the first thing the trojan does is read their address book and publish it. My oldest active address is more that two decades old. It's not the provider's fault, a good provider will try to guide you away from things that will generate more spam. 73 -- Lynn On 8/8/2016 10:14 AM, Clay Autery wrote: Not my preference either, but sometimes, if your email provider makes a mistake or doesn't take proper precautions, you can end up getting THOUSANDS of SPAM emails a day... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric.swa...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: LP-Pan 2 kit, partially built
For Sale one LP-Pan 2 kit, partially built by me (got to the first power-up test and stopped) SN 1727 for the K3. In original box. $125 shipped CONUS. Thanks, Julius n2wn - Julius Fazekas N2WN Tennessee Contest Group http://www.k4ro.net/tcg/index.html Tennessee QSO Party http://www.tnqp.org/ Elecraft K2#4455 Elecraft K3/100 #366 Elecraft K3/100 -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-LP-Pan-2-kit-partially-built-tp7621395.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Off-list email reduces postings for everyone. :-) 73, Ed W0YK On Aug 8, 2016 12:51 PM, Bill wrote: > > Personally, I do not like off-list responses - unless they are > solicited. If responses are made on list, we all get to learn. Off list > responses do not help the rest of us at all. > > Bill W2BLC K-Line > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to e...@w0yk.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: QRP K2 plus options
I have for sale one K2 QRP CW rig. 160 through 10. Includes K160X, KNB2, KAF2, KIO2, KAT2 and KBT2 with a new battery (about 2 months old). Plus more. I built and used this radio. Specifically it was for 160M CW and contesting, it excelled. Asking $795 shipped CONUS. Serial #4455 all mods done. Thanks for looking. 72, Julius n2wn - Julius Fazekas N2WN Tennessee Contest Group http://www.k4ro.net/tcg/index.html Tennessee QSO Party http://www.tnqp.org/ Elecraft K2#4455 Elecraft K3/100 #366 Elecraft K3/100 -- View this message in context: http://elecraft.365791.n2.nabble.com/FS-QRP-K2-plus-options-tp7621394.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 tx Monitor on VGA?
I too would like to see this! Ronnie W5SUM Sent from my iPhone > On Aug 8, 2016, at 4:06 PM, David F. Reed wrote: > > I suspect this has been asked before, but I don't recall the answer... > > I note that I really enjoy the TX monitor aspects of my P3; however I miss it > on the external VGA display. > > Is there any way to set things to get both on the external monitor? > > If not currently, is it on a to do list? > > Just wanting my cake and getting to eat it too... > > > 73 de Dave, W5SV > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w5...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Speaking as someone who provided E-Mail services for a couple of decades, NO. It's not the provider's fault. It's the customer who insists that his E-Mail address appear in a web page. It's the person who forwards jokes and cc's everyone (not bcc, cc) and never removes the earlier lists. ... and it's your friends, who can't resist opening that trojan horse -- the first thing the trojan does is read their address book and publish it. My oldest active address is more that two decades old. It's not the provider's fault, a good provider will try to guide you away from things that will generate more spam. 73 -- Lynn On 8/8/2016 10:14 AM, Clay Autery wrote: Not my preference either, but sometimes, if your email provider makes a mistake or doesn't take proper precautions, you can end up getting THOUSANDS of SPAM emails a day... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 tx Monitor on VGA?
I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor aspects of my P3; however I miss it on the external VGA display. Is there any way to set things to get both on the external monitor? If not currently, is it on a to do list? Just wanting my cake and getting to eat it too... 73 de Dave, W5SV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] T1 as stopped tuning correctly.
Thanks Don. The antenna that I am using is the UltiMax 100 End Fed antenna with a 33' wire which all came from the factory as is. It has been a super antenna, worked lots of state side and DX with it and the MTR 5b radio tuning with the T1. I just spent a week with it up in the Smokes. It was hung off a 31' Jakite fiberglass extendable pole mounted up on the rear ladder of my motorhome, about 35' in the air. Thanks for helping, I appreciate it. I heard from Gary at tech support, moments ago, and he had me test some things. He thinks that there are a couple diodes gone, and offered to fix it if I send it in. I also just ordered a second T1 to use when I break one of the tuners. I have big stuff, but don't care to use them with my little qrp radios. Thanks again for your help. I have very recently purchase several little kits from Elecraft, to learn how to build and fix on. I also want to try building a very basic kit radio, then a K1. I have all the recommended tools, the adjustable Weller solder station, magnification lens and light, proper solder, etc... Hopefully, I will soon have the skill to handle this type of small repair job on my toys. I have a very nice K2 that is loaded, several little elecraft kits, and want to build a K1 soon. I am also saving up for a new factory built K3s. Take care Don, Thanks again, Steve KI4EZL > On Aug 8, 2016, at 3:51 PM, Don Wilhelm [via Elecraft] > wrote: > > Steve, > > That 33 foot wire may be what is giving you problems. It is a half wave > on 20 meter and present an impedance greater than the T1 can tune. > I quote from the T1 manual: > "Avoid lengths close to a multiple of 1/2-wavelength on any band you plan to > use. If you use an end-fed wire with no feedline and/or a poor ground, > you may need to reduce power to avoid RFI problems with the transceiver, > tuner, nearby computers, portable phones, etc." > > I suggest you try a different length, or at least add a short > counterpoise wire. If you are using it on 40 meters, you definitely > need a counterpoise wire of about 33 feet. > > 73, > Don W3FPR > > On 8/8/2016 2:56 PM, Steve-KI4EZL wrote: > > > Thanks Don. > > > > In the video I posted on youtube, the blinking yellow is actually the self > > test sending code for each value. > > > > The green light was blinking when in first step of tune mode, then touch > > paddle to start 2nd step of tune mode. Normally it moves around trying > > different tunings and latches on to the best one. Now, it just has steady > > tone, steady green light, flickering yellow a tiny bit, but does not try > > different tunings and does not latch, and does not finish the tuning, like > > it use to. I ran the self test and the blinking yellow light showed the > > following results. > > > > S=1R0,SWR > > V=8R9,BATTERY VOLTAGE > > L=0, INDUCTANCE > > C=0, CAPACITANCE > > N=t, NETWORK CONFIG > > B=0, BAND ID > > F=1R07 FIRMWARE REVISION > > > > Tested following with neg dmm lead on neg bat tab. No battery in device > > tested. Red DMM lead on parts ends, one at a time: > > D1: 122/0 > > D2: 122/0 > > R3: 120 / 117 > > R4: 120 / 117 > > R5: 118 / 0 > > R6: 118 / 0 > > > > Then, testing with both pos & neg DMM lead tips on each end of parts, then > > swapping neg for pos & vice versa, > > D1: 122 / 79 > > D2: 122 / 79 > > > >> On Aug 8, 2016, at 1:43 PM, Don Wilhelm > >> S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07 > > > > > > > > > > -- > > View this message in context: > > http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358p7621374.html > > Sent from the Elecraft mailing list archive at Nabble.com. > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [hidden email] > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > > > If you reply to this email, your message will be added to the discussion > below: > http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358p7621386.html > To unsubscribe from T1 as stopped tuning correctly., click here. > NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358p7621390.html Sent from the Elecraft mailing
Re: [Elecraft] ATTN: K6CTW
I don't mind them, but it is getting out of hand. Seriously. I can't wait till the the election starts. I think Elecraft needs 2 reflectors. The broad ranging one, and the very product specific one. I'm on 15 different reflectors. This one and 1 other are all over the place. The rest of very specific and they control it. my 2 cents On Mon, Aug 8, 2016 at 3:51 PM, Bill wrote: > Personally, I do not like off-list responses - unless they are solicited. > If responses are made on list, we all get to learn. Off list responses do > not help the rest of us at all. > > Bill W2BLC K-Line > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to va...@portcredit.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] OT: My Heathkit post
Folks, I'm just the messenger ... only wanted to share the info that Heathkit appears to have returned. Our bedroom clock (Walmart?) tracks 60 KHz WWVB, choice of times, follows DST changes, etc. Cost less than $50. 73 K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Personally, I do not like off-list responses - unless they are solicited. If responses are made on list, we all get to learn. Off list responses do not help the rest of us at all. Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] T1 as stopped tuning correctly.
Steve, That 33 foot wire may be what is giving you problems. It is a half wave on 20 meter and present an impedance greater than the T1 can tune. I quote from the T1 manual: "Avoid lengths close to a multiple of 1/2-wavelength on any band you plan to use. If you use an end-fed wire with no feedline and/or a poor ground, you may need to reduce power to avoid RFI problems with the transceiver, tuner, nearby computers, portable phones, etc." I suggest you try a different length, or at least add a short counterpoise wire. If you are using it on 40 meters, you definitely need a counterpoise wire of about 33 feet. 73, Don W3FPR On 8/8/2016 2:56 PM, Steve-KI4EZL wrote: Thanks Don. In the video I posted on youtube, the blinking yellow is actually the self test sending code for each value. The green light was blinking when in first step of tune mode, then touch paddle to start 2nd step of tune mode. Normally it moves around trying different tunings and latches on to the best one. Now, it just has steady tone, steady green light, flickering yellow a tiny bit, but does not try different tunings and does not latch, and does not finish the tuning, like it use to. I ran the self test and the blinking yellow light showed the following results. S=1R0,SWR V=8R9,BATTERY VOLTAGE L=0, INDUCTANCE C=0, CAPACITANCE N=t, NETWORK CONFIG B=0, BAND ID F=1R07 FIRMWARE REVISION Tested following with neg dmm lead on neg bat tab. No battery in device tested. Red DMM lead on parts ends, one at a time: D1: 122/0 D2: 122/0 R3: 120 / 117 R4: 120 / 117 R5: 118 / 0 R6: 118 / 0 Then, testing with both pos & neg DMM lead tips on each end of parts, then swapping neg for pos & vice versa, D1: 122 / 79 D2: 122 / 79 On Aug 8, 2016, at 1:43 PM, Don Wilhelm S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07 -- View this message in context: http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358p7621374.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Heath kit and the Lazarus Loop
I remembered Heathkit as having first been an airframe manufacturer which got into electronics after the War. I just checked the history, one version of which can be found here: http://www.heathkit.nu/heathkit_nu_HeathStory.html. Apparently the company was sold to Daystrom as early as 1955. Zenith bought it in 1979, after the company had diversified far afield from the electronics kit market. My first TX was a DX-20, which I built in 1957. I remember later kits coming out into at least the middle 70s. My last one was an HW-101, more or less 1973, and there were several years of good kits after that. So it lasted at least that long under Daystrom, a substantial corporation by that time. It may be that Heath’s demise came less from a lack of entrepreneurship than from a lack of focus on the market where it had mastered its route to success. The introduction of personal computers at around the same time probably played a role as well. It would be interesting to know whether any of the MBAs on the list know of a Heath Inc. B-school case. The “Lazarus Loop” may be well named – apparently the company had cycled through bankruptcy more than once even in its early days. The site noted above tells the tale. R.I.P. Ted, KN1CBR -- Message: 30 Date: Mon, 8 Aug 2016 12:01:37 -0700 (MST) From: ab2tc To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Not so OT: The Heathkit clocks are back! Message-ID: <1470682897444-7621377.p...@n2.nabble.com> Content-Type: text/plain; charset=us-ascii Hi, I share the feelings of most of the most recent posters. I have no idea who is behind the new P.O. box in Santa Cruz which according to Wikipedia was established in October 2015. I wish them luck, crossing my fingers, but not holding much hope for their success. Now, to the OT: part. Elecraft is living proof that the demise of Heathkit didn't have to be an inevitable thing. Heathkit died, not only because technology changed but more so by serious corporate mismanagement. Once the original company was sold to Zenith, the writing was on the wall. Had entrepreneurial folks, that were probably very similar in talent to Eric and Wayne remained in control, Heathkit could have survived to this day. I am one of the old-timers who remembers the heyday of Heathkit and considers its demise nothing short of a national tragedy (yes, we built Heathkits in Norway, too). AB2TC - Knut __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Ken and All, But $100? Not much of a bargain. If you want to monitor local plus UTC they suggest you buy two of them! Dave W7AQK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KFL3A-6K-IR Filter
I have just installed a new 6K AM filter in my K3s. I configured the filter by computer, and checked using CONFIG . Band width was 6k Hz, offset 0. When I turn the band width knob I only get a spread of 5k. Any suggestion would help. The filter was put in slot 1. Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Was OK and fun back in the day but it is all junk now and their product line looks pathetic. Leroy AB7CE -Original Message- From: Ken G Kopp Sent: Monday, August 08, 2016 10:03 AM To: elecraft@mailman.qth.net Subject: [Elecraft] OT: The Heathkit clocks are back! Likely of interest to many of us. www.heathkit.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Not so OT: The Heathkit clocks are back!
I was looking online for mods to the Heath IG-18. It looks as though a fellow in California has taken on the Heath mantle. Below are a couple of links, one a mod to the IG-18, the second a more direct Heath link: https://shop.heathkit.com/shop/product/thd-improvement-kit-for-ig-18-series- audio-generators-meter-buffer-board-only-4 http://d8apro.com/ Mike W5FTD > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > ab2tc > Sent: Monday, August 08, 2016 2:02 PM > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Not so OT: The Heathkit clocks are back! > > Hi, > > I share the feelings of most of the most recent posters. I have no idea > who is behind the new P.O. box in Santa Cruz which according to > Wikipedia was established in October 2015. I wish them luck, crossing my > fingers, but not holding much hope for their success. > > Now, to the OT: part. Elecraft is living proof that the demise of > Heathkit didn't have to be an inevitable thing. Heathkit died, not only > because technology changed but more so by serious corporate > mismanagement. Once the original company was sold to Zenith, the writing > was on the wall. Had entrepreneurial folks, that were probably very > similar in talent to Eric and Wayne remained in control, Heathkit could > have survived to this day. I am one of the old-timers who remembers the > heyday of Heathkit and considers its demise nothing short of a national > tragedy (yes, we built Heathkits in Norway, too). > > AB2TC - Knut > > PS. My spelling checker doesn't recognize "Heathkit". Sigh. > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
To clarify, I'm referring to the thread complaining about the anti-spam system used by the original requester, not his original post, which was OK. Eric /elecraft.com/ On 8/8/2016 12:10 PM, Eric Swartz - WA6HHQ, Elecraft wrote: Folks - Way too OT. Please take this off list. In general, this is something that should have gone to direct email immediately and not tied up the list with email.. Thread closed. 73, Eric Moderator /elecraft.com/ On 8/8/2016 11:55 AM, Joe Subich, W4TV wrote: > How could he anticipate that YOU personally would respond... :-) That's not the point. When you post a general request for help (e.g., to a mail list), don't be blocking replies *or* expect someone trying to help you to go take *extra steps* to respond to an e-mail challenge. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric.swa...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
On Mon, 2016-08-08 at 18:53 +, Mark E. Musick wrote: > It is real. > Sometime back, I think it was here on the reflector, someone had > bought their little AM radio kit and said it was a very good kit and > they enjoyed building it. The assembly manual was up to the expected > Heathkit quality. > > Mark, WB9CIF As much as I liked Heathkit stuff, this looks like a 4.00 dollar clock module in a 90.00 dollar box, and a 5.00 dollar power supply. It isn't even WWVB, or GPS locked. Sorry to be so negative about it, but the new Heathkit is going to have to do very much better than a 99.00 dollar clock to stay in business over the next five years. Construction would be fun, but really-- a $99.00 non lockable digital clock? I fear for the new Heathkit... -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Folks - Way too OT. Please take this off list. In general, this is something that should have gone to direct email immediately and not tied up the list with email.. Thread closed. 73, Eric Moderator /elecraft.com/ On 8/8/2016 11:55 AM, Joe Subich, W4TV wrote: > How could he anticipate that YOU personally would respond... :-) That's not the point. When you post a general request for help (e.g., to a mail list), don't be blocking replies *or* expect someone trying to help you to go take *extra steps* to respond to an e-mail challenge. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Not so OT: The Heathkit clocks are back!
Hi, I share the feelings of most of the most recent posters. I have no idea who is behind the new P.O. box in Santa Cruz which according to Wikipedia was established in October 2015. I wish them luck, crossing my fingers, but not holding much hope for their success. Now, to the OT: part. Elecraft is living proof that the demise of Heathkit didn't have to be an inevitable thing. Heathkit died, not only because technology changed but more so by serious corporate mismanagement. Once the original company was sold to Zenith, the writing was on the wall. Had entrepreneurial folks, that were probably very similar in talent to Eric and Wayne remained in control, Heathkit could have survived to this day. I am one of the old-timers who remembers the heyday of Heathkit and considers its demise nothing short of a national tragedy (yes, we built Heathkits in Norway, too). AB2TC - Knut PS. My spelling checker doesn't recognize "Heathkit". Sigh. Richard Fjeld-2 wrote > Lazarus loop; I love it. > > Dick, n0ce > > > On 8/8/2016 1:12 PM, John Pitz wrote: >> Unfortunately Heathkit seems to be stuck in some sort ofLazarus loop. > > -- > -- View this message in context: http://elecraft.365791.n2.nabble.com/OT-The-Heathkit-clocks-are-back-tp7621355p7621377.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] T1 as stopped tuning correctly.
Thanks Don. In the video I posted on youtube, the blinking yellow is actually the self test sending code for each value. The green light was blinking when in first step of tune mode, then touch paddle to start 2nd step of tune mode. Normally it moves around trying different tunings and latches on to the best one. Now, it just has steady tone, steady green light, flickering yellow a tiny bit, but does not try different tunings and does not latch, and does not finish the tuning, like it use to. I ran the self test and the blinking yellow light showed the following results. S=1R0,SWR V=8R9,BATTERY VOLTAGE L=0, INDUCTANCE C=0, CAPACITANCE N=t, NETWORK CONFIG B=0, BAND ID F=1R07 FIRMWARE REVISION Tested following with neg dmm lead on neg bat tab. No battery in device tested. Red DMM lead on parts ends, one at a time: D1: 122/0 D2: 122/0 R3: 120 / 117 R4: 120 / 117 R5: 118 / 0 R6: 118 / 0 Then, testing with both pos & neg DMM lead tips on each end of parts, then swapping neg for pos & vice versa, D1: 122 / 79 D2: 122 / 79 > On Aug 8, 2016, at 1:43 PM, Don Wilhelm > S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07 -- View this message in context: http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358p7621374.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
> How could he anticipate that YOU personally would respond... :-) That's not the point. When you post a general request for help (e.g., to a mail list), don't be blocking replies *or* expect someone trying to help you to go take *extra steps* to respond to an e-mail challenge. If I get one of those challenges, it automatically goes into my spam bucket and the person who has asked for help loses out - period. So too does anyone who has an e-mail provider that blocks my ISP. 73, ... Joe, W4TV On 8/8/2016 1:12 PM, Clay Autery wrote: He ain't picking on you He's obviously got a serious problem with SPAM and has implemented this server initiated process. The message is sent to EVERYONE who sends an email to that address who is NOT on the "WHITELIST". Once you are on the Whitelist, you won't get the message anymore. How could he anticipate that YOU personally would respond... :-) __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 8/8/2016 10:40 AM, Ken G Kopp wrote: Why did you ask a question if you were going to block / refuse replies? ? ? ! K0PP On Aug 8, 2016 9:30 AM, wrote: on __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
On Mon, 2016-08-08 at 13:34 -0400, Marc Veeneman via Elecraft wrote: > But greylist is more effective and less like a slap in the face to > your friends. He, and others making the same blunder, should seek > alternatives. Greylist is wonderful and works really, really well... -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
It is real. Sometime back, I think it was here on the reflector, someone had bought their little AM radio kit and said it was a very good kit and they enjoyed building it. The assembly manual was up to the expected Heathkit quality. Mark, WB9CIF -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of EricJ Sent: Monday, August 8, 2016 5:59 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] OT: The Heathkit clocks are back! Given that we've heard "Heathkit has risen" [BentonHarbor 28:6] monthly for the last 40 years, I'd want to hear from someone who actually ordered and received something before I sent any money. I''m not implying anything dishonest at all, but vaporware is vaporware. In the mean time, I wish them all the luck in the world. My first rig was a DX-35 for my 15th birthday. It was sad to see them fall on hard times. Eric KE6US ex-KN1DCK On 8/8/2016 9:03 AM, Ken G Kopp wrote: > Likely of interest to many of us. > > www.heathkit.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > eric_c...@hotmail.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@sbcglobal.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Lazarus loop; I love it. Dick, n0ce On 8/8/2016 1:12 PM, John Pitz wrote: Unfortunately Heathkit seems to be stuck in some sort ofLazarus loop. -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
And it will not replace my two GC1000, "Most Accurate Clock", Heathkit's. 73, Bob K2TK On 8/8/2016 1:11 PM, David Gilbert wrote: Hardly. $100 for a clock? $150 for a tuned RF AM receiver? Those prices are high by an order of magnitude, and that's being generous. On 8/8/2016 9:03 AM, Ken G Kopp wrote: Likely of interest to many of us. www.heathkit.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@ptd.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Paint for EC-2 Enclosure
I posted the same question a few days ago for an EC2 clone that I built. Most suggested I have an Elecraft panel scanned to order custom paint. That sort of flew in the face of building an EC2 clone to save money. I could have bought one for what it cost to order custom paint and apply it. However, I had painted it with Krylon CoverMax 51318 gray ultra flat primer. Once it has thoroughly dried, you can buff it with a clean cloth to give it a slight satin look that's closer to the Elecraft finish and texture. It's not a close color match, but with the EC2 in amongst my two K2's and another factory painted EC2, the color difference doesn't show all that much in average hamshack lighting. Some day, I'd like to find a rattle can that is closer, but in the mean time, it looks decent and works fine. In the photos here, the side panels are primer, but the top panel is an original factory-painted panel. Obviously, the front panel is unprimered. Worth a try in a pinch until we can find a better match. https://flic.kr/p/KBivtc Eric KE6US On 8/8/2016 6:47 AM, Ken Miller K6CTW wrote: All I have an EC-2 that is getting ready to be built into a power-supply, speaker et. for my K2. When the holes for the meters, speakers, switches, etc. are milled out in the front and back panels, there will undoubtedly be areas where the paint is removed that needs to be touched up. Where can I get pain that would match the color/texture of the existing pain on that enclosure? Thoughts and/or information from other's experience much appreciated. Thanks in advance. 73 - Ken Miller, K6CTW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric_c...@hotmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Unfortunately Heathkit seems to be stuck in some sort of Lazarus loop. I just hope that a Chinese company isn't using such a venerable name to give credibility to sell more poorly made electronic goods. On Mon, 2016-08-08 at 10:59 -0700, EricJ wrote: > Given that we've heard "Heathkit has risen" [BentonHarbor 28:6] monthly > for the last 40 years, I'd want to hear from someone who actually > ordered and received something before I sent any money. I''m not > implying anything dishonest at all, but vaporware is vaporware. > > In the mean time, I wish them all the luck in the world. My first rig > was a DX-35 for my 15th birthday. It was sad to see them fall on hard times. > > Eric KE6US > > ex-KN1DCK > > > On 8/8/2016 9:03 AM, Ken G Kopp wrote: > > Likely of interest to many of us. > > > > www.heathkit.com > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to eric_c...@hotmail.com > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to crustac...@brig-elec.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Given that we've heard "Heathkit has risen" [BentonHarbor 28:6] monthly for the last 40 years, I'd want to hear from someone who actually ordered and received something before I sent any money. I''m not implying anything dishonest at all, but vaporware is vaporware. In the mean time, I wish them all the luck in the world. My first rig was a DX-35 for my 15th birthday. It was sad to see them fall on hard times. Eric KE6US ex-KN1DCK On 8/8/2016 9:03 AM, Ken G Kopp wrote: Likely of interest to many of us. www.heathkit.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric_c...@hotmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] T1 as stopped tuning correctly.
Steve, The blinking yellow LED as well as the Self Test results seem to indicate that the T1 is in BYPASS mode. Tap the BYP/INFO button to alternate between ATU inline (green LED on). 73, Don W3FPR On 8/8/2016 12:44 PM, Steve-KI4EZL wrote: Hello, My T1 tuner quit working. It is about 5 weeks old. I have video taped the attempt to tune and the self test, and posted it on YouTube. I hope this will help with the diagnosis. Here is that link - https://youtu.be/jprcv6q_HFQ Station is a 33' EF wire antenna, t1 tuner, LNR MTR 5b QRP radio, Begali traveller light iambic key. Radio runs on AA batteries, 10-11 volts. It has always worked well before, but now does not tune. Self test results: S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07. Please advise. Thank you, Steve KI4EZL -- View this message in context: http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Paint for EC-2 Enclosure
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
But greylist is more effective and less like a slap in the face to your friends. He, and others making the same blunder, should seek alternatives. -- Marc W8SDG > On Aug 8, 2016, at 1:14 PM, Clay Autery wrote: > > Not my preference either, but sometimes, if your email provider makes a > mistake or doesn't take proper precautions, you can end up getting > THOUSANDS of SPAM emails a day... > > Been there... > > Give the guy a break, please. > > > 73, > > __ > Clay Autery, KY5G > MONTAC Enterprises > (318) 518-1389 > >> On 8/8/2016 10:57 AM, Don Wilhelm wrote: >> I was going to respond, but based on the experience below, I will >> decline. >> IMHO, this is a horrid way to operate email. >> >> 73, >> Don W3FPR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mveene...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Ken: My GC-1005 that I built as a teenager in 1973 as my first Heathkit experience is still serving as my bedside clock having served continuously for over 43 years. That said, I could use another clock or two for other applications. Looks like a fun kit to build! While the pricing as a ‘clock’ maybe high, the “intrinsic value” (nostalgia and fun of building) probably makes it worthwhile to me. Thanks for the heads up. 73, Barry Baines, WD4ASW Westborough, MA > On Aug 8, 2016, at 12:03 PM, Ken G Kopp wrote: > > Likely of interest to many of us. > > www.heathkit.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to bbai...@mac.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Not my preference either, but sometimes, if your email provider makes a mistake or doesn't take proper precautions, you can end up getting THOUSANDS of SPAM emails a day... Been there... Give the guy a break, please. 73, __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 8/8/2016 10:57 AM, Don Wilhelm wrote: > I was going to respond, but based on the experience below, I will > decline. > IMHO, this is a horrid way to operate email. > > 73, > Don W3FPR > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: The Heathkit clocks are back!
Hardly. $100 for a clock? $150 for a tuned RF AM receiver? Those prices are high by an order of magnitude, and that's being generous. On 8/8/2016 9:03 AM, Ken G Kopp wrote: Likely of interest to many of us. www.heathkit.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
He ain't picking on you He's obviously got a serious problem with SPAM and has implemented this server initiated process. The message is sent to EVERYONE who sends an email to that address who is NOT on the "WHITELIST". Once you are on the Whitelist, you won't get the message anymore. How could he anticipate that YOU personally would respond... :-) __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 8/8/2016 10:40 AM, Ken G Kopp wrote: > Why did you ask a question if you were going to block / refuse replies? ? ? > ! > > K0PP > > On Aug 8, 2016 9:30 AM, wrote: > on > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3: Eneloop Pro AA vs. Eneloop 21 AA cells
I've had 8 Eneloop Pro 2400 mAh cells in my KX3 for about 3 years now. There have probably been only about 30 charge/discharge cycles on them, since I most often use an external LiFePO4 pack when I can. Just recently I've begun to experience KX3 shutdown when trying to transmit at 5 watts or more into a well matched load - including a dummy load. At the 3 watt level, the built-in voltmeter has shown a full 2 volt drop with a 1.2 amp load: from 10.8 in receive to 8.8. This is fresh off a full charge, and even though the cells still show about a 2400 mAh capacity with a refresh cycle in an external battery charger/analyzer. Replacing the Eneloop Pro cells with standard 2100 mAh Eneloops of approximately the same age I don't have the problem. The 1.2 amp voltage drop is 0.9 V and not much more when I transmit at 10 watts. I had run across other's experiences with these cells that noted an increased internal resistance compared to the standard Eneloops, and my experience seems to confirm this. At the least it seems the Eneloop Pro cells haven't aged as well as the standard Eneloops. I thought this experience might help other KX3 owners. 73 Chip AE5KA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
Ken and Don, I think you got this response because you responded direct to the sender rather than to the Elecraft reflector. Or perhaps you copied his direct email on a response to the reflector. I also use a required response spam filter system that catches most automated junk, but it only requires that you click on a link in the email you receive from that system. I've used it since my website host first offered it nearly 20 years ago. 73, Jim K9YC On Mon,8/8/2016 8:40 AM, Ken G Kopp wrote: Why did you ask a question if you were going to block / refuse replies? ? ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] T1 as stopped tuning correctly.
Hello, My T1 tuner quit working. It is about 5 weeks old. I have video taped the attempt to tune and the self test, and posted it on YouTube. I hope this will help with the diagnosis. Here is that link - https://youtu.be/jprcv6q_HFQ Station is a 33' EF wire antenna, t1 tuner, LNR MTR 5b QRP radio, Begali traveller light iambic key. Radio runs on AA batteries, 10-11 volts. It has always worked well before, but now does not tune. Self test results: S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07. Please advise. Thank you, Steve KI4EZL -- View this message in context: http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3, KXPA100 and KX Utility Software
Frank, I think you will be happier using the soundcard route. The KX3 Utility will PSK-D, FSK-D or CW. If you already have the capability to download firmware to the KX3/KXPA100 or to save the configuration, etc using KX3 Utility, you are all set - just go to the Terminal tab, then tune the KX3 to the station of interest (and set the proper data submode - or CW) and it should be decoded. Type in the transmit window and it should be transmitted. If you want the conventional waterfall display and point to the signal and click to tune it, use the soundcard and select DATA A for all but RTTY where you will want to use AFSK A. 73, Don W3FPR On 8/8/2016 12:04 PM, f12...@gmail.com wrote: Because I can't seem to figure out how to search the list to find an answer to my question, I am posting this question. How does one configure (cable) a KX3, KXPA100 and a computer to use the Elecraft KX3 Utility software for data modes? Or, must I have to go the sound card route and use a different program for digital modes? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3, KXPA100 and KX Utility Software
Because I can't seem to figure out how to search the list to find an answer to my question, I am posting this question. How does one configure (cable) a KX3, KXPA100 and a computer to use the Elecraft KX3 Utility software for data modes? Or, must I have to go the sound card route and use a different program for digital modes? Thanks, Frank, W2FAL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] OT: The Heathkit clocks are back!
Likely of interest to many of us. www.heathkit.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] ATTN: K6CTW
I was going to respond, but based on the experience below, I will decline. IMHO, this is a horrid way to operate email. 73, Don W3FPR On 8/8/2016 11:40 AM, Ken G Kopp wrote: Why did you ask a question if you were going to block / refuse replies? ? ? ! K0PP On Aug 8, 2016 9:30 AM, wrote: I apologize for this automatic reply to your email. To control spam, I now allow incoming messages only from senders I have approved beforehand. If you would like to be added to my list of approved senders, please fill out the short request form (see link below). Once I approve you, I will receive your original message in my inbox. You do not need to resend your message. I apologize for this one-time inconvenience. Click the link below to fill out the request: https://webmail.pas.earthlink.net/wam/addme?a=k6ctw@ earthlink.net&id=11e6-5d7c-d43f34c8-b884-00144fe245fa __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] ATTN: K6CTW
Why did you ask a question if you were going to block / refuse replies? ? ? ! K0PP On Aug 8, 2016 9:30 AM, wrote: > I apologize for this automatic reply to your email. > > To control spam, I now allow incoming messages only from senders I have > approved beforehand. > > If you would like to be added to my list of approved senders, please fill > out the short request form (see link below). Once I approve you, I will > receive your original message in my inbox. You do not need to resend your > message. I apologize for this one-time inconvenience. > > Click the link below to fill out the request: > > https://webmail.pas.earthlink.net/wam/addme?a=k6ctw@ > earthlink.net&id=11e6-5d7c-d43f34c8-b884-00144fe245fa > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [OT] Antenna Question
How stiff is the 20 meter vertical? I take an 8 inch long piece of 1.5in pvc and make a stand off at the base and the top for the vertical. Then run a wire from the 20 meter feed point to the top of the 20 meter vertical giving you 17feet...then out another 17 feet and you will have an inverted L. Otherwise you can put a 20 meter trap at the top and put a 17 feet piece of wire out with no stand offs and do the same thing. Although, if you use the parallel feed, you can use the 40 meter wire (inverted L) on 15 meters easily with no tuner. Just put down a few wires on the ground and let the grass grow over them You may need to add a counter traction on the vertical with an insulated rope to keep the vertical from bowing in the direction of the 40 meter L. It should work really nicely for you. I know that this works because I use a 40 meter vertical that I have rigged to work 160 through 10. Vy 73, Morgan NJ8M On Sun, Aug 7, 2016 at 10:42 AM, Don Wilhelm wrote: > Clipping a 17 foot wire to the top may be easier than adding an inductor. > Add at least one 33 foot counterpoise wire - or extend one of the 20 meter > counterpoise wires with another clip-on 17 foot wire. > > 73, > Don W3FPR > > > On 8/7/2016 11:32 AM, j...@kk9a.com wrote: > >> That is a huge mismatch. Assuming that the portable 20m vertical is easily >> assessable I would just clip on an inductor at the base to make it >> resonant >> on 40m. If you have elevated radials you would have to put one there also >> or just lay the radials on the ground. >> >> John KK9A >> >> [Elecraft] [OT] Antenna Question >> >> rick jones n3ikq >> Sat Aug 6 22:58:39 EDT 2016 >> >> Ok sorry for not providing enough info! Consider this scenario: I have a >> portable vertical with 4 counterpoise wires that is resonant on 20. Lets >> say >> I want to tune the antenna up on 40. I can have a tuner right at the base >> of >> the antenna OR I can just use a balun at the base of the antenna and use >> the >> built in ATU in the K3. Is there a difference in how much power is getting >> to the antenna? I assume the tuner at the base is the best option which >> always makes me doubt the usefulness of having an ATU built in to a rig in >> terms of getting the most power to the antenna. Am I on the right track? >> Thanks! Rick >> >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mbaileyc...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Paint for EC-2 Enclosure
All I have an EC-2 that is getting ready to be built into a power-supply, speaker et. for my K2. When the holes for the meters, speakers, switches, etc. are milled out in the front and back panels, there will undoubtedly be areas where the paint is removed that needs to be touched up. Where can I get pain that would match the color/texture of the existing pain on that enclosure? Thoughts and/or information from other's experience much appreciated. Thanks in advance. 73 - Ken Miller, K6CTW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] k3s radio kit
I have used egg cartons and ice cube trays as well as muffin pans and glass bowls. I usually can reach a finger into both the egg cartons and ice cube trays to slide a small part up the side without using tweezers. 73 Bill AE6JV On 8/5/16 at 8:03 PM, donw...@embarqmail.com (Don Wilhelm) wrote: Those who lack that skill may need to sort the hardware into separate muffin tins or other containers with marker tags as a reminder of the size in the compartment. Actually, I hate those muffin tins or plastic box compartments because I cannot just reach in with my fingers and pull out a component - pliers or tweezers are needed to extract a screw or other component from those containers. --- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and | 16345 Englewood Ave www.pwpconsult.com | vegetables without stickers. | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA500 Band Tracking
Hi Edward I am buying into this thread somewhat late. However, I did not see a particular suggestion which has previously caused me similar problems. Have you, inadvertently or otherwise, changed the "radio" setting in the KPA500 menu? It should be set as K3. If it isn't, you will get some strange effects. I also had a problem when the K3 to KPA500 suffered a broken conductor. So it could be either. The new leads from Elecraft are much better and more flexible than the ones originally available when the KPA500 first came out. 73 Barry VK2BJ On 8 August 2016 at 10:21, Dauer, Edward wrote: > I appreciate your having written, Cliff; and it is the case that 30 meters > is an oddball. Just as the K3 is booby-trapped to prevent transmitting out > of band, it could very well have been that adding 30 meters to the working > bands would have required some special consideration to keep the amp from > violating the power limitations. > > Thanks again, > > Ted, KN1CBR > > > On 8/7/16, 6:10 PM, "Cliff Frescura" wrote: > > I think I jumped the gun and was wrong. > > 73, > > Cliff K3LL/6 > > > > > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to vk...@optusnet.com.au > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com