[Elecraft] Elecraft CW Net Report
Good Evening, Twenty meters was less noisy than forty. QSB was deeper on the latter too. Surprisingly everyone on 20 meters reported mild temperatures while on forty meters only two ops reported cooler temperatures. One was hiding from tourists on a hillside near the Pacific. The other was enjoying a respite from the heat and rain of the Plains. I get moisture each morning when the dense fog comes in from the ocean and hits the trees. They condense and precipitate it on the house. Each tree can mine its own water for the day. On 14050.5 kHz at 2200z: NO8V - John - Mi W0CZ - Ken - ND K6XK - Roy - IA K0DTJ - Brian - CA On 7047.5 kHz at z: WM5F - Dwight - ID K0DTJ - Brian - CA W0CZ - Ken - ND K6PJV - Dale - CA The sun may send us more ions this week but I do know the thunderstorms will keep producing noise. That's just the nature of summer. Blackberries are about two weeks out, maybe I'll get to see the bear again. 73, Kevin. KD5ONS _ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 center frequency
I have an additional problem, which is that sometimes this happens when I use the band up and band down buttons on the rig. I have not been able to understand why it only happens sometimes and not always. I have a macro set up in the Commander module of the DXLabs program that I use for logging, which checks what band I'm on and then resets the limits and center as I want them, but it's still annoying. Incidentally, for those who might be confused by the whole issue, it applies to using the P3 in FIXED, not tracking, mode. 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ On 22/07/2019 3:04, Fred Jensen wrote: Not sure who I'm talking to here, no signature, no call. It's a little hard to explain but ... Assume you set SPAN=100 KHz and put the left edge at the bottom of each band. Changing bands back and forth using the BAND ^/v switch will preserve these settings, and every time you come back to a previous band, they will appear ... so long as you don't touch any of the P3 controls. However, using CAT commands [e.g. from a logger], you can change to a new band and the settings will hold, however returning to the previous band, the SPAN will still be 100 KHz but the center frequency will have moved and the left edge will no longer be at the bottom of the band. Admittedly, it's a bit hard to duplicate but the circumstances that cause it are common in contesting and it has been duplicated by several folk, including me. The issue has been raised here on the list more than once. I think it first came up several years ago, which could be 1 or 6, even Apollo 11 seems like yesterday to me these days. [:-) It has some of the earmarks of an intentional attempt to "do something good" in the firmware which turned out to be not so good, but I really don't know. For whatever the reason, I expect it to come back to the settings it had when I left that band. As Randy said, it is really annoying. I, and I think most, use the P3 visually instead of looking at the K3. If I set the left edge at the bottom of the band and the SPAN at 100 KHz, I automatically visualize the 1st 100 KHz directly from the screen. If it's changed as a result of band changes, my mental picture of that band segment is wrong. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 4:20 PM, Tom wrote: Hi, What exactly do you mean? It is always set to whatever you send. If you explain this a little more perhaps I can help. 73 -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Randy Farmer Sent: July 21, 2019 2:44 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 center frequency It's been brought up several times in the last two or three years. No response from the P3 software guys. It's EXTREMELY annoying that the P3 won't respect the center frequency setting if the radio is tuned via any CAT command. I've given up on hoping it will ever be fixed. My guess is that it's all hands and the cooks working on K4 software these days. 73... Randy, W8FN On 7/21/2019 12:45 PM, Fred Jensen wrote: Jim: In general, yes, if you change bands with BAND ^/v. When you change bands via the CAT, the P3 center freq won't always end up where you last had it. I believe SPAN width is preserved but the span limits show up strange. It's a known issue, has been discussed at some length here a few months ago. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 10:31 AM, Jim N7US wrote: Should the P3 center frequency and span be remembered when changing bands? Rephrasing, can they be remembered when changing bands? Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to elecraft.l...@videotron.ca --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k6...@foothill.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k2vco@gmail.com __ Elecraft mailing list
Re: [Elecraft] Feature Request: Shifting VFO
KPOD macros could stitch together 50 kHz with of UPn;UPn; or DNn or use direct frequency entry with FA for the bottom of the phone and CW band segments for a few bands. What I do in contests is type a frequency into the callsign input area of N1MM; the hands stay on the keyboard. I also sometimes slowly tune the radio with up and down keyboard keys when I’m using a computer. When in an assisted contest, you can jump to the next spot you haven’t worked in the bandmap with a single keystroke. I don’t always use a computer for operating, but when I care about the time it takes is usually in a contest when I’m using a computer logger. 73 de Dick, K6KR > On Jul 21, 2019, at 17:27, Walter Underwood wrote: > > There is a similar computer feature called “mouse acceleration”. It has been > around for at least 20 years and people still haven’t agreed on whether it is > a good or bad thing. > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) > >> On Jul 21, 2019, at 7:50 AM, Ignacy wrote: >> >> Is it a feature of ICOMs? >> Neat as QSY to a far away frequency can be done without pressing any extra >> button. >> On the other hand, band-segment memories and clicking on spots makes >> long-range QSYing less important. >> Ignacy, NO9E >> >> >> >> -- >> Sent from: http://elecraft.365791.n2.nabble.com/ >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to wun...@wunderwood.org > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to d...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Feature Request: Shifting VFO
There is a similar computer feature called “mouse acceleration”. It has been around for at least 20 years and people still haven’t agreed on whether it is a good or bad thing. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Jul 21, 2019, at 7:50 AM, Ignacy wrote: > > Is it a feature of ICOMs? > Neat as QSY to a far away frequency can be done without pressing any extra > button. > On the other hand, band-segment memories and clicking on spots makes > long-range QSYing less important. > Ignacy, NO9E > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 center frequency
Not sure who I'm talking to here, no signature, no call. It's a little hard to explain but ... Assume you set SPAN=100 KHz and put the left edge at the bottom of each band. Changing bands back and forth using the BAND ^/v switch will preserve these settings, and every time you come back to a previous band, they will appear ... so long as you don't touch any of the P3 controls. However, using CAT commands [e.g. from a logger], you can change to a new band and the settings will hold, however returning to the previous band, the SPAN will still be 100 KHz but the center frequency will have moved and the left edge will no longer be at the bottom of the band. Admittedly, it's a bit hard to duplicate but the circumstances that cause it are common in contesting and it has been duplicated by several folk, including me. The issue has been raised here on the list more than once. I think it first came up several years ago, which could be 1 or 6, even Apollo 11 seems like yesterday to me these days. [:-) It has some of the earmarks of an intentional attempt to "do something good" in the firmware which turned out to be not so good, but I really don't know. For whatever the reason, I expect it to come back to the settings it had when I left that band. As Randy said, it is really annoying. I, and I think most, use the P3 visually instead of looking at the K3. If I set the left edge at the bottom of the band and the SPAN at 100 KHz, I automatically visualize the 1st 100 KHz directly from the screen. If it's changed as a result of band changes, my mental picture of that band segment is wrong. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 4:20 PM, Tom wrote: Hi, What exactly do you mean? It is always set to whatever you send. If you explain this a little more perhaps I can help. 73 -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Randy Farmer Sent: July 21, 2019 2:44 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 center frequency It's been brought up several times in the last two or three years. No response from the P3 software guys. It's EXTREMELY annoying that the P3 won't respect the center frequency setting if the radio is tuned via any CAT command. I've given up on hoping it will ever be fixed. My guess is that it's all hands and the cooks working on K4 software these days. 73... Randy, W8FN On 7/21/2019 12:45 PM, Fred Jensen wrote: Jim: In general, yes, if you change bands with BAND ^/v. When you change bands via the CAT, the P3 center freq won't always end up where you last had it. I believe SPAN width is preserved but the span limits show up strange. It's a known issue, has been discussed at some length here a few months ago. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 10:31 AM, Jim N7US wrote: Should the P3 center frequency and span be remembered when changing bands? Rephrasing, can they be remembered when changing bands? Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to elecraft.l...@videotron.ca --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k6...@foothill.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft SSB Bet for Sunday July 21, 2019
With our regular net control Eric WB9JNZ on vacation this week John N6JW was acting net control. Thanks John for handling the net control duties. QSB made things difficult. We again had surprisingly short skip on 20 meters and it was even shorter than last week. With such propagation challenges as mentioned above our relay stations really makes the net possible. As always a special thanks to all the relay stations noted below. July 21, 2019 check ins: N6JWJohnCA K3 936 Net control W1NGA Al CO K3 5765 N0MPM MikeIA K3S 10514 K7FHAlanOR Yaesu FT-3000 Wait list for K4 W4DML DougTN K3 6433 K6VWE StanMI K3 650 Relay station W7MDQ RichAZ Icom 7300 AE1EKen TX K3S 11611 W7QHD KurtAZ K2/100 1538 NS7PPhilOR K3 1826 KNJUU Larry NM Yaesu FT-450D K7BRR BillAZ K3S 10939 K4HYJ HankGA K3S 11697 K7JGJohnWA KX3 3519 KM4DK DirkKY KX3 3643 K4FBI MikeVA K3S 11414 AI6BBryan CA KX3 3084 N7AZT Steve AZ Kenwood TS-480 NC0JW Jim CO KX3 1356Relay station Our regular Net Control Station Eric WB9JNZ in Chicago, IL. is scheduled to be back in the saddle next Sunday after a two week vacation. Drop by when Eric kicks things off at 1800 UTC on 14.3035 MHz. Join the fun and see what challenges the propagation gods might throw our way. With propagation at a low point we employ several relay stations located around the continental USA to assist with check ins. As conditions permit we take questions and comments after check ins. Jim White - NC0JW ars.nc...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S HDSDR as a panadapter with IF out
Hi Conrad, Select Input->Sound Card Options->RF-Frontend: SDR on IF Input, IF = don't care, Global Offset=depends on the SDR-RX. I use Softrock with a modified clock, so mine is -1.6kHz. 73 Gernot, DF5RF Am 21.07.2019 um 23:36 schrieb Conrad PA5Y: I have a Perseus and I wonder if anybody is using a similar set up as a panadapter, the P3 has no mouse control and does not appeal to me having got used to HDSDR and Omnirig in the past. I suppose that I set the IF to 8.215 MHz in HDSDR? Any other tips? 73 Conrad PA5Y __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to g...@gmx.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Feature Request: Shifting VFO
Inrad had a mod about 20 years ago for the FT-1000/D which they called a "Tuning Upgrader" that provided a slower tuning rate than stock when you turned the main knob slower, restored the stock tuning rate when you turned the knob faster, and a higher tuning rate (25 KHz) when you spun the knob even faster. It was a great modification which the FT-1000 needed, but unfortunately is no longer offered. No enhancements are needed to the K3's tuning rate(s), in my opinion. 73, Kent K9ZTV On 7/21/2019 11:50 AM, Fred Jensen wrote: I had an Yaesu satellite-capable HF/VHF/UHF radio for quite awhile [FT-847??] that had a spring-loaded ring around the main tuning knob that would QSY faster the more you turned it. Yaesu called it the "Jog Ring" or something like that. Despite how good the concept sounds, I found it worse than useless ... it really [really] got in the way of using the radio. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 8:47 AM, Kevin, N4TT wrote: Or, I could propose a method of changing VFO resolution based on turn rate. I like proposing things. One out of 100 gets a "hey, not a bad idea" comment. :) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9...@socket.net --- This email has been checked for viruses by AVG. https://www.avg.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S HDSDR as a panadapter with IF out
The Perseus receiver that gets overloaded on a busy band - Is it hooked up directly to the antenna or to the IF out on K3s? I would think that the front end of the K3s should help the receiver hooked up on the IF. Raj -- Raj Dewan, N2RD rdew...@rochester.rr.com -- Original Message -- From: "Conrad PA5Y" To: "elecraft@mailman.qth.net" Sent: 7/21/2019 6:53:59 PM Subject: Re: [Elecraft] K3S HDSDR as a panadapter with IF out Indeed that is true and I have both an SRP2 and Win4K3Suite, however an SDRPlay SRP2 is several orders of magnitude inferior to a Perseus and completely collapses during EU 6m Sporadic E which is where I will be using it. Win4K3Suite software is very nice I agree. What is mindlessly simple is assuming that a fellow has not considered these choices first. K3S first rate receiver, Perseus 1st rate receiver, SDRPlay cheap and not very good. Does anyone have any experience of the proposed HDSDR and Perseus configuration? 73 Conrad PA5Y -Original Message- From: Barry Sent: 21 July 2019 23:43 To: Conrad PA5Y ; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S HDSDR as a panadapter with IF out I suspect that you could do as you suggest, but it is almost mindlessly simple to use an SDRPlay driving Win4K3 Suite. You have mouse control and other features. 73, Barry K3NDM -- Original Message -- From: "Conrad PA5Y" To: "elecraft@mailman.qth.net" Sent: 7/21/2019 5:36:06 PM Subject: [Elecraft] K3S HDSDR as a panadapter with IF out I have a Perseus and I wonder if anybody is using a similar set up as a panadapter, the P3 has no mouse control and does not appeal to me having got used to HDSDR and Omnirig in the past. I suppose that I set the IF to 8.215 MHz in HDSDR? Any other tips? 73 Conrad PA5Y __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to barrylaz...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 center frequency
Hi, What exactly do you mean? It is always set to whatever you send. If you explain this a little more perhaps I can help. 73 -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Randy Farmer Sent: July 21, 2019 2:44 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 center frequency It's been brought up several times in the last two or three years. No response from the P3 software guys. It's EXTREMELY annoying that the P3 won't respect the center frequency setting if the radio is tuned via any CAT command. I've given up on hoping it will ever be fixed. My guess is that it's all hands and the cooks working on K4 software these days. 73... Randy, W8FN On 7/21/2019 12:45 PM, Fred Jensen wrote: > Jim: In general, yes, if you change bands with BAND ^/v. When you > change bands via the CAT, the P3 center freq won't always end up where > you last had it. I believe SPAN width is preserved but the span > limits show up strange. It's a known issue, has been discussed at > some length here a few months ago. > > 73, > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > On 7/21/2019 10:31 AM, Jim N7US wrote: >> Should the P3 center frequency and span be remembered when changing >> bands? >> Rephrasing, can they be remembered when changing bands? >> >> Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to elecraft.l...@videotron.ca --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S HDSDR as a panadapter with IF out
Indeed that is true and I have both an SRP2 and Win4K3Suite, however an SDRPlay SRP2 is several orders of magnitude inferior to a Perseus and completely collapses during EU 6m Sporadic E which is where I will be using it. Win4K3Suite software is very nice I agree. What is mindlessly simple is assuming that a fellow has not considered these choices first. K3S first rate receiver, Perseus 1st rate receiver, SDRPlay cheap and not very good. Does anyone have any experience of the proposed HDSDR and Perseus configuration? 73 Conrad PA5Y -Original Message- From: Barry Sent: 21 July 2019 23:43 To: Conrad PA5Y ; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S HDSDR as a panadapter with IF out I suspect that you could do as you suggest, but it is almost mindlessly simple to use an SDRPlay driving Win4K3 Suite. You have mouse control and other features. 73, Barry K3NDM -- Original Message -- From: "Conrad PA5Y" To: "elecraft@mailman.qth.net" Sent: 7/21/2019 5:36:06 PM Subject: [Elecraft] K3S HDSDR as a panadapter with IF out >I have a Perseus and I wonder if anybody is using a similar set up as a >panadapter, the P3 has no mouse control and does not appeal to me having got >used to HDSDR and Omnirig in the past. I suppose that I set the IF to 8.215 >MHz in HDSDR? Any other tips? > >73 > >Conrad PA5Y >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net Please help support this email >list: http://www.qsl.net/donate.html Message delivered to >barrylaz...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 no RF Output
Is VOX On? Sent from my iPhone ...nr4c. bill > On Jul 21, 2019, at 2:32 PM, Harald Fritzsche wrote: > > Dear Readers, > > i made a water damage of my K3. Meanwhile Receiver is working again, after > some repairs. > > But there is still no RF output. > > Main symptom is, that in case of TX (key down in CW) i find at J7 (8.215 MHz > TXIF1) a 8.230MHz signal, but no signal passing the filter, expected > approxymatetly 8.215Mhz too. > > Any suggestions? > > Regards > Harald > DD0VS > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S HDSDR as a panadapter with IF out
I suspect that you could do as you suggest, but it is almost mindlessly simple to use an SDRPlay driving Win4K3 Suite. You have mouse control and other features. 73, Barry K3NDM -- Original Message -- From: "Conrad PA5Y" To: "elecraft@mailman.qth.net" Sent: 7/21/2019 5:36:06 PM Subject: [Elecraft] K3S HDSDR as a panadapter with IF out I have a Perseus and I wonder if anybody is using a similar set up as a panadapter, the P3 has no mouse control and does not appeal to me having got used to HDSDR and Omnirig in the past. I suppose that I set the IF to 8.215 MHz in HDSDR? Any other tips? 73 Conrad PA5Y __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to barrylaz...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S HDSDR as a panadapter with IF out
I have a Perseus and I wonder if anybody is using a similar set up as a panadapter, the P3 has no mouse control and does not appeal to me having got used to HDSDR and Omnirig in the past. I suppose that I set the IF to 8.215 MHz in HDSDR? Any other tips? 73 Conrad PA5Y __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 with accessories more than half off
P3 in perfect working condition P3TXMON transmit monitor with 2Kw HF directional coupler (or 200W VHF one) P3SVGA video adapter for VGA CBLP3Y RJ45 cable for K3s/KIO3B Value (1022.90 + 289.95) = 1,312.85 For sale less than 50% $650 plus shipping Raj, N2RD -- Raj Dewan, N2RD rdew...@rochester.rr.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 center frequency
It's been brought up several times in the last two or three years. No response from the P3 software guys. It's EXTREMELY annoying that the P3 won't respect the center frequency setting if the radio is tuned via any CAT command. I've given up on hoping it will ever be fixed. My guess is that it's all hands and the cooks working on K4 software these days. 73... Randy, W8FN On 7/21/2019 12:45 PM, Fred Jensen wrote: Jim: In general, yes, if you change bands with BAND ^/v. When you change bands via the CAT, the P3 center freq won't always end up where you last had it. I believe SPAN width is preserved but the span limits show up strange. It's a known issue, has been discussed at some length here a few months ago. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 10:31 AM, Jim N7US wrote: Should the P3 center frequency and span be remembered when changing bands? Rephrasing, can they be remembered when changing bands? Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 no RF Output
Dear Readers, i made a water damage of my K3. Meanwhile Receiver is working again, after some repairs. But there is still no RF output. Main symptom is, that in case of TX (key down in CW) i find at J7 (8.215 MHz TXIF1) a 8.230MHz signal, but no signal passing the filter, expected approxymatetly 8.215Mhz too. Any suggestions? Regards Harald DD0VS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 center frequency
Jim: In general, yes, if you change bands with BAND ^/v. When you change bands via the CAT, the P3 center freq won't always end up where you last had it. I believe SPAN width is preserved but the span limits show up strange. It's a known issue, has been discussed at some length here a few months ago. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 10:31 AM, Jim N7US wrote: Should the P3 center frequency and span be remembered when changing bands? Rephrasing, can they be remembered when changing bands? Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 center frequency
Should the P3 center frequency and span be remembered when changing bands? Rephrasing, can they be remembered when changing bands? Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Feature Request: Shifting VFO
I had an Yaesu satellite-capable HF/VHF/UHF radio for quite awhile [FT-847??] that had a spring-loaded ring around the main tuning knob that would QSY faster the more you turned it. Yaesu called it the "Jog Ring" or something like that. Despite how good the concept sounds, I found it worse than useless ... it really [really] got in the way of using the radio. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 7/21/2019 8:47 AM, Kevin, N4TT wrote: Or, I could propose a method of changing VFO resolution based on turn rate. I like proposing things. One out of 100 gets a "hey, not a bad idea" comment. :) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Feature Request: Shifting VFO
Kev, Since you use the K-Pod, why don't you set CONFIG:VFO OFS to ON, and then set CONFIG:VFO CRS for whatever Coarse setting you want (that is a per mode setting). Then on the K-Pod, when you want a fast QSY, just flip the bottom switch to the RIT position and move the knob with the coarse steps - it can work as long as you do not have RIT or XIT turned on. Switch the rocker back to VFO A (or B) to finish the fine tuning. 73, Don W3FPR On 7/21/2019 11:47 AM, Kevin, N4TT wrote: A scenario from yesterday's contest. I have the P3 set up to view about 3 or more KHz of spectrum. I use a K-pod to run my way up from low to high. I like the FINE setting to get that signal right where I want it but would like a course transition up to that signal. I could push a button to turn off FINE or turn on COARSE, run to the signal, push a button again to go back to FINE and finish the tuning. I could set up the macro buttons on the KPOD to do this so I didn't have to reach for the radio but still have to turn the functions on/off. Or, I could propose a method of changing VFO resolution based on turn rate. I like proposing things. One out of 100 gets a "hey, not a bad idea" comment. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Feature Request: Shifting VFO
A scenario from yesterday's contest. I have the P3 set up to view about 3 or more KHz of spectrum. I use a K-pod to run my way up from low to high. I like the FINE setting to get that signal right where I want it but would like a course transition up to that signal. I could push a button to turn off FINE or turn on COARSE, run to the signal, push a button again to go back to FINE and finish the tuning. I could set up the macro buttons on the KPOD to do this so I didn't have to reach for the radio but still have to turn the functions on/off. Or, I could propose a method of changing VFO resolution based on turn rate. I like proposing things. One out of 100 gets a "hey, not a bad idea" comment. :) Options to change rates or even disable rate changes sounds fine to me. There are features of the radio I don't use or turn off and they don't affect me while operating. Others find those features useful so I'm all for them being included. Clicking on spots is a possibility but not often permitted (or changes class) in contests. I should be clear, the value of this feature for me is in contesting where I'd prefer to keep my two hands in place rather than flittering around different controls. "MENU:VFO CTS will select 100/200/400 steps per revolution of the encoder." Simply (tongue in cheek) add the option 100/200/400/variable. Maybe the variable shifts between 100, 200, 400 based on VFO speed. At any rate, the request stands. I would like to see a variable tuning rate in the K3s, KX3 and K4HD which I plan to purchase after it is available or test one out if Elecraft wants to send me one to play with. Thanks for considering. 73, Kev N4TT On Sun, Jul 21, 2019 at 10:52 AM Ignacy wrote: > Is it a feature of ICOMs? > Neat as QSY to a far away frequency can be done without pressing any extra > button. > On the other hand, band-segment memories and clicking on spots makes > long-range QSYing less important. > Ignacy, NO9E > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kkinde...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Feature Request: Shifting VFO
Is it a feature of ICOMs? Neat as QSY to a far away frequency can be done without pressing any extra button. On the other hand, band-segment memories and clicking on spots makes long-range QSYing less important. Ignacy, NO9E -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com