[Elecraft] Seeking input on KPA1500 station configurations
The KPA1500 has very flexible I/O, and plenty of space for adding new control features in firmware. I/O ports include Ethernet, USB, RS-232, K3 Accessory connector (including Icom band voltages), AH-4, CI-V, keying input (PTT), ALC out, and remote power-on. In order to prioritize our efforts towards the facilitation of remote control and interfacing, we’d like to hear from those considering how they might integrate a KPA1500 into their station. Please describe both third-party and home-built gear that you might be using. In what situations could the KPA1500 itself simplify setup or operation? I can’t promise we’ll be able to respond to every question or suggestion, but we’ll keep all of your input for our internal discussions. 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Seeking input on KPA1500 station configurations
Not sure if this has been suggested or not, but . . . . If you have plenty of room -- and you're not doing anything else(!), I think it would be interesting to have a PTT counter - a count of how many PTT closures during its lifetime. 73, Dan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Seeking input on KPA1500 station configurations
Wayne/Eric, Maybe too late, I know, but I've been thinking about my ideal desk setup for HF/6m/2m and have come up with the following list of wants for the KPA1500 system: I'd like the KPA1500 power supply consumption to be less than 1W when the PA is "off". I'd like the power supply to be able to be turned "on" by a single button push on the front panel of the amplifier (on the desk). That is, the less-than-1W power supply, via a push-button, operates an AC contactor in the KPA1500's power supply unit (under the desk) to turn on the main power. I'd like the power supply to be able to provide an extra clean 25A (30A?) at 13.8V via several sets (4?) of 30A Anderson PowerPoles on the back panel so that I can run my whole HF station (K3s + P3) from just the one KPA1500 power supply and I'd like to be able to turn the power for this extra power supply on/off from a push button on the front panel of the KPA1500 (on the desk) or simply have it turn on/off with the main AC power contactor. Other wants (not KPA1500): I'd like Elecraft to make a K3s/P3 matching stereo speaker that is 17" wide x 4" tall x 10" deep, so that it sits neatly underneath a K3s/P3 combo. I'm actually making my own right now, but I'd prefer an Elecraft "branded" one. Thanks for listening! Cheers es 73, Dave AD6A --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
Hi, Here's one.. Since the KPA1500 can be turned on remotely, why not have it generate the necessary signal on the K3 accessory connector to turn on the K3 as well? Win4K3Suite can leverage this as well. 73 -Original Message- From: Wayne Burdick Sent: Thursday, June 8, 2017 7:23 PM To: Elecraft Reflector Cc: elecraft...@yahoogroups.com Subject: [Elecraft] Seeking input on KPA1500 station configurations The KPA1500 has very flexible I/O, and plenty of space for adding new control features in firmware. I/O ports include Ethernet, USB, RS-232, K3 Accessory connector (including Icom band voltages), AH-4, CI-V, keying input (PTT), ALC out, and remote power-on. In order to prioritize our efforts towards the facilitation of remote control and interfacing, we’d like to hear from those considering how they might integrate a KPA1500 into their station. Please describe both third-party and home-built gear that you might be using. In what situations could the KPA1500 itself simplify setup or operation? I can’t promise we’ll be able to respond to every question or suggestion, but we’ll keep all of your input for our internal discussions. 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
Hello group, This is my first post here, but have been reading the mail for a while. I currently do not have any Elecraft gear, but have built a K2, and owned KX1 and KX3. I am considering upgrading my station in the near future and am interested in the control possibilities of the KPA 1500. I currently use an AH-4 for remote tuning of a non resonant vertical dipole that I use on the upper bands, and have on order a Stockcorner JC-4s kilowatt remote tuner to replace the AH-4. To the topic here, I am interested in the mention of a connection for the AH-4 on the KPA 1500 and and what it's use would be given the mismatch of the power ratings of the two devices? Now on to the station setup I can imagine... It would be useful in my station setup if the KPA 1500 could sense a frequency change and initiate a 10-20 watt tune cycle with the JC-4s before going back to online status. Ideally the KPA 1500 could do this without communication with the exciter making that interface universal. Alternately, with the K3(s), any tune initiation from the transceiver could cause the KPA 1500 to initiate a tune cycle with the JC-4s with the KPA 1500 in bypass. Or even more ideally, Elecraft comes out with a fully integrated remote tuner to match the KPA 1500 for those of us who need the wider matching range in our urban antenna restricted situations. A wide range tuner in the shack would also work, but then you would only want to do that with some very low loss coax like 7/8 Heliax. Thanks for the opportunity to give input and for the example you set as a company. 73 de KV4TT - Mike On Jun 8, 2017 7:25 PM, "Wayne Burdick" wrote: > The KPA1500 has very flexible I/O, and plenty of space for adding new > control features in firmware. I/O ports include Ethernet, USB, RS-232, K3 > Accessory connector (including Icom band voltages), AH-4, CI-V, keying > input (PTT), ALC out, and remote power-on. > > In order to prioritize our efforts towards the facilitation of remote > control and interfacing, we’d like to hear from those considering how they > might integrate a KPA1500 into their station. Please describe both > third-party and home-built gear that you might be using. In what situations > could the KPA1500 itself simplify setup or operation? > > I can’t promise we’ll be able to respond to every question or suggestion, > but we’ll keep all of your input for our internal discussions. > > 73, > Wayne > N6KR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kv...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
Hi Mike! I used to use an AH-4. Check the power handling capability of the unit. I think you'll find it's incapable of handling the KPA500, let alone the KPA1500. 73! Ken - K0PP On Jun 13, 2017 11:43, "Michael Zabel" wrote: > Hello group, > > This is my first post here, but have been reading the mail for a while. > I currently do not have any Elecraft gear, but have built a K2, and owned > KX1 and KX3. > > I am considering upgrading my station in the near future and am interested > in the control possibilities of the KPA 1500. > > I currently use an AH-4 for remote tuning of a non resonant vertical dipole > that I use on the upper bands, and have on order a Stockcorner JC-4s > kilowatt remote tuner to replace the AH-4. > > To the topic here, I am interested in the mention of a connection for the > AH-4 on the KPA 1500 and and what it's use would be given the mismatch of > the power ratings of the two devices? > > Now on to the station setup I can imagine... > > It would be useful in my station setup if the KPA 1500 could sense a > frequency change and initiate a 10-20 watt tune cycle with the JC-4s before > going back to online status. Ideally the KPA 1500 could do this without > communication with the exciter making that interface universal. > > Alternately, with the K3(s), any tune initiation from the transceiver could > cause the KPA 1500 to initiate a tune cycle with the JC-4s with the KPA > 1500 in bypass. > > Or even more ideally, Elecraft comes out with a fully integrated remote > tuner to match the KPA 1500 for those of us who need the wider matching > range in our urban antenna restricted situations. > > A wide range tuner in the shack would also work, but then you would only > want to do that with some very low loss coax like 7/8 Heliax. > > Thanks for the opportunity to give input and for the example you set as a > company. > > 73 de KV4TT - Mike > > > > > On Jun 8, 2017 7:25 PM, "Wayne Burdick" wrote: > > > The KPA1500 has very flexible I/O, and plenty of space for adding new > > control features in firmware. I/O ports include Ethernet, USB, RS-232, K3 > > Accessory connector (including Icom band voltages), AH-4, CI-V, keying > > input (PTT), ALC out, and remote power-on. > > > > In order to prioritize our efforts towards the facilitation of remote > > control and interfacing, we’d like to hear from those considering how > they > > might integrate a KPA1500 into their station. Please describe both > > third-party and home-built gear that you might be using. In what > situations > > could the KPA1500 itself simplify setup or operation? > > > > I can’t promise we’ll be able to respond to every question or suggestion, > > but we’ll keep all of your input for our internal discussions. > > > > 73, > > Wayne > > N6KR > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to kv...@arrl.net > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kengk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
Here is a link to the JC-4s I have on order, it is rated 1 kw ssb. http://www.stockcorner.nl/index.php/jc-4-automatic-antenna-tuner-1kw KV4TT - Mike On Jun 13, 2017 1:50 PM, "Ken G Kopp" wrote: > Hi Mike! > > I used to use an AH-4. Check the power handling capability of the unit. > I think you'll find it's incapable of handling the KPA500, let alone the > KPA1500. > > 73! > > Ken - K0PP > > On Jun 13, 2017 11:43, "Michael Zabel" wrote: > >> Hello group, >> >> This is my first post here, but have been reading the mail for a while. >> I currently do not have any Elecraft gear, but have built a K2, and owned >> KX1 and KX3. >> >> I am considering upgrading my station in the near future and am interested >> in the control possibilities of the KPA 1500. >> >> I currently use an AH-4 for remote tuning of a non resonant vertical >> dipole >> that I use on the upper bands, and have on order a Stockcorner JC-4s >> kilowatt remote tuner to replace the AH-4. >> >> To the topic here, I am interested in the mention of a connection for the >> AH-4 on the KPA 1500 and and what it's use would be given the mismatch of >> the power ratings of the two devices? >> >> Now on to the station setup I can imagine... >> >> It would be useful in my station setup if the KPA 1500 could sense a >> frequency change and initiate a 10-20 watt tune cycle with the JC-4s >> before >> going back to online status. Ideally the KPA 1500 could do this without >> communication with the exciter making that interface universal. >> >> Alternately, with the K3(s), any tune initiation from the transceiver >> could >> cause the KPA 1500 to initiate a tune cycle with the JC-4s with the KPA >> 1500 in bypass. >> >> Or even more ideally, Elecraft comes out with a fully integrated remote >> tuner to match the KPA 1500 for those of us who need the wider matching >> range in our urban antenna restricted situations. >> >> A wide range tuner in the shack would also work, but then you would only >> want to do that with some very low loss coax like 7/8 Heliax. >> >> Thanks for the opportunity to give input and for the example you set as a >> company. >> >> 73 de KV4TT - Mike >> >> >> >> >> On Jun 8, 2017 7:25 PM, "Wayne Burdick" wrote: >> >> > The KPA1500 has very flexible I/O, and plenty of space for adding new >> > control features in firmware. I/O ports include Ethernet, USB, RS-232, >> K3 >> > Accessory connector (including Icom band voltages), AH-4, CI-V, keying >> > input (PTT), ALC out, and remote power-on. >> > >> > In order to prioritize our efforts towards the facilitation of remote >> > control and interfacing, we’d like to hear from those considering how >> they >> > might integrate a KPA1500 into their station. Please describe both >> > third-party and home-built gear that you might be using. In what >> situations >> > could the KPA1500 itself simplify setup or operation? >> > >> > I can’t promise we’ll be able to respond to every question or >> suggestion, >> > but we’ll keep all of your input for our internal discussions. >> > >> > 73, >> > Wayne >> > N6KR >> > >> > __ >> > Elecraft mailing list >> > Home: http://mailman.qth.net/mailman/listinfo/elecraft >> > Help: http://mailman.qth.net/mmfaq.htm >> > Post: mailto:Elecraft@mailman.qth.net >> > >> > This list hosted by: http://www.qsl.net >> > Please help support this email list: http://www.qsl.net/donate.html >> > Message delivered to kv...@arrl.net >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to kengk...@gmail.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
Wayne, Sorry for the delayed response. What seems to be missing from the KPA1500, compared to the Alpha 87A, is a keying OUTPUT on an RCA phono jack. If it's too late to add another jack to the KPA1500, perhaps the REM jack could be reprogrammed via firmware to do this function, instead of remote power on? Note that it also has to work when the amplifier is OFF. From the Alpha 87A manual: "KEY OUT – Provides a pull-down to ground (through 47 ohm resistor) which follows the line connected to the RELAY jack when the amplifier is ON and in OPERATE condition. When the 87A is in STANDBY or OFF, KEY OUT is directly connected to the RELAY jack by a closed relay contact in the amplifier. Useful for special T/R hook-ups when amplifier is used with exciters having poor T/R sequencing." Some folks have to send keying input to the amplifier, and let the amplifier key the radio, to prevent hot switching. It may also be useful in SO2R lockout systems. In my shack, I currently wire two of these connectors in parallel (from two amps) into a simple RCA Y-cable to a pre-amplifier's power disconnect line on a Pixel Loop. Grounding this line on either amplifier will then remove power from the antenna-mounted pre-amp whenever I transmit. The power coupler is a Clifton Labs Z1203B which is 100% compatible with the Pixel Loop, but it operates silently at QSK speeds (unlike the original Pixel power coupler which has a noisy relay). 73, Bob, N6TV On Thu, Jun 8, 2017 at 4:23 PM, Wayne Burdick wrote: > The KPA1500 has very flexible I/O, and plenty of space for adding new > control features in firmware. I/O ports include Ethernet, USB, RS-232, K3 > Accessory connector (including Icom band voltages), AH-4, CI-V, keying > input (PTT), ALC out, and remote power-on. > > In order to prioritize our efforts towards the facilitation of remote > control and interfacing, we’d like to hear from those considering how they > might integrate a KPA1500 into their station. Please describe both > third-party and home-built gear that you might be using. In what situations > could the KPA1500 itself simplify setup or operation? > > I can’t promise we’ll be able to respond to every question or suggestion, > but we’ll keep all of your input for our internal discussions. > > 73, > Wayne > N6KR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
I originally ordered the 1kw tuner with the KPA 500 in mind.then the surprise announcement of the KPA 1500, and talk of flexibility of control options. Stock corner also has a 5kw tuner, but at 3200 Euros!! KV4TT- Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
This would be a great help! I just know myself, and sooner or later I will TX full power into the untuned antenna/tuner. Though the rigs rx performance is far from ideal, the current setup has me pretty spoiled. The Icom trx will initiate a tune of the AH-4 at low power if I have changed frequency more than 1 %. The JC-4s I have on order works on the AH-4 protocol too. Just looking to add an amp to the station when I upgrade and the Elecraft's have my eye. KV4TT-Mike On Jun 13, 2017 2:21 PM, "Dick Dievendorff" wrote: Mike: The "Tune" connector on the back of the KPA1500, like the KAT500, can be used with an ICOM transceiver to cause a transceiver TUNE button press to start a tune cycle for the KPA1500's ATU. No AH-4 is involved, the AH-4 is designed for the 100-watt category. The ICOM transceiver sends and receives the same signals as it would with an AH-4. But it's the Elecraft ATU, not the ICOM AH-4. If you want to use a remote tuner, it should be capable of handing the amplified output, the ATU tuning negotiation should be between the exciter and remote ATU (which could well be the AH-4 protocol), and the KPA1500 can be used in its ATU bypassed configuration. We will be on the lookout for ways for the KPA1500 to help with this, like bypassing the amplifier when ATU tuning. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-bounces@ mailman.qth.net] On Behalf Of Michael Zabel Sent: Tuesday, June 13, 2017 10:43 To: Elecraft Reflector Subject: Re: [Elecraft] Seeking input on KPA1500 station configurations Hello group, This is my first post here, but have been reading the mail for a while. I currently do not have any Elecraft gear, but have built a K2, and owned KX1 and KX3. I am considering upgrading my station in the near future and am interested in the control possibilities of the KPA 1500. I currently use an AH-4 for remote tuning of a non resonant vertical dipole that I use on the upper bands, and have on order a Stockcorner JC-4s kilowatt remote tuner to replace the AH-4. To the topic here, I am interested in the mention of a connection for the AH-4 on the KPA 1500 and and what it's use would be given the mismatch of the power ratings of the two devices? Now on to the station setup I can imagine... It would be useful in my station setup if the KPA 1500 could sense a frequency change and initiate a 10-20 watt tune cycle with the JC-4s before going back to online status. Ideally the KPA 1500 could do this without communication with the exciter making that interface universal. Alternately, with the K3(s), any tune initiation from the transceiver could cause the KPA 1500 to initiate a tune cycle with the JC-4s with the KPA 1500 in bypass. Or even more ideally, Elecraft comes out with a fully integrated remote tuner to match the KPA 1500 for those of us who need the wider matching range in our urban antenna restricted situations. A wide range tuner in the shack would also work, but then you would only want to do that with some very low loss coax like 7/8 Heliax. Thanks for the opportunity to give input and for the example you set as a company. 73 de KV4TT - Mike On Jun 8, 2017 7:25 PM, "Wayne Burdick" wrote: > The KPA1500 has very flexible I/O, and plenty of space for adding new > control features in firmware. I/O ports include Ethernet, USB, RS-232, > K3 Accessory connector (including Icom band voltages), AH-4, CI-V, > keying input (PTT), ALC out, and remote power-on. > > In order to prioritize our efforts towards the facilitation of remote > control and interfacing, we’d like to hear from those considering how > they might integrate a KPA1500 into their station. Please describe > both third-party and home-built gear that you might be using. In what > situations could the KPA1500 itself simplify setup or operation? > > I can’t promise we’ll be able to respond to every question or > suggestion, but we’ll keep all of your input for our internal discussions. > > 73, > Wayne > N6KR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > kv...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@elecraft.com __ Elecra
Re: [Elecraft] Seeking input on KPA1500 station configurations
> On 16 Jun 2017, at 00:28, Dave AD6A wrote: > > I'd like the power supply to be able to be turned "on" by a single button > push on the front panel of the amplifier (on the desk). Would be good if "remote-on" would be possible as well. Possible options include serial command, a dedicated I/O-line, or control lines of a serial port. Such a setup could also be a nice basis for remote operation, including dead man switch type setups, power sequencing and so on. Going a bit outside the scope of the post I'm replying to, such a sequencing could also be useful for a later setup of a KPA1500, and a "headless" box similar to K3/K3S, with a RemoteRig-type control. Small controller unit to power on both the KPA1500 and the headless box as requested by RemoteRig interface, then operate as normal. Allow controller unit to include a timer, disconnect on lost connectivity to the RemoteRig, etc. Couple of remote GPIO, to allow for sensors based on users need (someone entered the room? Ambient temperature? Temperature at amp chassis?), and things are starting to look very good for remote users. Terje / LB8KH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Seeking input on KPA1500 station configurations
My 2 cents. Drop the RS232 line totally and have only an IP / Lan connection. This will solve so many connectivity issues. With a PC client software, it will just find the amplifier. This is what other Amp vendors are now doing and it is litterly plug and play. The next K-radio should also be LAN aware. Mike va3mw __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com