[Emc-users] 2.6.4

[a k]

Hi
i want to install emc2--2.6.4
i down load it from linuxcnc
1st -- is 2.6.4 most current one?
2nd when i down load, it gives options

1install Graphical
2install (text)
3install Fail Safe

question is which one do i need?
i want to it look like 2.5.xxx  - not sure how to say it --like normal etc
or better to ask what is difference between those 3 options for install
emc2-2.6.4  ?

thank you
aram
--
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4

[Jon Elson]

On 11/16/2014 02:38 PM, a k wrote:
> Hi
> i want to install emc2--2.6.4
> i down load it from linuxcnc
> 1st -- is 2.6.4 most current one?
> 2nd when i down load, it gives options
>
> 1install Graphical
> 2install (text)
> 3install Fail Safe
>
> question is which one do i need?
> i want to it look like 2.5.xxx  - not sure how to say it --like normal etc
> or better to ask what is difference between those 3 options for install
> emc2-2.6.4  ?
>
>
Try option 1 first.  This will work on most computer - 
monitor combinations just fine.

On some odd combinations, the screen will come up scrambled 
and you can't see what
questions are being asked, or you get no display at all.  In 
those cases, try option
2.  it will use a very blocky character-based menu 
selection, but will allow the install
to work on combinations where the install CD's OS can't set 
up the screen resolution
correctly.  In both cases, the installed system will be the 
same. these options
don't affect what is installed or how it is configured, they 
only affect the way
the menus are displayed DURING the install procedure.

I'm not sure what option 3 is for, it loads a very 
stripped-down OS for the
install, and I think makes it impossible to update the 
system during the install
because there's no network.

And, there is no EMC2, and hasn't been for several years.

Jon

--
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4

[linden]

This list is just the selection for the install process not the actual 
LinuxCNC soft ware
Just use #1 Graphical install and fallow the prompts. The default 
settings should be right for most situations if you get stuck or have 
any questions ask here and we will see what we can do.


On 14-11-17 06:28 AM, Jon Elson wrote:
> On 11/16/2014 02:38 PM, a k wrote:
>> Hi
>> i want to install emc2--2.6.4
>> i down load it from linuxcnc
>> 1st -- is 2.6.4 most current one?
>> 2nd when i down load, it gives options
>>
>> 1install Graphical
>> 2install (text)
>> 3install Fail Safe
>>
>> question is which one do i need?
>> i want to it look like 2.5.xxx  - not sure how to say it --like normal etc
>> or better to ask what is difference between those 3 options for install
>> emc2-2.6.4  ?
>>
>>
> Try option 1 first.  This will work on most computer -
> monitor combinations just fine.
>
> On some odd combinations, the screen will come up scrambled
> and you can't see what
> questions are being asked, or you get no display at all.  In
> those cases, try option
> 2.  it will use a very blocky character-based menu
> selection, but will allow the install
> to work on combinations where the install CD's OS can't set
> up the screen resolution
> correctly.  In both cases, the installed system will be the
> same. these options
> don't affect what is installed or how it is configured, they
> only affect the way
> the menus are displayed DURING the install procedure.
>
> I'm not sure what option 3 is for, it loads a very
> stripped-down OS for the
> install, and I think makes it impossible to update the
> system during the install
> because there's no network.
>
> And, there is no EMC2, and hasn't been for several years.
>
> Jon
>
> --
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
> http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


--
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4

[alex chiosso]

Hi Aram.
Look at this video  from
YouTube .
It's well done and clear so you should understand the installation process
of the LCNC new version.
The same author made other interesting videos on the same argument
(upgrading to the latest version, latency test ) .
I like the Debian Wheezy installation (2.6.x) due to the xfce desktop much
easier than Ubuntu Unity Desktop.
I've installed LCNC on a new PC the last week using the instruction of the
video above and I've got it working.

Regards

Alex

On Sun, Nov 16, 2014 at 11:48 PM, linden  wrote:

> This list is just the selection for the install process not the actual
> LinuxCNC soft ware
> Just use #1 Graphical install and fallow the prompts. The default
> settings should be right for most situations if you get stuck or have
> any questions ask here and we will see what we can do.
>
>
> On 14-11-17 06:28 AM, Jon Elson wrote:
> > On 11/16/2014 02:38 PM, a k wrote:
> >> Hi
> >> i want to install emc2--2.6.4
> >> i down load it from linuxcnc
> >> 1st -- is 2.6.4 most current one?
> >> 2nd when i down load, it gives options
> >>
> >> 1install Graphical
> >> 2install (text)
> >> 3install Fail Safe
> >>
> >> question is which one do i need?
> >> i want to it look like 2.5.xxx  - not sure how to say it --like normal
> etc
> >> or better to ask what is difference between those 3 options for install
> >> emc2-2.6.4  ?
> >>
> >>
> > Try option 1 first.  This will work on most computer -
> > monitor combinations just fine.
> >
> > On some odd combinations, the screen will come up scrambled
> > and you can't see what
> > questions are being asked, or you get no display at all.  In
> > those cases, try option
> > 2.  it will use a very blocky character-based menu
> > selection, but will allow the install
> > to work on combinations where the install CD's OS can't set
> > up the screen resolution
> > correctly.  In both cases, the installed system will be the
> > same. these options
> > don't affect what is installed or how it is configured, they
> > only affect the way
> > the menus are displayed DURING the install procedure.
> >
> > I'm not sure what option 3 is for, it loads a very
> > stripped-down OS for the
> > install, and I think makes it impossible to update the
> > system during the install
> > because there's no network.
> >
> > And, there is no EMC2, and hasn't been for several years.
> >
> > Jon
> >
> >
> --
> > Comprehensive Server Monitoring with Site24x7.
> > Monitor 10 servers for $9/Month.
> > Get alerted through email, SMS, voice calls or mobile push notifications.
> > Take corrective actions from your mobile device.
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
>
> --
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] 2.6.4---2.5.4

[a k]

hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing this

When i start 2.5.4 - open CNC (my is 5i20)
than F1, and F2.
after that i can pick axis like X Y Z  and pick increment

with 2.6.4 it does not work like that
Here is how it works on my computer
Pick interface. mesa- 5i20
CNC open
than F1.
than F2 - and when i pick F2 machine start move on continues feed every
time i pick F2..
i can not pick - change axis they are frozen .
Every time click on F2 result in motion of X axis and fallowing error. -can
not change axis - nothing - all axis are -frozen
i pick MDI and i can not type in nothing it froze also.

does any one have similar situation with 2.6.4?

i burn it of DVD - how i can verify that it is good copy?

thanks
aram
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

if computer good to run 2.5.4 than it should be good to run 2.6.4?
so computer type is not an issue ?
copy of my download --binary.hybrid.iso--- has a size --
--1,10 GB (1 187 692 544 bytes)

is this right?


On Sat, Nov 22, 2014 at 4:04 PM, a k  wrote:

> hi
> i fund that i have bigger problem.
> 2.6.4 does not work as 2.5.4
> i just check before typing this
>
> When i start 2.5.4 - open CNC (my is 5i20)
> than F1, and F2.
> after that i can pick axis like X Y Z  and pick increment
>
> with 2.6.4 it does not work like that
> Here is how it works on my computer
> Pick interface. mesa- 5i20
> CNC open
> than F1.
> than F2 - and when i pick F2 machine start move on continues feed every
> time i pick F2..
> i can not pick - change axis they are frozen .
> Every time click on F2 result in motion of X axis and fallowing error.
> -can not change axis - nothing - all axis are -frozen
> i pick MDI and i can not type in nothing it froze also.
> 
> does any one have similar situation with 2.6.4?
>
> i burn it of DVD - how i can verify that it is good copy?
>
> thanks
> aram
>
>
>
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[Peter C. Wallace]

On Sat, 22 Nov 2014, a k wrote:

> Date: Sat, 22 Nov 2014 16:04:20 -0800
> From: a k 
> Reply-To: "Enhanced Machine Controller (EMC)"
> 
> To: "Enhanced Machine Controller (EMC)" 
> Subject: [Emc-users] 2.6.4---2.5.4
> 
> hi
> i fund that i have bigger problem.
> 2.6.4 does not work as 2.5.4
> i just check before typing this
>
> When i start 2.5.4 - open CNC (my is 5i20)
> than F1, and F2.
> after that i can pick axis like X Y Z  and pick increment
>
> with 2.6.4 it does not work like that
> Here is how it works on my computer
> Pick interface. mesa- 5i20
> CNC open
> than F1.
> than F2 - and when i pick F2 machine start move on continues feed every
> time i pick F2..
> i can not pick - change axis they are frozen .
> Every time click on F2 result in motion of X axis and fallowing error. -can
> not change axis - nothing - all axis are -frozen
> i pick MDI and i can not type in nothing it froze also.
> 
> does any one have similar situation with 2.6.4?
>
> i burn it of DVD - how i can verify that it is good copy?


Did you copy your working hal and ini files to the new system
and launch linuxcnc using your working files?

>
> thanks
> aram
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

hi
i try and got same problem with live CD no installation--
even without any installation.
than i try 2.5.4 and total different result.
Problem is that when i click F1 - off e-stop, i should be able to pick axis
-- X Y Z, able to type in in MDI , AND after i push F2 machine power up and
after i click on Y axis jog - (any increment ) tham machine should move.
that is how 2.5.4  works on my computer.
And on my computer for 2.6.4 nothig is same.
in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are frozen
not pickable, and i can open MDI but i CAN NOT type there anything.

Yesterday i did see that 2.6.5 -- already there. i copy it and try it. same
result as with 2.6.4-- no difference.

it can not be that only i have this problem. maybe not many try 2.6.5
why do i have this problem?




On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace  wrote:

> On Sat, 22 Nov 2014, a k wrote:
>
> > Date: Sat, 22 Nov 2014 16:04:20 -0800
> > From: a k 
> > Reply-To: "Enhanced Machine Controller (EMC)"
> > 
> > To: "Enhanced Machine Controller (EMC)"  >
> > Subject: [Emc-users] 2.6.4---2.5.4
> >
> > hi
> > i fund that i have bigger problem.
> > 2.6.4 does not work as 2.5.4
> > i just check before typing this
> >
> > When i start 2.5.4 - open CNC (my is 5i20)
> > than F1, and F2.
> > after that i can pick axis like X Y Z  and pick increment
> >
> > with 2.6.4 it does not work like that
> > Here is how it works on my computer
> > Pick interface. mesa- 5i20
> > CNC open
> > than F1.
> > than F2 - and when i pick F2 machine start move on continues feed every
> > time i pick F2..
> > i can not pick - change axis they are frozen .
> > Every time click on F2 result in motion of X axis and fallowing error.
> -can
> > not change axis - nothing - all axis are -frozen
> > i pick MDI and i can not type in nothing it froze also.
> > 
> > does any one have similar situation with 2.6.4?
> >
> > i burn it of DVD - how i can verify that it is good copy?
>
>
> Did you copy your working hal and ini files to the new system
> and launch linuxcnc using your working files?
>
> >
> > thanks
> > aram
> >
> --
> > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> > from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> > with Interactivity, Sharing, Native Excel Exports, App Integration & more
> > Get technology previously reserved for billion-dollar corporations, FREE
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
>
> Peter Wallace
> Mesa Electronics
>
> (\__/)
> (='.'=) This is Bunny. Copy and paste bunny into your
> (")_(") signature to help him gain world domination.
>
>
>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[Gene Heskett]

On Sunday 23 November 2014 14:12:38 a k did opine
And Gene did reply:
> hi
> i try and got same problem with live CD no installation--
> even without any installation.
> than i try 2.5.4 and total different result.
> Problem is that when i click F1 - off e-stop, i should be able to pick
> axis -- X Y Z, able to type in in MDI , AND after i push F2 machine
> power up and after i click on Y axis jog - (any increment ) tham
> machine should move. that is how 2.5.4  works on my computer.
> And on my computer for 2.6.4 nothig is same.
> in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are
> frozen not pickable, and i can open MDI but i CAN NOT type there
> anything.
> 
> Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
> same result as with 2.6.4-- no difference.
> 
> it can not be that only i have this problem. maybe not many try 2.6.5
> why do i have this problem?

Because, since I have been using LCNC, starting at about 2.0.0 it has 
always been a 2 step process to enable the machinery.

You have always had to press F1 once and F2 once, F1 gets it out of its 
default e-stop startup, but it then takes an F2 press to actually enable 
the machine.

Be aware that many modern keyboards now default to an Fkey disabled state 
at powerup.  You can identify those keyboards by their having a key or 
button labeled F, which when pressed, will enable the Fkeys until the next 
power up, or they can be disabled again by a second tap on the F key.

> On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace  
wrote:
> > On Sat, 22 Nov 2014, a k wrote:
> > > Date: Sat, 22 Nov 2014 16:04:20 -0800
> > > From: a k 
> > > Reply-To: "Enhanced Machine Controller (EMC)"
> > > 
> > > 
> > > 
> > > To: "Enhanced Machine Controller (EMC)"
> > >  > > 
> > > Subject: [Emc-users] 2.6.4---2.5.4
> > > 
> > > hi
> > > i fund that i have bigger problem.
> > > 2.6.4 does not work as 2.5.4
> > > i just check before typing this
> > > 
> > > When i start 2.5.4 - open CNC (my is 5i20)
> > > than F1, and F2.
> > > after that i can pick axis like X Y Z  and pick increment
> > > 
> > > with 2.6.4 it does not work like that
> > > Here is how it works on my computer
> > > Pick interface. mesa- 5i20
> > > CNC open
> > > than F1.
> > > than F2 - and when i pick F2 machine start move on continues feed
> > > every time i pick F2..
> > > i can not pick - change axis they are frozen .
> > > Every time click on F2 result in motion of X axis and fallowing
> > > error.
> > 
> > -can
> > 
> > > not change axis - nothing - all axis are -frozen
> > > i pick MDI and i can not type in nothing it froze also.
> > > 
> > > does any one have similar situation with 2.6.4?
> > > 
Not here.  This makes me ask what keyboard emulation you are using?

Its within the realm of possible that the wrong keyboard translation is 
doing something it should not be done, but that is just a SWAG on my part.

> > > i burn it of DVD - how i can verify that it is good copy?

I believe the site where you downloaded the disk image from should have a 
downloadable md5sum or possibly an sha1sum and doing the same sum 
operation on your disk would prove its integrity.
.
> > Did you copy your working hal and ini files to the new system
> > and launch linuxcnc using your working files?
> >

This is very important, if not you will have to start the configuration 
from scratch. 

> > > thanks
> > > aram
> > 
> > -
> > -
> > 
> > > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> > > from Actuate! Instantly Supercharge Your Business Reports and
> > > Dashboards with Interactivity, Sharing, Native Excel Exports, App
> > > Integration & more Get technology previously reserved for
> > > billion-dollar corporations, FREE
> > 
> > http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg
> > .clktrk
> > 
> > > ___
> > > Emc-users mailing list
> > > Emc-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/emc-users
> > 
> > Peter Wallace
> > Mesa Electronics
> > 
> > (\__/)
> > (='.'=) This is Bunny. Copy and paste bunny into your
> > (")_(") signature to help him gain world domination.
> >

Re: [Emc-users] 2.6.4---2.5.4

[a k]

i did try 2.6.4 and 2.6.5 on another computer and i even can not it start
and here is error

Debug file information:
.
Error: could not insert module
/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hm2_pci.ko: No such device
hm2-servo.hal:46: exit value: 1
hm2-servo.hal:46: insmod failed, returned -1
See the output of 'dmesg' for more information.
4624
  PID TTY  STAT   TIME COMMAND
Stopping realtime threads
Unloading hal components

//
did any one actually using 2.6.4?



On Sun, Nov 23, 2014 at 7:12 PM, a k  wrote:

> hi
> i try and got same problem with live CD no installation--
> even without any installation.
> than i try 2.5.4 and total different result.
> Problem is that when i click F1 - off e-stop, i should be able to pick
> axis -- X Y Z, able to type in in MDI , AND after i push F2 machine power
> up and after i click on Y axis jog - (any increment ) tham machine should
> move.
> that is how 2.5.4  works on my computer.
> And on my computer for 2.6.4 nothig is same.
> in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are frozen
> not pickable, and i can open MDI but i CAN NOT type there anything.
>
> Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
> same result as with 2.6.4-- no difference.
>
> it can not be that only i have this problem. maybe not many try 2.6.5
> why do i have this problem?
>
>
>
>
> On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace  wrote:
>
>> On Sat, 22 Nov 2014, a k wrote:
>>
>> > Date: Sat, 22 Nov 2014 16:04:20 -0800
>> > From: a k 
>> > Reply-To: "Enhanced Machine Controller (EMC)"
>> > 
>> > To: "Enhanced Machine Controller (EMC)" <
>> emc-users@lists.sourceforge.net>
>> > Subject: [Emc-users] 2.6.4---2.5.4
>> >
>> > hi
>> > i fund that i have bigger problem.
>> > 2.6.4 does not work as 2.5.4
>> > i just check before typing this
>> >
>> > When i start 2.5.4 - open CNC (my is 5i20)
>> > than F1, and F2.
>> > after that i can pick axis like X Y Z  and pick increment
>> >
>> > with 2.6.4 it does not work like that
>> > Here is how it works on my computer
>> > Pick interface. mesa- 5i20
>> > CNC open
>> > than F1.
>> > than F2 - and when i pick F2 machine start move on continues feed every
>> > time i pick F2..
>> > i can not pick - change axis they are frozen .
>> > Every time click on F2 result in motion of X axis and fallowing error.
>> -can
>> > not change axis - nothing - all axis are -frozen
>> > i pick MDI and i can not type in nothing it froze also.
>> > 
>> > does any one have similar situation with 2.6.4?
>> >
>> > i burn it of DVD - how i can verify that it is good copy?
>>
>>
>> Did you copy your working hal and ini files to the new system
>> and launch linuxcnc using your working files?
>>
>> >
>> > thanks
>> > aram
>> >
>> --
>> > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>> > from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>> > with Interactivity, Sharing, Native Excel Exports, App Integration &
>> more
>> > Get technology previously reserved for billion-dollar corporations, FREE
>> >
>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
>> > ___
>> > Emc-users mailing list
>> > Emc-users@lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/emc-users
>> >
>>
>> Peter Wallace
>> Mesa Electronics
>>
>> (\__/)
>> (='.'=) This is Bunny. Copy and paste bunny into your
>> (")_(") signature to help him gain world domination.
>>
>>
>>
>> --
>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>> with Interactivity, Sharing, Native Excel Exports, App Integration & more
>> Get technology previously reserved for billion-dollar corporations, FREE
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[John Prentice (FS)]

Aram

See below

Problem is that when i click F1 - off e-stop, i should be able to pick axis
-- X Y Z, able to type in in MDI , AND after i push F2 machine power up and
after i click on Y axis jog - (any increment ) tham machine should move.
that is how 2.5.4  works on my computer.
And on my computer for 2.6.4 nothig is same.
in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are frozen
not pickable, and i can open MDI but i CAN NOT type there anything.
--

I do not know what you mean by "pick axis -- X, Y, Z" but your workflow with
f1 and f2 is unusual.

Most people clear the Reset/Estop (f1) and the immediately "Power up the
control" (f2). Then you can Home, issue MDI commands, keyboard jog etc.
Attempting anything before Power Up (f2) is not expected to work - perhaps
some things did with 2.5.4 and this is the confusion. I don't have a setup
to try this at present.

2.6.4 works fine for me (using the f1, f2 workflow described above).

John Prentice



--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

all works ok on 2.5.4 than why it does not work for 2.6.5?
if problem with key board than why it work for 2.5.4?

On Sun, Nov 23, 2014 at 7:44 PM, Gene Heskett  wrote:

> On Sunday 23 November 2014 14:12:38 a k did opine
> And Gene did reply:
> > hi
> > i try and got same problem with live CD no installation--
> > even without any installation.
> > than i try 2.5.4 and total different result.
> > Problem is that when i click F1 - off e-stop, i should be able to pick
> > axis -- X Y Z, able to type in in MDI , AND after i push F2 machine
> > power up and after i click on Y axis jog - (any increment ) tham
> > machine should move. that is how 2.5.4  works on my computer.
> > And on my computer for 2.6.4 nothig is same.
> > in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are
> > frozen not pickable, and i can open MDI but i CAN NOT type there
> > anything.
> >
> > Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
> > same result as with 2.6.4-- no difference.
> >
> > it can not be that only i have this problem. maybe not many try 2.6.5
> > why do i have this problem?
>
> Because, since I have been using LCNC, starting at about 2.0.0 it has
> always been a 2 step process to enable the machinery.
>
> You have always had to press F1 once and F2 once, F1 gets it out of its
> default e-stop startup, but it then takes an F2 press to actually enable
> the machine.
>
> Be aware that many modern keyboards now default to an Fkey disabled state
> at powerup.  You can identify those keyboards by their having a key or
> button labeled F, which when pressed, will enable the Fkeys until the next
> power up, or they can be disabled again by a second tap on the F key.
>
> > On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace 
> wrote:
> > > On Sat, 22 Nov 2014, a k wrote:
> > > > Date: Sat, 22 Nov 2014 16:04:20 -0800
> > > > From: a k 
> > > > Reply-To: "Enhanced Machine Controller (EMC)"
> > > >
> > > > 
> > > >
> > > > To: "Enhanced Machine Controller (EMC)"
> > > >  > > >
> > > > Subject: [Emc-users] 2.6.4---2.5.4
> > > >
> > > > hi
> > > > i fund that i have bigger problem.
> > > > 2.6.4 does not work as 2.5.4
> > > > i just check before typing this
> > > >
> > > > When i start 2.5.4 - open CNC (my is 5i20)
> > > > than F1, and F2.
> > > > after that i can pick axis like X Y Z  and pick increment
> > > >
> > > > with 2.6.4 it does not work like that
> > > > Here is how it works on my computer
> > > > Pick interface. mesa- 5i20
> > > > CNC open
> > > > than F1.
> > > > than F2 - and when i pick F2 machine start move on continues feed
> > > > every time i pick F2..
> > > > i can not pick - change axis they are frozen .
> > > > Every time click on F2 result in motion of X axis and fallowing
> > > > error.
> > >
> > > -can
> > >
> > > > not change axis - nothing - all axis are -frozen
> > > > i pick MDI and i can not type in nothing it froze also.
> > > > 
> > > > does any one have similar situation with 2.6.4?
> > > >
> Not here.  This makes me ask what keyboard emulation you are using?
>
> Its within the realm of possible that the wrong keyboard translation is
> doing something it should not be done, but that is just a SWAG on my part.
>
> > > > i burn it of DVD - how i can verify that it is good copy?
>
> I believe the site where you downloaded the disk image from should have a
> downloadable md5sum or possibly an sha1sum and doing the same sum
> operation on your disk would prove its integrity.
> .
> > > Did you copy your working hal and ini files to the new system
> > > and launch linuxcnc using your working files?
> > >
>
> This is very important, if not you will have to start the configuration
> from scratch.
>
> > > > thanks
> > > > aram
> > >
> > > -
> > > -
> > >
> > > > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> > > > from Actuate! Instantly Supercharge Your Business Reports and
> > > > Dashboards with Interactivity, Sharing, Native Excel Exports, App
> > > > Integration & more Get technology previously re

Re: [Emc-users] 2.6.4---2.5.4

[John Thornton]

I have 2.5.4 and 2.6 and in Axis both behave correctly, MDI is not 
allowed with power off.

On 11/23/2014 1:12 PM, a k wrote:
> hi
> i try and got same problem with live CD no installation--
> even without any installation.
> than i try 2.5.4 and total different result.
> Problem is that when i click F1 - off e-stop, i should be able to pick axis
> -- X Y Z, able to type in in MDI , AND after i push F2 machine power up and
> after i click on Y axis jog - (any increment ) tham machine should move.
> that is how 2.5.4  works on my computer.
> And on my computer for 2.6.4 nothig is same.
> in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are frozen
> not pickable, and i can open MDI but i CAN NOT type there anything.
>
> Yesterday i did see that 2.6.5 -- already there. i copy it and try it. same
> result as with 2.6.4-- no difference.
>
> it can not be that only i have this problem. maybe not many try 2.6.5
> why do i have this problem?
>
>
>
>
> On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace  wrote:
>
>> On Sat, 22 Nov 2014, a k wrote:
>>
>>> Date: Sat, 22 Nov 2014 16:04:20 -0800
>>> From: a k 
>>> Reply-To: "Enhanced Machine Controller (EMC)"
>>>  
>>> To: "Enhanced Machine Controller (EMC)" >>
>>> Subject: [Emc-users] 2.6.4---2.5.4
>>>
>>> hi
>>> i fund that i have bigger problem.
>>> 2.6.4 does not work as 2.5.4
>>> i just check before typing this
>>>
>>> When i start 2.5.4 - open CNC (my is 5i20)
>>> than F1, and F2.
>>> after that i can pick axis like X Y Z  and pick increment
>>>
>>> with 2.6.4 it does not work like that
>>> Here is how it works on my computer
>>> Pick interface. mesa- 5i20
>>> CNC open
>>> than F1.
>>> than F2 - and when i pick F2 machine start move on continues feed every
>>> time i pick F2..
>>> i can not pick - change axis they are frozen .
>>> Every time click on F2 result in motion of X axis and fallowing error.
>> -can
>>> not change axis - nothing - all axis are -frozen
>>> i pick MDI and i can not type in nothing it froze also.
>>> 
>>> does any one have similar situation with 2.6.4?
>>>
>>> i burn it of DVD - how i can verify that it is good copy?
>>
>> Did you copy your working hal and ini files to the new system
>> and launch linuxcnc using your working files?
>>
>>> thanks
>>> aram
>>>
>> --
>>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>>> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>>> with Interactivity, Sharing, Native Excel Exports, App Integration & more
>>> Get technology previously reserved for billion-dollar corporations, FREE
>>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
>>> ___
>>> Emc-users mailing list
>>> Emc-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>
>> Peter Wallace
>> Mesa Electronics
>>
>> (\__/)
>> (='.'=) This is Bunny. Copy and paste bunny into your
>> (")_(") signature to help him gain world domination.
>>
>>
>>
>> --
>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>> with Interactivity, Sharing, Native Excel Exports, App Integration & more
>> Get technology previously reserved for billion-dollar corporations, FREE
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> __

Re: [Emc-users] 2.6.4---2.5.4

[a k]

just now i put 5i20 board into computer that i brought with me to my first
linuxcnc work shop in 2006 and start live CD 2.6.5 and i got error
//

Removing HAL_LIB, RTAPI, and Real Time OS modules

Removing NML shared memory segments

Debug file information:

Error: could not insert module
/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hm2_pci.ko: No such device

hm2-servo.hal:46: exit value: 1

hm2-servo.hal:46: insmod failed, returned -1

See the output of 'dmesg' for more information.

4511

PID TTY STAT TIME COMMAND

Stopping realtime threads

Unloading hal components


 Kernel message information:

[ 0.00] Initializing cgroup subsys cpuset

[ 0.00] Initializing cgroup subsys cpu

[ 0.00] Linux v



what this error indicate?


thank you

aram




On Sun, Nov 23, 2014 at 8:43 PM, John Thornton  wrote:

> I have 2.5.4 and 2.6 and in Axis both behave correctly, MDI is not
> allowed with power off.
>
> On 11/23/2014 1:12 PM, a k wrote:
> > hi
> > i try and got same problem with live CD no installation--
> > even without any installation.
> > than i try 2.5.4 and total different result.
> > Problem is that when i click F1 - off e-stop, i should be able to pick
> axis
> > -- X Y Z, able to type in in MDI , AND after i push F2 machine power up
> and
> > after i click on Y axis jog - (any increment ) tham machine should move.
> > that is how 2.5.4  works on my computer.
> > And on my computer for 2.6.4 nothig is same.
> > in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are
> frozen
> > not pickable, and i can open MDI but i CAN NOT type there anything.
> >
> > Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
> same
> > result as with 2.6.4-- no difference.
> >
> > it can not be that only i have this problem. maybe not many try 2.6.5
> > why do i have this problem?
> >
> >
> >
> >
> > On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace 
> wrote:
> >
> >> On Sat, 22 Nov 2014, a k wrote:
> >>
> >>> Date: Sat, 22 Nov 2014 16:04:20 -0800
> >>> From: a k 
> >>> Reply-To: "Enhanced Machine Controller (EMC)"
> >>>  
> >>> To: "Enhanced Machine Controller (EMC)" <
> emc-users@lists.sourceforge.net
> >>>
> >>> Subject: [Emc-users] 2.6.4---2.5.4
> >>>
> >>> hi
> >>> i fund that i have bigger problem.
> >>> 2.6.4 does not work as 2.5.4
> >>> i just check before typing this
> >>>
> >>> When i start 2.5.4 - open CNC (my is 5i20)
> >>> than F1, and F2.
> >>> after that i can pick axis like X Y Z  and pick increment
> >>>
> >>> with 2.6.4 it does not work like that
> >>> Here is how it works on my computer
> >>> Pick interface. mesa- 5i20
> >>> CNC open
> >>> than F1.
> >>> than F2 - and when i pick F2 machine start move on continues feed every
> >>> time i pick F2..
> >>> i can not pick - change axis they are frozen .
> >>> Every time click on F2 result in motion of X axis and fallowing error.
> >> -can
> >>> not change axis - nothing - all axis are -frozen
> >>> i pick MDI and i can not type in nothing it froze also.
> >>> 
> >>> does any one have similar situation with 2.6.4?
> >>>
> >>> i burn it of DVD - how i can verify that it is good copy?
> >>
> >> Did you copy your working hal and ini files to the new system
> >> and launch linuxcnc using your working files?
> >>
> >>> thanks
> >>> aram
> >>>
> >>
> --
> >>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> >>> from Actuate! Instantly Supercharge Your Business Reports and
> Dashboards
> >>> with Interactivity, Sharing, Native Excel Exports, App Integration &
> more
> >>> Get technology previously reserved for billion-dollar corporations,
> FREE
> >>>
> >>
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> >>> ___
> >>> Emc-users mailing list
> >>> Emc-users@lists.sourceforge.net
> >>> https://lists.sourceforge.net/lists/listinfo/emc-users
> >>>
> 

Re: [Emc-users] 2.6.4---2.5.4

[a k]

hm2_pci.ko: No such device
means that linuxcnc can not see 5i20 board?
but it is there
and with 2.5.4 linuxcnc can see the same  board


On Sun, Nov 23, 2014 at 9:06 PM, a k  wrote:

> just now i put 5i20 board into computer that i brought with me to my first
> linuxcnc work shop in 2006 and start live CD 2.6.5 and i got error
> //
>
> Removing HAL_LIB, RTAPI, and Real Time OS modules
>
> Removing NML shared memory segments
>
> Debug file information:
>
> Error: could not insert module
> /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hm2_pci.ko: No such device
>
> hm2-servo.hal:46: exit value: 1
>
> hm2-servo.hal:46: insmod failed, returned -1
>
> See the output of 'dmesg' for more information.
>
> 4511
>
> PID TTY STAT TIME COMMAND
>
> Stopping realtime threads
>
> Unloading hal components
>
>
>  Kernel message information:
>
> [ 0.00] Initializing cgroup subsys cpuset
>
> [ 0.00] Initializing cgroup subsys cpu
>
> [ 0.00] Linux v
>
> 
>
> what this error indicate?
>
>
> thank you
>
> aram
>
>
>
>
> On Sun, Nov 23, 2014 at 8:43 PM, John Thornton  wrote:
>
>> I have 2.5.4 and 2.6 and in Axis both behave correctly, MDI is not
>> allowed with power off.
>>
>> On 11/23/2014 1:12 PM, a k wrote:
>> > hi
>> > i try and got same problem with live CD no installation--
>> > even without any installation.
>> > than i try 2.5.4 and total different result.
>> > Problem is that when i click F1 - off e-stop, i should be able to pick
>> axis
>> > -- X Y Z, able to type in in MDI , AND after i push F2 machine power up
>> and
>> > after i click on Y axis jog - (any increment ) tham machine should move.
>> > that is how 2.5.4  works on my computer.
>> > And on my computer for 2.6.4 nothig is same.
>> > in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are
>> frozen
>> > not pickable, and i can open MDI but i CAN NOT type there anything.
>> >
>> > Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
>> same
>> > result as with 2.6.4-- no difference.
>> >
>> > it can not be that only i have this problem. maybe not many try 2.6.5
>> > why do i have this problem?
>> >
>> >
>> >
>> >
>> > On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace 
>> wrote:
>> >
>> >> On Sat, 22 Nov 2014, a k wrote:
>> >>
>> >>> Date: Sat, 22 Nov 2014 16:04:20 -0800
>> >>> From: a k 
>> >>> Reply-To: "Enhanced Machine Controller (EMC)"
>> >>>  
>> >>> To: "Enhanced Machine Controller (EMC)" <
>> emc-users@lists.sourceforge.net
>> >>>
>> >>> Subject: [Emc-users] 2.6.4---2.5.4
>> >>>
>> >>> hi
>> >>> i fund that i have bigger problem.
>> >>> 2.6.4 does not work as 2.5.4
>> >>> i just check before typing this
>> >>>
>> >>> When i start 2.5.4 - open CNC (my is 5i20)
>> >>> than F1, and F2.
>> >>> after that i can pick axis like X Y Z  and pick increment
>> >>>
>> >>> with 2.6.4 it does not work like that
>> >>> Here is how it works on my computer
>> >>> Pick interface. mesa- 5i20
>> >>> CNC open
>> >>> than F1.
>> >>> than F2 - and when i pick F2 machine start move on continues feed
>> every
>> >>> time i pick F2..
>> >>> i can not pick - change axis they are frozen .
>> >>> Every time click on F2 result in motion of X axis and fallowing error.
>> >> -can
>> >>> not change axis - nothing - all axis are -frozen
>> >>> i pick MDI and i can not type in nothing it froze also.
>> >>> 
>> >>> does any one have similar situation with 2.6.4?
>> >>>
>> >>> i burn it of DVD - how i can verify that it is good copy?
>> >>
>> >> Did you copy your working hal and ini files to the new system
>> >> and launch linuxcnc using your working files?
>> >>
>> >>> thanks
>> >>> aram
>> >>>
>> >>
>> --
>> >>> Download BIRT iHub F-Type - The Free 

Re: [Emc-users] 2.6.4---2.5.4

[a k]

i did move 5i20 to the next PCI port and 2.6.5 work ok.
i just do not know what cause to 2.6.5 to start to work ok?
maybe because it use quantum mechanic -- nothing happen for sure, it only
has high probability that it will happen.

On Sun, Nov 23, 2014 at 9:11 PM, a k  wrote:

> hm2_pci.ko: No such device
> means that linuxcnc can not see 5i20 board?
> but it is there
> and with 2.5.4 linuxcnc can see the same  board
>
>
> On Sun, Nov 23, 2014 at 9:06 PM, a k  wrote:
>
>> just now i put 5i20 board into computer that i brought with me to my
>> first linuxcnc work shop in 2006 and start live CD 2.6.5 and i got error
>> //
>>
>> Removing HAL_LIB, RTAPI, and Real Time OS modules
>>
>> Removing NML shared memory segments
>>
>> Debug file information:
>>
>> Error: could not insert module
>> /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hm2_pci.ko: No such device
>>
>> hm2-servo.hal:46: exit value: 1
>>
>> hm2-servo.hal:46: insmod failed, returned -1
>>
>> See the output of 'dmesg' for more information.
>>
>> 4511
>>
>> PID TTY STAT TIME COMMAND
>>
>> Stopping realtime threads
>>
>> Unloading hal components
>>
>>
>>  Kernel message information:
>>
>> [ 0.00] Initializing cgroup subsys cpuset
>>
>> [ 0.00] Initializing cgroup subsys cpu
>>
>> [ 0.00] Linux v
>>
>> 
>>
>> what this error indicate?
>>
>>
>> thank you
>>
>> aram
>>
>>
>>
>>
>> On Sun, Nov 23, 2014 at 8:43 PM, John Thornton  wrote:
>>
>>> I have 2.5.4 and 2.6 and in Axis both behave correctly, MDI is not
>>> allowed with power off.
>>>
>>> On 11/23/2014 1:12 PM, a k wrote:
>>> > hi
>>> > i try and got same problem with live CD no installation--
>>> > even without any installation.
>>> > than i try 2.5.4 and total different result.
>>> > Problem is that when i click F1 - off e-stop, i should be able to pick
>>> axis
>>> > -- X Y Z, able to type in in MDI , AND after i push F2 machine power
>>> up and
>>> > after i click on Y axis jog - (any increment ) tham machine should
>>> move.
>>> > that is how 2.5.4  works on my computer.
>>> > And on my computer for 2.6.4 nothig is same.
>>> > in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are
>>> frozen
>>> > not pickable, and i can open MDI but i CAN NOT type there anything.
>>> >
>>> > Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
>>> same
>>> > result as with 2.6.4-- no difference.
>>> >
>>> > it can not be that only i have this problem. maybe not many try 2.6.5
>>> > why do i have this problem?
>>> >
>>> >
>>> >
>>> >
>>> > On Sun, Nov 23, 2014 at 7:00 AM, Peter C. Wallace 
>>> wrote:
>>> >
>>> >> On Sat, 22 Nov 2014, a k wrote:
>>> >>
>>> >>> Date: Sat, 22 Nov 2014 16:04:20 -0800
>>> >>> From: a k 
>>> >>> Reply-To: "Enhanced Machine Controller (EMC)"
>>> >>>  
>>> >>> To: "Enhanced Machine Controller (EMC)" <
>>> emc-users@lists.sourceforge.net
>>> >>>
>>> >>> Subject: [Emc-users] 2.6.4---2.5.4
>>> >>>
>>> >>> hi
>>> >>> i fund that i have bigger problem.
>>> >>> 2.6.4 does not work as 2.5.4
>>> >>> i just check before typing this
>>> >>>
>>> >>> When i start 2.5.4 - open CNC (my is 5i20)
>>> >>> than F1, and F2.
>>> >>> after that i can pick axis like X Y Z  and pick increment
>>> >>>
>>> >>> with 2.6.4 it does not work like that
>>> >>> Here is how it works on my computer
>>> >>> Pick interface. mesa- 5i20
>>> >>> CNC open
>>> >>> than F1.
>>> >>> than F2 - and when i pick F2 machine start move on continues feed
>>> every
>>> >>> time i pick F2..
>>> >>> i can not pick - change axis they are frozen .
>>> >>> Every time click on F2 result in motion of X axis and fallowing
>>> error.
>>> >> -can
>>> >>> not

Re: [Emc-users] 2.6.4---2.5.4

[Peter C. Wallace]

On Sun, 23 Nov 2014, a k wrote:

> Date: Sun, 23 Nov 2014 11:12:38 -0800
> From: a k 
> Reply-To: "Enhanced Machine Controller (EMC)"
> 
> To: "Enhanced Machine Controller (EMC)" 
> Subject: Re: [Emc-users] 2.6.4---2.5.4
> 
> hi
> i try and got same problem with live CD no installation--
> even without any installation.
> than i try 2.5.4 and total different result.
> Problem is that when i click F1 - off e-stop, i should be able to pick axis
> -- X Y Z, able to type in in MDI , AND after i push F2 machine power up and
> after i click on Y axis jog - (any increment ) tham machine should move.
> that is how 2.5.4  works on my computer.
> And on my computer for 2.6.4 nothig is same.
> in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are frozen
> not pickable, and i can open MDI but i CAN NOT type there anything.
>
> Yesterday i did see that 2.6.5 -- already there. i copy it and try it. same
> result as with 2.6.4-- no difference.
>
> it can not be that only i have this problem. maybe not many try 2.6.5
> why do i have this problem?


You did not answer my question, which was:

Did you copy your original working configuration files from your workin 
machine to the new 2.6.4 installation?



Peter Wallace
Mesa Electronics

--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[Andrew]

2014-11-23 23:46 GMT+02:00 a k :

> i did move 5i20 to the next PCI port and 2.6.5 work ok.
> i just do not know what cause to 2.6.5 to start to work ok?
> maybe because it use quantum mechanic -- nothing happen for sure, it only
> has high probability that it will happen.
>
> I have D525MW motherboard which does not see 5i25 card. Too bad it has
only one PCI slot.
I should try Ubuntu on that D525MW instead of Debian... who knows.

--
Andrew
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

I did many things.
first i open Hal and type everything in manually.
when it did not work i reload 2.6.4 and type all my changes again.
third time i copy my changes alteration to HAL to file and that just copy
past them to do it faster.
but now i can see that that 2.6.5 works i will do it again and i will type
everything manually

On Sun, Nov 23, 2014 at 9:50 PM, Peter C. Wallace  wrote:

> On Sun, 23 Nov 2014, a k wrote:
>
> > Date: Sun, 23 Nov 2014 11:12:38 -0800
> > From: a k 
> > Reply-To: "Enhanced Machine Controller (EMC)"
> > 
> > To: "Enhanced Machine Controller (EMC)"  >
> > Subject: Re: [Emc-users] 2.6.4---2.5.4
> >
> > hi
> > i try and got same problem with live CD no installation--
> > even without any installation.
> > than i try 2.5.4 and total different result.
> > Problem is that when i click F1 - off e-stop, i should be able to pick
> axis
> > -- X Y Z, able to type in in MDI , AND after i push F2 machine power up
> and
> > after i click on Y axis jog - (any increment ) tham machine should move.
> > that is how 2.5.4  works on my computer.
> > And on my computer for 2.6.4 nothig is same.
> > in live CD - F1 - e-stop off ,and i can no pick axis X Y Z they are
> frozen
> > not pickable, and i can open MDI but i CAN NOT type there anything.
> >
> > Yesterday i did see that 2.6.5 -- already there. i copy it and try it.
> same
> > result as with 2.6.4-- no difference.
> >
> > it can not be that only i have this problem. maybe not many try 2.6.5
> > why do i have this problem?
>
>
> You did not answer my question, which was:
>
> Did you copy your original working configuration files from your workin
> machine to the new 2.6.4 installation?
>
>
>
> Peter Wallace
> Mesa Electronics
>
>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[Peter C. Wallace]

On Sun, 23 Nov 2014, Andrew wrote:

> Date: Sun, 23 Nov 2014 23:54:16 +0200
> From: Andrew 
> Reply-To: "Enhanced Machine Controller (EMC)"
> 
> To: "Enhanced Machine Controller (EMC)" 
> Subject: Re: [Emc-users] 2.6.4---2.5.4
> 
> 2014-11-23 23:46 GMT+02:00 a k :
>
>> i did move 5i20 to the next PCI port and 2.6.5 work ok.
>> i just do not know what cause to 2.6.5 to start to work ok?
>> maybe because it use quantum mechanic -- nothing happen for sure, it only
>> has high probability that it will happen.
>>
>> I have D525MW motherboard which does not see 5i25 card. Too bad it has
> only one PCI slot.
> I should try Ubuntu on that D525MW instead of Debian... who knows.
>
> --
> Andrew


If a PCI card is not detected, it very often is because either the contact 
fingers or slot contacts are dirty (this is especiall true of slota on  a 
motherboard that have been unused for a long time)

I find the cleaning the PCI card and slot with 99% Isopropyl alcohol often 
fixes the problem. To clean the slot I dip a piece of card stock into the 
alcohol and insert/remove it several times


> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

Hi
i am not out of woods- so far.

i did move boards and narrow the problem.
1st  i did put 5i20 --ONLY -- and system works as normal.
2nd i did connect Y axis driver- to the system - To y axis motor drive
 --and system works as normal.
I did connect Y axis to X axis motor drive and system --as normal.
I did connect Y axis to Z axis motor drive and system --as normal

when i Try to connect X or Z axis to the any motor drive -- system
instantly change behavior -- axis froze and not click-able -- and after F2
axis X or Z try to move automatically by them self and instantly ERROR show
up.


So , conclusion -- there are big difference between Y axis and axis X  and
Z.

i noticed that in the end HAL file it show that Y axis different from X and
Z axis.
why Y is different from X and Z and what to do with my problem?

thank you
aram



On Sun, Nov 23, 2014 at 2:15 PM, Peter C. Wallace  wrote:

> On Sun, 23 Nov 2014, Andrew wrote:
>
> > Date: Sun, 23 Nov 2014 23:54:16 +0200
> > From: Andrew 
> > Reply-To: "Enhanced Machine Controller (EMC)"
> > 
> > To: "Enhanced Machine Controller (EMC)"  >
> > Subject: Re: [Emc-users] 2.6.4---2.5.4
> >
> > 2014-11-23 23:46 GMT+02:00 a k :
> >
> >> i did move 5i20 to the next PCI port and 2.6.5 work ok.
> >> i just do not know what cause to 2.6.5 to start to work ok?
> >> maybe because it use quantum mechanic -- nothing happen for sure, it
> only
> >> has high probability that it will happen.
> >>
> >> I have D525MW motherboard which does not see 5i25 card. Too bad it has
> > only one PCI slot.
> > I should try Ubuntu on that D525MW instead of Debian... who knows.
> >
> > --
> > Andrew
>
>
> If a PCI card is not detected, it very often is because either the contact
> fingers or slot contacts are dirty (this is especiall true of slota on  a
> motherboard that have been unused for a long time)
>
> I find the cleaning the PCI card and slot with 99% Isopropyl alcohol often
> fixes the problem. To clean the slot I dip a piece of card stock into the
> alcohol and insert/remove it several times
>
>
> >
> --
> > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> > from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> > with Interactivity, Sharing, Native Excel Exports, App Integration & more
> > Get technology previously reserved for billion-dollar corporations, FREE
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
>
> Peter Wallace
> Mesa Electronics
>
> (\__/)
> (='.'=) This is Bunny. Copy and paste bunny into your
> (")_(") signature to help him gain world domination.
>
>
>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[Peter C. Wallace]

On Mon, 24 Nov 2014, a k wrote:

> Date: Mon, 24 Nov 2014 13:29:12 -0800
> From: a k 
> Reply-To: "Enhanced Machine Controller (EMC)"
> 
> To: "Enhanced Machine Controller (EMC)" 
> Subject: Re: [Emc-users] 2.6.4---2.5.4
> 
> Hi
> i am not out of woods- so far.
>
> i did move boards and narrow the problem.
> 1st  i did put 5i20 --ONLY -- and system works as normal.
> 2nd i did connect Y axis driver- to the system - To y axis motor drive
> --and system works as normal.
> I did connect Y axis to X axis motor drive and system --as normal.
> I did connect Y axis to Z axis motor drive and system --as normal
>
> when i Try to connect X or Z axis to the any motor drive -- system
> instantly change behavior -- axis froze and not click-able -- and after F2
> axis X or Z try to move automatically by them self and instantly ERROR show
> up.
>
>
> So , conclusion -- there are big difference between Y axis and axis X  and
> Z.
>
> i noticed that in the end HAL file it show that Y axis different from X and
> Z axis.
> why Y is different from X and Z and what to do with my problem?
>
> thank you

Are you using the _exact_ same .hal  and .ini files copied (via usb 
drive or some other reliable method) from your working 2.5.4 installation?



Peter Wallace
Mesa Electronics

--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

No
i use live CD 2.6.4  i did not touch any HAL
Just start live CD 2.6.4 and when Y axis motor connected to the system ,
system works
when i connect Z or X axis - all problem that i described show up again

On Mon, Nov 24, 2014 at 1:57 PM, Peter C. Wallace  wrote:

> On Mon, 24 Nov 2014, a k wrote:
>
> > Date: Mon, 24 Nov 2014 13:29:12 -0800
> > From: a k 
> > Reply-To: "Enhanced Machine Controller (EMC)"
> > 
> > To: "Enhanced Machine Controller (EMC)"  >
> > Subject: Re: [Emc-users] 2.6.4---2.5.4
> >
> > Hi
> > i am not out of woods- so far.
> >
> > i did move boards and narrow the problem.
> > 1st  i did put 5i20 --ONLY -- and system works as normal.
> > 2nd i did connect Y axis driver- to the system - To y axis motor
> drive
> > --and system works as normal.
> > I did connect Y axis to X axis motor drive and system --as normal.
> > I did connect Y axis to Z axis motor drive and system --as normal
> >
> > when i Try to connect X or Z axis to the any motor drive -- system
> > instantly change behavior -- axis froze and not click-able -- and after
> F2
> > axis X or Z try to move automatically by them self and instantly ERROR
> show
> > up.
> >
> >
> > So , conclusion -- there are big difference between Y axis and axis X
> and
> > Z.
> >
> > i noticed that in the end HAL file it show that Y axis different from X
> and
> > Z axis.
> > why Y is different from X and Z and what to do with my problem?
> >
> > thank you
>
> Are you using the _exact_ same .hal  and .ini files copied (via usb
> drive or some other reliable method) from your working 2.5.4 installation?
>
>
>
> Peter Wallace
> Mesa Electronics
>
>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

axis y is different than axis x z in 2.6.4
when it move from 2.5.4 into 2.6.4 there should be something different in
axis setting --- y should be different from axis x and z

On Mon, Nov 24, 2014 at 2:24 PM, a k  wrote:

> No
> i use live CD 2.6.4  i did not touch any HAL
> Just start live CD 2.6.4 and when Y axis motor connected to the system ,
> system works
> when i connect Z or X axis - all problem that i described show up again
>
> On Mon, Nov 24, 2014 at 1:57 PM, Peter C. Wallace  wrote:
>
>> On Mon, 24 Nov 2014, a k wrote:
>>
>> > Date: Mon, 24 Nov 2014 13:29:12 -0800
>> > From: a k 
>> > Reply-To: "Enhanced Machine Controller (EMC)"
>> > 
>> > To: "Enhanced Machine Controller (EMC)" <
>> emc-users@lists.sourceforge.net>
>> > Subject: Re: [Emc-users] 2.6.4---2.5.4
>> >
>> > Hi
>> > i am not out of woods- so far.
>> >
>> > i did move boards and narrow the problem.
>> > 1st  i did put 5i20 --ONLY -- and system works as normal.
>> > 2nd i did connect Y axis driver- to the system - To y axis motor
>> drive
>> > --and system works as normal.
>> > I did connect Y axis to X axis motor drive and system --as normal.
>> > I did connect Y axis to Z axis motor drive and system --as normal
>> >
>> > when i Try to connect X or Z axis to the any motor drive -- system
>> > instantly change behavior -- axis froze and not click-able -- and after
>> F2
>> > axis X or Z try to move automatically by them self and instantly ERROR
>> show
>> > up.
>> >
>> >
>> > So , conclusion -- there are big difference between Y axis and axis X
>> and
>> > Z.
>> >
>> > i noticed that in the end HAL file it show that Y axis different from X
>> and
>> > Z axis.
>> > why Y is different from X and Z and what to do with my problem?
>> >
>> > thank you
>>
>> Are you using the _exact_ same .hal  and .ini files copied (via usb
>> drive or some other reliable method) from your working 2.5.4 installation?
>>
>>
>>
>> Peter Wallace
>> Mesa Electronics
>>
>>
>> --
>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>> with Interactivity, Sharing, Native Excel Exports, App Integration & more
>> Get technology previously reserved for billion-dollar corporations, FREE
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[andy pugh]

On 24 November 2014 at 22:24, a k  wrote:
> i use live CD 2.6.4  i did not touch any HAL

Then once again you are wasting everyone's time.


-- 
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto

--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[a k]

i use 2.6.4 live cd.
i did not touch hal or ini file
//
when i connect y axis motor drive -- system works ok.
when i connected y axis to motor drive axis  X or Y -- system works ok.
when i connected X or Z axis to any motor drive system stop work as a
normal.

/
maybe problem with motor-drive of x and z axis ?



On Mon, Nov 24, 2014 at 2:41 PM, andy pugh  wrote:

> On 24 November 2014 at 22:24, a k  wrote:
> > i use live CD 2.6.4  i did not touch any HAL
>
> Then once again you are wasting everyone's time.
>
>
> --
> atp
> If you can't fix it, you don't own it.
> http://www.ifixit.com/Manifesto
>
>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4---2.5.4

[Peter C. Wallace]

On Mon, 24 Nov 2014, a k wrote:

> Date: Mon, 24 Nov 2014 14:59:47 -0800
> From: a k 
> Reply-To: "Enhanced Machine Controller (EMC)"
> 
> To: "Enhanced Machine Controller (EMC)" 
> Subject: Re: [Emc-users] 2.6.4---2.5.4
> 
> i use 2.6.4 live cd.
> i did not touch hal or ini file
> //
> when i connect y axis motor drive -- system works ok.
> when i connected y axis to motor drive axis  X or Y -- system works ok.
> when i connected X or Z axis to any motor drive system stop work as a
> normal.
>
> /
> maybe problem with motor-drive of x and z axis ?
>


Which hal and ini files are you using?


If you are using the sample files that come with linuxcnc instead of your 
customized .hal and .ini files from your working 2.5.4 installation, You 
should not expect them to work.



>
>
> On Mon, Nov 24, 2014 at 2:41 PM, andy pugh  wrote:
>
>> On 24 November 2014 at 22:24, a k  wrote:
>>> i use live CD 2.6.4  i did not touch any HAL
>>
>> Then once again you are wasting everyone's time.
>>
>>
>> --
>> atp
>> If you can't fix it, you don't own it.
>> http://www.ifixit.com/Manifesto
>>
>>
>> --
>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>> with Interactivity, Sharing, Native Excel Exports, App Integration & more
>> Get technology previously reserved for billion-dollar corporations, FREE
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
> --
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] 2.6.4 to 2.6.7 update without a network connection?

[Gregg Eshelman]

Where do I download the update from 2.6.4 to 2.6.7 to sneakernet to a PC 
with the Debian Wheezy LCNC install?

I'm setting up a computer with a pair of hard drives, one for Linux and 
one for XP.

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com


--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4 to 2.6.7 update without a network connection?

[andy pugh]

On 28 March 2015 at 21:44, Gregg Eshelman  wrote:
> Where do I download the update from 2.6.4 to 2.6.7 to sneakernet to a PC
> with the Debian Wheezy LCNC install?

http://buildbot.linuxcnc.org/dists/wheezy/2.6-rt/binary-i386/

-- 
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] 2.6.4 to 2.6.7 update without a network connection?

[Sebastian Kuzminsky]

On 03/28/2015 04:43 PM, andy pugh wrote:
> On 28 March 2015 at 21:44, Gregg Eshelman  wrote:
>> Where do I download the update from 2.6.4 to 2.6.7 to sneakernet to a PC
>> with the Debian Wheezy LCNC install?
> 
> http://buildbot.linuxcnc.org/dists/wheezy/2.6-rt/binary-i386/

That link has the interim builds of the 2.6 stable branch.  Actual
releases are here:

http://linuxcnc.org/dists/wheezy/2.6/binary-i386/


-- 
Sebastian Kuzminsky

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users