Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
John Thornton [EMAIL PROTECTED] writes: Eric, Why did you install the workstation version vs the standard one that comes packaged with EMC2? Les, Is there a version named workstation? Never heard of it. For the synaptic problem, maybe try apt-get check ? My install experience with Sheetcam has been all positive. Autopackage version on Ubuntu 8.0.4 worked 0.0.26 + 2.8.8 debs on Ubuntu 8.0.4 worked 0.0.24 + 2.8.7 debs on Ubuntu 6.0.6 worked 0.0.26 + 2.8.8 debs on Mepis 6.5 worked (KDE desktop btw) A couple of notes. The libs directory has broken symbolic links to /home/les.local. The set-up wizard loses it's settings whenever SheetCam is closed. The only exception is on 8.0.4 which has a Sheetcam.ini file in my home directory. Maybe it was left there by the autopackage install? Any specific other distros you would like tested? Having a blast with your app. :) -- --- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
John Thornton [EMAIL PROTECTED] writes: Eric, Why did you install the workstation version vs the standard one that comes packaged with EMC2? **Apologies if this is a repeat post. Sometimes this mailing list is a frustrating format.** Is there a version called workstation? Never heard of it. For the synaptic/apt problem maybe try apt-get check ? Forcing installs is not ideal. I have had zero failed Sheetcam installs so far. Autopackage on Ubuntu 8.0.4 worked. 0.0.26 + 2.8.8 debs on the same 8.0.4 worked. 0.0.24 + 2.8.7 debs on Ubuntu 6.0.6 worked. 0.0.26 + 2.8.8 debs on Mepis 6.5 worked. (KDE Desktop btw) A couple of issues: Broken symbolic links to /home/les/.local littered about in libs directory. Preferences are not saved between runs. The exception being 8.0.4 which has a SheetCam.ini file in the home directory. Maybe this file is leftover from the AutoPackage install? Having a blast with this app so far :) -- --- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Eric, I replied before but it didn't seem to get through. I think I have found a problem with the sheetcamlibs package. Try downloading and installing the sheetcamlibs package again. If you still get the error, open a terminal and enter the following: sudo dpkg --force-remove-reinstreq sheetcamlibs You will probably have to enter your password. Hopefully that should force dpkg to delete the package. Sorry about that, Les Eric H. Johnson wrote: Les, Sorry to report, but loading sheetcam seems to have severely affected packaging functions (apt-get, synaptic, etc). Both the packages sheetcamlibs and sheetcam installed with errors, but sheetcam itself seems to be working. The problem is, synaptic, apt-get, etc. now do not. I am running a fresh install of Ubuntu 6.06 workstation. The only other application installed since the install of the OS was EMC. If I run synaptic, or apt-get, I continually get the error E: The package sheetcamlibs needs to be reinstalled, but I cannot find an archive for it. It then prevents the installing, removing etc. of any other packages. Synaptic further gives an error of E: Internal error opening cache(1). Please report. Thereafter synaptic lists no packages and in the status bar shows: 0 packages listed, -1 installed, 0 broken. I have also been equally unsuccessful in removing sheetcamlibs and sheetcam, which again fail on the same message. Any advice appreciated. Regards, Eric I have just uploaded the Linux version of 0.0.24 to www.sheetcam.com. This release now comes as a Debian package (.deb). This covers all of the Debian derivatives such as Ubuntu, Knoppix etc. If you can't use .debs then let me know and I'll see what I can sort out. I do intend to support RPMs in the near future. In many distros, simply clicking on the package in your browser will install it. The Linux version comes as two packages, the libraries and the application files. The libraries (sheetcamlibs-2.8.7.deb) need to be installed first. Once they are installed you should not have to install them again for quite a while. The application, SheetCamTNG-0.0.24.deb will change with every release. If you already have the Autopackage version installed, here is how to uninstall it: Open a terminal. In Ubunto it is in Applications-Accessories-Terminal. Enter the following: package remove SheetCamTNG package remove wxlualibs package remove wxgtk If you want to remove Autopackage itself then enter: package remove autopackage package remove autopackage The first time removes the graphical front end, the second time removes Autopackage itself. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
That is good news. If you do break anything, please let me know. I'll sort out the extension problem in the next release. Thanks, Les John Thornton wrote: Les, I have been trying all the options and trying to break SheetCam TNG for linux but nothing has broken so far. The only thing I noticed so far is when saving the post it didn't tack on the .ngc extension. John - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Eric, I think I have found a problem with the sheetcamlibs package. Try downloading and installing the sheetcamlibs package again. If you still get the error, open a terminal and enter the following: sudo dpkg --force-remove-reinstreq sheetcamlibs You will probably have to enter your password. Hopefully that should force dpkg to delete the package. Sorry about that, Les Eric H. Johnson wrote: Les, Sorry to report, but loading sheetcam seems to have severely affected packaging functions (apt-get, synaptic, etc). Both the packages sheetcamlibs and sheetcam installed with errors, but sheetcam itself seems to be working. The problem is, synaptic, apt-get, etc. now do not. I am running a fresh install of Ubuntu 6.06 workstation. The only other application installed since the install of the OS was EMC. If I run synaptic, or apt-get, I continually get the error E: The package sheetcamlibs needs to be reinstalled, but I cannot find an archive for it. It then prevents the installing, removing etc. of any other packages. Synaptic further gives an error of E: Internal error opening cache(1). Please report. Thereafter synaptic lists no packages and in the status bar shows: 0 packages listed, -1 installed, 0 broken. I have also been equally unsuccessful in removing sheetcamlibs and sheetcam, which again fail on the same message. Any advice appreciated. Regards, Eric I have just uploaded the Linux version of 0.0.24 to www.sheetcam.com. This release now comes as a Debian package (.deb). This covers all of the Debian derivatives such as Ubuntu, Knoppix etc. If you can't use .debs then let me know and I'll see what I can sort out. I do intend to support RPMs in the near future. In many distros, simply clicking on the package in your browser will install it. The Linux version comes as two packages, the libraries and the application files. The libraries (sheetcamlibs-2.8.7.deb) need to be installed first. Once they are installed you should not have to install them again for quite a while. The application, SheetCamTNG-0.0.24.deb will change with every release. If you already have the Autopackage version installed, here is how to uninstall it: Open a terminal. In Ubunto it is in Applications-Accessories-Terminal. Enter the following: package remove SheetCamTNG package remove wxlualibs package remove wxgtk If you want to remove Autopackage itself then enter: package remove autopackage package remove autopackage The first time removes the graphical front end, the second time removes Autopackage itself. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Les, The new sheetcamlibs package did the trick. Both sheetcam and the packaging system seem to be working fine. Thanks, Eric I replied before but it didn't seem to get through. I think I have found a problem with the sheetcamlibs package. Try downloading and installing the sheetcamlibs package again. If you still get the error, open a terminal and enter the following: sudo dpkg --force-remove-reinstreq sheetcamlibs You will probably have to enter your password. Hopefully that should force dpkg to delete the package. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
John, It is my development system which is used for more things than just EMC. In fact I don't run EMC from this machine other than testing, it is only used to compile from source. Regards, Eric Why did you install the workstation version vs the standard one that comes packaged with EMC2? - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Les, I have been trying all the options and trying to break SheetCam TNG for linux but nothing has broken so far. The only thing I noticed so far is when saving the post it didn't tack on the .ngc extension. John - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
I am glad that fixed it. It is slightly embarassing to release something that mungs people's machines :-[ LEs Eric H. Johnson wrote: Les, The new sheetcamlibs package did the trick. Both sheetcam and the packaging system seem to be working fine. Thanks, Eric - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Even I got installed and working! Thanks for putting in the time and trouble. It really looks nice. Planning to play with it tomorrow. Emory On Sat, Jun 21, 2008 at 3:50 PM, Leslie Newell [EMAIL PROTECTED] wrote: I am glad that fixed it. It is slightly embarassing to release something that mungs people's machines :-[ LEs Eric H. Johnson wrote: Les, The new sheetcamlibs package did the trick. Both sheetcam and the packaging system seem to be working fine. Thanks, Eric - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Emory Smith - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
I just checked on my system also, and sure enough, there is no extension on the g-code file. Again, this is on Ubuntu 8.04 Art At 10:31 AM 6/21/2008, you wrote: Les, I have been trying all the options and trying to break SheetCam TNG for linux but nothing has broken so far. The only thing I noticed so far is when saving the post it didn't tack on the .ngc extension. John - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Les, Sorry to report, but loading sheetcam seems to have severely affected packaging functions (apt-get, synaptic, etc). Both the packages sheetcamlibs and sheetcam installed with errors, but sheetcam itself seems to be working. The problem is, synaptic, apt-get, etc. now do not. I am running a fresh install of Ubuntu 6.06 workstation. The only other application installed since the install of the OS was EMC. If I run synaptic, or apt-get, I continually get the error E: The package sheetcamlibs needs to be reinstalled, but I cannot find an archive for it. It then prevents the installing, removing etc. of any other packages. Synaptic further gives an error of E: Internal error opening cache(1). Please report. Thereafter synaptic lists no packages and in the status bar shows: 0 packages listed, -1 installed, 0 broken. I have also been equally unsuccessful in removing sheetcamlibs and sheetcam, which again fail on the same message. Any advice appreciated. Regards, Eric I have just uploaded the Linux version of 0.0.24 to www.sheetcam.com. This release now comes as a Debian package (.deb). This covers all of the Debian derivatives such as Ubuntu, Knoppix etc. If you can't use .debs then let me know and I'll see what I can sort out. I do intend to support RPMs in the near future. In many distros, simply clicking on the package in your browser will install it. The Linux version comes as two packages, the libraries and the application files. The libraries (sheetcamlibs-2.8.7.deb) need to be installed first. Once they are installed you should not have to install them again for quite a while. The application, SheetCamTNG-0.0.24.deb will change with every release. If you already have the Autopackage version installed, here is how to uninstall it: Open a terminal. In Ubunto it is in Applications-Accessories-Terminal. Enter the following: package remove SheetCamTNG package remove wxlualibs package remove wxgtk If you want to remove Autopackage itself then enter: package remove autopackage package remove autopackage The first time removes the graphical front end, the second time removes Autopackage itself. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Eric, Why did you install the workstation version vs the standard one that comes packaged with EMC2? Les, I'm running the Ubuntu 6.06 that comes with EMC2 and sheet cam installs and works so far and doesn't seem to stomp on anything else. Please don't give up on your linux version. Thanks John On 20 Jun 2008 at 11:39, Eric H. Johnson wrote: Les, Sorry to report, but loading sheetcam seems to have severely affected packaging functions (apt-get, synaptic, etc). Both the packages sheetcamlibs and sheetcam installed with errors, but sheetcam itself seems to be working. The problem is, synaptic, apt-get, etc. now do not. I am running a fresh install of Ubuntu 6.06 workstation. The only other application installed since the install of the OS was EMC. If I run synaptic, or apt-get, I continually get the error E: The package sheetcamlibs needs to be reinstalled, but I cannot find an archive for it. It then prevents the installing, removing etc. of any other packages. Synaptic further gives an error of E: Internal error opening cache(1). Please report. Thereafter synaptic lists no packages and in the status bar shows: 0 packages listed, -1 installed, 0 broken. I have also been equally unsuccessful in removing sheetcamlibs and sheetcam, which again fail on the same message. Any advice appreciated. Regards, Eric I have just uploaded the Linux version of 0.0.24 to www.sheetcam.com. This release now comes as a Debian package (.deb). This covers all of the Debian derivatives such as Ubuntu, Knoppix etc. If you can't use .debs then let me know and I'll see what I can sort out. I do intend to support RPMs in the near future. In many distros, simply clicking on the package in your browser will install it. The Linux version comes as two packages, the libraries and the application files. The libraries (sheetcamlibs-2.8.7.deb) need to be installed first. Once they are installed you should not have to install them again for quite a while. The application, SheetCamTNG-0.0.24.deb will change with every release. If you already have the Autopackage version installed, here is how to uninstall it: Open a terminal. In Ubunto it is in Applications-Accessories-Terminal. Enter the following: package remove SheetCamTNG package remove wxlualibs package remove wxgtk If you want to remove Autopackage itself then enter: package remove autopackage package remove autopackage The first time removes the graphical front end, the second time removes Autopackage itself. -- --- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Les, The install went find on Ubuntu 6.06 here John On 18 Jun 2008 at 22:54, Leslie Newell wrote: Hi Kent, Most of the install issues have been with older versions. More recent Linux distributions are more standardised and easier to work with. With dialog boxes, the help is supposed to appear on the side of the window. It works reasonably well on Windows but Linux windows tend to be a lot more spread out so the help gets a bit big. Maybe that was one of those good ideas that doesn't work too well in practice. Les Kent A. Reed wrote: Les: It's interesting to see the problems some are running into. Starting with a fresh copy of Ubuntu 8.04LTS, I installed SheetCam TNG V0.0.23 last week using the autopackage. No problem. Last night, I followed your instructions and had no problem uninstalling V0.0.23 or installing V0.0.24. I understand your pushing sand up a hill with your nose metaphor (I have sometimes felt it was more like pushing sand up my nose with a hill) but the installs just worked for me. Once installed, however, SheetCam TNG V0.0.24 is doing some funky interleaving of various window panes when I invoke Help. I'll try to do a screen capture if you haven't seen the behavior already. Regards, Kent -- --- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
I've had enough. Won't install on 804. On Thu, Jun 19, 2008 at 8:34 AM, John Thornton [EMAIL PROTECTED] wrote: Hi Les, The install went find on Ubuntu 6.06 here John On 18 Jun 2008 at 22:54, Leslie Newell wrote: Hi Kent, Most of the install issues have been with older versions. More recent Linux distributions are more standardised and easier to work with. With dialog boxes, the help is supposed to appear on the side of the window. It works reasonably well on Windows but Linux windows tend to be a lot more spread out so the help gets a bit big. Maybe that was one of those good ideas that doesn't work too well in practice. Les Kent A. Reed wrote: Les: It's interesting to see the problems some are running into. Starting with a fresh copy of Ubuntu 8.04LTS, I installed SheetCam TNG V0.0.23 last week using the autopackage. No problem. Last night, I followed your instructions and had no problem uninstalling V0.0.23 or installing V0.0.24. I understand your pushing sand up a hill with your nose metaphor (I have sometimes felt it was more like pushing sand up my nose with a hill) but the installs just worked for me. Once installed, however, SheetCam TNG V0.0.24 is doing some funky interleaving of various window panes when I invoke Help. I'll try to do a screen capture if you haven't seen the behavior already. Regards, Kent -- --- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Emory Smith - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
What error message do you get? Les Emory Smith wrote: I've had enough. Won't install on 804. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Leslie Newell wrote: The Linux version comes as two packages, the libraries and the application files. The libraries (sheetcamlibs-2.8.7.deb) need to be installed first. Once they are installed you should not have to install them again for quite a while. The application, SheetCamTNG-0.0.24.deb will change with every release. Installing sheetcamlibs-2.8.7.deb on Ubuntu 7.0.4 I get the following message: /usr/lib/libwx_baseu-2.8.so.0', che si trova anche nel pacchetto libwxbase2.8-0 it seems that your package contains some file included in libwxbase2.8-0 that is already installed on my system. Note that I dont have previous version of sheetcam installed in my system. As quickdirty solution I forced the overwrite of offending files: dpkg --force-overwrite -i sheetcamlibs-2.8.7.deb Finally, I run the program: wow ! Many thanks for give to us (Linux-minded) this thing. *am* - Andrea Montefusco iw0hdvhttp://www.montefusco.com tel: +393356992791 fax: +390623318709 - - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Andrea, I had sort of expected that to happen somewhere along the line. The sheetcamlibs package is a bit of a bodge at the moment. I would have used the standard Ubuntu wx libs but they are not fully up to date, also they are not available at all for earlier versions of Ubuntu. I am not sure what is the best thing to do here. Sometimes working with Linux can be like trying to push sand up a hill with your nose :-( Thanks, Les Andrea Montefusco wrote: Installing sheetcamlibs-2.8.7.deb on Ubuntu 7.0.4 I get the following message: /usr/lib/libwx_baseu-2.8.so.0', che si trova anche nel pacchetto libwxbase2.8-0 it seems that your package contains some file included in libwxbase2.8-0 that is already installed on my system. Note that I dont have previous version of sheetcam installed in my system. As quickdirty solution I forced the overwrite of offending files: dpkg --force-overwrite -i sheetcamlibs-2.8.7.deb Finally, I run the program: wow ! Many thanks for give to us (Linux-minded) this thing. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Unpacking sheetcamtng (from SheetCamTNG-0.0.24.deb) ... dpkg-deb (subprocess): short read in buffer_copy (failed to write to pipe in copy) dpkg-deb: subprocess paste returned error exit status 2 dpkg: error processing SheetCamTNG-0.0.24.deb (--install): short read in buffer_copy (backend dpkg-deb during `./usr/share/SheetCamTNG/resources/Splash1.bmp') Errors were encountered while processing: SheetCamTNG-0.0.24.deb gdebi-gtk also gives a file corrupted error. Tried downloading the .deb files with Firefox AND wget. Same errors. The libs installed OK. Emory On Wed, Jun 18, 2008 at 8:59 AM, Leslie Newell [EMAIL PROTECTED] wrote: Hi Andrea, I had sort of expected that to happen somewhere along the line. The sheetcamlibs package is a bit of a bodge at the moment. I would have used the standard Ubuntu wx libs but they are not fully up to date, also they are not available at all for earlier versions of Ubuntu. I am not sure what is the best thing to do here. Sometimes working with Linux can be like trying to push sand up a hill with your nose :-( Thanks, Les Andrea Montefusco wrote: Installing sheetcamlibs-2.8.7.deb on Ubuntu 7.0.4 I get the following message: /usr/lib/libwx_baseu-2.8.so.0', che si trova anche nel pacchetto libwxbase2.8-0 it seems that your package contains some file included in libwxbase2.8-0 that is already installed on my system. Note that I dont have previous version of sheetcam installed in my system. As quickdirty solution I forced the overwrite of offending files: dpkg --force-overwrite -i sheetcamlibs-2.8.7.deb Finally, I run the program: wow ! Many thanks for give to us (Linux-minded) this thing. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Emory Smith - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Les, The library problem is always an issue. I used to produce a windows program that had to run on many different versions of windows. I finally ended up building statically linked executables. These contained all the necessary code and did not depend on the users run time environment. The distributed code is larger, but runs on a larger selection of O/S releases. Perhaps a statically linked linux project would work for sheetcam. cheers On Wed, 2008-06-18 at 14:59 +0100, Leslie Newell wrote: Hi Andrea, I had sort of expected that to happen somewhere along the line. The sheetcamlibs package is a bit of a bodge at the moment. I would have used the standard Ubuntu wx libs but they are not fully up to date, also they are not available at all for earlier versions of Ubuntu. I am not sure what is the best thing to do here. Sometimes working with Linux can be like trying to push sand up a hill with your nose :-( Thanks, Les Andrea Montefusco wrote: Installing sheetcamlibs-2.8.7.deb on Ubuntu 7.0.4 I get the following message: /usr/lib/libwx_baseu-2.8.so.0', che si trova anche nel pacchetto libwxbase2.8-0 it seems that your package contains some file included in libwxbase2.8-0 that is already installed on my system. Note that I dont have previous version of sheetcam installed in my system. As quickdirty solution I forced the overwrite of offending files: dpkg --force-overwrite -i sheetcamlibs-2.8.7.deb Finally, I run the program: wow ! Many thanks for give to us (Linux-minded) this thing. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- = Lawrence Glaister VE7IT mailto:[EMAIL PROTECTED] 1462 Madrona Drive Nanoose Bay, B.C.http://members.shaw.ca/swstuff Canada V9P 9C9 http://gspy.sourceforge.net = - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Lawrence, That is what I do for the original SheetCam. I can't do it for TNG because the plugins need to access the libraries at the same time. The wxWidgets docs specifically state that statically linking in this case won't work. I think I have found a way round the issue by having a private set of libraries and using LD_LIBRARY_PATH to override the system libs. It is a bit of a hack but it appears to work. Thanks, Les Lawrence Glaister wrote: Hi Les, The library problem is always an issue. I used to produce a windows program that had to run on many different versions of windows. I finally ended up building statically linked executables. These contained all the necessary code and did not depend on the users run time environment. The distributed code is larger, but runs on a larger selection of O/S releases. Perhaps a statically linked linux project would work for sheetcam. cheers - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Emory, Sorry about that. You caught me in the procsess of testing some changes. I have changed over to using a private set of libraries. Uninstall the existing sheetcamlibs then re-download and install both the libs and application. Hopefully it should now work. Les Emory Smith wrote: Unpacking sheetcamtng (from SheetCamTNG-0.0.24.deb) ... dpkg-deb (subprocess): short read in buffer_copy (failed to write to pipe in copy) dpkg-deb: subprocess paste returned error exit status 2 dpkg: error processing SheetCamTNG-0.0.24.deb (--install): short read in buffer_copy (backend dpkg-deb during `./usr/share/SheetCamTNG/resources/Splash1.bmp') Errors were encountered while processing: SheetCamTNG-0.0.24.deb gdebi-gtk also gives a file corrupted error. Tried downloading the .deb files with Firefox AND wget. Same errors. The libs installed OK. Emory - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Les, The Ubuntu wx libs are indeed out of date. I get my packages from http://apt.wxwidgets.org/ The line I use for Ubuntu Hardy 8.04 is: deb http://apt.wxwidgets.org/ gutsy-wx main These are the latest wx libs and the ones for 7.10 work fine on 8.04. They also have versions for different distributions of debian and ubuntu. You might be able to instruct the user to add the appropriate line to their software sources, or you may be able to write a small script to detect the distribution and add the correct line to the etc/apt/sources.list automatically. Check out this page for more information: http://wiki.wxpython.org/InstallingOnUbuntuOrDebian Moses On Wed, 2008-06-18 at 14:59 +0100, Leslie Newell wrote: Hi Andrea, I had sort of expected that to happen somewhere along the line. The sheetcamlibs package is a bit of a bodge at the moment. I would have used the standard Ubuntu wx libs but they are not fully up to date, also they are not available at all for earlier versions of Ubuntu. I am not sure what is the best thing to do here. Sometimes working with Linux can be like trying to push sand up a hill with your nose :-( Thanks, Les Andrea Montefusco wrote: Installing sheetcamlibs-2.8.7.deb on Ubuntu 7.0.4 I get the following message: /usr/lib/libwx_baseu-2.8.so.0', che si trova anche nel pacchetto libwxbase2.8-0 it seems that your package contains some file included in libwxbase2.8-0 that is already installed on my system. Note that I dont have previous version of sheetcam installed in my system. As quickdirty solution I forced the overwrite of offending files: dpkg --force-overwrite -i sheetcamlibs-2.8.7.deb Finally, I run the program: wow ! Many thanks for give to us (Linux-minded) this thing. - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Thanks Moses, I'll look into it. Les Moses O McKnight wrote: Hi Les, The Ubuntu wx libs are indeed out of date. I get my packages from http://apt.wxwidgets.org/ The line I use for Ubuntu Hardy 8.04 is: deb http://apt.wxwidgets.org/ gutsy-wx main These are the latest wx libs and the ones for 7.10 work fine on 8.04. They also have versions for different distributions of debian and ubuntu. You might be able to instruct the user to add the appropriate line to their software sources, or you may be able to write a small script to detect the distribution and add the correct line to the etc/apt/sources.list automatically. Check out this page for more information: http://wiki.wxpython.org/InstallingOnUbuntuOrDebian Moses - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Les: It's interesting to see the problems some are running into. Starting with a fresh copy of Ubuntu 8.04LTS, I installed SheetCam TNG V0.0.23 last week using the autopackage. No problem. Last night, I followed your instructions and had no problem uninstalling V0.0.23 or installing V0.0.24. I understand your pushing sand up a hill with your nose metaphor (I have sometimes felt it was more like pushing sand up my nose with a hill) but the installs just worked for me. Once installed, however, SheetCam TNG V0.0.24 is doing some funky interleaving of various window panes when I invoke Help. I'll try to do a screen capture if you haven't seen the behavior already. Regards, Kent - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] SheetCam TNG V0.0.24 for Linux released
Hi Kent, Most of the install issues have been with older versions. More recent Linux distributions are more standardised and easier to work with. With dialog boxes, the help is supposed to appear on the side of the window. It works reasonably well on Windows but Linux windows tend to be a lot more spread out so the help gets a bit big. Maybe that was one of those good ideas that doesn't work too well in practice. Les Kent A. Reed wrote: Les: It's interesting to see the problems some are running into. Starting with a fresh copy of Ubuntu 8.04LTS, I installed SheetCam TNG V0.0.23 last week using the autopackage. No problem. Last night, I followed your instructions and had no problem uninstalling V0.0.23 or installing V0.0.24. I understand your pushing sand up a hill with your nose metaphor (I have sometimes felt it was more like pushing sand up my nose with a hill) but the installs just worked for me. Once installed, however, SheetCam TNG V0.0.24 is doing some funky interleaving of various window panes when I invoke Help. I'll try to do a screen capture if you haven't seen the behavior already. Regards, Kent - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
