[Flexradio] Buffer Settings
ZS6AVM Wrote: Best wishes to ya'll for 2007 I had a Flex to Flex contact with a station in Italy, and he was surprised when I told him that I too was on an SDR-1000 Anyhow, I'm still a little confused with regards how the buffer sizes affect the quality of the audio (if it actually does). Apart from more latency with higher buffer settings, and high CPU usage with lower buffer sizes, which is as quoted in the User Manual. Which kinda indicates that, with a higher buffer setting the audio should be smoother, if that is the case, wot can one expect to happen to the audio with a lower buffer size ? Anyone got some answers fro me I have run my SDR / Delta 44 at 256, 512, and at 1024 buffers, and not sure if I can here any difference, apart from the latency issue So, wot I really want to know is, for SSB, wot buffer size will yield the best quality audio ??? Best regards Dave ZS6AVM *** Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. *** -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/8b9dbd25/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Desensing of signal by AGC due to carrier?
Dale, I also submitted a tuneable notch filter to the enhancement list a few months ago. The way I envision it working is much the same way it works in MixW, Right click on an unwanted signal. A drop down box has as a selection: ADD NOTCH FILTER. Click on this. You can add other notch filters at other frequencies too. They are pretty narrow; I add two for a Pactor II signal or a RTTY signal. These notch filters are very effective in MixW for the digital modes but don't do anything for you on SSB. You might also get some relief by turning ACG off and reducing the RF gain control. If the front end is overloading, try turning the preamp off. 73, Chas W1CG. At 10:46 PM 1/7/2007, you wrote: >Joe, I think the ANF only operates in the audio path after the AGC, so >it doesn't actually eliminate the carrier from within the passband of >the filter, although it does remove it from the audio output of the radio. > >However, a tunable, adjustable-width notch filter would solve this. >About a year ago, another Flexer came up with a great concept, and >unfortunately I do not remember who it was, although I remember his idea >and terminology. His idea was to have the ability to slide a notch >filter from either the left or right side of the panadapter display, and >place it on top of an offending carrier. In fact, he used the analogy of >having a 'quiver' of these notch filters available so that multiple >notches could be implemented simply by dragging them into position. > >A great idea, in my opinion, and one which cw op's would also find >useful, particularly those of us who prefer to use wider filter settings >where the NR is more effective. > >73, Dale >WA8SRA > > > >Joe - AB1DO wrote: > > >Hi all, > > > >I have noticed that when someone is tuning on top of a SSB signal, > the strong carrier causes the AGC to cut down the volume, thus > rendering a weak SSB signal all but inaudible. This is what I would > expect, I guess > > > >However, when I activate ANF (Block LMS), the carrier's effect is > killed, but the AGC keeps limiting the audio of the weak SSB > signal, thus still rendering it barely audible. When the carrier > itself disappears, the AGC increases audio again. > > > >Do others experience the same? Am I overlooking something, some > setting? Can anything be done about this? > > > >Thanks for any help, > >73 de Joe - AB1DO > > > >Configuration: > >Dell Dimension 4700 /w 3GHz P4 HT + 1GB DDR2 SDRAM + Intel 915G > Express + XPHomeSP2 > >SDR-1000 + RFE + 100W PA > >Delta-44 + Break-out kit > >-- next part -- > >An HTML attachment was scrubbed... > >URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070107/f310a4b6/attachment.html > > > >___ > >FlexRadio mailing list > >FlexRadio@flex-radio.biz > >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > >FlexRadio Homepage: http://www.flex-radio.com/ > > > >FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > > > > > > > >___ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com/ > >FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
I do use the TX EQ for a little "polishing" and the NG and I have not observed the symptoms you are describing, Joe. -Tim, W4TME -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of José Dumoulin Sent: Monday, January 08, 2007 1:52 AM Cc: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 Hi Joe I generally do not use the equalizer as I have a Behringer UB802. I put it in service for testing. I did not observe any of the symptom you described. 73, José - F5JD Joe - AB1DO a écrit : > Hi All, > > Using SVN 821 and I have noticed that when trying to use both the transmit > equalizer and the noise gate, PowerSDR will not transmit any audio at all in > SSB. Lowering the Gate value does not change anything. The panadapter > freezes, cpu processing shoots up to for me an unprecedented 85-90% (usually > around 20% when transmitting audio) and no audio is transmitted. PowerSDR > itself does not lock up. > > No other DSP or other processing of any kind is used. > > If I disable either the Gate or the Transmit Equalizer, there is no problem, > i.e. I can use either separately but not both together. Is anyone else > experiencing this? Or is there something I'm possibly overlooking? > > Thanks, > 73 de Joe - AB1DO > > Configuration: > Dell Dimension 4700 /w 3GHz P4 HT + 1GB DDR2 SDRAM + Intel 915G Express + > XPHomeSP2 > SDR-1000 + RFE + 100W PA > Delta-44 + Break-out kit > -- next part -- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070107/76347ffa/attachment.html > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > > ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Buffer Settings
[EMAIL PROTECTED] wrote: > Anyone got some answers fro me > I have run my SDR / Delta 44 at 256, 512, and at 1024 buffers, and not > sure if I can here any difference, apart from the latency issue > So, wot I really want to know is, for SSB, wot buffer size will yield > the best quality audio ??? > > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > At the bottom of every post there's a link to the Flex-radio site and the Knowledge Base. It's a great resourse for setting up the various options for various modes. Have a search through and I'm sure you will find something of use in explaining the various options and settings for voice and SSB operation. When you get a bit deeper in, there are two new papers on the use of the 160Hz filter and EQ settings. :-) Dave (G0DJA) ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Idea for new feature: instant replay
This is a done deal on Linux and on Windows it is conceptually trivial but would require custom software to do it since jack does not exist on Windows yet. There is supposedly a windows jack effort underway. But I would like breathing to be a long term thing so I am not holding my breath (until I asphyxiate myself) waiting. Bob Frank Brickle wrote: > This is what the "timemachine" application does under the jack > audio subsystem under Linux. > > 73 > Frank > AB2KT > > Terry Fox wrote: > >> The best thing about TiVo is that it ALWAYS does this recording in the >> background. In order to make this truly effective, it must always be >> running in the background, with a button on the user interface that allows >> that last xx seconds/minutes to be saved, or played back. If you must first >> hit a UI button to enable this function, the advantage is usually lost (by >> the time you hit the button it's too late). Having a function to >> semi-permanently enable/disable (not in real-time) would be OK for those who >> don't need it. >> >> Opening a file that stores the last xx (30?) seconds as a circular buffer >> should not be too difficult, but it does add more overhead. Ideas regarding >> storage length and whether the demoded audio or IF signal should be recorded >> are other questions... >> >> Anyway, this is a great idea! I love my TiVos. >> Terry >> >> - Original Message - >> From: "Larry Loen" <[EMAIL PROTECTED]> >> To: "Jim Lux" <[EMAIL PROTECTED]> >> Cc: <[EMAIL PROTECTED]>; >> Sent: Sunday, January 07, 2007 11:29 AM >> Subject: Re: [Flexradio] Idea for new feature: instant replay >> >> >> >>> Jim Lux wrote: >>> >>> At 06:41 AM 1/7/2007, K0MV wrote: > Those of you who have Tivo boxes will recognize this. > > The feature is a continuous recording of the last 5 minutes of the > received signal. You can rewind and go back to see if you copied that > DX callsign correctly, or maybe try a narrower filter. > > > Excellent idea. Especially the idea with the narrower/different >> filtering. >> I gotta warn you, though,if this becomes popular, I can see the outcry on the contesting reflectors.There are folks who beleive that when the contest period ends, it's "pencils down". Others say, whatever it takes. Others say, if you didn't copy it that way initially, tough beans, no looking back. I love the excitement of rules interpretation that novel new functionality can give you. Jim, W6RMK >>> He he. But, in a more serious vein, without really huge amounts of >>> storage, at least with the way we do things now, this won't amount to >>> more than maybe a half hour or so. >>> >>> The straightforward way would be to have the current record function >>> simply. . .record to memory in some sort of rotating buffer instead of a >>> file as such. But, jack that up to more than a couple of minutes and it >>> gets very large, even by today's stanards. >>> >>> I must admit, I've lusted after this feature more than once. >>> >>> What would be nicer still would be the ability in the record menu to >>> have a "store last 15 seconds" feature. THAT would do exactly what >>> you're talking about and it would be sufficiently selective. But, no >>> popups on such a feature, just an info bar giving the file name. >>> >>> >>> >>> >>> Larry WO0Z >>> >>> >>> >>> >>> ___ >>> FlexRadio mailing list >>> FlexRadio@flex-radio.biz >>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>> FlexRadio Homepage: http://www.flex-radio.com/ >>> >>> FlexRadio Knowledge Base: http://kb.flex-radio.com/ >>> >>> >> ___ >> FlexRadio mailing list >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> FlexRadio Homepage: http://www.flex-radio.com/ >> >> FlexRadio Knowledge Base: http://kb.flex-radio.com/ >> >> > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > -- Robert W. McGwier, Ph.D. Center for Communications Research 805 Bunn Drive Princeton, NJ 08540 (609)-924-4600 (sig required by employer) ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flex
Re: [Flexradio] Desensing of signal by AGC due to carrier?
Dale, I have no issue with the ANF - it works superb. And I agree that an extension with manually tunable NFs would also have merrit. I'm just wondering if it is at all possible to have the ANF work before the AGC (Forgive me if I'm totally off base here as I have no idea what the current processing order is or even if it would make sense). That way, the AGC would work on the signal after the carrier has been filtered out and (most likely) leave the SSB signal alone. I understand that I can manually correct for it by turning AGC off and adjusting RF/AF, but that's several controls to manipulate, which all would need to be readjusted again when the carrier itself disappears. Just wondering if it could be avoided in the first place. 73 de Joe - AB1DO - Original Message - From: "Dale Boresz" <[EMAIL PROTECTED]> To: "Joe - AB1DO" <[EMAIL PROTECTED]> Cc: Sent: Sunday, January 07, 2007 22:46 Subject: Re: [Flexradio] Desensing of signal by AGC due to carrier? > Joe, I think the ANF only operates in the audio path after the AGC, so it > doesn't actually eliminate the carrier from within the passband of the > filter, although it does remove it from the audio output of the radio. > > However, a tunable, adjustable-width notch filter would solve this. About > a year ago, another Flexer came up with a great concept, and unfortunately > I do not remember who it was, although I remember his idea and > terminology. His idea was to have the ability to slide a notch filter from > either the left or right side of the panadapter display, and place it on > top of an offending carrier. In fact, he used the analogy of having a > 'quiver' of these notch filters available so that multiple notches could > be implemented simply by dragging them into position. > > A great idea, in my opinion, and one which cw op's would also find useful, > particularly those of us who prefer to use wider filter settings where the > NR is more effective. > > 73, Dale > WA8SRA > > > > Joe - AB1DO wrote: > >>Hi all, >> >>I have noticed that when someone is tuning on top of a SSB signal, the >>strong carrier causes the AGC to cut down the volume, thus rendering a >>weak SSB signal all but inaudible. This is what I would expect, I guess >> >>However, when I activate ANF (Block LMS), the carrier's effect is killed, >>but the AGC keeps limiting the audio of the weak SSB signal, thus still >>rendering it barely audible. When the carrier itself disappears, the AGC >>increases audio again. >> >>Do others experience the same? Am I overlooking something, some setting? >>Can anything be done about this? >> >>Thanks for any help, >>73 de Joe - AB1DO >> >>Configuration: >>Dell Dimension 4700 /w 3GHz P4 HT + 1GB DDR2 SDRAM + Intel 915G Express + >>XPHomeSP2 >>SDR-1000 + RFE + 100W PA Delta-44 + Break-out kit >>-- next part -- >>An HTML attachment was scrubbed... >>URL: >>http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070107/f310a4b6/attachment.html >> >>___ >>FlexRadio mailing list >>FlexRadio@flex-radio.biz >>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>FlexRadio Homepage: http://www.flex-radio.com/ >> >>FlexRadio Knowledge Base: http://kb.flex-radio.com/ >> >> > > ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
José , I too use the UB802, so it is not a really big issue for me, although I do like to use the 160Hz notch filter. As several users have not reported the same issue, I'm reaching the conclusion it must be something in my setup. Still open to suggestions as to what it might be. 73 de Joe - AB1DO - Original Message - From: "José Dumoulin" <[EMAIL PROTECTED]> Cc: Sent: Monday, January 08, 2007 01:52 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 Hi Joe I generally do not use the equalizer as I have a Behringer UB802. I put it in service for testing. I did not observe any of the symptom you described. 73, José - F5JD Joe - AB1DO a écrit : > Hi All, > > Using SVN 821 and I have noticed that when trying to use both the transmit > equalizer and the noise gate, PowerSDR will not transmit any audio at all > in SSB. Lowering the Gate value does not change anything. The panadapter > freezes, cpu processing shoots up to for me an unprecedented 85-90% > (usually around 20% when transmitting audio) and no audio is transmitted. > PowerSDR itself does not lock up. > > No other DSP or other processing of any kind is used. > > If I disable either the Gate or the Transmit Equalizer, there is no > problem, i.e. I can use either separately but not both together. Is anyone > else experiencing this? Or is there something I'm possibly overlooking? > > Thanks, > 73 de Joe - AB1DO > > Configuration: > Dell Dimension 4700 /w 3GHz P4 HT + 1GB DDR2 SDRAM + Intel 915G Express + > XPHomeSP2 > SDR-1000 + RFE + 100W PA > Delta-44 + Break-out kit > -- next part -- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070107/76347ffa/attachment.html > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > > ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection
At 03:39 PM 1/6/2007, Gerald Capodieci wrote: >What a bunch of crybabies. >. Let's make a list of what the SDR 1001 should contain to make us >and perhaps some more hams buy it so this adventure can continue. 1. An ON/OFF switch that works. 2. 3. ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection
We've just installed a ATU and when we went to turn on, the on/off doesn't work. Power is applied. Is this a problem. I'm now off the air. Phil Philip LaMarche LaMarche Enterprises, Inc. www.instantgourmetspices.com www.W9DVM.com 727-944-3226 800-395-7795 pin 02 FAX 727-937-8834 NASFT # 30210 W9DVM -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Flanders Sent: Monday, January 08, 2007 12:58 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex Radio 1 watt Redirection At 03:39 PM 1/6/2007, Gerald Capodieci wrote: >What a bunch of crybabies. >. Let's make a list of what the SDR 1001 should contain to make us and >perhaps some more hams buy it so this adventure can continue. 1. An ON/OFF switch that works. 2. 3. ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection
the on/off switches don't work mine seems to operate. - Original Message - From: "Jerry Flanders" <[EMAIL PROTECTED]> To: Sent: Monday, January 08, 2007 12:58 PM Subject: Re: [Flexradio] Flex Radio 1 watt Redirection > At 03:39 PM 1/6/2007, Gerald Capodieci wrote: >>What a bunch of crybabies. >>. Let's make a list of what the SDR 1001 should contain to make us >>and perhaps some more hams buy it so this adventure can continue. > > 1. An ON/OFF switch that works. > > 2. > > 3. > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection
Well, I read that if you have the 100w power amp installed the bias current is still being sent to the power amp and that would mean that the unit is not really off. I use the switch on my power supply to turn my SDR-1000 off. Edwin Marzan AB2VW >From: "philip gentile" <[EMAIL PROTECTED]> >To: ,"Jerry Flanders" <[EMAIL PROTECTED]> >Subject: Re: [Flexradio] Flex Radio 1 watt Redirection >Date: Mon, 8 Jan 2007 13:15:05 -0500 > >the on/off switches don't work > >mine seems to operate. > >- Original Message - >From: "Jerry Flanders" <[EMAIL PROTECTED]> >To: >Sent: Monday, January 08, 2007 12:58 PM >Subject: Re: [Flexradio] Flex Radio 1 watt Redirection > > > > At 03:39 PM 1/6/2007, Gerald Capodieci wrote: > >>What a bunch of crybabies. > >>. Let's make a list of what the SDR 1001 should contain to make us > >>and perhaps some more hams buy it so this adventure can continue. > > > > 1. An ON/OFF switch that works. > > > > 2. > > > > 3. > > > > > > ___ > > FlexRadio mailing list > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > FlexRadio Homepage: http://www.flex-radio.com/ > > > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > >___ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com/ > >FlexRadio Knowledge Base: http://kb.flex-radio.com/ _ Get live scores and news about your team: Add the Live.com Football Page www.live.com/?addtemplate=football&icid=T001MSN30A0701 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection (Power Switch)
At 01:15 PM 1/8/2007, philip gentile wrote: >the on/off switches don't work > >mine seems to operate. Well, mine toggles between two mechanical positions also. But read the manual: On this radio, the ON/OFF operation is more complicated. The switch on the case DOES NOT power off the radio. I (used to) use one big station 13.8V supply and leave it constantly ON. Now I have to add another separate switched supply for the SDR-1000. With my new SDR1k-dedicated power supply, I _guess_ the case power switch can just be left ON all the time and all switching done on the mains to the external 13.8V power supply. Is it safe to do this, Flex? Excerpts from the current manual: Power-Up Procedure The SDR-1000 is unique in that the software does not have a way to cut the 13.8V power to the hardware unit. For this reason, we recommend the following procedure to ensure that the radio starts in a stable, safe state on Power Up: Power-Down Procedure The power-down sequence is almost the reverse of the power-up procedure. Note: It is necessary to cut the power at the supply in order to completely power down the radio and ensure the amplifier circuitry is not in a bias state. Jerry W4UK >- Original Message - From: "Jerry Flanders" <[EMAIL PROTECTED]> >To: >Sent: Monday, January 08, 2007 12:58 PM >Subject: Re: [Flexradio] Flex Radio 1 watt Redirection > > >>At 03:39 PM 1/6/2007, Gerald Capodieci wrote: >>>What a bunch of crybabies. >>>. Let's make a list of what the SDR 1001 should contain to make us >>>and perhaps some more hams buy it so this adventure can continue. >>1. An ON/OFF switch that works. >>2. >>3. >> >>___ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection
got it - i turn off my dc supply as well. this sounds reminiscent of the old "instant on" tv's when they left the filaments on even when the set was turned off. phil AB2JL - Original Message - From: "Edwin Marzan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; Sent: Monday, January 08, 2007 1:44 PM Subject: Re: [Flexradio] Flex Radio 1 watt Redirection > Well, I read that if you have the 100w power amp installed the bias > current is still being sent to the power amp and that would mean that the > unit is not really off. I use the switch on my power supply to turn my > SDR-1000 off. > > > > Edwin Marzan > AB2VW > > > > > >>From: "philip gentile" <[EMAIL PROTECTED]> >>To: ,"Jerry Flanders" <[EMAIL PROTECTED]> >>Subject: Re: [Flexradio] Flex Radio 1 watt Redirection >>Date: Mon, 8 Jan 2007 13:15:05 -0500 >> >>the on/off switches don't work >> >>mine seems to operate. >> >>- Original Message - >>From: "Jerry Flanders" <[EMAIL PROTECTED]> >>To: >>Sent: Monday, January 08, 2007 12:58 PM >>Subject: Re: [Flexradio] Flex Radio 1 watt Redirection >> >> >> > At 03:39 PM 1/6/2007, Gerald Capodieci wrote: >> >>What a bunch of crybabies. >> >>. Let's make a list of what the SDR 1001 should contain to make us >> >>and perhaps some more hams buy it so this adventure can continue. >> > >> > 1. An ON/OFF switch that works. >> > >> > 2. >> > >> > 3. >> > >> > >> > ___ >> > FlexRadio mailing list >> > FlexRadio@flex-radio.biz >> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> > FlexRadio Homepage: http://www.flex-radio.com/ >> > >> > FlexRadio Knowledge Base: http://kb.flex-radio.com/ >> >>___ >>FlexRadio mailing list >>FlexRadio@flex-radio.biz >>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>FlexRadio Homepage: http://www.flex-radio.com/ >> >>FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > _ > Get live scores and news about your team: Add the Live.com Football Page > www.live.com/?addtemplate=football&icid=T001MSN30A0701 > ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
Joe, Using the official latest realease 1.8.0, when I use the equalizer and the noise gate I notice that CPU cycles shoot up and PowerSDR slows down dramatically. The ptt is sluggish in both directions. Turn off the noise gate and the response is back to its normal zippy self. I'm using an HP Media Center PC with 3.0Gig Pentium Processor, a gig of RAM and a Delta 44 Sound Card. Our symptoms are not exactly the same but there is definitely something going on that puts a drain on our systems when the equalizer and noise gate are used together. Edwin Marzan AB2VW From: Joe - AB1DO <[EMAIL PROTECTED]> To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 Date: Mon, 08 Jan 2007 12:17:17 -0500 José , I too use the UB802, so it is not a really big issue for me, although I do like to use the 160Hz notch filter. As several users have not reported the same issue, I'm reaching the conclusion it must be something in my setup. Still open to suggestions as to what it might be. 73 de Joe - AB1DO - Original Message - From: "José Dumoulin" <[EMAIL PROTECTED]> Cc: Sent: Monday, January 08, 2007 01:52 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 Hi Joe I generally do not use the equalizer as I have a Behringer UB802. I put it in service for testing. I did not observe any of the symptom you described. 73, José - F5JD Joe - AB1DO a écrit : > Hi All, > > Using SVN 821 and I have noticed that when trying to use both the transmit > equalizer and the noise gate, PowerSDR will not transmit any audio at all > in SSB. Lowering the Gate value does not change anything. The panadapter > freezes, cpu processing shoots up to for me an unprecedented 85-90% > (usually around 20% when transmitting audio) and no audio is transmitted. > PowerSDR itself does not lock up. > > No other DSP or other processing of any kind is used. > > If I disable either the Gate or the Transmit Equalizer, there is no > problem, i.e. I can use either separately but not both together. Is anyone > else experiencing this? Or is there something I'm possibly overlooking? > > Thanks, > 73 de Joe - AB1DO > > Configuration: > Dell Dimension 4700 /w 3GHz P4 HT + 1GB DDR2 SDRAM + Intel 915G Express + > XPHomeSP2 > SDR-1000 + RFE + 100W PA > Delta-44 + Break-out kit > -- next part -- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070107/76347ffa/attachment.html > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > > ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ _ Find sales, coupons, and free shipping, all in one place! MSN Shopping Sales & Deals http://shopping.msn.com/content/shp/?ctid=198,ptnrid=176,ptnrdata=200639 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Sub-receiver and other mods in SVN819 +
I'm not aware that we changed anything related to the limits of the Sub RX. Please make sure that you are still using the same sampling rate as this will affect the range of the Sub RX. Also, double check that you are using the receivers in the same order as the 11kHz IF can cause the limits to be within range one way and not the other (i.e. freq 1 on VFO A works with freq 2 on VFO B, but freq 1 on VFO B will NOT work with freq 2 on VFO A). Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Charles Greene > Sent: Saturday, January 06, 2007 6:17 AM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] Sub-receiver and other mods in SVN819 + > > Hi, > > You have wrecked a perfectly useable feature in PowerSDR 1.8 in v 1.9 > SVN 819+. In 1.8 I can set the sub receiver and main receiver > basically 36 KHz apart, enabling me to copy both the Region 1 digital > band at 7035 and the Region 2 digital band at 7070 at the same time, > responding to calls on either. In SVN 819, The maximum frequency > offset is 24 KHz, precluding the above. Please change it back. > > 73, W1CG, Chas > > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Flex Radio 1 watt Redirection
Edwin Marzan wrote: >I use the switch on my power supply to turn my SDR-1000 off. > > > Why would you ever want to turn it off? 73 Alf NU8I ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Buffer Settings
I found that using Buffer size 2840 sounds a clearer during my usually noisy reception here in Los Angeles. Otherwise I found surprisingly little difference among any of the settings. -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/9122b167/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Sub RX toggle Key and Sub RX Volume
There are two vertical sliders in the Sub RX section. The one on the left controls the Main RX volume while the one on the right controls the Sub RX volume. Note that these are not active unless the Sub RX is active. When it is active, the controls combine with the overall AF control (i.e. if you set the Main RX to mid and the Sub RX to mid and the AF to the mid point, you would get 25% (0.5*0.5) of the max audio output. Conceptually, the AF is an overall gain control in all cases. The other two controls are to enable you to manipulate the main/Sub RX audio independently when Sub RX is active. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of NU8Z > Sent: Saturday, January 06, 2007 7:37 AM > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] Sub RX toggle Key and Sub RX Volume > ...I'm running version 1.9.0 (803). In this version > the Sub RX volume control in the Sub RX panel does not control the Sub RX > volume. ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] Transmit to Receive Glitch
I have the same issue. No rhyme or reason to the glitch. All I have top do is hit the MOX or the standby button and then hit it agn. Problem with both 1.80 and 1.90. Frank WY3D -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/fb418080/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
Edwin, Nice to know I'm not alone. (Others have also contacted me privately with the same issue). Interesting is also that we are both using 3GHz Pentium Processors with 1GB of RAM and a Delta 44. Don't know if that is relevant, just an observation. In the mean time I have done some more experimenting. First I started with a clean database, just to make sure I had the default settings. I then adjusted the Gate setting such that enviromental noise was blocked (around -23 here). As I was doing so, I immediately noticed that the moment the Gate is closed (blocks), CPU% increases. Without EQ on, the increase is small however, only some 5-10%. The problem only occurs when both Gate and EQ are on and the Gate is closed (blocking environmental noise). The CPU% then jumps to 70-80%. Speaking in the mic, the Gate opens after a delay at best, but usually not at all. Sometimes, on the first over, everything will work OK, but on subsequent overs there is either a long delay or no audio transmission whatsoever. All information before the Gate opens is lost. Once (and if) the Gate is open due to audio in the mic, CPU% immediately drops to the usual 20% or so on transmission. The closed Gate (in conjunction with the EQ) seems to cause the problem. The problem occurs in both 1.8.0 and 1.9.0SVN821. Adjusting the audio and especially the DSP buffers makes a difference. Lowering the DSP buffer from 4096 to 1024 cuts the first syllable as opposed to no audio getting through at all (monitoring with a secind receiver). Without EQ on, the Gate will open immediately no matter what the buffer settings and all of the audio gets through to to the second receiver. My process priority is High. Adjusting this down makes no difference (as I would expect). I have not tried the Real Time setting yet. Hope this helps resolve the issue, or helps someone point out what I need to adjust to make Gate and EQ work together. 73 de Joe - AB1DO - Original Message - From: "Edwin Marzan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; Sent: Monday, January 08, 2007 13:58 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 > Joe, > > Using the official latest realease 1.8.0, when I use the equalizer and the > noise gate I notice that CPU cycles shoot up and PowerSDR slows down > dramatically. The ptt is sluggish in both directions. Turn off the noise > gate and the response is back to its normal zippy self. > > I'm using an HP Media Center PC with 3.0Gig Pentium Processor, a gig of > RAM and a Delta 44 Sound Card. Our symptoms are not exactly the same but > there is definitely something going on that puts a drain on our systems > when the equalizer and noise gate are used together. > > > > Edwin Marzan > AB2VW ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
Edwin, Nice to know I'm not alone. Others have contacted me privately with the same issue also. In the mean time I have done some further experimenting. I have checked both 1.8.0 and 1.9.0SVN821 - there is no difference. Also I have started with a clean database, just in case, again no difference. It is very clear that the issue occurs only when both Gate and Transmit EQ (did not check RX EQ) are enabled. In that case, when starting the transmission with a closed Gate, the CPU% shoots up to 80-90%. If and when the Gate opens, CPU% immediately drops to the usual 20% or so on voice transmission. Sometimes the Gate will open after a delay, other times not at all (see below). All information prior to the Gate opening is lost (monitoring with a second receiver). A higher audio buffer and especially a lower DSP buffer will make a difference: with audio buffer=512 and DSP buffer=4096 the Gate will not open on transmission. With audio buffer=2048 and DSP buffer=1024, the Gate will open after a delay, cutting off the first syllable at best. Changing the sound card sampling rate makes no difference. Lowering the system priority from High (my usual setting) makes no difference, it doesn't get worse. Hope this helps resolve this issue. 73 de Joe - AB1DO - Original Message - From: "Edwin Marzan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; Sent: Monday, January 08, 2007 13:58 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 > Joe, > > Using the official latest realease 1.8.0, when I use the equalizer and the > noise gate I notice that CPU cycles shoot up and PowerSDR slows down > dramatically. The ptt is sluggish in both directions. Turn off the noise > gate and the response is back to its normal zippy self. > > I'm using an HP Media Center PC with 3.0Gig Pentium Processor, a gig of > RAM and a Delta 44 Sound Card. Our symptoms are not exactly the same but > there is definitely something going on that puts a drain on our systems > when the equalizer and noise gate are used together. > > > > Edwin Marzan > AB2VW ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] Apologies for second message
Sorry for the second message, but on sending the first one Outlook Express crashed and I had no record of it being it sent. However, lo and behold, to my surprise it turns up on the Reflector. Sorry for taking up the extra bandwidth. 73 de Joe - AB1DO - Original Message - From: "Joe - AB1DO" <[EMAIL PROTECTED]> To: Sent: Monday, January 08, 2007 16:44 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821 > Edwin, > > Nice to know I'm not alone. Others have contacted me privately with the > same > issue also. > > In the mean time I have done some further experimenting. I have checked > both > 1.8.0 and 1.9.0SVN821 - there is no difference. Also I have started with a > clean database, just in case, again no difference. > > It is very clear that the issue occurs only when both Gate and Transmit EQ > (did not check RX EQ) are enabled. In that case, when starting the > transmission with a closed Gate, the CPU% shoots up to 80-90%. If and when > the Gate opens, CPU% immediately drops to the usual 20% or so on voice > transmission. Sometimes the Gate will open after a delay, other times not > at > all (see below). All information prior to the Gate opening is lost > (monitoring with a second receiver). > > A higher audio buffer and especially a lower DSP buffer will make a > difference: with audio buffer=512 and DSP buffer=4096 the Gate will not > open > on transmission. With audio buffer=2048 and DSP buffer=1024, the Gate will > open after a delay, cutting off the first syllable at best. Changing the > sound card sampling rate makes no difference. Lowering the system priority > from High (my usual setting) makes no difference, it doesn't get worse. > > Hope this helps resolve this issue. > > 73 de Joe - AB1DO > > - Original Message - > From: "Edwin Marzan" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]>; > Sent: Monday, January 08, 2007 13:58 > Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in > SVN821 > > >> Joe, >> >> Using the official latest realease 1.8.0, when I use the equalizer and >> the >> noise gate I notice that CPU cycles shoot up and PowerSDR slows down >> dramatically. The ptt is sluggish in both directions. Turn off the noise >> gate and the response is back to its normal zippy self. >> >> I'm using an HP Media Center PC with 3.0Gig Pentium Processor, a gig of >> RAM and a Delta 44 Sound Card. Our symptoms are not exactly the same but >> there is definitely something going on that puts a drain on our systems >> when the equalizer and noise gate are used together. >> >> >> >> Edwin Marzan >> AB2VW > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit equalizer + Gate causes lock-up in SVN821
Rick, You hit the nail on the head! If I unselect the 160Hz Notch filter, the CPU% here hangs around 13-17% on transmission with Gate and EQ on and all works flawlessly. Invoking the notch causes the problems - CPU% shoots up. Great find. Only thing is, I'd like to use the notch filter 73 de Joe - AB1DO - Original Message - From: "Richard Bischoff" <[EMAIL PROTECTED]> To: "'Joe - AB1DO'" <[EMAIL PROTECTED]> Sent: Monday, January 08, 2007 17:08 Subject: RE: [Flexradio] Transmit equalizer + Gate causes lock-up in SVN821 > Try un-checking the "160HZ" Notch in the Equalizer...My CPU% cuts in half > when the notch is NOT selected... > Rick > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Joe - AB1DO > Sent: Monday, January 08, 2007 1:31 PM > To: FlexRadio@flex-radio.biz > Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in > SVN821 > > Edwin, > > Nice to know I'm not alone. (Others have also contacted me privately with > the same issue). Interesting is also that we are both using 3GHz Pentium > Processors with 1GB of RAM and a Delta 44. Don't know if that is relevant, > just an observation. > > In the mean time I have done some more experimenting. First I started with > a > > clean database, just to make sure I had the default settings. I then > adjusted the Gate setting such that enviromental noise was blocked > (around -23 here). As I was doing so, I immediately noticed that the > moment > the Gate is closed (blocks), CPU% increases. Without EQ on, the increase > is > small however, only some 5-10%. > > The problem only occurs when both Gate and EQ are on and the Gate is > closed > (blocking environmental noise). The CPU% then jumps to 70-80%. Speaking in > the mic, the Gate opens after a delay at best, but usually not at all. > Sometimes, on the first over, everything will work OK, but on subsequent > overs there is either a long delay or no audio transmission whatsoever. > All > information before the Gate opens is lost. Once (and if) the Gate is open > due to audio in the mic, CPU% immediately drops to the usual 20% or so on > transmission. The closed Gate (in conjunction with the EQ) seems to cause > the problem. > > The problem occurs in both 1.8.0 and 1.9.0SVN821. Adjusting the audio and > especially the DSP buffers makes a difference. Lowering the DSP buffer > from > 4096 to 1024 cuts the first syllable as opposed to no audio getting > through > at all (monitoring with a secind receiver). Without EQ on, the Gate will > open immediately no matter what the buffer settings and all of the audio > gets through to to the second receiver. > > My process priority is High. Adjusting this down makes no difference (as I > would expect). I have not tried the Real Time setting yet. > > Hope this helps resolve the issue, or helps someone point out what I need > to > > adjust to make Gate and EQ work together. > > 73 de Joe - AB1DO ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] No Transmit
I have discovered today that there are some frequencies throughout the bands that the radio will not transmit on. 1862 khz, 1862.057, 1861.990, 1861.969, etc. I can find these frequencies by changing the vfo while the rig is tranmitting. I can hear a relay click inside the rig when it gets to these frequencies and then the rig will not tranmit. Go up or down 1hz and the rig will once agn transmit. Any ideas? Frank WY3D -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/afe3360e/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Squelch after ANF, not before
Hello and happy new year! Maybe so, but they still work a lot with V1.9.x now I see. Why is that? I'll like to hear about the development of V2.0 then...? And this, my suggestion, is not a new feature. Not a bug either. Just a litle re-programming. :-) Please consider, Flex-guys, Eric?... -Stig -Opprinnelig melding- Fra: Tim Ellison [mailto:[EMAIL PROTECTED] Sendt: 10. desember 2006 03:51 Til: Stig Rasmussen Emne: RE: [Flexradio] Squelch after ANF, not before Stig, The development of the 1.6.x version of PowerSDR is essentially "frozen" in the respect of adding new features. Eric and the guys are working very hard on the new 2.0 version which has a brand new architecture change where the radio functions are separated from the UI (user Interface or GUI). Once the "core" portion of 2.0 is working and released, then there is going to be an evaluation of all the features that have been posted and we are going to allow the users to vote for there "top 10". All the votes will be compiled and the most selected features will be the first to be implemented. Then a second round of feature selections will take place. We appreciate you input for the squelch feature request and encourage you to add as many as new features you can think of. -Tim Integrated Technical Services www.itsco.com "Si fractum non sit, id reficere" -Unknown Roman consultant -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stig Rasmussen Sent: Saturday, December 09, 2006 6:06 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Squelch after ANF, not before Hello all. First; I'll post this here because I see nothing happening in the "Feature request" section on the web. All cases is "Open" since beginning og august. Why is that? To the subject...: It could be an idea to make the squelch be operating after the ANF if possible. I often monitor SSB frequencies with the squelch set. Then a carrier or some cw opens the squelch. If I use the ANF, the tone disapears, but the squelch remains open and the noise comes through. I'll think that if the ANF took care of the beep tone in front of the squelch it would not open. (I hope you understand) Thank you. - 73 LA4WAA - Stig ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com __ NOD32 1912 (20061209) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
I just tried software version 1.6.3 (K6JCA) and I don't have the problem with this software. - Original Message - From: Frank Mayer To: FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 5:39 PM Subject: [Flexradio] No Transmit I have discovered today that there are some frequencies throughout the bands that the radio will not transmit on. 1862 khz, 1862.057, 1861.990, 1861.969, etc. I can find these frequencies by changing the vfo while the rig is tranmitting. I can hear a relay click inside the rig when it gets to these frequencies and then the rig will not tranmit. Go up or down 1hz and the rig will once agn transmit. Any ideas? Frank WY3D -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/afe3360e/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/ca784ba1/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] UCB type relays
For those who missed them last time: Electronic Goldmine www.goldmine-elec.com is having a close out sale on plastic DIP signal switching relays, Fujitsu UM1-12W-K. Their cat. # G14599 at 2/$.99 1.1 SWR to 1 GHz or so at about a watt. Probably great for 2M IF switching, etc. or a Flex-Radio type UCB board. Or just for the junk box N0UU ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
Frank, I just tried v1.8.0 & SVN 821 and could not duplicate the problem. I would suggest starting with a clean, new database. Rename PowerSDR.mdb to something else & start the console. When asked, do not import a previous version. 73, Ray, K9DUR -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
I just deleted 1.8.0 completely from the hard drive and reloaded it. Transmits on those frequencies now...Go figure. I'll now try the same thing with 1.9.0. It works too. Very frustrating.. - Original Message - From: Frank Mayer To: Frank Mayer ; FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 5:59 PM Subject: Re: [Flexradio] No Transmit I just tried software version 1.6.3 (K6JCA) and I don't have the problem with this software. - Original Message - From: Frank Mayer To: FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 5:39 PM Subject: [Flexradio] No Transmit I have discovered today that there are some frequencies throughout the bands that the radio will not transmit on. 1862 khz, 1862.057, 1861.990, 1861.969, etc. I can find these frequencies by changing the vfo while the rig is tranmitting. I can hear a relay click inside the rig when it gets to these frequencies and then the rig will not tranmit. Go up or down 1hz and the rig will once agn transmit. Any ideas? Frank WY3D -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/afe3360e/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/951f34a3/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
I just did and it initially transmitted on those frequencies. Then I started putting all my transmit profiles back in and memories and now it's doing the same thing agn in 1.9.0! 1.8.0 is still ok but I haven't changed any of the settings from default except for 48k to 96k sampling rate. Oh boy - Original Message - From: Ray Andrews To: FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 6:25 PM Subject: Re: [Flexradio] No Transmit Frank, I just tried v1.8.0 & SVN 821 and could not duplicate the problem. I would suggest starting with a clean, new database. Rename PowerSDR.mdb to something else & start the console. When asked, do not import a previous version. 73, Ray, K9DUR -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/fee830c8/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821The problem only occurs when both Gate and EQ are on and the Gate is closed
"The problem only occurs when both Gate and EQ are on and the Gate is closed (blocking environmental noise). The CPU% then jumps to 70-80%. Speaking in the mic, the Gate opens after a delay at best, but usually not at all. Sometimes, on the first over, everything will work OK, but on subsequent overs there is either a long delay or no audio transmission whatsoever. All information before the Gate opens is lost. Once (and if) the Gate is open due to audio in the mic, CPU% immediately drops to the usual 20% or so on transmission. The closed Gate (in conjunction with the EQ) seems to cause the problem." I run my SDR1000 in SSB mode with the TX Equalizer active and the Noise Gate active along with the 160Hz notch. I cannot duplicate your difficulty here. I checked my CPU usage and the maximum I saw was 10% and it very quickly settled back to its more normal range of 3 - 5%. I am using a dual core AMD 6800 + 1.2Ghz machine. Anything but a power house these days. The VOX triggers well, and SSB operation is "normal". Iam running version 1.9.0 and I believe the latest SVN. The amount of CPU usage you report is much hihger than I experience. While doing the test I had Outlook, SDR1000 console, CWGet, and ACLOG 3.0 running. I am running Windows XP Service pack 2 and have made no optimization changes, it is pure virgin XP. 73 Jim, W4ATK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
Please enter the TX profiles and memories one at a time to see what parameter or combination of parameters is affecting the TX. -Tim W4TME -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer Sent: Monday, January 08, 2007 7:10 PM To: Ray Andrews; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] No Transmit I just did and it initially transmitted on those frequencies. Then I started putting all my transmit profiles back in and memories and now it's doing the same thing agn in 1.9.0! 1.8.0 is still ok but I haven't changed any of the settings from default except for 48k to 96k sampling rate. Oh boy - Original Message - From: Ray Andrews To: FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 6:25 PM Subject: Re: [Flexradio] No Transmit Frank, I just tried v1.8.0 & SVN 821 and could not duplicate the problem. I would suggest starting with a clean, new database. Rename PowerSDR.mdb to something else & start the console. When asked, do not import a previous version. 73, Ray, K9DUR -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/5d6ce92c/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/fee830c8/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
Now it will tranmit on 3885 if I turn the SR off! What can cause this?? - Original Message - From: Tim Ellison To: Frank Mayer ; Ray Andrews ; FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 7:40 PM Subject: RE: [Flexradio] No Transmit Please enter the TX profiles and memories one at a time to see what parameter or combination of parameters is affecting the TX. -Tim W4TME -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer Sent: Monday, January 08, 2007 7:10 PM To: Ray Andrews; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] No Transmit I just did and it initially transmitted on those frequencies. Then I started putting all my transmit profiles back in and memories and now it's doing the same thing agn in 1.9.0! 1.8.0 is still ok but I haven't changed any of the settings from default except for 48k to 96k sampling rate. Oh boy - Original Message - From: Ray Andrews To: FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 6:25 PM Subject: Re: [Flexradio] No Transmit Frank, I just tried v1.8.0 & SVN 821 and could not duplicate the problem. I would suggest starting with a clean, new database. Rename PowerSDR.mdb to something else & start the console. When asked, do not import a previous version. 73, Ray, K9DUR -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/5d6ce92c/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/fee830c8/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/a68f99bd/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
I think I'm getting somewhere now. The DDS setting in Setup/General/Hardware Config is affecting the problem. If I auto calibrate to WWV it sets to 468 and 3885 starts to work. It was previously set to "0" after the install. It was set to 407 when all the other freqs weren't working. I'm afraid to touch it now! I thought that setting just calibrated the frequency accuracy of the radio. - Original Message - From: Tim Ellison To: Frank Mayer ; Ray Andrews ; FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 7:40 PM Subject: RE: [Flexradio] No Transmit Please enter the TX profiles and memories one at a time to see what parameter or combination of parameters is affecting the TX. -Tim W4TME -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer Sent: Monday, January 08, 2007 7:10 PM To: Ray Andrews; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] No Transmit I just did and it initially transmitted on those frequencies. Then I started putting all my transmit profiles back in and memories and now it's doing the same thing agn in 1.9.0! 1.8.0 is still ok but I haven't changed any of the settings from default except for 48k to 96k sampling rate. Oh boy - Original Message - From: Ray Andrews To: [EMAIL PROTECTED] Sent: Monday, January 08, 2007 6:25 PM Subject: Re: [Flexradio] No Transmit Frank, I just tried v1.8.0 & SVN 821 and could not duplicate the problem. I would suggest starting with a clean, new database. Rename PowerSDR.mdb to something else & start the console. When asked, do not import a previous version. 73, Ray, K9DUR -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/5d6ce92c/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/fee830c8/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/bc82a8d5/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] OpenOffice "base" for PowerSDR mdb file?
Hi, has anyone been able to edit/see the PowerSDR .mdb file using OpenOffice "base"? how did you do it? mny tnx, de ken n9vv ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
Now I'm getting somewhere. Now 3885.003 doesn't transmit. If I change the DDS setting to 458 from 468, 3885.003 works but 3885.018 doesn't transmit..I can hear a relay in the rig click when this happens. - Original Message - From: Tim Ellison To: Frank Mayer ; Ray Andrews ; FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 7:40 PM Subject: RE: [Flexradio] No Transmit Please enter the TX profiles and memories one at a time to see what parameter or combination of parameters is affecting the TX. -Tim W4TME -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer Sent: Monday, January 08, 2007 7:10 PM To: Ray Andrews; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] No Transmit I just did and it initially transmitted on those frequencies. Then I started putting all my transmit profiles back in and memories and now it's doing the same thing agn in 1.9.0! 1.8.0 is still ok but I haven't changed any of the settings from default except for 48k to 96k sampling rate. Oh boy - Original Message - From: Ray Andrews To: FlexRadio@flex-radio.biz Sent: Monday, January 08, 2007 6:25 PM Subject: Re: [Flexradio] No Transmit Frank, I just tried v1.8.0 & SVN 821 and could not duplicate the problem. I would suggest starting with a clean, new database. Rename PowerSDR.mdb to something else & start the console. When asked, do not import a previous version. 73, Ray, K9DUR -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/5d6ce92c/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070108/fee830c8/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007 6:29 PM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/bf3880b7/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
Jim, Hmm, the mystery remains then... There must be something about a setting/combination of settings or a certain system configuration that creates the increase of CPU% that I and some others are seeing, but not everyone, as you just confirmed. Thanks for the report, 73 de Joe - AB1DO - Original Message - From: "Jim, W4ATK" <[EMAIL PROTECTED]> To: "Flex-radio Reflector" Sent: Monday, January 08, 2007 19:18 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821The problem only occurs when both Gate and EQ are on and the Gate is closed > "The problem only occurs when both Gate and EQ are on and the Gate is > closed > (blocking environmental noise). The CPU% then jumps to 70-80%. Speaking in > the mic, the Gate opens after a delay at best, but usually not at all. > Sometimes, on the first over, everything will work OK, but on subsequent > overs there is either a long delay or no audio transmission whatsoever. > All > information before the Gate opens is lost. Once (and if) the Gate is open > due to audio in the mic, CPU% immediately drops to the usual 20% or so on > transmission. The closed Gate (in conjunction with the EQ) seems to cause > the problem." > > I run my SDR1000 in SSB mode with the TX Equalizer active and the Noise > Gate > active along with the 160Hz notch. I cannot duplicate your difficulty > here. > I checked my CPU usage and the maximum I saw was 10% and it very quickly > settled back to its more normal range of 3 - 5%. I am using a dual core > AMD > 6800 + 1.2Ghz machine. Anything but a power house these days. The VOX > triggers well, and SSB operation is "normal". Iam running version 1.9.0 > and > I believe the latest SVN. The amount of CPU usage you report is much > hihger > than I experience. While doing the test I had Outlook, SDR1000 console, > CWGet, and ACLOG 3.0 running. I am running Windows XP Service pack 2 and > have made no optimization changes, it is pure virgin XP. > > 73 Jim, W4ATK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821
Jim, Hmm, the mystery remains then... There must be something about a setting/combination of settings or a certain system configuration that creates the increase of CPU% that I and some others are seeing, but not everyone, as you just confirmed. Thanks for the report, 73 de Joe - AB1DO - Original Message - From: "Jim, W4ATK" <[EMAIL PROTECTED]> To: "Flex-radio Reflector" Sent: Monday, January 08, 2007 19:18 Subject: Re: [Flexradio] Transmit euqalizer + Gate causes lock-up in SVN821The problem only occurs when both Gate and EQ are on and the Gate is closed > "The problem only occurs when both Gate and EQ are on and the Gate is > closed > (blocking environmental noise). The CPU% then jumps to 70-80%. Speaking in > the mic, the Gate opens after a delay at best, but usually not at all. > Sometimes, on the first over, everything will work OK, but on subsequent > overs there is either a long delay or no audio transmission whatsoever. > All > information before the Gate opens is lost. Once (and if) the Gate is open > due to audio in the mic, CPU% immediately drops to the usual 20% or so on > transmission. The closed Gate (in conjunction with the EQ) seems to cause > the problem." > > I run my SDR1000 in SSB mode with the TX Equalizer active and the Noise > Gate > active along with the 160Hz notch. I cannot duplicate your difficulty > here. > I checked my CPU usage and the maximum I saw was 10% and it very quickly > settled back to its more normal range of 3 - 5%. I am using a dual core > AMD > 6800 + 1.2Ghz machine. Anything but a power house these days. The VOX > triggers well, and SSB operation is "normal". Iam running version 1.9.0 > and > I believe the latest SVN. The amount of CPU usage you report is much > hihger > than I experience. While doing the test I had Outlook, SDR1000 console, > CWGet, and ACLOG 3.0 running. I am running Windows XP Service pack 2 and > have made no optimization changes, it is pure virgin XP. > > 73 Jim, W4ATK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] USB adapter
Help!!! Whenever I turn Pw rSDR off and turn it back on I have to reinstall the USB Adapter. Any ideas?? Thanks, Art W8IKN __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/434df73f/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] Proset-5, Heil
It will plug into and run the SDR. Use a 1/8-1/4 converter for the Mic and 2x 1/4 mono to 1/4 stereo for the headphones. The cost is about $8.00 at a music store. Using the HM-5 cartridge, the SDR transmit settings are: High=3600, Low=100. EQ: Preamp=+6, Low=+6, Mid=0, High=+12. Signal reports are superb! -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/0f78488b/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] Recording of W9AD on his Flex
I have a growing collection of audio clips that I eventually intend to place in an audio archives website for ham radio. In particular AM stations such as Dave. As everyone can hear, Dave has wonderful audio using his Flex SDR on AM. I'm proud to see more and more Flexers getting their SDR on AM, and just in recent months! Many don't realize just how great the audio is using the Flex on AM, not to mention how well the Flex receives AM to full fidelity. I made this short clip of Dave this evening using my Flex for the recording. Dave - W9AD 8khz filter No pre or post processing other than converting to MP3 Signal was not as strong as usual, however, still Q5 http://w5ami.net/w9ad_1-8-2007_9_49_48_PM.mp3 73 Brian / W5AMI -- Suburbia is where the developer bulldozes out the trees, then names the streets after them. - Bill Vaughan ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Desensing of signal by AGC due to carrier?
> Dale, > > I also submitted a tuneable notch filter to the enhancement list a > few months ago. The way I envision it working is much the same way > it works in MixW, Right click on an unwanted signal. A drop down > box has as a selection: ADD NOTCH FILTER. Click on this. You can add > other notch filters at other frequencies too. They are pretty > narrow; I add two for a Pactor II signal or a RTTY signal. These > notch filters are very effective in MixW for the digital modes but > don't do anything for you on SSB. > Long ago and far away, before we had the external list, and probably before this reflector was established, I proposed a notch filter that worked on a "drag and drop" basis. It would stay on the frequency that the notch was deposited on. The scroll wheel could be used, if need be, to widen it up. The original listing had pictures which may or may not still show up if we could find the thread, which (I think) would have appeared on the original Flex web site. Larry WO0Z ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] No Transmit
Frank, Is there any way to look at your .mbd with Microsoft Access? If the frequency in the Band Text Table has false in the transmit table, the SDR will not transmit on that frequency. 73, Chas, W1CG At 07:09 PM 1/8/2007, Frank Mayer wrote: >I just did and it initially transmitted on those frequencies. Then >I started putting all my transmit profiles back in and memories and >now it's doing the same thing agn in 1.9.0! >1.8.0 is still ok but I haven't changed any of the settings from >default except for 48k to 96k sampling rate. Oh boy > - Original Message - > From: Ray Andrews > To: FlexRadio@flex-radio.biz > Sent: Monday, January 08, 2007 6:25 PM > Subject: Re: [Flexradio] No Transmit > > > Frank, > > I just tried v1.8.0 & SVN 821 and could not duplicate the problem. > > I would suggest starting with a clean, new database. Rename > PowerSDR.mdb to something else & start the console. When asked, do > not import a previous version. > > 73, Ray, K9DUR > > -- next part -- > An HTML attachment was scrubbed... > URL: > http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/5d6ce92c/attachment.html > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.432 / Virus Database: 268.16.7/619 - Release Date: > 1/7/2007 6:29 PM > >-- next part -- >An HTML attachment was scrubbed... >URL: >http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070108/fee830c8/attachment.html > > >___ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com/ > >FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] Received Audio & KVM Switches
I have my Flex Radio really sounding good, especially on the transmit side. As for receive, I am using a pair of Harmon Kardon powered speakers that leave a lot to be desired. I would be interested to know which speakers are available that will reproduce the wonderful audio that I know is coming out of the radio. BTW, I just installed a KVM switch to enable me to run 2 computers with only one keyboard, monitor and mouse. I bought a bunch of them on an eBay auction so if anyone is interested in one, I am selling them at $15 each plus shipping. They do not require a power supply as they are powered thru the PS/2 connections. They are made by Avocent and they do not come with cables. You would need 4 PS/2 male to male cables and 2 VGA (monitor) male to male cables. They allow you to switch between computers with either a push of a switch or a key sequence. Anyone interested, please contact me off line. Bob Maser W6TR ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] Received Audio & KVM Switches
Altec Lansing 221 - very nice sound and good bass. On Monday 08 January 2007 7:40 pm, Bob Maser wrote: > I have my Flex Radio really sounding good, especially on the transmit side. > As for receive, I am using a pair of Harmon Kardon powered speakers that > leave a lot to be desired. I would be interested to know which speakers > are available that will reproduce the wonderful audio that I know is coming > out of the radio. > > BTW, I just installed a KVM switch to enable me to run 2 computers with > only one keyboard, monitor and mouse. I bought a bunch of them on an eBay > auction so if anyone is interested in one, I am selling them at $15 each > plus shipping. They do not require a power supply as they are powered thru > the PS/2 connections. They are made by Avocent and they do not come with > cables. You would need 4 PS/2 male to male cables and 2 VGA (monitor) male > to male cables. They allow you to switch between computers with either a > push of a switch or a key sequence. Anyone interested, please contact me > off line. > > Bob Maser W6TR > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com/ > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/