[Flexradio] SDR + kitchen sink for trade
I have decided to trade my SDR 1K, 100w PA, ATU, 2 meter transverter, parallel cable, usb cable, external clock kit, delta 44 original and Tony's version of break out box, cables, Heil Boom PL-2T and SM-2, PR40 , one complete UCB kit, one UBC pcb, one ozy, one Janus (new built versions not kits), 2 atlas boards, 2 Pinocchio's. This radio only has a few hours on it, and has 8 months left on the warranty. I have used it on the Army Mars bands with a g5rv. I am really centered on emcomms and satellite work, so this setup is not practical for me anymore. I need an all mode radio/mobile/base ( I prefer Yaesu or kenwood) that I can deploy with. I also have a Hy-gain crank up 52' with a heavy fold over base to trade, pictures can be seen at http ke5eup dot net. I am putting up a 100' tower and I already have a 70' crank up for emcomm, so this one needs a home, all pulleys and winches work, no rust, needs new cables. Why trade? It is just better for me, I am on a fixed income, and would rater trade than handle the money hassle. I am good on QRZ. Thanks, Al KE5EUP/AAR6CU/T BCARNTX, KCARC, ARRL, AMSAT ARRL WTX ARES EC Callahan County Races CLO ALT 42-059-D Callahan County ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex HRD
Jerry My SDR1k is always connected to HRD. If you have VAC, verify that it is on for digital modes. If not, give us more info about your setup. Also install the latest HRD build, at present, 1628. José F5JD Le jeudi 25 octobre 2007 à 20:43 -0500, Bob Tracy a écrit : Jerry, Could you be a little more specific on you HRD question. Are you using DM780 or PSK31 Deluxe? How do you have Virtual Audio Cable configured? There are several good articles in the Knowledge Base that will help you get up and running on digital modes. My particular setup on my FLEX5000A using HRD/DM780 is as follows: VAC set for 2 cables at a 48000 sample rate. In DM780, the Input (receive) is set to Virtual Cable 2 In, the output (transmit) is set to Virtual Cable 1 Out. PTT is set to run through HRD using CAT. Hope this helps, Bob K5KDN -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jerry Harley Sent: Thursday, October 25, 2007 8:13 PM To: Gordon Lois Duff; FlexRadio Subject: Re: [Flexradio] Flex HRD Gordon Lois Duff wrote: Jerry, Did you ever get a response to your question? I have the same issue. Gordon, KA2NLM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.10/1091 - Release Date: 10/24/2007 2:31 PM No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.10/1091 - Release Date: 10/24/2007 2:31 PM No I did not get an answer. I wish more attention was paid to question like ours and less on 2nd order . Jerry ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] 1K RF Amp Calibration on 160M and 10M?
Hi all, Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38. Suggestions? Thanks in advance, Rob AB7CF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 11kHz DC noise
Hi Ahti and all, Ahti, your note arrived just as I finished my investigation into the SDR1K 11kHz DC noise problem. To keep the chain going, I'll share my findings via your note. First, the hump is a sound card only problem. Not applicable to the 5K. Second there are two causes that can mix together. For critical discussion here goes... 1. Zero Hz defects in the sound card A/D process. These defects (at least in the FA-66) are constant magnitude and non additive to the signal. The hump is masked when the received signal + noise is higher than the defect noise. (The reverse is also true if the signal + noise is lower then the hump.) In my FA-66 the magnitude is ~ -100dBm. In a noisy environment like mine, when the 1K preamp is on, the defect is quickly masked. The only current way to reduce the hump is to buy the Atlas/Ozy/Janus combination from TAPR or a nice new 5K. The Ozy/Janus solution is approximately $300 plus a fair amount of time. 2. A ground loop between sound card and 1K. In my case the hump was about -80dBm and 2kHz wide. The ground loop noise is additive to the signal + noise making it quite a nuisance. It can be easily cured with a Radio Shack 270-054 isolation transformer and a stereo phono jack to 1/8th inch plug. The isolator goes between the 1K output jack and the sound card audio in. For fanatics, there is also a two channel EBTECH Hum Eliminator (~$60.) It's a wide frequency range (70kHz) version of the 270-054. The EBtech unit will result in a better frequency response at the high end of the panadapter display. Note that once I solved the ground loop problem, the zero Hz defects problem was unmasked, but for now I can live with it... Comments? Thanks for letting me ride on your note Ahti. 73's to all Rob AB7CF On Fri, 26 Oct 2007 08:47:36 +0300 Ahti Aintila [EMAIL PROTECTED] writes: On 26/10/2007, Gerald Capodieci [EMAIL PROTECTED] wrote: I apologize for being so late with this question or to repeat it again but, please someone point me to a definition of 11kHz DC noise and what problem it causes. I'm sure I have the problem too. I just don't recognize it. Thanks - Jerry Jerry, Some sound cards or SDR-1000/sound card combinations have very low frequency noise or hum (or even some small DC offset). That causes a hump on the left end of the Panadaptor noise floor (11.025 kHz down from your reception frequency in the older versions of PowerSDR or 9 kHz with the new PowerSDR). You may not see it, if your sound card has 48 kHz (or lower) sampling frequency, because it is outside your Panadaptor range. Switch on 96 or 192 kHz sampling, if your sound card can do it, then you may see it. In most cases this hump is just a cosmetic fault and does not make any harm to your normal bandwidth operation. If you want to get rid of the hump, buy the Flex-5000 or use HPSDR's Janus/Ozy combination with the SDR-1000 to replace the sound card. 73, Ahti OH2RZ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/12df5b14/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Heil GM-4 and FLEX-5000A
The GM4 is an unbalanced mic; however, just plug it into the rear Bal In jack. No other modifications are required. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Kallal Sent: Thursday, October 25, 2007 10:51 PM To: 'FlexRadio' Subject: [Flexradio] Heil GM-4 and FLEX-5000A I have a 5000A in route and am thinking about the inter-connections before it arrives. Julius, W2IHY, made up a cable for me to connect my Heil GM-4 boom mike to the SDR-1000. It included a 1/4 inch plug that plugs directly into the Presonus Firebox or the FA-66. Are those connections considered balanced or unbalanced? Is the GM-4 a balanced mike? The ideal would be to plug the 1/4 inch plug into the rear of the 5000A. I just did a ring out of the W2IHY cable with an ohm meter and discovered that the ring connection on the plug is not connected. I guess that means I need to wire the cable up to the front panel mike connector. If the GM-4 is a balanced mike, which I am unsure, then it might be possible to rewire the 1/4 inch plug to accommodate a balanced connection. Does anyone have experience with the GM-4? 73, Steve N6VL -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20 071025/4c65edbc/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
Check for power supply voltage. It must be at least 13.8 volts. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison Sent: Friday, October 26, 2007 6:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi all, Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38. Suggestions? Thanks in advance, Rob AB7CF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
Now, John, you know I pay very close attention to what is said in the reflector since I really have little interest in re-inventing the wheel and always prefer to let others be a little ahead of me. Thus, given some of the comments of the last few months there is a 50 amp non-switching power supply and a dedicated red LED voltmeter right beside the transverters in the Flex cubby and I am satisfied that under full load the voltage moves less than two tenths. However, your note about the 13.8 says MUST BE AT LEAST. So I am curious. Do you have any comments on voltages higher than 13.8? 73 Lee K9WRU - Original Message - From: John P Basilotto W5GI [EMAIL PROTECTED] To: 'Rob Dennison' [EMAIL PROTECTED]; flexradio@flex-radio.biz Sent: Friday, October 26, 2007 7:12 AM Subject: Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Check for power supply voltage. It must be at least 13.8 volts. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison Sent: Friday, October 26, 2007 6:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi all, Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38. Suggestions? Thanks in advance, Rob AB7CF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] ham radio deluxe
J. Crit Harley, MD, C.Ht. wrote: Jerry; Which waterfall are you talking about ... the one on the PowerSDR or the one in HDR and which part of HDR ... the PSK31 program or DM 780 program? Are you using a separate snd card for HDR or VAC? If the HDR PSK31 program ... what are your sndcard IN and OUT set to? Etc. Etc 73/Crit/K4BXN I'm just using VCOM to connect to HRD. I have not purchased VAC. I thought that if HRD was working with VCOM that I would be able to receive PSK and the others but not signal on PSK31. I have 4 and 16 running HRD autodetect. Yes to have I read all the knowledge base articles. I didn't think the were of much help. Jerry ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
Plus 10% of the nominal 13.8V should not be a problem for the 2SC2879s used in the SDR-1000. Gerald Gerald Youngblood, K5SDR FlexRadio Systems Ph: 512-535-4713 Fax: 512-233-5143 Email: [EMAIL PROTECTED] Web: www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Mushel Sent: Friday, October 26, 2007 7:29 AM To: John P Basilotto W5GI; 'Rob Dennison'; flexradio@flex-radio.biz Subject: Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Now, John, you know I pay very close attention to what is said in the reflector since I really have little interest in re-inventing the wheel and always prefer to let others be a little ahead of me. Thus, given some of the comments of the last few months there is a 50 amp non-switching power supply and a dedicated red LED voltmeter right beside the transverters in the Flex cubby and I am satisfied that under full load the voltage moves less than two tenths. However, your note about the 13.8 says MUST BE AT LEAST. So I am curious. Do you have any comments on voltages higher than 13.8? 73 Lee K9WRU - Original Message - From: John P Basilotto W5GI [EMAIL PROTECTED] To: 'Rob Dennison' [EMAIL PROTECTED]; flexradio@flex-radio.biz Sent: Friday, October 26, 2007 7:12 AM Subject: Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Check for power supply voltage. It must be at least 13.8 volts. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison Sent: Friday, October 26, 2007 6:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi all, Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38. Suggestions? Thanks in advance, Rob AB7CF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Using your Flex via VPN or remote Internet connection
How many of you have used your Flex via a remote connection? I have used my TS-2000 successfully via Go to My PC and Skype. I like the remote powering of the TS-2000 through the Ham Radio Deluxe. This works well. I am adding a transistorized power amp to this combo. What I would like to do is to control my Flex-1000 from the internet. The challenge has been the audio connection would have to be through analog connections to the Skype audio. I have tried using the virtual connection through the SDR software and it just will not work. This would be the way to do it, but you would have to map the PC audio out to the SDR audio in. This is the same difficulty you have playing back a WAV file on the PC to the SDR. I am sure someone has done it and that is why I am sending this out to the group. Also, who knows of a good ethernet remote control (multiple) switch that I can control the power on my different equipment (and antenna selection). Thanks Harry W9BR ** See what's new at http://www.aol.com -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/6e7be477/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] I goofed something up
Check TX settings in Ant panel. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512 535-5266 FAX512 233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick Sent: Friday, October 26, 2007 9:29 AM To: FlexRadio List Subject: [Flexradio] I goofed something up I can not key the 5K via the PTT Input on the back of the 5K. I'm sure I was able to before... I sometimes use a footswitch to hold ptt in while I'm sending cw in case I pause and don't want to switch to receive. the rig will key using Vox, Mox, and cw with break In enabled It is the same with either PWSDR version using Beta v1.10.3 or latest svn I do use vCom and have the PTT Control enabled with a virtual port cableing of com 9com4 what am I doing wrong? - Imagine, if you will, a world without hypothetical situations. - Bill H. in Chicagoland webcams at http://76.16.160.118:8080/ weather at http://hhweather.webhop.org ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] I goofed something up
I can not key the 5K via the PTT Input on the back of the 5K. I'm sure I was able to before... I sometimes use a footswitch to hold ptt in while I'm sending cw in case I pause and don't want to switch to receive. the rig will key using Vox, Mox, and cw with break In enabled It is the same with either PWSDR version using Beta v1.10.3 or latest svn I do use vCom and have the PTT Control enabled with a virtual port cableing of com 9com4 what am I doing wrong? - Imagine, if you will, a world without hypothetical situations. - Bill H. in Chicagoland webcams at http://76.16.160.118:8080/ weather at http://hhweather.webhop.org ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] ptt is working again
After powering down the rig and turning off the Power Supply. A restart returned the PTT footswitch to normal operation, keying the rig in any mode. I had shut down PWSDR, and even rebooted the computer, but didn't think of powering down the radio via the power supply till after I sent the email. Apparently operating 6 meters (barefoot) is not good...even with HF on ant 1 and the 6 meter antenna on Ant 3. - Build a system that even a fool can use and only a fool will want to use it. - Bill H. in Chicagoland webcams at http://76.16.160.118:8080/ weather at http://hhweather.webhop.org ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Heil GM-4 and FLEX-5000A
John, So then a connection to between tip and sleeve is enough? Even with the ring unconnected? 73, Steve N6VL -Original Message- From: John P Basilotto W5GI [mailto:[EMAIL PROTECTED] Sent: Friday, October 26, 2007 5:18 AM To: 'Steve Kallal'; 'FlexRadio' Subject: RE: [Flexradio] Heil GM-4 and FLEX-5000A The GM4 is an unbalanced mic; however, just plug it into the rear Bal In jack. No other modifications are required. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Kallal Sent: Thursday, October 25, 2007 10:51 PM To: 'FlexRadio' Subject: [Flexradio] Heil GM-4 and FLEX-5000A I have a 5000A in route and am thinking about the inter-connections before it arrives. Julius, W2IHY, made up a cable for me to connect my Heil GM-4 boom mike to the SDR-1000. It included a 1/4 inch plug that plugs directly into the Presonus Firebox or the FA-66. Are those connections considered balanced or unbalanced? Is the GM-4 a balanced mike? The ideal would be to plug the 1/4 inch plug into the rear of the 5000A. I just did a ring out of the W2IHY cable with an ohm meter and discovered that the ring connection on the plug is not connected. I guess that means I need to wire the cable up to the front panel mike connector. If the GM-4 is a balanced mike, which I am unsure, then it might be possible to rewire the 1/4 inch plug to accommodate a balanced connection. Does anyone have experience with the GM-4? 73, Steve N6VL -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20 071025/4c65edbc/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] ham radio deluxe
Jerry, You need to review the VAC KB article again. It is very comprehensive. VAC is used to route audio in and out of PowerSDR to third-party programs without having to use additional cables to make an interface. vCom is just a serial port null modem emulator that will allow CAT commands only to be passed back and forth from PowerSDR to third-party programs. vCom does not pass any audio signals. That is the function of VAC This KB article is specific to MixW, but the concept is the same for all soundcard program. http://kb.flex-radio.com/article.aspx?id=10218 -Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Harley Sent: Friday, October 26, 2007 8:36 AM To: J. Crit Harley, MD, C.Ht.; FlexRadio Subject: Re: [Flexradio] ham radio deluxe J. Crit Harley, MD, C.Ht. wrote: Jerry; Which waterfall are you talking about ... the one on the PowerSDR or the one in HDR and which part of HDR ... the PSK31 program or DM 780 program? Are you using a separate snd card for HDR or VAC? If the HDR PSK31 program ... what are your sndcard IN and OUT set to? Etc. Etc 73/Crit/K4BXN I'm just using VCOM to connect to HRD. I have not purchased VAC. I thought that if HRD was working with VCOM that I would be able to receive PSK and the others but not signal on PSK31. I have 4 and 16 running HRD autodetect. Yes to have I read all the knowledge base articles. I didn't think the were of much help. Jerry ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Using your Flex via VPN or remote Internet connection
Harry, There are several KB articles on what you want to accomplish. You CAN route audio in and out of PowerSDR using VAC and VoIP software for remote operation. It does work and many people are doing it. The following article is how to setup IP Sound with PowerSDR, but the concepts are directly applicable to Skype. http://kb.flex-radio.com/article.aspx?id=10082 Here are a few articles on how to do remote operation with PowerSDR http://kb.flex-radio.com/Article.aspx?id=10083 http://kb.flex-radio.com/Article.aspx?id=10218 http://kb.flex-radio.com/article.aspx?id=10376 -Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, October 26, 2007 9:43 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Using your Flex via VPN or remote Internet connection How many of you have used your Flex via a remote connection? I have used my TS-2000 successfully via Go to My PC and Skype. I like the remote powering of the TS-2000 through the Ham Radio Deluxe. This works well. I am adding a transistorized power amp to this combo. What I would like to do is to control my Flex-1000 from the internet. The challenge has been the audio connection would have to be through analog connections to the Skype audio. I have tried using the virtual connection through the SDR software and it just will not work. This would be the way to do it, but you would have to map the PC audio out to the SDR audio in. This is the same difficulty you have playing back a WAV file on the PC to the SDR. I am sure someone has done it and that is why I am sending this out to the group. Also, who knows of a good ethernet remote control (multiple) switch that I can control the power on my different equipment (and antenna selection). Thanks Harry W9BR ** See what's new at http://www.aol.com -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/6e7be477/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] SDR-1K + A/J/O + WinDRM config
Can anyone offer guidelines on config of WinDRM when using HPSDR A/J/O instead of a conventional soundcard. I note that the HPSDR stuff is not recognized as a selectable soundcard (since it really isn't one) in the WinDRM setup. Perhaps it's just a simple matter of selecting a different sound card from the available ones and use that sound card in conjunction with the VAC in and out channels? Thanks, Pete, N3EVL Peter J. Thompson Principal Software Engineer EMC Software EMC Corporation 150 Cambridge Park Drive Cambridge, MA 02140 -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/9bbf6127/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] I goofed something up
I'm using the new firmware also. v0.1.1.2 On 10/26/2007 10:33:39 AM, Joe - AB1DO ([EMAIL PROTECTED]) wrote: Hi Bill, Funny you mention it - it just happened to me for the first time ever this week. In fact on 2 occasions. I too use a foot pedal. I also noticed that concurrently the power switch will not switch the rig off anymore and had to resort to powering down the rig via the power supply. I'm starting to wonder if it is related to the latest version of the firmware (v 0.1.1.2) as that is about all I have changed. I have not tried to revert back to v 0.1.1.1. What version are you using? 73 de Joe - AB1DO Sent: Friday, October 26, 2007 10:29 Subject: [Flexradio] I goofed something up I can not key the 5K via the PTT Input on the back of the 5K. I'm sure I was able to before... I sometimes use a footswitch to hold ptt in while I'm sending cw in case I pause and don't want to switch to receive. the rig will key using Vox, Mox, and cw with break In enabled It is the same with either PWSDR version using Beta v1.10.3 or latest svn I do use vCom and have the PTT Control enabled with a virtual port ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] ham radio deluxe
Jerry, VAC (Virtual audio Cable) is needed to tie the SW audio out of HRD to the audio out of the radio (via SW) .. The other way is to use a sound card (maybe the computer's built-in) tied to the audio out of the 1K to the soundcard input and visa-versa.. Hope that helps 73, Dudley WA5QPZ At 07:36 AM 10/26/2007, Jerry Harley wrote: J. Crit Harley, MD, C.Ht. wrote: Jerry; Which waterfall are you talking about ... the one on the PowerSDR or the one in HDR and which part of HDR ... the PSK31 program or DM 780 program? Are you using a separate snd card for HDR or VAC? If the HDR PSK31 program ... what are your sndcard IN and OUT set to? Etc. Etc 73/Crit/K4BXN I'm just using VCOM to connect to HRD. I have not purchased VAC. I thought that if HRD was working with VCOM that I would be able to receive PSK and the others but not signal on PSK31. I have 4 and 16 running HRD autodetect. Yes to have I read all the knowledge base articles. I didn't think the were of much help. Jerry ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/a66ceefa/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] I goofed something up
Hi Bill, Funny you mention it - it just happened to me for the first time ever this week. In fact on 2 occasions. I too use a foot pedal. I also noticed that concurrently the power switch will not switch the rig off anymore and had to resort to powering down the rig via the power supply. I'm starting to wonder if it is related to the latest version of the firmware (v 0.1.1.2) as that is about all I have changed. I have not tried to revert back to v 0.1.1.1. What version are you using? 73 de Joe - AB1DO Sent: Friday, October 26, 2007 10:29 Subject: [Flexradio] I goofed something up I can not key the 5K via the PTT Input on the back of the 5K. I'm sure I was able to before... I sometimes use a footswitch to hold ptt in while I'm sending cw in case I pause and don't want to switch to receive. the rig will key using Vox, Mox, and cw with break In enabled It is the same with either PWSDR version using Beta v1.10.3 or latest svn I do use vCom and have the PTT Control enabled with a virtual port cableing of com 9com4 what am I doing wrong? - Imagine, if you will, a world without hypothetical situations. - Bill H. in Chicagoland webcams at http://76.16.160.118:8080/ weather at http://hhweather.webhop.org ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Commcat Interface
I've been using it for months with the 1000 and now the 5000. Using Virtual software but it's so great to see a station on the web spotting, double click on it and your radio goes there including all the set up for split etc. Howard Nurse is great to work with regarding any problems. Phil Philip LaMarche LaMarche Enterprises, Inc. www.instantgourmetspices.com www.w9dvm.com 800-395-7795 pin 02 727-944-3226 FAX 727-937-8834 NASFT 30210 W9DVM -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of KQ8RP Sent: Friday, October 26, 2007 12:13 PM To: FlexRadio Subject: [Flexradio] Commcat Interface I just downloaded there demo at http://www.commcat.com/ccldownloads.php used the TS2000 on the Flex and it seems to be working. Anyone else using this with Flex? I heard W8ERN talking about it today, check out his website http://w8ern.myqsx.net/ Scott Gordon Phone: (888) 428-6622 Fax (866) 505-7171 http://www.srgproperty.com -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20 071026/387dfea3/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Commcat Interface
I just downloaded there demo at http://www.commcat.com/ccldownloads.php used the TS2000 on the Flex and it seems to be working. Anyone else using this with Flex? I heard W8ERN talking about it today, check out his website http://w8ern.myqsx.net/ Scott Gordon Phone: (888) 428-6622 Fax (866) 505-7171 http://www.srgproperty.com -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/387dfea3/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex HRD (Jerry Harley)
I just got HRD/DM780 to work. I have a SDR1k with a PreSonus card. I use vCom. When I told DM780 to use my computer’s sound card as input I got the waterfall and signals were decoded. Seems counter intuitive but I can guess why it works. Gordon, KA2NLM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.11/1094 - Release Date: 10/26/2007 8:50 AM -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/2beba8b2/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
Hi John, Checked and my power supply voltage was right on at the 1K terminals at 13.8 volts. Increased the voltage to 13.9 with no improvement. Calibration still fails at 38.0 dB. What's the significance of the Use Advance Calibration Routine? Thanks in advance for further insight... 73's Rob AB7CF On Fri, 26 Oct 2007 07:12:26 -0500 John P Basilotto W5GI [EMAIL PROTECTED] writes: Check for power supply voltage. It must be at least 13.8 volts. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison Sent: Friday, October 26, 2007 6:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi all, Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38. Suggestions? Thanks in advance, Rob AB7CF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] SDR-1K + A/J/O + WinDRM config
If you are talking about using it with the Virtual Audio Cable (VAC) program, there is nothing different. Ray J w9ray [EMAIL PROTECTED] wrote: Can anyone offer guidelines on config of WinDRM when using HPSDR A/J/O instead of a conventional soundcard. I note that the HPSDR stuff is not recognized as a selectable soundcard (since it really isn't one) in the WinDRM setup. Perhaps it's just a simple matter of selecting a different sound card from the available ones and use that sound card in conjunction with the VAC in and out channels? Thanks, Pete, N3EVL Peter J. Thompson Principal Software Engineer EMC Software EMC Corporation 150 Cambridge Park Drive Cambridge, MA 02140 -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/9bbf6127/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
Hi Rob, I had a similar problem with my SDR1K. I was told to check the expert setup box and change the voltage reading for your particular sound card. Apparently my sound card was not putting out enough voltage. I'm at work now and I don't recall where this setting is located. It did work for me after a recalibration. Tim Ellison emailed me on how to check the soundcard voltage. Hope this helpsEdwin MarzanAB2VW To: [EMAIL PROTECTED] Date: Fri, 26 Oct 2007 14:00:46 -0700 From: [EMAIL PROTECTED] CC: flexradio@flex-radio.biz Subject: Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi John, Checked and my power supply voltage was right on at the 1K terminals at 13.8 volts. Increased the voltage to 13.9 with no improvement. Calibration still fails at 38.0 dB. What's the significance of the Use Advance Calibration Routine? Thanks in advance for further insight... 73's Rob AB7CF On Fri, 26 Oct 2007 07:12:26 -0500 John P Basilotto W5GI [EMAIL PROTECTED] writes: Check for power supply voltage. It must be at least 13.8 volts.John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax 512-233-5143 www.flex-radio.com-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison Sent: Friday, October 26, 2007 6:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] 1K RF Amp Calibration on 160M and 10M?Hi all,Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38.Suggestions?Thanks in advance, Rob AB7CF___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ _ Peek-a-boo FREE Tricks Treats for You! http://www.reallivemoms.com?ocid=TXT_TAGHMloc=us -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/f7f180cc/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Mac OS X Leopard and Flex 5000
I just installed a copy of Mac's new OS Leopard. Using Boot Camp I setup XP Pro to work the Flex 5000. I discovered I could NOT get the driver to talk to the radio. I then decided to try Vista Premium in place of XP Pro and it seems to work fine with the 5000 under Leopard's Boot Camp. It is possible that my XP Pro install was faulty in some way. In checking the 1394 IRQ assignments I noted that there are 2 devices assigned to the same IRQ in the device manager of Xp Pro (at #19) . In the case of Vista it would seem that the 1394 firewire port is the only device assigned to interrupt # 19. On the other hand XP PRO running on a PC also has two devices assigned to interrupt 19 and it , as we know, has no trouble with the 5000. I am ONLY mentioning this to ease the suffering of someone else who MAY encounter the same result with Leopard. Again, my original install of XP Pro in leopard may simply have been faulty. I will gather my energy ASAP and do a second XP Pro install to verify if the case I found is universally truly there. -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/723aa4ca/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] SDR-1K + A/J/O + WinDRM config
The WinDRM setup instructions at http://kb.flex-radio.com/article.aspx?id=10071 shows the example soundcard config as: RxInput: VAC 2 TxOutput: VAC 1 Voice Input: Delta 44 3/4 Voice Output Delta 44 1/2 I assume that in this config, the delta44 is the soundcard being used by the SDR? I can't use the HPDSR in its place here since it's not an option in the list. Can this be any available sound card on the system? Pete, N3EVL - Original Message - From: Ray J [EMAIL PROTECTED] To: FlexRadio@flex-radio.biz Sent: Friday, October 26, 2007 5:30 PM Subject: Re: [Flexradio] SDR-1K + A/J/O + WinDRM config If you are talking about using it with the Virtual Audio Cable (VAC) program, there is nothing different. Ray J w9ray [EMAIL PROTECTED] wrote: Can anyone offer guidelines on config of WinDRM when using HPSDR A/J/O instead of a conventional soundcard. I note that the HPSDR stuff is not recognized as a selectable soundcard (since it really isn't one) in the WinDRM setup. Perhaps it's just a simple matter of selecting a different sound card from the available ones and use that sound card in conjunction with the VAC in and out channels? Thanks, Pete, N3EVL Peter J. Thompson Principal Software Engineer EMC Software EMC Corporation 150 Cambridge Park Drive Cambridge, MA 02140 -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/9bbf6127/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] SDR-1K + A/J/O + WinDRM config
With the 1000, the delta 44 is all you need for WinDRM or DRMs' dream. No additional sound card is needed unless you want to use a USB headset (i.e. Logitech 250/350 for) then just select it for the voice input/output. I am waiting on delivery of the 5000 before I install the A/J/O for my SDR1000. However, I believe VAC can still be used for the RxInput and TxOutput (as used now). Then, I would install a second sound card (USB or Logitech headset) for Voice Input and Voice Output since there are no additional inputs/outputs available like the delta 44 has. WinDRM will recognize up to 8 sound card appearances. Mel, K0PFX - Original Message - From: n3evl [EMAIL PROTECTED] To: Ray J [EMAIL PROTECTED]; FlexRadio@flex-radio.biz Sent: Friday, October 26, 2007 6:43 PM Subject: Re: [Flexradio] SDR-1K + A/J/O + WinDRM config The WinDRM setup instructions at http://kb.flex-radio.com/article.aspx?id=10071 shows the example soundcard config as: RxInput: VAC 2 TxOutput: VAC 1 Voice Input: Delta 44 3/4 Voice Output Delta 44 1/2 I assume that in this config, the delta44 is the soundcard being used by the SDR? I can't use the HPDSR in its place here since it's not an option in the list. Can this be any available sound card on the system? Pete, N3EVL - Original Message - From: Ray J [EMAIL PROTECTED] To: FlexRadio@flex-radio.biz Sent: Friday, October 26, 2007 5:30 PM Subject: Re: [Flexradio] SDR-1K + A/J/O + WinDRM config If you are talking about using it with the Virtual Audio Cable (VAC) program, there is nothing different. Ray J w9ray [EMAIL PROTECTED] wrote: Can anyone offer guidelines on config of WinDRM when using HPSDR A/J/O instead of a conventional soundcard. I note that the HPSDR stuff is not recognized as a selectable soundcard (since it really isn't one) in the WinDRM setup. Perhaps it's just a simple matter of selecting a different sound card from the available ones and use that sound card in conjunction with the VAC in and out channels? Thanks, Pete, N3EVL Peter J. Thompson Principal Software Engineer EMC Software EMC Corporation 150 Cambridge Park Drive Cambridge, MA 02140 -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/9bbf6127/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
Hi Edwin and everyone, The (lack of) drive is an interesting point: My calibration settings seem uniformly lower then the factory settings. Starting from 160M to 10M here is a comparison of Gain By Band (dB:) 160 806040302017 151210 Factory: 43.0 48.1 45.5 44.4 45.0 46.6 46.9 42.2 44.7 38.6 AB7CF: 38.0 46.7 45.0 43.4 44.0 43.8 43.2 39.2 47.4 38.0 With the exception of 12 M, my calibration points are all lower then the factory values. Also the power out is generally more than with then the factory settings: On 20 Meters Factory: 102 Watts, AB7CF: 106 Watts, on 160 Meters: Factory: 65 Watts, AB7CF 87 Watts and on 10 Meters: Factory 59 Watts, AB7CF 63 Watts. So in general I'm getting more power out with the custom settings. Could this mean that my FA-66 drive is lower than the factory drive used for the initial calibration? If so, how do I change the FA-66 output levels? Thanks in advance for any advice! 73's Rob AB7CF On Fri, 26 Oct 2007 17:26:28 -0400 Edwin Marzan [EMAIL PROTECTED] writes: Hi Rob, I had a similar problem with my SDR1K. I was told to check the expert setup box and change the voltage reading for your particular sound card. Apparently my sound card was not putting out enough voltage. I'm at work now and I don't recall where this setting is located. It did work for me after a recalibration. Tim Ellison emailed me on how to check the soundcard voltage. Hope this helps Edwin Marzan AB2VW To: [EMAIL PROTECTED] Date: Fri, 26 Oct 2007 14:00:46 -0700 From: [EMAIL PROTECTED] CC: flexradio@flex-radio.biz Subject: Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi John, Checked and my power supply voltage was right on at the 1K terminals at 13.8 volts. Increased the voltage to 13.9 with no improvement. Calibration still fails at 38.0 dB. What's the significance of the Use Advance Calibration Routine? Thanks in advance for further insight... 73's Rob AB7CF On Fri, 26 Oct 2007 07:12:26 -0500 John P Basilotto W5GI [EMAIL PROTECTED] writes: Check for power supply voltage. It must be at least 13.8 volts. John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512-535-5266 Fax 512-233-5143 www.flex-radio.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Dennison Sent: Friday, October 26, 2007 6:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] 1K RF Amp Calibration on 160M and 10M? Hi all, Ended up with failures on 160M and 10M when I went through my 1K RF amp calibration. Was using a dummy load attached directly to the rf output plug on the 1K. Calibration was successful on all bands except the two mentioned. On those two bands the calibration failed with a gain of 38. Suggestions? Thanks in advance, Rob AB7CF ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ Peek-a-boo FREE Tricks Treats for You! Get 'em! -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/eae55772/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
Re: [Flexradio] 1K RF Amp Calibration on 160M and 10M?
://www.flex-radio.com/ Peek-a-boo FREE Tricks Treats for You! Get 'em! _ Climb to the top of the charts! Play Star Shuffle: the word scramble challenge with star power. http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_oct -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071026/1911ca3b/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/