Re: [Flexradio] Flex 5K locking up
Since the problem got worse after installing a new video card and running a second monitor in extended desktop try these few things. 1) Update the video card drivers to the latest version from here http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32 2) Try running PowerSDR in the opposite monitor. If you normally run it on the right monitor (extended monitor) try running it in the right monitor instead (primary monitor). 3) Update the drivers for the onboard Ethernet you are using. 4) Update the motherboard chipset drivers. 73 Dave wo2x -- From: "Mario Aviles" Sent: Saturday, January 30, 2010 11:16 PM To: "Neal Campbell" Cc: Subject: Re: [Flexradio] Flex 5K locking up I checked and there is no other PCI slot and the 1394 port is inborad. I guess I am doomed? Mario/YS1MAE - Original Message - From: Neal Campbell To: Mario Aviles Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz Sent: Saturday, January 30, 2010 9:32 PM Subject: Re: [Flexradio] Flex 5K locking up w.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
I checked and there is no other PCI slot and the 1394 port is inborad. I guess
I am doomed?
Mario/YS1MAE
- Original Message -
From: Neal Campbell
To: Mario Aviles
Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz
Sent: Saturday, January 30, 2010 9:32 PM
Subject: Re: [Flexradio] Flex 5K locking up
There is no way to change the IRQ, you are stuck with it. If there is another
pci slot in your computer (and assuming that you are using a non-onboard
firewire port), move your card and then see if/what IRQ it shares a device with.
The USB wifi stick is still a good alternative though!
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
On Sat, Jan 30, 2010 at 10:24 PM, Mario Aviles
wrote:
Indeed, I noticed that it locked up when accesing the internet or mail
program. The latency is around 2000 and this is normal from before I ade the
changes. Is there a way to change the IRQ on the network card? I would like to
access the Internet on this computer. Yes, I am using RJ45
Mario
- Original Message -
From: Neal Campbell
To: Mario Aviles
Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz
Sent: Saturday, January 30, 2010 9:18 PM
Subject: Re: [Flexradio] Flex 5K locking up
It does, you are sharing the interrupt with your lan port. I assume you
are using the RJ45 plug in the motherboard?
You can try to disable it and use a USB wifi stick (or not use the
internet at all),
If you need help on how to disable it, let me know!
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
On Sat, Jan 30, 2010 at 9:45 PM, Mario Aviles
wrote:
Hi Neal:
What I show is the following:
PCI 20 AGERE HOST COntroller OHCI compatible with IEEE1394
PCI 20 Netwrok connection Intel (R) PRO /100 VE
Let me know if this helps
Mario/YS1MAE
- Original Message -
From: Neal Campbell
To: Mario Aviles
Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz
Sent: Saturday, January 30, 2010 6:40 PM
Subject: Re: [Flexradio] Flex 5K locking up
Go to your control panel, double-click on System and when that window
pops up, go to the Hardware tab, then click on the button called Device Manager.
When the device manager window appears, go to the views menu at the
top of the window and select View by Connection. When this display appears,
click on the plus sign by the IRQ line,
When the list of devices, sorted by the interrupt (IRQ) appears, look
for your firewire card. To the left of it will be a number which is the
interrupt number assigned to your fiirewire card. Tell us what other devices
have the same number besides them as your firewire card. That could help us
tremendously!
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
On Sat, Jan 30, 2010 at 6:42 PM, Mario Aviles
wrote:
Hi Tim:
Did that and no change, I was thinking about uninstalling
everything, firewire driver, PSDR and starting from scratch.
73´s
Mario
- Original Message - From: "Tim Ellison"
To: "Mario Aviles" ; "Dudley Hurry"
Cc:
Sent: Saturday, January 30, 2010 5:33 PM
Subject: RE: [Flexradio] Flex 5K locking up
Try resetting your database.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles
Sent: Saturday, January 30, 2010 6:27 PM
To: Dudley Hurry
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex 5K locking up
Hi Group:
Now I don´t know what happened, after I did these changes now I
dont have
audio and I get a strange signal on TX no power out. The unit is
receiving I
can see that on the pan display as I move
Re: [Flexradio] Flex 5K locking up
There is no way to change the IRQ, you are stuck with it. If there is another pci slot in your computer (and assuming that you are using a non-onboard firewire port), move your card and then see if/what IRQ it shares a device with. The USB wifi stick is still a good alternative though! Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Jan 30, 2010 at 10:24 PM, Mario Aviles wrote: > Indeed, I noticed that it locked up when accesing the internet or mail > program. The latency is around 2000 and this is normal from before I ade the > changes. Is there a way to change the IRQ on the network card? I would like > to access the Internet on this computer. Yes, I am using RJ45 > > Mario > > - Original Message - > *From:* Neal Campbell > *To:* Mario Aviles > *Cc:* Tim Ellison ; Dudley Hurry; > flexradio@flex-radio.biz > *Sent:* Saturday, January 30, 2010 9:18 PM > *Subject:* Re: [Flexradio] Flex 5K locking up > > It does, you are sharing the interrupt with your lan port. I assume you are > using the RJ45 plug in the motherboard? > > You can try to disable it and use a USB wifi stick (or not use the internet > at all), > > If you need help on how to disable it, let me know! > > Neal Campbell > Abroham Neal Software > www.abrohamnealsoftware.com > (540) 645 5394 NEW PHONE NUMBER > > Amateur Radio: K3NC > Blog: http://www.abrohamnealsoftware.com/blog/ > DXBase bug reports: email to ca...@dxbase.fogbugz.com > Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ > > > > > > On Sat, Jan 30, 2010 at 9:45 PM, Mario Aviles > wrote: > >> Hi Neal: >> >> What I show is the following: >> >> PCI 20 AGERE HOST COntroller OHCI compatible with IEEE1394 >> PCI 20 Netwrok connection Intel (R) PRO /100 VE >> >> Let me know if this helps >> >> Mario/YS1MAE >> >> - Original Message - >> *From:* Neal Campbell >> *To:* Mario Aviles >> *Cc:* Tim Ellison ; Dudley Hurry; >> flexradio@flex-radio.biz >> *Sent:* Saturday, January 30, 2010 6:40 PM >> *Subject:* Re: [Flexradio] Flex 5K locking up >> >> Go to your control panel, double-click on System and when that window pops >> up, go to the Hardware tab, then click on the button called Device Manager. >> >> When the device manager window appears, go to the views menu at the top of >> the window and select View by Connection. When this display appears, click >> on the plus sign by the IRQ line, >> >> When the list of devices, sorted by the interrupt (IRQ) appears, look for >> your firewire card. To the left of it will be a number which is the >> interrupt number assigned to your fiirewire card. Tell us what other devices >> have the same number besides them as your firewire card. That could help us >> tremendously! >> >> 73 >> Neal Campbell >> Abroham Neal Software >> www.abrohamnealsoftware.com >> (540) 645 5394 NEW PHONE NUMBER >> >> Amateur Radio: K3NC >> Blog: http://www.abrohamnealsoftware.com/blog/ >> DXBase bug reports: email to ca...@dxbase.fogbugz.com >> Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ >> >> >> >> >> >> On Sat, Jan 30, 2010 at 6:42 PM, Mario Aviles >> wrote: >> >>> Hi Tim: >>> >>> Did that and no change, I was thinking about uninstalling everything, >>> firewire driver, PSDR and starting from scratch. >>> >>> 73´s >>> >>> Mario >>> >>> - Original Message - From: "Tim Ellison" >>> To: "Mario Aviles" ; "Dudley Hurry" < >>> jhu...@austin.rr.com> >>> >>> Cc: >>> Sent: Saturday, January 30, 2010 5:33 PM >>> Subject: RE: [Flexradio] Flex 5K locking up >>> >>> >>> >>> Try resetting your database. >>> >>> >>> -Tim >>> >>> >>> -Original Message- >>> From: flexradio-boun...@flex-radio.biz [mailto: >>> flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles >>> Sent: Saturday, January 30, 2010 6:27 PM >>> To: Dudley Hurry >>> Cc: flexradio@flex-radio.biz >>> Subject: Re: [Flexradio] Flex 5K locking up >>> >>> Hi Group: >>> >>> Now I don´t know what happened, after I did these changes now I
Re: [Flexradio] Flex 5K locking up
Indeed, I noticed that it locked up when accesing the internet or mail program.
The latency is around 2000 and this is normal from before I ade the changes. Is
there a way to change the IRQ on the network card? I would like to access the
Internet on this computer. Yes, I am using RJ45
Mario
- Original Message -
From: Neal Campbell
To: Mario Aviles
Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz
Sent: Saturday, January 30, 2010 9:18 PM
Subject: Re: [Flexradio] Flex 5K locking up
It does, you are sharing the interrupt with your lan port. I assume you are
using the RJ45 plug in the motherboard?
You can try to disable it and use a USB wifi stick (or not use the internet
at all),
If you need help on how to disable it, let me know!
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
On Sat, Jan 30, 2010 at 9:45 PM, Mario Aviles
wrote:
Hi Neal:
What I show is the following:
PCI 20 AGERE HOST COntroller OHCI compatible with IEEE1394
PCI 20 Netwrok connection Intel (R) PRO /100 VE
Let me know if this helps
Mario/YS1MAE
- Original Message -
From: Neal Campbell
To: Mario Aviles
Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz
Sent: Saturday, January 30, 2010 6:40 PM
Subject: Re: [Flexradio] Flex 5K locking up
Go to your control panel, double-click on System and when that window
pops up, go to the Hardware tab, then click on the button called Device Manager.
When the device manager window appears, go to the views menu at the top
of the window and select View by Connection. When this display appears, click
on the plus sign by the IRQ line,
When the list of devices, sorted by the interrupt (IRQ) appears, look for
your firewire card. To the left of it will be a number which is the interrupt
number assigned to your fiirewire card. Tell us what other devices have the
same number besides them as your firewire card. That could help us tremendously!
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
On Sat, Jan 30, 2010 at 6:42 PM, Mario Aviles
wrote:
Hi Tim:
Did that and no change, I was thinking about uninstalling everything,
firewire driver, PSDR and starting from scratch.
73´s
Mario
- Original Message - From: "Tim Ellison"
To: "Mario Aviles" ; "Dudley Hurry"
Cc:
Sent: Saturday, January 30, 2010 5:33 PM
Subject: RE: [Flexradio] Flex 5K locking up
Try resetting your database.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles
Sent: Saturday, January 30, 2010 6:27 PM
To: Dudley Hurry
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex 5K locking up
Hi Group:
Now I don´t know what happened, after I did these changes now I dont
have
audio and I get a strange signal on TX no power out. The unit is
receiving I
can see that on the pan display as I move frecuencies but no audio out
Any ideas?
Mario
- Original Message - From: "Dudley Hurry"
To: "Mario Aviles"
Cc:
Sent: Friday, January 29, 2010 11:36 PM
Subject: Re: [Flexradio] Flex 5K locking up
Mario,
You said your latency is 15119us?? You should get the latency below
2000us to be consistent, some have gotten core2Duos to run under
100us.
Be sure to turn the Wireless and bluetooth drivers off, and make sure
your Power Options in the control panel is set to High Performance.
Other
than that..
What are the details? Of the system and what versions of PowerSDR
and FW
are you trying to run?
73,
Dudley
WA5QPZ
Mario Aviles wrote:
Hi Group:
I know this question has been asked before but I could not find the
answer so here it goes,
My Flex 5K was running ok, some lockups once in a while but not as
bad as
now that when the DX summit page is refreshed or while surfing the
web it
happens. (it happened several times while writing this email)
Re: [Flexradio] Flex 5K locking up
It does, you are sharing the interrupt with your lan port. I assume you are using the RJ45 plug in the motherboard? You can try to disable it and use a USB wifi stick (or not use the internet at all), If you need help on how to disable it, let me know! Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Jan 30, 2010 at 9:45 PM, Mario Aviles wrote: > Hi Neal: > > What I show is the following: > > PCI 20 AGERE HOST COntroller OHCI compatible with IEEE1394 > PCI 20 Netwrok connection Intel (R) PRO /100 VE > > Let me know if this helps > > Mario/YS1MAE > > - Original Message - > *From:* Neal Campbell > *To:* Mario Aviles > *Cc:* Tim Ellison ; Dudley Hurry; > flexradio@flex-radio.biz > *Sent:* Saturday, January 30, 2010 6:40 PM > *Subject:* Re: [Flexradio] Flex 5K locking up > > Go to your control panel, double-click on System and when that window pops > up, go to the Hardware tab, then click on the button called Device Manager. > > When the device manager window appears, go to the views menu at the top of > the window and select View by Connection. When this display appears, click > on the plus sign by the IRQ line, > > When the list of devices, sorted by the interrupt (IRQ) appears, look for > your firewire card. To the left of it will be a number which is the > interrupt number assigned to your fiirewire card. Tell us what other devices > have the same number besides them as your firewire card. That could help us > tremendously! > > 73 > Neal Campbell > Abroham Neal Software > www.abrohamnealsoftware.com > (540) 645 5394 NEW PHONE NUMBER > > Amateur Radio: K3NC > Blog: http://www.abrohamnealsoftware.com/blog/ > DXBase bug reports: email to ca...@dxbase.fogbugz.com > Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ > > > > > > On Sat, Jan 30, 2010 at 6:42 PM, Mario Aviles > wrote: > >> Hi Tim: >> >> Did that and no change, I was thinking about uninstalling everything, >> firewire driver, PSDR and starting from scratch. >> >> 73´s >> >> Mario >> >> - Original Message - From: "Tim Ellison" >> To: "Mario Aviles" ; "Dudley Hurry" < >> jhu...@austin.rr.com> >> >> Cc: >> Sent: Saturday, January 30, 2010 5:33 PM >> Subject: RE: [Flexradio] Flex 5K locking up >> >> >> >> Try resetting your database. >> >> >> -Tim >> >> >> -Original Message- >> From: flexradio-boun...@flex-radio.biz [mailto: >> flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles >> Sent: Saturday, January 30, 2010 6:27 PM >> To: Dudley Hurry >> Cc: flexradio@flex-radio.biz >> Subject: Re: [Flexradio] Flex 5K locking up >> >> Hi Group: >> >> Now I don´t know what happened, after I did these changes now I dont have >> audio and I get a strange signal on TX no power out. The unit is receiving >> I >> can see that on the pan display as I move frecuencies but no audio out >> >> Any ideas? >> >> Mario >> >> - Original Message - From: "Dudley Hurry" >> To: "Mario Aviles" >> Cc: >> Sent: Friday, January 29, 2010 11:36 PM >> Subject: Re: [Flexradio] Flex 5K locking up >> >> >> Mario, >>> >>> You said your latency is 15119us?? You should get the latency below >>> 2000us to be consistent, some have gotten core2Duos to run under 100us. >>> Be sure to turn the Wireless and bluetooth drivers off, and make sure >>> your Power Options in the control panel is set to High Performance. >>> Other >>> than that.. >>> >>> What are the details? Of the system and what versions of PowerSDR and FW >>> are you trying to run? >>> >>> 73, >>> Dudley >>> >>> WA5QPZ >>> >>> >>> >>> Mario Aviles wrote: >>> >>>> Hi Group: >>>> >>>> I know this question has been asked before but I could not find the >>>> answer so here it goes, >>>> My Flex 5K was running ok, some lockups once in a while but not as bad >>>> as >>>> now that when the DX summit page is refreshed or while surfing the web >>>> it >>>> happens. (it happ
Re: [Flexradio] Flex 5K locking up
Hi Neal:
What I show is the following:
PCI 20 AGERE HOST COntroller OHCI compatible with IEEE1394
PCI 20 Netwrok connection Intel (R) PRO /100 VE
Let me know if this helps
Mario/YS1MAE
- Original Message -
From: Neal Campbell
To: Mario Aviles
Cc: Tim Ellison ; Dudley Hurry ; flexradio@flex-radio.biz
Sent: Saturday, January 30, 2010 6:40 PM
Subject: Re: [Flexradio] Flex 5K locking up
Go to your control panel, double-click on System and when that window pops
up, go to the Hardware tab, then click on the button called Device Manager.
When the device manager window appears, go to the views menu at the top of
the window and select View by Connection. When this display appears, click on
the plus sign by the IRQ line,
When the list of devices, sorted by the interrupt (IRQ) appears, look for
your firewire card. To the left of it will be a number which is the interrupt
number assigned to your fiirewire card. Tell us what other devices have the
same number besides them as your firewire card. That could help us tremendously!
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/
On Sat, Jan 30, 2010 at 6:42 PM, Mario Aviles
wrote:
Hi Tim:
Did that and no change, I was thinking about uninstalling everything,
firewire driver, PSDR and starting from scratch.
73´s
Mario
- Original Message - From: "Tim Ellison"
To: "Mario Aviles" ; "Dudley Hurry"
Cc:
Sent: Saturday, January 30, 2010 5:33 PM
Subject: RE: [Flexradio] Flex 5K locking up
Try resetting your database.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles
Sent: Saturday, January 30, 2010 6:27 PM
To: Dudley Hurry
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex 5K locking up
Hi Group:
Now I don´t know what happened, after I did these changes now I dont have
audio and I get a strange signal on TX no power out. The unit is receiving I
can see that on the pan display as I move frecuencies but no audio out
Any ideas?
Mario
- Original Message - From: "Dudley Hurry"
To: "Mario Aviles"
Cc:
Sent: Friday, January 29, 2010 11:36 PM
Subject: Re: [Flexradio] Flex 5K locking up
Mario,
You said your latency is 15119us?? You should get the latency below
2000us to be consistent, some have gotten core2Duos to run under 100us.
Be sure to turn the Wireless and bluetooth drivers off, and make sure
your Power Options in the control panel is set to High Performance. Other
than that..
What are the details? Of the system and what versions of PowerSDR and FW
are you trying to run?
73,
Dudley
WA5QPZ
Mario Aviles wrote:
Hi Group:
I know this question has been asked before but I could not find the
answer so here it goes,
My Flex 5K was running ok, some lockups once in a while but not as bad
as
now that when the DX summit page is refreshed or while surfing the web
it
happens. (it happened several times while writing this email)
Two changes since that time, installed DDUtil and installed a new two
monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory)
Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU
2.00GB RAM
Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us)
Any suggestions besides changing computer?
73´s
Mario/YS1MAE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.fle
Re: [Flexradio] Flex 5K locking up
Go to your control panel, double-click on System and when that window pops up, go to the Hardware tab, then click on the button called Device Manager. When the device manager window appears, go to the views menu at the top of the window and select View by Connection. When this display appears, click on the plus sign by the IRQ line, When the list of devices, sorted by the interrupt (IRQ) appears, look for your firewire card. To the left of it will be a number which is the interrupt number assigned to your fiirewire card. Tell us what other devices have the same number besides them as your firewire card. That could help us tremendously! 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Jan 30, 2010 at 6:42 PM, Mario Aviles wrote: > Hi Tim: > > Did that and no change, I was thinking about uninstalling everything, > firewire driver, PSDR and starting from scratch. > > 73´s > > Mario > > - Original Message - From: "Tim Ellison" > To: "Mario Aviles" ; "Dudley Hurry" < > jhu...@austin.rr.com> > > Cc: > Sent: Saturday, January 30, 2010 5:33 PM > Subject: RE: [Flexradio] Flex 5K locking up > > > > Try resetting your database. > > > -Tim > > > -Original Message- > From: flexradio-boun...@flex-radio.biz [mailto: > flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles > Sent: Saturday, January 30, 2010 6:27 PM > To: Dudley Hurry > Cc: flexradio@flex-radio.biz > Subject: Re: [Flexradio] Flex 5K locking up > > Hi Group: > > Now I don´t know what happened, after I did these changes now I dont have > audio and I get a strange signal on TX no power out. The unit is receiving > I > can see that on the pan display as I move frecuencies but no audio out > > Any ideas? > > Mario > > - Original Message - From: "Dudley Hurry" > To: "Mario Aviles" > Cc: > Sent: Friday, January 29, 2010 11:36 PM > Subject: Re: [Flexradio] Flex 5K locking up > > > Mario, >> >> You said your latency is 15119us?? You should get the latency below >> 2000us to be consistent, some have gotten core2Duos to run under 100us. >> Be sure to turn the Wireless and bluetooth drivers off, and make sure >> your Power Options in the control panel is set to High Performance. Other >> than that.. >> >> What are the details? Of the system and what versions of PowerSDR and FW >> are you trying to run? >> >> 73, >> Dudley >> >> WA5QPZ >> >> >> >> Mario Aviles wrote: >> >>> Hi Group: >>> >>> I know this question has been asked before but I could not find the >>> answer so here it goes, >>> My Flex 5K was running ok, some lockups once in a while but not as bad as >>> now that when the DX summit page is refreshed or while surfing the web it >>> happens. (it happened several times while writing this email) >>> >>> Two changes since that time, installed DDUtil and installed a new two >>> monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) >>> >>> Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU >>> 2.00GB RAM >>> >>> Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) >>> >>> Any suggestions besides changing computer? >>> >>> 73´s >>> >>> Mario/YS1MAE >>> ___ >>> FlexRadio Systems Mailing List >>> FlexRadio@flex-radio.biz >>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>> Knowledge Base: http://kc.flex-radio.com/ Homepage: >>> http://www.flex-radio.com/ >>> >>> >>> >> > > > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > > > > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
Hi Tim: Did that and no change, I was thinking about uninstalling everything, firewire driver, PSDR and starting from scratch. 73´s Mario - Original Message - From: "Tim Ellison" To: "Mario Aviles" ; "Dudley Hurry" Cc: Sent: Saturday, January 30, 2010 5:33 PM Subject: RE: [Flexradio] Flex 5K locking up Try resetting your database. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles Sent: Saturday, January 30, 2010 6:27 PM To: Dudley Hurry Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex 5K locking up Hi Group: Now I don´t know what happened, after I did these changes now I dont have audio and I get a strange signal on TX no power out. The unit is receiving I can see that on the pan display as I move frecuencies but no audio out Any ideas? Mario - Original Message - From: "Dudley Hurry" To: "Mario Aviles" Cc: Sent: Friday, January 29, 2010 11:36 PM Subject: Re: [Flexradio] Flex 5K locking up Mario, You said your latency is 15119us?? You should get the latency below 2000us to be consistent, some have gotten core2Duos to run under 100us. Be sure to turn the Wireless and bluetooth drivers off, and make sure your Power Options in the control panel is set to High Performance. Other than that.. What are the details? Of the system and what versions of PowerSDR and FW are you trying to run? 73, Dudley WA5QPZ Mario Aviles wrote: Hi Group: I know this question has been asked before but I could not find the answer so here it goes, My Flex 5K was running ok, some lockups once in a while but not as bad as now that when the DX summit page is refreshed or while surfing the web it happens. (it happened several times while writing this email) Two changes since that time, installed DDUtil and installed a new two monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU 2.00GB RAM Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) Any suggestions besides changing computer? 73´s Mario/YS1MAE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
Try resetting your database. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles Sent: Saturday, January 30, 2010 6:27 PM To: Dudley Hurry Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex 5K locking up Hi Group: Now I don´t know what happened, after I did these changes now I dont have audio and I get a strange signal on TX no power out. The unit is receiving I can see that on the pan display as I move frecuencies but no audio out Any ideas? Mario - Original Message - From: "Dudley Hurry" To: "Mario Aviles" Cc: Sent: Friday, January 29, 2010 11:36 PM Subject: Re: [Flexradio] Flex 5K locking up > Mario, > > You said your latency is 15119us?? You should get the latency below > 2000us to be consistent, some have gotten core2Duos to run under 100us. > Be sure to turn the Wireless and bluetooth drivers off, and make sure > your Power Options in the control panel is set to High Performance. Other > than that.. > > What are the details? Of the system and what versions of PowerSDR and FW > are you trying to run? > > 73, > Dudley > > WA5QPZ > > > > Mario Aviles wrote: >> Hi Group: >> >> I know this question has been asked before but I could not find the >> answer so here it goes, >> My Flex 5K was running ok, some lockups once in a while but not as bad as >> now that when the DX summit page is refreshed or while surfing the web it >> happens. (it happened several times while writing this email) >> >> Two changes since that time, installed DDUtil and installed a new two >> monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) >> >> Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU >> 2.00GB RAM >> >> Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) >> >> Any suggestions besides changing computer? >> >> 73´s >> >> Mario/YS1MAE >> ___ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flex-radio.com/ Homepage: >> http://www.flex-radio.com/ >> >> > ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
Hi Group: Now I don´t know what happened, after I did these changes now I dont have audio and I get a strange signal on TX no power out. The unit is receiving I can see that on the pan display as I move frecuencies but no audio out Any ideas? Mario - Original Message - From: "Dudley Hurry" To: "Mario Aviles" Cc: Sent: Friday, January 29, 2010 11:36 PM Subject: Re: [Flexradio] Flex 5K locking up Mario, You said your latency is 15119us?? You should get the latency below 2000us to be consistent, some have gotten core2Duos to run under 100us. Be sure to turn the Wireless and bluetooth drivers off, and make sure your Power Options in the control panel is set to High Performance. Other than that.. What are the details? Of the system and what versions of PowerSDR and FW are you trying to run? 73, Dudley WA5QPZ Mario Aviles wrote: Hi Group: I know this question has been asked before but I could not find the answer so here it goes, My Flex 5K was running ok, some lockups once in a while but not as bad as now that when the DX summit page is refreshed or while surfing the web it happens. (it happened several times while writing this email) Two changes since that time, installed DDUtil and installed a new two monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU 2.00GB RAM Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) Any suggestions besides changing computer? 73´s Mario/YS1MAE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
Hi Dudley: Thank you for your response. Checked the Power Option and it was not on High Performance, already changed it. Latency is now above 2000, and something strange is happening, on the FireWire device driver I set the Sample rate to 96KHZ, and the Sample rate on PSDR is at 96Khz, but when I turn on PSDR it changes to 48Khz on the Firewire Driver. the message SYsTEM CLOCK IS LOCKED appears even when PSDR is stopped. PSDR version 1.18.3, FireWire Driver 3.5.0.7171 and firmware 1.3.0.8. Bluetooth Driver is off, use wireless mouse and keyboard. Hi Neal: Thanks for your suggestion, checked all devices and no conflicts. Again,thanks for help Mario - Original Message - From: "Dudley Hurry" To: "Mario Aviles" Cc: Sent: Friday, January 29, 2010 11:36 PM Subject: Re: [Flexradio] Flex 5K locking up Mario, You said your latency is 15119us?? You should get the latency below 2000us to be consistent, some have gotten core2Duos to run under 100us. Be sure to turn the Wireless and bluetooth drivers off, and make sure your Power Options in the control panel is set to High Performance. Other than that.. What are the details? Of the system and what versions of PowerSDR and FW are you trying to run? 73, Dudley WA5QPZ Mario Aviles wrote: Hi Group: I know this question has been asked before but I could not find the answer so here it goes, My Flex 5K was running ok, some lockups once in a while but not as bad as now that when the DX summit page is refreshed or while surfing the web it happens. (it happened several times while writing this email) Two changes since that time, installed DDUtil and installed a new two monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU 2.00GB RAM Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) Any suggestions besides changing computer? 73´s Mario/YS1MAE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
Mario, You said your latency is 15119us?? You should get the latency below 2000us to be consistent, some have gotten core2Duos to run under 100us.Be sure to turn the Wireless and bluetooth drivers off, and make sure your Power Options in the control panel is set to High Performance. Other than that.. What are the details? Of the system and what versions of PowerSDR and FW are you trying to run? 73, Dudley WA5QPZ Mario Aviles wrote: Hi Group: I know this question has been asked before but I could not find the answer so here it goes, My Flex 5K was running ok, some lockups once in a while but not as bad as now that when the DX summit page is refreshed or while surfing the web it happens. (it happened several times while writing this email) Two changes since that time, installed DDUtil and installed a new two monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU 2.00GB RAM Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) Any suggestions besides changing computer? 73´s Mario/YS1MAE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] Flex 5K locking up
What is the IRQ of your firewire card and what other devices are sharing it (I bet one of your video cards is!) 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Jan 30, 2010 at 12:04 AM, Mario Aviles wrote: > Hi Group: > > I know this question has been asked before but I could not find the answer > so here it goes, > > My Flex 5K was running ok, some lockups once in a while but not as bad as > now that when the DX summit page is refreshed or while surfing the web it > happens. (it happened several times while writing this email) > > Two changes since that time, installed DDUtil and installed a new two > monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) > > Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU 2.00GB > RAM > > Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) > > Any suggestions besides changing computer? > > 73´s > > Mario/YS1MAE > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Flex 5K locking up
Hi Group: I know this question has been asked before but I could not find the answer so here it goes, My Flex 5K was running ok, some lockups once in a while but not as bad as now that when the DX summit page is refreshed or while surfing the web it happens. (it happened several times while writing this email) Two changes since that time, installed DDUtil and installed a new two monitor graphics card. (Radeon HD 4650 1GB GDDR2 Memory) Running Windows Vista 32 bit SP2 HP Pavillion Intel Core 2 Duo CPU 2.00GB RAM Flex setup 96KHZ buffer size 2048 Safe level 3 (latency (max) 15119us) Any suggestions besides changing computer? 73´s Mario/YS1MAE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
