Re: [Freevo-users] (no subject)
Hi, if I put ipv6 on the file /etc/modprobes I have an other error. result = self._callable() File /usr/lib/python2.7/dist-packages/kaa/base/callable.py, line 226, in __call__ return cb(*cb_args, **cb_kwargs) File /usr/lib/python2.7/dist-packages/kaa/base/sockets.py, line 527, in _connect self._resolve_hostname_with_action(addr, sock.connect, ipv6) File /usr/lib/python2.7/dist-packages/kaa/base/sockets.py, line 436, in _resolve_hostname_with_action func(addrinfo) File /usr/lib/python2.7/socket.py, line 224, in meth return getattr(self._sock,name)(*args) error: [Errno 111] Connection refused if you have idea thanks a+ On Thu, Feb 28, 2013 at 6:33 PM, elekis ele...@gmail.com wrote: Stupid question but is freevo work with python 2.7. after somes research, it's seems there is a problem with this version. and lrwxrwxrwx 1 root root 9 Feb 8 21:29 /usr/bin/python - python2.7 a+ On Thu, Feb 28, 2013 at 1:38 PM, elekis ele...@gmail.com wrote: Hi, sorry, I installed it by apt-get install freevo. (nothing more) it's a raspberry wheezy for the local_conf , I only activate the webservice. thanks a+ On Thu, Feb 28, 2013 at 8:44 AM, Liz ed...@billiau.net wrote: On Thu, 28 Feb 2013 06:23:42 +0100 elekis ele...@gmail.com wrote: Hi All, I try to install freevo on my raspberry pi and use it only with the web interface, but when I start it with freevo webserver start and I go to 192.168.1.150:8080 I have the following error. any idea ? thanks a+ You are not part of the group 'freevo', you cannot exploit shared resources (such as the cache). Your data will be saved in /home/elekis/.freevo Freevo 1.9.2-svn rupstream started at Thu Feb 28 05:15:53 2013 Unhandled Error Traceback (most recent call last): File /usr/lib/python2.7/dist-packages/twisted/protocols/basic.py, line 564, in dataReceived why = self.lineReceived(line) Elekis more information please distro on pi method of install of freevo (write a few lines) and your local_conf.py (zipped or tar.gz please) -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users -- http://twoji.deviantart.com/ http://www.flickr.com/elekis -- http://twoji.deviantart.com/ http://www.flickr.com/elekis -- http://twoji.deviantart.com/ http://www.flickr.com/elekis -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
Stupid question but is freevo work with python 2.7. after somes research, it's seems there is a problem with this version. and lrwxrwxrwx 1 root root 9 Feb 8 21:29 /usr/bin/python - python2.7 a+ On Thu, Feb 28, 2013 at 1:38 PM, elekis ele...@gmail.com wrote: Hi, sorry, I installed it by apt-get install freevo. (nothing more) it's a raspberry wheezy for the local_conf , I only activate the webservice. thanks a+ On Thu, Feb 28, 2013 at 8:44 AM, Liz ed...@billiau.net wrote: On Thu, 28 Feb 2013 06:23:42 +0100 elekis ele...@gmail.com wrote: Hi All, I try to install freevo on my raspberry pi and use it only with the web interface, but when I start it with freevo webserver start and I go to 192.168.1.150:8080 I have the following error. any idea ? thanks a+ You are not part of the group 'freevo', you cannot exploit shared resources (such as the cache). Your data will be saved in /home/elekis/.freevo Freevo 1.9.2-svn rupstream started at Thu Feb 28 05:15:53 2013 Unhandled Error Traceback (most recent call last): File /usr/lib/python2.7/dist-packages/twisted/protocols/basic.py, line 564, in dataReceived why = self.lineReceived(line) Elekis more information please distro on pi method of install of freevo (write a few lines) and your local_conf.py (zipped or tar.gz please) -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users -- http://twoji.deviantart.com/ http://www.flickr.com/elekis -- http://twoji.deviantart.com/ http://www.flickr.com/elekis -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Hi All, I try to install freevo on my raspberry pi and use it only with the web interface, but when I start it with freevo webserver start and I go to 192.168.1.150:8080 I have the following error. any idea ? thanks a+ You are not part of the group 'freevo', you cannot exploit shared resources (such as the cache). Your data will be saved in /home/elekis/.freevo Freevo 1.9.2-svn rupstream started at Thu Feb 28 05:15:53 2013 Unhandled Error Traceback (most recent call last): File /usr/lib/python2.7/dist-packages/twisted/protocols/basic.py, line 564, in dataReceived why = self.lineReceived(line) File /usr/lib/python2.7/dist-packages/twisted/web/http.py, line 1551, in lineReceived self.allContentReceived() File /usr/lib/python2.7/dist-packages/twisted/web/http.py, line 1618, in allContentReceived req.requestReceived(command, path, version) File /usr/lib/python2.7/dist-packages/twisted/web/http.py, line 773, in requestReceived self.process() --- exception caught here --- File /usr/lib/python2.7/dist-packages/twisted/web/server.py, line 131, in process resrc = self.site.getResourceFor(self) File /usr/lib/python2.7/dist-packages/twisted/web/server.py, line 562, in getResourceFor return resource.getChildForRequest(self.resource, request) File /usr/lib/python2.7/dist-packages/twisted/web/resource.py, line 65, in getChildForRequest resource = resource.getChildWithDefault(pathElement, request) File /usr/lib/python2.7/dist-packages/twisted/web/resource.py, line 169, in getChildWithDefault return self.getChild(path, request) File /usr/lib/python2.7/dist-packages/twisted/web/rewrite.py, line 24, in getChild return self.resource.getChildWithDefault(path, request) File /usr/lib/python2.7/dist-packages/twisted/web/resource.py, line 169, in getChildWithDefault return self.getChild(path, request) File /usr/lib/python2.7/dist-packages/twisted/web/static.py, line 314, in getChild return resource.IResource(processor(fpath.path, self.registry)) File /usr/lib/python2.7/dist-packages/twisted/web/script.py, line 64, in ResourceScript execfile(path, glob, glob) File /usr/share/freevo/htdocs/index.rpy, line 108, in module resource = IndexResource() File /usr/share/freevo/htdocs/index.rpy, line 45, in __init__ self.recordclient = RecordClientResource() File /usr/lib/python2.7/dist-packages/freevo/www/web_types.py, line 53, in RecordClientResource _singleton = RecordClientActions() File /usr/lib/python2.7/dist-packages/freevo/www/web_types.py, line 65, in __init__ kaa.inprogress(self.recordclient.channel).wait() File /usr/lib/python2.7/dist-packages/kaa/base/async.py, line 720, in wait return self.result File /usr/lib/python2.7/dist-packages/kaa/base/async.py, line 353, in result raise self._exception[1] kaa.base.async.AsyncException: Exception raised asynchronously; traceback follows: File /usr/lib/python2.7/dist-packages/kaa/base/thread.py, line 181, in __call__ result = self._callable() File /usr/lib/python2.7/dist-packages/kaa/base/callable.py, line 226, in __call__ return cb(*cb_args, **cb_kwargs) File /usr/lib/python2.7/dist-packages/kaa/base/sockets.py, line 519, in _connect sock, addr = self._make_socket(addr) File /usr/lib/python2.7/dist-packages/kaa/base/sockets.py, line 411, in _make_socket sock = socket.socket(socket.AF_INET6, socket.SOCK_STREAM) File /usr/lib/python2.7/socket.py, line 187, in __init__ _sock = _realsocket(family, type, proto) error: [Errno 97] Address family not supported by protocol -- http://twoji.deviantart.com/ http://www.flickr.com/elekis -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
On Thu, 28 Feb 2013 06:23:42 +0100 elekis ele...@gmail.com wrote: Hi All, I try to install freevo on my raspberry pi and use it only with the web interface, but when I start it with freevo webserver start and I go to 192.168.1.150:8080 I have the following error. any idea ? thanks a+ You are not part of the group 'freevo', you cannot exploit shared resources (such as the cache). Your data will be saved in /home/elekis/.freevo Freevo 1.9.2-svn rupstream started at Thu Feb 28 05:15:53 2013 Unhandled Error Traceback (most recent call last): File /usr/lib/python2.7/dist-packages/twisted/protocols/basic.py, line 564, in dataReceived why = self.lineReceived(line) Elekis more information please distro on pi method of install of freevo (write a few lines) and your local_conf.py (zipped or tar.gz please) -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
a href=http://kiltednerd.com/project/lib/ezpdf/fonts/02efpk.html; http://kiltednerd.com/project/lib/ezpdf/fonts/02efpk.html/a-- This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
http://interpublicitat.com/indexz28z.php -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Data protection magic? Nope - It's vRanger. Get your free trial download today. http://p.sf.net/sfu/quest-sfdev2dev ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
MIXER_VOLUME_MAX= seemed to do the trick! cheers From: Jonathan Archer jf_arc...@yahoo.com To: freevo-users@lists.sourceforge.net Sent: Tuesday, 23 December, 2008 21:56:49 Subject: Re: [Freevo-users] (no subject) Sorry about the slow response on this one, I've only just had chance to check MIXER_VOLUME_DEFAULT= seems to control master, not PCM. PCM is still way too loud and distorts everything. I've tried creating a mixer profile and loading on boot but freevo overrides this. this says to me that there is a setting in there somewhere which controls the PCM volume. Thanks for your help though, I'll try anything (almost) From: Jonathan Isom jei...@gmail.com To: freevo-users@lists.sourceforge.net Sent: Thursday, 20 November, 2008 15:57:51 Subject: Re: [Freevo-users] (no subject) On Thu, Nov 20, 2008 at 4:38 AM, Jonathan Archer jf_arc...@yahoo.com wrote: Hi guys, Does anyone know the config directive to set the PCM volume on start of freevo? For some reason even though i set volume levels on boot freevo always alters them when it starts, this is fine for master as my remote controls this however PCM seems to jump up to a level which ever so slightly distorts when playing music. Any ideas? I believe what you want is MIXER_VOLUME_DEFAULT= Later Jonathan Cheers Jon - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users -- ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
Sorry about the slow response on this one, I've only just had chance to check MIXER_VOLUME_DEFAULT= seems to control master, not PCM. PCM is still way too loud and distorts everything. I've tried creating a mixer profile and loading on boot but freevo overrides this. this says to me that there is a setting in there somewhere which controls the PCM volume. Thanks for your help though, I'll try anything (almost) From: Jonathan Isom jei...@gmail.com To: freevo-users@lists.sourceforge.net Sent: Thursday, 20 November, 2008 15:57:51 Subject: Re: [Freevo-users] (no subject) On Thu, Nov 20, 2008 at 4:38 AM, Jonathan Archer jf_arc...@yahoo.com wrote: Hi guys, Does anyone know the config directive to set the PCM volume on start of freevo? For some reason even though i set volume levels on boot freevo always alters them when it starts, this is fine for master as my remote controls this however PCM seems to jump up to a level which ever so slightly distorts when playing music. Any ideas? I believe what you want is MIXER_VOLUME_DEFAULT= Later Jonathan Cheers Jon - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users -- ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Hi guys, Does anyone know the config directive to set the PCM volume on start of freevo? For some reason even though i set volume levels on boot freevo always alters them when it starts, this is fine for master as my remote controls this however PCM seems to jump up to a level which ever so slightly distorts when playing music. Any ideas? Cheers Jon - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
On Thu, Nov 20, 2008 at 4:38 AM, Jonathan Archer [EMAIL PROTECTED] wrote: Hi guys, Does anyone know the config directive to set the PCM volume on start of freevo? For some reason even though i set volume levels on boot freevo always alters them when it starts, this is fine for master as my remote controls this however PCM seems to jump up to a level which ever so slightly distorts when playing music. Any ideas? I believe what you want is MIXER_VOLUME_DEFAULT= Later Jonathan Cheers Jon - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Hi, I have freevo 1.70 running on Ubuntu. I can not get a DVD to play with either mplayer, or xine thru freevo. Both apps work fine outside of freevo. The problem is, when the DVD is inserted it lists all the videoTS.vob files. I won't just play the dvd. Does anyone have any idea what I'm doing wrong? Thanks Dan M. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
Bart Coninckx wrote: Hi, in http://sourceforge.net/mailarchive/message.php?msg_id=10939564 it's already pointed out that it's near to impossible to keep freevo from grabbing the mouse, so if you use a double desktop like I do (on VGA and tv-out), you can't do anything else while running freevo. Very annoying ... I've done some experimenting with running a second X-server, but that forces me to witch in between X-servers with CTRL-ALT-F7 and F8, which is usesless as well Would a be a solution to have a second video-card running? Or do a still need to witch forth an back al the time? Or has someone a solution meanwhile for the mouse locking thing? Thx! Bart I haven't tested this myself but I came across a posting a while ago on the directfb mailing list that intimated XdirectFB might solve your problems. --- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628alloc_id=16845op=click ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
Stuart Wilkins wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 - -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I have managed to get freevo working very nicely now but I have a problem. I have just configured a G400 to use directfb with sdl and freevo v. 1.5.4 (on gentoo) While the output is excellent from mplayer the menu (OSD) has quite a lot of flicker. I have tried using both PAL and NTSC in directfbrc and they give the same problems. Does anyone have any experience with this and a method to improve the display??? Do i need to set a mode in fb.modes? Please could somebody help me? Many thanks to all, Best Wishes Stuart All I can say is that I see the same behaviour and I _really_ hope someone has the answer. John --- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628alloc_id=16845op=click ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 - -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I have managed to get freevo working very nicely now but I have a problem. I have just configured a G400 to use directfb with sdl and freevo v. 1.5.4 (on gentoo) While the output is excellent from mplayer the menu (OSD) has quite a lot of flicker. I have tried using both PAL and NTSC in directfbrc and they give the same problems. Does anyone have any experience with this and a method to improve the display??? Do i need to set a mode in fb.modes? Please could somebody help me? Many thanks to all, Best Wishes Stuart - -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (Darwin) iD8DBQFDe8ofXSo+ND8GiF4RAmNLAJ9QaLgRZ9+lBRttq/WPLFaOs9m8/ACdEFEF cuAFd9BsUg1Kjx5rOumWG6Y= =7ZL7 - -END PGP SIGNATURE- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (Darwin) iD8DBQFDe8onXSo+ND8GiF4RAnvNAKCDnbcWk/3v08M5LjApyLUNz+FRmgCgq94D 7ciRfW4Ezg8PxQF61vtc1oI= =0nrU -END PGP SIGNATURE- --- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628alloc_id=16845op=click ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
I could go and get it but I have a feeling the underlying problem is ubuntu has python-2.4. hi Ben, You are indeed correct. The binary version of freevo in the debian/ubuntu archives is indeed compiled against python version 2.3 and ubuntu installs with 2.4. It is however very easy to install from source. If memory serves there where only two dependencies i needed to satisfy (mmpython and mplayer). you can apt-get mplayer or use the GUI synaptic to install it. once this is done, the fun starts - you need to get the freevo sources... http://prdownloads.sourceforge.net/freevo/freevo-1.5.4.tar.gz?use_mirror=kent which you untar into a temporary location. tar -zxf freevo-1.5.4.tar.gz you then get the mmpython sources http://prdownloads.sourceforge.net/mmpython/mmpython-0.4.9.tar.gz?use_mirror=kent same thing tar -zxf mmpython-0.4.9.tar.gz The whole of freevo is written in python (which is a thing of great beauty) which means compilation is quite simple (compared to complicated make scripts). Python has it's own installer called distutils which is a typically cunning implementation. Whenever you need to compile something pythonic, go to the root directory of the sources and find the setup.py file. Now you run this command cd /root_to_mmpython python setup.py install this will compile the sources and confirm all dependencies and install the apps/library (usually somewhere under /usr/lib/python2.4/site-packages). Once this is successful do the same on the freevo sources and you should achieve happiness. No need to replace Breezy. HTH, let me know how it goes Brett IMPORTANT NOTICE: If you are not the intended recipient of this email (or such person's authorised representative), then : (a) please notify the sender of this email immediately by return email, facsimile or telephone and delete this message from your system; (b) you may not print, store, forward or copy this message or any part thereof or disclose or cause information in this message to be disclosed to any other person. The information in or attached to this email message is confidential and may be subject to legal privilege and client confidentiality. In addition this message is subject to important restrictions, qualifications and disclaimers (the disclaimer) that must be accessed and read by copying the following address into your Internet browser's address bar : http://www.investec.com/emaildisclaimer/ The disclaimer also provides our corporate information and names of our directors as required by law. The disclaimer is deemed to form part of this message in terms of Section 11 of the Electronic Communications and Transactions Act 25 of 2002. If you cannot access the disclaimer, please obtain a copy thereof from us by sending an email to : [EMAIL PROTECTED] Certain entities within the Investec group of companies are registered as authorised financial services providers. The details of these entities are available on our website : http://www.investec.com/southafrica --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Hi, in http://sourceforge.net/mailarchive/message.php?msg_id=10939564 it's already pointed out that it's near to impossible to keep freevo from grabbing the mouse, so if you use a double desktop like I do (on VGA and tv-out), you can't do anything else while running freevo. Very annoying ... I've done some experimenting with running a second X-server, but that forces me to witch in between X-servers with CTRL-ALT-F7 and F8, which is usesless as well Would a be a solution to have a second video-card running? Or do a still need to witch forth an back al the time? Or has someone a solution meanwhile for the mouse locking thing? Thx! Bart --- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
When I select Watch TV with my remote I get 'Event MENU_SELECT crashed.' This is in the log... any guesses? this comes from the gentoo 1.5.3 ebuild. File /usr/lib/python2.3/site-packages/freevo/main.py, line 315, in eventhandler app.eventhandler(event) File /usr/lib/python2.3/site-packages/freevo/menu.py, line 561, in eventhandler action( arg=arg, menuw=self ) File /usr/lib/python2.3/site-packages/freevo/menu.py, line 87, in select self.function(arg=self.arg, menuw=menuw) File /usr/lib/python2.3/site-packages/freevo/tv/tvmenu.py, line 120, in main_menu display_type='tv')) File /usr/lib/python2.3/site-packages/freevo/directory.py, line 116, in __init__ self.dir = os.path.abspath(directory) File /usr/lib/python2.3/posixpath.py, line 395, in abspath if not isabs(path): File /usr/lib/python2.3/posixpath.py, line 49, in isabs return s.startswith('/') AttributeError: 'list' object has no attribute 'startswith' --- SF email is sponsored by - The IT Product Guide Read honest candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click ___ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] (no subject)
In my previuos posting, there was a error (tired, olympic games, wife keeps bugging me), also on the wiki I had filled in. All been solved by now, and correctly functioning. Thnx FREQUENCY_TABLE but divided by 100. First test.. then if it does not work, try : ':freq=% (int(frequency/100))s' or maybe str() or maybe nothing.. This is my working code # modif gedeco # ':channel=%(channel)s' +# Filled in by Freevo ':freq=%(frequency)s/1000' + It should be divided by 1000, cause frequentietable has the ferquencies in Khz while mencoder needs Mhz By any chance would you care to chuck your experience up on the wiki? I've been meaning to for quite some time now? The wiki is very easy, it will only take 5 minutes to do I am sure.. Mick Of course: whenever I sorted out this problem, I would glad to add my contributions. Thankyou in advance! Mick I've update the WIKI with this content (Goes extremly slow??) So I copy/pasted my update for backup purposes = Use frequencies in mencoder instead of channels = The channel list is a convention on which frequencies are allowed to be broadcasted in some countries. Cable operators need more channels and have the possibilitie to use frequencies which are not allowed for Antenna transmission. (Frequencies, used by the military, is such a exemple). So first you need to add the non-standard frequencies to you're local_conf.py file. This is a illustrated example of my TV_CHANNELS settings {{{ TV_CHANNELS = [ ( 'bbcworld', 'BBC World', 'bbcworld' ), ( 'bbc1', 'BBC1', 'bbc1' ), ( 'bbc2', 'BBC2', 'bbc2' ), ... }}} The last parameter of every item in the list will be mapped to a frequency So this is a part of my FREQUENCY_TABLE The frequencies are in Khz {{{ FREQUENCY_TABLE = { 'bbcworld' : 294250, 'bbc1': 266250, 'bbc2': 273250, ... }}} Check with you're local cable tv supplier (website?) to find out. This would work correctly with Tvtime, but not with mencoder. As you see in this example, it will try to pass a channel parameter I have defined in freevo to mencoder {{{ 2004/07/28 22:40 CEST [*RecordServer*] popen /usr/bin/mencoder tv:// -tv driver=v4l2:input=0:norm=pal:channel=bbcworld... }}} A channel setting mencoder doesn't understand. Bassicly a tvtuner will tune in with a specific frequency and is not aware of channels. Channel descriptions are different, regarding the standard (pal,secam,ntsc) or the country you're living in. As I descibed above, Cable operators don't have to follow these conventions, cause they where designed with antenna broadcast in mind. I've modified the VCR_CMD to use a frequency instead of channels. The mencoder recording program supports the use of freq instead of channels. {{{ # ':freq=%(frequency)s' +# Filled in by Freevo ':freq=%(frequency)s/1000' + }}} The frequency in Khz defined in FREQUENCY_TABLE needs to be divided by 1000, since mencoder uses the frequency in Mhz --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] (no subject)
Anybody toughts on how to resolve this? The options you can pass to mplayer (or any record app by that matter) are in tv/plugins/manual_record.py. i think there is an option frequenzy passed, but you can check for all options there. The variable is cl_options from memory. Good luck, i expect this will work for you. By any chance would you care to chuck your experience up on the wiki? I've been meaning to for quite some time now? The wiki is very easy, it will only take 5 minutes to do I am sure.. Mick --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] (no subject)
Anybody toughts on how to resolve this? The options you can pass to mplayer (or any record app by that matter) are in tv/plugins/manual_record.py. i think there is an option frequenzy passed, but you can check for all options there. The variable is cl_options from memory. I guess you were refering to # generic_record.py - A plugin to record tv using VCR_CMD. Cause this is the only loaction where I found the frequency option # Add some new cl_options: frequency, base_filename, title, and sub-title. Good luck, i expect this will work for you. Not yet, but probably on the right track. So I modified my local_conf.py to look like this # modif gedeco # ':channel=%(channel)s' +# Filled in by Freevo ':freq=% (frequency)s' +# Filled in by Freevo The freq parameter should be recognized by mencoder (and not mplayer as I preciously stated wrong: they share the same man page) One tought: The frequency passed to mencoder should be the one defined in FREQUENCY_TABLE but divided by 100. My log files: (freevorecord-0.log) 2004/08/25 14:20 CEST [*RecordServer*] Traceback (most recent call last): File /usr/lib/python2.3/site-packages/twisted/python/log.py, line 52, in callWithContext return context.call({ILogContext: newCtx}, func, *args, **kw) File /usr/lib/python2.3/site-packages/twisted/python/context.py, line 43, in callWithContext return func(*args,**kw) File /usr/lib/python2.3/site-packages/twisted/internet/default.py, line 126, in run self.mainLoop() File /usr/lib/python2.3/site-packages/twisted/internet/default.py, line 134, in mainLoop self.runUntilCurrent() --- exception caught here --- File /usr/lib/python2.3/site-packages/twisted/internet/base.py, line 423, in runUntilCurrent call.func(*call.args, **call.kw) File /usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py, line 832, in minuteCheck self.checkToRecord() File /usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py, line 425, in checkToRecord self.record_app.Record(rec_prog) File /usr/lib/python2.3/site-packages/freevo/tv/plugins/generic_record.py, line 142, in Record self.rec_command = config.VCR_CMD % cl_options exceptions.ValueError: unsupported format character '(' (0x28) at index 108 So probably, this will be some obvious grammatical error for some python expert, but keep in mind for me it's like starting to read chinese :) By any chance would you care to chuck your experience up on the wiki? I've been meaning to for quite some time now? The wiki is very easy, it will only take 5 minutes to do I am sure.. Mick Of course: whenever I sorted out this problem, I would glad to add my contributions. Geert --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] (no subject)
I guess you were refering to # generic_record.py - A plugin to record tv using VCR_CMD. Yes. Cause this is the only loaction where I found the frequency option # Add some new cl_options: frequency, base_filename, title, and sub-title. Yes, but search the file for cl_options to find the place in the code they are defined.. Then for sure you will know the correct name.. # modif gedeco # ':channel=%(channel)s' +# Filled in by Freevo ':freq=% (frequency)s' +# Filled in by Freevo Remove the space? Also, you sng tabs or spaces? LAWAYS use spaces.. The freq parameter should be recognized by mencoder (and not mplayer as I preciously stated wrong: they share the same man page) One tought: The frequency passed to mencoder should be the one defined in FREQUENCY_TABLE but divided by 100. First test.. then if it does not work, try : ':freq=% (int(frequency/100))s' or maybe str() or maybe nothing.. So probably, this will be some obvious grammatical error for some python expert, but keep in mind for me it's like starting to read chinese :) Try above.. check the option exists in the code and is spelled correctly.. Then makesure your 'layout' is correct (emulate what exists.. spaces where they space.. no space where they do not.. By any chance would you care to chuck your experience up on the wiki? I've been meaning to for quite some time now? The wiki is very easy, it will only take 5 minutes to do I am sure.. Mick Of course: whenever I sorted out this problem, I would glad to add my contributions. Thankyou in advance! Mick --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] (no subject)
In my earlier test there was a typo in my local_conf.py ':freq=% (frequency)s' +# Filled in by Freevo It should be ':freq=%(frequency)s' +# Filled in by Freevo a space to much. This is my output now (grepped with ps aux while recording /usr/bin/mencoder tv:// -tv driver=v4l2:input=0:norm=pal:freq=294250:chanlist=europe-west:width Thnx for the help! I realy apreciate it. I will add my findings to the wiki. Geert Anybody toughts on how to resolve this? The options you can pass to mplayer (or any record app by that matter) are in tv/plugins/manual_record.py. i think there is an option frequenzy passed, but you can check for all options there. The variable is cl_options from memory. I guess you were refering to # generic_record.py - A plugin to record tv using VCR_CMD. Cause this is the only loaction where I found the frequency option # Add some new cl_options: frequency, base_filename, title, and sub-title. Good luck, i expect this will work for you. Not yet, but probably on the right track. So I modified my local_conf.py to look like this # modif gedeco # ':channel=%(channel)s' +# Filled in by Freevo ':freq=% (frequency)s' +# Filled in by Freevo The freq parameter should be recognized by mencoder (and not mplayer as I preciously stated wrong: they share the same man page) One tought: The frequency passed to mencoder should be the one defined in FREQUENCY_TABLE but divided by 100. My log files: (freevorecord-0.log) 2004/08/25 14:20 CEST [*RecordServer*] Traceback (most recent call last): File /usr/lib/python2.3/site-packages/twisted/python/log.py, line 52, in callWithContext return context.call({ILogContext: newCtx}, func, *args, **kw) File /usr/lib/python2.3/site-packages/twisted/python/context.py, line 43, in callWithContext return func(*args,**kw) File /usr/lib/python2.3/site-packages/twisted/internet/default.py, line 126, in run self.mainLoop() File /usr/lib/python2.3/site-packages/twisted/internet/default.py, line 134, in mainLoop self.runUntilCurrent() --- exception caught here --- File /usr/lib/python2.3/site-packages/twisted/internet/base.py, line 423, in runUntilCurrent call.func(*call.args, **call.kw) File /usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py, line 832, in minuteCheck self.checkToRecord() File /usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py, line 425, in checkToRecord self.record_app.Record(rec_prog) File /usr/lib/python2.3/site-packages/freevo/tv/plugins/generic_record.py, line 142, in Record self.rec_command = config.VCR_CMD % cl_options exceptions.ValueError: unsupported format character '(' (0x28) at index 108 So probably, this will be some obvious grammatical error for some python expert, but keep in mind for me it's like starting to read chinese :) By any chance would you care to chuck your experience up on the wiki? I've been meaning to for quite some time now? The wiki is very easy, it will only take 5 minutes to do I am sure.. Mick Of course: whenever I sorted out this problem, I would glad to add my contributions. Geert --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
RE: [Freevo-users] (no subject)
I guess you were refering to # generic_record.py - A plugin to record tv using VCR_CMD. Yes. Cause this is the only loaction where I found the frequency option # Add some new cl_options: frequency, base_filename, title, and sub-title. Yes, but search the file for cl_options to find the place in the code they are defined.. Then for sure you will know the correct name.. # modif gedeco # ':channel=%(channel)s' +# Filled in by Freevo ':freq=% (frequency)s' +# Filled in by Freevo Remove the space? Yes! just came to the same conclusion. Just have to verify my recording, cause I started it up from remote location. Just have to check out if everything would work well before adding anything to the Wiki thnx again. --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
] https://lists.sourceforge.net/lists/listinfo/freevo-users --__--__-- Message: 2 From: Peter Svensson [EMAIL PROTECTED] To: 'Mary Strimel ' [EMAIL PROTECTED], '[EMAIL PROTECTED] ' [EMAIL PROTECTED], 'freevo mailing list post ' [EMAIL PROTECTED] Subject: SV: [Freevo-users] still no sound on recording, almost ready to t hrow in towel ... Date: Fri, 30 Apr 2004 10:13:21 +0200 Reply-To: [EMAIL PROTECTED] Mary, maybe someone already mentioned this, or it might not be = applicable. However, I also had a problem with no sound from tv, and noticed after = a while that the sound channels where forced to zero. I then used this = script in the beginning of my /usr/bin/freevo script; -- aumix -m+70 xmodmap /root/.xmodmaprc xset s noblank -- The two last lines are only for loading my own keymappings in X and to = turn off screensaver. The first line sets the microphone line-in to 70% = since I have to get tv-out sound into the sound card. /PS -Ursprungligt meddelande- Fr=E5n: [EMAIL PROTECTED] Till: freevo mailing list post Skickat: 2004-04-30 00:00 =C4mne: [Freevo-users] still no sound on recording, almost ready to = throw in towel ... Hi again, sorry to be a bother, I'm feeling a bit stupid that I cant seem to get sound on my tv recording, after studying the wiki and trying to follow it very carefully: btaudio will just not work for me, the driver loads correctly but mencoder crashes when I try to use it. attempting the OSS / line in method, I plugged my patch cable in and=20 tried: aumix -1 80 -1 R -i 1; mencoder -tv on:driver=3Dv4l:input=3D0:norm=3DNTSC:channel=3D5:width=3D320:height=3D2 = 40:adevice=3D/ dev/dsp:audiorate=3D32000:forceaudio:forcechan=3D1:buffersize=3D128 = -oac mp3lame -lameopts br=3D128:cbr:mode=3D3 -ovc lavc --ffourcc divx -o /home/mary/movies/recorded/fox.avi tv:// on the above command mencoder will record a video, and report that a sound file has been created of X size, but the recording is silent! = mplayer plays tv properly with audio thru the patch cable. the one wrinkle in my setup is that I am trying to use the PCI sound card = rather than the onboard VIA controller ... but should that matter? xmms and mplayer use the PCI card just fine. maybe my aumix line needs a = tweak to point it to the correct sound card some how? I'm just at a loss, I don't want to give up on freevo yet but can't get used to watching recorded shows without sound :( thanks in advance, Mary --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Hi Mick, Thanks for your suggestions, my results are below, and I will send a plate of chocolate brownies to Mick or anyone who can tell me what I'm (still) doing wrong! :) adevice=/dev/dsp Is the the onboard or is this the other sound card? I think /dev/dsp should be the correct one (PCI card), because if I run aumix with no arguments, the pcm slider controls the volume of the PCI card. but maybe I'm wrong about this ... ls -l /dev/dsp* Gives me /dev/dsp, /dev/dsp1, /dev/dsp2, /dev/dsp3; [2 and 3 were created by btaudio when I loaded it in my failed efforts earlier, so shouldn't be relevant now that I'm doing the patch cable, right?]. The play around with aumix -D /dev/pickyours Aumix reports the exact same info whether I use aumix -d /dev/dsp -q or aumix -d /dev/dsp1 -q according to aumix, mic is set to record at 100, igain at 100 or whatever value I set. but, if I point mencoder to adevice=/dev/dsp1, mencoder halts with unable to open /dev/dsp1: invalid argument this audio format not recognized or supported error message. To find which sound card your meant to be refferencing.. Thats about it.. Make sure 'capture' us unmuted and volume is turned up.. How do I unmute capture? [P.S., when using mplayer through the sound card, turning mic all the way up in aumix allows me to hear sound thru patch cable, so I assume that means I should start my mencoder string with aumix -m 100 -m R -i 1 but it still gives no sound in the recorded file. I've experimented with different levels for igain and using line rather than mic but that gives no sound either.] I'm sure there is something simple going on, I'm just not getting it ... thanks in advance for any suggestions! Mary Mck On Fri, 2004-04-30 at 06:00, Mary Strimel wrote: Hi again, sorry to be a bother, I'm feeling a bit stupid that I cant seem to get sound on my tv recording, after studying the wiki and trying to follow it very carefully: btaudio will just not work for me, the driver loads correctly but mencoder crashes when I try to use it. attempting the OSS / line in method, I plugged my patch cable in and tried: aumix -1 80 -1 R -i 1; mencoder -tv on:driver=v4l:input=0:norm=NTSC:channel=5:width=320:height=240:adevice =/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=128 -oac mp3lame -lameopts br=128:cbr:mode=3 -ovc lavc --ffourcc divx -o /home/mary/movies/recorded/fox.avi tv:// on the above command mencoder will record a video, and report that a sound file has been created of X size, but the recording is silent! mplayer plays tv properly with audio thru the patch cable. the one wrinkle in my setup is that I am trying to use the PCI sound card rather than the onboard VIA controller ... but should that matter? xmms and mplayer use the PCI card just fine. maybe my aumix line needs a tweak to point it to the correct sound card some how? I'm just at a loss, I don't want to give up on freevo yet but can't get used to watching recorded shows without sound :( thanks in advance, Mary --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149alloc_id=8166op=click ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --__--__-- Message: 2 From: Peter Svensson [EMAIL PROTECTED] To: 'Mary Strimel ' [EMAIL PROTECTED], '[EMAIL PROTECTED] ' [EMAIL PROTECTED], 'freevo mailing list post ' [EMAIL PROTECTED] Subject: SV: [Freevo-users] still no sound on recording, almost ready to t hrow in towel ... Date: Fri, 30 Apr 2004 10:13:21 +0200 Reply-To: [EMAIL PROTECTED] Mary, maybe someone already mentioned this, or it might not be = applicable. However, I also had a problem with no sound from tv, and noticed after = a while that the sound channels where forced to zero. I then used this = script in the beginning of my /usr/bin/freevo script; -- aumix -m+70 xmodmap /root/.xmodmaprc xset s noblank -- The two last lines are only for loading my own keymappings in X and to = turn off screensaver. The first line sets the microphone line-in to 70% = since I have to get tv-out sound into the sound card. /PS -Ursprungligt meddelande- Fr=E5n: [EMAIL PROTECTED] Till: freevo mailing list post Skickat: 2004-04-30 00:00 =C4mne: [Freevo-users] still no sound on recording, almost ready to = throw in towel ... Hi again, sorry to be a bother, I'm feeling a bit stupid that I cant seem to get sound on my tv recording, after studying the wiki and trying to follow it very carefully: btaudio will just not work for me, the driver loads correctly but mencoder crashes when I try to use it. attempting the OSS / line in method, I plugged my patch
[Freevo-users] (no subject)
I recently reformatted my file server and loadedit with Linux. It was previously running windows 2000. Now I am trying to decide what network file sharing protocol to use. What is the best network file sharing protocol for linux-linux transactions which consist of approx. 1 gig size movies and mp3s? Thanks, Matthew _ Help protect your PC. Get a FREE computer virus scan online from McAfee. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
Nor for the list but ... NFS would be my first choice and after, samba but it's more complicated, i think, to use. BTW, one mp3 of 1Go ... ;) Matt Goeden a écrit : I recently reformatted my file server and loadedit with Linux. It was previously running windows 2000. Now I am trying to decide what network file sharing protocol to use. What is the best network file sharing protocol for linux-linux transactions which consist of approx. 1 gig size movies and mp3s? Thanks, Matthew -- Feulvarc'h Mathieu +(33)01 34 81 61 22 Administrateur *nix et support helpdesk (*nix/Windows) THALES --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
--- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa0016ave/direct;at.asp_061203_01/01 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Ok the -encode fixed the gtk problem Thanks a lot freevo-runtime compilains about freetype-config missing the first time I run it. then after that freevo-runtime compilains about undefined SDL referances. Hi, I nearly have the same problems. As I also have USE=dxr3 it wants to have libfame, but it failes solving the dependency. I installed freevo about 3 a while ago on my gentoo system. and it seemed to work fine. I reinstalled my system and now I get a lot of problems. when I run emerge freevo: freevo-runtime stops because it wants freetype-config smpeg has sdl linking issues. libdv whats gkt-config even though I disabled the GTK use flag. This is well known, set USE=-encode. I use woundering if someone out there could give me some pointer to getting freevo installed. last time I used freevo, I though it was an excelant product. and I can't wait to get it back up and running. Thanks Joe. Marius __ Do you Yahoo!? Yahoo! Calendar - Free online calendar with sync to Outlook(TM). http://calendar.yahoo.com --- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] (no subject)
Hi, played a bit around yesterday and could successfully compile everything when using libsdl-1.2.4, though on my main machine it even works with libsdl-1.2.5. Marius On Tuesday 03 June 2003 05:20, nobody wrote: Ok the -encode fixed the gtk problem Thanks a lot freevo-runtime compilains about freetype-config missing the first time I run it. then after that freevo-runtime compilains about undefined SDL referances. Hi, I nearly have the same problems. As I also have USE=dxr3 it wants to have libfame, but it failes solving the dependency. I installed freevo about 3 a while ago on my gentoo system. and it seemed to work fine. I reinstalled my system and now I get a lot of problems. when I run emerge freevo: freevo-runtime stops because it wants freetype-config smpeg has sdl linking issues. libdv whats gkt-config even though I disabled the GTK use flag. This is well known, set USE=-encode. I use woundering if someone out there could give me some pointer to getting freevo installed. last time I used freevo, I though it was an excelant product. and I can't wait to get it back up and running. Thanks Joe. Marius __ Do you Yahoo!? Yahoo! Calendar - Free online calendar with sync to Outlook(TM). http://calendar.yahoo.com --- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
could you give me some pointers. I am having a really hard time. I tryed using the gatos driver with little luck I could get the tv to display but not record ( with avview). Thank you vary much. it is greatly appesheated. What I'm really looking for is something that will record programed show. then compress it when it is not doing anything else. so I can watch then latter. From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: RE: [Freevo-users] ATI AIW Rage 128 Date: Mon, 10 Mar 2003 20:10:51 -0500 Reply-To: [EMAIL PROTECTED] I've almost got it working The AIW128 works (displays TV) under avView, I have the EPG working, but when I select a channel mplayer shuts down with a 'no data' error - so I suspect that however freevo uses the AIW128 to stream to mplayer isn't working correctly. So I'm close ! David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of nobody Sent: Monday, March 10, 2003 2:25 PM To: [EMAIL PROTECTED] Subject: [Freevo-users] ATI AIW Rage 128 does anyone have freevo working with an ati all in wounder rage 128 AGP. if so could you please tell me how to set it up. or if it is not possible. Thank. __ Do you Yahoo!? Yahoo! Web Hosting - establish your business online http://webhosting.yahoo.com --- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
[Freevo-users] (no subject)
Has anyone used the 3dfx voodoo 3500 (the one with the Video and RF in, and VGA out of the board; and a dongle with RCA/SVideo in and out) on a freevo system? if so does it work well? I think i'm going to invest in one seeing as it is a cheaper version of the ATI All-in-Wonder cards, and the dongle will make for better connectivity. Narf __ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ --- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users