[hugin-ptx] Re: Why WIGINWIS (What I Get Is Not What I See)?
Sorry. Windows 7, Hugin Pre-Release 2011.5.0.ab9192a60c64 built by Matthew Petroff. I repeated the process several times with 2 different projects and the result is similar. I'll put together the necessary files and report back. In addition to Align and Stitch, I've done some masking but the misplaced pictures are not always associated with maskings. Be back with project files. On Sunday, July 8, 2012 11:41:04 PM UTC-7, Bart van Andel wrote: What version of Hugin? On what machine? We need a bit more detail to check what went wrong. Could you repeat the process and if it fails again, tell us *exactly* how you got there? Because this is a very unlikely result if you *only* pressed the Stitch button on the stitching tab after checking the alignment in the fast preview. Please provide a zip with your project file and (scaled down) images as well if possible. -- Bart On Monday, July 9, 2012 8:01:51 AM UTC+2, ecs1749 wrote: I've done several 360-180 pictures where the picture looks great in fast pre-view mode but looks horrible after I stitch them together. What is causing that? See photos attached. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Blending question
Is there a way to handle this blending issue: The left end of my 360 panorama picture created has an obvious different exposure level than the right hand side even though they are the same picture. The optimization process assigns a different EV to the two ends. As a result, as I rotate the .mov file, I ended up with an ugly transition as it goes through one side and rotate back from the other. How should I handle this? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Blending question
Thanks, Jan. It does look better, much better. On Sunday, June 3, 2012 1:28:39 AM UTC-7, Jan Martin wrote: Kim, you are using multiblend, and wrapping is a known challenge. Search the mailing list for multiblend for details on how to fix this by running multiblend twice: http://groups.google.com/group/hugin-ptx Or you can try to reduce blending levels by 1 or more: -l -1 to make the error go away. Jan On Sun, Jun 3, 2012 at 10:17 AM, ecs1749 ecs1...@gmail.com wrote: Is there a way to handle this blending issue: The left end of my 360 panorama picture created has an obvious different exposure level than the right hand side even though they are the same picture. The optimization process assigns a different EV to the two ends. As a result, as I rotate the .mov file, I ended up with an ugly transition as it goes through one side and rotate back from the other. How should I handle this? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] white image was not identified as redundant
Thanks. On Wednesday, May 30, 2012 11:10:17 PM UTC-7, Groogle wrote: On Wednesday, 30 May 2012 at 22:51:53 -0700, ecs1749 wrote: I am getting this message during stitching: enblend: warning: failed to detect any seam enblend: mask is entirely black, but white image was not identified as redundant and the process stopped. What does that message mean? This is described at http://wiki.panotools.org/Hugin_FAQ#Enblend_error:_Mask_is_entirely_black.2C_but_white_image_was_not_identified_as_redundant According to that page, it should be fixed in enblend version 4.0, which has been the current version for some time. I have some recollection that it's still possible to have this problem with 4.0, but it's much less likely. Greg -- Sent from my desktop computer Finger g...@freebsd.org for PGP public key. See complete headers for address and phone numbers. This message is digitally signed. If your Microsoft MUA reports problems, please read http://tinyurl.com/broken-mua -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] enblend: info: loading next image: name.tif 1/1 make: *** [name.jpg] Error 255
Thanks, that should save some time. I shuffled the order of the tif files and was able to go further but enblend still crash w the 255 error. What about that .mk file? Is hugin using a standard make? On Friday, June 1, 2012 4:20:06 AM UTC-7, Cartola wrote: Hi, I usually stitch remapped images and run enblend by hand, to avoid things like that and have to start all over. It is just an idea. I usually run by hand with parameters like: -w (to wrap horizontally as I make fullsphere panoramas) -m 6000 (to increase memory usage as I have 8G RAM in this machine) --compression=95 (to set JPG quality when I want a jpg output file) So: enblend -w -m 6000 --compression=95 -o output.jpg input0001.tif input0002.tif ... I usually refer to all input files with a wildcard like input*.tif Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/5/31 ecs1749 ecs1...@gmail.com Anybody know why enblend crashes with the Subject message during the stitch process? The message appeared after Hugin invoked enblend 9 times for the first 9 tif files, and then crashed on the 10th, after displaying the above message. Running latest version of Hugin, Windows 7. Is there a way to restart only the enblend portion only? I don't want to have to go through the entire process as I try different parameters for enblend... Thanks, -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: enblend: info: loading next image: name.tif 1/1 make: *** [name.jpg] Error 255
Okay. It's obvious the crash is not caused by the number of tif files enblend loaded but by certain tif files. This is very discouraging. Been trying for days to get one picture done but ran into one roadblock after another. Anybody has any ideas on how to get around this 255 error? Is there an alternative program I can try? On Thursday, May 31, 2012 2:55:37 PM UTC-7, ecs1749 wrote: Anybody know why enblend crashes with the Subject message during the stitch process? The message appeared after Hugin invoked enblend 9 times for the first 9 tif files, and then crashed on the 10th, after displaying the above message. Running latest version of Hugin, Windows 7. Is there a way to restart only the enblend portion only? I don't want to have to go through the entire process as I try different parameters for enblend... Thanks, -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Re: enblend: info: loading next image: name.tif 1/1 make: *** [name.jpg] Error 255
WORKS!!! Very fast and processed all 147 tif files without even a slightest sigh or cough! On Friday, June 1, 2012 11:47:09 AM UTC-7, Cartola wrote: You can try multiblend: List history about ithttps://groups.google.com/group/hugin-ptx/search?group=hugin-ptxq=multiblendqt_g=Search+this+group The tool site http://horman.net/multiblend/ Good luck! Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/6/1 ecs1749 ecs1...@gmail.com Okay. It's obvious the crash is not caused by the number of tif files enblend loaded but by certain tif files. This is very discouraging. Been trying for days to get one picture done but ran into one roadblock after another. Anybody has any ideas on how to get around this 255 error? Is there an alternative program I can try? On Thursday, May 31, 2012 2:55:37 PM UTC-7, ecs1749 wrote: Anybody know why enblend crashes with the Subject message during the stitch process? The message appeared after Hugin invoked enblend 9 times for the first 9 tif files, and then crashed on the 10th, after displaying the above message. Running latest version of Hugin, Windows 7. Is there a way to restart only the enblend portion only? I don't want to have to go through the entire process as I try different parameters for enblend... Thanks, -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] enblend: info: loading next image: name.tif 1/1 make: *** [name.jpg] Error 255
Anybody know why enblend crashes with the Subject message during the stitch process? The message appeared after Hugin invoked enblend 9 times for the first 9 tif files, and then crashed on the 10th, after displaying the above message. Running latest version of Hugin, Windows 7. Is there a way to restart only the enblend portion only? I don't want to have to go through the entire process as I try different parameters for enblend... Thanks, -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Identifying image button
I just discovered that I can do a ctrl-drag mouse over the preview-globe and Hugin would high light the corresponding image button (and in different colors). This is a very useful feature. Unfortunately, it works great if all of the buttons fit on the screen. Let say you have 60 pictures and the 1st and the 60th overlaps. When I do a ctrl-drag over the overlapped area, I can only see one of the 2 image buttons. It gets very frustrating because if I scroll the buttons horizontally, the highlight goes away. I am working on a project consists of 144 photos and you can imagine how hard it is to have to jump back and forth in order to use this function. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
I set the number of CPU down to 1, still fails after 6 photos (4948 bit wide each). If I reduce the resolution of each photo to 1600 (268kb file size each), I can load 140+ pictures no sweat. At a resolution of 3200 bits wide and I was able to load close to 100 photos before it fails. If anybody wants to try, the pictures are located at: https://picasaweb.google.com/116295145477369704246/HuginTest?authkey=Gv1sRgCPeHl_-Wmci06QE On Tuesday, May 29, 2012 11:16:27 PM UTC-7, Steeve wrote: An error happened while loading image : caught exception: bad allocation Hasn't this problem already been discussed on this newsgroups? In summary on computers with multiple cores/processors images are being loaded in parallel which consumes too much memory.. The error is not coming from the memory which is currently being used, but from the additional memory it wants to allocate.. You can find a better explanation by search the newsgroup for bad allocation The workaround was to reduce the number of CPUs Hugin uses.. In Hugin look at file-preferences- number of CPUs. On my machine this was set to 4 I had to reduce it to 1. With 4 I'd typically get this error after 10 images (I've got a smaller camera sensor) With 2 I'd still occassionally got this error So I end up having to reduce this to 1. Regards Steve On May 30, 5:01 am, ecs1749 ecs1...@gmail.com wrote: For my case, this is the newly available 64 bit version of Hugin (w new GUI), running under Windows 7, 8G of real memory, plenty of disk space for temp, and the max amount of memory used by Hugin appears to be less than 1.5G. The failure occurs with ramdon set of photos at widths of 4948 bits each. Most cases I tried, the failure occurs after a handful of pictures - around 4 to 5. The error message simply says An error happened while loading image : caught exception: bad allocation. If I scale the pictures down to 1087 bits, there is no issue. I can process over a hundred files no problem. What else info can I provide to help? On Tuesday, May 29, 2012 2:53:12 PM UTC-7, Bart van Andel wrote: It would help if you provide a *detailed* description of when things go wrong instead of just saying Hugin crashes. Which version, which OS, 32 or 64 bit, amount of RAM, *specific error message*, all of those may matter. Moreover, giving incorrect information (which you did, I guess not purposefully but nonetheless) can steer your fellow group members in the wrong direction. Being precise can save everyone some time - and a little frustration. Please keep that in mind. Also, I asked which program crashed a couple replies back. Please do read answers carefully when people are offering you a hand. We are all volunteers here. Could you try to see which image the cp generators are crashing on exactly? If you find it, you may want to post it somewhere so we can have a look at it. Maybe one of your images is broken which may cause all kinds of unexpected behavior. -- Bart On Tuesday, May 29, 2012 6:02:36 PM UTC+2, ecs1749 wrote: Yes, I have done both and still fails. Incidentally, the failure is not when loading the images. It's when detecting control points. I've tried changing detectors and they all fail the same fashion (some sooner than others). On Tuesday, May 29, 2012 12:09:06 AM UTC-7, Stefan wrote: On 27.05.2012 20:28, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. Have you tried to increase the image cache memory setting in the Hugin Preferences dialog? Are you sure you have enough free disk space in your TEMP directory? With kind regards Stefan Peter -- In theory there is no difference between theory and practice. In practice there is. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
I am able to go a lot further with this setting. I am pushing to see how many photos I can process - right now it's processing 32 no problem. On Sunday, May 27, 2012 11:28:09 AM UTC-7, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
I have the raw file but when Picasa sync with web site, it automatically converts them to jpg and strips the EXIF. I'll see if there's a way to include the EXIF. On Wednesday, May 30, 2012 8:00:04 AM UTC-7, Jan Martin wrote: Is it just me, or is there really no way to get the original images with EXIF intact? Also I do not want to download 100 images one by one. Jan On Wed, May 30, 2012 at 4:48 PM, ecs1749 ecs1...@gmail.com wrote: I set the number of CPU down to 1, still fails after 6 photos (4948 bit wide each). If I reduce the resolution of each photo to 1600 (268kb file size each), I can load 140+ pictures no sweat. At a resolution of 3200 bits wide and I was able to load close to 100 photos before it fails. If anybody wants to try, the pictures are located at: https://picasaweb.google.com/116295145477369704246/HuginTest?authkey=Gv1sRgCPeHl_-Wmci06QE On Tuesday, May 29, 2012 11:16:27 PM UTC-7, Steeve wrote: An error happened while loading image : caught exception: bad allocation Hasn't this problem already been discussed on this newsgroups? In summary on computers with multiple cores/processors images are being loaded in parallel which consumes too much memory.. The error is not coming from the memory which is currently being used, but from the additional memory it wants to allocate.. You can find a better explanation by search the newsgroup for bad allocation The workaround was to reduce the number of CPUs Hugin uses.. In Hugin look at file-preferences- number of CPUs. On my machine this was set to 4 I had to reduce it to 1. With 4 I'd typically get this error after 10 images (I've got a smaller camera sensor) With 2 I'd still occassionally got this error So I end up having to reduce this to 1. Regards Steve On May 30, 5:01 am, ecs1749 ecs1...@gmail.com wrote: For my case, this is the newly available 64 bit version of Hugin (w new GUI), running under Windows 7, 8G of real memory, plenty of disk space for temp, and the max amount of memory used by Hugin appears to be less than 1.5G. The failure occurs with ramdon set of photos at widths of 4948 bits each. Most cases I tried, the failure occurs after a handful of pictures - around 4 to 5. The error message simply says An error happened while loading image : caught exception: bad allocation. If I scale the pictures down to 1087 bits, there is no issue. I can process over a hundred files no problem. What else info can I provide to help? On Tuesday, May 29, 2012 2:53:12 PM UTC-7, Bart van Andel wrote: It would help if you provide a *detailed* description of when things go wrong instead of just saying Hugin crashes. Which version, which OS, 32 or 64 bit, amount of RAM, *specific error message*, all of those may matter. Moreover, giving incorrect information (which you did, I guess not purposefully but nonetheless) can steer your fellow group members in the wrong direction. Being precise can save everyone some time - and a little frustration. Please keep that in mind. Also, I asked which program crashed a couple replies back. Please do read answers carefully when people are offering you a hand. We are all volunteers here. Could you try to see which image the cp generators are crashing on exactly? If you find it, you may want to post it somewhere so we can have a look at it. Maybe one of your images is broken which may cause all kinds of unexpected behavior. -- Bart On Tuesday, May 29, 2012 6:02:36 PM UTC+2, ecs1749 wrote: Yes, I have done both and still fails. Incidentally, the failure is not when loading the images. It's when detecting control points. I've tried changing detectors and they all fail the same fashion (some sooner than others). On Tuesday, May 29, 2012 12:09:06 AM UTC-7, Stefan wrote: On 27.05.2012 20:28, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. Have you tried to increase the image cache memory setting in the Hugin Preferences dialog? Are you sure you have enough free disk space in your TEMP directory? With kind regards Stefan Peter -- In theory there is no difference between theory and practice. In practice there is. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx
[hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
Yes, this procedure solves the problem. I loaded 128 photos with this setting and it went through. On Wednesday, May 30, 2012 7:58:55 AM UTC-7, ecs1749 wrote: I am able to go a lot further with this setting. I am pushing to see how many photos I can process - right now it's processing 32 no problem. On Sunday, May 27, 2012 11:28:09 AM UTC-7, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
I followed the steps you posted and was able to process 100 or so photos. Here's a repost of your procedure: If your problem is with the CP detecors, there seems to be a solution at least for CPFind. Can you please give this a try: o Open the Preferences dialog of Hugin o Select the Control Point Detectors tab o Press the Load defaults button in the lower left corner. o Select the entry named Hugins CPFind (Default) from the list of CP detectors available. o Press the Edit ... button on the right. You will be presented with the Parameters for Control Point Detectors dialog. o Add --ncores 1 to the Arguments entry. It should read now --ncores 1 --multirow -o %o %s o Leave this screen by pressing OK o Use the Apply button to apply your changes. o Redo your panorama o Let us know how it went. On Wednesday, May 30, 2012 12:18:02 PM UTC-7, Stefan wrote: Dear ecs1749 On 30.05.2012 16:58, ecs1749 wrote: I am able to go a lot further with this setting. I am pushing to see how many photos I can process - right now it's processing 32 no problem. What setting are you talking about? Please bear in mind that all these emails will be preserved for eternity and a gazillion Hugin users may search for a solution to the the exact same problem you had. Wouldn't it be nice for them to get a solution? Something in the way of I did this and this, and now it works? Not to mention the fact that in order to solve these problems in Hugin, the developers and contributors to the project are eager to know what to do to fix the problems found by their users. So, please, what did you do _exactly_ in order to be able to create your pano? WKR Stefan Peter -- In summary, I think you are trying to solve a problem that may not need to be solved, using a tool that is not meant to solve it, without understanding what is causing your problems and without knowing how the tool actually works in the first place :) Jeffrey J. Kosowsky on the backuppc mailing list -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
Hugin;s CPFind + Celeste Autopano-SIFT-C Autopano Panomatic Align Image stack CPFind (multirow/stacked) Autopano-SIFT-C (multirow/stack) Vertical lines I tried them all. Some I get a .exe file not found. Others fail the same way. I will provide more information once I finish with the pano I've been working on. On Wednesday, May 30, 2012 1:57:24 PM UTC-7, Stefan wrote: Dear ecs1749 On 30.05.2012 21:59, ecs1749 wrote: I followed the steps you posted and was able to process 100 or so photos. Here's a repost of your procedure: Thank you very much for confirming that this has helped wit CPFind. If I recall correctly, this issue has been fixed already in the current development version, so it should not resurface in any Hugin version 2011.04. However, the situation for CP detectors other than CPFind has to be reevaluated because you mentioned that these have failed you. too. Can you, by any chance, remember what other CPDs you tried without success? With kind regards Stefan Peter If your problem is with the CP detecors, there seems to be a solution at least for CPFind. Can you please give this a try: o Open the Preferences dialog of Hugin o Select the Control Point Detectors tab o Press the Load defaults button in the lower left corner. o Select the entry named Hugins CPFind (Default) from the list of CP detectors available. o Press the Edit ... button on the right. You will be presented with the Parameters for Control Point Detectors dialog. o Add --ncores 1 to the Arguments entry. It should read now --ncores 1 --multirow -o %o %s o Leave this screen by pressing OK o Use the Apply button to apply your changes. o Redo your panorama o Let us know how it went. On Wednesday, May 30, 2012 12:18:02 PM UTC-7, Stefan wrote: Dear ecs1749 On 30.05.2012 16:58, ecs1749 wrote: I am able to go a lot further with this setting. I am pushing to see how many photos I can process - right now it's processing 32 no problem. What setting are you talking about? Please bear in mind that all these emails will be preserved for eternity and a gazillion Hugin users may search for a solution to the the exact same problem you had. Wouldn't it be nice for them to get a solution? Something in the way of I did this and this, and now it works? Not to mention the fact that in order to solve these problems in Hugin, the developers and contributors to the project are eager to know what to do to fix the problems found by their users. So, please, what did you do _exactly_ in order to be able to create your pano? WKR Stefan Peter -- In summary, I think you are trying to solve a problem that may not need to be solved, using a tool that is not meant to solve it, without understanding what is causing your problems and without knowing how the tool actually works in the first place :) Jeffrey J. Kosowsky on the backuppc mailing list -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- In summary, I think you are trying to solve a problem that may not need to be solved, using a tool that is not meant to solve it, without understanding what is causing your problems and without knowing how the tool actually works in the first place :) Jeffrey J. Kosowsky on the backuppc mailing list -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] white image was not identified as redundant
I am getting this message during stitching: enblend: warning: failed to detect any seam enblend: mask is entirely black, but white image was not identified as redundant and the process stopped. What does that message mean? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Memory allocation issue still not resolved w 64 bit version
Yes, I have done both and still fails. Incidentally, the failure is not when loading the images. It's when detecting control points. I've tried changing detectors and they all fail the same fashion (some sooner than others). On Tuesday, May 29, 2012 12:09:06 AM UTC-7, Stefan wrote: On 27.05.2012 20:28, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. Have you tried to increase the image cache memory setting in the Hugin Preferences dialog? Are you sure you have enough free disk space in your TEMP directory? With kind regards Stefan Peter -- In theory there is no difference between theory and practice. In practice there is. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Feature request: Bring image to top when Move/Drag
I still don't know what good is the move/drag feature. It doesn't affect the control points at all. So, what do you use it for? On Tuesday, May 29, 2012 8:31:21 AM UTC-7, Jan Martin wrote: Hi all, when moving an image in the Fast Panorama preview it is often hidden by the other images. I wonder if someone is willing to implement this: Have an automatic to bring the image grabbed with the mouse forward so one can place it more easily? Same when clicking an images number, so one can then grab it easily with the mouse. What do you think? P.S.: Also I still have not found a way to do Move up / Move down in the Photos tab with the new GUI? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Re: Feature request: Bring image to top when Move/Drag
I did read that section. It tells me what it does - not what it's for. Using this tool you can recentre the panorama interactively . So, do I do this to make it easier to view the globe, or does it actually affect the way the output image is created? On Tuesday, May 29, 2012 9:57:27 AM UTC-7, Jan Martin wrote: http://wiki.panotools.org/Hugin_Fast_Preview_window#Move.2FDrag_tab On Tue, May 29, 2012 at 6:06 PM, ecs1749 ecs1...@gmail.com wrote: I still don't know what good is the move/drag feature. It doesn't affect the control points at all. So, what do you use it for? On Tuesday, May 29, 2012 8:31:21 AM UTC-7, Jan Martin wrote: Hi all, when moving an image in the Fast Panorama preview it is often hidden by the other images. I wonder if someone is willing to implement this: Have an automatic to bring the image grabbed with the mouse forward so one can place it more easily? Same when clicking an images number, so one can then grab it easily with the mouse. What do you think? P.S.: Also I still have not found a way to do Move up / Move down in the Photos tab with the new GUI? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Re: Feature request: Bring image to top when Move/Drag
Thanks. Now that's clear. On Tuesday, May 29, 2012 10:46:57 AM UTC-7, Jan Martin wrote: The image alway shows what the output image will look like. (For speed reasons it is not perfect.) So if you move it (or parts of it) it does affect the output image. You can move the globe with the mouse. You need to grab beside the globe, not the globe itself. Moving the globe does not affect the output image. We really need some screen video for hugin. Jan On Tue, May 29, 2012 at 7:37 PM, ecs1749 ecs1...@gmail.com wrote: I did read that section. It tells me what it does - not what it's for. Using this tool you can recentre the panorama interactively . So, do I do this to make it easier to view the globe, or does it actually affect the way the output image is created? On Tuesday, May 29, 2012 9:57:27 AM UTC-7, Jan Martin wrote: http://wiki.panotools.org/Hugin_Fast_Preview_window#Move.2FDrag_tab On Tue, May 29, 2012 at 6:06 PM, ecs1749 ecs1...@gmail.com wrote: I still don't know what good is the move/drag feature. It doesn't affect the control points at all. So, what do you use it for? On Tuesday, May 29, 2012 8:31:21 AM UTC-7, Jan Martin wrote: Hi all, when moving an image in the Fast Panorama preview it is often hidden by the other images. I wonder if someone is willing to implement this: Have an automatic to bring the image grabbed with the mouse forward so one can place it more easily? Same when clicking an images number, so one can then grab it easily with the mouse. What do you think? P.S.: Also I still have not found a way to do Move up / Move down in the Photos tab with the new GUI? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Memory allocation issue still not resolved w 64 bit version
At the time of my first post, I didn't realize that the default setting was set to create control points at loading time. That's why I thought the error occurs at loading time. Upon further investigation, the error occurs at control points detection time. So I reported it with a clarification. See Riz Thon's message below. I am getting the exact same messages reported by Riz. On Tuesday, May 29, 2012 2:13:53 PM UTC-7, Stefan wrote: On 29.05.2012 18:02, ecs1749 wrote: Yes, I have done both and still fails. Incidentally, the failure is not when loading the images. It's when detecting control points. I've tried changing detectors and they all fail the same fashion (some sooner than others). You are aware of the fact that you have claimed that the problem arises upon the loading of the images in your opening mail, don't you? Do you have an error message or, even better, a log file, in order to prove your statement this time? With kind regards Stefan Peter -- In summary, I think you are trying to solve a problem that may not need to be solved, using a tool that is not meant to solve it, without understanding what is causing your problems and without knowing how the tool actually works in the first place :) Jeffrey J. Kosowsky on the backuppc mailing list -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Memory allocation issue still not resolved w 64 bit version
For my case, this is the newly available 64 bit version of Hugin (w new GUI), running under Windows 7, 8G of real memory, plenty of disk space for temp, and the max amount of memory used by Hugin appears to be less than 1.5G. The failure occurs with ramdon set of photos at widths of 4948 bits each. Most cases I tried, the failure occurs after a handful of pictures - around 4 to 5. The error message simply says An error happened while loading image : caught exception: bad allocation. If I scale the pictures down to 1087 bits, there is no issue. I can process over a hundred files no problem. What else info can I provide to help? On Tuesday, May 29, 2012 2:53:12 PM UTC-7, Bart van Andel wrote: It would help if you provide a *detailed* description of when things go wrong instead of just saying Hugin crashes. Which version, which OS, 32 or 64 bit, amount of RAM, *specific error message*, all of those may matter. Moreover, giving incorrect information (which you did, I guess not purposefully but nonetheless) can steer your fellow group members in the wrong direction. Being precise can save everyone some time - and a little frustration. Please keep that in mind. Also, I asked which program crashed a couple replies back. Please do read answers carefully when people are offering you a hand. We are all volunteers here. Could you try to see which image the cp generators are crashing on exactly? If you find it, you may want to post it somewhere so we can have a look at it. Maybe one of your images is broken which may cause all kinds of unexpected behavior. -- Bart On Tuesday, May 29, 2012 6:02:36 PM UTC+2, ecs1749 wrote: Yes, I have done both and still fails. Incidentally, the failure is not when loading the images. It's when detecting control points. I've tried changing detectors and they all fail the same fashion (some sooner than others). On Tuesday, May 29, 2012 12:09:06 AM UTC-7, Stefan wrote: On 27.05.2012 20:28, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. Have you tried to increase the image cache memory setting in the Hugin Preferences dialog? Are you sure you have enough free disk space in your TEMP directory? With kind regards Stefan Peter -- In theory there is no difference between theory and practice. In practice there is. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Memory allocation issue still not resolved w 64 bit version
As I indicated, I tried everyone of the detectors, and for the ones that runs, they all fails - some quicker than others (meaning some fails after 2 to 4 photos, others fails after loading 4 to 5 pictures. Some detectors don't run at all (not found) but that's a different issue. I am uploading some test pictures for others to try. Will post the link once they become available. On Tuesday, May 29, 2012 2:53:12 PM UTC-7, Bart van Andel wrote: It would help if you provide a *detailed* description of when things go wrong instead of just saying Hugin crashes. Which version, which OS, 32 or 64 bit, amount of RAM, *specific error message*, all of those may matter. Moreover, giving incorrect information (which you did, I guess not purposefully but nonetheless) can steer your fellow group members in the wrong direction. Being precise can save everyone some time - and a little frustration. Please keep that in mind. Also, I asked which program crashed a couple replies back. Please do read answers carefully when people are offering you a hand. We are all volunteers here. Could you try to see which image the cp generators are crashing on exactly? If you find it, you may want to post it somewhere so we can have a look at it. Maybe one of your images is broken which may cause all kinds of unexpected behavior. -- Bart On Tuesday, May 29, 2012 6:02:36 PM UTC+2, ecs1749 wrote: Yes, I have done both and still fails. Incidentally, the failure is not when loading the images. It's when detecting control points. I've tried changing detectors and they all fail the same fashion (some sooner than others). On Tuesday, May 29, 2012 12:09:06 AM UTC-7, Stefan wrote: On 27.05.2012 20:28, ecs1749 wrote: I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. Have you tried to increase the image cache memory setting in the Hugin Preferences dialog? Are you sure you have enough free disk space in your TEMP directory? With kind regards Stefan Peter -- In theory there is no difference between theory and practice. In practice there is. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
Most I've seen is only 1.5G. I have 8G memory. This is during loading. On Monday, May 28, 2012 5:41:22 AM UTC-7, Bart van Andel wrote: How much memory is Hugin using when the error occurs? Are you talking about loading images inside Hugin itself or during stitching? In other words which program is failing? -- Bart -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Memory allocation issue still not resolved w 64 bit version
Actually, less than that. May be only 1.2G, even less then the 32 bit version which uses as high as 1.6G before failing. Incidentally, if I scale down each picture to 1600bits wide, I can load over a hundred pictures and process them no problem. On Monday, May 28, 2012 6:18:45 AM UTC-7, ecs1749 wrote: Most I've seen is only 1.5G. I have 8G memory. This is during loading. On Monday, May 28, 2012 5:41:22 AM UTC-7, Bart van Andel wrote: How much memory is Hugin using when the error occurs? Are you talking about loading images inside Hugin itself or during stitching? In other words which program is failing? -- Bart -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Displayed Image buttons still blocked (partially) by the horizontal scroll bar
Under Windows 7, using the new GUI 64 bit build, the Displayed Image buttons still being blocked (partially) by the horizontal scroll bar. Since there are spaces on top of these buttons, why not move them up? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Memory allocation issue still not resolved w 64 bit version
I downloaded the 64 bit version for Windows 7 and tried to load photos at full resolutions (width 4948) . Can only load 4 photos before running into the dreadful An error happened while loading image : caught exception: bad allocation. I have plenty of free memory - according to the Task Manager. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Move/Drag and Control Points
On Friday, May 25, 2012 2:35:46 PM UTC-7, Cartola wrote: No, but it uses control points. If the image you are dragging is connected, the others will go together. To fill the sky with the extra images don't make any control points on it before dragging. Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/5/25 Jan Martin janmar...@diy-streetview.org No. On Fri, May 25, 2012 at 9:59 PM, ecs1749 ecs1...@gmail.com wrote: Does Move/Drag on the Hugin Fast Review window has any effect on Control Points? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Inverted cone view
Thanks. That is indeed the problem. Dealing with the sky continues to be a headache. On Thursday, May 24, 2012 5:18:50 PM UTC-7, RizThon wrote: You're image is obviously not a 360x180, you're missing both zenith and nadir. If you give this image to PanoCube, it will simply tell you that the ratio is incorrect (should be 2x1). Just add data up and down so that you have the correct ratio (usually if I'm missing some sky I just choose some blue for the top, and usually some dark colour for the bottom). Then run again PanoCube or Pano2QTVR. 2012/5/25 ecs1749 ecs1...@gmail.com: I used Hugin and stitched using Equirectangular - not Cylindrical. On Thursday, May 24, 2012 2:23:46 PM UTC-7, ecs1749 wrote: In Hugin, I clicked Calculate and it gave me the values of HFOV 360 and VFOV of 180. On Thursday, May 24, 2012 11:20:29 AM UTC-7, Luís Henrique Camargo Quiroz wrote: Hi ecs1749! Have you checked the vfov (vertical field of view) of the image? Perhaps the interactive viewer is set with a wrong value. Luís Henrique 2012/5/24 Carlos Eduardo G. Carvalho (Cartola) cartol...@gmail.com Have you tried one of those viewers to see the jpg directly? Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/5/24 ecs1749 ecs1...@gmail.com For some unknown reason, after correcting a number of issues, the Quicktime VR movie I created becomes like an inverted cone view (imagine standing at the bottom of an inverted cone looking up): http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused800.mov as oppose to the far more pleasant street view: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0114-1.mov I have no clue what I did to cause this. The jpg was created by using Hugin, and the Quicktime conversion was created using Pano2QTVR. The jpeg appears to be normal: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused.jpg So, I am assuming I selected something when stitching that caused this. Anybody? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- -- Luis Henrique Camargo Quiroz http://luishcq.tripod.com - http://www.christusrex.org/www2/cantgreg -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Move/Drag and Control Points
Does Move/Drag on the Hugin Fast Review window has any effect on Control Points? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Inverted cone view
For some unknown reason, after correcting a number of issues, the Quicktime VR movie I created becomes like an inverted cone view (imagine standing at the bottom of an inverted cone looking up): http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused800.mov as oppose to the far more pleasant street view: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0114-1.mov I have no clue what I did to cause this. The jpg was created by using Hugin, and the Quicktime conversion was created using Pano2QTVR. The jpeg appears to be normal: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused.jpg So, I am assuming I selected something when stitching that caused this. Anybody? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Re: Inverted cone view
I wonder if this is caused by missing nadir...but shouldn't that be just a patch of black area? On Thursday, May 24, 2012 7:14:32 AM UTC-7, ecs1749 wrote: For some unknown reason, after correcting a number of issues, the Quicktime VR movie I created becomes like an inverted cone view (imagine standing at the bottom of an inverted cone looking up): http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused800.mov as oppose to the far more pleasant street view: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0114-1.mov I have no clue what I did to cause this. The jpg was created by using Hugin, and the Quicktime conversion was created using Pano2QTVR. The jpeg appears to be normal: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused.jpg So, I am assuming I selected something when stitching that caused this. Anybody? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Inverted cone view
In Hugin, I clicked Calculate and it gave me the values of HFOV 360 and VFOV of 180. On Thursday, May 24, 2012 11:20:29 AM UTC-7, Luís Henrique Camargo Quiroz wrote: Hi ecs1749! Have you checked the vfov (vertical field of view) of the image? Perhaps the interactive viewer is set with a wrong value. Luís Henrique 2012/5/24 Carlos Eduardo G. Carvalho (Cartola) cartol...@gmail.com Have you tried one of those viewers to see the jpg directly? Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/5/24 ecs1749 ecs1...@gmail.com For some unknown reason, after correcting a number of issues, the Quicktime VR movie I created becomes like an inverted cone view (imagine standing at the bottom of an inverted cone looking up): http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused800.mov as oppose to the far more pleasant street view: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0114-1.mov I have no clue what I did to cause this. The jpg was created by using Hugin, and the Quicktime conversion was created using Pano2QTVR. The jpeg appears to be normal: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused.jpg So, I am assuming I selected something when stitching that caused this. Anybody? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- -- Luis Henrique Camargo Quiroz http://luishcq.tripod.com - http://www.christusrex.org/www2/cantgreg -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Inverted cone view
I used Hugin and stitched using Equirectangular - not Cylindrical. On Thursday, May 24, 2012 2:23:46 PM UTC-7, ecs1749 wrote: In Hugin, I clicked Calculate and it gave me the values of HFOV 360 and VFOV of 180. On Thursday, May 24, 2012 11:20:29 AM UTC-7, Luís Henrique Camargo Quiroz wrote: Hi ecs1749! Have you checked the vfov (vertical field of view) of the image? Perhaps the interactive viewer is set with a wrong value. Luís Henrique 2012/5/24 Carlos Eduardo G. Carvalho (Cartola) cartol...@gmail.com Have you tried one of those viewers to see the jpg directly? Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/5/24 ecs1749 ecs1...@gmail.com For some unknown reason, after correcting a number of issues, the Quicktime VR movie I created becomes like an inverted cone view (imagine standing at the bottom of an inverted cone looking up): http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused800.mov as oppose to the far more pleasant street view: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0114-1.mov I have no clue what I did to cause this. The jpg was created by using Hugin, and the Quicktime conversion was created using Pano2QTVR. The jpeg appears to be normal: http://www.powersystemadvisors.com/cheungs/Panorama/DSC_0100-DSC_0177Final_fused.jpg So, I am assuming I selected something when stitching that caused this. Anybody? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- -- Luis Henrique Camargo Quiroz http://luishcq.tripod.com - http://www.christusrex.org/www2/cantgreg -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Why doesn't Hugin create control points vertically (it seems)?
I took a series of 360 pictures by spinning first horizontally, then tilt the camera upwards and take another revolution, with overlaps between the two revolutions. Hugin has no trouble creating control points (plenty of them) to the horizontal pictures. However, there are no control points vertically. I ended up doing it by hand which defeats the whole purpose. Am I missing something? Thanks, -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Regenerate controls points automatically from the control points window
In the control points window of Hugin, it would seem there can be a function that simply try to create control points automatically using only the two photos I am looking at. Kind of like having the Align button from Assistant but have it work only for the two pictures as displayed in the control points window. This would save a lot of time trying to match two pictures (when the first pass through the Asistant misses). I was hoping that the fine-tune button would do that but it doesn't. In fact, I don't see that the fine-tune button does anything. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] Is there an easier way to deal with the sky?
The sky continues to be the troublesome part to build a complete globe. Is there an easier way to just fill-it with something so the missing parts don't come out black? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Is there an easier way to deal with the sky?
Has anybody compiled this plug-in for Windows? Thanks. On Wednesday, May 23, 2012 3:19:54 PM UTC-7, markku...@iki.fi wrote: 24.5.2012 0:03, ecs1749 kirjoitti: The sky continues to be the troublesome part to build a complete globe. Is there an easier way to just fill-it with something so the missing parts don't come out black? Use the GIMP resynthesizer plug-in: http://registry.gimp.org/node/25219 If you have Photoshop, the context-aware fill may do the same thing but I haven't tested that. -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Is there an easier way to deal with the sky?
What does it mean by using Mask to fill-it? On Wednesday, May 23, 2012 3:11:43 PM UTC-7, Bruno Postle wrote: On Wed 23-May-2012 at 14:03 -0700, ecs1749 wrote: The sky continues to be the troublesome part to build a complete globe. Is there an easier way to just fill-it with something so the missing parts don't come out black? You can reuse bits of sky from photos in the panorama, see this mini tutorial: http://www.flickr.com/photos/36383814@N00/6327106374 -- Bruno -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Is there an easier way to deal with the sky?
I got it. I see what you did there. On Wednesday, May 23, 2012 5:23:41 PM UTC-7, ecs1749 wrote: What does it mean by using Mask to fill-it? On Wednesday, May 23, 2012 3:11:43 PM UTC-7, Bruno Postle wrote: On Wed 23-May-2012 at 14:03 -0700, ecs1749 wrote: The sky continues to be the troublesome part to build a complete globe. Is there an easier way to just fill-it with something so the missing parts don't come out black? You can reuse bits of sky from photos in the panorama, see this mini tutorial: http://www.flickr.com/photos/36383814@N00/6327106374 -- Bruno -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] Why doesn't Hugin create control points vertically (it seems)?
Ok, that does work better. Thanks. On Wednesday, May 23, 2012 3:11:58 PM UTC-7, Bruno Postle wrote: On Wed 23-May-2012 at 09:53 -0700, ecs1749 wrote: I took a series of 360 pictures by spinning first horizontally, then tilt the camera upwards and take another revolution, with overlaps between the two revolutions. Hugin has no trouble creating control points (plenty of them) to the horizontal pictures. However, there are no control points vertically. The default is for Hugin to use the cpfind --multirow option for control point generation. Can you edit the Preferences for the default control point detector, remove the '--mutirow' bit and see if this makes any difference for you? -- Bruno -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
[hugin-ptx] What do I do now?
I took a bunch of pictures for a 360-180 shoot and processed through Hugin. I got a nice looking globe in the Fast Panorama preview window. Then I went through the control points and got the max error or distance to less than a 100. Set projection to Sterescope and click Stitch. After a while, I look at the directory and see a whole mess of files. But now what do I do with all these files so that I can end*up with a Qtime VR of my Panorama? There are a number of references but none of them tells me what my next step should be.* * * *Please help.* -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] What do I do now?
On Tuesday, May 22, 2012 2:44:08 AM UTC-7, markku...@iki.fi wrote: 22.5.2012 8:20, ecs1749 kirjoitti: Set projection to Sterescope and click Stitch. Do you mean Stereographic? You can't get full 360x180 degree field of view in stereographic projection (the image would become infinite size) and you should use Equirectangular output projection if you want to convert into a Quicktime cube. Thanks for the reply. Yes, I meant Stereographic. After a while, I look at the directory and see a whole mess of files. There should be only one output file. A mess of files indicates that stitching has failed due to some error. I retried using Equirectangular and I ended up with a jpg, a bunch of tif files, exr, pgm files, and a message that the process is completed. Now what do I do? In previous tries, I would feed the jpg to Mathmap and create a projected picture of the front of the globe. But what happened to the rest of the pictures (the ones on the back side of the globe)? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] What do I do now?
But once I get the output files, what do I do with them? http://hugin.sourceforge.net/tutorials/enfuse-360/en.shtml indicates there is a enfuse 360 program but I don't see that anywhere... On Tuesday, May 22, 2012 1:42:43 PM UTC-7, Cartola wrote: You need to know what to choose as output in the Stitcher tab. To have tif, exr and other files beside the equirectangular one you might have checked many output formats. You only need to choose one output. Try one at each time to see what they are. And you probably wont need any Remapped images format by now. The default is a TIF file corresponding to the Exposure corrected, low dynamic range. Try to let only this one checked at the Panorama Outputs. Cheers, Carlos E G Carvalho (Cartola) http://cartola.org/360 http://cartola.org/panoforum 2012/5/22 ecs1749 ecs1...@gmail.com On Tuesday, May 22, 2012 2:44:08 AM UTC-7, markku...@iki.fi wrote: 22.5.2012 8:20, ecs1749 kirjoitti: Set projection to Sterescope and click Stitch. Do you mean Stereographic? You can't get full 360x180 degree field of view in stereographic projection (the image would become infinite size) and you should use Equirectangular output projection if you want to convert into a Quicktime cube. Thanks for the reply. Yes, I meant Stereographic. After a while, I look at the directory and see a whole mess of files. There should be only one output file. A mess of files indicates that stitching has failed due to some error. I retried using Equirectangular and I ended up with a jpg, a bunch of tif files, exr, pgm files, and a message that the process is completed. Now what do I do? In previous tries, I would feed the jpg to Mathmap and create a projected picture of the front of the globe. But what happened to the rest of the pictures (the ones on the back side of the globe)? -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
Re: [hugin-ptx] What do I do now?
So, that's the missing link! I tried panocube and somehow it doesn't work for me but I looked around and found Pano2QTVR and that works. I ran the jpg created by Hugin through Pano2QTVR which created a QTVR mov file for me. Opened the mov file w Quicktime and viola! a VR of my shots. Thanks, On Tuesday, May 22, 2012 7:35:33 PM UTC-7, RizThon wrote: 2012/5/23 ecs1749 ecs1...@gmail.com: But once I get the output files, what do I do with them? http://hugin.sourceforge.net/tutorials/enfuse-360/en.shtml indicates there is a enfuse 360 program but I don't see that anywhere... To create QTVR I first create my 360x180 jpg image using hugin (if I have a 360xless than 180 I add the necessary number of pixels at the top and bottom so that the ratio is 2x1), then I use PanoCube http://www.panoshow.com/panocube.htm -- You received this message because you are subscribed to the Google Groups Hugin and other free panoramic software group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx