RES: SFTP between AIX to Mainframe
Verify if MDI From Luminex Inc can help you. www.luminex.com Carlos Bodra IBM System Certified System z São Paulo - Brazil -Mensagem original- De: IBM Mainframe Discussion List Em nome de venkat kulkarni Enviada em: domingo, 9 de dezembro de 2018 14:35 Para: IBM-MAIN@LISTSERV.UA.EDU Assunto: SFTP between AIX to Mainframe Hello Group, We have some FTP job enabled b/w AIX to MF and now we have requirement to convert them into SFTP. But as AIX is ascii and MF is EBCDIC system. How this transfer will work. Also, currently FTP process use ascii mode to transfer data and SFTP is available only with binary mode how this whole process will work . Can you please help. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RES: Question about Luminex VTS solutions
I had 12 different boxes installed in 11 different customers with z/OS (v1 and v2), OS/390 (v2), z/VM (v5 v6), z/VSE (v5) and VSE/ESA (v2). One of customers has 2 boxes (production and DR) using replication. All these boxes has being installed since 2012 and has no trouble with hardware and small software problems was solved fast by Luminex support, including asking for some new facilities. Carlos Bodra IBM System Certified System z São Paulo - Brazil -Mensagem original- De: IBM Mainframe Discussion List Em nome de Todd Burrell Enviada em: sexta-feira, 7 de setembro de 2018 15:54 Para: IBM-MAIN@LISTSERV.UA.EDU Assunto: Question about Luminex VTS solutions Does anyone have any experience with Luminex virtual tape solutions? We saw a presentation today that was fairly impressive, but we would like to be sure that they actually work as well as they say. Please email me directly. Todd Burrell todd_burr...@csx.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RES: SHARE handouts
After some research at SHARE site I discover that I can register without payment and get access to presentations of last Share. Carlos Bodra IBM System Certified System z São Paulo - Brazil -Mensagem original- De: IBM Mainframe Discussion List Em nome de Ed Jaffe Enviada em: sexta-feira, 24 de agosto de 2018 15:30 Para: IBM-MAIN@LISTSERV.UA.EDU Assunto: Re: SHARE handouts On 8/24/2018 9:14 AM, Jesse 1 Robinson wrote: > SHARE has no control over submission other than putting in place a mechanism > facilitate it. It's up to the presenter to make it happen. It should also be noted that access to the proceedings is a SHARE member benefit. Individual presenters own their own material (not SHARE) and therefore they can make it publicly or privately available any time they like (as I routinely do). -- Phoenix Software International Edward E. Jaffe 831 Parkview Drive North El Segundo, CA 90245 https://www.phoenixsoftware.com/ This e-mail message, including any attachments, appended messages and the information contained therein, is for the sole use of the intended recipient(s). If you are not an intended recipient or have otherwise received this email message in error, any use, dissemination, distribution, review, storage or copying of this e-mail message and the information contained therein is strictly prohibited. If you are not an intended recipient, please contact the sender by reply e-mail and destroy all copies of this email message and do not otherwise utilize or retain this email message or any or all of the information contained therein. Although this email message and any attachments or appended messages are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way from its opening or use. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RES: SHARE handouts
I guess that SHARE allows download of presentations only for members or who participate of conference in target; I support your opinion about make presentations available to everyone after conference has ended. Carlos Bodra IBM System Certified System z São Paulo - Brazil -Mensagem original- De: IBM Mainframe Discussion List Em nome de R.S. Enviada em: sexta-feira, 24 de agosto de 2018 06:45 Para: IBM-MAIN@LISTSERV.UA.EDU Assunto: SHARE handouts Is there any repository for SHARE conference materials? Sometimes it's possible to download the PDF file and sometimes not. I guess SHARE is not interested in sharing that outside the organisation (at least not just in time of conference), however many presentations are available. What are the rules? What are the links for download? Are there any rules? BTW: From copyright point of view, as far as I understand the presentation is owned by the author and usually author is willing to *share* it... -- Radoslaw Skorupka Lodz, Poland == Jeśli nie jesteś adresatem tej wiadomości: - powiadom nas o tym w mailu zwrotnym (dziękujemy!), - usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś na dysku). Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać karze. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 025237, NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 01.01.2018 r. wynosi 169.248.488 złotych. If you are not the addressee of this message: - let us know by replying to this e-mail (thank you!), - delete this message permanently (including all the copies which you have printed out or saved). This message may contain legally protected information, which may be used exclusively by the addressee.Please be reminded that anyone who disseminates (copies, distributes) this message or takes any similar action, violates the law and may be penalised. mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital City of Warsaw, 12th Commercial Division of the National Court Register, KRS 025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 169,248,488 as at 1 January 2018. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
TS7760
Can IBM TS7760 configured to virtualize tapes for Open Systems? If not, what can be used to virtualize tapes for Open Systems from IBM or not. Carlos Bodra IBM System Certified System z São Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RACF x CA-TopSecret
I need to convert some RACF commands showed bellow to CA-TOP SECRET commands. Since I do not know nothing about CA-TS syntaxes, can anyone help me? Or tell me if there is any document about this? RDEFINE FACILITY LUMXPROC.SFTP.PUT.** LEVEL(00) OWNER(MDIADMIN) UACC(NONE) RALTER FACILITY LUMXPROC.SFTP.PUT.** LEVEL(00) OWNER(MDIADMIN) UACC(NONE) RALTER FACILITY LUMXPROC.SFTP.PUT.** AUDIT(NONE) SETROPTS RACLIST(FACILITY) REFRESH PERMIT LUMXPROC.SFTP.PUT.** CLASS(FACILITY) RESET(STANDARD) PERMIT LUMXPROC.SFTP.PUT.** CLASS(FACILITY) ID(JOBMAN) ACCESS(READ) * AUTHORIZE MDICLASS=SFTP DIRECTION=GET ... ANY MDI PROFILE NAME RDEFINE FACILITY LUMXPROC.SFTP.GET.** LEVEL(00) OWNER(MDIADMIN) UACC(NONE) RALTER FACILITY LUMXPROC.SFTP.GET.** LEVEL(00) OWNER(MDIADMIN) UACC(NONE) RALTER FACILITY LUMXPROC.SFTP.GET.** AUDIT(NONE) WARNING SETROPTS RACLIST(FACILITY) REFRESH PERMIT LUMXPROC.SFTP.GET.** CLASS(FACILITY) RESET(STANDARD) PERMIT LUMXPROC.SFTP.GET.** CLASS(FACILITY) ID(JOBMAN) ACCESS(READ) Thanks a lot for helping Carlos Bodra IBM System Certified System z São Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
How to erase TS7740 data before scrap
We are replacing IBM TS7740 with new TS7760 and need to do a Cluster Cleanup (FC 4017 This feature is a factory default button, clear all data, all tables, etc..). IBM says that this feature is withdrawn and no more available. What can we use in place of it or any suggestion about how to clear data from it? Carlos Bodra IBM System Certified System z São Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Software costs - CPU Replacement
We are studying to replace old IBM z890 Capacity Setting 230 (170 Mips 26 MSU´s) by an IBM z10 BC Capacity Setting J02 (182 Mips 23 MSU´s). We understand that since MSU´s are lower in z10BC (23 x 26 MSU´s), we should pay less for software contracts with IBM, CA and SoftwareAG. This situation is correct for IBM and CA, but not for SoftwareAG since they charge by MIPS not MSU´s. Questions about: 1 Anyone had any experience with this? 2 IBM and CA accepts capping to charge software, SoftwareAG not, is this a normal business practice? 3 Any ideas how to circumvent this situation? z890 is out of IBM service and we need to replace it. 2nd hand machine available closer to z890 capacity is z10BC, even due z/OS-e will run there with few ptfs applied to support new hardware (z10BC). Thanks Carlos Bodra IBM System Certified System z São Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RES: EMC DLm to the Cloud
I did some tests with another Vendor similar to DellEMC solution moving data from virtual tape to cloud and results was not good. A bigger bigger reclaim time to get dataset available to mainframe, and very expensive. I need to store about 240TB in cloud and cost quiet project. We buy more midrange storage and save a lot of money and get a much more fast reclaim time to get dataset available to restore. Carlos Bodra IBM System Certified System z São Paulo - Brazil -Mensagem original- De: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] Em nome de R.S. Enviada em: sexta-feira, 21 de julho de 2017 11:52 Para: IBM-MAIN@LISTSERV.UA.EDU Assunto: Re: EMC DLm to the Cloud W dniu 2017-07-21 o 16:32, Lizette Koehler pisze: > http://www.storagereview.com/dell_emc_announce_dlm_45_to_eliminate_phy > sical_tape > > > Today at SHARE 2017, Dell EMC announced the latest version of its Disk > Library for mainframe (DLm) virtual tape, version 4.5. The latest > version of Dell EMC's cloud-based virtual tape is aiming to replace > physical tape as the go to long-term retention strategy. Dell EMC > states that DLm 4.5 can make the mainframe data center more efficient > by moving mainframe virtual tape data to the cloud. > > > I am not sure how big the "cloud" would have to be for some shops. That's simple: a company sells no tapes. Only disk systems. What can they claim? BTW: real tapes, on foreground or just background of some VTS are really give way to disks. From the other hand, spinning disks give way to SSDs. SSDs disks (more exactly: SSD with disk interface) give way to flash systems... -- Radoslaw Skorupka Lodz, Poland == -- Treść tej wiadomości może zawierać informacje prawnie chronione Banku przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne działanie o podobnym charakterze jest prawnie zabronione i może być karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorized to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2016 r. kapitał zakładowy mBanku S.A. (w całości wpłacony) wynosi 168.955.696 złotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
CA-TLMS information
Thanks a lot It is exactly what I´m looking for. Carlos Bodra IBM System Certified System z São Paulo - Brazil -Mensagem original- De: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] Em nome de Bob Van Horn Enviada em: quinta-feira, 13 de julho de 2017 13:27 Para: IBM-MAIN@LISTSERV.UA.EDU Assunto: Re: CA-TLMS information You can download the TLMS megabyte report via the following link: https://www.ca.com/us/services-support/ca-support/ca-support-online/knowledge-base-articles.TEC1366823.html * This is an EARL program that will list out the information you are looking for. Let me know if you need any help with this. Thanks Bob Van Horn vanr...@ca.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
CA-TLMS information
Hello I´m not confident with CA-TLMS software, but I need to know about volser usage (MB written) and percentage of volser used. I checked CA-TLMS reports and found no one that can give me this information. Anyone knows how to get this info. I need to estimate amount of data that is stored in each actual volser (3490/3590) for technology migration to new cartridges (3592) to define how many new cartridges I need to buy. Thanks Carlos Bodra IBM System Certified System z São Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
RES: SFTP on z/OS
Check MDI product at luminex.com for fast and secure SFTP or FTP
Carlos Bodra
IBM System Certified System z
São Paulo - Brazil
-Mensagem original-
De: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] Em nome de
venkat kulkarni
Enviada em: domingo, 29 de janeiro de 2017 14:38
Para: IBM-MAIN@LISTSERV.UA.EDU
Assunto: SFTP on z/OS
Hello Group,
We tested SFTP on our test z/OS system to Test AIX box and we are able to
transfer data between these host. But now, I am trying in production system
with below detail.
1) Our aim is to convert all our FTP jobs into SFTP.
2) We are using $universe as scheduler for submitting these FTP jobs on time to
time.
3) We using user called "STCSYS" all these jobs.
4) But in FTP jobs, for every other host ( Ex AIX1, AIX2,AIX3 etc) we are using
different user id password to login to target host and then start FTP process.
5) But in SFTP, it create TSO env using IKJEFT01 program and then run SFTP
commands to transfer files between systems.
Example of SFTP Job, we using
//SFTPSFT JOB (7330),MSGCLASS=X,MSGLEVEL=(1,1),CLASS=P,
// NOTIFY=
//STEP1 EXEC PGM=IKJEFT01,REGION=0M
//SYSEXEC DD DISP=SHR,DSN=SYS1.SBPXEXEC
//SYSTSIN DD DSN=SFTPSFT.TEST.JCL(FTPTST1),DISP=SHR
//OUTPUT DD SYSOUT=*
//SYSTSPRT DD SYSOUT=*
/*
EDIT SFTPSFT.TEST.JCL(FTPTST1) - 01.02
Command ===>
** * Top of Data
000800 OPUT 'SFTPSFT.SFTP.TEST(SFTP1)' '/u/SFTPSFT/vp12'
000900 OSHELL { echo 'lcd /u/stcsys' ; +
001000 echo 'ascii'; +
001100 echo 'cd /home/ftp4rpt/'; +
001200 echo 'mput test.txt'; } | +
001300sftp -v ftprpt@10.22.22.220
001400 /*
So, now I have stcsys user id created on mainframe with all
# cd .ssh
# ls -al
total 96
drwx-- 2 MEAS OMVSGRP 8192 Jan 24 08:23 .
drwxr-xr-x 3 MEAS OMVSGRP 8192 Jan 24 08:22 ..
-rw--- 1 MEAS OMVSGRP 791 Jan 24 08:36 authorized_keys
-rw--- 1 MEAS OMVSGRP 1675 Jan 24 08:23 id_rsa
-rw-r--r-- 1 MEAS OMVSGRP 396 Jan 24 08:25 id_rsa.pub
-rw-r--r-- 1 MEAS OMVSGRP 697 Jan 29 10:26 known_hosts
# pwd
/u/stcsys/.ssh
and in AIX1 side, I have ftprpt user defined and
$ cd /home/ftprpt /.ssh
$ ls -al
total 48
drwx--2 ftprpt staff 256 Jan 13 15:37 .
drwxr-xr-x3 ftprpt staff 4096 Jan 15 12:15 ..
-rw-r--r--1 ftprptstaff 791 Jan 15 12:12 authorized_keys
-rw-r--r--1 ftprpt staff 395 Jan 13 15:37
authorized_keys.old
-rw---1 ftprpt staff 1675 Dec 11 14:25 id_rsa
-rw-r--r--1 ftprpt staff 394 Dec 11 14:25 id_rsa.pub
-rw-r--r--1 ftprpt staff 352 Jan 15 10:31 known_hosts
$
and we exchanged rsa.pub key in authorized_keys file and exchanged ECDSA.pub
key in known_hosts file but while running Job, I am getting below issue.
OpenSSH_6.4, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Reading configuration data /etc/ssh/zos_ssh_config
debug1: zsshSmfSetConnSmfStatus: SMF status is 0
debug1: Connecting to 10.22.22.220 Ý10.22.22.220¨ port 22.
debug1: Connection established.
debug1: cipher_init: none from source OpenSSL
debug1: cipher_init: none from source OpenSSL
debug1: permanently_set_uid: 0/1000
debug1: identity file /u/stcsys/.ssh/id_rsa type 1
debug1: identity file /u/stcsys/.ssh/id_rsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.4
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0
debug1: match: OpenSSH_6.0 pat OpenSSH*
FOTS1061 key_read: uudecode E2VjZHNhLXNoYTItbmlzdHAyNTYIbm
lzdHAyNTYAAAB
failed
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: mac_setup_by_alg: hmac-sha1 from source OpenSSL
debug1: kex: server->client aes128-ctr hmac-sha1 none
debug1: mac_setup_by_alg: hmac-sha1 from source OpenSSL
debug1: kex: client->server aes128-ctr hmac-sha1 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<2048<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA ce:14:d1:2f:b2:d1:7c:83:12:9a:16:1e:31:9d:b6:b7
FOTS1061 key_read: uudecode E2VjZHNhLXNoYTItbmlzdHAyNTYIbm
lzdHAyNTYAAAB
failed
debug1: read_passphrase: can't open /dev/tty: EDC5128I No such device.
(errno2=0
FOTS1370 Host key verification failed.
debug1: zsshSmfSetConnSmfStatus: SMF status is 0
FOTS0841 Connection closed
Can you please help, if I am not following correct way on this new setup or I
should be using same userid on both mainframe and aix side for exchanging keys
with password less.
Thanks in advance.
testing
testing due low traffic since yesterday -- CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Is Redbooks down?
I´m getting no access too! CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL Em 15/08/2016 17:37, Ward, Mike S escreveu: Hello all, I have been trying to get to redbooks. Is this service down? http://www.redbooks.ibm.com/ == This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to which it is addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this message by mistake and delete this e-mail from your system. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Old OS/390 1.3 loading in z890
Hello, I´m trying to load an old OS/390 1.3 in a z890. Since I´m ipling with loadparm cuuxxM (to get messages) I can see that until it check page allocations all is going fine. Next message is IEA304W SYSTEM WAIT STATE CODE 80009064 DURING IEAVNP8B INITIALIZATION so a disable wait code 9064 pointing to module ieavnp8b and all is finished. I found some apars saying about a commun problem about ESQA, but SQA/ESQA parm in LOADxx isin´t supported in this old version. Many problems is reported in google using Hercules, but I´m using a real z890 machine. Same system goes up ok if I IPL it in a 9672 R36. I know that this is a very old system, loose support before z890 comes to streets, so no support is warranty from IBM. But I´m just curiosuos if we can made this old system (31 bits) runs in a 64 bits machine (z890 that is actually available). Any comments or hints about Thanks -- CARLOS BODRA São Paulo - SP - BRAZIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ADR309E Message during Restore
Thanks very much for this. Really I don´t guess about to read 2721 as hexa number but a normal number since it isn´t in x'' or 0x. 0d0b is clear that is hexa number but 2721 isn´t. Any way thanks again. CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL Em 04/05/2016 15:16, John McKown escreveu: On Wed, May 4, 2016 at 1:01 PM, J R <jayare...@hotmail.com> wrote: In light of this confusion, one wonders why the developer opted to format the message in hexadecimal. At the very least, he should have either done a x'' like HLASM or a 0x like C. Sent from my iPhone On May 4, 2016, at 13:56, Greg Dyck <gregd...@pobox.com> wrote: On 5/4/2016 10:41 AM, Carlos Bodra wrote: SOURCE AND TARGET DEVICE CAPACITIES DO NOT MATCH. CYLINDER CAPACITY OF SOURCE VOLUME 2721, TARGET VOLUME 0D0B. This tells me that source volume has 2721 cylinders and target volume has 3339 cylinders (0d0b). No, the source volume has 10017 cylinders (x'2727). You need to pick a different target volume to use for the restore. Greg -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ADR309E Message during Restore
Hello I´m trying to restore a full volume backed up with ADRDSSU utility and during restore I´m getting following message: SOURCE AND TARGET DEVICE CAPACITIES DO NOT MATCH. CYLINDER CAPACITY OF SOURCE VOLUME 2721, TARGET VOLUME 0D0B. This tells me that source volume has 2721 cylinders and target volume has 3339 cylinders (0d0b). My question is how to bypass this condition checking and restore from tape source volume in a new target volume. Thanks -- CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z13 BC????
Got them Thanks Bill CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL Em 27/01/2016 11:48, Bill Woodger escreveu: Harv Emery's Seattle Presentation on z13/zBX -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z13 BC????
I haven´t access to protect area of Share Sessions handouts. CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL Em 27/01/2016 10:51, Richards, Robert B. escreveu: http://www.share.org/p/do/sd/topic=421=11359 Part 1 http://www.share.org/p/do/sd/topic=421=11320 Part 2 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Ted MacNEIL Sent: Wednesday, January 27, 2016 5:51 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z13 BC 404 not found -teD Original Message From: Ed Finnell Sent: Tuesday, January 26, 2016 16:25 To: IBM-MAIN@LISTSERV.UA.EDU Reply To: IBM Mainframe Discussion List Subject: Re: z13 BC They've been doing announcements around SHARE so might be a good place to find out more faster. WSC's Harv Emery's Seattle Presentation on z13/zBX rollout super informative. https://share.confex.com/share/124/webprogram/Handout/ In a message dated 1/26/2016 10:45:13 A.M. Central Standard Time, allan.stal...@wunderman.com writes: Rumored to be announced this spring! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
z13 BC????
Hi, I just installed a new version of IBM Configurator and now appers a new z13 machine called "z13s" with Machine type 2965 and models L10, L20 (seems to be linux only machines) and N10 N20 (seems to be machines with CP, ICF and IFL processors). I looked for in Announcement Letter database for machine type 2965 and get nothing... Is this new z13s (from Small) equivalent to old zXX BC machines??? Anyone receives any information from IBM about?? .ppt presentations??? -- CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Big Blue’s big storage iron gets bigger: DS8880 array uncloaked
Any one has url for IBM announcement letter of DS8880? I can´t find it and didn´t remember to see annoucement in last letters. CARLOS BODRA IBM Certified zSystem São Paulo - SP - BRAZIL Em 15/10/2015 01:35, Ed Gould escreveu: http://www.theregister.co.uk/2015/10/14/ibm_ds8880_array/ There are three models: DS8884 entry-level system that saves on space and features easy-to-use operations and continuous availability for running critical workloads. DS8886 mid-range array with double the DS88770 speed, six nines availability and multi-site replication. DS high-end product with all-flash media and non-stop operations The array can scale up from 3TB to just over 3PB2 and has a high-performance flash enclosure (HPFE) module, with 400GB “ultra-fast flash cards” for the highest data access speeds. We’re told storage pool striping and flash drives can virtually eliminate disk “hot spots.” -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: 3480/3490 Tape Migration Services
Luminex, has virtualization appliance and provides migrations services *Carlos Bodra IBM Certified zEnterprise Sao Paulo - SP - BRAZIL* Em 30/07/2015 14:58, Tony Harminc escreveu: On 30 July 2015 at 13:02, Pfister, Nathan nathanpfis...@donegalgroup.com wrote: I am possibly looking to contract out a migration of legacy data mainly housed on 3480 and 3490 tapes. We no longer have the capability to read these tapes (as we no longer have the drives necessary) so I want to virtualize these tapes (z/OS and VSE tapes both). I was wondering if anyone could recommend any company that could do this type of migration that you may have worked with in the past. Cartagena Software does exactly this kind of thing. They have a lot of experience. http://cartagena.com/ Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: 1403 at 60Hz
If I remember, there are some capacitors to be changed near big cables connections, motors need to be rewired from 50 to 60Hz (different connections at terminal blocks TB´s) thats all I remember. *Carlos Bodra IBM Certified zEnterprise Sao Paulo - SP - BRAZIL* Em 28/07/2015 20:23, glen herrmannsfeldt escreveu: I wonder if anyone knows what has to change to move a 1403 from 50Hz to 60Hz? If they use synchronous motors, then some belts or gears would be different. For transformers, you need more iron in the core for 50Hz, so 50Hz transformers should be fine at 60Hz, but not always the other way around. That might also be true for motors, but synchronous motors will run faster. thanks, -- glen -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Some help with racf
We are getting following console log for a adrssu job. Can anyone tell me what is wrong? Is racf avoiding volume usage? How can we chance this? 9.07.05 JOB07892 WEDNESDAY, 29 OCT 2014 09.07.05 JOB07892 IRR010I USERID P000442 IS ASSIGNED TO THIS JOB. 09.07.10 JOB07892 ICH70001I P000442 LAST ACCESS AT 09:05:36 ON WEDNESDAY, OCTOBER 29, 2014 09.07.10 JOB07892 $HASP373 PCP0P442 STARTED - INIT 27 - CLASS E - SYS PD00 09.07.10 JOB07892 IEF403I PCP0P442 - STARTED - TIME=09.07.10 09.07.10 JOB07892 *IEF233A M 0506,SCRTCH,,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.11 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0001,PCP0P442,STEP01 09.07.11 JOB07892 IEC502E R 0506,CS0001,SL,PCP0P442,STEP01 09.07.11 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0002,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0002,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0003,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0003,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0004,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0004,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0005,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0005,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0006,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0006,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0007,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0007,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 09.07.12 JOB07892 IEC089I 01 RACF VOL SET CONFLICT 0506,CS0008,PCP0P442,STEP01 09.07.12 JOB07892 IEC502E R 0506,CS0008,SL,PCP0P442,STEP01 09.07.12 JOB07892 *IEC501A M 0506,PRIVAT,SL,COMP,PCP0P442,STEP01,F5199.CFPP.GERAL 1 //PCP0P442 JOB (5100,,99),MSGCLASS=P,CLASS=E,NOTIFY=P000442 JOB07892 //* 00013000 2 //STEP01 EXEC PGM=ADRDSSU,REGION=4096K 00014400 3 //SYSPRINT DD SYSOUT=(A,,STD1)00015005 4 //SYSOUT DD SYSOUT=(A,,STD1)00016002 5 //CART1 DD DSN=F5199.CFPP.GERAL, 00017000 // DISP=(,CATLG),LABEL=(,SL),UNIT=VTL,VOL=SER=SCRTCH 00018004 6 //SYSIN DD DDNAME=SYSIPT 00019000 7 //SYSIPT DD * /* M E S T R E MM0008 ICH70001I P000442 LAST ACCESS AT 09:05:36 ON WEDNESDAY, OCTOBER 29, 2014 IEF236I ALLOC. FOR PCP0P442 STEP01 IEF237I JES2 ALLOCATED TO SYSPRINT IEF237I JES2 ALLOCATED TO SYSOUT IGD100I 0506 ALLOCATED TO DDNAME CART1DATACLAS () -- *Carlos Bodra IBM Certified zEnterprise Sao Paulo - SP - BRAZIL* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Visara Virtual Tape
Try www.luminex.com Very easy implemantation and administration *Carlos Bodra IBM Certified zEnterprise Sao Paulo - SP - BRAZIL* Em 05/08/2014 16:09, Vinson Lee escreveu: Hello, We're looking into VTLs. Is anyone using Visara's virtual tape appliance or library? Would you please share your experience with the company as far as support and hardware reliability? Thanks in advance. Vince -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IOCDS Write Protected
You need to go to HMC select Single Object, look for Input Output Prrogam, select slot A0 and unprotect it Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 21/02/2014 14:24, Dazzo, Matt escreveu: Attempting to build a new IOCDSA0 but getting the error below. According to msg ICP408I to correct this issue ' use Disable Write Protection under Options on the Input/Output Configuration panel' but exactly where is that and how do I change it? Thanks Matt The current activation profile on the HMC is A3. ICP408I IOCDS A0 IS WRITE PROTECTED Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Sources for learing about state of the art Mainframe Virtual and physical tape?
It is user and password protect!!! Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 01/10/2013 18:06, Lizette Koehler escreveu: Also this share presentation by Russell Witt could be helpful http://www.share.org/p/do/sd/topic=50sid=1042 The title of the presentation is Tape Virtualization Options You can also use that in an internet search to find a lot more articles on virtual tape and mainframes. Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
IMS startup abend
Hi, Since I´m not an expert in IMS, any hint about following problem will be welcome. After a application of PSP bucket for install new storage (DS6800) in a z/OS 1.4, all ptf´s were checked and applied (satisfying actions) and IPL was done. All other sub systems come up error free, but IMS is abending with following messages at console: R 7,/NRE CHKPT 00 IEE600I REPLY TO 07 IS;/NRE CHKPT 00 DFS058I NRESTART COMMAND IN PROGRESS IMSP *08 DFS996I *IMS READY* IMSP DFS629I IMS CTL TCB ABEND - SYS 0C4 IMSP DFS629I PSW AT ERROR = 077C2000 8AACB3D8 IMSP DFS629I MODID = UNKNOWN EPA = UNKNOWN IMSP DFS629I R0-3 0C2C4500 3E000841 00C6D060 00C9FD30 IMSP DFS629I R4-7 0A88CB28 00CA0498 0A88CA68 00C6AF3C IMSP DFS629I R8-11 008B9390 8AAC9F9A 0AACB142 IMSP DFS629I R12-15 0AACB3A8 00C73A58 0AACB3A8 IMSP IEA995I SYMPTOM DUMP OUTPUT 167 SYSTEM COMPLETION CODE=0C4 REASON CODE=0010 TIME=14.07.57 SEQ=00035 CPU= ASID=0031 PSW AT TIME OF ERROR 077C2000 8AACB3D8 ILC 4 INTC 10 ACTIVE LOAD MODULE ADDRESS=0AAC9DA0 OFFSET=1638 NAME=DFSAOS60 DATA AT PSW 0AACB3D2 - 10184780 C03891C0 10104710 GR 0: 0C2C4500 1: 3E000841 2: 00C6D060 3: 00C9FD30 4: 0A88CB28 5: 00CA0498 6: 0A88CA68 7: 00C6AF3C 8: 008B9390 9: A: 8AAC9F9A B: 0AACB142 C: 0AACB3A8 D: 00C73A58 E: F: 0AACB3A8 END OF SYMPTOM DUMP IEA848I DUMP SUPPRESSED - ABDUMP MAY NOT DUMP STORAGE FOR KEY 0-7 JOB IMSPCTL IEE400I THESE MESSAGES CANCELLED - 08. DFS629I IMS DLI TCB ABEND - IMS 0150 IMSP IEA995I SYMPTOM DUMP OUTPUT 171 USER COMPLETION CODE=0150 TIME=14.07.57 SEQ=00036 CPU= ASID=0031 PSW AT TIME OF ERROR 070C 8AABE204 ILC 4 INTC FE NO ACTIVE MODULE FOUND NAME=UNKNOWN DATA AT PSW 0AABE1FE - 1F001F11 05EF94BF 806558B0 GR 0: 008FF0E0 1: 008E0F58 2: CBF04313 3: 0024 4: 00C82BF0 5: FF37D410 6: 0AABDE8E 7: 8: 00C82BF0 9: 00250025 A: 0AA41448 B: 005E C: 008E0F58 D: 00F84000 E: 8AABE056 F: 005E END OF SYMPTOM DUMP IEA989I SLIP TRAP ID=X13E MATCHED. JOBNAME=IMSPDLI , ASID=0025. DFS629I IMS STC TCB ABEND - IMS 0150 IMSP IEA989I SLIP TRAP ID=X13E MATCHED. JOBNAME=IMSPDLI , ASID=0025. DFS629I IMS DYD TCB ABEND - IMS 0150-DLS IMSP IEA989I SLIP TRAP ID=X13E MATCHED. JOBNAME=IMSPDLI , ASID=0025. DFS629I IMS DYS TCB ABEND - IMS 0150-DLS IMSP DFS603I IMS DLS CLEANUP ( EOT ) COMPLETE FOR JS IMSPDLI IMSPDLI S ,RC=00 IEF450I IMSPDLI IMSPDLI - ABEND=S000 U0150 REASON= 179 TIME=14.07.57 IEF404I IMSPDLI - ENDED - TIME=14.07.57 IEF352I ADDRESS SPACE UNAVAILABLE HASP395 IMSPDLI ENDED What should I verify as 1st check about missing something after psp application. Could be missing some action to do that is mandatory after ptf´s? Thanks in advance. -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Escon to Ficon Converter
Hello I just know one supplier (http://www.opticatech.com/products/prizm/) has these converters available. IBM converters are Optica. Any other? -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
TCP/IP Profile
Hello I'm trying to bring up a tcp ip connection in an ancient OS/390 2.5 to recover some files. My home address is 201.56.73.235 (this is a valid internet address). I'm having trouble with two next parms that are Gateway and Defaultnet. When I code folowing definitions I can connect from address 201.56.73.227 (another ip address in my block) but not from other ip's. DEVICE MAN250 LCS 250 LINK MANLCS0 ETHERNET 0 MAN250 HOME 201.65.37.235 MANLCS0 GATEWAY 201.65.37 = MANLCS0 1500 0 DEFAULTNET 201.65.37.225 MANLCS0 1500 201.65.37.225 is my isp provider router address. I need to make this connection available to any other internet ip address. What is coded wrong. My network address are: 201.65.37.224 - Network address 201.65.37.225 - ISP router address 201.65.37.226 to 201.65.37.234 - Other servers 201.65.37.235 - OS/390 2.5 CS 201.65.37.236 to 201.65.37.238 - Reserved for future use 201.65.37.239 - Broadcast. Please comments and hints how to make this connection available to internet are welcome. -- Carlos Bodra Sao Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
IBM 3577-L5U with 3592-E05 drives
Hi Anyone using tape library IBM 3577-L5U (TS3400) with 3592-E05 drives under z/OS control (DFDSSrmm)? Please contact me off list. Thanks -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DS6800 3390 quesation
Hi, In IOCP/IOCDS we didn´t define volume type (3390-1, 3390-2, 3390-3, 3390-9 etc...), just define 3390. In DS6800 definition panels we define a runge of volumes with for example 3339 cyls for model 3 and another range with 10017 (model 9). Both ranges could be continuos addresses, 3390-3 from A000 till A03F (64 volumes) and A040 till A05F (32 volumes) of volumes model 9. This range of address can be defined in LCU 0. What could be an issue is physical disk drive size. If we have HDD´s of 73GB less volumes can be defined in LCU, if we have HDD´s of 300GB (our case) 256 volumes can be defined. Other thing to keep in mind is that even with 16 HDD´s, internally DS6800 split in 2 loops of 8 disks each, missing 1 for parity (raid 5) and 1 for spare, so from 8 x 300GB (2.4TB raw capacity) we have only 1.8TB available for data usage in each loop (assuming a full DS6800). I hope help. If you need more info please contact me off list. Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil Em 05/03/2013 08:25, Mike Schwab escreveu: 3390 is a device type. -1, -2, -3, -9, -27, -54, etc are different sizes of 3390s. On Tue, Mar 5, 2013 at 12:21 AM, Miklos Szigetvari miklos.szigetv...@isis-papyrus.com wrote: Hi Thank you very much, I'm just wandering, but the technician says, every device type needs a separate control unit Try to look after this again, but thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
An information...
I known that z/OS.e is an special offer from IBM for new workloads and bla bla bla... but my question is about possibility to run COBOL programs under it or better compile some Cobol programs under z/OS.e. This is a legacy system (z/OS.e 1.8) and we need to do some maintenance in programs only. -- Carlos Bodra IBM Certified Specialist System z Sao Paulo - Brazil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
