Re: SMF RECORD TYPE : HELP
If you have IBM DFSORT, you can probably use ICEOOL to read SMF Data and produce a report http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.iceg200/ice.htm http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.icea100/ice2ca_Example_127.htm However, MXG or MICS will be able to provide easier reporting process on SMF Data. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of John Dawes > Sent: Friday, November 04, 2016 4:35 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMF RECORD TYPE : HELP > > Daniel, > > I would like to try out your suggestion. Would you have an example of the > FDRABR step? Also, would it support SMF as an input file? > > > On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc- > requ...@listserv.ua.edu> wrote: > > Subject: Re: SMF RECORD TYPE : HELP > To: IBM-MAIN@LISTSERV.UA.EDU > Received: Thursday, 3 November, 2016, 9:20 AM > > OK, add an SDSF step > before your FDR dump step, then one after your FDR dump step. Rerun the > job. > > //COMMAND1 EXEC PGM=ISFAFD > //ISFOUT DD SYSOUT=* > //ISFIN DD * > > /D ALLOC,,devaddr,1 > /* > //* > //FDRABR step here > //FDR > //* > //COMMAND2 EXEC PGM=ISFAFD > //ISFOUT DD SYSOUT=* > //ISFIN DD * > > /D ALLOC,,devaddr,1 > /* > > > > ;-D an > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of John Dawes > Sent: Thursday, > November 03, 2016 8:23 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMF RECORD TYPE : HELP > > Yes, I tried that. However, > when I issued the command it was too late (3 minutes after the job > abend). This is why I thought by reading SMF records would have some info > on the volume. > > > ---- > On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc- > requ...@listserv.ua.edu> > wrote: > > Subject: Re: SMF > RECORD TYPE : HELP > To: IBM-MAIN@LISTSERV.UA.EDU > Received: Thursday, 3 November, 2016, 7:56 AM > > Have you tried the > alloc > command from the console or SDSF? > > D U,,ALLOC,devaddr,1 > > Thank You > > > > ;-D an > > > > > > -Original Message- > From: IBM > Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of > John Dawes > Sent: Thursday, > November 03, 2016 7:53 AM > To: > IBM-MAIN@LISTSERV.UA.EDU > Subject: SMF RECORD TYPE : HELP > > G'Day, > > > Could someone suggest how I could obtain information about a certain DASD > volume? I am trying to trouble shoot a problem of a job failure when > attempting to copy a volume using the following parms. > > COPY INDYNAM(SYS012) > OUTDYNAM(BCD012) > CANCELERROR - > > PURGE ALLEXCP > ALLDATA(*) OPT(4) ADMIN FCNOCOPY > - > > I get the following > message: > > > ADR306E > (043)-SBRTN(01), UNABLE TO COPY THE > VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED > > I am trying to > find out what > resource was using the volume > at that time. I thought that SMF would be a solution however I don't see a > SMF record type for DASD. > > Any > > suggestions would be very welcome. > > Thanks. > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
That was my mistake. I was in a hurry and read the message as coming from FDRABR, rather than ICKDSF. Do you have FDRABR at your site? You should be able to add those steps to your current dump job and get the same results. Dan -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Friday, November 04, 2016 7:35 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP Daniel, I would like to try out your suggestion. Would you have an example of the FDRABR step? Also, would it support SMF as an input file? On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 9:20 AM OK, add an SDSF step before your FDR dump step, then one after your FDR dump step. Rerun the job. //COMMAND1 EXEC PGM=ISFAFD //ISFOUT DD SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* //* //FDRABR step here //FDR //* //COMMAND2 EXEC PGM=ISFAFD //ISFOUT DD SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
Daniel, I would like to try out your suggestion. Would you have an example of the FDRABR step? Also, would it support SMF as an input file? On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 9:20 AM OK, add an SDSF step before your FDR dump step, then one after your FDR dump step. Rerun the job. //COMMAND1 EXEC PGM=ISFAFD //ISFOUT DD SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* //* //FDRABR step here //FDR //* //COMMAND2 EXEC PGM=ISFAFD //ISFOUT DD SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
That was the first thing I tried. However it was too late because I issued 3 minutes later after the job abended. The device showed that no resource had aan enque on it.. On Thu, 3/11/16, Ronald Hawkins <ronjhawk...@sbcglobal.net> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:51 PM John, Have you tried D U ... ALLOC COMMAND? Ron Sent from Yahoo Mail on Android On Thu, Nov 3, 2016 at 4:52, John Dawes<00ff0e22811f-dmarc-requ...@listserv.ua.edu> wrote: G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
John, Have you tried D U ... ALLOC COMMAND? Ron Sent from Yahoo Mail on Android On Thu, Nov 3, 2016 at 4:52, John Dawes<00ff0e22811f-dmarc-requ...@listserv.ua.edu> wrote: G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
We ar e running RELEASE z/OS 02.01.00. The target volume (DASD) is for Flashcopy only. We have had this type of problem intermittently for other volumes as well. On Thu, 3/11/16, Lizette Koehler <stars...@mindspring.com> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 9:06 AM What version of z/OS are you running? So, I might try the following If you have an automation tool, this works easier Start the displays when the JOB enters the system 1) D GRS,DEV= This can be imbedded in the JCL with the // command JCL Card or issued as an MVS Command 2) D U,,ALLOC,,1 This can be imbedded in the JCL with the // command JCL Card or issued as an MVS Command 3) Add PARM='UTILMSG=YES' 4) Review the volume to see what is on it. Any catalogs, DB2 Tables, zFS or HFS files that might be enqueued? 5) Is BCD012 a tape or disk? Is it purely a flashcopy volume? Or do you allow it to be used by other activities? 6) Is this first time this job has had an issue or is this a reoccurring event? 7) As others have stated, RMF Panels could help Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of John Dawes > Sent: Thursday, November 03, 2016 4:53 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: SMF RECORD TYPE : HELP > > G'Day, > > Could someone suggest how I could obtain information about a certain DASD > volume? I am trying to trouble shoot a problem of a job failure when > attempting to copy a volume using the following parms. > > COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - > PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - > > I get the following message: > > ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME > BCD012 IS IN USE. TASK IS TERMINATED > > I am trying to find out what resource was using the volume at that time. I > thought that SMF would be a solution however I don't see a SMF record type for > DASD. > > Any suggestions would be very welcome. > > Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
Lizette, I checked with our Capacity Performance group and they informed me that the data is retained for a day. Thanks for the info. On Thu, 3/11/16, Lizette Koehler <stars...@mindspring.com> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 9:15 AM If they set up the RMF ISPF application in your environment - Most shops use a REXX/CLIST to access it. In my shop we created RMFIII as the REXX/CLIST. However, you shop might be different. You need to have datasets that use SERBxxx allocated to your TSO Session. See if your sysprog can help. This link shows the RMF libraries that are allocated (dynamically or hard coded in the TSO Logon Proc) to your TSO Session to use the RMF Panels http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.erbb200/exec.htm Unless the libraries are allocated, you cannot use the RMF Panels. The second issue is how large are the RMF monitor VSAM Files? If they are too small, then the option will not be able to retain sufficient data to do past analysis. If you have SAS/MXG or SAS/MICS, then you can run the dasd reports for RMF. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of John Dawes > Sent: Thursday, November 03, 2016 5:36 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMF RECORD TYPE : HELP > > Thanks for the suggestion. I am not familiar on how to use. I sure would > like to try. > > Is it interactive via ISPF? > > > On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: > > Subject: Re: SMF RECORD TYPE : HELP > To: IBM-MAIN@LISTSERV.UA.EDU > Received: Thursday, 3 November, 2016, 8:32 AM > > How about RMF > panels 3 - 2 - 5 ? > Put in > jobname - then set time for when job was running > > Jay Campbell > MSSD – IZSSB – IOSSS > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On > Behalf Of John Dawes > Sent: Thursday, > November 03, 2016 8:23 AM > To: IBM-MAIN@listserv.ua.edu > Subject: Re: SMF RECORD TYPE : HELP > > Yes, I tried that. However, > when I issued the command it was too late (3 minutes after the job > abend). This is why I thought by reading SMF records would have some info > on the volume. > > > -------- > On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc- > requ...@listserv.ua.edu> > wrote: > > Subject: Re: SMF > RECORD TYPE : HELP > To: IBM-MAIN@LISTSERV.UA.EDU > Received: Thursday, 3 November, 2016, 7:56 AM > > Have you tried the > alloc > command from the console or SDSF? > > D U,,ALLOC,devaddr,1 > > Thank You > > > > ;-D an > > > > > > -Original Message- > From: IBM > Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of > John Dawes > Sent: Thursday, > November 03, 2016 7:53 AM > To: > IBM-MAIN@LISTSERV.UA.EDU > Subject: SMF RECORD TYPE : HELP > > G'Day, > > > Could someone suggest how I could obtain information about a certain DASD > volume? I am trying to trouble shoot a problem of a job failure when > attempting to copy a volume using the following parms. > > COPY INDYNAM(SYS012) > OUTDYNAM(BCD012) > CANCELERROR - > > PURGE ALLEXCP > ALLDATA(*) OPT(4) ADMIN FCNOCOPY > - > > I get the following > message: > > > ADR306E > (043)-SBRTN(01), UNABLE TO COPY THE > VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED > > I am trying to > find out what > resource was using the volume > at that time. I thought that SMF would be a solution however I don't see a > SMF record type for DASD. > > Any > > suggestions would be very welcome. > > Thanks. > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
OK, add an SDSF step before your FDR dump step, then one after your FDR dump step. Rerun the job. //COMMAND1 EXEC PGM=ISFAFD //ISFOUT DD SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* //* //FDRABR step here //FDR //* //COMMAND2 EXEC PGM=ISFAFD //ISFOUT DD SYSOUT=* //ISFIN DD * /D ALLOC,,devaddr,1 /* ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
If they set up the RMF ISPF application in your environment - Most shops use a REXX/CLIST to access it. In my shop we created RMFIII as the REXX/CLIST. However, you shop might be different. You need to have datasets that use SERBxxx allocated to your TSO Session. See if your sysprog can help. This link shows the RMF libraries that are allocated (dynamically or hard coded in the TSO Logon Proc) to your TSO Session to use the RMF Panels http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.erbb200/exec.htm Unless the libraries are allocated, you cannot use the RMF Panels. The second issue is how large are the RMF monitor VSAM Files? If they are too small, then the option will not be able to retain sufficient data to do past analysis. If you have SAS/MXG or SAS/MICS, then you can run the dasd reports for RMF. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of John Dawes > Sent: Thursday, November 03, 2016 5:36 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMF RECORD TYPE : HELP > > Thanks for the suggestion. I am not familiar on how to use. I sure would > like to try. > > Is it interactive via ISPF? > > > On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: > > Subject: Re: SMF RECORD TYPE : HELP > To: IBM-MAIN@LISTSERV.UA.EDU > Received: Thursday, 3 November, 2016, 8:32 AM > > How about RMF > panels 3 - 2 - 5 ? > Put in > jobname - then set time for when job was running > > Jay Campbell > MSSD – IZSSB – IOSSS > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On > Behalf Of John Dawes > Sent: Thursday, > November 03, 2016 8:23 AM > To: IBM-MAIN@listserv.ua.edu > Subject: Re: SMF RECORD TYPE : HELP > > Yes, I tried that. However, > when I issued the command it was too late (3 minutes after the job > abend). This is why I thought by reading SMF records would have some info > on the volume. > > > -------- > On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc- > requ...@listserv.ua.edu> > wrote: > > Subject: Re: SMF > RECORD TYPE : HELP > To: IBM-MAIN@LISTSERV.UA.EDU > Received: Thursday, 3 November, 2016, 7:56 AM > > Have you tried the > alloc > command from the console or SDSF? > > D U,,ALLOC,devaddr,1 > > Thank You > > > > ;-D an > > > > > > -Original Message- > From: IBM > Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of > John Dawes > Sent: Thursday, > November 03, 2016 7:53 AM > To: > IBM-MAIN@LISTSERV.UA.EDU > Subject: SMF RECORD TYPE : HELP > > G'Day, > > > Could someone suggest how I could obtain information about a certain DASD > volume? I am trying to trouble shoot a problem of a job failure when > attempting to copy a volume using the following parms. > > COPY INDYNAM(SYS012) > OUTDYNAM(BCD012) > CANCELERROR - > > PURGE ALLEXCP > ALLDATA(*) OPT(4) ADMIN FCNOCOPY > - > > I get the following > message: > > > ADR306E > (043)-SBRTN(01), UNABLE TO COPY THE > VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED > > I am trying to > find out what > resource was using the volume > at that time. I thought that SMF would be a solution however I don't see a > SMF record type for DASD. > > Any > > suggestions would be very welcome. > > Thanks. > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
What version of z/OS are you running? So, I might try the following If you have an automation tool, this works easier Start the displays when the JOB enters the system 1) D GRS,DEV= This can be imbedded in the JCL with the // command JCL Card or issued as an MVS Command 2) D U,,ALLOC,,1 This can be imbedded in the JCL with the // command JCL Card or issued as an MVS Command 3) Add PARM='UTILMSG=YES' 4) Review the volume to see what is on it. Any catalogs, DB2 Tables, zFS or HFS files that might be enqueued? 5) Is BCD012 a tape or disk? Is it purely a flashcopy volume? Or do you allow it to be used by other activities? 6) Is this first time this job has had an issue or is this a reoccurring event? 7) As others have stated, RMF Panels could help Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of John Dawes > Sent: Thursday, November 03, 2016 4:53 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: SMF RECORD TYPE : HELP > > G'Day, > > Could someone suggest how I could obtain information about a certain DASD > volume? I am trying to trouble shoot a problem of a job failure when > attempting to copy a volume using the following parms. > > COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - > PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - > > I get the following message: > > ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME > BCD012 IS IN USE. TASK IS TERMINATED > > I am trying to find out what resource was using the volume at that time. I > thought that SMF would be a solution however I don't see a SMF record type for > DASD. > > Any suggestions would be very welcome. > > Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
SMF type 30 records have a section in them on DASD. Recorded by unit number in the EXCP section. Chris Blaicher Technical Architect Mainframe Development Syncsort Incorporated 50 Tice Boulevard, Woodcliff Lake, NJ 07677 P: 201-930-8234 | M: 512-627-3803 E: cblaic...@syncsort.com www.syncsort.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Campbell Jay Sent: Thursday, November 3, 2016 8:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMF RECORD TYPE : HELP SPOOL shouldn't matter. Must have had RMFGAT running at the time. No idea how long your RMF repository holds data. Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:40 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP I was able to access the panel however the job is no longer in the spool because it has been sent to $AVRS. On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 8:32 AM How about RMF panels 3 - 2 - 5 ? Put in jobname - then set time for when job was running Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ATTENTION: - The information contained in this message (including any files transmitted with this message) may contain proprietary, trade secret or other confidential and/or legally privileged information. Any pricing information contained in this message or in any files transmitted with this message is always confidential and cannot be shared with any third parties without prior written approval from Syncsort. This message is intended to be read only by the individual or entity to whom it
Re: SMF RECORD TYPE : HELP
SPOOL shouldn't matter. Must have had RMFGAT running at the time. No idea how long your RMF repository holds data. Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:40 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP I was able to access the panel however the job is no longer in the spool because it has been sent to $AVRS. On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 8:32 AM How about RMF panels 3 - 2 - 5 ? Put in jobname - then set time for when job was running Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
I was able to access the panel however the job is no longer in the spool because it has been sent to $AVRS. On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 8:32 AM How about RMF panels 3 - 2 - 5 ? Put in jobname - then set time for when job was running Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
Our setup is Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:36 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Thanks for the suggestion. I am not familiar on how to use. I sure would like to try. Is it interactive via ISPF? On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 8:32 AM How about RMF panels 3 - 2 - 5 ? Put in jobname - then set time for when job was running Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
Thanks for the suggestion. I am not familiar on how to use. I sure would like to try. Is it interactive via ISPF? On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 8:32 AM How about RMF panels 3 - 2 - 5 ? Put in jobname - then set time for when job was running Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
How about RMF panels 3 - 2 - 5 ? Put in jobname - then set time for when job was running Jay Campbell MSSD – IZSSB – IOSSS -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 8:23 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: SMF RECORD TYPE : HELP Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
Yes, I tried that. However, when I issued the command it was too late (3 minutes after the job abend). This is why I thought by reading SMF records would have some info on the volume. On Thu, 3/11/16, Blake, Daniel J [CTR] <00f1be92566d-dmarc-requ...@listserv.ua.edu> wrote: Subject: Re: SMF RECORD TYPE : HELP To: IBM-MAIN@LISTSERV.UA.EDU Received: Thursday, 3 November, 2016, 7:56 AM Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SMF RECORD TYPE : HELP
Have you tried the alloc command from the console or SDSF? D U,,ALLOC,devaddr,1 Thank You ;-D an -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John Dawes Sent: Thursday, November 03, 2016 7:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SMF RECORD TYPE : HELP G'Day, Could someone suggest how I could obtain information about a certain DASD volume? I am trying to trouble shoot a problem of a job failure when attempting to copy a volume using the following parms. COPY INDYNAM(SYS012) OUTDYNAM(BCD012) CANCELERROR - PURGE ALLEXCP ALLDATA(*) OPT(4) ADMIN FCNOCOPY - I get the following message: ADR306E (043)-SBRTN(01), UNABLE TO COPY THE VOLUME BECAUSE OUTPUT VOLUME BCD012 IS IN USE. TASK IS TERMINATED I am trying to find out what resource was using the volume at that time. I thought that SMF would be a solution however I don't see a SMF record type for DASD. Any suggestions would be very welcome. Thanks. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
