Re: MERRY CRISTMAS

[M.W.Foscue]

That 125ºF is the "take out" (of oven) temp.  When your thermometer alarm signals the center of the meat is 125ºF you shut oven off and remove the roast.Its temperature will go up about another 5º at its "peak" and then slowly begin to cool. (Of course in MN, it will do so RAPIDLY - esp when Tim doesn't run his heat!)  LoLHappy New Year to you and your'uns.Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 25, 2020 6:53 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: MERRY CRISTMAS

Sorry Mac I like the cow to stop moving and at the temp. you mentioned lolKind Regards,Timothy J. ZieglerOn Thu, Dec 24, 2020 at 10:58 PM M.W.Foscue  wrote:Ok Tim - since you brought it up.I was contemplating replying back to Brigitte:"I'm thinking more along the menu of  "British fare" - Standing Rib Roast/Prime Rib Roast!  Cooked only to rare-medium rare! (about 125º F internal).Along with some pan-roasted veggies (brussel sprouts, carrots, parsnips, rutabaga, and potatoes)  YUM!"Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 24, 2020 11:24 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: MERRY CHRISTMAS

Ham?Merry Christmas to you as wellKind Regards,Timothy J. ZieglerOn Thu, Dec 24, 2020 at 3:50 PM Brigitte Graham  wrote:Hi LOM Team,Hope you all have a Christmas that is filled with love, laughter and ...Turkey!Legacy WidowOn Thu, 24 Dec 2020 at 19:30,  wrote:Well its Christmas morning here down under so merry Christmas to all you guys and girls in legacy landFrom Australia Bill



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1971973195.6636.1609226804917%40wamui-gaston.atl.sa.earthlink.net.

Re: legacy drive motor

['Curt George' via Legacy Ornamental Mills]

 Holey Cow is right!  Its Highway robbery!  Look at this.  
https://www.amazon.com/s?k=90+volt+dc+GEAR+motor=nb_sb_noss_2Amazon sells a 
number of controllers and motors that would work with the Legacy, prices ranges 
very ? Yes they can be pricey... but I can see a few with in the price range 
you are looks for.  $200.-$300.00
Bill I know Amazon sells in AUZ. check them out.  
C.A.G.
On Monday, December 28, 2020, 03:08:57 PM EST, bulke...@mmnet.com.au 
 wrote:  
 
 
Anyone need a drive motor for their legacy?

https://www.ebay.com/itm/114598076015?ul_noapp=true

  

Bill


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001901d6dd55%243e65b5a0%24bb3120e0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/937809114.3199672.1609221193118%40mail.yahoo.com.

RE: MERRY CHRISTMAS

[M.W.Foscue]

Bill,Good one - you got us back.  Although, I think we both ought to start recruiting French drivers for the tasks.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Dec 26, 2020 11:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: MERRY CHRISTMAS

MacFunny we do that with an American in a truck to check for quick sand depths in the deserts of the outback we send one in after the other till they stop sinking then we know its safe to dive over the top lol   From: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Sunday, 27 December 2020 3:03 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: MERRY CHRISTMAS Bill,I get an Aussie to drive his truck out on it - and if the truck falls thru, I  wait two more weeks had have him try it again.  I have to wait two weeks because that's how long it takes him to get the truck out and restored back to "operating condition".   And I keep doing that until his truck stays put.And, if all else fails, I get Tim Z to tell be when it's "safe". (See his input.)Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 26, 2020 2:55 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS Very interesting mac one question how do you know the ice is safe (thick enough) to drive on BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Saturday, 26 December 2020 6:14 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: MERRY CHRISTMAS I have a friend that has the steel frame (w/axle & wheels) for the specially built trailer they use - on which to construct an Ice Fishing "shed".Two things make it very UNIQUE:1.  The axle & wheel assembly is hydraulically lowered to drive it on the highway.  When you get the trailer/shed unit out onto your ice fishing spot, you release the hydraulic pressure and the axle & wheels retract up into the trailer frame - effectively lowering the steel trailer frame down onto the ice.2.  The steel frame is designed such that there is one fair sized rectangular area that has no steel frame or reinforcing members in it.  That area is about 36" by ~60".   Also, the tongue on these trailers is either removable or foldable - to get it out of the way. Once the "Ice Fishing House" is lowered onto the ice and you get your heater going, you bore your holes in the ice within that open, unobstructed rectangle.  After you get the opening in the ice, it takes you skimming and occasionally chipping the ice that tries to grow back in the hole.  Of course if you go home for the night, you'll have to drill & chip all over again the next day. I hope this helps.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Dec 26, 2020 1:42 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: MERRY CHRISTMAS I know nothing of ice fishing for obvious reasons . so how do you tell the ice is thick enough to walk or drive on to go ice fishingAnd once you got the hole cut how do you stop it refreezing over while your fishing basically please give me an ice fishing lesson 101 BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 3:17 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CHRISTMAS Hey Mac Last email for the night. I am almost ready for ice fishing yes indeed. I gave my one Son Ice fishing equipment for Christmas and that could only mean one thing right?  You guessed it he wants me to take him. Better let the ice get a bit thicker though. Have a blessed night Mac. Glad you got a good sense of humour.  Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:LoL!Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell in love with them.The first one brought to the US (as the "story"/history goes) was actually brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin to one of our national officials giving a Bald Eagle to a departing dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim Z. - and take the cats with you.  Make them catfish!  LoL!)Mac-Original Message- From: Tim Ziegler Sent: Dec 25, 2020 7:25 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CHRISTMAS So your Royal Highness where does that put you my friend?   LOL Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue  wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Couldn't ask for a better dog.  We are "sold" on the Akita breed.  They originated in Japan - where only the Emperor & "royalty" 

Re: MERRY CRISTMAS - Ice Fishing

[M.W.Foscue]

So, no Muskie, Pike, Walleye, trout, carp, catfish, sturgeon?  Are any of the aforementioned in the lakes - and just hibernate or just don't go for bait?What about Bass?  Any in the lakes?  Large mouth/small mouth?Thanks.Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 28, 2020 10:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: MERRY CRISTMAS - Ice Fishing

Hi Mac,Typically we are after Panfish. So Crappie and Sunnys. We do keep them if big enough. Usually a very sophisticated measuring device is involved. If they are as big as my hand we typically keep them. no kidding. I believe 10 crappie and 20 sunfish per person. I fillet them then remove the scales and skin from the fillet. My wife frys the fillets in flour and butter. Kind Regards,Timothy J. ZieglerOn Mon, Dec 28, 2020 at 8:50 PM M.W.Foscue  wrote:Tim,Thanks for the technical "Ice Fishing 101".What kinds of fish do you catch this time of year at the bottom of the lake?How big are they?Do you catch & release?  Or take home?Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 26, 2020 7:13 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: MERRY CRISTMAS

Hey Bill, and others that don't get to enjoy the good things in life. Fishing 101I actually take the very scientific approach to fishing and when it's safe.  I listen to the ice thickness reports and once I see plenty of others out fishing I get brave and go. lolI'm not big about standing in the cold either so I have a potable 6 X 8 portable (folding) Clam brand fish house.I have gas power auger, to cut the holes and once we've drilled the first hole or so we clean out the ice fragmentswith a ice skimmer or scoop. Here is where I can technically measure the ice. I have an extremely accurate measuring device to get the exact thicknessof the Ice. My handle for my ice skimmer. If I cant reach the bottom edge of the ice with the skimmer I feel pretty confident the ice is thick enough to support my vehicle and us along with our equipment. We do walk out from time to time if we start fishing early enough in the season and the lakes are not so bigthat you can't see across the lake. So once the first hole is drilled we set up the house and pull it over the first hole mark the rest fo the hole with the auger, move the house off, drill the rest of the hole, clean them out with skimmer and pull the house the back overthe holes and now we are ready. Then I light my SunFlower heater set that up and commence setting up the jig sticks (ice fishing rods).find the depth of the water with a another super scientific measuring device a lead weight with a clip on it to clamp on thehook I'm using. Send it down to the bottom of the lake then pull it up using the spread of my arms to measure what we refer to as arm lenghts. Most people know their height and your arm lengths from tip to tip shouldbe close to your height and if count arm lengths you now know how deep the water is there. Now we slide our bobbler up approx 2 feet  so your hook dangles about 2 feet from the bottom, bait the hooks with either minnow's of wax worms. Let the hook and line into water and comence fishing. Jigging from time to time to entice the fish to bit your hook. Now pour your coffee, grab your chips or snacks and enjoy. Fishing 101 explained in a short form lol.Kind Regards,Timothy J. ZieglerOn Sat, Dec 26, 2020 at 12:42 AM  wrote:I know nothing of ice fishing for obvious reasons . so how do you tell the ice is thick enough to walk or drive on to go ice fishingAnd once you got the hole cut how do you stop it refreezing over while your fishing basically please give me an ice fishing lesson 101 Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 3:17 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS Hey Mac Last email for the night. I am almost ready for ice fishing yes indeed. I gave my one Son Ice fishing equipment for Christmas and that could only mean one thing right?  You guessed it he wants me to take him. Better let the ice get a bit thicker though. Have a blessed night Mac. Glad you got a good sense of humour.  Kind Regards, Timothy J. ZieglerOn Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:LoL!Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell in love with them.The first one brought to the US (as the "story"/history goes) was actually brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin to one of our national officials giving a Bald Eagle to a departing dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing 

Re: MERRY CRISTMAS - Ice Fishing

[Tim Ziegler]

Hi Mac,

Typically we are after Panfish. So Crappie and Sunnys.
We do keep them if big enough. Usually a very sophisticated measuring
device is involved.
If they are as big as my hand we typically keep them. no kidding.
I believe 10 crappie and 20 sunfish per person.
I fillet them then remove the scales and skin from the fillet.

My wife frys the fillets in flour and butter.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 8:50 PM M.W.Foscue  wrote:

> Tim,
> Thanks for the technical "Ice Fishing 101".
> What kinds of fish do you catch this time of year at the bottom of the
> lake?
> How big are they?
> Do you catch & release?  Or take home?
> Mac
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Dec 26, 2020 7:13 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: MERRY CRISTMAS
>
> Hey Bill, and others that don't get to enjoy the good things in life.
>
> Fishing 101
>
> I actually take the very scientific approach to fishing and when it's
> safe.
>
> I listen to the ice thickness reports and once I see plenty of others out
> fishing I get brave and go. lol
>
> I'm not big about standing in the cold either so I have a potable 6 X 8
> portable (folding) Clam brand fish house.
>
> I have gas power auger, to cut the holes and once we've drilled the first
> hole or so we clean out the ice fragments
> with a ice skimmer or scoop.
>
> Here is where I can technically measure the ice. I have an
> extremely accurate measuring device to get the exact thickness
> of the Ice. My handle for my ice skimmer. If I cant reach the bottom edge
> of the ice with the skimmer I feel pretty confident
> the ice is thick enough to support my vehicle and us along with our
> equipment.
>
> We do walk out from time to time if we start fishing early enough in the
> season and the lakes are not so big
> that you can't see across the lake.
>
> So once the first hole is drilled we set up the house and pull it over the
> first hole mark the rest fo the hole with the
> auger, move the house off, drill the rest of the hole, clean them out with
> skimmer and pull the house the back over
> the holes and now we are ready.
>
> Then I light my SunFlower heater set that up and commence setting up the
> jig sticks (ice fishing rods).
>
> find the depth of the water with a another super scientific measuring
> device a lead weight with a clip on it to clamp on the
> hook I'm using. Send it down to the bottom of the lake then pull it up
> using the spread of my arms to
> measure what we refer to as arm lenghts. Most people know their height and
> your arm lengths from tip to tip should
> be close to your height and if count arm lengths you now know how deep the
> water is there.
>
>  Now we slide our bobbler up approx 2 feet  so your hook dangles about 2
> feet from the bottom, bait the hooks with either minnow's of wax worms.
> Let the hook and line into water and comence fishing. Jigging from time to
> time to entice the fish to bit your hook.
>
> Now pour your coffee, grab your chips or snacks and enjoy.
>
> Fishing 101 explained in a short form lol.
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
>
> On Sat, Dec 26, 2020 at 12:42 AM  wrote:
>
>> I know nothing of ice fishing for obvious reasons . so how do you tell
>> the ice is thick enough to walk or drive on to go ice fishing
>>
>> And once you got the hole cut how do you stop it refreezing over while
>> your fishing basically please give me an ice fishing lesson 101
>>
>>
>>
>> Bill
>> --
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Saturday, 26 December 2020 3:17 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: MERRY CRISTMAS
>>
>>
>>
>> Hey Mac
>>
>> Last email for the night. I am almost ready for ice fishing yes indeed. I
>> gave my one Son Ice fishing equipment for Christmas and that
>>
>> could only mean one thing right?  You guessed it he wants me to take him.
>> Better let the ice get a bit thicker though.
>>
>> Have a blessed night Mac. Glad you got a good sense of humour.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>> --
>>
>> On Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue 
>> wrote:
>>
>> LoL!
>>
>> Ha! - they eventually let us "commoners" own them.  After WWII, the GI's
>> fell in love with them.
>>
>> The first one brought to the US (as the "story"/history goes) was
>> actually brought by Helen Keller.  She was in Japan on a cultural exchange
>> mission(?).  The Japanese Minister of Culture(?) gave her one as a
>> departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin
>> to one of our national officials giving a Bald Eagle to a departing
>> dignitary.  The Akita is still HIGHLY regarded in Japan 

Re: MERRY CRISTMAS - Ice Fishing

[M.W.Foscue]

Tim,Thanks for the technical "Ice Fishing 101".What kinds of fish do you catch this time of year at the bottom of the lake?How big are they?Do you catch & release?  Or take home?Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 26, 2020 7:13 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: MERRY CRISTMAS

Hey Bill, and others that don't get to enjoy the good things in life. Fishing 101I actually take the very scientific approach to fishing and when it's safe.  I listen to the ice thickness reports and once I see plenty of others out fishing I get brave and go. lolI'm not big about standing in the cold either so I have a potable 6 X 8 portable (folding) Clam brand fish house.I have gas power auger, to cut the holes and once we've drilled the first hole or so we clean out the ice fragmentswith a ice skimmer or scoop. Here is where I can technically measure the ice. I have an extremely accurate measuring device to get the exact thicknessof the Ice. My handle for my ice skimmer. If I cant reach the bottom edge of the ice with the skimmer I feel pretty confident the ice is thick enough to support my vehicle and us along with our equipment. We do walk out from time to time if we start fishing early enough in the season and the lakes are not so bigthat you can't see across the lake. So once the first hole is drilled we set up the house and pull it over the first hole mark the rest fo the hole with the auger, move the house off, drill the rest of the hole, clean them out with skimmer and pull the house the back overthe holes and now we are ready. Then I light my SunFlower heater set that up and commence setting up the jig sticks (ice fishing rods).find the depth of the water with a another super scientific measuring device a lead weight with a clip on it to clamp on thehook I'm using. Send it down to the bottom of the lake then pull it up using the spread of my arms to measure what we refer to as arm lenghts. Most people know their height and your arm lengths from tip to tip shouldbe close to your height and if count arm lengths you now know how deep the water is there. Now we slide our bobbler up approx 2 feet  so your hook dangles about 2 feet from the bottom, bait the hooks with either minnow's of wax worms. Let the hook and line into water and comence fishing. Jigging from time to time to entice the fish to bit your hook. Now pour your coffee, grab your chips or snacks and enjoy. Fishing 101 explained in a short form lol.Kind Regards,Timothy J. ZieglerOn Sat, Dec 26, 2020 at 12:42 AM  wrote:I know nothing of ice fishing for obvious reasons . so how do you tell the ice is thick enough to walk or drive on to go ice fishingAnd once you got the hole cut how do you stop it refreezing over while your fishing basically please give me an ice fishing lesson 101 Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Saturday, 26 December 2020 3:17 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: MERRY CRISTMAS Hey Mac Last email for the night. I am almost ready for ice fishing yes indeed. I gave my one Son Ice fishing equipment for Christmas and that could only mean one thing right?  You guessed it he wants me to take him. Better let the ice get a bit thicker though. Have a blessed night Mac. Glad you got a good sense of humour.  Kind Regards, Timothy J. ZieglerOn Fri, Dec 25, 2020 at 9:55 PM M.W.Foscue  wrote:LoL!Ha! - they eventually let us "commoners" own them.  After WWII, the GI's fell in love with them.The first one brought to the US (as the "story"/history goes) was actually brought by Helen Keller.  She was in Japan on a cultural exchange mission(?).  The Japanese Minister of Culture(?) gave her one as a departure gift (NOT a "seeing eye dog" kind of gift.).  It was sort of akin to one of our national officials giving a Bald Eagle to a departing dignitary.  The Akita is still HIGHLY regarded in Japan - for good reason as Ron Taylor mentioned.Here's wishing all ya'll a Wonderful fun-filled Weekend!  (Go ice fishing Tim Z. - and take the cats with you.  Make them catfish!  LoL!)Mac-Original Message- From: Tim Ziegler Sent: Dec 25, 2020 7:25 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: MERRY CRISTMAS So your Royal Highness where does that put you my friend?   LOL Kind Regards, Timothy J. Ziegler On Fri, Dec 25, 2020 at 3:39 PM M.W.Foscue  wrote:Thanks, Bill.She's 120 lbs - and about 28" (72cm) at her front shoulder).Couldn't ask for a better dog.  We are "sold" on the Akita breed.  They originated in Japan - where only the Emperor & "royalty" could own them.  Bred to hunt bear & deer in their northern prefect (Akita Prefect).Very loyal and a good "guard dog" - even w/ children.Look up the movie about an Akita - "Hachi - A Dog's Tale" - staring Richard Gere.Watch it with your kids & grandchildren.  Excellent movie for that 

Re: Thread cutting router bit

[Tim Ziegler]

you mean i have to start my boiler again this year. I thought... if I
didn't make any extra heat anywhere I'd get ice faster for fishing?

Yea I got a lot of learning to do on the LOM. Played again tonight and made
another rosette. Bill will be proud lol.

So day I'm just going to play until. my wife tells me enough lol
I do have a production job coming in this week for my LOM so it can earn
its keep for the next 100 years.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 7:23 PM M.W.Foscue  wrote:

> Tim,
> It must be those C-O-L-D temps you get up there - s-l-ow-i-n-g the video
> down to 16 seconds/frame vs 16 - 32 frames/second in warmer climes.  LoL
>
> No - you have not experienced internet slowdown that bad.  The "video"
> seemds to be a video of a "slide show" Bill put together.
>
> Your ? re: advancing the cutter is one I had.   I think he actually
> advances the piece being "threaded" - and rotates it at the pitch he
> chose.  And to do that, either the cutter of the piece being threaded has
> to be offset by the radius of the desired diameter of the threads (for
> internal ones).  Something similar for external threads.
>
> Turn the heat on/up in your home and the video will play faster!
> Mac
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Dec 28, 2020 6:42 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Thread cutting router bit
>
> Am I the only one that see's that as pictures? Is it not playing as a
> video on my end?
> So how did you advance into the part Bill when you run your threads?
>
> by the way where has Joe been again?
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Mon, Dec 28, 2020 at 5:02 PM M.W.Foscue  wrote:
>
>> Thanks Bill & Mike,
>> I watched the full length "video" of Bill's.  I saw how he set up his
>> equipment to 'thread the outside of the "bolt" and then the "Rube Goldberg"
>> setup to use the side-cutting thread cutter by Magnate to thread the inside
>> of the nut.
>> It is my thinking  that very few Group members have a setup such that we
>> can make that Magnate side cutter put threads on a wooden piece to create
>> either a bolt or a nut.  Several of you guys are GENIUSES when it comes to
>> "making it work"! (Mike P; Tim K; Bill B; Curtis; and, yes - EVEN NY Joe!
>> (LoL! Actually ESPECIALLY NY Joe!!!) - among several others).
>> Thanks for your input.
>> Mac
>> --
>>
>> -Original Message-
>> From: "Okla Mike (Liltwisted)"
>> Sent: Dec 28, 2020 5:34 PM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: Thread cutting router bit
>>
>> Yes, Watch the video here is a clip from it
>> --
>>
>> On 12/28/2020 12:38 PM, M.W.Foscue wrote:
>>
>> Mike,
>> Tim (I think) & I are referring to if you use the "Thread-cutting"
>> Magnate bit that's on eBay.  Not the bit Bill used in his video on the
>> screw shank.  That bit was essentially a V-bit.  The eBay bit is
>> side-cutting.
>> Mac
>> --
>>
>> -Original Message-
>> From: "Okla Mike (Liltwisted)"
>> Sent: Dec 28, 2020 1:06 PM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: Thread cutting router bit
>>
>> Attach the router to the carriage and it will be set on the gear pitch of
>> your choice.
>> --
>>
>> On 12/28/2020 11:37 AM, Tim Ziegler wrote:
>>
>> thanks Mike
>>
>> How is it fed then? to keep the bit on track?
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> --
>> On Mon, Dec 28, 2020 at 11:07 AM Okla Mike (Liltwisted) <
>> legacym...@iglide.net> wrote:
>>
>>> Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk
>>> On 12/28/2020 10:35 AM, Tim Ziegler wrote:
>>>
>>> Good to know. Now how do you cut inside Threads Mike or Mac?
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> --
>>> On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted) <
>>> legacym...@iglide.net> wrote:
>>>
 This bit is made to be used horizontally.  it can be used on the nut as
 well as the outer thread.  If you have a long bolt, you will need to cut it
 from the top using a regular V bit of the same pitch.
 On 12/28/2020 10:23 AM, Tim Ziegler wrote:

 Hey Mac,

 Would it be for the nut on the inside thread?
 Kind Regards,

 Timothy J. Ziegler
 --
 On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue 
 wrote:

> Saw this router bit on eBay - and can't wrap my mind around how you
> would use it to make threaded wood pieces - using the manual LOM like most
> of us have.  Seems like it's made to only use on a CNC Legacy.
> So, in case some of you have the CNC Legacy and are thinking of making
> threaded dowels/screws 

Re: Thread cutting router bit

[M.W.Foscue]

Tim,It must be those C-O-L-D temps you get up there - s-l-ow-i-n-g the video down to 16 seconds/frame vs 16 - 32 frames/second in warmer climes.  LoLNo - you have not experienced internet slowdown that bad.  The "video" seemds to be a video of a "slide show" Bill put together.Your ? re: advancing the cutter is one I had.   I think he actually advances the piece being "threaded" - and rotates it at the pitch he chose.  And to do that, either the cutter of the piece being threaded has to be offset by the radius of the desired diameter of the threads (for internal ones).  Something similar for external threads.Turn the heat on/up in your home and the video will play faster! Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 28, 2020 6:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit

Am I the only one that see's that as pictures? Is it not playing as a video on my end?So how did you advance into the part Bill when you run your threads?by the way where has Joe been again?Kind Regards,Timothy J. ZieglerOn Mon, Dec 28, 2020 at 5:02 PM M.W.Foscue  wrote:Thanks Bill & Mike,I watched the full length "video" of Bill's.  I saw how he set up his equipment to 'thread the outside of the "bolt" and then the "Rube Goldberg" setup to use the side-cutting thread cutter by Magnate to thread the inside of the nut.It is my thinking  that very few Group members have a setup such that we can make that Magnate side cutter put threads on a wooden piece to create either a bolt or a nut.  Several of you guys are GENIUSES when it comes to "making it work"! (Mike P; Tim K; Bill B; Curtis; and, yes - EVEN NY Joe! (LoL! Actually ESPECIALLY NY Joe!!!) - among several others). Thanks for your input.Mac-Original Message-
From: "Okla Mike (Liltwisted)" 
Sent: Dec 28, 2020 5:34 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit



  
  
Yes, Watch the video here is a clip from it 
On 12/28/2020 12:38 PM, M.W.Foscue
  wrote:


  
  
  
Mike,
Tim (I think) & I are referring to if you use the
  "Thread-cutting" Magnate bit that's on eBay.  Not the bit Bill
  used in his video on the screw shank.  That bit was
  essentially a V-bit.  The eBay bit is side-cutting.
Mac
  
-Original
  Message-
  
  From: "Okla Mike (Liltwisted)" 

Sent: Dec 28, 2020 1:06 PM

To: legacy-ornamental-mills@googlegroups.com

Subject: Re: Thread cutting router bit


Attach the router to the carriage and it
will be set on the gear pitch of your choice.


 
On 12/28/2020 11:37 AM, Tim
  Ziegler wrote:


  thanks Mike


How is it fed then? to keep the bit on track? 

  

  
Kind Regards,
  
  
  Timothy J. Ziegler


  

  

  
  
On Mon, Dec 28, 2020
  at 11:07 AM Okla Mike (Liltwisted) 
  wrote:


  
Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk

On 12/28/2020 10:35 AM, Tim Ziegler wrote:


  Good to know. Now how do you cut
inside Threads Mike or Mac?

  

  Kind Regards,


Timothy J. Ziegler
  
  

  

  
  
On Mon, Dec
  28, 2020 at 10:29 AM Okla Mike (Liltwisted)
  
  wrote:


  
This bit is made to be
used horizontally.  it can be used on
the nut as well as the outer thread.  If
you have a long bolt, you will need to
cut it from the top using a regular V
  

Re: Thread cutting router bit

[Tim Ziegler]

Am I the only one that see's that as pictures? Is it not playing as a video
on my end?
So how did you advance into the part Bill when you run your threads?

by the way where has Joe been again?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 5:02 PM M.W.Foscue  wrote:

> Thanks Bill & Mike,
> I watched the full length "video" of Bill's.  I saw how he set up his
> equipment to 'thread the outside of the "bolt" and then the "Rube Goldberg"
> setup to use the side-cutting thread cutter by Magnate to thread the inside
> of the nut.
> It is my thinking  that very few Group members have a setup such that we
> can make that Magnate side cutter put threads on a wooden piece to create
> either a bolt or a nut.  Several of you guys are GENIUSES when it comes to
> "making it work"! (Mike P; Tim K; Bill B; Curtis; and, yes - EVEN NY Joe!
> (LoL! Actually ESPECIALLY NY Joe!!!) - among several others).
> Thanks for your input.
> Mac
> --
>
> -Original Message-
> From: "Okla Mike (Liltwisted)"
> Sent: Dec 28, 2020 5:34 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Thread cutting router bit
>
> Yes, Watch the video here is a clip from it
> --
>
> On 12/28/2020 12:38 PM, M.W.Foscue wrote:
>
> Mike,
> Tim (I think) & I are referring to if you use the "Thread-cutting" Magnate
> bit that's on eBay.  Not the bit Bill used in his video on the screw
> shank.  That bit was essentially a V-bit.  The eBay bit is side-cutting.
> Mac
> --
>
> -Original Message-
> From: "Okla Mike (Liltwisted)"
> Sent: Dec 28, 2020 1:06 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Thread cutting router bit
>
> Attach the router to the carriage and it will be set on the gear pitch of
> your choice.
> --
>
> On 12/28/2020 11:37 AM, Tim Ziegler wrote:
>
> thanks Mike
>
> How is it fed then? to keep the bit on track?
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Mon, Dec 28, 2020 at 11:07 AM Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
>> Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk
>> On 12/28/2020 10:35 AM, Tim Ziegler wrote:
>>
>> Good to know. Now how do you cut inside Threads Mike or Mac?
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> --
>> On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted) <
>> legacym...@iglide.net> wrote:
>>
>>> This bit is made to be used horizontally.  it can be used on the nut as
>>> well as the outer thread.  If you have a long bolt, you will need to cut it
>>> from the top using a regular V bit of the same pitch.
>>> On 12/28/2020 10:23 AM, Tim Ziegler wrote:
>>>
>>> Hey Mac,
>>>
>>> Would it be for the nut on the inside thread?
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> --
>>> On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue 
>>> wrote:
>>>
 Saw this router bit on eBay - and can't wrap my mind around how you
 would use it to make threaded wood pieces - using the manual LOM like most
 of us have.  Seems like it's made to only use on a CNC Legacy.
 So, in case some of you have the CNC Legacy and are thinking of making
 threaded dowels/screws  - this might be what you are looking for.

 https://www.ebay.com/itm/153156308964?ul_noapp=true

 Mac
 --

>>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/250393592.5077.1609196541895%40wamui-gaston.atl.sa.earthlink.net
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFRFid5v2gwa6XfaPZZ0ErScoKPcQ-gO8Dj_Y%3DNeYaLvw%40mail.gmail.com.

Re: legacy drive motor

[M.W.Foscue]

HOLY COW, Bill!Here in the USA we have seen complete LOMs - WITH the motor & switches sell for twice that listed price.  And on top of that price, we'd probably have a hefty shipping charge.  Thanks for sharing.  We'll let you have it!! (S will be a LOT less for you!)Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Dec 28, 2020 3:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy drive motor

Anyone need a drive motor for their legacy?https://www.ebay.com/itm/114598076015?ul_noapp=true Bill




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/590257902.5170.1609197301172%40wamui-gaston.atl.sa.earthlink.net.

Re: Thread cutting router bit

[M.W.Foscue]

Thanks Bill & Mike,I watched the full length "video" of Bill's.  I saw how he set up his equipment to 'thread the outside of the "bolt" and then the "Rube Goldberg" setup to use the side-cutting thread cutter by Magnate to thread the inside of the nut.It is my thinking  that very few Group members have a setup such that we can make that Magnate side cutter put threads on a wooden piece to create either a bolt or a nut.  Several of you guys are GENIUSES when it comes to "making it work"! (Mike P; Tim K; Bill B; Curtis; and, yes - EVEN NY Joe! (LoL! Actually ESPECIALLY NY Joe!!!) - among several others). Thanks for your input.Mac-Original Message-
From: "Okla Mike (Liltwisted)" 
Sent: Dec 28, 2020 5:34 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit



  
  
Yes, Watch the video here is a clip from it 
On 12/28/2020 12:38 PM, M.W.Foscue
  wrote:


  
  
  
Mike,
Tim (I think) & I are referring to if you use the
  "Thread-cutting" Magnate bit that's on eBay.  Not the bit Bill
  used in his video on the screw shank.  That bit was
  essentially a V-bit.  The eBay bit is side-cutting.
Mac
  
-Original
  Message-
  
  From: "Okla Mike (Liltwisted)" 

Sent: Dec 28, 2020 1:06 PM

To: legacy-ornamental-mills@googlegroups.com

Subject: Re: Thread cutting router bit


Attach the router to the carriage and it
will be set on the gear pitch of your choice.


 
On 12/28/2020 11:37 AM, Tim
  Ziegler wrote:


  thanks Mike


How is it fed then? to keep the bit on track? 

  

  
Kind Regards,
  
  
  Timothy J. Ziegler


  

  

  
  
On Mon, Dec 28, 2020
  at 11:07 AM Okla Mike (Liltwisted) 
  wrote:


  
Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk

On 12/28/2020 10:35 AM, Tim Ziegler wrote:


  Good to know. Now how do you cut
inside Threads Mike or Mac?

  

  Kind Regards,


Timothy J. Ziegler
  
  

  

  
  
On Mon, Dec
  28, 2020 at 10:29 AM Okla Mike (Liltwisted)
  
  wrote:


  
This bit is made to be
used horizontally.  it can be used on
the nut as well as the outer thread.  If
you have a long bolt, you will need to
cut it from the top using a regular V
bit of the same pitch.

On 12/28/2020 10:23 AM, Tim Ziegler
  wrote:


  Hey Mac,


Would it be for the nut on the
  inside thread?
  

  Kind Regards,


Timothy J. Ziegler
  
  

  

  
  
On
  Mon, Dec 28, 2020 at 10:12 AM
  M.W.Foscue 
   

RE: Thread cutting router bit

[bulkeley]

Like this https://www.youtube.com/watch?v=J1RPgkrqiBk 
 
=13s_channel=aussiman77181

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 29 December 2020 3:12 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Thread cutting router bit

 

Saw this router bit on eBay - and can't wrap my mind around how you would use 
it to make threaded wood pieces - using the manual LOM like most of us have.  
Seems like it's made to only use on a CNC Legacy.  

So, in case some of you have the CNC Legacy and are thinking of making threaded 
dowels/screws  - this might be what you are looking for.

 

https://www.ebay.com/itm/153156308964?ul_noapp=true

 

Mac

  _  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net
 

 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d6dd57%24a19702d0%24e4c50870%24%40mmnet.com.au.

legacy drive motor

[bulkeley]

Anyone need a drive motor for their legacy?

https://www.ebay.com/itm/114598076015?ul_noapp=true

 

Bill



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001901d6dd55%243e65b5a0%24bb3120e0%24%40mmnet.com.au.

Re: Thread cutting router bit

[M.W.Foscue]

Mike,Tim (I think) & I are referring to if you use the "Thread-cutting" Magnate bit that's on eBay.  Not the bit Bill used in his video on the screw shank.  That bit was essentially a V-bit.  The eBay bit is side-cutting.Mac-Original Message-
From: "Okla Mike (Liltwisted)" 
Sent: Dec 28, 2020 1:06 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit



  
  
Attach the router to the carriage and it will be
set on the gear pitch of your choice.

On 12/28/2020 11:37 AM, Tim Ziegler
  wrote:


  
  thanks Mike


How is it fed then? to keep the bit on track? 


  
Kind Regards,
  
  
  Timothy J. Ziegler
  


  
  
On Mon, Dec 28, 2020 at 11:07
  AM Okla Mike (Liltwisted) 
  wrote:


  
Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk

On 12/28/2020 10:35 AM, Tim Ziegler wrote:


  Good to know. Now how do you cut inside
Threads Mike or Mac?

  

  Kind Regards,


Timothy J. Ziegler

  
  
  
On Mon, Dec 28, 2020
  at 10:29 AM Okla Mike (Liltwisted) 
  wrote:


  
This bit is made to be used
horizontally.  it can be used on the nut as well
as the outer thread.  If you have a long bolt,
you will need to cut it from the top using a
regular V bit of the same pitch.

On 12/28/2020 10:23 AM, Tim Ziegler wrote:


  Hey Mac,


Would it be for the nut on the inside
  thread?
  

  Kind Regards,


Timothy J. Ziegler

  
  

  
  
  
On Mon, Dec
  28, 2020 at 10:12 AM M.W.Foscue 
  wrote:


  

  Saw this router bit on eBay - and
can't wrap my mind around how you would
use it to make threaded wood pieces -
using the manual LOM like most of us
have.  Seems like it's made to only use
on a CNC Legacy.  
  
  So, in case some of you have the CNC
Legacy and are thinking of making
threaded dowels/screws  - this might be
what you are looking for.
  
  
  
  https://www.ebay.com/itm/153156308964?ul_noapp=true
  
  
  
  Mac
 

  



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/634112501.3006.1609180682588%40wamui-gaston.atl.sa.earthlink.net.

Re: Thread cutting router bit

[Okla Mike (Liltwisted)]

Attach the router to the carriage and it will be set on the gear pitch 
of your choice.


On 12/28/2020 11:37 AM, Tim Ziegler wrote:

thanks Mike

How is it fed then? to keep the bit on track?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 11:07 AM Okla Mike (Liltwisted) 
mailto:legacym...@iglide.net>> wrote:


Here is a video from Bill
https://www.youtube.com/watch?v=J1RPgkrqiBk


On 12/28/2020 10:35 AM, Tim Ziegler wrote:

Good to know. Now how do you cut inside Threads Mike or Mac?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted)
mailto:legacym...@iglide.net>> wrote:

This bit is made to be used horizontally.  it can be used on
the nut as well as the outer thread.  If you have a long
bolt, you will need to cut it from the top using a regular V
bit of the same pitch.

On 12/28/2020 10:23 AM, Tim Ziegler wrote:

Hey Mac,

Would it be for the nut on the inside thread?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue
mailto:mwfos...@earthlink.net>> wrote:

Saw this router bit on eBay - and can't wrap my mind
around how you would use it to make threaded wood pieces
- using the manual LOM like most of us have.  Seems like
it's made to only use on a CNC Legacy.
So, in case some of you have the CNC Legacy and are
thinking of making threaded dowels/screws  - this might
be what you are looking for.

https://www.ebay.com/itm/153156308964?ul_noapp=true


Mac


-- 
You received this message because you are subscribed to

the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net

.

-- 
You received this message because you are subscribed to the

Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCRc-oiVYK-dTtiKhBgxjmap5R8vmz%2BhQYmoic-OXSyg%40mail.gmail.com

.
-- 
You received this message because you are subscribed to the

Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/34e48759-dcfa-e4b4-a183-9e933588736b%40iglide.net

.

-- 
You received this message because you are subscribed to the

Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE%3DV3WfL0Y8y9D1qK_Z56abY3EaS4bsdR3ozNMCS3CAdA%40mail.gmail.com

Re: Thread cutting router bit

[M.W.Foscue]

That was my puzzlement (question) as well.Looks like Bill has ingeniously created a real "Rube Goldberg" machine to accomplish that action.  LoL!Thanks, Mike.Mac-Original Message-
From: Tim Ziegler 
Sent: Dec 28, 2020 12:37 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit

thanks MikeHow is it fed then? to keep the bit on track? Kind Regards,Timothy J. ZieglerOn Mon, Dec 28, 2020 at 11:07 AM Okla Mike (Liltwisted)  wrote:

  
  
Here is a video from Bill
https://www.youtube.com/watch?v=J1RPgkrqiBk

On 12/28/2020 10:35 AM, Tim Ziegler
  wrote:


  
  Good to know. Now how do you cut inside Threads
Mike or Mac?

  

  Kind Regards,


Timothy J. Ziegler

  
  

  
  
  
On Mon, Dec 28, 2020 at 10:29
  AM Okla Mike (Liltwisted) 
  wrote:


  
This bit is made to be used
horizontally.  it can be used on the nut as well as the
outer thread.  If you have a long bolt, you will need to
cut it from the top using a regular V bit of the same
pitch.

On 12/28/2020 10:23 AM, Tim Ziegler wrote:


  Hey Mac,


Would it be for the nut on the inside thread?
  

  Kind Regards,


Timothy J. Ziegler
  

  
  
  
On Mon, Dec 28, 2020
  at 10:12 AM M.W.Foscue 
  wrote:


  

  Saw this router bit on eBay - and can't wrap
my mind around how you would use it to make
threaded wood pieces - using the manual LOM like
most of us have.  Seems like it's made to only
use on a CNC Legacy.  
  
  So, in case some of you have the CNC Legacy
and are thinking of making threaded
dowels/screws  - this might be what you are
looking for.
  
  
  
  https://www.ebay.com/itm/153156308964?ul_noapp=true
  
  
  
  Mac
 

  



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/562758353.2557.1609177396545%40wamui-gaston.atl.sa.earthlink.net.

Re: Thread cutting router bit

[Tim Ziegler]

thanks Mike

How is it fed then? to keep the bit on track?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 11:07 AM Okla Mike (Liltwisted) <
legacym...@iglide.net> wrote:

> Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk
> On 12/28/2020 10:35 AM, Tim Ziegler wrote:
>
> Good to know. Now how do you cut inside Threads Mike or Mac?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
>> This bit is made to be used horizontally.  it can be used on the nut as
>> well as the outer thread.  If you have a long bolt, you will need to cut it
>> from the top using a regular V bit of the same pitch.
>> On 12/28/2020 10:23 AM, Tim Ziegler wrote:
>>
>> Hey Mac,
>>
>> Would it be for the nut on the inside thread?
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue 
>> wrote:
>>
>>> Saw this router bit on eBay - and can't wrap my mind around how you
>>> would use it to make threaded wood pieces - using the manual LOM like most
>>> of us have.  Seems like it's made to only use on a CNC Legacy.
>>> So, in case some of you have the CNC Legacy and are thinking of making
>>> threaded dowels/screws  - this might be what you are looking for.
>>>
>>> https://www.ebay.com/itm/153156308964?ul_noapp=true
>>>
>>> Mac
>>> --
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net
>>> 
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCRc-oiVYK-dTtiKhBgxjmap5R8vmz%2BhQYmoic-OXSyg%40mail.gmail.com
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/34e48759-dcfa-e4b4-a183-9e933588736b%40iglide.net
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE%3DV3WfL0Y8y9D1qK_Z56abY3EaS4bsdR3ozNMCS3CAdA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/f6214a83-71f1-90e3-908d-4abbd2aa364e%40iglide.net
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

Re: Thread cutting router bit

[Okla Mike (Liltwisted)]

Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk

On 12/28/2020 10:35 AM, Tim Ziegler wrote:

Good to know. Now how do you cut inside Threads Mike or Mac?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted) 
mailto:legacym...@iglide.net>> wrote:


This bit is made to be used horizontally.  it can be used on the
nut as well as the outer thread.  If you have a long bolt, you
will need to cut it from the top using a regular V bit of the same
pitch.

On 12/28/2020 10:23 AM, Tim Ziegler wrote:

Hey Mac,

Would it be for the nut on the inside thread?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue
mailto:mwfos...@earthlink.net>> wrote:

Saw this router bit on eBay - and can't wrap my mind around
how you would use it to make threaded wood pieces - using the
manual LOM like most of us have.  Seems like it's made to
only use on a CNC Legacy.
So, in case some of you have the CNC Legacy and are thinking
of making threaded dowels/screws  - this might be what you
are looking for.

https://www.ebay.com/itm/153156308964?ul_noapp=true


Mac

-- 
You received this message because you are subscribed to the

Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net

.

-- 
You received this message because you are subscribed to the

Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCRc-oiVYK-dTtiKhBgxjmap5R8vmz%2BhQYmoic-OXSyg%40mail.gmail.com

.
-- 
You received this message because you are subscribed to the Google

Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/34e48759-dcfa-e4b4-a183-9e933588736b%40iglide.net

.

--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE%3DV3WfL0Y8y9D1qK_Z56abY3EaS4bsdR3ozNMCS3CAdA%40mail.gmail.com 
.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/f6214a83-71f1-90e3-908d-4abbd2aa364e%40iglide.net.

Re: Thread cutting router bit

[M.W.Foscue]

I can see how it will create a "single" thread (raised ring) - going 360º around the outside of a wood dowel/rod (or inside of a wooden "nut").But - what I can't see being able to do on the manual LOM is how you raise (or lower) the dowel/nut so that you create the "Screw" aspect - vs just making a level raised "pointed" spot - going all the way around the dowel (or inside the nut) - not having any pitch like a screw would.-Original Message-
From: Tim Ziegler 
Sent: Dec 28, 2020 11:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit

Good to know. Now how do you cut inside Threads Mike or Mac?Kind Regards,Timothy J. ZieglerOn Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted)  wrote:

  
  
This bit is made to be used horizontally.  it can
be used on the nut as well as the outer thread.  If you have a
long bolt, you will need to cut it from the top using a regular
V bit of the same pitch.

On 12/28/2020 10:23 AM, Tim Ziegler
  wrote:


  
  Hey Mac,


Would it be for the nut on the inside thread?
  

  Kind Regards,


Timothy J. Ziegler

  
  

  
  
  
On Mon, Dec 28, 2020 at 10:12
  AM M.W.Foscue  wrote:


  

  Saw this router bit on eBay - and can't wrap my mind
around how you would use it to make threaded wood pieces
- using the manual LOM like most of us have.  Seems like
it's made to only use on a CNC Legacy.  
  
  So, in case some of you have the CNC Legacy and are
thinking of making threaded dowels/screws  - this might
be what you are looking for.
  
  
  
  https://www.ebay.com/itm/153156308964?ul_noapp=true
  
  
  
  Mac
 

  



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/364734703.2075.1609174230176%40wamui-gaston.atl.sa.earthlink.net.

Re: Thread cutting router bit

[Tim Ziegler]

Good to know. Now how do you cut inside Threads Mike or Mac?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted) <
legacym...@iglide.net> wrote:

> This bit is made to be used horizontally.  it can be used on the nut as
> well as the outer thread.  If you have a long bolt, you will need to cut it
> from the top using a regular V bit of the same pitch.
> On 12/28/2020 10:23 AM, Tim Ziegler wrote:
>
> Hey Mac,
>
> Would it be for the nut on the inside thread?
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue 
> wrote:
>
>> Saw this router bit on eBay - and can't wrap my mind around how you would
>> use it to make threaded wood pieces - using the manual LOM like most of us
>> have.  Seems like it's made to only use on a CNC Legacy.
>> So, in case some of you have the CNC Legacy and are thinking of making
>> threaded dowels/screws  - this might be what you are looking for.
>>
>> https://www.ebay.com/itm/153156308964?ul_noapp=true
>>
>> Mac
>> --
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCRc-oiVYK-dTtiKhBgxjmap5R8vmz%2BhQYmoic-OXSyg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/34e48759-dcfa-e4b4-a183-9e933588736b%40iglide.net
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE%3DV3WfL0Y8y9D1qK_Z56abY3EaS4bsdR3ozNMCS3CAdA%40mail.gmail.com.

Re: Thread cutting router bit

[Okla Mike (Liltwisted)]

This bit is made to be used horizontally.  it can be used on the nut as 
well as the outer thread.  If you have a long bolt, you will need to cut 
it from the top using a regular V bit of the same pitch.


On 12/28/2020 10:23 AM, Tim Ziegler wrote:

Hey Mac,

Would it be for the nut on the inside thread?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue > wrote:


Saw this router bit on eBay - and can't wrap my mind around how
you would use it to make threaded wood pieces - using the manual
LOM like most of us have.  Seems like it's made to only use on a
CNC Legacy.
So, in case some of you have the CNC Legacy and are thinking of
making threaded dowels/screws  - this might be what you are
looking for.

https://www.ebay.com/itm/153156308964?ul_noapp=true


Mac

-- 
You received this message because you are subscribed to the Google

Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com
.
To view this discussion on the web visit

https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net

.

--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCRc-oiVYK-dTtiKhBgxjmap5R8vmz%2BhQYmoic-OXSyg%40mail.gmail.com 
.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/34e48759-dcfa-e4b4-a183-9e933588736b%40iglide.net.

Re: Thread cutting router bit

[Tim Ziegler]

Hey Mac,

Would it be for the nut on the inside thread?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue  wrote:

> Saw this router bit on eBay - and can't wrap my mind around how you would
> use it to make threaded wood pieces - using the manual LOM like most of us
> have.  Seems like it's made to only use on a CNC Legacy.
> So, in case some of you have the CNC Legacy and are thinking of making
> threaded dowels/screws  - this might be what you are looking for.
>
> https://www.ebay.com/itm/153156308964?ul_noapp=true
>
> Mac
> --
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCRc-oiVYK-dTtiKhBgxjmap5R8vmz%2BhQYmoic-OXSyg%40mail.gmail.com.

Thread cutting router bit

[M.W.Foscue]

Saw this router bit on eBay - and can't wrap my mind around how you would use it to make threaded wood pieces - using the manual LOM like most of us have.  Seems like it's made to only use on a CNC Legacy.  So, in case some of you have the CNC Legacy and are thinking of making threaded dowels/screws  - this might be what you are looking for.https://www.ebay.com/itm/153156308964?ul_noapp=trueMac 



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1770123844.1763.1609171942298%40wamui-gaston.atl.sa.earthlink.net.