Re: kppp on valium
You might want to setup separate logging for pppd to see exactly what its doing. The SxS covers how to do this. --- Tony Alfrey <[EMAIL PROTECTED]> wrote: > OK, so far we've got the following: > > 1./sbin/ifconfig shows that MTU in both distros is 1500 when > on-line > > 2.In SuSE 7.2; > > /etc/ppp/options contains (less comments) > > debug > noauth > crtscts > lock > asyncmap 0 > nodetach > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > > /etc/ppp/ip_up is a big script that does who-knows-what?? > > > 3. In COL LTP; > > /etc/ppp/options is commented out and empty anyway. > /etc/ppp/ip_up is commented out > > 4. Both kppp configs set at 56000 > > > > > On Saturday 07 July 2001 12:07 am, Mike Andrew wrote: > > On Saturday 07 July 2001 16:47, Net Llama wrote: > > > Start by comparing the MTU. run /sbin/ifconfig when dialed up. > > No matter which way you cut it, (kppp, ksafer, xisp, ppp scripts) > ALL > > of them ultimately refer to /etc/ppp/options for further "things to > > do". > > > The SxS contains a table ppp-> something, that defines which of the > > various /etc/ppp/files are referenced and when. > > > On Saturday 07 July 2001 02:44 am, Dallam wrote: > > Hi, > > Once you run /sbin/ifconfig and find the MTU setting, > > perhaps you might try adjusting it as it is probably > > set to 1500 by default. > > > Dallam > > > On Saturday 07 July 2001 04:15 am, Michael Scottaline wrote: > > > > > Check your port settings in kppp in your SuSE setup. > = Lonni J. Friedman [EMAIL PROTECTED] Linux FAQ & Step-by-step help:http://netllama.ipfox.com . __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
On Sun, 8 Jul 2001 00:06:16 -0400, Bruce Marshall wrote: >Put your OS/2 boot partition back > >You can still write grub to the MBR and then tell it to chain load to the >OS/2 bootmgr. That's the only way to get grub to load OS/2. True, That is how my wifes machine is doing it. But I'll be moving her over to Linux as soon as I can get a decent email client. I know, I know, but there is nothing yet to compare to PMMail. stayler ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
--- Collins Richey <[EMAIL PROTECTED]> wrote: > On Sat, 7 Jul 2001 16:23:47 -0500 Rick Sivernell <[EMAIL PROTECTED]> > wrote: > > > On Saturday 07 July 2001 09:44 am, you wrote: > > > Does anyone know the difference between these devices with respect > to > > > ide-scsi support? > > > > > > Advice on this group has always ben to use sr0&1, but Gentoo > recommends > > > scd0&1. I can get cds to mount using scd0&1, but will this work > for > > > burning cdroms (the xxx0 device is a cdrw). > > > > > > TIA > > > > Collins > > > > Great Question, I have the same problem. 2 scsi drives bus 2 ID 4 & > 5, also > > a IDE cdrom on bus 1 at hdc, really IDE bus 2 primary slot. Having > real > > problems here with this. > > After reading the kernel docs on devices (if all else fails, RTFM), I > don't get a definitive answer. The kernel folks describe /dev/srn for > ide-scsi, then remark "some also use scdn". Apparently, they are > equivalent. > > I don't have a clue about your problem, Rick, since I don't have any > real scsi devices. I had this fight with an external SCSI PLextor CD burner this past week. However, ide-scsi stuff has no relation to SCSI hardware, its only for IDE. My IDE CD burner at home is accessed as /dev/sr0. The SCSI burner at work can be mounted as /dev/sdd0 (very weird), but when i go to burn, i don't even bother with the device, i just use the scsibus,target,lun format in cdrecord. You could also use this for the IDE burners, BTW. = Lonni J. Friedman [EMAIL PROTECTED] Linux FAQ & Step-by-step help:http://netllama.ipfox.com . __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Kernel 2.4.6
i'm running -ac2 and i don't see any IP problems. but that's the -ac series, ymmv. thanks! joe Bruce Marshall wrote: >Has anyone here loaded up the generic 2.4.6 kernel yet? > >I tried today and I'm wondering if the config is broken. I've tried to >configure for iptables but despite turning on everything I think is related >to IP (more than I wanted to turn on) I still get a lot of unresolved >references from depmod -a. > >Anyone else seeing this? > > ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
In order to get rid of BM, you need to use a BM rescue floppy or BM installed on a windows partition. You will break things if you try fdisk /mbr from a dos/win boot floppy and if you try to overwrite it with either grub or lilo. Personally, I wish that Caldera hadn't offered it, but it was a stop-gap method when lilo had the 1024 cyl barrier. I don't know why they had it on eD2.4 since grub was offered and installed by default when one used Lizard to install. Is BM and/or PM offered with eW3.1 box set? If so, we'll keep getting questions and problems with people using it. I think Caldera was the only distro that offered this. Jim On Saturday July 07, 2001 9:59 pm, Ken Moffat wrote: > i use it, have since I started with OL2.3, works flawlessly. The install > of 2.4 added grub, so now I see both, and realize I could just disable > BM, but I leave it, not wanting to mess with it. > > On Sun, 08 Jul 2001 10:17:21 +1000 > > Keith Antoine <[EMAIL PROTECTED]> wrote: > > Personally, I would not touch BootMagic with a long sticky thingo. -- 10:42pm up 1 day, 11:46, 2 users, load average: 0.00, 0.00, 0.00 Running Caldera eD2.4 - Linux - because life is too short for reboots... _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: OV511 (USB camera)
Well, since I don't have the experience that you have with digital cameras, I'm glad to know that I'm wrong. I was going from memory on what I've read. This memory can be faulty. I've heard good and bad with devfs. I personally don't want to use it since some hardware/software want's to use the standard /dev/* and you have to create soft links to get some stuff to work. It's still too new but will be nice once it is fully designed and implemented and software supports it fully. Jim On Saturday July 07, 2001 7:11 pm, Keith Antoine wrote: > Sorry you are wrong especially with USB. There is no way that aeither of my > cameras can get a 'dev' that corresponds. I have a real suspiscion that > devfs would be able to see a driver but niot the setup as of now even with > the latest jkernels. As you know I have been in this for at least 6 months > now without success, thats why I had to reload M$ > > Jim Conner wrote: > > IIRC, you have to set it up similar to a usb hard drive/zip/ls120. This > > will give you the /dev/??? that corresponds to this device. You can then > > use some of the graphic/camera applications out there to use it. I > > haven't done this, but I'm just going on what I remember what I've read. > > If I'm wrong, please, somebody tell me. > > > > Jim > > -- 10:42pm up 1 day, 11:46, 2 users, load average: 0.00, 0.00, 0.00 Running Caldera eD2.4 - Linux - because life is too short for reboots... _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Kernel 2.4.6
Has anyone here loaded up the generic 2.4.6 kernel yet? I tried today and I'm wondering if the config is broken. I've tried to configure for iptables but despite turning on everything I think is related to IP (more than I wanted to turn on) I still get a lot of unresolved references from depmod -a. Anyone else seeing this? -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/08/01 00:07 + ++ 'Blessed are Those Who Run Around in Circles For Theirs Is the Revolution' ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
On Saturday 07 July 2001 23:52, Shawn Tayler wrote: > On Sun, 08 Jul 2001 10:17:21 +1000, Keith Antoine wrote: > >Personally, I would not touch BootMagic with a long sticky thingo. Been > > bad news for too many in the lists. > > I just dropped it. Only kept it around to boot OS/2, can't figure out > how grub will do it, but the problems nearly gone. Deleted my OS/2 > boot partition, just pulling the data I need from the rest > > stayler > Put your OS/2 boot partition back You can still write grub to the MBR and then tell it to chain load to the OS/2 bootmgr. That's the only way to get grub to load OS/2. -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/08/01 00:05 + ++ "Duct tape is like the Force. It has a light side, a dark side, and it holds the universe together" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
On Saturday 07 July 2001 23:15, Tony Alfrey wrote: > Both distros now set at 38K. I'll try 57K, but they already act > differently. > > On Saturday 07 July 2001 09:23 am, Lee wrote: > > On the kppp setup under devices set the moem speed for 57k > > Don't you really want to set them for 115200? You're missing a lot of throughput if you don't. -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/08/01 00:03 + ++ "A hermit is a deserter from the army of humanity." ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
On Sun, 08 Jul 2001 10:17:21 +1000, Keith Antoine wrote: >Personally, I would not touch BootMagic with a long sticky thingo. Been bad news for >too many in >the lists. I just dropped it. Only kept it around to boot OS/2, can't figure out how grub will do it, but the problems nearly gone. Deleted my OS/2 boot partition, just pulling the data I need from the rest stayler ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
re: Suse vs Mandrake decision
Thanks to the folks who offered their opinions of Mandrake vs. Suse. A couple of questions for those who have tried Mandrake 8.0: 1. Does the "standard" Mandrake 8.0 include all the usual stuff (Sever tools such as Samba, MySQL, etc.. and development tools, etc...), or are these available only in the "power pack" advertised on the Mandrake website? I wasn't able to clarify that myself on their website (the "comparison" page was broken). I'm wondering if there's really any extra value for me in the power pack. 2. Is the web-browser ready-to-go (with all plug-ins, etc... already working)? 3. Have others experienced the same "ugly font" problem and problems loading Star Office that Geoff has cited? Has anyone out there had any problems with installing Suse and getting things to work properly? Again, any further comments from anyone concerning either of the new Mandrake or Suse distributions are welcome. Thanks again, Mel __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
Both distros now set at 38K. I'll try 57K, but they already act differently. On Saturday 07 July 2001 09:23 am, Lee wrote: > On the kppp setup under devices set the moem speed for 57k > -- Tony Alfrey [EMAIL PROTECTED] "I'd rather be sailing" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: word perfect 8 in SuSE7.2
On Saturday 07 July 2001 07:41 pm, Joel Hammer wrote: > I'll pass along what someone told me: > > There are the two missing libraries from RH 7.1 > libc-5 > ld.so.1 > which prevented me from installing WP8. > > rpm -i --force ld.so-1.9.5-13.i386.rpm libc-5.3.12-31.i386.rpm > > > This is the command to use to upgrade. (on RH7.1) > > I can't guarantee they'll work with SUSE. > Joel Yes, thanks!. I have studied the Corel and SuSE archives a little (I guess I should have done that first) and a crucial component seems to be shlibs5 (same as libc-5). -- Tony Alfrey [EMAIL PROTECTED] "I'd rather be sailing" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
i use it, have since I started with OL2.3, works flawlessly. The install of 2.4 added grub, so now I see both, and realize I could just disable BM, but I leave it, not wanting to mess with it. On Sun, 08 Jul 2001 10:17:21 +1000 Keith Antoine <[EMAIL PROTECTED]> wrote: > Personally, I would not touch BootMagic with a long sticky thingo. > -- Ken Moffat [EMAIL PROTECTED] ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: PCMCIA CD Burner
On 7 Jul 2001, at 23:00, Shane A Broomhall boldly uttered: > > Which Thinkpad model are you using? > I am using an A20m, a resonably new IBM thinkpad that only really needs some > more ram as I only have 64 M at the moment. > > I have had this machine about 6 months. I used to use a cheaper thinkpad but > I am very happy with this machine, my other alternative is to change to a > machine with a built in CD burner, but that is extra cost that I would hope > to avoid. I like that series. One of my favorite features is the built-in PCI network card, if you have that option. At least on the T20, the earlier ones were 3com, the later ones were Intel. (my preference) It makes it way easy for networking in such a case because the Intel drivers are virtually identical to the desktop ones, no PCMCIA drivers necessary. I haven't used one with Linux tho - the Thinkpad I've got Linux on is an older 760XD. (various other complications because the modem and sound on it are done with an embedded multi-purpose DSP, which has never been supported under Linux.. sigh) -- Philip J. Koenig [EMAIL PROTECTED] Electric Kahuna Systems -- Computers & Communications for the New Millenium ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: word perfect 8 in SuSE7.2
I'll pass along what someone told me: There are the two missing libraries from RH 7.1 libc-5 ld.so.1 which prevented me from installing WP8. rpm -i --force ld.so-1.9.5-13.i386.rpm libc-5.3.12-31.i386.rpm This is the command to use to upgrade. (on RH7.1) I can't guarantee they'll work with SUSE. Joel ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Konqueror
On 7 Jul 2001, at 18:40, Mike Andrew boldly uttered: > On Saturday 07 July 2001 15:28, Philip J. Koenig wrote: > > > The problem is, regardless whether you change the User-Agent string, > > there are fundamental differences in HTML parsing with particular > > browsers so it still won't work right in many cases - ie because they > > are putting code in the page that is proprietary to IE/Netscape, or > > specific workarounds to things like CSS rendering bugs etc. > > This holds true for the data being sent back to the browser, Ie, it's all > very well to 'pretend ' to be Netscape, but if you can't handle > whatever-it-is that Netscape does uniquely, then bang. Buit is it also fair > to say that the above is ALL that is required to phool a server into > believing it is a Netscape client, or does the server sniff elsewhere as well? AFAIK, if you tell Opera to masquerade as say Netscape, there is a portion of that string that still identifies it as Opera. (same goes for IE's original aping of Netscape) There are some various things that can be used to ascertain the capabilities of a browser, many of them being javascript. I know for example that you can determine the current screen resolution of modern browsers with javascript. MS has added all sorts of insidious things, active-x, cross- frame scripting, and also including the ability of a website to GRAB THE CURRENT CONTENTS OF YOUR CLIPBOARD. Be advised not to copy anything too personal to your clipboard if you use IE. (or at least turn it off, which is a security option) -- Philip J. Koenig [EMAIL PROTECTED] Electric Kahuna Systems -- Computers & Communications for the New Millenium ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Caldera eWorkstation 3.1 on Thinkpad
On 7 Jul 2001, at 6:19, Mike Andrew boldly uttered: > On Friday 06 July 2001 06:12, Philip J. Koenig wrote: > > the XF86 docs you get the impression all the setup and detection is > > much improved in 4.x, > > It is. No doubt about that. It doesn't make it perfect, but the old Sis, S3 > and other issues are no longer there. (most of it was solved circa Xfree > 3.3.6, but Xfree 4 is 'better'). It's not so much the detection but rather > the fact that the drivers now exist for the specific card. The detection > utilities (afaik) haven't changed. I'm just concerned that since I would be installing on a few-year old laptop, they haven't dropped or ignored testing the XF86 drivers for older machines. I don't have enough space to install on a separate partition, so if I decide to try 3.1 I'd have to blow off the existing installation. -- Philip J. Koenig [EMAIL PROTECTED] Electric Kahuna Systems -- Computers & Communications for the New Millenium ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
Tom Jandl wrote: > Skippy, scd0&1 means scd0 and scd1. & means "and" ;) Ok so & means 'and' but this does not appear in the dev lists that way, ther is no & used in that manner, thats what I meant. -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
Well srx has always been ide-sci cd device in linux and and as far back as I can remember scdx has been a ful blown sci device nomenclature. Collins Richey wrote: > > Where does the & come into it ? However the second one is for full scsi not >ide-scsi. > > > > Collins Richey wrote: > > > According to the answers I got, the two are equivalent - different names for the >same major/minor. -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
word perfect 8 in SuSE7.2
This topic came up on the caldera list but I think was never resolved and now I'm trying to install word perfect 8 into SuSE 7.2 It crashes on the install. It installs fine in COL LTP. Apparently WordPerfect Office 2000 needed an extra install script to get it to install in SuSE 7.1. Of course, the Corel ftp is hanging up on downloading the script so I can't even look at it to see what it wants for Office 2000, let alone wp8. Anybody out there got wp8 running in any recent SuSE?? Thanks! -- Tony Alfrey [EMAIL PROTECTED] "I'd rather be sailing" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
Skippy, scd0&1 means scd0 and scd1. & means "and" ;) Tom - Original Message - From: "Keith Antoine" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 07, 2001 7:15 PM Subject: Re: /dev/scd0&1 or /dev/sr0&1 > Where does the & come into it ? However the second one is for full scsi not ide-scsi. > > Collins Richey wrote: > > > Does anyone know the difference between these devices with respect to ide-scsi support? > > > > Advice on this group has always ben to use sr0&1, but Gentoo recommends scd0&1. I can get cds to mount using scd0&1, but will this work for burning cdroms (the xxx0 device is a cdrw). > > > > TIA > > -- > > Collins Richey > > Denver Area > > Gentoo_rc5 XFCE > > ___ > > http://linux.nf -- [EMAIL PROTECTED] > > Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users > > -- > Keith Antoine aka "Skippy" > 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 > Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! > Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
On Sun, 08 Jul 2001 10:15:53 +1000 Keith Antoine <[EMAIL PROTECTED]> wrote: > Where does the & come into it ? However the second one is for full scsi not ide-scsi. > > Collins Richey wrote: > > > Does anyone know the difference between these devices with respect to ide-scsi >support? > > > > Advice on this group has always ben to use sr0&1, but Gentoo recommends scd0&1. I >can get cds to mount using scd0&1, but will this work for burning cdroms (the xxx0 >device is a cdrw). > > > > TIA > > -- > > Collins Richey > > Denver Area > > Gentoo_rc5 XFCE > > ___ > > http://linux.nf -- [EMAIL PROTECTED] > > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users > According to the answers I got, the two are equivalent - different names for the same major/minor. -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
Personally, I would not touch BootMagic with a long sticky thingo. Been bad news for too many in the lists. Lee wrote: > Trying to install BootMagic on a Manrake 7.0 that is already installed > on the hd. Plan on adding SuSe later. Have BootMagic on a Partition > Magic 4.0 disk. When I try to execute the file with > /mnt/cdrom/BOOTMAGIC/ setup.exe Enter, I get a'" can't execute binary > file" error message. If i try . /mnt/cdrom/BOOTMAGIC/setup.exe I get the > same error message. Questions: 1) can BootMagic be installed from the > Partition Magic cd on an already installed Linux system, 2) how do I get > the binary file to execute from the cd? > > Thanks > Lee > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
Where does the & come into it ? However the second one is for full scsi not ide-scsi. Collins Richey wrote: > Does anyone know the difference between these devices with respect to ide-scsi >support? > > Advice on this group has always ben to use sr0&1, but Gentoo recommends scd0&1. I >can get cds to mount using scd0&1, but will this work for burning cdroms (the xxx0 >device is a cdrw). > > TIA > -- > Collins Richey > Denver Area > Gentoo_rc5 XFCE > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
No problem here. burns wrote: > Auyeung at Technet Systems wrote: > > > Interesting, Burns, > > > > Not only this article, but also your use of the Japanese fonts, which > > makes me wonder if you are in Japan enjoying your vacation,watching > > "Mikado", or eating Sushi ! > > Excuse me? > > According to my setup, I'm using "Western" encoding and "adobe times" > and "adobe helvetica". Unless someone else is seeing this problem, I > think it may be on your end. > > -- > burns > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: OV511 (USB camera)
Sorry you are wrong especially with USB. There is no way that aeither of my cameras can get a 'dev' that corresponds. I have a real suspiscion that devfs would be able to see a driver but niot the setup as of now even with the latest jkernels. As you know I have been in this for at least 6 months now without success, thats why I had to reload M$ Jim Conner wrote: > IIRC, you have to set it up similar to a usb hard drive/zip/ls120. This will > give you the /dev/??? that corresponds to this device. You can then use some > of the graphic/camera applications out there to use it. I haven't done this, > but I'm just going on what I remember what I've read. If I'm wrong, please, > somebody tell me. > > Jim > > On Saturday July 07, 2001 1:58 am, Mike Andrew wrote: > > I am trying to set up a small usb camera under Linux. A 'puretek PT-6007' > > (apparently) > > > > modprobe ov511 causes the following message stream in dmesg > > > > - > > ov511.c: USB OV511 camera found > > ov511.c: camera: Puretek PT-6007 > > usb-uhci.c: interrupt, status 3, frame# 1622 > > ov511.c: reg read: error -84 > > ov511.c: i2c write: error -84 > > ov511.c: write regvals: error -84 > > ov511.c: failed to configure OV76xx > > ov511.c: Failed to configure camera > > ov511.c: ov511 driver version 1.28 registered > > > > > > Note because of the last line, the module loads and modprobe is 'happy' > > > > Is this a camera problem or a beta usb problem? Are there some pointers you > > folks could give me, where to go next? I have looked at > > /usr/src/linux/Documentation/drivers/usb/ov511.txt, but don't want to delve > > too deeply into usb source code if possible. > > > > What 'applications' can I use to try this device out? Skippy? > > -- > > 1:42am up 14:46, 3 users, load average: 0.00, 0.06, 0.03 > > Running Caldera eD2.4 - Linux - because life is too short for reboots... > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: OV511 (USB camera)
Must say Mike that i do not know the 'Puretek", is this a webcamera or a full digital ? Why did you pick up on the OV511, any particular reason ? I have a logitech webcam which is not supported by the latest kernels also my digitals which again are not. Have you tried gphoto ?? Mike Andrew wrote: > I am trying to set up a small usb camera under Linux. A 'puretek PT-6007' > (apparently) > > modprobe ov511 causes the following message stream in dmesg > > - > ov511.c: USB OV511 camera found > ov511.c: camera: Puretek PT-6007 > usb-uhci.c: interrupt, status 3, frame# 1622 > ov511.c: reg read: error -84 > ov511.c: i2c write: error -84 > ov511.c: write regvals: error -84 > ov511.c: failed to configure OV76xx > ov511.c: Failed to configure camera > ov511.c: ov511 driver version 1.28 registered > > > Note because of the last line, the module loads and modprobe is 'happy' > > Is this a camera problem or a beta usb problem? Are there some pointers you > folks could give me, where to go next? I have looked at > /usr/src/linux/Documentation/drivers/usb/ov511.txt, but don't want to delve > too deeply into usb source code if possible. > > What 'applications' can I use to try this device out? Skippy? > > -- > http://linux.nf -- [EMAIL PROTECTED] > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Users Groups and driving....
as you know so do we in the Simpson Desert, but people do not ususally survive that area. Shawn Tayler wrote: > On Sat, 07 Jul 2001 09:36:06 +1000, Keith Antoine wrote: > > >Ptt- !! We still manage to kill >each other > >though. > > That is probably the scariest part of the whole equation. > > Montana has an unlimited speed limit during the day on the big > interstate highways. Nevada is at 75 mph, 120kph But we do have a > nice expanse of desert to play in. > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users -- Keith Antoine aka "Skippy" 18 Arkana St, The Gap, Queensland, 4061, Australia PH: 61 7 33002161 Certified Professional Geriatric, Sometime Electronics Engineer, Knowall!! Insensible phone computer assistance a speciality. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
On Sat, 7 Jul 2001 17:45:49 +, Collins Richey wrote: >After reading the kernel docs on devices (if all else fails, RTFM), I don't get a >definitive answer. The kernel folks describe /dev/srn for ide-scsi, then remark >"some also use scdn". Apparently, they are equivalent. > >I don't have a clue about your problem, Rick, since I don't have any real scsi >devices. Well I have both a SCSI CDR and CDROM. /dev/sr0 happens to be the CDR as it is ID'd before the CDROM, other than that they seem to work fine. I put a symbolic link in the /dev directory cdrom -> /dev/sr1 stayler ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
On Sat, 7 Jul 2001 16:23:47 -0500 Rick Sivernell <[EMAIL PROTECTED]> wrote: > On Saturday 07 July 2001 09:44 am, you wrote: > > Does anyone know the difference between these devices with respect to > > ide-scsi support? > > > > Advice on this group has always ben to use sr0&1, but Gentoo recommends > > scd0&1. I can get cds to mount using scd0&1, but will this work for > > burning cdroms (the xxx0 device is a cdrw). > > > > TIA > > Collins > > Great Question, I have the same problem. 2 scsi drives bus 2 ID 4 & 5, also > a IDE cdrom on bus 1 at hdc, really IDE bus 2 primary slot. Having real > problems here with this. After reading the kernel docs on devices (if all else fails, RTFM), I don't get a definitive answer. The kernel folks describe /dev/srn for ide-scsi, then remark "some also use scdn". Apparently, they are equivalent. I don't have a clue about your problem, Rick, since I don't have any real scsi devices. -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: SuSe vs. Mandrake decision
I have installed Mandrake 8.0 on a couple of machines. The good news is it installs very easily, even on pretty new hardware. I like the compatibility with RH RPMs so most software is available for it. I have had good luck getting CDRW to work and some difficulity getting DVD to work but that may be a problem with the drivers for my video card. btw...the cdrecord version that comes with the install needed to be updated from rpmfind.net before I could get the CDRW to actually burn cds. The bad newsI have had trouble loading Star Office 5.2 and WordPerfect 8. I have also had some issues with the flip/flop from lilo to grub and back to lilo as the default loader from earlier versions of Mandrake. I like grub and MDL 8.0 uses lilo. I find the printer system (CUPS) does not seem to work as well as what I was used to with Caldera. It drives my HP855C pretty slowly. The print quality is good but very slow. Also, I find print queue management not to work as well as Caldera. If you want to kill a print job, it is not as responsive. The ugly fonts problem is there in spades in KDE, Konqurer, other stuff and I have not yet found a good solution even following all the HOW-TO and other hints. On Saturday 07 July 2001 07:52 am, you wrote: > Hello: > > I'm using a Caldera OpenLinux 2.3 system now. I never > bothered to upgrade to 2.4 (deciding instead to > wait for the next generation Caldera distribution > which would have the latest kernel, KDE desktop, > etc...). I've heard mixed reviews about the new 3.1 > product and am finding my present system is getting > dated, so I'm considering other distributions. > > I'd like to get a distribution that has all of the > productivity/internet desktop stuff set up already so > that I can immediately get productive without spending > hours downloading things, installing them, and getting > > them to work. In particular, I need a good browser > with JAVA support, 128-bit encryption, Adobe > Acrobat, various plug-ins ,etc... already set > up so that I can immediately do just about > anything > on the internet that I can currently do from IE in the > Windows world. Although I'm a newbie currently > playing with Linux as a home desktop system, I see > myself eventually setting up my old P166 as a > file/print server for the household. It would also > host a relational database (such as MySQL ) . As a > developer, I'm also interested in the development > tools. > > I've looked at the websites for various distributions > and the two new ones that have caught my eye are > Suse 7.2 and Mandrake 8.0. I've seen some positive > first impressions of Suse posted on mail lists, but am > also looking at Mandrake because of its reputation as > having very intuitive/easy install, admin tools, > etc... Another issue might be availability of RPMs for > new applications (are there more application RPMs > developed for one distribution than for the other?) > > It occured to me that some of you out there may have > had an opportunity to compare the two. Perhaps there > are other factors I should be considering. Would > anyone out there care to share their > opinions/experiences? > > Thanks, > > Mel > > __ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc > ->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Reiserfs and SuSE 7.2
On Saturday 07 July 2001 12:14, you wrote: Hi, Bruce: I probably could have used fdisk or cfdisk to create a partition for SuSE, but instead, I chose to I boot Partition Magic 6.0 from a PM boot floppy that actually runs Caldera DR-DOS 7.0 to load Partition Magic. Then I created a ext2fs partition (I could have used *any fs type, I guess) and then booted the machine from the SuSE 7.2 install CD. The install program offered to delete, create, repartition and format an area in which to place a /boot partition and the / (root) installation, so I let it do that. I didn't see the file system type choice because I never got as far as the "expert partitioning." So it now appears a complete re-install will be required to try the Reiser file system. Oh, well... Regards, Glenn > Well 'splain me then. > > I too had a partition ready at first and skipped the partition > stuff... 7.2 went ahead and started MAKING NEW PARTITIONS out of > the areas I specified. I didn't care for that. > > My initial install was to put a small 'emergency system' in place > (which I usually do) and it made the partitions up using ALL OF THE > SPACE. Didn't care for that either. > > That's when I backed up and decided there must be a better way. > Using the expert partitioning, you can pre-make your partitions and > then use them as you will including setting up for reiserfs. > > + >+ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI > 07/07/01 14:11 + > + >+ "The most incomprehensible thing about the world is that it > is comprehensible." > - Albert Einstein. > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc > ->http://linux.nf/mailman/listinfo/linux-users -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
sanfrancisco:~$ dir /dev/scd* brw-rw-r-- 1 root disk 11, 0 Jun 28 22:48 /dev/scd0 brw-rw-r-- 1 root disk 11, 1 Jun 28 22:48 /dev/scd1 sanfrancisco:~$ dir /dev/sr* brw--- 1 joseph root 11, 0 Jun 28 22:48 /dev/sr0 brw-rw-r-- 1 root disk 11, 1 Jun 28 22:48 /dev/sr1 same major and minor nodes == no difference in functionality. sanfrancisco:~$ cat /etc/makedev.d/scsicd $numdevs{$name} = 16; $stddevs{$name} = "^([a-z]*[01])\$"; $generate{$name} = sub { &$MkNod ("cdrom", sprintf("scd%d",$i), "b", 11, $i); &$MkNod ("cdrom", sprintf("sr%d",$i), "b", 11, $i); } one makedev script to create both == no difference in use. iirc /dev/scd* is for backward compatibility with <= 2.2 kernels. yes, scd0 and sr0 will work fine for burning cdroms. rick: what problems are you having? thanks! joe Rick Sivernell wrote: >On Saturday 07 July 2001 09:44 am, you wrote: > >>Does anyone know the difference between these devices with respect to >>ide-scsi support? >> >>Advice on this group has always ben to use sr0&1, but Gentoo recommends >>scd0&1. I can get cds to mount using scd0&1, but will this work for >>burning cdroms (the xxx0 device is a cdrw). >> >>TIA >> > >Collins > > Great Question, I have the same problem. 2 scsi drives bus 2 ID 4 & 5, also >a IDE cdrom on bus 1 at hdc, really IDE bus 2 primary slot. Having real >problems here with this. > ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
Hi, Tony: Thanks for pointing this out. I'm beginning to discover that SuSE likes to put lots of stuff in config files. All good stuff to know. Regards, Glenn On Saturday 07 July 2001 15:43, you wrote: > On Saturday 07 July 2001 08:18 am, Glenn Williams wrote: [snip] > > it drops my Internet dialup > > connection when idle, for no apparent reason - maybe I'll find a > > configuration option for setting the idle timeout value). > > > > > > I'm beginning to learn something about this stuff. Look at > /etc/ppp/options in SuSE: It has some options in it that look like > they might be responsible for your drop-out. There are lots of > comments in the file that describe the various functions of each > option. BTW, comm and IRQ listings look good for both distros. -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: SDR - wireless on steroids
On Sat, 7 Jul 2001 13:09:54 -0500 Ronnie Gauthier <[EMAIL PROTECTED]> wrote: > July 2001 - Boardwatch, p.34 > Go to your newsstand and read it. > > It's called SDR, Software Defined Radio. Sorta like packet on steroids, but > different. The tests have gotten a 400MHz link to 30Mbps symetrical at 150 > miles. > This is amazing stuff. I wonder how much impact it will have on the current crop of wireless technologies? -- * * Registered Linux User Number 185956 * * ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
On Saturday 07 July 2001 11:09 am, Dallam Wych wrote: > If you do a man pppd and search idle ( /idleCR does that where CR > means the enter key), you will see the parameter idle n which stops > your side of the ppp connection after n seconds of inactivity (saves > you money if you forget to drop the line here in the UK...). > Try setting your idle seconds to about 1800 and see if it makes a > difference, I know that it did with mine. > Dallam Thanks! I posted my /etc/ppp/options a little bit ago. It has idle 600, but I'm not sure it is doing what it is supposed to. I had a 14 M rpm to download the other day, went out for a couple hours and came back. The connection to the ftp had died but I was still on-line, long after 600 seconds. -- Tony Alfrey [EMAIL PROTECTED] "I'd rather be sailing" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
- Original Message - From: Auyeung at Technet <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 07, 2001 9:00 AM Subject: Re: Redhat Tux 2.0 blows away all other webservers > work but I can't import my old mails in OE into Kmail, so I just keep using > the other OS. You can't? When I upgraded ed2.4 to kde2 I discovered a kmail import item in one of the menus. It appeared to be able to handle the importing of mail from OE. David Aikema ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
linux-users@linux.nf
Does anyone know the difference between these devices with respect to ide-scsi support? Advice on this group has always ben to use sr0&1, but Gentoo recommends scd0&1. I can get cds to mount using scd0&1, but will this work for burning cdroms (the xxx0 device is a cdrw). TIA -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
device for sound
Does anyone know which actual /dev/xxx entry is used for sound for xfce, etc. I'm not having much luck getting my esssolo1 card to work on Gentoo_rc5, although the write modules are loaded. -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
Yup, it will throw its stuff in C:/ or whatever is the active root and it is a windows app. dos emulation maybe?? Ronnie > On Saturday 07 July 2001 11:03, Lee wrote: > > Trying to install BootMagic on a Manrake 7.0 that is already installed > > on the hd. Plan on adding SuSe later. Have BootMagic on a Partition > > Magic 4.0 disk. When I try to execute the file with > > /mnt/cdrom/BOOTMAGIC/ setup.exe Enter, I get a'" can't execute binary > > file" error message. If i try . /mnt/cdrom/BOOTMAGIC/setup.exe I get the > > same error message. Questions: 1) can BootMagic be installed from the > > Partition Magic cd on an already installed Linux system, 2) how do I get > > the binary file to execute from the cd? > > > > I haven't used BootMagic for a looong time and then only briefly, but I > believe it requires DOS to use the setup. The files for setup must also > reside on a DOS drive. > > Why not use grub? > > > > +--- -+ > + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:50 + > +--- -+ > "If olive oil comes from olives, where does baby oil come from?" > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: CD burner in SuSE 7.2
UDF, Universal Disk Filesystem. Standard was written to insure cross-platform readability on any device. This link might help. http://www.trylinux.com/projects/udf/index.html CDRW can be reformatted to ISO9660 if needed. Check the docs of the software you are using. PS. Mandrake set-up my IDE mitsumi CDRW on install without a hitch and all works fine. Ronnie > Hi, Group: > > I am trying to set up my CD-R/RW drive in accordance with the > instructions in "CD-Burners - IDE" in the SxS. > > I'm able to mount the CD burner drive okay, but the file manager shows > a readme.txt file on a brand-new CD-RW disk with the following text > message: > > This disc contains a "UDF" file system and requires an operating system > that supports the ISO-13346 "UDF" file system specification. > > Does this mean I will not be able to use these RW disks on SuSE 7.2? > > Any ideas? > > Thanks, > > Glenn > > -- > Glenn Williams - [EMAIL PROTECTED] > Registered Linux User # 135678 > Powered by SuSE 7.2 > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Sylpheed
On Sat, 7 Jul 2001 09:56:35 -0700 "Steve Jardine" <[EMAIL PROTECTED]> wrote: > > I am trying out the Sylpheed package. Can someone direct me to the > spelling function? I am a bit confused here.. Did I simply overlook > it? well, if you've overlooked it then so have i ;) seriously though, i don't think it has one yet :( > Since I typically keep a huge amount of e-mail on hand, how is > Sylpheed with large folders? my inbox (and sub-folders) has over 55 MB in it -- Myles Green Calgary AB Canada *Slackware 8.0* -- Linux Step by Step Mirror: http://linuxsteps.webjump.com/ -- Calgary Linux Users Group (CLUG): http://www.calgary.linux.ca ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Reiserfs and SuSE 7.2
On Saturday 07 July 2001 13:54, Glenn Williams wrote: > On Saturday 07 July 2001 11:30, you wrote: > > On Saturday 07 July 2001 13:00, Glenn Williams wrote: > > > Hi, Group: > > [snip] > > > > when I installed SuSE > > > 7.1, I was offered the option of installing with Reiser file system > > > support. But when I installed version 7.2, I found no such option. > > [snip] > > > I installed from the boxed 7.2 pro version and found the reiserfs > > option under the expert partitioning there you specify mount > > points for partitions and how they should be formatted (if any). > > Aha! that makes sense. I had a partition ready and waiting, so I had > no reason to go into 'expert partitioning.' Well 'splain me then. I too had a partition ready at first and skipped the partition stuff... 7.2 went ahead and started MAKING NEW PARTITIONS out of the areas I specified. I didn't care for that. My initial install was to put a small 'emergency system' in place (which I usually do) and it made the partitions up using ALL OF THE SPACE. Didn't care for that either. That's when I backed up and decided there must be a better way. Using the expert partitioning, you can pre-make your partitions and then use them as you will including setting up for reiserfs. ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 14:11 + ++ "The most incomprehensible thing about the world is that it is comprehensible." - Albert Einstein. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
SDR - wireless on steroids
July 2001 - Boardwatch, p.34 Go to your newsstand and read it. It's called SDR, Software Defined Radio. Sorta like packet on steroids, but different. The tests have gotten a 400MHz link to 30Mbps symetrical at 150 miles. http://www.sdrforum.org/sdr_primer.html Ronnie ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
If you do a man pppd and search idle ( /idleCR does that where CR means the enter key), you will see the parameter idle n which stops your side of the ppp connection after n seconds of inactivity (saves you money if you forget to drop the line here in the UK...). The line idle 180 (3 minutes) could be inserted anywhere in your file /etc/ppp/options. There is of course an identical feature at the ISP's box. Since ISP's exist to make money (perhaps to save money in institutions such as a University), they could very well adjust this parameter when your matching pppd starts at the ISP, dependin on the day and time at which you connect, so as to serve more customers on the same number of phone lines. Essentially, what this means is that if your ISP has an automatic disconnect time that you can have another program "simulate activity" (ping) until the end of time and it won't matter...it's still going to disconnect you. I don't know of many ISP's that don't have some such system in place, perhaps yours doesn't. There is one ISP here in the UK that disconnects you after 4 minutes of inactivity (which I can't believe they do as one can spend more than 4 minutes reading articles on a site easily). Try setting your idle seconds to about 1800 and see if it makes a difference, I know that it did with mine. Dallam _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Reiserfs and SuSE 7.2
On Saturday 07 July 2001 11:30, you wrote: > On Saturday 07 July 2001 13:00, Glenn Williams wrote: > > Hi, Group: [snip] > > when I installed SuSE > > 7.1, I was offered the option of installing with Reiser file system > > support. But when I installed version 7.2, I found no such option. [snip] > I installed from the boxed 7.2 pro version and found the reiserfs > option under the expert partitioning there you specify mount > points for partitions and how they should be formatted (if any). Aha! that makes sense. I had a partition ready and waiting, so I had no reason to go into 'expert partitioning.' Thanks, Bruce Regards, Glenn -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
On Saturday 07 July 2001 11:20, you wrote: > On Sat, 07 Jul 2001, Glenn Williams cleverly noted: > > > > I'm running SuSE 7.2 and using 'kinternet' as well, and it's as > > fast as I could want (although it drops my Internet dialup > > connection when idle, for no apparent reason - maybe I'll find a > > configuration option for setting the idle timeout value). > > > == > What you might try, Glenn, if you need to keep your dial-up > connection alive while your occsionally inactive, is to run a program > like kbiff and set it up to check your mail server, say, every three > minutes. This is usually enought to keep the connection from being > dropped by most ISP's. Mike Hi, Mike: I will change the Kmail setting from polling every 10 minutes, to every 3 minutes. I bet that'll do it. (This problem does not exist when I use the kppp internet dialer instead of kinternet. Go figure.) Thanks, Regards, Glenn -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Reiserfs and SuSE 7.2
On Saturday 07 July 2001 13:00, Glenn Williams wrote: > Hi, Group: > > I installed the boxed 'Personal' edition of SuSE 7.2 last night, and it > appears to be a real winner. > > One thing that perplexes me, though, is that when I installed SuSE 7.1, > I was offered the option of installing with Reiser file system support. > But when I installed version 7.2, I found no such option. > > Was gibt? I know 7.2 supports reiserfs. > > Can this be added/change post-install? And if it's possible to add or > change the fs type, is it a good idea to do so, post-install? > > Would someone care to point me to some relevant reading, or share their > insight with me? I installed from the boxed 7.2 pro version and found the reiserfs option under the expert partitioning there you specify mount points for partitions and how they should be formatted (if any). ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 13:28 + ++ "I don't have any solution, but I certainly admire the problem" - Ashleigh Brilliant ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
On Sat, 07 Jul 2001, Glenn Williams cleverly noted: > > I'm running SuSE 7.2 and using 'kinternet' as well, and it's as fast as > I could want (although it drops my Internet dialup connection when > idle, for no apparent reason - maybe I'll find a configuration option > for setting the idle timeout value). == What you might try, Glenn, if you need to keep your dial-up connection alive while your occsionally inactive, is to run a program like kbiff and set it up to check your mail server, say, every three minutes. This is usually enought to keep the connection from being dropped by most ISP's. Mike -- "He may look like an idiot and talk like an idiot but don't let that fool you., he really is an idiot." -Groucho Marx ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
CD burner in SuSE 7.2
Hi, Group: I am trying to set up my CD-R/RW drive in accordance with the instructions in "CD-Burners - IDE" in the SxS. I'm able to mount the CD burner drive okay, but the file manager shows a readme.txt file on a brand-new CD-RW disk with the following text message: This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification. Does this mean I will not be able to use these RW disks on SuSE 7.2? Any ideas? Thanks, Glenn -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
Burns, Subject: Redhat Tux 2.0 blows away all other webservers Content-Type: text/plain; charset=ISO-2022-JP Content-Transfer-Encoding: 7bit the above is cut from your original header, note the charset. Ronnie - Original Message - From: Bruce Marshall <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 07, 2001 10:27 AM Subject: Re: Redhat Tux 2.0 blows away all other webservers > On Saturday 07 July 2001 10:59, Shawn Church wrote: > > Looks like you are using a plain text font but are using Japanese (JIS) > > character encoding. It's actually sort-of cool looking. > > > > Shawn > > > > > > Doesn't look cool here. it looks like the old CGA fonts seen on a 320 x > 240 monitor.Large and ugly. > > > -- > +--- -+ > + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:26 + > +--- -+ > "I may disagree with what you have to say, but I shall defend, to the death, > your right to say it." - Voltaire, French writer and philospher (1694-1778) > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Reiserfs and SuSE 7.2
Hi, Group: I installed the boxed 'Personal' edition of SuSE 7.2 last night, and it appears to be a real winner. One thing that perplexes me, though, is that when I installed SuSE 7.1, I was offered the option of installing with Reiser file system support. But when I installed version 7.2, I found no such option. Was gibt? I know 7.2 supports reiserfs. Can this be added/change post-install? And if it's possible to add or change the fs type, is it a good idea to do so, post-install? Would someone care to point me to some relevant reading, or share their insight with me? TIA Glenn -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
On Saturday 07 July 2001 12:03, Lee wrote: > Bruce Marshall wrote: > > > > >I on't have it. Well, it should be on eD2.4 if you have that otherwise it can be downloaded from: www.gnu.org/software/grub/grub.html I'd be happy to work you through it but making the floppy from the SxS should do it. A *much* better solution in my opinion. ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 13:00 + ++ "The only thing worse than being talked about is not being talked about." ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Sylpheed
I am trying out the Sylpheed package. Can someone direct me to the spelling function? I am a bit confused here.. Did I simply overlook it? Since I typically keep a huge amount of e-mail on hand, how is Sylpheed with large folders? Steve ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: what's happening?
Jeezus! What happened here? This is like reading the citations in a book of city ordinances. Is your word wap broke? The text goes all the way out to column 150 or so. I would have to change *my* composer word wrap to display what I received as I actually received it - but I think you get the idea. Hope you can fix the problem (At least I *think* it's your problem - none of my other messages are displayed that way.) On Saturday 07 July 2001 09:49, you wrote: > TCP 111, TCP515, TCP 12345 are all wellknown hacks. It looks > like you've been scanned for these hacks by some script kiddies. > Sure is enough to wake you up, though. TCP 111 is RPC. > TCP515 is LPD, TCP 12345 is some sort of trojan, I think > NetBus. For more information on these hacks, check out > http://www.securityfocus.com and search on these ports. You [snip] [etc., etc.] Regards, Glenn -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
On the kppp setup under devices set the moem speed for 57k Tony Alfrey wrote: > Hi gang! > > OK, I've got a case of kppp on sedatives and I don't know where to look. > My box has a Hayes 56K ISA modem (that never runs above 28K because of > slow phone lines, but that is not the issue) with manual jumpers. > On one partition, I run Caldera LTP with kppp 2.0.0 and my connection > is fine. > Now, on another partition, I have set up SuSE 7.2 with kppp 2.0.3 and > my connection speed is about one-third of the other. I run my box on > the desktop with no network or any added sophistication. > I've carefully checked both kppp configuration files and they are > identical. Since the modem has manual jumpers, port address and IRQ > are the same for the serial ports on both distros. > SuSE 7.2 comes with something called kinternet and it is equally slow. > How can I diagnose this problem?? > Thanks to all in advance for any ideas. > > -- > Tony Alfrey > [EMAIL PROTECTED] > "I'd rather be sailing" > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: what's happening?
[EMAIL PROTECTED] wrote: > > TCP 111, TCP515, TCP 12345 are all wellknown hacks. It looks like > you've been scanned for these hacks by some script kiddies. Sure is > enough to wake you up, though. TCP 111 is RPC. TCP515 is LPD, TCP > 12345 is some sort of trojan, I think NetBus. For more information on > these hacks, check out http://www.securityfocus.com and search on > these ports. You want to look up who owns these address ranges (at > www.arin.net) and email the people in charge of their security issues. > Include the logs, etc.. and voice your concerns. Don't expect an > answer, but you may receive one. Either way, the incident is noted > and you've pretty much done all you can do. You most likely have not > been hacked, but this is intrusive behavior and needs to be addressed. > Don't expect much beyond a "hey, you're on the Internet, expect it". I sent rr.com a message about some of their customers trying to crack my systems by writing _vti_pvt subdirs in my ftp root (now how many people are actually STUPID enough to put a world writable FTP root that is also their Webserver root -- oh, yeah, I forgot, anyone stupid enough to put IIS on the Internet with M$' defaults enabled, duh). Anyway, their idiot response was: you permit anonymous FTP access and that's all it was. So if you have an rr.com account, sorry, but you're prohibited from accessing my FTP server (get a new ISP). Irresponsible ISPs really need to be forced off the Internet (I also believe anyone who puts a server on the Internet should have to have a license as well, but that's another story). Unfortunately, the trend for irresponsible (read criminally negligent ISPs) is that they are growing. So expect this kind of behavior and block their IPs. They're the only ones to suffer. Ciao, David A. Bandel -- Focus on the dream, not the competition. -- Nemesis Racing Team motto ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
My mistake set it for 115k. Sorry about that. Tony Alfrey wrote: > Hi gang! > > OK, I've got a case of kppp on sedatives and I don't know where to look. > My box has a Hayes 56K ISA modem (that never runs above 28K because of > slow phone lines, but that is not the issue) with manual jumpers. > On one partition, I run Caldera LTP with kppp 2.0.0 and my connection > is fine. > Now, on another partition, I have set up SuSE 7.2 with kppp 2.0.3 and > my connection speed is about one-third of the other. I run my box on > the desktop with no network or any added sophistication. > I've carefully checked both kppp configuration files and they are > identical. Since the modem has manual jumpers, port address and IRQ > are the same for the serial ports on both distros. > SuSE 7.2 comes with something called kinternet and it is equally slow. > How can I diagnose this problem?? > Thanks to all in advance for any ideas. > > -- > Tony Alfrey > [EMAIL PROTECTED] > "I'd rather be sailing" > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
Bruce Marshall wrote: > On Saturday 07 July 2001 11:03, Lee wrote: > > Trying to install BootMagic on a Manrake 7.0 that is already installed > > on the hd. Plan on adding SuSe later. Have BootMagic on a Partition > > Magic 4.0 disk. When I try to execute the file with > > /mnt/cdrom/BOOTMAGIC/ setup.exe Enter, I get a'" can't execute binary > > file" error message. If i try . /mnt/cdrom/BOOTMAGIC/setup.exe I get the > > same error message. Questions: 1) can BootMagic be installed from the > > Partition Magic cd on an already installed Linux system, 2) how do I get > > the binary file to execute from the cd? > > > > I haven't used BootMagic for a looong time and then only briefly, but I > believe it requires DOS to use the setup. The files for setup must also > reside on a DOS drive. > > Why not use grub? >I on't have it. > > > ++ > + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:50 + > ++ > "If olive oil comes from olives, where does baby oil come from?" > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc >->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: SuSe vs. Mandrake decision
I haven't done anything with Mandrake 8.0 0r SuSe 7.2, but I have set up Mandrake 7.0 an SuSe 7.1. The Mandrake installs easier. Partitioning was a little strange after Caldera but easy to do. It found all of my hardware except the printer. Checked printtool after an found that Mandrake supports very few printers compare to Caldera. That may have been one of the improvements in 8.0. On the positive side it installs both Gnome and kde desktops so you can fool around with Gnome if you like.. The kde uses kppp which is a dream to setup. If you try to setup through Gnomes linuxconf get set for heavy rolls. It's cumbersome an creates error messages without any meaning but fortunately if you setup your internet connection with kde there is apparently some sort of sticky function between that also setups up your internet for Gnome. SuSe 7.1 was a little more complicated to install. Partitioning was plain weird and it also gives you 4 different choices to boot from. Which are three places you can make mistakes. Or you can tell the thing to use the entire hd. That solves most of your partitioning problems, but SuSe likes to install the swap at the head of the linux partition. I prefer the end that way I can later increase without too much trouble. Although you can add later swap through the terminal window command an modifying the boot up files. Once you have done everything on the install SuSe 7.1 loads packages. At the end of that though your not done. If you don't know what type of video card ou're running you can log in as root and give SuSe the superprobe command. This can lock up your system, but if it works you stand a pretty good chance of getting your video card ided. Then you have to go back to command line an order yast. This allows you to determine if the driver for your card has been loaded. If not, and one exists, you can load in yast. Then once again back to the command line order Sax. Sax allows you in Graphic format to configure your mouse, keyboard,monitor an desktop. Unfortunately it doesn't always work. I have an S3 compatible video card on one of my dual Mandrake systems. Mandrake identified an set it up with no fuss. SuSe, on the other hand, identified the card as an S3 compatible, but would give me no better 250 colors with the same card that Mandrake was running thousands of colors. Hint. doing Sax setup there is a test button on the desktop setup. Use it. Don't assume that because you have set the card and desktop up correctly that it will run. You may have to fudge things a little. Once setup SuSe is fairly easy to operate and it does a fair to middling job of installing system hardware. But, as I said this comparison is for Mandrake 7.0 and SuSe 7.1 they may have improve all this or even made it worse. Lee Mel Roman wrote: > Hello: > > I'm using a Caldera OpenLinux 2.3 system now. I never > bothered to upgrade to 2.4 (deciding instead to > wait for the next generation Caldera distribution > which would have the latest kernel, KDE desktop, > etc...). I've heard mixed reviews about the new 3.1 > product and am finding my present system is getting > dated, so I'm considering other distributions. > > I'd like to get a distribution that has all of the > productivity/internet desktop stuff set up already so > that I can immediately get productive without spending > hours downloading things, installing them, and getting > > them to work. In particular, I need a good browser > with JAVA support, 128-bit encryption, Adobe > Acrobat, various plug-ins ,etc... already set > up so that I can immediately do just about > anything > on the internet that I can currently do from IE in the > Windows world. Although I'm a newbie currently > playing with Linux as a home desktop system, I see > myself eventually setting up my old P166 as a > file/print server for the household. It would also > host a relational database (such as MySQL ) . As a > developer, I'm also interested in the development > tools. > > I've looked at the websites for various distributions > and the two new ones that have caught my eye are > Suse 7.2 and Mandrake 8.0. I've seen some positive > first impressions of Suse posted on mail lists, but am > also looking at Mandrake because of its reputation as > having very intuitive/easy install, admin tools, > etc... Another issue might be availability of RPMs for > new applications (are there more application RPMs > developed for one distribution than for the other?) > > It occured to me that some of you out there may have > had an opportunity to compare the two. Perhaps there > are other factors I should be considering. Would > anyone out there care to share their > opinions/experiences? > > Thanks, > > Mel > > __ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ > ___ > http://linux.nf -- [E
Re: Redhat Tux 2.0 blows away all other webservers
I use OE as my mailer and I don't install the Japanese fonts -- I don't understand them anyway. When I opened your last mail, OE asked me to download the Japanese fonts before it opened the mail. The font is beautiful, though. Agree with you that this might be my problem in using OE -- we know M$ people don't do things the way they should. I now have a dual boot system at work but I can't import my old mails in OE into Kmail, so I just keep using the other OS. :-) - Original Message - From: "burns" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 07, 2001 9:00 PM Subject: Re: Redhat Tux 2.0 blows away all other webservers > Auyeung at Technet Systems wrote: > > > Interesting, Burns, > > > > Not only this article, but also your use of the Japanese fonts, which > > makes me wonder if you are in Japan enjoying your vacation,watching > > "Mikado", or eating Sushi ! > > Excuse me? > > According to my setup, I'm using "Western" encoding and "adobe times" > and "adobe helvetica". Unless someone else is seeing this problem, I > think it may be on your end. > > -- > burns > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users > ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
SuSE 7.2 Review
>From the SuSE mailing list: There is a SuSE 7.2 review that is linked off of www.rootprompt.org. Here is the link to the article itself: http://www.linuxlookup.com/html/reviews/software/suse7.2.html The SuSE distro got 19 out of 20 points in the review. ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:57 + ++ "It is impossible to travel faster than the speed of light, and certainly not desirable, as one's hat keeps blowing off." - Woody Allen ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: what's happening?
TCP 111, TCP515, TCP 12345 are all wellknown hacks. It looks like you've been scanned for these hacks by some script kiddies. Sure is enough to wake you up, though. TCP 111 is RPC. TCP515 is LPD, TCP 12345 is some sort of trojan, I think NetBus. For more information on these hacks, check out http://www.securityfocus.com and search on these ports. You want to look up who owns these address ranges (at www.arin.net) and email the people in charge of their security issues. Include the logs, etc.. and voice your concerns. Don't expect an answer, but you may receive one. Either way, the incident is noted and you've pretty much done all you can do. You most likely have not been hacked, but this is intrusive behavior and needs to be addressed."MW Chang (linuxisum)" <[EMAIL PROTECTED]>Sent by: [EMAIL PROTECTED]07/07/2001 06:24 PM ZE8Please respond to linux-users To: Linux Users <[EMAIL PROTECTED]> cc: bcc: Subject: what's happening? Was I being hacked or was it a false alarm?I have rc.firewall.hundley and portsentry running.I noticed the most recent one is from networksolutions.com,puzzling...Jul 1 22:31:06 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.180.221.73:1099 203.198.21.135:111 L=60 S=0x00 I=31690 F=0x4000 T=51 SYN (#42)Jul 1 22:38:46 server kernel: Packet log: input REJECT ppp0 PROTO=6 195.134.35.145:2580 203.198.21.135:111 L=60 S=0x00 I=44490 F=0x4000 T=46 SYN (#42)Jul 1 23:31:56 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.178.237.174:3649 203.198.21.135:111 L=60 S=0x00 I=46517 F=0x4000 T=48 SYN (#42)Jul 2 18:08:29 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.123.202.130:4988 207.176.120.50:515 L=60 S=0x00 I=19882 F=0x4000 T=58 SYN (#42)Jul 3 21:38:35 server kernel: Packet log: input REJECT ppp0 PROTO=6 140.136.215.121:1047 168.70.138.114:515 L=60 S=0x00 I=10523 F=0x4000 T=40 SYN (#42)Jul 4 09:50:24 server kernel: Packet log: input REJECT ppp0 PROTO=6 146.96.245.5:4799 205.252.149.112:111 L=60 S=0x00 I=45070 F=0x4000 T=48 SYN (#42)Jul 4 20:03:01 server kernel: Packet log: input REJECT ppp0 PROTO=17 168.70.138.162:1037 168.70.138.168:22 L=30 S=0x00 I=38152 F=0x T=127 (#42)Jul 4 22:21:08 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.227.135.24:4008 203.198.134.153:111 L=60 S=0x00 I=25023 F=0x4000 T=53 SYN (#42)Jul 5 11:34:24 server kernel: Packet log: input REJECT ppp1 PROTO=17 203.198.169.55:1378 168.70.143.74:5632 L=30 S=0x00 I=42061 F=0x T=124 (#42)Jul 5 13:54:35 server kernel: Packet log: input REJECT ppp1 PROTO=6 61.140.60.25:80 168.70.143.74:45636 L=40 S=0x00 I=14046 F=0x4000 T=52 (#42)Jul 5 18:55:49 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.128.136.98:2700 203.198.134.2:111 L=60 S=0x00 I=60061 F=0x4000 T=53 SYN (#42)Jul 5 19:18:20 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.252.190.116:4196 203.198.134.2:111 L=60 S=0x00 I=48301 F=0x4000 T=48 SYN (#42)Jul 6 10:12:11 server kernel: Packet log: input REJECT ppp0 PROTO=6 61.129.64.5:2927 203.198.21.185:515 L=60 S=0x00 I=34473 F=0x4000 T=51 SYN (#42)Jul 6 12:20:59 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.144.255.146:4563 203.198.21.185:111 L=60 S=0x00 I=62321 F=0x4000 T=46 SYN (#42)Jul 6 12:47:18 server kernel: Packet log: input REJECT ppp0 PROTO=6 210.180.202.200:4632 203.198.21.185:111 L=60 S=0x00 I=50939 F=0x4000 T=49 SYN (#42)Jul 6 13:50:18 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.198.228.185:2371 203.198.21.185:12345 L=48 S=0x00 I=48417 F=0x4000 T=125 SYN (#11)Jul 6 14:27:07 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.227.135.24:4608 203.198.21.185:111 L=60 S=0x00 I=60772 F=0x4000 T=53 SYN (#42)Jul 6 15:55:17 server kernel: Packet log: input REJECT ppp0 PROTO=6 194.102.253.41:3224 203.198.21.185:111 L=60 S=0x00 I=52498 F=0x4000 T=42 SYN (#42)Jul 6 18:36:04 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.0.60.2:1954 203.198.21.185:111 L=60 S=0x00 I=17002 F=0x4000 T=40 SYN (#42)Jul 7 10:24:57 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.198.108.163:2738 168.70.138.6:12345 L=48 S=0x00 I=3634 F=0x4000 T=125 SYN (#11)Jul 7 17:18:17 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.128.136.98:1698 203.198.134.194:111 L=60 S=0x00 I=38352 F=0x4000 T=54 SYN (#42)Jul 7 18:02:23 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.105.222.13:2766 203.198.134.194:111 L=60 S=0x00 I=25843 F=0x4000 T=53 SYN (#42)___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
On Saturday 07 July 2001 11:03, Lee wrote: > Trying to install BootMagic on a Manrake 7.0 that is already installed > on the hd. Plan on adding SuSe later. Have BootMagic on a Partition > Magic 4.0 disk. When I try to execute the file with > /mnt/cdrom/BOOTMAGIC/ setup.exe Enter, I get a'" can't execute binary > file" error message. If i try . /mnt/cdrom/BOOTMAGIC/setup.exe I get the > same error message. Questions: 1) can BootMagic be installed from the > Partition Magic cd on an already installed Linux system, 2) how do I get > the binary file to execute from the cd? > I haven't used BootMagic for a looong time and then only briefly, but I believe it requires DOS to use the setup. The files for setup must also reside on a DOS drive. Why not use grub? ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:50 + ++ "If olive oil comes from olives, where does baby oil come from?" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: exucutimg binaries
Lee offered this little gem: % Trying to install BootMagic on a Manrake 7.0 that is already installed % on the hd. Plan on adding SuSe later. Have BootMagic on a Partition % Magic 4.0 disk. When I try to execute the file with % /mnt/cdrom/BOOTMAGIC/ setup.exe Enter, I get a'" can't execute binary % file" error message. If i try . /mnt/cdrom/BOOTMAGIC/setup.exe I get the % same error message. Questions: 1) can BootMagic be installed from the % Partition Magic cd on an already installed Linux system, 2) how do I get % the binary file to execute from the cd? I'm guessing that you have to run a Windows binary from the Windows operating system, unless you have Wine installed. Also make sure that the CD is mounted with the "exec" directive in /etc/fstab, or at least not with the "noexec" directive. Kurt ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Workstation 3.1, what's it all about?
On Saturday 07 July 2001 05:23, Collins Richey wrote: > On Sat, 7 Jul 2001 09:16:45 -0400 Bruce Marshall <[EMAIL PROTECTED]> wrote: > > On Friday 06 July 2001 22:10, Chris Kassopulo wrote: > > > On Fri, 6 Jul 2001 22:35:03 -0400 > > > > > > Bruce Marshall <[EMAIL PROTECTED]> wrote: > > It would be my emailer of choice (I think) if they had true multiple > > accounts. Anyone here follow their mailing list? > > Join the sylpheed mail group and voice your complaints. I don't have a > problem since I only use one account, and filtering works great for me. You're right of course but I'm still smarting from trying that with the Kmail list. I gave a list of reasonable suggestions and a few were answered and the rest were 'not interested'. I guess I could at least ask the question 'why' sylpheed operates the way it does. -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:27 + ++ "Men use thought only to justify their wrong doings, and speech only to conceal their thoughts." ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
On Saturday 07 July 2001 10:59, Shawn Church wrote: > Looks like you are using a plain text font but are using Japanese (JIS) > character encoding. It's actually sort-of cool looking. > > Shawn > > Doesn't look cool here. it looks like the old CGA fonts seen on a 320 x 240 monitor.Large and ugly. -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 11:26 + ++ "I may disagree with what you have to say, but I shall defend, to the death, your right to say it." - Voltaire, French writer and philospher (1694-1778) ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
exucutimg binaries
Trying to install BootMagic on a Manrake 7.0 that is already installed on the hd. Plan on adding SuSe later. Have BootMagic on a Partition Magic 4.0 disk. When I try to execute the file with /mnt/cdrom/BOOTMAGIC/ setup.exe Enter, I get a'" can't execute binary file" error message. If i try . /mnt/cdrom/BOOTMAGIC/setup.exe I get the same error message. Questions: 1) can BootMagic be installed from the Partition Magic cd on an already installed Linux system, 2) how do I get the binary file to execute from the cd? Thanks Lee ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
Hi, Tony: This may be way out in left field, but does a look at 'dmesg' reveal anything relating to a comm port IRQ or address conflict? I'm running SuSE 7.2 and using 'kinternet' as well, and it's as fast as I could want (although it drops my Internet dialup connection when idle, for no apparent reason - maybe I'll find a configuration option for setting the idle timeout value). Wish I could offer something more helpful. Regards, Glenn On Friday 06 July 2001 22:06, you wrote: > Hi gang! > > OK, I've got a case of kppp on sedatives and I don't know where to > look. My box has a Hayes 56K ISA modem (that never runs above 28K > because of slow phone lines, but that is not the issue) with manual > jumpers. On one partition, I run Caldera LTP with kppp 2.0.0 and my > connection is fine. > Now, on another partition, I have set up SuSE 7.2 with kppp 2.0.3 and > my connection speed is about one-third of the other. I run my box on > the desktop with no network or any added sophistication. > I've carefully checked both kppp configuration files and they are > identical. Since the modem has manual jumpers, port address and IRQ > are the same for the serial ports on both distros. > SuSE 7.2 comes with something called kinternet and it is equally > slow. How can I diagnose this problem?? > Thanks to all in advance for any ideas. -- Glenn Williams - [EMAIL PROTECTED] Registered Linux User # 135678 Powered by SuSE 7.2 ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: SuSe vs. Mandrake decision
On Sat, 7 Jul 2001 07:52:00 -0700 (PDT) Mel Roman <[EMAIL PROTECTED]> wrote: > Hello: > > I'm using a Caldera OpenLinux 2.3 system now. I never > bothered to upgrade to 2.4 (deciding instead to > wait for the next generation Caldera distribution > which would have the latest kernel, KDE desktop, > etc...). I've heard mixed reviews about the new 3.1 > product and am finding my present system is getting > dated, so I'm considering other distributions. > > I'd like to get a distribution that has all of the > productivity/internet desktop stuff set up already so > that I can immediately get productive without spending > hours downloading things, installing them, and getting > I had good results with Mndrake 8.0 (used it in the Beta period also). It's a little slow starting up, because it supports so many daemons, but otherwise it's a good distro. Others on this list like SuSe. -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Workstation 3.1, what's it all about?
On Sat, 7 Jul 2001 09:16:45 -0400 Bruce Marshall <[EMAIL PROTECTED]> wrote: > On Friday 06 July 2001 22:10, Chris Kassopulo wrote: > > On Fri, 6 Jul 2001 22:35:03 -0400 > > > > Bruce Marshall <[EMAIL PROTECTED]> wrote: > > > On Friday 06 July 2001 13:15, Collins Richey wrote: > > > > On Fri, 6 Jul 2001 09:03:33 -0400 Bruce Marshall <[EMAIL PROTECTED]> > > > > > > using a filter? > > > > > > > Sylpheed has had excellent filters as long as I have used it. You can > > > > set up as many folders as you like and filter into them. Any > > > > unfiltered items go into a central inbox. Some have complained that > > > > they would like a separate inbox per account; sylpheed does not do > > > > this. > > > > > > Yup why should it be any other way? Multiple accounts means > > > multiple accounts... period. What is their reason for using the > > > filters? > > > > You can create a new mailbox - File> Add mailbox. You can also create an > > account and specify the inbox. But how do you specify the path to the new > > box? The only way I've found to get mail to the new box is with filters. > > It seems like the idea is there but ... > > Exactly and I don't understand why they do this. Filters are nice and > they should be there anyway, but I can't really use the multi-inbox feature > by employing filters. > > Dumb... > > It would be my emailer of choice (I think) if they had true multiple > accounts. Anyone here follow their mailing list? > Join the sylpheed mail group and voice your complaints. I don't have a problem since I only use one account, and filtering works great for me. -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Gentoo `.0_rc5 installation
I've just completed (well complete is a relative term) the _rc5 install, so I will share the results with you. A bit of philosophy --- Warning: this is not the distro for complete newbies; you need at least a minimal understanding of system administration to get through this. Also, you must have an internet connection to do the post-install work. Your first decision is a philosophical one - to Gentoo or not to Gentoo. Unless you like tinkering with distros for the education (I do) or you are convinced that you will get a very solid system (I do so believe) from Gentoo, you may want to pass. You really only need to go through the procedure described below once, though, because Gentoo provides you with the wherewithal for keeping your distro continuously up to date (even bleeding edge, if you prefer). Gentoo is basically similar to ALFS, ie a compile-everything-from-download-on-the-fly-sources distro. After install, you have a very basic, up to date Linux system with internet connection, and you are ready to install packages to your heart's content. Gentoo uses the Portage packaging system, a system unique to Gentoo, for installing software. Each package is an "ebuild" which contains specs for downloading from an authoratative source, checking for dependancies (and automagically merging these first, if necessary), merging the package onto your running system, and providing for removal (unmerging) the software later, if needed. At every step Portage calculates md5sums to insure that you have a valid copy. Planning 1. Go to the http://www.gentoo.org site and review everything. 2. Read through the install instructions until you understand them. At present it's difficult to print them, but they are working on a printer friendly version. The instructions are almost 100% accurate. 3. From your current system(s), you need a comlete picture of the partitions you want to use (you can repartition during install) and your other existing partitions, your ethernet setup (hostname, resolv.conf, hosts contents, module name for the NIC), your kernel .config (if you want to compile a new kernel), and (preferrably) your existing XF86Config-4 file. 4. There is no fancy installer. You do everything from a standard Linux system (loaded from CDrom). 5. I recommend reiserfs for your partitions, but you may choose EXT2 if you prefer. The standard 2.4.4.9 kernel is solid with reiserfs. Installation Allocate about 3 hours for the "install" plus whatever time to download and burn the ios image. 1. Download and burn the appropriate iso image for your cpu (I used the 586 version for my K6/II). Although I have at least one distro with cdrecord support, I used windows to burn the CDrom (Easy CD Creator). 2. boot from CDrom (on my BIOS I have to specifically enable this each time, since their is no option for floppy-then CDrom-then IDE) 3. Follow the instructions to create and format your partitions. 4. Issue the commands to install the system - much of the work is done from a CHROOT Jail environment. 5. I chose to compile my own kernel, using the instructions provided, but the standard kernel will probably work for you. 6. Follow the Final Configuration instructions (this is where you need the planning data). A note: DHCP works just fine. 7. I ignored the grub instructions and switched to my reference system for updating lilo. If you like grub, use it. 8. If you are using lilo, boot your reference system, update lilo.conf, mount all your ditros referenced by lilo.conf, and issue /sbin/lilo. 9. Since I use my own kernel, I also update /etc/rc.d/config/modules (this is how Gentoo controls module loading at boot) with the following (your ethernet and sound card will differ): parport_pc lp tulip esssolo1 10. boot your new system using lilo or grub (I had to alter my bios again to remove CDrom booting, but you may not need this). Post-Install Allocate about 3 hours for the Post-Install work 1. Congratulations you just booted into Gentoo, and you have a complete non-gui Linux system with a connection to the ethernet at your disposal. If you have a pppd connection, I can't help you, since I use a local lan with cable connection to the internet. YMMV 2. You login to root with no passwd. Use passwd now to set a root user passwd. I also did ifconfig and pin www.kde.org, to veryify that my lan connection to the internet was working. You must have an intenet connection to do the post-install work. 4. Correct the one install bug now - chmod 1777 /tmp. Gentoo may have already corrected this reported bug by now. 5. adduser (see man) to add yourid in group wheel. 6. passwd yourid and set a password for the new user 3. 7. Create a /home/yourid directory and chown to yourid.wheel. Note: undocumented
Re: Redhat Tux 2.0 blows away all other webservers
On Sat, 7 Jul 2001 09:56:35 -0400 Bruce Marshall <[EMAIL PROTECTED]> wrote: > On Saturday 07 July 2001 09:00, burns wrote: > > Auyeung at Technet Systems wrote: > > > Interesting, Burns, > > > > > > Not only this article, but also your use of the Japanese fonts, > which > > > makes me wonder if you are in Japan enjoying your > vacation,watching > > > "Mikado", or eating Sushi ! > > > > Excuse me? > > > > According to my setup, I'm using "Western" encoding and "adobe > times" > > and "adobe helvetica". Unless someone else is seeing this problem, I > > think it may be on your end. > > I see the problem here.. Your posts (read in Kmail) have gone > from a > nice readable font to the 'ungodly ugly' large fonts. gee, everything looked just fine here (read in sylpheed ;) -- Myles Green Calgary AB Canada *Slackware 8.0* -- Linux Step by Step Mirror: http://linuxsteps.webjump.com/ -- Calgary Linux Users Group (CLUG): http://www.calgary.linux.ca ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
RE: Redhat Tux 2.0 blows away all other webservers
Looks like you are using a plain text font but are using Japanese (JIS) character encoding. It's actually sort-of cool looking. Shawn -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of burns Sent: Saturday, July 07, 2001 8:01 AM To: [EMAIL PROTECTED] Subject: Re: Redhat Tux 2.0 blows away all other webservers Auyeung at Technet Systems wrote: > Interesting, Burns, > > Not only this article, but also your use of the Japanese fonts, which > makes me wonder if you are in Japan enjoying your vacation,watching > "Mikado", or eating Sushi ! Excuse me? According to my setup, I'm using "Western" encoding and "adobe times" and "adobe helvetica". Unless someone else is seeing this problem, I think it may be on your end. -- burns ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
SuSe vs. Mandrake decision
Hello: I'm using a Caldera OpenLinux 2.3 system now. I never bothered to upgrade to 2.4 (deciding instead to wait for the next generation Caldera distribution which would have the latest kernel, KDE desktop, etc...). I've heard mixed reviews about the new 3.1 product and am finding my present system is getting dated, so I'm considering other distributions. I'd like to get a distribution that has all of the productivity/internet desktop stuff set up already so that I can immediately get productive without spending hours downloading things, installing them, and getting them to work. In particular, I need a good browser with JAVA support, 128-bit encryption, Adobe Acrobat, various plug-ins ,etc... already set up so that I can immediately do just about anything on the internet that I can currently do from IE in the Windows world. Although I'm a newbie currently playing with Linux as a home desktop system, I see myself eventually setting up my old P166 as a file/print server for the household. It would also host a relational database (such as MySQL ) . As a developer, I'm also interested in the development tools. I've looked at the websites for various distributions and the two new ones that have caught my eye are Suse 7.2 and Mandrake 8.0. I've seen some positive first impressions of Suse posted on mail lists, but am also looking at Mandrake because of its reputation as having very intuitive/easy install, admin tools, etc... Another issue might be availability of RPMs for new applications (are there more application RPMs developed for one distribution than for the other?) It occured to me that some of you out there may have had an opportunity to compare the two. Perhaps there are other factors I should be considering. Would anyone out there care to share their opinions/experiences? Thanks, Mel __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
On Saturday 07 July 2001 09:00, burns wrote: > Auyeung at Technet Systems wrote: > > Interesting, Burns, > > > > Not only this article, but also your use of the Japanese fonts, which > > makes me wonder if you are in Japan enjoying your vacation,watching > > "Mikado", or eating Sushi ! > > Excuse me? > > According to my setup, I'm using "Western" encoding and "adobe times" > and "adobe helvetica". Unless someone else is seeing this problem, I > think it may be on your end. Here's what's in your header References: <[EMAIL PROTECTED]> <001301c106b8$976c70a0$8001a8c0@ayw> Content-Type: text/plain; charset=ISO-2022-JP Content-Transfer-Encoding: 7bit -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 10:23 + ++ "Change is inevitable, except from a vending machine" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
On Saturday 07 July 2001 09:00, burns wrote: > Auyeung at Technet Systems wrote: > > Interesting, Burns, > > > > Not only this article, but also your use of the Japanese fonts, which > > makes me wonder if you are in Japan enjoying your vacation,watching > > "Mikado", or eating Sushi ! > > Excuse me? > > According to my setup, I'm using "Western" encoding and "adobe times" > and "adobe helvetica". Unless someone else is seeing this problem, I > think it may be on your end. I see the problem here.. Your posts (read in Kmail) have gone from a nice readable font to the 'ungodly ugly' large fonts. -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 09:55 + ++ Mrs. Weiler's Law: "Anything is dedible if it is chopped finely enough." ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Workstation 3.1, what's it all about?
On Friday 06 July 2001 22:10, Chris Kassopulo wrote: > On Fri, 6 Jul 2001 22:35:03 -0400 > > Bruce Marshall <[EMAIL PROTECTED]> wrote: > > On Friday 06 July 2001 13:15, Collins Richey wrote: > > > On Fri, 6 Jul 2001 09:03:33 -0400 Bruce Marshall <[EMAIL PROTECTED]> > > > > using a filter? > > > > > Sylpheed has had excellent filters as long as I have used it. You can > > > set up as many folders as you like and filter into them. Any > > > unfiltered items go into a central inbox. Some have complained that > > > they would like a separate inbox per account; sylpheed does not do > > > this. > > > > Yup why should it be any other way? Multiple accounts means > > multiple accounts... period. What is their reason for using the > > filters? > > You can create a new mailbox - File> Add mailbox. You can also create an > account and specify the inbox. But how do you specify the path to the new > box? The only way I've found to get mail to the new box is with filters. > It seems like the idea is there but ... Exactly and I don't understand why they do this. Filters are nice and they should be there anyway, but I can't really use the multi-inbox feature by employing filters. Dumb... It would be my emailer of choice (I think) if they had true multiple accounts. Anyone here follow their mailing list? -- ++ + Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 07/07/01 09:15 + ++ Jacobson's Law: "The less work an organization produces, the more frequently it reorganizes." ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: PCMCIA CD Burner
HI Phil, I am using an A20m, a resonably new IBM thinkpad that only really needs some more ram as I only have 64 M at the moment. I have had this machine about 6 months. I used to use a cheaper thinkpad but I am very happy with this machine, my other alternative is to change to a machine with a built in CD burner, but that is extra cost that I would hope to avoid. Thanks in advance for your help. Shane On Saturday 07 July 2001 14:11, you wrote: > On 5 Jul 2001, at 18:00, Shane A Broomhall boldly uttered: > > I am a relativley new (8 months) Linux user, who has changed across > > completely from Windows to Linux. I am using SUSE 7.1 on my IBM thinkpad > > laptop. I have had several wins (well wins for me) like with the help of > > some of the people on the SUSE list getting PCMCIA networking working, so > > I am as of a little over a month ago, I am able to back up my work and > > mail to another machine just in case my laptop gets fried. > > Which Thinkpad model are you using? > > > Phil > > > > -- > Philip J. Koenig [EMAIL PROTECTED] > Electric Kahuna Systems -- Computers & Communications for the New Millenium > > ___ > http://linux.nf -- [EMAIL PROTECTED] > Archives, Subscribe, Unsubscribe, Digest, Etc > ->http://linux.nf/mailman/listinfo/linux-users ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
Thanks to all (Mike, Mike, Dallam and The Llllama so far) for your ideas! I just woke up so it'll take me a bit to work on this. -- Tony Alfrey [EMAIL PROTECTED] "I'd rather be sailing" ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: [OT] Roadrunner Cable Access
Tom Wilson wrote: > > On Thu, 05 Jul 2001, David A. Bandel dropped these nuggets of information: > > Tom Wilson wrote: > > > I figured it was. My guess is it is their way of trying to keep people from > > > getting cable turned on at there house for Internet access then > > > pirating the cable TV. > > > > > > > Two separate companies. There was a very interesting article some time > > back (two years ago maybe) about a woman w/ internet via cable, but no > > cable TV. The TV company harrassed her and took her to court for > > stealing cable signal (she didn't even _have_ a TV). They'd disconnect > > her, the Internet folks would connect her, then the police showed up -- > > what a circus. > > That is an article I'd like to read. TV Company sounds about right. > No TV but it can still be pirated. Sheesh. It be interesting to find > out how this one turned out. > As I understand it, she won in court, go damages, and the two companies were told to correct the situation. Their "correction" was probably a M$ style correction -- you buy Internet, you must pay for Cable access (you buy hardware, you must buy an M$ OS since you'll obviously use it anyway). Ciao, David A. Bandel -- Focus on the dream, not the competition. -- Nemesis Racing Team motto ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
Auyeung at Technet Systems wrote: > Interesting, Burns, > > Not only this article, but also your use of the Japanese fonts, which > makes me wonder if you are in Japan enjoying your vacation,watching > "Mikado", or eating Sushi ! Excuse me? According to my setup, I'm using "Western" encoding and "adobe times" and "adobe helvetica". Unless someone else is seeing this problem, I think it may be on your end. -- burns ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: KurtWerks? Or does he?
On Sat, 07 Jul 2001 01:05:15 -0400 burns <[EMAIL PROTECTED]> wrote: > dep wrote: > > > On Wednesday 04 July 2001 03:39 am, Collins Richey wrote: > > > > | Hey, if Kurt doesn't mind sharing, Tin Hat would be a great name > > | for the distro you guys are planning to cook up! > > > > nah, we'd get sued by red hat -- see adobe v. kde for details. how > > about tin horn? tin ear? tintype? copper plate? lead foot? mercury > > switch? iron chef? steel magnolia? aluminum siding? carbon 14? > > How 'bout something with an Oz flair seeing as we have some Ozzie > representation amongst our charter members and they have a colourful way > with the Queen's English? > > Red Roo? > > Bitzer? > > Boomer? > > Bunyip? > > Ridgey Didge? > > Or a Penguin connection - Rock Hopper? > > Or our original designation for long-standing regular listees - Geezer? > > Someone else's turn... > I vote for "Tin Star" or "Home Brew". Of course, "Vegamite" would be a dynamite name! -- Collins Richey Denver Area Gentoo_rc5 XFCE ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: [OT] Roadrunner Cable Access
On Fri, 06 Jul 2001, you wrote: > On Thu, 5 Jul 2001 13:15:19 -0500 "Alan Bryant" wrote: > > I'm curious as to anyone here who has cable internet access through > > Roadrunner, on what services they can run? Obviously, since Doug runs a > > webserver, you can run that, but can you run an FTP server, ssh, SMTP, mail > > server, etc.? The reason I'm asking is, within a month or so, I'll be moving > > back into Austin, Texas, from out in the country since I just graduated from > > High School. I can't get anything better than 56k out here, and I'm thinking > > about getting Roadrunner once I move. HELLO: I'm from the Albany NY area and have been using RoadRunner for about 11 months with zero problems. My cost is about $42.00 per month.expensive , sure. But I can tell you nowI'll never go back to 56K. Example of cable broadband...I downloaded the new 2.4.6 kernel (about 25Megs from www.kernel.org) in 1 min. and 20 secs. Honest to God! But be forewarned.. not all sites allow such speeds. If your d'load speed at a specific site is slow.it's their fault usually ...not yours. Yes ...and pages load much faster from most sites...but again not all for the above-mentioned reasons. My adviceDon't hesitate..get broadband fron somebody. Hope this helps. Good luck. John J. Duffy .. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: kppp on valium
On Sat, 07 Jul 2001, Tony Alfrey cleverly noted: > Hi gang! > > OK, I've got a case of kppp on sedatives and I don't know where to look. > My box has a Hayes 56K ISA modem (that never runs above 28K because of > slow phone lines, but that is not the issue) with manual jumpers. > On one partition, I run Caldera LTP with kppp 2.0.0 and my connection > is fine. > Now, on another partition, I have set up SuSE 7.2 with kppp 2.0.3 and > my connection speed is about one-third of the other. I run my box on > the desktop with no network or any added sophistication. > I've carefully checked both kppp configuration files and they are > identical. Since the modem has manual jumpers, port address and IRQ > are the same for the serial ports on both distros. > SuSE 7.2 comes with something called kinternet and it is equally slow. > How can I diagnose this problem?? > Thanks to all in advance for any ideas. Check your port settings in kppp in your SuSE setup. It may be set rediculously low by default (9600) try setting it to 1152000, or at least 33600. Just a guess, HTH, Mike -- "He may look like an idiot and talk like an idiot but don't let that fool you., he really is an idiot." -Groucho Marx ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
what's happening?
Was I being hacked or was it a false alarm? I have rc.firewall.hundley and portsentry running. I noticed the most recent one is from networksolutions.com, puzzling... Jul 1 22:31:06 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.180.221.73:1099 203.198.21.135:111 L=60 S=0x00 I=31690 F=0x4000 T=51 SYN (#42) Jul 1 22:38:46 server kernel: Packet log: input REJECT ppp0 PROTO=6 195.134.35.145:2580 203.198.21.135:111 L=60 S=0x00 I=44490 F=0x4000 T=46 SYN (#42) Jul 1 23:31:56 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.178.237.174:3649 203.198.21.135:111 L=60 S=0x00 I=46517 F=0x4000 T=48 SYN (#42) Jul 2 18:08:29 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.123.202.130:4988 207.176.120.50:515 L=60 S=0x00 I=19882 F=0x4000 T=58 SYN (#42) Jul 3 21:38:35 server kernel: Packet log: input REJECT ppp0 PROTO=6 140.136.215.121:1047 168.70.138.114:515 L=60 S=0x00 I=10523 F=0x4000 T=40 SYN (#42) Jul 4 09:50:24 server kernel: Packet log: input REJECT ppp0 PROTO=6 146.96.245.5:4799 205.252.149.112:111 L=60 S=0x00 I=45070 F=0x4000 T=48 SYN (#42) Jul 4 20:03:01 server kernel: Packet log: input REJECT ppp0 PROTO=17 168.70.138.162:1037 168.70.138.168:22L=30 S=0x00 I=38152 F=0x T=127 (#42) Jul 4 22:21:08 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.227.135.24:4008 203.198.134.153:111 L=60 S=0x00 I=25023 F=0x4000 T=53 SYN (#42) Jul 5 11:34:24 server kernel: Packet log: input REJECT ppp1 PROTO=17 203.198.169.55:1378 168.70.143.74:5632 L=30 S=0x00 I=42061 F=0x T=124 (#42) Jul 5 13:54:35 server kernel: Packet log: input REJECT ppp1 PROTO=6 61.140.60.25:80 168.70.143.74:45636 L=40 S=0x00 I=14046 F=0x4000 T=52 (#42) Jul 5 18:55:49 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.128.136.98:2700 203.198.134.2:111L=60 S=0x00 I=60061 F=0x4000 T=53 SYN (#42) Jul 5 19:18:20 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.252.190.116:4196 203.198.134.2:111L=60 S=0x00 I=48301 F=0x4000 T=48 SYN (#42) Jul 6 10:12:11 server kernel: Packet log: input REJECT ppp0 PROTO=6 61.129.64.5:2927 203.198.21.185:515 L=60 S=0x00 I=34473 F=0x4000 T=51 SYN (#42) Jul 6 12:20:59 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.144.255.146:4563 203.198.21.185:111 L=60 S=0x00 I=62321 F=0x4000 T=46 SYN (#42) Jul 6 12:47:18 server kernel: Packet log: input REJECT ppp0 PROTO=6 210.180.202.200:4632 203.198.21.185:111 L=60 S=0x00 I=50939 F=0x4000 T=49 SYN (#42) Jul 6 13:50:18 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.198.228.185:2371 203.198.21.185:12345 L=48 S=0x00 I=48417 F=0x4000 T=125 SYN (#11) Jul 6 14:27:07 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.227.135.24:4608 203.198.21.185:111 L=60 S=0x00 I=60772 F=0x4000 T=53 SYN (#42) Jul 6 15:55:17 server kernel: Packet log: input REJECT ppp0 PROTO=6 194.102.253.41:3224 203.198.21.185:111 L=60 S=0x00 I=52498 F=0x4000 T=42 SYN (#42) Jul 6 18:36:04 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.0.60.2:1954 203.198.21.185:111 L=60 S=0x00 I=17002 F=0x4000 T=40 SYN (#42) Jul 7 10:24:57 server kernel: Packet log: input REJECT ppp0 PROTO=6 203.198.108.163:2738 168.70.138.6:12345 L=48 S=0x00 I=3634 F=0x4000 T=125 SYN (#11) Jul 7 17:18:17 server kernel: Packet log: input REJECT ppp0 PROTO=6 202.128.136.98:1698 203.198.134.194:111 L=60 S=0x00 I=38352 F=0x4000 T=54 SYN (#42) Jul 7 18:02:23 server kernel: Packet log: input REJECT ppp0 PROTO=6 211.105.222.13:2766 203.198.134.194:111 L=60 S=0x00 I=25843 F=0x4000 T=53 SYN (#42)
Re: kppp on valium
Hi, Once you run /sbin/ifconfig and find the MTU setting, perhaps you might try adjusting it as it is probably set to 1500 by default. This setting sometimes does not suit some isp's. I run SuSE 7.1 and found kppp/ kinternet etc to be a bit funny so I just use wvdial now. Dallam -- / / _ ---/ / (_)__ _ _ __ __ --/ / _/ / _ \/ || |\ \/ / _/ ___/ /_/ |_\___ |/_/\_\ SuSE 7.1 Kernel 2.4.0 Registered Linux User #213656 Linux is user friendly...it's just picky about its friends. __ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/ ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: OV511 (USB camera)
IIRC, you have to set it up similar to a usb hard drive/zip/ls120. This will give you the /dev/??? that corresponds to this device. You can then use some of the graphic/camera applications out there to use it. I haven't done this, but I'm just going on what I remember what I've read. If I'm wrong, please, somebody tell me. Jim On Saturday July 07, 2001 1:58 am, Mike Andrew wrote: > I am trying to set up a small usb camera under Linux. A 'puretek PT-6007' > (apparently) > > modprobe ov511 causes the following message stream in dmesg > > - > ov511.c: USB OV511 camera found > ov511.c: camera: Puretek PT-6007 > usb-uhci.c: interrupt, status 3, frame# 1622 > ov511.c: reg read: error -84 > ov511.c: i2c write: error -84 > ov511.c: write regvals: error -84 > ov511.c: failed to configure OV76xx > ov511.c: Failed to configure camera > ov511.c: ov511 driver version 1.28 registered > > > Note because of the last line, the module loads and modprobe is 'happy' > > Is this a camera problem or a beta usb problem? Are there some pointers you > folks could give me, where to go next? I have looked at > /usr/src/linux/Documentation/drivers/usb/ov511.txt, but don't want to delve > too deeply into usb source code if possible. > > What 'applications' can I use to try this device out? Skippy? -- 1:42am up 14:46, 3 users, load average: 0.00, 0.06, 0.03 Running Caldera eD2.4 - Linux - because life is too short for reboots... _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: In CNAME
On Saturday 07 July 2001 15:47, Philip J. Koenig wrote: > I assume the first RR is the first one in the zone file? IE you are > pointing the zone to an existing A record in another zone? Thanks Phil, the problem turned out to be (as Aueung perceptively noted) that I had an MX record poiinting to 'linux.nf' and you cannot do that and have cnames. But, yes, the point of the excercise was to transfer the 'authority' for the actual ip to somewhere else. -- http://linux.nf -- [EMAIL PROTECTED] _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users
Re: Redhat Tux 2.0 blows away all other webservers
Interesting, Burns, Not only this article, but also your use of the Japanese fonts, which makes me wonder if you are in Japan enjoying your vacation,watching "Mikado", or eating Sushi ! :-) Auyeung - Original Message - From: "burns" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 07, 2001 12:34 PM Subject: Redhat Tux 2.0 blows away all other webservers > OK, if there was any doubt before, let there be none now. > > A recent head-to-head test of RedHat Tux 2.0, Microsoft IIS and Apache > has yielded unbelievable results. Tux shows more than a 100 percent gain > over IIS!!! (approx. 13,000 tps vs 5,000 tps). The new 2.4 kernel and a > finely tuned high performance webserver application are credited and > have eWeek gushing about what now appears to be the fastest webserver on > the planet (at least under the test conditions). > > http://www.zdnet.com/products/stories/reviews/0,4161,2774242,00.html > > -- > burns > ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc ->http://linux.nf/mailman/listinfo/linux-users