Re: raising audio in iMovie
thanks for that suggestion; i was frustrated because i had finally edited a test video to get rid of the voiceover at the end but then couldn't get the volume to cooperate. thanks, max On Jun 6, 2012, at 8:13 PM, Blinkin wrote: Greetings, That is probably a good place to start. Make sure to be close to the mic as well. I think in the recording options there is a way to make it just pick your voice up and not the voice over. If not then just plug in some headphones when you record so there is no voice over for it to pick up at all. On Jun 6, 2012, at 7:05 PM, Maxwell Ivey wrote: Hello; thanks for that. i had found the inspector options, but raising the volume there didn't help. maybe i need to edit out the noises from voiceover first? what do you think? thanks, max On Jun 6, 2012, at 12:43 PM, Blinkin wrote: Try pressing the letter I when you are on the right clip in the clip list. This should open the inspector. From there there are a few tabs like video and audio. In the audio tab there should be some options that will help. There are also options to lower background noise or lower music volume if you have that going on also. Hope this helps. Cheers On Jun 6, 2012, at 6:54 AM, Maxwell Ivey wrote: Hello group; think i've finally got the hang of iMovie at least the part of trimming off the extra that comes from using a screen reader. my next question is how do i raise the recording volume so i don't have to shout for it to pick up my voice in a reasonable level on the recording. thanks, max -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: SPSS for Mac?
Hi, Spss especially version 19 on Windows did not work at all until IBM released a hotfix. It seems that version 20 works fine out of the box on Windows as long as you follow the guide to copy one file to get the java access bridge to work. Of course you need to know that there are special instructions to get the access bridge to work. I am looking into the Mac version now, and will report back when I have it installed. From what IBM says Voiceover is supposed to work out of the box, since there are no access bridge needed to get java to work on the Mac. Claus Den 17-09-2011 23:31, Bejarano, Rafael P. skrev: I looked into SPSS a couple of years ago, and the Mac version was no more accessible than the Windows version. The best bet, I think, is to write software to calculate whatever stats one needs (or to have someone else do so, if one does not know how to code). The Python programming language appears to be a good candidate for this purpose. Your student might get some pointers as to how to go about this by reading a recently released book. The author's name is Alan Downey, and the book is entitled Think Stats. I wish your student luck, and please do post any useful information about accessible statistical software on this list. I'm sure more than one of us would find such information useful. Cordially, Rafael Bejarano From: macvisionaries@googlegroups.com [macvisionaries@googlegroups.com] On Behalf Of Al Puzzuoli [alp...@me.com] Sent: Saturday, September 17, 2011 2:39 PM To: macvisionaries@googlegroups.com Subject: SPSS for Mac? Just wondering if anyone has ever used the Mac version of SPSS? If so, is it any more accessible than the Windows version? We have a student who is fighting with the Windows version right now. Thanks, Al -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Launch Pad
What I meant was that if you want to review the list of Apps then you need to interact to cursor up and down. At least that is what I have to do on my Lion setup . However if I type for example , Ni for nisus writer pro then I do not have to interact and pressing command down arrow will open the app without interacting. David Griffith On 7 Jun 2012, at 00:10, Ricardo Walker wrote: Hi, I'm not sure what you meant by if you start typing, you don't even have to interact. Why would you need to interact with the browser in finder at all unless, bring up the context menu for a file, app , or folder or, to do some VO command. To open the app just press command O. no interaction needed. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 6, 2012, at 5:14 PM, David Griffith daj.griff...@gmail.com wrote: It is not really a solution but I find that the shortcut Command shift A which will take me straight to the Application folder more convenient than Launchpad. I cannot see what launchpad looks like but all it appears to offer is some fancy sound affects on opening an and an inconvenient layout involving grids and pages. In contrast command shift A will simply open the application folder with all your applications in a single alphabetical list. with Finder set to column view this is a very nice interface. Of course if you start to type the name of the app you want you do not even need to interact. You will need to be on the Desktop or other Finder window for the shortcut to work. David Griffith On 4 Jun 2012, at 23:39, ROD SKENE wrote: Hi, Is there a way to alphabetize the additional apps you have installed on your Mac. The additional apps are on page two of launch pad. I would like them in alphabetical order just like the pre-installed apps on page one of launch pad. Thanks for any help. Rod -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: interacting was question for all voice over trainers: trouble interacting with items
I think sometimes we get hung up on the word interaction. I have entered this thread late but actually with screen readers on \Windows systems we often have to interact. It is not called interaction so we do not recognise it as such. For example in a Windows save as dialogue you have to tab to get to container panes where it is possible to navigate folder structures. This is interaction by another name. On web pages even with Jaws or NVDA it is often necessary to interact with an edit box before you can type into it. This is done with the enter key or space but it still interaction. Jaws has an auto mode but this will not work if you are using single letter navigation to jump between edit boxes and you will have to interact to enter text. I am glad that I use interaction with Tab key on the Mac which makes things easier and numpad commander 7 and 9 keys also makes life easier. I agree the concept needs more formal understanding on the Mac but it is present in some form on all screen reading PC Platforms I think. so I think people need to relax into the concept and recognise that it is not completely alien when you analyse it. David Griffith On 6 Jun 2012, at 21:58, Mark BurningHawk Baxter wrote: This is one way in which VO is a little bit awkward; that sometimes you have have to interact two levels down just to get to the ability to spell or phonetically sound out a word. I wish there was a spell current word, feature; I guess I could maybe set one up in one of the commanders... • Mark BurningHawk Baxter • AIM, Skype and Twitter: BurningHawk1969 • MSN: burninghawk1...@hotmail.com • My home page: • http://MarkBurningHawk.net/ -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: SPSS for Mac?
Thank you! There are a lot of people interested on this. Take care. SALUDOS, DANIELA R.T. MACNETICOS, APPLE Y ACCESIBILIDAD A TU ALCANCE. EN TWITTER: @macneticos NUESTRO BLOG EN: www.macneticus.blogspot.com Y EL PODCAST EN:` http://macneticos.libsyn.com El 07/06/2012, a las 10:43, Claus Thøgersen escribió: Hi, Spss especially version 19 on Windows did not work at all until IBM released a hotfix. It seems that version 20 works fine out of the box on Windows as long as you follow the guide to copy one file to get the java access bridge to work. Of course you need to know that there are special instructions to get the access bridge to work. I am looking into the Mac version now, and will report back when I have it installed. From what IBM says Voiceover is supposed to work out of the box, since there are no access bridge needed to get java to work on the Mac. Claus Den 17-09-2011 23:31, Bejarano, Rafael P. skrev: I looked into SPSS a couple of years ago, and the Mac version was no more accessible than the Windows version. The best bet, I think, is to write software to calculate whatever stats one needs (or to have someone else do so, if one does not know how to code). The Python programming language appears to be a good candidate for this purpose. Your student might get some pointers as to how to go about this by reading a recently released book. The author's name is Alan Downey, and the book is entitled Think Stats. I wish your student luck, and please do post any useful information about accessible statistical software on this list. I'm sure more than one of us would find such information useful. Cordially, Rafael Bejarano From: macvisionaries@googlegroups.com [macvisionaries@googlegroups.com] On Behalf Of Al Puzzuoli [alp...@me.com] Sent: Saturday, September 17, 2011 2:39 PM To: macvisionaries@googlegroups.com Subject: SPSS for Mac? Just wondering if anyone has ever used the Mac version of SPSS? If so, is it any more accessible than the Windows version? We have a student who is fighting with the Windows version right now. Thanks, Al -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Renaming Files
I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
VO getting stuck on certain webpages?
Hi all, Over the weekend I picked up a MacBook Pro, thanks in large part to the words of wisdom and advice coming from this listserv. A big thanks to everyone for just being here to help us Mac-Noobs when we're trying to figure everything out. And now for an insanely frustrating problem I'm encountering. Not sure how many (if any) of you guys are in Canada, but the CNIB has a digital library which I use regularly for reading the newspaper, and so far I've only experienced this problem on their website - not sure if the website would have anything to do with this. I've been trying to learn and use VO to get a feel for how it works and sounds, and when I went to use it to read the paper this morning, after I got to a certain section of the site - right where you choose what newspaper and everything after that I've tried - I can't get the VO cursor off of the toolbar. It will tell me I'm on the toolbar, I can try to move to the html content, but when I try to interact with the html content and/or navigate into the html content I get bounced back onto the toolbar. I also can't seem to get it out of full screen mode, so I only have about six elements (back, forward, address, google search, and downloads). I've tried everything I could think of that might be causing the problem, like playing with the web rotor, restarting VO, checking the settings, restarting Safari, but it seems that nothing has worked. Has this or anything like this happened to anyone? Is it something I'm doing or not doing (correctly or incorrectly)? Any help would be greatly appreciated! Thanks in advance, Will -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Hi Eric, Much easier than I thought. I'm so accustomed to the Save As dialog and do not see that in TextEdit or Pages. Thanks. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
iTunes sources table went away?
Hi guys, I had this weird issue yesterday. I was ,isteing to something in Itunes, fell asleep, when I awoke, the sources table was gone and the only way to get it back was to hit CMD l to go to current song. This happens now everytime I start the app. Any way of getting it back? Thanks. Matt -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: iTunes sources table went away?
Hi, Try pressing command option 1. hth Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 8:52 AM, Matt Dierckens matt.dierck...@gmail.com wrote: Hi guys, I had this weird issue yesterday. I was ,isteing to something in Itunes, fell asleep, when I awoke, the sources table was gone and the only way to get it back was to hit CMD l to go to current song. This happens now everytime I start the app. Any way of getting it back? Thanks. Matt -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: interacting was question for all voice over trainers: trouble interacting with items
Hey. good point. I never thought of it that way, but i think you're right. I also think it gets easier with practise. Blessings! Maria Joe and loving guide Karly. Email/ I Message: fb bubbygirl1...@gmail.com twitter: bubbygirl skype: bubbygirl1972 bubbygirl1...@gmail.com On 07/06/2012, at 8:31 PM, David Griffith wrote: I think sometimes we get hung up on the word interaction. I have entered this thread late but actually with screen readers on \Windows systems we often have to interact. It is not called interaction so we do not recognise it as such. For example in a Windows save as dialogue you have to tab to get to container panes where it is possible to navigate folder structures. This is interaction by another name. On web pages even with Jaws or NVDA it is often necessary to interact with an edit box before you can type into it. This is done with the enter key or space but it still interaction. Jaws has an auto mode but this will not work if you are using single letter navigation to jump between edit boxes and you will have to interact to enter text. I am glad that I use interaction with Tab key on the Mac which makes things easier and numpad commander 7 and 9 keys also makes life easier. I agree the concept needs more formal understanding on the Mac but it is present in some form on all screen reading PC Platforms I think. so I think people need to relax into the concept and recognise that it is not completely alien when you analyse it. David Griffith On 6 Jun 2012, at 21:58, Mark BurningHawk Baxter wrote: This is one way in which VO is a little bit awkward; that sometimes you have have to interact two levels down just to get to the ability to spell or phonetically sound out a word. I wish there was a spell current word, feature; I guess I could maybe set one up in one of the commanders... • Mark BurningHawk Baxter • AIM, Skype and Twitter: BurningHawk1969 • MSN: burninghawk1...@hotmail.com • My home page: • http://MarkBurningHawk.net/ -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, you should be prompted for a new file name. As a side note, I heard a lengthy conversation about Save as and duplicate on a podcast the other day. I think a lot of people miss the Save as function in Lion but instead the file is automatically saved and updated and you have to revert to get back to older versions of that file. As I understand it, this duplicate function will copy your file that you're presently editing and allow you to rename the duplicated file. I heard in this same podcast that Mountain Lion will offer a hot key (Shift-Command-S and you will be automatically placed in the title area where you can change the file name. On 6/7/12, Les Kriegler kriegle...@gmail.com wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Yes, I use the duplicate function to make copies of data sheets for different students/classes. This works well for the purpose. Although, you have to get used to not editing the original file. I suppose you could lock the file. Then, whenever you tried to edit it, you would be prompted to duplicate it or unlock it. I'll have to try this one myself. -Greg On Jun 7, 2012, at 10:15 AM, Steve Holmes wrote: I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, you should be prompted for a new file name. As a side note, I heard a lengthy conversation about Save as and duplicate on a podcast the other day. I think a lot of people miss the Save as function in Lion but instead the file is automatically saved and updated and you have to revert to get back to older versions of that file. As I understand it, this duplicate function will copy your file that you're presently editing and allow you to rename the duplicated file. I heard in this same podcast that Mountain Lion will offer a hot key (Shift-Command-S and you will be automatically placed in the title area where you can change the file name. On 6/7/12, Les Kriegler kriegle...@gmail.com wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Also, when I select duplicate from the file menu, I am not prompted for a new file name until I save or close the file. I have only used the feature in Numbers though. I can't say if it works differently in other applications. -Greg On Jun 7, 2012, at 10:15 AM, Steve Holmes wrote: I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, you should be prompted for a new file name. As a side note, I heard a lengthy conversation about Save as and duplicate on a podcast the other day. I think a lot of people miss the Save as function in Lion but instead the file is automatically saved and updated and you have to revert to get back to older versions of that file. As I understand it, this duplicate function will copy your file that you're presently editing and allow you to rename the duplicated file. I heard in this same podcast that Mountain Lion will offer a hot key (Shift-Command-S and you will be automatically placed in the title area where you can change the file name. On 6/7/12, Les Kriegler kriegle...@gmail.com wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
I wasn't sure if you could automatically rename the file right after duplicating or not; haven't used this feature much yet. I think this concept is harder to get used to when we had it the other way on other platforms for so long. You might also try dup/renaming the file in finder first and then go into the editor of your choice on the newly named file. That would protect the original file for sure. On 6/7/12, Greg Aikens gpaik...@gmail.com wrote: Also, when I select duplicate from the file menu, I am not prompted for a new file name until I save or close the file. I have only used the feature in Numbers though. I can't say if it works differently in other applications. -Greg On Jun 7, 2012, at 10:15 AM, Steve Holmes wrote: I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, you should be prompted for a new file name. As a side note, I heard a lengthy conversation about Save as and duplicate on a podcast the other day. I think a lot of people miss the Save as function in Lion but instead the file is automatically saved and updated and you have to revert to get back to older versions of that file. As I understand it, this duplicate function will copy your file that you're presently editing and allow you to rename the duplicated file. I heard in this same podcast that Mountain Lion will offer a hot key (Shift-Command-S and you will be automatically placed in the title area where you can change the file name. On 6/7/12, Les Kriegler kriegle...@gmail.com wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group,
Re: Renaming Files
Hi, What you describe of a template file, is supported. You should find a stationary check box in the get info field. Stationary, lets you open up a template document and will force you to save it under a new name without altering the original. I do not run Lion, but I am fairly certain this is supported still. Please check it out and give it a try. --Scott Yes, I use the duplicate function to make copies of data sheets for different students/classes. This works well for the purpose. Although, you have to get used to not editing the original file. I suppose you could lock the file. Then, whenever you tried to edit it, you would be prompted to duplicate it or unlock it. I'll have to try this one myself. -Greg On Jun 7, 2012, at 10:15 AM, Steve Holmes wrote: I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, you should be prompted for a new file name. As a side note, I heard a lengthy conversation about Save as and duplicate on a podcast the other day. I think a lot of people miss the Save as function in Lion but instead the file is automatically saved and updated and you have to revert to get back to older versions of that file. As I understand it, this duplicate function will copy your file that you're presently editing and allow you to rename the duplicated file. I heard in this same podcast that Mountain Lion will offer a hot key (Shift-Command-S and you will be automatically placed in the title area where you can change the file name. On 6/7/12, Les Kriegler kriegle...@gmail.com wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- --Scott -- You received this message because you are subscribed to the Google
Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it?
Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following way. 10.7.4 Version. Previously when I brought my Mac, the correct way it would say it is, Version, 10.7.4 So as you can see unless its the new way of doing things in the Get info dialog box that came out in this update, Voiceover is saying it the wrong way round. This also applys when looking at a song in iTunes. Has anyone else incounted this issue and if you fixed it what did you do? Thanks Much Daniel -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
removing items from the mac
Hello: How does one remove a program from the mac that they installed or uninstall in general? Thanks -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: removing items from the mac
Hi, go to the applications folder, navigate to the app, press command delete to send it to the trash, then press command shift delete to empty the trash. hth Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 12:17 PM, Kimsan kim...@blindaccesstraining.com wrote: Hello: How does one remove a program from the mac that they installed or uninstall in general? Thanks -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it?
I think its just the new way its being spoken. I doubt there is anything you can do about it. hth Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 11:53 AM, Daniel McGee danielmcgee...@googlemail.com wrote: Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following way. 10.7.4 Version. Previously when I brought my Mac, the correct way it would say it is, Version, 10.7.4 So as you can see unless its the new way of doing things in the Get info dialog box that came out in this update, Voiceover is saying it the wrong way round. This also applys when looking at a song in iTunes. Has anyone else incounted this issue and if you fixed it what did you do? Thanks Much Daniel -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it?
Hi, sorry, missed the end of your message. What exactly is being said the wrong way in iTunes? I couldn't finding anything. Can you give an example? Thanks. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 11:53 AM, Daniel McGee danielmcgee...@googlemail.com wrote: Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following way. 10.7.4 Version. Previously when I brought my Mac, the correct way it would say it is, Version, 10.7.4 So as you can see unless its the new way of doing things in the Get info dialog box that came out in this update, Voiceover is saying it the wrong way round. This also applys when looking at a song in iTunes. Has anyone else incounted this issue and if you fixed it what did you do? Thanks Much Daniel -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Hi, Command-Shift-S does not work for me. I m running the latest version of Lion. I'll check out the duplicate function that has been referenced. Thanks. Les On Jun 7, 2012, at 11:55 AM, Stan ZA wrote: Hi Les, Does Command ///Shift S not work. Stan ZA amista...@gmail.com On 07 Jun 2012, at 2:44 PM, Les Kriegler wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Hi Les, I have the same issue with as a trainer required to generate reports and invoices to account for every hour with every client. I started out by opening the form, filling it out, pressing command shift S and using the save as dialog to rename the form to a new name containing the invoice or report number and the client's name. The problem I ran into was that Occasionally I'd forget and press command S, saving my new invoice overtop of my blank form and forcing me to generate a new blank form. I'm not really a dope, smile. I just hate paperwork like the dickins and would fill out several at a time on autopilot instead of doing them as I went. After pooching 10 or 20 forms this way I finally got fed up and started a new system. I go into finder. When I hit on my invoice form I do a command C and a command v just like that, slap slap. That forces finder to paste a new copy of the form slightly renamed right beside the original. I then arrow to the copy, rename it with the invoice number and name, then fill out the form. Hope this helps, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 8:44 AM, Les Kriegler wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it?
Sure, example, the way it is saying it now is: Rockschool Artist use to be Artist Rockschool. Another example is the year of the track. Use to be Year 2001 now it says 2001 year. So its reading the tags the wrong way round. This is happening for me in any get info command I do it on. In iTunes on Macintosh HD any app etc. Hope this makes sense. Thanks Daniel On 7 Jun 2012, at 17:36, Ricardo Walker wrote: Hi, sorry, missed the end of your message. What exactly is being said the wrong way in iTunes? I couldn't finding anything. Can you give an example? Thanks. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 11:53 AM, Daniel McGee danielmcgee...@googlemail.com wrote: Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following way. 10.7.4 Version. Previously when I brought my Mac, the correct way it would say it is, Version, 10.7.4 So as you can see unless its the new way of doing things in the Get info dialog box that came out in this update, Voiceover is saying it the wrong way round. This also applys when looking at a song in iTunes. Has anyone else incounted this issue and if you fixed it what did you do? Thanks Much Daniel -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: instead of downloading a file, Safari is opening it and showing the code
I had a similar problem earlier this month with the PDF files I downloaded from Best Buy. One thing different from what Esther suggested was once the URL was obtained from the header with Command-L, I tried Option-Enter and that actually downloaded the file for me. In my case these were PDF's and they were named properly; not sure about your situation though. On 6/1/12, Donna Goodin doniado...@me.com wrote: Hi Esther, Unfortunately, that didn't work either. Thanks for the tip, though, I'll remember to try it if this ever happens again.. Best, Donna On Jun 1, 2012, at 1:52 PM, Esther wrote: Hi Donna, What's likely is that the file you're trying to download doesn't have a file name extension (for example, it could be a PDF file which does not have the .pdf extension as part of its name), or perhaps the server from which you are retrieving the file has not set this up for automatic download. If the files you are trying to retrieve are zip- compressed or otherwise use some archived format, then they almost always download. However, depending on how the server machine from which you retrieve the files is set up, if the file extension type is not present, or is one for which a default download action is not set up, it's likely to be treated as a text file, and simply displayed in the browaser. This is not something that you control by any settings at your end (called the client side); it is a server side setting. If the source web page was designed by someone who is not aware of these issues, then whether the file is downloaded or displayed depends on default settings of the browser version/operating system being used. Could you download the file (that was being displayed as code in Safari), by pressing Command-L to highlight the address of the downloaded file, and then pressing Return? That usually works for me if I don't want to fiddle with the link options and Control-click on the link. HTH. Cheers, Esther On Jun 1, 7:20 am, Donna Goodin doniado...@me.com wrote: Did that, no dice. What's weirder is that I was able to download it using Chrome. Donna On Jun 1, 2012, at 1:16 PM, Ricardo Walker wrote: nope. I can't say I have. At least, not that I can remember. try pressing option enter on the link to download instead. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 1, 2012, at 1:06 PM, Donna Goodin doniado...@me.com wrote: Hey all, Has anyone every seen this? I'm clicking on the link to a file I want to download, but instead of downloading it, Safari is opening it and displaying the code. Anyone know what's up? TIA, Donna -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group athttp://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group athttp://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Audio Hijack question
All, Does anyone have a tutorial or something I can listen to to learn and ins and outs of audio hijack? Can anyone walk me through the basics if not? Is it possible to run the screen recorder and audio hijack at the same time and make the video and audio match up again easily? Thanks all. cheers! -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: instead of downloading a file, Safari is opening it and showing the code
Hi Steve, I tried that, but with no luck. As someone said, it may just pertain to something about how the site is set up . Thanks for the suggestion anyway. Cheers, Donna On Jun 7, 2012, at 5:57 PM, Steve Holmes wrote: I had a similar problem earlier this month with the PDF files I downloaded from Best Buy. One thing different from what Esther suggested was once the URL was obtained from the header with Command-L, I tried Option-Enter and that actually downloaded the file for me. In my case these were PDF's and they were named properly; not sure about your situation though. On 6/1/12, Donna Goodin doniado...@me.com wrote: Hi Esther, Unfortunately, that didn't work either. Thanks for the tip, though, I'll remember to try it if this ever happens again.. Best, Donna On Jun 1, 2012, at 1:52 PM, Esther wrote: Hi Donna, What's likely is that the file you're trying to download doesn't have a file name extension (for example, it could be a PDF file which does not have the .pdf extension as part of its name), or perhaps the server from which you are retrieving the file has not set this up for automatic download. If the files you are trying to retrieve are zip- compressed or otherwise use some archived format, then they almost always download. However, depending on how the server machine from which you retrieve the files is set up, if the file extension type is not present, or is one for which a default download action is not set up, it's likely to be treated as a text file, and simply displayed in the browaser. This is not something that you control by any settings at your end (called the client side); it is a server side setting. If the source web page was designed by someone who is not aware of these issues, then whether the file is downloaded or displayed depends on default settings of the browser version/operating system being used. Could you download the file (that was being displayed as code in Safari), by pressing Command-L to highlight the address of the downloaded file, and then pressing Return? That usually works for me if I don't want to fiddle with the link options and Control-click on the link. HTH. Cheers, Esther On Jun 1, 7:20 am, Donna Goodin doniado...@me.com wrote: Did that, no dice. What's weirder is that I was able to download it using Chrome. Donna On Jun 1, 2012, at 1:16 PM, Ricardo Walker wrote: nope. I can't say I have. At least, not that I can remember. try pressing option enter on the link to download instead. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 1, 2012, at 1:06 PM, Donna Goodin doniado...@me.com wrote: Hey all, Has anyone every seen this? I'm clicking on the link to a file I want to download, but instead of downloading it, Safari is opening it and displaying the code. Anyone know what's up? TIA, Donna -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group athttp://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group athttp://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to
Re: Audio Hijack question
Hi there, I can defenetly teach you how to use audio highjack. feel free to add me to skype and I'll help you out. Skype is at the end of the signature Matt Sent from my mac Twitter: matt692 msn: matt...@live.com skype: blindman3221 On 2012-06-07, at 5:00 PM, Blinkin wrote: All, Does anyone have a tutorial or something I can listen to to learn and ins and outs of audio hijack? Can anyone walk me through the basics if not? Is it possible to run the screen recorder and audio hijack at the same time and make the video and audio match up again easily? Thanks all. cheers! -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: SPSS for Mac?
what's spss? Chris. - Original Message - From: Claus Thøgersen c.th...@gmail.com To: macvisionaries@googlegroups.com Sent: Thursday, June 07, 2012 4:43 AM Subject: Re: SPSS for Mac? Hi, Spss especially version 19 on Windows did not work at all until IBM released a hotfix. It seems that version 20 works fine out of the box on Windows as long as you follow the guide to copy one file to get the java access bridge to work. Of course you need to know that there are special instructions to get the access bridge to work. I am looking into the Mac version now, and will report back when I have it installed. From what IBM says Voiceover is supposed to work out of the box, since there are no access bridge needed to get java to work on the Mac. Claus Den 17-09-2011 23:31, Bejarano, Rafael P. skrev: I looked into SPSS a couple of years ago, and the Mac version was no more accessible than the Windows version. The best bet, I think, is to write software to calculate whatever stats one needs (or to have someone else do so, if one does not know how to code). The Python programming language appears to be a good candidate for this purpose. Your student might get some pointers as to how to go about this by reading a recently released book. The author's name is Alan Downey, and the book is entitled Think Stats. I wish your student luck, and please do post any useful information about accessible statistical software on this list. I'm sure more than one of us would find such information useful. Cordially, Rafael Bejarano From: macvisionaries@googlegroups.com [macvisionaries@googlegroups.com] On Behalf Of Al Puzzuoli [alp...@me.com] Sent: Saturday, September 17, 2011 2:39 PM To: macvisionaries@googlegroups.com Subject: SPSS for Mac? Just wondering if anyone has ever used the Mac version of SPSS? If so, is it any more accessible than the Windows version? We have a student who is fighting with the Windows version right now. Thanks, Al -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it?
Hmm, I'm not seeing this in iTunes. Its saying Name, then name of song, artist: then artist's name, etc. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 5:27 PM, Daniel McGee danielmcgee...@googlemail.com wrote: Sure, example, the way it is saying it now is: Rockschool Artist use to be Artist Rockschool. Another example is the year of the track. Use to be Year 2001 now it says 2001 year. So its reading the tags the wrong way round. This is happening for me in any get info command I do it on. In iTunes on Macintosh HD any app etc. Hope this makes sense. Thanks Daniel On 7 Jun 2012, at 17:36, Ricardo Walker wrote: Hi, sorry, missed the end of your message. What exactly is being said the wrong way in iTunes? I couldn't finding anything. Can you give an example? Thanks. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 11:53 AM, Daniel McGee danielmcgee...@googlemail.com wrote: Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following way. 10.7.4 Version. Previously when I brought my Mac, the correct way it would say it is, Version, 10.7.4 So as you can see unless its the new way of doing things in the Get info dialog box that came out in this update, Voiceover is saying it the wrong way round. This also applys when looking at a song in iTunes. Has anyone else incounted this issue and if you fixed it what did you do? Thanks Much Daniel -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: SPSS for Mac?
Hi, SPSS is a high end analytics/statistics program. You can read more about it here http://www-01.ibm.com/software/analytics/spss/ Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 7:56 PM, Christopher-Mark Gilland clgillan...@gmail.com wrote: what's spss? Chris. - Original Message - From: Claus Thøgersen c.th...@gmail.com To: macvisionaries@googlegroups.com Sent: Thursday, June 07, 2012 4:43 AM Subject: Re: SPSS for Mac? Hi, Spss especially version 19 on Windows did not work at all until IBM released a hotfix. It seems that version 20 works fine out of the box on Windows as long as you follow the guide to copy one file to get the java access bridge to work. Of course you need to know that there are special instructions to get the access bridge to work. I am looking into the Mac version now, and will report back when I have it installed. From what IBM says Voiceover is supposed to work out of the box, since there are no access bridge needed to get java to work on the Mac. Claus Den 17-09-2011 23:31, Bejarano, Rafael P. skrev: I looked into SPSS a couple of years ago, and the Mac version was no more accessible than the Windows version. The best bet, I think, is to write software to calculate whatever stats one needs (or to have someone else do so, if one does not know how to code). The Python programming language appears to be a good candidate for this purpose. Your student might get some pointers as to how to go about this by reading a recently released book. The author's name is Alan Downey, and the book is entitled Think Stats. I wish your student luck, and please do post any useful information about accessible statistical software on this list. I'm sure more than one of us would find such information useful. Cordially, Rafael Bejarano From: macvisionaries@googlegroups.com [macvisionaries@googlegroups.com] On Behalf Of Al Puzzuoli [alp...@me.com] Sent: Saturday, September 17, 2011 2:39 PM To: macvisionaries@googlegroups.com Subject: SPSS for Mac? Just wondering if anyone has ever used the Mac version of SPSS? If so, is it any more accessible than the Windows version? We have a student who is fighting with the Windows version right now. Thanks, Al -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
MBA keeps locking up/VoiceOVer static
Hi Everybody, I am using one of the newest generation models of the MacBook Air, and have been encountering a rather worrisome problem. The Air has begun to constantly overheat and lock up, necessitating a system restart each time. In addition, VoiceOVer will sometimes become highly distorted, such that it creates ear-splitting, screeching static. THis has been happening even when I have been running only one or two applications, such as Safari, and the Air is almost brand-new. Has anyone here experienced such issues, and know of any potential solutions. i'm thinking this may warrant a trip to the Apple Store, but thought I'd ask in the meantime. THanks in advance! Best, Lindsay Lindsay Yazzolino Research Assistant, Massachusetts Institute of Technology Phone: (425) 417-9239 lindsay3...@gmail.com -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: MBA keeps locking up/VoiceOVer static
Hi, If its overheating, I would definitely visit the local Apple store. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 8:41 PM, Lindsay Yazzolino lindsay3...@gmail.com wrote: Hi Everybody, I am using one of the newest generation models of the MacBook Air, and have been encountering a rather worrisome problem. The Air has begun to constantly overheat and lock up, necessitating a system restart each time. In addition, VoiceOVer will sometimes become highly distorted, such that it creates ear-splitting, screeching static. THis has been happening even when I have been running only one or two applications, such as Safari, and the Air is almost brand-new. Has anyone here experienced such issues, and know of any potential solutions. i'm thinking this may warrant a trip to the Apple Store, but thought I'd ask in the meantime. THanks in advance! Best, Lindsay Lindsay Yazzolino Research Assistant, Massachusetts Institute of Technology Phone: (425) 417-9239 lindsay3...@gmail.com -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: VO getting stuck on certain webpages?
Hi Daniel, I think that more or less solved the problem. I've at least got a way to move into the page where I want to read and/or work and can then start moving around again. One thing I noticed with this fix at least this time was that when I first tabbed into the page I had to use tab and enter to interact with the links I wanted - the VO commands didn't want to kick in. Going forward a page and then back seemed to fix that problem. Weird. Ah, the fun of playing with new computers and OS's. Much thanks for your help! Will On 07/06/2012, Daniel McGee danielmcgee...@googlemail.com wrote: Hi Will, have you tried the tab key? Sometimes, I have had times where VO doesn't automatically interact with the document so I have to go to the HTML content area interact with it and its working again. Or like I said I use the tab key to just get me into the area and then use VO navigation keys that are needed whatever I'm doing. To get this tab key working go into safari preps with command comma, go to the toolbar go to the last tab which is called advanced, make sure you interact with the toolbar 1st though select the advance tab stop interacting. Finally, VO right to you hear, press tab to highlight each item on a webpage. If this is not already checked then check it with VO space bar. Then close the window with command W. This will then save the change you made. Try your problem again and see if it resolves it. Just so you know though that what I have suggested is more of a suggestion than a fix. It works for me and I hope it does for you! Good Luck Daniel On 7 Jun 2012, at 13:14, Will Cummings wrote: Hi all, Over the weekend I picked up a MacBook Pro, thanks in large part to the words of wisdom and advice coming from this listserv. A big thanks to everyone for just being here to help us Mac-Noobs when we're trying to figure everything out. And now for an insanely frustrating problem I'm encountering. Not sure how many (if any) of you guys are in Canada, but the CNIB has a digital library which I use regularly for reading the newspaper, and so far I've only experienced this problem on their website - not sure if the website would have anything to do with this. I've been trying to learn and use VO to get a feel for how it works and sounds, and when I went to use it to read the paper this morning, after I got to a certain section of the site - right where you choose what newspaper and everything after that I've tried - I can't get the VO cursor off of the toolbar. It will tell me I'm on the toolbar, I can try to move to the html content, but when I try to interact with the html content and/or navigate into the html content I get bounced back onto the toolbar. I also can't seem to get it out of full screen mode, so I only have about six elements (back, forward, address, google search, and downloads). I've tried everything I could think of that might be causing the problem, like playing with the web rotor, restarting VO, checking the settings, restarting Safari, but it seems that nothing has worked. Has this or anything like this happened to anyone? Is it something I'm doing or not doing (correctly or incorrectly)? Any help would be greatly appreciated! Thanks in advance, Will -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Syncing Google contacts
Hi All, I just set up an MS Exchange account on my iPhone 4 running iOS 5, with the intent to sync my Google contacts with those on my iPHone. I enabled both calendar and contacts in my account settings, yet when I checked my Exchange contacts group, I noticed that only some of my contacts had appeared to sync. I checked this again after restarting my phone and nothing changed. Is there a reason why some of my contacts might sync, but not others. Is it possible that some of my contacts may be flagged differently within Google itself, preventing them from being synced? In particular, some of my newer contacts do not appear to have made it to my iPHone. My iphone is set up with iCloud, and I also have two Macs, both of which are set up to sync with iCloud and Google. I know that syncing configurations can be a bit complicated to explain, so please feel free to ask for clarification. Thanks in advance for any suggestions! Best, Lindsay Lindsay Yazzolino Research Assistant, Massachusetts Institute of Technology Phone: (425) 417-9239 lindsay3...@gmail.com -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Syncing Google contacts
Hmm, on second thought, feel free to disregard this last message. I just opened my contacts again and all of my Google contacts have flooded in, so problem solved. Sorry about the list clutter! Best, Lindsay Lindsay Yazzolino Research Assistant, Massachusetts Institute of Technology Phone: (425) 417-9239 lindsay3...@gmail.com On Jun 7, 2012, at 5:54 PM, Lindsay Yazzolino wrote: Hi All, I just set up an MS Exchange account on my iPhone 4 running iOS 5, with the intent to sync my Google contacts with those on my iPHone. I enabled both calendar and contacts in my account settings, yet when I checked my Exchange contacts group, I noticed that only some of my contacts had appeared to sync. I checked this again after restarting my phone and nothing changed. Is there a reason why some of my contacts might sync, but not others. Is it possible that some of my contacts may be flagged differently within Google itself, preventing them from being synced? In particular, some of my newer contacts do not appear to have made it to my iPHone. My iphone is set up with iCloud, and I also have two Macs, both of which are set up to sync with iCloud and Google. I know that syncing configurations can be a bit complicated to explain, so please feel free to ask for clarification. Thanks in advance for any suggestions! Best, Lindsay Lindsay Yazzolino Research Assistant, Massachusetts Institute of Technology Phone: (425) 417-9239 lindsay3...@gmail.com -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: Renaming Files
Hi Eric. That's the way I do it, too for the same reason. It's a little extra step, but it saves you from figuring out what awful thing happened and then having to try and get another version back. I've had to get a sighted person to get some further back versions before, so now I just keep doing it just like I used to with Windows. Eugenia Firth gigifi...@sbcglobal.net On Jun 7, 2012, at 12:47 PM, erik burggraaf wrote: Hi Les, I have the same issue with as a trainer required to generate reports and invoices to account for every hour with every client. I started out by opening the form, filling it out, pressing command shift S and using the save as dialog to rename the form to a new name containing the invoice or report number and the client's name. The problem I ran into was that Occasionally I'd forget and press command S, saving my new invoice overtop of my blank form and forcing me to generate a new blank form. I'm not really a dope, smile. I just hate paperwork like the dickins and would fill out several at a time on autopilot instead of doing them as I went. After pooching 10 or 20 forms this way I finally got fed up and started a new system. I go into finder. When I hit on my invoice form I do a command C and a command v just like that, slap slap. That forces finder to paste a new copy of the form slightly renamed right beside the original. I then arrow to the copy, rename it with the invoice number and name, then fill out the form. Hope this helps, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 8:44 AM, Les Kriegler wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this
RE: Renaming Files
Hello everyone. You can save a clean form as a template and stamp new ones out all day long. I do this in Numbers and I see no reason why this wouldn't work in pages as well, you just save the form as a template and create new ones based on the template. From: macvisionaries@googlegroups.com [mailto:macvisionaries@googlegroups.com] On Behalf Of Eugenia Firth Sent: Thursday, June 07, 2012 8:25 PM To: macvisionaries@googlegroups.com Subject: Re: Renaming Files Hi Eric. That's the way I do it, too for the same reason. It's a little extra step, but it saves you from figuring out what awful thing happened and then having to try and get another version back. I've had to get a sighted person to get some further back versions before, so now I just keep doing it just like I used to with Windows. Eugenia Firth gigifi...@sbcglobal.net On Jun 7, 2012, at 12:47 PM, erik burggraaf wrote: Hi Les, I have the same issue with as a trainer required to generate reports and invoices to account for every hour with every client. I started out by opening the form, filling it out, pressing command shift S and using the save as dialog to rename the form to a new name containing the invoice or report number and the client's name. The problem I ran into was that Occasionally I'd forget and press command S, saving my new invoice overtop of my blank form and forcing me to generate a new blank form. I'm not really a dope, smile. I just hate paperwork like the dickins and would fill out several at a time on autopilot instead of doing them as I went. After pooching 10 or 20 forms this way I finally got fed up and started a new system. I go into finder. When I hit on my invoice form I do a command C and a command v just like that, slap slap. That forces finder to paste a new copy of the form slightly renamed right beside the original. I then arrow to the copy, rename it with the invoice number and name, then fill out the form. Hope this helps, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com http://www.erik-burggraaf.com/ On 2012-06-07, at 8:44 AM, Les Kriegler wrote: Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I wish, and then want to save it under a different name. If I rename the original document in Finder, that won't help me here, as I want to retain the original training report, and with each report I prepare, I want to assign the client's name to the filename. Hope this makes more sense. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card transcription service, starting at $0.45 per card or $35 per hundred cards. Ebony Consulting toll-free: 1-888-255-5194 or on the web at http://www.erik-burggraaf.com http://www.erik-burggraaf.com/ On 2012-06-07, at 7:48 AM, Les Kriegler wrote: I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to reflect the consumers with whom I am working. How can this be accomplished either in the Finder, TextEdit or Pages? At present, I create a new file and paste in the text and name it that way. Thanks for the assist. Les -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To
finding other sources for GarageBand loops and importing them into GarageBand
Hello Everyone, Been playing with GarageBand over the past few months, and have been enjoying it quite a bit. I am interested in obtaining more loops/samples for GarageBand. Recently I tried a program that had lots of loops in it, but the application was not VoiceOver accessible. Any help with accessible apps, or info on obtaining loops and samples would be greatly appreciated. Thank you. On Jun 7, 2012, at 3:02 PM, macvisionaries@googlegroups.com wrote: Today's Topic Summary Group: http://groups.google.com/group/macvisionaries/topics instead of downloading a file, Safari is opening it and showing the code [1 Update] Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it? [4 Updates] Renaming Files [12 Updates] removing items from the mac [2 Updates] interacting was question for all voice over trainers: trouble interacting with items [3 Updates] iTunes sources table went away? [2 Updates] VO getting stuck on certain webpages? [2 Updates] SPSS for Mac? [2 Updates] Launch Pad [2 Updates] raising audio in iMovie [3 Updates] Organizing the mailbox list (Lion) [4 Updates] instead of downloading a file, Safari is opening it and showing the code Steve Holmes steve.holme...@gmail.com Jun 07 02:57PM -0700 I had a similar problem earlier this month with the PDF files I downloaded from Best Buy. One thing different from what Esther suggested was once the URL was obtained from the header with ...more Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it? Daniel McGee danielmcgee...@googlemail.com Jun 07 04:53PM +0100 Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following ...more Ricardo Walker rwalker...@gmail.com Jun 07 12:34PM -0400 I think its just the new way its being spoken. I doubt there is anything you can do about it. hth Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info ...more Ricardo Walker rwalker...@gmail.com Jun 07 12:36PM -0400 Hi, sorry, missed the end of your message. What exactly is being said the wrong way in iTunes? I couldn't finding anything. Can you give an example? Thanks. Ricardo Walker ...more Daniel McGee danielmcgee...@googlemail.com Jun 07 10:27PM +0100 Sure, example, the way it is saying it now is: Rockschool Artist use to be Artist Rockschool. Another example is the year of the track. Use to be Year 2001 now it says 2001 year. ...more Renaming Files Les Kriegler kriegle...@gmail.com Jun 07 07:48AM -0400 I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to ...more erik burggraaf e...@erik-burggraaf.com Jun 07 07:54AM -0400 Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card ...more Les Kriegler kriegle...@gmail.com Jun 07 08:25AM -0400 Hi Eric, Much easier than I thought. I'm so accustomed to the Save As dialog and do not see that in TextEdit or Pages. Thanks. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: ...more Les Kriegler kriegle...@gmail.com Jun 07 08:44AM -0400 Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I ...more Steve Holmes steve.holme...@gmail.com Jun 07 08:15AM -0700 I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, ...more Greg Aikens gpaik...@gmail.com Jun 07 10:24AM -0500 Yes, I use the duplicate function to make copies of data sheets for different students/classes. This works well for the purpose. Although, you have to get used to not editing the original file. ...more Greg Aikens gpaik...@gmail.com Jun 07 10:27AM -0500 Also, when I select duplicate from the file menu, I am not prompted for a new file name until I save or close the file. I have only used the feature in Numbers though. I can't say if it works ...more Steve Holmes steve.holme...@gmail.com Jun 07 08:35AM -0700 I wasn't sure if you could automatically rename the file right after duplicating or not; haven't used this feature much yet. I think this concept is harder to get used to when we had it the other ...more Scott Bresnahan b...@apple2.com Jun 07 11:49AM -0400 Hi, What you describe of a template file, is supported. You should find a
How to make a word a URL
Hey all, So I have a blog and learned how to format a word and assign a URL to it so people can click the word instead of having an entire URL there. Well I tried to put a link to my YouTube and Twitter accounts and for some reason when I click on those links it puts my website and the website I am trying to link to in the URL together. I checked when I formatted these and I know I just put the Twitter and YOuTube links but my blog is automatically inserting it's URL first. Any ideas on how to fix this? Thank you all! -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
Re: finding other sources for GarageBand loops and importing them into GarageBand
Hi, If you check amazon, you can probably still find some copies of Jam Packs for Garageband. They are no longer being made or sold by Apple but, they are still out there. Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info On Jun 7, 2012, at 10:57 PM, Jessica Carter jesjlc...@gmail.com wrote: Hello Everyone, Been playing with GarageBand over the past few months, and have been enjoying it quite a bit. I am interested in obtaining more loops/samples for GarageBand. Recently I tried a program that had lots of loops in it, but the application was not VoiceOver accessible. Any help with accessible apps, or info on obtaining loops and samples would be greatly appreciated. Thank you. On Jun 7, 2012, at 3:02 PM, macvisionaries@googlegroups.com wrote: Today's Topic Summary Group: http://groups.google.com/group/macvisionaries/topics • instead of downloading a file, Safari is opening it and showing the code [1 Update] • Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it? [4 Updates] • Renaming Files [12 Updates] • removing items from the mac [2 Updates] • interacting was question for all voice over trainers: trouble interacting with items [3 Updates] • iTunes sources table went away? [2 Updates] • VO getting stuck on certain webpages? [2 Updates] • SPSS for Mac? [2 Updates] • Launch Pad [2 Updates] • raising audio in iMovie [3 Updates] • Organizing the mailbox list (Lion) [4 Updates] instead of downloading a file, Safari is opening it and showing the code Steve Holmes steve.holme...@gmail.com Jun 07 02:57PM -0700 I had a similar problem earlier this month with the PDF files I downloaded from Best Buy. One thing different from what Esther suggested was once the URL was obtained from the header with ...more Get Info dialog is saying things the wrong way round with Voiceover on Mac OSX Lion version 7.4 how to fix it? Daniel McGee danielmcgee...@googlemail.com Jun 07 04:53PM +0100 Hi all, running Lion V7.4 I have noticed Voiceover is saying stuff the wrong way round. For example. If I command I on my Macintosh HD, and go to the latest version it will say it in the following ...more Ricardo Walker rwalker...@gmail.com Jun 07 12:34PM -0400 I think its just the new way its being spoken. I doubt there is anything you can do about it. hth Ricardo Walker rica...@appletothecore.info Twitter:@apple2thecore www.appletothecore.info ...more Ricardo Walker rwalker...@gmail.com Jun 07 12:36PM -0400 Hi, sorry, missed the end of your message. What exactly is being said the wrong way in iTunes? I couldn't finding anything. Can you give an example? Thanks. Ricardo Walker ...more Daniel McGee danielmcgee...@googlemail.com Jun 07 10:27PM +0100 Sure, example, the way it is saying it now is: Rockschool Artist use to be Artist Rockschool. Another example is the year of the track. Use to be Year 2001 now it says 2001 year. ...more Renaming Files Les Kriegler kriegle...@gmail.com Jun 07 07:48AM -0400 I work on documents in Pages and in TextEdit. I have not been able to find an easy way of renaming files. I have created report templates and when creating the reports, I want to change the names to ...more erik burggraaf e...@erik-burggraaf.com Jun 07 07:54AM -0400 Hi, In finder, press enter on the file name and you will be focussed on an edit box. Type the new name and press enter. Best, Erik Burggraaf Introducing Ebony Consulting business card ...more Les Kriegler kriegle...@gmail.com Jun 07 08:25AM -0400 Hi Eric, Much easier than I thought. I'm so accustomed to the Save As dialog and do not see that in TextEdit or Pages. Thanks. Les On Jun 7, 2012, at 7:54 AM, erik burggraaf wrote: ...more Les Kriegler kriegle...@gmail.com Jun 07 08:44AM -0400 Hi Eric, I realized that my question wasn't clear enough. I have a document called training report that I use to create my reports. I have a template with various headings, I fill in the text I ...more Steve Holmes steve.holme...@gmail.com Jun 07 08:15AM -0700 I think this is where the Duplicate file command comes in. Unfortunately, they don't have a hot key assigned to this yet but you can get there from the File submenu. When you choose that option, ...more Greg Aikens gpaik...@gmail.com Jun 07 10:24AM -0500 Yes, I use the duplicate function to make copies of data sheets for different students/classes. This works well for the purpose. Although, you have to get used to not editing the original file. ...more Greg Aikens gpaik...@gmail.com Jun 07 10:27AM -0500 Also, when I select duplicate from the file menu, I am not prompted for a new file name until I save or close the file. I have only used the feature in Numbers though. I can't
