Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 17 October 2002 3:10 am, John Richard Smith did speak unto the huddled masses, saying: My fstab has an entry like this none /proc proc defaults 0 0 none /proc/bus/usb usbdevfs defaults 0 0 but each time I boot I get an error message, mount mount mount /proc/bus/usb does not exist Clearly, it is wrong because there is a /proc/bus/usb and it contains [rootlocalhost root]# cd /proc/bus/usb [rootlocalhost usb]# ls 001/ 002/ 003/ 004/ 005/ devices drivers I should imagine the fstab entry needs adjusting, but to what ? Anyone got a clue ? What do the latest LM9.0 have for fstab entries ? well, this is not my machine with the printer, i can check that later, but i have no entries at all mentioning USB in my fstab and i have a USB memory card that works great. it is listed as a scsi. i will look at the machine with the printer and get back to you. - -- A computer without Windows is like a chocolate cake without mustard. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9ri2DBwq+ZwvIN/oRAmfnAJ0f+MXlc9FQDFOSJLRqChpWRp7DGwCffxsG 0Z3D29hy/usjpxiTgAcw2/k= =pDIf -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
shane wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 17 October 2002 3:10 am, John Richard Smith did speak unto the huddled masses, saying: My fstab has an entry like this none /proc proc defaults 0 0 none /proc/bus/usb usbdevfs defaults 0 0 but each time I boot I get an error message, mount mount mount /proc/bus/usb does not exist Clearly, it is wrong because there is a /proc/bus/usb and it contains [root@localhost root]# cd /proc/bus/usb [root@localhost usb]# ls 001/ 002/ 003/ 004/ 005/ devices drivers I should imagine the fstab entry needs adjusting, but to what ? Anyone got a clue ? What do the latest LM9.0 have for fstab entries ? well, this is not my machine with the printer, i can check that later, but i have no entries at all mentioning USB in my fstab and i have a USB memory card that works great. it is listed as a scsi. i will look at the machine with the printer and get back to you. Shane I think you may have something, I hashed the fstab line out like this #none /proc/bus/usb usbdevfs defaults 0 0 in fstab but leftnone /proc proc defaults 0 0 alone, anyone know what this line does ? I then rebooted to desktop. usb printer in there in kde-info-usb devices USB OHCI Root Hub (1) |_ Lexmark Z53 USB OHCI Root Hub (2) USB UHCI Root Hub (3) USB UHCI Root Hub (4) USB UHCI Root Hub (5) and what is more when I plugged my usb camera in in detected it automatically. USB OHCI Root Hub (2) |__!.3 DigitalCAM It seems like I don't need this none /proc/bus/usb usbdevfs defaults 0 0 line at all. Anyway I will try it like that for a while and see what happens. Just to make sure , [root@localhost root]# cd /proc/bus/usb [root@localhost usb]# ls 001/ 002/ 003/ 004/ 005/ devices drivers These are the same, and , [root@localhost root]# cat /proc/interrupts CPU0 0: 21366 XT-PIC timer 1: 26 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 37 XT-PIC usb-ohci, usb-uhci, usb-uhci, usb-uhci 8: 1 XT-PIC rtc 10:495 XT-PIC VIA 8233 Audio 11: 45 XT-PIC usb-ohci 12: 14302 XT-PIC PS/2 Mouse 14: 8745 XT-PIC ide0 15: 10 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 which has changed slightly from before ,as follows,note cpu usage, [root@localhost root]# cat /proc/interrupts CPU0 0: 629782 XT-PIC timer 1: 2173 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 21373 XT-PIC serial Gone 5: 31 XT-PIC usb-ohci, usb-uhci, usb-uhci, usb-uhci 6: 95 XT-PIC floppy 8: 3893 XT-PIC rtc 10:960 XT-PIC VIA 8233 Audio 11: 0 XT-PIC usb-ohci 12: 216470 XT-PIC PS/2 Mouse 14: 36365 XT-PIC ide0 15: 26 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
Anne Wilson wrote: My usb printer is often falling out of USB hub view, so reluctantly I have to reboot for mandrake to find it again which annoys me. There ought to be a command that would tell the OS to redetect it again, to save time and effort. John Just as a matter of interest - are these problems occurring on usb devices joined to the motherboard, to hubs, or both? Anne Well, I'm not entirely sure I understand the question. I have 8 USB ports , a bank of the usual 2 and a bank of 6, 2 are physically attatched to the mobo, ported to the rear, 6 are on a rack and cable plugged to the mobo, ported to the rear. As far as the usb hub is concerned they show up as 4 entries in the kde -info-USB devices, like so, USB OHCI Root Hub | Lexmark Z53 printer USB OHCI Root Hub USB OHCI Root Hub USB OHCI Root Hub every now and again the printer drops out of recognition and so I reboot which brings it back again, sometimes , modprobe usb-ohci in a root terminal works, sometimes it does not. This happens in M8.2 , and was the norm from first boot on M9.0 beta2 I never got any futher than that as far as the later betas are concerned. Basically USB detection of my usb printer is erratic. I suppose I should mention that the 8 usb ports on my msi mobo are both usb1 and usb2 , at least 4 of them can be usb2, I don't believe mandrake configures any of them usb2 though. Just trying to make sense of a situation where some people have big problems and others say everything's fine. Two things spring to mind, that may give us some pointers. First - the issue of ohci and uhci - it would be interesting to know, of the people who are having problems, which protocol they are using. Second - I know that under windows some devices work find on the usb ports carried from the motherboard to the backplate, but don't work reliably on a hub hung from one of those ports. I wondered if anything similar is showing up. No answers, but a few questions. Anne Well, yes, and as you can see mine are all ohci (incidentally what is the difference between ohci and uhci anyway ?) and as far as I am aware uhci never appears anywhere in my mandrake OS, but maybe others find this different. No wait a minute I've just checked up on kde-info-USB devices, and again my usb Z53 printer has vanished BUT , to prove me wrong the setup has changed, USB OHCI Root Hub (1) USB OHCI Root Hub (2) and, USB UHCI Root Hub (3) USB UHCI Root Hub (4) USB UHCI Root Hub (5) So there is a clue, there's a battle going on for recognition between ohci and uhci and something triggers a change , now lets see what modprobe usb-ohci does, [root@localhost root]# modprobe usb-ohci -v [root@localhost root]# so that does nothing this time, so lets try modprobe usb-uhci, [root@localhost root]# modprobe usb-uhci -v [root@localhost root]# so that did nothing again, I guess this means a reboot , John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
Brian Parish wrote: On Mon, 2002-10-14 at 10:22, Marcia wrote: By the way, during reinstall of LM9 I accidently lost my choice of win95 which I had already installed. I forgot how to get it back without erasing LM. What did one do again to get lilo to boot windows again? Thanks, Marcia Marcia, You need a stanza for win$ in your /etc/lilo.conf Here's an excerpt from mine: other=/dev/hda1 label=windoze table=/dev/hda image=/boot/vmlinuz label=linux After adding that, type the command lilo (as root without the quotes). Done! You'll need to edit lilo.conf as root too, or it won't let you save the new version. HTH Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Dear Brian, Thank you very much. This worked! Thanks again. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
On Sat, 12 Oct 2002 20:33:00 -0500 Linus Drouhard [EMAIL PROTECTED] wrote: I finally did the obvious and reinstalled 9.0. That fixed my printing problem. I may never know what the problem was (and really won't care as long as it doesn't happen again.) I really wanted to discover the problem and fix it rather just a clean install, but, as someone else mentioned, not having printing is a show stopper. Good luck to everyone else still struggling with printing. I'm having same trouble with Stylus Photo 810 on USB; what happen, I only discovered using WWWCups, is that for some reason at a certain point the OS doesn't see the USB device anymore and stop printing... but the work is still qeued, and I have to delete that work; after that I stop and then start again printer and the printer could start new works... but then it stops again :D Previously parallel prto didn't work, also; but with M 8.2 now is all okay... For parallel port perhaps it was only a matter of upragde. Smiley Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
Smiley wrote: On Sat, 12 Oct 2002 20:33:00 -0500 Linus Drouhard [EMAIL PROTECTED] wrote: I finally did the obvious and reinstalled 9.0. That fixed my printing problem. I may never know what the problem was (and really won't care as long as it doesn't happen again.) I really wanted to discover the problem and fix it rather just a clean install, but, as someone else mentioned, not having printing is a show stopper. Good luck to everyone else still struggling with printing. I'm having same trouble with Stylus Photo 810 on USB; what happen, I only discovered using WWWCups, is that for some reason at a certain point the OS doesn't see the USB device anymore and stop printing... but the work is still qeued, and I have to delete that work; after that I stop and then start again printer and the printer could start new works... but then it stops again :D Previously parallel prto didn't work, also; but with M 8.2 now is all okay... For parallel port perhaps it was only a matter of upragde. Smiley My usb printer is often falling out of USB hub view, so reluctantly I have to reboot for mandrake to find it again which annoys me. There ought to be a command that would tell the OS to redetect it again, to save time and effort. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
Anne Wilson wrote: On Sunday 13 Oct 2002 3:52 pm, you wrote: Smiley wrote: On Sat, 12 Oct 2002 20:33:00 -0500 Linus Drouhard [EMAIL PROTECTED] wrote: I finally did the obvious and reinstalled 9.0. That fixed my printing problem. I may never know what the problem was (and really won't care as long as it doesn't happen again.) I really wanted to discover the problem and fix it rather just a clean install, but, as someone else mentioned, not having printing is a show stopper. Good luck to everyone else still struggling with printing. I'm having same trouble with Stylus Photo 810 on USB; what happen, I only discovered using WWWCups, is that for some reason at a certain point the OS doesn't see the USB device anymore and stop printing... but the work is still qeued, and I have to delete that work; after that I stop and then start again printer and the printer could start new works... but then it stops again :D Previously parallel prto didn't work, also; but with M 8.2 now is all okay... For parallel port perhaps it was only a matter of upragde. Smiley My usb printer is often falling out of USB hub view, so reluctantly I have to reboot for mandrake to find it again which annoys me. There ought to be a command that would tell the OS to redetect it again, to save time and effort. John Just as a matter of interest - are these problems occurring on usb devices joined to the motherboard, to hubs, or both? Anne Well, I'm not entirely sure I understand the question. I have 8 USB ports , a bank of the usual 2 and a bank of 6, 2 are physically attatched to the mobo, ported to the rear, 6 are on a rack and cable plugged to the mobo, ported to the rear. As far as the usb hub is concerned they show up as 4 entries in the kde -info-USB devices, like so, USB OHCI Root Hub | Lexmark Z53 printer USB OHCI Root Hub USB OHCI Root Hub USB OHCI Root Hub every now and again the printer drops out of recognition and so I reboot which brings it back again, sometimes , modprobe usb-ohci in a root terminal works, sometimes it does not. This happens in M8.2 , and was the norm from first boot on M9.0 beta2 I never got any futher than that as far as the later betas are concerned. Basically USB detection of my usb printer is erratic. I suppose I should mention that the 8 usb ports on my msi mobo are both usb1 and usb2 , at least 4 of them can be usb2, I don't believe mandrake configures any of them usb2 though. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
Linus Drouhard wrote: I finally did the obvious and reinstalled 9.0. That fixed my printing problem. I may never know what the problem was (and really won't care as long as it doesn't happen again.) I really wanted to discover the problem and fix it rather just a clean install, but, as someone else mentioned, not having printing is a show stopper. Good luck to everyone else still struggling with printing. On Sunday 06 October 2002 08:04 pm, Linus Drouhard wrote: Wrongo! I thought I had it solved as I got a test page. That was all I got. Everything else gets stuck in queue with usb port busy error. Any ideas at all? I'm just about to dust off my 8.2 disks. It's a shame too, as there's a lot to like in 9.0. Linus On Sunday 06 October 2002 11:37 am, Linus Drouhard wrote: I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com -- -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Dear Linus, I am very happy for you that the reinstalling helped you, however it did not make a difference for me. I decided that the only way for me to get printing now was to hook up my printer as a parallel and that worked. My Hp 940c as parallel does work fine. My scanner only works with LM if it is hooked up as usb and so it will not work now. I decided to reinstall with the usb mouse instead of the ps/2 mouse and Mandrake 9 could not detect it so there is definitely a usb problem with 9 and my system. 8.2 did excellently with usb. I may go back to 8.2 or try another distro. Yes, for a small moment during an emotional relapse I considered Windows XP of all things but quickly came back to my senses. By the way, during reinstall of LM9 I accidently lost my choice of win95 which I had already installed. I forgot how to get it back without erasing LM. What did one do again to get lilo to boot windows again? Thanks for the help. I hope some work arounds or fixes are presented soon for this usb problem because I really do want to stay with Linux. Thanks, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
On Mon, 2002-10-14 at 10:22, Marcia wrote: By the way, during reinstall of LM9 I accidently lost my choice of win95 which I had already installed. I forgot how to get it back without erasing LM. What did one do again to get lilo to boot windows again? Thanks, Marcia Marcia, You need a stanza for win$ in your /etc/lilo.conf Here's an excerpt from mine: other=/dev/hda1 label=windoze table=/dev/hda image=/boot/vmlinuz label=linux After adding that, type the command lilo (as root without the quotes). Done! You'll need to edit lilo.conf as root too, or it won't let you save the new version. HTH Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!} {YES!}
I finally did the obvious and reinstalled 9.0. That fixed my printing problem. I may never know what the problem was (and really won't care as long as it doesn't happen again.) I really wanted to discover the problem and fix it rather just a clean install, but, as someone else mentioned, not having printing is a show stopper. Good luck to everyone else still struggling with printing. On Sunday 06 October 2002 08:04 pm, Linus Drouhard wrote: Wrongo! I thought I had it solved as I got a test page. That was all I got. Everything else gets stuck in queue with usb port busy error. Any ideas at all? I'm just about to dust off my 8.2 disks. It's a shame too, as there's a lot to like in 9.0. Linus On Sunday 06 October 2002 11:37 am, Linus Drouhard wrote: I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com -- -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
shane wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 07 October 2002 11:51 am, Marcia did speak unto the huddled masses, saying: related? i have no idea http://www.mandrakeforum.org/article.php?sid=2459mode=threadorder=0 aside from that all i can say is that my styles collor epson USB works fine. - -- Vini, vidi, Linux. I came, I saw, I got a real OS. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9oeKYBwq+ZwvIN/oRAtjjAJ9+IIelLYz75Q4YuRutsjXrr7O5bwCeKDHg c9NQE/WUpKtRl3OiAc3RYWY= =WCVO -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Dear Shane, Thank you for this link. I think it is related to this usb problem. When I get time I will study this. I hope we get this USB thing resolved soon. I am glad that your printer is working at least. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
Marcia, My syslog didn't have any of the errors that you reported. USB appeared to load up just fine. I can see the printer with PrinterDrake as well as USBView. Everything comes through except printouts. Apparently a whole host of problems result in similar behavior. I'll keep working on this. If you make any headway, please post. Thanks. Linus On Monday 07 October 2002 11:35 pm, Marcia wrote: On Monday 07 October 2002 09:08 pm, Linus Drouhard wrote: Ok, I tried the noapic. Same problem. My USB was working before as I was using a USB mouse. I still get USB port busy on the printer even with noapci. I switched the mouse back to PS-2. Same error printing (or trying to print). I'm just about out of ideas. Dear Linus, I guess I will not waste my time with that then. I am sorry yours is not resolved yet and I am sorry mine is not either.): I am including my syslog file because it looks like it shows some usb problems although I am no expert here so who knows. Syslog: Oct 6 13:04:54 localhost@localdomain kernel: usb.c: registered new driver usbdevfs Oct 6 13:04:54 localhost@localdomain kernel: usb.c: registered new driver hub Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002 Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: High bandwidth mode enabled Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11 Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: Detected 2 ports Oct 6 13:04:54 localhost@localdomain kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB hub found Oct 6 13:04:54 localhost@localdomain kernel: hub.c: 2 ports detected Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: Detected 2 ports Oct 6 13:04:54 localhost@localdomain kernel: usb.c: new USB bus registered, assigned bus number 2 Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB hub found Oct 6 13:04:54 localhost@localdomain kernel: hub.c: 2 ports detected Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Oct 6 13:04:54 localhost@localdomain kernel: usbdevfs: remount parameter error Oct 6 13:04:54 localhost@localdomain kernel: Adding Swap: 248968k swap-space (priority -1) Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Oct 6 13:04:54 localhost@localdomain kernel: usb_control/bulk_msg: timeout Oct 6 13:04:54 localhost@localdomain kernel: usb.c: USB device not accepting new address=2 (error=-110) Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Oct 6 13:04:54 localhost@localdomain kernel: usb_control/bulk_msg: timeout Oct 6 13:04:54 localhost@localdomain kernel: usb.c: USB device not accepting new address=3 (error=-110) Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB new device connect on bus1/2, assigned device number 4 Oct 6 13:04:54 localhost@localdomain kernel: SCSI subsystem driver Revision: 1.00 Oct 6 13:04:54 localhost@localdomain kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] Any suggestions will be appreciated. Thanks, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
Dear Linus, I tried printerdrake again and this time did the autodetect and got these messages: printerdrake cupsd (pid 1346) is running... parport_pc: Device or resource busy rmmod: module parport_probe is not loaded parport: Device or resource busy modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded For the most part the same messages you are getting. Hopefully someone will be able to help us with this. Thanks. Marcia On Sunday 06 October 2002 10:32 pm, Linus Drouhard wrote: Marcia, Run PrinterDrake through the console. You will get extra messages there that you don't get through the Mandrake Control Center. I'll bet that your getting the following messages. rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded If so, I think that we have a generic problem with Mandrake 9.0. Weird thing is, my son has almost the exact same setup that I have K7S5A MB with 1GHz Duron, Nvidia video. His works fine. Linus Oh, you missed a later message, my system is NOT fixed. Still broken. On Sunday 06 October 2002 10:01 pm, Marcia wrote: Linus Drouhard wrote: I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com -- -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I just installed LM 9 and my HP 940c usb printer will not work at all. It will not print a test page and cannot be configured with the webmin tool. It worked fine in 8.2. Any suggestions? Thanks for help in advance. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 07 October 2002 11:51 am, Marcia did speak unto the huddled masses, saying: related? i have no idea http://www.mandrakeforum.org/article.php?sid=2459mode=threadorder=0 aside from that all i can say is that my styles collor epson USB works fine. - -- Vini, vidi, Linux. I came, I saw, I got a real OS. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9oeKYBwq+ZwvIN/oRAtjjAJ9+IIelLYz75Q4YuRutsjXrr7O5bwCeKDHg c9NQE/WUpKtRl3OiAc3RYWY= =WCVO -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
On Monday 07 October 2002 09:08 pm, Linus Drouhard wrote: Ok, I tried the noapic. Same problem. My USB was working before as I was using a USB mouse. I still get USB port busy on the printer even with noapci. I switched the mouse back to PS-2. Same error printing (or trying to print). I'm just about out of ideas. Dear Linus, I guess I will not waste my time with that then. I am sorry yours is not resolved yet and I am sorry mine is not either.): I am including my syslog file because it looks like it shows some usb problems although I am no expert here so who knows. Syslog: Oct 6 13:04:54 localhost@localdomain kernel: usb.c: registered new driver usbdevfs Oct 6 13:04:54 localhost@localdomain kernel: usb.c: registered new driver hub Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002 Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: High bandwidth mode enabled Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11 Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: Detected 2 ports Oct 6 13:04:54 localhost@localdomain kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB hub found Oct 6 13:04:54 localhost@localdomain kernel: hub.c: 2 ports detected Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: Detected 2 ports Oct 6 13:04:54 localhost@localdomain kernel: usb.c: new USB bus registered, assigned bus number 2 Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB hub found Oct 6 13:04:54 localhost@localdomain kernel: hub.c: 2 ports detected Oct 6 13:04:54 localhost@localdomain kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Oct 6 13:04:54 localhost@localdomain kernel: usbdevfs: remount parameter error Oct 6 13:04:54 localhost@localdomain kernel: Adding Swap: 248968k swap-space (priority -1) Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Oct 6 13:04:54 localhost@localdomain kernel: usb_control/bulk_msg: timeout Oct 6 13:04:54 localhost@localdomain kernel: usb.c: USB device not accepting new address=2 (error=-110) Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Oct 6 13:04:54 localhost@localdomain kernel: usb_control/bulk_msg: timeout Oct 6 13:04:54 localhost@localdomain kernel: usb.c: USB device not accepting new address=3 (error=-110) Oct 6 13:04:54 localhost@localdomain kernel: hub.c: USB new device connect on bus1/2, assigned device number 4 Oct 6 13:04:54 localhost@localdomain kernel: SCSI subsystem driver Revision: 1.00 Oct 6 13:04:54 localhost@localdomain kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] Any suggestions will be appreciated. Thanks, Marcia On Monday 07 October 2002 02:37 pm, shane wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 07 October 2002 11:51 am, Marcia did speak unto the huddled masses, saying: related? i have no idea http://www.mandrakeforum.org/article.php?sid=2459mode=threadorder=0 aside from that all i can say is that my styles collor epson USB works fine. - -- Vini, vidi, Linux. I came, I saw, I got a real OS. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9oeKYBwq+ZwvIN/oRAtjjAJ9+IIelLYz75Q4YuRutsjXrr7O5bwCeKDHg c9NQE/WUpKtRl3OiAc3RYWY= =WCVO -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]
I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!] {NOT!}
Wrongo! I thought I had it solved as I got a test page. That was all I got. Everything else gets stuck in queue with usb port busy error. Any ideas at all? I'm just about to dust off my 8.2 disks. It's a shame too, as there's a lot to like in 9.0. Linus On Sunday 06 October 2002 11:37 am, Linus Drouhard wrote: I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
Linus Drouhard wrote: I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I just installed LM 9 and my HP 940c usb printer will not work at all. It will not print a test page and cannot be configured with the webmin tool. It worked fine in 8.2. Any suggestions? Thanks for help in advance. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Printer stopped working [solved!]Mine not solved!
Marcia, Run PrinterDrake through the console. You will get extra messages there that you don't get through the Mandrake Control Center. I'll bet that your getting the following messages. rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded If so, I think that we have a generic problem with Mandrake 9.0. Weird thing is, my son has almost the exact same setup that I have K7S5A MB with 1GHz Duron, Nvidia video. His works fine. Linus Oh, you missed a later message, my system is NOT fixed. Still broken. On Sunday 06 October 2002 10:01 pm, Marcia wrote: Linus Drouhard wrote: I got it working again. I had changed some of the running items through Mandroke Control center. I turned off things I didn't think I needed. Apparently I turned off too many. I restarted the ones that I had stoppled and printerdrake started and ran just fine. Thanks for all the suggestions. On Saturday 05 October 2002 11:00 am, Chris Edwards wrote: Visit http://www.linuxprinting.org They probably have a solution for you. [EMAIL PROTECTED] wrote: Hi Linus, I have the same problem. The instal actually detected my printer and printed a test page, but haven't worked since. I tried deleting the printer, but then I couldn't get printerdrake to work. Any help I can get on how to properly add and configure my printer is appreciated. I have an Epson Stylus Color 740 connected to the USB port. Mike K. --- Linus Drouhard [EMAIL PROTECTED] wrote: Hi all, I have an Espon Stylus 777 that was working fine until a couple of days ago. I recently installed Mandrake 9.0. I think that the printer worked under 9.0, but I'm not sure It worked great under 8.2 and it still works fine with Windows (as much as I hate to admit it). Anyway, I'm getting the following message in CUPS administration Printer State: processing, accepting jobs. USB port busy; will retry in 30 seconds... Device URI: usb:/dev/usb/lp0 Printerdrake cannot see the printer at all. KDE Control panel printer configuration utility can see the printer, but still can't print. I get the same error. I tried PrinterDrake from command line. It gave me the error... [root@localhost linus]# printerdrake cupsd (pid 1496) is running... WARNING: pinging broadcast address WARNING: pinging broadcast address rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded WARNING: pinging broadcast address ...could not find printer. the module parport is loaded, but why does that matter as I'm using a USB printer. Any help, insights, or just plain sympathy is welcomed. Thanks, Linus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos More http://faith.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I just installed LM 9 and my HP 940c usb printer will not work at all. It will not print a test page and cannot be configured with the webmin tool. It worked fine in 8.2. Any suggestions? Thanks for help in advance. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com