Re: [newbie] USB Printer : HP 3550 Problem
Helloz I guess cups is working fine: http://www.geocities.com/robertoramsis/CUPS_jobs.jpg all jobs are completed but the printer never pulls a paper. whenever i try to restart a job it gives me http://www.geocities.com/robertoramsis/Restart.jpg By the way when i make lsusb this is what i get : Bus 004 Device 001: ID : Bus 003 Device 002: ID 03f0:7304 Hewlett-Packard Bus 003 Device 001: ID : Bus 002 Device 001: ID : Bus 001 Device 001: ID : Thanks soo much Byes --- SnapafunFrank [EMAIL PROTECTED] wrote: Roberto Ramsis wrote: *Hello everyone* I have MDK 10.0,it autodetected my usb printer HP deskjet 3550 so fine ,but whenever i print: the printer never responds ,when i check the cups log it says these jobs have been completed though the printer never even tried to pull the paper.I checked the port it works fine and cups is running too. Another thing i'm getting is some sort of a warning msg on boot ,cant read all of it but i GUESS it says Warning : CUPS may not work properly.Couldnt mount loopback device to routing table!? Thanks so much Bye Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://us.rd.yahoo.com/evt=31637/*http://smallbusiness.yahoo.com/resources/ Just to start things off ~ within a new browser window type localhost:631 ( without the quotes ) and have a play in there. You usually sign in as root and you need the admin password to be able to configure things properly. -- Newbie Seeking USER_FUNCTIONALITY always! Regards SnapafunFrank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 __ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] USB Printer : HP 3550 Problem
Il ven, 2005-03-18 alle 14:32, Roberto Ramsis ha scritto: Helloz I guess cups is working fine: http://www.geocities.com/robertoramsis/CUPS_jobs.jpg all jobs are completed but the printer never pulls a paper. whenever i try to restart a job it gives me http://www.geocities.com/robertoramsis/Restart.jpg By the way when i make lsusb this is what i get : Bus 004 Device 001: ID : Bus 003 Device 002: ID 03f0:7304 Hewlett-Packard Bus 003 Device 001: ID : Bus 002 Device 001: ID : Bus 001 Device 001: ID : Hp Linux support site : http://hpinkjet.sourceforge.net/productssupported.php tell that HP Deskjet 3550 USB printer has full support with the new HPLIP driver , so go to the install page http://hpinkjet.sourceforge.net/install.php and follow the instructions. Other resources : http://hpinkjet.sourceforge.net/ http://hpinkjet.sourceforge.net/faqs.php http://sourceforge.net/forum/forum.php?forum_id=53438max_rows=60style=threaded http://sourceforge.net/forum/forum.php?forum_id=426789max_rows=60style=threaded http://sourceforge.net/forum/forum.php?forum_id=53439max_rows=60style=threaded http://sourceforge.net/mail/?group_id=16846 Cooker packages http://rpm.pbone.net/index.php3?stat=3limit=1srodzaj=4dl=75search=hplip*586dist[]=34 http://rpm.pbone.net/index.php3/stat/4/idpl/1694403/com/hplip-0.8.8-4mdk.i586.rpm.html http://rpm.pbone.net/index.php3/stat/4/idpl/1694404/com/hplip-hpijs-0.8.8-4mdk.i586.rpm.html http://rpm.pbone.net/index.php3/stat/4/idpl/1694405/com/hplip-hpijs-ppds-0.8.8-4mdk.i586.rpm.html http://rpm.pbone.net/index.php3/stat/4/idpl/1694406/com/hplip-model-data-0.8.8-4mdk.i586.rpm.html Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] USB Printer : HP 3550 Problem
Roberto Ramsis wrote: *Hello everyone* I have MDK 10.0,it autodetected my usb printer HP deskjet 3550 so fine ,but whenever i print: the printer never responds ,when i check the cups log it says these jobs have been completed though the printer never even tried to pull the paper.I checked the port it works fine and cups is running too. Another thing i'm getting is some sort of a warning msg on boot ,cant read all of it but i GUESS it says Warning : CUPS may not work properly.Couldnt mount loopback device to routing table!? Thanks so much Bye Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://us.rd.yahoo.com/evt=31637/*http://smallbusiness.yahoo.com/resources/ Just to start things off ~ within a new browser window type localhost:631 ( without the quotes ) and have a play in there. You usually sign in as root and you need the admin password to be able to configure things properly. -- Newbie Seeking USER_FUNCTIONALITY always! Regards SnapafunFrank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] USB Printer : HP 3550 Problem
Hello everyone I have MDK 10.0,it autodetected my usb printer HP deskjet 3550 so fine ,but whenever i print: the printer never responds ,when i check the cups log it says these jobs have been completed though the printer never even tried to pull the paper.I checked the port it works fine and cups is running too. Another thingi'm getting is some sort of a warning msg on boot ,cant read all of it but iGUESS it says Warning : CUPS may not work properly.Couldnt mount loopback device to routing table!? Thanks so much Bye Do you Yahoo!? Yahoo! Small Business - Try our new resources site!
[newbie] USB printer woes part 2 (was Re: For all with usb problems)
Uytkownik Stew Benedict napisa: On Thu, 28 Oct 2004, Anne Wilson wrote: From the Expert list: quote 10.1 official updates are slated to be released Nov 1. I see a kdebase 133.1.101mdk in that tree (not publically accessible). /quote But... I see people saying they have problems even at runlevel 3 and with different window managers, so I can't really imagine kdebase has much to with it. Unfortunately that seems to be the case: System hangs at startup during loading kernel module for USB printer (HP920C) Mandrake 10.1 CE hangs at startup (init level 3 or 5) if I have my USB printer plugged in. What's strange is that you can later plug in the printer, and the printer works. To reproduce this bug: 1) Install/upgrade to Mandrake 10.1 CE 2) Start the system (with or without GUI) 3) The system hangs at loading kernel module for USB printer I think it is udev, so I'll report it as such to Cooker Bugzilla. Disappointed, Wojciech Podgrni smime.p7s Description: S/MIME Cryptographic Signature
[newbie] USB Printer
Hi All, I have a USB Printer and I want to know if it is: /dev/usblp0 /dev/usblp1 /dev/usb/lp0 /dev/usb/lp1 It worked when I installed MK9.1 (sort of). The color was really light so I messed with them but still no good. So I installed TurboPrint (decided to just go that route), but now nothing can see my printer. I followed all their howtos (at least I think I did) but still no go. Anyone have a clue? Please don't ask me to uninstall CUPS, the last time I did that I destroyed KDE. Don't ask cause I don't know - Just chalk it up to talent. Thanks Russ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb printer probs in 9.0?
On Monday 07 Oct 2002 7:48 pm, you wrote: On Mon, 7 Oct 2002 19:24:45 +0100 Anne Wilson [EMAIL PROTECTED] wrote: It's alarming me, though. Marcia can't get her DeskJet 940 going. I have a 990 which should be the same but I'm waiting for my ordered disks to arrive. I just hope this is sorted before I start my install. A system without printing is no good to me. Well, both appear to be, although not necessarily by the Mandrake setup (not sure what drivers it uses): http://hpinkjet.sourceforge.net/productssupported.php Alastair (Lexmark Z42 sitting on a top shelf :) We both had our printers working under 8.2. I'll watch the threads to see if more help arrives, but so far there are still probs. Anne Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb printer probs in 9.0?
- Original Message - From: Linus Drouhard [EMAIL PROTECTED] Date: Sun, 6 Oct 2002 20:00:30 -0500 To: [EMAIL PROTECTED] Subject: Re: [newbie] usb printer probs in 9.0? I have been having problems with printers in general with 9.0. I have a Stylus 777 (Epson) connected through USB. Sometimes PrinterDrake can find it, other times not. I've successfully printed two test pages. That's all. The rest of the time it gets stuck and I get the message usb port busy...will retry in 30 seconds well, the pages never come out. Deleting and reinstalling the printer has only worked once. I tried an old HP Laser Jet with my parallel port. I've had one test page print, and it took 20 minutes or more before it came out. Otherwise, same similar problem to Espon. Right now I have no working printers and am just about ready to go back to 8.2. Linus ## Hi Linus, I wonder if these problems are very common? I can't recall reading of any particular problems with printing from any of the beta testers on here. I have my Epson Stylus Color 480SXU working under 9.0, after a bit of struggle, and it seems to be OK right now. It gave me no problems under 8.2 at all. I'm a newbie to Linux, and it is hard to keep from getting frustrated with challenges. I like Mdk a lot though, and I'm going to keep at learning Linux. I am starting to get to the point where I can sort out some of the little challenges, thanks to this list, and others, where ppl are kind enough to share their knowledge w/learners like me. :) As long as you're having funthat's the main thing! Good luck to you Linus! --Angus PS. You have a great name for a Linux user. ;-) This is the Earth School..always in session. Now is the right time to learn, and teach.--A.A. -- __ Download the FREE Opera browser at www.opera.com/download/ Free OperaMail at http://www.operamail.com/ Powered by Outblaze Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb printer probs in 9.0?
On Monday 07 Oct 2002 7:11 pm, you wrote: - Original Message - From: Linus Drouhard [EMAIL PROTECTED] Date: Sun, 6 Oct 2002 20:00:30 -0500 To: [EMAIL PROTECTED] Subject: Re: [newbie] usb printer probs in 9.0? I have been having problems with printers in general with 9.0. I have a Stylus 777 (Epson) connected through USB. Sometimes PrinterDrake can find it, other times not. I've successfully printed two test pages. That's all. The rest of the time it gets stuck and I get the message usb port busy...will retry in 30 seconds well, the pages never come out. Deleting and reinstalling the printer has only worked once. I tried an old HP Laser Jet with my parallel port. I've had one test page print, and it took 20 minutes or more before it came out. Otherwise, same similar problem to Espon. Right now I have no working printers and am just about ready to go back to 8.2. Linus ## Hi Linus, I wonder if these problems are very common? I can't recall reading of any particular problems with printing from any of the beta testers on here. It's alarming me, though. Marcia can't get her DeskJet 940 going. I have a 990 which should be the same but I'm waiting for my ordered disks to arrive. I just hope this is sorted before I start my install. A system without printing is no good to me. Anne Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb printer probs in 9.0?
On Mon, 7 Oct 2002 19:24:45 +0100 Anne Wilson [EMAIL PROTECTED] wrote: It's alarming me, though. Marcia can't get her DeskJet 940 going. I have a 990 which should be the same but I'm waiting for my ordered disks to arrive. I just hope this is sorted before I start my install. A system without printing is no good to me. Well, both appear to be, although not necessarily by the Mandrake setup (not sure what drivers it uses): http://hpinkjet.sourceforge.net/productssupported.php Alastair (Lexmark Z42 sitting on a top shelf :) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb printer probs in 9.0?
Greetings everyone, I am having a problem trying to configure my Epson Stylus Color 480SXU in Mdk 9.0. This printer wasn't detected during install of 9.0, but it is showing correctly in MCC. When I try to configure with PrinterDrake, I go through the wizard process, and all seems OK till I try to test the driver and get asked for a password: The access to the requested resource on the CUPS server running on localhost (port 631) requires a password. So, I then enter my user passwordthat's not good enough. I then try my root password, it chews on that for quite a while, during which I get a bit of erratic window behaviour, then it refuses my root password too. What does PrinterDrake want?? I click on Finish and get this error: An error occurred while retrieving the printer list: client-error-not-found. Why isn't my printer being found? The 480SXU is a usb only printer, and it's listed on the Mdk hardware site as being perfectly compatible w/9.0. It worked perfect for me under 8.2. It doesn't seem to be detected during boot. usb is loaded but the printer isn't detected. Anyone have any ideas? TIA for anything. - I got my printer configured and working. I tried unplugging the usb cable from the computer port and plugging it back in.that didn't help, but I tried plugging it into my other usb port...presto! I was able to configure the printer w/PrinterDrake, and it is now functioning OK. I wonder why the first port was not acceptable?? It was working there in Mdk 8.2. Seems strange that the installer didn't offer to configure my printer :-/ It works now anyway. ;-) --Angus This is the Earth School..always in session. Now is the right time to learn, and teach.--A.A. -- __ Download the FREE Opera browser at www.opera.com/download/ Free OperaMail at http://www.operamail.com/ Powered by Outblaze Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb printer probs in 9.0?
I have been having problems with printers in general with 9.0. I have a Stylus 777 (Epson) connected through USB. Sometimes PrinterDrake can find it, other times not. I've successfully printed two test pages. That's all. The rest of the time it gets stuck and I get the message usb port busy...will retry in 30 seconds well, the pages never come out. Deleting and reinstalling the printer has only worked once. I tried an old HP Laser Jet with my parallel port. I've had one test page print, and it took 20 minutes or more before it came out. Otherwise, same similar problem to Espon. Right now I have no working printers and am just about ready to go back to 8.2. Linus On Sunday 06 October 2002 08:59 am, Angus Auld wrote: Greetings everyone, I am having a problem trying to configure my Epson Stylus Color 480SXU in Mdk 9.0. This printer wasn't detected during install of 9.0, but it is showing correctly in MCC. When I try to configure with PrinterDrake, I go through the wizard process, and all seems OK till I try to test the driver and get asked for a password: The access to the requested resource on the CUPS server running on localhost (port 631) requires a password. So, I then enter my user passwordthat's not good enough. I then try my root password, it chews on that for quite a while, during which I get a bit of erratic window behaviour, then it refuses my root password too. What does PrinterDrake want?? I click on Finish and get this error: An error occurred while retrieving the printer list: client-error-not-found. Why isn't my printer being found? The 480SXU is a usb only printer, and it's listed on the Mdk hardware site as being perfectly compatible w/9.0. It worked perfect for me under 8.2. It doesn't seem to be detected during boot. usb is loaded but the printer isn't detected. Anyone have any ideas? TIA for anything. - I got my printer configured and working. I tried unplugging the usb cable from the computer port and plugging it back in.that didn't help, but I tried plugging it into my other usb port...presto! I was able to configure the printer w/PrinterDrake, and it is now functioning OK. I wonder why the first port was not acceptable?? It was working there in Mdk 8.2. Seems strange that the installer didn't offer to configure my printer :-/ It works now anyway. ;-) --Angus This is the Earth School..always in session. Now is the right time to learn, and teach.--A.A. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] USB Printer detection
Mandrake8.2 easily detected my Z53 usb printer:- lspcidrake unknown : VIA Technologies|VT8367 [KT266] unknown : VIA Technologies|VT8367 [KT266 AGP] usb-ohci: NEC|USB usb-ohci: NEC|USB ehci-hcd: NEC Corporation|PCI to USB Enhanced Host Controller unknown : VIA Technologies|VT8233 PCI to ISA Bridge unknown : VIA Technologies|VT82C586 IDE [Apollo] usb-uhci: VIA Technologies|VT82C586B USB usb-uhci: VIA Technologies|VT82C586B USB usb-uhci: VIA Technologies|VT82C586B USB unknown : VIA Technologies|VT8233 [AC97 Audio Controller] Card:NVIDIA GeForce3 (generic): nVidia Corporation|GeForce3 (rev 1) unknown : Virtual|Hub [] unknown : Virtual|Hub [] unknown : Virtual|Hub [] unknown : Virtual|Hub [] unknown : Virtual|Hub [] - unknown : Lexmark|Lexmark Z53 [Printer|Printer|Bidirectional] - but Mandrake 9.0 , lspcidrake unknown : VIA Technologies|VT8367 [KT266] unknown : VIA Technologies|VT8367 [KT266 AGP] usb-ohci: NEC|USB usb-ohci: NEC|USB ehci-hcd: NEC Corporation|PCI to USB Enhanced Host Controller unknown : VIA Technologies|VT8233 PCI to ISA Bridge unknown : VIA Technologies|VT82C586 IDE [Apollo] usb-uhci: VIA Technologies|VT82C586B USB usb-uhci: VIA Technologies|VT82C586B USB usb-uhci: VIA Technologies|VT82C586B USB snd-via8233 : VIA Technologies|VT8233 [AC97 Audio Controller] Card:NVIDIA GeForce3 (generic): nVidia Corporation|GeForce3 (rev 1) unknown : Virtual|Hub [] unknown : Virtual|Hub [] unknown : Virtual|Hub [] nothing at all, M8.2, cat /proc/interrupts CPU0 0:2659158 XT-PIC timer 1: 42 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 15566122 XT-PIC serial 5: 25 XT-PIC usb-ohci, usb-uhci, usb-uhci, usb-uhci -(4 no.) 8: 1 XT-PIC rtc 10:658 XT-PIC VIA 8233 Audio 11: 0 XT-PIC usb-ohci 12: 52882 XT-PIC PS/2 Mouse 14: 69871 XT-PIC ide0 15: 10 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 whereas M9.0, [root@localhost root]# cat /proc/interrupts CPU0 0: 302815IO-APIC-edge timer 1:694IO-APIC-edge keyboard 2: 0 XT-PIC cascade 5: 0 IO-APIC-level usb-uhci, usb-uhci, usb-uhci --(3 no.) 6:156IO-APIC-edge floppy 8: 1IO-APIC-edge rtc 10: 3628 IO-APIC-level VIA8233 12: 242382IO-APIC-edge PS/2 Mouse 14: 33076IO-APIC-edge ide0 15: 11IO-APIC-edge ide1 NMI: 0 LOC: 302780 ERR: 0 MIS: 0 Now I actually have 8 USB Ports, that is 4 usb1, 4 usb2. all 8 can be recognised as at least usb1. Any suggestions as to what I can do to get my LexmarkZ53 USB printer recognised. It used to show up in kde control center in M8.2, but not in M9.0 thanks, John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] USB printer
Hi, My mail server is setup to stop open relay. So I need to supply a password before sending mail through SMTP. In KMail there's no option that I supply a password before sending mail. I only can retrieve mail via POP but cannot send. Does anyone know if there's a fix to this? Or is there an another email client I can use with support this feature? Thanks, Norman Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] USB printer
Hi, Sorry I posted the wrong question on my last thread. LM 8.2 detects my HP2200D USB printer during installation. But I cannot send print jobs to the printer, not even the test page. Does anyone know how to troubleshoot this. I tried LPR, CUPS. But nothing went through. Thanks, Norman Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] USB Printer
Does USB Printer Xerox Docuprint P8xe works on Mandrake 7.2? Saravut Teepprasan http://www.digitaltophoto.com
Re: [newbie] USB Printer
Probably, there is an entry "Docuprint P8e" in the model list, and in addition USB printing is supported by Mandrake 7.2 (I use a DeskJet 840C with USB connection). The Docuprint P8e is compatible to the HP LaserJet 4 series (uses the "ljet4" driver of GhostScript). So probably also the GIMP-Print drivers for 600-dpi LaserJets would work. Till Saravut Teepprasan wrote: Does USB Printer Xerox Docuprint P8xe works on Mandrake 7.2? Saravut Teepprasan http://www.digitaltophoto.com
[newbie] USB Printer
Hi, I'm trying to find some information about USB printers (HPs printer specialy). Does anyone knows where to find such information Thanks you PS: by the way, does anyone tryed the HP 6300C scanners series on Linux??
Re: [newbie] USB printer?
I don't have a usb printer, however if it is setup on lp0 etc... then all you should have to do is load the drivers for it. su to root type printtool select "add" and follow the directions. Also does the kernel usb drivers directly support your particular printer or is that just the generic usb support that is detecting something on the usb port? John -- Original Message -- From: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] Date: Mon, 24 Apr 2000 08:29:46 -0500 Has anyone gotten a usb printer to work under 7.0? I have upgraded to 2.3.99-pre5 and I get a messae in the kernel log that it sees the usb hardware but I am yet to get the printer to function. Any help?
[newbie] USB printer?
Has anyone gotten a usb printer to work under 7.0? I have upgraded to 2.3.99-pre5 and I get a messae in the kernel log that it sees the usb hardware but I am yet to get the printer to function. Any help?
[newbie] USB printer
Hello, I've got an Epson 740 printer that I'm currently using on my parallel port and I would like to configure it to use the USB port as it supports both. I know there is kernel support in the latest kernel, I'm just not sure how to make the connections. Right now I'm using /dev/lp0 for my parallel port, however I don't see 'usb' under the /dev tree. What's my next step? Thanks so much! Mike -- Michael Holt [EMAIL PROTECTED]
