Re: [newbie] Scanner
On Sat, 25 Dec 1999, Alejandro Arredondo wrote: Hello Everybody, I have an HP ScanJet 3200C. How can I make it work with Linux? Paralell or SCSI? If the former, forget it. If the latter, it very well may work. There is almost NO support for Paralell printers under Linux. John
Re: [newbie] Scanner
Printers or scanners? Scanners I hope you meant. B. B. John Aldrich wrote: On Sat, 25 Dec 1999, Alejandro Arredondo wrote: Hello Everybody, I have an HP ScanJet 3200C. How can I make it work with Linux? Paralell or SCSI? If the former, forget it. If the latter, it very well may work. There is almost NO support for Paralell printers under Linux. John
Re: [newbie] Scanner
On Sat, 25 Dec 1999, Toyswins wrote: Printers or scanners? Scanners I hope you meant. DOH! Yep. You're right. :-) I mis-typed. :-) John
Re: [newbie] Scanner
On Sat, 25 Dec 1999, John Aldrich wrote: | On Sat, 25 Dec 1999, Alejandro Arredondo wrote: | Hello Everybody, | | I have an HP ScanJet 3200C. How can I make it work with Linux? | | Paralell or SCSI? If the former, forget it. If the latter, it very | well may work. There is almost NO support for Paralell printers under | Linux. | John I have a HP DeskJet 500 bw printer attached to my LPT1 (DOS) paralell port. It was detected and installed wothout a wrinkle. Now I must admit that this is an older printer, but it is still a paralell printer, so there are at least some that work ok. Ernie ([EMAIL PROTECTED])
Re: [newbie] Scanner
On Mon, 22 Nov 1999, you wrote: The sane-mustek.5 notes say: "The only non-SCSI scanner that has some support at this point is the 600 11N scanner which comes with its own parallel port adapter (i.e., it does not attach to the printer port)." I guess "some support"= not very much since I can't find the files needed. She who must be obeyed says it's my present scanner or nothing! Ahh...well, guess you'll have to dual-boot or something to get it working. :-( John
Re: [newbie] Scanner
On Sat, 20 Nov 1999, you wrote: Sorry, John, parallel. How's this from the SANE-mustek.5 notes: "Note that this scanner comes with its own ISA card that implements a funky parallel port (in other words the scanner is not connected to the printer parallel port. The code present in this release has not been tested so proceed at your own risk! Be prepared to pull the scanner cable on short notice in case the situation grows dangerous and/or noisy." Talk about a beta release. Maybe that's why I can't find any files. Anyway, I'm prepared to have a go if I can find a way. Another reason not to use Windoze. Paralell is not generally supported under Linux for scanners. I've seen ONE post that has indicated that there is limited support for paralell port scanners under Linux. You'd have a LOT better luck getting a SCSI scanner (although those can be hard to find these days!) John
Re: [newbie] Scanner
John Aldrich wrote: On Sat, 20 Nov 1999, you wrote: Sorry, John, parallel. How's this from the SANE-mustek.5 notes: "Note that this scanner comes with its own ISA card that implements a funky parallel port (in other words the scanner is not connected to the printer parallel port. The code present in this release has not been tested so proceed at your own risk! Be prepared to pull the scanner cable on short notice in case the situation grows dangerous and/or noisy." Talk about a beta release. Maybe that's why I can't find any files. Anyway, I'm prepared to have a go if I can find a way. Another reason not to use Windoze. Paralell is not generally supported under Linux for scanners. I've seen ONE post that has indicated that there is limited support for paralell port scanners under Linux. You'd have a LOT better luck getting a SCSI scanner (although those can be hard to find these days!) John John, The sane-mustek.5 notes say: "The only non-SCSI scanner that has some support at this point is the 600 11N scanner which comes with its own parallel port adapter (i.e., it does not attach to the printer port)." I guess "some support"= not very much since I can't find the files needed. She who must be obeyed says it's my present scanner or nothing! Thanks. -- Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
[newbie] Scanner
Hello List, I am trying to get my Mustek 60011N scanner to work. I have installed SANE on initial install (and Kpackage confirms) and have printed the notes on how to configure, build and install SANE as well as sane-mustek 5, which I printed when I was running Caldera2.2. Problem is the files which should be in /usr/local/lib/, /usr/local//etc/sane.d/ and /usr/local/man/ do not exist. GIMP cannot see the scanner. Can anyone tell me what to do from here ( to get my scanner working, that is ), please? TIA. -- Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Re: [newbie] Scanner
John Aldrich wrote: On Sat, 20 Nov 1999, you wrote: Hello List, I am trying to get my Mustek 60011N scanner to work. I have installed SANE on initial install (and Kpackage confirms) and have printed the notes on how to configure, build and install SANE as well as sane-mustek 5, which I printed when I was running Caldera2.2. Problem is the files which should be in /usr/local/lib/, /usr/local//etc/sane.d/ and /usr/local/man/ do not exist. GIMP cannot see the scanner. Can anyone tell me what to do from here ( to get my scanner working, that is ), please? SCSI or Paralell? John Sorry, John, parallel. How's this from the SANE-mustek.5 notes: "Note that this scanner comes with its own ISA card that implements a funky parallel port (in other words the scanner is not connected to the printer parallel port. The code present in this release has not been tested so proceed at your own risk! Be prepared to pull the scanner cable on short notice in case the situation grows dangerous and/or noisy." Talk about a beta release. Maybe that's why I can't find any files. Anyway, I'm prepared to have a go if I can find a way. Another reason not to use Windoze. Regards. -- Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Re: [newbie] scanner
Thanks for the sugestion about the SANE website. I downloaded SANE however, after configuring it ( I guess I did not do it right) it does not work. Does any body know the steps to follow? I tried both ways: SANE 1.01 rpm and the tar version. My scanner is a Mustek 600 CP (parallel).
Re: [newbie] scanner
I have one of those also, and according to the supported hardware lists. It is not on any of them. It looks like about the only scanners supported so far are scsi. Lyndon Lininger Sr. - Original Message - From: J. Marrero [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, May 21, 1999 6:55 PM Subject: Re: [newbie] scanner Thanks for the sugestion about the SANE website. I downloaded SANE however, after configuring it ( I guess I did not do it right) it does not work. Does any body know the steps to follow? I tried both ways: SANE 1.01 rpm and the tar version. My scanner is a Mustek 600 CP (parallel).
Re: [newbie] scanner
"J. Marrero" wrote: Thanks for the sugestion about the SANE website. I downloaded SANE however, after configuring it ( I guess I did not do it right) it does not work. Does any body know the steps to follow? I tried both ways: SANE 1.01 rpm and the tar version. My scanner is a Mustek 600 CP (parallel). SANE does not support any parallel port scanners. I have one too and its the main reason why I can't remove Windows from my system. Gilbert
Re: [newbie] scanner
"Lyndon Lininger Sr." wrote: I have one of those also, and according to the supported hardware lists. It is not on any of them. It looks like about the only scanners supported so far are scsi. L I thought so too, although somewhere I read that parallel were supported. Probably my mistake. Thanks for the input.
Re: [newbie] scanner
I checked on the SANE site for my scanner. Of course, it is not listed. I have a Mustek 1200II EP. It is on its own parallel port and not through the printer. I read all the Mustek scanners on the list. They were mostly all SCSI. I read that the 600 something was partially supported IF it is hooked up to its own parallel port. At 06:27 PM 5/21/99 -0700, you wrote: "Lyndon Lininger Sr." wrote: I have one of those also, and according to the supported hardware lists. It is not on any of them. It looks like about the only scanners supported so far are scsi. L I thought so too, although somewhere I read that parallel were supported. Probably my mistake. Thanks for the input.
Re: [newbie] scanner
I also have parallel port scanner and it is also the only reason I have to muck about with windows --- Gilbert Espinosa [EMAIL PROTECTED] wrote: "J. Marrero" wrote: Thanks for the sugestion about the SANE website. I downloaded SANE however, after configuring it ( I guess I did not do it right) it does not work. Does any body know the steps to follow? I tried both ways: SANE 1.01 rpm and the tar version. My scanner is a Mustek 600 CP (parallel). SANE does not support any parallel port scanners. I have one too and its the main reason why I can't remove Windows from my system. Gilbert _ Do You Yahoo!? Free instant messaging and more at http://messenger.yahoo.com
[newbie] scanner
If you have a scanner working successfully with 5.3, I need your help. What do I need to do, what configuration to use, etc. Thanks
[newbie] Scanner SCSI others
Hi, I've some problems and in order of importance I expose you, if there is somewhere, someone that can help my in something. :-)) I've Mandrake 5.3 with 2.2.5 kernel upgraded. --- scanner --- I have a problem with my scanner an Artec ViewScan A6000C plus SCSI with DTC 3151/3181 host. I can't manage the SCSI host in Linux may someone help me? --- cdrw --- I've a Yamaha CDRW 1644E, EIDE/ATAPI and I' would use cdrecord but I don't know how to se ide-scsi emulation. --- 1024 boot limit --- I've patitionig a friend's hard-disk in two using FIPS. Naturally to not loss windoze I put linux in the second. The HD's map is FAT32, SWAP, EXT2. I install linux and all was ok untill I tried to start: it was halt the system. I supposed that is because of 1024 boot limits. (?) This HD is a Samsung 3,2G with 824 LBA cyls. Please someone can tell me if exist a way to install correctly Linux without loss windoze (for many my friend's that is very important). --- mount --- I've write a CD-ROM in file system OSTA UDF known as "packet writing" but I cannot mount it. If I mount this CD I see only a ISO9660 partition that contains a message about OSTA UDF file system ad a win95 driver for this file system. If OSTA UDF file system is supported by linux how I can get this features ? --- man command --- [root@localhost /root]# man -c ls Formatting page, please wait... standard input:34: warning: can't find character with input code 232 standard input:51: warning: can't find character with input code 233 standard input:52: warning: can't find character with input code 224 standard input:90: warning: can't find character with input code 249 standard input:245: warning: can't find character with input code 200 standard input:297: warning: can't find character with input code 242 and I can't see accented characters. Please, someone may send me the newbie-digest V1 #105 i lost it. Thank to all that will help me _ DO YOU YAHOO!? Il tuo indirizzo gratis e per sempre @yahoo.it su http://mail.yahoo.it