Re: [newbie] Kvirc
For MDK 9.0 it's here: ftp://csociety-ftp.ecn.purdue.edu/pub/Mandrake/9.0/contrib/RPMS/ Just scroll down till you find it, download and install with rpm -ivh kvirc*.rpm For MDK 9.1 it's here: ftp://csociety-ftp.ecn.purdue.edu/pub/Mandrake/9.1/contrib/RPMS/ Just do the same as above. Then you might want to go to the plf site below and make sure your contrib source is configured properly. Jim On Wednesday 25 June 2003 06:16 pm, Dan Gordon wrote: On June 25, 2003 01:31 pm, JoeHill wrote: 1. Go here and configure all your souces: http://plf.zarb.org/~nanardon/index.php 2. then as root, urpmi kvirc Did this and output was no package named kvirc lol i dont think someone wants me in irc rofl Regards, Dan Gordon -- 6:01pm up 3 days, 22:15, 3 users, load average: 0.00, 0.05, 0.05 Running Mandrake 9.0 - Linux - because life is too short for reboots... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
Dan Gordon wrote: On June 25, 2003 12:27 am, Barry Premeaux wrote: Check this link out. http://rpmfind.net/linux/rpm2html/search.php?query=Kvircsubmit=Sea rch+... I tryed some of these and they wanted to remove a lot of kde stuff and window managers and andyikes. Some of the newer Mandrake versions are Beta, but they may be worth a try. Regards, Dan Gordon Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com The only other thing I can think of would be looking in the Mandrake Software links on http://www.pclinuxonline.com I'm sorry I haven't been of any real help. Barry Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
On June 25, 2003 03:10 pm, JoeHill wrote: On Wed, 25 Jun 2003 14:16:56 -0400 Then all of your sources are not configured. I ran urpmi kvirc and it looks like it was intalled from either main or contrib. Will try it again. [EMAIL PROTECTED]:~/cvs$rpm -q kvirc kvirc-3.0.0-0.beta1.5mdk Ah thats beta one, beta two has been out for a few months now. what version of mandrake and kde are you running? Mandrake 9.1 KDE 3.1 if all else fails, use xchat, it's a beaut, and as far as I'm concerned, anything that begins with a k is to be avoided. I use xchat and its not to bad, i remeber using kvirc 2.11 in KDE 2 and really liked it but i think they are bloating the new version of kvirc with junk but im waiting to see what the final looks like anyway. I need to learn text based clients though, but finding the time anymore is brutal. -- Wed Jun 25 21:09:35 EDT 2003 21:09:35 up 9:07, 3 users, load average: 0.15, 0.07, 0.01 Rudeness is a weak man's imitation of strength. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
On June 25, 2003 11:16 am, Dan Gordon did speak: On June 25, 2003 01:31 pm, JoeHill wrote: 1. Go here and configure all your souces: http://plf.zarb.org/~nanardon/index.php 2. then as root, urpmi kvirc Did this and output was no package named kvirc lol i dont think someone wants me in irc rofl Regards, Dan Gordon It's in the club contribs, actually. And I wouldn't bother. The beta is buggier than an ant hill. About half the basic functions don't work or don't work at all well. Hell, you can't even type /me message or /onotice messge without it being send out in plain text. And don't even try to DCC. As near as I can figure, KVirc is as near a dead issue as you can get. The 2.x versions, which worked like a hot damn, haven't been upgraded in about 2 years and the beta 3.x doesn't seem to have been updated in months. They have a pretty new web site though! ttfn John Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
On June 25, 2003 12:27 am, Barry Premeaux wrote: Check this link out. http://rpmfind.net/linux/rpm2html/search.php?query=Kvircsubmit=Sea rch+... I tryed some of these and they wanted to remove a lot of kde stuff and window managers and andyikes. Some of the newer Mandrake versions are Beta, but they may be worth a try. Regards, Dan Gordon -- Wed Jun 25 13:03:09 EDT 2003 13:03:09 up 1:00, 3 users, load average: 0.10, 0.08, 0.05 Nezvannyi gost'--khuzhe tatarina. [An uninvited guest is worse than the Mongol invasion] -- Russian proverb Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
On Wed, 25 Jun 2003 13:05:56 -0400 Dan Gordon [EMAIL PROTECTED] uttered: I tryed some of these and they wanted to remove a lot of kde stuff and window managers and andyikes. 1. Go here and configure all your souces: http://plf.zarb.org/~nanardon/index.php 2. then as root, urpmi kvirc -- + Joe Hill + Registered Linux user #282046 + Homepage: http://nodex.sytes.net + ICQ# 279518458 + Do what thou wilt, this shall be the + whole of the law. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
On Wed, 25 Jun 2003, Dan Gordon wrote: On June 25, 2003 01:31 pm, JoeHill wrote: 1. Go here and configure all your souces: http://plf.zarb.org/~nanardon/index.php 2. then as root, urpmi kvirc Did this and output was no package named kvirc lol i dont think someone wants me in irc rofl Use Irssi or Xchat. -- A. Talsta Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
On Wednesday 25 Jun 2003 7:16 pm, Dan Gordon wrote: On June 25, 2003 01:31 pm, JoeHill wrote: 1. Go here and configure all your souces: http://plf.zarb.org/~nanardon/index.php 2. then as root, urpmi kvirc Did this and output was no package named kvirc lol i dont think someone wants me in irc rofl Could it have been dropped in favour of ksirc? Anne Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kvirc
Dan Gordon wrote: Does anyone know where i might find a precompiled rpm for Kvirc ? I have tryed everything to install this but have found no Mandrake specific packages. Any help apreaciated. Regards, Dan Gordon Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Check this link out. http://rpmfind.net/linux/rpm2html/search.php?query=Kvircsubmit=Search+... Some of the newer Mandrake versions are Beta, but they may be worth a try. Barry Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Wednesday 22 Jan 2003 6:22 pm, Anne Wilson wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? Anne Open kpackage search on package kvirc and you will see a list of the files. Or..In a terminal urpmf kvirc Or.. in a root terminal updatedb slocate kvirc derek -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Wednesday 22 Jan 2003 6:22 pm, Anne Wilson wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? The menu entry has meanwhile appeared :) I'd still like to know, though, whether those files in the old partitions are the ones in use. I want to get rid of the 8.2, but am increasingly worried that rpms seem to put things in there. Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Wed, 22 Jan 2003 18:22:14 + Anne Wilson [EMAIL PROTECTED] wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? Anne -- Registered Linux User No.293302 the rpm i installed put it in /usr/bin/kvirc I don't know about where the source puts it though, i couldn't get it to install. [jerry@main jerry]$ whereis kvirc kvirc: /usr/bin/kvirc /usr/share/kvirc [jerry@main jerry]$ -- -- Registered Linux User #300600 Registered Linux Machine #185855 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] kvirc menu entry
you may want to look at /usr/local/kde/bin as that is where a few kde apps installed thereselves on my mdk9 system. Brian D. Klar - CVE Multimax Network Engineer WPAFB -Original Message- From: Jerry Barton [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 21, 2003 1:54 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] kvirc menu entry On Wed, 22 Jan 2003 18:22:14 + Anne Wilson [EMAIL PROTECTED] wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? Anne -- Registered Linux User No.293302 the rpm i installed put it in /usr/bin/kvirc I don't know about where the source puts it though, i couldn't get it to install. [jerry@main jerry]$ whereis kvirc kvirc: /usr/bin/kvirc /usr/share/kvirc [jerry@main jerry]$ -- -- Registered Linux User #300600 Registered Linux Machine #185855 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Wednesday 22 Jan 2003 6:41 pm, Anne Wilson wrote: On Wednesday 22 Jan 2003 6:22 pm, Anne Wilson wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? The menu entry has meanwhile appeared :) I'd still like to know, though, whether those files in the old partitions are the ones in use. I want to get rid of the 8.2, but am increasingly worried that rpms seem to put things in there. Anne Only if you have mounted those old partitions as /usr (Which would be crazy) Just look at your fstab file to see what is mounted where. If you do not want to use those old partitions then do not mount them. derek -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Tuesday 21 Jan 2003 6:54 pm, Jerry Barton wrote: On Wed, 22 Jan 2003 18:22:14 + Anne Wilson [EMAIL PROTECTED] wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? Anne -- Registered Linux User No.293302 the rpm i installed put it in /usr/bin/kvirc I don't know about where the source puts it though, i couldn't get it to install. [jerry@main jerry]$ whereis kvirc kvirc: /usr/bin/kvirc /usr/share/kvirc [jerry@main jerry]$ Thanks, that's put my mind at rest. There is one in 8.2/usr/bin, but there is one in /usr/bin and it has today's datestamp on it. Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Wednesday 22 Jan 2003 6:44 pm, Derek Jennings wrote: On Wednesday 22 Jan 2003 6:22 pm, Anne Wilson wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? Anne Open kpackage search on package kvirc and you will see a list of the files. Or..In a terminal urpmf kvirc Or.. in a root terminal updatedb slocate kvirc I tried slocate kvirc, but it's too easy to miss an entry amongs so many. Anyway, found it now. Thanks, all Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kvirc menu entry
On Wednesday 22 Jan 2003 6:56 pm, Derek Jennings wrote: On Wednesday 22 Jan 2003 6:41 pm, Anne Wilson wrote: On Wednesday 22 Jan 2003 6:22 pm, Anne Wilson wrote: I've just installed kvirc, but can't find the executable (I want to make a menu entry) unless the entries in my 8.2 installation are relevant. Can anyone give me a pointer? The menu entry has meanwhile appeared :) I'd still like to know, though, whether those files in the old partitions are the ones in use. I want to get rid of the 8.2, but am increasingly worried that rpms seem to put things in there. Anne Only if you have mounted those old partitions as /usr (Which would be crazy) Just look at your fstab file to see what is mounted where. If you do not want to use those old partitions then do not mount them. They are mounted as mdk8_2 and oldhome, which seemed a good idea until I made sure that there was nothing I needed to copy. I guess it would be sensible now to get rid of the mount. It certainly added to the problem when moz plugins found there way there - or perhaps it was seeing old plugins, who knows? Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] KVirc (Was: Wine problems)
On Sun, 11 Jun 2000, Colin L. Whipple wrote: Trying to "make" kvirc 2.0, after installing and making QT 2.1.1, I get the following at the end of the make: from libkvispeak.cpp:34: trees.h:33: strstream.h: No such file or directory make[4]: *** [libkvispeak.lo] Error 1 make[4]: Leaving directory At least the "strstream.h: no such file or directory" would already give some pointers. Are you sure you have all the packages installed that are needed for compiling C programs? `/Downloads/kvirc-2.0.0/kvirc-2.0.0/src/plugins/speak' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/Downloads/kvirc-2.0.0/kvirc-2.0.0/src/plugins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/Downloads/kvirc-2.0.0/kvirc-2.0.0/src' make[1]: *** [all-recursive-am] Error 2 make[1]: Leaving directory `/Downloads/kvirc-2.0.0/kvirc-2.0.0/src' make: *** [all-recursive] Error 1 Also it is advisable to compile things as root, if you want to be able to use them systemwide. Don't know if you did this, so I throw this in anyway. Paul -- Yesterday is Past; Tomorrow is the Future; Today is a Gift...That is why we call it The Present. )0([[EMAIL PROTECTED]])0( http://nlpagan.net - ICQ 147208 Registered Linux User 174403
Re: [newbie] KVirc (Was: Wine problems)
Sure Gary, Here's the URL: http://www.kvirc.net/ to read up on it. I chose the download section on the top of the page on the menu, that page it shows locations in several countries. I went to the bottom of that page and chose the section where there are older KVIrc, it took me to the KVIrc directory at the following URL where I chose the 2.0.0 directory, and below that source and downloaded it directly from KVIrc instead of one of the mirrors. ftp://ftp.kvirc.net/kvirc/ Hope that helps, Bambi Gary wrote: Hi Fran, On Sunday, June 11, 2000, 12:01:55 PM, you hammered out in part about "[newbie] KVirc (Was: Wine problems)": FP Last night I downloaded and 'made' the KVIrc 2. It was so slick! FP Glad you already came up with this solution too. Can you give me a URL for KVIrc2? Really appreciate it. Would love to try it as a Wine alternative. -- Best regards, Gary Today's thought: The attention span of a computer is only as long as its electrical cord Turnaucka's Law PGP Public Key: mailto:[EMAIL PROTECTED]?subject=SendPGPKey
Re: [newbie] KVirc (Was: Wine problems)
The news section on the kvirc site (http://www.kvirc.bz.nu/ -new url) states that KDE2 support is a compile time option so if you want that later it's better to d/l the tarball now. Bill Fran Parker wrote: Actually I am running it in the original KDE that came with Mandrake 7.0 (Air) version 1.1.2-30mdk...I only had to update QT2 to QT2.1.1 and use the tar.gz instead of the RPM. It integrates differently with KDE 2.0 but I can't say how. (But that is basically what the web site said) Hope that helps some. Bambi "Ralph F. De Witt" wrote: The 2.0.0 version of Kvirc is designed to work with KDE 2.0 only. Ralph Alex V Flinsch, on Sat, 10 Jun 2000, you wrote: On Sat, 10 Jun 2000, you wrote: Did you use the i386.rpm of it? or source? May want to try an earlier version I am using 1.0 Millenium version That works well, except misc options. Bambi PS I will go to KVirc and see if I can get it and install it. However, it wouldn't be conclusive since I am using 7.0 (Air). Sorry. Digital Wokan wrote: Actually, I just tried installing KVirc 2.0.0 from the KVirc official site and it core dumped immediately under Mandrake 7.1. Perhaps I should look at the Extension CD, but it looks like MandrakeSoft may have left KVirc in the dust. In fact, I haven't seen anything but console IRC clients on the Install CD. the 0.9.0 version from the 6.0 distro works just fine under 6.0, 6.1, 7.0, and a partial 7.1 upgraded system (kernel and very few other things only) -- Alex (Go easy on me, I'm a COBOL programmer in real life)
Re: [newbie] KVirc (Was: Wine problems)
Hi folks, I just want to say a Big thankyou to everyone who has helped me. I gave up using wine, and d/loaded kvirc 2.0.0. I ran the ./configure and it told me I needed to update my QT, which I did. I got and installed 2.2.1. took a long time to make. I looked at ftp://kvirc.firenze.linux.it/pub/kvirc/2.0.0/source/INSTALL which gave me great help. Anyway I was not sure if I could make the QT in a normal user, so I installed them using root, I also installed kvirc in root too. I will try installed kvirc later today as a normal user. It worked like a dream :) Once again, many thanx Cheers Kev
Re: [newbie] KVirc (Was: Wine problems)
On Sun, 11 Jun 2000, you wrote: Hi folks, I just want to say a Big thankyou to everyone who has helped me. I gave up using wine, and d/loaded kvirc 2.0.0. I ran the ./configure and it told me I needed to update my QT, which I did. I got and installed 2.2.1. took a long time to make. I looked at Is 2.2.1 correct? The highest one I can see is 2.1.1. Colin
Re: [newbie] KVirc (Was: Wine problems)
It is QT 2.1.1 Probably just a typo. Bambi "Colin L. Whipple" wrote: On Sun, 11 Jun 2000, you wrote: Hi folks, I just want to say a Big thankyou to everyone who has helped me. I gave up using wine, and d/loaded kvirc 2.0.0. I ran the ./configure and it told me I needed to update my QT, which I did. I got and installed 2.2.1. took a long time to make. I looked at Is 2.2.1 correct? The highest one I can see is 2.1.1. Colin
Re: [newbie] KVirc (Was: Wine problems)
Is 2.2.1 correct? The highest one I can see is 2.1.1. Sorry for the typo its 2.1.1 Kev
Re: [newbie] KVirc (Was: Wine problems)
Did you use the i386.rpm of it? or source? May want to try an earlier version I am using 1.0 Millenium version That works well, except misc options. Bambi PS I will go to KVirc and see if I can get it and install it. However, it wouldn't be conclusive since I am using 7.0 (Air). Sorry. Digital Wokan wrote: Actually, I just tried installing KVirc 2.0.0 from the KVirc official site and it core dumped immediately under Mandrake 7.1. Perhaps I should look at the Extension CD, but it looks like MandrakeSoft may have left KVirc in the dust. In fact, I haven't seen anything but console IRC clients on the Install CD. Fran Parker wrote: hi Kevin, I am not a Wine expert..infact I am still trying to get dosemu to work on my ATI All in Wonder Card in VGA mode. Two things though. user.dat is a system file for windows, everyone has them. I think it is looking for it in the wrong place, mine is located on my c drive on the windows partition: dos_c/windows/user.dat You can locate yours within kde with find by searching the root for user.dat Then you can modify the config file for wine to represent where yours is. Second, if you like mIRC, you might want to take a look at KVirc. I love mIRC, and KVirc is a very close version of irc for linux. I really like it. http://www.kvirc.org Hope these suggestions help out. Bambi kevin wrote: Hi gang. I have been using mandrake a few weeks nows, and so far I have got everything to work well, apart from wine. I d/loaded rpm version 2526 and installed it.After I changed the wine.conf, I run wine, and I get the following error. Invalid path c:\windows\Profiles\adminustrator for profile directory cant find users.dat I looked though windoz and I dont seem to have those anyway. I am huge fan of mIRC, and that is the prime reason I wish to to wine. I loaded mIRC up, and it gave me a bunch of error messages. Too many to post on the ML I was wondering if there are any wine experts out there, and can help me in private? Many thanx Kev
Re: [newbie] KVirc (Was: Wine problems)
The 2.0.0 version of Kvirc is designed to work with KDE 2.0 only. Ralph Alex V Flinsch, on Sat, 10 Jun 2000, you wrote: On Sat, 10 Jun 2000, you wrote: Did you use the i386.rpm of it? or source? May want to try an earlier version I am using 1.0 Millenium version That works well, except misc options. Bambi PS I will go to KVirc and see if I can get it and install it. However, it wouldn't be conclusive since I am using 7.0 (Air). Sorry. Digital Wokan wrote: Actually, I just tried installing KVirc 2.0.0 from the KVirc official site and it core dumped immediately under Mandrake 7.1. Perhaps I should look at the Extension CD, but it looks like MandrakeSoft may have left KVirc in the dust. In fact, I haven't seen anything but console IRC clients on the Install CD. the 0.9.0 version from the 6.0 distro works just fine under 6.0, 6.1, 7.0, and a partial 7.1 upgraded system (kernel and very few other things only) -- Alex (Go easy on me, I'm a COBOL programmer in real life)
Re: [newbie] KVirc (Was: Wine problems)
OK...the new KVIrc version 2 is awesome! Now how did I get it to run, you may ask. I had the same problems everyone else had when I tried to install the rpm. Well, I went and got the QT2.1.1 and upgraded my existing QT2. Then I got the RPM and using gnorpm I installed it. Same problem as everyone elsedoesn't work. I Checked the configure and it showed the QT2 directories in the wrong place I corrected it in hopes it would re-read it the next load and then run. No go. I uninstalled the rpm and went back to the site and got the tar.gz instead...since pathing was the problem I hoped I could temporarily set my QTDIR and create a version specific to my machines configuration. It worked! And it is awesome. I am online in KVIrc 2 as we speak! Maybe this will work for the rest of you as well. Read the instructions for the installation of the tar.gz on the web site ...that really helped alot. Although I am using Bash and I set the QTDIR slightly differently then they suggested. Have fun, Bambi Digital Wokan wrote: Actually, I just tried installing KVirc 2.0.0 from the KVirc official site and it core dumped immediately under Mandrake 7.1. Perhaps I should look at the Extension CD, but it looks like MandrakeSoft may have left KVirc in the dust. In fact, I haven't seen anything but console IRC clients on the Install CD. Fran Parker wrote: hi Kevin, I am not a Wine expert..infact I am still trying to get dosemu to work on my ATI All in Wonder Card in VGA mode. Two things though. user.dat is a system file for windows, everyone has them. I think it is looking for it in the wrong place, mine is located on my c drive on the windows partition: dos_c/windows/user.dat You can locate yours within kde with find by searching the root for user.dat Then you can modify the config file for wine to represent where yours is. Second, if you like mIRC, you might want to take a look at KVirc. I love mIRC, and KVirc is a very close version of irc for linux. I really like it. http://www.kvirc.org Hope these suggestions help out. Bambi kevin wrote: Hi gang. I have been using mandrake a few weeks nows, and so far I have got everything to work well, apart from wine. I d/loaded rpm version 2526 and installed it.After I changed the wine.conf, I run wine, and I get the following error. Invalid path c:\windows\Profiles\adminustrator for profile directory cant find users.dat I looked though windoz and I dont seem to have those anyway. I am huge fan of mIRC, and that is the prime reason I wish to to wine. I loaded mIRC up, and it gave me a bunch of error messages. Too many to post on the ML I was wondering if there are any wine experts out there, and can help me in private? Many thanx Kev
Re: [newbie] KVirc (Was: Wine problems)
Actually I am running it in the original KDE that came with Mandrake 7.0 (Air) version 1.1.2-30mdk...I only had to update QT2 to QT2.1.1 and use the tar.gz instead of the RPM. It integrates differently with KDE 2.0 but I can't say how. (But that is basically what the web site said) Hope that helps some. Bambi "Ralph F. De Witt" wrote: The 2.0.0 version of Kvirc is designed to work with KDE 2.0 only. Ralph Alex V Flinsch, on Sat, 10 Jun 2000, you wrote: On Sat, 10 Jun 2000, you wrote: Did you use the i386.rpm of it? or source? May want to try an earlier version I am using 1.0 Millenium version That works well, except misc options. Bambi PS I will go to KVirc and see if I can get it and install it. However, it wouldn't be conclusive since I am using 7.0 (Air). Sorry. Digital Wokan wrote: Actually, I just tried installing KVirc 2.0.0 from the KVirc official site and it core dumped immediately under Mandrake 7.1. Perhaps I should look at the Extension CD, but it looks like MandrakeSoft may have left KVirc in the dust. In fact, I haven't seen anything but console IRC clients on the Install CD. the 0.9.0 version from the 6.0 distro works just fine under 6.0, 6.1, 7.0, and a partial 7.1 upgraded system (kernel and very few other things only) -- Alex (Go easy on me, I'm a COBOL programmer in real life)
Re: [newbie] Kvirc frozen up...
What version of KVirc are you running...I have the new one from the KVirc site and it works great...as long as you don't choose the miscellaneous button (closes program)not done yet. :) Very nice revision. Bambi vern wrote: I have had similar results with Netscape and XCDroast they'll fire up the hard drive and go on a "seek and destroy" mission of some sort! I have made the "process control" widget in KDE a permanent resident on my tool bar at the bottom of the screen. I can look at all the running processes and kill off the one that has run amuck! There may be a platypus among your penguins! vern Corrado / Prometheus The Gifter wrote: ... well, that's the problem! Since yesterday, all ok: today, every time I've tried to use Kvirc, all seemed to be right, till the tips box appear, giving no sign of life... then the hd start running, and did'nt stop at all (Wait half an hour...); reinstallation did nothing, the only difference between yesterday and today on my system, are QT2 libs upgraded to 2.1.0... (1.44 are still there, of course, since kde need it... but I use Gnome, aniway...)... Any ideas? Corrado -- Vernon Stilwell [EMAIL PROTECTED] Hardinsburg, Kentucky[EMAIL PROTECTED] This email was created in a Micro$haft free environment! Silly hacker, root is for administrators!
Re: [newbie] Kvirc frozen up...
Thanks, Fran: I have the newest one as well, and I'm VERY aware :-) of the miscellaneous button little drawback... Perhaps I've finally found what's wrong, but I think I'll verify tomorrow... };- Sometimes, I need some sllep, too... ^__^ Aniway, does anybody know if I can set the channel I'm op on "invitation" mode throgh Kvirc or Xchat? Corrado Fran Parker wrote: What version of KVirc are you running...I have the new one from the KVirc site and it works great...as long as you don't choose the miscellaneous button (closes program)not done yet. :) Very nice revision. Bambi vern wrote: I have had similar results with Netscape and XCDroast they'll fire up the hard drive and go on a "seek and destroy" mission of some sort! I have made the "process control" widget in KDE a permanent resident on my tool bar at the bottom of the screen. I can look at all the running processes and kill off the one that has run amuck! There may be a platypus among your penguins! vern Corrado / Prometheus The Gifter wrote: ... well, that's the problem! Since yesterday, all ok: today, every time I've tried to use Kvirc, all seemed to be right, till the tips box appear, giving no sign of life... then the hd start running, and did'nt stop at all (Wait half an hour...); reinstallation did nothing, the only difference between yesterday and today on my system, are QT2 libs upgraded to 2.1.0... (1.44 are still there, of course, since kde need it... but I use Gnome, aniway...)... Any ideas? Corrado -- Vernon Stilwell [EMAIL PROTECTED] Hardinsburg, Kentucky[EMAIL PROTECTED] This email was created in a Micro$haft free environment! Silly hacker, root is for administrators!
