RE: [PHP] newbie has include path error & new problem
Mike, I do believe you are right. Here are my apache logs for today, after I attempted to connect to localhost: [Wed Jul 4 09:43:33 2001] [crit] (98)Address already in use: make_sock: could not bind to port 80 [Wed Jul 4 09:43:37 2001] [crit] (98)Address already in use: make_sock: could not bind to port 80 [Wed Jul 4 09:44:05 2001] [crit] (98)Address already in use: make_sock: could not bind to port 80 Thanks again for taking the time to help me chase down this problem. daniel -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 03, 2001 9:55 PM To: [EMAIL PROTECTED] Subject: Re: [PHP] newbie has include path error & new problem hey daniel, i think we're chasing a red herring here, and i'm not sure i remember the original problem... ;) so, you can't load http://localhost or http://127.0.0.1 correct? what do your apache error logs say? i'm beginning to think your networking is fine. mike on 7/3/01 12:17 PM, Daniel Goldin at [EMAIL PROTECTED] wrote: > Here what I get: > > Kernel IP routing table > Destination Gateway Genmask Flags Metric RefUse > Iface > 199.34.58.0 * 255.255.255.0 U 0 00 eth0 > 127.0.0.0 * 255.0.0.0 U 0 00 lo > default 199.34.58.7 0.0.0.0 UG0 00 eth0 > > > If thids doesn't work I will hit the manuals a secomnd time, although I > admit my first time browsing through the extensive documentation on ethernet > devices and network administration had made me a bit flummoxed. > > Anyway, thank you so much for your time. You and others on this list have > been fantastic dealing what has turned into an off-topic problem. > > Best to all, > > daniel -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
Here what I get: Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 199.34.58.0 * 255.255.255.0 U 0 00 eth0 127.0.0.0 * 255.0.0.0 U 0 00 lo default 199.34.58.7 0.0.0.0 UG0 00 eth0 If thids doesn't work I will hit the manuals a secomnd time, although I admit my first time browsing through the extensive documentation on ethernet devices and network administration had made me a bit flummoxed. Anyway, thank you so much for your time. You and others on this list have been fantastic dealing what has turned into an off-topic problem. Best to all, daniel -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Monday, July 02, 2001 11:22 PM To: 'PHP List' Subject: Re: [PHP] newbie has include path error & new problem cool, you should be able to get the route table with either 'route' or 'netstat -r' on a redhat box. they both return the same thing on my slackware box. [use@box user]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface localnet* 255.255.255.0 U 0 00 eth0 loopback* 255.0.0.0 U 0 00 lo default gw.mydomain 0.0.0.0 UG1 00 eth0 see how loopback points to the 'lo' interface? does yours? like scott mentioned, you should read the man pages on route and ifconfig. you can find good help at http://www.linuxdoc.org/ mike on 7/2/01 9:53 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > I'm on a redhat 7.1 box on a pentium 3 pc. I set up networking via netcfg. > Here are the settings (names have been modified): > > Names > > Hostname localhost.localdomain > > > Hosts > > IP Name Nickname > - > 127.0.0.1 localhost.localdomain localhost > 199.33.57.1 windowshost > 198.77.110.8internet.com ghc000 > > > Interface > > interface IP Proto > -- > lo 127.0.0.1None > eth0 199.33.57.3 None > > > Routing > > Default Gateway 199.33.57.7 > default gateway deviceeth0 > > > Again, I appreciate your help. > > best, > > daniel > > -----Original Message- > From: mike cullerton [mailto:[EMAIL PROTECTED]] > Sent: Monday, July 02, 2001 3:06 PM > To: 'PHP List' > Subject: Re: [PHP] newbie has include path error & new problem > > > on 7/2/01 3:59 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > >> Yes, I could load a page from localhost until I set up networking. >> >> No, I cannot load a page from 127.0.0.1. Tried that. >> >> Embarrassed to ask. What is a routing table and how do I find it? > > no need to be embarrased for not knowing what a routing table is, most > people wouldn't. a routing table is used by a networked computer to > determine how to reach remote hosts. it tells the machine what interface to > use for a particular host and physical layer address to send to. > > what kind of a machine are you on? > > what steps (specifically) did you take to 'set up networking'? > > -- mike cullerton > -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP] newbie has include path error & new problem
cool, you should be able to get the route table with either 'route' or 'netstat -r' on a redhat box. they both return the same thing on my slackware box. [use@box user]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface localnet* 255.255.255.0 U 0 00 eth0 loopback* 255.0.0.0 U 0 00 lo default gw.mydomain 0.0.0.0 UG1 00 eth0 see how loopback points to the 'lo' interface? does yours? like scott mentioned, you should read the man pages on route and ifconfig. you can find good help at http://www.linuxdoc.org/ mike on 7/2/01 9:53 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > I'm on a redhat 7.1 box on a pentium 3 pc. I set up networking via netcfg. > Here are the settings (names have been modified): > > Names > > Hostname localhost.localdomain > > > Hosts > > IP Name Nickname > - > 127.0.0.1 localhost.localdomain localhost > 199.33.57.1 windowshost > 198.77.110.8internet.com ghc000 > > > Interface > > interface IP Proto > -- > lo 127.0.0.1None > eth0 199.33.57.3 None > > > Routing > > Default Gateway 199.33.57.7 > default gateway deviceeth0 > > > Again, I appreciate your help. > > best, > > daniel > > -----Original Message----- > From: mike cullerton [mailto:[EMAIL PROTECTED]] > Sent: Monday, July 02, 2001 3:06 PM > To: 'PHP List' > Subject: Re: [PHP] newbie has include path error & new problem > > > on 7/2/01 3:59 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > >> Yes, I could load a page from localhost until I set up networking. >> >> No, I cannot load a page from 127.0.0.1. Tried that. >> >> Embarrassed to ask. What is a routing table and how do I find it? > > no need to be embarrased for not knowing what a routing table is, most > people wouldn't. a routing table is used by a networked computer to > determine how to reach remote hosts. it tells the machine what interface to > use for a particular host and physical layer address to send to. > > what kind of a machine are you on? > > what steps (specifically) did you take to 'set up networking'? > > -- mike cullerton > -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
I'm on a redhat 7.1 box on a pentium 3 pc. I set up networking via netcfg. Here are the settings (names have been modified): Names Hostname localhost.localdomain Hosts IP Name Nickname - 127.0.0.1 localhost.localdomain localhost 199.33.57.1 windowshost 198.77.110.8internet.com ghc000 Interface interface IP Proto -- lo 127.0.0.1None eth0 199.33.57.3 None Routing Default Gateway 199.33.57.7 default gateway deviceeth0 Again, I appreciate your help. best, daniel -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Monday, July 02, 2001 3:06 PM To: 'PHP List' Subject: Re: [PHP] newbie has include path error & new problem on 7/2/01 3:59 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Yes, I could load a page from localhost until I set up networking. > > No, I cannot load a page from 127.0.0.1. Tried that. > > Embarrassed to ask. What is a routing table and how do I find it? no need to be embarrased for not knowing what a routing table is, most people wouldn't. a routing table is used by a networked computer to determine how to reach remote hosts. it tells the machine what interface to use for a particular host and physical layer address to send to. what kind of a machine are you on? what steps (specifically) did you take to 'set up networking'? -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP] newbie has include path error & new problem
on 7/2/01 3:59 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Yes, I could load a page from localhost until I set up networking. > > No, I cannot load a page from 127.0.0.1. Tried that. > > Embarrassed to ask. What is a routing table and how do I find it? no need to be embarrased for not knowing what a routing table is, most people wouldn't. a routing table is used by a networked computer to determine how to reach remote hosts. it tells the machine what interface to use for a particular host and physical layer address to send to. what kind of a machine are you on? what steps (specifically) did you take to 'set up networking'? -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
you will probably need to use two programs to properly configure your linux box for networking you have to configure a default gateway to tell the linux networking stuff how to get out to the internet. read the man pages on 'route' and 'ifconfig', the binaries should be here: /sbin/route /sbin/ifconfig > -Original Message- > From: Daniel Goldin [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel > Goldin (E-mail) > Sent: Monday, July 02, 2001 6:00 PM > To: 'mike cullerton' > Cc: 'PHP List' > Subject: RE: [PHP] newbie has include path error & new problem > > > Yes, I could load a page from localhost until I set up networking. > > No, I cannot load a page from 127.0.0.1. Tried that. > > Embarrassed to ask. What is a routing table and how do I find it? > > Best, > > Daniel > > -Original Message- > From: mike cullerton [mailto:[EMAIL PROTECTED]] > Sent: Monday, July 02, 2001 2:37 PM > To: [EMAIL PROTECTED] > Cc: 'PHP List' > Subject: Re: [PHP] newbie has include path error & new problem > > > so, let me see if i understand the situation. you could load a webpage from > localhost. then you set up networking to access the internet thru a windows > machine acting as a gateway. now you can't load a page from localhost? > correct? > > is localhost still your machine? can you load a page from http://127.0.0.1 > > again, what does your routing table look like? > > on 7/2/01 3:29 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > > > Appreciate your help. Yes I can ping localhost. I do believe I can solve > the > > php problem once I solve the networking problem as I've discovered that > the > > prepend path was set incorrectly. > > > >> > >> for your network problem, it seems that you didn't really achieve > >> 'networking linux box to windows host' correctly. can you currently ping > >> localhost? what does your route table look like? > > > -- mike cullerton > > > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > To contact the list administrators, e-mail: [EMAIL PROTECTED] > -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
Yes, I could load a page from localhost until I set up networking. No, I cannot load a page from 127.0.0.1. Tried that. Embarrassed to ask. What is a routing table and how do I find it? Best, Daniel -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Monday, July 02, 2001 2:37 PM To: [EMAIL PROTECTED] Cc: 'PHP List' Subject: Re: [PHP] newbie has include path error & new problem so, let me see if i understand the situation. you could load a webpage from localhost. then you set up networking to access the internet thru a windows machine acting as a gateway. now you can't load a page from localhost? correct? is localhost still your machine? can you load a page from http://127.0.0.1 again, what does your routing table look like? on 7/2/01 3:29 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Appreciate your help. Yes I can ping localhost. I do believe I can solve the > php problem once I solve the networking problem as I've discovered that the > prepend path was set incorrectly. > >> >> for your network problem, it seems that you didn't really achieve >> 'networking linux box to windows host' correctly. can you currently ping >> localhost? what does your route table look like? -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP] newbie has include path error & new problem
so, let me see if i understand the situation. you could load a webpage from localhost. then you set up networking to access the internet thru a windows machine acting as a gateway. now you can't load a page from localhost? correct? is localhost still your machine? can you load a page from http://127.0.0.1 again, what does your routing table look like? on 7/2/01 3:29 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Appreciate your help. Yes I can ping localhost. I do believe I can solve the > php problem once I solve the networking problem as I've discovered that the > prepend path was set incorrectly. > >> >> for your network problem, it seems that you didn't really achieve >> 'networking linux box to windows host' correctly. can you currently ping >> localhost? what does your route table look like? -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
Hmm. I tried "http://123.123.123.123/ (using windows machine) and I got a request for authorization. When I filled in my Linux username and pass, it returned an "authorization failed" message. Any advice. Best, daniel -Original Message- From: Peter Houchin - SunRentals Australia [mailto:[EMAIL PROTECTED]] Sent: Sunday, July 01, 2001 11:37 PM To: php-general Subject: RE: [PHP] newbie has include path error & new problem if the windows machine is the "host machine" ie for your internet http://localhost/ will only be for the windows machine so if you are tring to get to that address from your linux machine you won't be able to ... however if your machines ip was say 123.123.123.123(windows machine) then from your linux machine go http://123.123.123.123/ and you should be able to see the pages -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Monday, July 02, 2001 3:29 PM To: php-general Subject: Re: [PHP] newbie has include path error & new problem i'm guessing your problems are unrelated. for your network problem, it seems that you didn't really achieve 'networking linux box to windows host' correctly. can you currently ping localhost? what does your route table look like? as for the php problem. it's definitely a problem with your path. in your error message >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. php thinks your include_path is ''. that means you have no include path, not even '.' mine is something like .:/var/www/php:/var/www/docs/include:/usr/local/lib/php this is defined in php.ini what's really interesting, is that you call prepend.php with an absolute path. you shouldn't even need the include path. i'd look in php.ini. where do you actually store prepend.php? mike on 7/1/01 11:00 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Thanks for your help. The server document root is: /etc/httpd/htdocs. > Perhaps I need to point to this document in root in php.ini file? > > Anyway, I cannot try that now as I have finally achieved networking linux > box to windows host that acts as our internet server. Now when I try to > connect to: http://localhost I get this error > > "425 HTTP ERROR > > Unable to connect to remote host" > > I tried stopping the network, but that only caused Netscape to choke. Hmm. > (help?) > > Best, > > Daniel > > -----Original Message- > From: Justin French [mailto:[EMAIL PROTECTED]] > Sent: Saturday, June 30, 2001 12:36 AM > To: [EMAIL PROTECTED] > Cc: php > Subject: Re: [PHP] newbie has include path error > > > Hi, > > If you can "surf" local host for standard HTML pages and other php pages > (without includes in them) eg: > > http://localhost/file.html > > Then the problem isn't the server really, it seems to me that the server > document root for your files should be something like: > > /usr/local/apache/ not /etc/httpd/php/prepend.php > > Can you ftp into your server? What's the path to your document root for > all your html / php files? I doubt it's /etc/httpd/php/file.html, if it > isn't this, then the problem is somewhere in your php cnfig to indicate > where the document root is. > > Eh, it's kidna hard to explain... maybe someone else can explain it > better :) > > > Justin French > Creative Director > Indent.com.au > > > > Daniel Goldin wrote: > >> I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. >> Compiled them all from source and was very proud, as I am at best an > amateur >> programmer. In other words, I love this stuff, but it doen't come > naturally. >> >> Recently I've been fiddling with networking (to little avail), installed a >> new ethernet card and did some other stuff... Anyway, now when I go into >> http://localhost (apache is running), I get this error: >> >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. >> >> I've tried putting in this include path in my php.ini file to no effect. >> Please help. I have several projects I'm working on that require php and I >> have no way of working on them on my development box. >> >> Any help gratefully appreciated. Also, I apologize for being too chatty. > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > To contact the list administrators, e-mail: [EMAIL PROTECTED] > -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
Appreciate your help. Yes I can ping localhost. I do believe I can solve the php problem once I solve the networking problem as I've discovered that the prepend path was set incorrectly. Best, Daniel -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Sunday, July 01, 2001 10:29 PM To: php-general Subject: Re: [PHP] newbie has include path error & new problem i'm guessing your problems are unrelated. for your network problem, it seems that you didn't really achieve 'networking linux box to windows host' correctly. can you currently ping localhost? what does your route table look like? as for the php problem. it's definitely a problem with your path. in your error message >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. php thinks your include_path is ''. that means you have no include path, not even '.' mine is something like .:/var/www/php:/var/www/docs/include:/usr/local/lib/php this is defined in php.ini what's really interesting, is that you call prepend.php with an absolute path. you shouldn't even need the include path. i'd look in php.ini. where do you actually store prepend.php? mike on 7/1/01 11:00 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Thanks for your help. The server document root is: /etc/httpd/htdocs. > Perhaps I need to point to this document in root in php.ini file? > > Anyway, I cannot try that now as I have finally achieved networking linux > box to windows host that acts as our internet server. Now when I try to > connect to: http://localhost I get this error > > "425 HTTP ERROR > > Unable to connect to remote host" > > I tried stopping the network, but that only caused Netscape to choke. Hmm. > (help?) > > Best, > > Daniel > > -Original Message- > From: Justin French [mailto:[EMAIL PROTECTED]] > Sent: Saturday, June 30, 2001 12:36 AM > To: [EMAIL PROTECTED] > Cc: php > Subject: Re: [PHP] newbie has include path error > > > Hi, > > If you can "surf" local host for standard HTML pages and other php pages > (without includes in them) eg: > > http://localhost/file.html > > Then the problem isn't the server really, it seems to me that the server > document root for your files should be something like: > > /usr/local/apache/ not /etc/httpd/php/prepend.php > > Can you ftp into your server? What's the path to your document root for > all your html / php files? I doubt it's /etc/httpd/php/file.html, if it > isn't this, then the problem is somewhere in your php cnfig to indicate > where the document root is. > > Eh, it's kidna hard to explain... maybe someone else can explain it > better :) > > > Justin French > Creative Director > Indent.com.au > > > > Daniel Goldin wrote: > >> I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. >> Compiled them all from source and was very proud, as I am at best an > amateur >> programmer. In other words, I love this stuff, but it doen't come > naturally. >> >> Recently I've been fiddling with networking (to little avail), installed a >> new ethernet card and did some other stuff... Anyway, now when I go into >> http://localhost (apache is running), I get this error: >> >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. >> >> I've tried putting in this include path in my php.ini file to no effect. >> Please help. I have several projects I'm working on that require php and I >> have no way of working on them on my development box. >> >> Any help gratefully appreciated. Also, I apologize for being too chatty. > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > To contact the list administrators, e-mail: [EMAIL PROTECTED] > -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
if the windows machine is the "host machine" ie for your internet http://localhost/ will only be for the windows machine so if you are tring to get to that address from your linux machine you won't be able to ... however if your machines ip was say 123.123.123.123(windows machine) then from your linux machine go http://123.123.123.123/ and you should be able to see the pages -Original Message- From: mike cullerton [mailto:[EMAIL PROTECTED]] Sent: Monday, July 02, 2001 3:29 PM To: php-general Subject: Re: [PHP] newbie has include path error & new problem i'm guessing your problems are unrelated. for your network problem, it seems that you didn't really achieve 'networking linux box to windows host' correctly. can you currently ping localhost? what does your route table look like? as for the php problem. it's definitely a problem with your path. in your error message >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. php thinks your include_path is ''. that means you have no include path, not even '.' mine is something like .:/var/www/php:/var/www/docs/include:/usr/local/lib/php this is defined in php.ini what's really interesting, is that you call prepend.php with an absolute path. you shouldn't even need the include path. i'd look in php.ini. where do you actually store prepend.php? mike on 7/1/01 11:00 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Thanks for your help. The server document root is: /etc/httpd/htdocs. > Perhaps I need to point to this document in root in php.ini file? > > Anyway, I cannot try that now as I have finally achieved networking linux > box to windows host that acts as our internet server. Now when I try to > connect to: http://localhost I get this error > > "425 HTTP ERROR > > Unable to connect to remote host" > > I tried stopping the network, but that only caused Netscape to choke. Hmm. > (help?) > > Best, > > Daniel > > -----Original Message----- > From: Justin French [mailto:[EMAIL PROTECTED]] > Sent: Saturday, June 30, 2001 12:36 AM > To: [EMAIL PROTECTED] > Cc: php > Subject: Re: [PHP] newbie has include path error > > > Hi, > > If you can "surf" local host for standard HTML pages and other php pages > (without includes in them) eg: > > http://localhost/file.html > > Then the problem isn't the server really, it seems to me that the server > document root for your files should be something like: > > /usr/local/apache/ not /etc/httpd/php/prepend.php > > Can you ftp into your server? What's the path to your document root for > all your html / php files? I doubt it's /etc/httpd/php/file.html, if it > isn't this, then the problem is somewhere in your php cnfig to indicate > where the document root is. > > Eh, it's kidna hard to explain... maybe someone else can explain it > better :) > > > Justin French > Creative Director > Indent.com.au > > > > Daniel Goldin wrote: > >> I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. >> Compiled them all from source and was very proud, as I am at best an > amateur >> programmer. In other words, I love this stuff, but it doen't come > naturally. >> >> Recently I've been fiddling with networking (to little avail), installed a >> new ethernet card and did some other stuff... Anyway, now when I go into >> http://localhost (apache is running), I get this error: >> >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. >> >> I've tried putting in this include path in my php.ini file to no effect. >> Please help. I have several projects I'm working on that require php and I >> have no way of working on them on my development box. >> >> Any help gratefully appreciated. Also, I apologize for being too chatty. > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > To contact the list administrators, e-mail: [EMAIL PROTECTED] > -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP] newbie has include path error & new problem
i'm guessing your problems are unrelated. for your network problem, it seems that you didn't really achieve 'networking linux box to windows host' correctly. can you currently ping localhost? what does your route table look like? as for the php problem. it's definitely a problem with your path. in your error message >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. php thinks your include_path is ''. that means you have no include path, not even '.' mine is something like .:/var/www/php:/var/www/docs/include:/usr/local/lib/php this is defined in php.ini what's really interesting, is that you call prepend.php with an absolute path. you shouldn't even need the include path. i'd look in php.ini. where do you actually store prepend.php? mike on 7/1/01 11:00 PM, Daniel Goldin (E-mail) at [EMAIL PROTECTED] wrote: > Thanks for your help. The server document root is: /etc/httpd/htdocs. > Perhaps I need to point to this document in root in php.ini file? > > Anyway, I cannot try that now as I have finally achieved networking linux > box to windows host that acts as our internet server. Now when I try to > connect to: http://localhost I get this error > > "425 HTTP ERROR > > Unable to connect to remote host" > > I tried stopping the network, but that only caused Netscape to choke. Hmm. > (help?) > > Best, > > Daniel > > -Original Message----- > From: Justin French [mailto:[EMAIL PROTECTED]] > Sent: Saturday, June 30, 2001 12:36 AM > To: [EMAIL PROTECTED] > Cc: php > Subject: Re: [PHP] newbie has include path error > > > Hi, > > If you can "surf" local host for standard HTML pages and other php pages > (without includes in them) eg: > > http://localhost/file.html > > Then the problem isn't the server really, it seems to me that the server > document root for your files should be something like: > > /usr/local/apache/ not /etc/httpd/php/prepend.php > > Can you ftp into your server? What's the path to your document root for > all your html / php files? I doubt it's /etc/httpd/php/file.html, if it > isn't this, then the problem is somewhere in your php cnfig to indicate > where the document root is. > > Eh, it's kidna hard to explain... maybe someone else can explain it > better :) > > > Justin French > Creative Director > Indent.com.au > > > > Daniel Goldin wrote: > >> I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. >> Compiled them all from source and was very proud, as I am at best an > amateur >> programmer. In other words, I love this stuff, but it doen't come > naturally. >> >> Recently I've been fiddling with networking (to little avail), installed a >> new ethernet card and did some other stuff... Anyway, now when I go into >> http://localhost (apache is running), I get this error: >> >> Warning: Failed opening '/etc/httpd/php/prepend.php' for >> inclusion (include_path=") in unknown in line 0. >> >> I've tried putting in this include path in my php.ini file to no effect. >> Please help. I have several projects I'm working on that require php and I >> have no way of working on them on my development box. >> >> Any help gratefully appreciated. Also, I apologize for being too chatty. > > -- > PHP General Mailing List (http://www.php.net/) > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > To contact the list administrators, e-mail: [EMAIL PROTECTED] > -- mike cullerton -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
RE: [PHP] newbie has include path error & new problem
Thanks for your help. The server document root is: /etc/httpd/htdocs. Perhaps I need to point to this document in root in php.ini file? Anyway, I cannot try that now as I have finally achieved networking linux box to windows host that acts as our internet server. Now when I try to connect to: http://localhost I get this error "425 HTTP ERROR Unable to connect to remote host" I tried stopping the network, but that only caused Netscape to choke. Hmm. (help?) Best, Daniel -Original Message- From: Justin French [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 30, 2001 12:36 AM To: [EMAIL PROTECTED] Cc: php Subject: Re: [PHP] newbie has include path error Hi, If you can "surf" local host for standard HTML pages and other php pages (without includes in them) eg: http://localhost/file.html Then the problem isn't the server really, it seems to me that the server document root for your files should be something like: /usr/local/apache/ not /etc/httpd/php/prepend.php Can you ftp into your server? What's the path to your document root for all your html / php files? I doubt it's /etc/httpd/php/file.html, if it isn't this, then the problem is somewhere in your php cnfig to indicate where the document root is. Eh, it's kidna hard to explain... maybe someone else can explain it better :) Justin French Creative Director Indent.com.au Daniel Goldin wrote: > I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. > Compiled them all from source and was very proud, as I am at best an amateur > programmer. In other words, I love this stuff, but it doen't come naturally. > > Recently I've been fiddling with networking (to little avail), installed a > new ethernet card and did some other stuff... Anyway, now when I go into > http://localhost (apache is running), I get this error: > > Warning: Failed opening '/etc/httpd/php/prepend.php' for > inclusion (include_path=") in unknown in line 0. > > I've tried putting in this include path in my php.ini file to no effect. > Please help. I have several projects I'm working on that require php and I > have no way of working on them on my development box. > > Any help gratefully appreciated. Also, I apologize for being too chatty. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP] newbie has include path error
Hi, If you can "surf" local host for standard HTML pages and other php pages (without includes in them) eg: http://localhost/file.html Then the problem isn't the server really, it seems to me that the server document root for your files should be something like: /usr/local/apache/ not /etc/httpd/php/prepend.php Can you ftp into your server? What's the path to your document root for all your html / php files? I doubt it's /etc/httpd/php/file.html, if it isn't this, then the problem is somewhere in your php cnfig to indicate where the document root is. Eh, it's kidna hard to explain... maybe someone else can explain it better :) Justin French Creative Director Indent.com.au Daniel Goldin wrote: > I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. > Compiled them all from source and was very proud, as I am at best an amateur > programmer. In other words, I love this stuff, but it doen't come naturally. > > Recently I've been fiddling with networking (to little avail), installed a > new ethernet card and did some other stuff... Anyway, now when I go into > http://localhost (apache is running), I get this error: > > Warning: Failed opening '/etc/httpd/php/prepend.php' for > inclusion (include_path=") in unknown in line 0. > > I've tried putting in this include path in my php.ini file to no effect. > Please help. I have several projects I'm working on that require php and I > have no way of working on them on my development box. > > Any help gratefully appreciated. Also, I apologize for being too chatty. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP] newbie has include path error
In article <001a01c100cd$3146be20$033a22c7@daniel>, [EMAIL PROTECTED] ("Daniel Goldin") wrote: > Warning: Failed opening '/etc/httpd/php/prepend.php' for > inclusion (include_path=") in unknown in line 0. > > I've tried putting in this include path in my php.ini file to no effect. It looks as though your include_path setting may be messed up. Call phpinfo() to see what PHP is using for include_path. Make sure you're quoting the value correctly in php.ini--that one quote above makes me think that it's wonky right now. -- CC -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
[PHP] newbie has include path error
I had php/apache/mysql working perfectly for awhile on my redaht 7.1 box. Compiled them all from source and was very proud, as I am at best an amateur programmer. In other words, I love this stuff, but it doen't come naturally. Recently I've been fiddling with networking (to little avail), installed a new ethernet card and did some other stuff... Anyway, now when I go into http://localhost (apache is running), I get this error: Warning: Failed opening '/etc/httpd/php/prepend.php' for inclusion (include_path=") in unknown in line 0. I've tried putting in this include path in my php.ini file to no effect. Please help. I have several projects I'm working on that require php and I have no way of working on them on my development box. Any help gratefully appreciated. Also, I apologize for being too chatty. daniel Daniel Goldin [EMAIL PROTECTED] Creative Director 323.225.1926 BlueLamp Productions www.blue-lamp.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]