Re: Any good mastering plugin out there?
Hi, Hmm, i'm not so good at compression and multi-band compression i'm afraid. I'm not really certain what does what there. I know what the attack and release parameters do but the other ones are a bit confusing to me. I feel like a hopeless case, very silly. /Krister 2 feb 2014 kl. 01:09 skrev Poppa Bear : > Do you have a good handle on compression and multiband compression? These are > must know building blocks for mixing and mastering. Understanding frequency > responses and how they open up not only individual tracks and instruments, > but intire mixes when on a stareo bus are just as important to understand > too. You see, when your mixing a project you are baking a cake with the right > amounts of ingreadients, at the right temperture and Mastering is the > frosting and the decarations on top. Each part has a seprat process, but they > eventually need to complament each other as a whole. So in this case, if a > person tries to get the mastering down, without the mixing concepts it is > like trying to throw a beautiful topping/icing on acake that taist like crap. > - Original Message - From: "Krister Ekstrom" > > To: > Sent: Saturday, February 01, 2014 9:27 AM > Subject: Re: Any good mastering plugin out there? > > > Thanks, i think that's good advise actually. I probably will have to learn > what plugs do what and what i can use. > /Krister > > 1 feb 2014 kl. 01:10 skrev TheOreoMonster : > >> At this stage in the game i honestly don't think you should be looking at >> any plug ins outside of what pro tools comes with. All the pro tools plug >> ins has presets for most instrument types with a few final mix/master >> presets as well. Presets are a great starting point, but learn why they work >> and how they do what they do. and how to fine tune to your song. The stock >> plug ins are great and there are even popular songs that were done entirely >> with pro tools stock plug ins. Once you have a handle on those and have a >> better idea of what you want, then you can start spending money on plug ins >> with more confidence. First step get the best sounds you can before >> recording. Choosing the right virtual synth/drum synth sounds, or moving the >> one microphone you have around till you get the instrument or voice you are >> trying to record sound the best it can before hitting record. Also the firs >> t Plug in to hone in on and learn about is Eq. It will be probably your >> most used tool for both mixing and mastering. you can also grab the >> quizztones iOS app to do some EQ ear training. Next important beast to >> tackle is compression. Come to grips with EQ and compression along with >> getting the best sources of recordings you can and you can get 80% to 90% >> of the way there before you add anything else to your mix or master. >> On Jan 31, 2014, at 4:34 PM, Poppa Bear wrote: >> >>> Also, remember this, if you don't have good mixing skills, these Mastering >>> plugins will often only magnify any lack of mixing skills, or even worse, >>> mask the problems leading a person to think they did a good job. At that >>> point the Mastering plugs can become a crutch that cause people to think >>> they have a good sounding project until it is matched up against good mixes >>> and mastering skills. I find people who have the same plugins as me, and >>> bring their stuff over to the studio to play it and once I play a few >>> projects they can't believe that we have the same tools. They just haven't >>> paid their dues, in the excitement to find the magic bullet to fix their >>> mixing problems they have looked for band aids to cover up their ear sores >>> instead of really learning the anatomy of a good mix. I am finding that my >>> understanding of mixing is growing much more as I get back to the basics of >>> engineering/mixing. I realize how silly I was when I got my first bundle of >>> mastering plugins. Getting into the basics of compression, multiband >>> compression, Limiting, EQ frequencies, how those frequencies affect >>> instruments, vocals, mic proximity affect, room acoustics and so on and on >>> will be so impacting that a person won't even need to ask about mastering >>> plugins because once they read about that plug they will be able to tell if >>> it is exactly what they need or not. >>> >>> - Original Message - From: "Chris Smart" >>> >>> To: >>> >>> Sent: Friday, January 31, 2014 6:16 AM >>> >>> Subject: Re: Any good mastering plugin out there? >>> >>> >>> As someone who does mastering, I am dead set against using presets in that manner. There is far too much of that homogeneity now. It reminds me of the equalizer presets on my mp3 player. One is called rock, another is called classical, another is called jazz. Wow, you mean if I pick one, it will make everything sound poppy or rocky or jazzy? That's so cool! (sarcasm) That said, just about any li
Re: Any good mastering plugin out there?
Hi Krister, Call or contact, Groove 3 Inc. CALL US: 1-800-460-7509 Groove 3 Inc ord...@groove3.com They have training tutorials on all these topics. Theres one called "compression explained" that will put it all together for you. Tell them Chuck sent you! :) They always give 50% off for the visual thing. They may be $10.00 for that one. YMMV Chuck CHUCK REICHEL soundpicturerecord...@gmail.com www.SoundPictureRecording.com 954-742-0019 Isaiah 26 : 3 Thou wilt keep him in perfect peace, whose mind is stayed on thee: because he trusteth in thee. In GOD I Trust On Feb 2, 2014, at 5:39 AM, Krister Ekstrom wrote: > Hi, > Hmm, i'm not so good at compression and multi-band compression i'm afraid. > I'm not really certain what does what there. I know what the attack and > release parameters do but the other ones are a bit confusing to me. I feel > like a hopeless case, very silly. > /Krister > > 2 feb 2014 kl. 01:09 skrev Poppa Bear : > >> Do you have a good handle on compression and multiband compression? These >> are must know building blocks for mixing and mastering. Understanding >> frequency responses and how they open up not only individual tracks and >> instruments, but intire mixes when on a stareo bus are just as important to >> understand too. You see, when your mixing a project you are baking a cake >> with the right amounts of ingreadients, at the right temperture and >> Mastering is the frosting and the decarations on top. Each part has a seprat >> process, but they eventually need to complament each other as a whole. So in >> this case, if a person tries to get the mastering down, without the mixing >> concepts it is like trying to throw a beautiful topping/icing on acake that >> taist like crap. >> - Original Message - From: "Krister Ekstrom" >> >> To: >> Sent: Saturday, February 01, 2014 9:27 AM >> Subject: Re: Any good mastering plugin out there? >> >> >> Thanks, i think that's good advise actually. I probably will have to learn >> what plugs do what and what i can use. >> /Krister >> >> 1 feb 2014 kl. 01:10 skrev TheOreoMonster : >> >>> At this stage in the game i honestly don't think you should be looking at >>> any plug ins outside of what pro tools comes with. All the pro tools plug >>> ins has presets for most instrument types with a few final mix/master >>> presets as well. Presets are a great starting point, but learn why they >>> work and how they do what they do. and how to fine tune to your song. The >>> stock plug ins are great and there are even popular songs that were done >>> entirely with pro tools stock plug ins. Once you have a handle on those >>> and have a better idea of what you want, then you can start spending money >>> on plug ins with more confidence. First step get the best sounds you can >>> before recording. Choosing the right virtual synth/drum synth sounds, or >>> moving the one microphone you have around till you get the instrument or >>> voice you are trying to record sound the best it can before hitting record. >>> Also the firs t Plug in to hone in on and learn about is Eq. It will be >>> probably your most used tool for both mixing and mastering. you can also >>> grab the quizztones iOS app to do some EQ ear training. Next important >>> beast to tackle is compression. Come to grips with EQ and compression along >>> with getting the best sources of recordings you can and you can get 80% to >>> 90% of the way there before you add anything else to your mix or master. >>> On Jan 31, 2014, at 4:34 PM, Poppa Bear wrote: >>> Also, remember this, if you don't have good mixing skills, these Mastering plugins will often only magnify any lack of mixing skills, or even worse, mask the problems leading a person to think they did a good job. At that point the Mastering plugs can become a crutch that cause people to think they have a good sounding project until it is matched up against good mixes and mastering skills. I find people who have the same plugins as me, and bring their stuff over to the studio to play it and once I play a few projects they can't believe that we have the same tools. They just haven't paid their dues, in the excitement to find the magic bullet to fix their mixing problems they have looked for band aids to cover up their ear sores instead of really learning the anatomy of a good mix. I am finding that my understanding of mixing is growing much more as I get back to the basics of engineering/mixing. I realize how silly I was when I got my first bundle of mastering plugins. Getting into the basics of compression, multiband compression, Limiting, EQ frequencies, how those frequencies affect instruments, vocals, mic proximity affect, room acoustics and so on and on will be so impacting that a person won't even need to ask about mastering plugins because once they read about that plug they
Re: Unknown when I launch PT 11.1.2
Chaps, just a quick post to let everyone who chimed in know that this seemed to be some sort of window related to iLok authorisation. Last night I discovered that, not only had I not been successful in transferring my license across as I thought, I'd also somehow managed to bugger up the bundle license on my friends iLok, hence why it behaved the same. I never got to find out exactly what the window contained, as when I could get a set of eyes to run through the license manager I wasn't in front of my own computer, but it hasn't come up again since loading PT with a correctly activated license, so seems safe to assume that's what it was. Hurrah for flying blind eh! Scott On 2/1/14, TheOreoMonster wrote: > One reason you may want to open older sessions in 10 by default is if its > using all or mostly RTAS Plug ins. You can have them set to open in 10 since > it will load with the plug ins working. > > On Jan 31, 2014, at 4:17 PM, Nick Gawronski wrote: > >> Hi, I meant for earlier sessions then 10 you will have to change the pro >> tools version from 11 to 10 if you wish to open them up in 10 by default >> but I just have everything open up in pro tools 11. If you don't have 11 >> as the default for somethings then why have it at all if all you are going >> to use is pro tools 10? Nick Gawronski >> On 1/31/2014 11:07 AM, Slau Halatyn wrote: >>> BTW, PT version 10 and 11 use the same file extension. >>> >>> On Jan 30, 2014, at 10:18 PM, Nick Gawronski >>> wrote: >>> Hi, I think what you should try is just let pro tools 11 sit there when it launches and things should fix themselves. It does place some files in your documents folder so I would just launch it and leave it alone for about 2 minutes. If you have both 10 and 11 versions installed if you hit command and i on the session file there is an option for changing what version of pro tools is used to open each session. As they use two different file extentions you will have to make two changes unless you want 11 opening the newer sessions as well as the older sessions. I have 11 opening all sessions and have had no issues. Nick Gawronski On 1/30/2014 4:30 PM, Slau Halatyn wrote: > Hi Scott, > > I'm not sure what that window is. Frankly, it could be almost anything. > Have you tried simply pressing return? I'm thinking it might just be an > alert of some sort that has an OK button. Thing is, it could be related > to the iLok, although that doesn't seem to make sense if you're able to > open older 10.x sessions. Hmm... > > Slau > > On Jan 30, 2014, at 1:48 PM, Poppa Bear > wrote: > >> Also, when you get to that unknown screen when launching 11 can you >> get down to the file bar and go to open recent sessions and try to >> open an older project into that PT 11 window? >> - Original Message - From: "Scott Chesworth" >> >> To: >> Sent: Thursday, January 30, 2014 9:39 AM >> Subject: Re: Unknown when I launch PT 11.1.2 >> >> >>> It doesn't happen with 10, nope. >>> >>> On 1/30/14, Poppa Bear wrote: Does this happen when you try and open an older session of PT? - Original Message - From: "Scott Chesworth" To: "ptaccess" Sent: Thursday, January 30, 2014 9:13 AM Subject: Unknown when I launch PT 11.1.2 > Folks, I'm a bit stuck, hoping someone can advise... > > When I open Pro Tools 11.1.2 on Mavericks 10.9, I'm greeted by a > screen that doesn't seem to be accessible. Just one "unknown", > which > can't be interacted with. So far as I can tell, it's not an iLok > issue, as I A) think I managed to transfer my license over and B) > currently have a buddy's iLok here which is set up correctly. > > What am I missing? > > Scott > > -- > You received this message because you are subscribed to the Google > Groups > > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, > send an > > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, >>> send
Where can I address the following issue?
>Hi all, I'd like to address the following issue: While the mouse pointer in Pro Tools 10 can be controlled to a clip in the clip list with VO + Command + F5, in Pro tools 11 the case is not. I think, that's, why the operations in the clip list don't work in Pro tools 11. Do you have any idea, where to address this issue at Avid or Apple? Thanks for help Stefan -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
PT vs Amadeus at editing
Hi all. I was just wondering if anybody has experience of using Amadeus pro alongside pro tools? If so, I'm curious as to what advantages and disadvantages there are to each purely from an editing point of view. Is there tasks that are possible on one that maybe are not on the other? Thanks in advance for any input as this could help me big time with my sound production college course. I am currently using pro tools nine with mavericks but I will be upgrading to eleven in the next week or two. Cheers! Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Any good mastering plugin out there?
Take it one step at a time. Learn Eq, Then compression. Once you feel comfortable and mastered those, worry about multi band compression after that. Take baby steps,and put in the time t constantly work and learn and confidence in your mixes will come in time. On Feb 2, 2014, at 5:39 AM, Krister Ekstrom wrote: > Hi, > Hmm, i'm not so good at compression and multi-band compression i'm afraid. > I'm not really certain what does what there. I know what the attack and > release parameters do but the other ones are a bit confusing to me. I feel > like a hopeless case, very silly. > /Krister > > 2 feb 2014 kl. 01:09 skrev Poppa Bear : > >> Do you have a good handle on compression and multiband compression? These >> are must know building blocks for mixing and mastering. Understanding >> frequency responses and how they open up not only individual tracks and >> instruments, but intire mixes when on a stareo bus are just as important to >> understand too. You see, when your mixing a project you are baking a cake >> with the right amounts of ingreadients, at the right temperture and >> Mastering is the frosting and the decarations on top. Each part has a seprat >> process, but they eventually need to complament each other as a whole. So in >> this case, if a person tries to get the mastering down, without the mixing >> concepts it is like trying to throw a beautiful topping/icing on acake that >> taist like crap. >> - Original Message - From: "Krister Ekstrom" >> >> To: >> Sent: Saturday, February 01, 2014 9:27 AM >> Subject: Re: Any good mastering plugin out there? >> >> >> Thanks, i think that's good advise actually. I probably will have to learn >> what plugs do what and what i can use. >> /Krister >> >> 1 feb 2014 kl. 01:10 skrev TheOreoMonster : >> >>> At this stage in the game i honestly don't think you should be looking at >>> any plug ins outside of what pro tools comes with. All the pro tools plug >>> ins has presets for most instrument types with a few final mix/master >>> presets as well. Presets are a great starting point, but learn why they >>> work and how they do what they do. and how to fine tune to your song. The >>> stock plug ins are great and there are even popular songs that were done >>> entirely with pro tools stock plug ins. Once you have a handle on those >>> and have a better idea of what you want, then you can start spending money >>> on plug ins with more confidence. First step get the best sounds you can >>> before recording. Choosing the right virtual synth/drum synth sounds, or >>> moving the one microphone you have around till you get the instrument or >>> voice you are trying to record sound the best it can before hitting record. >>> Also the firs t Plug in to hone in on and learn about is Eq. It will be >>> probably your most used tool for both mixing and mastering. you can also >>> grab the quizztones iOS app to do some EQ ear training. Next important >>> beast to tackle is compression. Come to grips with EQ and compression along >>> with getting the best sources of recordings you can and you can get 80% to >>> 90% of the way there before you add anything else to your mix or master. >>> On Jan 31, 2014, at 4:34 PM, Poppa Bear wrote: >>> Also, remember this, if you don't have good mixing skills, these Mastering plugins will often only magnify any lack of mixing skills, or even worse, mask the problems leading a person to think they did a good job. At that point the Mastering plugs can become a crutch that cause people to think they have a good sounding project until it is matched up against good mixes and mastering skills. I find people who have the same plugins as me, and bring their stuff over to the studio to play it and once I play a few projects they can't believe that we have the same tools. They just haven't paid their dues, in the excitement to find the magic bullet to fix their mixing problems they have looked for band aids to cover up their ear sores instead of really learning the anatomy of a good mix. I am finding that my understanding of mixing is growing much more as I get back to the basics of engineering/mixing. I realize how silly I was when I got my first bundle of mastering plugins. Getting into the basics of compression, multiband compression, Limiting, EQ frequencies, how those frequencies affect instruments, vocals, mic proximity affect, room acoustics and so on and on will be so impacting that a person won't even need to ask about mastering plugins because once they read about that plug they will be able to tell if it is exactly what they need or not. - Original Message - From: "Chris Smart" To: Sent: Friday, January 31, 2014 6:16 AM Subject: Re: Any good mastering plugin out there? > As someone who does masterin
Re: Any good mastering plugin out there?
good to know about the groove3 discount. I just used up a one month free trial and while i didn't get in as many tutorials as i would of liked, I will say the videos were easy enough to follow for being videos. Joe gilder's understanding compression series is pretty good as well and comes with both video files and or mp3's so you can just listen along instead of watching the videos. On Feb 2, 2014, at 6:59 AM, CHUCK REICHEL wrote: > Hi Krister, > > Call or contact, > Groove 3 Inc. CALL US: 1-800-460-7509 Groove 3 Inc > ord...@groove3.com > > They have training tutorials on all these topics. > Theres one called "compression explained" that will put it all together for > you. > Tell them Chuck sent you! :) > They always give 50% off for the visual thing. > They may be $10.00 for that one. > YMMV > Chuck > > > > CHUCK REICHEL > soundpicturerecord...@gmail.com > www.SoundPictureRecording.com > 954-742-0019 > Isaiah 26 : 3 > Thou wilt keep him in perfect peace, whose mind is stayed on thee: because > he trusteth in thee. > > In GOD I Trust > > On Feb 2, 2014, at 5:39 AM, Krister Ekstrom wrote: > >> Hi, >> Hmm, i'm not so good at compression and multi-band compression i'm afraid. >> I'm not really certain what does what there. I know what the attack and >> release parameters do but the other ones are a bit confusing to me. I feel >> like a hopeless case, very silly. >> /Krister >> >> 2 feb 2014 kl. 01:09 skrev Poppa Bear : >> >>> Do you have a good handle on compression and multiband compression? These >>> are must know building blocks for mixing and mastering. Understanding >>> frequency responses and how they open up not only individual tracks and >>> instruments, but intire mixes when on a stareo bus are just as important to >>> understand too. You see, when your mixing a project you are baking a cake >>> with the right amounts of ingreadients, at the right temperture and >>> Mastering is the frosting and the decarations on top. Each part has a >>> seprat process, but they eventually need to complament each other as a >>> whole. So in this case, if a person tries to get the mastering down, >>> without the mixing concepts it is like trying to throw a beautiful >>> topping/icing on acake that taist like crap. >>> - Original Message - From: "Krister Ekstrom" >>> >>> To: >>> Sent: Saturday, February 01, 2014 9:27 AM >>> Subject: Re: Any good mastering plugin out there? >>> >>> >>> Thanks, i think that's good advise actually. I probably will have to learn >>> what plugs do what and what i can use. >>> /Krister >>> >>> 1 feb 2014 kl. 01:10 skrev TheOreoMonster : >>> At this stage in the game i honestly don't think you should be looking at any plug ins outside of what pro tools comes with. All the pro tools plug ins has presets for most instrument types with a few final mix/master presets as well. Presets are a great starting point, but learn why they work and how they do what they do. and how to fine tune to your song. The stock plug ins are great and there are even popular songs that were done entirely with pro tools stock plug ins. Once you have a handle on those and have a better idea of what you want, then you can start spending money on plug ins with more confidence. First step get the best sounds you can before recording. Choosing the right virtual synth/drum synth sounds, or moving the one microphone you have around till you get the instrument or voice you are trying to record sound the best it can before hitting record. Also the firs t Plug in to hone in on and learn about is Eq. It will be probably your most used tool for both mixing and mastering. you can also grab the quizztones iOS app to do some EQ ear training. Next important beast to tackle is compression. Come to grips with EQ and compression along with getting the best sources of recordings you can and you can get 80% to 90% of the way there before you add anything else to your mix or master. On Jan 31, 2014, at 4:34 PM, Poppa Bear wrote: > Also, remember this, if you don't have good mixing skills, these > Mastering plugins will often only magnify any lack of mixing skills, or > even worse, mask the problems leading a person to think they did a good > job. At that point the Mastering plugs can become a crutch that cause > people to think they have a good sounding project until it is matched up > against good mixes and mastering skills. I find people who have the same > plugins as me, and bring their stuff over to the studio to play it and > once I play a few projects they can't believe that we have the same > tools. They just haven't paid their dues, in the excitement to find the > magic bullet to fix their mixing problems they have looked for band aids > to cover up their ear sores instead of really learning the ana
Re: PT vs Amadeus at editing
as far as editing goes, You can accomplish the same task in both. The workflows may be slightly different as they are two different programs with different interfaces, but same citing task can be done in both at the end of the day. If you already familiar with Pro tools, stick with it, no reason to switch programs just for editing in my opinion. On Feb 2, 2014, at 10:49 AM, Alan Macdonald wrote: > Hi all. > > I was just wondering if anybody has experience of using Amadeus pro alongside > pro tools? If so, I'm curious as to what advantages and disadvantages there > are to each purely from an editing point of view. Is there tasks that are > possible on one that maybe are not on the other? Thanks in advance for any > input as this could help me big time with my sound production college course. > I am currently using pro tools nine with mavericks but I will be upgrading to > eleven in the next week or two. Cheers! > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Where can I address the following issue?
Hi Stefan, What operations can't you perform? You can interact with the table, select a clip, move out of the table, go to the Regions pop-up button (which is not labelled as a button but simply "Regions label) , click and select whatever option you'd like to perform. While you're at it, the shortcuts for some of the options are handy to memorize. Best, Slau On Feb 2, 2014, at 8:57 AM, Stefan Albertshauser wrote: >> Hi all, > > I'd like to address the following issue: While the mouse pointer in Pro Tools > 10 can be controlled to a clip in the clip list with VO + Command + F5, in > Pro tools 11 the case is not. I think, that's, why the operations in the clip > list don't work in Pro tools 11. Do you have any idea, where to address this > issue at Avid or Apple? > > Thanks for help > > Stefan > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Unknown when I launch PT 11.1.2
Glad to here your back in business. - Original Message - From: "Scott Chesworth" To: Sent: Sunday, February 02, 2014 3:04 AM Subject: Re: Unknown when I launch PT 11.1.2 Chaps, just a quick post to let everyone who chimed in know that this seemed to be some sort of window related to iLok authorisation. Last night I discovered that, not only had I not been successful in transferring my license across as I thought, I'd also somehow managed to bugger up the bundle license on my friends iLok, hence why it behaved the same. I never got to find out exactly what the window contained, as when I could get a set of eyes to run through the license manager I wasn't in front of my own computer, but it hasn't come up again since loading PT with a correctly activated license, so seems safe to assume that's what it was. Hurrah for flying blind eh! Scott On 2/1/14, TheOreoMonster wrote: One reason you may want to open older sessions in 10 by default is if its using all or mostly RTAS Plug ins. You can have them set to open in 10 since it will load with the plug ins working. On Jan 31, 2014, at 4:17 PM, Nick Gawronski wrote: Hi, I meant for earlier sessions then 10 you will have to change the pro tools version from 11 to 10 if you wish to open them up in 10 by default but I just have everything open up in pro tools 11. If you don't have 11 as the default for somethings then why have it at all if all you are going to use is pro tools 10? Nick Gawronski On 1/31/2014 11:07 AM, Slau Halatyn wrote: BTW, PT version 10 and 11 use the same file extension. On Jan 30, 2014, at 10:18 PM, Nick Gawronski wrote: Hi, I think what you should try is just let pro tools 11 sit there when it launches and things should fix themselves. It does place some files in your documents folder so I would just launch it and leave it alone for about 2 minutes. If you have both 10 and 11 versions installed if you hit command and i on the session file there is an option for changing what version of pro tools is used to open each session. As they use two different file extentions you will have to make two changes unless you want 11 opening the newer sessions as well as the older sessions. I have 11 opening all sessions and have had no issues. Nick Gawronski On 1/30/2014 4:30 PM, Slau Halatyn wrote: Hi Scott, I'm not sure what that window is. Frankly, it could be almost anything. Have you tried simply pressing return? I'm thinking it might just be an alert of some sort that has an OK button. Thing is, it could be related to the iLok, although that doesn't seem to make sense if you're able to open older 10.x sessions. Hmm... Slau On Jan 30, 2014, at 1:48 PM, Poppa Bear wrote: Also, when you get to that unknown screen when launching 11 can you get down to the file bar and go to open recent sessions and try to open an older project into that PT 11 window? - Original Message - From: "Scott Chesworth" To: Sent: Thursday, January 30, 2014 9:39 AM Subject: Re: Unknown when I launch PT 11.1.2 It doesn't happen with 10, nope. On 1/30/14, Poppa Bear wrote: Does this happen when you try and open an older session of PT? - Original Message - From: "Scott Chesworth" To: "ptaccess" Sent: Thursday, January 30, 2014 9:13 AM Subject: Unknown when I launch PT 11.1.2 Folks, I'm a bit stuck, hoping someone can advise... When I open Pro Tools 11.1.2 on Mavericks 10.9, I'm greeted by a screen that doesn't seem to be accessible. Just one "unknown", which can't be interacted with. So far as I can tell, it's not an iLok issue, as I A) think I managed to transfer my license over and B) currently have a buddy's iLok here which is set up correctly. What am I missing? Scott -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are
Re: Reordering tracks
Has this changed at all and ProTools 10? I cannot reorder tracks in either edit or mixed window following the below instructions Sent from my iPhone > On Jan 7, 2011, at 7:18 AM, Scott Chesworth wrote: > > Hey Chuck, > > Yowza, this is great news, workflow halved. Presumably being able to > do this in the tracklist table is new in 8.1 and up, because it > definitely didn't work in 8.0.4 when I originally tried it. Still, > great to know. > > Cheers > Scott > >> On 1/6/11, Chuck Reichel wrote: >> Hi Scott & List, >> >> I just got this to work in PT 8.1 for reordering tracks in the mix >> window.. >> step #1 Just inter act with the track list table. >> step #2 find the track you want to reorder and "mouse down on it. >> step 3 using VO move up or down in the track list table till you find >> where you want to put it. >> Step 4 "mouse up" on the track and bang! its there just below track >> you stopped on. >> >> At this point the track you just dropped on to its new position is now >> selected, and it has moved below the track your stopped on! >> >> Just another note you do not half to inter act with a track and then >> stop interacting with it to select the track. >> You can just "Vo space bar" on it.. to select it. >> Just use the mac commands for selecting contiguous "Shift click with >> actual mouse" or non contiguous "Command click with mouse" items in >> this case tracks in the track list in the mix window in PT. >> This is going to speed up the work flow immensely!!! >> Even with the Control-24 I find my self looking at the track list >> table to absolutely verify that the tracks are selected before I make >> a group per say.. >> This keeps the work flow in the track list table! >> Your Mileage may vary. >> Chuck >> >> >>> On Sep 22, 2010, at 5:16 AM, Scott Chesworth wrote: >>> >>> Folks, >>> >>> In addition to all the valuable tips Slau and Chuck replied with, I >>> thought I should update this thread to say that there's also a >>> dragging workflow to reorder tracks. >>> >>> The following assumes that you're dragging in the mix window: >>> 1. Interact with the track you want to drag, and use >>> VO+Command+Shift+Space to mouse-down on the track name field. Note >>> that at this point, you really do have to be interacted, and it'll >>> only work on the track name field. >>> 2. Uninteract, and navigate left or right along the horizontal display >>> of tracks until you reach the track to the right of where you want the >>> moving track to be dropped. When you mouse-up in the next step, the >>> track you're moving will always be dropped to the left of the track VO >>> is focused on. >>> 3. Mouse up using VO+Command+Shift+Space again to drop your moving >>> track. Note that in the mix window, you don't have to be interacted at >>> dropping stage. >>> >>> Should you want to perform this workflow in the edit window, the only >>> significant differences are: >>> 1. The track name field is landed upon as soon as you interact with >>> the tracks >>> 2. You also have to interact and be focused on the track name field to >>> drop here for some odd reason. >>> >>> Easier than it sounds believe me. Not always the most efficient >>> method, but between this and what Slau and Chuck posted, we're pretty >>> well equipped to rearrange tracks now. >>> >>> Hth >>> Scott >>> On 9/20/10, Chuck Reichel wrote: Hi Scott, If you want it beside your original track You can Duplicate the track. Shift optionn D will make dupp of selected track. This should drop the track by the original track. Make sure "insert after last selected track is checked" in the duplicate dialogue. Also in the duplication dialogue you could un checkactive playlist. I just took a look at the duplicate dialogue and pt 8.04 is very cool you can choose what gets duplicated with accessible check boxes! Very cool compared to PT 5.1.. Let us know what happens? The atvantage is that it will save time with all the track I/O and effects especialy if it is related to the org GT track. Your mileage may very! Talk soon Chuck Reichel 954-742-0019 www.SoundPictureRecording.com In GOD I Trust > On Sep 20, 2010, at 11:23 AM, Scott Chesworth wrote: > > Folks, > > Has anybody figured out a way of reordering tracks after creation? > As > an example, let's say I have a last minute flash of inspiration > for a > lead guitar harmony, but I'm creating the track for this stroke of > genius to reside on after tracking a load of keys. By default, > when I > create a new track, it goes straight to the bottom of the list, so > I'd > have my lead stuff, then the keys tracks, and one more lonely lead > harmony after those. Is there a way of dragging that harmony track > up > to be with its guitar pals using VO? > > Cheers in advance >
Re: PT vs Amadeus at editing
Hi: SAmadeus is sort of like gold wave on the PC. It is good for crweagting ring tones and stuff like that, but I wouldn 't use it for serious work. GOrd On Feb 2, 2014, at 10:59 AM, TheOreoMonster wrote: > as far as editing goes, You can accomplish the same task in both. The > workflows may be slightly different as they are two different programs with > different interfaces, but same citing task can be done in both at the end of > the day. If you already familiar with Pro tools, stick with it, no reason to > switch programs just for editing in my opinion. > > On Feb 2, 2014, at 10:49 AM, Alan Macdonald > wrote: > >> Hi all. >> >> I was just wondering if anybody has experience of using Amadeus pro >> alongside pro tools? If so, I'm curious as to what advantages and >> disadvantages there are to each purely from an editing point of view. Is >> there tasks that are possible on one that maybe are not on the other? Thanks >> in advance for any input as this could help me big time with my sound >> production college course. I am currently using pro tools nine with >> mavericks but I will be upgrading to eleven in the next week or two. Cheers! >> >> Sent from my iPhone >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Where can I address the following issue?
Hi Stefan, Jason Dasent at Jason Dasent Has conquered the clips issue. May be he can chime in and share how to execute the clips work flow??? Talk soon Chuck YMMV CHUCK REICHEL soundpicturerecord...@gmail.com www.SoundPictureRecording.com 954-742-0019 GUFFAWING :) In GOD I Trust On Feb 2, 2014, at 8:57 AM, Stefan Albertshauser wrote: >> Hi all, > > I'd like to address the following issue: While the mouse pointer in Pro Tools > 10 can be controlled to a clip in the clip list with VO + Command + F5, in > Pro tools 11 the case is not. I think, that's, why the operations in the clip > list don't work in Pro tools 11. Do you have any idea, where to address this > issue at Avid or Apple? > > Thanks for help > > Stefan > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
question about playing back a pro tools session I got from school recorded in pro tools 8 HD
Hi, I was given a pro tools session by one of my instructors to mess around with but they recorded it on pro tools 8 HD and have now upgraded to 10. When I try to open up the session all of the outputs are set to different outputs on my digi 003 and no matter what I do no audio plays. I can see the wav files and select each one and play them back normally but would like to be able to get all of the tracks like they should be played back. I did go into each track and set them to outputs 1 and 2 but not totally sure if something else is going on that prevents the session from getting played back and I am not getting any errors from pro tools 11 on my system that says this playback engine can't play the files as they are at 44100 sample rate. What can I try to get these files working properly on my system? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Reordering tracks
Hi Herman, Forget about those instructions. You can reorder tracks in two ways: First, in the tracks table, navigate to the track name (and not the show/hide button). Perform a mouse-down with Control-Option-command-shift-Space bar. Move to the track after which you'd like the dragged track to appear and press the same key combination for mouse up. Second, if the tracks table isn't showing, you can perform the same action within the Mix window (quite possibly the Edit window as well, although I haven't checked). Do a mouse down on the track name within the track's channel strip, stop interacting with the track, move to where you wish to drop the track and mouse up. Let us know if it works for you. Best, Slau On Feb 2, 2014, at 3:19 PM, hermanfer...@gmail.com wrote: > Has this changed at all and ProTools 10? I cannot reorder tracks in either > edit or mixed window following the below instructions > > Sent from my iPhone > >> On Jan 7, 2011, at 7:18 AM, Scott Chesworth wrote: >> >> Hey Chuck, >> >> Yowza, this is great news, workflow halved. Presumably being able to >> do this in the tracklist table is new in 8.1 and up, because it >> definitely didn't work in 8.0.4 when I originally tried it. Still, >> great to know. >> >> Cheers >> Scott >> >>> On 1/6/11, Chuck Reichel wrote: >>> Hi Scott & List, >>> >>> I just got this to work in PT 8.1 for reordering tracks in the mix >>> window.. >>> step #1 Just inter act with the track list table. >>> step #2 find the track you want to reorder and "mouse down on it. >>> step 3 using VO move up or down in the track list table till you find >>> where you want to put it. >>> Step 4 "mouse up" on the track and bang! its there just below track >>> you stopped on. >>> >>> At this point the track you just dropped on to its new position is now >>> selected, and it has moved below the track your stopped on! >>> >>> Just another note you do not half to inter act with a track and then >>> stop interacting with it to select the track. >>> You can just "Vo space bar" on it.. to select it. >>> Just use the mac commands for selecting contiguous "Shift click with >>> actual mouse" or non contiguous "Command click with mouse" items in >>> this case tracks in the track list in the mix window in PT. >>> This is going to speed up the work flow immensely!!! >>> Even with the Control-24 I find my self looking at the track list >>> table to absolutely verify that the tracks are selected before I make >>> a group per say.. >>> This keeps the work flow in the track list table! >>> Your Mileage may vary. >>> Chuck >>> >>> On Sep 22, 2010, at 5:16 AM, Scott Chesworth wrote: Folks, In addition to all the valuable tips Slau and Chuck replied with, I thought I should update this thread to say that there's also a dragging workflow to reorder tracks. The following assumes that you're dragging in the mix window: 1. Interact with the track you want to drag, and use VO+Command+Shift+Space to mouse-down on the track name field. Note that at this point, you really do have to be interacted, and it'll only work on the track name field. 2. Uninteract, and navigate left or right along the horizontal display of tracks until you reach the track to the right of where you want the moving track to be dropped. When you mouse-up in the next step, the track you're moving will always be dropped to the left of the track VO is focused on. 3. Mouse up using VO+Command+Shift+Space again to drop your moving track. Note that in the mix window, you don't have to be interacted at dropping stage. Should you want to perform this workflow in the edit window, the only significant differences are: 1. The track name field is landed upon as soon as you interact with the tracks 2. You also have to interact and be focused on the track name field to drop here for some odd reason. Easier than it sounds believe me. Not always the most efficient method, but between this and what Slau and Chuck posted, we're pretty well equipped to rearrange tracks now. Hth Scott > On 9/20/10, Chuck Reichel wrote: > Hi Scott, > If you want it beside your original track You can Duplicate the > track. > Shift optionn D will make dupp of selected track. > This should drop the track by the original track. > Make sure "insert after last selected track is checked" in the > duplicate dialogue. > Also in the duplication dialogue you could un checkactive playlist. > I just took a look at the duplicate dialogue and pt 8.04 is very cool > you can choose what gets duplicated with accessible check boxes! Very > cool compared to PT 5.1.. > Let us know what happens? > The atvantage is that it will save time with all the track I/O and > effects especialy if it is related to the org GT track
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
I'd suggest the following: Go into your I/O Setup, press Command-2 for output tab, Command-a to select all outputs and press the Delete Path button. Say OK to the warning and then click the Default button which will create default output paths for your interface. bTW, before doing the above, you might want to make sure your playback engine is set to 003 in your Playback preferences. After hitting OK on the I/O dialog, go to one of your tracks and interact with it. Move down to the output assignment. Bring mouse cursor focus to it. With a physical mouse button or trackpad button, use the Option modifier with a click to set all track outputs to the same selection and choose your main stereo outputs. Slau On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: > Hi, I was given a pro tools session by one of my instructors to mess around > with but they recorded it on pro tools 8 HD and have now upgraded to 10. > When I try to open up the session all of the outputs are set to different > outputs on my digi 003 and no matter what I do no audio plays. I can see the > wav files and select each one and play them back normally but would like to > be able to get all of the tracks like they should be played back. I did go > into each track and set them to outputs 1 and 2 but not totally sure if > something else is going on that prevents the session from getting played back > and I am not getting any errors from pro tools 11 on my system that says this > playback engine can't play the files as they are at 44100 sample rate. What > can I try to get these files working properly on my system? Nick Gawronski > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
Slau, could it be a resolution issue? I can't remember if the 003 only supports up to 96KHZ play back. - Original Message - From: "Slau Halatyn" To: Sent: Sunday, February 02, 2014 1:58 PM Subject: Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD I'd suggest the following: Go into your I/O Setup, press Command-2 for output tab, Command-a to select all outputs and press the Delete Path button. Say OK to the warning and then click the Default button which will create default output paths for your interface. bTW, before doing the above, you might want to make sure your playback engine is set to 003 in your Playback preferences. After hitting OK on the I/O dialog, go to one of your tracks and interact with it. Move down to the output assignment. Bring mouse cursor focus to it. With a physical mouse button or trackpad button, use the Option modifier with a click to set all track outputs to the same selection and choose your main stereo outputs. Slau On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: Hi, I was given a pro tools session by one of my instructors to mess around with but they recorded it on pro tools 8 HD and have now upgraded to 10. When I try to open up the session all of the outputs are set to different outputs on my digi 003 and no matter what I do no audio plays. I can see the wav files and select each one and play them back normally but would like to be able to get all of the tracks like they should be played back. I did go into each track and set them to outputs 1 and 2 but not totally sure if something else is going on that prevents the session from getting played back and I am not getting any errors from pro tools 11 on my system that says this playback engine can't play the files as they are at 44100 sample rate. What can I try to get these files working properly on my system? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
Well, kind of unlikely that a teacher would be giving out 96K sessions when standard resolution would probably do fine for purposes of instruction. That's just my gut feeling. Also, if the files were playing back individually, as Nick mentioned, they probably weren't 96K. Naturally, I could be wrong. Just figured my suggestion would help eliminate variables. Let's see. Slau On Feb 2, 2014, at 6:07 PM, Poppa Bear wrote: > Slau, could it be a resolution issue? I can't remember if the 003 only > supports up to 96KHZ play back. > - Original Message - From: "Slau Halatyn" > To: > Sent: Sunday, February 02, 2014 1:58 PM > Subject: Re: question about playing back a pro tools session I got from > school recorded in pro tools 8 HD > > > I'd suggest the following: > > Go into your I/O Setup, press Command-2 for output tab, Command-a to select > all outputs and press the Delete Path button. Say OK to the warning and then > click the Default button which will create default output paths for your > interface. bTW, before doing the above, you might want to make sure your > playback engine is set to 003 in your Playback preferences. > > After hitting OK on the I/O dialog, go to one of your tracks and interact > with it. Move down to the output assignment. Bring mouse cursor focus to it. > With a physical mouse button or trackpad button, use the Option modifier with > a click to set all track outputs to the same selection and choose your main > stereo outputs. > > Slau > > On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: > >> Hi, I was given a pro tools session by one of my instructors to mess around >> with but they recorded it on pro tools 8 HD and have now upgraded to 10. >> When I try to open up the session all of the outputs are set to different >> outputs on my digi 003 and no matter what I do no audio plays. I can see the >> wav files and select each one and play them back normally but would like to >> be able to get all of the tracks like they should be played back. I did go >> into each track and set them to outputs 1 and 2 but not totally sure if >> something else is going on that prevents the session from getting played >> back and I am not getting any errors from pro tools 11 on my system that >> says this playback engine can't play the files as they are at 44100 sample >> rate. What can I try to get these files working properly on my system? >> Nick Gawronski >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
Hi, I manually went to each track and made sure they were all set to outputs one and two and still nothing even when I use the transport controls mainly the return to zero one and then hit play. These files are only CD quality 24 bit as I checked using command and I before I opened them. My teacher even told me this as they told me that recording at the highest possible bit rate and sample rate is not always the best thing to do as it takes up lots of space and not all users have the equipment to play that back. I did make sure mute was not on or solo was not on as voiceover did not tell me this information in 10.9.1 or is this a bug? I am using pro tools 11. Does pro tools 11 alert you when an update is released like version 10 did? I keep getting crash reporter messages and I of course fill them in after I save and quit pro tools but as far as I know I have never had any local issues when creating sessions here at home but I wonder if something is getting corrupted? Nick Gawronski On 2/2/2014 6:02 PM, Slau Halatyn wrote: Well, kind of unlikely that a teacher would be giving out 96K sessions when standard resolution would probably do fine for purposes of instruction. That's just my gut feeling. Also, if the files were playing back individually, as Nick mentioned, they probably weren't 96K. Naturally, I could be wrong. Just figured my suggestion would help eliminate variables. Let's see. Slau On Feb 2, 2014, at 6:07 PM, Poppa Bear wrote: Slau, could it be a resolution issue? I can't remember if the 003 only supports up to 96KHZ play back. - Original Message - From: "Slau Halatyn" To: Sent: Sunday, February 02, 2014 1:58 PM Subject: Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD I'd suggest the following: Go into your I/O Setup, press Command-2 for output tab, Command-a to select all outputs and press the Delete Path button. Say OK to the warning and then click the Default button which will create default output paths for your interface. bTW, before doing the above, you might want to make sure your playback engine is set to 003 in your Playback preferences. After hitting OK on the I/O dialog, go to one of your tracks and interact with it. Move down to the output assignment. Bring mouse cursor focus to it. With a physical mouse button or trackpad button, use the Option modifier with a click to set all track outputs to the same selection and choose your main stereo outputs. Slau On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: Hi, I was given a pro tools session by one of my instructors to mess around with but they recorded it on pro tools 8 HD and have now upgraded to 10. When I try to open up the session all of the outputs are set to different outputs on my digi 003 and no matter what I do no audio plays. I can see the wav files and select each one and play them back normally but would like to be able to get all of the tracks like they should be played back. I did go into each track and set them to outputs 1 and 2 but not totally sure if something else is going on that prevents the session from getting played back and I am not getting any errors from pro tools 11 on my system that says this playback engine can't play the files as they are at 44100 sample rate. What can I try to get these files working properly on my system? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
Did you delete your output paths in the I/O Setup dialog and create new default paths? Slau On Feb 2, 2014, at 8:56 PM, Nick Gawronski wrote: > Hi, I manually went to each track and made sure they were all set to outputs > one and two and still nothing even when I use the transport controls mainly > the return to zero one and then hit play. These files are only CD quality 24 > bit as I checked using command and I before I opened them. My teacher even > told me this as they told me that recording at the highest possible bit rate > and sample rate is not always the best thing to do as it takes up lots of > space and not all users have the equipment to play that back. I did make > sure mute was not on or solo was not on as voiceover did not tell me this > information in 10.9.1 or is this a bug? I am using pro tools 11. Does pro > tools 11 alert you when an update is released like version 10 did? I keep > getting crash reporter messages and I of course fill them in after I save and > quit pro tools but as far as I know I have never had any local issues when > creating sessions here at home but I wonder if something is getting > corrupted? Nick Gawronski > On 2/2/2014 6:02 PM, Slau Halatyn wrote: >> Well, kind of unlikely that a teacher would be giving out 96K sessions when >> standard resolution would probably do fine for purposes of instruction. >> That's just my gut feeling. Also, if the files were playing back >> individually, as Nick mentioned, they probably weren't 96K. Naturally, I >> could be wrong. Just figured my suggestion would help eliminate variables. >> Let's see. >> >> Slau >> >> On Feb 2, 2014, at 6:07 PM, Poppa Bear wrote: >> >>> Slau, could it be a resolution issue? I can't remember if the 003 only >>> supports up to 96KHZ play back. >>> - Original Message - From: "Slau Halatyn" >>> To: >>> Sent: Sunday, February 02, 2014 1:58 PM >>> Subject: Re: question about playing back a pro tools session I got from >>> school recorded in pro tools 8 HD >>> >>> >>> I'd suggest the following: >>> >>> Go into your I/O Setup, press Command-2 for output tab, Command-a to select >>> all outputs and press the Delete Path button. Say OK to the warning and >>> then click the Default button which will create default output paths for >>> your interface. bTW, before doing the above, you might want to make sure >>> your playback engine is set to 003 in your Playback preferences. >>> >>> After hitting OK on the I/O dialog, go to one of your tracks and interact >>> with it. Move down to the output assignment. Bring mouse cursor focus to >>> it. With a physical mouse button or trackpad button, use the Option >>> modifier with a click to set all track outputs to the same selection and >>> choose your main stereo outputs. >>> >>> Slau >>> >>> On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: >>> Hi, I was given a pro tools session by one of my instructors to mess around with but they recorded it on pro tools 8 HD and have now upgraded to 10. When I try to open up the session all of the outputs are set to different outputs on my digi 003 and no matter what I do no audio plays. I can see the wav files and select each one and play them back normally but would like to be able to get all of the tracks like they should be played back. I did go into each track and set them to outputs 1 and 2 but not totally sure if something else is going on that prevents the session from getting played back and I am not getting any errors from pro tools 11 on my system that says this playback engine can't play the files as they are at 44100 sample rate. What can I try to get these files working properly on my system? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptacc
Re: Any good mastering plugin out there?
So Joe Gilders videos are good as well, I have a good handle on compression but I would like to learn more. So they are worth getting? On 2/2/14, TheOreoMonster wrote: > good to know about the groove3 discount. I just used up a one month free > trial and while i didn't get in as many tutorials as i would of liked, I > will say the videos were easy enough to follow for being videos. Joe > gilder's understanding compression series is pretty good as well and comes > with both video files and or mp3's so you can just listen along instead of > watching the videos. > > On Feb 2, 2014, at 6:59 AM, CHUCK REICHEL > wrote: > >> Hi Krister, >> >> Call or contact, >> Groove 3 Inc. CALL US: 1-800-460-7509 Groove 3 Inc >> ord...@groove3.com >> >> They have training tutorials on all these topics. >> Theres one called "compression explained" that will put it all together >> for you. >> Tell them Chuck sent you! :) >> They always give 50% off for the visual thing. >> They may be $10.00 for that one. >> YMMV >> Chuck >> >> >> >> CHUCK REICHEL >> soundpicturerecord...@gmail.com >> www.SoundPictureRecording.com >> 954-742-0019 >> Isaiah 26 : 3 >> Thou wilt keep him in perfect peace, whose mind is stayed on thee: >> because he trusteth in thee. >> >> In GOD I Trust >> >> On Feb 2, 2014, at 5:39 AM, Krister Ekstrom wrote: >> >>> Hi, >>> Hmm, i'm not so good at compression and multi-band compression i'm >>> afraid. I'm not really certain what does what there. I know what the >>> attack and release parameters do but the other ones are a bit confusing >>> to me. I feel like a hopeless case, very silly. >>> /Krister >>> >>> 2 feb 2014 kl. 01:09 skrev Poppa Bear : >>> Do you have a good handle on compression and multiband compression? These are must know building blocks for mixing and mastering. Understanding frequency responses and how they open up not only individual tracks and instruments, but intire mixes when on a stareo bus are just as important to understand too. You see, when your mixing a project you are baking a cake with the right amounts of ingreadients, at the right temperture and Mastering is the frosting and the decarations on top. Each part has a seprat process, but they eventually need to complament each other as a whole. So in this case, if a person tries to get the mastering down, without the mixing concepts it is like trying to throw a beautiful topping/icing on acake that taist like crap. - Original Message - From: "Krister Ekstrom" To: Sent: Saturday, February 01, 2014 9:27 AM Subject: Re: Any good mastering plugin out there? Thanks, i think that's good advise actually. I probably will have to learn what plugs do what and what i can use. /Krister 1 feb 2014 kl. 01:10 skrev TheOreoMonster : > At this stage in the game i honestly don't think you should be looking > at any plug ins outside of what pro tools comes with. All the pro tools > plug ins has presets for most instrument types with a few final > mix/master presets as well. Presets are a great starting point, but > learn why they work and how they do what they do. and how to fine tune > to your song. The stock plug ins are great and there are even popular > songs that were done entirely with pro tools stock plug ins. Once you > have a handle on those and have a better idea of what you want, then > you can start spending money on plug ins with more confidence. First > step get the best sounds you can before recording. Choosing the right > virtual synth/drum synth sounds, or moving the one microphone you have > around till you get the instrument or voice you are trying to record > sound the best it can before hitting record. Also the firs t Plug in > to hone in on and learn about is Eq. It will be probably your most used > tool for both mixing and mastering. you can also grab the quizztones > iOS app to do some EQ ear training. Next important beast to tackle is > compression. Come to grips with EQ and compression along with getting > the best sources of recordings you can and you can get 80% to 90% of > the way there before you add anything else to your mix or master. > On Jan 31, 2014, at 4:34 PM, Poppa Bear > wrote: > >> Also, remember this, if you don't have good mixing skills, these >> Mastering plugins will often only magnify any lack of mixing skills, >> or even worse, mask the problems leading a person to think they did a >> good job. At that point the Mastering plugs can become a crutch that >> cause people to think they have a good sounding project until it is >> matched up against good mixes and mastering skills. I find people who >> have the same plugins as me, and bring their stuff over to the studio >> to play it and once I play a few projects they can't believe that we >> have the sam
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
Hi, Yes I did that I should have said this in my last message. Should I try using pro tools 10 to see if it works or is there a method for finding out what audio files are for what track by looking at the session file as there are numbered files for each track like bass01.wav and bass02.wav? Can a pro tools 8 or 11 session be reversed so you can tell what files it uses for each track outside of pro tools? Nick Gawronski On 2/2/2014 8:15 PM, Slau Halatyn wrote: Did you delete your output paths in the I/O Setup dialog and create new default paths? Slau On Feb 2, 2014, at 8:56 PM, Nick Gawronski wrote: Hi, I manually went to each track and made sure they were all set to outputs one and two and still nothing even when I use the transport controls mainly the return to zero one and then hit play. These files are only CD quality 24 bit as I checked using command and I before I opened them. My teacher even told me this as they told me that recording at the highest possible bit rate and sample rate is not always the best thing to do as it takes up lots of space and not all users have the equipment to play that back. I did make sure mute was not on or solo was not on as voiceover did not tell me this information in 10.9.1 or is this a bug? I am using pro tools 11. Does pro tools 11 alert you when an update is released like version 10 did? I keep getting crash reporter messages and I of course fill them in after I save and quit pro tools but as far as I know I have never had any local issues when creating sessions here at home but I wonder if something is getting corrupted? Nick Gawronski On 2/2/2014 6:02 PM, Slau Halatyn wrote: Well, kind of unlikely that a teacher would be giving out 96K sessions when standard resolution would probably do fine for purposes of instruction. That's just my gut feeling. Also, if the files were playing back individually, as Nick mentioned, they probably weren't 96K. Naturally, I could be wrong. Just figured my suggestion would help eliminate variables. Let's see. Slau On Feb 2, 2014, at 6:07 PM, Poppa Bear wrote: Slau, could it be a resolution issue? I can't remember if the 003 only supports up to 96KHZ play back. - Original Message - From: "Slau Halatyn" To: Sent: Sunday, February 02, 2014 1:58 PM Subject: Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD I'd suggest the following: Go into your I/O Setup, press Command-2 for output tab, Command-a to select all outputs and press the Delete Path button. Say OK to the warning and then click the Default button which will create default output paths for your interface. bTW, before doing the above, you might want to make sure your playback engine is set to 003 in your Playback preferences. After hitting OK on the I/O dialog, go to one of your tracks and interact with it. Move down to the output assignment. Bring mouse cursor focus to it. With a physical mouse button or trackpad button, use the Option modifier with a click to set all track outputs to the same selection and choose your main stereo outputs. Slau On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: Hi, I was given a pro tools session by one of my instructors to mess around with but they recorded it on pro tools 8 HD and have now upgraded to 10. When I try to open up the session all of the outputs are set to different outputs on my digi 003 and no matter what I do no audio plays. I can see the wav files and select each one and play them back normally but would like to be able to get all of the tracks like they should be played back. I did go into each track and set them to outputs 1 and 2 but not totally sure if something else is going on that prevents the session from getting played back and I am not getting any errors from pro tools 11 on my system that says this playback engine can't play the files as they are at 44100 sample rate. What can I try to get these files working properly on my system? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribe
Re: Any good mastering plugin out there?
Well i have the understanding eq and compression among others. Let me put it this way, i didn't ask for my money back. On Feb 2, 2014, at 10:22 PM, Blake Hardin wrote: > So Joe Gilders videos are good as well, I have a good handle on > compression but I would like to learn more. So they are worth getting? > > On 2/2/14, TheOreoMonster wrote: >> good to know about the groove3 discount. I just used up a one month free >> trial and while i didn't get in as many tutorials as i would of liked, I >> will say the videos were easy enough to follow for being videos. Joe >> gilder's understanding compression series is pretty good as well and comes >> with both video files and or mp3's so you can just listen along instead of >> watching the videos. >> >> On Feb 2, 2014, at 6:59 AM, CHUCK REICHEL >> wrote: >> >>> Hi Krister, >>> >>> Call or contact, >>> Groove 3 Inc. CALL US: 1-800-460-7509 Groove 3 Inc >>> ord...@groove3.com >>> >>> They have training tutorials on all these topics. >>> Theres one called "compression explained" that will put it all together >>> for you. >>> Tell them Chuck sent you! :) >>> They always give 50% off for the visual thing. >>> They may be $10.00 for that one. >>> YMMV >>> Chuck >>> >>> >>> >>> CHUCK REICHEL >>> soundpicturerecord...@gmail.com >>> www.SoundPictureRecording.com >>> 954-742-0019 >>> Isaiah 26 : 3 >>> Thou wilt keep him in perfect peace, whose mind is stayed on thee: >>> because he trusteth in thee. >>> >>> In GOD I Trust >>> >>> On Feb 2, 2014, at 5:39 AM, Krister Ekstrom wrote: >>> Hi, Hmm, i'm not so good at compression and multi-band compression i'm afraid. I'm not really certain what does what there. I know what the attack and release parameters do but the other ones are a bit confusing to me. I feel like a hopeless case, very silly. /Krister 2 feb 2014 kl. 01:09 skrev Poppa Bear : > Do you have a good handle on compression and multiband compression? > These are must know building blocks for mixing and mastering. > Understanding frequency responses and how they open up not only > individual tracks and instruments, but intire mixes when on a stareo bus > are just as important to understand too. You see, when your mixing a > project you are baking a cake with the right amounts of ingreadients, at > the right temperture and Mastering is the frosting and the decarations > on top. Each part has a seprat process, but they eventually need to > complament each other as a whole. So in this case, if a person tries to > get the mastering down, without the mixing concepts it is like trying to > throw a beautiful topping/icing on acake that taist like crap. > - Original Message - From: "Krister Ekstrom" > > To: > Sent: Saturday, February 01, 2014 9:27 AM > Subject: Re: Any good mastering plugin out there? > > > Thanks, i think that's good advise actually. I probably will have to > learn what plugs do what and what i can use. > /Krister > > 1 feb 2014 kl. 01:10 skrev TheOreoMonster : > >> At this stage in the game i honestly don't think you should be looking >> at any plug ins outside of what pro tools comes with. All the pro tools >> plug ins has presets for most instrument types with a few final >> mix/master presets as well. Presets are a great starting point, but >> learn why they work and how they do what they do. and how to fine tune >> to your song. The stock plug ins are great and there are even popular >> songs that were done entirely with pro tools stock plug ins. Once you >> have a handle on those and have a better idea of what you want, then >> you can start spending money on plug ins with more confidence. First >> step get the best sounds you can before recording. Choosing the right >> virtual synth/drum synth sounds, or moving the one microphone you have >> around till you get the instrument or voice you are trying to record >> sound the best it can before hitting record. Also the firs t Plug in >> to hone in on and learn about is Eq. It will be probably your most used >> tool for both mixing and mastering. you can also grab the quizztones >> iOS app to do some EQ ear training. Next important beast to tackle is >> compression. Come to grips with EQ and compression along with getting >> the best sources of recordings you can and you can get 80% to 90% of >> the way there before you add anything else to your mix or master. >> On Jan 31, 2014, at 4:34 PM, Poppa Bear >> wrote: >> >>> Also, remember this, if you don't have good mixing skills, these >>> Mastering plugins will often only magnify any lack of mixing skills, >>> or even worse, mask the problems leading a person to think they did a >>> good job. At that point the Mastering plugs can become a crutch that >>> cause people to think
Re: Reordering tracks
That works in one session that appears to be normal. What I mean by that is that the clusters are found when you hit vo home. I attempted to make a pretty complex template and instead of the tracks appearing after the clusters and the track list table, they appear before the clusters and the track list table. Both things do not work in the template that you outlined below.They seem to work fine in other sessions though. Which brings me to a related question, if you are importing a big template into a session is there a quick way to select all the tracks to be imported from the template? Right now I have to vo spacebar on each individual track under the destination column in the session data import dialog box. Sent from my iPhone > On Feb 2, 2014, at 5:52 PM, Slau Halatyn wrote: > > Hi Herman, > > Forget about those instructions. You can reorder tracks in two ways: > > First, in the tracks table, navigate to the track name (and not the show/hide > button). Perform a mouse-down with Control-Option-command-shift-Space bar. > Move to the track after which you'd like the dragged track to appear and > press the same key combination for mouse up. > > Second, if the tracks table isn't showing, you can perform the same action > within the Mix window (quite possibly the Edit window as well, although I > haven't checked). Do a mouse down on the track name within the track's > channel strip, stop interacting with the track, move to where you wish to > drop the track and mouse up. Let us know if it works for you. > > Best, > > Slau > >> On Feb 2, 2014, at 3:19 PM, hermanfer...@gmail.com >> wrote: >> >> Has this changed at all and ProTools 10? I cannot reorder tracks in either >> edit or mixed window following the below instructions >> >> Sent from my iPhone >> >>> On Jan 7, 2011, at 7:18 AM, Scott Chesworth >>> wrote: >>> >>> Hey Chuck, >>> >>> Yowza, this is great news, workflow halved. Presumably being able to >>> do this in the tracklist table is new in 8.1 and up, because it >>> definitely didn't work in 8.0.4 when I originally tried it. Still, >>> great to know. >>> >>> Cheers >>> Scott >>> On 1/6/11, Chuck Reichel wrote: Hi Scott & List, I just got this to work in PT 8.1 for reordering tracks in the mix window.. step #1 Just inter act with the track list table. step #2 find the track you want to reorder and "mouse down on it. step 3 using VO move up or down in the track list table till you find where you want to put it. Step 4 "mouse up" on the track and bang! its there just below track you stopped on. At this point the track you just dropped on to its new position is now selected, and it has moved below the track your stopped on! Just another note you do not half to inter act with a track and then stop interacting with it to select the track. You can just "Vo space bar" on it.. to select it. Just use the mac commands for selecting contiguous "Shift click with actual mouse" or non contiguous "Command click with mouse" items in this case tracks in the track list in the mix window in PT. This is going to speed up the work flow immensely!!! Even with the Control-24 I find my self looking at the track list table to absolutely verify that the tracks are selected before I make a group per say.. This keeps the work flow in the track list table! Your Mileage may vary. Chuck > On Sep 22, 2010, at 5:16 AM, Scott Chesworth wrote: > > Folks, > > In addition to all the valuable tips Slau and Chuck replied with, I > thought I should update this thread to say that there's also a > dragging workflow to reorder tracks. > > The following assumes that you're dragging in the mix window: > 1. Interact with the track you want to drag, and use > VO+Command+Shift+Space to mouse-down on the track name field. Note > that at this point, you really do have to be interacted, and it'll > only work on the track name field. > 2. Uninteract, and navigate left or right along the horizontal display > of tracks until you reach the track to the right of where you want the > moving track to be dropped. When you mouse-up in the next step, the > track you're moving will always be dropped to the left of the track VO > is focused on. > 3. Mouse up using VO+Command+Shift+Space again to drop your moving > track. Note that in the mix window, you don't have to be interacted at > dropping stage. > > Should you want to perform this workflow in the edit window, the only > significant differences are: > 1. The track name field is landed upon as soon as you interact with > the tracks > 2. You also have to interact and be focused on the track name field to > drop here for some odd reason. > > Easier than it sounds believe me. Not always the mos
Re: question about playing back a pro tools session I got from school recorded in pro tools 8 HD
I have absolutely no idea why you're not able to play back your session. You can play it in version 10 and not in version 11? On Feb 2, 2014, at 10:38 PM, Nick Gawronski wrote: > Hi, Yes I did that I should have said this in my last message. Should I try > using pro tools 10 to see if it works or is there a method for finding out > what audio files are for what track by looking at the session file as there > are numbered files for each track like bass01.wav and bass02.wav? Can a pro > tools 8 or 11 session be reversed so you can tell what files it uses for each > track outside of pro tools? Nick Gawronski > On 2/2/2014 8:15 PM, Slau Halatyn wrote: >> Did you delete your output paths in the I/O Setup dialog and create new >> default paths? >> >> Slau >> >> On Feb 2, 2014, at 8:56 PM, Nick Gawronski wrote: >> >>> Hi, I manually went to each track and made sure they were all set to >>> outputs one and two and still nothing even when I use the transport >>> controls mainly the return to zero one and then hit play. These files are >>> only CD quality 24 bit as I checked using command and I before I opened >>> them. My teacher even told me this as they told me that recording at the >>> highest possible bit rate and sample rate is not always the best thing to >>> do as it takes up lots of space and not all users have the equipment to >>> play that back. I did make sure mute was not on or solo was not on as >>> voiceover did not tell me this information in 10.9.1 or is this a bug? I >>> am using pro tools 11. Does pro tools 11 alert you when an update is >>> released like version 10 did? I keep getting crash reporter messages and I >>> of course fill them in after I save and quit pro tools but as far as I know >>> I have never had any local issues when creating sessions here at home but I >>> wonder if something is getting corrupted? Nick Gawronski >>> On 2/2/2014 6:02 PM, Slau Halatyn wrote: Well, kind of unlikely that a teacher would be giving out 96K sessions when standard resolution would probably do fine for purposes of instruction. That's just my gut feeling. Also, if the files were playing back individually, as Nick mentioned, they probably weren't 96K. Naturally, I could be wrong. Just figured my suggestion would help eliminate variables. Let's see. Slau On Feb 2, 2014, at 6:07 PM, Poppa Bear wrote: > Slau, could it be a resolution issue? I can't remember if the 003 only > supports up to 96KHZ play back. > - Original Message - From: "Slau Halatyn" > To: > Sent: Sunday, February 02, 2014 1:58 PM > Subject: Re: question about playing back a pro tools session I got from > school recorded in pro tools 8 HD > > > I'd suggest the following: > > Go into your I/O Setup, press Command-2 for output tab, Command-a to > select all outputs and press the Delete Path button. Say OK to the > warning and then click the Default button which will create default > output paths for your interface. bTW, before doing the above, you might > want to make sure your playback engine is set to 003 in your Playback > preferences. > > After hitting OK on the I/O dialog, go to one of your tracks and interact > with it. Move down to the output assignment. Bring mouse cursor focus to > it. With a physical mouse button or trackpad button, use the Option > modifier with a click to set all track outputs to the same selection and > choose your main stereo outputs. > > Slau > > On Feb 2, 2014, at 5:39 PM, Nick Gawronski wrote: > >> Hi, I was given a pro tools session by one of my instructors to mess >> around with but they recorded it on pro tools 8 HD and have now upgraded >> to 10. When I try to open up the session all of the outputs are set to >> different outputs on my digi 003 and no matter what I do no audio plays. >> I can see the wav files and select each one and play them back normally >> but would like to be able to get all of the tracks like they should be >> played back. I did go into each track and set them to outputs 1 and 2 >> but not totally sure if something else is going on that prevents the >> session from getting played back and I am not getting any errors from >> pro tools 11 on my system that says this playback engine can't play the >> files as they are at 44100 sample rate. What can I try to get these >> files working properly on my system? Nick Gawronski >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. > -- > You recei
Re: Reordering tracks
Hi Herman, I'm not a template user myself so I can't suggest anything on that front. One other thing I'd suggest is to try zooming the window. I've encountered session files where the mix window was so small and off to the side that it made it especially difficult to navigate. Slau On Feb 3, 2014, at 12:16 AM, hermanfer...@gmail.com wrote: > That works in one session that appears to be normal. What I mean by that is > that the clusters are found when you hit vo home. I attempted to make a > pretty complex template and instead of the tracks appearing after the > clusters and the track list table, they appear before the clusters and the > track list table. Both things do not work in the template that you outlined > below.They seem to work fine in other sessions though. > Which brings me to a related question, if you are importing a big template > into a session is there a quick way to select all the tracks to be imported > from the template? Right now I have to vo spacebar on each individual track > under the destination column in the session data import dialog box. > > Sent from my iPhone > >> On Feb 2, 2014, at 5:52 PM, Slau Halatyn wrote: >> >> Hi Herman, >> >> Forget about those instructions. You can reorder tracks in two ways: >> >> First, in the tracks table, navigate to the track name (and not the >> show/hide button). Perform a mouse-down with >> Control-Option-command-shift-Space bar. Move to the track after which you'd >> like the dragged track to appear and press the same key combination for >> mouse up. >> >> Second, if the tracks table isn't showing, you can perform the same action >> within the Mix window (quite possibly the Edit window as well, although I >> haven't checked). Do a mouse down on the track name within the track's >> channel strip, stop interacting with the track, move to where you wish to >> drop the track and mouse up. Let us know if it works for you. >> >> Best, >> >> Slau >> >>> On Feb 2, 2014, at 3:19 PM, hermanfer...@gmail.com >>> wrote: >>> >>> Has this changed at all and ProTools 10? I cannot reorder tracks in either >>> edit or mixed window following the below instructions >>> >>> Sent from my iPhone >>> On Jan 7, 2011, at 7:18 AM, Scott Chesworth wrote: Hey Chuck, Yowza, this is great news, workflow halved. Presumably being able to do this in the tracklist table is new in 8.1 and up, because it definitely didn't work in 8.0.4 when I originally tried it. Still, great to know. Cheers Scott > On 1/6/11, Chuck Reichel wrote: > Hi Scott & List, > > I just got this to work in PT 8.1 for reordering tracks in the mix > window.. > step #1 Just inter act with the track list table. > step #2 find the track you want to reorder and "mouse down on it. > step 3 using VO move up or down in the track list table till you find > where you want to put it. > Step 4 "mouse up" on the track and bang! its there just below track > you stopped on. > > At this point the track you just dropped on to its new position is now > selected, and it has moved below the track your stopped on! > > Just another note you do not half to inter act with a track and then > stop interacting with it to select the track. > You can just "Vo space bar" on it.. to select it. > Just use the mac commands for selecting contiguous "Shift click with > actual mouse" or non contiguous "Command click with mouse" items in > this case tracks in the track list in the mix window in PT. > This is going to speed up the work flow immensely!!! > Even with the Control-24 I find my self looking at the track list > table to absolutely verify that the tracks are selected before I make > a group per say.. > This keeps the work flow in the track list table! > Your Mileage may vary. > Chuck > > >> On Sep 22, 2010, at 5:16 AM, Scott Chesworth wrote: >> >> Folks, >> >> In addition to all the valuable tips Slau and Chuck replied with, I >> thought I should update this thread to say that there's also a >> dragging workflow to reorder tracks. >> >> The following assumes that you're dragging in the mix window: >> 1. Interact with the track you want to drag, and use >> VO+Command+Shift+Space to mouse-down on the track name field. Note >> that at this point, you really do have to be interacted, and it'll >> only work on the track name field. >> 2. Uninteract, and navigate left or right along the horizontal display >> of tracks until you reach the track to the right of where you want the >> moving track to be dropped. When you mouse-up in the next step, the >> track you're moving will always be dropped to the left of the track VO >> is focused on. >> 3. Mouse up using VO+Command+Shift+Space again to drop your moving >> track. No
Re: Where can I address the following issue?
Hi Slau, I only want to insert a clip out of the clip list into an empty track. Best Stefan Am 02.02.2014 um 17:07 schrieb Slau Halatyn : > Hi Stefan, > > What operations can't you perform? You can interact with the table, select a > clip, move out of the table, go to the Regions pop-up button (which is not > labelled as a button but simply "Regions label) , click and select whatever > option you'd like to perform. While you're at it, the shortcuts for some of > the options are handy to memorize. > > Best, > > Slau > > On Feb 2, 2014, at 8:57 AM, Stefan Albertshauser > wrote: > >>> Hi all, >> >> I'd like to address the following issue: While the mouse pointer in Pro >> Tools 10 can be controlled to a clip in the clip list with VO + Command + >> F5, in Pro tools 11 the case is not. I think, that's, why the operations in >> the clip list don't work in Pro tools 11. Do you have any idea, where to >> address this issue at Avid or Apple? >> >> Thanks for help >> >> Stefan >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
