[Qgis-user] QGIS on Citrix

[Phil Wyatt]

Hi Folks,

 

I am wondering if anyone has some good documentation on installing QGIS3 in
a citrix environment. When 3.4 becomes the Long Term Release I will be
working with an organisation to get them setup. I am particularly interested
on how to setup for shared plugins and stores for WMS, WFS etc.

 

Any documentation appreciated

 

Cheers - Phil

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] area units

[Phil Wyatt]

Metres squared/10,000 equals hectares. You can calculate this via an expression 
and add it as a new attribute

Cheers - Phil, 


> On 1 Oct 2018, at 9:22 pm, Boaz Bar Ilan  wrote:
> 
> hi
> what is the way to show area units not on kilometer square and not as meter 
> square but as meter square /1000 ? 
> thanks
> boaz
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Live GPS Tracking Settings (QGIS 2.14)

[Phil Wyatt]

Hi Malhar,

 

No, I don’t believe there are any ways to edit the GPS information as per your 
requests. If these features are a high priority for you then maybe consider 
supporting a developer to make some changes to the base code to allow changes 
to the GPS and the trail. I suspect Lat/Lon is the standard for most GPS’s but 
again a developer may be able to set options for other NMEA sentences.

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of malhar
Sent: Wednesday, 24 October 2018 11:26 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] QGIS Live GPS Tracking Settings (QGIS 2.14)

 

Hello all,

 

I am currently using the QGIS (2.14) live GPS tracker for a project. I have a 
few questions regarding the settings for the live tracking feature.

 

1) Is there a way to change the latitude and longitude units from decimal 
degrees to degrees and decimal minutes in the "GPS Information Panel?"

 

2) Is there a way to change the symbol of a cross within a circle to an 
airplane?

 

3) Is there a way to change the trail of the aircraft so it only shows the 
previous 10 minutes of flight, yet have the log file show the entire flight 
route?

 

Thank you very much for your help.

 

Sincerely,

Malhar

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Question

[Phil Wyatt]

Hi Mayank,

 

What sort of information were you hoping to gain from Google? The underlying 
imagery that can be used to digitise features into Open Street Map is often as 
up to date as Google. Maybe you could contact local OSM or Humanitarian teams 
and support adding further information to Open Street Map.

 

If you want to look at Google imagery in QGIS then you can do so from the Quick 
Map Services plugin.

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of mayank 
agarwal
Sent: Thursday, 1 November 2018 4:51 PM
To: cliff...@snowandsnow.us
Cc: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] Question

 

Thank you for replying.

I was working on a detailed map development of a certain state (Andhra Pradesh)

 in India. This would be useful in disaster management and would be accessible 
by all. 

Openstreetmap does not provide detailed features of the place that is why 
wanted to check if someone has found a way to use google information.

Any leads in this regards are appreciated

 

Mayank

 

On Thu, Nov 1, 2018 at 11:14 AM Clifford Snow  wrote:

I don't believe it's possible to get Google data. Which is one of the reasons 
for the success of OSM. 

 

For my curiosity, what Google data do you want that's not in OSM?

 

Clifford

 

On Wed, Oct 31, 2018 at 10:27 PM mayank agarwal  
wrote:

Hello,

 

I want to import data from Google earth in form of points, lines and polygons 
like we do it from OSM. How can I do that? Please help I am new to GIS. 

 

Regards

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user




 

-- 

@osm_seattle

osm_seattle.snowandsnow.us

OpenStreetMap: Maps with a human touch

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Label positioning options

[Phil Wyatt]

Hi Tomas,

I managed to find this online if you are looking for techie understanding of 
the labelling placement methods.

https://www.ee.co.za/wp-content/uploads/legacy/PositionIT%202009/PAL_PositIT_Jul09_p56-61.pdf
 

Cheers - Phil

-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Tomas 
Straupis
Sent: Sunday, 2 December 2018 3:33 AM
To: qgis-user ML
Subject: [Qgis-user] Label positioning options

Hello

  In layer option label tab there is a button in the upper right corner (see 
attached picture).
  It opens automated label positioning options menu.
  
https://docs.qgis.org/testing/en/docs/user_manual/working_with_vector/vector_properties.html#setting-the-automated-placement-engine

  I have two questions about it:
  1. Where can I find description of used methods: Chain, Popmusic Tabu/Chain, 
FALP
  2. Is there a reason why this dialog is so hidden? I was asked about option 
to show partial labels (on by default) a number of times when people simply 
could not find where to switch it off :-)

  Thank you

--
Tomas

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3.4.2 still very slow to work in Windows 10

[Phil Wyatt]

BINGO! That’s a lot faster startup!

> My guess is that the initialization of the python plugins runs very, very 
> slow on the Windows pc. So the culprit may be the python interpreter on 
> Windows.

This sounds like a known issue since ages (v 2.6?), where at QGIS
startup the Processing plugin parses all the hundreds of description
files for the SAGA/GRASS algorithms. You can verify by disabling the
Processing plugin and relaunching.

Nyall
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] KML into map

[Phil Wyatt]

Hi Folks,

 

I seem to remember that you could drag and drop kml's onto the map but this
no longer seems to work. Does anyone know what has changed? No longer works
in 2.18 or 3.4.

 

In particular I am looking at live feeds. I can however open the feeds using
the URL's within the kml via vector/URL etc

 

Cheers - Phil



gearth.kml
Description: application/vnd.google-earth.kml
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3.4.3 becoming unusable for me on Windows 10

[Phil Wyatt]

Hi Folks,

I am on Win10 64bit, Intel i7 7700 CPU @ 3.60Ghz 16Gb RAM

Start up time is about 8 seconds with Samsung EVO 500Gb SSD main drive (and 
multiple 4tb extra drives)

I think it might be better to tell us something about the individual projects 
and how they are organised. Shapefiles, networked, size of files, rasters, 
number of records etc etc?

Cheers - Phil


-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of David 
Addy
Sent: Wednesday, 9 January 2019 5:19 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] QGIS 3.4.3 becoming unusable for me on Windows 10

Ever since release 3.4.1 QGIS has been a disaster for me, running on Windows
10.
After I upgraded to 3.4.2 I still had problems with everything running very
slowly. (See my post below - 
QGIS 3.4.2 still very slow to work in Windows 10 by David Addy)

Now on 3.4.3 the same issues seem to be continuing, with the odd crash added
in for good measure.
Opening QGIS on Windows 10 always takes over half a minute before anything
happens apart from the outline box of the QGIS window full of blank space.
Once a project finally loads up any random operation  gets the "QGIS not
responding" message. 
I can scan a map without any problem, moving it around works fine, as does
zooming in and out. But if I want to amend the contents of the attribute
table or change a style in the Layer Properties I get “QGIS is not
responding”. After a long delay it may respond correctly.
This can result in further issues because I may try pressing buttons to get
a response.  After long frustration it might decide to crash.
I use the stand -alone version of 64 bit Windows package, which loads with
QT 5.11.2.
I run a 16 gb computer with Intel i7 processor. It seems to make no
difference whether I have my Kaspersky Security Suite turned on or off.
Frustratingly,   some other users apparently experience no problems with
Windows on QGIS.
Ubuntu users are ecstatic – they work lovely.
If you are on Windows 10 and are still having these sort of issues on QGIS
3.4.3 it would be very helpful if you could add a note to this thread so we
can gauge the numbers involved.  Useful also if you can note whether you use
the standalone package, 64 or 32 bit, and the QT package installed.
Thanks very much.

Sorry to complain, but I just cannot bear to run any work at the moment.




--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QLD Events feed

[Phil Wyatt]

HI Folks

 

With the current flooding in QLD I am trying to use the following feed (with
public api key)
https://api.qldtraffic.qld.gov.au/v1/events?apikey=3e83add325cbb69ac4d8e5bf4
33d770b  but it fails to load in QGIS. Can anyone tell me why? It looks fine
if I paste the geojson into http://geojson.io/  but fails validation in
http://geojsonlint.com/

 

Any clues on how I might get it work in QGIS?

 

Cheers - Phil

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QLD Events feed

[Phil Wyatt]

OK reason was - Cannot open
https://api.qldtraffic.qld.gov.au/v1/events?apikey=3e83add325cbb69ac4d8e5bf4
33d770b.(SSL certificate problem: unable to get local issuer certificate) 

 

Back to the data supplier.

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Phil
Wyatt
Sent: Monday, 4 February 2019 1:08 PM
To: Qgis-user@lists.osgeo.org
Subject: [Qgis-user] QLD Events feed

 

HI Folks

 

With the current flooding in QLD I am trying to use the following feed (with
public api key)
https://api.qldtraffic.qld.gov.au/v1/events?apikey=3e83add325cbb69ac4d8e5bf4
33d770b  but it fails to load in QGIS. Can anyone tell me why? It looks fine
if I paste the geojson into http://geojson.io/  but fails validation in
http://geojsonlint.com/

 

Any clues on how I might get it work in QGIS?

 

Cheers - Phil

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Attribute form images - viewed in the attribute table

[Phil Wyatt]

-Original Message-
From: Lene Fischer [mailto:l...@ign.ku.dk] 
Sent: Tuesday, 12 February 2019 10:00 PM
To: Phil Wyatt
Cc: qgis-user@lists.osgeo.org
Subject: Attribute form images - viewed in the attribute table

Hi Phil,
I found that solution too just after writing the mail.
Now I have to change my question:

In the Attribute form, I have defined one of the fields as a widget as 
attribute/Images.

If I click with the Info button it is viewed perfect with both normal letters, 
numbers and an image.
How do I view the same in the attribute table ?

Regards
Lene Fischer

-Oprindelig meddelelse-
Fra: Phil Wyatt [mailto:p...@wyatt-family.com] 
Sendt: 12. februar 2019 11:53
Til: Lene Fischer
Cc: qgis-user@lists.osgeo.org
Emne: Re: [Qgis-user] Legend using images

Hi Lene,

It’s certainly possible to use svg images in legends. I do this frequently with 
categorised layers using images for the categories


Cheers - Phil, 
On the road with his iPad 

> On 12 Feb 2019, at 9:38 pm, Lene Fischer  wrote:
> 
> Hi,
> A question about a legend. Is it possible to add images to legends.
> 
> Regards
> 
> 
> Lene Fischer
> Associate Professor
> 
> University of Copenhagen
> Department of Geoscience and Natural Resource Management
> Forest and Landscape College
> Nødebovej 77a
> 3480 Fredensborg
> Denmark
> 
> 
> MOB +45 40115084
> l...@ign.ku.dk
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Legend using images

[Phil Wyatt]

Hi Lene,

It’s certainly possible to use svg images in legends. I do this frequently with 
categorised layers using images for the categories


Cheers - Phil, 
On the road with his iPad 

> On 12 Feb 2019, at 9:38 pm, Lene Fischer  wrote:
> 
> Hi,
> A question about a legend. Is it possible to add images to legends.
> 
> Regards
> 
> 
> Lene Fischer
> Associate Professor
> 
> University of Copenhagen
> Department of Geoscience and Natural Resource Management
> Forest and Landscape College
> Nødebovej 77a
> 3480 Fredensborg
> Denmark
> 
> 
> MOB +45 40115084
> l...@ign.ku.dk
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Attribute form images - viewed in the attribute table

[Phil Wyatt]

Mmmm - not sure that is possible - I would need to search for an answer to that 
one.

You might also consider html popups maybe?

https://gis.stackexchange.com/questions/123675/getting-image-pop-ups-in-qgis 

Cheers - Phil

-Original Message-
From: Lene Fischer [mailto:l...@ign.ku.dk] 
Sent: Tuesday, 12 February 2019 10:00 PM
To: Phil Wyatt
Cc: qgis-user@lists.osgeo.org
Subject: Attribute form images - viewed in the attribute table

Hi Phil,
I found that solution too just after writing the mail.
Now I have to change my question:

In the Attribute form, I have defined one of the fields as a widget as 
attribute/Images.

If I click with the Info button it is viewed perfect with both normal letters, 
numbers and an image.
How do I view the same in the attribute table ?

Regards
Lene Fischer

-Oprindelig meddelelse-
Fra: Phil Wyatt [mailto:p...@wyatt-family.com] 
Sendt: 12. februar 2019 11:53
Til: Lene Fischer
Cc: qgis-user@lists.osgeo.org
Emne: Re: [Qgis-user] Legend using images

Hi Lene,

It’s certainly possible to use svg images in legends. I do this frequently with 
categorised layers using images for the categories


Cheers - Phil, 
On the road with his iPad 

> On 12 Feb 2019, at 9:38 pm, Lene Fischer  wrote:
> 
> Hi,
> A question about a legend. Is it possible to add images to legends.
> 
> Regards
> 
> 
> Lene Fischer
> Associate Professor
> 
> University of Copenhagen
> Department of Geoscience and Natural Resource Management
> Forest and Landscape College
> Nødebovej 77a
> 3480 Fredensborg
> Denmark
> 
> 
> MOB +45 40115084
> l...@ign.ku.dk
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] North arrow in QGIS

[Phil Wyatt]

Hi Hugo,

 

The current procedure is about that easy (in map composer) – if you only want a 
north arrow on the map window then try View, Decorations, North Arrow (plus any 
of the other decorations). If you are after just simple maps then this is the 
easy way and you can then export the map window as an image or PDF

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hugo 
Paul
Sent: Wednesday, 13 February 2019 4:12 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] North arrow in QGIS

 

Good day

 

I was wondering if there is a more efficient method for adding a north arrow to 
a map layout in QGIS than adding an image?

 

Something as simple as just clicking somewhere add -> north arrow, and then 
being able to choose various styles.

 

Is something like this available?

 

Thanks 

Hugo

 

 

 

Disclaimer 

The information contained in this communication from the sender is 
confidential. It is intended solely for use by the recipient and others 
authorized to receive it. If you are not the recipient, you are hereby notified 
that any disclosure, copying, distribution or taking action in relation of the 
contents of this information is strictly prohibited and may be unlawful. 

This email has been scanned for viruses and malware, and automatically archived 
by Mimecast SA (Pty) Ltd, an innovator in Software as a Service (SaaS) for 
business. Mimecast Unified Email Management ™ (UEM) offers email continuity, 
security, archiving and compliance with all current legislation. To find out 
more, contact Mimecast  . 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] North arrow in QGIS

[Phil Wyatt]

PS – if you open Search Directories there a whole heap of north arrows to 
choose from

 



 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hugo 
Paul
Sent: Wednesday, 13 February 2019 4:12 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] North arrow in QGIS

 

Good day

 

I was wondering if there is a more efficient method for adding a north arrow to 
a map layout in QGIS than adding an image?

 

Something as simple as just clicking somewhere add -> north arrow, and then 
being able to choose various styles.

 

Is something like this available?

 

Thanks 

Hugo

 

 

 

Disclaimer 

The information contained in this communication from the sender is 
confidential. It is intended solely for use by the recipient and others 
authorized to receive it. If you are not the recipient, you are hereby notified 
that any disclosure, copying, distribution or taking action in relation of the 
contents of this information is strictly prohibited and may be unlawful. 

This email has been scanned for viruses and malware, and automatically archived 
by Mimecast SA (Pty) Ltd, an innovator in Software as a Service (SaaS) for 
business. Mimecast Unified Email Management ™ (UEM) offers email continuity, 
security, archiving and compliance with all current legislation. To find out 
more, contact Mimecast  . 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] North arrow in QGIS

[Phil Wyatt]

...and then you also have the users that have templates with built in North 
arrows who really don’t have to worry too much after initial template design.

I LOVE the fact that I have full control to do it any way I like!

Cheers - Phil

-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
Benjamin Ducke
Sent: Wednesday, 13 February 2019 7:56 PM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] North arrow in QGIS

Hi,

On 13/02/2019 09:30, Micha Silver wrote:
> 
> On 2/13/19 9:41 AM, Frank Sokolic wrote:
>> Hi,
>>
>> I think from a user point of view the north arrow is not considered to
>> be an image so having a separate north-arrow item makes good sense. I
>> find the current method of adding a north arrow confusing as it
>> requires the user  to know the following:
>> (a) North arrows are not added by clicking "Add Arrow"
>> (b) North arrows are added by clicking "Add Picture"
>> (c) North arrows are in the "Search Directories" section of the image
>> properties but this section is collapsed by default so the user has to
>> know that they must open this section and then scroll to the north arrows
> 
> 
> I have no problem with the "Add Picture" approach but it would be better
> to have the "Search Directories" displayed by default. It's not at all
> obvious (surely not to a new user) that you have to expand that panel in
> order to find the north arrow images.

Some empirical remarks, from observing users
that understand cartography, but not technical
UI design decisions:

Out of the ~200 people that I have trained on
QGIS, ~100% did have trouble finding a way
to insert a north arrow into a map layout.
About ~75% of them clicked on "Add Arrow",
and some of those were quite satisfied with
the result; so in the future, expect to see many
maps created with QGIS that have ordinary arrows
adorning them, which more or less point
northwards!

There are various reasons why the current
method does not work in practice:

- people do not think of a north arrow
as an ordinary picture; they think of it
(and rightly so) as a cartographic element
with the same rank as a scale bar; after
all, like a scale bar, it has a dynamic
property (its orientation)

- some think of a "north arrow" as an
"arrow" (which leads to: see above)

- "ordinary images" are inserted into a
layout by using the "Add Picture" function;
that leaves people wondering where to find
north arrow pictures, and they wander of
to Google to find some...

So the complete mental chain here is:

north arrow -> picture -> built-in picture

... and that just leaves people totally
stranded (never mind the fact that the UI
element for browsing shipped images is
collapsed by default, so people will just
scroll past it; and that there is a lag
of sometimes several seconds between clicking
on the tiny triangle and getting to see
actual images; so people will scroll past
it again; and that "Search Directories" is
a UI label that most people don't associate
with anything useful...).

In my view, this is a part of the UI that is
conceptually broken in about half a dozen places,
and there should be a dedicated north arrow
tool "Add North Arrow", exactly where it should
be, i.e. right next to "Add Scalebar".

Best,

Benjamin

> 
> 
>>
>> I don't find this very intuitive.
>>
>> Regards, Frank.
>>
>> On 2019/02/13 09:12, Andreas Neumann wrote:
>>>
>>> Hi Hugo,
>>>
>>> I was initially also puzzled by the fact there is no "north-arrow"
>>> item for the layout. But if you think about it a bit longer, than you
>>> realize, that it is just as efficient adding an image and synchronize
>>> the rotation to one chosen map, than it is to add a north-arrow,
>>> choose an image and synchronize it with a chosen map.
>>>
>>> Do you really think, having a separate item for north-arrow is more
>>> efficient? How many clicks do you save by having a separate item?
>>>
>>> Greetings,
>>>
>>> Andreas
>>>
>>> Am 13.02.19 um 06:11 schrieb Hugo Paul:

 Good day

  

 I was wondering if there is a more efficient method for adding a
 north arrow to a map layout in QGIS than adding an image?

  

 Something as simple as just clicking somewhere add -> north arrow,
 and then being able to choose various styles.

  

 Is something like this available?

  

 Thanks

 Hugo

  

  



 *Disclaimer*

 The information contained in this communication from the sender is
 confidential. It is intended solely for use by the recipient and
 others authorized to receive it. If you are not the recipient, you
 are hereby notified that any disclosure, copying, distribution or
 taking action in relation of the contents of this information is
 strictly prohibited and may be unlawful.

 This email has been scanned for viruses and malware, and
 automatically archived by *Mimecast SA (Pty) Ltd*, an innovator in

Re: [Qgis-user] Qgis 3.6 problem

[Phil Wyatt]

Check the CRS and set it to the raster data and see how you go. I think V3 does 
on the fly projections all the time. In 2.18 you need to set that under 
settings, options, CRS.


Cheers - Phil, 
On the road with his iPad 

> On 6 Mar 2019, at 6:08 pm, Jukka  wrote:
> 
> Hi,
> I have two version of Qgis, 3,6 and 2.18. In  both version I have problems. I 
> started a new project and if I add raster layer map and vector layer on map, 
> I only can see the map or vector layer, not both. But I have older projects 
> that works allright. What is the problem?
> 
> -Jukka Olanterä
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qgis 3.6 problem

[Phil Wyatt]

Can you pint us to the actual links on the web for the layers? Feel free to
send me the raster layer as well if you like if its not on the web.

 

Cheers - Phil

 

From: Jukka [mailto:ju...@olantera.fi] 
Sent: Thursday, 7 March 2019 8:42 PM
To: Phil Wyatt
Cc: Nicolas Cadieux; qgis-user@lists.osgeo.org
Subject: VS: VS: [Qgis-user] Qgis 3.6 problem

 

Hi, 

I am using Finnish open data by Finnish Transport Network and National Land
Survey of Finland. Do you want me to send you a map(png-format) witch is
raster layer?  I installed Qgis 3.45 to my laptop and vector layers are seen
by Finnish Transport Network and Google Maps exported kmz-file, but when I
add map layer, it does not show map.  but everything else. The order of
layers are OK- When I do the same with my main pc, it does not show any
layers.

 

-Jukka

  _  

Lähettäjä: Phil Wyatt [p...@wyatt-family.com]
Lähetetty: 7. maaliskuuta 2019 10:23
Vastaanottaja: Jukka
Kopio: Nicolas Cadieux; qgis-user@lists.osgeo.org
Aihe: Re: VS: [Qgis-user] Qgis 3.6 problem

Can you point us to the layers? Are they open data? At least then we can
check them out and see what we can find.

 

Cheers - Phil,  

On the road with his iPad 


On 7 Mar 2019, at 6:59 pm, Jukka  wrote:

Hi, 

I can't figure out what is the problem. I have other projects which works
allrigt. I made a new project with same layers and properties than earlier
and is is not working.  I agree that the problem is bad CRS, but I cannot
resolve it.

-Jukka


  _  


Lähettäjä: Nicolas Cadieux [nicolas.cadi...@archeotec.ca]
Lähetetty: 6. maaliskuuta 2019 16:14
Vastaanottaja: Jukka
Kopio: Phil Wyatt; qgis-user@lists.osgeo.org
Aihe: Re: [Qgis-user] Qgis 3.6 problem

Hi,

 

This is 99 % a bad CRS problem or a layer that has the right CRS but is
badly georeferenced. Open a background layer with a WMS or from a satellite
image from a plugin like OpenLayer.  This layer should be in the right
place.  Then open each layer and click zoom to layer extent (right click on
the layer in the layer panel).  You will find the layer that is not
correctly georeferenced or that has an incorrect CRS. 

 

Phil is correct when saying that in 3x, on the fly default. You may want to
select « ask  what to do » if a CRS is not specified in the layer.  Your
choice my be «  use the project or use the default CRS ».  That may throw
things off.

 

Nicolas

 


Le 6 mars 2019 à 07:08, Jukka  a écrit :

Hi, 

It didn't help. I checked layers CRS in both versions. I am confused,
because I have mene other projects and all are working perfect.

 

-Jukka


  _  


Lähettäjä: Phil Wyatt [p...@wyatt-family.com]
Lähetetty: 6. maaliskuuta 2019 10:47
Vastaanottaja: Jukka
Kopio: qgis-user@lists.osgeo.org
Aihe: Re: [Qgis-user] Qgis 3.6 problem

Check the CRS and set it to the raster data and see how you go. I think V3
does on the fly projections all the time. In 2.18 you need to set that under
settings, options, CRS.

 

Cheers - Phil,  

On the road with his iPad 


On 6 Mar 2019, at 6:08 pm, Jukka  wrote:

Hi, 

I have two version of Qgis, 3,6 and 2.18. In  both version I have problems.
I started a new project and if I add raster layer map and vector layer on
map, I only can see the map or vector layer, not both. But I have older
projects that works allright. What is the problem?

 

-Jukka Olanterä

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] problem with older version

[Phil Wyatt]

Hi Boaz,

 

When the layers didn’t appear when opening in the old version of QGIS, did you 
get any error message? Generally if a layer in a project cannot be found you 
get the opportunity to find it and reinstate it in the projects (handle bad 
layers).

 

Maybe in the newer version of QGIS you have ‘relative file paths’ set versus 
‘full file path’ – This is under PROJECT settings – Project, Settings, General 
tab, Save Paths

 



 

There are now a multitude of reasons why you may not be able to fully open a 
3.4 project in 2.18, especially when it comes to how layers are styled.

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Boaz 
Bar Ilan
Sent: Monday, 27 May 2019 6:22 PM
To: qgis-user
Subject: [Qgis-user] problem with older version

 

hi

 

I use win 10 

I used to work with  few previous versions of qgis  in the last 3 years

 few month ago I started using 3.4.5 and set out a  new project with this 
version

out of several reasons ( problem with synch my layers with the the local survey 
), I tried to use again 2.18.26 ( las palmas) 

while trying to open the last  project  ( which  I did with 3.4.5 ) I was 
amazed to see that   while opening the project, apart of  5 layer /directories 
out of 32 directories and dozens of sub directories and layers

the layers that did appear don't have something in common  in relation to what 
didn't appear.

I hope that I covered enough to get your help

I don't know what to write more

thanks

 boaz

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Plugins Repository

[Phil Wyatt]

Hi Folks,

 

I seem to be having issues connecting to plugin repository. Is there some
update occurring or other issue at the moment? Can someone else confirm
please.

 

https://plugins.qgis.org/plugins/plugins.xml?qgis=3.6 

 

Cheers - Phil

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Date formula in Layout label

[Phil Wyatt]

Hi Patrick,

 

Try changing the double quotes to single quotes and I think it should work (in 
QGIS3)

 

format_date( $now,'-MM-dd HH:mm')

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Patrick 
Dunford
Sent: Monday, 10 June 2019 8:31 PM
To: qgis-user ML
Subject: [Qgis-user] Date formula in Layout label

 

Good day

When I create a layout and put a text label in it I want to be able to show the 
current date using a formula. This formula can look something like 
[%format_date( $now,"-MM-dd HH:mm")%]

I have to put this in square brackets so that the formula is executed instead 
of it just appearing as plain text. However when displayed on the page, the 
square brackets are included in the output. How do I get rid of them so that I 
just have the numbers of the date and time displayed? 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Download complete setup for QGIS 3.8.0

[Phil Wyatt]

Hi Jean,

 

Simply pick your operating system from here and follow the install instructions 
as directed.

 

https://qgis.org/en/site/forusers/download.html

 

Latest release is 3.8 and Long term release is 3.4.x

 

 

Cheers - Phil

 

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of jean 
Lukusa
Sent: Saturday, 29 June 2019 7:15 PM
To: Qgis Users List
Subject: [Qgis-user] Download complete setup for QGIS 3.8.0

 

Hi all. Can  you  help  me  to download  complete  setup  for QGIS 3.8.0 ?

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Dropping the extra label placement algorithms?

[Phil Wyatt]

Hi Nyall,

Took me a while but I found this, that may provide some enlightenment ..

http://pal.heig-vd.ch/index.php?page=support 

Having said that I will bow to your superior knowledge and let you do whatever 
you want - I am but a humble user in awe of your coding abilities! :-) :-)

Cheers - Phil

-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Nyall 
Dawson
Sent: Friday, 26 July 2019 12:40 PM
To: qgis-developer; qgis-user
Subject: [Qgis-user] Dropping the extra label placement algorithms?

Hey lists

This was first discussed back in 2016 (see
http://osgeo-org.1560.x6.nabble.com/Removal-of-labeling-search-methods-td5262743.html),
but would anyone object if the different labeling solution algorithms
eg "chain" / "pop music" / "falp" / etc were dropped, and we just
leave the existing default (chain)?

I don't think ANYONE knows what these mean, and it's a heck of a lot
of code (which needs fixes) to cart around for no compelling reason
that I can see.

I have no particular preference to any of the methods, so would
happily accept a different default if anyone out there can point to
which method is best!

Googling pop music / tabu / chain only gives a handful of results
relating to QGIS labeling engine. And googling for "falp" sounds like
something that would get you flagged on your company's firewall.

Does ANYONE understand or change this setting? Or would object to its
complete removal?

Nyall
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil Wyatt]

What version of QGIS are you using, how are you loading the plugin, and what 
error messages are you receiving?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Akbar 
Ahmadi
Sent: Tuesday, 20 August 2019 4:03 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)

 

Dear Sir

 

I cannot install Lizmap plugin can you assist me to install it?

 

 

Best Regards,

Akbar Ahmadi

Akbar Ahmadi

Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com   

Skype  akbarahmady2002

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil Wyatt]

As QGIS 2.X is no longer supported I would start by updating to at least the 
latest long term release version (3.4.11 for windows) and having another try at 
loading the plugin.

 

https://qgis.org/en/site/forusers/download.html

 

Version 3 will load to a new directory if you accept all the defaults.

 

Cheers - Phil

 

 

From: Akbar Ahmadi [mailto:akbarahmady2...@gmail.com] 
Sent: Tuesday, 20 August 2019 4:17 PM
To: Phil Wyatt; qgis-user@lists.osgeo.org
Subject: RE: [Qgis-user] (no subject)

 

I use QGIS 2.4.0 version 

And error message are in enclosed file

 

 

 

Best Regards,

Akbar Ahmadi

Akbar Ahmadi

Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com   

Skype  akbarahmady2002

 

From: Phil Wyatt <mailto:p...@wyatt-family.com> 
Sent: Tuesday, August 20, 2019 10:45 AM
To: 'Akbar Ahmadi' <mailto:akbarahmady2...@gmail.com> ; 
qgis-user@lists.osgeo.org
Subject: RE: [Qgis-user] (no subject)

 

What version of QGIS are you using, how are you loading the plugin, and what 
error messages are you receiving?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Akbar 
Ahmadi
Sent: Tuesday, 20 August 2019 4:03 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)

 

Dear Sir

 

I cannot install Lizmap plugin can you assist me to install it?

 

 

Best Regards,

Akbar Ahmadi

Akbar Ahmadi

Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com   

Skype  akbarahmady2002

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Print Layout Options

[Phil Wyatt]

Hi Grant,

 

Mmmm, maybe use the map item extents and a data defined override (if the
layer has fields for the extent?). A few tips in the link below.

 

https://gis.stackexchange.com/questions/267565/qgis-print-composer-set-map-f
rame-to-map-extent

 

Also, is this a one off map or are you also contemplating an atlas from lots
of maps with different aspect ratios?

 

Cheers - Phil

 

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
Grant Boxer
Sent: Friday, 30 August 2019 11:12 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Print Layout Options

 

Is there a way I can snap a map window in a print layout to fit a layer
extent? For example I want the print layout window to fit the extent of a
map (e.g. published 1:100k series map) so that the coordinates go outside
the map frame without white space. Any thoughts?

 

Grant Boxer

Perth, Western Australia

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] how to rotate a grid

[Phil Wyatt]

Hi Steve,

 

There is a video here that was done in 2.8 but I think all the functions are 
still available in 3.0. Make sure you are just selecting and editing your grid 
layer and nothing else.

 

https://www.youtube.com/watch?v=_DKxAJ1xsrQ

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Stephen 
Sacks
Sent: Thursday, 24 October 2019 1:46 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] how to rotate a grid

 

I am using QGIS  3.4.12-Madeira . I have successfully superimposed a grid on my 
map, using two different methods: (1) View > Decorations > Grid and (2) Vector 
> ResearchTools > grid . With either method I see the grid just as I want it. 
My problem comes in rotating the grid without rotating other layers. Various 
UTube snippets make it seem easy to adjust the grid's rotation and position to 
line up with other layers, but when I change the Rotation field at the bottom 
of my screen all layers rotate.  I've tried saving the grid as a new layer, 
I've tried selecting the grid layer, I've tried selecting all the lines of the 
grid, but I can't figure out how to rotate just the grid. What am I doing wrong 
?

   Thanks in advance for your advice. 

Steve

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Can't find the the Print Composer window while creating a basic map layout in QGIS 3.4 Madeira

[Phil Wyatt]

Hi Donald,

 

Try Project, Layout Manager and then create a new layout. That’s should get you 
started. Also to change the page size…Right click on the page, Page Properties 
and set up a custom page with the dimensions required

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Donald 
Meier
Sent: Wednesday, 13 November 2019 2:25 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Can't find the the Print Composer window while creating a 
basic map layout in QGIS 3.4 Madeira

 

I am trying to lay out a map to export and print at a larger size, 
approximately 24 x 36 inches or A1. The help tutorial for the version says to 
followthhis path:  Projects -> Layouts ->  Composer Manager -> Print Composer. 
In my version there is no Composer Manager or Print Composer in any menu I can 
find. Can anyone help with this?

 

Thanks in advance!

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Displaying the labels of points.kmz in Google earth

[Phil Wyatt]

Hi Jean,

 

When you export you need to set the NameField under Datasource Options 
(probably need to scroll down to see these options)

 



 

In this example I want the labels to show my field name “PointType” and the 
description to be the “PointNotes” field from my layer

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of jean 
Lukusa
Sent: Sunday, 24 November 2019 5:36 AM
To: Qgis Users List
Subject: [Qgis-user] Displaying the labels of points.kmz in Google earth

 

Hi all,

I have converted a points shapefile into kmz.  

After that I displayed points.kmz on Google earth. 

So I would like to know how can I display the labels of points on Google earth?

 

Exploration and Mining Geologist
+243(812156128/973741744)

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] multiple polygon features within a layer

[Phil Wyatt]

Hi Dave,

What you are looking to do is classify the data via an attribute field in your 
table.

Check out the documentation here 

https://docs.qgis.org/3.4/en/docs/training_manual/vector_classification/classification.html#basic-fa-classifying-nominal-data


Cheers - Phil, 
On the road with his iPad 

> On 18 Dec 2019, at 7:17 pm, Dave Gardiner <2dave.gardi...@gmail.com> wrote:
> 
> I'm sure this is very basic stuff but how do I create multiple polygon
> features within a layer, each with its unique color?
> 
> regards
> Dave
> 
> 
> 
> 
> 
> --
> Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] GEO PDF and Avenza maps or similar

[Phil Wyatt]

Hi Tony,

 

I would also suggest following the Input/Mergin projects that allow you to
place a QGIS project onto your device, complete with all your layers, forms,
styling, themes etc! Available for Android and IOS

 

https://inputapp.io/

https://www.lutraconsulting.co.uk/blog/2019/04/28/mergin-qgis-plugin/

 

 

There is also QFIELD for Android that does the same

 

https://qfield.org/

 

Both of these approaches mean its very quick to use your field collected
data when back in the office without having to transform data. Both are
under active development.

 

Cheers - Phil

 

(Tastrax in the OSM and online world)

 

 

From: Qgis-user  On Behalf Of Tony
Shepherd (FarmMaps NZ)
Sent: Wednesday, 11 March 2020 4:50 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] GEO PDF and Avenza maps or similar

 

Hi All

 

Hope everyone is well.

 

I have been experimenting with exporting maps as geo-pdf's and then opening
them on a mobile device (phone, tablet etc) using Avenza Maps.  It is
working well and as a bonus it's free.  Being able to add tracks and
waypoints on top of the PDF in real-time while being location aware is great
and exporting those added features for use in QGIS is reasonably straight
forward.

 

My question, apologies for the lengthy intro, is what product others are
using in the field to view geo-pdf's and have the ability to add
tracks/waypoints/features and then export to QGIS for future use?

 

Cheers

Tony

 

Tony Shepherd  |  GeoSpatial / Mapping Manager

Ph 027 435 6193  |  E t...@farmmaps.nz  

FarmMaps NZ, 3 Kerwood Place, Gore 9740

 



 

 

 
 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] How to Cite Esri Imagery/Satellite

[Phil Wyatt]

You should use the copyright text attached to the data

 

https://server.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer/

 

From: Qgis-user  On Behalf Of krishna Ayyala
Sent: Friday, 20 March 2020 8:40 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] How to Cite Esri Imagery/Satellite

 

In QGIS, I am going to make a pdf map with  "Esri Imagery/Satellite" as the 
background map. What is the correct way to cite it in the map?

Regards.

 


Esri Imagery/Satellite

https://server.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer/tile/{z}/{y}/{x}

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] How to resize or fit QGIS windows

[Phil Wyatt]

Hi Yann,

 

On Windows - If they double left click on the white bar at the top of the QGIS 
window it should ‘fill the screen’ and they can see the bottom status bar.

 

Double click again and it will be a separate window that they can resize from 
the corners, top, left or right hand borders (like any other application on 
their computer)

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Yann Troutet
Sent: Saturday, 28 March 2020 4:32 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] How to resize or fit QGIS windows

 

Below is a message from an online student.

 

"I can't view the bottom of the screen so cant change resolution, this has been 
an ongoing problem not being able to see things on the screen even in the 
toolbox plugins having same problem. Tried all sorts of things, but QGIS wont 
let me move the window up or change the size."

 

Any solutions?

 

Yann


-- 
This message has been scanned for viruses and 
dangerous content by   MailScanner, and is 
believed to be clean. 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Plugin Processing crashes QGIS and computer

[Phil Wyatt]

Hi Sabine,

I would also try making sure that your windows installation is up to date,
memory is all OK and also check drivers for your monitors. I had a similar
error (WHEA) that bugged me for ages and it was fixed with new monitor
drivers from the manufacturer (not the windows defaults!)

Cheers - Phil

 

From: Qgis-user  On Behalf Of Sabine
Vanhuysse
Sent: Tuesday, 31 March 2020 8:40 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Plugin Processing crashes QGIS and computer

 

Hi all,

 

I have recently installed QGIS 3.10.4 LTR, as some of the new features would
be very useful to my work. Unfortunately, the Processing plugin which I use
quite a lot causes QGIS and my computer to crash nearly systematically.
After each fresh install - I uninstalled/installed QGIS a few times - and
the first crash, I get this message when I open QGIS again : < Plugin
processing : The plugin will be disabled because it crashed QGIS during last
startup. Please report an issue and re-enable the plugin when the problem
has been solved." When I try to activate the plugin by ticking the box in
the 'Manage and Install Plugins' menu, my computer crashes again.

 

I have tried to install other standalone versions of QGIS, ie, 3.12.0-2 and
3.8.3-1, and the version that comes with the osgeo4w installer, and they all
cause the same problem. Only when I revert to my old 3.4.7 version does the
plugin function without any problem.

 

I have also tried to use a new user profile, and even to delete the QGIS
folder in the user/appdata/roaming folder, but this didn't work.

 

I should add that the crashes are not totally systematic, as after one fresh
install, there was no crash when I opened QGIS without Grass functions for
the first time. However, the second time (QGIS with Grass functions), it
crashed again. The next times, it crashed be it with or without Grass
functions.

 

I am using Windows 10 Family edition and I have 2 monitors. When my computer
crashes, I get a blue screen with an error message that is not always the
same, but often it is a WHEA message. I have tried to unplug one of my
monitors before restarting the computer, but this did not solve the issue.

 

Of course, I can go on using QGIS 3.4.7, but it would be very helpful to
work with a more recent version, so I would very much appreciate your help
with this issue.

 

Thanks!

Best wishes,

Sabine

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS windows problem

[Phil Wyatt]

Hi David,

 

Sounds like you are in Full Screen Mode – does pressing F11 do anything for
you?

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of David
McAlpin
Sent: Saturday, 4 April 2020 10:48 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] QGIS windows problem

 

I have an odd problem with the 64-bit version of QGIS, version3.10.4-A
Coruña.



Once I load QGIS, its window occupies the entire screen, but it's more than
merely maximized.  There is no task bar at the bottom, and there are no
Maximize/Minimize/Close buttons.  I cannot grab the edges of the QGIS window
to shrink it, nor can I move it out of the way, because there's no title
bar.  I can only access the desktop with the ALT-ESC key-combination.  This
moves the QGIS window to the back of all other programs that are running,
but the QGIS window still cannot be maximized, minimized, or closed.  The
only way to exit is with the [Project-Exit QGIS] menu command.  

All other programs run normally, even those running simultaneously with
QGIS.  This is annoying as hell, and I feel certain this is a simple setting
that needs to be changed, but so far it has evaded all my efforts to find
it.



 

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Layer disappearing at different zoom levels.

[Phil Wyatt]

Hi Folks,

 

Those layers appear to have some zoom layering on them already

 

https://hazards.fema.gov/gis/nfhl/rest/services/public/NFHL/MapServer/3

 

Min Scale: 25

Max Scale: 0

 

Having said that, they both seem to disappear at around 1:115,000

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of krishna Ayyala
Sent: Monday, 6 April 2020 1:08 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Layer disappearing at different zoom levels.

 

Hello,

Using the "ArcGisMapServer" in the browser window, I have connected to the 
following link.

 

https://hazards.fema.gov/gis/nfhl/rest/services/public/NFHL/MapServer  

 

I have added  the "Alluvial Fans" and "FIRM Panels" in to layers window. Map 
and both the layers are set to the projection EPSG:4269. Righ clicked on  
"Alluvial Fans" and zoom to layer. I am able to see both the layers on the map 
window. Right clicked on  "FIRM Panels" and zoom to layer. Unable to see 
anything in the map window. Can anyone please help me fix this problem?

 

Regards.

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] How to resize or fit QGIS windows

[Phil Wyatt]

Are you on Windows? What does the windows Key and the up arrow do for you?

 

From: Qgis-user  On Behalf Of Patrick Dunford
Sent: Tuesday, 7 April 2020 5:21 PM
To: qgis-user ML 
Subject: Re: [Qgis-user] How to resize or fit QGIS windows

 

At the moment on my computer which has a resolution of 1360x768, the right edge 
of the window is several pixels off the right hand side of the screen.

During certain operations, the main window will automatically resize itself to 
1366x768.

On 7/04/20 7:16 pm, Phil Wyatt wrote:

Not sure that is correct – I just made my screen as small as possible with a 
project running and its 1057x443.. I would hate to do any work at that 
resolution but I can see all the menus and the status bar.

 

They are not stuck in full screen mode are they? F11 to exit?

 

From: Qgis-user  <mailto:qgis-user-boun...@lists.osgeo.org> 
 On Behalf Of Patrick Dunford
Sent: Tuesday, 7 April 2020 3:02 PM
To:  <mailto:qgis-user@lists.osgeo.org> qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] How to resize or fit QGIS windows

 

There appears to be a minimum screen resolution requirement of 1366x768 for the 
main application window. 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Display recent projects at startup

[Phil Wyatt]

Hi Patrick - which version of QGIS? I think it’s the 

Settings, General, Options, Project files and "Open Project on launch" set as 
"Welcome Page'

Cheers - Phil

-Original Message-
From: Qgis-user  On Behalf Of Patrick Dunford
Sent: Wednesday, 15 April 2020 10:58 AM
To: qgis-user ML 
Subject: [Qgis-user] Display recent projects at startup

Good day

On one of my computers Qgis will display a graphical list of recently opened 
projects when no project is currently open. On another computer it won't 
display this list.

How is it possible to get the software to display this list. I have looked 
through menus and settings but haven't been able to discover how to change this.

Thanks

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Plugin Unavailable in my desktop

[Phil Wyatt]

Hi Shrawan

 

Can you access the plugin repository via a browser? 
https://plugins.qgis.org/plugins/plugins.xml

 

This is the plugin repository location that should be set in Plugins, Manage 
and Install, Settings

 

If you are behind a proxy it may be blocking access. You may need to set up a 
proxy under Settings, Network, Use Proxy for web access.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of shrawan 
tripathi
Sent: Wednesday, 15 April 2020 5:04 PM
To: qgis-user 
Subject: [Qgis-user] QGIS Plugin Unavailable in my desktop

 

Hi All, Is anyone help me as 

QGIS Official Plugin Repository is unavailable in mt QGIS Desktop so I would 
not be able to install the plugin.

I reload id but not get it.

 

-- 

Warm regards

Shrawan Kumar Tripathi 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Shared line-style resources etc

[Phil Wyatt]

Hi Tony,

 

A lot of styling depends on the attributes of the layer so you can really
only pass around QML files for common layers. I have some to match the
Tasmanian LIST system common use layers (roads, hydrology etc)

 

https://listdata.thelist.tas.gov.au/opendata/

 

Are you specifically after some to match common NZ data downloads? I did
some styles a while ago for a project on the Auckland Islands using the 150K
topo data. You are welcome to those if they help at all

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Tony
Shepherd (FarmMaps NZ)
Sent: Monday, 20 April 2020 11:07 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Shared line-style resources etc

 

Hi All

 

Hope that averyone is getting through whatever lockdown conditions you are
under ok.  Day 26 for us in New Zealand. 

 

I'm just wondering of any known shared resources for line styles, point
styles, svg libraries etc?  I have done some searching on the web and found
a few things scattered here and there but nothing really substantial.  I
imagined with QGIS being opensource and loads of plugins being shared that
there may be a similar resource for styles etc.

 

Cheers

Tony

 

Tony Shepherd  |  GeoSpatial / Mapping Manager

Ph 027 435 6193  |  E t...@farmmaps.nz  

FarmMaps NZ, 3 Kerwood Place, Gore 9740

 



 

 

 
 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Error for new download 3.12.3

[Phil Wyatt]

It may just be a numbering issue (unless there was a quick hotfix)

https://ftp.osuosl.org/pub/osgeo/download/qgis/windows/

3.12.3-1 is there but the link points to 3.12.3-2

-Original Message-
From: Qgis-user  On Behalf Of Grant Boxer
Sent: Thursday, 21 May 2020 10:09 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Error for new download 3.12.3

The link for version 3.12.3 download is not working. Tried it last night and 
this morning.

Regards Grant Boxer

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] exporting files

[Phil Wyatt]

To share the complete project with all layers and styles its best to ‘package’ 
up the whole project. Check out the qPackage plugin.

 

From: Qgis-user  On Behalf Of Boaz Bar Ilan
Sent: Thursday, 18 June 2020 8:53 PM
To: qgis-user 
Subject: [Qgis-user] exporting files

 

 whenever im trying to save thar layer in shp or geopack i loose the layer 
definitions ( like labels for example)

 what is the best way to share a qgis work to my friend ?

thanks

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Selecting maximum values in drill holes

[Phil Wyatt]

How about the following as a virtual layer

Select max(depth to) from YOURLAYER - deepest 'depth to' for all drill holes

Or 

Select drill hole id, max(depth to ) from YOURLAYER group by drill hole id - 
deepest depth per hole id?


-Original Message-
From: Qgis-user  On Behalf Of Grant Boxer
Sent: Friday, 26 June 2020 12:20 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Selecting maximum values in drill holes

I am trying to find out the best way to select the highest values in a set of 
drill holes as well as the bottom of hole values. The files contain drill hole 
id, depth from, depth to and assay values. If have tried the maximum function 
but I don't think I have the syntax correct. 
Anyone have any suggestions?

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Selecting maximum values in drill holes

[Phil Wyatt]

What have you tried so far?

-Original Message-
From: Qgis-user  On Behalf Of Grant Boxer
Sent: Friday, 26 June 2020 12:20 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Selecting maximum values in drill holes

I am trying to find out the best way to select the highest values in a set of 
drill holes as well as the bottom of hole values. The files contain drill hole 
id, depth from, depth to and assay values. If have tried the maximum function 
but I don't think I have the syntax correct. 
Anyone have any suggestions?

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] PDF Georefernces

[Phil Wyatt]

Hi Warren,

 

Yes, Its possible to use the images from the PDF's and georeference them
using the Raster, Georeferencer setup in QGIS.

 

Here is a quick video on one way to use the georeferencer (plus some other
useful tips)

 

https://www.youtube.com/watch?v=67j_HShwv8Y

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Warren
Thorne
Sent: Monday, 13 July 2020 2:36 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] PDF Georefernces

 

Hi all,

 

Thanks for the welcome to the group. I have some PDF's from historic reports
I want to georeference and import  into QGIS, is this possible?

 

 


Warren Thorne
Principal Geologist 



  


1 Sleat Rd, Applecross, Western Australia 6153 


P +61 8 9329 3600 F +61 8 9329 3601 M 


E   warren.tho...@mrl.com.au W
 www.mineralresources.com.au 

 

--
IMPORTANT PLEASE READ - Email Disclaimer
--
This email message (including any attachments) is intended only for the
addressee(s) and is to be kept strictly confidential unless otherwise agreed
in writing with its sender. If you are not the intended recipient please
notify the sender by reply email and immediately delete this email. Use,
disclosure or reproduction of this email (or any of its attachments) by
anyone other than the intended recipient(s) is strictly prohibited. No
representation is made that this email or any attachments are free of
viruses. Virus scanning is recommended and is the responsibility of the
recipient.
-- 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drone in agriculture

[Phil Wyatt]

Hi Przemek

I am not a drone user but I have seen some of the flight planning software and 
it will give you the AGL heights required for various image resolutions. There 
are also online services for stitching up the hundreds of images from flights. 
Check out something like the app Map Pilot from Maps Made Easy. That will give 
you a great start.

Any of the images created Maps Made Easy can be used directly in QGIS.


Cheers - Phil, 
On the road with his iPad 

> On 14 Dec. 2016, at 6:44 am, pzab  wrote:
> 
> Hello,
> 
> I am the beginner user of Yuneec Typhoon q500 4K.
> https://www.yuneec.com/en_US/products/typhoon/q500-4k/overview.html
> 
> I am before national exam in Poland.
> 
> I will use the drone for taking photos in agriculture especially for
> estimating damages done by hunting animals or overwintering of the crops and
> of course damages done by hail, heavy rain, hurricane and spring frost.
> 
> This documentation will be given to insurance company as a proof of damages
> in case of paying compensation.
> 
> My question is - on what height AGL should I fly my drone to take good
> photos which I can later add to qgis as a raster and georeference and
> digitize it?
> 
> I only know that photos should be taken in nadir position (camera straight
> down).
> 
> The drone has CGO3 camera equipped with 12mpixels.
> 
> I appreciate any help 
> 
> Thank You very much in advance,
> 
> Przemek
> 
> 
> 
> 
> 
> --
> View this message in context: 
> http://osgeo-org.1560.x6.nabble.com/Drone-in-agriculture-tp5299730.html
> Sent from the Quantum GIS - User mailing list archive at Nabble.com.
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 3.0 split multipart

[Phil Wyatt]

Try the plugins but make sure you also look at experimental plugins (under 
plugin settings)

Cheers - Phil, 
On the road with his iPad 

> On 5 Apr 2018, at 8:47 pm, Mensio Federico  wrote:
> 
> Where is split to multipart function in QGIS 3?
> 
> -- 
> Federico MENSIO
> IPLA spa
> Corso Casale, 476 - 10132 Torino
> Mobile +39.340.06.01.363
> TEL +39.011.432.0443 FAX +39.011.89.89.333
> men...@ipla.org - www.ipla.org
> 
> -
> Questa e-mail è personale e i suoi contenuti contengono informazioni 
> riservate ai destinatari. Pertanto la lettura, copia od altro uso da parte di 
> altri o qualsiasi altra azione derivante dalla conoscenza di queste 
> informazioni sono rigorosamente vietate e perseguibili ai sensi del Dlgs 
> 196/03.
> Qualora abbiate ricevuto questo documento per errore siete cortesemente 
> pregati di darne immediata comunicazione al mittente ai riferimenti indicati 
> e provvedere immediatamente alla sua distruzione.
> 
> Salvaguardiamo l'ambiente: se non ti è necessario, non stampare questa mail
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Plugins repository unavailable for 2.18?

[Phil Wyatt]

I did  fresh installs of 2.18 and 3.0 on a new computer today and both have the 
repository listed as https://plugins.qgis.org/plugins/plugins.xml  - both work 
fine for me and show the correct plugins for each version. Maybe it’s just the 
extra ?qgis=2.18 is the bit that has been changed?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
Fielding, Eric J (329A)
Sent: Saturday, 26 May 2018 2:42 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Plugins repository unavailable for 2.18?

 

Hello,

 

Has something changed about the plugins repository for version 2.18? I have not 
yet upgraded to version 3.x, and sometime in the last month or so the plugins 
repository (https://plugins.qgis.org/plugins/plugins.xml/?qgis=2.18) has 
stopped working for me.

 

Thanks,

++Eric Fielding

 

-- 

Eric Fielding

Jet Propulsion Lab 

4800 Oak Grove Drive   

Pasadena, CA   91109

USA

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] layers shift when exporting from composer to jpg

[Phil Wyatt]

Hi Mike,

Are you using the Open Layers plugin? If so, swap over to Quick Map Services 
Plug-in and also load the contributors pack which includes google layers


Cheers - Phil, 
On the road with his iPad 

> On 29 May 2018, at 12:57 am, MIKE MCGRADY  wrote:
> 
> I wanted to make a quick map using composer using a google hybrid map as 
> background.  Everything looked fine in the preview, but when I looked at the 
> jpg, the data were no longer in the right space, having shifted some few km 
> to the west.  I am using QGIS 2.8.3 Wien.  Am I missing something?  Any work 
> around?
> 
>  
> 
> I am not very experienced with QGIS, so simple instructions work best (in all 
> things)  
> 
> 
> 
> M. J. McGrady
> Am Rosenhugel 59
> A-3500 Krems
> Austria
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Unable to load project

[Phil Wyatt]

Can you open a copy of the previous project file in something like notepad
and see if anything obvious can be fixed and or removed in relation to the
DXF layer?

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
Springfield Harrison
Sent: Thursday, 7 June 2018 1:36 PM
To: qgis-user@lists.osgeo.org List
Subject: [Qgis-user] Unable to load project

 

Hello All,

Bad News.  I am unable to load a project that normally works with no
problems:

1.  QGIS 2.10.1, Windows 7.
2.  Project starts to load, loads many layers . . .
3.  halts loading "point Entity", a DXF file
4.  the DXF file was renamed to trigger the Handle Bad Layers service
5.  this was bypassed but project loading still fails to complete,
cursor spinner on constantly
6.  exiting with Save triggers "Unknown Exception"
7.  the project file is trashed to 0kb
8.  Exiting without Save is OK but no project can be loaded
9.  Restoring previous project file versions yields the same results
10. Loading some other projects works but may have cursor spinner

Any ideas what is going on here?  I have rebooted the computer.

Thanks very much . . . .

 

Cheers . . . . . Springfield Harrison

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Unable to load project

[Phil Wyatt]

When you say “loads many layers”…how many are we talking about – 20, 50, 250? 
Shape files, WMS, Raster, Vector? Unknown Exception I suspect is hard to 
diagnose, especially now on QGIS 2.10 and Windows 7 which are both pretty old.

 

 

From: Springfield Harrison [mailto:stellar...@gmail.com] 
Sent: Thursday, 7 June 2018 4:28 PM
To: Phil (The Geek) Wyatt
Cc: qgis-user
Subject: RE: [Qgis-user] Unable to load project

 

hello Phil,

I did open the project file in Word, 2033 pages, and found 13 instances 
referring to the dxf file. Hard to say if anything was wrong there, nothing 
obvious. At least to me. Some other research I did indicates that maybe there 
is an authentication problem, not sure just what that boils down to.

I don't think the dxf file is the problem. I renamed it and bypassed it on the 
startup routine which the program accepted but it still seized up with a 
spinning cursor. Some things still function, such as modifying the properties 
of a layer , Etc. But the screen is blank and nothing can be saved.

For some time I have noticed that loading a project file bogs down for a while 
and then would resume to completion. Now it bogs down and blows up. The key 
message seems to be unknown exception.

Some older project files do load successfully however...

Cheers . . . . .   Spring
Samsung Tab 4

On Jun 6, 2018 11:15 PM, "Phil Wyatt"  wrote:

Can you open a copy of the previous project file in something like notepad and 
see if anything obvious can be fixed and or removed in relation to the DXF 
layer?

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
Springfield Harrison
Sent: Thursday, 7 June 2018 1:36 PM
To: qgis-user@lists.osgeo.org List
Subject: [Qgis-user] Unable to load project

 

Hello All,

Bad News.  I am unable to load a project that normally works with no problems:

1.  QGIS 2.10.1, Windows 7.
2.  Project starts to load, loads many layers . . .
3.  halts loading "point Entity", a DXF file
4.  the DXF file was renamed to trigger the Handle Bad Layers service
5.  this was bypassed but project loading still fails to complete, cursor 
spinner on constantly
6.  exiting with Save triggers "Unknown Exception"
7.  the project file is trashed to 0kb
8.  Exiting without Save is OK but no project can be loaded
9.  Restoring previous project file versions yields the same results
10. Loading some other projects works but may have cursor spinner

Any ideas what is going on here?  I have rebooted the computer.

Thanks very much . . . .

 

Cheers . . . . . Springfield Harrison

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Phil Wyatt]

Seems to be working OK for me on Win10 Pro. 2.18.20

 

Where exactly are you using the colour picker when it freezes? (layer,
style, single style, categorised, rule based.??). What sort of data layer?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
Elstermann, Mike
Sent: Tuesday, 12 June 2018 11:37 PM
To: 'qgis-user@lists.osgeo.org' (qgis-user@lists.osgeo.org)
Subject: [Qgis-user] "Pick color" freeze win10?

 

QGIS 2.14 / 2.18(.20) under Windows 10:
Windows freezes when the "Pick color" function is used. Only way out
 and "Abort". Ideas?

 

THX, mikeE.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Phil Wyatt]

If you click on the fill colour (rather than use the drop down box) is the
colour picker tab there and does that work?

 



 

From: Elstermann, Mike [mailto:mike.elsterm...@itc-halle.de] 
Sent: Wednesday, 13 June 2018 8:06 PM
To: 'Phil Wyatt'; qgis-user@lists.osgeo.org
Subject: AW: [Qgis-user] "Pick color" freeze win10?

 

See this little video, after the last click ("Pick Color") QGIS/Win10
freezes. No pipette :-(

 

http://www.geoobserver.de/QGIS_Freeze.mp4

 

THX, mikeE.

 

Von: Phil Wyatt  
Gesendet: Mittwoch, 13. Juni 2018 08:09
An: Elstermann, Mike ;
qgis-user@lists.osgeo.org
Betreff: RE: [Qgis-user] "Pick color" freeze win10?

 

Seems to be working OK for me on Win10 Pro. 2.18.20

 

Where exactly are you using the colour picker when it freezes? (layer,
style, single style, categorised, rule based.??). What sort of data layer?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
Elstermann, Mike
Sent: Tuesday, 12 June 2018 11:37 PM
To: 'qgis-user@lists.osgeo.org' (qgis-user@lists.osgeo.org)
Subject: [Qgis-user] "Pick color" freeze win10?

 

QGIS 2.14 / 2.18(.20) under Windows 10:
Windows freezes when the "Pick color" function is used. Only way out
 and "Abort". Ideas?

 

THX, mikeE.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Phil Wyatt]

Hi MikeE,

If you have only recently installed 2.18.20 I would also consider a reinstall 
in case there was some issue with the original download.

If I remember correctly there may have also been issues on Mac computers some 
time ago.

Cheers - Phil

-Original Message-
From: Elstermann, Mike [mailto:mike.elsterm...@itc-halle.de] 
Sent: Thursday, 14 June 2018 3:55 AM
To: Phil Wyatt
Cc: qgis-user@lists. osgeo. org
Subject: Re: [Qgis-user] "Pick color" freeze win10?

OK, it works :-)
THX, mikeE.

> Am 13.06.2018 um 12:24 schrieb Phil Wyatt :
> 
> If you click on the fill colour (rather than use the drop down box) is the 
> colour picker tab there and does that work?
>  
> 
>  

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Irregular map frame with transparent mask?

[Phil Wyatt]

Does this video show what you want to achieve?

 

https://www.youtube.com/watch?v=6h5kT2--xBM

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
Alexandre Neto
Sent: Wednesday, 20 June 2018 4:20 AM
To: QGIS User
Subject: [Qgis-user] Irregular map frame with transparent mask?

 

Hi,

 

I am looking for a way to create a map with an irregular (non-rectangle) frame.

 

There is blog post from Anita showing how to do it but it needs a white mask 
all around the map. While I need it to be transparent. 

 

I don't think this is possible yet without going the SVGs way, but maybe 
someone have so cool trick to share.

 

Thanks

-- 

Alexandre Neto

-

@AlexNetoGeo

http://sigsemgrilhetas.wordpress.com

http://gisunchained.wordpress.com

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QGIS on AWS

[Phil Wyatt]

Hi Folks,

 

Does anyone have any insights or documentation on running QGIS on AWS? I am
working with an organisation that wishes to setup QGIS and possibly QGIS
server on AWS. Looking for any documentation that may help them or steer
them clear if it's a bad proposal.

 

Cheers - Phil

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QuickMapService plugin for 3.2

[Phil Wyatt]

It has been reported to the developers

 

https://github.com/nextgis/quickmapservices/issues/166

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Micha 
Silver
Sent: Monday, 25 June 2018 12:47 AM
To: Qgis-user@lists.osgeo.org
Subject: [Qgis-user] QuickMapService plugin for 3.2

 

I see that the recent update to version 3.2 causes a conflict with the very 
popular (and important) "QuickMapServices" plugin. Is there any plan to update 
the plugin for the new version?

Thanks,




-- 
Micha Silver
Ben Gurion Univ.
Sde Boker, Remote Sensing Lab
cell: +972-523-665918
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Geocode an Excel (.xlsx) spreadsheet?

[Phil Wyatt]

Grab the MMQGIS plugin that has a geocoder. For that many addresses you may 
need a google api key. All pretty easy in the plugin.


Cheers - Phil, 
On the road with his iPad 

> On 19 Jul 2018, at 5:56 am, Mike Watkins  wrote:
> 
> Hi there,
> I have a spreadsheet of voter addresses (50,000 records) which I would like 
> to turn into a Shapefile. 
> There are, however, no coordinates in the file.
> I am a very novice user so do not yet know my way around QGIS.
> Does it have a geocoder that would help me do that? 
>  
> Thanks for any help or suggestions
>  
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Georeferenced raster images

[Phil Wyatt]

Hi Wolstan,

If you are using QGIS3, head to the plugins and make sure the georeferencer 
plugin is ticked. It then becomes available in the raster menu. I suspect that 
is what you are looking for.

Cheers - Phil

-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Wolstan 
H M Dixie
Sent: Saturday, 21 July 2018 8:50 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Georeferenced raster images

Hi - I am a new user struggling to pick up the fundamentals - I have 
successfully imported a LIDAR raster layer and hillshaded / pseudo 
coloured / contoured it.

My problem is that I want an image of a topographical map  behind it as 
a base map to provide context.

The GIS I am familiar with had the facility to take an image eg TIFF, 
JPG, PNG, georeference the four corners, and import it into a layer so 
that it was matched to the vector map. This seems a simple and I should 
have thought common requirement eg you want to put a TIFF of a historic 
map behind the modern map you are creating.

I cannot see any way of doing it - am I being obtuse?

Any help appreciated

Wolstan

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] google earth aerial is offset

[Phil Wyatt]

Hi Boaz,

 

Are you using Google earth via “Open Layers plugin”? If so, check and see if 
the offset still exists with QuickMapServices Plugin (with the contributors 
pack). Is this in the map view or when you do a print via composer.

 

Some imagery is not well aligned but it varies across the globe. How are you 
determining that there is an error – from known GPS traces or someone else’s 
data? Others may know of some way to ‘shift’ the imagery (if you feel that is 
necessary).

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Boaz 
Bar Ilan
Sent: Sunday, 22 July 2018 2:50 PM
To: qgis-user
Subject: [Qgis-user] google earth aerial is offset

 

hi

I use google earth satellite layer

 

it constantly comes with little offset

 

what can be done ?

 

thanks

 

boaz

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] google earth aerial is offset

[Phil Wyatt]

Ho Boaz,

 

In QuickMapServices menu scroll down to Settings, then onto More Services tab, 
the click on Get Contributed Pack. That will load lots more tiled map services. 
You can also then compare between say ESRI and Google

 

Cheers - Phil

 

From: Boaz Bar Ilan [mailto:boazpro...@gmail.com] 
Sent: Sunday, 22 July 2018 4:31 PM
To: Phil Wyatt
Cc: qgis-user
Subject: Re: [Qgis-user] google earth aerial is offset

 

hi phil

thanks for your help

yes, I take the aerial from open layers plugin and than google maps

with the quickmapservices plugin I don't see aerial option ( how to add it with 
the contribution pack? )

 

to the second remark - I compare the aerial with reliable  shp  and/or dxf  
layers and there is difference

 

thanks

 

boaz

 

2018-07-22 9:10 GMT+03:00 Phil Wyatt :

Hi Boaz,

 

Are you using Google earth via “Open Layers plugin”? If so, check and see if 
the offset still exists with QuickMapServices Plugin (with the contributors 
pack). Is this in the map view or when you do a print via composer.

 

Some imagery is not well aligned but it varies across the globe. How are you 
determining that there is an error – from known GPS traces or someone else’s 
data? Others may know of some way to ‘shift’ the imagery (if you feel that is 
necessary).

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Boaz 
Bar Ilan
Sent: Sunday, 22 July 2018 2:50 PM
To: qgis-user
Subject: [Qgis-user] google earth aerial is offset

 

hi

I use google earth satellite layer

 

it constantly comes with little offset

 

what can be done ?

 

thanks

 

boaz

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Repeated maps with different datasets

[Phil Wyatt]

Hi ameces

Question - Are all the CSV the same data but just in a different municipaility?

One approach may be to merge all the csv into one, then do steps two and three, 
then create an 'atlas' output for each municipaility.

No special plugins required at all to do that

Cheers - Phil

-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of ameces
Sent: Friday, 31 August 2018 9:43 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Repeated maps with different datasets

Hello,

I was wondering whether I could use some tool/plugin/additional software to
produce a big series of maps that are very similar to each other, except
that each one uses a different data set. 

So in other words. I have a lot of different CSV-files that I input into
QGIS 2.18, and this is the process of me making a single map: 
1) apply CSV-layer to QGIS, apply vector layer of the map of Finland and its
administrative borders (municipalities)
2) merge the CSV-data with the map vector layer, using municipality name as
the common value
3) create the classifications and visualize the data within the map
4) go into map layout mode and create a finished map with headlines, north
arrow, scale, legend etc.
5) and then do the same with a hundred different datasets

Is there a way to do this without going over every single step manually for
each map? I'm open to any solution, whether it was using QGIS, a different
version of QGIS, or even ArcGIS. 

I have saved templates in the QGIS to save the map layout, but it doesn't
save a lot of time and it caused numerous crashes when I used it. For some
reason QGIS does not like when I save a map layout and then use it with
another map. 



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Repeated maps with different datasets

[Phil Wyatt]

Blimey!

That’s a lot of maps - 100 CSV X 3 values X 300+ municipalities = over 90,000 
maps!

Can you point us to any of the data files?

Its beyond my skillset but I would be looking to use Processing and scripts to 
at least select a csv and then do all the joins and categorisation and place 
the data in layout and produce a map output. That’s if I couldn’t combine the 
CSV's in the first place to have a single record for each Municipality with the 
300 values as columns.

Cheers - Phil


-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of ameces
Sent: Friday, 31 August 2018 2:55 PM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] Repeated maps with different datasets

Hi Phil!

I have a hundred different CSV files that have different numeric values for
the same municipalities. So for example I have one CSV that has values
1,2,3,4 on municipalities a, b, c and d. 

Then another CSV that has 5,6,7,8 on the same municipalities a,b,c and d. 

To be exact: all of my CSV's have only four columns. First is the name of
the municipality, then three columns of values that I want to make a map of
each one of them. So three maps from one CSV. 

I hope I made some sense. :) 



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] 1000 comma separator

[Phil Wyatt]

Hi Finbar,

You can certainly change the values in the legend column


Cheers - Phil, 
On the road with his iPad 

> On 31 Aug 2018, at 7:27 pm, GILLEN Finbar  wrote:
> 
> Hi,
>  
> In the symbology is it possible to add a 1000 comma separater in the legend?
>  
> 
>  
> Regards
> Finbar
>  
> Finbar GILLEN
> Underwriting Performance Analyst
> Pricing & Underwriting Department
> AXA Insurance dac
> Wolfe Tone St, Dublin 1
> T: +353 1 471 1377
> E: finbar.gil...@axa.ie
> 
>  
> *
> 
> The contents and any attachments of this electronic mail message are 
> confidential and intended only for the named addressees. Dissemination, 
> forwarding, publication or other use of the message or attachments by any 
> unauthorised person is strictly prohibited.
> 
> Unless stated to the contrary, any opinions expressed in this message are 
> personal and may not be attributed to AXA Insurance dac or any member of the 
> AXA Group of Companies.
> 
> AXA Insurance dac is regulated by the Central Bank of Ireland. For business 
> in Northern Ireland, AXA Insurance dac is authorised by the Central Bank of 
> Ireland and subject to limited regulation by the Financial Conduct Authority. 
> Details about the extent of our regulation by the Financial Conduct Authority 
> are available from us on request. AXA Insurance dac is a private company 
> limited by shares, registered in Ireland number 136155. Registered Office 
> Wolfe Tone House, Wolfe Tone Street, Dublin 1.
> 
> "AXA Supporting Road Safety in Ireland"
> 
> Internet e-mails are not necessarily secure. AXA Group does not accept 
> responsibility for changes made to this message after it was sent. To help 
> promote the use of electronic documents and to be kinder to the environment, 
> please consider whether you really need to print this
> email.
> 
> *
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS.org website down

[Phil Wyatt]

Looks to be working now - 
https://www.qgis.org/en/site/forusers/alldownloads.html#debian-ubuntu

 

From: Qgis-user  On Behalf Of Cory Albrecht
Sent: Monday, 9 November 2020 6:05 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] QGIS.org website down

 

The QGIS.org website is down. I was trying to downgrade to get around issue 
39850  

, but after deleting 3.16 I was out of luck because I cannot download the 
Debian/Ubuntu packages.

 

Does anybody know anything about when service will be restored?

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS training certification

[Phil Wyatt]

It would be great if that page also linked to certified trainers - its really 
hard to find that in one location. Its easy for someone to say they are 
certified but much harder to verify from what I can tell. Does such a page 
exist?

Cheers - Phil



-Original Message-
From: Qgis-user  On Behalf Of Raymond Nijssen
Sent: Monday, 9 November 2020 8:18 PM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] QGIS training certification

Yes! It is here:

https://qgis.org/en/site/getinvolved/certification.html

Raymond


On 09-11-2020 09:52, i...@jcis.net.au wrote:
> I know to some the idea of getting certificates for training is a bit 
> like getting a degree from the Hamburger University of McDonalds but 
> for others it does give a reassurance that knowledge has been taught 
> absorbed and tested. It also helps with the aim of continuous 
> professional development.
> 
> So is there such a system for QGIS? I thought there was but when I 
> tried to find it on the QGIS website I couldn’t find it. Could 
> somebody point me in the right direction?
> 
> Cheers
> 
> *Dr Iain Stuart*
> 
> */JCIS Consultants /*
> 
> P.O. Box 2397
> 
> Burwood North
> 
> NSW, 2134
> 
> (02) 9701 0191
> (0413) 380116 (m)
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Set variables by UI

[Phil Wyatt]

In Settings, Options, Digitizing you can set "Reuse last entered attribute 
values" but I think its ALL fields.

Cheers - Phil

-Original Message-
From: Qgis-user  On Behalf Of Richard 
Duivenvoorde
Sent: Thursday, 26 November 2020 7:50 PM
To: Harrissou ; qgis-user@lists.osgeo.org; L.W. 

Subject: Re: [Qgis-user] Set variables by UI

Hi,

Some days ago while browsing code, I got the feeling that there was also some 
kind of option like "Remember last inserted value of this field, and use it as 
'default' for the next new feature to create...".
But I cannot find it in the gui (and no time to search for it in the code).

Does anybody is aware of such function?
Not sure if it is usefull for the original question though... It would not work 
over different layers...

Regards,

Richard Duivenvoorde

On 11/25/20 9:19 PM, Harrissou wrote:
> Hi,
> Something like setting default values for field: 
> https://docs.qgis.org/3.16/en/docs/user_manual/working_with_vector/vector_properties.html#default-values
>  
> 
>  ?
> 
> Regards,
> Harrissou
> 
> Le 25 novembre 2020 20:49:17 GMT+01:00, "L.W."  a écrit :
> 
> Hello,
> 
> I have a question again, I know the possibility of the project
> variables, which can be queried from all layers.
> I have to insert several points and lines or polygons in different layers.
> All inserted features have in common that they have certain attributes
> that are the same for all.
> It would be nice if I only have to enter these common attributes for the
> first feature and the values ​​are then automatically inserted as
> default values ​​for each new feature.
> One possible way would of course be a link to a shared data table, but I
> don't necessarily want to go this way for reasons.
> I know the option of giving a UI a Python script when it is opened (even
> if I can't Python), but I haven't found anything to execute a script
> after closing, for example.
> Obviously logical, you can of course set the variables beforehand, but
> that would be another step that you have to take beforehand and you
> cannot get to these variables without a whole series of mouse clicks.
> 
> Any ideas?
> 
> Regards
> 
> --
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user 
> 
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user 
> 
> 
> 
> -- 
> Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez excuser ma 
> brièveté.
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Print Legend as Features of a Layer

[Phil Wyatt]

Hi Walt.

 

Sounds like your layer uses a ‘single symbol’ for the layer styling. Try 
changing it to use Categorized and then use an expression like

 

"NAME" || ' - '  || "Area(ha)"  || ' ha'

 

Where 

*   NAME is the name field in your layer
*   Area(ha) is a field in your layer

This will then produce something with a label like

 

CS001 - 1.826 ha

 



 

Then add a legend for the layer in composer and it should show up like the 
following

 



 

 

The alternative is to add the attribute table rather than a legend

 



 

Cheers - Phil

 

 

 

From: Qgis-user  On Behalf Of Walt Ludwick
Sent: Sunday, 29 November 2020 9:17 PM
To: QGIS User 
Subject: [Qgis-user] Print Legend as Features of a Layer

 

I've got a Polygon layer whose features are a series of contiguous LandPlots, 
and i want to print a map of same with a Legend that lists each LandPlot by 
name, along with its calculated area.

 

My problem is: the Layout Composer in QGIS 3.14 seems to presume that one wants 
a list of Layers for the Legend -and, tho i can filter that list down to just 
the single "LandPlots" Layer that i want, i cannot get it to list the features 
within that Layer. 

 

Have read the docs on this feature 

 , which doesn't tell me how to solve this problem, unless i'm missing 
something -perhaps implicit in this "filter by expression" feature, which calls 
for more code-savvy than i've got on the ball right now <:-(

 

Am at an impasse, so any suggestion at this point would be most appreciated!

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Q calculates Area incorrectly

[Phil Wyatt]

Hi there John,

 

Here is a good explanation to this common question. Check these out and the
get back to us if you still have an issue.

 

https://gis.stackexchange.com/questions/347249/using-area-or-area-function-i
n-qgis-when-the-data-polygon-is-stored-in-utm

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of
johnparrot...@gmail.com
Sent: Friday, 8 January 2021 7:25 PM
To: Qgis-user@lists.osgeo.org
Subject: [Qgis-user] Q calculates Area incorrectly

 

A colleague digitised a number of polygons on my laptop 3 years ago.

I just loaded these on my desktop and used Q (3.16.2) to calculate areas,
but they report incorrectly.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] How do I clean up this geometry?

[Phil Wyatt]

I spotted at least one other anomaly

 



 

Bottom left of this object has a long sliver that you might want to remove

 



 

Cheers

 

 

From: Qgis-user  On Behalf Of 
qgis-u...@stripfamily.net
Sent: Saturday, 9 January 2021 7:28 AM
To: qgis-user 
Subject: [Qgis-user] How do I clean up this geometry?

 

This linked 

  file, proclaimed.zip, is the boundary of the Santa Fe National Forest as 
supplied by the USFS.
If you focus on this area




There is some problematic geometry. If I do a dissolve I get this:



If I remove the holes, I'm left with this bit of stray boundary:


I then remove that with edit nodes. But the resulting polygon is still not 
clean  - if I try to use the field calculator to add the area (using $area), I 
get null.
There is bad geometry that I'm not spotting, but how do I find it?


The second linked  

 file, clean.zip, is the result of the steps above.




___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] move 4 concentric circles from a position to another with a specified center

[Phil Wyatt]

Hi Azurra,

 

You might also like to check out a plugin called “Multi Ring Buffer” that can 
add multiple buffers to all features in your point layer.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Azzurra Lentini
Sent: Wednesday, 13 January 2021 6:42 AM
To: qgis-user 
Subject: [Qgis-user] move 4 concentric circles from a position to another with 
a specified center

 

Hi to all, 

I must draw four different  concentric circles (with different sizes and same 
center) in many different positions: about these positions I know the center of 
the circles (shape file of points).

I created a shapefile of polygons for these circles but I would like to find a 
method to copy the 4 concentric circles and paste the same 4 circles  in  
different positions (of which I know the center). 

 

Do you know any method? for example a kind of snap to the point.

 

If I do it manually it is almost impossible to put the circles exactly in those 
centers. 

 

Thanks Azzurra

 

-- 

Lecturer GIS University "Roma Tre"

Consultant Environmental Risk Prevention and Hydrogeology
AZZURRA LENTINI 

++
Italy Mobile Tel.: **(39) 338 24 40 676
++
SKYPE azzurrahydro
++

  azzurralent...@gmail.com

  azzurra.lent...@uniroma3.it   

++
*Par respect pour l'environnement,*

*n'imprimez ce mail qu'en cas d'absolue nécessité*

 





___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Geometries of labels - automatic positioning (no covering)

[Phil Wyatt]

Hi Folks,

 

To turn on the ‘show candidates’ click on the little gear to the right of 
‘Single labels” then tick the ‘Show Candidates (for debugging)’

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Matej Mailing
Sent: Sunday, 14 February 2021 8:50 AM
To: Régis Haubourg 
Cc: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] Geometries of labels - automatic positioning (no 
covering)

 

Hi,

 

How can I try this option of the rendering engine that displays the labeling 
candidate paths so I could play with the number of candidates?

 

Thanks,

Matej


Dne petek, 12. februar 2021 je Régis Haubourg mailto:regis.haubo...@gmail.com> > napisal(-a):

Hi,

no magic anwser here again. But when I face this kind of need, I switch
on the option of the rendering engine that displays the labeling
candidate paths, and play a lot with the number of candidates.

Of course, the more candidates, the more CPU work, but the more chances
to have a 99 % good result. 

Best luck

Régis


On 12/02/2021 14:02, Matej Mailing wrote:
> Hi Silvio.
>
> Basically my issue is that I need to have all the symbols and labels
> visible, but since the number of those is huge, I want to have the
> need to place them automatically as much as possible. If somehow I
> could use the collision engine to recalculate the positions -  I just
> need the labels to be visible, the exact label position (little more
> to the each side as it must be to avoid colliding) is not important, I
> just need them to be visible near the objects basically...
>
> Positioning every label by hand takes an enormous amount of time of
> manual work that seems to be meaningless in the current state of
> automation :)
>
> Thanks,
> Matej
>
> V V pet., 12. feb. 2021 ob 12:49 je oseba silvio.bentzien
> mailto:silvio.bentz...@protonmail.com> > 
> napisala:
>> Hey Matej,
>>
>> please disregard my last message. I got lost in the thread.
>>
>>
>> Would it help your problem if you lock the scale of your project and use the 
>> Magnifier to zoom in and out? That way, you can lock the symbols and labels 
>> to the scale you want to plot your map in and you would have greater 
>> awareness and control over the placement of you labels. (assuming that 
>> changing label positions manually is feasible in your case)
>>
>> greetings,
>> silvio
>>
>>
>> ‐‐‐ Original Message ‐‐‐
>> On Thursday, February 11, 2021 3:08 PM, Matej Mailing >  > wrote:
>>
>>> Thanks, I already have this enabled.
>>>
>>> What I would like is to achieve this result (img1) instead now having
>>> labels covering each other as in img2.
>>>
>>> Thanks,
>>> Matej
>>>
>>> V V tor., 9. feb. 2021 ob 14:02 je oseba Matej Mailing
>>> mail...@tam.si   napisala:
>>>
 Thanks, I already have this enabled.
 What I would like is to achieve this result (img1) instead now having
 labels covering each other as in img2.
 Thanks,
 Matej
 V V tor., 9. feb. 2021 ob 13:34 je oseba Richard Duivenvoorde
 rdmaili...@duif.net   napisala:

> On 2/9/21 1:29 PM, Matej Mailing wrote:
>
>> Hello Regis,
>> I cannot find that option you mention: "the placement option "always
>> displays" on the layers"
>> I seem to have checked all the options - I am using QGIS 3.16.3.
> See screenshot, it is in the last tab, checkbox "Show all labels for this 
> layer (including colliding labels)"
> Regards,
> Richard Duivenvorde
>>> Qgis-user mailing list
>>> Qgis-user@lists.osgeo.org  
>>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
>>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org  
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Does "Organize columns" work for anybody? (QGIS 3.16)

[Phil Wyatt]

Yep - works for me in 3.16.3, (win10) no problems at all

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Jeff
Sonnentag
Sent: Wednesday, 17 February 2021 11:18 AM
To: qgis-user 
Subject: [Qgis-user] Does "Organize columns" work for anybody? (QGIS 3.16)

 

So the next problem leading to immediate crash/lockup comes when I try to
manage multiple columns (I want to hide a bunch of them and right-clicking
and choosing Hide Column for each one takes forever).

 

Does it actually work in QGIS 3.16.3 for anybody?

 

When the icon for "Organize columns" (pencil in front of a table) is clicked
(doesn't matter what shapefile) QGIS stops working and must be shut down
with the Windows 10 Task Manager.

 

https://docs.qgis.org/3.16/en/docs/user_manual/working_with_vector/attribute
_table.html#hiding-and-organizing-columns-and-enabling-actions

 

This list of known bugs in the change log mentions that it doesn't work if
the table is empty, but the table is NOT empty and it still doesn't work.

 

https://qgis.org/en/site/forusers/visualchangelog316/index.html

 


Organize columns not working if the table is empty

#38653  

Upstream (Qt)



 

So is it just me or everybody?

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] satellite basemap of New York city for qgis2web

[Phil Wyatt]

Hi Steve,

 

Looks to be a range of basemaps available. Try this page for the licence 
requirements and ‘how to’ documentation plus the links you require

 

https://maps.nyc.gov/tiles/

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Stephen Sacks
Sent: Sunday, 7 March 2021 1:13 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] satellite basemap of New York city for qgis2web

 

I want an aerial image from New York City's mapping service (DoITT) to serve as 
a basemap for my qgis desktop project.  I intend to use qgis2web to put on the 
web my map of Brooklyn's Promenade gardens.  It seems that I should be able to 
click  Layer > add Layer > add WMS/WMTS   ,  but I'll need the appropriate URL. 
 The DoITT website has lists of maps but not a URL.  
   Thanks for any help you can offer.
 Steve

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Where are the change logs (for the latest point releases)?

[Phil Wyatt]

You can do a compare between 3.18 and 3.18.1 to see the latest commits

 

https://github.com/qgis/QGIS/compare/final-3_18_0...final-3_18_1

 

 

From: Qgis-user  On Behalf Of Jeff
Sonnentag
Sent: Tuesday, 23 March 2021 1:43 PM
To: qgis-user 
Subject: [Qgis-user] Where are the change logs (for the latest point
releases)?

 

Where would a person find the change logs for point releases?

 

At GitHub ( https://github.com/qgis/QGIS/releases ) all it does it point to
a general version change log (for either 3.18 or 3.16) and that log doesn't
specify what has happened between point releases.

 

What was fixed and what KNOW problems still aren't fixed? . . .  Things to
know.

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (???) RE: Where are the change logs (for the latest point releases)?

[Phil Wyatt]

I am not sure there have ever been changelogs for point releases

 

https://qgis.org/en/site/forusers/visualchangelog318/index.html

 

From: Qgis-user  On Behalf Of Jeff
Sonnentag
Sent: Tuesday, 23 March 2021 2:12 PM
To: 'qgis-user' 
Subject: [Qgis-user] (???) RE: Where are the change logs (for the latest
point releases)?

 

Well, I don't know about the rest of the people using QGIS, but sifting
through commits and pull requests to try to figure out what has and hasn't
been fixed isn't what is expected.  Other software lists specific fixes and
known problems in a notice about each release.

 

 

From: Phil Wyatt mailto:p...@wyatt-family.com> > 
Sent: Monday, March 22, 2021 7:57 PM
To: Jeff Sonnentag mailto:jsonnen...@llenviroinc.com> >; 'qgis-user'
mailto:qgis-user@lists.osgeo.org> >
Subject: RE: [Qgis-user] Where are the change logs (for the latest point
releases)?

 

You can do a compare between 3.18 and 3.18.1 to see the latest commits

 

https://github.com/qgis/QGIS/compare/final-3_18_0...final-3_18_1

 

 

From: Qgis-user mailto:qgis-user-boun...@lists.osgeo.org> > On Behalf Of Jeff Sonnentag
Sent: Tuesday, 23 March 2021 1:43 PM
To: qgis-user mailto:qgis-user@lists.osgeo.org>
>
Subject: [Qgis-user] Where are the change logs (for the latest point
releases)?

 

Where would a person find the change logs for point releases?

 

At GitHub ( https://github.com/qgis/QGIS/releases ) all it does it point to
a general version change log (for either 3.18 or 3.16) and that log doesn't
specify what has happened between point releases.

 

What was fixed and what KNOW problems still aren't fixed? . . .  Things to
know.

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Extending geometry of a multiline alongside the geometry of another multiline

[Phil Wyatt]

Hi Rene,

 

If I understand correctly then you want to use both SNAP to snap to a node and 
also maybe TRACE to trace along a series of vertex?

 

https://www.youtube.com/watch?v=HTnGZlojbio 

 

https://www.youtube.com/watch?v=UMotVVaSjjs

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Rene Paillard
Sent: Wednesday, 14 April 2021 4:27 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Extending geometry of a multiline alongside the geometry 
of another multiline

 

Hello all,

 

I'm trying to extend segments of one polyline shapefile from the intersecting 
point wit another multiline feature alongside the vertices of this secon line 
feature. For this I'm using the nod tool, by clicking each vertix point 
individualy. Is there a better and faster solution to this?

 

Here is a YouTube link to me explaining my problem: 
https://www.youtube.com/watch?v=8KLG4BCOcDY

 

Thank you!

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Building Historical Maps

[Phil Wyatt]

Hi James,

By the sounds of the project I suspect you will get very good at snapping, 
tracing, merging and digitising from old maps. There are good tutorials on 
georeferencing old maps and digitising from them. Your other option will be to 
search out other projects that may have already done some of this work for you 
but honestly, pre the 1990's you will likely struggle to find ORIGINAL digital 
files unless you can get contacts within the agency that was responsible for 
the original digitisation, and they have good archives. Depending on what maps 
you find it may be possible to do some raster to vector conversion.

Buckle in for a slow, long haul project!

Cheers - Phil

-Original Message-
From: Qgis-user  On Behalf Of James Cobban
Sent: Friday, 23 July 2021 10:29 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Building Historical Maps

I am running a project to present historical information about Ontario, Canada. 
 To support this I have imported GIS information on administrative boundaries 
from the Ontario Government.  The only problem is this information only 
describes the current administrative organization of the province, not the 
organization it had for most of its history up until the early 1990s when the 
system was "rationalized".  I am looking for suggestions of how to extract as 
much information from the current GIS data as possible.

For example:  From 1850 to the early 1990s most of Ontario was administered as 
counties with lower level townships.  In the 1990s the more urbanized portions 
of the province were reorganized as "Regional Municipalities" which largely 
ignored the old county boundaries either by including only the urban portion of 
a former county, or by incorporating urban portions of multiple counties. So, 
for example, if I wish to reconstruct the boundaries of the former county of 
Welland I have to concatenate the boundaries of the individual townships that 
made up the former county, and then remove all of the internal, and redundant, 
boundaries.  I have manually done that for one county but it was a pain in part 
because the polygons of the individual townships did not begin at a "corner" 
shared with an adjacent township within the county. Just finding exactly where 
the polygon began and which direction it went took time.

The second issue is that boundaries changed multiple times over the period 
between 1763 when Britain assumed control of the area of Ontario, and the 
present.  In particular city boundaries change as areas are transferred from 
the surrounding rural municipalities to the city as a result of urban growth.  
Where do I get the old boundary information aside from tracing them from old 
maps?

--
James Cobban
911-500 Springbank Dr
London, ON, Canada
N6J 4G6
mailto: webmas...@jamescobban.net
+1-226-504-7603

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Length of lines in polygon depending on attribute

[Phil Wyatt]

Hi Roland,

 

I am assuming measure is a field name so what happens if you try measure=’1’?

 

Cheers - Phil

 

 

 

From: Qgis-user  On Behalf Of Roland 
Spielhofer
Sent: Friday, 20 August 2021 7:20 PM
To: qgis-user 
Subject: [Qgis-user] Length of lines in polygon depending on attribute

 

Hi,

I have a polygon layer and a line layer.

I would like to update a field in the polygon layer with the length of the 
lines in each polygon that have a certain value in an attribute.

I thought I use the field calculator and the aggregate function but I did not 
succeed.

What I have now is:

 

aggregate( layer:='line_layer', aggregate:= 'sum', expression:='length', 
filter:='measure=1')

 

which returns NULL

 

In the line layer there is an attribute 'length' that already holds the length 
of the element.

I only want the lines that have the attribute "measure=1".

 

Any help appreciated!

 

Regards,

Roland

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Training manual import of .qml files

[Phil Wyatt]

Hi Walt,

Head to Layer Properties and down the bottom there is a 'style' button.
Click on that and choose Load Style, then click on the three dots ... to
select the required style file (qml)

Cheers - Phil

-Original Message-
From: Qgis-user  On Behalf Of Walt Haas
Sent: Wednesday, 25 August 2021 2:12 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Training manual import of .qml files

Hi, I'm a clueless newbie trying to work through the training manual. 
2.4.10 point 2. says "Load the style file advanced_levels_demo.qml provided
in exercise_data/styles".  This seems to imply using the style manager, but
the browser only opens XML files.  To further cloud the issue, Appendix C
says "2.8.3.3 ... QML is an XML format for storing layer styling." but the
style manager file browser doesn't believe it.

It seems like a bug in the documentation to omit how to do this, and I've
filed an issue on the documentation.  In the meantime, can anyone give me a
clue?

Thanks  -- Walt
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Font size

[Phil Wyatt]

Hi Sylvia,

 

Try under settings, Options, General, Application, Fonts and up the font
size as desired. Then shut down and restart QGIS. You can also increase the
size of all the icons as well if required.

 

NOTE – I gather this may not affect font sizes in every part of QGIS but
does in most areas.

 

Cheers

 

From: Qgis-user  On Behalf Of Preuß,
Sylvia
Sent: Tuesday, 7 December 2021 8:10 PM
To: 'qgis-user@lists.osgeo.org' 
Subject: [Qgis-user] Font size

 

Hello,

 

does anybody know how to change / enlarge the font size of the
QGIS-menu-entries, toolbar, layer-names et cetera?

 

Thank you

Sylvia

  _  


Der E-Mail-Dienst des Oberbergischen Kreises dient ausschließlich der
dienstlichen Kommunikation.
Senden Sie deshalb keine E-Mails privaten Inhalts an E-Mail-Adressen des
Oberbergischen Kreises.
Es wird darauf hingewiesen, dass neben der Person, an die Ihre E-Mail
gerichtet ist, auch deren Vertretung im Amt einen unmittelbaren Zugriff auf
Ihre Nachricht hat. Für Berufsgeheimnisträger und besondere Funktionsträger
gelten abweichende Regelungen.
Es wird außerdem darauf hingewiesen, dass die Kommunikation per E-Mail ohne
Authentifizierung und Verschlüsselung unsicher ist, da für unberechtigte
Dritte grundsätzlich die Möglichkeit der Kenntnisnahme und Manipulation
besteht.
Es wird deshalb keine Verantwortung für den Inhalt dieser Nachricht
übernommen, da eine Manipulation nicht ausgeschlossen werden kann.
Obwohl alle angemessenen Vorkehrungen getroffen wurden, um sicherzustellen,
dass Anlagen dieser E-Mail virusgeprüft sind, wird empfohlen, anhängende
Dateien vor dem Öffnen durch Ihr eigenes Virus-Programm zu prüfen, da
keinerlei Haftung für Schäden übernommen wird, die infolge etwaiger
Software-Viren entstehen könnten.
Der Inhalt dieser E-Mail ist ausschließlich für die bezeichnete Person
bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen
Vertretung sein sollten, beachten Sie bitte, dass jede Form der
Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des
Inhalts dieser E-Mail unzulässig ist. In diesem Fall wird darum gebeten,
sich mit der absendenden Person der E-Mail in Verbindung zu setzen. 

  _  

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] [EXTERNAL]Re: Possible bug? Error 499 on connection even after using token

[Phil Wyatt]

Alas, without a public URL for us to test it may be difficult for us to help 
with a solution

 

Cheers - Phil

 

From: Alex Jokerst  
Sent: Friday, 24 December 2021 8:35 AM
To: Phil Wyatt 
Cc: qgis-user@lists.osgeo.org
Subject: RE: [EXTERNAL]Re: [Qgis-user] Possible bug? Error 499 on connection 
even after using token

 

Hey Phil,

 

Unfortunately, this is a corporate owned dataset from accuweather. I followed 
the steps similar to this guide: How to: Add an ArcGIS Server Feature Service 
(Esri Token Authentication) in QGIS – Help Centre (data.wa.gov.au) 
<https://toolkit.data.wa.gov.au/hc/en-gb/articles/360001044975-How-to-Add-an-ArcGIS-Server-Feature-Service-Esri-Token-Authentication-in-QGIS#:~:text=Under%20Data%20and%20Resources%2C%20select%20ArcGIS%20Server%20Feature,ArcGIS%20FeatureServer%20Layer%2C%20and%20then%20select%20New%20.>
  but no luck. When reaching out to accuweather they didn’t really give me any 
good feedback.

 

Thanks,

Alex 

 

From: Phil Wyatt mailto:p...@wyatt-family.com> > 
Sent: Thursday, December 23, 2021 4:29 PM
To: Alex Jokerst mailto:ajoke...@ufcic.com> >
Cc: qgis-user@lists.osgeo.org <mailto:qgis-user@lists.osgeo.org> 
Subject: [EXTERNAL]Re: [Qgis-user] Possible bug? Error 499 on connection even 
after using token

 

Is this from a public dataset or your own corporate dataset? This may be the 
issue

 

https://gis.stackexchange.com/questions/352636/qgis-connection-to-esri-feature-server-failed-to-retrieve-service-capabilities
 
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgis.stackexchange.com%2Fquestions%2F352636%2Fqgis-connection-to-esri-feature-server-failed-to-retrieve-service-capabilities&data=04%7C01%7Cajokerst%40ufcic.com%7C087be256d707415233bc08d9c65b4901%7Cf38d1568908e499882a0542f4bbd49a2%7C1%7C0%7C637758918563268137%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8rGenlWeQvbMWYN5Gh5DC9OMCSXbkJ%2BOUlTmu0f%2FRxU%3D&reserved=0>
 

 

Cheers - Phil, 

On the road with his iPad 

 

On 24 Dec 2021, at 7:45 am, Alex Jokerst mailto:ajoke...@ufcic.com> > wrote:

 

Hi there,

 

I am unable to access Arcgis layer due to error 499 on connection. This seems 
to indicate that there is a token problem but I did use the correct token. Any 
ideas?

 

--Alex J

 

 


Alex Jokerst

Information Technology Analyst

Universal Fire & Casualty Insurance Company







o:

m:
e:
a:


(614) 982-0993

(614) 747-3621
 <mailto:ajoke...@ufcic.com> ajoke...@ufcic.com
2121 Airport Rd

Waterford MI 48327-1207

Ufcic.com

 

 

The Information contained in this message is privileged and confidential. It is 
intended only to be read by the individual or entity to whom it is addressed or 
their designee. Unless you are the named addressee or an authorized designee, 
you may not copy or use it, or disclose it to anyone else. If the reader of 
this message is not the intended recipient, you are on notice that any 
distribution of this message, in any form, is strictly prohibited. If you 
receive this message in error, please immediately notify the sender, and delete 
or destroy any copy of this message.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org> 
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

The Information contained in this message is privileged and confidential. It is 
intended only to be read by the individual or entity to whom it is addressed or 
their designee. Unless you are the named addressee or an authorized designee, 
you may not copy or use it, or disclose it to anyone else. If the reader of 
this message is not the intended recipient, you are on notice that any 
distribution of this message, in any form, is strictly prohibited. If you 
receive this message in error, please immediately notify the sender, and delete 
or destroy any copy of this message.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Possible bug? Error 499 on connection even after using token

[Phil Wyatt]

Is this from a public dataset or your own corporate dataset? This may be the 
issue

https://gis.stackexchange.com/questions/352636/qgis-connection-to-esri-feature-server-failed-to-retrieve-service-capabilities


Cheers - Phil, 
On the road with his iPad 

> On 24 Dec 2021, at 7:45 am, Alex Jokerst  wrote:
> 
> 
> Hi there,
>  
> I am unable to access Arcgis layer due to error 499 on connection. This seems 
> to indicate that there is a token problem but I did use the correct token. 
> Any ideas?
>  
> --Alex J
>  
>  
> Alex Jokerst
> Information Technology Analyst
> Universal Fire & Casualty Insurance Company
> 
> 
> o:
> m:
> e:
> a:
> 
> (614) 982-0993
> (614) 747-3621
> ajoke...@ufcic.com
> 2121 Airport Rd
> Waterford MI 48327-1207
> Ufcic.com
>  
>  
> The Information contained in this message is privileged and confidential. It 
> is intended only to be read by the individual or entity to whom it is 
> addressed or their designee. Unless you are the named addressee or an 
> authorized designee, you may not copy or use it, or disclose it to anyone 
> else. If the reader of this message is not the intended recipient, you are on 
> notice that any distribution of this message, in any form, is strictly 
> prohibited. If you receive this message in error, please immediately notify 
> the sender, and delete or destroy any copy of this message.
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Legend layout editor

[Phil Wyatt]

Hi Camilo,

 

There is a good tutorial on custom legends here - 
https://www.youtube.com/watch?v=rb3EZSs9q4w

 

I assume you are after something over and above what you have created in the 
map window.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Camilo 
Aristizabal
Sent: Wednesday, 12 January 2022 12:59 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Legend layout editor

 

Hi all,

 

Does someone know how to customize the automatic legend QGis generates? The 
simple one shows no options to edit every single item I'd like to appear as I 
need. 

 

Thanks

 

Camilo 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Import kml with all the fields

[Phil Wyatt]

Hi Kryshna

 

Its also possible to ‘drag and drop’ the kml from the file manager to the map 
window. You might also let us know where the kml was created as the error may 
be from the original source rather than a QGIS issue. Do the other fields show 
up if opened in Google Earth?

 

Cheers - Phil

 


Em quinta-feira, 20 de janeiro de 2022 22:19:46 BRT, krishna Ayyala 
mailto:ayyalakris...@gmail.com> > escreveu: 

 

 

Hello,

I have a kml that has a point layer with about 50 Points. Each point has four 
fields. Field1,Field2,Field3 and Field4. I have imported this kml into qgis. 
When I open the attribute table, I see only Field1. Is there a way to import 
the kml so that I can see all the 4 fields in the attribute table?

 

Regards.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org  
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Import kml with all the fields

[Phil Wyatt]

Can you provide a sample of the file if the data is not private?

 

From: krishna Ayyala  
Sent: Friday, 21 January 2022 4:08 PM
To: Phil Wyatt 
Cc: Camilo Aristizabal ; qgis-user 

Subject: Re: [Qgis-user] Import kml with all the fields

 

Phil,

Thanks for the reply. I did drag and drop. But still only "Field1" shows up in 
the attribute table. There are other fields such as "description", "timestamp", 
"begin", "end" which show in the attribute table. These other fields are 
automatically generated when I add kml to the map. But all I am interested to 
see are Field1,Field2,Field3 and Field4.. The only useful filed I see is  
Field1. When I open this kmz in google earth and click on any point, I see all 
the four fields. Is there a way to see all these four fields in QGIS?

 

Regards

 

On Thu, Jan 20, 2022 at 9:23 PM Phil Wyatt mailto:p...@wyatt-family.com> > wrote:

Hi Kryshna

 

Its also possible to ‘drag and drop’ the kml from the file manager to the map 
window. You might also let us know where the kml was created as the error may 
be from the original source rather than a QGIS issue. Do the other fields show 
up if opened in Google Earth?

 

Cheers - Phil

 


Em quinta-feira, 20 de janeiro de 2022 22:19:46 BRT, krishna Ayyala 
mailto:ayyalakris...@gmail.com> > escreveu: 

 

 

Hello,

I have a kml that has a point layer with about 50 Points. Each point has four 
fields. Field1,Field2,Field3 and Field4. I have imported this kml into qgis. 
When I open the attribute table, I see only Field1. Is there a way to import 
the kml so that I can see all the 4 fields in the attribute table?

 

Regards.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org> 
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Import kml with all the fields

[Phil Wyatt]

Is it KML (single file) or KMZ which may contain multiple files? Unzip the KMZ 
and have a look at the files – maybe there is some way to connect/join the 
different files via a common field

 

https://gis.stackexchange.com/questions/365579/showing-images-linked-with-corresponding-kmz-in-qgis

 

From: krishna Ayyala  
Sent: Friday, 21 January 2022 4:08 PM
To: Phil Wyatt 
Cc: Camilo Aristizabal ; qgis-user 

Subject: Re: [Qgis-user] Import kml with all the fields

 

Phil,

Thanks for the reply. I did drag and drop. But still only "Field1" shows up in 
the attribute table. There are other fields such as "description", "timestamp", 
"begin", "end" which show in the attribute table. These other fields are 
automatically generated when I add kml to the map. But all I am interested to 
see are Field1,Field2,Field3 and Field4.. The only useful filed I see is  
Field1. When I open this kmz in google earth and click on any point, I see all 
the four fields. Is there a way to see all these four fields in QGIS?

 

Regards

 

On Thu, Jan 20, 2022 at 9:23 PM Phil Wyatt mailto:p...@wyatt-family.com> > wrote:

Hi Kryshna

 

Its also possible to ‘drag and drop’ the kml from the file manager to the map 
window. You might also let us know where the kml was created as the error may 
be from the original source rather than a QGIS issue. Do the other fields show 
up if opened in Google Earth?

 

Cheers - Phil

 


Em quinta-feira, 20 de janeiro de 2022 22:19:46 BRT, krishna Ayyala 
mailto:ayyalakris...@gmail.com> > escreveu: 

 

 

Hello,

I have a kml that has a point layer with about 50 Points. Each point has four 
fields. Field1,Field2,Field3 and Field4. I have imported this kml into qgis. 
When I open the attribute table, I see only Field1. Is there a way to import 
the kml so that I can see all the 4 fields in the attribute table?

 

Regards.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org> 
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Labeling Lines with Bearings

[Phil Wyatt]

Hi Spring,

Bottom  couple of posts in this stackexchange question should get you started

https://gis.stackexchange.com/questions/55449/how-do-i-find-vector-line-bearing-in-qgis-or-grass

Cheers - Phil

-Original Message-
From: Qgis-user  On Behalf Of Springfield 
Harrison
Sent: Thursday, 3 February 2022 10:30 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Labeling Lines with Bearings

Hello,

I need to put the line direction (azimuth) into a line label. Some searching 
has not come up with anything.

Is there a way?  Thanks very much . . . .


Cheers, Spring



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] “Merge Shapefiles to One"?

[Phil Wyatt]

Hi Rick,

 

Some of the processing tools are not turned on by default. Head to Plugins, 
Manage and Install Plugins, and make sure the ‘Processing’ plugin is ticked and 
the see if it appears. The Merge Vector Layers should also do the same thing 
but you need to watch the field structures of the files.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Richard 
Weinmeyer
Sent: Monday, 7 February 2022 5:06 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] “Merge Shapefiles to One"?

 

Hello,

 

I’m brand new to QGIS and fairly new to GIS in general. I am using QGIS 
3.22.3-Białowieża in Mac OS Monterey.

 

Question: I’m learning how to combine shapefiles, and every guide I’ve looked 
at says to go to Vector —> Data Management Tools —> Merge Shapefiles to One. 
However, there is no “Merge Shapefiles to One” option. Has this feature been 
renamed or removed? Are there other ways to merge shapefiles?

 

Thanks in advance for any help that can be offered.

 

Cheers,

Rick 

 

 

 

 

 

 

 

 

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Legend Counts

[Phil Wyatt]

Hi Peter
I gather that the filter, only filters by the composer map screen. My points 
are within that screen but I don't wish to show them.


Cheers - Phil, 
On the road with his iPad 

> On 17 Mar 2016, at 6:33 PM, Peter Schürch  wrote:
> 
> Hi Phil
> What happens if you set a filter on the layer (right click on layer in layer 
> tree > Filter) to exclude the data you don’t want to count in the legend?
>  
> Peter
>  
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Phil 
> (The Geek) Wyatt
> Gesendet: Donnerstag, 17. März 2016 01:13
> An: Qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Legend Counts
>  
> Hi Folks,
>  
> I have a legend that has a couple of categories removed but the overall count 
> does not take this into account. Is there a way to fix this?
>  
> 2169 is the total (including dates not showing) - it should actually read 2163
>  
> 
>  
> Cheers - Phil
>  
> Kiva Lender, Thin Green Line Supporter, Volunteer Mapper (GISMO) - Red Cross, 
> Wildcare Volunteer
>  
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Legend Counts

[Phil Wyatt]

Sorry, I misread your post. I will try that when I get back home


Cheers - Phil, 
On the road with his iPad 

> On 17 Mar 2016, at 6:33 PM, Peter Schürch  wrote:
> 
> Hi Phil
> What happens if you set a filter on the layer (right click on layer in layer 
> tree > Filter) to exclude the data you don’t want to count in the legend?
>  
> Peter
>  
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Phil 
> (The Geek) Wyatt
> Gesendet: Donnerstag, 17. März 2016 01:13
> An: Qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Legend Counts
>  
> Hi Folks,
>  
> I have a legend that has a couple of categories removed but the overall count 
> does not take this into account. Is there a way to fix this?
>  
> 2169 is the total (including dates not showing) - it should actually read 2163
>  
> 
>  
> Cheers - Phil
>  
> Kiva Lender, Thin Green Line Supporter, Volunteer Mapper (GISMO) - Red Cross, 
> Wildcare Volunteer
>  
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Selecting records

[Phil Wyatt]

Thanks Pierma,

I can sort the dates no worries, so that should work. Many thanks.


Cheers - Phil, 
On the road with his iPad 

> On 30 Mar 2016, at 3:58 PM, Pierre-Marie Le Dantec 
>  wrote:
> 
> Hi Phil,
> 
> For manipulating dates throught SQL you should use ISO format ("-MM-DD").
> 
> Then, you can use a virtual layer with :
> 
> SELECT stationid, MAX(obs_date) FROM your_layer GROUP BY stationid
> 
> Cheers,
> 
> Pierma
> 
> 2016-03-30 13:09 GMT+11:00 Phil (The Geek) Wyatt :
>> I must be thick, but I can't get my head around this in QGIS
>> 
>>  
>> 
>> Data
>> 
>> stationid_
>> 
>> obs_date
>> 
>> BK21
>> 
>> 28/03/2016
>> 
>> BK21
>> 
>> 29/03/2016
>> 
>> BK21
>> 
>> 30/03/2016
>> 
>> BL22
>> 
>> 28/03/2016
>> 
>> BL22
>> 
>> 29/03/2016
>> 
>> BL22
>> 
>> 30/03/2016
>> 
>> BL22
>> 
>> 31/03/2016
>> 
>>  
>> 
>>  
>> 
>> How do I select the Maximum date for each station ID?
>> 
>>  
>> 
>> The data will be coming from a GEOJSON feed but I can also pull it as a 
>> shape file if needs be
>> 
>>  
>> 
>>  
>> 
>> Cheers - Phil
>> 
>> 
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> 
> 
> -- 
> Pierre-Marie Le Dantec
> 
> 73.64.34
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Converting Alberta Township System

[Sir Phil Wyatt]

HI Michael,

I don't suppose it's available as a layer already? There seems to be quite a
few resources here

http://canadiangis.com/data.php

Cheers - Phil
(at the other end of the planet - Tasmania, Australia!)


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Atlas Map book - Display only one feature on each page.

[Phil Wyatt via Qgis-user]

Hi there,

 

Your settings look correct to create an atlas BUT if the three lines are 
actually close together then they may still appear in each atlas page, 
depending on your map settings. You could try to reduce the margin around the 
feature.

 



 

Another alternative, if the features are close together, is to maybe style the 
atlas feature in a different way so that its highlighted differently to the 
other line features.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of krishna Ayyala 
via Qgis-user
Sent: Tuesday, 8 March 2022 2:24 PM
To: qgis-user 
Subject: [Qgis-user] Atlas Map book - Display only one feature on each page.

 

Hello,

I am reposting this question. Can anyone help me?This is the map on my Print 
composer window. In my attribute table, I have a field called Line_ID. There 
are three lines in this field; LINE 1, LINE 2 AND LINE 3..I wish to export this 
to mapbook. My mapbook will have 3 pages. I wish to export such that, each page 
has only one line. i.e. Page1 should have LINE 1, Page2 should have LINE 2 AND 
Page3 should have LINE 3. What should be the setting in my Atlas window to 
accomplish this task?





 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] adding a layer from a zipped file

[Phil Wyatt via Qgis-user]

Hi Stephen,

 

You might let us know your operating system and which version of QGIS you are 
using because it works as you desire in the latest development (3.24.3)  and 
Long Term Release versions (3.22.7). It may just be a matter of updating QGIS.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Stephen Sacks 
via Qgis-user
Sent: Sunday, 29 May 2022 5:29 AM
To: qgis forum 
Subject: [Qgis-user] adding a layer from a zipped file

 


When I write a layer as a shape file, it appears on my C: drive as six files, 
all with the same name but different extensions.  Then I zip those six into a 
single file (xxx.zip).  When I reload that layer from the zip file (Layer > 
AddLayer > VectorLayer > File > Dataset > xxx.zip), QGIS is almost smart enough 
to restore the layer correctly.  The polygon features are in the right place 
and their attribute table is correct.My problem is that it ignores one of 
the six files, the "style" file (xxx .qml) which  specifies color, labeling, 
and symbol).  Do I  have to unzip before restoring layer xxx ?  I know I could 
open the layer's properties and use  Style > Load Style from  file xxx.qml .  
But when I'm restoring several layers that's a lot of key strokes (and may 
require that I unzip).  It seems to me that this shouldn't be necessary.  [I 
encounter the same problem with point layers and polygon layers.]



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Scrolling using the mouse wheel in a layout >-- CRASH

[Phil Wyatt via Qgis-user]

No problems for me on a Windows 10 setup running 3.26

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Tony
Shepherd (FarmMaps NZ) via Qgis-user
Sent: Monday, 4 July 2022 9:32 AM
To: 'Qgis Users List' 
Subject: [Qgis-user] Scrolling using the mouse wheel in a layout >-- CRASH

 

Hi

 

Is anybody else having issues when using a mouse scroll wheel for zooming in
a layout window that QGIS continually crashes?  This has only started
happening since upgrading to 3.26

 

Cheers

Tony

 

Tony Shepherd  |  GeoSpatial / Mapping Manager

Ph 027 435 6193  |  E t...@farmmaps.nz  

FarmMaps NZ, 3 Kerwood Place, Gore 9740

 



 

 

 
 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS Atlas Print dpi street names

[Phil Wyatt via Qgis-user]

Hi Lars,

 

If the background is a raster map (like OpenStreetMap) then no, you cant 
control the labelling. You would need to add a vector layer for the roads and 
then style the labels from that new layer.

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of Lars Bendix 
via Qgis-user
Sent: Sunday, 14 August 2022 9:55 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] QGIS Atlas Print dpi street names

 

Hello,

 

Thank you so much for your help!!!

 

I would like to print polygon objects using the atlas print function with 300 
dpi instead of 75 dpi. But as I realized, the street names look too small now. 
Is there a way to adjust the font size of the street names in the atlas print 
preview?

 

Thank you!

Lars

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] CAP-AU XML's to QGIS

[Phil Wyatt via Qgis-user]

Hi Folks,

 

Does anyone have any leads on getting these 'Common Alerting Protocol' xml
files into QGIS?

 

Sample site - https://alert.tas.gov.au/data/cap-au.xml

 

Cheers - Phil

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Can't Open QGIS

[Phil Wyatt via Qgis-user]

Hi Roland

 

Head to C:\Program Files\QGIS 3.28.1\bin\qgis-bin.exe - that will start up
QGIS desktop

 

Also check your desktop for a folder QGIS 3.28.1 that has links to all the
common programs

 

Cheers - Phil

 

From: Qgis-user  On Behalf Of
roland.spencerjones--- via Qgis-user
Sent: Saturday, 26 November 2022 7:59 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Can't Open QGIS

 

Hi, 

 

I've been using QGIS for years, and installed periodic updates during that
time. However, in the last month I've tried downloading newer versions of
QGIS (initially 3.28, more recently 3.22) and although they seem to
download, and Control Panel (Uninstall a programme) shows that they are
downloaded, the app doesn't come up in my list of Apps. So, I don't know how
to open the downloaded version. What do I click on to get it started?

 

I'm using latest version Windows 10, on a 64-bit Dell machine. 

 

Help!! Anyone got any ideas?

 

Thanks, Roland (Scotland)

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil Wyatt via QGIS-User]

Hi there,

I am using 3.22.13 and it shows the values that match as I start typing in
values.

Cheers - Phil

-Original Message-
From: QGIS-User  On Behalf Of Guilherme
Pereira via QGIS-User
Sent: Friday, 23 December 2022 5:58 AM
To: qgis-user@lists.osgeo.org
Cc: Marcia Coelho 
Subject: [Qgis-user] (no subject)

GOOD AFTERNOON,

QGIS DESKTOP USERS, ANYONE WHO CAN HELP ME.

I WAS USING QGIS VERSION 3.10, AND WHEN I USED THE "SELECT FEATURES BY
VALUE" OPTION (SHORTCUT F3), AND WHEN I STARTED TYPING WHAT I NEEDED, THE
SOFTWARE SHOWED THE EXISTING OPTIONS IN THE DATABASE.

BUT NOW I AM USING VERSION 3.22, AND WHEN USING "SELECT FEATURES BY VALUE"
(SHORTCUT F3), THE SOFTWARE DOES NOT SHOW FEATURES WITH NAMES THAT EXIST IN
THE DATABASE.

DOES ANYONE KNOW HOW TO CONFIGURE THIS "SELECTION SUGGESTION" THAT HAS IN
VERSION 3.10?



BOA TARDE,

USUÁRIOS DO QGIS DESKTOP, ALGUÉM QUE POSSA ME AJUDAR.

EU UTILIZAVA A VERSÃO DO QGIS VERSÃO 3.10, E QUANDO EU USAVA A OPÇÃO
"SELECIONAR FEIÇÕES POR VALOR" (ATALHO F3), E AO COMEÇAR DIGITAR  O QUE EU
PRECISAVA, O SOFTWARE MOSTRAVA AS OPÇÕES EXISTENTE NO BANCO DE DADOS.

POREM AGORA EU ESTOU UTILIZANDO A VERSÃO 3.22, E AO USAR "SELECIONAR FEIÇÕES
POR VALOR" (ATALHO F3), O SOFTWARE NÃO MOSTRA AS FEIÇÕES  COM NOMES
EXISTENTE NO BANCO DE DADOS.

ALGUÉM SABE COMO CONFIGURAR ESSA"SUGESTÃO DE SELEÇÃO" QUE TEM NA VERSÃO
3.10?







Antes de imprimir pense em sua responsabilidade e compromisso com o Meio
Ambiente !
As informações contidas neste e-mail, incluindo arquivos anexos, são
confidenciais e dirigidas exclusivamente ao destinatário, podendo estar
legalmente protegidas. Se esta mensagem não for destinada a você, por favor
apague-a e informe imediatamente ao remetente. As opiniões pessoais do
remetente não são, necessariamente, coincidentes com o posicionamento da
empresa, não sendo a Sanasa Campinas responsável pelo conteúdo da mensagem.
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user