Re: [Ql-Users] Using different devices
... using LRUN, seems to clear the BASIC memory area of a windrive$ variable that I have just obtained from user input. Try MRUN whihc does a MERGE and doesn't/shouldn't clear your variables - assuming I'm remembering correctly of course. Cheers, Norman. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
In message [EMAIL PROTECTED], [EMAIL PROTECTED] writes ... using LRUN, seems to clear the BASIC memory area of a windrive$ variable that I have just obtained from user input. Try MRUN whihc does a MERGE and doesn't/shouldn't clear your variables - assuming I'm remembering correctly of course. Cheers, Norman. Thanks, Norman. I have done that now, and it works as I wanted it to. I have also set a : DEV_USE 1,windrive$'_' ( windrive$ being a variable obtained from user input ) So that DEV1_ can be the psuedo device for any windrive number that is assigned when using software like QDT and Launchpad. I could have set it up this way before, yet it is only now that I have seen the need to have the flexibility available. It shows how useful SMSQ/E is as an OS. -- Malcolm Cadman ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
In message [EMAIL PROTECTED], P Witte [EMAIL PROTECTED] writes Malcolm Cadman writes: Can anyone help me with using a portable Zip Drive as a source, running QPC, and being attached to 2 different PC's ( not at the same time ) ? On the first computer it is seen as a source - win2_ - on the second computer it is seen as a source - win4_ The software - like QDT and Launchpad - is configured to recognise the win drive source as - win2_ Which means when the source is seen as - win4_ - this is not correct. Also, rather than have one very long boot file to load everything, I have a number of small boot files that load one after the other, depending on what configuration I am using. Is there an easy way to preserve the value the physical source - in this case either as win2_ or win4_ across the different boot files ? Can DEV_USE do this ? Or an Environment variable ? At present my initial, short, boot file just gets input from the user as to which computer is being used, which sets windrive$ to either be - win2_ or win4_ However, the value is not being held when the next boot file is loaded with an LRUN. Ive made a QPC2 system to run off a USB memory stick. This should be pretty much the same for a zip disk, but I'm not sure.. Thanks, Per. We are a clever lot with the things that we do :-) . as you say a Zip drive is just another device, just like a USB. So, your example below is valid. However, I am using 2 older PC's here, with WIN95, that do not have built in USB ports - although they could still take a PCI Card for that purpose - hence the use of portable Zip Drive. One of the PC's also has a resident SqQuest drive - so that I can copy between the 2 types of Removeable hard drive disks.. Clip Once QPC2 is running you can use the SBasic function QPC_NETNAME$ to find out which machine youre running under (provided youve set this under Windows first). I have different directories for the different platforms SMSQ/E runs under, containing the different platform-specific configuration files such as printer drivers, FileInfo2_cfg, MenuConf_inf, etc. On my QPC2 systems I use the net name to tell them apart. Umm ... can you explain more about how to set up a net name ? I've not used that feature. That is interesting. Going back to what I said earlier ... having more that one boot file, one loading another, using LRUN, seems to clear the BASIC memory area of a windrive$ variable that I have just obtained from user input. I was hoping for a way of preserving that value, so that the next boot file could then use the variable. -- Malcolm Cadman ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
Malcolm Cadman writes:
Can anyone help me with using a portable Zip Drive as a source, running
QPC, and being attached to 2 different PC's ( not at the same time ) ?
Once QPC2 is running you can use the SBasic function QPC_NETNAME$ to
find out which machine youre running under (provided youve set this
under Windows first). I have different directories for the different
platforms SMSQ/E runs under, containing the different
platform-specific configuration files such as printer drivers,
FileInfo2_cfg, MenuConf_inf, etc. On my QPC2 systems I use the net
name to tell them apart.
Umm ... can you explain more about how to set up a net name ? I've not
used that feature. That is interesting.
Right click on the My Computer icon on the desktop, or open the System
module in the Control Panel. Select the Computer Name tab and click on
Change... then give your computer a nice name ;o) That name, which
should be unique on your LAN, is returned by the function QPC_NETNAME$.
Going back to what I said earlier ... having more that one boot file,
one loading another, using LRUN, seems to clear the BASIC memory area of
a windrive$ variable that I have just obtained from user input.
I was hoping for a way of preserving that value, so that the next boot
file could then use the variable.
There are different ways of passing information to SBasic jobs:
o You can MRUN (or MERGE) stuff, of course. That retains the values of
any variables set prior to MRUN.
o You can also use the EW/EX progname_bas; 'data' to pass
information to a program or module, which in turn can read that
information from the pseudo variable CMD$. Try this (call it
ram1_test_bas):
100 open#1; 'con': cls#1: print#1; CMD$: pause#1: quit
thus:
EX ram1_test; 'data'
It should print 'data' to the screen. (Note you dont have to specify
the _bas unless you also have a ram1_test_exe!)
o You can also use QUIT number to return a value from a sub program:
100 open#1; 'con': cls#1
110 IF CMD$ == 'data' then
120 print#1; 'ok!': pause#1; 100: quit 1000
130 ELSE
140 quit -15
150 END IF
Test with:
print FEW('ram1_test_bas'; 'data')
and
print FEW('ram1_test_bas'; 'x')
o You could also use the environmental varables, as implemented in
Richard Zidlicski's(?) ENV_BIN
There are other ways too, but this should be a good start.
Bestaluck!
Per
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
In message [EMAIL PROTECTED], P Witte
[EMAIL PROTECTED] writes
Malcolm Cadman writes:
Can anyone help me with using a portable Zip Drive as a source, running
QPC, and being attached to 2 different PC's ( not at the same time ) ?
Once QPC2 is running you can use the SBasic function QPC_NETNAME$ to
find out which machine youre running under (provided youve set this
under Windows first). I have different directories for the different
platforms SMSQ/E runs under, containing the different
platform-specific configuration files such as printer drivers,
FileInfo2_cfg, MenuConf_inf, etc. On my QPC2 systems I use the net
name to tell them apart.
Umm ... can you explain more about how to set up a net name ? I've not
used that feature. That is interesting.
Right click on the My Computer icon on the desktop, or open the System
module in the Control Panel. Select the Computer Name tab and click on
Change... then give your computer a nice name ;o) That name, which
should be unique on your LAN, is returned by the function QPC_NETNAME$.
Ah yes, renaming the My Computer name ...
Going back to what I said earlier ... having more that one boot file,
one loading another, using LRUN, seems to clear the BASIC memory area of
a windrive$ variable that I have just obtained from user input.
I was hoping for a way of preserving that value, so that the next boot
file could then use the variable.
There are different ways of passing information to SBasic jobs:
o You can MRUN (or MERGE) stuff, of course. That retains the values of
any variables set prior to MRUN.
Ah ... that is the one ! I had forgotten about MERGE and RUN.
Implementing that has solved my problem ! Thanks Per !!
All I then had to do was to renumber my boot files, so that the line
numbers are as successive groups, for each of the individual boot files.
In my case ... first boot file is numbered from Line 10 onwards ... then
second boot file is numbered from Line 500 onwards ... then the third
boot file(s) are all numbered from LINE 1000 onwards ( the third boot
file are different configurations at runtime ).
It now works fine ... :-)
I did look up the HISTORY command - pages 61 and 62 in the QPC_Concepts
PDF.
That used as a virtual device did what I was trying to achieve, however,
the LRUN was losing the value :
500 OPEN_NEW#4,HISTORY_device : REMark Open a new HISTORY as Public
510 PUT#4,windrive$ : REMark Put the value of windrive$ in to the
HISTORY
. later
600 GET#4,drive$ : REMark Get the value out of the HISTORY when needed
I had not used this before ... an interesting Command. Similar to
PIPES, but a bit easier to use.
The values with HISTORY are read out as LIFO - Last In First Out.
I didn't need to use these further more complex ideas. Although, thanks
for the brainstorm ... :-)
o You can also use the EW/EX progname_bas; 'data' to pass
information to a program or module, which in turn can read that
information from the pseudo variable CMD$. Try this (call it
ram1_test_bas):
100 open#1; 'con': cls#1: print#1; CMD$: pause#1: quit
thus:
EX ram1_test; 'data'
It should print 'data' to the screen. (Note you dont have to specify
the _bas unless you also have a ram1_test_exe!)
o You can also use QUIT number to return a value from a sub program:
100 open#1; 'con': cls#1
110 IF CMD$ == 'data' then
120 print#1; 'ok!': pause#1; 100: quit 1000
130 ELSE
140 quit -15
150 END IF
Test with:
print FEW('ram1_test_bas'; 'data')
and
print FEW('ram1_test_bas'; 'x')
o You could also use the environmental varables, as implemented in
Richard Zidlicski's(?) ENV_BIN
Yes, there should be a way of doing what I wanted with an environment
variable ... yet my efforts failed ... :-(
There are other ways too, but this should be a good start.
Bestaluck!
Yes, I have had the luck ... :-) ... thanks again.
--
Malcolm Cadman
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
Marcel Kilgus writes: I can configure the shortcut to start in %CD%\QPC2\ (%CD% being a system variable for the current directory). However the target and icon locations appear, stupidly, to have to be specified exactly: K:\QPC2\QPC2.exe. Is there a way around this? Probably not, but why exactly do you have the shortcut? Depending on why you use it, a batch file instead might be an option. I thought it nicer just to have an icon in the root of the device rather than opening a folder first to locate the executable.. A batch file does the trick: /qpc2/qpc2.exe Problem is the console wont go away until I quit QPC2.. Thanks for the tip anyway! Per ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
P Witte wrote: I thought it nicer just to have an icon in the root of the device rather than opening a folder first to locate the executable.. A batch file does the trick: /qpc2/qpc2.exe Problem is the console wont go away until I quit QPC2.. Using start \qpc2\qpc2.exe in the file instead should do the trick. Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
Marcel Kilgus writes: I thought it nicer just to have an icon in the root of the device rather than opening a folder first to locate the executable.. A batch file does the trick: /qpc2/qpc2.exe Problem is the console wont go away until I quit QPC2.. Using start \qpc2\qpc2.exe in the file instead should do the trick. In the end I settled for a QPC2.bat containing: @echo off title QPC2 Shortcut start /d qpc2 /b qpc2.exe rem Bell chr(7)) exit Thanks again, Per ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
[Ql-Users] Using different devices
Hi, Can anyone help me with using a portable Zip Drive as a source, running QPC, and being attached to 2 different PC's ( not at the same time ) ? On the first computer it is seen as a source - win2_ - on the second computer it is seen as a source - win4_ The software - like QDT and Launchpad - is configured to recognise the win drive source as - win2_ Which means when the source is seen as - win4_ - this is not correct. Also, rather than have one very long boot file to load everything, I have a number of small boot files that load one after the other, depending on what configuration I am using. Is there an easy way to preserve the value the physical source - in this case either as win2_ or win4_ across the different boot files ? Can DEV_USE do this ? Or an Environment variable ? At present my initial, short, boot file just gets input from the user as to which computer is being used, which sets windrive$ to either be - win2_ or win4_ However, the value is not being held when the next boot file is loaded with an LRUN. -- Malcolm Cadman ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
Malcolm Cadman writes: Can anyone help me with using a portable Zip Drive as a source, running QPC, and being attached to 2 different PC's ( not at the same time ) ? On the first computer it is seen as a source - win2_ - on the second computer it is seen as a source - win4_ The software - like QDT and Launchpad - is configured to recognise the win drive source as - win2_ Which means when the source is seen as - win4_ - this is not correct. Also, rather than have one very long boot file to load everything, I have a number of small boot files that load one after the other, depending on what configuration I am using. Is there an easy way to preserve the value the physical source - in this case either as win2_ or win4_ across the different boot files ? Can DEV_USE do this ? Or an Environment variable ? At present my initial, short, boot file just gets input from the user as to which computer is being used, which sets windrive$ to either be - win2_ or win4_ However, the value is not being held when the next boot file is loaded with an LRUN. Ive made a QPC2 system to run off a USB memory stick. This should be pretty much the same for a zip disk, but I'm not sure.. On the USB disk I have the following structure: QPC2.lnk; Shortcut to QPC2 - QPC2 ; QPC2 program directory QPC2.exe; QPC2 executable .. ; other stuff - win1 QXL.win ; win1_ - win2 QXL.win ; win2_ .. Ive configured QPC2 to use the following devices: \win1\QXL.win for win1_, \win2\QXL.win for win2_, etc That means that whatever drive letter Windows issues for the USB drive QPC2 will always find my QXL.win files. Once QPC2 is running you can use the SBasic function QPC_NETNAME$ to find out which machine youre running under (provided youve set this under Windows first). I have different directories for the different platforms SMSQ/E runs under, containing the different platform-specific configuration files such as printer drivers, FileInfo2_cfg, MenuConf_inf, etc. On my QPC2 systems I use the net name to tell them apart. Thats all you really need to do to get QPC2 to work on different systems. However, in my case I wanted to configure the Windows shortcut (QPC.lnk as above)to be drive letter-independent too, but that only partially worked. Perhaps someone knows a way of doing this? I can configure the shortcut to start in %CD%\QPC2\ (%CD% being a system variable for the current directory). However the target and icon locations appear, stupidly, to have to be specified exactly: K:\QPC2\QPC2.exe. Is there a way around this? Per ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Using different devices
P Witte wrote: [snip] Yeah, what he said. ;-) Per's answer is right to the point. I can configure the shortcut to start in %CD%\QPC2\ (%CD% being a system variable for the current directory). However the target and icon locations appear, stupidly, to have to be specified exactly: K:\QPC2\QPC2.exe. Is there a way around this? Probably not, but why exactly do you have the shortcut? Depending on why you use it, a batch file instead might be an option. Marcel ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
