Re: [qmailtoaster] Fwd: SPAMDYKE TIMEOUT

[Chandran Manikandan]

Hi Finn,

Our clients are sending the emails to my personal and my official id in the
past two weeks, those emails are delivered into my personal id, but my
official id is not getting delivered then i found the above warning message
everyday.
I have allowed my client domain on whitelist_senders,recipients,rdns and
clients also getting my official emails on their server.
Could you advise how to rectify this issue.

Thanks in Advance.

On Fri, Oct 16, 2020 at 6:45 PM  wrote:

> Hi,
>
> Searching for Spamdyke TIMEOUTS gets this from Spamdyke:
>
> "Badly written software on the remote hosts. It seems a lot of spam
> software doesn't handle error codes at all. It just attempts delivery
> and expects success. When an error code is sent, the software just sits
> and waits for the success code it wants. Eventually, the connection
> times out. Sometimes, a remote server will take a long time to begin
> delivering a large (legitimate) message, which can cause timeouts."
>
> Hope it can help.
>
> /Finn
>
>
>
>
>
> Den 16-10-2020 kl. 11:42 skrev ChandranManikandan:
> >
> > Hi Friends,
> >
> >
> > One of our client emails is not delivered to our server and it is
> > showing the below log with timeout.
> >
> > Oct 16 14:33:05 mail spamdyke[4986]: TIMEOUT from: x...@xxx.com
> >  to: (unknown) origin_ip: 198.21.20.189
> origin_rdns:
> > x...@xxx.com  auth: (unknown) encryption: (none)
> > reason: TIMEOUT
> > Oct 16 14:33:25 mail spamdyke[5225]: TIMEOUT from: x...@xxx.com
> >  to: (unknown) origin_ip: 192.12.78.22 origin_rdns:
> > x...@xxx.com  auth: (unknown) encryption: (none)
> > reason: TIMEOUT
> >
> > MY OS is  CentOS Linux release 7.7.1908 (Core)
> > Qmail is qmail-1.03-3.2.qt.el7.x86_64
> > Spamdyke is spamdyke 5.0.1+TLS+CONFIGTEST+DEBUG
> > spamdyke.conf
> >
> > #dns-blacklist-entry=zombie.dnsbl.sorbs.net <
> http://zombie.dnsbl.sorbs.net>
> > #dns-blacklist-entry=dul.dnsbl.sorbs.net 
> > #dns-blacklist-entry=bogons.cymru.com 
> > dns-blacklist-entry=zen.spamhaus.org 
> > #dns-blacklist-entry=bl.spamcop.net 
> > graylist-dir=/var/spamdyke/graylist
> > graylist-level=none
> > graylist-max-secs=2678400
> > graylist-min-secs=180
> > greeting-delay-secs=8
> > header-blacklist-entry=From:*>,*<*
> > idle-timeout-secs=60
> > ip-blacklist-file=/etc/spamdyke/blacklist_ip
> > ip-in-rdns-keyword-blacklist-file=/etc/spamdyke/blacklist_keywords
> > ip-in-rdns-keyword-whitelist-file=/etc/spamdyke/whitelist_keywords
> > ip-whitelist-file=/etc/spamdyke/whitelist_ip
> > qmail-rcpthosts-file=/var/qmail/control/rcpthosts
> > #qmail-rcpthosts-file=/var/qmail/control/qmail-morercpthosts-cdb
> > log-level=info
> > max-recipients=50
> > #policy-url=http://my.policy.explanation.url/
> > rdns-blacklist-file=/etc/spamdyke/blacklist_rdns
> > rdns-whitelist-file=/etc/spamdyke/whitelist_rdns
> > recipient-blacklist-file=/etc/spamdyke/blacklist_recipients
> > recipient-whitelist-file=/etc/spamdyke/whitelist_recipients
> > reject-empty-rdns
> > reject-ip-in-cc-rdns
> > reject-sender=no-mx
> > reject-unresolvable-rdns
> > sender-blacklist-file=/etc/spamdyke/blacklist_senders
> > sender-whitelist-file=/etc/spamdyke/whitelist_senders
> > tls-certificate-file=/var/qmail/control/servercert.pem
> > tls-level=smtp
> >
> > Appreciate anyone could help me.
> >
> > --
> > */Regards,
> > Manikandan.C
> > /*
> >
> >
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>

Re: [qmailtoaster] Freshclam error

[Chandran Manikandan]

Hi Gary,

Just comment that line in /etc/freshclam.conf file then run the freshclam
command.

On Wed, Aug 12, 2020 at 12:49 AM Remo Mattei  wrote:

> I have mine changed to
>
> UpdateLogFile /var/log/freshclam.log
>
> :) so just check the /etc/freshclam.conf
>
> Remo
>
>
> On Aug 11, 2020, at 9:42 AM, Remo Mattei  wrote:
>
> my dir is empty on both of my servers :)
>
> Remo
>
> On Aug 11, 2020, at 9:39 AM, Eric Broch  wrote:
>
> Restart freshclam
>
> # systemctl restart clamav-freshclam
>
> # tail  /var/log/clamav/freshclam.log
> On 8/11/2020 10:37 AM, Gary Bowling wrote:
>
>
> Since updating clamav, I'm getting these emails.
>
>
> Subject: Cron  /usr/share/clamav/freshclam-sleep
>
> ERROR: Problem with internal logger (UpdateLogFile =
> /var/log/clamav/freshclam.log).
> ERROR: initialize: libfreshclam init failed.
> ERROR: Initialization error!
>
>
> But freshclam seems to be working, toaststat says everything is good, no
> problems with email, and the freshclam.log file is showing incremental
> updates/attempts.
>
>
> Thanks, Gary
>
>
> --
> 
> Gary Bowling
> The Moderns on Spotify 
> 
> - To
> unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For
> additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>
>
>

Re: [qmailtoaster] spam folder into gmail

[Chandran Manikandan]

Hi Eric,

I have done of your advise.
the below list of files

-rws--x--x 1 qmailq qmail  50K Apr 15  2014 qmail-dk
-rws--x--x 1 qmailq qmail  27K Apr 15  2014 qmail-queue

There is no link with qmail-queue and qmail-dk
 and there is no qmail-queue.orig file

and tcp.smtp file is like below.

127.:allow,RELAYCLIENT="",RBLSMTPD="",NOP0FCHECK="1"
:allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="50",CHKUSER_WRONGRCPTLIMIT="10",NOP0FCHECK="1",QMAILQUEUE="/var/qmail/bin/simscan"

Is it my setup is okay or did i miss anything.

Thanks.

On Mon, Sep 30, 2019 at 11:05 PM Eric Broch  wrote:

> I've removed DomainKeys (not DKIM) from qmail altogether in later versions
> and decided to use a wrapper for DKIM.
>
> So,
>
> If you have below list from /var/qmail/bin
>
> # ls -l /var/qmail/bin/qmail-queue /var/qmail/bin/qmail-queue.orig
> /var/qmail/bin/qmail-dk
> -rws--x--x 1 qmailq qmail 52096 Jan 21  2018 /var/qmail/bin/qmail-dk
> lrwxrwxrwx 1 root   root 23 Jun 14  2018 /var/qmail/bin/qmail-queue ->
> /var/qmail/bin/qmail-dk
> -rws--x--x 1 qmailq qmail 27040 Jan 21  2018
> /var/qmail/bin/qmail-queue.orig
>
> Stop qmail
>
> # qmailctl stop
>
> Remove symlink to qmail-dk
>
> # unlink /var/qmail/bin/qmail-queue
>
> Move qmail-queue.orig to qmail-queue
>
> # mv /var/qmail/bin/qmail-queue.orig /var/qmail/bin/qmail-queue
>
> Start qmail
>
> # qmailctl start
>
> Remove DKSIGN, DKVERIFY, DKQUEUE (DomainKeys) from tcp.smtp.
>
> # qmailctl cdb
>
>
> On 9/29/2019 10:56 PM, ChandranManikandan wrote:
>
> Hi Eric,
>
> Thanks for your help.
> I have successfully rectified the issue with the following your steps
> above and tested in Gmail account from squirrel webmail.
> It is working now.
>
> I have notified in /etc/tcprules.d/tcp.smtp file in below lines. Do i need
> amend the lines in this file. please let me know.
>
> DKSIGN="/var/qmail/control/domainkeys/%/private"
>
> On Sun, Sep 29, 2019 at 10:47 PM Eric Broch  wrote:
>
>> Step 2) from http://www.qmailtoaster.com/dkim.html
>>
>> At the command line first create the key and txt record for the domain
>> you want signed (replace otherdomain.com with the domain you want in
>> every command below).
>> So if your domain is mydomain.com the command would be, '# dknewkey
>> /var/qmail/control/dkim/mydomain.com.key 1024 >
>> /var/qmail/control/dkim/mydomain.com.txt'
>> # dknewkey /var/qmail/control/dkim/otherdomain.com.key 1024 >
>> /var/qmail/control/dkim/otherdomain.com.txt
>>
>> At command line change the selector in the txt record from
>> 'otherdomain.com.key._domainkey'  to  'dkim1._domainkey'
>> # perl -pi -e 's/^.*\.key/dkim1/'
>> /var/qmail/control/dkim/otherdomain.com.txt
>>
>> Check the file to see if substitution happened.
>> # cat /var/qmail/control/dkim/otherdomain.com.txt
>>dkim1._domainkey   IN  TXT "k=rsa;
>> p=**"
>>
>>
>> Create DNS TXT record for otherdomain.com using the output from the text
>> file 'otherdomain.com.txt' where your DNS settings are managed, usually
>> your ISP (mine are Godaddy).
>>HostText
>>dkim1._domainkey   IN   TXT v=DKIM1; k=rsa;
>> p=*
>>
>> Edit the signature file and add your domain. This is what the perl script
>> 'qmail-remote' will read and then call the original qmail-remote now
>> renamed to qmail-remote.orig.
>> # vi /var/qmail/control/dkim/signconf.xml
>>   > keyfile="/var/qmail/control/dkim/otherdomain.com.key" selector="dkim1">
>> 
>> 
>>   
>>
>> So file looks like this:
>>
>> 
>>   
>>   > keyfile="/var/qmail/control/dkim/global.key" method="simple"
>> selector="dkim1">
>> 
>>   
>>   > keyfile="/var/qmail/control/dkim/otherdomain.com.key" selector="dkim1">
>> 
>> 
>>   
>> 
>>
>>
>> Notes Step 2) Test your DKIM signature (Remember, replace otherdomain.com
>> with your domain).
>> # yum install epel-release opendkim
>> # opendkim-testkey - -d otherdomain.com  -k
>> /var/qmail/control/dkim/otherdomain.com.key -s dkim1
>>
>> On Sun, Sep 29, 2019 at 7:19 AM ChandranManikandan 
>> wrote:
>>
>>> Hi Eric,
>>>
>>> How do i implement DKIM for my domain. Really need your help.
>>> I have followed your 1 step only. do i need to follow all the four steps
>>> and how do i configure in DNS server.
>>> why the gmail marked into spam folder of my domains emails.
>>>
>>> Appreciate discussions and help.
>>>
>>>
>>> On Fri, Sep 27, 2019 at 11:51 PM Eric Broch 
>>> wrote:
>>>
 DKIM is not DomainKeys


 On 9/27/2019 3:54 AM, ChandranManikandan wrote:

 Hi Eric,

 I have setup Global key (default for all domains)from your link and
 also configured in dns server then i checked in mxtoolbox and getting the
 result of the domain key. after that i tried to send an email to gmail it
 is showing the error. the email header is below.

 Do i need to follow the all 4 steps.

 I will wait one day for the dns propagation and will update you.
 

Re: [qmailtoaster] Outlook keeps complaining my cert is invalid

[Chandran Manikandan]

Hi Tony,

Try letsencrypt certificate which is in Qmailtoaster.com website.
Am running letsencrypt certificate without any issue as per Eric advised.

On Sun, May 26, 2019 at 12:42 PM  wrote:

> I saw you had a .au address so that’s why nothing to do with the question
>
> > Il giorno 25 mag 2019, alle ore 20:38, Tony White  ha
> scritto:
> >
> > Remo,
> >   I do not understand how this fits with your question.
> > Too many free options out there for this kind of product.
> > Sorry.
> >
> > best wishes
> >  Tony White
> >
> >> On 26/5/19 1:18 pm, Remo Mattei wrote:
> >>
> >> My friend developed this ..
> >>
> >> http://www.mynas.com.au
> >>
> >> Thanks
> >>
> >>> On May 25, 2019, at 20:04, Tony White  t...@ycs.com.au>> wrote:
> >>>
> >>> Hi Remo,
> >>>   Try using this site from Comodo to test your certificates.
> >>>
> >>> https://crt.sh/?q=qmail7.italy1.com -> Ok
> >>>
> >>> https://crt.sh/?q=q7.italy1.com -> fails, no cert found
> >>>
> >>> https://crt.sh/?q=mail.italy1.com -> fails, no cert found
> >>>
> >>> https://crt.sh/?q=italy1.com -> fails, no cert found
> >>>
> >>> I still think it is down to your smtp and imap/pop3 server settings
> >>> in outlook.
> >>> Download Thunderbird portable and create the same account as imap
> >>> to see if it gives you the same error.
> >>>
> >>> http://portableapps.com
> >>>
> >>> best wishes
> >>>  Tony White
> >>>
>  On 26/5/19 12:50 pm, Tony White wrote:
> 
>  Remo,
>    I noticed your certificate is from Comodo.
>  My certificate is from Comodo but now named
>  Sectigo. FYI.
> 
> 
>  Are your SMTP and pop3/imap using the same or different servers?
> 
>  Ids the error on SMTP or pop3/imap?
> 
>  Try a send only then a receive to see the error is on one or the other
>  or both.
> 
>  The error is simply stating the (principal) domain cannot be verified.
> 
> 
>  best wishes
>    Tony White
> 
> > On 26/5/19 12:15 pm, Remo Mattei wrote:
> >
> > I have it on qmail7.italy1.com 
> >
> >
> >
> > Still gives me that crap!
> >
> > Hate outlook!
> >
> >> On May 25, 2019, at 19:13, Tony White  t...@ycs.com.au>> wrote:
> >>
> >> Hi Remo,
> >>   Your mail server reverse with these names.
> >>
> >> host 208.53.44.237
> >> 237.44.53.208.in-addr.arpa domain name pointer qmail7.italy1.com <
> http://qmail7.italy1.com>.
> >> 237.44.53.208.in-addr.arpa domain name pointer q7.italy1.com <
> http://q7.italy1.com>.
> >> 237.44.53.208.in-addr.arpa domain name pointer mail.italy1.com <
> http://mail.italy1.com>.
> >>
> >> If your ssl certificate is only for qmail7 and you are using either
> >> q7 or mail then maybe this is the issue.
> >>
> >> See if your outlook setup is using the qmail7 server name if not
> change
> >> it to it and try again.
> >>
> >>
> >>
> >> best wishes
> >>  Tony White
> >>
> >>> On 26/5/19 9:25 am, Remo Mattei wrote:
> >>>
> >>> I added to several places in the windows.. drives me nuts! But
> still get popups!
> >>>
> >>> Remo
> >>>
>  On May 25, 2019, at 07:58, Tony White  t...@ycs.com.au> > wrote:
> 
>  openssl s_client -connect your.server.name:443
> >>>
> >>
> >>
> >>
> -
> >> To unsubscribe, e-mail:
> qmailtoaster-list-unsubscr...@qmailtoaster.com  qmailtoaster-list-unsubscr...@qmailtoaster.com>
> >> For additional commands, e-mail:
> qmailtoaster-list-h...@qmailtoaster.com  qmailtoaster-list-h...@qmailtoaster.com>
> >>
> >
> 
> 
>  -
>  To unsubscribe, e-mail:
> qmailtoaster-list-unsubscr...@qmailtoaster.com
>  For additional commands, e-mail:
> qmailtoaster-list-h...@qmailtoaster.com
> 
> 
> >>>
> >>>
> >>> -
> >>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> >>> For additional commands, e-mail:
> qmailtoaster-list-h...@qmailtoaster.com
> >>>
> >>
> >
> >
> > -
> > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> >
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Email is not delivered to our server

[Chandran Manikandan]

Hi Eric,

I dont use any firewall device in front of server.
Okay let me check with the client dns


On Thu, May 23, 2019 at 12:01 AM Eric Broch  wrote:

> Are the users on their side getting any error messages, returned email,
> timeout, etc?
>
> Do you know what their DNS servers are, could be a DNS issue?
>
> Do you have any devices in front of your server?
> On 5/22/2019 3:24 AM, Chandran Manikandan wrote:
>
> Hi Eric,
>
> I have checked in logs of above mentioned, its not reaching our server. I
> told sender to check their server administrator if they blocked our server
> IP.
> But they said it was no issue on their side.
> So how do i resolve this?
> The sender side is not supporting us instead the user pushing me to check
> my server.
> I have keep on checked my server logs maillog, smtp,spamdyke, there is no
> domain or ip address or user email.
> Please advise.
>
> On Thu, May 16, 2019 at 9:26 PM Eric's mail 
> wrote:
>
>> Is the email hitting the SMTP server? Check in
>> /var/log/qmail/smtp/current to see if connection is being made. Also check
>> in /var/log/maillog for spamdyke issues.
>>
>> Do you have any devices in front of your mail server?
>>
>> Get Outlook for Android <https://aka.ms/ghei36>
>>
>>
>>
>>
>> On Thu, May 16, 2019 at 5:49 AM -0600, "Chandran Manikandan" <
>> tech2m...@gmail.com> wrote:
>>
>> Hi Folks,
>>>
>>> We are facing one issue with our email server.
>>> Whenever emails sent from sender to our domain it's not getting to our
>>> mailbox.
>>> I have added sender email and domain into my server whitelist_ip,
>>> senders,rdns file in spamdyke folder.
>>>
>>> They are getting below message when they sent to our domain.
>>>
>>> 4.4.2 Bad connection Timed out
>>> 5.7.7 Delivery Expired(Message too old) timeout.
>>>
>>> I am running pdns-recursor service and configured nameserver 127.0.0.1
>>> in /etc/resolv.conf
>>>
>>> I am facing this issue from this sender only.
>>>
>>> Could any one help me.
>>>
>>> --
>>> *Thanks,*
>>> *Manikandan.C*
>>> *System Administrator*
>>>
>>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Attachments are rejected

[Chandran Manikandan]

Hi Folks,

when we tried to send any email with any attachments like pdf,word etc..
it is showing the below message and getting bounce back for all the
attachments emails.
"an error occurred while sending email. the email server responded. your
email was rejected because it contains the
win.exploit.cve_2019_0903-6966169-0 virus.Please check the message and try
again"

I am running Centos 6.7 32 and 64 bit , both the server getting the same
error.
Also clamav latest update not don in our server. i couldn't find the rpm in
our qmailtoaster ftp.

Could anyone help me to sort it out this issue and provide the latest
clamav patch for both the version.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Email is not delivered to our server

[Chandran Manikandan]

Hi Eric,

I have checked in logs of above mentioned, its not reaching our server. I
told sender to check their server administrator if they blocked our server
IP.
But they said it was no issue on their side.
So how do i resolve this?
The sender side is not supporting us instead the user pushing me to check
my server.
I have keep on checked my server logs maillog, smtp,spamdyke, there is no
domain or ip address or user email.
Please advise.

On Thu, May 16, 2019 at 9:26 PM Eric's mail  wrote:

> Is the email hitting the SMTP server? Check in /var/log/qmail/smtp/current
> to see if connection is being made. Also check in /var/log/maillog for
> spamdyke issues.
>
> Do you have any devices in front of your mail server?
>
> Get Outlook for Android <https://aka.ms/ghei36>
>
>
>
>
> On Thu, May 16, 2019 at 5:49 AM -0600, "Chandran Manikandan" <
> tech2m...@gmail.com> wrote:
>
> Hi Folks,
>>
>> We are facing one issue with our email server.
>> Whenever emails sent from sender to our domain it's not getting to our
>> mailbox.
>> I have added sender email and domain into my server whitelist_ip,
>> senders,rdns file in spamdyke folder.
>>
>> They are getting below message when they sent to our domain.
>>
>> 4.4.2 Bad connection Timed out
>> 5.7.7 Delivery Expired(Message too old) timeout.
>>
>> I am running pdns-recursor service and configured nameserver 127.0.0.1 in
>> /etc/resolv.conf
>>
>> I am facing this issue from this sender only.
>>
>> Could any one help me.
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Email is not delivered to our server

[Chandran Manikandan]

Hi Folks,

We are facing one issue with our email server.
Whenever emails sent from sender to our domain it's not getting to our
mailbox.
I have added sender email and domain into my server whitelist_ip,
senders,rdns file in spamdyke folder.

They are getting below message when they sent to our domain.

4.4.2 Bad connection Timed out
5.7.7 Delivery Expired(Message too old) timeout.

I am running pdns-recursor service and configured nameserver 127.0.0.1 in
/etc/resolv.conf

I am facing this issue from this sender only.

Could any one help me.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Third party Antivirus

[Chandran Manikandan]

Hi Folks,

I am running Centos 6, 32 and 64 bit servers with qmailtoaster include the
Clamav product.
I would like to install third party antivirus product to protect my server
machine.
QMT, clamav will affect if i install any third party antivirus.

I am Planning to install TrendMicro Deep security product.

Please help me if any one had the experience.


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Re: Email server migration

[Chandran Manikandan]

Hi Eric,

Thanks for your advice.
Yes, you are right.
It's too big size of the hard disk. It's taking time.
Better i try above your suggestion and steps.
May i know the same process also for new hard disk upgrade with the same
machine.
Basically those folders need to transferred from old hard drive to new hard
drive.
May i said right.

Thanks guys for your help always.

On Wed, Jan 30, 2019 at 10:25 PM Eric Broch  wrote:

> If your method works don't use ours. The only reason I changed was because
> my /home/vpopmail/domains directory was so big took 1 full day to backup
> and 1 full day to restore. I also changed because some of the directories
> changed between QMT on CentOS 5 and QMT on CentOS 7.
> On 1/30/2019 1:48 AM, Chandran Manikandan wrote:
>
> Hi Eric & All,
>
> Thanks for your help.
> Let me try it out and update you.
>
> I have used qt-backup and qt-restore option in my previous migration. it
> was working fine.
> Let me try Eric and Biju steps.
>
>
> On Wed, Jan 30, 2019 at 7:43 AM Eric Broch 
> wrote:
>
>> The linux command, "hostname", with backticks, i.e.,`hostname`, called
>> command substitution, allows output of a command to be stored in another
>> context, in this case the variable 'HOSTNAME'.
>>
>> If I run the command "hostname" (below) at the prompt I get the following:
>>
>> # hostname
>> myhost.mydomain.com
>>
>> If I run the command "HOSTNAME=`hostname`" (below) at the prompt the
>> output is stored in the variable 'HOSTNAME' (another context).
>>
>> # HOSTNAME=`hostname`
>>
>> # echo $HOSTNAME
>> myhost.mydomain.com
>>
>>
>> On 1/29/2019 3:27 PM, Jeff Koch wrote:
>>
>> Remo:
>>
>> Thanks - I never would have thought of that.
>>
>> Jeff
>>
>> On 1/29/2019 5:23 PM, Remo Mattei wrote:
>>
>> The `hostname` is a short hand for $(hostname). It basically reads the
>> hostname.
>>
>> Example:
>> echo $(hostname)
>> qmail.rm.ht
>>
>>
>> On Jan 29, 2019, at 14:20, Jeff Koch  wrote:
>>
>> OK - no problem - on the second question what is supposed to go into
>> HOSTNAME=`hostname` ? Is it 'localhost' or the server's actual host name?
>>
>> Jeff
>>
>>
>> On 1/29/2019 5:17 PM, Eric Broch wrote:
>>
>> That authentication line is for the development
>> <ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/7/development/x86_64/>
>> version of qmail (1.03-3.1) which utilizes the qmail-authentication-0.8.3
>> <https://www.fehcom.de/qmail/smtpauth.html> patch (old patch: 0.5.7). I
>> haven't compiled it yet for the qmail cdb which, I think, you use.
>> On 1/29/2019 8:57 AM, Jeff Koch wrote:
>>
>> Eric - where does that line go? In the
>> /var/qmail/supervise/submission/run file?  I currently have:
>>
>> I just noticed HOSTNAME is not set - what should it be?
>>
>> QMAILDUID=`id -u vpopmail`
>> NOFILESGID=`id -g vpopmail`
>> MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
>> SMTPD="/var/qmail/bin/qmail-smtpd"
>> TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb"
>> HOSTNAME=`hostname`
>> VCHKPW="/home/vpopmail/bin/vchkpw"
>> export REQUIRE_AUTH=1
>>
>> exec /usr/bin/softlimit -m 12800 \
>> /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \
>> -u "$QMAILDUID" -g "$NOFILESGID" 0 587 \
>> $SMTPD $VCHKPW /bin/true 2>&1
>>
>> Jeff
>>
>> On 1/29/2019 10:21 AM, Eric Broch wrote:
>>
>> It has to do with a recent past issue "!+cram" forces encrypted passwords
>> in submission and make sure qmail-queue is not pointing to qmail-dk...it
>> shouldn't be.
>> On 1/29/2019 8:05 AM, Jeff Koch wrote:
>>
>> Hi Eric:
>>
>> Great summary of the tasks but I don't understand item 7 - can you please
>> explain ?
>>
>> Jeff
>>
>> On 1/29/2019 8:29 AM, Eric Broch wrote:
>>
>> Hi Chandran,
>>
>> Here's what I do:
>>
>> 1) Install Qmail according to link update from testing & development as
>> you see fit (https://www.qmailtoaster.org)
>>
>> 2) Dump mysql database on old machine and copy to new machine
>> mysql_file=/home/vpopmail/etc/vpopmail.mysql
>> if [ -f $mysql_file ]; then
>>   mysql_host=`cut -d\| -f1 < $mysql_file`
>>   mysql_port=`cut -d\| -f2 < $mysql_file`
>>   mysql_user=`cut -d\| -f3 < $mysql_file`
>>   mysql_password=`cut -d\| -f4 < $mysql_file`
>>   mysql_database=`cut -d\| -f5 &

Re: [qmailtoaster] Re: Email server migration

[Chandran Manikandan]

Hi Eric & All,

Thanks for your help.
Let me try it out and update you.

I have used qt-backup and qt-restore option in my previous migration. it
was working fine.
Let me try Eric and Biju steps.


On Wed, Jan 30, 2019 at 7:43 AM Eric Broch  wrote:

> The linux command, "hostname", with backticks, i.e.,`hostname`, called
> command substitution, allows output of a command to be stored in another
> context, in this case the variable 'HOSTNAME'.
>
> If I run the command "hostname" (below) at the prompt I get the following:
>
> # hostname
> myhost.mydomain.com
>
> If I run the command "HOSTNAME=`hostname`" (below) at the prompt the
> output is stored in the variable 'HOSTNAME' (another context).
>
> # HOSTNAME=`hostname`
>
> # echo $HOSTNAME
> myhost.mydomain.com
>
>
> On 1/29/2019 3:27 PM, Jeff Koch wrote:
>
> Remo:
>
> Thanks - I never would have thought of that.
>
> Jeff
>
> On 1/29/2019 5:23 PM, Remo Mattei wrote:
>
> The `hostname` is a short hand for $(hostname). It basically reads the
> hostname.
>
> Example:
> echo $(hostname)
> qmail.rm.ht
>
>
> On Jan 29, 2019, at 14:20, Jeff Koch  wrote:
>
> OK - no problem - on the second question what is supposed to go into
> HOSTNAME=`hostname` ? Is it 'localhost' or the server's actual host name?
>
> Jeff
>
>
> On 1/29/2019 5:17 PM, Eric Broch wrote:
>
> That authentication line is for the development
> <ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/7/development/x86_64/>
> version of qmail (1.03-3.1) which utilizes the qmail-authentication-0.8.3
> <https://www.fehcom.de/qmail/smtpauth.html> patch (old patch: 0.5.7). I
> haven't compiled it yet for the qmail cdb which, I think, you use.
> On 1/29/2019 8:57 AM, Jeff Koch wrote:
>
> Eric - where does that line go? In the /var/qmail/supervise/submission/run
> file?  I currently have:
>
> I just noticed HOSTNAME is not set - what should it be?
>
> QMAILDUID=`id -u vpopmail`
> NOFILESGID=`id -g vpopmail`
> MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
> SMTPD="/var/qmail/bin/qmail-smtpd"
> TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb"
> HOSTNAME=`hostname`
> VCHKPW="/home/vpopmail/bin/vchkpw"
> export REQUIRE_AUTH=1
>
> exec /usr/bin/softlimit -m 12800 \
> /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \
> -u "$QMAILDUID" -g "$NOFILESGID" 0 587 \
> $SMTPD $VCHKPW /bin/true 2>&1
>
> Jeff
>
> On 1/29/2019 10:21 AM, Eric Broch wrote:
>
> It has to do with a recent past issue "!+cram" forces encrypted passwords
> in submission and make sure qmail-queue is not pointing to qmail-dk...it
> shouldn't be.
> On 1/29/2019 8:05 AM, Jeff Koch wrote:
>
> Hi Eric:
>
> Great summary of the tasks but I don't understand item 7 - can you please
> explain ?
>
> Jeff
>
> On 1/29/2019 8:29 AM, Eric Broch wrote:
>
> Hi Chandran,
>
> Here's what I do:
>
> 1) Install Qmail according to link update from testing & development as
> you see fit (https://www.qmailtoaster.org)
>
> 2) Dump mysql database on old machine and copy to new machine
> mysql_file=/home/vpopmail/etc/vpopmail.mysql
> if [ -f $mysql_file ]; then
>   mysql_host=`cut -d\| -f1 < $mysql_file`
>   mysql_port=`cut -d\| -f2 < $mysql_file`
>   mysql_user=`cut -d\| -f3 < $mysql_file`
>   mysql_password=`cut -d\| -f4 < $mysql_file`
>   mysql_database=`cut -d\| -f5 < $mysql_file`
> fi
> mysqldump -u $mysql_user -p$mysql_password -h $mysql_host $mysql_portparm
> $mysql_database > ./vpopmail.sql
>
> 3) rsync the following directories old server to new
> server...squirrelmail, spamassassin, tcprules.d if you need them.
> /home/vpopmail/domains
> /var/lib/squirrelmail
> /usr/share/squirrelmail
> /etc/spamassassin/*.cf
> /etc/spamassassin/.spamassassin
> /etc/tcprules.d
> /var/qmail/users
>
> 4) Import mysql database in new machine
> mysql -uroot -p vpopmail < ./vpopmail.sql
>
> 5) Copy any file in /var/qmail/control/ that you want. (usually not
> necessary)
>
> 6) Copy any run setting that you want. (usually not necessary)
>
> 7) Make sure if you use testing and development repos (DomainKeys dropped
> in development) to check run authentication run settings (export
> SMTPAUTH="!+cram")
>
> 8) stop and start qmail
> On 1/28/2019 9:24 PM, Chandran Manikandan wrote:
>
> Hi Biju,
>
> Thanks for your help and steps.
>
> Can i use the qt-backup script to take all the backup in old server?
> Then move this compress file into new server to qt-restore command.
>
> Anyone have an

[qmailtoaster] send and receive error

[Chandran Manikandan]

Hi Folks,

I am running qmailtoaster on COS6 32 bit.

Send and receive error message coming frequently and inbox emails are not
downloading in outlook 2016 of office 365 email client.

But if i restart the dovecot service then start downloading the emails in
inbox then send and receive error message gone.

Outlook 2010 doesn't have the same issue.

Is this server issue? or email client version issues? or if i need to use
standalone outlook product instead office 365?

I do the dovecot service restart every one hour for this issue .

if possible to do the cron job for dovecot service restart for every one
hour daily or any other solution there.

Kindly Any one help me.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Re: Email server migration

[Chandran Manikandan]

Hi Biju,

Thanks for your help and steps.

Can i use the qt-backup script to take all the backup in old server?
Then move this compress file into new server to qt-restore command.

Anyone have any idea about this?

And one more doubt.

Can i use the same procedure for Hard disk upgrade from old hard disk to
new hard disk in the same machine or any other simple step there?

Thanks in advance.


On Fri, Jan 25, 2019 at 6:18 PM Biju Jose  wrote:

> 1. Setup new server
>
> 2. Create a new domain ( vadddomain) and import the MySQL table of that
> domain from the old server.
>
> 3. RSync the mail folder from the old to the new
>
> rsync -arvz -e 'ssh -p 8022' –progress r...@oldserver.com:
> /home/vpopmail/domains/domain1.com/ /home/vpopmail/domains/domain1com
>
> 4. Change the DNS for domain1 to point to the new server.
>
> 5. Repeat for the other domains.
>
>
>
> Best Regards
>
> Biju
>
>
>
>
>
> *From:* Chandran Manikandan [mailto:tech2m...@gmail.com]
> *Sent:* 25 January 2019 15:32
> *To:* qmailtoaster-list@qmailtoaster.com;
> qmailtoaster-list-h...@qmailtoaster.com
> *Subject:* [qmailtoaster] Re: Email server migration
>
>
>
> Hi Friends,
>
>
>
> Could anyone help me the server migration.
>
>
>
> On Thu, Jan 17, 2019 at 11:27 AM Chandran Manikandan 
> wrote:
>
>
> Hi Folks,
>
>
>
> I am planning to migrate email and web server from one machine to another
> machine.
>
>
>
> I have installed qmailtoaster and  web server  on COS6.6 64 bit server
> machine.
>
> And configure 4 domains email accounts, alias and 4 domain web server with
> virtual host.
>
> I have installed letsencrypt self-signed certificate for email and web
> server on COS 6.6.4 machine.
>
>
>
> I am planning to migrate the email and web server with https on COS 7 64
> bit server latest version.
>
> Could any one help me the steps for the new machine.
>
>
>
> 1. COS 7 latest version installation steps
>
>
>
> 2. Qmailtoaster installation steps
>
>
>
> 3. web server installation steps with virtual host
>
>
>
> 4. multiple domain, email accounts,alias migrate to new server(Backup and
> restore)
>
>
>
> 5. multiple domain websites migrate to new server
>
>
>
> Appreciate any one help me.
>
> Thanks in advance
>
>
>
> --
>
> *Thanks,*
>
> *Manikandan.C*
>
> *System Administrator*
>
>
>
>
> --
>
> *Thanks,*
>
> *Manikandan.C*
>
> *System Administrator*
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Re: Email server migration

[Chandran Manikandan]

Hi Friends,

Could anyone help me the server migration.

On Thu, Jan 17, 2019 at 11:27 AM Chandran Manikandan 
wrote:

>
> Hi Folks,
>
> I am planning to migrate email and web server from one machine to another
> machine.
>
> I have installed qmailtoaster and  web server  on COS6.6 64 bit server
> machine.
> And configure 4 domains email accounts, alias and 4 domain web server with
> virtual host.
> I have installed letsencrypt self-signed certificate for email and web
> server on COS 6.6.4 machine.
>
> I am planning to migrate the email and web server with https on COS 7 64
> bit server latest version.
> Could any one help me the steps for the new machine.
>
> 1. COS 7 latest version installation steps
>
> 2. Qmailtoaster installation steps
>
> 3. web server installation steps with virtual host
>
> 4. multiple domain, email accounts,alias migrate to new server(Backup and
> restore)
>
> 5. multiple domain websites migrate to new server
>
> Appreciate any one help me.
> Thanks in advance
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Clamav Latest patch

[Chandran Manikandan]

Thanks Eric.
Will wait for your update.

On Mon, Jan 14, 2019 at 10:35 PM Eric Broch  wrote:

> I want to give it a couple weeks before compiling them to make sure all
> the bugs are gone.
> On 1/13/2019 8:17 PM, Chandran Manikandan wrote:
>
> Hi Folks,
>
> Anyone have the clamav latest patch  0.100.2  for COS 6,7 32 and 64 bit.
> Appreciate your help.
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Email server migration

[Chandran Manikandan]

Hi Folks,

I am planning to migrate email and web server from one machine to another
machine.

I have installed qmailtoaster and  web server  on COS6.6 64 bit server
machine.
And configure 4 domains email accounts, alias and 4 domain web server with
virtual host.
I have installed letsencrypt self-signed certificate for email and web
server on COS 6.6.4 machine.

I am planning to migrate the email and web server with https on COS 7 64
bit server latest version.
Could any one help me the steps for the new machine.

1. COS 7 latest version installation steps

2. Qmailtoaster installation steps

3. web server installation steps with virtual host

4. multiple domain, email accounts,alias migrate to new server(Backup and
restore)

5. multiple domain websites migrate to new server

Appreciate any one help me.
Thanks in advance

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Clamav Latest patch

[Chandran Manikandan]

Hi Folks,

Anyone have the clamav latest patch  0.100.2  for COS 6,7 32 and 64 bit.
Appreciate your help.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] how to renew the certificate

[Chandran Manikandan]

Hi Eric,

Thanks.
I have installed letsencrypt on my COS 6 32 and 64 bit successfully.
It is running fine now.

On Thu, Nov 29, 2018 at 10:16 PM Eric Broch  wrote:

> https://www.qmailtoaster.org/ssl.html
> On 11/29/2018 1:19 AM, Chandran Manikandan wrote:
>
> Hi Friends,
>
> I have installed qmailtoaster on my COS6 32 and 64 bit on 2013 and it was
> expired on 2014.
>
> I am unable to configure the email in our email client outlook and
> thunderbird .
> It is showing your certificate is invalid.
>
> my dovecot config below
>
> auth_cache_size = 32 M
> auth_mechanisms = plain login digest-md5
> first_valid_uid = 89
> listen = *
> log_path = /var/log/dovecot.log
> login_greeting = Dovecot toaster ready.
> namespace {
>   inbox = yes
>   location =
>   prefix = INBOX.
>   separator = .
>   type = private
> }
> passdb {
>   args = cache_key=%u webmail=127.0.0.1
>   driver = vpopmail
> }
> plugin {
>   quota = maildir:ignore=Trash
>   quota_rule = ?:storage=0
> }
> protocols = imap
> service imap-login {
>   service_count = 0
> }
> service pop3-login {
>   service_count = 0
> }
> *ssl_cert =  *ssl_dh_parameters_length = 2048*
> *ssl_key =  userdb {
>   args = cache_key=%u quota_template=quota_rule=*:backend=%q
>   driver = vpopmail
> }
> protocol imap {
>   imap_client_workarounds = delay-newmail
> }
>
> Could anyone help me, how to renew automatically or how do i reconfigure
> the certificate.
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] how to renew the certificate

[Chandran Manikandan]

Hi Friends,

I have installed qmailtoaster on my COS6 32 and 64 bit on 2013 and it was
expired on 2014.

I am unable to configure the email in our email client outlook and
thunderbird .
It is showing your certificate is invalid.

my dovecot config below

auth_cache_size = 32 M
auth_mechanisms = plain login digest-md5
first_valid_uid = 89
listen = *
log_path = /var/log/dovecot.log
login_greeting = Dovecot toaster ready.
namespace {
  inbox = yes
  location =
  prefix = INBOX.
  separator = .
  type = private
}
passdb {
  args = cache_key=%u webmail=127.0.0.1
  driver = vpopmail
}
plugin {
  quota = maildir:ignore=Trash
  quota_rule = ?:storage=0
}
protocols = imap
service imap-login {
  service_count = 0
}
service pop3-login {
  service_count = 0
}
*ssl_cert = 

Re: [qmailtoaster] how to remove ssl encryption

[Chandran Manikandan]

Hi Andreas,

Sorry for the late reply.
All the emails are gone to my spam folder and found this issue now only.

My dovecot conf below FYR.


auth_cache_size = 32 M
auth_mechanisms = plain login digest-md5 cram-md5
first_valid_gid = 89
first_valid_uid = 89
listen = *
log_path = /var/log/dovecot.log
login_greeting = Dovecot toaster ready.
mail_plugins = " quota"
namespace {
  inbox = yes
  location =
  prefix =
  separator = .
  type = private
}
passdb {
  args = cache_key=%u webmail=127.0.0.1
  driver = vpopmail
}
plugin {
  quota = maildir:ignore=Trash
  quota_rule = ?:storage=0
}
protocols = imap pop3
ssl_cert =  wrote:

> Hi Chandran,
>
> dont you think it would be better to repair your dovecot-setup but
> disabling ssl?
> I still have a CentOS6 qmailtoaster with working dovecot and certificate.
> If you send your configuration, we should find the issue.
>
> Andreas
>
> -Ursprüngliche Nachricht-
> Von: ChandranManikandan [mailto:kand...@gmail.com]
> Gesendet: Montag, 12. November 2018 04:39
> An: qmailtoaster-list@qmailtoaster.com;
> qmailtoaster-list-h...@qmailtoaster.com
> Betreff: [qmailtoaster] how to remove ssl encryption
>
> Hi Friends,
>
> Am currently using ssl in dovecot config on centos 6 server.
> The certificate message come always whenever open the outlook client.
> I have tried to install the certificate on the machine but still comes the
> warning message.
> I think may be the issue is dovecot ssl certificate.
>
> Can i use without ssl certificate and how do i reconfigure.
>
> Thanks in advance
>
> --
>
> Thanks & Best Regards,
> Manikandan.C
>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Re: increase the attachment size per user wise

[Chandran Manikandan]

Hi Friends,

Could anyone advise me.

On Thu, Apr 12, 2018 at 3:12 PM, Chandran Manikandan <tech2m...@gmail.com>
wrote:

> Hi Friends,
>
> I am running qmailtoaster in COS 6.7 32 bit System in past 4 years without
> any issue.
>
> Am allowing 7 MB attachment size in databytes file for the domain.
>
> My boss wanted to allow 15 MB attachment size for only senior people whom
> are interact with the clients.
>
> And i have blocked .zip extension in simcontrol file also he needs to
> allow for those people only.
>
> Anyway to do these restriction or permission to particular users wise.
>
> Please help me any one have this situation.
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] increase the attachment size per user wise

[Chandran Manikandan]

Hi Friends,

I am running qmailtoaster in COS 6.7 32 bit System in past 4 years without
any issue.

Am allowing 7 MB attachment size in databytes file for the domain.

My boss wanted to allow 15 MB attachment size for only senior people whom
are interact with the clients.

And i have blocked .zip extension in simcontrol file also he needs to allow
for those people only.

Anyway to do these restriction or permission to particular users wise.

Please help me any one have this situation.


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] ClamAV-0.99.4 CentOS6 and CentOS7

[Chandran Manikandan]

Hi Eric,

Thanks a lot. Its updated successfully with the second link.

My messages log file was increased the file size suddenly into 300GB
yesterday.

Anyone have any idea? Why its happening suddenly.



On Fri, Mar 23, 2018 at 9:00 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:

> Chandran,
>
> Here they are...
>
> Build text:
>
> ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> i386/clamav-0.99.4-3.qt.el6.i686.build.txt
>
> Binary RPM:
>
> ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> i386/clamav-0.99.4-3.qt.el6.i686.rpm
> Source RPM:
>
> ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> SRPMS/clamav-0.99.4-3.qt.src.rpm
>
> Eric
>
>
>
> On 3/23/2018 1:15 AM, Chandran Manikandan wrote:
>
> Hi,
>
> Could you share me the 32 bit rpm or let me know the steps to build for
> update in COS6 32 bit .
>
> Thank you.
>
> On Mon, Mar 19, 2018 at 6:35 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
> wrote:
>
>> Hi,
>>
>> I have informed that was wrong.
>> If your OS is 32bit that you need rpmbuild.
>> I built only 64bit.
>>
>> Thank you.
>> Noriyuki Hayashi
>>
>>
>> On Mon, 19 Mar 2018 16:40:12 +0800
>> Chandran Manikandan <tech2m...@gmail.com> wrote:
>>
>> > Hi,
>> >
>> > I have tried to upgrade above rpm on my COS6 32 bit and its getting
>> error.
>> > Unable to do that.
>> >
>> >  rpm -Uvh clamav-0.99.4-0.cs6qt.src.rpm
>> > warning: clamav-0.99.4-0.cs6qt.src.rpm: Header V4 DSA/SHA1 Signature,
>> key
>> > ID c9b62fc9: NOKEY
>> >1:clamav warning: user wats does not exist - using
>> root
>> > warning: group wats does not exist - using root
>> > ### [100%]
>> >
>> >
>> > On Sun, Mar 11, 2018 at 2:33 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
>> > wrote:
>> >
>> > > Hi Eric and ALL,
>> > >
>> > > I also build src.rpm ans x86_64.
>> > > Please check and use as below.
>> > >
>> > > rpmbuild with CentOS_6.6
>> > > https://wats.gr.jp/downloads/CentOS6/clamav-0.99.4-0.cs6qt.src.rpm
>> > > https://wats.gr.jp/downloads/CentOS6/clamav-0.99.4-0.cs6qt.x86_64.rpm
>> > >
>> > > rpmbuild with CentOS_7.2
>> > > https://wats.gr.jp/downloads/CentOS7/clamav-0.99.4-0.cs7qt.src.rpm
>> > > https://wats.gr.jp/downloads/CentOS7/clamav-0.99.4-0.cs7qt.x86_64.rpm
>> > >
>> > > Thank you.
>> > > Noriyuki Hayashi
>> > >
>> > > /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>> > >
>> > > Telecommunications Association License No. A-18-9191
>> > > Government Resell  License No. 301039703002
>> > >   WATS CO.,LTD.
>> > >   Kawana Bldg, 5F  Kamata
>> > > Ota-ku Tokyo, 144-0052 JAPAN
>> > >Phone 81-50-5830-5940
>> > >  Ext：201 VoiceMailDirect：201*1
>> > >FAX   81-50-5830-5941
>> > > http://wats.gr.jp
>> > >   Mail： wats @ wats.gr.jp
>> > > Please remove the space between @ as double side
>> > >
>> > > Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
>> > >
>> > > /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>> > >
>> > >
>> > > -
>> > > To unsubscribe, e-mail: qmailtoaster-list-unsubscribe@
>> qmailtoaster.com
>> > > For additional commands, e-mail: qmailtoaster-list-help@qmailto
>> aster.com
>> > >
>> > >
>> >
>> >
>> > --
>> > *Thanks,*
>> > *Manikandan.C*
>> > *System Administrator*
>>
>> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>>
>> Telecommunications Association License No. A-18-9191
>> Government Resell  License No. 301039703002
>>   WATS CO.,LTD.
>>   Kawana Bldg, 5F  Kamata
>> Ota-ku Tokyo, 144-0052 JAPAN
>>Phone 81-50-5830-5940
>>  Ext：201 VoiceMailDirect：201*1
>>FAX   81-50-5830-5941
>> http://wats.gr.jp
>>   Mail： wats @ wats.gr.jp
>> Please remove the space between @ as double side
>>
>> Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
>>
>> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>>
>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>>
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] ClamAV-0.99.4 CentOS6 and CentOS7

[Chandran Manikandan]

Hi,

Could you share me the 32 bit rpm or let me know the steps to build for
update in COS6 32 bit .

Thank you.

On Mon, Mar 19, 2018 at 6:35 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
wrote:

> Hi,
>
> I have informed that was wrong.
> If your OS is 32bit that you need rpmbuild.
> I built only 64bit.
>
> Thank you.
> Noriyuki Hayashi
>
>
> On Mon, 19 Mar 2018 16:40:12 +0800
> Chandran Manikandan <tech2m...@gmail.com> wrote:
>
> > Hi,
> >
> > I have tried to upgrade above rpm on my COS6 32 bit and its getting
> error.
> > Unable to do that.
> >
> >  rpm -Uvh clamav-0.99.4-0.cs6qt.src.rpm
> > warning: clamav-0.99.4-0.cs6qt.src.rpm: Header V4 DSA/SHA1 Signature, key
> > ID c9b62fc9: NOKEY
> >1:clamav warning: user wats does not exist - using
> root
> > warning: group wats does not exist - using root
> > ### [100%]
> >
> >
> > On Sun, Mar 11, 2018 at 2:33 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
> > wrote:
> >
> > > Hi Eric and ALL,
> > >
> > > I also build src.rpm ans x86_64.
> > > Please check and use as below.
> > >
> > > rpmbuild with CentOS_6.6
> > > https://wats.gr.jp/downloads/CentOS6/clamav-0.99.4-0.cs6qt.src.rpm
> > > https://wats.gr.jp/downloads/CentOS6/clamav-0.99.4-0.cs6qt.x86_64.rpm
> > >
> > > rpmbuild with CentOS_7.2
> > > https://wats.gr.jp/downloads/CentOS7/clamav-0.99.4-0.cs7qt.src.rpm
> > > https://wats.gr.jp/downloads/CentOS7/clamav-0.99.4-0.cs7qt.x86_64.rpm
> > >
> > > Thank you.
> > > Noriyuki Hayashi
> > >
> > > /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> > >
> > > Telecommunications Association License No. A-18-9191
> > > Government Resell  License No. 301039703002
> > >   WATS CO.,LTD.
> > >   Kawana Bldg, 5F  Kamata
> > > Ota-ku Tokyo, 144-0052 JAPAN
> > >Phone 81-50-5830-5940
> > >  Ext：201 VoiceMailDirect：201*1
> > >FAX   81-50-5830-5941
> > > http://wats.gr.jp
> > >   Mail： wats @ wats.gr.jp
> > > Please remove the space between @ as double side
> > >
> > > Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
> > >
> > > /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> > >
> > >
> > > -
> > > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> > > For additional commands, e-mail: qmailtoaster-list-help@
> qmailtoaster.com
> > >
> > >
> >
> >
> > --
> > *Thanks,*
> > *Manikandan.C*
> > *System Administrator*
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
> Telecommunications Association License No. A-18-9191
> Government Resell  License No. 301039703002
>   WATS CO.,LTD.
>   Kawana Bldg, 5F  Kamata
> Ota-ku Tokyo, 144-0052 JAPAN
>Phone 81-50-5830-5940
>  Ext：201 VoiceMailDirect：201*1
>FAX   81-50-5830-5941
> http://wats.gr.jp
>   Mail： wats @ wats.gr.jp
> Please remove the space between @ as double side
>
> Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] ClamAV-0.99.4 CentOS6 and CentOS7

[Chandran Manikandan]

Hi,

I have tried to upgrade above rpm on my COS6 32 bit and its getting error.
Unable to do that.

 rpm -Uvh clamav-0.99.4-0.cs6qt.src.rpm
warning: clamav-0.99.4-0.cs6qt.src.rpm: Header V4 DSA/SHA1 Signature, key
ID c9b62fc9: NOKEY
   1:clamav warning: user wats does not exist - using root
warning: group wats does not exist - using root
### [100%]


On Sun, Mar 11, 2018 at 2:33 PM, Noriyuki Hayashi 
wrote:

> Hi Eric and ALL,
>
> I also build src.rpm ans x86_64.
> Please check and use as below.
>
> rpmbuild with CentOS_6.6
> https://wats.gr.jp/downloads/CentOS6/clamav-0.99.4-0.cs6qt.src.rpm
> https://wats.gr.jp/downloads/CentOS6/clamav-0.99.4-0.cs6qt.x86_64.rpm
>
> rpmbuild with CentOS_7.2
> https://wats.gr.jp/downloads/CentOS7/clamav-0.99.4-0.cs7qt.src.rpm
> https://wats.gr.jp/downloads/CentOS7/clamav-0.99.4-0.cs7qt.x86_64.rpm
>
> Thank you.
> Noriyuki Hayashi
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
> Telecommunications Association License No. A-18-9191
> Government Resell  License No. 301039703002
>   WATS CO.,LTD.
>   Kawana Bldg, 5F  Kamata
> Ota-ku Tokyo, 144-0052 JAPAN
>Phone 81-50-5830-5940
>  Ext：201 VoiceMailDirect：201*1
>FAX   81-50-5830-5941
> http://wats.gr.jp
>   Mail： wats @ wats.gr.jp
> Please remove the space between @ as double side
>
> Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] qmail upgrade

[Chandran Manikandan]

Hi Eric,

Am currently using COS 6 with domainkeys and tcp file like
that QMAILQUEUE="/var/qmail/bin/simscan"

There is no issue for send and receive.

Do i need to use to update of your above email steps?



On Thu, Feb 1, 2018 at 1:43 PM, Eric Broch  wrote:

> Hello list,
>
> If anyone has upgraded qmail lately, especially those of you who DO NOT
> use domainkeys and those who DO use dkim, remember that an upgrade
> overwrites the qmail binaries (/var/qmail/bin). This could affect
> domainkeys, which you really shouldn't use anymore IMHO, and DKIM signing.
>
> 1) Domainkeys: If you DON'T use domainkeys and you've upgrade you might
> have to unlink qmail-queue from qmail-dk and link (ln -s) it to
> qmail-queue.orig. Another approach is to simply change QMAILQUEUE in
> /etc/tcprules.d/tcp.smtp (below).
>
> QMAILQUEUE="/var/qmail/bin/qmail-queue.orig"
>
>
> 2) DKIM: On upgrade the perl script 'qmail-remote' which calls
> 'qmail-remote.orig', will be overwritten...run the following commands
>
> #   wget -O /var/qmail/bin/qmail-remote https://raw.githubusercontent.
> com/qmtoaster/dkim/master/qmail-remote
>
> # chown root:qmail /var/qmail/bin/qmail-remote
>
> # chmod 777 /var/qmail/bin/qmail-remote
>
> Sorry about the inconvenience.
>
> Comments and suggestions please!
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] This day - ClamAV problem

[Chandran Manikandan]

Hi Havrla,

Update latest clamav. It resolves above issue.

On Sat, Jan 27, 2018 at 12:49 AM, Havrla  wrote:

> "statement"
>
> Problem:
>
> Fri Jan 26 10:01:20 2018 -> 
> /var/qmail/simscan/1516957279.523709.10292/textfile3: Can't open file or 
> directory ERROR
>
> or
>
> Jan 26 11:24:50 tonda clamd: LibClamAV Error: cli_gentempfd: Can't create 
> temporary file 
> /tmp/clamav-4cfa012223685613cbdd51ea20c64a9a.tmp/clamav96c37f51f984623e21bb7af92cbbf08.tmp:
>  Too many open files
>
>
> or
>
> qmail-smtpd: qq soft reject (mail server temporarily rejected message
>
>
> #
>
> ClamAV after baseAntivir update 25.1.2018 -> 26.1.2018
>
> ClamAV not close file descriptor:
>
> more more more
> clamd 160821 171659clamav   26u  REG  253,0   
> 2  672063 /tmp/clamav-6066a4d288b5c900926781c172bc116b.tmp (deleted)
> clamd 160821 171659clamav   27u  REG  253,0  
> 23  672065 /tmp/clamav-b4caea19b543ad25e02fa960a92f0aa2.tmp (deleted)
> clamd 160821 171659clamav   28u  REG  253,0   
> 2  672066 /tmp/clamav-fb78c6f53c4d6a6b8ac253e6621fa3a9.tmp (deleted)
> clamd 160821 171659clamav   29u  REG  253,0  
> 23  672068 /tmp/clamav-a52275713035f14c03d3193879a5a164.tmp (deleted)
> more more more
> [root@tonda clamav]#
>
> Havrla
>
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Update clamav

[Chandran Manikandan]

Hi Eric,

Thank you.
I have updated above your link. but i cannot send and receive email and the
logs showing below.

qmail-smtpd: qq soft reject (mail server temporarily rejected message
(#4.3.0))

Please help me to fix this issue
my server is down now

nobody using email.

On Fri, Jan 26, 2018 at 12:50 PM, Eric Broch <ebr...@whitehorsetc.com>
wrote:

> There is clamav-99.2-3 (x86 and x86_64) on the CentOS 6 mirror:
> ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> SRPMS/clamav-0.99.2-3.qt.src.rpm &
>
> ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> i386/clamav-0.99.2-3.qt.el6.i686.rpm
>
> clamav-99.3 just came out today. I'll get it rolled in the next couple of
> days...most likely tomorrow.
>
> On 1/25/2018 9:29 PM, Chandran Manikandan wrote:
>
> Dear Friends,
>
> Clamav is running outdated version in my system when i run the freshclam
> today with the below message.
>
> ClamAV update process started at Fri Jan 26 12:24:24 2018
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.99.1 Recommended version: 0.99.3
> DON'T PANIC! Read http://www.clamav.net/documents/upgrading-clamav
>
>
> I am using qmailtoaster in CentOS release 6.7 (Final) 32 bit  in one
> machine and another machine is CentOS release 6.7 (Final) 64 bit.
>
> Kindly help me to provide the procedure without affect our existing
> packages.
>
> Both the server is production server.
>
> Appreciate your help.
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Update clamav

[Chandran Manikandan]

Dear Friends,

Clamav is running outdated version in my system when i run the freshclam
today with the below message.

ClamAV update process started at Fri Jan 26 12:24:24 2018
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99.1 Recommended version: 0.99.3
DON'T PANIC! Read http://www.clamav.net/documents/upgrading-clamav


I am using qmailtoaster in CentOS release 6.7 (Final) 32 bit  in one
machine and another machine is CentOS release 6.7 (Final) 64 bit.

Kindly help me to provide the procedure without affect our existing
packages.

Both the server is production server.

Appreciate your help.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to increase email attachment size

[Chandran Manikandan]

Hi Friends,

Yes, i want per user control.

Hi Tony,

Could you give me the command for vmoduser per user control.



On Tue, Dec 12, 2017 at 11:23 PM, Tony White <t...@ycs.com.au> wrote:

> The only thing vmoduser seems to allow is to disengage domain limits
> for a given user.
>
> best wishes
>   Tony White
>
> On 13/12/2017 02:02, Remo Mattei wrote:
>
> You have to set that manually and try like vmoduser for those people.
>
> Remo
>
> Il giorno 12 dic 2017, alle ore 06:57, Tony White < <t...@ycs.com.au>
> t...@ycs.com.au> ha scritto:
>
> You are correct Eric.
> Read to quickly.
>
> If it was me I would have two vm servers
> one for business and one for everyone else.
>
>
>
> best wishes
>   Tony White
>
> On 13/12/2017 01:19, Eric Broch wrote:
>
> Tony,
>
> I think he wanted per user control. That's a global control.
>
> Eric
>
> On 12/12/2017 7:12 AM, Tony White wrote:
>
> In the /var/qmail/control folder edit the
> databytes file to match the require
> attachment size ie 1000 is ~10MB.
>
> Dont forget to adjust your php setup to match
> or squirrelmail etc will only allow the size in php.ini
>
> best wishes
>   Tony White
>
> On 13/12/2017 00:55, Eric Broch wrote:
>
> Chandran,
>
> I don't think per user attachment size control is possible. If someone
> knows for sure please let us know.
>
> Eric
>
> On 12/12/2017 1:04 AM, Chandran Manikandan wrote:
>
> Dear Friends,
>
> I am using Qmailtoaster on centos 6.5 machine and currently having 200
> email accounts.
>
> I want to increase email attachment size like 20 MB for particular email
> account only like Business and management people.
>
> Currently provided only 7 MB in databytes file.
>
> If possible to provide 20 MB in webmail for those accounts only.
>
> Thanks in advance.
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to increase email attachment size

[Chandran Manikandan]

Dear Friends,

I am using Qmailtoaster on centos 6.5 machine and currently having 200
email accounts.

I want to increase email attachment size like 20 MB for particular email
account only like Business and management people.

Currently provided only 7 MB in databytes file.

If possible to provide 20 MB in webmail for those accounts only.

Thanks in advance.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Missing domain

[Chandran Manikandan]

Hi Tony,

Try to do qt-backup or qtp-backup for backup and qt-restore or qtp-restore
for full backup.

But make sure before you had email backup from any email client like
outlook or thunderbird.

If anything missing then you can restore from pst.


On Tue, Nov 21, 2017 at 9:10 PM, Eric Broch  wrote:

> Tony,
>
> I really can't say for sure, but if this were my production server I'd do
> almost anything to get it backup up and running.
>
> Eric
>
>
>
> On 11/21/2017 3:25 AM, Tony White wrote:
>
>> Hi Eric,
>>   Will a full backup and restore work with a CentOS6 server please?
>>
>> TIA...
>>
>> best wishes
>>   Tony White
>>
>> On 21/11/2017 01:39, Eric Broch wrote:
>>
>> Hmmm...
>>>
>>> not sure how a domain would be removed from assign db on a php upgrade,
>>> but did you rebuild the assign db (the cdb file)?
>>>
>>> # qmailctl stop
>>>
>>> # qmailctl cdb
>>>
>>> # qmailctl start
>>>
>>>
>>>
>>> On 11/20/2017 7:12 AM, Tony White wrote:
>>>
 Hi Eric,

 1) What OS?
 COS 5.11

 2) Is this happening through squirrelmail, or other clients?
 Squirrelmail and pop3

 3) Is this an IMAP issue or also a submission issue
 It seesm to be across the board.

 4) What errors are you getting and where (logs and programs)?
 No errors, not even vqadmin sees the domain.
 I have a Your email address is blacklisted.

 5) Have you looked at your log files for dovecot '/var/log/dovecot.log',
 for Courier I'm not sure where it goes.


 6) I think (can't remember off the top of my head) for authentication
 the domain must be in the mysql db, vpopmail directory, and
 /var/qmail/users/assign

 Wow had forgotten that one and yes it was not in there. Added it now
 but now I am getting errors.
 Now vqadmin sees the domain but it cannot find users. All directories
 are present.

 FYI - I am backing up using qtp-backup then going to restore to a vm
 that is the last backup we have using qtp-restore.

 Thank Eric, any more tips ideas gratefully accepted.

 best wishes
   Tony White

 On 21/11/2017 00:38, Eric Broch wrote:

 Some questions:
>
> 1) What OS?
>
> 2) Is this happening through squirrelmail, or other clients?
>
> 3) Is this an IMAP issue or also a submission issue
>
> 4) What errors are you getting and where (logs and programs)?
>
> 5) Have you looked at your log files for dovecot
> '/var/log/dovecot.log',
> for Courier I'm not sure where it goes.
>
> 6) I think (can't remember off the top of my head) for authentication
> the domain must be in the mysql db, vpopmail directory, and
> /var/qmail/users/assign
>
> Eric
>
>
>
> On 11/20/2017 12:32 AM, Tony White wrote:
>
>> Hi folks,
>>   I am at a loss with this issue and hope someone has seen it before
>> and can illuminate my life for me.
>>   A recent php upgrade failed and I had to reinstall php from the
>> ground up. After all said an done we are missing a single domain
>> and it is in the mysql database, it is in the vpopmail directory but
>> noone can login on that domain. All other domains are intact and
>> operational.
>>
>> TIA
>>
>>
>

 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-help@qmailto
 aster.com


>>>
>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Clamav update 0.99.2

[Chandran Manikandan]

Hi Eric,

I have updated successfully on 32 bit and updates are up to date.

But 64 bit showing the same above message.
Do i did anything wrong.

Please help me how to fix this.

On Mon, Nov 20, 2017 at 4:08 PM, Chandran Manikandan <tech2m...@gmail.com>
wrote:

> Hi Eric,
>
> Thank you,
> I have updated of your above instructions. But i have got the same message
> after updated the patch.
>
> Please check that below and why its still showing outdated.
>
> FYR.
>
> [root@mail ~]# rpm -qa clamav
> clamav-0.99.2-3.qt.el6.x86_64
>
> [root@mail ~]# freshclam
> ClamAV update process started at Mon Nov 20 16:08:05 2017
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.99.1 Recommended version: 0.99.2
> DON'T PANIC! Read http://www.clamav.net/documents/upgrading-clamav
> main.cld is up to date (version: 58, sigs: 4566249, f-level: 60, builder:
> sigmgr)
> daily.cvd is up to date (version: 24056, sigs: 1784794, f-level: 63,
> builder: neo)
> bytecode.cld is up to date (version: 318, sigs: 75, f-level: 63, builder:
> raynman)
>
>
>
>
> On Mon, Nov 20, 2017 at 1:24 PM, Eric Broch <ebr...@whitehorsetc.com>
> wrote:
>
>> Chandran,
>>
>> x86_64: ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/x86
>> _64/clamav-0.99.2-3.qt.el6.x86_64.rpm
>>
>> SRPMS: ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/SRP
>> MS/clamav-0.99.2-3.qt.src.rpm
>>
>> # rpm -Uvh https://raw.githubusercontent.com/qmtoaster/cos6/master/qmt-
>> release-1-4.qt.el6.noarch.rpm
>>
>> # yum update clamav
>>
>> i386 is not in qmt repo yet, maybe tomorrow.
>>
>> Eric
>>
>> On 11/19/2017 9:41 PM, Chandran Manikandan wrote:
>>
>> Dear Friends,
>>
>> Clamav is running outdated version in my system when i run the freshclam
>> today with the below message.
>>
>> ClamAV update process started at Mon Nov 20 12:35:17 2017
>> WARNING: Your ClamAV installation is OUTDATED!
>> WARNING: Local version: 0.99 Recommended version: 0.99.2
>> DON'T PANIC! Read http://www.clamav.net/support/faq
>> main.cvd is up to date (version: 58, sigs: 4566249, f-level: 60, builder:
>> sigmgr)
>> daily.cld is up to date (version: 24056, sigs: 1784794, f-level: 63,
>> builder: neo)
>> bytecode.cld is up to date (version: 318, sigs: 75, f-level: 63, builder:
>> raynman)
>>
>> I am using qmailtoaster in CentOS release 6.7 (Final) 32 bit  in one
>> machine and another machine is CentOS release 6.7 (Final) 64 bit.
>>
>> Kindly help me to provide the procedure without affect our existing
>> packages.
>>
>> Both the server is production server.
>>
>> Appreciate your help.
>>
>>
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>>
>>
>> --
>> Eric Broch
>> White Horse Technical Consulting (WHTC)
>>
>>
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Clamav update 0.99.2

[Chandran Manikandan]

Hi Eric,

Thank you,
I have updated of your above instructions. But i have got the same message
after updated the patch.

Please check that below and why its still showing outdated.

FYR.

[root@mail ~]# rpm -qa clamav
clamav-0.99.2-3.qt.el6.x86_64

[root@mail ~]# freshclam
ClamAV update process started at Mon Nov 20 16:08:05 2017
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99.1 Recommended version: 0.99.2
DON'T PANIC! Read http://www.clamav.net/documents/upgrading-clamav
main.cld is up to date (version: 58, sigs: 4566249, f-level: 60, builder:
sigmgr)
daily.cvd is up to date (version: 24056, sigs: 1784794, f-level: 63,
builder: neo)
bytecode.cld is up to date (version: 318, sigs: 75, f-level: 63, builder:
raynman)




On Mon, Nov 20, 2017 at 1:24 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:

> Chandran,
>
> x86_64: ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> x86_64/clamav-0.99.2-3.qt.el6.x86_64.rpm
>
> SRPMS: ftp://ftp.qmailtoaster.com/pub/repo/qmt/CentOS/6/current/
> SRPMS/clamav-0.99.2-3.qt.src.rpm
>
> # rpm -Uvh https://raw.githubusercontent.com/qmtoaster/cos6/master/qmt-
> release-1-4.qt.el6.noarch.rpm
>
> # yum update clamav
>
> i386 is not in qmt repo yet, maybe tomorrow.
>
> Eric
>
> On 11/19/2017 9:41 PM, Chandran Manikandan wrote:
>
> Dear Friends,
>
> Clamav is running outdated version in my system when i run the freshclam
> today with the below message.
>
> ClamAV update process started at Mon Nov 20 12:35:17 2017
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.99 Recommended version: 0.99.2
> DON'T PANIC! Read http://www.clamav.net/support/faq
> main.cvd is up to date (version: 58, sigs: 4566249, f-level: 60, builder:
> sigmgr)
> daily.cld is up to date (version: 24056, sigs: 1784794, f-level: 63,
> builder: neo)
> bytecode.cld is up to date (version: 318, sigs: 75, f-level: 63, builder:
> raynman)
>
> I am using qmailtoaster in CentOS release 6.7 (Final) 32 bit  in one
> machine and another machine is CentOS release 6.7 (Final) 64 bit.
>
> Kindly help me to provide the procedure without affect our existing
> packages.
>
> Both the server is production server.
>
> Appreciate your help.
>
>
>
> --
> *Thanks,*
> *Manikandan.C*
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Clamav update 0.99.2

[Chandran Manikandan]

Dear Friends,

Clamav is running outdated version in my system when i run the freshclam
today with the below message.

ClamAV update process started at Mon Nov 20 12:35:17 2017
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99 Recommended version: 0.99.2
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd is up to date (version: 58, sigs: 4566249, f-level: 60, builder:
sigmgr)
daily.cld is up to date (version: 24056, sigs: 1784794, f-level: 63,
builder: neo)
bytecode.cld is up to date (version: 318, sigs: 75, f-level: 63, builder:
raynman)

I am using qmailtoaster in CentOS release 6.7 (Final) 32 bit  in one
machine and another machine is CentOS release 6.7 (Final) 64 bit.

Kindly help me to provide the procedure without affect our existing
packages.

Both the server is production server.

Appreciate your help.



-- 
*Thanks,*
*Manikandan.C*

Re: [qmailtoaster] Fwd: Automatic backup for all email accounts

[Chandran Manikandan]

Hi Nori,

Thanks for your comments.

Usually i do qt-backup command for backups.

But my requirement is need to take live backup all the emails into another
server without loss any emails.



On Fri, Jun 23, 2017 at 7:09 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
wrote:

> Hi,
>
> For the backup that is like migration.
> You can use rsync & lsyncd will perfect backup.
>
> Regards,
> Nori
>
>
> On Fri, 23 Jun 2017 18:58:53 +0800
> Chandran Manikandan <tech2m...@gmail.com> wrote:
>
> > Hi Friends,
> >
> > I am running Qmailtoaster in centos 6.6 server with 150 email accounts.
> > All the email accounts are configured in mobile and desktop in IMAP type.
> > I am worried for the email if any removed all the emails from his inbox
> > using their email client(Outlook or any mobile client)
> >
> > In this scenario, how to take a backup all the email accounts separately.
> >
> > At present i have configured all the email accounts in Outlook in spare
> > system and took the backup monthly in pst format.
> >
> > It is killing my time for all the day.
> >
> > I have hosted another domain in third party vendor with email hosting and
> > advanced email backup.
> >
> > They have provided two separate control panel logins.
> > One control panel provided to create new email account and check the size
> > etc.
> > Another control panel provided to configure those email account in IMAP
> > type.
> > Once configured those email account in this control panel, it is showing
> > the backup process completed message in backup status.
> > There is one option to download those email account in PST format to any
> > system.
> >
> > So i would like to make a same scenario in our office which is our
> another
> > domain hosted in our server.
> >
> > Anyone have the experience  . Could you help me to provide the solution.
> >
> >
> >
> > --
> > *Thanks,*
> > *Manikandan.C*
> > *System Administrator*
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
> Telecommunications Association License No. A-18-9191
> Government Resell  License No. 301039703002
>   WATS CO.,LTD.
>   Kawana Bldg, 5F  Kamata
> Ota-ku Tokyo, 144-0052 JAPAN
>Phone 81-50-5830-5940
>  Ext：201 VoiceMailDirect：201*1
>FAX   81-50-5830-5941
> http://wats.gr.jp
>   Mail： wats @ wats.gr.jp
> Please remove the space between @ as double side
>
> Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Fwd: Automatic backup for all email accounts

[Chandran Manikandan]

Hi Friends,

I am running Qmailtoaster in centos 6.6 server with 150 email accounts.
All the email accounts are configured in mobile and desktop in IMAP type.
I am worried for the email if any removed all the emails from his inbox
using their email client(Outlook or any mobile client)

In this scenario, how to take a backup all the email accounts separately.

At present i have configured all the email accounts in Outlook in spare
system and took the backup monthly in pst format.

It is killing my time for all the day.

I have hosted another domain in third party vendor with email hosting and
advanced email backup.

They have provided two separate control panel logins.
One control panel provided to create new email account and check the size
etc.
Another control panel provided to configure those email account in IMAP
type.
Once configured those email account in this control panel, it is showing
the backup process completed message in backup status.
There is one option to download those email account in PST format to any
system.

So i would like to make a same scenario in our office which is our another
domain hosted in our server.

Anyone have the experience  . Could you help me to provide the solution.



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Unable to receive email from particular domain

[Chandran Manikandan]

Hi Eric,

Thank you for your help.

I have disabled bind and do the below steps. now it's working.

# yum install pdns-recursor

# service pdns-recursor start

# chkconfig pdns-recursor on

Then change /etc/resolv.conf to be:

nameserver 127.0.0.1
nameserver  myispa dns

then run queue_repair.py -r all the queued emails are delivered and new
emails are delivered.



On Thu, Apr 27, 2017 at 11:37 AM, Eric Broch <ebr...@whitehorsetc.com>
wrote:

> Can you change your DNS server?
> Try 127.0.0.1 and see what Bind's query returns.
>
>
> On 4/26/2017 8:28 PM, Chandran Manikandan wrote:
>
> Hi Eric,
>
> Thank you for your reply.
>
> Centos 6.7 (Final) OS running my machine.
>
> I think i have run Bind server and my cat /etc/resolv.conf below.
>
> search mydomain.com
>
> nameserver xxx.xxx.xxx.xxx
> nameserver xxx.xxx.xxx.xxx
>
> My domain name and my ISP DNS.
>
>
>
> On Wed, Apr 26, 2017 at 10:41 PM, Eric Broch <ebr...@whitehorsetc.com>
> wrote:
>
>> Hi Chandran,
>>
>> What OS are you running and what resolver? Also what's in
>> /etc/resolv.conf?
>>
>> Eric
>>
>> On 4/25/2017 10:33 PM, Chandran Manikandan wrote:
>>
>> Hi Friends,
>>
>>
>> I am able to receive email from .com domain, but unable to send an
>> email to the same domain.
>> All the emails are in queue.
>>
>> I have investigated this issue in my server logs and showing below
>>
>> @400059002226076d2174 delivery 282: deferral:CNAME_lookup_failed_t
>> emporarily._(#4.4.3)/
>> @400059002226076d3ccc status: local 0/10 remote 0/20
>> @400059002239266b0f64 warning: unable to open todo/53805058
>>
>> Both the server is running in internal network with the same qmailtoaster
>> configuration.
>>
>> Both the domain able to send an email to other external domains without
>> any issue.
>>
>> Anyone help me to resolve this.
>>
>> I have googled this issue, but no luck to fix this.
>>
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>>
>> --
>> Eric Broch
>> White Horse Technical Consulting (WHTC)
>>
>>
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: Re[2]: [qmailtoaster] Help for email send

[Chandran Manikandan]

Hi Friends,

Thank you for your help.

I have disabled bind and do the below steps. now it's working.

# yum install pdns-recursor

# service pdns-recursor start

# chkconfig pdns-recursor on

Then change /etc/resolv.conf to be:

nameserver 127.0.0.1
nameserver  myispa dns

then run queue_repair.py -r all the queued emails are delivered and new
emails are delivered.

On Wed, Apr 26, 2017 at 6:57 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
wrote:

> Hi,
>
> You can check as below.
> 1. Do you have cache name server?
> 2. Check /etc/resolve.conf
> 3. Check run the dnsmasq ?
> If you do not have cache name server that you need run dnsmasq for cache
> named server I guess.
>
> Kind regards,
> Nori
>
>
> On Wed, 26 Apr 2017 14:05:58 +0800
> Chandran Manikandan <tech2m...@gmail.com> wrote:
>
> > Hi Lodok,
> >
> > I have tried your command on our server, It is showing no MX records
> found.
> >
> > Actually i have run the email server in our office in house and DNS
> hosting
> > on third party.
> >
> > How do i fix this issue
> >
> > Could you help me.
> >
> > Thank you.
> >
> > On Wed, Apr 26, 2017 at 1:49 PM, Andreas Galatis <a...@unet.de> wrote:
> >
> > > Hi,
> > >
> > > try: dig MX .com
> > >
> > > Qmail tells you in the log that it is not able to find the MX fort hat
> > > domain.
> > >
> > >
> > >
> > > Iodok
> > >
> > >
> > >
> > > *Von:* Chandran Manikandan [mailto:tech2m...@gmail.com]
> > > *Gesendet:* Mittwoch, 26. April 2017 06:40
> > > *An:* ebr...@whitehorsetc.com; qmailtoaster-list@qmailtoaster.com
> > > *Betreff:* [qmailtoaster] Help for email send
> > >
> > >
> > >
> > > Hi Eric and Friends,
> > >
> > >
> > > I am able to receive email from .com domain, but unable to send an
> > > email to the same domain.
> > > All the emails are in queue.
> > >
> > > I have investigated this issue in my server logs and showing below
> > >
> > > @400059002226076d2174 delivery 282:
> > > deferral:CNAME_lookup_failed_temporarily._(#4.4.3)/
> > > @400059002226076d3ccc status: local 0/10 remote 0/20
> > > @400059002239266b0f64 warning: unable to open todo/53805058
> > >
> > > Both the server is running in internal network with the same
> qmailtoaster
> > > configuration.
> > >
> > > Both the domain able to send an email to other external domains
> without any
> > > issue.
> > >
> > > Anyone help me to resolve this.
> > >
> > > I have googled this issue, but no luck to fix this.
> > >
> > >
> > >
> > > --
> > >
> > > *Thanks,*
> > >
> > > *Manikandan.C*
> > >
> > > *System Administrator*
> > >
> >
> >
> >
> > --
> > *Thanks,*
> > *Manikandan.C*
> > *System Administrator*
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
> Telecommunications Association License No. A-18-9191
> Government Resell  License No. 301039703002
>   WATS CO.,LTD.
>   Kawana Bldg, 5F  Kamata
> Ota-ku Tokyo, 144-0052 JAPAN
>Phone 81-50-5830-5940
>  Ext：201 VoiceMailDirect：201*1
>FAX   81-50-5830-5941
> http://wats.gr.jp
>   Mail： wats @ wats.gr.jp
> Please remove the space between @ as double side
>
> Key fingerprint = B53D FF2F BFEA FDA8 1439  38AA 8281 9A3E C9B6 2FC9
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Unable to receive email from particular domain

[Chandran Manikandan]

Hi Eric,

Thank you for your reply.

Centos 6.7 (Final) OS running my machine.

I think i have run Bind server and my cat /etc/resolv.conf below.

search mydomain.com

nameserver xxx.xxx.xxx.xxx
nameserver xxx.xxx.xxx.xxx

My domain name and my ISP DNS.



On Wed, Apr 26, 2017 at 10:41 PM, Eric Broch <ebr...@whitehorsetc.com>
wrote:

> Hi Chandran,
>
> What OS are you running and what resolver? Also what's in /etc/resolv.conf?
>
> Eric
>
> On 4/25/2017 10:33 PM, Chandran Manikandan wrote:
>
> Hi Friends,
>
>
> I am able to receive email from .com domain, but unable to send an
> email to the same domain.
> All the emails are in queue.
>
> I have investigated this issue in my server logs and showing below
>
> @400059002226076d2174 delivery 282: deferral:CNAME_lookup_failed_
> temporarily._(#4.4.3)/
> @400059002226076d3ccc status: local 0/10 remote 0/20
> @400059002239266b0f64 warning: unable to open todo/53805058
>
> Both the server is running in internal network with the same qmailtoaster
> configuration.
>
> Both the domain able to send an email to other external domains without
> any issue.
>
> Anyone help me to resolve this.
>
> I have googled this issue, but no luck to fix this.
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> --
> Eric Broch
> White Horse Technical Consulting (WHTC)
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Help for email send

[Chandran Manikandan]

Hi Lodok,

I have tried your command on our server, It is showing no MX records found.

Actually i have run the email server in our office in house and DNS hosting
on third party.

How do i fix this issue

Could you help me.

Thank you.

On Wed, Apr 26, 2017 at 1:49 PM, Andreas Galatis <a...@unet.de> wrote:

> Hi,
>
> try: dig MX .com
>
> Qmail tells you in the log that it is not able to find the MX fort hat
> domain.
>
>
>
> Iodok
>
>
>
> *Von:* Chandran Manikandan [mailto:tech2m...@gmail.com]
> *Gesendet:* Mittwoch, 26. April 2017 06:40
> *An:* ebr...@whitehorsetc.com; qmailtoaster-list@qmailtoaster.com
> *Betreff:* [qmailtoaster] Help for email send
>
>
>
> Hi Eric and Friends,
>
>
> I am able to receive email from .com domain, but unable to send an
> email to the same domain.
> All the emails are in queue.
>
> I have investigated this issue in my server logs and showing below
>
> @400059002226076d2174 delivery 282:
> deferral:CNAME_lookup_failed_temporarily._(#4.4.3)/
> @400059002226076d3ccc status: local 0/10 remote 0/20
> @400059002239266b0f64 warning: unable to open todo/53805058
>
> Both the server is running in internal network with the same qmailtoaster
> configuration.
>
> Both the domain able to send an email to other external domains without any
> issue.
>
> Anyone help me to resolve this.
>
> I have googled this issue, but no luck to fix this.
>
>
>
> --
>
> *Thanks,*
>
> *Manikandan.C*
>
> *System Administrator*
>



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Help for email send

[Chandran Manikandan]

Hi Eric and Friends,


I am able to receive email from .com domain, but unable to send an
email to the same domain.
All the emails are in queue.

I have investigated this issue in my server logs and showing below

@400059002226076d2174 delivery 282:
deferral:CNAME_lookup_failed_temporarily._(#4.4.3)/
@400059002226076d3ccc status: local 0/10 remote 0/20
@400059002239266b0f64 warning: unable to open todo/53805058

Both the server is running in internal network with the same qmailtoaster
configuration.

Both the domain able to send an email to other external domains without any
issue.

Anyone help me to resolve this.

I have googled this issue, but no luck to fix this.


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Fwd: qmail-1.03-3 CentOS 7

[Chandran Manikandan]

Hi Eric,

Noted and Thank you.

On Thu, Apr 20, 2017 at 3:03 PM, Eric Broch  wrote:

> A link is also included on the main website qmailtoaster.com and
> qmailtoaster.org
>
> On 4/20/2017 1:01 AM, Eric Broch wrote:
>
>Qmail-1.03-3  
> is ready for testing (20 APR 2017). Available in the repository upon 
> completion. It includes,
>1) The latest  Qmail-TLS patch from 
> Frederik Vermeulen's Qmail-TLS site .
>2) Secure SMTP (Port 465) available by default.
>3) 2048 bit RSA keys and DH params (default).
>4) This patch fixes the STARTTLS plaintext command injection 
> vulnerability. Here .
>*Thanks to Frederik Vermeulen and others who made these fixes and features 
> available to the Qmail community.
>
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Unable to receive email from particular domain

[Chandran Manikandan]

Hi Friends,


I am able to receive email from .com domain, but unable to send an
email to the same domain.
All the emails are in queue.

I have investigated this issue in my server logs and showing below

@400059002226076d2174 delivery 282:
deferral:CNAME_lookup_failed_temporarily._(#4.4.3)/
@400059002226076d3ccc status: local 0/10 remote 0/20
@400059002239266b0f64 warning: unable to open todo/53805058

Both the server is running in internal network with the same qmailtoaster
configuration.

Both the domain able to send an email to other external domains without any
issue.

Anyone help me to resolve this.

I have googled this issue, but no luck to fix this.


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Fetchmail install and configure on qmailtoaster system

[Chandran Manikandan]

Dear Friends,

I have running qmailtoaster in centos 6.6 system and kept in datacenter.

I am planning to keep one more server in our office with the same domain.
All the emails want to store both server with the same domain .
Is it possible to do fetchmail installation in my local office server to
configure the same domain with the email accounts.
Anyone have the experience.
Could you help me to provide the installation and configuration steps.
-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Incremental Email backup with single click

[Chandran Manikandan]

Hi Friends,

I would like to get help from you regarding Email backup.

I have seen in internet many of providers provide Auto incremental Email
backup with single click.
They are providing  backup and restore option with single click.

But  i am doing the backup in server manually or cron jobs which is qmail
format.

How they are doing this service and what are the packages supported in
linux.
Do we have any package or software.
Any one have the experience.
Could any one help me to guide me.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Clamav Latest update

[Chandran Manikandan]

Hi Eric,
I have tried your below steps but no luck to work out.
Still did not updated latest package.
if i run the freshclam command still shown outdated message.

On Mon, Sep 19, 2016 at 8:54 PM, Eric <ebr...@whitehorsetc.com> wrote:

> what about...
>
> # wget ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/current/x86
> _64/clamav-0.99.2-2.qt.el6.x86_64.rpm
> # rpm -Uvh clamav-0.99.2-2.qt.el6.x86_64.rpm
>
> or
>
> # wget ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/current/noa
> rch/whtc-qmt-1-1.qt.el6.noarch.rpm
> # rpm -ivh whtc-qmt-1-1.qt.el6.noarch.rpm
> # yum update clamav
>
>
> On 9/19/2016 3:48 AM, Chandran Manikandan wrote:
>
>> Hi Eric,
>> Thanks for your help,
>> I have tried to install the new package in Centos 6. both 32 and 64 bit
>> but below error come.
>> I couldn't install it. could you help me.
>>
>> i have downloaded rpm file and use this command to installed it.
>> command : rpmbuild --rebuild clamav-0.99.2-2.qt.el6.x86_64.rpm
>>
>> error:
>>
>> error: source package expected, binary found
>> error: clamav-0.99.2-2.qt.el6.x86_64.rpm cannot be installed
>>
>>
>>
>> On Wed, Aug 31, 2016 at 1:15 PM, Eric <ebr...@whitehorsetc.com
>> <mailto:ebr...@whitehorsetc.com>> wrote:
>>
>> Hi Chandran,
>>
>> CentOS 6:
>> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/current/x86
>> _64/clamav-0.99.2-2.qt.el6.x86_64.rpm
>> <ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/current/x8
>> 6_64/clamav-0.99.2-2.qt.el6.x86_64.rpm>
>>
>> CentOS 7:
>> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/current/x86
>> _64/clamav-0.99.2-3.qt.el7.x86_64.rpm
>> <ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/current/x8
>> 6_64/clamav-0.99.2-3.qt.el7.x86_64.rpm>
>>
>> Eric
>>
>> On 8/30/2016 10:32 PM, Chandran Manikandan wrote:
>>
>> Hi Friends,
>>
>> Could anyone tried to update clamav qt toaster package.
>>
>> My clamav is outdated message shown below.
>>
>> WARNING: Your ClamAV installation is OUTDATED!
>> WARNING: Local version: 0.99.1 Recommended version: 0.99.2
>>
>> Am running qmailtoaster .qt packages.
>>
>> Could anyone help me to provide me the support.
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>>
>> -
>> To unsubscribe, e-mail:
>> qmailtoaster-list-unsubscr...@qmailtoaster.com
>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
>> For additional commands, e-mail:
>> qmailtoaster-list-h...@qmailtoaster.com
>> <mailto:qmailtoaster-list-h...@qmailtoaster.com>
>>
>>
>>
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Clamav Latest update

[Chandran Manikandan]

Hi Eric,
Thanks for your help,
I have tried to install the new package in Centos 6. both 32 and 64 bit but
below error come.
I couldn't install it. could you help me.

i have downloaded rpm file and use this command to installed it.
command : rpmbuild --rebuild clamav-0.99.2-2.qt.el6.x86_64.rpm

error:

error: source package expected, binary found
error: clamav-0.99.2-2.qt.el6.x86_64.rpm cannot be installed



On Wed, Aug 31, 2016 at 1:15 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Hi Chandran,
>
> CentOS 6: ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/current/x86
> _64/clamav-0.99.2-2.qt.el6.x86_64.rpm
>
> CentOS 7: ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/current/x86
> _64/clamav-0.99.2-3.qt.el7.x86_64.rpm
>
> Eric
>
> On 8/30/2016 10:32 PM, Chandran Manikandan wrote:
>
>> Hi Friends,
>>
>> Could anyone tried to update clamav qt toaster package.
>>
>> My clamav is outdated message shown below.
>>
>> WARNING: Your ClamAV installation is OUTDATED!
>> WARNING: Local version: 0.99.1 Recommended version: 0.99.2
>>
>> Am running qmailtoaster .qt packages.
>>
>> Could anyone help me to provide me the support.
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Clamav Latest update

[Chandran Manikandan]

Hi Friends,

Could anyone tried to update clamav qt toaster package.

My clamav is outdated message shown below.

WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99.1 Recommended version: 0.99.2

Am running qmailtoaster .qt packages.

Could anyone help me to provide me the support.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to make mirror all the emails with all the mailbox in another server or storage

[Chandran Manikandan]

Hi Carl,
Thank you for your support.
Is it work out for fetchmail concept for my queries.
If yes, could any one have the experience kindly help me.
How do i install and configure.
Thank you.

On Mon, Jul 25, 2016 at 8:34 PM, CarlC Internet Services Service Desk <
ab...@carlc.com> wrote:

> *>*In this case, What i am thinking, Why should i make all the emails
> sync with another server or storage disk at the same time when deliver the
> email.
>
>
>
> I’m sure someone else has a better answer, but you could just rsync the
> /home/vpopmail/domains/ area without a delete [that is the
> default for rsync]. It’s just a matter of how many times you want to run it
> per hour…
>
>
>
> Another possible solution would be to do something like this:
>
>
>
> Create .qmail- for each email account [the .qmail-*
> files go in /home/vpopmail/domains/ directory] with the following
> contents:
>
>
>
> /home/vpopmail/domains///Maildir/
>
>
> /home/vpopmail/domains///Maildir
>
>
>
> For this to work, you just create the
> /home/vpopmail/domains///Maildir directories
> with proper vpopmail.vchkpw protections. A copy of all inbound email will
> go to both areas, the live [top] one and the bottom [backup] area. The only
> issue with this solution, you don’t have a copy of any sent items if the
> user is using a web interface [and you want to catch those as well].
>
>
>
> Again, I’m sure someone on the list has a better way to do this than I.
>
> Carl
>



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to make mirror all the emails with all the mailbox in another server or storage

[Chandran Manikandan]

Dear Friends,
I am facing one challenge in my office.

I have 150 email box and 300 forward email accounts.

Some of the users deleted the emails from their email client when they quit
from company.
We are using IMAP account for all the employees.

I have made tap command to retrieve all the users incoming and outgoing
emails.
And i can recover all those emails from that particular account.

In this case, What i am thinking, Why should i make all the emails sync
with another server or storage disk at the same time when deliver the email.

Is it possible to make similar duplicate server or can i make only storage
disk.

In this case if anyone delete the emails from live server, i need to take
all the emails from duplicate storage disk.

Could anyone have the experience.

Please share to me the steps and help me a

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Email security from users

[Chandran Manikandan]

Hi Friends,
Yes, Taps method is having Qmailtoaster .
Thank you for your support.

Do we have any other tapping method.
I need to tap 10 email account to one email , not all accounts.
I have try the same method in taps file but doesn't work.

Appreciate anyone having solution.

On Mon, May 23, 2016 at 11:36 AM, Kisakye Alex <kisa...@gmail.com> wrote:

> Qmail actually has a module to archive every email going in and out of the
> server. Qtaps if I remember correctly. Please check the wiki for this
> module.
>
> Alex
> On May 23, 2016 12:25 PM, "Chandran Manikandan" <tech2m...@gmail.com>
> wrote:
>
>> Hi lodok,
>>
>> In archive option should need do in Server or email clients.
>> If server could you let me know the steps.
>> Or any other methods to tap the emails for all email.
>>
>> On Thu, May 12, 2016 at 5:28 PM, <a...@unet.de> wrote:
>>
>>> Hi Manikandan,
>>>
>>> what do you think about appliances for archiving emails?
>>> If you archive all emails, you keep track of all emails received and
>>> sent,
>>> have the ability to limit and secure access to the archive...
>>>
>>> Iodok
>>>
>>> > Hi Friends,
>>> >
>>> > I am running centos 6 with qmailtaoster + dovecot and facing new
>>> problems
>>> > with our users.
>>> >
>>> > 1. How can we stop allowing users to permanently delete mails from our
>>> > mail
>>> > client like Purge or Shift delete?
>>> > We are using Squirrelmail,Outlook and thunderbird email client
>>> >
>>> > 2  If any employee sends mail from our company email to their personal
>>> > email we need a mail alert or copy of that email to any particular
>>> email.
>>> > Is there any way?
>>> >
>>> >  3. I want to monitor both outbound and Inbound mails of all employees
>>> .
>>> > It
>>> > needs to be saved for future reference or verification purpose.
>>> >
>>> > Please help and advise required.
>>> >
>>> >
>>> > --
>>> > *Thanks,*
>>> > *Manikandan.C*
>>> > *System Administrator*
>>> >
>>>
>>>
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>
>>>
>>
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Email security from users

[Chandran Manikandan]

Hi lodok,

In archive option should need do in Server or email clients.
If server could you let me know the steps.
Or any other methods to tap the emails for all email.

On Thu, May 12, 2016 at 5:28 PM, <a...@unet.de> wrote:

> Hi Manikandan,
>
> what do you think about appliances for archiving emails?
> If you archive all emails, you keep track of all emails received and sent,
> have the ability to limit and secure access to the archive...
>
> Iodok
>
> > Hi Friends,
> >
> > I am running centos 6 with qmailtaoster + dovecot and facing new problems
> > with our users.
> >
> > 1. How can we stop allowing users to permanently delete mails from our
> > mail
> > client like Purge or Shift delete?
> > We are using Squirrelmail,Outlook and thunderbird email client
> >
> > 2  If any employee sends mail from our company email to their personal
> > email we need a mail alert or copy of that email to any particular email.
> > Is there any way?
> >
> >  3. I want to monitor both outbound and Inbound mails of all employees .
> > It
> > needs to be saved for future reference or verification purpose.
> >
> > Please help and advise required.
> >
> >
> > --
> > *Thanks,*
> > *Manikandan.C*
> > *System Administrator*
> >
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] squirrelmail is not working

[Chandran Manikandan]

Hi Eric,
Thank you.
It's working now after restarted all the relevant services including
dovecot.
Thank you friends for your help to fixed my issue.

On Mon, Apr 18, 2016 at 12:28 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Try restarting Dovecot.
>
>
> On 4/17/2016 9:40 PM, Chandran Manikandan wrote:
>
> Hi Eric,
> Greetings,
> I have tried first step and installed successfully then it's shows below
> message.
> A new include directive was added:
>
> /etc/httpd/conf/squirrelmail.conf
>
>  Configuration:
> If you plan to use it in a VirtualDomain please delete
> the include directive from httpd.conf and  add it  in
> your VirtualDomain
>
>
> Based on that I have configured
> Now I could be able to open the webpage and see the emails.
> But I have face another problem.
>
> I cannot send email from webmail to the same domain and another domains.
> It's shown below error message.
>
> Message not sent. Server replied:
>
> Temporary authentication failure
> 454 oops, problem with child and I can't auth (#4.3.0)
>
>
> Could you help me to fix this issue.
>
> On Thu, Apr 14, 2016 at 9:03 PM, Eric <ebr...@whitehorsetc.com> wrote:
>
>> Hi Chandran,
>>
>> # wget
>> http://mirror2.qmailtoaster.com/current/CentOS/6/x86_64/squirrelmail-1.4.22-0.qt.el6.x86_64.rpm
>> # rpm -Uvh squirrelmail-1.4.22-0.qt.el6.x86_64.rpm
>>
>> You could also do:
>>
>> # yum localinstall squirrelmail-1.4.22-0.qt.el6.x86_64.rpm
>>
>> Let me know how it works out.
>>
>> EricB
>>
>>
>> On 4/14/2016 4:58 AM, Chandran Manikandan wrote:
>>
>> Hi Eric,
>> Could you let me know how to install Squirrelmail again without affect
>> any existing package and emails.
>>
>> Can i try qt-install or other method.
>>
>> On Thu, Apr 7, 2016 at 2:46 PM, Chandran Manikandan <
>> <tech2m...@gmail.com>tech2m...@gmail.com> wrote:
>>
>>> Hi Eric,
>>> Thank you.
>>>
>>> I have removed existing squirrelmail.rpm file and my qt repo below.
>>>
>>> qmailtoaster-dist.repo
>>> qmailtoaster-nodist.repo
>>>
>>> So please help me to fix this squirrelmail issue.
>>>
>>> qmailtoaster-dist.repo file
>>>
>>> [qmailtoaster-current]
>>> name=QmailToaster current - CentOS $releasever
>>> mirrorlist= <http://mirrors.qmailtoaster.com/current/CentOS/mirror.list>
>>> http://mirrors.qmailtoaster.com/current/CentOS/mirror.list
>>> enabled=0
>>> gpgcheck=1
>>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
>>> priority=7
>>>
>>> # packages being tested, not for production hosts
>>>
>>> [qmailtoaster-testing]
>>> name=QmailToaster testing - CentOS $releasever
>>> mirrorlist= <http://mirrors.qmailtoaster.com/testing/CentOS/mirror.list>
>>> http://mirrors.qmailtoaster.com/testing/CentOS/mirror.list
>>> enabled=1
>>> gpgcheck=1
>>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
>>> priority=7
>>>
>>> # packages being developed, for developer use only
>>>
>>> [qmailtoaster-devel]
>>> name=QmailToaster development - CentOS $releasever
>>> mirrorlist= <http://mirrors.qmailtoaster.com/devel/CentOS/mirror.list>
>>> http://mirrors.qmailtoaster.com/devel/CentOS/mirror.list
>>> enabled=0
>>> gpgcheck=0
>>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-shubes
>>> priority=7
>>>
>>> qmailtoaster-nodist.repo file below
>>>
>>> # qmailtoaster-nodist.repo
>>> #
>>> # The QmailToaster nodist repo supports multiple distros, as well as
>>> universal
>>> # rpms containing scripts that can be used on any platform or arch.
>>> #
>>> # Packages for specific distros are found by their respective repo file.
>>> #
>>> # The 'current' repos are considered production worthy, aka stable.
>>> # The 'testing' repos are considered beta, and should not be used in
>>> production.
>>> # The 'devel' repos are considered alpha, and should be used only by
>>> developers.
>>> #
>>> # Packages in the current repos have all been promoted from testing,
>>> # and signed with the qmailtoaster key.
>>> # If you have installed a package from the testing repo, there is no
>>> purpose
>>> # in reinstalling it after it's been promoted into current.
>>> #
>>> # Packages in testing have been newly built (they're not develop

Re: [qmailtoaster] squirrelmail is not working

[Chandran Manikandan]

Hi Eric,
Greetings,
I have tried first step and installed successfully then it's shows below
message.
A new include directive was added:

/etc/httpd/conf/squirrelmail.conf

 Configuration:
If you plan to use it in a VirtualDomain please delete
the include directive from httpd.conf and  add it  in
your VirtualDomain


Based on that I have configured
Now I could be able to open the webpage and see the emails.
But I have face another problem.

I cannot send email from webmail to the same domain and another domains.
It's shown below error message.

Message not sent. Server replied:

Temporary authentication failure
454 oops, problem with child and I can't auth (#4.3.0)


Could you help me to fix this issue.

On Thu, Apr 14, 2016 at 9:03 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Hi Chandran,
>
> # wget
> http://mirror2.qmailtoaster.com/current/CentOS/6/x86_64/squirrelmail-1.4.22-0.qt.el6.x86_64.rpm
> # rpm -Uvh squirrelmail-1.4.22-0.qt.el6.x86_64.rpm
>
> You could also do:
>
> # yum localinstall squirrelmail-1.4.22-0.qt.el6.x86_64.rpm
>
> Let me know how it works out.
>
> EricB
>
>
> On 4/14/2016 4:58 AM, Chandran Manikandan wrote:
>
> Hi Eric,
> Could you let me know how to install Squirrelmail again without affect any
> existing package and emails.
>
> Can i try qt-install or other method.
>
> On Thu, Apr 7, 2016 at 2:46 PM, Chandran Manikandan <
> <tech2m...@gmail.com>tech2m...@gmail.com> wrote:
>
>> Hi Eric,
>> Thank you.
>>
>> I have removed existing squirrelmail.rpm file and my qt repo below.
>>
>> qmailtoaster-dist.repo
>> qmailtoaster-nodist.repo
>>
>> So please help me to fix this squirrelmail issue.
>>
>> qmailtoaster-dist.repo file
>>
>> [qmailtoaster-current]
>> name=QmailToaster current - CentOS $releasever
>> mirrorlist=http://mirrors.qmailtoaster.com/current/CentOS/mirror.list
>> enabled=0
>> gpgcheck=1
>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
>> priority=7
>>
>> # packages being tested, not for production hosts
>>
>> [qmailtoaster-testing]
>> name=QmailToaster testing - CentOS $releasever
>> mirrorlist=http://mirrors.qmailtoaster.com/testing/CentOS/mirror.list
>> enabled=1
>> gpgcheck=1
>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
>> priority=7
>>
>> # packages being developed, for developer use only
>>
>> [qmailtoaster-devel]
>> name=QmailToaster development - CentOS $releasever
>> mirrorlist=http://mirrors.qmailtoaster.com/devel/CentOS/mirror.list
>> enabled=0
>> gpgcheck=0
>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-shubes
>> priority=7
>>
>> qmailtoaster-nodist.repo file below
>>
>> # qmailtoaster-nodist.repo
>> #
>> # The QmailToaster nodist repo supports multiple distros, as well as
>> universal
>> # rpms containing scripts that can be used on any platform or arch.
>> #
>> # Packages for specific distros are found by their respective repo file.
>> #
>> # The 'current' repos are considered production worthy, aka stable.
>> # The 'testing' repos are considered beta, and should not be used in
>> production.
>> # The 'devel' repos are considered alpha, and should be used only by
>> developers.
>> #
>> # Packages in the current repos have all been promoted from testing,
>> # and signed with the qmailtoaster key.
>> # If you have installed a package from the testing repo, there is no
>> purpose
>> # in reinstalling it after it's been promoted into current.
>> #
>> # Packages in testing have been newly built (they're not development
>> copies),
>> # and are signed with the qmailtoaster key.
>> #
>> # Packages in devel may or may not be signed by the developer.
>> #
>> # If the mirrorlist= does not work for you, as a fall back you can try the
>> # remarked out baseurl= line instead.
>> #
>>
>> # current (stable) packages
>>
>> [qmailtoaster-current-nodist]
>> name=QmailToaster current - nodist (universal)
>> mirrorlist=http://mirrors.qmailtoaster.com/current/nodist/mirror.list
>> #baseurl=http://mirrors.qmailtoaster.com/current/nodist
>> enabled=0
>> gpgcheck=1
>> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
>> priority=7
>>
>> # packages being tested, not for production hosts
>>
>> [qmailtoaster-testing-nodist]
>> name=QmailToaster testing - nodist (universal)
>> mirrorlist=http://mirrors.qmailtoaster.com/testing/nodist/mirror.list
>> #baseurl=http://mirrors.qmailtoaster.com/testing/nodist
>> enabled=1
>

Re: [qmailtoaster] squirrelmail is not working

[Chandran Manikandan]

Hi Eric,
Could you let me know how to install Squirrelmail again without affect any
existing package and emails.

Can i try qt-install or other method.

On Thu, Apr 7, 2016 at 2:46 PM, Chandran Manikandan <tech2m...@gmail.com>
wrote:

> Hi Eric,
> Thank you.
>
> I have removed existing squirrelmail.rpm file and my qt repo below.
>
> qmailtoaster-dist.repo
> qmailtoaster-nodist.repo
>
> So please help me to fix this squirrelmail issue.
>
> qmailtoaster-dist.repo file
>
> [qmailtoaster-current]
> name=QmailToaster current - CentOS $releasever
> mirrorlist=http://mirrors.qmailtoaster.com/current/CentOS/mirror.list
> enabled=0
> gpgcheck=1
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
> priority=7
>
> # packages being tested, not for production hosts
>
> [qmailtoaster-testing]
> name=QmailToaster testing - CentOS $releasever
> mirrorlist=http://mirrors.qmailtoaster.com/testing/CentOS/mirror.list
> enabled=1
> gpgcheck=1
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
> priority=7
>
> # packages being developed, for developer use only
>
> [qmailtoaster-devel]
> name=QmailToaster development - CentOS $releasever
> mirrorlist=http://mirrors.qmailtoaster.com/devel/CentOS/mirror.list
> enabled=0
> gpgcheck=0
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-shubes
> priority=7
>
> qmailtoaster-nodist.repo file below
>
> # qmailtoaster-nodist.repo
> #
> # The QmailToaster nodist repo supports multiple distros, as well as
> universal
> # rpms containing scripts that can be used on any platform or arch.
> #
> # Packages for specific distros are found by their respective repo file.
> #
> # The 'current' repos are considered production worthy, aka stable.
> # The 'testing' repos are considered beta, and should not be used in
> production.
> # The 'devel' repos are considered alpha, and should be used only by
> developers.
> #
> # Packages in the current repos have all been promoted from testing,
> # and signed with the qmailtoaster key.
> # If you have installed a package from the testing repo, there is no
> purpose
> # in reinstalling it after it's been promoted into current.
> #
> # Packages in testing have been newly built (they're not development
> copies),
> # and are signed with the qmailtoaster key.
> #
> # Packages in devel may or may not be signed by the developer.
> #
> # If the mirrorlist= does not work for you, as a fall back you can try the
> # remarked out baseurl= line instead.
> #
>
> # current (stable) packages
>
> [qmailtoaster-current-nodist]
> name=QmailToaster current - nodist (universal)
> mirrorlist=http://mirrors.qmailtoaster.com/current/nodist/mirror.list
> #baseurl=http://mirrors.qmailtoaster.com/current/nodist
> enabled=0
> gpgcheck=1
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
> priority=7
>
> # packages being tested, not for production hosts
>
> [qmailtoaster-testing-nodist]
> name=QmailToaster testing - nodist (universal)
> mirrorlist=http://mirrors.qmailtoaster.com/testing/nodist/mirror.list
> #baseurl=http://mirrors.qmailtoaster.com/testing/nodist
> enabled=1
> gpgcheck=1
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
> priority=7
>
> # packages being developed, for developer use only
>
> [qmailtoaster-devel-nodist]
> name=QmailToaster devel - nodist (universal)
> mirrorlist=http://mirrors.qmailtoaster.com/devel/nodist/mirror.list
> #baseurl=http://mirrors.qmailtoaster.com/devel/nodist
> enabled=0
> gpgcheck=0
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-shubes
> priority=7
>
>
>
>
> Thank you in advance
>
>
>
>
>
> On Tue, Apr 5, 2016 at 10:58 PM, Eric <ebr...@whitehorsetc.com> wrote:
>
>> Yes, your QT squirrelmail got overwritten by another repo.
>> Remove squirrelmail (yum remove squirrelmail) and install QT squirrelmail
>> from mirrors. What's the priority on your QT repo in /etc/yum.repos.d?
>>
>>
>>
>>
>> On 4/3/2016 10:16 PM, Chandran Manikandan wrote:
>>
>> Hi Eric,
>> This machine had qmailtoaster with all packages was running fine earlier.
>> I had updated all packages through webmin two days back.
>>
>> Email is working fine in outlook and thunderbird after updated the
>> packages.
>>
>> But webmail(Squirrelmail) is not opening the page and shown above error.
>>
>> I have gone through yum.log . it show below package for squirrelmail.
>>
>> Mar 31 12:59:54 Updated: squirrelmail-1.4.22-4.el6.noarch
>>
>> Then I have checked squirrelmail rpm in my server it shows below.
>>
>> which squirrelmail
>>
>> /usr/bin/which: no s

Re: [qmailtoaster] squirrelmail is not working

[Chandran Manikandan]

Hi Eric,
Thank you.

I have removed existing squirrelmail.rpm file and my qt repo below.

qmailtoaster-dist.repo
qmailtoaster-nodist.repo

So please help me to fix this squirrelmail issue.

qmailtoaster-dist.repo file

[qmailtoaster-current]
name=QmailToaster current - CentOS $releasever
mirrorlist=http://mirrors.qmailtoaster.com/current/CentOS/mirror.list
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
priority=7

# packages being tested, not for production hosts

[qmailtoaster-testing]
name=QmailToaster testing - CentOS $releasever
mirrorlist=http://mirrors.qmailtoaster.com/testing/CentOS/mirror.list
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
priority=7

# packages being developed, for developer use only

[qmailtoaster-devel]
name=QmailToaster development - CentOS $releasever
mirrorlist=http://mirrors.qmailtoaster.com/devel/CentOS/mirror.list
enabled=0
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-shubes
priority=7

qmailtoaster-nodist.repo file below

# qmailtoaster-nodist.repo
#
# The QmailToaster nodist repo supports multiple distros, as well as
universal
# rpms containing scripts that can be used on any platform or arch.
#
# Packages for specific distros are found by their respective repo file.
#
# The 'current' repos are considered production worthy, aka stable.
# The 'testing' repos are considered beta, and should not be used in
production.
# The 'devel' repos are considered alpha, and should be used only by
developers.
#
# Packages in the current repos have all been promoted from testing,
# and signed with the qmailtoaster key.
# If you have installed a package from the testing repo, there is no purpose
# in reinstalling it after it's been promoted into current.
#
# Packages in testing have been newly built (they're not development
copies),
# and are signed with the qmailtoaster key.
#
# Packages in devel may or may not be signed by the developer.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#

# current (stable) packages

[qmailtoaster-current-nodist]
name=QmailToaster current - nodist (universal)
mirrorlist=http://mirrors.qmailtoaster.com/current/nodist/mirror.list
#baseurl=http://mirrors.qmailtoaster.com/current/nodist
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
priority=7

# packages being tested, not for production hosts

[qmailtoaster-testing-nodist]
name=QmailToaster testing - nodist (universal)
mirrorlist=http://mirrors.qmailtoaster.com/testing/nodist/mirror.list
#baseurl=http://mirrors.qmailtoaster.com/testing/nodist
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-qmailtoaster
priority=7

# packages being developed, for developer use only

[qmailtoaster-devel-nodist]
name=QmailToaster devel - nodist (universal)
mirrorlist=http://mirrors.qmailtoaster.com/devel/nodist/mirror.list
#baseurl=http://mirrors.qmailtoaster.com/devel/nodist
enabled=0
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-shubes
priority=7




Thank you in advance





On Tue, Apr 5, 2016 at 10:58 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Yes, your QT squirrelmail got overwritten by another repo.
> Remove squirrelmail (yum remove squirrelmail) and install QT squirrelmail
> from mirrors. What's the priority on your QT repo in /etc/yum.repos.d?
>
>
>
>
> On 4/3/2016 10:16 PM, Chandran Manikandan wrote:
>
> Hi Eric,
> This machine had qmailtoaster with all packages was running fine earlier.
> I had updated all packages through webmin two days back.
>
> Email is working fine in outlook and thunderbird after updated the
> packages.
>
> But webmail(Squirrelmail) is not opening the page and shown above error.
>
> I have gone through yum.log . it show below package for squirrelmail.
>
> Mar 31 12:59:54 Updated: squirrelmail-1.4.22-4.el6.noarch
>
> Then I have checked squirrelmail rpm in my server it shows below.
>
> which squirrelmail
>
> /usr/bin/which: no squirrelmail in
> (/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
>
> Is it any overwrited existing packages after updated or any file
> permission in squirrelmail folder. path:  /usr/share/squirrelmail
>
> Should i need to reinstall the squirrelmail package. If yes could you let
> me know the steps.
>
> Could you help me .
>
> On Mon, Apr 4, 2016 at 2:26 AM, Eric <ebr...@whitehorsetc.com> wrote:
>
>> Chandran,
>>
>> I'm not sure what's not working. Can you explain?
>>
>> What squirrelmail package is installed and where did it come from?
>>
>> What vpopmail and dovecot packages are installed.
>>
>> EricB
>>
>>
>> On 4/2/2016 11:40 PM, Chandran Manikandan wrote:
>>
>> Hi All,
>> I have running cenots 6.6 64 

[qmailtoaster] how to increase email size in one email account

[Chandran Manikandan]

Hi All,

Am running qmailtoaster in centos 6.6 64 bit.

I have allowed email size 10 MB in /var/qmail/control/databytes file and
able to send and receive emails with the 10 MB size.

I need to allow one email account 20 MB size email for send and receive,
rest of other accounts remain same 10 MB size.

Is there any option to allow in that file.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] squirrelmail is not working

[Chandran Manikandan]

Hi Eric,
This machine had qmailtoaster with all packages was running fine earlier.
I had updated all packages through webmin two days back.

Email is working fine in outlook and thunderbird after updated the packages.

But webmail(Squirrelmail) is not opening the page and shown above error.

I have gone through yum.log . it show below package for squirrelmail.

Mar 31 12:59:54 Updated: squirrelmail-1.4.22-4.el6.noarch

Then I have checked squirrelmail rpm in my server it shows below.

which squirrelmail

/usr/bin/which: no squirrelmail in
(/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)

Is it any overwrited existing packages after updated or any file permission
in squirrelmail folder. path:  /usr/share/squirrelmail

Should i need to reinstall the squirrelmail package. If yes could you let
me know the steps.

Could you help me .

On Mon, Apr 4, 2016 at 2:26 AM, Eric <ebr...@whitehorsetc.com> wrote:

> Chandran,
>
> I'm not sure what's not working. Can you explain?
>
> What squirrelmail package is installed and where did it come from?
>
> What vpopmail and dovecot packages are installed.
>
> EricB
>
>
> On 4/2/2016 11:40 PM, Chandran Manikandan wrote:
>
> Hi All,
> I have running cenots 6.6 64 bit machine.
> I have updated all packages through webmin.
> Am running qmailtoaster in the same machine.
> Squirrelmail is not working after updated the packages.
> It's shows welcome screen.
> virtual host config and squirrelmail config files are not change anything.
>
> Below is log for mail..com url from server.
>
> Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that
> RewriteRule directive is forbidden: /usr/share/squirrelmail/
>
> squirrelmail.conf below
>
> 
>
> Alias /webmail /usr/share/squirrelmail/
> 
>
> 
>   Options SymLinksIfOwnerMatch
>   DirectoryIndex index.php
>   Options Indexes MultiViews
>AllowOverride None
>   Order allow,deny
>   allow from all
> 
>
> httpd.conf below
> 
>ServerName mail..in
>ServerAlias .in/webmail
>ServerAdmin postmas...@.in
>DocumentRoot /usr/share/squirrelmail
>
>ErrorLog logs/mail.-error_log
>TransferLog logs/mail.-access_log
> 
>
>
>
> Could anyone help me to fix my issue
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] squirrelmail is not working

[Chandran Manikandan]

Hi All,
I have running cenots 6.6 64 bit machine.
I have updated all packages through webmin.
Am running qmailtoaster in the same machine.
Squirrelmail is not working after updated the packages.
It's shows welcome screen.
virtual host config and squirrelmail config files are not change anything.

Below is log for mail..com url from server.

Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that
RewriteRule directive is forbidden: /usr/share/squirrelmail/

squirrelmail.conf below



Alias /webmail /usr/share/squirrelmail/



  Options SymLinksIfOwnerMatch
  DirectoryIndex index.php
  Options Indexes MultiViews
   AllowOverride None
  Order allow,deny
  allow from all


httpd.conf below

   ServerName mail..in
   ServerAlias .in/webmail
   ServerAdmin postmas...@.in
   DocumentRoot /usr/share/squirrelmail

   ErrorLog logs/mail.-error_log
   TransferLog logs/mail.-access_log




Could anyone help me to fix my issue

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to block spam emails generated from my domain

[Chandran Manikandan]

Thank you Eric,
Let me check with them.

On Mon, Feb 1, 2016 at 2:23 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Not to avoid the question or be unhelpful in any way, Chandran, but I
> think you'd be better served asking this question on the spamassassin users
> list as they're the experts in all things SA.
> That said, are any spam email originating from your server?
>
> EricB
>
>
> On 1/31/2016 7:50 PM, Chandran Manikandan wrote:
>
> Hi Friends,
> 1. Our users received some spam emails which is showing our domain email
> account in From address.
> But those email account don't have mailbox in my server.
> 2. Second thing is some emails send spam emails in showing from address is
> our server mailbox.
> but i have check to click reply showing different email address and
> domains this reply...@mail.com
>
> How to fix those above two issues on my server.
> I am running Centos 6.6 64 bit server with spamdyke and spamassassin
> packages.
>
> My simcontrol rule is below.
>
>
> :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif:.exe:.chm:.com:.dll:.dot:.email:.hlp:.hta:.inf:.msi:.reg:.scr:.url:.vbs:.mpeg:.zip:.7z
>
> If i change spamhits = 5 or less spam emails are blocked but we cannot
> receive emails from our same domains
>
> Could you anyone of you provide solution to fix for me.
> Appreciate anyone help me to fix this.
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to block spam emails generated from my domain

[Chandran Manikandan]

Hi Friends,
1. Our users received some spam emails which is showing our domain email
account in From address.
But those email account don't have mailbox in my server.
2. Second thing is some emails send spam emails in showing from address is
our server mailbox.
but i have check to click reply showing different email address and domains
this reply...@mail.com

How to fix those above two issues on my server.
I am running Centos 6.6 64 bit server with spamdyke and spamassassin
packages.

My simcontrol rule is below.

:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif:.exe:.chm:.com:.dll:.dot:.email:.hlp:.hta:.inf:.msi:.reg:.scr:.url:.vbs:.mpeg:.zip:.7z

If i change spamhits = 5 or less spam emails are blocked but we cannot
receive emails from our same domains

Could you anyone of you provide solution to fix for me.
Appreciate anyone help me to fix this.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to upgrade Clamav 0.99

[Chandran Manikandan]

Dear Eric,
Sorry for the late reply. It's updated successfully of your rpm link.
Thank you.

On Mon, Dec 14, 2015 at 10:24 PM, Aleksander Podsiadły 
wrote:

> W dniu 14.12.2015, pon o godzinie 11∶02 -0300, użytkownik Natalio Gatti
> napisał:
> > Can I force the installation? Or it will break qmail?
>
> Download the source package:
>
> ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/srpms/clamav-0.99-0.qt.src.rpm
> recompile it:
> rmpbuild --rebuild clamav-0.99-0.qt.src.rmp
>
> It's more secure than force the instalation. I always compile all QMT
> packages from souces.
>
> --
> Pozdrawiam/Regards,
> mgr inż. Aleksander Podsiadły
> starszy informatyk
> Urząd Gminy w Mniowie
> ul. Centralna 9
> 26-080 Mniów
> tel:+48 413737002
> fax:+48 413737024
> mail:   a...@mniow.pl
> a...@mniow.eu
> jid:a...@jabber.mniow.pl
> gg: 9150578
>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to upgrade Clamav 0.99

[Chandran Manikandan]

Hi Eric,
Yes, I would like to get for Centos 6.
I have tried above your link but no luck.
Could you help me.

On Wed, Dec 9, 2015 at 9:40 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Hi Chandran,
>
> I have some 32bit binaries for CentOS 5
> <ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/5/testing/i386/clamav-toaster-0.99-1.4.12.i386.rpm>
>
> # rpm -Uvh
> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/5/testing/i386/clamav-toaster-0.99-1.4.12.i386.rpm
>
> I have none for CentOS 6. Do you need some for CentOS 6?
>
> Eric
>
>
> On 12/9/2015 1:14 AM, Chandran Manikandan wrote:
>
> Hi Eric,
> Your below link is working and perfectly updated on 6.6 64 bit
> How do i update on 32 bit.
> I have tried from your ftp but no luck.
> Could you help me.
>
> On Thu, Dec 3, 2015 at 11:57 PM, Philip Nix Guru <phi...@ows.ch> wrote:
>
>> Hello
>> I found the issue, it kinda depends on the version of the OS
>> --nomd5 was enough to installl
>>
>> Got still a  few legacy toasters :)
>>
>>
>> On 12/03/2015 04:35 PM, Eric wrote:
>>
>> Phillip,
>>
>> And for unpacking the source itself...
>>
>> [ebroch@mail2 ~]$  tar -zxvf rpmbuild/SOURCES/clamav-0.99.tar.gz -C ./
>>
>> [ebroch@mail2 ~]$ ls -l
>> total 4
>> drwxrwxr-x 26 ebroch ebroch 4096 Nov 25 09:54 clamav-0.99
>> drwxr-xr-x  5 ebroch ebroch   36 Aug  3 16:33 Maildir
>> drwxr-xr-x  4 ebroch ebroch   32 Dec  3 08:15 rpmbuild
>>
>>
>> Eric
>>
>> On 12/3/2015 8:19 AM, Eric wrote:
>>
>> Phillip,
>>
>> Hmmm.
>>
>> Here's my src file on my CentOS 7 server:
>>
>> [ebroch@mail2 ~]$ rpm -Uvh
>> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/testing/SRPMS/clamav-0.99-0.qt.src.rpm
>> Retrieving
>> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/testing/SRPMS/clamav-0.99-0.qt.src.rpm
>> Updating / installing...
>>1:clamav-0.99-0.qt # [100%]
>>
>> [ebroch@mail2 ~]$ ls -l
>> total 0
>> drwxr-xr-x 5 ebroch ebroch 36 Aug  3 16:33 Maildir
>> drwxr-xr-x 4 ebroch ebroch 32 Dec  3 08:15 rpmbuild
>>
>> [ebroch@mail2 ~]$ ls -l rpmbuild/*
>> rpmbuild/SOURCES:
>> total 15608
>> -rw-r--r-- 1 ebroch ebroch 15968038 Dec  1 11:15 clamav-0.99.tar.gz
>> -rw-rw-r-- 1 ebroch ebroch 2682 Nov 21  2014
>> clamav-0.9x-qmailtoaster.patch
>> -rw-rw-r-- 1 ebroch ebroch 1398 Jan 28  2015 clamd.init
>> -rw-rw-r-- 1 ebroch ebroch 1469 Nov 21  2014 freshclam.init
>>
>> rpmbuild/SPECS:
>> total 24
>> -rw-rw-r-- 1 ebroch ebroch 22017 Dec  2 09:25 clamav.spec
>>
>>
>> It unpacked fine as you can see above. On what machine did you unpack the
>> source file?
>>
>> Eric
>>
>> On 12/3/2015 7:29 AM, Philip wrote:
>>
>> Hello Eri
>> there is a problem with your src file
>> error: unpacking of archive failed on file
>> /usr/src/redhat/SOURCES/clamav-0.99.tar.gz;566051b7: cpio: MD5 sum
>> mismatch
>>
>> On 12/03/2015 03:01 PM, Eric wrote:
>>
>> And on CentOS 7
>>
>> rpm -Uvh
>>
>> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/testing/x86_64/clamav-0.99-0.qt.el7.x86_64.rpm
>>
>> or
>>
>> # yum --enablerepo=whtc-qmt-testing update
>>
>> if you have White Horse repo enable in your yum configuration.
>>
>>
>> On 12/3/2015 6:56 AM, Eric wrote:
>>
>> rpm -Uvh
>>
>> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/testing/x86_64/clamav-0.99-0.qt.el6.x86_64.rpm
>>
>> or
>>
>> # yum --enablerepo=whtc-qmt-testing update
>>
>> If you have White Horse repos in your yum configuration.
>>
>>
>>
>> On 12/3/2015 2:16 AM, NoriyukiHayashi wrote:
>>
>> Hi,
>>
>> U can download clamav-0.99.tar.gz.
>> Then
>> rpm -ivh clamav-0.98.7.qt.srm.
>> Change spec file.
>> ftp upload clamav-0.99.tar.gz
>> Then
>> rpmbiuld -ba --target x86_64 --define 'qt' clamav.spec
>>
>> U can make clamav-0.99.qt srpm
>>
>> If u can not do that.
>> I will do that end of this week and upload web server that u can download
>> by the way.
>> My target is centos 6.6.
>>
>> regards,
>>
>>
>>
>> Dear Friends,
>>
>> My server having warning messages Clamav is outdated need to update from
>> 0.98.7 to 0.99
>>
>> Could anyone help me .
>> My server is Centos 6.5 64 bit
>>
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System A

Re: [qmailtoaster] How to upgrade Clamav 0.99

[Chandran Manikandan]

Hi Eric,
Your below link is working and perfectly updated on 6.6 64 bit
How do i update on 32 bit.
I have tried from your ftp but no luck.
Could you help me.

On Thu, Dec 3, 2015 at 11:57 PM, Philip Nix Guru  wrote:

> Hello
> I found the issue, it kinda depends on the version of the OS
> --nomd5 was enough to installl
>
> Got still a  few legacy toasters :)
>
>
> On 12/03/2015 04:35 PM, Eric wrote:
>
> Phillip,
>
> And for unpacking the source itself...
>
> [ebroch@mail2 ~]$  tar -zxvf rpmbuild/SOURCES/clamav-0.99.tar.gz -C ./
>
> [ebroch@mail2 ~]$ ls -l
> total 4
> drwxrwxr-x 26 ebroch ebroch 4096 Nov 25 09:54 clamav-0.99
> drwxr-xr-x  5 ebroch ebroch   36 Aug  3 16:33 Maildir
> drwxr-xr-x  4 ebroch ebroch   32 Dec  3 08:15 rpmbuild
>
>
> Eric
>
> On 12/3/2015 8:19 AM, Eric wrote:
>
> Phillip,
>
> Hmmm.
>
> Here's my src file on my CentOS 7 server:
>
> [ebroch@mail2 ~]$ rpm -Uvh
> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/testing/SRPMS/clamav-0.99-0.qt.src.rpm
> Retrieving
> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/testing/SRPMS/clamav-0.99-0.qt.src.rpm
> Updating / installing...
>1:clamav-0.99-0.qt # [100%]
>
> [ebroch@mail2 ~]$ ls -l
> total 0
> drwxr-xr-x 5 ebroch ebroch 36 Aug  3 16:33 Maildir
> drwxr-xr-x 4 ebroch ebroch 32 Dec  3 08:15 rpmbuild
>
> [ebroch@mail2 ~]$ ls -l rpmbuild/*
> rpmbuild/SOURCES:
> total 15608
> -rw-r--r-- 1 ebroch ebroch 15968038 Dec  1 11:15 clamav-0.99.tar.gz
> -rw-rw-r-- 1 ebroch ebroch 2682 Nov 21  2014
> clamav-0.9x-qmailtoaster.patch
> -rw-rw-r-- 1 ebroch ebroch 1398 Jan 28  2015 clamd.init
> -rw-rw-r-- 1 ebroch ebroch 1469 Nov 21  2014 freshclam.init
>
> rpmbuild/SPECS:
> total 24
> -rw-rw-r-- 1 ebroch ebroch 22017 Dec  2 09:25 clamav.spec
>
>
> It unpacked fine as you can see above. On what machine did you unpack the
> source file?
>
> Eric
>
> On 12/3/2015 7:29 AM, Philip wrote:
>
> Hello Eri
> there is a problem with your src file
> error: unpacking of archive failed on file
> /usr/src/redhat/SOURCES/clamav-0.99.tar.gz;566051b7: cpio: MD5 sum
> mismatch
>
> On 12/03/2015 03:01 PM, Eric wrote:
>
> And on CentOS 7
>
> rpm -Uvh
>
> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/testing/x86_64/clamav-0.99-0.qt.el7.x86_64.rpm
>
> or
>
> # yum --enablerepo=whtc-qmt-testing update
>
> if you have White Horse repo enable in your yum configuration.
>
>
> On 12/3/2015 6:56 AM, Eric wrote:
>
> rpm -Uvh
>
> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/6/testing/x86_64/clamav-0.99-0.qt.el6.x86_64.rpm
>
> or
>
> # yum --enablerepo=whtc-qmt-testing update
>
> If you have White Horse repos in your yum configuration.
>
>
>
> On 12/3/2015 2:16 AM, NoriyukiHayashi wrote:
>
> Hi,
>
> U can download clamav-0.99.tar.gz.
> Then
> rpm -ivh clamav-0.98.7.qt.srm.
> Change spec file.
> ftp upload clamav-0.99.tar.gz
> Then
> rpmbiuld -ba --target x86_64 --define 'qt' clamav.spec
>
> U can make clamav-0.99.qt srpm
>
> If u can not do that.
> I will do that end of this week and upload web server that u can download
> by the way.
> My target is centos 6.6.
>
> regards,
>
>
>
> Dear Friends,
>
> My server having warning messages Clamav is outdated need to update from
> 0.98.7 to 0.99
>
> Could anyone help me .
> My server is Centos 6.5 64 bit
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> --
> NoriyukiHayashi  ibisMailで送信！
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to upgrade Clamav 0.99

[Chandran Manikandan]

Dear Friends,

My server having warning messages Clamav is outdated need to update from
0.98.7 to 0.99

Could anyone help me .
My server is Centos 6.5 64 bit


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Bad attachment error

[Chandran Manikandan]

Hi Eric,
Actually the document was some issue and couldn't find out , what's the
issue there.
But the same doc content copied and created new doc to paste there then i
tried to send it's sent itself the same domain.

On Sat, Nov 28, 2015 at 12:54 AM, Eric Broch <ebr...@whitehorsetc.com>
wrote:

> So, if I understand you correctly, the only domain that fails, from
> which you send doc and docx attachments to your QMT is gmail, correct?
> If, perhaps, I was to send you a doc or docx attachment from my email
> address you'd receive it with no problems?
>
> On 11/27/2015 3:34 AM, Chandran Manikandan wrote:
> > Hi Eric,
> > I have tried the same doc,docx documents all the contents were copied and
> > open new doc and paste it ,
> > Then tried to send same email and other domains it's working fine.
> > But if i tried the same documents to send it got bounce.
> >
> > On Wed, Nov 25, 2015 at 10:53 PM, Eric <ebr...@whitehorsetc.com> wrote:
> >
> >> Can you send a similar (doc,docx) email to the same account from other
> >> than gmail?
> >>
> >>
> >>
> >> On 11/24/2015 9:01 PM, Chandran Manikandan wrote:
> >>
> >> Hi Friends,
> >> One of my friend send an email from gmail to my domain with attachment.
> >> All the attachments are .doc and .docx format. But he got bounce message
> >> when he tried to send an email to me. Please see the below error message
> >> and help me to sort out this issue.
> >>
> >> Error:
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> *Delivery to the following recipient failed permanently:
> >> x...@domain.com <http://domain.com> Technical details of permanent
> failure:
> >> Google tried to deliver your message, but it was rejected by the server
> for
> >> the recipient domain domain.com <http://domain.com> by mail.domain.com
> >> <http://mail.domain.com>. [xx.xxx.xxx.xxx]. The error that the other
> server
> >> returned was: 554 Your email was rejected because it contains a bad
> >> attachment: f*
> >>
> >>
> >> *My Simscan config below.*
> >>
> >>
> >>
> >>
> *:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif:.exe:.chm:.com:.dll:.dot:.email:.hlp:.hta:.inf:.msi:.reg:.scr:.url:.vbs:.mpeg:.zip:.7z*
> >>
> >>
> >> --
> >> *Thanks,*
> >> *Manikandan.C*
> >> *System Administrator*
> >>
> >>
> >>
> >
> >
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Bad attachment error

[Chandran Manikandan]

Hi Eric,
I have tried the same doc,docx documents all the contents were copied and
open new doc and paste it ,
Then tried to send same email and other domains it's working fine.
But if i tried the same documents to send it got bounce.

On Wed, Nov 25, 2015 at 10:53 PM, Eric <ebr...@whitehorsetc.com> wrote:

> Can you send a similar (doc,docx) email to the same account from other
> than gmail?
>
>
>
> On 11/24/2015 9:01 PM, Chandran Manikandan wrote:
>
> Hi Friends,
> One of my friend send an email from gmail to my domain with attachment.
> All the attachments are .doc and .docx format. But he got bounce message
> when he tried to send an email to me. Please see the below error message
> and help me to sort out this issue.
>
> Error:
>
>
>
>
>
>
>
>
>
> *Delivery to the following recipient failed permanently:
> x...@domain.com <http://domain.com> Technical details of permanent failure:
> Google tried to deliver your message, but it was rejected by the server for
> the recipient domain domain.com <http://domain.com> by mail.domain.com
> <http://mail.domain.com>. [xx.xxx.xxx.xxx]. The error that the other server
> returned was: 554 Your email was rejected because it contains a bad
> attachment: f*
>
>
> *My Simscan config below.*
>
>
>
> *:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif:.exe:.chm:.com:.dll:.dot:.email:.hlp:.hta:.inf:.msi:.reg:.scr:.url:.vbs:.mpeg:.zip:.7z*
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Bad attachment error

[Chandran Manikandan]

Hi Friends,
One of my friend send an email from gmail to my domain with attachment.
All the attachments are .doc and .docx format. But he got bounce message
when he tried to send an email to me. Please see the below error message
and help me to sort out this issue.

Error:









*Delivery to the following recipient failed permanently:
x...@domain.com  Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for
the recipient domain domain.com  by mail.domain.com
. [xx.xxx.xxx.xxx]. The error that the other server
returned was: 554 Your email was rejected because it contains a bad
attachment: f*


*My Simscan config below.*


*:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif:.exe:.chm:.com:.dll:.dot:.email:.hlp:.hta:.inf:.msi:.reg:.scr:.url:.vbs:.mpeg:.zip:.7z*


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Qmailtoaster installation on Centos 7.1

[Chandran Manikandan]

Dear Eric,
Thanks for your help.
It was working perfect on centos 7 machine.
But am unable to do qt-backup command. it show the below message. should i
need to any further thing.

-bash: qt-backup: command not found

Am unable to do the iptables in this machine.
Could you let me know. should i need to do firewalld or iptables.
In which one is good for qmailtoaster

On Mon, Oct 19, 2015 at 12:41 PM, Eric Broch <ebr...@whitehorsetc.com>
wrote:

> On 10/18/2015 9:03 PM, Chandran Manikandan wrote:
>
> Hi Folks,
>
> How are you all ?
>
> I have installed Centos 7.1 on my new IBM server machine.
>
> I would like to install qmailtoaster on this machine.
>
> Could anyone have the experience to install it.
>
> Please help me to provide the steps and configuration.
>
> Thanks in advance.
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
> Chandran,
>
> There are two methods now
>
> Method 1)
> a) # curl
> <ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh>
> ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh >
> qt_prep.sh
> b) # chmod 755 qt_prep.sh
> c) # sh qt_prep.sh (Automatic reboot)
> d) # sh qt_grp_install.sh
>
> Method 2)
> a) # curl
> <ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh>
> ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh >
> qt_prep.sh
> b) # chmod 755 qt_prep.sh
> c) # sh qt_prep.sh (Automatic reboot)
> d) # sh qt_install.sh
> e) # rpm -Uvh
> ftp://ftp.whitehorsetc.com/pub/repo/qmt/CentOS/7/current/noarch/whtc-qmt-1-1.qt.el7.noarch.rpm
>
> Updating QMT
> yum --enablerepo=whtc-qmt-testing update
>
> Eric
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Qmailtoaster installation on Centos 7.1

[Chandran Manikandan]

Hi Folks,

How are you all ?

I have installed Centos 7.1 on my new IBM server machine.

I would like to install qmailtoaster on this machine.

Could anyone have the experience to install it.

Please help me to provide the steps and configuration.

Thanks in advance.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Hi Friends,

I found in Google for my requirements it's called auto bcc providing in our
server to solve my issue.
In our qmailtoaster earlier version had the qmail-tap which we need to make
whole domain email account sent emails forward to any email account or any
one email account sent to other email account from our server.

But when i went on server to check this file is not there.

Could anyone have idea about this.

Please let me know if you have any idea about this and configuration steps.

FYR Below.

*taps*

This file contains email archiving instructions-also known as tap/tapping.
The *taps* file (empty, 0-byte file) is not included in the basic, default
toaster install.

The *tap-patch* is in the toaster package, however...you just need to
configure it by:

   1. touch /var/qmail/control/taps
   2. vi /var/qmail/control/taps

insert tap info and save.

Examples:

a) To tap a whole domain add a line like: .*@domain.com:j...@example.com
---'joe' gets a copy of all incoming and outgoing mail for the domain.

b) To tap an individual email address add a line like: u...@domain.com:o
t...@example.com ---'other' gets a copy of all incoming and outgoing mail
for 'user'

Thanks,
Mani.

On Tue, Sep 29, 2015 at 10:30 AM, Chandran Manikandan <tech2m...@gmail.com>
wrote:

> Hi Havrla,
> Thanks for your help.
> So you mean to say need to create domain and user for backup with the same
> server with above example and after that do a rsync.
> May am i right.
> The problem is if they delete from their email . is it affect in backup
> domain also or not.
> If not affected the backup domain then it will useful for me.
>
> Or if any one give simple solution.
>
> What ever outbound mails go out from our domain in any account to store
> those outbound mails to any one email account.
>
> If possible to do any rule in our server.
>
> If made a rule like that then we can monitor those email sent items in
> that particular email account.
>
> Anyone face this kind of experience. kindly share me.
>
> On Tue, Sep 29, 2015 at 3:18 AM, Havrla <hav...@lhotkanet.cz> wrote:
>
>> Heloo
>>
>> idea
>>
>> 0)
>> @example_my_domain.com
>> home in  /home/vpopmail/domains/example_my_domain.com  - ok
>>
>> 1) create domain
>> create in vpopmail  "backup/mirror" domainexample_my_domain.back
>>
>> 2) rsync
>> #!/bin/bash
>> rsync -av  /home/vpopmail/domains/example_my_domain.com/*
>> /home/vpopmail/domains/example_my_domain.back
>>
>> 3)
>> add people account  example_my_domain.back  to outlook.firefox
>>
>> ??
>> example_my_domain.back  = all emails
>>
>> Havrla
>>
>>
>>
>>
>>
>>
>>
>> Dne 28.9.2015 04:28, Chandran Manikandan napsal(a):
>>
>> Dear Friends,
>> Thanks for your kind suggestion. My problem is our most Senior people
>> used their email account in their office Desktop(outlook),home(Outlook) and
>> handsets. If they want to moved emails from his inbox or Sent items
>> intentionally. How to retrieve those emails . If inbox emails we could make
>> forward option to create similar b...@domain.com email account to retrieve
>> that. The main problem is Sent items.
>> In blackberry server have one option autobcc if any one sent emails from
>> blackberry handset it will copy those sent items email to other account.
>> If possible to make similar function in server for particular users.
>> Then we would recover those sent items emails.
>>
>> Please share your thoughts and solution.
>>
>> As per your advise if i use rsync option it will backup all emails with
>> mirror concept. but how do i get those emails from backup folder. Do i need
>> to restore any email account from rsync backup drive.
>>
>> could any one give clear solution of my query.
>>
>> Thanks,
>>
>>
>> On Sat, Sep 26, 2015 at 5:39 AM, AGM SOFT <agms...@gmail.com> wrote:
>>
>>> Check-out expunge plugin for dovecot.
>>> It allows you to retain all deleted emails.
>>>
>>> AM
>>> Em 25/09/2015 09:36, "Chandran Manikandan" <tech2m...@gmail.com>
>>> escreveu:
>>>
>>>> Hi Friends,
>>>>
>>>> I need your help of my below.
>>>>
>>>> 1. Currently am using Centos 6.6 Final and Qmail toaster,dovecot  on
>>>> our server
>>>>
>>>> 2. We are using Outlook,Thunderbird and Squirrel webmail to access
>>>> emails.
>>>>
>>>> 3. The help is need for some our senior people sent emails to clients.
>>>> Those emails after their sent moved from

Re: Re[2]: [qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Hi Noriyuki,

Thanks for your advise.
Yes i need to do this process only particular email accounts only.

Could you let me know the procedure to install and configure lsyncd+rsync
in centos 6.6 server.
Please make sure it will not affect any existing system installation and
configuration.

As per your advised if i do this process how do i retrieve emails back from
sync location on live server.
Could you elaborate your advise.

Thanks


On Mon, Sep 28, 2015 at 1:33 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
wrote:

> Hi,
>
> It is seems spy watching...
> So, usually you can use MTU like that function.
>
> Regarding receiving mail as follow.
> 1. You can use virtual alias for real receiver and receive evidence.
> Regarding sending mail as follow.
> 1. I guess that you can use lsyncd and rsync then sync realtime to
> backyard.
>
> If you use lsyncd+rsync that you can keep sending and receiving email to
> anotoher folder as realtime.
>
> I hope that you have good hint.
>
> Kind regards,
> Noriyuki Hayashi
>
>
> On Mon, 28 Sep 2015 13:06:37 +0800
> Chandran Manikandan <tech2m...@gmail.com> wrote:
>
> > Dear Eric,
> >
> > we have forward option in qmailadmin whoever send email to any email
> > account we can forward to other email accounts.
> >
> > Similar function i need to make for sent items. whoever send email from
> our
> > domain to any email account we need those send items email copied to any
> > email account.
> >
> > Why i need this .?
> >
> > In my organization senior persons removed from their sent items email
> from
> > themselves and if our management require to retrieve those emails from
> > their sent items could not do that..
> >
> > In this case if do we have similar forward option for sent items email
> then
> > it will easily retrieve from that email account of their emails.
> >
> >
> > On Mon, Sep 28, 2015 at 12:02 PM, Eric Broch <ebr...@whitehorsetc.com>
> > wrote:
> >
> > > I'm not really sure what your asking, or what is the problem.
> > >
> > >
> > > On 9/27/2015 8:28 PM, Chandran Manikandan wrote:
> > >
> > > Dear Friends,
> > > Thanks for your kind suggestion. My problem is our most Senior people
> used
> > > their email account in their office Desktop(outlook),home(Outlook) and
> > > handsets. If they want to moved emails from his inbox or Sent items
> > > intentionally. How to retrieve those emails . If inbox emails we could
> make
> > > forward option to create similar b...@domain.com email account to
> retrieve
> > > that. The main problem is Sent items.
> > > In blackberry server have one option autobcc if any one sent emails
> from
> > > blackberry handset it will copy those sent items email to other
> account.
> > > If possible to make similar function in server for particular users.
> Then
> > > we would recover those sent items emails.
> > >
> > > Please share your thoughts and solution.
> > >
> > > As per your advise if i use rsync option it will backup all emails with
> > > mirror concept. but how do i get those emails from backup folder. Do i
> need
> > > to restore any email account from rsync backup drive.
> > >
> > > could any one give clear solution of my query.
> > >
> > > Thanks,
> > >
> > >
> > > On Sat, Sep 26, 2015 at 5:39 AM, AGM SOFT <agms...@gmail.com> wrote:
> > >
> > >> Check-out expunge plugin for dovecot.
> > >> It allows you to retain all deleted emails.
> > >>
> > >> AM
> > >> Em 25/09/2015 09:36, "Chandran Manikandan" <tech2m...@gmail.com>
> > >> escreveu:
> > >>
> > >>> Hi Friends,
> > >>>
> > >>> I need your help of my below.
> > >>>
> > >>> 1. Currently am using Centos 6.6 Final and Qmail toaster,dovecot  on
> our
> > >>> server
> > >>>
> > >>> 2. We are using Outlook,Thunderbird and Squirrel webmail to access
> > >>> emails.
> > >>>
> > >>> 3. The help is need for some our senior people sent emails to
> clients.
> > >>> Those emails after their sent moved from their sent item folder to
> their
> > >>> local outlook files(Desktop storage) or removed from server.
> > >>>
> > >>> 4. I want to restrict to removed or moved emails from inbox and sent
> > >>> items folder
> > >>>
>

Re: [qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Hi Noriyuki,
Thanks for your reply.
So you mean to say will not recover if user delete any emails ever rsync to
another path.

Let me try lsyncd+rsync in testing server for the realtime.

In case if i need to see the data from backup location how to see in
outlook or any other email client.

Do i need to create dummy email account and restore that folder from sync
location or any other method is there.



On Mon, Sep 28, 2015 at 2:52 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
wrote:

> Hi,
>
> I complied lsyncd-2.1.5 on the CentOS-6.6 as attached.
> But I could not send, maybe.
> You can download from
> https://code.google.com/p/lsyncd/
> I recommend 2.1.5.
> you can use yum for rsync.
>
> > Yes i need to do this process only particular email accounts only.
> You can do lsyncd+rsync between
> /home/vpopmail/domains/example.com/superviser to
> /home/vpopmail/domains/example.com/superviser.bk
> >
> > Could you let me know the procedure to install and configure lsyncd+rsync
> > in centos 6.6 server.
> > Please make sure it will not affect any existing system installation and
> > configuration.
> You must do the test on the test server as I recommend.
> lsyncd needs lua laungauge.
> You can check the google for install and configure.
> >
> > As per your advised if i do this process how do i retrieve emails back
> from
> > sync location on live server.
> This is a paradox.
> Because a man deleting sent email that a man does not neet at all.
> In this case that you need company rule nobody delete sent email for the
> evidence or some reasons.
>
> Hope that you can.
>
> Noriyuki Hayashi
>
> On Mon, 28 Sep 2015 14:21:16 +0800
> Chandran Manikandan <tech2m...@gmail.com> wrote:
>
> > Hi Noriyuki,
> >
> > Thanks for your advise.
> > Yes i need to do this process only particular email accounts only.
> >
> > Could you let me know the procedure to install and configure lsyncd+rsync
> > in centos 6.6 server.
> > Please make sure it will not affect any existing system installation and
> > configuration.
> >
> > As per your advised if i do this process how do i retrieve emails back
> from
> > sync location on live server.
> > Could you elaborate your advise.
> >
> > Thanks
> >
> >
> > On Mon, Sep 28, 2015 at 1:33 PM, Noriyuki Hayashi <nhaya...@wats.gr.jp>
> > wrote:
> >
> > > Hi,
> > >
> > > It is seems spy watching...
> > > So, usually you can use MTU like that function.
> > >
> > > Regarding receiving mail as follow.
> > > 1. You can use virtual alias for real receiver and receive evidence.
> > > Regarding sending mail as follow.
> > > 1. I guess that you can use lsyncd and rsync then sync realtime to
> > > backyard.
> > >
> > > If you use lsyncd+rsync that you can keep sending and receiving email
> to
> > > anotoher folder as realtime.
> > >
> > > I hope that you have good hint.
> > >
> > > Kind regards,
> > > Noriyuki Hayashi
> > >
> > >
> > > On Mon, 28 Sep 2015 13:06:37 +0800
> > > Chandran Manikandan <tech2m...@gmail.com> wrote:
> > >
> > > > Dear Eric,
> > > >
> > > > we have forward option in qmailadmin whoever send email to any email
> > > > account we can forward to other email accounts.
> > > >
> > > > Similar function i need to make for sent items. whoever send email
> from
> > > our
> > > > domain to any email account we need those send items email copied to
> any
> > > > email account.
> > > >
> > > > Why i need this .?
> > > >
> > > > In my organization senior persons removed from their sent items email
> > > from
> > > > themselves and if our management require to retrieve those emails
> from
> > > > their sent items could not do that..
> > > >
> > > > In this case if do we have similar forward option for sent items
> email
> > > then
> > > > it will easily retrieve from that email account of their emails.
> > > >
> > > >
> > > > On Mon, Sep 28, 2015 at 12:02 PM, Eric Broch <
> ebr...@whitehorsetc.com>
> > > > wrote:
> > > >
> > > > > I'm not really sure what your asking, or what is the problem.
> > > > >
> > > > >
> > > > > On 9/27/2015 8:28 PM, Chandran Manikandan wrote:
> > > > >
> > > > > Dear Friends,
> > > &

Re: [qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Hi Havrla,
Thanks for your help.
So you mean to say need to create domain and user for backup with the same
server with above example and after that do a rsync.
May am i right.
The problem is if they delete from their email . is it affect in backup
domain also or not.
If not affected the backup domain then it will useful for me.

Or if any one give simple solution.

What ever outbound mails go out from our domain in any account to store
those outbound mails to any one email account.

If possible to do any rule in our server.

If made a rule like that then we can monitor those email sent items in that
particular email account.

Anyone face this kind of experience. kindly share me.

On Tue, Sep 29, 2015 at 3:18 AM, Havrla <hav...@lhotkanet.cz> wrote:

> Heloo
>
> idea
>
> 0)
> @example_my_domain.com
> home in  /home/vpopmail/domains/example_my_domain.com  - ok
>
> 1) create domain
> create in vpopmail  "backup/mirror" domainexample_my_domain.back
>
> 2) rsync
> #!/bin/bash
> rsync -av  /home/vpopmail/domains/example_my_domain.com/*
> /home/vpopmail/domains/example_my_domain.back
>
> 3)
> add people account  example_my_domain.back  to outlook.firefox
>
> ??
> example_my_domain.back  = all emails
>
> Havrla
>
>
>
>
>
>
>
> Dne 28.9.2015 04:28, Chandran Manikandan napsal(a):
>
> Dear Friends,
> Thanks for your kind suggestion. My problem is our most Senior people used
> their email account in their office Desktop(outlook),home(Outlook) and
> handsets. If they want to moved emails from his inbox or Sent items
> intentionally. How to retrieve those emails . If inbox emails we could make
> forward option to create similar b...@domain.com email account to retrieve
> that. The main problem is Sent items.
> In blackberry server have one option autobcc if any one sent emails from
> blackberry handset it will copy those sent items email to other account.
> If possible to make similar function in server for particular users.  Then
> we would recover those sent items emails.
>
> Please share your thoughts and solution.
>
> As per your advise if i use rsync option it will backup all emails with
> mirror concept. but how do i get those emails from backup folder. Do i need
> to restore any email account from rsync backup drive.
>
> could any one give clear solution of my query.
>
> Thanks,
>
>
> On Sat, Sep 26, 2015 at 5:39 AM, AGM SOFT <agms...@gmail.com> wrote:
>
>> Check-out expunge plugin for dovecot.
>> It allows you to retain all deleted emails.
>>
>> AM
>> Em 25/09/2015 09:36, "Chandran Manikandan" <tech2m...@gmail.com>
>> escreveu:
>>
>>> Hi Friends,
>>>
>>> I need your help of my below.
>>>
>>> 1. Currently am using Centos 6.6 Final and Qmail toaster,dovecot  on our
>>> server
>>>
>>> 2. We are using Outlook,Thunderbird and Squirrel webmail to access
>>> emails.
>>>
>>> 3. The help is need for some our senior people sent emails to clients.
>>> Those emails after their sent moved from their sent item folder to their
>>> local outlook files(Desktop storage) or removed from server.
>>>
>>> 4. I want to restrict to removed or moved emails from inbox and sent
>>> items folder
>>>
>>> 5. Does it any method to forward those emails to particular email
>>> account on server without their knowledge like Inbox forward option.
>>>
>>> 6. How to protect those emails.
>>>
>>> Could anyone help me.
>>>
>>> --
>>> *Thanks,*
>>> *Manikandan.C*
>>> *System Administrator*
>>>
>>
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Dear Eric,

we have forward option in qmailadmin whoever send email to any email
account we can forward to other email accounts.

Similar function i need to make for sent items. whoever send email from our
domain to any email account we need those send items email copied to any
email account.

Why i need this .?

In my organization senior persons removed from their sent items email from
themselves and if our management require to retrieve those emails from
their sent items could not do that..

In this case if do we have similar forward option for sent items email then
it will easily retrieve from that email account of their emails.


On Mon, Sep 28, 2015 at 12:02 PM, Eric Broch <ebr...@whitehorsetc.com>
wrote:

> I'm not really sure what your asking, or what is the problem.
>
>
> On 9/27/2015 8:28 PM, Chandran Manikandan wrote:
>
> Dear Friends,
> Thanks for your kind suggestion. My problem is our most Senior people used
> their email account in their office Desktop(outlook),home(Outlook) and
> handsets. If they want to moved emails from his inbox or Sent items
> intentionally. How to retrieve those emails . If inbox emails we could make
> forward option to create similar b...@domain.com email account to retrieve
> that. The main problem is Sent items.
> In blackberry server have one option autobcc if any one sent emails from
> blackberry handset it will copy those sent items email to other account.
> If possible to make similar function in server for particular users.  Then
> we would recover those sent items emails.
>
> Please share your thoughts and solution.
>
> As per your advise if i use rsync option it will backup all emails with
> mirror concept. but how do i get those emails from backup folder. Do i need
> to restore any email account from rsync backup drive.
>
> could any one give clear solution of my query.
>
> Thanks,
>
>
> On Sat, Sep 26, 2015 at 5:39 AM, AGM SOFT <agms...@gmail.com> wrote:
>
>> Check-out expunge plugin for dovecot.
>> It allows you to retain all deleted emails.
>>
>> AM
>> Em 25/09/2015 09:36, "Chandran Manikandan" <tech2m...@gmail.com>
>> escreveu:
>>
>>> Hi Friends,
>>>
>>> I need your help of my below.
>>>
>>> 1. Currently am using Centos 6.6 Final and Qmail toaster,dovecot  on our
>>> server
>>>
>>> 2. We are using Outlook,Thunderbird and Squirrel webmail to access
>>> emails.
>>>
>>> 3. The help is need for some our senior people sent emails to clients.
>>> Those emails after their sent moved from their sent item folder to their
>>> local outlook files(Desktop storage) or removed from server.
>>>
>>> 4. I want to restrict to removed or moved emails from inbox and sent
>>> items folder
>>>
>>> 5. Does it any method to forward those emails to particular email
>>> account on server without their knowledge like Inbox forward option.
>>>
>>> 6. How to protect those emails.
>>>
>>> Could anyone help me.
>>>
>>> --
>>> *Thanks,*
>>> *Manikandan.C*
>>> *System Administrator*
>>>
>>
>
>
> --
> *Thanks,*
> *Manikandan.C*
> *System Administrator*
>
>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Dear Friends,
Thanks for your kind suggestion. My problem is our most Senior people used
their email account in their office Desktop(outlook),home(Outlook) and
handsets. If they want to moved emails from his inbox or Sent items
intentionally. How to retrieve those emails . If inbox emails we could make
forward option to create similar b...@domain.com email account to retrieve
that. The main problem is Sent items.
In blackberry server have one option autobcc if any one sent emails from
blackberry handset it will copy those sent items email to other account.
If possible to make similar function in server for particular users.  Then
we would recover those sent items emails.

Please share your thoughts and solution.

As per your advise if i use rsync option it will backup all emails with
mirror concept. but how do i get those emails from backup folder. Do i need
to restore any email account from rsync backup drive.

could any one give clear solution of my query.

Thanks,


On Sat, Sep 26, 2015 at 5:39 AM, AGM SOFT <agms...@gmail.com> wrote:

> Check-out expunge plugin for dovecot.
> It allows you to retain all deleted emails.
>
> AM
> Em 25/09/2015 09:36, "Chandran Manikandan" <tech2m...@gmail.com> escreveu:
>
>> Hi Friends,
>>
>> I need your help of my below.
>>
>> 1. Currently am using Centos 6.6 Final and Qmail toaster,dovecot  on our
>> server
>>
>> 2. We are using Outlook,Thunderbird and Squirrel webmail to access emails.
>>
>> 3. The help is need for some our senior people sent emails to clients.
>> Those emails after their sent moved from their sent item folder to their
>> local outlook files(Desktop storage) or removed from server.
>>
>> 4. I want to restrict to removed or moved emails from inbox and sent
>> items folder
>>
>> 5. Does it any method to forward those emails to particular email account
>> on server without their knowledge like Inbox forward option.
>>
>> 6. How to protect those emails.
>>
>> Could anyone help me.
>>
>> --
>> *Thanks,*
>> *Manikandan.C*
>> *System Administrator*
>>
>


-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to protect sent items email and Trash folder from users

[Chandran Manikandan]

Hi Friends,

I need your help of my below.

1. Currently am using Centos 6.6 Final and Qmail toaster,dovecot  on our
server

2. We are using Outlook,Thunderbird and Squirrel webmail to access emails.

3. The help is need for some our senior people sent emails to clients.
Those emails after their sent moved from their sent item folder to their
local outlook files(Desktop storage) or removed from server.

4. I want to restrict to removed or moved emails from inbox and sent items
folder

5. Does it any method to forward those emails to particular email account
on server without their knowledge like Inbox forward option.

6. How to protect those emails.

Could anyone help me.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped

[Chandran Manikandan]

Dear Eric,
I have changed configuration as you advised and monitored couple of days .
It was working fine now. Thanks a lot friends.

On Fri, Jul 24, 2015 at 6:36 PM, Chandran Manikandan tech2m...@gmail.com
wrote:

 Dear Eric,
 Thanks for your assist me. I have done your correction in local.conf and
 checked doveconf -n. It's shown the new settings. Let me track this issue
 another few more days. If still face the same issue then will update. If
 it's fixed also will update you. Thanks a lot Eric.

 On Fri, Jul 24, 2015 at 11:49 AM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  Chandran,

 Use 'doveconf -n' (NOT 'doveconf -d') which will show all the settings
 with NON-DEFAULT values.

 Dovecot operates off of the configuration files. You do NOT, or most
 likely shouldn't, have to reinstall Dovecot.

 I'll bet that when you run 'doveconf -n' you'll most likely see the
 current setting from local.conf.

 Eric




 On 7/23/2015 9:14 PM, Chandran Manikandan wrote:

 Dear Eric,
 Thanks for your help. I tried your  above advise and changed in
 local.conf file then i restarted the service dovecot restart. After restart
 the server i tried this command doveconf -d  still service count shows 1.
 FYR below.

  service imap-login {
   chroot = login
   client_limit = 0
   drop_priv_before_exec = no
   executable = imap-login
   extra_groups =
   group =
   idle_kill = 0
   inet_listener imap {
 address =
 port = 143
 reuse_port = no
 ssl = no
   }
   inet_listener imaps {
 address =
 port = 993
 reuse_port = no
 ssl = yes
   }
   privileged_group =
   process_limit = 0
   process_min_avail = 0
   protocol = imap
   service_count = 1
   type = login
   user = $default_login_user
   vsz_limit = 18446744073709551615 B
 }

  My changes in local.conf.

  service imap-login {
   service_count = 0
   #client_limit = $default_client_limit
   #process_min_avail = 0
   #vsz_limit = 64M
 }
 service pop3-login {
   service_count = 0
 }

  My 10-master.conf  under conf.d file below.

  service imap-login {
   inet_listener imap {
 # process_limit = 15
 # client_limit = 10740
 #port = 143
   }
   inet_listener imaps {
 #port = 993
 #ssl = yes
   }

# Number of connections to handle before starting a new process.
 Typically
   # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
   # is faster. doc/wiki/LoginProcess.txt
   #service_count = 1

# Number of processes to always keep waiting for more connections.
   #process_min_avail = 0

# If you set service_count=0, you probably need to grow this.
   #vsz_limit = $default_vsz_limit
 }

  service pop3-login {
   inet_listener pop3 {
 #port = 110
   }
   inet_listener pop3s {
 #port = 995
 #ssl = yes
   }
 }


  I think the problem is whatever change did in dovecot folder means
 local.conf or toaster.conf or 10-master.conf it's not overwrite in doveconf
 file that's why i couldn't fix this issue.

  Is any mismatch configuration there in dovecot package or qmailtoaster.

  Or do i reinstall the current dovecot toaster package will it fix this
 issue.

  Please advise it and help me.

  If i need to do reinstall kindly let me know the command procedures.
 Because this is live server and would not affect any email accounts or data.

  Please help me to resolve this issue.

 On Thu, Jul 23, 2015 at 7:45 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  Chandran,

 From the configuration you sent you have the following setting...

 service imap-login {
  .
 .
 .
   service_count = 1
 .
 .
 .
 }

 from http://wiki2.dovecot.org/LoginProcess

 It should be...

 service imap-login {
service_count = 0
 }

 For High-performance mode.

 And, I would not change any configuration file in /etc/dovecot/conf.d
 directory, make all your changes in local.conf

 In the above link, here's the High-Performance section:

 High-performance mode

 You can enable high-performance mode with:

 service imap-login {  service_count = 0  #client_limit = 
 $default_client_limit  #process_min_avail = 0  #vsz_limit = 64M}service 
 pop3-login {  service_count = 0}

  It works by using a number of long running login processes, each
 handling a number of connections. This loses much of the security benefits
 of the login process design, because in case of a security hole (in Dovecot
 or SSL library) the attacker is now able to see other users logging in and
 steal their passwords, read their mails, etc.

-

process_min_avail should be set to be at least the number of CPU
cores in the system, so that all of them will be used.
 - Otherwise new processes are created only once an existing one's
connection count reaches client_limit
- Default client_limit * process_limit = 1000*100 = 100k connections
- vsz_limit should be increased to avoid out of memory errors,
especially if you're using SSL/TLS.



 Eric



 On 7/23/2015 1:01 AM, Chandran Manikandan wrote:

  Dear Eric,
 Please find

Re: [qmailtoaster] master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped

[Chandran Manikandan]

Dear Eric,
Thanks for your assist me. I have done your correction in local.conf and
checked doveconf -n. It's shown the new settings. Let me track this issue
another few more days. If still face the same issue then will update. If
it's fixed also will update you. Thanks a lot Eric.

On Fri, Jul 24, 2015 at 11:49 AM, Eric Broch ebr...@whitehorsetc.com
wrote:

  Chandran,

 Use 'doveconf -n' (NOT 'doveconf -d') which will show all the settings
 with NON-DEFAULT values.

 Dovecot operates off of the configuration files. You do NOT, or most
 likely shouldn't, have to reinstall Dovecot.

 I'll bet that when you run 'doveconf -n' you'll most likely see the
 current setting from local.conf.

 Eric




 On 7/23/2015 9:14 PM, Chandran Manikandan wrote:

 Dear Eric,
 Thanks for your help. I tried your  above advise and changed in local.conf
 file then i restarted the service dovecot restart. After restart the server
 i tried this command doveconf -d  still service count shows 1. FYR below.

  service imap-login {
   chroot = login
   client_limit = 0
   drop_priv_before_exec = no
   executable = imap-login
   extra_groups =
   group =
   idle_kill = 0
   inet_listener imap {
 address =
 port = 143
 reuse_port = no
 ssl = no
   }
   inet_listener imaps {
 address =
 port = 993
 reuse_port = no
 ssl = yes
   }
   privileged_group =
   process_limit = 0
   process_min_avail = 0
   protocol = imap
   service_count = 1
   type = login
   user = $default_login_user
   vsz_limit = 18446744073709551615 B
 }

  My changes in local.conf.

  service imap-login {
   service_count = 0
   #client_limit = $default_client_limit
   #process_min_avail = 0
   #vsz_limit = 64M
 }
 service pop3-login {
   service_count = 0
 }

  My 10-master.conf  under conf.d file below.

  service imap-login {
   inet_listener imap {
 # process_limit = 15
 # client_limit = 10740
 #port = 143
   }
   inet_listener imaps {
 #port = 993
 #ssl = yes
   }

# Number of connections to handle before starting a new process.
 Typically
   # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
   # is faster. doc/wiki/LoginProcess.txt
   #service_count = 1

# Number of processes to always keep waiting for more connections.
   #process_min_avail = 0

# If you set service_count=0, you probably need to grow this.
   #vsz_limit = $default_vsz_limit
 }

  service pop3-login {
   inet_listener pop3 {
 #port = 110
   }
   inet_listener pop3s {
 #port = 995
 #ssl = yes
   }
 }


  I think the problem is whatever change did in dovecot folder means
 local.conf or toaster.conf or 10-master.conf it's not overwrite in doveconf
 file that's why i couldn't fix this issue.

  Is any mismatch configuration there in dovecot package or qmailtoaster.

  Or do i reinstall the current dovecot toaster package will it fix this
 issue.

  Please advise it and help me.

  If i need to do reinstall kindly let me know the command procedures.
 Because this is live server and would not affect any email accounts or data.

  Please help me to resolve this issue.

 On Thu, Jul 23, 2015 at 7:45 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  Chandran,

 From the configuration you sent you have the following setting...

 service imap-login {
  .
 .
 .
   service_count = 1
 .
 .
 .
 }

 from http://wiki2.dovecot.org/LoginProcess

 It should be...

 service imap-login {
service_count = 0
 }

 For High-performance mode.

 And, I would not change any configuration file in /etc/dovecot/conf.d
 directory, make all your changes in local.conf

 In the above link, here's the High-Performance section:

 High-performance mode

 You can enable high-performance mode with:

 service imap-login {  service_count = 0  #client_limit = 
 $default_client_limit  #process_min_avail = 0  #vsz_limit = 64M}service 
 pop3-login {  service_count = 0}

  It works by using a number of long running login processes, each
 handling a number of connections. This loses much of the security benefits
 of the login process design, because in case of a security hole (in Dovecot
 or SSL library) the attacker is now able to see other users logging in and
 steal their passwords, read their mails, etc.

-

process_min_avail should be set to be at least the number of CPU
cores in the system, so that all of them will be used.
 - Otherwise new processes are created only once an existing one's
connection count reaches client_limit
- Default client_limit * process_limit = 1000*100 = 100k connections
- vsz_limit should be increased to avoid out of memory errors,
especially if you're using SSL/TLS.



 Eric



 On 7/23/2015 1:01 AM, Chandran Manikandan wrote:

  Dear Eric,
 Please find the attached file FYR . please check and help me to resolve
 it.

 On Wed, Jul 22, 2015 at 8:21 PM, Eric Broch  ebr...@whitehorsetc.com
 ebr...@whitehorsetc.com wrote:


 Look here  http://wiki2.dovecot.org/LoginProcess


 On 7/22

Re: [qmailtoaster] master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped

[Chandran Manikandan]

Dear Eric,
Thanks for your help. I tried your  above advise and changed in local.conf
file then i restarted the service dovecot restart. After restart the server
i tried this command doveconf -d  still service count shows 1. FYR below.

service imap-login {
  chroot = login
  client_limit = 0
  drop_priv_before_exec = no
  executable = imap-login
  extra_groups =
  group =
  idle_kill = 0
  inet_listener imap {
address =
port = 143
reuse_port = no
ssl = no
  }
  inet_listener imaps {
address =
port = 993
reuse_port = no
ssl = yes
  }
  privileged_group =
  process_limit = 0
  process_min_avail = 0
  protocol = imap
  service_count = 1
  type = login
  user = $default_login_user
  vsz_limit = 18446744073709551615 B
}

My changes in local.conf.

service imap-login {
  service_count = 0
  #client_limit = $default_client_limit
  #process_min_avail = 0
  #vsz_limit = 64M
}
service pop3-login {
  service_count = 0
}

My 10-master.conf  under conf.d file below.

service imap-login {
  inet_listener imap {
# process_limit = 15
# client_limit = 10740
#port = 143
  }
  inet_listener imaps {
#port = 993
#ssl = yes
  }

  # Number of connections to handle before starting a new process. Typically
  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
  # is faster. doc/wiki/LoginProcess.txt
  #service_count = 1

  # Number of processes to always keep waiting for more connections.
  #process_min_avail = 0

  # If you set service_count=0, you probably need to grow this.
  #vsz_limit = $default_vsz_limit
}

service pop3-login {
  inet_listener pop3 {
#port = 110
  }
  inet_listener pop3s {
#port = 995
#ssl = yes
  }
}


I think the problem is whatever change did in dovecot folder means
local.conf or toaster.conf or 10-master.conf it's not overwrite in doveconf
file that's why i couldn't fix this issue.

Is any mismatch configuration there in dovecot package or qmailtoaster.

Or do i reinstall the current dovecot toaster package will it fix this
issue.

Please advise it and help me.

If i need to do reinstall kindly let me know the command procedures.
Because this is live server and would not affect any email accounts or data.

Please help me to resolve this issue.

On Thu, Jul 23, 2015 at 7:45 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  Chandran,

 From the configuration you sent you have the following setting...

 service imap-login {
  .
 .
 .
   service_count = 1
 .
 .
 .
 }

 from http://wiki2.dovecot.org/LoginProcess

 It should be...

 service imap-login {
service_count = 0
 }

 For High-performance mode.

 And, I would not change any configuration file in /etc/dovecot/conf.d
 directory, make all your changes in local.conf

 In the above link, here's the High-Performance section:

 High-performance mode

 You can enable high-performance mode with:

 service imap-login {  service_count = 0  #client_limit = 
 $default_client_limit  #process_min_avail = 0  #vsz_limit = 64M}service 
 pop3-login {  service_count = 0}

  It works by using a number of long running login processes, each
 handling a number of connections. This loses much of the security benefits
 of the login process design, because in case of a security hole (in Dovecot
 or SSL library) the attacker is now able to see other users logging in and
 steal their passwords, read their mails, etc.

-

process_min_avail should be set to be at least the number of CPU cores
in the system, so that all of them will be used.
 - Otherwise new processes are created only once an existing one's
connection count reaches client_limit
- Default client_limit * process_limit = 1000*100 = 100k connections
- vsz_limit should be increased to avoid out of memory errors,
especially if you're using SSL/TLS.



 Eric



 On 7/23/2015 1:01 AM, Chandran Manikandan wrote:

 Dear Eric,
 Please find the attached file FYR . please check and help me to resolve it.

 On Wed, Jul 22, 2015 at 8:21 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:


 Look here  http://wiki2.dovecot.org/LoginProcess


 On 7/22/2015 3:56 AM, Chandran Manikandan wrote:

  Dear Friends,
 I have faced below issues since two weeks to till now. Could anyone help
 me to rectify this issue.

  Below message retrieve from logs and getting disconnection from Outlook
 and other email clients.

  Error Message

  master: Warning: service(imap-login): process_limit (100) reached,
 client connections are being dropped

  My local.conf from dovecot folder

  protocol imap {
   imap_client_workarounds = delay-newmail
   mail_max_userip_connections = 20
 default_process_limit = 300
 }

  10-master.conf

  default_process_limit = 300
 default_client_limit = 1000

  service imap-login {
   inet_listener imap {
 # process_limit = 15
 # client_limit = 300
  #port = 143
}
   protocol imap {process_limit = 300}

  Please check above config. I have modified in dovecot folder but
 doesn't reflect

Re: [qmailtoaster] master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped

[Chandran Manikandan]

Dear Eric,
Please find the attached file FYR . please check and help me to resolve it.

On Wed, Jul 22, 2015 at 8:21 PM, Eric Broch ebr...@whitehorsetc.com wrote:


 Look here  http://wiki2.dovecot.org/LoginProcess


 On 7/22/2015 3:56 AM, Chandran Manikandan wrote:

  Dear Friends,
 I have faced below issues since two weeks to till now. Could anyone help
 me to rectify this issue.

  Below message retrieve from logs and getting disconnection from Outlook
 and other email clients.

  Error Message

  master: Warning: service(imap-login): process_limit (100) reached,
 client connections are being dropped

  My local.conf from dovecot folder

  protocol imap {
   imap_client_workarounds = delay-newmail
   mail_max_userip_connections = 20
 default_process_limit = 300
 }

  10-master.conf

  default_process_limit = 300
 default_client_limit = 1000

  service imap-login {
   inet_listener imap {
 # process_limit = 15
 # client_limit = 300
  #port = 143
}
   protocol imap {process_limit = 300}

  Please check above config. I have modified in dovecot folder but doesn't
 reflect the server. Is there anything in toaster issue. could any one help
 me to solve it.

  My server toaster is dovecot-2.2.7-0.qt.el6.i686
 Server is Centos 6.6



  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*





-- 
*Thanks,*
*Manikandan.C*
*System Administrator*


doveconf.bak
Description: Binary data
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped

[Chandran Manikandan]

Dear Friends,
I have faced below issues since two weeks to till now. Could anyone help me
to rectify this issue.

Below message retrieve from logs and getting disconnection from Outlook and
other email clients.

Error Message

master: Warning: service(imap-login): process_limit (100) reached, client
connections are being dropped

My local.conf from dovecot folder

protocol imap {
  imap_client_workarounds = delay-newmail
  mail_max_userip_connections = 20
   default_process_limit = 300
}

10-master.conf

default_process_limit = 300
default_client_limit = 1000

service imap-login {
  inet_listener imap {
# process_limit = 15
# client_limit = 300
#port = 143
  }
protocol imap {process_limit = 300}

Please check above config. I have modified in dovecot folder but doesn't
reflect the server. Is there anything in toaster issue. could any one help
me to solve it.

My server toaster is dovecot-2.2.7-0.qt.el6.i686
Server is Centos 6.6



-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped

[Chandran Manikandan]

}

service auth {
  # auth_socket_path points to this userdb socket by default. It's typically
  # used by dovecot-lda, doveadm, possibly imap process, etc. Users that
have
  # full permissions to this socket are able to get a list of all usernames
and
  # get the results of everyone's userdb lookups.
  #
  # The default 0666 mode allows anyone to connect to the socket, but the
  # userdb lookups will succeed only if the userdb returns an uid field
that
  # matches the caller process's UID. Also if caller's uid or gid matches
the
  # socket's uid or gid the lookup succeeds. Anything else causes a failure.
  #
  # To give the caller full permissions to lookup all users, set the mode to
  # something else than 0666 and Dovecot lets the kernel enforce the
  # permissions (e.g. 0777 allows everyone full permissions).
  unix_listener auth-userdb {

 #mode = 0666
#user =
#group =
  }

  # Postfix smtp-auth
  #unix_listener /var/spool/postfix/private/auth {
  #  mode = 0666
  #}

  # Auth process is run as this user.
  #user = $default_internal_user
}

service auth-worker {
  # Auth worker process is run as root by default, so that it can access
  # /etc/shadow. If this isn't necessary, the user should be changed to
  # $default_internal_user.
  #user = root
}

service dict {
  # If dict proxy is used, mail processes should have access to its socket.
  # For example: mode=0660, group=vmail and global mail_access_groups=vmail
  unix_listener dict {
#mode = 0600
#user =
#group =
  }
}











On Wed, Jul 22, 2015 at 8:38 PM, Edwin C ecasim...@hotmail.com wrote:

  That happened to me.

 You need to change the configuration of dovecot to break the 100 process
 limit.
  On Jul 22, 2015 8:22 PM, Eric Broch ebr...@whitehorsetc.com wrote:

 Look here  http://wiki2.dovecot.org/LoginProcess

 On 7/22/2015 3:56 AM, Chandran Manikandan wrote:

  Dear Friends,
 I have faced below issues since two weeks to till now. Could anyone help
 me to rectify this issue.

  Below message retrieve from logs and getting disconnection from Outlook
 and other email clients.

  Error Message

  master: Warning: service(imap-login): process_limit (100) reached,
 client connections are being dropped

  My local.conf from dovecot folder

  protocol imap {
   imap_client_workarounds = delay-newmail
   mail_max_userip_connections = 20
 default_process_limit = 300
 }

  10-master.conf

  default_process_limit = 300
 default_client_limit = 1000

  service imap-login {
   inet_listener imap {
 # process_limit = 15
 # client_limit = 300
  #port = 143
}
   protocol imap {process_limit = 300}

  Please check above config. I have modified in dovecot folder but doesn't
 reflect the server. Is there anything in toaster issue. could any one help
 me to solve it.

  My server toaster is dovecot-2.2.7-0.qt.el6.i686
 Server is Centos 6.6



  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*





-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] ClamAV update

[Chandran Manikandan]

Hi Eric,
Thanks for your link. I have tried in my COS6 64 bit machine as you
mentioned above commands. but it's not installed successfully and come
below message. could you look at this give the correct steps.

i have try first this rpmbuild --rebuild --define dist .qt.el6
clamav-0.98.6-1.qt.src.rpm  then below error

error: cannot open clamav-0.98.6-1.qt.src.rpm: No such file or directory

Then i try like this  rpmbuild --rebuild --define dist .qt.el6
clamav-0.98.6-1.qt.el6.x86_64.rpm then below error got

Installing clamav-0.98.6-1.qt.el6.x86_64.rpm
error: source package expected, binary found
error: clamav-0.98.6-1.qt.el6.x86_64.rpm cannot be installed

On Thu, Apr 9, 2015 at 9:37 AM, Eric Broch ebr...@whitehorsetc.com wrote:

  Chandran,

 x86_64 rpm:

 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/clamav-0.98.6-1.qt.el6.x86_64.rpm

 I don't have the i386 rpm just the srpm:

 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/srpms/clamav-0.98.6-1.qt.src.rpm

 build it as follows:
 rpmbuild --rebuild --define dist .qt.el6 clamav-0.98.6-1.qt.src.rpm

 If you send me the i386 rpm I'll put it up on my ftp site.

 Thanks!

 EricB


 On 4/7/2015 4:20 AM, Chandran Manikandan wrote:

 Hi Friends,

  I am running Centos 6.5 64 bit and Centos 6.6. 32 bit machine. Would
 like to know to update Clamav latest release on both machine. could anyone
 have experience with out any issue.

  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*





-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] ClamAV update

[Chandran Manikandan]

Hi Friends,

I am running Centos 6.5 64 bit and Centos 6.6. 32 bit machine. Would like
to know to update Clamav latest release on both machine. could anyone have
experience with out any issue.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to fix this issue dovecot in new realease Maximum connection

[Chandran Manikandan]

Thank you Eric,
I have tried your settings . It's working fine now.

On Wed, Mar 25, 2015 at 9:00 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  Chandran,

 Look here  http://wiki2.dovecot.org/LoginProcess

 There are two modes: high security and high performance. I went with high
 performance. It fixed my issues

 Eric



 On 3/25/2015 12:44 AM, Chandran Manikandan wrote:

 Hi Eric,
 Thanks . I have used 100 IMAP accounts on my server and almost 50 email
 accounts used multiple devices like smartphone,tablet,laptop,desktop in
 each email account. Would it resolve my issue . or do i need to do any
 other settings .

 On Wed, Mar 25, 2015 at 1:29 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  I bumped the default_process_limit on one of my servers to 150
 In /etc/dovecot/local.conf I enter the following settings:

 mail_max_userip_connections = 20
 default_process_limit = 150


 On 3/24/2015 10:31 PM, Chandran Manikandan wrote:

 Dear All,

  I am running Centos 6.6 with new QMailtoaster release on my machine.
 Suddenly i got below issue in my email clients.

  In Thunderbird

  -Unable to connect your imap server.you may have exceed the maximum
 number of connection to this server.

  In Outlook
 -- Frequently disconnected the server

  Then i have checked dovecot log it's show below message.

  Server log.
  master: Warning: service(imap-login): process_limit (100) reached,
 client connections are being dropped

  could anyone help me to resolve this issue.

  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*





  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*





-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to fix this issue dovecot in new realease Maximum connection

[Chandran Manikandan]

Hi Eric,
Thanks . I have used 100 IMAP accounts on my server and almost 50 email
accounts used multiple devices like smartphone,tablet,laptop,desktop in
each email account. Would it resolve my issue . or do i need to do any
other settings .

On Wed, Mar 25, 2015 at 1:29 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  I bumped the default_process_limit on one of my servers to 150
 In /etc/dovecot/local.conf I enter the following settings:

 mail_max_userip_connections = 20
 default_process_limit = 150


 On 3/24/2015 10:31 PM, Chandran Manikandan wrote:

 Dear All,

  I am running Centos 6.6 with new QMailtoaster release on my machine.
 Suddenly i got below issue in my email clients.

  In Thunderbird

  -Unable to connect your imap server.you may have exceed the maximum
 number of connection to this server.

  In Outlook
 -- Frequently disconnected the server

  Then i have checked dovecot log it's show below message.

  Server log.
  master: Warning: service(imap-login): process_limit (100) reached, client
 connections are being dropped

  could anyone help me to resolve this issue.

  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*





-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to fix this issue dovecot in new realease Maximum connection

[Chandran Manikandan]

Dear All,

I am running Centos 6.6 with new QMailtoaster release on my machine.
Suddenly i got below issue in my email clients.

In Thunderbird

-Unable to connect your imap server.you may have exceed the maximum number
of connection to this server.

In Outlook
-- Frequently disconnected the server

Then i have checked dovecot log it's show below message.

Server log.
 master: Warning: service(imap-login): process_limit (100) reached, client
connections are being dropped

could anyone help me to resolve this issue.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Recall issue on the email

[Chandran Manikandan]

Dear All,

I have using Qmailtoaster on centos 6.6 .
Our uses are using Outlook and thunderbird client to access emails.
One of our users tried to send email to wrong person by mistake and need to
recall that message through email client.
I have tried this option in outlook 2013,2010,2003 but it won't work out.
So how to recall this message from email client
Or any other option to stop this message from server or email client.
Could any one help .

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Webmail issue

[Chandran Manikandan]

Dear All,

I am running Qmailtoaster with squirrelmail toaster on Centos 6.6 32 bit
machine .
Our users facing the webmail issue while they tried to forward or reply to
the received email.
When they try to send reply the body of the contents not displayed on the
body section in webmail using Google chrome, IE 11 and firefox .
I have try to setup default display in HTML format in options menu still
the same problem facing .
PHP packages below running on my system.

php55w-5.5.20-1.w6.i386
php55w-pdo-5.5.20-1.w6.i386
php55w-cli-5.5.20-1.w6.i386
php55w-mysql-5.5.20-1.w6.i386
php55w-common-5.5.20-1.w6.i386
php55w-gd-5.5.20-1.w6.i386
php55w-xml-5.5.20-1.w6.i386
php55w-pear-1.9.4-7.w6.noarch

Squirrelmail toaster is  squirrelmail-1.4.22-0.qt.el6.i686

Could any one help me to resolve this issue.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to see the spamdyke log in centos 6.6 32 bit with new Qmailtoaster

[Chandran Manikandan]

Hi All,

i couldn't receive email from sender . then i had the syslog like that. so
how to fix this issue. I think this is because of spamdyke.

I have blocked one email on spamassassin but still i receive email from
that sender . so how to fix this issue .

On Thu, Jan 29, 2015 at 6:28 PM, Chandran Manikandan tech2m...@gmail.com
wrote:

 Hi,

 Yes, I have found the spamdyke log from syslog  /var/log/maillog and got
 this error.

 On Wed, Jan 28, 2015 at 7:12 PM, Finn Buhelt f...@kirstineslund.dk
 wrote:

 Hi Chandran.

 Have a look at the below partly inserted mail from  Eric 'Shubes' dated
 July 2014 to explain :


 
 Services are being changed to use standard mechanisms. This will
 eventually make daemontools and ucspi-tcp packages unnecessary.

 Dovecot has replaced pop3, imap and auth services formerly run by
 supervise. You can do service dovecot status to check on it. Its log
 messages are in the /var/log/dovecot.log file.

 clamd now also runs as a normal service (service clamd status). Its
 messages are now in /var/log/maillog along with vpopmail messages which
 have been there all along. This is the standard mail log location for
 syslog.

 Note, spamassassin will also be updated soon to run as a normal service
 and use syslog, so its messages will also be in /var/log/maillog at that
 time.

 The next spamdyke will also send log messages to syslog. This will
 require a simple manual configuration change though, as the spamdyke
 configuration file is set up as config(noreplace).

 These changes are in preparation for using systemd in CentOS7, as well as
 an ELK (ElasticSearch-Logstash-Kibana) stack that will be forthcoming
 for QMT.

 

 END OF MAIL


 Hope it helps ?

 /Cheers
 Finn

 Den 28-01-2015 kl. 11:34 skrev Chandran Manikandan:

 Hi All,

 I have below issue. One of our friend send email to me . but couldn't
 receive that email on my mailbox then i went to check the mail log it's
 shows below message.

 DENIED_OTHER from: exam...@gmail.com mailto:exam...@gmail.com to:
 exam...@panasiagroup.net mailto:exam...@panasiagroup.net origin_ip:
 202.40.249.108 origin_rdns: r08.singnet.com.sg
 http://r08.singnet.com.sg auth: (unknown) encryptio
 n: (none) reason: 503_MAIL_first_(#5.5.1)

 I am able to see the qmail log only smtp,send,submission folders under
 the qmail folder and couldn't see the spamd folder.

 Could anyone help me to resolve this issue.

 --
 *Thanks,*
 *Manikandan.C*
 *System Administrator*


 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




 --
 *Thanks,*
 *Manikandan.C*
 *System Administrator*




-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to see the spamdyke log in centos 6.6 32 bit with new Qmailtoaster

[Chandran Manikandan]

Hi,

Yes, I have found the spamdyke log from syslog  /var/log/maillog and got
this error.

On Wed, Jan 28, 2015 at 7:12 PM, Finn Buhelt f...@kirstineslund.dk wrote:

 Hi Chandran.

 Have a look at the below partly inserted mail from  Eric 'Shubes' dated
 July 2014 to explain :


 
 Services are being changed to use standard mechanisms. This will
 eventually make daemontools and ucspi-tcp packages unnecessary.

 Dovecot has replaced pop3, imap and auth services formerly run by
 supervise. You can do service dovecot status to check on it. Its log
 messages are in the /var/log/dovecot.log file.

 clamd now also runs as a normal service (service clamd status). Its
 messages are now in /var/log/maillog along with vpopmail messages which
 have been there all along. This is the standard mail log location for
 syslog.

 Note, spamassassin will also be updated soon to run as a normal service
 and use syslog, so its messages will also be in /var/log/maillog at that
 time.

 The next spamdyke will also send log messages to syslog. This will require
 a simple manual configuration change though, as the spamdyke configuration
 file is set up as config(noreplace).

 These changes are in preparation for using systemd in CentOS7, as well as
 an ELK (ElasticSearch-Logstash-Kibana) stack that will be forthcoming for
 QMT.

 

 END OF MAIL


 Hope it helps ?

 /Cheers
 Finn

 Den 28-01-2015 kl. 11:34 skrev Chandran Manikandan:

 Hi All,

 I have below issue. One of our friend send email to me . but couldn't
 receive that email on my mailbox then i went to check the mail log it's
 shows below message.

 DENIED_OTHER from: exam...@gmail.com mailto:exam...@gmail.com to:
 exam...@panasiagroup.net mailto:exam...@panasiagroup.net origin_ip:
 202.40.249.108 origin_rdns: r08.singnet.com.sg
 http://r08.singnet.com.sg auth: (unknown) encryptio
 n: (none) reason: 503_MAIL_first_(#5.5.1)

 I am able to see the qmail log only smtp,send,submission folders under
 the qmail folder and couldn't see the spamd folder.

 Could anyone help me to resolve this issue.

 --
 *Thanks,*
 *Manikandan.C*
 *System Administrator*


 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] How to resolve this bad attachment bounce message

[Chandran Manikandan]

Hi All,
How to fix this issue. Still am facing this issue.

On Fri, Jan 23, 2015 at 3:08 PM, ChandranManikandan kand...@gmail.com
wrote:

 Hi ,
 Thanks for your advise. Could you give me the steps for compilation.

 On Thu, Jan 22, 2015 at 11:57 PM, Johannes Weberhofer 
 jweberho...@weberhofer.at wrote:

 Am 22.01.2015 um 09:11 schrieb ChandranManikandan:

 Hi Johannes,
 I have removed .cmd then it's working fine now. How to resolve this
 issue without remove this exension in simcontrol.



 You might try to compile my version of simscan from
 https://github.com/qmail/simscan . This version fixes several issues -
 today I have included the mentioned patch; I currently do not have time to
 test it, but I see no problem with the patch.

 I don't know, which version of ripmime you are using, but it could be
 version 1.4.0.10 solves that issue.

 Johannes



 On Thu, Jan 22, 2015 at 5:44 AM, Johannes Weberhofer 
 jweberho...@weberhofer.at mailto:jweberho...@weberhofer.at wrote:

 Did you see http://comments.gmane.org/__
 gmane.mail.qmail.simscan/3879 http://comments.gmane.org/
 gmane.mail.qmail.simscan/3879 ?

 Am 21.01.15 um 04:54 schrieb ChandranManikandan:

 i couldn't receive any answer this.

 My databytes are : 10485760

 On Wed, Jan 21, 2015 at 2:02 AM, Jim Shupert 
 jshup...@pps-inc.com mailto:jshup...@pps-inc.com mailto:
 jshup...@pps-inc.com mailto:jshup...@pps-inc.com wrote:

  Chandran

  did you ever find an awnser?

  is it in

  /var/qmail/control/databytes

  ?



  On 1/20/2015 6:18 AM, ChandranManikandan wrote:

  Hi All,

  I have installed Centos 6.6 and installed QMT
 successfully.

  But if we try to send word documents emails to our
 internal domain it's getting bounce back with this below message. .

  554 Your email was rejected because it contains a bad
 attachment: d

  Simcontrol config below.


  :clam=yes,spam=yes,spam_hits=_
 _12,attach=.mp3:.src:.cmd:.bat:__.pif:.exe:.chm:.com:.
 dll:.dot:__.email:.hlp:.hta:.inf:.msi:.__reg:.scr:.url:.
 vbs:.mpeg:.zip:__.7z

  Could anyone help me.

  --
  */Thanks  Best Regards,
  Manikandan.C
  /*





 --
 */Thanks  Best Regards,
 Manikandan.C
 /*


 --
 Johannes Weberhofer
 Weberhofer GmbH, Austria, Vienna

 --__
 --__-
 To unsubscribe, e-mail: qmailtoaster-list-unsubscribe@__
 qmailtoaster.com mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-help@__qmail
 toaster.com mailto:qmailtoaster-list-h...@qmailtoaster.com




 --
 */Thanks  Best Regards,
 Manikandan.C
 /*


 --
 Johannes Weberhofer
 Weberhofer GmbH, Austria, Vienna

 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




 --


 *Thanks  Best Regards,Manikandan.C*




-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to see the spamdyke log in centos 6.6 32 bit with new Qmailtoaster

[Chandran Manikandan]

Hi All,

I have below issue. One of our friend send email to me . but couldn't
receive that email on my mailbox then i went to check the mail log it's
shows below message.

DENIED_OTHER from: exam...@gmail.com to: exam...@panasiagroup.net
origin_ip:
202.40.249.108 origin_rdns: r08.singnet.com.sg auth: (unknown) encryptio
n: (none) reason: 503_MAIL_first_(#5.5.1)

I am able to see the qmail log only smtp,send,submission folders under the
qmail folder and couldn't see the spamd folder.

Could anyone help me to resolve this issue.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to fix this spamdyke report script

[Chandran Manikandan]

Hi All,

I have run this file on my server with this command but i got the error.
how to fix hi

Coomand:   #  ./spamdkye-stats-report.pl

Error:  Uncaught exception from user code:
No such file or directory at ./spamdkye-stats-report.pl line 74.
 at ./spamdkye-stats-report.pl line 74


In this script of 74 line should like this :  open TempFileRaw,
$TempFile.raw or die $!;

Could anyone help me.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] How to modified the qt-backup script.

[Chandran Manikandan]

Hi All,

I have run Qmailtoaster on Centos 6.6.

I did qt-backup script and result come below. Here it's came all backup
with individual zip file and consolidated to one backup file. So how to
avoid this . I was used on Centos 5.5 qtp-backup and got  Backup.tar.gz
file only but this new script come with two times. Could anyone help me .

Please see the attachment of my backup files.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] How to modified the qt-backup script.

[Chandran Manikandan]

 you post the script?



 On 1/22/2015 2:19 AM, Chandran Manikandan wrote:

 Hi All,

  I have run Qmailtoaster on Centos 6.6.

  I did qt-backup script and result come below. Here it's came all backup
 with individual zip file and consolidated to one backup file. So how to
 avoid this . I was used on Centos 5.5 qtp-backup and got  Backup.tar.gz
 file only but this new script come with two times. Could anyone help me .

  Please see the attachment of my backup files.

  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*


 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com





-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

Re: [qmailtoaster] Clamav Upgrade on Centos 6.6

[Chandran Manikandan]

Thank you Eric. It's working now.

On Wed, Jan 14, 2015 at 11:04 PM, Eric Broch ebr...@whitehorsetc.com
wrote:

  On 1/14/2015 8:01 AM, Eric Broch wrote:

 On 1/14/2015 2:57 AM, Chandran Manikandan wrote:

 Hi All,

  I have installed Qmailtoaster on this machine and after that if i run
 this command freshclam it's shown clamav outdated. How to update new clamav
 release on this machine. I hope anyone could help me.

  --
  *Thanks,*
 *Manikandan.C*
 *System Administrator*

 Chandran,

 It looks like you can use the qmailtoaster 'testing' repo to install it.
 When using yum you'll 'enablerepo testing' ( I can't remember the command
 specifically).

 Eric

 Chandran,

 Here's the proper command:

 # yum --enablerepo=qmailtoaster-testing update clamav

 Eric




-- 
*Thanks,*
*Manikandan.C*
*System Administrator*

[qmailtoaster] Clamav Upgrade on Centos 6.6

[Chandran Manikandan]

Hi All,

I have installed Qmailtoaster on this machine and after that if i run this
command freshclam it's shown clamav outdated. How to update new clamav
release on this machine. I hope anyone could help me.

-- 
*Thanks,*
*Manikandan.C*
*System Administrator*