[qubes-users] Boot hold after update

['A E' via qubes-users]

I've been trying to install Qubes on an external hard drive to test it 
out but I've ran into an issue. I've followed this guide 
 
since it's the same laptop I have (System76 Darter Pro).


I changed out the wifi card and was able to run the updates in dom0:

sudo qubes-dom0-update kernel-latest

sudo qubes-dom0-update kernel-latest-qubes-vm

After each update, I restart my computer and then set the new kernel to 
current (5.9.14-1 in both the kernel and vm). However, after I update 
the vm I'm prompted for another update to dom0 and the whonix gateway 
template. I run those, and restart my computer and that's where I run 
into problems.


I'm prompted to input my decryption password in a GUI that's showing a 
progress bar for the boot process, and then it takes me out of the GUI 
into a "Started Accounts Services" list and continues to try and boot 
until it says "Starting Hold until boot proce
ss finishes up..." and it 
will just sit there for as long as I'll let it. I'm unable to 
Ctrl+Alt+F2 or Ctrl+Alt+F1 into a terminal or GUI, or interact with it 
in any way (no cursor, typing, etc.). Reboots don't fix it.


I tried a fresh install after the first time this happened and followed 
the same steps, and the same thing happened. I tried searching but 
couldn't find anything to try. Any help is greatly appreciated!


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/9cefcf3d-de68-d465-8add-3dabcd320065%40protonmail.com.


publickey - alternate_empire@protonmail.com - 49e70c72.asc
Description: application/pgp-keys


signature.asc
Description: OpenPGP digital signature

Re: [qubes-users] How many CPU threads is recommended for Qubes OS ?

[A E]

tir. 31. mar. 2020 kl. 19.29 skrev Stumpy :

> On 2019-11-09 01:46, M wrote:
> > How many CPU threads is recommended for Qubes OS ?
> >
> > Is 4 enough, or should I go for 8 or more... ?
> >
> > I have bought the Ryzen 3 3200G, but I could change it for another one
> with more threads (for example the Ryzen 3400G), if it is recommended as I
> haven’t unpacked it yet.
> >
>
> Hi, did you get any responses to this? I am looking to build a new(ish)
> Qubes computer so clarity on this would be useful.
>

No, but it seems that Qubes OS 4.0.3 doesn’t work with the Ryzen  3 3200G
(I think the last time I tried was in the end of January or in the
beginning of February 2020). You will have to try with the 4.1 version that
is currently under development. Or choose an older AMD processor or an
Intel processor instead. Or wait to use Qubes OS until a stable version of
4.1 comes out.

When it comes to the amount of threads - more is better than less, of
cause. And it will probably depend on what you’re going to use the PC for.
As I haven’t been able to run Qubes on the PC with the Ryzen 3 3200G CPU
yet, I can’t say anything about how well Qubes OS will run with this CPU,
for now.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUHMH7C7yoXk6kN0N03VoOR8%2Bga6nR3SvnXjpzFKUpsDWQ%40mail.gmail.com.

Re: [qubes-users] Is it possible to get an app like WinAuth for Linux or what do you use for 2 step verification ?

[A E]

søn. 8. mar. 2020 kl. 00.58 skrev :

> On Sat, Mar 07, 2020 at 03:08:13PM -0800, A wrote:
> > Is it possible to get an app like WinAuth for Linux or what do you use
> > for 2 step verification ?
>
> https://www.qubes-os.org/doc/multifactor-authentication/
>
>
>
>

Thanks.

Does Qubes OS 4.0.3 come with a minimal Template VM preinstalled, or do I
have to set it up myself first ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUHybF2oiDa5-9UNwXLLzTjXO-kO%2BhqyE6jQUYrnR%3DjGpA%40mail.gmail.com.

Re: [qubes-users] How to change the keys for secure copy and paste between VM’s ?

[A E]

lør. 7. mar. 2020 kl. 15.30 skrev A E :

> tor. 27. feb. 2020 kl. 17.00 skrev A E :
>
>> tir. 25. feb. 2020 kl. 18.31 skrev A :
>>
>>> How to change the keys for secure copy and paste between VM’s ?
>>>
>>> I have tried to change the keys in this file: etc/qubes/guid.conf to
>>> Ctrl + Alt + C  and  Crtl + Alt + V  But that didn’t work. Maybe because it
>>> isn’t possible to use the Alt key here as it isn’t listed as a “valid
>>> modifier key name” according to the text in the file.
>>>
>>> As my dom0 both uses the Ctrl + Shift and Ctrl + Win combination to
>>> something different, I need to change the combination for secure copy and
>>> paste. How do I do that ?
>>>
>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "qubes-users" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/qubes-users/PjYgZxTiKT0/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> qubes-users+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/qubes-users/91285191-fef9-4032-8226-41dffd149ce0%40googlegroups.com
>>> .
>>>
>>
>>
>> According to the following page, it should be possible to change the keys
>> used for secure copy and paste text between different domains:
>>
>> https://www.qubes-os.org/doc/copy-paste/#shortcut-configuration
>>
>> But now I have tried to change the keys for secure copy and paste to
>> “Shift-Mod4-C” and “Shift-Mod4-V”. And restart the pc afterwards. But that
>> didn’t help either.
>>
>> So I still can’t copy and paste text between different domains.
>>
>> So it seems to be a bug that needs fixing...
>>
>
>
>
> Here (https://github.com/QubesOS/qubes-issues/issues/5707) I got told by
> Andrew David Wong that it is needed to delete the “#” sign on the edited
> lines to change their status from a comment to a script that is going to be
> executed.
>
> So here are the steps to change the key combination for secure copy and
> paste:
>
>1. Write this in the dom0 terminal (you might have to use root
>access): nano etc/qubes/guid.conf
>2. Change “Ctrl-Shift-c” to for example “Shift-Mod4-c”  (Mod4 is the
>Win key)
>3. Change “Ctrl-Shift-v” to for example “Shift-Mod4-v”
>4. Delete the “#” sign in the beginning of this/these line(s) (to
>change there status to a executive script).
>5. Save the file by pressing Ctrl + X, press Y and then Enter.
>6. Restart the pc to begin using the new key combination for secure
>copy and paste.
>
>
It worked.

And it’s also possible to use the Alt key instead in the key combination
for secure copy and paste. Just write “Alt” instead of one of the other
keys.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUHoaMbt29qU-OjOwVA4A0ZJ%2BKLE9OQP9CWzXv-uefi9Wg%40mail.gmail.com.

Re: [qubes-users] How to change the keys for secure copy and paste between VM’s ?

[A E]

tor. 27. feb. 2020 kl. 17.00 skrev A E :

> tir. 25. feb. 2020 kl. 18.31 skrev A :
>
>> How to change the keys for secure copy and paste between VM’s ?
>>
>> I have tried to change the keys in this file: etc/qubes/guid.conf to
>> Ctrl + Alt + C  and  Crtl + Alt + V  But that didn’t work. Maybe because it
>> isn’t possible to use the Alt key here as it isn’t listed as a “valid
>> modifier key name” according to the text in the file.
>>
>> As my dom0 both uses the Ctrl + Shift and Ctrl + Win combination to
>> something different, I need to change the combination for secure copy and
>> paste. How do I do that ?
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "qubes-users" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/qubes-users/PjYgZxTiKT0/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> qubes-users+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/qubes-users/91285191-fef9-4032-8226-41dffd149ce0%40googlegroups.com
>> .
>>
>
>
> According to the following page, it should be possible to change the keys
> used for secure copy and paste text between different domains:
>
> https://www.qubes-os.org/doc/copy-paste/#shortcut-configuration
>
> But now I have tried to change the keys for secure copy and paste to
> “Shift-Mod4-C” and “Shift-Mod4-V”. And restart the pc afterwards. But that
> didn’t help either.
>
> So I still can’t copy and paste text between different domains.
>
> So it seems to be a bug that needs fixing...
>



Here (https://github.com/QubesOS/qubes-issues/issues/5707) I got told by
Andrew David Wong that it is needed to delete the “#” sign on the edited
lines to change their status from a comment to a script that is going to be
executed.

So here are the steps to change the key combination for secure copy and
paste:

   1. Write this in the dom0 terminal (you might have to use root access):
   nano etc/qubes/guid.conf
   2. Change “Ctrl-Shift-c” to for example “Shift-Mod4-c”  (Mod4 is the Win
   key)
   3. Change “Ctrl-Shift-v” to for example “Shift-Mod4-v”
   4. Delete the “#” sign in the beginning of this/these line(s) (to change
   there status to a executive script).
   5. Save the file by pressing Ctrl + X, press Y and then Enter.
   6. Restart the pc to begin using the new key combination for secure copy
   and paste.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUGh_ECL2op64f-Kw7A0Xi4VEU7uC8c%3D5yfKpO0Lc24RTg%40mail.gmail.com.

Re: [qubes-users] Where to find the directory of a attached mobile phone ?

[A E]

fre. 28. feb. 2020 kl. 22.47 skrev Steve Coleman :

> On 2/28/20, A E  wrote:
> > fre. 28. feb. 2020 kl. 21.07 skrev :
> >
> >> On Fri, Feb 28, 2020 at 12:01:04PM -0800, A wrote:
> >> > I have attached my mobile phone to a VM, but can’t find its directory
> >> > in the file manager of that VM.
> >>
> >> in which way did you attach it?
> >> do qvm-block or qvm-usb show it as attached to the right vm?
> >> does it show up in /proc/partitions or lsusb in the target vm?
> >>
> >> and does whatever you are trying to do work in sys-usb?
> >>
> >>
> >>
> >>
> > Thank you for your very quick response.
> >
> > The mobile phone is listed as two devices:
> >
> > 1)  sys-usb: sda - Disk ()
> >
> > 2)  sys-usb: 1-3 - ..._Mass_Storage_Device_...
> >
> > I have tried to attach both - one at a time - in the following way.
> >
> > I attached it by clicking on the device icon -> The device (mobile phone
> > storage) -> The VM that I would like it to be attached to.
> >
> > When attached, they both appear as such according to qvm-block and
> qvm-usb
> > in dom0.
> >
> > When I attached the second one, and execute lsusb in the VM terminal
> where
> > it is attached to, it show up.
> >
> > I don’t know how to check the attachment of the first device in the VM
> > terminal.
> >
> > In the file manager of the attached VM under /proc/partitions, I find a
> > file that only displays partitions with xvd... I don’t know if the
> attached
> > partitions is some of these.
> >
> > No, I haven’t been able to locate the directory of the mobile phone in
> the
> > file manager of the sys-usb VM either.
> >
> > Any ideas on how to proceed... ?
>
> If using your file manager in the AppVM does not display the new
> device you can always use qvm-block in dom0 to tell you where the
> device is currently assigned, and under what name.
> Once you have attached the device to your AppVM you can run qvm-block
> in dom0 with no arguments and it will display the device name in the
> results. You will see it as "frontend-dev=" on that
> line on the right. Probably "xvdi" or something close to that.
>
> Then you can then use the mount command in the AppVM to mount the
> device (e.g. "/dev/xvdi" ) wherever you like.
>



When I execute "sudo mount /dev/xvdi /mnt" in the terminal of the VM, I get
this error: “mount: /dev/xvdi/mnt: can’t find in /etc/fstab.

And I get this with both devices.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEFqjG97VrXj5nR2A%2BRWTRbEXeT1t9pfqMh8FeYfu0zew%40mail.gmail.com.

Re: [qubes-users] Where to find the directory of a attached mobile phone ?

[A E]

fre. 28. feb. 2020 kl. 21.07 skrev :

> On Fri, Feb 28, 2020 at 12:01:04PM -0800, A wrote:
> > I have attached my mobile phone to a VM, but can’t find its directory
> > in the file manager of that VM.
>
> in which way did you attach it?
> do qvm-block or qvm-usb show it as attached to the right vm?
> does it show up in /proc/partitions or lsusb in the target vm?
>
> and does whatever you are trying to do work in sys-usb?
>
>
>
>
Thank you for your very quick response.

The mobile phone is listed as two devices:

1)  sys-usb: sda - Disk ()

2)  sys-usb: 1-3 - ..._Mass_Storage_Device_...

I have tried to attach both - one at a time - in the following way.

I attached it by clicking on the device icon -> The device (mobile phone
storage) -> The VM that I would like it to be attached to.

When attached, they both appear as such according to qvm-block and qvm-usb
in dom0.

When I attached the second one, and execute lsusb in the VM terminal where
it is attached to, it show up.

I don’t know how to check the attachment of the first device in the VM
terminal.

In the file manager of the attached VM under /proc/partitions, I find a
file that only displays partitions with xvd... I don’t know if the attached
partitions is some of these.

No, I haven’t been able to locate the directory of the mobile phone in the
file manager of the sys-usb VM either.

Any ideas on how to proceed... ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEfJTPt8FSk0pujMLcRUwiDqLLhZb4zhg6zbV37rWESYQ%40mail.gmail.com.

Re: [qubes-users] How to change the keys for secure copy and paste between VM’s ?

[A E]

tir. 25. feb. 2020 kl. 18.31 skrev A :

> How to change the keys for secure copy and paste between VM’s ?
>
> I have tried to change the keys in this file: etc/qubes/guid.conf to  Ctrl
> + Alt + C  and  Crtl + Alt + V  But that didn’t work. Maybe because it
> isn’t possible to use the Alt key here as it isn’t listed as a “valid
> modifier key name” according to the text in the file.
>
> As my dom0 both uses the Ctrl + Shift and Ctrl + Win combination to
> something different, I need to change the combination for secure copy and
> paste. How do I do that ?
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/PjYgZxTiKT0/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/91285191-fef9-4032-8226-41dffd149ce0%40googlegroups.com
> .
>


According to the following page, it should be possible to change the keys
used for secure copy and paste text between different domains:

https://www.qubes-os.org/doc/copy-paste/#shortcut-configuration

But now I have tried to change the keys for secure copy and paste to
“Shift-Mod4-C” and “Shift-Mod4-V”. And restart the pc afterwards. But that
didn’t help either.

So I still can’t copy and paste text between different domains.

So it seems to be a bug that needs fixing...

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUFE-to%3D%3D9JR6rz7oYwFY9Y%2BgT6-FYMmoD%3Do%3DY338jpYKw%40mail.gmail.com.

Re: [qubes-users] Is it necessary to connect to a Microsoft account when installing and using Microsoft Office 365 (in a Win 10 HVM) or is it somehow possible to bypass this requirement and if so how

[A E]

tir. 25. feb. 2020 kl. 18.53 skrev A :

> Is it necessary to connect to a Microsoft account when installing and
> using Microsoft Office 365 (in a Win 10 HVM) or is it somehow possible to
> bypass this requirement, and if so how ?
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/j8Kout2ixes/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/c2361338-66ef-41b3-8a0b-df8df685dc58%40googlegroups.com
> .
>


As far as I have found out, it seems necessary to connect to a Microsoft
Account to install and use all legal versions of Microsoft Office.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUG4db3EgPH3hjtfxjU_K3-Ca%3Dpp7SEUntakOmW_-sFT%2Bg%40mail.gmail.com.

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

ons. 26. feb. 2020 kl. 19.05 skrev A E :

> tir. 25. feb. 2020 kl. 14.08 skrev A E :
>
>> tir. 25. feb. 2020 kl. 13.31 skrev A E :
>>
>>> tir. 25. feb. 2020 kl. 13.26 skrev A E :
>>>
>>>> man. 24. feb. 2020 kl. 20.13 skrev A E :
>>>>
>>>>> man. 24. feb. 2020 kl. 14.12 skrev A E :
>>>>>
>>>>>> ons. 19. feb. 2020 kl. 15.51 skrev A E :
>>>>>>
>>>>>>> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>>>>>>>
>>>>>>>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users
>>>>>>>> :
>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>>>>>>>> > ׁHi Elliot,
>>>>>>>>> >
>>>>>>>>> > I've downloaded again and succeeded creating the HVM.
>>>>>>>>> >
>>>>>>>>> > I had a Windows 10 HVM I built manually just booting from the
>>>>>>>>> ISO and where
>>>>>>>>> > I did not succeed installing the QWT (boot after the QWT install
>>>>>>>>> would
>>>>>>>>> > freeze).
>>>>>>>>> >
>>>>>>>>> > Would you recommend building a Template from this HVM?
>>>>>>>>> >
>>>>>>>>> > The big advantage I saw in this implementation was that I can
>>>>>>>>> confortably
>>>>>>>>> > run my applications with 2GB (minimum) vs 6GB in my previous
>>>>>>>>> HVM. Another
>>>>>>>>> > advantage of the QWT is that I can send files from Windows to
>>>>>>>>> any other
>>>>>>>>> > PV/HPV VM using qrexec.
>>>>>>>>> >
>>>>>>>>> > What's intriguing me is that copy/paste between VMs is not
>>>>>>>>> working. When I
>>>>>>>>> > ctl+shift+C on my Windows VM I see the popup saying I can
>>>>>>>>> ctl+shift+V on
>>>>>>>>> > another VM but when I do so nothing is pasted. Any ideas?
>>>>>>>>> >
>>>>>>>>> > Thank you very much for this scripts/Windows VM builder.
>>>>>>>>> >
>>>>>>>>> > Regards
>>>>>>>>>
>>>>>>>>> By freeze do you mean it stops on the part where QWT tries to
>>>>>>>>> create the
>>>>>>>>> private disk? This is documented in the QWT Known Issues section
>>>>>>>>> of the
>>>>>>>>> README. Just exit that window with the error message and the
>>>>>>>>> installation will proceed as normal. Besides that for Windows
>>>>>>>>> 10/Windows
>>>>>>>>> Server 2019, you should not have to interact with any window or
>>>>>>>>> part of
>>>>>>>>> the installation. Sometimes, QWT may also just crash upon boot
>>>>>>>>> causing
>>>>>>>>> Windows to crash. This doesn't happen often, however, it is also
>>>>>>>>> documented in the README. This is more likely to happen if you
>>>>>>>>> installed
>>>>>>>>> Windows manually as you said because unstable QWT features like
>>>>>>>>> Qubes
>>>>>>>>> Memory Manager (qmemman) are enabled by default which we disable
>>>>>>>>> in the
>>>>>>>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that
>>>>>>>>> one).
>>>>>>>>>
>>>>>>>>> Due to that bug in making the private disk required, it's not
>>>>>>>>> possible
>>>>>>>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>>>>>>>> Otherwise, I would recommend for must users to build a template
>>>>>>>>> with the
>>>>>>>>> software they want pre-installed and make AppVMs from that.
>>>>>>>>>
>>>>>

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tir. 25. feb. 2020 kl. 18.05 skrev A E :

> tir. 25. feb. 2020 kl. 14.09 skrev A E :
>
>> tir. 25. feb. 2020 kl. 13.16 skrev A E :
>>
>>> tir. 25. feb. 2020 kl. 13.02 skrev A :
>>>
>>>> A way to download Windows 10 Pro manually and install it.
>>>>
>>>> I haven’t managed to download Windows 10 Pro by using the file
>>>> “download-windows.sh”. So instead I downloaded Windows 10 Pro manually and
>>>> ran the script afterwards.
>>>>
>>>> You can follow these steps to do it the same way as I did it:
>>>>
>>>> 1)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
>>>> “Network”, choose “default” one and click on “Apply”.
>>>>
>>>> 2)  Open the domains Firefox browser and search the web for “how to
>>>> download windows 10”.
>>>>   One of the first results is a link to a Microsoft webpage from
>>>> which it is possible to download the file in the local language.
>>>>   The file gets downloaded to the download folder in the domain.
>>>>
>>>> 3)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
>>>> “Network”, choose “(none)” and click on “Apply”.
>>>>
>>>> 4)  Move or copy the file to this destination:
>>>> /Documents/qvm-create-windows-qube/windows-media/isos
>>>>
>>>> 5)  Open the terminal in dom0 and execute the following script
>>>> (remember to write the name of the iso file you downloaded in step 2
>>>> instead of “filename”):
>>>>
>>>> ./qvm-create-windows-qube.sh -n sys-whonix -oyw -i filename.iso -a
>>>> win10x64-pro.xml anon-win10
>>>>
>>>> Info: anon-win10 will be the name of the domain. I don’t know if it is
>>>> possible to change the domain name without spoiling anything.
>>>>
>>>> Do not close the terminal before it says the installation was complete
>>>> (successfully) !
>>>>
>>>> Let the terminal do the job, it restarts the qube and so on when it is
>>>> necessary.
>>>>
>>>> When I got into Windows there appeared three message boxes. One saying
>>>> that the pc has to be restarted. A second one saying that drive D has to be
>>>> formatted. And the third one saying something about a private drive as far
>>>> as I recall.
>>>>
>>>> I started to click OK, I think on the third messaged, and then Windows
>>>> immediately closed and restarted and seemed to run fine afterwards.
>>>>
>>>> And in the terminal it said the installation was completed successfully.
>>>>
>>>> --
>>>> You received this message because you are subscribed to a topic in the
>>>> Google Groups "qubes-users" group.
>>>> To unsubscribe from this topic, visit
>>>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>>>> To unsubscribe from this group and all its topics, send an email to
>>>> qubes-users+unsubscr...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/qubes-users/f940ca5c-0099-4dff-8930-f6801440511d%40googlegroups.com
>>>> .
>>>>
>>>
>>> Afterwards, I have mistakenly closed the window with Windows 10 in it.
>>> And now I can’t figure out how to make the window visible again...
>>>
>>> I have tried to click on different icons in the menu of the domain
>>> ananon-win10 in the qube menu - also the one called “Start”. A message pops
>>> up saying that the domain is started, but I can’t see a window where
>>> Windows 10 is starting up.
>>>
>>> Can someone tell me how to make the window visible again ?
>>>
>>
>>
>> Arh, to make it appear again, just execute this script in dom0: qvm-features
>>  gui 1 .
>>
>> Write the name of the domain (for example “anon-win10”), instead of 
>> 
>> .
>>
>>
>>
>
> To change the size of the window, change the screen resolution in Windows.
>
> For now, it doesn’t seem possible to get the window to cover the whole
> screen except the Qubes menu.
>


How to install Microsoft Office365 in a Win10 HVM that is created by using
the script: ./qvm-create-windows-qube.sh -n sys-whonix -oyw -i filename.iso
-a win10x64-pro.xml anon-win10 ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEtpJLKhkT5nYXuGdV4HHXX-WDJTYD%3D0d4LAgaSkSikEQ%40mail.gmail.com.

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

tir. 25. feb. 2020 kl. 14.08 skrev A E :

> tir. 25. feb. 2020 kl. 13.31 skrev A E :
>
>> tir. 25. feb. 2020 kl. 13.26 skrev A E :
>>
>>> man. 24. feb. 2020 kl. 20.13 skrev A E :
>>>
>>>> man. 24. feb. 2020 kl. 14.12 skrev A E :
>>>>
>>>>> ons. 19. feb. 2020 kl. 15.51 skrev A E :
>>>>>
>>>>>> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>>>>>>
>>>>>>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
>>>>>>> qubes-users@googlegroups.com>:
>>>>>>>
>>>>>>>>
>>>>>>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>>>>>>> > ׁHi Elliot,
>>>>>>>> >
>>>>>>>> > I've downloaded again and succeeded creating the HVM.
>>>>>>>> >
>>>>>>>> > I had a Windows 10 HVM I built manually just booting from the ISO
>>>>>>>> and where
>>>>>>>> > I did not succeed installing the QWT (boot after the QWT install
>>>>>>>> would
>>>>>>>> > freeze).
>>>>>>>> >
>>>>>>>> > Would you recommend building a Template from this HVM?
>>>>>>>> >
>>>>>>>> > The big advantage I saw in this implementation was that I can
>>>>>>>> confortably
>>>>>>>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>>>>>>>> Another
>>>>>>>> > advantage of the QWT is that I can send files from Windows to any
>>>>>>>> other
>>>>>>>> > PV/HPV VM using qrexec.
>>>>>>>> >
>>>>>>>> > What's intriguing me is that copy/paste between VMs is not
>>>>>>>> working. When I
>>>>>>>> > ctl+shift+C on my Windows VM I see the popup saying I can
>>>>>>>> ctl+shift+V on
>>>>>>>> > another VM but when I do so nothing is pasted. Any ideas?
>>>>>>>> >
>>>>>>>> > Thank you very much for this scripts/Windows VM builder.
>>>>>>>> >
>>>>>>>> > Regards
>>>>>>>>
>>>>>>>> By freeze do you mean it stops on the part where QWT tries to
>>>>>>>> create the
>>>>>>>> private disk? This is documented in the QWT Known Issues section of
>>>>>>>> the
>>>>>>>> README. Just exit that window with the error message and the
>>>>>>>> installation will proceed as normal. Besides that for Windows
>>>>>>>> 10/Windows
>>>>>>>> Server 2019, you should not have to interact with any window or
>>>>>>>> part of
>>>>>>>> the installation. Sometimes, QWT may also just crash upon boot
>>>>>>>> causing
>>>>>>>> Windows to crash. This doesn't happen often, however, it is also
>>>>>>>> documented in the README. This is more likely to happen if you
>>>>>>>> installed
>>>>>>>> Windows manually as you said because unstable QWT features like
>>>>>>>> Qubes
>>>>>>>> Memory Manager (qmemman) are enabled by default which we disable in
>>>>>>>> the
>>>>>>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that
>>>>>>>> one).
>>>>>>>>
>>>>>>>> Due to that bug in making the private disk required, it's not
>>>>>>>> possible
>>>>>>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>>>>>>> Otherwise, I would recommend for must users to build a template
>>>>>>>> with the
>>>>>>>> software they want pre-installed and make AppVMs from that.
>>>>>>>>
>>>>>>>> Regarding copy/paste not working, it appears to work fine for
>>>>>>>> others so
>>>>>>>> I would just suggest you restart the Windows qube or possibly make
>>>>>>>> a new
>>>>>>>> one. If it's copy

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tir. 25. feb. 2020 kl. 14.09 skrev A E :

> tir. 25. feb. 2020 kl. 13.16 skrev A E :
>
>> tir. 25. feb. 2020 kl. 13.02 skrev A :
>>
>>> A way to download Windows 10 Pro manually and install it.
>>>
>>> I haven’t managed to download Windows 10 Pro by using the file
>>> “download-windows.sh”. So instead I downloaded Windows 10 Pro manually and
>>> ran the script afterwards.
>>>
>>> You can follow these steps to do it the same way as I did it:
>>>
>>> 1)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
>>> “Network”, choose “default” one and click on “Apply”.
>>>
>>> 2)  Open the domains Firefox browser and search the web for “how to
>>> download windows 10”.
>>>   One of the first results is a link to a Microsoft webpage from
>>> which it is possible to download the file in the local language.
>>>   The file gets downloaded to the download folder in the domain.
>>>
>>> 3)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
>>> “Network”, choose “(none)” and click on “Apply”.
>>>
>>> 4)  Move or copy the file to this destination:
>>> /Documents/qvm-create-windows-qube/windows-media/isos
>>>
>>> 5)  Open the terminal in dom0 and execute the following script (remember
>>> to write the name of the iso file you downloaded in step 2 instead of
>>> “filename”):
>>>
>>> ./qvm-create-windows-qube.sh -n sys-whonix -oyw -i filename.iso -a
>>> win10x64-pro.xml anon-win10
>>>
>>> Info: anon-win10 will be the name of the domain. I don’t know if it is
>>> possible to change the domain name without spoiling anything.
>>>
>>> Do not close the terminal before it says the installation was complete
>>> (successfully) !
>>>
>>> Let the terminal do the job, it restarts the qube and so on when it is
>>> necessary.
>>>
>>> When I got into Windows there appeared three message boxes. One saying
>>> that the pc has to be restarted. A second one saying that drive D has to be
>>> formatted. And the third one saying something about a private drive as far
>>> as I recall.
>>>
>>> I started to click OK, I think on the third messaged, and then Windows
>>> immediately closed and restarted and seemed to run fine afterwards.
>>>
>>> And in the terminal it said the installation was completed successfully.
>>>
>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "qubes-users" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> qubes-users+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/qubes-users/f940ca5c-0099-4dff-8930-f6801440511d%40googlegroups.com
>>> .
>>>
>>
>> Afterwards, I have mistakenly closed the window with Windows 10 in it.
>> And now I can’t figure out how to make the window visible again...
>>
>> I have tried to click on different icons in the menu of the domain
>> ananon-win10 in the qube menu - also the one called “Start”. A message pops
>> up saying that the domain is started, but I can’t see a window where
>> Windows 10 is starting up.
>>
>> Can someone tell me how to make the window visible again ?
>>
>
>
> Arh, to make it appear again, just execute this script in dom0: qvm-features
>  gui 1 .
>
> Write the name of the domain (for example “anon-win10”), instead of 
> 
> .
>
>
>

To change the size of the window, change the screen resolution in Windows.

For now, it doesn’t seem possible to get the window to cover the whole
screen except the Qubes menu.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUH_nEF5EtMGXb9W5sdO9vf%3D557Y%2BusWdGXBje8JqT_5KA%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tir. 25. feb. 2020 kl. 13.16 skrev A E :

> tir. 25. feb. 2020 kl. 13.02 skrev A :
>
>> A way to download Windows 10 Pro manually and install it.
>>
>> I haven’t managed to download Windows 10 Pro by using the file
>> “download-windows.sh”. So instead I downloaded Windows 10 Pro manually and
>> ran the script afterwards.
>>
>> You can follow these steps to do it the same way as I did it:
>>
>> 1)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
>> “Network”, choose “default” one and click on “Apply”.
>>
>> 2)  Open the domains Firefox browser and search the web for “how to
>> download windows 10”.
>>   One of the first results is a link to a Microsoft webpage from
>> which it is possible to download the file in the local language.
>>   The file gets downloaded to the download folder in the domain.
>>
>> 3)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
>> “Network”, choose “(none)” and click on “Apply”.
>>
>> 4)  Move or copy the file to this destination:
>> /Documents/qvm-create-windows-qube/windows-media/isos
>>
>> 5)  Open the terminal in dom0 and execute the following script (remember
>> to write the name of the iso file you downloaded in step 2 instead of
>> “filename”):
>>
>> ./qvm-create-windows-qube.sh -n sys-whonix -oyw -i filename.iso -a
>> win10x64-pro.xml anon-win10
>>
>> Info: anon-win10 will be the name of the domain. I don’t know if it is
>> possible to change the domain name without spoiling anything.
>>
>> Do not close the terminal before it says the installation was complete
>> (successfully) !
>>
>> Let the terminal do the job, it restarts the qube and so on when it is
>> necessary.
>>
>> When I got into Windows there appeared three message boxes. One saying
>> that the pc has to be restarted. A second one saying that drive D has to be
>> formatted. And the third one saying something about a private drive as far
>> as I recall.
>>
>> I started to click OK, I think on the third messaged, and then Windows
>> immediately closed and restarted and seemed to run fine afterwards.
>>
>> And in the terminal it said the installation was completed successfully.
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "qubes-users" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> qubes-users+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/qubes-users/f940ca5c-0099-4dff-8930-f6801440511d%40googlegroups.com
>> .
>>
>
> Afterwards, I have mistakenly closed the window with Windows 10 in it. And
> now I can’t figure out how to make the window visible again...
>
> I have tried to click on different icons in the menu of the domain
> ananon-win10 in the qube menu - also the one called “Start”. A message pops
> up saying that the domain is started, but I can’t see a window where
> Windows 10 is starting up.
>
> Can someone tell me how to make the window visible again ?
>


Arh, to make it appear again, just execute this script in dom0: qvm-features
 gui 1 .

Write the name of the domain (for example “anon-win10”), instead of

.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUFAvgjkfvdj4uAT_DULh5a%3Dah-gZFkM14_oWHjiO48EPA%40mail.gmail.com.

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

tir. 25. feb. 2020 kl. 13.31 skrev A E :

> tir. 25. feb. 2020 kl. 13.26 skrev A E :
>
>> man. 24. feb. 2020 kl. 20.13 skrev A E :
>>
>>> man. 24. feb. 2020 kl. 14.12 skrev A E :
>>>
>>>> ons. 19. feb. 2020 kl. 15.51 skrev A E :
>>>>
>>>>> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>>>>>
>>>>>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
>>>>>> qubes-users@googlegroups.com>:
>>>>>>
>>>>>>>
>>>>>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>>>>>> > ׁHi Elliot,
>>>>>>> >
>>>>>>> > I've downloaded again and succeeded creating the HVM.
>>>>>>> >
>>>>>>> > I had a Windows 10 HVM I built manually just booting from the ISO
>>>>>>> and where
>>>>>>> > I did not succeed installing the QWT (boot after the QWT install
>>>>>>> would
>>>>>>> > freeze).
>>>>>>> >
>>>>>>> > Would you recommend building a Template from this HVM?
>>>>>>> >
>>>>>>> > The big advantage I saw in this implementation was that I can
>>>>>>> confortably
>>>>>>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>>>>>>> Another
>>>>>>> > advantage of the QWT is that I can send files from Windows to any
>>>>>>> other
>>>>>>> > PV/HPV VM using qrexec.
>>>>>>> >
>>>>>>> > What's intriguing me is that copy/paste between VMs is not
>>>>>>> working. When I
>>>>>>> > ctl+shift+C on my Windows VM I see the popup saying I can
>>>>>>> ctl+shift+V on
>>>>>>> > another VM but when I do so nothing is pasted. Any ideas?
>>>>>>> >
>>>>>>> > Thank you very much for this scripts/Windows VM builder.
>>>>>>> >
>>>>>>> > Regards
>>>>>>>
>>>>>>> By freeze do you mean it stops on the part where QWT tries to create
>>>>>>> the
>>>>>>> private disk? This is documented in the QWT Known Issues section of
>>>>>>> the
>>>>>>> README. Just exit that window with the error message and the
>>>>>>> installation will proceed as normal. Besides that for Windows
>>>>>>> 10/Windows
>>>>>>> Server 2019, you should not have to interact with any window or part
>>>>>>> of
>>>>>>> the installation. Sometimes, QWT may also just crash upon boot
>>>>>>> causing
>>>>>>> Windows to crash. This doesn't happen often, however, it is also
>>>>>>> documented in the README. This is more likely to happen if you
>>>>>>> installed
>>>>>>> Windows manually as you said because unstable QWT features like Qubes
>>>>>>> Memory Manager (qmemman) are enabled by default which we disable in
>>>>>>> the
>>>>>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that
>>>>>>> one).
>>>>>>>
>>>>>>> Due to that bug in making the private disk required, it's not
>>>>>>> possible
>>>>>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>>>>>> Otherwise, I would recommend for must users to build a template with
>>>>>>> the
>>>>>>> software they want pre-installed and make AppVMs from that.
>>>>>>>
>>>>>>> Regarding copy/paste not working, it appears to work fine for others
>>>>>>> so
>>>>>>> I would just suggest you restart the Windows qube or possibly make a
>>>>>>> new
>>>>>>> one. If it's copying the data out correctly then there should be a
>>>>>>> notification saying "Copied X bytes to the clipboard".
>>>>>>>
>>>>>>> You're welcome, Claudio!
>>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Elliot
&g

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

tir. 25. feb. 2020 kl. 13.26 skrev A E :

> man. 24. feb. 2020 kl. 20.13 skrev A E :
>
>> man. 24. feb. 2020 kl. 14.12 skrev A E :
>>
>>> ons. 19. feb. 2020 kl. 15.51 skrev A E :
>>>
>>>> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>>>>
>>>>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
>>>>> qubes-users@googlegroups.com>:
>>>>>
>>>>>>
>>>>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>>>>> > ׁHi Elliot,
>>>>>> >
>>>>>> > I've downloaded again and succeeded creating the HVM.
>>>>>> >
>>>>>> > I had a Windows 10 HVM I built manually just booting from the ISO
>>>>>> and where
>>>>>> > I did not succeed installing the QWT (boot after the QWT install
>>>>>> would
>>>>>> > freeze).
>>>>>> >
>>>>>> > Would you recommend building a Template from this HVM?
>>>>>> >
>>>>>> > The big advantage I saw in this implementation was that I can
>>>>>> confortably
>>>>>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>>>>>> Another
>>>>>> > advantage of the QWT is that I can send files from Windows to any
>>>>>> other
>>>>>> > PV/HPV VM using qrexec.
>>>>>> >
>>>>>> > What's intriguing me is that copy/paste between VMs is not working.
>>>>>> When I
>>>>>> > ctl+shift+C on my Windows VM I see the popup saying I can
>>>>>> ctl+shift+V on
>>>>>> > another VM but when I do so nothing is pasted. Any ideas?
>>>>>> >
>>>>>> > Thank you very much for this scripts/Windows VM builder.
>>>>>> >
>>>>>> > Regards
>>>>>>
>>>>>> By freeze do you mean it stops on the part where QWT tries to create
>>>>>> the
>>>>>> private disk? This is documented in the QWT Known Issues section of
>>>>>> the
>>>>>> README. Just exit that window with the error message and the
>>>>>> installation will proceed as normal. Besides that for Windows
>>>>>> 10/Windows
>>>>>> Server 2019, you should not have to interact with any window or part
>>>>>> of
>>>>>> the installation. Sometimes, QWT may also just crash upon boot causing
>>>>>> Windows to crash. This doesn't happen often, however, it is also
>>>>>> documented in the README. This is more likely to happen if you
>>>>>> installed
>>>>>> Windows manually as you said because unstable QWT features like Qubes
>>>>>> Memory Manager (qmemman) are enabled by default which we disable in
>>>>>> the
>>>>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that
>>>>>> one).
>>>>>>
>>>>>> Due to that bug in making the private disk required, it's not possible
>>>>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>>>>> Otherwise, I would recommend for must users to build a template with
>>>>>> the
>>>>>> software they want pre-installed and make AppVMs from that.
>>>>>>
>>>>>> Regarding copy/paste not working, it appears to work fine for others
>>>>>> so
>>>>>> I would just suggest you restart the Windows qube or possibly make a
>>>>>> new
>>>>>> one. If it's copying the data out correctly then there should be a
>>>>>> notification saying "Copied X bytes to the clipboard".
>>>>>>
>>>>>> You're welcome, Claudio!
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Elliot
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "qubes-users" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to qubes-users+unsubscr...@googlegroups.com.
>

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

man. 24. feb. 2020 kl. 20.13 skrev A E :

> man. 24. feb. 2020 kl. 14.12 skrev A E :
>
>> ons. 19. feb. 2020 kl. 15.51 skrev A E :
>>
>>> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>>>
>>>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
>>>> qubes-users@googlegroups.com>:
>>>>
>>>>>
>>>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>>>> > ׁHi Elliot,
>>>>> >
>>>>> > I've downloaded again and succeeded creating the HVM.
>>>>> >
>>>>> > I had a Windows 10 HVM I built manually just booting from the ISO
>>>>> and where
>>>>> > I did not succeed installing the QWT (boot after the QWT install
>>>>> would
>>>>> > freeze).
>>>>> >
>>>>> > Would you recommend building a Template from this HVM?
>>>>> >
>>>>> > The big advantage I saw in this implementation was that I can
>>>>> confortably
>>>>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>>>>> Another
>>>>> > advantage of the QWT is that I can send files from Windows to any
>>>>> other
>>>>> > PV/HPV VM using qrexec.
>>>>> >
>>>>> > What's intriguing me is that copy/paste between VMs is not working.
>>>>> When I
>>>>> > ctl+shift+C on my Windows VM I see the popup saying I can
>>>>> ctl+shift+V on
>>>>> > another VM but when I do so nothing is pasted. Any ideas?
>>>>> >
>>>>> > Thank you very much for this scripts/Windows VM builder.
>>>>> >
>>>>> > Regards
>>>>>
>>>>> By freeze do you mean it stops on the part where QWT tries to create
>>>>> the
>>>>> private disk? This is documented in the QWT Known Issues section of the
>>>>> README. Just exit that window with the error message and the
>>>>> installation will proceed as normal. Besides that for Windows
>>>>> 10/Windows
>>>>> Server 2019, you should not have to interact with any window or part of
>>>>> the installation. Sometimes, QWT may also just crash upon boot causing
>>>>> Windows to crash. This doesn't happen often, however, it is also
>>>>> documented in the README. This is more likely to happen if you
>>>>> installed
>>>>> Windows manually as you said because unstable QWT features like Qubes
>>>>> Memory Manager (qmemman) are enabled by default which we disable in the
>>>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that
>>>>> one).
>>>>>
>>>>> Due to that bug in making the private disk required, it's not possible
>>>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>>>> Otherwise, I would recommend for must users to build a template with
>>>>> the
>>>>> software they want pre-installed and make AppVMs from that.
>>>>>
>>>>> Regarding copy/paste not working, it appears to work fine for others so
>>>>> I would just suggest you restart the Windows qube or possibly make a
>>>>> new
>>>>> one. If it's copying the data out correctly then there should be a
>>>>> notification saying "Copied X bytes to the clipboard".
>>>>>
>>>>> You're welcome, Claudio!
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Elliot
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "qubes-users" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to qubes-users+unsubscr...@googlegroups.com.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/qubes-users/2de7254e-c22c-3275-cdfd-30cdacd86a67%40zohomail.eu
>>>>> .
>>>>
>>>>
>>>>
>>>> I want to install Windows 10 from a DVD in a new HVM and have begun
>>>> following this guide: https://www.qubes-os.org/doc/windows-vm/
>>>>
>>>> It says:
>>>>
>

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tir. 25. feb. 2020 kl. 13.02 skrev A :

> A way to download Windows 10 Pro manually and install it.
>
> I haven’t managed to download Windows 10 Pro by using the file
> “download-windows.sh”. So instead I downloaded Windows 10 Pro manually and
> ran the script afterwards.
>
> You can follow these steps to do it the same way as I did it:
>
> 1)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
> “Network”, choose “default” one and click on “Apply”.
>
> 2)  Open the domains Firefox browser and search the web for “how to
> download windows 10”.
>   One of the first results is a link to a Microsoft webpage from which
> it is possible to download the file in the local language.
>   The file gets downloaded to the download folder in the domain.
>
> 3)  Open the “Qube Settings” for the domain “windows-mgmt”. Under
> “Network”, choose “(none)” and click on “Apply”.
>
> 4)  Move or copy the file to this destination:
> /Documents/qvm-create-windows-qube/windows-media/isos
>
> 5)  Open the terminal in dom0 and execute the following script (remember
> to write the name of the iso file you downloaded in step 2 instead of
> “filename”):
>
> ./qvm-create-windows-qube.sh -n sys-whonix -oyw -i filename.iso -a
> win10x64-pro.xml anon-win10
>
> Info: anon-win10 will be the name of the domain. I don’t know if it is
> possible to change the domain name without spoiling anything.
>
> Do not close the terminal before it says the installation was complete
> (successfully) !
>
> Let the terminal do the job, it restarts the qube and so on when it is
> necessary.
>
> When I got into Windows there appeared three message boxes. One saying
> that the pc has to be restarted. A second one saying that drive D has to be
> formatted. And the third one saying something about a private drive as far
> as I recall.
>
> I started to click OK, I think on the third messaged, and then Windows
> immediately closed and restarted and seemed to run fine afterwards.
>
> And in the terminal it said the installation was completed successfully.
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/f940ca5c-0099-4dff-8930-f6801440511d%40googlegroups.com
> .
>

Afterwards, I have mistakenly closed the window with Windows 10 in it. And
now I can’t figure out how to make the window visible again...

I have tried to click on different icons in the menu of the domain
ananon-win10 in the qube menu - also the one called “Start”. A message pops
up saying that the domain is started, but I can’t see a window where
Windows 10 is starting up.

Can someone tell me how to make the window visible again ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEXA9dzwpRqb0AsWojmJt6L1ny_oU8XgsZnst31KJdyWQ%40mail.gmail.com.

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

man. 24. feb. 2020 kl. 14.12 skrev A E :

> ons. 19. feb. 2020 kl. 15.51 skrev A E :
>
>> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>>
>>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
>>> qubes-users@googlegroups.com>:
>>>
>>>>
>>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>>> > ׁHi Elliot,
>>>> >
>>>> > I've downloaded again and succeeded creating the HVM.
>>>> >
>>>> > I had a Windows 10 HVM I built manually just booting from the ISO and
>>>> where
>>>> > I did not succeed installing the QWT (boot after the QWT install
>>>> would
>>>> > freeze).
>>>> >
>>>> > Would you recommend building a Template from this HVM?
>>>> >
>>>> > The big advantage I saw in this implementation was that I can
>>>> confortably
>>>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>>>> Another
>>>> > advantage of the QWT is that I can send files from Windows to any
>>>> other
>>>> > PV/HPV VM using qrexec.
>>>> >
>>>> > What's intriguing me is that copy/paste between VMs is not working.
>>>> When I
>>>> > ctl+shift+C on my Windows VM I see the popup saying I can ctl+shift+V
>>>> on
>>>> > another VM but when I do so nothing is pasted. Any ideas?
>>>> >
>>>> > Thank you very much for this scripts/Windows VM builder.
>>>> >
>>>> > Regards
>>>>
>>>> By freeze do you mean it stops on the part where QWT tries to create the
>>>> private disk? This is documented in the QWT Known Issues section of the
>>>> README. Just exit that window with the error message and the
>>>> installation will proceed as normal. Besides that for Windows 10/Windows
>>>> Server 2019, you should not have to interact with any window or part of
>>>> the installation. Sometimes, QWT may also just crash upon boot causing
>>>> Windows to crash. This doesn't happen often, however, it is also
>>>> documented in the README. This is more likely to happen if you installed
>>>> Windows manually as you said because unstable QWT features like Qubes
>>>> Memory Manager (qmemman) are enabled by default which we disable in the
>>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that one).
>>>>
>>>> Due to that bug in making the private disk required, it's not possible
>>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>>> Otherwise, I would recommend for must users to build a template with the
>>>> software they want pre-installed and make AppVMs from that.
>>>>
>>>> Regarding copy/paste not working, it appears to work fine for others so
>>>> I would just suggest you restart the Windows qube or possibly make a new
>>>> one. If it's copying the data out correctly then there should be a
>>>> notification saying "Copied X bytes to the clipboard".
>>>>
>>>> You're welcome, Claudio!
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Elliot
>>>>
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "qubes-users" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to qubes-users+unsubscr...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/qubes-users/2de7254e-c22c-3275-cdfd-30cdacd86a67%40zohomail.eu
>>>> .
>>>
>>>
>>>
>>> I want to install Windows 10 from a DVD in a new HVM and have begun
>>> following this guide: https://www.qubes-os.org/doc/windows-vm/
>>>
>>> It says:
>>>
>>> “Create a new Qube:
>>> Name: Win10, Color: red
>>> Standalone Qube not based on a template
>>> Networking: sys-firewall (default)
>>> Launch settings after creation: check
>>> Click “OK”.”
>>>
>>> As I’m going to install Win 10 from a DVD, shall I then just follow the
>>> guide and choose “Launch settings after creation” or shall I choose
>>> “Install from device” ?
>>>
>>
>>
>> I have made a Windows dom

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

ons. 19. feb. 2020 kl. 15.51 skrev A E :

> tor. 13. feb. 2020 kl. 00.24 skrev M E :
>
>> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
>> qubes-users@googlegroups.com>:
>>
>>>
>>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>>> > ׁHi Elliot,
>>> >
>>> > I've downloaded again and succeeded creating the HVM.
>>> >
>>> > I had a Windows 10 HVM I built manually just booting from the ISO and
>>> where
>>> > I did not succeed installing the QWT (boot after the QWT install would
>>> > freeze).
>>> >
>>> > Would you recommend building a Template from this HVM?
>>> >
>>> > The big advantage I saw in this implementation was that I can
>>> confortably
>>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>>> Another
>>> > advantage of the QWT is that I can send files from Windows to any
>>> other
>>> > PV/HPV VM using qrexec.
>>> >
>>> > What's intriguing me is that copy/paste between VMs is not working.
>>> When I
>>> > ctl+shift+C on my Windows VM I see the popup saying I can ctl+shift+V
>>> on
>>> > another VM but when I do so nothing is pasted. Any ideas?
>>> >
>>> > Thank you very much for this scripts/Windows VM builder.
>>> >
>>> > Regards
>>>
>>> By freeze do you mean it stops on the part where QWT tries to create the
>>> private disk? This is documented in the QWT Known Issues section of the
>>> README. Just exit that window with the error message and the
>>> installation will proceed as normal. Besides that for Windows 10/Windows
>>> Server 2019, you should not have to interact with any window or part of
>>> the installation. Sometimes, QWT may also just crash upon boot causing
>>> Windows to crash. This doesn't happen often, however, it is also
>>> documented in the README. This is more likely to happen if you installed
>>> Windows manually as you said because unstable QWT features like Qubes
>>> Memory Manager (qmemman) are enabled by default which we disable in the
>>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that one).
>>>
>>> Due to that bug in making the private disk required, it's not possible
>>> to create templates for Windows 10/Windows Server 2019 anyway.
>>> Otherwise, I would recommend for must users to build a template with the
>>> software they want pre-installed and make AppVMs from that.
>>>
>>> Regarding copy/paste not working, it appears to work fine for others so
>>> I would just suggest you restart the Windows qube or possibly make a new
>>> one. If it's copying the data out correctly then there should be a
>>> notification saying "Copied X bytes to the clipboard".
>>>
>>> You're welcome, Claudio!
>>>
>>>
>>> Regards,
>>>
>>> Elliot
>>>
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "qubes-users" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to qubes-users+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/qubes-users/2de7254e-c22c-3275-cdfd-30cdacd86a67%40zohomail.eu
>>> .
>>
>>
>>
>> I want to install Windows 10 from a DVD in a new HVM and have begun
>> following this guide: https://www.qubes-os.org/doc/windows-vm/
>>
>> It says:
>>
>> “Create a new Qube:
>> Name: Win10, Color: red
>> Standalone Qube not based on a template
>> Networking: sys-firewall (default)
>> Launch settings after creation: check
>> Click “OK”.”
>>
>> As I’m going to install Win 10 from a DVD, shall I then just follow the
>> guide and choose “Launch settings after creation” or shall I choose
>> “Install from device” ?
>>
>
>
> I have made a Windows domain and downloaded and installed Windows 7 and
> Qubes Windows Tools by executing this script in dom0 according to this
> guide (link: https://github.com/elliotkillick/qvm-create-windows-qube ):
>
> chmod +x install.sh && ./install.sh
>
> And now I would like to know how to get further.
>
> I have made a thread here about making a Win10 HVM, so you are welcome to
> answer there instead (I have just made this post in attempt to get a
> quicker response):
>
> https://groups.google.com/forum/m/#!topic/qubes-users/78DgmWxZf80
>
> How to use the script of the download-windows.sh file ?

When I execute the script in the terminal, the different windows versions
are listed. But when I copy the label of one of them and paste it on the
line below it and press enter, the terminal says that it doesn’t recognize
the command.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUE4oGz-Z%2BSqcmaG%2BHC_aDWy7o6mux7PLqy-JSStMmS24A%40mail.gmail.com.

Re: [EXT] [qubes-users] How well does Qubes OS actually protect against key lockers ?

[A E]

tor. 20. feb. 2020 kl. 08.13 skrev Ulrich Windl <
ulrich.wi...@rz.uni-regensburg.de>:

> >>> A  schrieb am 19.02.2020 um 13:19 in Nachricht
>
> <6060_1582114749_5E4D27BD_6060_305_1_418aea73-f8b8-44bc-9152-b644e3ad2551@google
> roups.com>:
> > How well does Qubes OS actually protect against key lockers ?
>
> You mean key _loggers_?
>
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups
> > "qubes-users" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an
> > email to qubes-users+unsubscr...@googlegroups.com.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/qubes-users/418aea73-f8b8-44bc-9152-b644e3a
> > d2551%40googlegroups.com.
>
>
>
>
>
Yes, you’re right, I did not see that. 🙂

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUHYP2rpoHZGD%3D-%2BsMh8aMDKZc%3DOb0GXMuVYG5Xoq2z%3DYQ%40mail.gmail.com.

Re: [qubes-users] Re: qvm-create-windows-qube 2.0

[A E]

tor. 13. feb. 2020 kl. 00.24 skrev M E :

> søn. 26. jan. 2020 kl. 23.12 skrev 'Elliot Killick' via qubes-users <
> qubes-users@googlegroups.com>:
>
>>
>> On 2020-01-26 12:37, Claudio Chinicz wrote:
>> > ׁHi Elliot,
>> >
>> > I've downloaded again and succeeded creating the HVM.
>> >
>> > I had a Windows 10 HVM I built manually just booting from the ISO and
>> where
>> > I did not succeed installing the QWT (boot after the QWT install would
>> > freeze).
>> >
>> > Would you recommend building a Template from this HVM?
>> >
>> > The big advantage I saw in this implementation was that I can
>> confortably
>> > run my applications with 2GB (minimum) vs 6GB in my previous HVM.
>> Another
>> > advantage of the QWT is that I can send files from Windows to any other
>> > PV/HPV VM using qrexec.
>> >
>> > What's intriguing me is that copy/paste between VMs is not working.
>> When I
>> > ctl+shift+C on my Windows VM I see the popup saying I can ctl+shift+V
>> on
>> > another VM but when I do so nothing is pasted. Any ideas?
>> >
>> > Thank you very much for this scripts/Windows VM builder.
>> >
>> > Regards
>>
>> By freeze do you mean it stops on the part where QWT tries to create the
>> private disk? This is documented in the QWT Known Issues section of the
>> README. Just exit that window with the error message and the
>> installation will proceed as normal. Besides that for Windows 10/Windows
>> Server 2019, you should not have to interact with any window or part of
>> the installation. Sometimes, QWT may also just crash upon boot causing
>> Windows to crash. This doesn't happen often, however, it is also
>> documented in the README. This is more likely to happen if you installed
>> Windows manually as you said because unstable QWT features like Qubes
>> Memory Manager (qmemman) are enabled by default which we disable in the
>> qvm-create-windows-qube.sh script (Thanks to @brendanhoar for that one).
>>
>> Due to that bug in making the private disk required, it's not possible
>> to create templates for Windows 10/Windows Server 2019 anyway.
>> Otherwise, I would recommend for must users to build a template with the
>> software they want pre-installed and make AppVMs from that.
>>
>> Regarding copy/paste not working, it appears to work fine for others so
>> I would just suggest you restart the Windows qube or possibly make a new
>> one. If it's copying the data out correctly then there should be a
>> notification saying "Copied X bytes to the clipboard".
>>
>> You're welcome, Claudio!
>>
>>
>> Regards,
>>
>> Elliot
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "qubes-users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to qubes-users+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/qubes-users/2de7254e-c22c-3275-cdfd-30cdacd86a67%40zohomail.eu
>> .
>
>
>
> I want to install Windows 10 from a DVD in a new HVM and have begun
> following this guide: https://www.qubes-os.org/doc/windows-vm/
>
> It says:
>
> “Create a new Qube:
> Name: Win10, Color: red
> Standalone Qube not based on a template
> Networking: sys-firewall (default)
> Launch settings after creation: check
> Click “OK”.”
>
> As I’m going to install Win 10 from a DVD, shall I then just follow the
> guide and choose “Launch settings after creation” or shall I choose
> “Install from device” ?
>


I have made a Windows domain and downloaded and installed Windows 7 and
Qubes Windows Tools by executing this script in dom0 according to this
guide (link: https://github.com/elliotkillick/qvm-create-windows-qube ):

chmod +x install.sh && ./install.sh

And now I would like to know how to get further.

I have made a thread here about making a Win10 HVM, so you are welcome to
answer there instead (I have just made this post in attempt to get a
quicker response):

https://groups.google.com/forum/m/#!topic/qubes-users/78DgmWxZf80

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUGiB98HmgZ8Pm9%2B1qbn-SzZn55uBHuD9sXr4pj9R%2BDD%2BA%40mail.gmail.com.

Re: [qubes-users] Re: How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

ons. 19. feb. 2020 kl. 11.16 skrev Eva Star :

> Solution:
> https://unix.stackexchange.com/a/135098
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/uMl6_djER5E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/d700e686-86fc-445e-9f2d-47273cc48242%40googlegroups.com
> 
> .



I gave up after trying to install a KDE desktop as I didn’t know how to
make it work. Which was before I received suggestions on this.

Instead I chose to reinstall Qubes and use a password that only consist of
ASCII signs (as the xscreensaver doesn’t seem to be able to handle other
signs in the installed version that Qubes OS 4.0.3 comes with) and use an
easy way to shift the keyboard layout to the language I used to enter the
password with.

That works fine.

But I would prefer a screensaver that also could handle other signs than
just ASCII. As it would make it possible to construct a password that
consist of letters from a non latin alphabet. Which would mean that a
sentence in one language, would end up being rather random letters in
another language. And thereby make it more difficult to use online
wordbooks to break the code in case someone would try to do so.

And it would also make it possible to construct a password that consist of
letters from more than one type of alphabet to make it even more difficult
to break the code.

But of cause, with a key locker that can be overcome.

How well does Qubes OS actually protect against key lockers ?

I’ll make a new thread with that question...

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUHq3_g4EMLEbVszci4N371fYiOYEDkuS1OdMFHn-xPcgw%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tir. 18. feb. 2020 kl. 21.27 skrev A E :

> søn. 16. feb. 2020 kl. 08.34 skrev A E :
>
>> søn. 16. feb. 2020 kl. 05.33 skrev Thierry Laurion - Insurgo Technologies
>> Libres / Open Technologies :
>>
>>>
>>>
>>> On February 15, 2020 2:18:33 PM UTC, A E  wrote:
>>> >fre. 14. feb. 2020 kl. 12.56 skrev unman :
>>> >
>>> >> On Fri, Feb 14, 2020 at 08:19:13AM +0100, A E wrote:
>>> >> > Okay, I read your message again.
>>> >> >
>>> >> > It shall just turn up in the file list of dom0.
>>> >> >
>>> >> > I???ll look later.
>>> >> >
>>> >> >
>>> >> > fre. 14. feb. 2020 kl. 08.14 skrev A E :
>>> >> >
>>> >> > > Okay, thanks.
>>> >> > >
>>> >> > > How can I see if the "install.sh" file has been created in dom0 ?
>>> >> > >
>>> >> > >
>>> >>
>>> >> The convention here is not to top-post.
>>> >> Please scroll to the bottom of the message before you start typing.
>>> >Or
>>> >> reply inline.
>>> >> It only takes you seconds, makes it much easier to follow threads,
>>> >and
>>> >> cumulatively saves your fellow users hours.
>>> >> Thanks.
>>> >> unman
>>> >>
>>> >> --
>>> >> You received this message because you are subscribed to a topic in
>>> >the
>>> >> Google Groups "qubes-users" group.
>>> >> To unsubscribe from this topic, visit
>>> >>
>>> >https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>>> >> To unsubscribe from this group and all its topics, send an email to
>>> >> qubes-users+unsubscr...@googlegroups.com.
>>> >> To view this discussion on the web visit
>>> >>
>>> >
>>> https://groups.google.com/d/msgid/qubes-users/20200214115648.GA688%40thirdeyesecurity.org
>>> >> .
>>> >>
>>> >
>>> >
>>> >Yes, install.sh was copied to dom0. I just thought the terminal would
>>> >say
>>> >so after it did this.
>>> >
>>> >The pc is downloading now.
>>> >
>>> >I wonder why Windows 7 has to be installed before Windows 10...
>>> >especially
>>> >as Microsoft has stopped supporting it and it takes about 2 hours to
>>> >download it and I don’t have any product code for it. So maybe I can’t
>>> >even
>>> >use it.
>>>
>>> Has someone tried to active with a windows 7 license?
>>>
>>> >
>>> >Besides that, I appreciate and thanks Elliot Killick for the easy to
>>> >use
>>> >installation script.
>>>
>>> -- Sent from /e/ Mail
>>>
>>
>> To get through the whole installation process, can I then:
>>
>> 1)  Somehow continue the installation process and if so how... ?
>>
>> Or
>>
>> 2)  Do I have to start the installation process from scratch again ?
>>  And if so, shall I delete more than the windows domain, and if so
>> what ?
>>
>
> I have just deleted the win-domain and run the command again.
>
> I got Win 7 and the Qubes Win Tools installed, but got some errors on the
> way...
>
> This file does not exist: /var/lib/qubes/dom0-updates/var/cache
>
> This folder does not exist: /var/lib/qubes/dom0-updates
>
> Also:
>
> “Failed to set locale, defaulting to C”
>
> Three times: “UnicodeEncodeError: ‘ascii’ codec can’t encode character
> ‘\xe6’ in position ...: ordinal not in range(128)”
>
> Eight times: “UnicodeEncodeError: ‘ascii’ codec can’t encode character
> ‘\xf8’ in position ...: ordinal not in range(128)”
>
> Ends with: “Installation complete”
>
>
> What shall I do now... ?
>
> I can’t see how I can start Windows 7 in the Qubes Menu.
>
> And the guide doesn’t say anything about how to open Windows 7 or what to
> do next in relation to install Windows 10.
>

I should probably also mention, that I haven’t tried to restart the pc
afterwards in case you would ask to the content of the script that the
terminal has outlined through the installation process.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEg6D4EY8Z3OZmUwmGT4GKunvq7f%3DSQLEPzGPsHG%2BiSbQ%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

søn. 16. feb. 2020 kl. 08.34 skrev A E :

> søn. 16. feb. 2020 kl. 05.33 skrev Thierry Laurion - Insurgo Technologies
> Libres / Open Technologies :
>
>>
>>
>> On February 15, 2020 2:18:33 PM UTC, A E  wrote:
>> >fre. 14. feb. 2020 kl. 12.56 skrev unman :
>> >
>> >> On Fri, Feb 14, 2020 at 08:19:13AM +0100, A E wrote:
>> >> > Okay, I read your message again.
>> >> >
>> >> > It shall just turn up in the file list of dom0.
>> >> >
>> >> > I???ll look later.
>> >> >
>> >> >
>> >> > fre. 14. feb. 2020 kl. 08.14 skrev A E :
>> >> >
>> >> > > Okay, thanks.
>> >> > >
>> >> > > How can I see if the "install.sh" file has been created in dom0 ?
>> >> > >
>> >> > >
>> >>
>> >> The convention here is not to top-post.
>> >> Please scroll to the bottom of the message before you start typing.
>> >Or
>> >> reply inline.
>> >> It only takes you seconds, makes it much easier to follow threads,
>> >and
>> >> cumulatively saves your fellow users hours.
>> >> Thanks.
>> >> unman
>> >>
>> >> --
>> >> You received this message because you are subscribed to a topic in
>> >the
>> >> Google Groups "qubes-users" group.
>> >> To unsubscribe from this topic, visit
>> >>
>> >https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>> >> To unsubscribe from this group and all its topics, send an email to
>> >> qubes-users+unsubscr...@googlegroups.com.
>> >> To view this discussion on the web visit
>> >>
>> >
>> https://groups.google.com/d/msgid/qubes-users/20200214115648.GA688%40thirdeyesecurity.org
>> >> .
>> >>
>> >
>> >
>> >Yes, install.sh was copied to dom0. I just thought the terminal would
>> >say
>> >so after it did this.
>> >
>> >The pc is downloading now.
>> >
>> >I wonder why Windows 7 has to be installed before Windows 10...
>> >especially
>> >as Microsoft has stopped supporting it and it takes about 2 hours to
>> >download it and I don’t have any product code for it. So maybe I can’t
>> >even
>> >use it.
>>
>> Has someone tried to active with a windows 7 license?
>>
>> >
>> >Besides that, I appreciate and thanks Elliot Killick for the easy to
>> >use
>> >installation script.
>>
>> -- Sent from /e/ Mail
>>
>
> To get through the whole installation process, can I then:
>
> 1)  Somehow continue the installation process and if so how... ?
>
> Or
>
> 2)  Do I have to start the installation process from scratch again ?
>  And if so, shall I delete more than the windows domain, and if so
> what ?
>

I have just deleted the win-domain and run the command again.

I got Win 7 and the Qubes Win Tools installed, but got some errors on the
way...

This file does not exist: /var/lib/qubes/dom0-updates/var/cache

This folder does not exist: /var/lib/qubes/dom0-updates

Also:

“Failed to set locale, defaulting to C”

Three times: “UnicodeEncodeError: ‘ascii’ codec can’t encode character
‘\xe6’ in position ...: ordinal not in range(128)”

Eight times: “UnicodeEncodeError: ‘ascii’ codec can’t encode character
‘\xf8’ in position ...: ordinal not in range(128)”

Ends with: “Installation complete”


What shall I do now... ?

I can’t see how I can start Windows 7 in the Qubes Menu.

And the guide doesn’t say anything about how to open Windows 7 or what to
do next in relation to install Windows 10.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUHHBDYMoK3nEOT9L3Pwuvo1n-MqThRcA5BMv5hpC6JmBg%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

søn. 16. feb. 2020 kl. 23.55 skrev A E :

> søn. 16. feb. 2020 kl. 19.01 skrev Chris Laprise :
>
>> On 2/16/20 10:32 AM, A E wrote:
>> > søn. 16. feb. 2020 kl. 16.18 skrev Chris Laprise > > <mailto:tas...@posteo.net>>:
>> >
>> > On 2/15/20 10:20 AM, A E wrote:
>> >  > If it isn’t possible to change the settings of the screensaver
>> that
>> >  > Qubes OS is actually using, then I would like to hear how I can
>> > either
>> >  > disable or delete it in Qubes ?
>> >
>> > The setting to disable screensaver does work for KDE in dom0.
>> Switching
>> > to KDE has fixed a number of GUI problems for me.
>> >
>> > --
>> > Chris Laprise, tas...@posteo.net <mailto:tas...@posteo.net>
>> > https://github.com/tasket
>> > https://twitter.com/ttaskett
>> > PGP: BEE2 20C5 356E 764A 73EB  4AB3 1DC4 D106 F07F 1886
>> >
>> >
>> > Okay, how do I switch to KDE ?
>> >
>> > And what are the cons with switching to KDE... ?
>> >
>> > I shall probably mention that I’m a Linux and Qubes newbie.
>>
>> This guide only requires a few steps in the dom0 terminal:
>>
>> https://www.qubes-os.org/doc/kde/
>>
>> Make sure you also do the lightdm->sddm changes because lightdm is where
>> some of the problems originate.
>>
>> The downsides to KDE are that it uses about 200MB more RAM (IMO, very
>> much worth it) and the Network Manager applet icon appears blank (its
>> still easy to use once you know its there in the systray).
>>
>> --
>> Chris Laprise, tas...@posteo.net
>> https://github.com/tasket
>> https://twitter.com/ttaskett
>> PGP: BEE2 20C5 356E 764A 73EB  4AB3 1DC4 D106 F07F 1886
>>
>
> Okay, I have seen here (link: https://m.youtube.com/watch?v=fo45bo1jvZI )
> that new versions of KDE uses less ram than XFCE.
>
> Which version of KDE do you use in Qubes OS ?
>


I have tried to install KDE in dom0 by using this command:

sudo qubes-dom0-update @kde-desktop-qubes

Then the terminal returned an error on the first line: As far as I remember
(I can only see the last 1.000 lines in the terminal), it returned
something like it couldn’t find or edit a specific xml file.

And then the installation process continued and got completed. I then
restarted the pc, and the only change I can see, is that there appear some
more program icons under Qubes menu -> System Tools.

For example “KDE System Settings”.

So as the desktop environment seems to look almost as before, I guess the
installation haven’t run properly, or am I wrong... ?

But in either case, I would like to know what I should do now.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUFo5tc9ukJWeTdGNGDNpoSe-n5DG%3Du6%3DGezhNCZY%2B-aBQ%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

søn. 16. feb. 2020 kl. 19.01 skrev Chris Laprise :

> On 2/16/20 10:32 AM, A E wrote:
> > søn. 16. feb. 2020 kl. 16.18 skrev Chris Laprise  > <mailto:tas...@posteo.net>>:
> >
> > On 2/15/20 10:20 AM, A E wrote:
> >  > If it isn’t possible to change the settings of the screensaver
> that
> >  > Qubes OS is actually using, then I would like to hear how I can
> > either
> >  > disable or delete it in Qubes ?
> >
> > The setting to disable screensaver does work for KDE in dom0.
> Switching
> > to KDE has fixed a number of GUI problems for me.
> >
> > --
> > Chris Laprise, tas...@posteo.net <mailto:tas...@posteo.net>
> > https://github.com/tasket
> > https://twitter.com/ttaskett
> > PGP: BEE2 20C5 356E 764A 73EB  4AB3 1DC4 D106 F07F 1886
> >
> >
> > Okay, how do I switch to KDE ?
> >
> > And what are the cons with switching to KDE... ?
> >
> > I shall probably mention that I’m a Linux and Qubes newbie.
>
> This guide only requires a few steps in the dom0 terminal:
>
> https://www.qubes-os.org/doc/kde/
>
> Make sure you also do the lightdm->sddm changes because lightdm is where
> some of the problems originate.
>
> The downsides to KDE are that it uses about 200MB more RAM (IMO, very
> much worth it) and the Network Manager applet icon appears blank (its
> still easy to use once you know its there in the systray).
>
> --
> Chris Laprise, tas...@posteo.net
> https://github.com/tasket
> https://twitter.com/ttaskett
> PGP: BEE2 20C5 356E 764A 73EB  4AB3 1DC4 D106 F07F 1886
>

Okay, I have seen here (link: https://m.youtube.com/watch?v=fo45bo1jvZI )
that new versions of KDE uses less ram than XFCE.

Which version of KDE do you use in Qubes OS ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEj7t%2BmEkFBAsS81C6HjCuxJpRePAbJv5GfSAk6C5KCjw%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

søn. 16. feb. 2020 kl. 16.18 skrev Chris Laprise :

> On 2/15/20 10:20 AM, A E wrote:
> > If it isn’t possible to change the settings of the screensaver that
> > Qubes OS is actually using, then I would like to hear how I can either
> > disable or delete it in Qubes ?
>
> The setting to disable screensaver does work for KDE in dom0. Switching
> to KDE has fixed a number of GUI problems for me.
>
> --
> Chris Laprise, tas...@posteo.net
> https://github.com/tasket
> https://twitter.com/ttaskett
> PGP: BEE2 20C5 356E 764A 73EB  4AB3 1DC4 D106 F07F 1886
>

Okay, how do I switch to KDE ?

And what are the cons with switching to KDE... ?

I shall probably mention that I’m a Linux and Qubes newbie.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUGhoKXDETHbhEXjW%3DW7cRX_V7bRnGBwi%3DSiP2BMkEFrSw%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

søn. 16. feb. 2020 kl. 05.33 skrev Thierry Laurion - Insurgo Technologies
Libres / Open Technologies :

>
>
> On February 15, 2020 2:18:33 PM UTC, A E  wrote:
> >fre. 14. feb. 2020 kl. 12.56 skrev unman :
> >
> >> On Fri, Feb 14, 2020 at 08:19:13AM +0100, A E wrote:
> >> > Okay, I read your message again.
> >> >
> >> > It shall just turn up in the file list of dom0.
> >> >
> >> > I???ll look later.
> >> >
> >> >
> >> > fre. 14. feb. 2020 kl. 08.14 skrev A E :
> >> >
> >> > > Okay, thanks.
> >> > >
> >> > > How can I see if the "install.sh" file has been created in dom0 ?
> >> > >
> >> > >
> >>
> >> The convention here is not to top-post.
> >> Please scroll to the bottom of the message before you start typing.
> >Or
> >> reply inline.
> >> It only takes you seconds, makes it much easier to follow threads,
> >and
> >> cumulatively saves your fellow users hours.
> >> Thanks.
> >> unman
> >>
> >> --
> >> You received this message because you are subscribed to a topic in
> >the
> >> Google Groups "qubes-users" group.
> >> To unsubscribe from this topic, visit
> >>
> >https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
> >> To unsubscribe from this group and all its topics, send an email to
> >> qubes-users+unsubscr...@googlegroups.com.
> >> To view this discussion on the web visit
> >>
> >
> https://groups.google.com/d/msgid/qubes-users/20200214115648.GA688%40thirdeyesecurity.org
> >> .
> >>
> >
> >
> >Yes, install.sh was copied to dom0. I just thought the terminal would
> >say
> >so after it did this.
> >
> >The pc is downloading now.
> >
> >I wonder why Windows 7 has to be installed before Windows 10...
> >especially
> >as Microsoft has stopped supporting it and it takes about 2 hours to
> >download it and I don’t have any product code for it. So maybe I can’t
> >even
> >use it.
>
> Has someone tried to active with a windows 7 license?
>
> >
> >Besides that, I appreciate and thanks Elliot Killick for the easy to
> >use
> >installation script.
>
> -- Sent from /e/ Mail
>

To get through the whole installation process, can I then:

1)  Somehow continue the installation process and if so how... ?

Or

2)  Do I have to start the installation process from scratch again ?
 And if so, shall I delete more than the windows domain, and if so what
?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUH7vPCt1n8JoovXgnhtwx8HUidrJ8KO61cjPG%3DJsB%3DKeQ%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

søn. 16. feb. 2020 kl. 06.55 skrev 'awokd' via qubes-users <
qubes-users@googlegroups.com>:

> A E:
> > lør. 15. feb. 2020 kl. 16.07 skrev A E :
>
> >> It didn’t help to set “lock screen after” to 720. It still locks
> >> immediately when the screen blanks.
> >>
> >> I wonder if I actually have changed the settings of the screensaver that
> >> Qubes uses at dom0, or just a unused one in the app menu similar to the
> >> network manager in the same menu.
> >>
> > If it isn’t possible to change the settings of the screensaver that Qubes
> > OS is actually using, then I would like to hear how I can either disable
> or
> > delete it in Qubes ?
> >
> If you're changing the settings in Qubes menu/System Tools/Screensaver,
> once you uncheck "lock after" go to File/Restart Daemon. Otherwise, your
> changes don't take effect until a reboot.
>
> --
> - don't top post
> Mailing list etiquette:
> - trim quoted reply to only relevant portions
> - when possible, copy and paste text instead of screenshots
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/uMl6_djER5E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/5a954c8b-7a17-681b-7d9d-951caa261d1a%40danwin1210.me
> .
>

I’ll try that.

But I have tried to change the “blank after” and “lock after” to 720
minutes and restart the pc afterwards. And there still seems to go just
about 10 minutes before the screen goes blank and lock. And I have checked
that the settings of the screensaver still say 720 after the restart, and
it does. But it doesn’t seem to make any difference...

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUF9h604UTgmjXdUQewMoBdRVkKu-dLOWDfgkC8-TdjpbQ%40mail.gmail.com.

Re: [qubes-users] How to install and get Linux Mint running in Qubes OS 4.0.3 ?

[A E]

søn. 16. feb. 2020 kl. 02.50 skrev unman :

> On Sat, Feb 15, 2020 at 07:50:53AM -0800, A wrote:
> > 1)  How to install and get Linux Mint running in Qubes OS 4.0.3 ?
> >
> Download a mint iso in to a qube - make sure you have enough space to do
> this - up Private storage size if needed.
>
> Create an HVM and boot it from a Mint iso. (Instructions on this can be
> found here - https://www.qubes-os.org/doc/standalone-and-hvm/ )
> Or use the GUI - in Qube Manager, select Qube - "Create New qube".
> Give it name and set type "Empty  Standalone qube.."
> Select "open Settings after creation."
> In Settings window go to Advanced pane and set initial memory to 4000MB
> - you can always reduce after installation.
> Then select "Boot qube from CDROM" button, and select the qube where you
> downloaded the Mint iso.
> On start you should see Mint boot in live mode.
> Note the IP address of the new mint qube (either from Qube Manager , or
> using `qvm-ls -n `
> Edit the Network settings for ipv4 to "manual" and enter the IP address
> and gateway. For DNS you can use 9.9.9.9
> Select option to install to disk.
>
> After installation, shutdown the qube.
> Restart.
> Your new Mint qube should start up.
> If you get a black screen, kill it. In terminal in dom0 , use
> `qvm-features  video-model cirrus` and restart.
>
> Since Mint is based off Ubuntu, you can try installing some qubes
> packages built for Ubuntu , to et copy/paste etc working. (I have
> packages at qubes.3isec.org you could try, but I haven't tested this
> myself - i suggest you get Mint running properly, then clone it and try
> installing packages in to the clone.)
>
> > 2)  Is it possible to use Linux Mint for surfing the net in a secure
> way, and if so how ?
> >
>
> ???
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/jBHgC2TFggY/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20200216015008.GA8620%40thirdeyesecurity.org
> .
>

Thank you very much for your detailed guide.

Just to be sure: Shall I create the new qube the same way if I install
Linux Mint from a DVD ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUE8EXNXmdUY0Vb%2B3PiOYgNnU%3Di94_LeE_3R7Uy7z_nY3g%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

lør. 15. feb. 2020 kl. 16.07 skrev A E :

> tor. 13. feb. 2020 kl. 21.10 skrev A E :
>
>> tor. 13. feb. 2020 kl. 18.48 skrev Mike Keehan :
>>
>>>
>>>
>>> On 2/13/20 5:27 PM, A E wrote:
>>> > tor. 13. feb. 2020 kl. 11.11 skrev A >> > <mailto:anneeyr...@gmail.com>>:
>>> >
>>> > How to set the screensaver to either show keyboard language or not
>>> > to lock screen as default ?
>>> >
>>> > I have tried to set it to not lock the screen by uncheck it in the
>>> > Screensaver settings. But it still continues to lock the screen.
>>> >
>>> > --
>>> > You received this message because you are subscribed to a topic in
>>> > the Google Groups "qubes-users" group.
>>> > To unsubscribe from this topic, visit
>>> >
>>> https://groups.google.com/d/topic/qubes-users/uMl6_djER5E/unsubscribe.
>>> > To unsubscribe from this group and all its topics, send an email to
>>> > qubes-users+unsubscr...@googlegroups.com
>>> > <mailto:qubes-users%2bunsubscr...@googlegroups.com>.
>>> > To view this discussion on the web visit
>>> >
>>> https://groups.google.com/d/msgid/qubes-users/4ba32760-f4ea-4f1f-b92f-588306d2fa5d%40googlegroups.com
>>> .
>>> >
>>> >
>>> > Every time the screensaver lock the screen, I need to reset/restart
>>> the
>>> > pc as I can’t know which keyboard layout is used and that is just a
>>> > little bit annoying ! 😕
>>> >
>>> > So I hope someone can explain to me how I can get it to show the
>>> > keyboard layout or not locking the screen.
>>> >
>>> > If that isn’t possible, can I then somehow disable or uninstall the
>>> > screensaver ?
>>> >
>>>
>>> In screensaver preferences, set "Lock screen after" to 0 minutes.
>>>
>>>
>> You’re right, I forgot once again that Linux/Qubes OS consist of small
>> programs that is made by different other creators.
>>
>> Setting “lock screen after” 0 minutes just makes the screensaver to lock
>> immediately when the screensaver gets activated.
>>
>> I have wrote to the creator of the screensaver, and he says X11 sucks and
>> makes it impossible to get the keyboard layout showed.
>>
>> So I have to disable the lock.
>>
>> One option is to set the lockTimeout to a large number so that it won’t
>> lock. lockTimeout control have long after a blank screen the lock will be
>> activated.
>>
>> Another solution is to disable or uninstall the program.
>>
>>
>
> It didn’t help to set “lock screen after” to 720. It still locks
> immediately when the screen blanks.
>
> I wonder if I actually have changed the settings of the screensaver that
> Qubes uses at dom0, or just a unused one in the app menu similar to the
> network manager in the same menu.
>
If it isn’t possible to change the settings of the screensaver that Qubes
OS is actually using, then I would like to hear how I can either disable or
delete it in Qubes ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUE157Kb%3D9TL7me%2BxWQD7fRdnsqd42nG-dKPwTwKdwKp5w%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

tor. 13. feb. 2020 kl. 21.10 skrev A E :

> tor. 13. feb. 2020 kl. 18.48 skrev Mike Keehan :
>
>>
>>
>> On 2/13/20 5:27 PM, A E wrote:
>> > tor. 13. feb. 2020 kl. 11.11 skrev A > > <mailto:anneeyr...@gmail.com>>:
>> >
>> > How to set the screensaver to either show keyboard language or not
>> > to lock screen as default ?
>> >
>> > I have tried to set it to not lock the screen by uncheck it in the
>> > Screensaver settings. But it still continues to lock the screen.
>> >
>> > --
>> > You received this message because you are subscribed to a topic in
>> > the Google Groups "qubes-users" group.
>> > To unsubscribe from this topic, visit
>> >
>> https://groups.google.com/d/topic/qubes-users/uMl6_djER5E/unsubscribe.
>> > To unsubscribe from this group and all its topics, send an email to
>> > qubes-users+unsubscr...@googlegroups.com
>> > <mailto:qubes-users%2bunsubscr...@googlegroups.com>.
>> > To view this discussion on the web visit
>> >
>> https://groups.google.com/d/msgid/qubes-users/4ba32760-f4ea-4f1f-b92f-588306d2fa5d%40googlegroups.com
>> .
>> >
>> >
>> > Every time the screensaver lock the screen, I need to reset/restart the
>> > pc as I can’t know which keyboard layout is used and that is just a
>> > little bit annoying ! 😕
>> >
>> > So I hope someone can explain to me how I can get it to show the
>> > keyboard layout or not locking the screen.
>> >
>> > If that isn’t possible, can I then somehow disable or uninstall the
>> > screensaver ?
>> >
>>
>> In screensaver preferences, set "Lock screen after" to 0 minutes.
>>
>>
> You’re right, I forgot once again that Linux/Qubes OS consist of small
> programs that is made by different other creators.
>
> Setting “lock screen after” 0 minutes just makes the screensaver to lock
> immediately when the screensaver gets activated.
>
> I have wrote to the creator of the screensaver, and he says X11 sucks and
> makes it impossible to get the keyboard layout showed.
>
> So I have to disable the lock.
>
> One option is to set the lockTimeout to a large number so that it won’t
> lock. lockTimeout control have long after a blank screen the lock will be
> activated.
>
> Another solution is to disable or uninstall the program.
>
>

It didn’t help to set “lock screen after” to 720. It still locks
immediately when the screen blanks.

I wonder if I actually have changed the settings of the screensaver that
Qubes uses at dom0, or just a unused one in the app menu similar to the
network manager in the same menu.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEKF_i1Nt-03sYMj9%2BR41%2BTY2_Nf1dHwmdv%2BKvxC0GTUQ%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

fre. 14. feb. 2020 kl. 12.56 skrev unman :

> On Fri, Feb 14, 2020 at 08:19:13AM +0100, A E wrote:
> > Okay, I read your message again.
> >
> > It shall just turn up in the file list of dom0.
> >
> > I???ll look later.
> >
> >
> > fre. 14. feb. 2020 kl. 08.14 skrev A E :
> >
> > > Okay, thanks.
> > >
> > > How can I see if the "install.sh" file has been created in dom0 ?
> > >
> > >
>
> The convention here is not to top-post.
> Please scroll to the bottom of the message before you start typing. Or
> reply inline.
> It only takes you seconds, makes it much easier to follow threads, and
> cumulatively saves your fellow users hours.
> Thanks.
> unman
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20200214115648.GA688%40thirdeyesecurity.org
> .
>


Yes, install.sh was copied to dom0. I just thought the terminal would say
so after it did this.

The pc is downloading now.

I wonder why Windows 7 has to be installed before Windows 10... especially
as Microsoft has stopped supporting it and it takes about 2 hours to
download it and I don’t have any product code for it. So maybe I can’t even
use it.

Besides that, I appreciate and thanks Elliot Killick for the easy to use
installation script.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEegrqObpRdyVPgj_ptBsPqt05bWS5rsWMKEFuYNMK5JQ%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

Okay, I read your message again.

It shall just turn up in the file list of dom0.

I’ll look later.


fre. 14. feb. 2020 kl. 08.14 skrev A E :

> Okay, thanks.
>
> How can I see if the "install.sh" file has been created in dom0 ?
>
>
> fre. 14. feb. 2020 kl. 00.52 skrev unman :
>
>> On Thu, Feb 13, 2020 at 10:33:45PM +0100, A E wrote:
>> > tor. 13. feb. 2020 kl. 17.59 skrev M E :
>> >
>> > > tor. 13. feb. 2020 kl. 17.12 skrev unman > >:
>> > >
>> > >> On Thu, Feb 13, 2020 at 04:48:42PM +0100, M E wrote:
>> > >> > tor. 13. feb. 2020 kl. 13.54 skrev M E :
>> > >> >
>> > >> >
>> > >> > I have tried using the unsafe browser (as this domain also offer a
>> file
>> > >> > manager as a shortcut) and safe the file in the domains download
>> folder.
>> > >> > Here the file is suggested to be saved as ???install.sh???.
>> > >> >
>> > >> > And then I tried to execute the following script in dom0:
>> > >> >
>> > >> > qvm-run -p --filter-escape-chars --no-color-output
>> > >> >  "cat
>> '/home/user/Downloads/install.sh'" >
>> > >> > install.sh
>> > >> >
>> > >> > But as expected, this part of the script has to be replaced by
>> something
>> > >> > else:
>> > >> >
>> > >> > 
>> > >> >
>> > >> > I guess with something like a partition letter, but as I don???t
>> know
>> > >> more
>> > >> > than this path; ???'/home/user/Downloads/install.sh'??? I need to
>> be
>> > >> told what
>> > >> > I should write here instead.
>> > >> >
>> > >> > So what shall I replace it with ?
>> > >> >
>> > >>
>> > >> That's the *name* of the qube where the script is located.
>> > >>
>> > >> --
>> > >> You received this message because you are subscribed to a topic in
>> the
>> > >> Google Groups "qubes-users" group.
>> > >> To unsubscribe from this topic, visit
>> > >>
>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>> > >> To unsubscribe from this group and all its topics, send an email to
>> > >> qubes-users+unsubscr...@googlegroups.com.
>> > >> To view this discussion on the web visit
>> > >>
>> https://groups.google.com/d/msgid/qubes-users/20200213161211.GA29023%40thirdeyesecurity.org
>> > >> .
>> > >>
>> > >
>> > > Thank you.
>> > >
>> > > I have tried to execute it in the user dom0, both:
>> > >
>> > > qvm-run -p --filter-escape-chars --no-color-output untrusted "cat
>> > > '/home/user/Downloads/install.sh'" > install.sh
>> > >
>> > > and
>> > >
>> > > qvm-run -p --filter-escape-chars --no-color-output ???untrusted???
>> "cat
>> > > '/home/user/Downloads/install.sh'" > install.sh
>> > >
>> > > It doesn???t seem to do anything...
>> > >
>> > > Shall I run it with root access instead, or what shall I do ?
>> > >
>> >
>> > When I try to use ???*??? around the domaine name, it says there
>> doesn???t exist
>> > any domain with that name. And I have checked it was spelled correctly.
>> And
>> > I get the same result if I use the root account.
>> >
>> > So I still need help to get further.
>> >
>>
>> You don't need anything around the name of the qube. Just use the name.
>> Nor do you need root (unless you are doing this somewhere without file
>> access in which case you will see an "access denied " error
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "qubes-users" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> qubes-users+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/qubes-users/20200213235216.GB30643%40thirdeyesecurity.org
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEuffPc5ZtDYU7KajHAdJRRCAZeUAXywry2GWiNvGUBFA%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

Okay, thanks.

How can I see if the "install.sh" file has been created in dom0 ?


fre. 14. feb. 2020 kl. 00.52 skrev unman :

> On Thu, Feb 13, 2020 at 10:33:45PM +0100, A E wrote:
> > tor. 13. feb. 2020 kl. 17.59 skrev M E :
> >
> > > tor. 13. feb. 2020 kl. 17.12 skrev unman :
> > >
> > >> On Thu, Feb 13, 2020 at 04:48:42PM +0100, M E wrote:
> > >> > tor. 13. feb. 2020 kl. 13.54 skrev M E :
> > >> >
> > >> >
> > >> > I have tried using the unsafe browser (as this domain also offer a
> file
> > >> > manager as a shortcut) and safe the file in the domains download
> folder.
> > >> > Here the file is suggested to be saved as ???install.sh???.
> > >> >
> > >> > And then I tried to execute the following script in dom0:
> > >> >
> > >> > qvm-run -p --filter-escape-chars --no-color-output
> > >> >  "cat '/home/user/Downloads/install.sh'"
> >
> > >> > install.sh
> > >> >
> > >> > But as expected, this part of the script has to be replaced by
> something
> > >> > else:
> > >> >
> > >> > 
> > >> >
> > >> > I guess with something like a partition letter, but as I don???t
> know
> > >> more
> > >> > than this path; ???'/home/user/Downloads/install.sh'??? I need to be
> > >> told what
> > >> > I should write here instead.
> > >> >
> > >> > So what shall I replace it with ?
> > >> >
> > >>
> > >> That's the *name* of the qube where the script is located.
> > >>
> > >> --
> > >> You received this message because you are subscribed to a topic in the
> > >> Google Groups "qubes-users" group.
> > >> To unsubscribe from this topic, visit
> > >> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe
> .
> > >> To unsubscribe from this group and all its topics, send an email to
> > >> qubes-users+unsubscr...@googlegroups.com.
> > >> To view this discussion on the web visit
> > >>
> https://groups.google.com/d/msgid/qubes-users/20200213161211.GA29023%40thirdeyesecurity.org
> > >> .
> > >>
> > >
> > > Thank you.
> > >
> > > I have tried to execute it in the user dom0, both:
> > >
> > > qvm-run -p --filter-escape-chars --no-color-output untrusted "cat
> > > '/home/user/Downloads/install.sh'" > install.sh
> > >
> > > and
> > >
> > > qvm-run -p --filter-escape-chars --no-color-output ???untrusted??? "cat
> > > '/home/user/Downloads/install.sh'" > install.sh
> > >
> > > It doesn???t seem to do anything...
> > >
> > > Shall I run it with root access instead, or what shall I do ?
> > >
> >
> > When I try to use ???*??? around the domaine name, it says there
> doesn???t exist
> > any domain with that name. And I have checked it was spelled correctly.
> And
> > I get the same result if I use the root account.
> >
> > So I still need help to get further.
> >
>
> You don't need anything around the name of the qube. Just use the name.
> Nor do you need root (unless you are doing this somewhere without file
> access in which case you will see an "access denied " error
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/20200213235216.GB30643%40thirdeyesecurity.org
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUFp5q8VGWhP9eVyd70HhCUwLEkm696hHFj2gTkVoprjMA%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

tor. 13. feb. 2020 kl. 23.49 skrev Mike Keehan :

> On 2/13/20 8:10 PM, A E wrote:
> > tor. 13. feb. 2020 kl. 18.48 skrev Mike Keehan  > <mailto:m...@keehan.net>>:
> >
> >
> >
> > On 2/13/20 5:27 PM, A E wrote:
> >  > tor. 13. feb. 2020 kl. 11.11 skrev A  > <mailto:anneeyr...@gmail.com>
> >  > <mailto:anneeyr...@gmail.com <mailto:anneeyr...@gmail.com>>>:
> >  >
> >  > How to set the screensaver to either show keyboard language
> > or not
> >  > to lock screen as default ?
> >  >
> >  > I have tried to set it to not lock the screen by uncheck it
> > in the
> >  > Screensaver settings. But it still continues to lock the
> screen.
> >  >
> >  > --
> >  > You received this message because you are subscribed to a
> > topic in
> >  > the Google Groups "qubes-users" group.
> >  > To unsubscribe from this topic, visit
> >  >
> >
> https://groups.google.com/d/topic/qubes-users/uMl6_djER5E/unsubscribe.
> >  > To unsubscribe from this group and all its topics, send an
> > email to
> >  > qubes-users+unsubscr...@googlegroups.com
> > <mailto:qubes-users%2bunsubscr...@googlegroups.com>
> >  > <mailto:qubes-users%2bunsubscr...@googlegroups.com
> > <mailto:qubes-users%252bunsubscr...@googlegroups.com>>.
> >  > To view this discussion on the web visit
> >  >
> >
> https://groups.google.com/d/msgid/qubes-users/4ba32760-f4ea-4f1f-b92f-588306d2fa5d%40googlegroups.com
> .
> >  >
> >  >
> >  > Every time the screensaver lock the screen, I need to
> > reset/restart the
> >  > pc as I can’t know which keyboard layout is used and that is just
> a
> >  > little bit annoying ! 😕
> >  >
> >  > So I hope someone can explain to me how I can get it to show the
> >  > keyboard layout or not locking the screen.
> >  >
> >  > If that isn’t possible, can I then somehow disable or uninstall
> the
> >  > screensaver ?
> >  >
> >
> > In screensaver preferences, set "Lock screen after" to 0 minutes.
> >
> >
> > You’re right, I forgot once again that Linux/Qubes OS consist of small
> > programs that is made by different other creators.
> >
> > Setting “lock screen after” 0 minutes just makes the screensaver to lock
> > immediately when the screensaver gets activated.
> >
> > I have wrote to the creator of the screensaver, and he says X11 sucks
> > and makes it impossible to get the keyboard layout showed.
> >
> > So I have to disable the lock.
> >
> > One option is to set the lockTimeout to a large number so that it won’t
> > lock. lockTimeout control have long after a blank screen the lock will
> > be activated.
> >
> > Another solution is to disable or uninstall the program.
> >
>
> Ah, you are right about the "lock after" option.
>
> I've just checked my system, and in the screensaver preferences window,
> the Mode can be set to Disable Screen Saver.  I think that is what you
> need to do.
>
> Mike.
>

Yes, that’s right.

I forgot to write that I also have tried that, and that didn’t work either.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUFvq6%3D%3DoknA5s1PezDQv-fiepUWHW21rnFByXKO4yo%2Bdw%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tor. 13. feb. 2020 kl. 22.38 skrev :

> On Thu, Feb 13, 2020 at 10:33:45PM +0100, A E wrote:
>
> > When I try to use “*” around the domaine name, it says there doesn’t
> exist
> > any domain with that name. And I have checked it was spelled correctly.
> And
> > I get the same result if I use the root account.
>
> try using quotes ... as in regular "" instead of “” ...
> i am pretty sure the shell doesnt understand weird graphical
> unicode stuff like that.
>
> I have I’m just writing these messages on an iPad which seems only to be
able to write these “”.

I have also tried to use a UK keyboard layout in the terminal to be certain
with the same result.

It just keeps saying either nothing or “qvm-run: error: no such domain:
‘*work*’ ” And when it says nothing, I can’t see any new domain in the
Domain manager.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUExmCC0w23uRB17Xa_mVTUj8rGGE-ghQw1NUg%3DWE27%3D%3Dg%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tor. 13. feb. 2020 kl. 22.33 skrev A E :

> tor. 13. feb. 2020 kl. 17.59 skrev M E :
>
>> tor. 13. feb. 2020 kl. 17.12 skrev unman :
>>
>>> On Thu, Feb 13, 2020 at 04:48:42PM +0100, M E wrote:
>>> > tor. 13. feb. 2020 kl. 13.54 skrev M E :
>>> >
>>> >
>>> > I have tried using the unsafe browser (as this domain also offer a file
>>> > manager as a shortcut) and safe the file in the domains download
>>> folder.
>>> > Here the file is suggested to be saved as ???install.sh???.
>>> >
>>> > And then I tried to execute the following script in dom0:
>>> >
>>> > qvm-run -p --filter-escape-chars --no-color-output
>>> >  "cat '/home/user/Downloads/install.sh'" >
>>> > install.sh
>>> >
>>> > But as expected, this part of the script has to be replaced by
>>> something
>>> > else:
>>> >
>>> > 
>>> >
>>> > I guess with something like a partition letter, but as I don???t know
>>> more
>>> > than this path; ???'/home/user/Downloads/install.sh'??? I need to be
>>> told what
>>> > I should write here instead.
>>> >
>>> > So what shall I replace it with ?
>>> >
>>>
>>> That's the *name* of the qube where the script is located.
>>>
>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "qubes-users" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> qubes-users+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/qubes-users/20200213161211.GA29023%40thirdeyesecurity.org
>>> .
>>>
>>
>> Thank you.
>>
>> I have tried to execute it in the user dom0, both:
>>
>> qvm-run -p --filter-escape-chars --no-color-output untrusted "cat
>> '/home/user/Downloads/install.sh'" > install.sh
>>
>> and
>>
>> qvm-run -p --filter-escape-chars --no-color-output “untrusted” "cat
>> '/home/user/Downloads/install.sh'" > install.sh
>>
>> It doesn’t seem to do anything...
>>
>> Shall I run it with root access instead, or what shall I do ?
>>
>
> When I try to use “*” around the domaine name, it says there doesn’t exist
> any domain with that name. And I have checked it was spelled correctly. And
> I get the same result if I use the root account.
>
> So I still need help to get further.
>

I have also tried using the work domain instead. But with the same result.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUEpDjtPu2jDmQ0QPNOPLZtCpjTvTUpsA8q%3D%3DdoRA_4QSQ%40mail.gmail.com.

Re: [qubes-users] How to setup Win10 HVM ?

[A E]

tor. 13. feb. 2020 kl. 17.59 skrev M E :

> tor. 13. feb. 2020 kl. 17.12 skrev unman :
>
>> On Thu, Feb 13, 2020 at 04:48:42PM +0100, M E wrote:
>> > tor. 13. feb. 2020 kl. 13.54 skrev M E :
>> >
>> >
>> > I have tried using the unsafe browser (as this domain also offer a file
>> > manager as a shortcut) and safe the file in the domains download folder.
>> > Here the file is suggested to be saved as ???install.sh???.
>> >
>> > And then I tried to execute the following script in dom0:
>> >
>> > qvm-run -p --filter-escape-chars --no-color-output
>> >  "cat '/home/user/Downloads/install.sh'" >
>> > install.sh
>> >
>> > But as expected, this part of the script has to be replaced by something
>> > else:
>> >
>> > 
>> >
>> > I guess with something like a partition letter, but as I don???t know
>> more
>> > than this path; ???'/home/user/Downloads/install.sh'??? I need to be
>> told what
>> > I should write here instead.
>> >
>> > So what shall I replace it with ?
>> >
>>
>> That's the *name* of the qube where the script is located.
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "qubes-users" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/qubes-users/78DgmWxZf80/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> qubes-users+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/qubes-users/20200213161211.GA29023%40thirdeyesecurity.org
>> .
>>
>
> Thank you.
>
> I have tried to execute it in the user dom0, both:
>
> qvm-run -p --filter-escape-chars --no-color-output untrusted "cat
> '/home/user/Downloads/install.sh'" > install.sh
>
> and
>
> qvm-run -p --filter-escape-chars --no-color-output “untrusted” "cat
> '/home/user/Downloads/install.sh'" > install.sh
>
> It doesn’t seem to do anything...
>
> Shall I run it with root access instead, or what shall I do ?
>

When I try to use “*” around the domaine name, it says there doesn’t exist
any domain with that name. And I have checked it was spelled correctly. And
I get the same result if I use the root account.

So I still need help to get further.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUFaVFaTjXYXBXV_h_JJ0x2TrwVOrVn%2BEUKp5anobcQ%3DJQ%40mail.gmail.com.

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

[A E]

tor. 13. feb. 2020 kl. 11.11 skrev A :

> How to set the screensaver to either show keyboard language or not to lock
> screen as default ?
>
> I have tried to set it to not lock the screen by uncheck it in the
> Screensaver settings. But it still continues to lock the screen.
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "qubes-users" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/qubes-users/uMl6_djER5E/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> qubes-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/qubes-users/4ba32760-f4ea-4f1f-b92f-588306d2fa5d%40googlegroups.com
> .
>

Every time the screensaver lock the screen, I need to reset/restart the pc
as I can’t know which keyboard layout is used and that is just a little bit
annoying ! 😕

So I hope someone can explain to me how I can get it to show the keyboard
layout or not locking the screen.

If that isn’t possible, can I then somehow disable or uninstall the
screensaver ?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CABRRaUGQSEHtrpfb1ouJiU8HHaqm3TVsQ6_4rdNsofrNv6A%3DFw%40mail.gmail.com.

[qubes-users] Qubes won't boot after installation

[a . e . andreou]

I have a Dell Precision 5530 with an i7-8850 and NVidia Quadro P2000. The hard 
drive is a Class 40 M.2.

My issue is that after installing Qubes OS on my laptop the OS does not appear 
when booting. The message I get is "No bootable devices found".

I have tried both the automatic formatting of the drive as well as several 
custom configurations.

There is no other OS on the hard drive.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e1ea6724-f77e-41b6-b9ab-b949c52b66f3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.