[qubes-users] Re: Installation on NUC6i7KYK
Actually I was able to get it to work. After many failed attempts I did use UEFI mode to do installation and then I did do those instructions for "no bootable device" you show. I didn't try babels instructions. After I did that it booted right up. And it's been working ok even after an update to dom0, even though it said after kernel updates you have to do it again. I was noticing a weird issue where a browser in a given domain would freeze and I have to open another browser session to unfreeze it. But one thing I did notice: i tried using the minidisplayport connector instead of hdmi and it would not boot. If I switched back to hdmi it was fine. So I think one Bkm is to use HDMI ONLY for qubes. -m -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/228d06a5-80db-4e71-9508-8870cb41ea06%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Installation on NUC6i7KYK
Did you ultimately succeed? I have also have an Intel NUC 6i7KYK and have gotten Qubes 3.2 installed on the M2 SSD. However, it won't boot. I'm going to try the helpful instructions from babel, but there are some questions. Here are the files on the USB install drive: -rwxr-xr-x 1 982K Dec 10 2015 BOOTX64.efi drwxr-xr-x 2 2.0K Sep 20 2016 fonts -rw-r--r-- 1 1.1K Sep 20 2016 grub.cfg -rw--- 1 22M Sep 20 2016 initrd.img -r--r--r-- 1 1.6K Sep 20 2016 TRANS.TBL -rw-r--r-- 1 5.7M Jul 18 2016 vmlinuz -rw-r--r-- 1 586 Sep 20 2016 xen.cfg -rw-r--r-- 1 2.1M Jul 26 2016 xen.efi The instructions under Boot Device Not Recognized After Installing say: Copy /boot/efi/EFI/qubes/ to /boot/efi/EFI/BOOT/. Rename /boot/efi/EFI/BOOT/xen.efi to /boot/efi/EFI/BOOT/BOOTX64.efi. Rename /boot/efi/EFI/BOOT/xen.cfg to /boot/efi/EFI/BOOT/BOOTX64.cfg. However, 1. There is no qubes directory 2. Do they really mean to *overwrite* the BOOTX64.efi file? I'm guessing these instructions might have been meant for a previous version of Qubes. Anyway, I can go ahead and try it. I was just curious how it went for you. Also, I'm slightly concerned about driver support for the various NUC capabilities. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/96957cbc-531a-47fc-b5dc-df6bde623a55%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Installation on NUC6i7KYK
On Monday, April 17, 2017 at 10:08:21 PM UTC+2, Ely105 wrote: > On Monday, April 17, 2017 at 12:38:26 PM UTC-7, Ely105 wrote: > > I tried searching on this platform and qubes and haven't found anyone yet > > who has posted anything so here goes. I tried to install 3.2 on the Intel > > Skull Canyon Skylake NUC with Iris Pro Gfx. Tried UEFI mode and it seems > > to install fine but when I reboot it says "No bootable.." on startup. If I > > try to install in Legacy Mode it seems unable to start graphical installer > > and goes into a text-only mode. So finally I took a working install from a > > small/regular NUC that has been working fine, and when it boots it seems to > > go into text mode as well. I'm guessing maybe a gfx driver issue, but not > > sure if there is an easy way to update/fix. Any ideas? > > > > Thanks, > > Mark > > Sorry, I didn't make it clear that I moved an SSD from a working NUC to the > NUC6i7KYK and it started bootup but it seemed to fail on loading x11/gui. So > it seems like a gfx driver issue. No, I've got a kaby lake i3 so nuc7i3bnh... Using a m.2 I was running into issues on a new install. Wouldn't start boot-up, so I stuck an ssd with qubes in on it and that would boot up half-way. That's when i went to and did the uefi instructions. I'm still new, so definitely could be a driver issue. And on that note, if you've got a similar bios and ever figure out what the best options for the graphics aperature options are, it would save me a headache. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/853f94b9-1c01-4139-85b7-e9e614ef6c81%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Installation on NUC6i7KYK
On Monday, April 17, 2017 at 12:38:26 PM UTC-7, Ely105 wrote: > I tried searching on this platform and qubes and haven't found anyone yet who > has posted anything so here goes. I tried to install 3.2 on the Intel Skull > Canyon Skylake NUC with Iris Pro Gfx. Tried UEFI mode and it seems to > install fine but when I reboot it says "No bootable.." on startup. If I try > to install in Legacy Mode it seems unable to start graphical installer and > goes into a text-only mode. So finally I took a working install from a > small/regular NUC that has been working fine, and when it boots it seems to > go into text mode as well. I'm guessing maybe a gfx driver issue, but not > sure if there is an easy way to update/fix. Any ideas? > > Thanks, > Mark Sorry, I didn't make it clear that I moved an SSD from a working NUC to the NUC6i7KYK and it started bootup but it seemed to fail on loading x11/gui. So it seems like a gfx driver issue. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/32483177-56c5-42b4-83f1-a93a63e228cd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Installation on NUC6i7KYK
On Monday, April 17, 2017 at 12:53:36 PM UTC-7, babel wrote: > On Monday, April 17, 2017 at 9:38:26 PM UTC+2, Mark Elston wrote: > > I tried searching on this platform and qubes and haven't found anyone yet > > who has posted anything so here goes. I tried to install 3.2 on the Intel > > Skull Canyon Skylake NUC with Iris Pro Gfx. Tried UEFI mode and it seems > > to install fine but when I reboot it says "No bootable.." on startup. If I > > try to install in Legacy Mode it seems unable to start graphical installer > > and goes into a text-only mode. So finally I took a working install from a > > small/regular NUC that has been working fine, and when it boots it seems to > > go into text mode as well. I'm guessing maybe a gfx driver issue, but not > > sure if there is an easy way to update/fix. Any ideas? > > > > Thanks, > > Mark > > > You are following the guide written at the Qubes website here... > https://www.qubes-os.org/doc/uefi-troubleshooting/ > Which is not very easy to follow.. > > Your problem is either the first or the third (I did not really understand > which mine was either, so I followed both). > > 1) reinstall qubes, and at the end of the install, follow # 4, 5, 11, 12, > etc. on the first "problem". > > 2) On reboot, boot into a live cd of some sort (anything where you can get a > terminal, I used Ubuntu because it's easy on the eyes). You are now trying > to fix the third problem on the "troubleshooting" page. > When I tried to copy the /boot/efi/EFI..., I got an fstab error. Because the > drive isn't mounted. I ran.. > "" > sudo umount /dev/YourQubesDrive > mkdir /tmp/MyDrive > sudo mount -o rw /dev/YourQubesDrive /tmp/MyDrive > """ > where YourQubesDrive is the drive you have just installed qubes on. I used > gparted to make sure that it was the right one, but you can look where you're > installing qubes as you're installing it or there is probably some linux > command to do so. > I got that info from.. > https://askubuntu.com/questions/794468/mount-cant-find-dev-sdb1-in-etc-fstab-or-etc-mtab > > Then you can copy the stuff over from within the folder you made. reboot > after. > cd /tmp/MyDrive Thanks babel. Is your NUC a Skull Canyon NUC? I have it running on regular NUC, but seeing different problems on Skull Canyon. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/ce0f8cc3-2329-4d3c-9d55-95eb3fa46fa3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Installation on NUC6i7KYK
On Monday, April 17, 2017 at 9:53:36 PM UTC+2, babel wrote: > On Monday, April 17, 2017 at 9:38:26 PM UTC+2, Mark Elston wrote: > > I tried searching on this platform and qubes and haven't found anyone yet > > who has posted anything so here goes. I tried to install 3.2 on the Intel > > Skull Canyon Skylake NUC with Iris Pro Gfx. Tried UEFI mode and it seems > > to install fine but when I reboot it says "No bootable.." on startup. If I > > try to install in Legacy Mode it seems unable to start graphical installer > > and goes into a text-only mode. So finally I took a working install from a > > small/regular NUC that has been working fine, and when it boots it seems to > > go into text mode as well. I'm guessing maybe a gfx driver issue, but not > > sure if there is an easy way to update/fix. Any ideas? > > > > Thanks, > > Mark > > > You are following the guide written at the Qubes website here... > https://www.qubes-os.org/doc/uefi-troubleshooting/ > Which is not very easy to follow.. > > Your problem is either the first or the third (I did not really understand > which mine was either, so I followed both). > > 1) reinstall qubes, and at the end of the install, follow # 4, 5, 11, 12, > etc. on the first "problem". > > 2) On reboot, boot into a live cd of some sort (anything where you can get a > terminal, I used Ubuntu because it's easy on the eyes). You are now trying > to fix the third problem on the "troubleshooting" page. > When I tried to copy the /boot/efi/EFI..., I got an fstab error. Because the > drive isn't mounted. I ran.. > "" > sudo umount /dev/YourQubesDrive > mkdir /tmp/MyDrive > sudo mount -o rw /dev/YourQubesDrive /tmp/MyDrive > """ > where YourQubesDrive is the drive you have just installed qubes on. I used > gparted to make sure that it was the right one, but you can look where you're > installing qubes as you're installing it or there is probably some linux > command to do so. > I got that info from.. > https://askubuntu.com/questions/794468/mount-cant-find-dev-sdb1-in-etc-fstab-or-etc-mtab > > Then you can copy the stuff over from within the folder you made. reboot > after. > cd /tmp/MyDrive And I realized you can just do the second step while you're doing the first one.. Hey, it's a learning process. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b3406ac4-f86c-4dff-9baa-28799448973f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
