SD PArts for sale
I have an 85 Daytona TurboZ I'm parting out any reasonable offers will not be refused. Larger pieces such as Block or Pizza wheels would be beyond expensive to ship so if anyone is interested in then I'd say it would probably be best if you were close and could pull them yourself. The township where i live and the landlord are harping on me to get the car out of here, so if there is anything anyone thinks they might need or be interested in let me know before i have to have her towed out of here. The car is a stock Turbo1 the head is gone already as well as the instrument cluster and voice module. but all other parts remain. Larry Taylor Poynette, WI contact me at [EMAIL PROTECTED] _ ___ Need a vacation? Get great deals to amazing places on Yahoo! Travel. http://travel.yahoo.com/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
I have the following parts for sale I will be at carlisle on sat and sunday and at sdac car show on sunday. shadow sunroof and sunroof bag 1 charger sunroof bag charger glhs license plate bracket front 87 glhs nose and side skirts complete 87 glhs shelby steering wheel perfect condition glhs dash plaque #782 omni chrome 4 door ventvisors 1 88 daytona radiator intercooler cleaned and pressure checked 89 daytona non digital dash 89k 87 t2 forged crank 89 t2 commonblock bottom end forged crank heavy rods etc axles for an omni with a 555 or 520 newer cable shifter and cables daytona t top bags 3 1 set of 4 14 wheels misc shadow plastic pieces interior mostly grey 88 shadow full bra brand new in box shadow woodgrain trim center piece and ashtray all parts located near wilkes barre pa can deliver to above events if arrangements are made best offer thanks in advance jamie/HTML ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
T-Bird turbo coupe intercooler $50 I paid $113 for this part. This type of intercooler can be retrofitted to 2.2 and 2.5 Mopars. Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 85 GLHT airbox bracket $5 used clutch and pressure plate from 1985 GLHT not bad $25 Pizza wheel 15X6 $20 1985 T-1 log intake $15 This has some of the sensors included. 1985 turbo exhaust manifold $20 Try your own homemade porting. The most you can lose is $20. Mopar coolant upper line for 1989 2.5 mitsu (brand new) $40 I paid $50.50 for this part. Timing light Sunpro (paid $32) $25 like new cylinder head from 1988 T-1 $75 with roller cam Boost gauge $18 High flow cat 2.5 inch in and out from Don's speed shop $45 Assorted wheel center caps. Used ones and newer ones I bought for 15 pizza wheels. Fits crabs and others. Asking $5 each for used ones and $8 ea. for the nice ones. Buyer pays shipping Located in Connecticut ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for Sale
I have a couple of parts that I need to get rid of, since I am trying to clean out the garage. 1. Turbo 2 style throttle body. Supposedly stock off a GLHS, but not sure. Very clean, looks like new. Its exactly like the one on my 87 Shelby Lancer. $40 2. Turbo 1 log intake off an 85 Shelby Charger. Brand new MP 803 Injectors and Standard FPR (only about 200 miles on both - the car sits most of the time). Comes with harness and all sensors. All sensors worked when it was pulled before T2 conversion. I would like to get $140 to partially cover the new parts, but I will consider offers. I can take pics of all these if needed. Just ask if you have any questions. I will probably find more stuff to sell later today. Thanks. Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
T-Bird turbo coupe intercooler $40 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone bobble strut $4 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $20 85 GLHT airbox bracket $5 Pizza wheel 15X6 $20 1985 T-1 log intake $10 1985 turbo exhaust manifold $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $40 Timing light Sunpro (paid $32) $20 like new cylinder head from 1988 T-1 $70 with roller cam Buyer pays shipping Located in Connecticut ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts for Sale
I just found my other stock SRT-4 Intercooler that I was planning to use in my Lancer, but have decided against it. It is brand new in the box. First $125 takes it. All of these prices are plus shipping. Mike Fisher wrote: I have a couple of parts that I need to get rid of, since I am trying to clean out the garage. 1. Turbo 2 style throttle body. Supposedly stock off a GLHS, but not sure. Very clean, looks like new. Its exactly like the one on my 87 Shelby Lancer. $40 2. Turbo 1 log intake off an 85 Shelby Charger. Brand new MP 803 Injectors and Standard FPR (only about 200 miles on both - the car sits most of the time). Comes with harness and all sensors. All sensors worked when it was pulled before T2 conversion. I would like to get $140 to partially cover the new parts, but I will consider offers. I can take pics of all these if needed. Just ask if you have any questions. I will probably find more stuff to sell later today. Thanks. Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for Sale
I am cleaning out my parents garage of all my car related items... The stuff is located in York, PA 17404. All prices are negotiable. Everything that isn't sold goes for scrap 2.2 Turbo I Engine. Running condition no knocks. Was pulled out of a 1988 Dodge Lancer. I upgraded the car to a Turbo II when the turbo on this car started to smoke. This engine is complete from oil pan to valve cover. I pitched the turbo, so it won't be included. $100.00 2.2 Turbo II Engine. Started to knock (I stopped driving immediately) and pulled it out before anything got too destroyed. The head is off of it currently. But neither the block or head have been stripped any further. Comes with head, and box of parts. $50.00 2.2 / 2.5 Common blocks. Bare. I have 2 of them and at least one is in great (runnable) shape, the other will need machine work. $30.00 each 1986 Daytona bucket seats. Black cloth. Great Shape. I may even have the back seat as well. $50.00 takes whatever I have. I have a couple bins of assorted accessories and brackets that can go with whoever takes my other stuff if they are wanted. I also have a tall-deck chevy big block fully machined and ready to go. As well as a complete and running sbc 283 v8. Brian [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: This email may contain confidential health information that is legally privileged. This information is intended for the use of the named recipient(s). The authorized recipient of this information is prohibited from disclosing this information to any party unless required to do so by law or regulation and is required to destroy the information after its stated need has been fulfilled. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of this email is strictly prohibited. If you receive this e-mail message in error, please notify the sender immediately to arrange disposition of the information. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
I am trying to clean up my garage. Lots of stuff needs to find a new home GLH ground effects $150 SMECs, T3 SBECs Minivan turbo engine harness $25 minivan front fenders, hood, grille, headlamp supports and bezels offer GLHS radiator intercooler $150 needs a recore complete 3 mandrel bent Omni exhaust system $125 pick up only Make offers on the rest no wiper GLH rear hatch Omni front fenders Omni rear doors Blue Omni cargo cover Red Omni cargo cover AC compressors Starters 85 distributor 86 later turbo distributor good swirl head All are in Charlotte NC. Richard Paul ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts for Sale
I posted about an hour ago on td.com to see if the pumper caps are still available. If they are, mark them sold (all 5). Barry Pumpers Caps; 1. Dodge, 10.00 each, 5 total. Rodney The Rebirth of MUTT Next-gen email? Have it all with the all-new Yahoo! Mail Beta. -- ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts for Sale, White R/T Molding
Rodney and everyone, I could use the white Spirit R/T side molding that is shown bleeding in this picture. I need the driver's side front fender and rear door molding. http://pg.photos.yahoo.com/ph/andy_posluszny/detail?.dir=898are2.dnm=c0d 9.jpg.src=ph Andy In Friendswood == -Original Message- From: Rodney Enis [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sun, 13 Aug 2006 16:26:41 -0700 (PDT) Subject: SD Parts for Sale snip RT Parts; 1. Rear wing (red) from RT Spirit, 45.00 2. Side molding, DOHC, 20.00 snip Rodney ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for Sale
The car is a black with grey leather interior, pics available, 89 Tona that i'm parting out, plus some SL and RT Items. All items do not include shipping. No paypal account so postal money order only. Tona Parts; 1. Everything, except the engine/tranny/brakes/suspension. 2. 3- cargo covers total, 2/w Daytona 25.00, 1-w/o logo 15.00 3. 2-1990 side view mirrors 35.00 4. Sunroof 40.00 5. Armrest cover 20.00 6. Rear louver 45.00 7. FWD Stage 3 computer, 185.00. SL parts; 1. 4- center caps, 100 (for all 4) Some tabs missing. 2. Stock computer, 50.00 3. 1- Stock Wheel, 60.00 RT Parts; 1. Rear wing (red) from RT Spirit, 45.00 2. Side molding, DOHC, 20.00 Pumpers Caps; 1. Dodge, 10.00 each, 5 total. 2. SC, 15.00 each, 3 total. Rodney The Rebirth of MUTT Next-gen email? Have it all with the all-new Yahoo! Mail Beta. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $75 T-Bird turbo coupe intercooler $50 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone bobble strut $5 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $15 85 GLHT door handle $7 85 GLHT airbox bracket $7 1985 T-1 log intake $10 1985 turbo exhaust manifold $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 New trans filter kit for A-413 turbo auto trans.$5 1988 Turbo 1 cyl. head $75 Sunpro Timing Light $16 2.2 speed secrets book $14 1989 Haynes Repair manual for Spirit/Acclaim $8 Buyer pays shipping ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
I want to stop hoarding Omni parts! 1985 t1 engine, near complete, and was running fine. It was removed, and replaced with my 2.5 race engine. 1986 t1 engine, not as complete, but was also running fine before it was removed. 4 pizza wheels, not bad shape 2 Pirelli 210 snow tires, mounted on 5 bolt pizza's many interior pieces, grey mostly, but some red, some blue GLHT springs, front and rear Radio/cassette's gauge cluster MP logic module #P4532327 cyl heads, condition unknown manifolds, throttle bodies 1 set of glht side skirts glass pop up style mirrored sunroof removed from an Omni Much more stuff! I would rather not ship anything, so local pickup is preferred. All, or any offers considered, because I'm moving soon, and I will be throwing stuff away if it doesn't find a good home. Dave Krulitsky Surrey, B.C. Canada ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
Sorry I gave the wrong info, to locate the parts on eBay. Under advance search chose from specific seller - thunder-nation. Thanks RAY ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $125 T-Bird turbo coupe intercooler $65 15 GLH 5 lug Pizza wheels 6 wide E-mail for pictures non a/c alt. bracket$20 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone bobble strut $7 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $15 85 GLHT door handle $7 85 GLHT airbox bracket $7 85 Omni glovebox insert $3 1985 T-1 log intake $10 1985 turbo exhaust manifold $15 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$7 Engine Stand (brand new) HD $40 Hundreds of old car magazines ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $125 T-Bird turbo coupe intercooler $65 Very good maroon/red driver's seat for 4-door Omni(with tracks)$45 Very good two part maroon rear seat for 4-door Omni $45 Very good complete carpet for Omni/Horizon. $40 Above 3 items came from mint 24,000 mile 1987 Omni. 15 GLH 5 lug Pizza wheels 6 wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone bobble strut $7 85 GLH pass rear door inside panel red, very good cond.$7 85 GLH driver's side mirror $25 with remote cable, bezel 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $12 85 Omni glovebox insert $4 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$9 Engine Stand (brand new) HD $40 Hundreds of old car magazines ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
OK GUYS, This is the last chance to get a smokin deal on this stuff before it goes on E-Bay. www.marcmedina.com/parts.html First come, first serve - money talks, and you know the rest... Thanks, Marc Medina www.marcmedina.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra T-Bird turbo coupe intercooler $75 Very good maroon/red driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH 5 lug Pizza wheels 6 wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut $10 85 GLH pass rear door inside panel red, very good cond.$7 85 GLH driver's side mirror $25 with remote cable, bezel 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$9 Engine Stand (brand new) HD $40 Hundreds of old car magazines, with tests on TDs. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
OK, so I went to the junkyard today because they're advertising that they're crushing Chrysler products this coming week. I've rescued the following parts: 3 non A/C alternator brackets - $25 each - shipped cast TBI valve cover (cover only - no filler cap) - $20 shipped set of Shelby center caps for the 15 or 16 pumpers - $45 shipped First come, first serve, let me know by e-mail or call me at 707-478-5669. Pics available if needed. PLEASE NOTE: I am leaving for work and will be gone till 10PM West Coast Time, so call me if you're really hot and bothered for a part. Thanks, Marc Medina www.marcmedina.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra T-Bird turbo coupe intercooler $75 Very good maroon driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH 5 lug Pizza wheels 6 wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 T-Bird turbo coupe intercooler $75 Very good maroon driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH 5 lug Pizza wheels 6 wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 T-Bird turbo coupe intercooler $75 Very good maroon driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH 5 lug Pizza wheels 6 wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for Sale
I have a few items for a Shelby Charger/GLHS I have listed on Ebay. Some people have said these are parts they were looking for, so here they are. http://motors.search.ebay.com/_W0QQsassZfish - Get your basically free Xbox 360 right here!! http://xbox360s.freepay.com/?r=25388067 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts For Sale
Also if it has a Mitsu turbo, It was most likely a T1. I don't think any factory intercooled cars came with one. (But after 20 years, who knows what is original) - Original Message - From: [EMAIL PROTECTED] To: shelby-dodge@imagicomm.com Sent: Tuesday, January 31, 2006 2:35 AM Subject: Re: SD Parts For Sale Roy, that is insorrect. Fuel pump block off's are on all 88 / older blocks, 89 up do not have them. An 88 C/S Daytona would not have came from the factory with an intercooler. Someone has added it. The factory motor would have been a T-I, but it is possible that if someone added an intercooler, it could have had an entire t-II engine and everything installed. Also, are you sure its really a C/S? I have seen Shelby Z's that someone has added C/S emblems to the fender. Look at the VIN. If its got an A in the 8th didgit, its a factory T-II car. If its an 88, it would have to be a shelby Z. 10th VIN digit should be J for 88. if its a C/S it will have an AGB on the fender tag. An 88 C/S would have the 8th digit of the VIN an E (2.2 T-I), 10th J. 89 C/S's were available with T-II's, on the AGS package. If thats what it is, it will have AGS on the fender tag, an A in the 8th VIN spot, and a K in the 10th. TO tell if thats a T-I or T-II, There's really no way to tell on the outside. Black valve cover and T-II turbo can be added to a T-I, so that is no real way to tell for sure. Same block and head. Without taking them apart its hard to say for sure. If its got a grey valve cover and intake, on an 88 C/S, I would bet its a T-I like it should be, but with an intercooler added. Joey Dalton Hillbilly Racing If anyone can tell me what to look for to see if it's TII could you please let me know. if it has a fuel pump block off plate in the front of the engine (between the oil filter and water pump housing, in that general area) its a turbo 1. if not its a turbo 2. To the best of my knowledge. Thanks, Roy 86 GLHS #200 87 Shelby Lancer #781 5sp cloth 81 Fiat X1/9 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts For Sale
Hi all, got some stuff for sale I got a daytona sub frame, complete still has the struts and a brake assembly's, A520 Tranny 3.55 final drive 55K 2.2 Engine, came out of a 88 Daytona C/S 55K turbo is bad, motor is complete, no AC I'm not sure if it's a TII, it had a factory intercooler If anyone can tell me what to look for to see if it's TII could you please let me know. I just need to clean out my garage, shoot me a price on anything. I don't need a million dollars out of anything. I know shippingis a factor so I'm not picky on what it will go for. Jeff ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts For Sale
In a message dated 1/30/06 8:27:55 AM Pacific Standard Time, [EMAIL PROTECTED] writes: If anyone can tell me what to look for to see if it's TII could you please let me know. if it has a fuel pump block off plate in the front of the engine (between the oil filter and water pump housing, in that general area) its a turbo 1. if not its a turbo 2. To the best of my knowledge. Thanks, Roy 86 GLHS #200 87 Shelby Lancer #781 5sp cloth 81 Fiat X1/9 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts For Sale
In a message dated 1/30/06 8:27:55 AM Pacific Standard Time, [EMAIL PROTECTED] writes: If anyone can tell me what to look for to see if it's TII could you please let me know. if it has a fuel pump block off plate in the front of the engine (between the oil filter and water pump housing, in that general area) its a turbo 1. if not its a turbo 2. To the best of my knowledge. Thanks, Roy 86 GLHS #200 87 Shelby Lancer #781 5sp cloth 81 Fiat X1/9 The fuel pump block off plate tis the handiest way to tell an older block from a common block, but is not an accurate way to tell if a T2. For example, the 1987 T2's (in the Daytonas) had the two piece intake and the older block with the fuel pump block off plate. If the car is a stocker, and it is/was intercooled from the factory, it is a T2. Barry Shelby Dodge Auto Club - Visit our website at http://www.sdac.org Special Membership offer for new or renewing members, join SDAC or renew your existing membership by Feb 11 and get a Bonus 6 months extra for every year of dues!! ___ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts For Sale
Roy, that is insorrect. Fuel pump block off's are on all 88 / older blocks, 89 up do not have them. An 88 C/S Daytona would not have came from the factory with an intercooler. Someone has added it. The factory motor would have been a T-I, but it is possible that if someone added an intercooler, it could have had an entire t-II engine and everything installed. Also, are you sure its really a C/S? I have seen Shelby Z's that someone has added C/S emblems to the fender. Look at the VIN. If its got an A in the 8th didgit, its a factory T-II car. If its an 88, it would have to be a shelby Z. 10th VIN digit should be J for 88. if its a C/S it will have an AGB on the fender tag. An 88 C/S would have the 8th digit of the VIN an E (2.2 T-I), 10th J. 89 C/S's were available with T-II's, on the AGS package. If thats what it is, it will have AGS on the fender tag, an A in the 8th VIN spot, and a K in the 10th. TO tell if thats a T-I or T-II, There's really no way to tell on the outside. Black valve cover and T-II turbo can be added to a T-I, so that is no real way to tell for sure. Same block and head. Without taking them apart its hard to say for sure. If its got a grey valve cover and intake, on an 88 C/S, I would bet its a T-I like it should be, but with an intercooler added. Joey Dalton Hillbilly Racing If anyone can tell me what to look for to see if it's TII could you please let me know. if it has a fuel pump block off plate in the front of the engine (between the oil filter and water pump housing, in that general area) its a turbo 1. if not its a turbo 2. To the best of my knowledge. Thanks, Roy 86 GLHS #200 87 Shelby Lancer #781 5sp cloth 81 Fiat X1/9 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Parts For Sale
Might be interested in the motor, if you are close enough for me to pick it up. Where do you live? Joey Dalton Hillbilly Racing Hi all, got some stuff for sale I got a daytona sub frame, complete still has the struts and a brake assembly's, A520 Tranny 3.55 final drive 55K 2.2 Engine, came out of a 88 Daytona C/S 55K turbo is bad, motor is complete, no AC I'm not sure if it's a TII, it had a factory intercooler If anyone can tell me what to look for to see if it's TII could you please let me know. I just need to clean out my garage, shoot me a price on anything. I don't need a million dollars out of anything. I know shippingis a factor so I'm not picky on what it will go for. Jeff ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH Pizza wheels 6 wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH Pizza wheels 6 wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
http://www.marcmedina.com/parts.html Also updated the site quite a bit. Happy New Year! Thank You, Marc Medina www.marcmedina.com http://www.marcmedina.com/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts For Sale!
I have a motor out of an 88 Daytona C/S. I believe it's a TII, but not entirely sure. I dropped the entire motor and trans and sub-frame assembly. It's taking up too much space and I need to get rid of it. I have have no problem disassembling the engine and tranny from the sub-frame. The tranny is an A-523. The car when I got it had only 55K on it. If anyone is interested in any parts let me. If you want any pictures, be it of the engine/transmission, feel free to ask I'll take some. Jeff ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15 GLH Pizza wheels 6 wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15 GLH Pizza wheels 6 wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for Sale; 89 lebaron conv.
auto t1,power everything has everything except the head, block, fuel pump, chrome grill, top motor, r. fender. almost everything is in moderate to good condition. car has 180k on it, but as far as i can tell its been decently taken care of, no body damage cept for the typical paint fade, all the wiring looks clean, no cracks, same with the vacuum lines. i will sell anything off this car for a fair price, most of the cost will come from labor and shipping if needed. just offer a fair price and i will probably take it email me privately, and i will respond asap, but i have a job so it could take me a couple of days. located in spokane, wa J. CSX-T #901 (gettin more speed) 89' 2.5 T1, T2 intake, volvo I/C, talon bov, 3 side exit exhaust, A-523, gus valve(manual booste controller), and more SONICS ROCK __ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
located in ne pa 90 vnt complete engine / no turbo everything else is there parting 88 sundance 4 door 5 speed blue/striped interior 87 T2 forged crank 88 a520 turbo flywheel shadow es turbo hood 89 and up white duster hatch green w gold lettering 2 shadow drivers side fenders many other shadow / sundance parts email with needs questions make offer jamie [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15 GLH Pizza wheels 6 wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 85 GLHT airbox bracket $15 85 Omni glovebox insert$5 1985 GLHT trans shift rod (new) $35 this is the rod on the trans itself New shift rod retainer clips for 525 trans. 3 of them$15 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$45 34 lbs/hr set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 1989 Daytona driver's manual $10 Hardcover book by Bob Tasca You will be satisfied owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts For Sale-Can deliver to Chicago 25-30 July
http://home.earthlink.net/~turbododge/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15 GLH Pizza wheels 6 wide several availableask for price Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone bobble strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 GLHT trans shift rod (new) $35 this is the rod on the trans itself New shift rod retainer clips for 525 trans. 3 of them$15 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Ported exhaust manifold 1985 T-1 $100 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$45 34 lbs/hr set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $40 Ported G-head by M2 racing. Pressure tested and new valve job. Decked and never run. $395 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 Hardcover book by Bob Tasca You will be satisfied owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair stock 85 GLHT dogbone strut $10 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Ported exhaust manifold 1985 T-1 $100 Mopar coolant feed line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$45 set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $40 Ported G-head by M2 racing. Pressure tested and new valve job. Decked and never run. $395 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 Hardcover book by Bob Tasca You will be satisfied owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 Paperback book How to avoid speeding tickets The fast driver's handbook 290 pages by Matt Reynolds$8 ** Hundreds of old car magazines for sale the oldest is 1958 Sports Cars Illustrated Car Craft, Super Stock, Hot Rod, Popular Hot Rodding, National Dragster Hundreds of old car magazines for sale ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
A520 transaxle case with some misc internal gears, pieces, etc.. $25 Misc engine brackets, some are painted and some I had powder coated. Email me with whatever you need. These are mostly Turbo I and Turbo II engine brackets. 87 daytona Shelby Z Turbocharger o2 housing. This is the 2.25 unit. It's brand new. make offer 88 daytona Shelby Z turbocharger o2 housing. This is the one that has the wider flange bolt spacing. Make offer. 89 CSX engine wiring harness. It needs a lot of work to be a useable harness. It's basically good for connectors with lengths of wire, etc.. 90 Shadow VNT engine wiring harness - pretty much complete. In fact, the relays, solenoids, etc.. are there. I have the SBEC controller from the same car. Email me if you need this. 90 Daytona VNT rear wing. Intercooler from 89 Maserati TC w/16v engine $80 Brand New (NOS Mopar) radiator for 90 VNT cars. $200 Lower intercooler hose from 89 Daytona Shelby. $45 I have the following factory Chrysler Parts Books. These are huge 5-7 binders that have all the part numbers in them with exploded views, etc.. 1989 - Passenger car (includes CSX-VNT, Daytona Shelby, Lebaron GTC, Lancer Shelby, etc..) 1991 - Passenger car (includes the Spirit R/T, Daytona Shelby, etc..) 1993 - Passenger car (includes the Daytona Iroc R/T, etc...) Email me for prices on these. First come first served. I only have one of each. Chrysler Infinity factory radio from 92 Spirit R/T. Has the 5 band EQ, Infinity, etc.. in very nice shape. Make offer. Lower ground effect from 87 Shelby Charger. I forget if I have the right or left side.email me if you need either one and I'll go out there and double check which one I have. Looking for offers on this. Set of 4 Chrysler TC by Maserati rims. I'll send you pics of them and you can make me an offer. set of 4 Ultra High Performance brakes from the 89 Shelby Daytona. These are the 11.5 rotors, with the larger 60mm calipers in the front, and the 36mm calipers in the rear. I have pretty much everything you'd need to put these on your Charger, Omni, Shadow, or older Daytona. These brakes have unbelievable stopping power. Email me for pricing and let me know what all you need. AWD minivan axles (live axles in the rear) and the driveshaft. Have pics for serious parties. Pair of new Mopar NOS L-body door belt mouldings. (these fit the charger, turismo, rampage, etc..). 1989 Turbo II valve cover which I had professionally powder coated wrinkle black! Looks better than new. First $90 takes it. It features the newer style *One piece valve cover gasket* which makes pulling the valve cover on and off MUCH easier in terms of resealing it. 87 Turbo II 2 piece intake manifold. Fully ported and polished and professionally powder coated in wrinkle black. A show piece for a show/dragstrip car. Very nice intake. Opened up for a 52mm TB. Comes with a brand new Mopar throttle body gasket too. 87 Turbo II exhaust manifold. $15 takes it. Injector wiring harnesses for 2.2 and 2.5 Turbo cars from 1986 to 1993. Let me know which one you need. I have about 10 of them in really nice shape. Stock fuel pump motor from 1989 Daytona Shelby w/turbo II engine. Make offer. Overlay wiring harnesses to convert your Turbo I to Turbo II. This includes the AIS/TPS as well as the Charge Temp and heated (3 wire) o2 sensor. I also have them available in 4 wire o2 format. Professionally done by ex-Chrysler tech. Titanium valve spring retainers for Turbo III and 16v Maserati. Both are in stock. $185/set of 16. 1991-1993 Turbo III technical highlights booklet. This has all kinds of technical info on the Turbo III engine that you can't find anywhere else. $15 for the booklet or $30 for the booklet *with* the video! The video covers both Turbo II and Turbo III. Also have the 16v Maserati engine coverage as well available upon request - this is an additional 45 minutes or so of footage. Turbo III turbochargers. I have two of them. Both are used and both appear to be in good shape. Both were pulled from used motors and neither show any signs of smoke, neither have any broken fins, etc.. One is complete with the actuator and o2 housing and the other one is missing just the actuator. Make me an offer. Set of 4 turbo II injectors. $25 for the set. Set of 4 turbo I injectors. $20 for the set. Turbo III airbox. This does not include the snorkle. Make offer. Turbo III power steering pump with housing and pulley. Make offer. I have three of them all in various states, one has a pulley with a small chip in it, one has a bad plastic housing, and one looks mint. L-body A-pillar trim piece driver side $25 - light grey A-body A-pillar trim piece driver side $15 - beige Various factory SBECs, SMECs and logic modules. Let me know which year and model you need. Have a brand new in the box 93 Iroc R/T SBEC, and just about every one from 86 on
SD Parts for sale
I have 4 or 5 turbo exhaust manifolds 25$ each also 4 severe right angle hose this will help for 4 turbo inlets right angle. It has a directional vaine inside and buldges out slightly to keep the area the same through the turn.This is what it is made for. 35$ I can send a pic if anyone is interested I have more then one. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
86 Omni GLHS - Turbo II - 2 piece intake. Complete with Fuel Rail, Injectors, fuel pressure regulator, charge temp sensor, knock sensor, EGR, and support brace to head. Includes bolts to bolt it to the head. $225 87 Charger GLHS - Turbo II - 2 piece intake. Bare manifold - includes both halves. $175 88 Daytona Shelby Z - intake manifold. One piece design. Includes injectors, fuel rail, injector harness, charge temp, knock sensor, fuel pressure regulator and the unique bolts to bolt it to the Turbo II head. $125 Will include the larger 52mm TB with any of the above for an additional $25. 87-89 Turbo II exhaust manifold. $20 Lower intercooler hose - 89 Daytona Shelby Z. Fits Lancer, Daytona, Shadow, etc.. AWD axles from a 1990 Minivan. Also have the driveshaft as well. If you are considering building an AWD Shelby/Dodge these would be some of the easiest parts to use to adapt based on the spline count, etc.. $75 takes it all. This includes both rear axles, and the driveshaft assembly! Powder coated valve cover for 1989 and up Turbo II. Professionally powder coated wrinkle black, this valve cover is perfect for car shows, etc!! $125 takes it. This is the newer (one-piece) design gasket style cover. Also have a powder coated 2 piece intake manifold to match this valve cover which has been fully race ported and polished. Serious parties make me an offer on this piece. Pics available of all parts. Parts located in Florida. I only charge actual shipping costs. No charge for packaging. Email [EMAIL PROTECTED] -Rick ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale!
91 2.5 Turbo I intake manifold with throttle body, fuel rail, fuel injectors, fuel pressure regulator, injector wiring harness, knock sensor, etc.. This thing is *complete*. $75 89 Turbo II intake manifold. Same as above. Has *everything* you need to convert your car to Turbo II intake manifold. $125 89 Turbo II exhaust manifold - $20 Set of Turbo II injectors alone. Complete set of 4 - $40 Set of 804 injectors with very low miles on them. Work perfectly - $80 1989 A520 tranny case. It's all disassembled for you. (2+ hours worth of work). This is the case + the bearing support plate, etc.. It is missing the internal gears and ring and pinion. Basically perfect for someone that needs a case for their 87-89 A520 or A555 tranny. $25 takes it! 87 Turbo II 2 piece intake. Have one that is bare and one that has the fuel rail, throttle body, injectors, you name it. Make me an offer on these before they go to Ebay where Ebay takes a fee (along with PayPal). I only charge actual shipping charges. Parts located in Florida. Regards, Rick D. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
90 Maserati TC 16v cooling fan with shroud - complete $45 Pair of front Koni adjustable struts for 1987-89 Daytona Shelby. Not sure which other models/years they will bolt into. These are adjustable at the top of the strut just like the factory GLHS Koni's. $150 for the pair. 2.5 o2 housing - Turbo II. $90 2.25 o2 housing ported to 2.5 (for used with 86/87 GLHS or Turbo I and 87 Turbo II style downpipes) $45 88-92 2.5 Turbo I intake manifold. Same as turbo II except does not have charge temp hole drilled. $20 takes it. Comes with knock sensor. Same as above but comes with Throttle Body, fuel rail, injectors, pressure regulator and knock sensor. $100 (This is great for someone looking to convert their older Turbo I to Turbo II) Bogart Racing wheels. 13 ultralight racing wheels for 86/87 GLHS or any other FWD car with a 5x100mm bolt pattern. Rims are 13x7 and slicks are 24.5x7x13. Slicks still have a ton of meat left on them. Best offer takes them. This is for a pair of fronts. These are (in my opinion) the best racing wheels you can get for our cars. They weigh in at a scant 7.5lbs per wheel. Wheels come with custom spacers for the GLHS - and I was told they will fit other Shelby/Dodge platform cars with this same bolt pattern. Wastegate Acutator for Turbo III. Have two. One is powder coated gloss black and the other is stock. $80 for the powder coated one, $45 for the stock one. Wastegate Actuator for Turbo II. Good used stock piece. $45 Radiator/Intercooler from 1989 Daytona Shelby. Rad needs recore (some fin rot - I'd recore it). Intercooler looks good. Includes brackets that hold the two together, etc... any competent rad shop can recore this with a new core and you're good to go. $85 takes the whole thing. Or $100 takes the radiator fan with shroud as well. 90 Maserati TC 16v cruise control unit. - make offer Bezel for dash of 1990 Daytona. This is the long black plastic thing that goes in your dash. (spans from instrument panel to far right side of dash). I have three of them. One is w/alarm and two are w/out alarm. Make offer. Interested parties email me for pics. [EMAIL PROTECTED] Cheers, Rick ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale! tune up parts, pedal pads, powdercoated valve cover etc
http://www.turbododge.com/forums/showthread.php?p=609114#post609114 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
2 new Mopar door handles for omni/charger maybe more $20.00 each 2 new clutch and brake pedal pads for charger/omni 1 T2 logic module from daytona manual external map $45 obo. I don't see any markings but the connectors are red and blue if that helps. 1 Very nice red powder coated valve cover new later model $65 1 set of new stock champion spark plugs. offer?? set of new upper and lower radiator hose for charger/omni. offer. new fuel filter for charger/omni. offer?? One piece intake painted black and silver like T2. but in good condition. $30 2 wiring harnesses for T2 will have connectors for conversion. not sure if everything is there but lots of wire and connectors. offers?? still have a few 2.2 3/8 thicknes mild steel header flanges $30 each. New Hal effect sensor from mopar partno. 05213524 cost $85 make an offer. not sure if these are all the same but this was ordered for my charger. new Mopar performance plug wires in the box. $30 2 almost perfect tail lights for shelby charger $75 obo. May have some more stuff to add Thank you. TYPERT on turbododge.com and boostedneon on ebay. I can put these up as an auction if needed but a fee will apply. Paypal or M.O. accepted - pictures on request! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
For Sale: parts currently on e-bay motors: 1989 MP computer for 2.5 turbo, auto trans item#4528329679 1988 turbo one piece intake manifold (complete) item # 4528469954 Thanks, Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
Some parts up for grabs. Some are discontinued parts - no longer avail from Dodge. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7953434527ssPageName=ADME:B:LC:MT:1http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7953434527ssPageName=ADME:B:LC:MT:1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7953436727ssPageName=ADME:B:LC:MT:1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7953438047ssPageName=ADME:B:LC:MT:1http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7953438047ssPageName=ADME:B:LC:MT:1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7953440403ssPageName=ADME:B:LC:MT:1 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
2 new 88-89 t2 roller cams 60.00ea. 1 new 88 2.5 tbi roller cam 80.00 1 new super sixty cam 120.00 2 sets new t2 rods 120.00 a set 2 new 2.2 oil pumps 25.ooea 3 sets new 2.2 t2 pistons 60.00a set 2 almost new(less than 20 miles)t1 intakes and fuel rails100.00ea 1 new super sixty inner cooler 200.00 1 new complete gh body rad innercooler assm. 500.00 new clutch cables 15.00ea 2 used but tested and working nippondenzo alts. 25.00ea. 2 non ac alt brackets 25.00ea. 1 new alt/ac bracket 35.00 1 new pre 85 ac compresor 60.00 1 twin carb intake (stock 2bbl's) 80.00 85 glh interior- complete or pieces burgandy cond. 8-9 out of 10 best offer ( carpet has no wear,steering wheel still has the grain in the grip) 2 early l-body black /silver spoke steering wheels complete 80.00ea (look like glhs wheels but no leather,cond 8-9 out of 10) bill 99 dak R/T,97 integra gsr (wifes), 93 acclaim, 91 spirit R/T, 90 spirit es, 88 newyorker 2.5 t2, 88 csx-t, 87 glhs #709,86 sc,85 sc , 85 sc mas, 85 glh road racer, 85 turismo 'ugly',3-79 little red exress's, ) ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD parts for sale
I have some items for sale. These were overstock, discontinued, or personal items no longer needed. a555 with quaife. )miles, rebuilt by Cliff Ramsdell $1500 (1 person wants this, but if he doesn't get it, it's up for grabs) a568 (1990) small spline, with Phantom Grip LSD installed 0 miles, rebuilt by Cliff Ramsdell $800 Centerforce dual friction clutch kit ( pp and disc) $275 Centerforce dual friction T3 pressure plate only $150 Centerforce II clutch kit (pp and disc) $210 Centerforce II t3 pressure plate only $140 Three 1989 CSX recaro's. One is good, one has a bad back, one has a bod seat. Between them you can get two decent seats. Not perfect but good. $750 for all three 1989 CSX VNT rear wing $200 Complete 2003 SRT-4 motor/trans, engine harness, axles, shifter cables, ECU. Only missing the IC and the AC pulley which was damaged in the wreck -3600 miles on the set-up. $3500 firm 1986 GLHS #427 southern car all it's life, dissaseembled. Fresh rebuilt motor (original block) has original trans. Previous owner started sanding body, so will need paint. Floors, frame, etc... solid. has the koni's and other shelby specific items including dash plaque. $1800 OBO Bring a truck and trailer. This has a lot of pieces to it. Parting out 1987 GLHS had 54,000 miles, and has sat untouched since 1997 when the fuel pump died. shortblock $300 2 piece intake with fuel rail and TB $225 bare 2 pice intake (intake only) $160 rad/ IC assemly $375 rims $400 (need to be stripped and redone) steering wheel (condition 6/10) $90 valve cover $200 ohter parts available. just ask. NEW MP 1988 auto ECU p5249117 $100 used upgraded VNT 28 turbo. 2000 miles on it. Works great!!! $475 (new price is $850) one pair of MP front struts for daytona, spirit, lebaron, etc... (non-lody) $120 pair new Sealed power 1986-88 T-1 2.2 press pin pistons and wrist pins .50mm (.020) $60 set new TRW cam followers (early slider) $20 a set Mopar OEM 1985 pistons, (6) $110 for all 6 NOS t-3 exhaust cams $349 each (only have 5 left, these have been discontinued) NOS t-3 AC hoses $150 T-3 oil pump recall kit $200 1991 RT engine harness used $175 1991 t-1 Daytona engine harness used $125 1988 T-2 Daytona Harness used $150 1987 t-2 Daytona engine harness (missing wiper motor plug) $125 MP 2.0 forged crank. Special mopar performance crank, destroked to make a high reving 2.0 early model 8 bolt set-up. NS1 from mopar NEW $349 NEW Race torque converter approx 3800 stall speed, furnace braised fins, torrington bearings, hardened steel hub, etc... $450 1990-up rear louvers for Daytona. media blasted and powdercoated gloss black $275 (these are awesome looking) Pair of 89 CSX rear tailights $40 for the pair 1989 CSX left and right fenders $50 each (nice marron paint) 1987 shadow ES rear wing $80 1987-? dash (this came from and 88 CSX-t (no shelby badge) $30 1987/88 Daytona body parts. Have fenders, rear deck lid, doors etc... all good condition rust free southern car pieces make offer on any or buy whole shell of car for cheap!!! Prices do not include shipping. Money order preferred, will accpet paypal or credit card but add 3% for cc and paypal fees. call 281-288-4411 or email me Thanks, Cindy ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale - cheap
Apologies to Patrick - I wasn't trying to hijack the thread. Just a little brain dead tonight. 2.5 Turbo common block crank and rods. Stock journals, great shape - turn it, resize the rods with new bolts and you're ready to go. $20 plus shipping Non L Body 1 1/4 front sway bar for stamped arms (can be used in L-body by cutting 3/4 from each end) $20. CSX solid rotor rear disc brakes - complete - shoes still have Shelby stamp - still on car, will pull them when sold $50 Oil pan for common block $5 89 Turbo head from running engine - one burnt valve, but head is intact and should be crack free. $40 89 turbo valve cover for one piece gasket (o-ring style) $5 All prices plus hipping from 95403 (California). Pics available on request. Marc Medina www.pnw-sdac.org 89 Spirit ES 2.5 Turbo Intercooled Super60 http://www.geocities.com/mcm95403/ --- updated 11/12/04 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
2 piece intake manifold. This is out of a 1986 Omni GLHS. It comes with the following: Knock sensor Charge temp sensor All vacuum fittings EGR valve Fuel Rail All 4 fuel injectors Throttle Body w/AIS motor and TPS sensor I am asking $250 for all of the above OR If you want it with a 52mm TB add $25 OR If you want it with the injector harness add $35 If no one wants it with the injector harness, I will sell the injector harness for $40 to the first person to email me once the intake is sold. Keep in mind the injector harness is L-body specific. 86/87 GLHS logic module. This is a factory piece with factory CS part number. It has not been socketed, etc.. but I can have that done for an additional $40. Price of module - $125. 86 Omni GLHS Engine wiring harness. Complete with relays, etc.. I went through this thing (spent 3 nights working on it) and repaired any and all tiny little things that I could find wrong with it, (cut wires, wires that were hard due to heat, etc... (I use heat shrink and solder as I did when I used to wrench for Dodge). Then meticulously disassembled, cleaned, rerouted as necc, and re-taped the entire harness. As some of you know I presently offer reproduction GLHS overlay harnesses so I know these harnesses inside and out. This one is super clean and in perfect working order down to the fuse links, etc.. $300. I also have the alternator wiring harness from this car which I will let go for $100. If both are purchased together I will sell both for $350. This harness is NS-1 from the dealer and has been for many years. Turbocharger assembly out of 1986 Omni GLHS. The shaft is tight with almost zero play and spins very free. It comes with the factory o2 housing, actuator and coolant fittings. In fact, it still has the coolant lines on it which I will include in the deal. Price $250. Also, the Turbo II exhaust manifold is included in this price. SRT-4 shifter assembly. Works in Turbo Dodge cars with A523/A568 trannys. $50 takes it Iroc R/T shifter - $35 takes it Maserati 16v shifter with woodgrain shift knob - $75 takes Maserati 16v tranny from 1990 Maserati TC 16v car. Email for price - serious parties only please. Complete, freshly rebuilt Maserati 16v short block. Includes new oil pump, Masi 16v crank-polished and checked, Masi rods, (if you've seen these things you know how bad a$$ they are), and the factory fully forged pistons. Assembly meticulously assembled and gram weight balanced by me and all ring gaps recorded. All new Mopar rings and bearings. Email for price - serious parties only please. Maserati 16v factory IHI turbocharger - $350 Turbo III turbocharger. Used upgraded S-70 unit. $300. Excellent condition. Removed from car due to upgrade to hybrid unit. Includes actuator and o2 housing unique to the Turbo III unit. Turbo II upgraded turbocharger. Freshly rebuilt. Huge Turbo T/A compressor wheel inside CNC machined compressor cover with Stage III exhaust wheel! Price without actuator and without 2.5o2 housing - $525. (will throw in a 2.25 o2 housing for free if you want it for whatever reason-but I personally wouldn't run anything less than a 2.5 o2 housing on this puppy) Price w/actuator but w/out o2 housing - $575. Price w/actuator and w/2.5 Turbonetics o2 housing- $625. Titanium valve spring retainers - 16v Turbo III $180/set (qty16) Same as above but made for Maserati TC 16v engine - $180 (qty16) Turbo II valve cover (needs refinishing) $20 1986 Omni GLHS valve cover w/factory Mobil One plaque - $45 (needs refinishing to be perfect) A555/A568 Getrag Main shaft. (aka intermediate shaft). This is the shaft that takes a beating and usually gets destroyed due to brunelling of the shaft. This part has been NS-1 from the dealer for many years. I have one brand new in the Mopar wrapper. If someone out there needs this thing email me with your offer. I am looking for an offer commensurate with what I paid for it back when you *used* to be able to get them. Injector harness out of 1993 Iroc R/T. $50 A/C compressor from 1990 Maserati TC 16v car. $50 takes it Nippondenso alternator from 90 TC 16v car - $50 (condition unknown never tested) same as above but from 89 Omni - $40 (condition unknown, never tested) High performance coil for 2.2 8v cars. Chrome Accel coil. I got it from a buddy and never used it back when my car was 8v. I think I traded him something for it...$10 takes it. Turbo II training video - $25. Covers the 1987 Turbo II engine and discusses the differences between Turbo I and Turbo II. Very neat and fun to watch. I also include footage of a commercial with Carroll Shelby and some racing footage from the 89 SCCA runoffs. (87 Shelby CSX won 1st in it's class). Video of the 16v maserati engine and all it's unique pieces! Also include the footage of the 87 Turbo II engine mentioned above as well as the video of Shelby, the racing footage and a 1 hour
SD Parts for sale
Hello, I have the following for sale: If no one emails me by Sunday I'll put this stuff on ebay. Front lower chin spoiler - 1987-1988 Dodge Daytona Shelby Z. This one is in near mint condition. Almost every one I've seen has rips/tears/missing pieces, etc This one does not. It is red in color and came off an 87 Shelby Z - Turbo II car. $75 + shipping takes it. A/C compressor off Maserati TC 16v car. Spins good, appears to be in good condition. I have personally not tested it as my car does not have an A/C bracket to bolt it to. Best offer takes it. Maserati TC 16v Transmission. This is a Getrag 5 speed tranny in excellent condition. Serious parties make offer. Maserati TC 16v Turbocharger - $275 takes it. Spins great, tight impeller, no smoke, etc.. Slim Line Radiator Fan. This is one of those aftermarket slim line fans designed to fit in tight spaces. I have one on my 16v GLHS. I believe the one on my GLHS is a 14 fan and this one is the 16 fan. I am looking for $45 for it. I believe I paid $76 + tax for it. It works perfectly and comes with the shroud and two wires coming off it. Rear wing (hatch spoiler) off 1987 Shelby Z. This came from a red car. $20 takes it. Dealer gets $300+ for this thing. Rear wing (hatch spoiler) off 1989 Daytona Shelby. This is an 89-91 factory wing. I did some light sanding on it. It just needs a bit more sanding and prep work then it's ready to be shot whatever color you want. $50 takes it. Rear seats out of various Shelby Chargers and Charger GLHS's. Blue and Silver. Email me for pics if you are interested. 1991 Dodge Spirit R/T engine bay wiring harness - all connectors present and with their clips, etc.. Have one out of a Non-ABS car and one from an ABS car. I also have the o2/alternator harness and starter harnesses. email with offers. These are not hacked up harnesses. 1992-1993 Iroc R/T engine bay harness - excellent condition, all connectors present, etc.. this harness (as you know) has the power distribution center and has all it's relays and glass fuses in tact. Only wires cut on this harness are the two wires leading to the body computer. It is for a Non-ABS car. 1989 Dodge Minivan alternator wiring harness. 2.5L turbo I. $30 and in excellent condition! 88 Shelby Z alternator wiring harness - this is the harness you need to connect to a Mopar Performance Super 60 wiring harness for use in a GLHS S-60 application. $70 takes it. It's in very good shape and has been rebuilt by me, cleaned, all new tape, ohm checked, etc.. 1989 Turbo II stage II smec - $140 takes it. 14psi max boost, 200hp. for 8 valve engines. GLHS charger power rack and pinion - came out of my GLHS. Worked fine when I removed it. Removed it to install manual rack. $60 takes it. Email me at [EMAIL PROTECTED] Prices do not include shipping from South Florida. Rick D. 87 Shelby Charger GLH-S #160 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
Ok, I'm cleaning up my attic (expecting to move soon) and unfortunately need to sell a few spare pieces. Good used set of OE low-miles roller rockers from an '89 T-I Caravan. $40 + shipping. Spirit R/T center console in GREAT shape (both pieces w/ hardware). $40 + shipping. Greddy Type S BOV in great shape with flange and 2.25-inch pipe. $150 + shipping. '87 T-II radiator in great shape (no intercooler) with fan/brackets. $50 + shipping. The console will be shipped in (2) boxes to save on the box-size and shipping cost. I bought the BOV new a few months back and have since upgraded and no longer need it, and comes on a flanged pipe I made myself. The radiator has been re-cored and repainted so it will not need any *help* and looks very nice. Pictures of anything upon request. Thank you! Chris Faulk Lafayette, LA www.turbofreak.com http://www.turbofreak.com/ www.turbododge.com http://www.turbofreak.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Parts for sale
Decided to do a little mid-summer clean up and found a few parts that I will no longer be needing.Parts are located in Burlington, Ontario.about 30 minutes west of Toronto and 45 minutes north of Niagara Falls.Big parts must be picked up and anyone who spends $150 or more will recieve a free 6 port billet/anodized vacuume manifold.All front clips listed will not be separated and sold whole,they include fenders,hood,fascia and all ground effects forward of the doors and they are all in excellent condition.I have a whole slew of other parts that I'll be listing soon. I can take digital pics for anyone thats interested in anything.Buy lots and get a deal.I can deliver some of the big stuff for the price of fuel(thirsty 360 Ramcharger) within a 1 hour radius.Thanks for looking. Frank _ 2 complete Shelby Charger front clips _'87/'88 Shelby Z front clip _'89 Daytona Shelby front clip _pair of '87/'88 power Shelby Z doorsrust free with gfx _pair of '89 power Daytona Shelby doors.rust free with gfx _2 complete '88 Turbo II motors- both recent rebuildsone has 30,000 Kms and the other has 15,000 Kms _complete '89 2.5 T-Icome see and hear it running! _'89 twin pivot K-frame _'88 555 with just under 100,000 kms _11 vented rear disk assemblyincludes calipers,spindles,cables,prop valve,etc. _'89 G-body T-I rad.less than a month old _complete '89 T-I wire harnessincludes SMEC _2 sets 6.5 crab wheels _2 complete interiors for '89 and older Daytona's...both are grey and both are in very good condition _also parting out a complete '89 T-I 5spd Daytona ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html